Re: Help with irksome situation = ( [7:7102]
Uhh, NAT perhaps!? -humboldt Peter Slow, CCNP Voice Specialist Network Engineer Planetary Networks 535 West 34th Street New York, NY 10001 Cell:(516) 782.1535 Desk: (646) 792.2395 Mail: [EMAIL PROTECTED] Fax:(646) 792.2396 - Original Message - From: "Bob Edmonds" To: Sent: Monday, June 04, 2001 12:50 PM Subject: Help with irksome situation = ( [7:7102] > I have this set up below: My problem is that I can not ping E0 on R2501 > from anywhere. I also cannot enter a static route to it. How would I get > the 2501 to act as a gateway between the two networks? I've done some > searches and looked over some books but I'm still not getting out through > E0. This is just a simple home lab but it is begining to irk me, any help > would be grealy appreciated. > > Internet/Cable modem > | > | > | > E0: 206.107.237.12 255.255.255.0 > R2501 > S0:172.16.20.1 255.255.255.0 > | > | > | > | > S0: 172.16.20.2 255.255.255.0 > R2521 > S1: 172.16.40.1 255.255.255.0 > | > | > | > S0: 172.16.40.2 255.255.255.0 > R2502 > > > > > > > > > Building configuration... > > Current configuration: > ! > version 11.2 > no service password-encryption > no service udp-small-servers > no service tcp-small-servers > ! > hostname Router > ! > enable secret 5 $1$aifs$0SCPCn.iDMa/ISoNcv.gH. > ! > ip dhcp-server 10.1.1.1 > ! > interface Ethernet0 > ip address 206.107.237.12 255.255.255.0 > ! > interface Serial0 > ip address 172.16.20.1 255.255.255.0 > no fair-queue > ! > interface Serial1 > no ip address > shutdown > ! > no ip classless > ip route 172.16.40.0 255.255.255.0 172.16.20.2 > ! > ! > line con 0 > line aux 0 > line vty 0 4 > password > login > line vty 5 197 > password > login > ! > end Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=7127&t=7102 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Help with irksome situation = ( [7:7102]
You are missing a default route to the internet. ip route 0.0.0.0 0.0.0.0 206.107.237.x where x is the address of the cable modem. However if the 2521 can't see it, either somthing else is wrong. Are the interfaces Up,Up? A sh ip int bri should tell the tale on the 2501. HTH Doug Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=7128&t=7102 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Help with irksome situation = ( [7:7102]
Where did you get the 206.107.237.0 address? - Original Message - From: "Bob Edmonds" To: Sent: Monday, June 04, 2001 9:50 AM Subject: Help with irksome situation = ( [7:7102] > I have this set up below: My problem is that I can not ping E0 on R2501 > from anywhere. I also cannot enter a static route to it. How would I get > the 2501 to act as a gateway between the two networks? I've done some > searches and looked over some books but I'm still not getting out through > E0. This is just a simple home lab but it is begining to irk me, any help > would be grealy appreciated. > > Internet/Cable modem > | > | > | > E0: 206.107.237.12 255.255.255.0 > R2501 > S0:172.16.20.1 255.255.255.0 > | > | > | > | > S0: 172.16.20.2 255.255.255.0 > R2521 > S1: 172.16.40.1 255.255.255.0 > | > | > | > S0: 172.16.40.2 255.255.255.0 > R2502 > > > > > > > > > Building configuration... > > Current configuration: > ! > version 11.2 > no service password-encryption > no service udp-small-servers > no service tcp-small-servers > ! > hostname Router > ! > enable secret 5 $1$aifs$0SCPCn.iDMa/ISoNcv.gH. > ! > ip dhcp-server 10.1.1.1 > ! > interface Ethernet0 > ip address 206.107.237.12 255.255.255.0 > ! > interface Serial0 > ip address 172.16.20.1 255.255.255.0 > no fair-queue > ! > interface Serial1 > no ip address > shutdown > ! > no ip classless > ip route 172.16.40.0 255.255.255.0 172.16.20.2 > ! > ! > line con 0 > line aux 0 > line vty 0 4 > password > login > line vty 5 197 > password > login > ! > end Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=7141&t=7102 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Help with irksome situation = ( [7:7102]
...he needs to do nat as well. he has an entire network, and only one IP address Peter Slow, CCNP Voice Specialist Network Engineer Planetary Networks 535 West 34th Street New York, NY 10001 Cell:(516) 782.1535 Desk: (646) 792.2395 Mail: [EMAIL PROTECTED] Fax:(646) 792.2396 - Original Message - From: "Doug Lockwood" To: Sent: Monday, June 04, 2001 3:32 PM Subject: RE: Help with irksome situation = ( [7:7102] > You are missing a default route to the internet. > > ip route 0.0.0.0 0.0.0.0 206.107.237.x where x is the address of the cable > modem. > > However if the 2521 can't see it, either somthing else is wrong. > > Are the interfaces Up,Up? > > A sh ip int bri should tell the tale on the 2501. > > HTH > > Doug Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=7140&t=7102 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Help with irksome situation = ( [7:7102]
I believe the CM works as a bridge. Has your provider supplied you with the 207 address? - Original Message - From: "Doug Lockwood" To: Sent: Monday, June 04, 2001 12:32 PM Subject: RE: Help with irksome situation = ( [7:7102] > You are missing a default route to the internet. > > ip route 0.0.0.0 0.0.0.0 206.107.237.x where x is the address of the cable > modem. > > However if the 2521 can't see it, either somthing else is wrong. > > Are the interfaces Up,Up? > > A sh ip int bri should tell the tale on the 2501. > > HTH > > Doug Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=7144&t=7102 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Help with irksome situation = ( [7:7102]
Peter; Spot on. NAT and a route. Doug Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=7153&t=7102 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Help with irksome situation = ( [7:7102]
Hey thanks to all.. You all were a huge help. It's working fine now. the 206 address comes from buckeye cable! ""Bob Edmonds"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > I have this set up below: My problem is that I can not ping E0 on R2501 > from anywhere. I also cannot enter a static route to it. How would I get > the 2501 to act as a gateway between the two networks? I've done some > searches and looked over some books but I'm still not getting out through > E0. This is just a simple home lab but it is begining to irk me, any help > would be grealy appreciated. > > Internet/Cable modem > | > | > | > E0: 206.107.237.12 255.255.255.0 > R2501 > S0:172.16.20.1 255.255.255.0 > | > | > | > | > S0: 172.16.20.2 255.255.255.0 > R2521 > S1: 172.16.40.1 255.255.255.0 > | > | > | > S0: 172.16.40.2 255.255.255.0 > R2502 > > > > > > > > > Building configuration... > > Current configuration: > ! > version 11.2 > no service password-encryption > no service udp-small-servers > no service tcp-small-servers > ! > hostname Router > ! > enable secret 5 $1$aifs$0SCPCn.iDMa/ISoNcv.gH. > ! > ip dhcp-server 10.1.1.1 > ! > interface Ethernet0 > ip address 206.107.237.12 255.255.255.0 > ! > interface Serial0 > ip address 172.16.20.1 255.255.255.0 > no fair-queue > ! > interface Serial1 > no ip address > shutdown > ! > no ip classless > ip route 172.16.40.0 255.255.255.0 172.16.20.2 > ! > ! > line con 0 > line aux 0 > line vty 0 4 > password > login > line vty 5 197 > password > login > ! > end Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=7213&t=7102 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
