Stus-List Spring Projects
Listers, Now that Spring has finally sprung, I was curious to see what other listers have planned for their Spring projects on their CCs. So far, planned for the Enterprise: Relocate engine gauges and move engine-starting switches. change transmission/throttle controls at helm New coat of Petit Vivid Add another coat or two of boot stripes New interior cushions Add cockpit lighting (Maybe) Bolt centerboard inside keel and cover up the “slot” Install bimini Redo the remaining floorboards Store spinnaker pole Install Tactick wind vane and repeater Service the refrigerator. Install two solar vents All the best, Edd Edd M. Schillay Starship Enterprise CC 37+ | Sail No: NCC-1701-B City Island, NY Starship Enterprise's Captain's Log ___ This List is provided by the CC Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com
Re: Stus-List Cruising Mexico Caib side - Belize - Rio Dulce
On Fri, Mar 21, 2014 at 9:56 AM, Stephen Thorne stephenltho...@gmail.comwrote: Guys, new subject here. I want to doing some sailing down coast of Mexico (Carib side) to Belize and then to Rio Dulce. Has anyone done this trip and if so any advise for someone first time? What about charts of area - best source? Any good cruising guides? Appreciate your help. Stephen CC 34+ Deja Vu I brought a boat up from the Rio Dulce last spring. I loved the area. My Navionics charts gave me pretty much what I needed there, though they don't have a lot of detail. They seemed pretty good for Belize, etc. too. A caveat with Navionics: you often have to zoom fairly close to see interesting details like rocks. let me know if you decide to go and I'll forward you some good contacts in the river. There's a nice cruising community there. The river bar is something of an adventure in that there's only about 6.5' of water over it. We were pretty loaded down and had to plough our way out with three crewmembers at the end of the boom tipping the boat over. Andy CC 40 Peregrine ___ This List is provided by the CC Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com
Re: Stus-List Spring Projects
On Suhana: - Paint boot stripes (brightside or perfection, haven't decided yet but keeping original CC red/blue/darker blue) - bottom paint - repack stuffing box - dismantle pedestal and inspect steering components, replace/repair as necessary - Ambitious but, repaint pedestal. - exhaust hose replacement - tune up the A4 (all ignition components and install new racor) - replace mast collar - rigging inspection - new halyards - washdown pump - install tank level monitor (thanks Fred) We'll see how much of that I get done. Steve Suhana, CC 32 Toronto On Fri, Mar 21, 2014 at 10:13 AM, Edd Schillay e...@schillay.com wrote: Listers, Now that Spring has finally sprung, I was curious to see what other listers have planned for their Spring projects on their CCs. So far, planned for the Enterprise: - Relocate engine gauges and move engine-starting switches. - change transmission/throttle controls at helm - New coat of Petit Vivid - Add another coat or two of boot stripes - New interior cushions - Add cockpit lighting - (Maybe) Bolt centerboard inside keel and cover up the slot - Install bimini - Redo the remaining floorboards - Store spinnaker pole - Install Tactick wind vane and repeater - Service the refrigerator. - Install two solar vents All the best, Edd Edd M. Schillay Starship Enterprise CC 37+ | Sail No: NCC-1701-B City Island, NY Starship Enterprise's Captain's Log http://enterpriseb.blogspot.com/ ___ This List is provided by the CC Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com ___ This List is provided by the CC Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com
Re: Stus-List Spring Projects
