Re: NT1 needed
On Feb 5, 4:46am, Brian wrote: } } Does anyone know of an NT1 model that will allow the connection of 2 S/T } interfaces (2 different routers) so that each can use a single chennel of } the single ISDN line connected to it (like a splitter). The S/T bus is a parallel bus. You can connect up to eight devices to it (they are distinguished by their TEI -- Terminal Endpoint Idenifier). You don't need a special NT1, just a splitter which you plug into any NT1. I have seen eight-way splitters built just for this purpose, but I don't know where to get them. }-- End of excerpt from Brian _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: NT1 needed
Brian, I have seen this done where six ISDN phones were connected to a BRI but only two could be used at one time. Mike John Nemeth [EMAIL PROTECTED] 11/09 5:34 AM On Feb 5, 4:46am, Brian wrote: } } Does anyone know of an NT1 model that will allow the connection of 2 S/T } interfaces (2 different routers) so that each can use a single chennel of } the single ISDN line connected to it (like a splitter). The S/T bus is a parallel bus. You can connect up to eight devices to it (they are distinguished by their TEI -- Terminal Endpoint Idenifier). You don't need a special NT1, just a splitter which you plug into any NT1. I have seen eight-way splitters built just for this purpose, but I don't know where to get them. }-- End of excerpt from Brian _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: NT1 needed
On Apr 1, 3:29am, "Mike Momb" wrote: } } I have seen this done where six ISDN phones were connected to a BRI but only two could be used at one time. Yes, that is because there are only two B channels. } John Nemeth [EMAIL PROTECTED] 11/09 5:34 AM } On Feb 5, 4:46am, Brian wrote: } } } } Does anyone know of an NT1 model that will allow the connection of 2 S/T } } interfaces (2 different routers) so that each can use a single chennel of } } the single ISDN line connected to it (like a splitter). } } The S/T bus is a parallel bus. You can connect up to eight } devices to it (they are distinguished by their TEI -- Terminal Endpoint } Idenifier). You don't need a special NT1, just a splitter which you } plug into any NT1. I have seen eight-way splitters built just for this } purpose, but I don't know where to get them. } }-- End of excerpt from "Mike Momb" _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: NT1 needed
http://www.nt1solutions.com/ makes NT-1 devices and splitters. -Original Message- From: Mike Momb [mailto:[EMAIL PROTECTED]] Sent: Thursday, November 09, 2000 7:54 AM To: [EMAIL PROTECTED]; [EMAIL PROTECTED]; [EMAIL PROTECTED] Subject: Re: NT1 needed Brian, I have seen this done where six ISDN phones were connected to a BRI but only two could be used at one time. Mike John Nemeth [EMAIL PROTECTED] 11/09 5:34 AM On Feb 5, 4:46am, Brian wrote: } } Does anyone know of an NT1 model that will allow the connection of 2 S/T } interfaces (2 different routers) so that each can use a single chennel of } the single ISDN line connected to it (like a splitter). The S/T bus is a parallel bus. You can connect up to eight devices to it (they are distinguished by their TEI -- Terminal Endpoint Idenifier). You don't need a special NT1, just a splitter which you plug into any NT1. I have seen eight-way splitters built just for this purpose, but I don't know where to get them. }-- End of excerpt from Brian _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: NT1 needed
Adtran NT1 ACE will do the job nicely. Brian [EMAIL PROTECTED] wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... Does anyone know of an NT1 model that will allow the connection of 2 S/T interfaces (2 different routers) so that each can use a single chennel of the single ISDN line connected to it (like a splitter). Brian --- Brian Feeny, CCNP, CCDP [EMAIL PROTECTED] Network Administrator ShreveNet Inc. (ASN 11881) _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: NT1 needed
Brian, You don't need a multi-port NT1. The wiring is a bus topology. The same way you connect multiple phones at home, just four wires instead of two. Rodgers Moore "Brian" [EMAIL PROTECTED] wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... Does anyone know of an NT1 model that will allow the connection of 2 S/T interfaces (2 different routers) so that each can use a single chennel of the single ISDN line connected to it (like a splitter). Brian --- Brian Feeny, CCNP, CCDP [EMAIL PROTECTED] Network Administrator ShreveNet Inc. (ASN 11881) _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
NT1 needed
Does anyone know of an NT1 model that will allow the connection of 2 S/T interfaces (2 different routers) so that each can use a single chennel of the single ISDN line connected to it (like a splitter). Brian --- Brian Feeny, CCNP, CCDP [EMAIL PROTECTED] Network Administrator ShreveNet Inc. (ASN 11881) _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: NT1 needed
Tone Commander NT1U-220TC has two terminal connections. That *implies* that you could use two devices simultaneously. I would suggest you dig up some documentation to verify this before you run out and buy one though... Good luck, Jeff Odell CCNP CCDA -Original Message- From: Brian [mailto:[EMAIL PROTECTED]] Sent: Friday, October 20, 2000 2:39 PM To: [EMAIL PROTECTED] Subject: NT1 needed Does anyone know of an NT1 model that will allow the connection of 2 S/T interfaces (2 different routers) so that each can use a single chennel of the single ISDN line connected to it (like a splitter). Brian --- Brian Feeny, CCNP, CCDP [EMAIL PROTECTED] Network Administrator ShreveNet Inc. (ASN 11881) _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: NT1 needed
I think most NT-1's have multiple S/T ports. I have an old meridian which has 2 ports and I use it to split my b-channels. The black box NT-1's will also work. Regards, Aaron K. Dixon -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Odell, Jeff Sent: Friday, October 20, 2000 5:47 PM To: 'Brian'; [EMAIL PROTECTED] Subject: RE: NT1 needed Tone Commander NT1U-220TC has two terminal connections. That *implies* that you could use two devices simultaneously. I would suggest you dig up some documentation to verify this before you run out and buy one though... Good luck, Jeff Odell CCNP CCDA -Original Message- From: Brian [mailto:[EMAIL PROTECTED]] Sent: Friday, October 20, 2000 2:39 PM To: [EMAIL PROTECTED] Subject: NT1 needed Does anyone know of an NT1 model that will allow the connection of 2 S/T interfaces (2 different routers) so that each can use a single chennel of the single ISDN line connected to it (like a splitter). Brian --- Brian Feeny, CCNP, CCDP [EMAIL PROTECTED] Network Administrator ShreveNet Inc. (ASN 11881) _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: NT1 needed
Hey Brian, Motorola has one it is call NT1D. http://www.motorola.com/MIMS/ISG/mnd/products/nt1d_-_isdn_network_terminatio n/index.html#summary Craig -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Brian Sent: October 20, 2000 5:39 PM To: [EMAIL PROTECTED] Subject: NT1 needed Does anyone know of an NT1 model that will allow the connection of 2 S/T interfaces (2 different routers) so that each can use a single chennel of the single ISDN line connected to it (like a splitter). Brian --- Brian Feeny, CCNP, CCDP [EMAIL PROTECTED] Network Administrator ShreveNet Inc. (ASN 11881) _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
