Re: two 8 megs of flash on a 2501 [7:439]
K- not again. #no partition FLASH or set your partition to (1) 16 size. I have not done this for awhile, but I think you must erase the IOS in some instances. Again- there are a couple of ways to do this, but #no partition FLASH has always done the job for me. All the best !!! Phil - Original Message - From: Frank Kim To: Sent: Thursday, April 12, 2001 9:27 PM Subject: two 8 megs of flash on a 2501 [7:439] > Hi folks, > Is it possible to combine two flash partition into one so I can put a > bigger ios image in the router? Currently it shows as: > > Router>sh ver > Cisco Internetwork Operating System Software > IOS (tm) 2500 Software (C2500-D-L), Version 12.0(12), RELEASE SOFTWARE > (fc1) > Copyright (c) 1986-2000 by cisco Systems, Inc. > Compiled Tue 11-Jul-00 08:19 by htseng > Image text-base: 0x030388DC, data-base: 0x1000 > > ROM: System Bootstrap, Version 5.2(8a), RELEASE SOFTWARE > BOOTFLASH: 3000 Bootstrap Software (IGS-RXBOOT), Version 10.2(8a), RELEASE > SOFTWARE (fc1) > > Router uptime is 1 hour, 11 minutes > System restarted by power-on > System image file is "flash:c2500-d-l.120-12.bin" > > cisco 2500 (68030) processor (revision F) with 16384K/2048K bytes of > memory. > Processor board ID 04849258, with hardware revision > Bridging software. > X.25 software, Version 3.0.0. > 1 Ethernet/IEEE 802.3 interface(s) > 2 Serial network interface(s) > 32K bytes of non-volatile configuration memory. > 8192K bytes of processor board System flash partition 1 (Read ONLY) > 8192K bytes of processor board System flash partition 2 (Read/Write) > > Configuration register is 0x2102 > > > > Thanks for any help. > > -Frank > FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=443&t=439 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: two 8 megs of flash on a 2501 [7:439]
you want to Router#erase flash first to delete the files in on of those partitions (partition 2 in this case). Then, Partition the flash with Router(config)#partition flash 1 16 where 1 is the partition number and 16 is the size (in MB) of the partition. Let me know if you have other questions regarding this problem. -Original Message- From: Frank Kim [mailto:[EMAIL PROTECTED]] Sent: Thursday, April 12, 2001 9:28 PM To: [EMAIL PROTECTED] Subject: two 8 megs of flash on a 2501 [7:439] Hi folks, Is it possible to combine two flash partition into one so I can put a bigger ios image in the router? Currently it shows as: Router>sh ver Cisco Internetwork Operating System Software IOS (tm) 2500 Software (C2500-D-L), Version 12.0(12), RELEASE SOFTWARE (fc1) Copyright (c) 1986-2000 by cisco Systems, Inc. Compiled Tue 11-Jul-00 08:19 by htseng Image text-base: 0x030388DC, data-base: 0x1000 ROM: System Bootstrap, Version 5.2(8a), RELEASE SOFTWARE BOOTFLASH: 3000 Bootstrap Software (IGS-RXBOOT), Version 10.2(8a), RELEASE SOFTWARE (fc1) Router uptime is 1 hour, 11 minutes System restarted by power-on System image file is "flash:c2500-d-l.120-12.bin" cisco 2500 (68030) processor (revision F) with 16384K/2048K bytes of memory. Processor board ID 04849258, with hardware revision Bridging software. X.25 software, Version 3.0.0. 1 Ethernet/IEEE 802.3 interface(s) 2 Serial network interface(s) 32K bytes of non-volatile configuration memory. 8192K bytes of processor board System flash partition 1 (Read ONLY) 8192K bytes of processor board System flash partition 2 (Read/Write) Configuration register is 0x2102 Thanks for any help. -Frank FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] * DISCLAIMER: The information contained in this e-mail may be confidential and is intended solely for the use of the named addressee. Access, copying or re-use of the e-mail or any information contained therein by any other person is not authorized. If you are not the intended recipient please notify us immediately by returning the e-mail to the originator. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=442&t=439 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
two 8 megs of flash on a 2501 [7:439]
Hi folks, Is it possible to combine two flash partition into one so I can put a bigger ios image in the router? Currently it shows as: Router>sh ver Cisco Internetwork Operating System Software IOS (tm) 2500 Software (C2500-D-L), Version 12.0(12), RELEASE SOFTWARE (fc1) Copyright (c) 1986-2000 by cisco Systems, Inc. Compiled Tue 11-Jul-00 08:19 by htseng Image text-base: 0x030388DC, data-base: 0x1000 ROM: System Bootstrap, Version 5.2(8a), RELEASE SOFTWARE BOOTFLASH: 3000 Bootstrap Software (IGS-RXBOOT), Version 10.2(8a), RELEASE SOFTWARE (fc1) Router uptime is 1 hour, 11 minutes System restarted by power-on System image file is "flash:c2500-d-l.120-12.bin" cisco 2500 (68030) processor (revision F) with 16384K/2048K bytes of memory. Processor board ID 04849258, with hardware revision Bridging software. X.25 software, Version 3.0.0. 1 Ethernet/IEEE 802.3 interface(s) 2 Serial network interface(s) 32K bytes of non-volatile configuration memory. 8192K bytes of processor board System flash partition 1 (Read ONLY) 8192K bytes of processor board System flash partition 2 (Read/Write) Configuration register is 0x2102 Thanks for any help. -Frank Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=439&t=439 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
