RE: Supervisor III [7:40659]
Eddie- I actually decoded the RAM #'s and ordered non-Cisco. I found a reseller on Ebay who treated me very well [EMAIL PROTECTED] I think I paid something like $36 for the (2) 32 Meg matched sticks. Remember to shop for the RAM by specs: 32bit, 72pin EDO SIMM, 2k, 60ns Also- for the FLASH, 8 Megs of 2500 series will do. A PCMCIA card can be installed into you Slot:0 or Slot:1, but I would venture the FLASH stick to be your cheapest option. It's all on Ebay :o) All the best !!! Phil -Original Message- From: The Edward Groove [mailto:[EMAIL PROTECTED]] Sent: Saturday, April 06, 2002 1:09 PM To: 'Circusnuts_1999' Subject: RE: Supervisor III [7:40659] thanks for your help, phil. do you have any idea how i can upgrade the memory, if my sup comes only with 4flash/32dram? have you ever done this? do you have any part numbers? eddie -Original Message- From: Circusnuts_1999 [mailto:[EMAIL PROTECTED]] Sent: Saturday, April 06, 2002 10:26 AM To: 'The Edward Groove'; [EMAIL PROTECTED] Subject: RE: Supervisor III [7:40659] 6.3(3) requires 8 Megs FLASH and 64 Megs RAM and to be honest- I have never attempted to Xmodem or Kermit and image without some sort of network blade. Here's the output from my lab switch: cat55k Sho Version WS-C5505 Software, Version McpSW: 6.2(1a) NmpSW: 6.2(1a) Copyright (c) 1995-2002 by Cisco Systems NMP S/W compiled on Feb 10 2002, 19:54:09 MCP S/W compiled on Feb 10 2002, 19:49:14 System Bootstrap Version: 3.1.2 Hardware Version: 1.0 Model: WS-C5505 Serial #: 066552032 Mod Port Model Serial # Versions --- -- - 1 2WS-X5530 007586158 Hw : 1.5 Fw : 3.1.2 Fw1: 3.1(2) Sw : 6.2(1a) WS-F5520 007602065 Hw : 1.0 WS-U5531 007440134 Hw : 1.1 2 24 WS-X5224 008727049 Hw : 1.4 Fw : 3.1(1) Sw : 6.2(1a) 5 12 WS-X5213A 006815004 Hw : 2.0 Fw : 1.4 Sw : 6.2(1a) DRAMFLASH NVRAM Module Total UsedFreeTotal UsedFreeTotal Used Free -- --- --- --- --- --- --- - - - 1 65536K 20805K 44731K 8192K 5916K 2276K 512K 177K 335K Uptime is 0 day, 2 hours, 56 minutes The uplink module is the WS-U5531 and this is the RJ45 version. All the best !!! Phil -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of The Edward Groove Sent: Friday, April 05, 2002 9:24 PM To: [EMAIL PROTECTED] Subject: Supervisor III [7:40659] Hello, I need some help in answering a few questions. If i have a supervisor III (WS-X5530-E1) with no uplink modules on a Cat 5500, and need to know the minimum requirements to be able to load a newer IOS. First of all, do I need at least one switching module installed, or is there another way to upload the IOS? The memory on the Sup III is 32DRAM/4Flash. Is this configuration compatible with version 6.3(3a)? I can't seem to find any documentation on Cisco's site regarding this. Thanks in advance! Eddie [GroupStudy.com removed an attachment of type image/jpeg which had a name of Notebook.jpg] _ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com From: Madeline Dang [[EMAIL PROTECTED]] Sent: Monday, March 25, 2002 4:49 PM To: Circusnuts_1999 Subject: RE: Question for seller -- Item #2011782719 Thank you for your email. I don't have these module post on the web. THese memory are hard to find, and I only have a dozen on hand incase my customer bought the wrong memory and wish to exchange. Anyway, your subtotal including shipping and handling is $36.50 These memory do carry 30 day waranty, just like all the memory on my auctions. I accept Paypal, Bidpay, Cashier Check or Money order My paypal ID: [EMAIL PROTECTED] For cashier check or money order, please send to: Madeline Dang 1686 W. Recreo Plaza Anaheim, CA 92802 --- Circusnuts_1999 wrote: > Sure- do I need to bid on an auction or can I > purchase this outright ??? > > Would you have a total with shipping ??? > > Thanks > Phil Lorenz > 3289 Greco Ct. > Woodbridge, VA > 22192 > > > -Original Message- > From: Madeline Dang [mailto:[EMAIL PROTECTED]] > Sent: Monday, March 25, 2002 12:54 AM > To: [EMAIL PROTECTED] > Subject: Re: Question for seller -- Item #2011782719 > > THank you for your email. > > your board work on 2k refresh memory. > If you use 4k refresh memory on 2k board, then the > memory only recognize 1/2 or 1/4 of the total size > of > the memory. > > I do carry 2x32mb 2k refresh for $30 if need. >
RE: Supervisor III [7:40659]
