Re: VTP Domain Name
Just to clarify in reference to this statement:
>Which switches on your network are configured as servers? If there
>aren't any configured as servers, then the switch will inherit the VTP
>domain from any other switch as long as the VTP revision number is higher
>than its own.
On the 2948G (which runs the 5500 IOS) the switch inherits the VTP
configuration from a switch with a higher revision number if it's in the
same VTP domain and has the proper password. Is that what you meant to say
or do the 2924s work differently? I know there are at least two version of
VTP, so maybe that's where I'm confused.
Lorenzo
>From: [EMAIL PROTECTED]
>To: "Lorenzo Montezemolo" <[EMAIL PROTECTED]>, "Masaru Umetsu"
><[EMAIL PROTECTED]>
>CC: [EMAIL PROTECTED]
>Subject: Re: VTP Domain Name
>Date: Thu, 31 Aug 2000 16:00:27 -0700
>
>
>The 2924XL uses the IOS based software. How you reset it depends on whether
>its a client or a VTP server.
>
>If its a server, you go into VLAN configuration mode ("vlan database"
>command), set the VTP domain ("vtp domain "), and then set it as the
>server ("vtp server"). If you've configured a domain name and you want to
>erase it and leave the domain name empty, try using the "vtp domain"
>command without a domain name specified.
>
>If its a client, all you have to do is go into VLAN config mode and set it
>as a client ("vtp client"). It will inherit the VTP domain and revision
>number from the first VTP advertisement it hears.
>
>If all else fails, there's probably something squirly and you might be
>better off just TFTPing a brand new config to the box (minus a VTP domain).
>You might also want to take a look at where it's getting its VTP adverts
>from. Which switches on your network are configured as servers? If there
>aren't any configured as servers, then the switch will inherit the VTP
>domain from any other switch as long as the VTP revision number is higher
>than its own.
>
>Hope this helps
>
>Karen E Young
>Network Engineer
>ELF Technologies, Inc
>[EMAIL PROTECTED]
>
>
>
>
> "Lorenzo
> Montezemolo"To: [EMAIL PROTECTED]
> tmail.com> Subject: Re: VTP Domain
>Name
> Sent by:
> nobody@groupstud
> y.com
>
>
> 08/31/2000 03:02
> PM
> Please respond
> to "Lorenzo
> Montezemolo"
>
>
>
>
>
>I think if you want to completely reset the switch configuration you can
>type the following:
>
>clear config all
>
>I'm not sure it'll work on a 2924 because I'm not familiar with them, but
>it
>certainly works on a 2948G.
>
>Give it a try, but be aware that on the 2948G, this literally resets the
>running config as if you had just taken it out of the box. That means you
>lose VLANs (except for VLAN1) and all the configuration options get set to
>the default.
>
>
>"Masaru Umetsu" <[EMAIL PROTECTED]> wrote in message
>[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
>| Please tell me how to clear the vtp domain name in Catalyst 2924!
>|
>| Vtp domain name isn't set anything first.Then I configured it to
>| Cisco but, I want to back to the initial.
>| I did 'write erase', but vtp domain name wasn't cleared.
>|
>| _/_/_/_/_/__/_/_/_/_/_/_/_/_/_/
>| Masaru Umetsu
>| E-mail:[EMAIL PROTECTED]
>| _/_/_/_/_/_/_/_/_/_/_/_/_/_/_/
>| Where there's a will, there's a way.
>|
>| ___
>| UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
>| FAQ, list archives, and subscription info: http://www.groupstudy.com
>| Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>|
>
>
>___
>UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
>FAQ, list archives, and subscription info: http://www.groupstudy.com
>Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
>
>
>
_
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.
Share information about yourself, create your own public profile at
http://profiles.msn.com.
___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: VTP Domain Name
The 2924XL uses the IOS based software. How you reset it depends on whether
its a client or a VTP server.
If its a server, you go into VLAN configuration mode ("vlan database"
command), set the VTP domain ("vtp domain "), and then set it as the
server ("vtp server"). If you've configured a domain name and you want to
erase it and leave the domain name empty, try using the "vtp domain"
command without a domain name specified.
If its a client, all you have to do is go into VLAN config mode and set it
as a client ("vtp client"). It will inherit the VTP domain and revision
number from the first VTP advertisement it hears.
If all else fails, there's probably something squirly and you might be
better off just TFTPing a brand new config to the box (minus a VTP domain).
You might also want to take a look at where it's getting its VTP adverts
from. Which switches on your network are configured as servers? If there
aren't any configured as servers, then the switch will inherit the VTP
domain from any other switch as long as the VTP revision number is higher
than its own.
Hope this helps
Karen E Young
Network Engineer
ELF Technologies, Inc
[EMAIL PROTECTED]
"Lorenzo
Montezemolo"To: [EMAIL PROTECTED]
Subject: Re: VTP Domain Name
Sent by:
nobody@groupstud
y.com
08/31/2000 03:02
PM
Please respond
to "Lorenzo
Montezemolo"
I think if you want to completely reset the switch configuration you can
type the following:
clear config all
I'm not sure it'll work on a 2924 because I'm not familiar with them, but
it
certainly works on a 2948G.
Give it a try, but be aware that on the 2948G, this literally resets the
running config as if you had just taken it out of the box. That means you
lose VLANs (except for VLAN1) and all the configuration options get set to
the default.
"Masaru Umetsu" <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
| Please tell me how to clear the vtp domain name in Catalyst 2924!
|
| Vtp domain name isn't set anything first.Then I configured it to
| Cisco but, I want to back to the initial.
| I did 'write erase', but vtp domain name wasn't cleared.
|
| _/_/_/_/_/__/_/_/_/_/_/_/_/_/_/
| Masaru Umetsu
| E-mail:[EMAIL PROTECTED]
| _/_/_/_/_/_/_/_/_/_/_/_/_/_/_/
| Where there's a will, there's a way.
|
| ___
| UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
| FAQ, list archives, and subscription info: http://www.groupstudy.com
| Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
|
___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: VTP Domain Name
I think if you want to completely reset the switch configuration you can type the following: clear config all I'm not sure it'll work on a 2924 because I'm not familiar with them, but it certainly works on a 2948G. Give it a try, but be aware that on the 2948G, this literally resets the running config as if you had just taken it out of the box. That means you lose VLANs (except for VLAN1) and all the configuration options get set to the default. "Masaru Umetsu" <[EMAIL PROTECTED]> wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... | Please tell me how to clear the vtp domain name in Catalyst 2924! | | Vtp domain name isn't set anything first.Then I configured it to | Cisco but, I want to back to the initial. | I did 'write erase', but vtp domain name wasn't cleared. | | _/_/_/_/_/__/_/_/_/_/_/_/_/_/_/ | Masaru Umetsu | E-mail:[EMAIL PROTECTED] | _/_/_/_/_/_/_/_/_/_/_/_/_/_/_/ | Where there's a will, there's a way. | | ___ | UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html | FAQ, list archives, and subscription info: http://www.groupstudy.com | Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] | ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
VTP Domain Name
Please tell me how to clear the vtp domain name in Catalyst 2924! Vtp domain name isn't set anything first.Then I configured it to Cisco but, I want to back to the initial. I did 'write erase', but vtp domain name wasn't cleared. _/_/_/_/_/__/_/_/_/_/_/_/_/_/_/ Masaru Umetsu E-mail:[EMAIL PROTECTED] _/_/_/_/_/_/_/_/_/_/_/_/_/_/_/ Where there's a will, there's a way. ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
