Re: Novell Server node address change [7:55264]
Priscilla Oppenheimer wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... The number after network.node is the IPX socket number, not an SPX socket snip for clarity Were those numbers you told us made up to hide the details for security reasons? Can you tell us the actual numbers? CL: just to improve my own understanding of things ( well, OK, and to be a smart ass too ), why would one consider sanitizing MAC addresses for security reasons? :- maybe on a wireless network? snip some more Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=55345t=55264 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Novell Server node address change [7:55264]
You're right, but it was easier to type a made up 8+12+4 digit number than to walk between my server and workstation memorising at part of it everytime :-) But, however, had I specified in my Novell user configuration that the admin could only login from the PC I have in my bullet/sound proof box with 7 combinations keys on it, you could by knowing my MAC address (and of course the admin's password) hardcode your NIC to have the same MAC, break into our office, connect your PC to our network, and login as admin. A little bit far out, but you'll never know :-) Ole Ole Drews Jensen Systems Network Manager CCNP, MCSE, MCP+I RWR Enterprises, Inc. [EMAIL PROTECTED] http://www.RouterChief.com The Long and Winding Road Sent by: [EMAIL PROTECTED] 10/11/2002 01:57 AM Please respond to The Long and Winding Road To: [EMAIL PROTECTED] cc: Subject:Re: Novell Server node address change [7:55264] Priscilla Oppenheimer wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... The number after network.node is the IPX socket number, not an SPX socket snip for clarity Were those numbers you told us made up to hide the details for security reasons? Can you tell us the actual numbers? CL: just to improve my own understanding of things ( well, OK, and to be a smart ass too ), why would one consider sanitizing MAC addresses for security reasons? :- maybe on a wireless network? snip some more Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=55404t=55264 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Novell Server node address change [7:55264]
You might try and clear the routing and network tables (I believe the command is clear routes although it's been a while) on the server. This will cause the server to resend SAPs to populate its tables. Sometimes the routing tables on a Novell Server (especially 4.10) gets messed up and won't dump the corrupted information. Dave Williams, CCDA, CCNA, CCSA Senior Network Engineer (402) 661-2143 -Original Message- From: Ole D Jensen [mailto:[EMAIL PROTECTED]] Sent: Thursday, October 10, 2002 8:40 AM To: [EMAIL PROTECTED] Subject: OT: Novell Server node address change [7:55264] This is a good step off the Cisco topic, but since it is in the network world, I'm sure at least one person on this list knows the answer. I have an old Novell NetWare 4.10 running, and sometimes it start changing the address of one specific workstation. I have looked over and over at the workstation to find a possible bug, but everything lookes fine, and reinstalling the Novell Client has not changed anything. Every 30 seconds, the Novell Server changes the node address back and forth: 10-10-028:20:00 am:Server-4.10-3191 Server WORKSTATION_27 Address has changed from 0040:123456789012:1234 to 0040:123456789012:3412 Information came from router at 123456789012 10-10-028:20:01 am:Server-4.10-3191 Server WORKSTATION_27 Address has changed from 0040:123456789012:3412 to 0040:123456789012:1234 Information came from router at 123456789012 To avoid misunderstandings, the WORKSTATION_27 is the workstation that it keeps changing the address on. I am not sure if it's the workstation itself that changes this address or the server, but it also says that the information came from router 123456789012 which is the workstation. I'm sure there's a logical explanation for this. Thanks in advance for any comments, Ole Ole Drews Jensen Systems Network Manager CCNP, MCSE, MCP+I RWR Enterprises, Inc. [EMAIL PROTECTED] http://www.RouterChief.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=55268t=55264 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Novell Server node address change [7:55264]
