Re: Debug not working via telnet [7:9019]
If you have two telnet sessions, the output of the debug will be display to the first telnet session...Christophe From: Robert Hosford Reply-To: Robert Hosford To: [EMAIL PROTECTED] Subject: Re: Debug not working via telnet [7:9019] Date: Tue, 26 Jun 2001 14:19:24 -0400 Logging syncronous will affect it as well. - Original Message - From: G30RG3 To: Sent: Wednesday, June 20, 2001 3:59 PM Subject: Re: Debug not working via telnet [7:9019] Make sure you input the command terminal monitor so it will display the output to the VTY session you are logged in on. otherwise it will only show it to the console session. Good Luck George, Head Janitor, CCNA CCDA Cisco Systems cisco guru wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... Hi all, I am trying to see the debug output on my routers via telnet sessions but am not having any luck. I first got the debug ip packet command to work but then it stopped working. No other debug commands will work. Eg. debug ip igrp trans I have the service timestamps commands issued along with the term mon command on the router running the telnet session. The ios ver. on this particular router is 11.0 (10c). Does the ios ver. make a difference or does something in particular have to be done on both routers? Please advise. Thank you. _ Get your FREE download of MSN Explorer at http://explorer.msn.com _ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=10099t=9019 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Debug not working via telnet [7:9019]
Logging syncronous will affect it as well. - Original Message - From: G30RG3 To: Sent: Wednesday, June 20, 2001 3:59 PM Subject: Re: Debug not working via telnet [7:9019] Make sure you input the command terminal monitor so it will display the output to the VTY session you are logged in on. otherwise it will only show it to the console session. Good Luck George, Head Janitor, CCNA CCDA Cisco Systems cisco guru wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... Hi all, I am trying to see the debug output on my routers via telnet sessions but am not having any luck. I first got the debug ip packet command to work but then it stopped working. No other debug commands will work. Eg. debug ip igrp trans I have the service timestamps commands issued along with the term mon command on the router running the telnet session. The ios ver. on this particular router is 11.0 (10c). Does the ios ver. make a difference or does something in particular have to be done on both routers? Please advise. Thank you. _ Get your FREE download of MSN Explorer at http://explorer.msn.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=9986t=9019 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Debug not working via telnet [7:9019]
Maybe you can try issue a terminal monitor command in your telnet session!! Todd -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Allen May Sent: Wednesday, June 20, 2001 3:31 AM To: [EMAIL PROTECTED] Subject: Re: Debug not working via telnet [7:9019] I seem to recall ( experienced) a situation where certain debugs do not work via telnet are only visible on the console or by dumping to a syslog viewing there. - Original Message - From: Reinhold Fischer To: Sent: Tuesday, June 19, 2001 11:48 AM Subject: Re: Debug not working via telnet [7:9019] Hi, the problem could be that only process-switched packets get 'seen' by the debug process. issue 'no ip route-cache' at the interface config. please report if this solved the problem ... Greetings Reinhold On Tue, 19 Jun 2001, cisco guru wrote: Hi all, I am trying to see the debug output on my routers via telnet sessions but am not having any luck. I first got the debug ip packet command to work but then it stopped working. No other debug commands will work. Eg. debug ip igrp trans I have the service timestamps commands issued along with the term mon command on the router running the telnet session. The ios ver. on this particular router is 11.0 (10c). Does the ios ver. make a difference or does something in particular have to be done on both routers? Please advise. Thank you. Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=9157t=9019 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Debug not working via telnet [7:9019]
Ahhh...think I may have found the reason. (by the way...I was referring to Cisco PIX debugs..sorry for the confusion). There was something I saw for IPSec tunnels for the debugs on the handshake between a router a PIX. I could be mistaken, but I read it somewhere I'm sure. Maybe term mon will fix it...I'd have to recreate the problem first to find out. Before using the debug command, use the who command to see if there are any Telnet sessions to the console. If the debug command finds a Telnet session, it automatically sends the debug output to the Telnet session instead of the console. This will cause the serial console session to seem as though no output is appearing when it is really going to the Telnet session. If you have two or more Telnet console sessions, the first session is the Trace Channel. If that session closes, the serial console session becomes the Trace Channel. The next Telnet console session that accesses the console then becomes the Trace Channel. - Original Message - From: Shahzad To: Sent: Tuesday, June 19, 2001 4:03 PM Subject: Re: Debug not working via telnet [7:9019] I have yet to experience any debug whose output i cant see on my telnet. are u sure you are using 'term mon' after turning on debug ? Allen May wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... I seem to recall ( experienced) a situation where certain debugs do not work via telnet are only visible on the console or by dumping to a syslog viewing there. - Original Message - From: Reinhold Fischer To: Sent: Tuesday, June 19, 2001 11:48 AM Subject: Re: Debug not working via telnet [7:9019] Hi, the problem could be that only process-switched packets get 'seen' by the debug process. issue 'no ip route-cache' at the interface config. please report if this solved the problem ... Greetings Reinhold On Tue, 19 Jun 2001, cisco guru wrote: Hi all, I am trying to see the debug output on my routers via telnet sessions but am not having any luck. I first got the debug ip packet command to work but then it stopped working. No other debug commands will work. Eg. debug ip igrp trans I have the service timestamps commands issued along with the term mon command on the router running the telnet session. The ios ver. on this particular router is 11.0 (10c). Does the ios ver. make a difference or does something in particular have to be done on both routers? Please advise. Thank you. Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=9179t=9019 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Debug not working via telnet [7:9019]
