Re: Cisco 2500 console problem [7:40559]
Be sure the setting of your computer is correct, say my setting for com 1 is 8, N, 1, flow control: XOn/Xoff , the baud rate should be 9600. I don't think that the console port is so easy to be faulty. I think the problem is mainly due to your setting. siubond Widjaja Surja Kentjana Hi all, Have just got a Cisco 2503. I am not able to console, I believe it is faulty. I need to clear the password. Tried to use AUX, but AUX is only available when the IOS is loaded. Any other way out or workaround it? Thanks. Widjaja Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=40740t=40559 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Cisco 2500 console problem [7:40559]
For some reason some old 2503s seem to have this problem. I have run into it myself. Make sure you have your terminal settings set correctly (check the baud rate, stop bits, and flow control). If that doesn't work, try using a different computer (I seem to have the best luck using an NT machine). thanks, -Brad Ellis CCIE#5796 (RS / Security) Network Learning Inc [EMAIL PROTECTED] www.optsys.net (Cisco hardware) Widjaja Surja Kentjana wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... Hi all, Have just got a Cisco 2503. I am not able to console, I believe it is faulty. I need to clear the password. Tried to use AUX, but AUX is only available when the IOS is loaded. Any other way out or workaround it? Thanks. Widjaja Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=40562t=40559 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Cisco 2500 console problem [7:40559]
After seeing this thread I remembered having two 2500's in the lab I couldn't talk to but could see data from it. I went back and diabled flowcontrol, teraterm, and it worked fine!! Dave CiscoB wrote: For some reason some old 2503s seem to have this problem. I have run into it myself. Make sure you have your terminal settings set correctly (check the baud rate, stop bits, and flow control). If that doesn't work, try using a different computer (I seem to have the best luck using an NT machine). thanks, -Brad Ellis CCIE#5796 (RS / Security) Network Learning Inc [EMAIL PROTECTED] www.optsys.net (Cisco hardware) Widjaja Surja Kentjana wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... Hi all, Have just got a Cisco 2503. I am not able to console, I believe it is faulty. I need to clear the password. Tried to use AUX, but AUX is only available when the IOS is loaded. Any other way out or workaround it? Thanks. Widjaja -- David Madland Sr. Network Engineer CCIE# 2016 Qwest Communications Int. Inc. [EMAIL PROTECTED] 612-664-3367 Emotion should reflect reason not guide it Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=40600t=40559 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]