Re: Stus-List I am so done with bilge pumps...

[rjcasciato--- via CnC-List]

Hi DennisAre you referring to a bilge pump or the bilge pump high water switch...What's the model number of the system you've installed?ThanksRon C.Sent from XFINITY Connect Application-Original Message-From: cnc-list@cnc-list.comTo: cnc-list@cnc-list.comCc: capt...@gmail.comSent: 2018-07-24 10:30:37 PM Subject: Re: Stus-List I am so done with bilge pumps...Bob alludes to a critical but often overlooked issue.  Wiring that is too small to carry the amperage of a user, in this case, a bilge pump, can result in excessive voltage drop.  Low voltage could contribute to premature failure.I second the Ultra Safety Systems bilge pump.  I don't have one on Touche' (yet) but my buddy and I installed a bunch of them over the years.  To my knowledge, they are all still working.Dennis C.Touche' 35-1 #83Mandeville, LAOn Tue, Jul 24, 2018 at 6:26 PM, Robert Boyer via CnC-List  wrote:I’ll add a little bit to this discussion...up until this year I was replacing RULE Super Switches every year—sometimes they didn’t even last a year.  I never had a problem with my RULE 1500 bilge pump, just the float switches.  I recently changed over to a float switch made by ULTRA systems and I love it.  It hasn’t been a year yet but it is manufactured so much better than the RULE float switches that I’m sure it will last several years at least.I’ve also replaced my bilge pump wiring and went up one size from the minimum needed to do the job.  All connections are done with heat shrink connectors too.BobBob Boyers/v Rainy DaysC Landfall 38 (Hull # 230)(Presently in Baltimore for the summer)blog: dainyrays.blogspot.comemail: dainyr...@icloud.comOn Jul 24, 2018, at 6:54 PM, Richard via CnC-List  wrote:David, can you provide a few more details? What do you have currently and what quit working? I have bilge pump issues myself and need to do something different with my setup, thanks Sent from my iPhoneOn Jul 24, 2018, at 6:36 PM, David via CnC-List  wrote:





Every friggin year more BS.   So changing out primary to diaghram and secondary (3000+ gph) to a higher quality (not Rule) pump recirculating.




Any brand suggestions?



Thanks in advance.  




Get Outlook for Android




___Thanks everyone for supporting this list with your contributions.  Each and every one is greatly appreciated.  If you want to support the list - use PayPal to send contribution --   https://www.paypal.me/stumurray___Thanks everyone for supporting this list with your contributions.  Each and every one is greatly appreciated.  If you want to support the list - use PayPal to send contribution --   https://www.paypal.me/stumurray___

Thanks everyone for supporting this list with your contributions.  Each and every one is greatly appreciated.  If you want to support the list - use PayPal to send contribution --   https://www.paypal.me/stumurray


___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List I am so done with bilge pumps...

[Dennis C. via CnC-List]

Bob alludes to a critical but often overlooked issue.  Wiring that is too
small to carry the amperage of a user, in this case, a bilge pump, can
result in excessive voltage drop.  Low voltage could contribute to
premature failure.

I second the Ultra Safety Systems bilge pump.  I don't have one on Touche'
(yet) but my buddy and I installed a bunch of them over the years.  To my
knowledge, they are all still working.

Dennis C.
Touche' 35-1 #83
Mandeville, LA

On Tue, Jul 24, 2018 at 6:26 PM, Robert Boyer via CnC-List <
cnc-list@cnc-list.com> wrote:

> I’ll add a little bit to this discussion...up until this year I was
> replacing RULE Super Switches every year—sometimes they didn’t even last a
> year.  I never had a problem with my RULE 1500 bilge pump, just the float
> switches.  I recently changed over to a float switch made by ULTRA systems
> and I love it.  It hasn’t been a year yet but it is manufactured so much
> better than the RULE float switches that I’m sure it will last several
> years at least.
>
> I’ve also replaced my bilge pump wiring and went up one size from the
> minimum needed to do the job.  All connections are done with heat shrink
> connectors too.
>
> Bob
>
> Bob Boyer
> s/v Rainy Days
> C Landfall 38 (Hull # 230)
> (Presently in Baltimore for the summer)
> blog: dainyrays.blogspot.com
> email: dainyr...@icloud.com
>
> On Jul 24, 2018, at 6:54 PM, Richard via CnC-List 
> wrote:
>
> David, can you provide a few more details? What do you have currently and
> what quit working? I have bilge pump issues myself and need to do something
> different with my setup, thanks
>
> Sent from my iPhone
>
> On Jul 24, 2018, at 6:36 PM, David via CnC-List 
> wrote:
>
> Every friggin year more BS.   So changing out primary to diaghram and
> secondary (3000+ gph) to a higher quality (not Rule) pump recirculating.
>
> Any brand suggestions?
>
> Thanks in advance.
>
> Get Outlook for Android
>
> ___
>
> Thanks everyone for supporting this list with your contributions.  Each
> and every one is greatly appreciated.  If you want to support the list -
> use PayPal to send contribution --   https://www.paypal.me/stumurray
>
> ___
>
> Thanks everyone for supporting this list with your contributions.  Each
> and every one is greatly appreciated.  If you want to support the list -
> use PayPal to send contribution --   https://www.paypal.me/stumurray
>
>
> ___
>
> Thanks everyone for supporting this list with your contributions.  Each
> and every one is greatly appreciated.  If you want to support the list -
> use PayPal to send contribution --   https://www.paypal.me/stumurray
>
>
>
___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Stus-List Holy Crap

[Barbara L. Hickson via CnC-List]

Question:  with about this long a boat at 62’ listed, with a shallow draft as 
this one apparently is, would you expect it to sail well to weather?  In my 
limited opinion, I thought the deeper the keel, a fin keel, the better it would 
go. Am I wrong on this?  I sailed and lived aboard a Bowman 47 that had an 8’ 
sweptaway fin keel that sailed like a dream so maybe I’m fixated on that. It 
seems like lots of larger boats have shallow drafts to allow them access to 
shallow water but wouldn’t they be unlikely to sail closer to the wind?  My C 
33 has a 5’6” draft. She sails great to weather, 15-20 degrees off wind 
regularly. What do y’all think?


Sent from Yahoo Mail for iPhone


On Tuesday, July 24, 2018, 4:04 PM, cnc-list-requ...@cnc-list.com wrote:

Send CnC-List mailing list submissions to
    cnc-list@cnc-list.com

To subscribe or unsubscribe via the World Wide Web, visit
    http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
or, via email, send a message with subject or body 'help' to
    cnc-list-requ...@cnc-list.com

You can reach the person managing the list at
    cnc-list-ow...@cnc-list.com

When replying, please edit your Subject line so it is more specific
than "Re: Contents of CnC-List digest..."


Today's Topics:

  1. Re:  Holy Crap... (Bill Coleman)
  2. Re:  Holy Crap... (Joel Aronson)
  3. Re:  Holy Crap... (David)
  4. Re:  Holy Crap... (Chuck Gilchrest)


--

Message: 1
Date: Tue, 24 Jul 2018 15:40:24 -0400
From: "Bill Coleman" 
To: 
Subject: Re: Stus-List Holy Crap...
Message-ID: <263701d42386$2aeb71d0$80c25570$@net>
Content-Type: text/plain; charset="us-ascii"

I'll say. Can't neglect these boats.

Why in the world would they say, "In nice condition"?

 

Bill Coleman

C 39 Erie, PA

 

From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of David via
CnC-List
Sent: Tuesday, July 24, 2018 2:57 PM
To: CNC CNC
Cc: David
Subject: Stus-List Holy Crap...

 

...what a shame.  Must have been a Bruckman one off?