6.3(3) requires 8 Megs FLASH and 64 Megs RAM and to be honest- I have never attempted to Xmodem or Kermit and image without some sort of network blade. Here's the output from my lab switch: cat55k Sho Version WS-C5505 Software, Version McpSW: 6.2(1a) NmpSW: 6.2(1a) Copyright (c) 1995-2002 by Cisco Systems NMP S/W compiled on Feb 10 2002, 19:54:09 MCP S/W compiled on Feb 10 2002, 19:49:14 System Bootstrap Version: 3.1.2 Hardware Version: 1.0 Model: WS-C5505 Serial #: 066552032 Mod Port Model Serial # Versions --- -- - 1 2WS-X5530 007586158 Hw : 1.5 Fw : 3.1.2 Fw1: 3.1(2) Sw : 6.2(1a) WS-F5520 007602065 Hw : 1.0 WS-U5531 007440134 Hw : 1.1 2 24 WS-X5224 008727049 Hw : 1.4 Fw : 3.1(1) Sw : 6.2(1a) 5 12 WS-X5213A 006815004 Hw : 2.0 Fw : 1.4 Sw : 6.2(1a) DRAMFLASH NVRAM Module Total UsedFreeTotal UsedFreeTotal Used Free -- --- --- --- --- --- --- - - - 1 65536K 20805K 44731K 8192K 5916K 2276K 512K 177K 335K Uptime is 0 day, 2 hours, 56 minutes The uplink module is the WS-U5531 and this is the RJ45 version. All the best !!! Phil -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of The Edward Groove Sent: Friday, April 05, 2002 9:24 PM To: [EMAIL PROTECTED] Subject: Supervisor III [7:40659] Hello, I need some help in answering a few questions. If i have a supervisor III (WS-X5530-E1) with no uplink modules on a Cat 5500, and need to know the minimum requirements to be able to load a newer IOS. First of all, do I need at least one switching module installed, or is there another way to upload the IOS? The memory on the Sup III is 32DRAM/4Flash. Is this configuration compatible with version 6.3(3a)? I can't seem to find any documentation on Cisco's site regarding this. Thanks in advance! Eddie [GroupStudy.com removed an attachment of type image/jpeg which had a name of Notebook.jpg] Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=40684&t=40659 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Supervisor III [7:40659]
The answer is in the Release Notes area of CCO. I assume that you have a CCO login that allows access to the Software Center. From there go to LAN Switching Software, then Catalyst 5000, scroll down to "Documentation/Release Information for the Catalyst 5000 Series" and click on "Catalyst 5000 Series Release Notes". Choose the notes for version 6.x and look for Memory Requirements. You should be here: (watch the wrap) http://www.cisco.com/univercd/cc/td/doc/product/lan/cat5000/c5krn/sw_rns/78_ 11304.htm#xtocid2 And read: The Catalyst 5000 family supervisor engine 6.x software releases require a minimum of 64-MB DRAM installed on Supervisor Engine III and 32-MB DRAM installed on Supervisor Engines II G and III G. If you go to the 5.x Release notes: The Catalyst 5000 family supervisor engine 5.x software releases require a minimum of 32-MB DRAM installed on your supervisor engine. I'd suggest a thorough read of the notes to verify if any special firmware upgrade is also required. It would be nice if you have a Flash Card to store several versions of OS. In your config file point to the desired version. I can't answer your other questions. > -Original Message- > From: The Edward Groove [mailto:[EMAIL PROTECTED]] > Sent: Friday, April 05, 2002 8:24 PM > To: [EMAIL PROTECTED] > Subject: Supervisor III [7:40659] > > > Hello, > > I need some help in answering a few questions. > > If i have a supervisor III (WS-X5530-E1) with no uplink > modules on a Cat > 5500, and need to know the minimum requirements to be able to load a > newer IOS. > > First of all, do I need at least one switching module installed, or is > there another way to upload the IOS? > > The memory on the Sup III is 32DRAM/4Flash. Is this configuration > compatible with version 6.3(3a)? > > I can't seem to find any documentation on Cisco's site regarding this. > > Thanks in advance! > > Eddie > > [GroupStudy.com removed an attachment of type image/jpeg > which had a name of > Notebook.jpg] Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=40661&t=40659 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Supervisor III [7:40659]
Hello, I need some help in answering a few questions. If i have a supervisor III (WS-X5530-E1) with no uplink modules on a Cat 5500, and need to know the minimum requirements to be able to load a newer IOS. First of all, do I need at least one switching module installed, or is there another way to upload the IOS? The memory on the Sup III is 32DRAM/4Flash. Is this configuration compatible with version 6.3(3a)? I can't seem to find any documentation on Cisco's site regarding this. Thanks in advance! Eddie [GroupStudy.com removed an attachment of type image/jpeg which had a name of Notebook.jpg] Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=40659&t=40659 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]