RE: Help !! 3620 + NM-1E2W + WIC-2T = trouble [7:31976]
From Cisco's web site, it doesn't look like the WIC-2T is supported in the NM-1E2W. The doc on the WIC-2T only lists the following: NM-1FE1R2W NM-1FE2W NM-2FE2W NM-2W The same doc says that the WIC-2T isn't supported in the following: Cisco 1600 NM-1E2W NM-1E1R2W NM-2E2W Sorry. -Original Message- From: tmjf.com [mailto:[EMAIL PROTECTED]] Sent: Tuesday, January 15, 2002 4:28 AM To: [EMAIL PROTECTED] Subject: Help !! 3620 + NM-1E2W + WIC-2T = trouble [7:31976] I have a 3620 with 64 MB RAM 16 MB Flash. I installed module NM-1E2W and it works fine, but when I install the WIC-2T in either WAN slots it doesn't recognize it. The WIC-2T works on my 1720 and 2610. I've tried 2 different IOS already (IOS 12.2 Enterprise Plus IPSec 56 and 12.1 IP Plus IPSEC 56). Any input will be appreciated. Thanks! Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=31981t=31976 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Help !! 3620 + NM-1E2W + WIC-2T = trouble [7:31976]
Hi, WIC-2T is supported on 3660/3640/3620 if the following modules are installed on the 3660/3640/3620: NM-1FE2W,NM-1FE1R2W,NM-2FE2W,and NM-2W WIC-2T is not supported on the following modules on 3660/3640/3620: NM-1E2W, NM-1E1R2W,and NM-2E2W Regards, Georg Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=31980t=31976 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Help !! 3620 + NM-1E2W + WIC-2T = trouble [7:31976]
I have a 3620 with 64 MB RAM 16 MB Flash. I installed module NM-1E2W and it works fine, but when I install the WIC-2T in either WAN slots it doesn't recognize it. The WIC-2T works on my 1720 and 2610. I've tried 2 different IOS already (IOS 12.2 Enterprise Plus IPSec 56 and 12.1 IP Plus IPSEC 56). Any input will be appreciated. Look likes 3600 doesn`t support WIC-2T on NM-1E2W. See the following WIC-2T URL : http://www.cisco.com/warp/customer/107/wic-2t.shtml and the Hardware Compatibility Matrix: http://www.cisco.com/warp/customer/471/wics.html Mine 3640 does recognize WIC-2T on NM-2FE2W though. Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=31982t=31976 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Help !! 3620 + NM-1E2W + WIC-2T = trouble [7:31976]
You guys are great and saved me a ton of time! have a great day! tmjf.com wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... I have a 3620 with 64 MB RAM 16 MB Flash. I installed module NM-1E2W and it works fine, but when I install the WIC-2T in either WAN slots it doesn't recognize it. The WIC-2T works on my 1720 and 2610. I've tried 2 different IOS already (IOS 12.2 Enterprise Plus IPSec 56 and 12.1 IP Plus IPSEC 56). Any input will be appreciated. Thanks! Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=31983t=31976 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Help !! 3620 + NM-1E2W + WIC-2T = trouble [7:31976]
According to Cisco's HW/SW compatibility matrix, you need one of the following IOS versions to support a WIC-2T on a 3620: 12.0(7)XK, 12.1(1)T, 12.1(5)YB, 12.2(1), 12.2(2)T, 12.2(2)XT Don't assume that if you try a later version of IOS that it's definitely going to support your card. Try to get one of the versions listed. Craig At 07:27 AM 1/15/2002 -0500, you wrote: I have a 3620 with 64 MB RAM 16 MB Flash. I installed module NM-1E2W and it works fine, but when I install the WIC-2T in either WAN slots it doesn't recognize it. The WIC-2T works on my 1720 and 2610. I've tried 2 different IOS already (IOS 12.2 Enterprise Plus IPSec 56 and 12.1 IP Plus IPSEC 56). Any input will be appreciated. Thanks! Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=31985t=31976 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Help !! 3620 + NM-1E2W + WIC-2T = trouble [7:31976]
You also need a nm with a fast eth interface. -Original Message- From: Craig Columbus [mailto:[EMAIL PROTECTED]] Sent: Tuesday, January 15, 2002 8:02 AM To: [EMAIL PROTECTED] Subject: Re: Help !! 3620 + NM-1E2W + WIC-2T = trouble [7:31976] According to Cisco's HW/SW compatibility matrix, you need one of the following IOS versions to support a WIC-2T on a 3620: 12.0(7)XK, 12.1(1)T, 12.1(5)YB, 12.2(1), 12.2(2)T, 12.2(2)XT Don't assume that if you try a later version of IOS that it's definitely going to support your card. Try to get one of the versions listed. Craig At 07:27 AM 1/15/2002 -0500, you wrote: I have a 3620 with 64 MB RAM 16 MB Flash. I installed module NM-1E2W and it works fine, but when I install the WIC-2T in either WAN slots it doesn't recognize it. The WIC-2T works on my 1720 and 2610. I've tried 2 different IOS already (IOS 12.2 Enterprise Plus IPSec 56 and 12.1 IP Plus IPSEC 56). Any input will be appreciated. Thanks! Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=31989t=31976 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