 

https://www.yachtworld.com/boats/1982/C%26C--3232551/Deale/MD/United-States?
refSource=standard%20listing#.W1ZvV7gnaUk


 
<https://www.yachtworld.com/boats/1982/C%26C--3232551/Deale/MD/United-States
?refSource=standard%20listing#.W1ZvV7gnaUk> 

 
<https://www.yachtworld.com/boats/1982/C%26C--3232551/Deale/MD/United-States
?refSource=standard%20listing#.W1ZvV7gnaUk> 1982 C Sail Boat For Sale -
www.yachtworld.com

www.yachtworld.com

1982 C Sail boat for sale, located in Maryland, DEALE

 

 

David F. Risch, J. D.

Gulf Stream Associates, LLC  

(401) 419-4650 

-- next part --
An HTML attachment was scrubbed...
URL: 
<http://cnc-list.com/pipermail/cnc-list_cnc-list.com/attachments/20180724/b2a06d29/attachment-0001.html>

--

Message: 2
Date: Tue, 24 Jul 2018 15:57:25 -0400
From: Joel Aronson 
To: cnc-list 
Subject: Re: Stus-List Holy Crap...
Message-ID:
    
Content-Type: text/plain; charset="utf-8"

Herrington Harbor is a massive marina.  Compared to some of the derelict
boats abandoned there, it is in at least fair condition.  What a shame!

Joel

<http://www.avg.com/email-signature?utm_medium=email_source=link_campaign=sig-email_content=webmail>
Virus-free.
www.avg.com
<http://www.avg.com/email-signature?utm_medium=email_source=link_campaign=sig-email_content=webmail>
<#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>

On Tue, Jul 24, 2018 at 3:40 PM, Bill Coleman via CnC-List <
cnc-list@cnc-list.com> wrote:

> I?ll say. Can?t neglect these boats.
>
> Why in the world would they say, ?In nice condition??
>
>
>
> Bill Coleman
>
> C 39 Erie, PA
>
>
>
> *From:* CnC-List [mailto:cnc-list-boun...@cnc-list.com] *On Behalf Of *David
> via CnC-List
> *Sent:* Tuesday, July 24, 2018 2:57 PM
> *To:* CNC CNC
> *Cc:* David
> *Subject:* Stus-List Holy Crap...
>
>
>
> ...what a shame.  Must have been a Bruckman one off?
>
>
>
> https://www.yachtworld.com/boats/1982/C%26C--3232551/
> Deale/MD/United-States?refSource=standard%20listing#.W1ZvV7gnaUk
>
>
> <https://www.yachtworld.com/boats/1982/C%26C--3232551/Deale/MD/United-States?refSource=standard%20listing#.W1ZvV7gnaUk>
>
> 1982 C Sail Boat For Sale - www.yachtworld.com
> <https://www.yachtworld.com/boats/1982/C%26C--3232551/Deale/MD/United-States?refSource=standard%20listing#.W1ZvV7gnaUk>
>
> www.yachtworld.com
>
> 1982 C Sail boat for sale, located in Maryland, DEALE
>
>
>
>
>
> *David F. Risch, J. D.*
>
> *Gulf Stream Associates, LLC*
>
> *(401) 419-4650 *
>
> ___
>
> Thanks everyone for supporting this list with your contributions.  Each
> and every one is greatly appreciated.  If you want to support

Re: Stus-List Holy Crap...

[Colin Flock via CnC-List]

I can confirm Red Jacket is still at RCYC today and kept in fantastic shape.  

> On Jul 24, 2018, at 8:24 PM, Ken Heaton  wrote:
> 
> Apparently, as of 2016 Red Jacket was still being raced out of the Royal 
> Canadian Yacht Club in Toronto, Ontario.
> 
> http://www.rcryachts.com/news/2016/11/18/cc-yachts-part-one-by-don-finkle
> 
> http://www.cncphotoalbum.com/archive/redjacket/redjacket.htm
> 
> Ken H.
> 
>> On Tue, 24 Jul 2018 at 17:04, Chuck Gilchrest via CnC-List 
>>  wrote:
>> Let’s start with,”where the heck is the mast and the engine?”  And move on 
>> to winches, sails, and pretty much anything of value.
>> 
>> When I bought my first C in Rhode Island, it was in a modest boat yard 
>> right next to Young America, the 1995 America’s Cup defender (unsuccessful). 
>>  This was the boat with the Roy Lichtenstein mermaid painting on the hull.  
>> Being an impressionable sailor and a huge America’s Cup fanatic, I was blown 
>> away to see every bit of deck hardware and parts that weren’t a molded part 
>> of the hull or deck, completely stripped off the boat.  What a tragedy, I 
>> thought!  Why doesn’t somebody preserve this boat as a piece of history?  As 
>> it turns out, the boat was worth more as an art work than as a boat and it 
>> is currently sitting in an outdoor art museum up in the Catskill Mountains 
>> in NY, no keel, not a lick of boat stuff attached…
>> 
>> For someone growing up thinking the America’s Cup was the coolest 
>> competition on the planet, seeing a boat in that condition was as if 
>> somebody was to take James Bond’s Aston Martin DB5 and rip out the engine 
>> and paint it dayglo orange.
>> 
>> At the same time, some boats with serious pedigrees of success have 
>> survived, witness Intrepid, Courageous, Dorade, Gypsy Moth IV and others.  I 
>> wonder what ever happened to Evergreen and Red Jacket?
>> 
>> Chuck Gilchrest
>> 
>> S/V Half Magic
>> 
>> 1983 35 Landfall
>> 
>> Padanaram, MA
>> 
>>  
>> 
>> From: CnC-List  On Behalf Of David via 
>> CnC-List
>> Sent: Tuesday, July 24, 2018 2:57 PM
>> To: CNC CNC 
>> Cc: David 
>> Subject: Stus-List Holy Crap...
>> 
>>  
>> 
>> ...what a shame.   Must have been a Bruckman one off?
>> 
>>  
>> 
>> https://www.yachtworld.com/boats/1982/C%26C--3232551/Deale/MD/United-States?refSource=standard%20listing#.W1ZvV7gnaUk
>> 
>> 
>> 
>> 1982 C Sail Boat For Sale - www.yachtworld.com
>> 
>> www.yachtworld.com
>> 
>> 1982 C Sail boat for sale, located in Maryland, DEALE
>> 
>>  
>> 
>>  
>> 
>> David F. Risch, J. D.
>> 
>> Gulf Stream Associates, LLC 
>> 
>> (401) 419-4650 
>> 
>> ___
>> 
>> Thanks everyone for supporting this list with your contributions.  Each and 
>> every one is greatly appreciated.  If you want to support the list - use 
>> PayPal to send contribution --   https://www.paypal.me/stumurray
>> 
___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List Holy Crap...

[Ken Heaton via CnC-List]

Apparently, as of 2016 Red Jacket was still being raced out of the Royal
Canadian Yacht Club in Toronto, Ontario.

http://www.rcryachts.com/news/2016/11/18/cc-yachts-part-one-by-don-finkle

http://www.cncphotoalbum.com/archive/redjacket/redjacket.htm

Ken H.