Thanks Dave, I have tried that without any luck. The command is reset router. Thanks, Ole Ole Drews Jensen Systems Network Manager CCNP, MCSE, MCP+I RWR Enterprises, Inc. [EMAIL PROTECTED] http://www.RouterChief.com Williams, Dave 10/10/2002 09:40 AM To: 'Ole D Jensen' , [EMAIL PROTECTED] cc: Subject:RE: Novell Server node address change [7:55264] You might try and clear the routing and network tables (I believe the command is clear routes although it's been a while) on the server. This will cause the server to resend SAPs to populate its tables. Sometimes the routing tables on a Novell Server (especially 4.10) gets messed up and won't dump the corrupted information. Dave Williams, CCDA, CCNA, CCSA Senior Network Engineer (402) 661-2143 -Original Message- From: Ole D Jensen [mailto:[EMAIL PROTECTED]] Sent: Thursday, October 10, 2002 8:40 AM To: [EMAIL PROTECTED] Subject: OT: Novell Server node address change [7:55264] This is a good step off the Cisco topic, but since it is in the network world, I'm sure at least one person on this list knows the answer. I have an old Novell NetWare 4.10 running, and sometimes it start changing the address of one specific workstation. I have looked over and over at the workstation to find a possible bug, but everything lookes fine, and reinstalling the Novell Client has not changed anything. Every 30 seconds, the Novell Server changes the node address back and forth: 10-10-028:20:00 am:Server-4.10-3191 Server WORKSTATION_27 Address has changed from 0040:123456789012:1234 to 0040:123456789012:3412 Information came from router at 123456789012 10-10-028:20:01 am:Server-4.10-3191 Server WORKSTATION_27 Address has changed from 0040:123456789012:3412 to 0040:123456789012:1234 Information came from router at 123456789012 To avoid misunderstandings, the WORKSTATION_27 is the workstation that it keeps changing the address on. I am not sure if it's the workstation itself that changes this address or the server, but it also says that the information came from router 123456789012 which is the workstation. I'm sure there's a logical explanation for this. Thanks in advance for any comments, Ole Ole Drews Jensen Systems Network Manager CCNP, MCSE, MCP+I RWR Enterprises, Inc. [EMAIL PROTECTED] http://www.RouterChief.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=55270t=55264 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Novell Server node address change [7:55264]
Ole, it's been a long time for me as well, but isn't that last set of numbers - the four after the : ( colon ) the SPX socket number? That is the thing that appears to be changing. Not that I would know what the change signifies. what's running on that workstation? -- ! Ole D Jensen wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... Thanks Dave, I have tried that without any luck. The command is reset router. Thanks, Ole Ole Drews Jensen Systems Network Manager CCNP, MCSE, MCP+I RWR Enterprises, Inc. [EMAIL PROTECTED] http://www.RouterChief.com Williams, Dave 10/10/2002 09:40 AM To: 'Ole D Jensen' , [EMAIL PROTECTED] cc: Subject: RE: Novell Server node address change [7:55264] You might try and clear the routing and network tables (I believe the command is clear routes although it's been a while) on the server. This will cause the server to resend SAPs to populate its tables. Sometimes the routing tables on a Novell Server (especially 4.10) gets messed up and won't dump the corrupted information. Dave Williams, CCDA, CCNA, CCSA Senior Network Engineer (402) 661-2143 -Original Message- From: Ole D Jensen [mailto:[EMAIL PROTECTED]] Sent: Thursday, October 10, 2002 8:40 AM To: [EMAIL PROTECTED] Subject: OT: Novell Server node address change [7:55264] This is a good step off the Cisco topic, but since it is in the network world, I'm sure at least one person on this list knows the answer. I have an old Novell NetWare 4.10 running, and sometimes it start changing the address of one specific workstation. I have looked over and over at the workstation to find a possible bug, but everything lookes fine, and reinstalling the Novell Client has not changed anything. Every 30 seconds, the Novell Server changes the node address back and