As per RFC draft-ietf-pim-dm-new-v2-03.txt
Prune messages are sent towards the upstream
neighbor for S to indicate that traffic from S addressed to group G is
not desired. In the case of two downstream routers A and B, where A
wishes to continue receiving data and B does not, A will send a Join in
response to B's Prune to override the Prune. This is the only situation
in PIM-DM in which a Join message is used. Finally, a Graft message is
used to re-join a previously pruned branch to the delivery tree
Does it help? There is two times 'ip igmp join-group' in your emai. Do
you mean 'no ip igmp join-group' on the second time?
John Tafasi @groupstudy.com em 14/03/2003 07:41:35
Favor responder a John Tafasi
Enviado Por: [EMAIL PROTECTED]
Para: [EMAIL PROTECTED]
cc:
Assunto:R6 does not send prune message [7:65415]
Hi Group,
When i configured r6 with ip igmp join-group command it generated I graft
message to the ustream router, but it did not generat a prune message when
i
entered ip igmp join-group. Could some one just tell me why ?
BTW the network is runing dense mode multicast.
Thanks
John Tafasi
r6(config-if)#ip igmp join-group 225.22.2.2
19:30:17: PIM: Building Graft message for 225.22.2.2, Serial0: no entries
r6(config-if)#
r6(config-if)#
r6(config-if)#no ip igmp join-group 225.22.2.2
r6(config-if)#end
r6#
19:37:15: %SYS-5-CONFIG_I: Configured from console by console
19:37:16: PIM: Send v2 Hello on Serial0
19:37:18: PIM: Received v2 Hello on Serial0 from 150.50.100.5
19:37:22: PIM: Received v2 Hello on Serial0 from 150.50.100.2
r6#
r6#
19:37:46: PIM: Send v2 Hello on Serial0
19:37:48: PIM: Received v2 Hello on Serial0 from 150.50.100.5
19:37:52: PIM: Received v2 Hello on Serial0 from 150.50.100.2
19:38:16: PIM: Send v2 Hello on Serial0
19:38:18: PIM: Received v2 Hello on Serial0 from 150.50.100.5
19:38:22: PIM: Received v2 Hello on Serial0 from 150.50.100.2
19:38:46: PIM: Send v2 Hello on Serial0
19:38:48: PIM: Received v2 Hello on Serial0 from 150.50.100.5
19:38:52: PIM: Received v2 Hello on Serial0 from 150.50.100.2
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=65435t=65415
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]