On Tue, 24 Jul 2018 at 17:04, Chuck Gilchrest via CnC-List <
cnc-list@cnc-list.com> wrote:

> Let’s start with,”where the heck is the mast and the engine?”  And move on
> to winches, sails, and pretty much anything of value.
>
> When I bought my first C in Rhode Island, it was in a modest boat yard
> right next to Young America, the 1995 America’s Cup defender
> (unsuccessful).  This was the boat with the Roy Lichtenstein mermaid
> painting on the hull.  Being an impressionable sailor and a huge America’s
> Cup fanatic, I was blown away to see every bit of deck hardware and parts
> that weren’t a molded part of the hull or deck, completely stripped off the
> boat.  What a tragedy, I thought!  Why doesn’t somebody preserve this boat
> as a piece of history?  As it turns out, the boat was worth more as an art
> work than as a boat and it is currently sitting in an outdoor art museum up
> in the Catskill Mountains in NY, no keel, not a lick of boat stuff attached…
>
> For someone growing up thinking the America’s Cup was the coolest
> competition on the planet, seeing a boat in that condition was as if
> somebody was to take James Bond’s Aston Martin DB5 and rip out the engine
> and paint it dayglo orange.
>
> At the same time, some boats with serious pedigrees of success have
> survived, witness Intrepid, Courageous, Dorade, Gypsy Moth IV and others.
> I wonder what ever happened to Evergreen and Red Jacket?
>
> Chuck Gilchrest
>
> S/V Half Magic
>
> 1983 35 Landfall
>
> Padanaram, MA
>
>
>
> *From:* CnC-List  *On Behalf Of *David via
> CnC-List
> *Sent:* Tuesday, July 24, 2018 2:57 PM
> *To:* CNC CNC 
> *Cc:* David 
> *Subject:* Stus-List Holy Crap...
>
>
>
> ...what a shame.   Must have been a Bruckman one off?
>
>
>
>
> https://www.yachtworld.com/boats/1982/C%26C--3232551/Deale/MD/United-States?refSource=standard%20listing#.W1ZvV7gnaUk
>
>
> 
>
> 1982 C Sail Boat For Sale - www.yachtworld.com
> 
>
> www.yachtworld.com
>
> 1982 C Sail boat for sale, located in Maryland, DEALE
>
>
>
>
>
> *David F. Risch, J. D.*
>
> *Gulf Stream Associates, LLC*
>
> *(401) 419-4650 *
> ___
>
> Thanks everyone for supporting this list with your contributions.  Each
> and every one is greatly appreciated.  If you want to support the list -
> use PayPal to send contribution --   https://www.paypal.me/stumurray
>
>
___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List I am so done with bilge pumps...

[David via CnC-List]

Rule self contained 1000 primary. Rule 2000 secondary (higher float switch 
with alarm).   Want reliability and capacity.

Get Outlook for Android


From: CnC-List  on behalf of Robert Boyer via 
CnC-List 
Sent: Tuesday, July 24, 2018 7:26:30 PM
To: cnc-list@cnc-list.com
Cc: Robert Boyer
Subject: Re: Stus-List I am so done with bilge pumps...

I’ll add a little bit to this discussion...up until this year I was replacing 
RULE Super Switches every year—sometimes they didn’t even last a year.  I never 
had a problem with my RULE 1500 bilge pump, just the float switches.  I 
recently changed over to a float switch made by ULTRA systems and I love it.  
It hasn’t been a year yet but it is manufactured so much better than the RULE 
float switches that I’m sure it will last several years at least.

I’ve also replaced my bilge pump wiring and went up one size from the minimum 
needed to do the job.  All connections are done with heat shrink connectors too.

Bob

Bob Boyer
s/v Rainy Days
C Landfall 38 (Hull # 230)
(Presently in Baltimore for the summer)
blog: dainyrays.blogspot.com
email: dainyr...@icloud.com

On Jul 24, 2018, at 6:54 PM, Richard via CnC-List 
mailto:cnc-list@cnc-list.com>> wrote:

David, can you provide a few more details? What do you have currently and what 
quit working? I have bilge pump issues myself and need to do something 
different with my setup, thanks

Sent from my iPhone

On Jul 24, 2018, at 6:36 PM, David via CnC-List 
mailto:cnc-list@cnc-list.com>> wrote:

Every friggin year more BS.   So changing out primary to diaghram and secondary 
(3000+ gph) to a higher quality (not Rule) pump recirculating.

Any brand suggestions?

Thanks in advance.

Get Outlook for Android

___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List I am so done with bilge pumps...

[Robert Boyer via CnC-List]

I’ll add a little bit to this discussion...up until this year I was replacing 
RULE Super Switches every year—sometimes they didn’t even last a year.  I never 
had a problem with my RULE 1500 bilge pump, just the float switches.  I 
recently changed over to a float switch made by ULTRA systems and I love it.  
It hasn’t been a year yet but it is manufactured so much better than the RULE 
float switches that I’m sure it will last several years at least.

I’ve also replaced my bilge pump wiring and went up one size from the minimum 
needed to do the job.  All connections are done with heat shrink connectors too.

Bob

Bob Boyer
s/v Rainy Days
C Landfall 38 (Hull # 230)
(Presently in Baltimore for the summer)
blog: dainyrays.blogspot.com
email: dainyr...@icloud.com

> On Jul 24, 2018, at 6:54 PM, Richard via CnC-List  
> wrote:
> 
> David, can you provide a few more details? What do you have currently and 
> what quit working? I have bilge pump issues myself and need to do something 
> different with my setup, thanks 
> 
> Sent from my iPhone
> 
>> On Jul 24, 2018, at 6:36 PM, David via CnC-List  
>> wrote:
>> 
>> Every friggin year more BS.   So changing out primary to diaghram and 
>> secondary (3000+ gph) to a higher quality (not Rule) pump recirculating. 
>> 
>> Any brand suggestions?
>> 
>> Thanks in advance.  
>> 
>> Get Outlook for Android
>> 
>> ___
>> 
>> Thanks everyone for supporting this list with your contributions.  Each and 
>> every one is greatly appreciated.  If you want to support the list - use 
>> PayPal to send contribution --   https://www.paypal.me/stumurray
>> 
> ___
> 
> Thanks everyone for supporting this list with your contributions.  Each and 
> every one is greatly appreciated.  If you want to support the list - use 
> PayPal to send contribution --   https://www.paypal.me/stumurray
> 
___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List I am so done with bilge pumps...

[Richard via CnC-List]

David, can you provide a few more details? What do you have currently and what 
quit working? I have bilge pump issues myself and need to do something 
different with my setup, thanks 

Sent from my iPhone

> On Jul 24, 2018, at 6:36 PM, David via CnC-List  wrote:
> 
> Every friggin year more BS.   So changing out primary to diaghram and 
> secondary (3000+ gph) to a higher quality (not Rule) pump recirculating. 
> 
> Any brand suggestions?
> 
> Thanks in advance.  
> 
> Get Outlook for Android
> 
> ___
> 
> Thanks everyone for supporting this list with your contributions.  Each and 
> every one is greatly appreciated.  If you want to support the list - use 
> PayPal to send contribution --   https://www.paypal.me/stumurray
> 
___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Stus-List I am so done with bilge pumps...

[David via CnC-List]

Every friggin year more BS.   So changing out primary to diaghram and secondary 
(3000+ gph) to a higher quality (not Rule) pump recirculating.

Any brand suggestions?

Thanks in advance.

Get Outlook for Android

___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Stus-List Performance Tees

[Colin A. Flock via CnC-List]

With the all of the threads on the great shirts from Maritime Tees I did
not see any comments on the Performance Tees he offers.  We have a new (to
us) C 29-2 and there was only a C 29 on the site so he made up new ones
for us very quickly.

Received them today, one long sleeve and one short but both performance,
they are a 65/35 poly/cotton blend so soft and fit well.  I am 6 foot and
average build, the large is perfect.  My wife got the long sleeve in small,
she is normally a medium in women's petite and 5'3".

Have not washed them yet but suspect with the blend they will not shrink.

Great service will likely order again.

Colin
C 29 Toronto, ON
___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List 2018 C Northeast Rendezvous -- Go or No Go?