Ed Are you done with racing? If not then shouldn't you upgrade the Warp drive? Mike From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Edd Schillay Sent: Friday, March 21, 2014 11:14 AM To: cnc-list@cnc-list.com Subject: Stus-List Spring Projects Listers, Now that Spring has finally sprung, I was curious to see what other listers have planned for their Spring projects on their CCs. So far, planned for the Enterprise: * Relocate engine gauges and move engine-starting switches. * change transmission/throttle controls at helm * New coat of Petit Vivid * Add another coat or two of boot stripes * New interior cushions * Add cockpit lighting * (Maybe) Bolt centerboard inside keel and cover up the slot * Install bimini * Redo the remaining floorboards * Store spinnaker pole * Install Tactick wind vane and repeater * Service the refrigerator. * Install two solar vents All the best, Edd Edd M. Schillay Starship Enterprise CC 37+ | Sail No: NCC-1701-B City Island, NY Starship Enterprise's Captain's Log http://enterpriseb.blogspot.com/ ___ This List is provided by the CC Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com
Re: Stus-List Spring Projects
Mike, Not done with racing just yet, but certainly winding down. I have trouble getting crew to commit to weekends (families and wives and such) and my local racing association is slowly imploding, so weeknight racing my be history soon. Nevertheless, I had UK store, clean, inspect and repair my sails over the winter. All the best, Edd Edd M. Schillay Starship Enterprise CC 37+ | Sail No: NCC-1701-B City Island, NY Starship Enterprise's Captain's Log On Mar 21, 2014, at 10:32 AM, Hoyt, Mike mike.h...@impgroup.com wrote: Ed Are you done with racing? If not then shouldn’t you upgrade the Warp drive? Mike From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Edd Schillay Sent: Friday, March 21, 2014 11:14 AM To: cnc-list@cnc-list.com Subject: Stus-List Spring Projects Listers, Now that Spring has finally sprung, I was curious to see what other listers have planned for their Spring projects on their CCs. So far, planned for the Enterprise: Relocate engine gauges and move engine-starting switches. change transmission/throttle controls at helm New coat of Petit Vivid Add another coat or two of boot stripes New interior cushions Add cockpit lighting (Maybe) Bolt centerboard inside keel and cover up the “slot” Install bimini Redo the remaining floorboards Store spinnaker pole Install Tactick wind vane and repeater Service the refrigerator. Install two solar vents All the best, Edd Edd M. Schillay Starship Enterprise CC 37+ | Sail No: NCC-1701-B City Island, NY Starship Enterprise's Captain's Log ___ This List is provided by the CC Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com ___ This List is provided by the CC Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com
Re: Stus-List Anyone need some CC30 parts?
The cracks along the keel to hull joint look like the usual CC smile. The whack in the leading edge of the keel looks pretty serious - it is right over the keel to hull joint, so there would need to be some lead work (filling, but could be with something other than lead -small ding when looking at the size of the keel) and some glass filling. The hulls below the water line are not cored - I put a new hole in mine for the speed xducer and it came out all glass. I guess the buyer would have to figure out what to do - could get a cheap (good) boat depending on what other equipment is offered for a minimal amount of work - and depending on the price. Gary - Original Message - From: Brent Driedger bren...@highspeedcrow.ca To: CC List cnc-list@cnc-list.com Sent: Thursday, March 20, 2014 10:12 PM Subject: Re: Stus-List Anyone need some CC30 parts? You know, she doesn’t look that bad. The keel stub is repairable and built like a tank. The hull… I’m not sure, are these boats cored? If so bring in the chain saws…. Brent Driedger 27-5 s/v Wild Rover On Mar 20, 2014, at 7:54 PM, j...@svpaws.net wrote: Paul - where are you located? I know a Paul Baker. John Sent from my iPad On Mar 20, 2014, at 7:48 PM, Paul Baker pauljba...@shaw.ca wrote: I looked at this one last year before getting my current boat, looks like she's been in the wars since. IIRC she was nicely equipped for racing. Sad. http://www.usedvictoria.com/classified-ad/SALVAGE-SALE-1976-30-ft-CC-Fibreglass-Sailboat_21760888 ___ This List is provided by the CC Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com ___ This List is provided by the CC Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com ___ This List is provided by the CC Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com ___ This List is provided by the CC Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com
Re: Stus-List Anyone need some CC30 parts?