Make sure you input the command terminal monitor so it will display the output to the VTY session you are logged in on. otherwise it will only show it to the console session. Good Luck George, Head Janitor, CCNA CCDA Cisco Systems cisco guru wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... Hi all, I am trying to see the debug output on my routers via telnet sessions but am not having any luck. I first got the debug ip packet command to work but then it stopped working. No other debug commands will work. Eg. debug ip igrp trans I have the service timestamps commands issued along with the term mon command on the router running the telnet session. The ios ver. on this particular router is 11.0 (10c). Does the ios ver. make a difference or does something in particular have to be done on both routers? Please advise. Thank you. _ Get your FREE download of MSN Explorer at http://explorer.msn.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=9245t=9019 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Debug not working via telnet [7:9019]
To view the ouput of a debug command via a telnet session you must issue the following command: terminal monitor Mike W. cisco guru wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... Hi all, I am trying to see the debug output on my routers via telnet sessions but am not having any luck. I first got the debug ip packet command to work but then it stopped working. No other debug commands will work. Eg. debug ip igrp trans I have the service timestamps commands issued along with the term mon command on the router running the telnet session. The ios ver. on this particular router is 11.0 (10c). Does the ios ver. make a difference or does something in particular have to be done on both routers? Please advise. Thank you. _ Get your FREE download of MSN Explorer at http://explorer.msn.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=9264t=9019 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Debug not working via telnet [7:9019]
I seem to recall ( experienced) a situation where certain debugs do not work via telnet are only visible on the console or by dumping to a syslog viewing there. - Original Message - From: Reinhold Fischer To: Sent: Tuesday, June 19, 2001 11:48 AM Subject: Re: Debug not working via telnet [7:9019] Hi, the problem could be that only process-switched packets get 'seen' by the debug process. issue 'no ip route-cache' at the interface config. please report if this solved the problem ... Greetings Reinhold On Tue, 19 Jun 2001, cisco guru wrote: Hi all, I am trying to see the debug output on my routers via telnet sessions but am not having any luck. I first got the debug ip packet command to work but then it stopped working. No other debug commands will work. Eg. debug ip igrp trans I have the service timestamps commands issued along with the term mon command on the router running the telnet session. The ios ver. on this particular router is 11.0 (10c). Does the ios ver. make a difference or does something in particular have to be done on both routers? Please advise. Thank you. Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=9097t=9019 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Debug not working via telnet [7:9019]
Type Show log and see if you see your output there. If not, then try logging monitor debug Good Luck, Let me know if it works, Ejay -Original Message- From: cisco guru [mailto:[EMAIL PROTECTED]] Sent: Tuesday, June 19, 2001 1:09 AM To: [EMAIL PROTECTED] Subject: Debug not working via telnet [7:9019] Hi all, I am trying to see the debug output on my routers via telnet sessions but am not having any luck. I first got the debug ip packet command to work but then it stopped working. No other debug commands will work. Eg. debug ip igrp trans I have the service timestamps commands issued along with the term mon command on the router running the telnet session. The ios ver. on this particular router is 11.0 (10c). Does the ios ver. make a difference or does something in particular have to be done on both routers? Please advise. Thank you. _ Get your FREE download of MSN Explorer at http://explorer.msn.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=9055t=9019 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Debug not working via telnet [7:9019]
Hi, the problem could be that only process-switched packets get 'seen' by the debug process. issue 'no ip route-cache' at the interface config. please report if this solved the problem ... Greetings Reinhold On Tue, 19 Jun 2001, cisco guru wrote: Hi all, I am trying to see the debug output on my routers via telnet sessions but am not having any luck. I first got the debug ip packet command to work but then it stopped working. No other debug commands will work. Eg. debug ip igrp trans I have the service timestamps commands issued along with the term mon command on the router running the telnet session. The ios ver. on this particular router is 11.0 (10c). Does the ios ver. make a difference or does something in particular have to be done on both routers? Please advise. Thank you. Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=9087t=9019 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Debug not working via telnet [7:9019]
I have yet to experience any debug whose output i cant see on my telnet. are u sure you are using 'term mon' after turning on debug ? Allen May wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... I seem to recall ( experienced) a situation where certain debugs do not work via telnet are only visible on the console or by dumping to a syslog viewing there. - Original Message - From: Reinhold Fischer To: Sent: Tuesday, June 19, 2001 11:48 AM Subject: Re: Debug not working via telnet [7:9019] Hi, the problem could be that only process-switched packets get 'seen' by the debug process. issue 'no ip route-cache' at the interface config. please report if this solved the problem ... Greetings Reinhold On Tue, 19 Jun 2001, cisco guru wrote: Hi all, I am trying to see the debug output on my routers via telnet sessions but am not having any luck. I first got the debug ip packet command to work but then it stopped working. No other debug commands will work. Eg. debug ip igrp trans I have the service timestamps commands issued along with the term mon command on the router running the telnet session. The ios ver. on this particular router is 11.0 (10c). Does the ios ver. make a difference or does something in particular have to be done on both routers? Please advise. Thank you. Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=9107t=9019 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