[John via CnC-List]

Olivia Grace is confirmed. What do I need to do. 

Sent from my iPhone

> On Jul 24, 2018, at 5:23 PM, Edd Schillay via CnC-List 
>  wrote:
> 
> John,
> 
> If Olivia Grace confirms and Destrier confirms, I’ll keep it going. 4 boats 
> will be a good base and hopefully there will be more. 
> 
> All the best,
> 
> Edd
> 
> 
> Edd M. Schillay
> Starship Enterprise
> C 37+ | Sail No: NCC-1701-B
> City Island, NY 
> Starship Enterprise's Captain's Log
> 
> 
> 
>   
> 
> 
> 
> 
> On Jul 24, 2018, at 5:20 PM, John via CnC-List  wrote:
> 
> I am the owner of Olivia Grace. She is a Landfall 38 that just went though a 
> complete refit. This was going to be her coming out party. Please let me know 
> if the the Rondezvous is happening or not. We hope it will not be canceled. 
> 
> Sent from my iPhone
> 
>> On Jul 24, 2018, at 4:53 PM, Cleverboy via CnC-List  
>> wrote:
>> 
>> Hello Edd
>> 
>> I have questions about the rendezvous. This would be the first for me. My 
>> wife, son and daughter-in-law would like to drive out to see us at the 
>> rendezvous. How would that be considered? There would be three of us staying 
>> on the boat. 
>> 
>> Charles Ferrari
>> Destrier
>> C 30 mk1
>> Evers Marina, Bronx, NY
>> From: CnC-List  on behalf of David via 
>> CnC-List 
>> Sent: Monday, July 23, 2018 10:16 PM
>> To: cnc-list@cnc-list.com
>> Cc: David
>> Subject: Re: Stus-List 2018 C Northeast Rendezvous -- Go or No Go?
>>  
>> Actually.   Did sleep with bride.   Still getting married.   Telling that...
>> 
>> Get Outlook for Android
>> 
>> From: CnC-List  on behalf of JP Mail via 
>> CnC-List 
>> Sent: Monday, July 23, 2018 4:56:05 PM
>> To: cnc-list@cnc-list.com
>> Cc: JP Mail
>> Subject: Re: Stus-List 2018 C Northeast Rendezvous -- Go or No Go?
>>  
>> Yes, not looking so good for me either. I’m determined to keep Hideaway on 
>> the Sound next year though. It will make LIS and parts east accessible. 
>> J
>> 
>> Sent from my iPhone
>> 
>> On Jul 23, 2018, at 1:45 PM, Edd Schillay via CnC-List 
>>  wrote:
>> 
>>> Listers,
>>> 
>>> With the 2018 C Northeast Rendezvous in Milford (www.cncnortheast.com) 
>>> just over a month away, I am contemplating cancelling the event this year…. 
>>> 
>>> So far, from the regulars:
>>> Hanuman is sold. 
>>> Aries is damaged.
>>> David Risch (Corsair) has to go to a wedding that weekend and refuses to 
>>> sleep with the bride (or even the groom) to break up the wedding. 
>>> No word yet from others . . . 
>>> 
>>> I’ll keep the registration open for another two weeks, but without boats 
>>> attending, I’d rather not be on the hook for restaurant and marina holds. 
>>> 
>>> Hope to get some C together this year, but, if not, we’ll plan something 
>>> big for 2019.  
>>> 
>>> All the best,
>>> 
>>> Edd
>>> 
>>> 
>>> Edd M. Schillay
>>> Starship Enterprise
>>> C 37+ | Sail No: NCC-1701-B
>>> City Island, NY 
>>> Starship Enterprise's Captain's Log
>>> 
>>> 
>>> 
>>> 
>>> 
>>> 
>>> 
>>> 
>>> 
>>> 
>>> 
>>> ___
>>> 
>>> Thanks everyone for supporting this list with your contributions.  Each and 
>>> every one is greatly appreciated.  If you want to support the list - use 
>>> PayPal to send contribution --   https://www.paypal.me/stumurray
>>> 
>> ___
>> 
>> Thanks everyone for supporting this list with your contributions.  Each and 
>> every one is greatly appreciated.  If you want to support the list - use 
>> PayPal to send contribution --   https://www.paypal.me/stumurray
>> 
> ___
> 
> Thanks everyone for supporting this list with your contributions.  Each and 
> every one is greatly appreciated.  If you want to support the list - use 
> PayPal to send contribution --   https://www.paypal.me/stumurray
> 
> 
> ___
> 
> Thanks everyone for supporting this list with your contributions.  Each and 
> every one is greatly appreciated.  If you want to support the list - use 
> PayPal to send contribution --   https://www.paypal.me/stumurray
> 
___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List 2018 C Northeast Rendezvous -- Go or No Go?

[Edd Schillay via CnC-List]

John,

If Olivia Grace confirms and Destrier confirms, I’ll keep it going. 4 boats 
will be a good base and hopefully there will be more. 

All the best,

Edd


Edd M. Schillay
Starship Enterprise
C 37+ | Sail No: NCC-1701-B
City Island, NY 
Starship Enterprise's Captain's Log 








On Jul 24, 2018, at 5:20 PM, John via CnC-List  wrote:

I am the owner of Olivia Grace. She is a Landfall 38 that just went though a 
complete refit. This was going to be her coming out party. Please let me know 
if the the Rondezvous is happening or not. We hope it will not be canceled. 

Sent from my iPhone

On Jul 24, 2018, at 4:53 PM, Cleverboy via CnC-List mailto:cnc-list@cnc-list.com>> wrote:

> Hello Edd
> 
> I have questions about the rendezvous. This would be the first for me. My 
> wife, son and daughter-in-law would like to drive out to see us at the 
> rendezvous. How would that be considered? There would be three of us staying 
> on the boat. 
> 
> Charles Ferrari
> Destrier
> C 30 mk1
> Evers Marina, Bronx, NY
> From: CnC-List  > on behalf of David via CnC-List 
> mailto:cnc-list@cnc-list.com>>
> Sent: Monday, July 23, 2018 10:16 PM
> To: cnc-list@cnc-list.com 
> Cc: David
> Subject: Re: Stus-List 2018 C Northeast Rendezvous -- Go or No Go?
>  
> Actually.   Did sleep with bride.   Still getting married.   Telling that...
> 
> Get Outlook for Android
> 
> From: CnC-List  > on behalf of JP Mail via CnC-List 
> mailto:cnc-list@cnc-list.com>>
> Sent: Monday, July 23, 2018 4:56:05 PM
> To: cnc-list@cnc-list.com 
> Cc: JP Mail
> Subject: Re: Stus-List 2018 C Northeast Rendezvous -- Go or No Go?
>  
> Yes, not looking so good for me either. I’m determined to keep Hideaway on 
> the Sound next year though. It will make LIS and parts east accessible. 
> J
> 
> Sent from my iPhone
> 
> On Jul 23, 2018, at 1:45 PM, Edd Schillay via CnC-List  > wrote:
> 
>> Listers,
>> 
>> With the 2018 C Northeast Rendezvous in Milford (www.cncnortheast.com 
>> ) just over a month away, I am contemplating 
>> cancelling the event this year…. 
>> 
>> So far, from the regulars:
>> Hanuman is sold. 
>> Aries is damaged.
>> David Risch (Corsair) has to go to a wedding that weekend and refuses to 
>> sleep with the bride (or even the groom) to break up the wedding. 
>> No word yet from others . . . 
>> 
>> I’ll keep the registration open for another two weeks, but without boats 
>> attending, I’d rather not be on the hook for restaurant and marina holds. 
>> 
>> Hope to get some C together this year, but, if not, we’ll plan something 
>> big for 2019.  
>> 
>> All the best,
>> 
>> Edd
>> 
>> 
>> Edd M. Schillay
>> Starship Enterprise
>> C 37+ | Sail No: NCC-1701-B
>> City Island, NY 
>> Starship Enterprise's Captain's Log 
>> 
>> 
>> 
>> 
>> 
>> 
>> 
>> 
>> 
>> 
>> 
>> ___
>> 
>> Thanks everyone for supporting this list with your contributions.  Each and 
>> every one is greatly appreciated.  If you want to support the list - use 
>> PayPal to send contribution --   https://www.paypal.me/stumurray 
>> 
>> 
> ___
> 
> Thanks everyone for supporting this list with your contributions.  Each and 
> every one is greatly appreciated.  If you want to support the list - use 
> PayPal to send contribution --   https://www.paypal.me/stumurray 
> 
> 
___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray


___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List 2018 C Northeast Rendezvous -- Go or No Go?

[John via CnC-List]

I am the owner of Olivia Grace. She is a Landfall 38 that just went though a 
complete refit. This was going to be her coming out party. Please let me know 
if the the Rondezvous is happening or not. We hope it will not be canceled. 

Sent from my iPhone

> On Jul 24, 2018, at 4:53 PM, Cleverboy via CnC-List  
> wrote:
> 
> Hello Edd
> 
> I have questions about the rendezvous. This would be the first for me. My 
> wife, son and daughter-in-law would like to drive out to see us at the 
> rendezvous. How would that be considered? There would be three of us staying 
> on the boat. 
> 
> Charles Ferrari
> Destrier
> C 30 mk1
> Evers Marina, Bronx, NY
> From: CnC-List  on behalf of David via 
> CnC-List 
> Sent: Monday, July 23, 2018 10:16 PM
> To: cnc-list@cnc-list.com
> Cc: David
> Subject: Re: Stus-List 2018 C Northeast Rendezvous -- Go or No Go?
>  
> Actually.   Did sleep with bride.   Still getting married.   Telling that...
> 
> Get Outlook for Android
> 
> From: CnC-List  on behalf of JP Mail via 
> CnC-List 
> Sent: Monday, July 23, 2018 4:56:05 PM
> To: cnc-list@cnc-list.com
> Cc: JP Mail
> Subject: Re: Stus-List 2018 C Northeast Rendezvous -- Go or No Go?
>  
> Yes, not looking so good for me either. I’m determined to keep Hideaway on 
> the Sound next year though. It will make LIS and parts east accessible. 
> J
> 
> Sent from my iPhone
> 
> On Jul 23, 2018, at 1:45 PM, Edd Schillay via CnC-List 
>  wrote:
> 
>> Listers,
>> 
>> With the 2018 C Northeast Rendezvous in Milford (www.cncnortheast.com) 
>> just over a month away, I am contemplating cancelling the event this year…. 
>> 
>> So far, from the regulars:
>> Hanuman is sold. 
>> Aries is damaged.
>> David Risch (Corsair) has to go to a wedding that weekend and refuses to 
>> sleep with the bride (or even the groom) to break up the wedding. 
>> No word yet from others . . . 
>> 
>> I’ll keep the registration open for another two weeks, but without boats 
>> attending, I’d rather not be on the hook for restaurant and marina holds. 
>> 
>> Hope to get some C together this year, but, if not, we’ll plan something 
>> big for 2019.  
>> 
>> All the best,
>> 
>> Edd
>> 
>> 
>> Edd M. Schillay
>> Starship Enterprise
>> C 37+ | Sail No: NCC-1701-B
>> City Island, NY 
>> Starship Enterprise's Captain's Log
>> 
>> 
>> 
>> 
>> 
>> 
>> 
>> 
>> 
>> 
>> 
>> ___
>> 
>> Thanks everyone for supporting this list with your contributions.  Each and 
>> every one is greatly appreciated.  If you want to support the list - use 
>> PayPal to send contribution --   https://www.paypal.me/stumurray
>> 
> ___
> 
> Thanks everyone for supporting this list with your contributions.  Each and 
> every one is greatly appreciated.  If you want to support the list - use 
> PayPal to send contribution --   https://www.paypal.me/stumurray
> 
___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List 2018 C Northeast Rendezvous -- Go or No Go?

[Edd Schillay via CnC-List]

Charles,

The per-person charge is all based on an appetizer package at the restaurant on 
Saturday night — so if they want to do the dinner thing, they would be added. 

Let me know. . . . 

Two boats now — we’re on life support, but it may work out. 

All the best,

Edd


Edd M. Schillay
Starship Enterprise
C 37+ | Sail No: NCC-1701-B
City Island, NY 
Starship Enterprise's Captain's Log 





On Jul 24, 2018, at 4:53 PM, Cleverboy via CnC-List  
wrote:

Hello Edd

I have questions about the rendezvous. This would be the first for me. My wife, 
son and daughter-in-law would like to drive out to see us at the rendezvous. 
How would that be considered? There would be three of us staying on the boat. 

Charles Ferrari
Destrier
C 30 mk1
Evers Marina, Bronx, NY
From: CnC-List mailto:cnc-list-boun...@cnc-list.com>> on behalf of David via CnC-List 
mailto:cnc-list@cnc-list.com>>
Sent: Monday, July 23, 2018 10:16 PM
To: cnc-list@cnc-list.com 
Cc: David
Subject: Re: Stus-List 2018 C Northeast Rendezvous -- Go or No Go?
 
Actually.   Did sleep with bride.   Still getting married.   Telling that...

Get Outlook for Android

From: CnC-List mailto:cnc-list-boun...@cnc-list.com>> on behalf of JP Mail via CnC-List 
mailto:cnc-list@cnc-list.com>>
Sent: Monday, July 23, 2018 4:56:05 PM
To: cnc-list@cnc-list.com 
Cc: JP Mail
Subject: Re: Stus-List 2018 C Northeast Rendezvous -- Go or No Go?
 
Yes, not looking so good for me either. I’m determined to keep Hideaway on the 
Sound next year though. It will make LIS and parts east accessible. 
J

Sent from my iPhone

On Jul 23, 2018, at 1:45 PM, Edd Schillay via CnC-List mailto:cnc-list@cnc-list.com>> wrote:

> Listers,
> 
> With the 2018 C Northeast Rendezvous in Milford (www.cncnortheast.com 
> ) just over a month away, I am contemplating 
> cancelling the event this year…. 
> 
> So far, from the regulars:
> Hanuman is sold. 
> Aries is damaged.
> David Risch (Corsair) has to go to a wedding that weekend and refuses to 
> sleep with the bride (or even the groom) to break up the wedding. 
> No word yet from others . . . 
> 
> I’ll keep the registration open for another two weeks, but without boats 
> attending, I’d rather not be on the hook for restaurant and marina holds. 
> 
> Hope to get some C together this year, but, if not, we’ll plan something 
> big for 2019.  
> 
> All the best,
> 
> Edd
> 
> 
> Edd M. Schillay
> Starship Enterprise
> C 37+ | Sail No: NCC-1701-B
> City Island, NY 
> Starship Enterprise's Captain's Log 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> ___
> 
> Thanks everyone for supporting this list with your contributions.  Each and 
> every one is greatly appreciated.  If you want to support the list - use 
> PayPal to send contribution --   https://www.paypal.me/stumurray 
> 
> 
___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray 

___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List 2018 C Northeast Rendezvous -- Go or No Go?

[Cleverboy via CnC-List]

Hello Edd

I have questions about the rendezvous. This would be the first for me. My wife, 
son and daughter-in-law would like to drive out to see us at the rendezvous. 
How would that be considered? There would be three of us staying on the boat.

