RE: mac and IP addresses on a 1900 [7:70514]
And for the 1900 menu-based series look for something called an Address Report, or something to that effect. It will display the addresses learned on each interface. John >>> Brian 6/11/03 12:55:10 PM >>> Show cam? Brian The path to a desireable destination is often more difficult than the path to stay where you are. On Wed, 11 Jun 2003, Richard Kerschner wrote: > I asked the same question of Cisco on a Catalyst 5500. They did not > have a command to perform the function. I assume they do not have a > command on the 1900 either. > > Thanks > > Rich Kerschner, CCNA > Sr. Systems Administrator > Genesis Financial Solutions, Inc. > [EMAIL PROTECTED] > (254) 953-2331 Desk > (254) 953-2306 Fax > (254) 702-2356 Cell > > > -Original Message- > From: Ants [mailto:[EMAIL PROTECTED] > Sent: Wednesday, June 11, 2003 9:32 AM > To: [EMAIL PROTECTED] > Subject: mac and IP addresses on a 1900 [7:70514] > > Hi, > anyone knows how i can tel what mac or ip address connects onto a port > on a > cisco 1900 switch? > there's no command line interface only menus > > thanks in advance. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=70531&t=70514 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: mac and IP addresses on a 1900 [7:70514]
Richard Kerschner wrote: > I asked the same question of Cisco on a Catalyst 5500. They did not > have a command to perform the function. I assume they do not have a > command on the 1900 either. > > Thanks > > Rich Kerschner, CCNA > Sr. Systems Administrator > Genesis Financial Solutions, Inc. > [EMAIL PROTECTED] > (254) 953-2331 Desk > (254) 953-2306 Fax > (254) 702-2356 Cell Who told you you couldn't see an individual MAC on a 5500?? C5000B (enable) sh cam dyn 2/1 * = Static Entry. + = Permanent Entry. # = System Entry. R = Router Entry. X = P ort Security Entry VLAN Dest MAC/Route Des Destination Ports or VCs / [Protocol Type] -- 400 00-50-73-41-ef-89 2/1 [ALL] Total Matching CAM Entries Displayed = 1 Dave > > > -Original Message- > From: Ants [mailto:[EMAIL PROTECTED] > Sent: Wednesday, June 11, 2003 9:32 AM > To: [EMAIL PROTECTED] > Subject: mac and IP addresses on a 1900 [7:70514] > > Hi, > anyone knows how i can tel what mac or ip address connects onto a port > on a > cisco 1900 switch? > there's no command line interface only menus > > thanks in advance. -- David Madland CCIE# 2016 Sr. Network Engineer Qwest Communications 612-664-3367 "Government can do something for the people only in proportion as it can do something to the people." -- Thomas Jefferson Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=70528&t=70514 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: mac and IP addresses on a 1900 [7:70514]
[EMAIL PROTECTED] wrote: > I asked the same question of Cisco on a Catalyst 5500. They did not > have a command to perform the function. I assume they do not have a > command on the 1900 either. > Why doesn't show cam dynamic work on the 5500 to find the mac address. Then show ip arp on the router. You can use User Tracking in CiscoWorks as well. A switch is a layer 2 device, why should it care about the layer 3 information. On the 1900 menu - A, , L Or from the command line - sh mac-address-table David -- David C Prall [EMAIL PROTECTED] http://dcp.dcptech.com > > -Original Message- > From: Ants [mailto:[EMAIL PROTECTED] > > Hi, > anyone knows how i can tel what mac or ip address connects onto a > port on a cisco 1900 switch? > there's no command line interface only menus > > thanks in advance. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=70525&t=70514 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: mac and IP addresses on a 1900 [7:70514]
Show cam? Brian The path to a desireable destination is often more difficult than the path to stay where you are. On Wed, 11 Jun 2003, Richard Kerschner wrote: > I asked the same question of Cisco on a Catalyst 5500. They did not > have a command to perform the function. I assume they do not have a > command on the 1900 either. > > Thanks > > Rich Kerschner, CCNA > Sr. Systems Administrator > Genesis Financial Solutions, Inc. > [EMAIL PROTECTED] > (254) 953-2331 Desk > (254) 953-2306 Fax > (254) 702-2356 Cell > > > -Original Message- > From: Ants [mailto:[EMAIL PROTECTED] > Sent: Wednesday, June 11, 2003 9:32 AM > To: [EMAIL PROTECTED] > Subject: mac and IP addresses on a 1900 [7:70514] > > Hi, > anyone knows how i can tel what mac or ip address connects onto a port > on a > cisco 1900 switch? > there's no command line interface only menus > > thanks in advance. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=70527&t=70514 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: mac and IP addresses on a 1900 [7:70514]
try show mac-address-table Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=70522&t=70514 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: mac and IP addresses on a 1900 [7:70514]
I asked the same question of Cisco on a Catalyst 5500. They did not have a command to perform the function. I assume they do not have a command on the 1900 either. Thanks Rich Kerschner, CCNA Sr. Systems Administrator Genesis Financial Solutions, Inc. [EMAIL PROTECTED] (254) 953-2331 Desk (254) 953-2306 Fax (254) 702-2356 Cell -Original Message- From: Ants [mailto:[EMAIL PROTECTED] Sent: Wednesday, June 11, 2003 9:32 AM To: [EMAIL PROTECTED] Subject: mac and IP addresses on a 1900 [7:70514] Hi, anyone knows how i can tel what mac or ip address connects onto a port on a cisco 1900 switch? there's no command line interface only menus thanks in advance. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=70519&t=70514 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