forth: 10-10-028:20:00 am:Server-4.10-3191 Server WORKSTATION_27 Address has changed from 0040:123456789012:1234 to 0040:123456789012:3412 Information came from router at 123456789012 10-10-028:20:01 am:Server-4.10-3191 Server WORKSTATION_27 Address has changed from 0040:123456789012:3412 to 0040:123456789012:1234 Information came from router at 123456789012 To avoid misunderstandings, the WORKSTATION_27 is the workstation that it keeps changing the address on. I am not sure if it's the workstation itself that changes this address or the server, but it also says that the information came from router 123456789012 which is the workstation. I'm sure there's a logical explanation for this. Thanks in advance for any comments, Ole Ole Drews Jensen Systems Network Manager CCNP, MCSE, MCP+I RWR Enterprises, Inc. [EMAIL PROTECTED] http://www.RouterChief.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=55271t=55264 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Novell Server node address change [7:55264]
Yeah, I think you're right. I am not spending much time on the NW side of my network, so I can't remember all the facts by heart. The apps installed on that WorkStation are the same as installed on most other WorkStations on my networks. Ole Ole Drews Jensen Systems Network Manager CCNP, MCSE, MCP+I RWR Enterprises, Inc. [EMAIL PROTECTED] http://www.RouterChief.com The Long and Winding Road Sent by: [EMAIL PROTECTED] 10/10/2002 10:03 AM Please respond to The Long and Winding Road To: [EMAIL PROTECTED] cc: Subject:Re: Novell Server node address change [7:55264] Ole, it's been a long time for me as well, but isn't that last set of numbers - the four after the : ( colon ) the SPX socket number? That is the thing that appears to be changing. Not that I would know what the change signifies. what's running on that workstation? -- ! Ole D Jensen wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... Thanks Dave, I have tried that without any luck. The command is reset router. Thanks, Ole Ole Drews Jensen Systems Network Manager CCNP, MCSE, MCP+I RWR Enterprises, Inc. [EMAIL PROTECTED] http://www.RouterChief.com Williams, Dave 10/10/2002 09:40 AM To: 'Ole D Jensen' , [EMAIL PROTECTED] cc: Subject: RE: Novell Server node address change [7:55264] You might try and clear the routing and network tables (I believe the command is clear routes although it's been a while) on the server. This will cause the server to resend SAPs to populate its tables. Sometimes the routing tables on a Novell Server (especially 4.10) gets messed up and won't dump the corrupted information. Dave Williams, CCDA, CCNA, CCSA Senior Network Engineer (402) 661-2143 -Original Message- From: Ole D Jensen [mailto:[EMAIL PROTECTED]] Sent: Thursday, October 10, 2002 8:40 AM To: [EMAIL PROTECTED] Subject: OT: Novell Server node address change [7:55264] This is a good step off the Cisco topic, but since it is in the network world, I'm sure at least one person on this list knows the answer. I have an old Novell NetWare 4.10 running, and sometimes it start changing the address of one specific workstation. I have looked over and over at the workstation to find a possible bug, but everything lookes fine, and reinstalling the Novell Client has not changed anything. Every 30 seconds, the Novell Server changes the node address back and forth: 10-10-028:20:00 am:Server-4.10-3191 Server WORKSTATION_27 Address has changed from 0040:123456789012:1234 to 0040:123456789012:3412 Information came from router at 123456789012 10-10-028:20:01 am:Server-4.10-3191 Server WORKSTATION_27 Address has changed from 0040:123456789012:3412 to 0040:123456789012:1234 Information came from router at 123456789012 To avoid misunderstandings, the WORKSTATION_27 is the workstation that it keeps changing the address on. I am not sure if it's the workstation itself that changes this address or the server, but it also says that the information came from router 123456789012 which is the workstation. I'm sure there's a logical explanation for this. Thanks in advance for any comments, Ole Ole Drews Jensen Systems Network Manager CCNP, MCSE, MCP+I RWR Enterprises, Inc. [EMAIL PROTECTED] http://www.RouterChief.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=55282t=55264 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Novell Server node address change [7:55264]