Charles Ferrari
Destrier
C 30 mk1
Evers Marina, Bronx, NY

From: CnC-List  on behalf of David via CnC-List 

Sent: Monday, July 23, 2018 10:16 PM
To: cnc-list@cnc-list.com
Cc: David
Subject: Re: Stus-List 2018 C Northeast Rendezvous -- Go or No Go?

Actually.   Did sleep with bride.   Still getting married.   Telling that...

Get Outlook for Android


From: CnC-List  on behalf of JP Mail via 
CnC-List 
Sent: Monday, July 23, 2018 4:56:05 PM
To: cnc-list@cnc-list.com
Cc: JP Mail
Subject: Re: Stus-List 2018 C Northeast Rendezvous -- Go or No Go?

Yes, not looking so good for me either. I’m determined to keep Hideaway on the 
Sound next year though. It will make LIS and parts east accessible.
J

Sent from my iPhone

On Jul 23, 2018, at 1:45 PM, Edd Schillay via CnC-List 
mailto:cnc-list@cnc-list.com>> wrote:

Listers,

With the 2018 C Northeast Rendezvous in Milford 
(www.cncnortheast.com) just over a month away, I 
am contemplating cancelling the event this year….

So far, from the regulars:

  *   Hanuman is sold.
  *   Aries is damaged.
  *   David Risch (Corsair) has to go to a wedding that weekend and refuses to 
sleep with the bride (or even the groom) to break up the wedding.

No word yet from others . . .

I’ll keep the registration open for another two weeks, but without boats 
attending, I’d rather not be on the hook for restaurant and marina holds.

Hope to get some C together this year, but, if not, we’ll plan something big 
for 2019.

All the best,

Edd


Edd M. Schillay
Starship Enterprise
C 37+ | Sail No: NCC-1701-B
City Island, NY
Starship Enterprise's Captain's Log








___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Stus-List Holy Crap

[Francois Rivard via CnC-List]

Hey, Nothing that about $200,000.00 and 2+ years of solid work wouldn't
fix..

https://www.yachtworld.com/boats/1982/C%26C--3232551/Deale/MD/United-States?
refSource=standard%20listing#.W1ZvV7gnaUk

-Francois
1990 34+ "Take Five"
Lake Lanier, GA
___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List Holy Crap...

[Chuck Gilchrest via CnC-List]

Let's start with,"where the heck is the mast and the engine?"  And move on
to winches, sails, and pretty much anything of value.

When I bought my first C in Rhode Island, it was in a modest boat yard
right next to Young America, the 1995 America's Cup defender (unsuccessful).
This was the boat with the Roy Lichtenstein mermaid painting on the hull.
Being an impressionable sailor and a huge America's Cup fanatic, I was blown
away to see every bit of deck hardware and parts that weren't a molded part
of the hull or deck, completely stripped off the boat.  What a tragedy, I
thought!  Why doesn't somebody preserve this boat as a piece of history?  As
it turns out, the boat was worth more as an art work than as a boat and it
is currently sitting in an outdoor art museum up in the Catskill Mountains
in NY, no keel, not a lick of boat stuff attached.

For someone growing up thinking the America's Cup was the coolest
competition on the planet, seeing a boat in that condition was as if
somebody was to take James Bond's Aston Martin DB5 and rip out the engine
and paint it dayglo orange.

At the same time, some boats with serious pedigrees of success have
survived, witness Intrepid, Courageous, Dorade, Gypsy Moth IV and others.  I
wonder what ever happened to Evergreen and Red Jacket?

Chuck Gilchrest

S/V Half Magic

1983 35 Landfall

Padanaram, MA

 

From: CnC-List  On Behalf Of David via
CnC-List
Sent: Tuesday, July 24, 2018 2:57 PM
To: CNC CNC 
Cc: David 
Subject: Stus-List Holy Crap...

 

...what a shame.   Must have been a Bruckman one off?

 

https://www.yachtworld.com/boats/1982/C%26C--3232551/Deale/MD/United-States?
refSource=standard%20listing#.W1ZvV7gnaUk


 
 

 
 1982 C Sail Boat For Sale -
www.yachtworld.com

www.yachtworld.com  

1982 C Sail boat for sale, located in Maryland, DEALE

 

 

David F. Risch, J. D.

Gulf Stream Associates, LLC  

(401) 419-4650 

___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List Holy Crap...

[David via CnC-List]

If it has not been sunk...h.


David F. Risch, J. D.

Gulf Stream Associates, LLC

(401) 419-4650



From: CnC-List  on behalf of Joel Aronson via 
CnC-List 
Sent: Tuesday, July 24, 2018 3:57 PM
To: cnc-list
Cc: Joel Aronson
Subject: Re: Stus-List Holy Crap...

Herrington Harbor is a massive marina.  Compared to some of the derelict boats 
abandoned there, it is in at least fair condition.  What a shame!

Joel

[https://ipmcdn.avast.com/images/icons/icon-envelope-tick-green-avg-v1.png]
 Virus-free. 
www.avg.com

On Tue, Jul 24, 2018 at 3:40 PM, Bill Coleman via CnC-List 
mailto:cnc-list@cnc-list.com>> wrote:

I’ll say. Can’t neglect these boats.

Why in the world would they say, “In nice condition”?



Bill Coleman

C 39 Erie, PA



From: CnC-List 
[mailto:cnc-list-boun...@cnc-list.com] On 
Behalf Of David via CnC-List
Sent: Tuesday, July 24, 2018 2:57 PM
To: CNC CNC
Cc: David
Subject: Stus-List Holy Crap...



...what a shame.   Must have been a Bruckman one off?



https://www.yachtworld.com/boats/1982/C%26C--3232551/Deale/MD/United-States?refSource=standard%20listing#.W1ZvV7gnaUk

[https://newimages.yachtworld.com/resize/1/76/62/5927662_20180723121725123_1_XLARGE.jpg?f=/1/76/62/5927662_20180723121725123_1_XLARGE.jpg=250=140=1532377147000]


1982 C Sail Boat For Sale - 
www.yachtworld.com

www.yachtworld.com

1982 C Sail boat for sale, located in Maryland, DEALE






David F. Risch, J. D.

Gulf Stream Associates, LLC

(401) 419-4650

___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray





--
Joel
301 541 8551
___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List Holy Crap...

[Joel Aronson via CnC-List]

Herrington Harbor is a massive marina.  Compared to some of the derelict
boats abandoned there, it is in at least fair condition.  What a shame!

Joel


Virus-free.
www.avg.com

<#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>

On Tue, Jul 24, 2018 at 3:40 PM, Bill Coleman via CnC-List <
cnc-list@cnc-list.com> wrote:

> I’ll say. Can’t neglect these boats.
>
> Why in the world would they say, “In nice condition”?
>
>
>
> Bill Coleman
>
> C 39 Erie, PA
>
>
>
> *From:* CnC-List [mailto:cnc-list-boun...@cnc-list.com] *On Behalf Of *David
> via CnC-List
> *Sent:* Tuesday, July 24, 2018 2:57 PM
> *To:* CNC CNC
> *Cc:* David
> *Subject:* Stus-List Holy Crap...
>
>
>
> ...what a shame.   Must have been a Bruckman one off?
>
>
>
> https://www.yachtworld.com/boats/1982/C%26C--3232551/
> Deale/MD/United-States?refSource=standard%20listing#.W1ZvV7gnaUk
>
>
> 
>
> 1982 C Sail Boat For Sale - www.yachtworld.com
> 
>
> www.yachtworld.com
>
> 1982 C Sail boat for sale, located in Maryland, DEALE
>
>
>
>
>
> *David F. Risch, J. D.*
>
> *Gulf Stream Associates, LLC*
>
> *(401) 419-4650 *
>
> ___
>
> Thanks everyone for supporting this list with your contributions.  Each
> and every one is greatly appreciated.  If you want to support the list -
> use PayPal to send contribution --   https://www.paypal.me/stumurray
>
>
>


-- 
Joel
301 541 8551
___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List Holy Crap...