There are no pictures of the interior, maybe racoons have been living on it. Anything's possible. My point being that the keel may not be the only problem. Steve Suhana, CC 32 Toronto On Fri, Mar 21, 2014 at 10:38 AM, Gary Nylander gnylan...@atlanticbb.netwrote: The cracks along the keel to hull joint look like the usual CC smile. The whack in the leading edge of the keel looks pretty serious - it is right over the keel to hull joint, so there would need to be some lead work (filling, but could be with something other than lead -small ding when looking at the size of the keel) and some glass filling. The hulls below the water line are not cored - I put a new hole in mine for the speed xducer and it came out all glass. I guess the buyer would have to figure out what to do - could get a cheap (good) boat depending on what other equipment is offered for a minimal amount of work - and depending on the price. Gary - Original Message - From: Brent Driedger bren...@highspeedcrow.ca To: CC List cnc-list@cnc-list.com Sent: Thursday, March 20, 2014 10:12 PM Subject: Re: Stus-List Anyone need some CC30 parts? You know, she doesn't look that bad. The keel stub is repairable and built like a tank. The hull... I'm not sure, are these boats cored? If so bring in the chain saws Brent Driedger 27-5 s/v Wild Rover On Mar 20, 2014, at 7:54 PM, j...@svpaws.net wrote: Paul - where are you located? I know a Paul Baker. John Sent from my iPad On Mar 20, 2014, at 7:48 PM, Paul Baker pauljba...@shaw.ca wrote: I looked at this one last year before getting my current boat, looks like she's been in the wars since. IIRC she was nicely equipped for racing. Sad. http://www.usedvictoria.com/classified-ad/SALVAGE-SALE- 1976-30-ft-CC-Fibreglass-Sailboat_21760888 ___ This List is provided by the CC Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com ___ This List is provided by the CC Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com ___ This List is provided by the CC Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com ___ This List is provided by the CC Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com ___ This List is provided by the CC Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com
Re: Stus-List Spring Projects - checklist
Don't forget, your spring re-commissioning checklist can be found on the Photoalbum website in the DIY section. You can go to it directly at: http://www.cncphotoalbum.com/download/checklist.pdf Brought to you by your wonderful list-funded CC resource site. Support for this checklist and other CC resources can be provided by clicking Support in the Chandelry section in the left sidebar or directly at: http://www.cncphotoalbum.com/chandlery_2/store.php?crn=226 Dennis C. Touche' 35-1 #83 Mandeville, LA On Fri, Mar 21, 2014 at 9:13 AM, Edd Schillay e...@schillay.com wrote: Listers, Now that Spring has finally sprung, I was curious to see what other listers have planned for their Spring projects on their CCs. So far, planned for the Enterprise: - Relocate engine gauges and move engine-starting switches. - change transmission/throttle controls at helm - New coat of Petit Vivid - Add another coat or two of boot stripes - New interior cushions - Add cockpit lighting - (Maybe) Bolt centerboard inside keel and cover up the slot - Install bimini - Redo the remaining floorboards - Store spinnaker pole - Install Tactick wind vane and repeater - Service the refrigerator. - Install two solar vents All the best, Edd Edd M. Schillay Starship Enterprise CC 37+ | Sail No: NCC-1701-B City Island, NY Starship Enterprise's Captain's Log http://enterpriseb.blogspot.com/ ___ This List is provided by the CC Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com ___ This List is provided by the CC Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com
Re: Stus-List Spring Projects
Thanks Edd Add a bimini and Store the spin pole kinda looked like putting racing to bed. Expand the refrigerator could be going either way though From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Edd Schillay Sent: Friday, March 21, 2014 11:38 AM To: cnc-list@cnc-list.com Subject: Re: Stus-List Spring Projects Mike, Not done with racing just yet, but certainly winding down. I have trouble getting crew to commit to weekends (families and wives and such) and my local racing association is slowly imploding, so weeknight racing my be history soon. Nevertheless, I had UK store, clean, inspect and repair my sails over the winter. All the best, Edd Edd M. Schillay Starship Enterprise CC 37+ | Sail No: NCC-1701-B City Island, NY Starship Enterprise's Captain's Log http://enterpriseb.blogspot.com/ On Mar 21, 2014, at 10:32 AM, Hoyt, Mike mike.h...