The number after network.node is the IPX socket number, not an SPX socket number. Some protocols, such as IPX and DDP, have a socket number at the network layer. SPX was used by RCONSOLE. Some SNA gateways used it, though most used NetBIOS. I think some printing can use SPX. Ordinary client/server traffic uses NetWare Core Protocol (NCP), however, which resides directly above IPX and does not use SPX. NCP has its own build-in transport like behavior that is similar to the old IPX PEP and provides a semi-reliable delivery service for single packet exchanges (often called a ping/pong protocol). SPX behaves more like TCP but is way less important and not used by much. It would be normal for a client's socket number to change if new appliations were started or restarted. Could you watch this user and see what they do? I usually blame the users. ;-) Could they be playing a game perhaps? Were those numbers you told us made up to hide the details for security reasons? Can you tell us the actual numbers? You can probably get more detailed info at novell.com, but here's a few nuggets about IPX sockets: Socket numbers between 0x4000 and 0x7FFF are dynamic sockets; these are used by clients to communicate with servers. Socket numbers between 0x8000 and 0x are well-known sockets; these are assigned by Novell to specific processes. Software developers who write NetWare applications can ask Novell to reserve a socket number and get on the list of well-known sockets. Novell also reserves several sockets for use in the NetWare environment. Here's a partial list of socket numbers. Socket Process 0x0002 Cisco IPX ping 0x0451 NCP server 0x0452 SAP 0x0453 RIP 0x0455 Novell NetBIOS 0x0456 Diagnostics 0x85BE EIGRP 0x9001 NLSP 0x9004 IPXWAN 0x9086 Novell IPX ping ___ Priscilla Oppenheimer www.troubleshootingnetworks.com www.priscilla.com Ole D Jensen wrote: Yeah, I think you're right. I am not spending much time on the NW side of my network, so I can't remember all the facts by heart. The apps installed on that WorkStation are the same as installed on most other WorkStations on my networks. Ole Ole Drews Jensen Systems Network Manager CCNP, MCSE, MCP+I RWR Enterprises, Inc. [EMAIL PROTECTED] http://www.RouterChief.com The Long and Winding Road Sent by: [EMAIL PROTECTED] 10/10/2002 10:03 AM Please respond to The Long and Winding Road To: [EMAIL PROTECTED] cc: Subject:Re: Novell Server node address change [7:55264] Ole, it's been a long time for me as well, but isn't that last set of numbers - the four after the : ( colon ) the SPX socket number? That is the thing that appears to be changing. Not that I would know what the change signifies. what's running on that workstation? -- ! Ole D Jensen wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... Thanks Dave, I have tried that without any luck. The command is reset router. Thanks, Ole Ole Drews Jensen Systems Network Manager CCNP, MCSE, MCP+I RWR Enterprises, Inc. [EMAIL PROTECTED] http://www.RouterChief.com Williams, Dave 10/10/2002 09:40 AM To: 'Ole D Jensen' , [EMAIL PROTECTED] cc: Subject: RE: Novell Server node address change [7:55264] You might try and clear the routing and network tables (I believe the command is clear routes although it's been a while) on the server. This will cause the server to resend SAPs to populate its tables. Sometimes the routing tables on a Novell Server (especially 4.10) gets messed up and won't dump the corrupted information. Dave Williams, CCDA, CCNA, CCSA Senior Network Engineer (402) 661-2143 -Original Message- From: Ole D Jensen [mailto:[EMAIL PROTECTED]] Sent: Thursday, October 10, 2002 8:40 AM To: [EMAIL PROTECTED] Subject: OT: Novell Server node address change [7:55264] This is a good step off the Cisco topic, but since it is in the network world, I'm sure at least one person on this list knows the answer. I have an old Novell NetWare 4.10 running, and sometimes it start changing the address of one specific workstation. I have looked over and over at the workstation to find a possible bug, but everything lookes fine, and reinstalling the Novell Client has not changed anything. Every 30 seconds, the Novell Server changes the node address back and forth: 10-10-028:20:00 am:Server-4.10-3191 Server WORKSTATION_27 Address has changed from 0040:123456789012:1234 to 0040:123456789012:3412 Information came from router at 123456789012 10-10-028:
Re: Novell Server node address change [7:55264]
Thanks Priscilla for a very good explanation. The numbers were just made up, but it keeps changing from 85E8 to E885 and back to 85E8 a second later. As far as I have found out so far, 85E8 is Microsoft Endpoint Mapper for RPC, however the workstation is a Windows 98. I will take a closer look at the workstation, but if anyone have a good tip, please let me know. Thanks, Ole Ole Drews Jensen Systems Network Manager CCNP, MCSE, MCP+I RWR Enterprises, Inc. [EMAIL PROTECTED] http://www.RouterChief.com Priscilla Oppenheimer Sent by: [EMAIL PROTECTED] 10/10/2002 11:46 AM Please respond to Priscilla Oppenheimer To: [EMAIL PROTECTED] cc: Subject:Re: Novell Server node address change [7:55264] The number after network.node is the IPX socket number, not an SPX socket number. Some protocols, such as IPX and DDP, have a socket number at the network layer. SPX was used by RCONSOLE. Some SNA gateways used it, though most used NetBIOS. I think some printing can use SPX. Ordinary client/server traffic uses NetWare Core Protocol (NCP), however, which resides directly above IPX and does not use SPX. NCP has its own build-in transport like behavior that is similar to the old IPX PEP and provides a semi-reliable delivery service for single packet exchanges (often called a ping/pong protocol). SPX behaves more like TCP but is way less important and not used by much. It would be normal for a client's socket number to change if new appliations were started or restarted. Could you watch this user and see what they do? I usually blame the users. ;-) Could they be playing a game perhaps? Were those numbers you told us made up to hide the details for security reasons? Can you tell us the actual numbers? You can probably get more detailed info at novell.com, but here's a few nuggets about IPX sockets: Socket numbers between 0x4000 and 0x7FFF are dynamic sockets; these are used by clients to communicate with servers. Socket numbers between 0x8000 and 0x are well-known sockets; these are assigned by Novell to specific processes. Software developers who write NetWare applications can ask Novell to reserve a socket number and get on the list of well-known sockets. Novell also reserves several sockets for use in the NetWare environment. Here's a partial list of socket numbers. Socket Process 0x0002 Cisco IPX ping 0x0451 NCP server 0x0452 SAP 0x0453 RIP 0x0455 Novell NetBIOS 0x0456 Diagnostics 0x85BE EIGRP 0x9001 NLSP 0x9004 IPXWAN 0x9086 Novell IPX ping ___ Priscilla Oppenheimer www.troubleshootingnetworks.com www.priscilla.com Ole D Jensen wrote: Yeah, I think you're right. I am not spending much time on the NW side of my network, so I can't remember all the facts by heart. The apps installed on that WorkStation are the same as installed on most other WorkStations on my networks. Ole Ole Drews Jensen Systems Network Manager CCNP, MCSE, MCP+I RWR Enterprises, Inc. [EMAIL PROTECTED] http://www.RouterChief.com The Long and Winding Road Sent by: [EMAIL PROTECTED] 10/10/2002 10:03 AM Please respond to The Long and Winding Road To: [EMAIL PROTECTED] cc: Subject:Re: Novell Server node address change [7:55264] Ole, it's been a long time for me as well, but isn't that last set of numbers - the four after the : ( colon ) the SPX socket number? That is the thing that appears to be changing. Not that I would know what the change signifies. what's running on that workstation? -- ! Ole D Jensen wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... Thanks Dave, I have tried that without any luck. The command is reset router. Thanks, Ole Ole Drews Jensen Systems Network Manager CCNP, MCSE, MCP+I RWR Enterprises, Inc. [EMAIL PROTECTED] http://www.RouterChief.com Williams, Dave 10/10/2002 09:40 AM To: 'Ole D Jensen' , [EMAIL PROTECTED] cc: Subject: RE: Novell Server node address change [7:55264] You might try and clear the routing and network tables (I believe the command is clear routes although it's been a while) on the server. This will cause the server to resend SAPs to populate its tables. Sometimes the routing tables on a Novell Server (especially 4.10) gets messed up and won't dump the corrupted information. Dave Williams, CCDA, CCNA, CCSA Senior Network Engineer (402) 661-2143 -
