SPAN question for 6000 IDSM [7:33757]
Hi, How do I go about SPANning multiple vlans to a port. I have a 6000 IDSM blade in slot 9 and the monitoring port is 1. However, I can only span one vlan (one ingress session for both directions) at any one time. "set span "vlan#" 9/1" Running this command again for another vlan will only make the previous vlan inactive for SPANning. My goal is to SPAN several (15) vlans or ALL the vlans. Any suggestions? thanks, Telemachus Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=33757&t=33757 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: SPAN question for 6000 IDSM [7:33757]
Good Day Telemachus, I don't think you can span multiple vlans to the same port. A VLAN is a broadcast domain. regards amanda Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=33774&t=33757 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: SPAN question for 6000 IDSM [7:33757]
You can SPAN multiple VLANs on 4000/5000/6000 switches. Dave amanda lalli-cafini wrote: > > Good Day Telemachus, > > I don't think you can span multiple vlans to the same port. > A VLAN is a broadcast domain. > > regards > > amanda -- David Madland Sr. Network Engineer CCIE# 2016 Qwest Communications Int. Inc. [EMAIL PROTECTED] 612-664-3367 "Emotion should reflect reason not guide it" Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=33778&t=33757 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: SPAN question for 6000 IDSM [7:33757]
You could always span a trunk. Jeff ""Telemachus Luu"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Hi, > > How do I go about SPANning multiple vlans to a port. I have a 6000 IDSM > blade in slot 9 and the monitoring port is 1. However, I can only span one > vlan (one ingress session for both directions) at any one time. > > "set span "vlan#" 9/1" > > Running this command again for another vlan will only make the previous vlan > inactive for SPANning. > My goal is to SPAN several (15) vlans or ALL the vlans. Any suggestions? > > thanks, > Telemachus Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=33779&t=33757 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]