@impgroup.com wrote: Ed Are you done with racing? If not then shouldn't you upgrade the Warp drive? Mike From: CnC-List [mailto:cnc-list-boun...@cnc-list.com mailto:cnc-list-boun...@cnc-list.com ] On Behalf Of Edd Schillay Sent: Friday, March 21, 2014 11:14 AM To: cnc-list@cnc-list.com mailto:cnc-list@cnc-list.com Subject: Stus-List Spring Projects Listers, Now that Spring has finally sprung, I was curious to see what other listers have planned for their Spring projects on their CCs. So far, planned for the Enterprise: * Relocate engine gauges and move engine-starting switches. * change transmission/throttle controls at helm * New coat of Petit Vivid * Add another coat or two of boot stripes * New interior cushions * Add cockpit lighting * (Maybe) Bolt centerboard inside keel and cover up the slot * Install bimini * Redo the remaining floorboards * Store spinnaker pole * Install Tactick wind vane and repeater * Service the refrigerator. * Install two solar vents All the best, Edd Edd M. Schillay Starship Enterprise CC 37+ | Sail No: NCC-1701-B City Island, NY Starship Enterprise's Captain's Log http://enterpriseb.blogspot.com/ ___ This List is provided by the CC Photo Album http://www.cncphotoalbum.com http://www.cncphotoalbum.com/ CnC-List@cnc-list.com mailto:CnC-List@cnc-list.com ___ This List is provided by the CC Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com
Re: Stus-List Spring Projects
Completed (not by me) Cutlass bearing Re do Max Prop repack stuffing box Paint bottom (next week) (by me) new clutches - port side 2 new thru hulls/seacocks in bow New hoses for head/relocate vented loops for more storage under vee berth Remove/replace plotter Boot stripes - Red/Sapphire Blue Built emergency rudder and MOB pole Still to do: install new triducer replace outhaul and reefing lines finish gybe preventer connect plotter to VHF locate/repair leak (probably from winch) install MOB pole holder a/k/a a piece of PVC Launch in one week!! Joel On Fri, Mar 21, 2014 at 10:23 AM, Stevan Plavsa stevanpla...@gmail.comwrote: On Suhana: - Paint boot stripes (brightside or perfection, haven't decided yet but keeping original CC red/blue/darker blue) - bottom paint - repack stuffing box - dismantle pedestal and inspect steering components, replace/repair as necessary - Ambitious but, repaint pedestal. - exhaust hose replacement - tune up the A4 (all ignition components and install new racor) - replace mast collar - rigging inspection - new halyards - washdown pump - install tank level monitor (thanks Fred) We'll see how much of that I get done. Steve Suhana, CC 32 Toronto On Fri, Mar 21, 2014 at 10:13 AM, Edd Schillay e...@schillay.com wrote: Listers, Now that Spring has finally sprung, I was curious to see what other listers have planned for their Spring projects on their CCs. So far, planned for the Enterprise: - Relocate engine gauges and move engine-starting switches. - change transmission/throttle controls at helm - New coat of Petit Vivid - Add another coat or two of boot stripes - New interior cushions - Add cockpit lighting - (Maybe) Bolt centerboard inside keel and cover up the slot - Install bimini - Redo the remaining floorboards - Store spinnaker pole - Install Tactick wind vane and repeater - Service the refrigerator. - Install two solar vents All the best, Edd Edd M. Schillay Starship Enterprise CC 37+ | Sail No: NCC-1701-B City Island, NY Starship Enterprise's Captain's Log http://enterpriseb.blogspot.com/ ___ This List is provided by the CC Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com ___ This List is provided by the CC Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com -- Joel 301 541 8551 ___ This List is provided by the CC Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com
Re: Stus-List Spring Projects
The water is still a bit too solid here for launching From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Joel Aronson Sent: Friday, March 21, 2014 11:57 AM To: cnc-list@cnc-list.com Subject: Re: Stus-List Spring Projects Completed (not by me) Cutlass bearing Re do Max Prop repack stuffing box Paint bottom (next week) (by me) new clutches - port side 2 new thru hulls/seacocks in bow New hoses for head/relocate vented loops for more storage under vee berth Remove/replace plotter Boot stripes - Red/Sapphire Blue Built emergency rudder and MOB pole Still to do: install new triducer replace outhaul and reefing lines finish gybe preventer connect plotter to VHF locate/repair leak (probably from winch) install MOB pole holder a/k/a a piece of PVC Launch in one week!! Joel On Fri, Mar 21, 2014 at 10:23 AM, Stevan Plavsa stevanpla...