RE: Slimline 2 [7:27365]
Hi, is this Slimline 2 ISDN simulator a software ? If it is, can you send one copy to me ? [EMAIL PROTECTED] Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=27657t=27365 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Slimline 2 [7:27365]
I am using the Slimline 2 ISDN simulator from PDS technologies. I cannot get the SPID to be accepted. (See below) ISDN BRI0 interface dsl 0, interface ISDN Switchtype = basic-5ess Layer 1 Status: ACTIVE Layer 2 Status: TEI = 64, Ces = 1, SAPI = 0, State = MULTIPLE_FRAME_ESTABLISHE TEI 64, ces = 1, state = 4(await init) spid1 configured, no LDN, spid1 sent, spid1 NOT valid I have not modifed the default phone numbers and configured on Slimline Below are my configs for bri0 interface BRI0 ip address 10.0.0.1 255.255.255.0 encapsulation ppp no ip route-cache no ip mroute-cache dialer map ip 10.0.0.2 dialer-group 1 isdn switch-type basic-5ess isdn spid1 Is there a default LDN number I have to configure? Pierre-Alex Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=27365t=27365 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Slimline 2 [7:27365]
What version of the IOS are you running? Some of the 12.0 versions have a cosmetic bug which shows an invalid SPID when actually, all is well. -Original Message- From: Pierre-Alex J. Guanel [mailto:[EMAIL PROTECTED]] Sent: Monday, November 26, 2001 1:02 PM To: [EMAIL PROTECTED] Subject: Slimline 2 [7:27365] I am using the Slimline 2 ISDN simulator from PDS technologies. I cannot get the SPID to be accepted. (See below) ISDN BRI0 interface dsl 0, interface ISDN Switchtype = basic-5ess Layer 1 Status: ACTIVE Layer 2 Status: TEI = 64, Ces = 1, SAPI = 0, State = MULTIPLE_FRAME_ESTABLISHE TEI 64, ces = 1, state = 4(await init) spid1 configured, no LDN, spid1 sent, spid1 NOT valid I have not modifed the default phone numbers and configured on Slimline Below are my configs for bri0 interface BRI0 ip address 10.0.0.1 255.255.255.0 encapsulation ppp no ip route-cache no ip mroute-cache dialer map ip 10.0.0.2 dialer-group 1 isdn switch-type basic-5ess isdn spid1 Is there a default LDN number I have to configure? Pierre-Alex Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=27366t=27365 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Slimline 2 [7:27365]
THANKS! -Original Message- From: Duncan Personal Sent: Mon 11/26/2001 2:55 AM To: Pierre-Alex J. Guanel Cc: Subject: RE: Slimline 2 [7:27365] Hi Pierre-Alex, The PDS SDN simulator conforms to the European Telecommunications Standards Institute. I believe you need to configure basic-net3 as your switch-type. Regards Duncan -Original Message- From: [EMAIL PROTECTED] [ mailto:[EMAIL PROTECTED]]On Behalf Of Pierre-Alex J. Guanel Sent: 26 November 2001 21:02 To: [EMAIL PROTECTED] Subject: Slimline 2 [7:27365] I am using the Slimline 2 ISDN simulator from PDS technologies. I cannot get the SPID to be accepted. (See below) ISDN BRI0 interface dsl 0, interface ISDN Switchtype = basic-5ess Layer 1 Status: ACTIVE Layer 2 Status: TEI = 64, Ces = 1, SAPI = 0, State = MULTIPLE_FRAME_ESTABLISHE TEI 64, ces = 1, state = 4(await init) spid1 configured, no LDN, spid1 sent, spid1 NOT valid I have not modifed the default phone numbers and configured on Slimline Below are my configs for bri0 interface BRI0 ip address 10.0.0.1 255.255.255.0 encapsulation ppp no ip route-cache no ip mroute-cache dialer map ip 10.0.0.2 dialer-group 1 isdn switch-type basic-5ess isdn spid1 Is there a default LDN number I have to configure? Pierre-Alex [EMAIL PROTECTED] Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=27374t=27365 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Slimline 2 [7:27365]
Pierre, Hi! You have the wrong switch type configured for the Simline2. You want: ISDN switch-type basic-net3 Also, this switch type does NOT use spids! FYI thanks, -Brad Ellis CCIE#5796 (RS / Security) Network Learning Inc [EMAIL PROTECTED] used Cisco gear: www.optsys.net CCIE Labs, racks, and classes: http://www.ccbootcamp.com/quicklinks.html Pierre-Alex J. Guanel wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... I am using the Slimline 2 ISDN simulator from PDS technologies. I cannot get the SPID to be accepted. (See below) ISDN BRI0 interface dsl 0, interface ISDN Switchtype = basic-5ess Layer 1 Status: ACTIVE Layer 2 Status: TEI = 64, Ces = 1, SAPI = 0, State = MULTIPLE_FRAME_ESTABLISHE TEI 64, ces = 1, state = 4(await init) spid1 configured, no LDN, spid1 sent, spid1 NOT valid I have not modifed the default phone numbers and configured on Slimline Below are my configs for bri0 interface BRI0 ip address 10.0.0.1 255.255.255.0 encapsulation ppp no ip route-cache no ip mroute-cache dialer map ip 10.0.0.2 dialer-group 1 isdn switch-type basic-5ess isdn spid1 Is there a default LDN number I have to configure? Pierre-Alex Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=27369t=27365 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Slimline 2 [7:27365]
THANKS! -Original Message- From: Brad Ellis Sent: Mon 11/26/2001 2:18 PM To: Pierre-Alex J. Guanel Cc: Subject: Re: Slimline 2 [7:27365] Pierre, Hi! You have the wrong switch type configured for the Simline2. You want: ISDN switch-type basic-net3 Also, this switch type does NOT use spids! FYI thanks, -Brad Ellis CCIE#5796 (RS / Security) Network Learning Inc [EMAIL PROTECTED] used Cisco gear: www.optsys.net CCIE Labs, racks, and classes: http://www.ccbootcamp.com/quicklinks.html Pierre-Alex J. Guanel wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... I am using the Slimline 2 ISDN simulator from PDS technologies. I cannot get the SPID to be accepted. (See below) ISDN BRI0 interface dsl 0, interface ISDN Switchtype = basic-5ess Layer 1 Status: ACTIVE Layer 2 Status: TEI = 64, Ces = 1, SAPI = 0, State = MULTIPLE_FRAME_ESTABLISHE TEI 64, ces = 1, state = 4(await init) spid1 configured, no LDN, spid1 sent, spid1 NOT valid I have not modifed the default phone numbers and configured on Slimline Below are my configs for bri0 interface BRI0 ip address 10.0.0.1 255.255.255.0 encapsulation ppp no ip route-cache no ip mroute-cache dialer map ip 10.0.0.2 dialer-group 1 isdn switch-type basic-5ess isdn spid1 Is there a default LDN number I have to configure? Pierre-Alex [EMAIL PROTECTED] Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=27371t=27365 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]