[Bill Coleman via CnC-List]

I'll say. Can't neglect these boats.

Why in the world would they say, "In nice condition"?

 

Bill Coleman

C 39 Erie, PA

 

From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of David via
CnC-List
Sent: Tuesday, July 24, 2018 2:57 PM
To: CNC CNC
Cc: David
Subject: Stus-List Holy Crap...

 

...what a shame.   Must have been a Bruckman one off?

 

https://www.yachtworld.com/boats/1982/C%26C--3232551/Deale/MD/United-States?
refSource=standard%20listing#.W1ZvV7gnaUk


 
 

 
 1982 C Sail Boat For Sale -
www.yachtworld.com

www.yachtworld.com

1982 C Sail boat for sale, located in Maryland, DEALE

 

 

David F. Risch, J. D.

Gulf Stream Associates, LLC  

(401) 419-4650 

___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List Holy Crap...

[Randy Stafford via CnC-List]

That is a shame.  I like how the Yacht World ad text says “in nice condition”.

Cheers,
Randy

> On Jul 24, 2018, at 12:57 PM, David via CnC-List  
> wrote:
> 
> ...what a shame.   Must have been a Bruckman one off?
> 
> https://www.yachtworld.com/boats/1982/C%26C--3232551/Deale/MD/United-States?refSource=standard%20listing#.W1ZvV7gnaUk
>  
> 
>  
> 
>   
> 1982 C Sail Boat For Sale - www.yachtworld.com 
> 
> www.yachtworld.com 
> 1982 C Sail boat for sale, located in Maryland, DEALE
> 
> 
> David F. Risch, J. D.
> Gulf Stream Associates, LLC  
> (401) 419-4650 
> ___
> 
> Thanks everyone for supporting this list with your contributions.  Each and 
> every one is greatly appreciated.  If you want to support the list - use 
> PayPal to send contribution --   https://www.paypal.me/stumurray 
> 
___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Stus-List Holy Crap...

[David via CnC-List]

...what a shame.   Must have been a Bruckman one off?


https://www.yachtworld.com/boats/1982/C%26C--3232551/Deale/MD/United-States?refSource=standard%20listing#.W1ZvV7gnaUk

[https://newimages.yachtworld.com/resize/1/76/62/5927662_20180723121725123_1_XLARGE.jpg?f=/1/76/62/5927662_20180723121725123_1_XLARGE.jpg=250=140=1532377147000]

1982 C Sail Boat For Sale - 
www.yachtworld.com
www.yachtworld.com
1982 C Sail boat for sale, located in Maryland, DEALE




David F. Risch, J. D.

Gulf Stream Associates, LLC

(401) 419-4650
___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Stus-List Structural Glass Work

[Len Mitchell via CnC-List]

If you are having issues finding a copy, I use AbeBooks.com, they are a used 
book site and you can find out of circulation books by searching the name or 
author. You will be able to have a copy mailed to you for around 10 USD. Just 
pick the one in the best condition or maybe if you are lucky the seller is in 
your city. 

Len

Sent from my iPad
___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List Structural glass work

[bushmark4--- via CnC-List]

 Don thanks, I'm on it!

 


Richard

Richard N. Bush Law Offices 
2950 Breckenridge Lane, Suite Nine
Louisville, Kentucky 40220-1462 
502-584-7255

 

 

-Original Message-
From: Donald Sebastian via CnC-List 
To: cnc-list 
Cc: Donald Sebastian 
Sent: Tue, Jul 24, 2018 11:47 am
Subject: Re: Stus-List Structural glass work


Hey Richard,


https://www.amazon.com/Fiberglass-Boat-Repair-Manual/dp/0071569146/ref=sr_1_1?ie=UTF8=1532447102=8-1=The+Fiberglass+Boat+Repair+Manual






Donald







On Jul 24, 2018, at 11:40 AM, bushmark4--- via CnC-List  
wrote:


 Paul, thanksI hadn't noticed that, if I switch it over to .com I should be 
OK; Thanks again!

 


Richard

Richard N. Bush Law Offices 
2950 Breckenridge Lane, Suite Nine
Louisville, Kentucky 40220-1462 
502-584-7255

 

 

-Original Message-
From: Paul Fountain via CnC-List 
To: cnc-list 
Cc: Paul Fountain 
Sent: Tue, Jul 24, 2018 11:19 am
Subject: Re: Stus-List Structural glass work




Think it’s because the link is to amazon.ca not amazon.com.







Paul

 
From: 30031472000n behalf of
Sent: Tuesday, July 24, 2018 11:07 AM
To: cnc-list@cnc-list.com
Cc: bushma...@aol.com
Subject: Re: Stus-List Structural glass work
 

OK this is weird: I tried to order the Fiberglass manual book and Amazon wont 
deliver it to my address!  Does it have something to do with it being published 
in Canada? Does anyone understand this?   Any suggestions on how to get it 
delivered?




Richard
s/v Bushmark4; 1985 C 37 CB; Ohio River, Mile 584
Richard N. Bush 
2950 Breckenridge Lane, Suite Nine
Louisville, Kentucky 40220-1462 
502-584-7255





-Original Message-
From: Sylvain Laplante via CnC-List 
To: C List 
Cc: Sylvain Laplante 
Sent: Tue, Jul 24, 2018 10:57 am
Subject: Re: Stus-List Structural glass work





Hi,

  I read many, and teh Gougeon brothers manuals. By far I would recommend " The 
fiberglass boat repair manual " by Allan H Vaitses , excellent knowledge with 
real life experience and very objective in the subjects covered. He built 
boats, fixed other's mistakes and is a pleasure to read from page one to the 
end. Look at the cover and you can see the extend of knowledge described in 
this book.



https://www.amazon.ca/Fiberglass-Boat-Repair-Manual/dp/0071569146


No, my copy is not for sale!



Sylvain
C MkIII








On Monday, July 23, 2018, 9:22:07 PM EDT, Brent Driedger via CnC-List 
 wrote:





Hi folks.  

I’ve worked with fibreglass for years and have pretty much memorized the West 
epoxy how-to book. I want to learn more about engineering the reinforcements 
and repairs I’m doing.  Can anyone in the know recommend a good text book on 
the subject of marine composites which goes into more depth than your typical 
toilet tank page flipper. 

Thanks. 



Brent Driedger 

s/v Wild Rover

27-5

Lake Winnipeg. 



Sent from my iPhone



___



Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution -- https://www.paypal.me/stumurray






___

Thanks everyone for supporting this list with your contributions. Each and 
every one is greatly appreciated. If you want to support the list - use PayPal 
to send contribution --https://www.paypal.me/stumurray



___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray


___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray






___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray


___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List Structural glass work

[Sylvain Laplante via CnC-List]

 Enjoy! I read it a few times over the years :-)


On Tuesday, July 24, 2018, 11:46:17 AM EDT, bushma...@aol.com 
 wrote:  
 
  Thanks to Paul, I have ordered a copy of the book! 
 
