Re: More 2924Xl switch IOS upgrade problem
On Fri, 8 Sep 2000, Richard wrote: > The switch I am trying to upgrade is a 2924XL w/ approximately 1.8flash and > 5meg of ram. This comes with a standard IOS version. After upgrading it to > enterprise edition same version number as its original one, I get boot > problem after rebooting. I'd appreciated some pointers on how to getting > this backup. If this switch can't run enterprise edition, how would I go > about putting its standard version back on? Cisco's first run of 2924XL switches were of a different architecture. The cabinet is physically deeper, and the RAM is 4MB rather than 8. They take a different series of IOS images, specifically compiled for the early hardware. It's somewhat confusing on CCO. Try this link for images for the earlier 4MB switches: http://www.cisco.com/cgi-bin/tablebuild.pl/cat2900XL-4MB Archived earlier images are hree: http://www.cisco.com/cgi-bin/tablebuild.pl/cat2900XL-4MB-archives You'll need CCO access. -- Jay Hennigan - Network Administration - [EMAIL PROTECTED] NetLojix Communications, Inc. NASDAQ: NETX - http://www.netlojix.com/ WestNet: Connecting you to the planet. 805 884-6323 **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
More 2924Xl switch IOS upgrade problem
The switch I am trying to upgrade is a 2924XL w/ approximately 1.8flash and 5meg of ram. This comes with a standard IOS version. After upgrading it to enterprise edition same version number as its original one, I get boot problem after rebooting. I'd appreciated some pointers on how to getting this backup. If this switch can't run enterprise edition, how would I go about putting its standard version back on? Thanks in advanve for any input. C2900XL Boot Loader (C2900-HBOOT-M) Version 11.2(8)SA2, RELEASE SOFTWARE (fc1) Compiled Fri 24-Apr-98 10:51 by rheaton starting... Base ethernet MAC Address: 00:90:ab:f7:63:c0 Xmodem file system is available. Initializing Flash... flashfs[0]: 71 files, 3 directories flashfs[0]: 0 orphaned files, 0 orphaned directories flashfs[0]: Total bytes: 1728000 flashfs[0]: Bytes used: 1655808 flashfs[0]: Bytes available: 72192 flashfs[0]: flashfs fsck took 4 seconds. ...done Initializing Flash. Loading "flash:c2900XL-c3h2s-mz-112.8.5-SA6.bin"...Bootable image segment 12288 address range [0x34ca40, 0x3000] not in range [0x30, 0x33f98c]. Error loading "flash:c2900XL-c3h2s-mz-112.8.5-SA6.bin" Interrupt within 5 seconds to abort boot process. Boot process failed... The system is unable to boot automatically. The BOOT environment variable needs to be set to a bootable image. switch: set ?= BOOT=flash:c2900XL-c3h2s-mz-112.8.5-SA6.bin MAC_ADDR=00:90:AB:F7:63:C0 MOTHERBOARD_ASSEMBLY_NUM=73-2910-05 MOTHERBOARD_SERIAL_NUM=FAA02349HM6 SYSTEM_SERIAL_NUM=FAA0234W0HW help= switch: **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