Re: Novell Server node address change [7:55264]
This may not be relevant since it's just the socket that changes, but you don't have another workstation with a duplicate address, do you? I have seen similar symptoms from that. JMcL Ole D Jensen wrote: Thanks Priscilla for a very good explanation. The numbers were just made up, but it keeps changing from 85E8 to E885 and back to 85E8 a second later. As far as I have found out so far, 85E8 is Microsoft Endpoint Mapper for RPC, however the workstation is a Windows 98. I will take a closer look at the workstation, but if anyone have a good tip, please let me know. Thanks, Ole Ole Drews Jensen Systems Network Manager CCNP, MCSE, MCP+I RWR Enterprises, Inc. [EMAIL PROTECTED] http://www.RouterChief.com Priscilla Oppenheimer Sent by: [EMAIL PROTECTED] 10/10/2002 11:46 AM Please respond to Priscilla Oppenheimer To: [EMAIL PROTECTED] cc: Subject:Re: Novell Server node address change [7:55264] The number after network.node is the IPX socket number, not an SPX socket number. Some protocols, such as IPX and DDP, have a socket number at the network layer. SPX was used by RCONSOLE. Some SNA gateways used it, though most used NetBIOS. I think some printing can use SPX. Ordinary client/server traffic uses NetWare Core Protocol (NCP), however, which resides directly above IPX and does not use SPX. NCP has its own build-in transport like behavior that is similar to the old IPX PEP and provides a semi-reliable delivery service for single packet exchanges (often called a ping/pong protocol). SPX behaves more like TCP but is way less important and not used by much. It would be normal for a client's socket number to change if new appliations were started or restarted. Could you watch this user and see what they do? I usually blame the users. ;-) Could they be playing a game perhaps? Were those numbers you told us made up to hide the details for security reasons? Can you tell us the actual numbers? You can probably get more detailed info at novell.com, but here's a few nuggets about IPX sockets: Socket numbers between 0x4000 and 0x7FFF are dynamic sockets; these are used by clients to communicate with servers. Socket numbers between 0x8000 and 0x are well-known sockets; these are assigned by Novell to specific processes. Software developers who write NetWare applications can ask Novell to reserve a socket number and get on the list of well-known sockets. Novell also reserves several sockets for use in the NetWare environment. Here's a partial list of socket numbers. Socket Process 0x0002 Cisco IPX ping 0x0451 NCP server 0x0452 SAP 0x0453 RIP 0x0455 Novell NetBIOS 0x0456 Diagnostics 0x85BE EIGRP 0x9001 NLSP 0x9004 IPXWAN 0x9086 Novell IPX ping ___ Priscilla Oppenheimer www.troubleshootingnetworks.com www.priscilla.com Ole D Jensen wrote: Yeah, I think you're right. I am not spending much time on the NW side of my network, so I can't remember all the facts by heart. The apps installed on that WorkStation are the same as installed on most other WorkStations on my networks. Ole Ole Drews Jensen Systems Network Manager CCNP, MCSE, MCP+I RWR Enterprises, Inc. [EMAIL PROTECTED] http://www.RouterChief.com The Long and Winding Road Sent by: [EMAIL PROTECTED] 10/10/2002 10:03 AM Please respond to The Long and Winding Road To: [EMAIL PROTECTED] cc: Subject:Re: Novell Server node address change [7:55264] Ole, it's been a long time for me as well, but isn't that last set of numbers - the four after the : ( colon ) the SPX socket number? That is the thing that appears to be changing. Not that I would know what the change signifies. what's running on that workstation? -- ! Ole D Jensen wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... Thanks Dave, I have tried that without any luck. The command is reset router. Thanks, Ole Ole Drews Jensen Systems Network Manager CCNP, MCSE, MCP+I RWR Enterprises, Inc. [EMAIL PROTECTED] http://www.RouterChief.com Williams, Dave 10/10/2002 09:40 AM To: 'Ole D Jensen' , [EMAIL PROTECTED] cc: Subject: RE: Novell Server node address change [7:55264] You m