Re: Multiplexing/Load balancing
Check the archives for my earlier post regarding this topic. Inverse ATM multiplexing (where available) seems to be a very good option. Frac T3 is another option. Muxed T1 lines seem to be falling out of favor. Craig At 09:17 AM 2/28/2001 -0600, you wrote: >You know I've never given this much thought I just assumed it was possible >to multiplex serveral T1 lines. >If I wanted a 10mb connection between to points and I had 6 >individual T1 lines can I/do I multiplex the lines or do I have to load >balance between all six lines. The later doesn't make much since to me >because I'd have to have a Router with 6 WAN ports to support my a 10mb >connection. Maybe my thinking is all wrong on this. Any help would be >appreciated. > >Thanks, > >Keith > > >_ >FAQ, list archives, and subscription info: >http://www.groupstudy.com/list/cisco.html >Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Multiplexing/Load balancing
Larscom makes equipment to do this, I'm sure there are others. We have a couple of sites that take multiple t1's and combine them for higher bandwidth. it looks something like this cisco hssi port (4.5mb) - larscom t1 mux -3 t1's- larscom t1 mux - cisco hssi port (4.5mb) hope this is helpful, dave h -Original Message- From: Keith Townsend [mailto:[EMAIL PROTECTED]] Sent: Wednesday, February 28, 2001 10:18 AM To: [EMAIL PROTECTED] Subject: Multiplexing/Load balancing You know I've never given this much thought I just assumed it was possible to multiplex serveral T1 lines. If I wanted a 10mb connection between to points and I had 6 individual T1 lines can I/do I multiplex the lines or do I have to load balance between all six lines. The later doesn't make much since to me because I'd have to have a Router with 6 WAN ports to support my a 10mb connection. Maybe my thinking is all wrong on this. Any help would be appreciated. Thanks, Keith _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Multiplexing/Load balancing
You know I've never given this much thought I just assumed it was possible to multiplex serveral T1 lines. If I wanted a 10mb connection between to points and I had 6 individual T1 lines can I/do I multiplex the lines or do I have to load balance between all six lines. The later doesn't make much since to me because I'd have to have a Router with 6 WAN ports to support my a 10mb connection. Maybe my thinking is all wrong on this. Any help would be appreciated. Thanks, Keith _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