@gmail.com wrote: On Suhana: - Paint boot stripes (brightside or perfection, haven't decided yet but keeping original CC red/blue/darker blue) - bottom paint - repack stuffing box - dismantle pedestal and inspect steering components, replace/repair as necessary - Ambitious but, repaint pedestal. - exhaust hose replacement - tune up the A4 (all ignition components and install new racor) - replace mast collar - rigging inspection - new halyards - washdown pump - install tank level monitor (thanks Fred) We'll see how much of that I get done. Steve Suhana, CC 32 Toronto On Fri, Mar 21, 2014 at 10:13 AM, Edd Schillay e...@schillay.com wrote: Listers, Now that Spring has finally sprung, I was curious to see what other listers have planned for their Spring projects on their CCs. So far, planned for the Enterprise: * Relocate engine gauges and move engine-starting switches. * change transmission/throttle controls at helm * New coat of Petit Vivid * Add another coat or two of boot stripes * New interior cushions * Add cockpit lighting * (Maybe) Bolt centerboard inside keel and cover up the slot * Install bimini * Redo the remaining floorboards * Store spinnaker pole * Install Tactick wind vane and repeater * Service the refrigerator. * Install two solar vents All the best, Edd Edd M. Schillay Starship Enterprise CC 37+ | Sail No: NCC-1701-B City Island, NY Starship Enterprise's Captain's Log http://enterpriseb.blogspot.com/ ___ This List is provided by the CC Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com ___ This List is provided by the CC Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com -- Joel 301 541 8551 ___ This List is provided by the CC Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com
Re: Stus-List Spring Projects
They removed the bubblers from the docks (yesterday) here on the Eastern Shore of Maryland. Time to get to work. Already put new bilge pump in the lowest part of the keel sump - on to a few annual maintenance issues, set the mast, and then go sailing! Gary - Original Message - From: Hoyt, Mike To: cnc-list@cnc-list.com Sent: Friday, March 21, 2014 11:09 AM Subject: Re: Stus-List Spring Projects The water is still a bit too solid here for launching From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Joel Aronson Sent: Friday, March 21, 2014 11:57 AM To: cnc-list@cnc-list.com Subject: Re: Stus-List Spring Projects Completed (not by me) Cutlass bearing Re do Max Prop repack stuffing box Paint bottom (next week) (by me) new clutches - port side 2 new thru hulls/seacocks in bow New hoses for head/relocate vented loops for more storage under vee berth Remove/replace plotter Boot stripes - Red/Sapphire Blue Built emergency rudder and MOB pole Still to do: install new triducer replace outhaul and reefing lines finish gybe preventer connect plotter to VHF locate/repair leak (probably from winch) install MOB pole holder a/k/a a piece of PVC Launch in one week!! Joel On Fri, Mar 21, 2014 at 10:23 AM, Stevan Plavsa stevanpla...@gmail.com wrote: On Suhana: - Paint boot stripes (brightside or perfection, haven't decided yet but keeping original CC red/blue/darker blue) - bottom paint - repack stuffing box - dismantle pedestal and inspect steering components, replace/repair as necessary - Ambitious but, repaint pedestal. - exhaust hose replacement - tune up the A4 (all ignition components and install new racor) - replace mast collar - rigging inspection - new halyards - washdown pump - install tank level monitor (thanks Fred) We'll see how much of that I get done. Steve Suhana, CC 32 Toronto On Fri, Mar 21, 2014 at 10:13 AM, Edd Schillay e...@schillay.com wrote: Listers, Now that Spring has finally sprung, I was curious to see what other listers have planned for their Spring projects on their CCs. So far, planned for the Enterprise: a.. Relocate engine gauges and move engine-starting switches. b.. change transmission/throttle controls at helm c.. New coat of Petit Vivid d.. Add another coat or two of boot stripes e.. New interior cushions f.. Add cockpit lighting g.. (Maybe) Bolt centerboard inside keel and cover up the slot h.. Install bimini i.. Redo the remaining floorboards j.. Store spinnaker pole k.. Install Tactick wind vane and repeater l.. Service the refrigerator. m.. Install two solar vents All the best, Edd Edd M. Schillay Starship Enterprise CC 37+ | Sail No: NCC-1701-B City Island, NY Starship Enterprise's Captain's Log ___ This List is provided by the CC Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com ___ This List is provided by the CC Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com -- Joel 301 541 8551 -- ___ This List is provided by the CC Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com ___ This List is provided by the CC Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com
