RE: Can't Ping e0/0 [7:6513]
Jason, Post us your config and we could probably get to the problem much quicker. Also can you tell us the Ip addresses / subnet masks and default gateway which is setup on the pc's. Cheers -Original Message- From: Jason Witover [mailto:[EMAIL PROTECTED]] Sent: 30 May 2001 21:39 To: [EMAIL PROTECTED] Subject: Can't Ping e0/0 [7:6513] I have a 2611 with a t0/0 an e0/0 and a s0/0. The router was set up by someone else who made it a source bridge using the s0/0 interface. I am trying to interface a tiny network of 5 PC's that are on a 3com switch to that e0/0 interface. I gave the interface an IP address on the same schema as the 5 pc's and gave the no shut command on it. I get a link light on both the switch and the router. When I do a show interface e0/0 it says the interface is up and the line protocol is up. I can ping my own e0/0 interface but every other pc on the network can not ping that interface, nor can the router ping any other computer. I also typed in ip routing to see if that would fix it, but it did not. I shut the interface and no shut the interface a few times, but still no help. I know you are all much much smarter than me.. so PLEASE teach me the errors of my ways. Thanks group! Jason FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=6519t=6513 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Can't Ping e0/0 [7:6513]
*giggle* can we see your config? - Original Message - From: Jason Witover To: Sent: Wednesday, May 30, 2001 4:38 PM Subject: Can't Ping e0/0 [7:6513] I have a 2611 with a t0/0 an e0/0 and a s0/0. The router was set up by someone else who made it a source bridge using the s0/0 interface. I am trying to interface a tiny network of 5 PC's that are on a 3com switch to that e0/0 interface. I gave the interface an IP address on the same schema as the 5 pc's and gave the no shut command on it. I get a link light on both the switch and the router. When I do a show interface e0/0 it says the interface is up and the line protocol is up. I can ping my own e0/0 interface but every other pc on the network can not ping that interface, nor can the router ping any other computer. I also typed in ip routing to see if that would fix it, but it did not. I shut the interface and no shut the interface a few times, but still no help. I know you are all much much smarter than me.. so PLEASE teach me the errors of my ways. Thanks group! Jason FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=6522t=6513 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