Re: Stus-List Spring Projects
The wx here in Maryland has been beyond frustrating. For at least the last month it seems every week includes a perfect day for sailing and a snow storm! Joe Della Barba Coquina ___ This List is provided by the CC Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com
Re: Stus-List Boat names
Mark, I have to break it to you, 42 is not obscure. In a similar vein I was amazed when I had the Tardis (in 2002, pre Doctor Who relaunch) how many people - including the kids driving the tender - knew the name. Graham Collins Secret Plans CC 35-III #11 On 2014-03-18 11:48 AM, M Bod wrote: I've been saving several of the messages on how to remove old boat names. Planning on re-naming my CS30 this spring. Current name is Sea Fever - which is not bad, but does not speak to me personally. But I'm still not totally committed that I have the right need name. Like Steven I have had a running list of names that piqued my interest. I'm hoping to find something short, meaningful, unique and a bit witty. Love some of the names I see from this list (Oxygen, The Office, etc) - but I don't want to steal a unique name. My current favourite is Cracked - I am a chiropractor after all, plus I've been told multiple times that my views on the world can be twisted. Also relates back to the fact I was (and maybe still am a bit) concerned about the small cracks in the bilge ribs. Other front runners - 42 (The meaning of life, the universe, and everything - maybe too obscure) - Vita Brevis (Life is Short in Latin) - Therapy - Exit Strategy I could also use Bigger Picture (after my current Big Picture Mirage 24) I was tempted to go with 'Handbasket' - as in 'Where are we going. And how are we going to get there' - but don't want the negative implications it carries. Any brilliant and witty thoughts (or critiques) welcome Mark ___ This List is provided by the CC Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com ___ This List is provided by the CC Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com
Re: Stus-List Anyone need some CC30 parts?
True enough. Bulkheads could be black at the chain plates and that 40 year old rig would need $15k worth of refit. Brent. Sent from my iPhone On Mar 21, 2014, at 9:41 AM, Stevan Plavsa stevanpla...@gmail.com wrote: There are no pictures of the interior, maybe racoons have been living on it. Anything's possible. My point being that the keel may not be the only problem. Steve Suhana, CC 32 Toronto On Fri, Mar 21, 2014 at 10:38 AM, Gary Nylander gnylan...@atlanticbb.net wrote: The cracks along the keel to hull joint look like the usual CC smile. The whack in the leading edge of the keel looks pretty serious - it is right over the keel to hull joint, so there would need to be some lead work (filling, but could be with something other than lead -small ding when looking at the size of the keel) and some glass filling. The hulls below the water line are not cored - I put a new hole in mine for the speed xducer and it came out all glass. I guess the buyer would have to figure out what to do - could get a cheap (good) boat depending on what other equipment is offered for a minimal amount of work - and depending on the price. Gary - Original Message - From: Brent Driedger bren...@highspeedcrow.ca To: CC List cnc-list@cnc-list.com Sent: Thursday, March 20, 2014 10:12 PM Subject: Re: Stus-List Anyone need some CC30 parts? You know, she doesn’t look that bad. The keel stub is repairable and built like a tank. The hull… I’m not sure, are these boats cored? If so bring in the chain saws…. Brent Driedger 27-5 s/v Wild Rover On Mar 20, 2014, at 7:54 PM, j...@svpaws.net wrote: Paul - where are you located? I know a Paul Baker. John Sent from my iPad On Mar 20, 2014, at 7:48 PM, Paul Baker pauljba...@shaw.ca wrote: I looked at this one last year before getting my current boat, looks like she's been in the wars since. IIRC she was nicely equipped for racing. Sad. http://www.usedvictoria.com/classified-ad/SALVAGE-SALE-1976-30-ft-CC-Fibreglass-Sailboat_21760888 ___ This List is provided by the CC Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com ___ This List is provided by the CC Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com ___ This List is provided by the CC Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com ___ This List is provided by the CC Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com ___ This List is provided by the CC Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com ___ This List is provided by the CC Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com