Richards/v Bushmark4; 1985 C 37 CB; Ohio River, Mile 584.4

Richard N. Bush 
2950 Breckenridge Lane, Suite Nine
Louisville, Kentucky 40220-1462 
502-584-7255 
 
-Original Message-
From: Sylvain Laplante via CnC-List 
To: C List 
Cc: Sylvain Laplante 
Sent: Tue, Jul 24, 2018 10:57 am
Subject: Re: Stus-List Structural glass work

 Hi,
  I read many, and teh Gougeon brothers manuals. By far I would recommend " The 
fiberglass boat repair manual " by Allan H Vaitses , excellent knowledge with 
real life experience and very objective in the subjects covered. He built 
boats, fixed other's mistakes and is a pleasure to read from page one to the 
end. Look at the cover and you can see the extend of knowledge described in 
this book.

https://www.amazon.ca/Fiberglass-Boat-Repair-Manual/dp/0071569146

No, my copy is not for sale!

Sylvain
C MkIII

On Monday, July 23, 2018, 9:22:07 PM EDT, Brent Driedger via CnC-List 
 wrote:  
 
 Hi folks.  
I’ve worked with fibreglass for years and have pretty much memorized the West 
epoxy how-to book. I want to learn more about engineering the reinforcements 
and repairs I’m doing.  Can anyone in the know recommend a good text book on 
the subject of marine composites which goes into more depth than your typical 
toilet tank page flipper.  
Thanks. 

Brent Driedger 
s/v Wild Rover
27-5
Lake Winnipeg. 

Sent from my iPhone

___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --  https://www.paypal.me/stumurray

  ___

Thanks everyone for supporting this list with your contributions. Each and 
every one is greatly appreciated. If you want to support the list - use PayPal 
to send contribution -- https://www.paypal.me/stumurray

  ___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List Structural glass work

[bushmark4--- via CnC-List]

 Thanks to Paul, I have ordered a copy of the book! 

 


Richard
s/v Bushmark4; 1985 C 37 CB; Ohio River, Mile 584.4


Richard N. Bush 
2950 Breckenridge Lane, Suite Nine
Louisville, Kentucky 40220-1462 
502-584-7255

 

 

-Original Message-
From: Sylvain Laplante via CnC-List 
To: C List 
Cc: Sylvain Laplante 
Sent: Tue, Jul 24, 2018 10:57 am
Subject: Re: Stus-List Structural glass work





Hi,

  I read many, and teh Gougeon brothers manuals. By far I would recommend " The 
fiberglass boat repair manual " by Allan H Vaitses , excellent knowledge with 
real life experience and very objective in the subjects covered. He built 
boats, fixed other's mistakes and is a pleasure to read from page one to the 
end. Look at the cover and you can see the extend of knowledge described in 
this book.



https://www.amazon.ca/Fiberglass-Boat-Repair-Manual/dp/0071569146


No, my copy is not for sale!



Sylvain
C MkIII









On Monday, July 23, 2018, 9:22:07 PM EDT, Brent Driedger 
via CnC-List  wrote:







Hi folks.  

I’ve worked with fibreglass for years and have pretty much memorized the West 
epoxy how-to book. I want to learn more about engineering the reinforcements 
and repairs I’m doing.  Can anyone in the know recommend a good text book on 
the subject of marine composites which goes into more depth than your typical 
toilet tank page flipper.  

Thanks. 



Brent Driedger 

s/v Wild Rover

27-5

Lake Winnipeg. 



Sent from my iPhone



___



Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray






___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray


___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List Structural glass work

[Donald Sebastian via CnC-List]

Hey Richard,

https://www.amazon.com/Fiberglass-Boat-Repair-Manual/dp/0071569146/ref=sr_1_1?ie=UTF8=1532447102=8-1=The+Fiberglass+Boat+Repair+Manual



Donald



> On Jul 24, 2018, at 11:40 AM, bushmark4--- via CnC-List 
>  wrote:
> 
> Paul, thanksI hadn't noticed that, if I switch it over to .com I should 
> be OK; Thanks again!
> 
> Richard
> 
> Richard N. Bush Law Offices 
> 2950 Breckenridge Lane, Suite Nine
> Louisville, Kentucky 40220-1462 
> 502-584-7255
> 
> 
> -Original Message-
> From: Paul Fountain via CnC-List 
> To: cnc-list 
> Cc: Paul Fountain 
> Sent: Tue, Jul 24, 2018 11:19 am
> Subject: Re: Stus-List Structural glass work
> 
> Think it’s because the link is to amazon.ca not amazon.com.
> 
> 
> 
> Paul
>  
> From: 30031472000n behalf of 
> Sent: Tuesday, July 24, 2018 11:07 AM
> To: cnc-list@cnc-list.com
> Cc: bushma...@aol.com 
> Subject: Re: Stus-List Structural glass work
>  
> OK this is weird: I tried to order the Fiberglass manual book and Amazon wont 
> deliver it to my address!  Does it have something to do with it being 
> published in Canada? Does anyone understand this?   Any suggestions on how to 
> get it delivered?
> 
> Richard
> s/v Bushmark4; 1985 C 37 CB; Ohio River, Mile 584
> Richard N. Bush 
> 2950 Breckenridge Lane, Suite Nine
> Louisville, Kentucky 40220-1462 
> 502-584-7255
> 
> 
> -Original Message-
> From: Sylvain Laplante via CnC-List 
> To: C List 
> Cc: Sylvain Laplante  >
> Sent: Tue, Jul 24, 2018 10:57 am
> Subject: Re: Stus-List Structural glass work
> 
> Hi,
>   I read many, and teh Gougeon brothers manuals. By far I would recommend " 
> The fiberglass boat repair manual " by Allan H Vaitses , excellent knowledge 
> with real life experience and very objective in the subjects covered. He 
> built boats, fixed other's mistakes and is a pleasure to read from page one 
> to the end. Look at the cover and you can see the extend of knowledge 
> described in this book.
> 
> https://www.amazon.ca/Fiberglass-Boat-Repair-Manual/dp/0071569146 
> 
> 
> No, my copy is not for sale!
> 
> Sylvain
> C MkIII
> 
> On Monday, July 23, 2018, 9:22:07 PM EDT, Brent Driedger via CnC-List 
>  wrote:
> 
> 
> Hi folks.  
> I’ve worked with fibreglass for years and have pretty much memorized the West 
> epoxy how-to book. I want to learn more about engineering the reinforcements 
> and repairs I’m doing.  Can anyone in the know recommend a good text book on 
> the subject of marine composites which goes into more depth than your typical 
> toilet tank page flipper.  
> Thanks. 
> 
> Brent Driedger 
> s/v Wild Rover
> 27-5
> Lake Winnipeg. 
> 
> Sent from my iPhone
> 
> ___
> 
> Thanks everyone for supporting this list with your contributions.  Each and 
> every one is greatly appreciated.  If you want to support the list - use 
> PayPal to send contribution -- https://www.paypal.me/stumurray 
> 
> 
> ___
> 
> Thanks everyone for supporting this list with your contributions. Each and 
> every one is greatly appreciated. If you want to support the list - use 
> PayPal to send contribution -- https://www.paypal.me/stumurray 
> 
> 
> ___
> 
> Thanks everyone for supporting this list with your contributions. Each and 
> every one is greatly appreciated. If you want to support the list - use 
> PayPal to send contribution --https://www.paypal.me/stumurray 
> 
> 
> ___
> 
> Thanks everyone for supporting this list with your contributions.  Each and 
> every one is greatly appreciated.  If you want to support the list - use 
> PayPal to send contribution --   https://www.paypal.me/stumurray
> 

___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List Structural glass work

[bushmark4--- via CnC-List]

 Paul, thanksI hadn't noticed that, if I switch it over to .com I should be 
OK; Thanks again!

 


Richard

Richard N. Bush Law Offices 
2950 Breckenridge Lane, Suite Nine
Louisville, Kentucky 40220-1462 
502-584-7255

 

 

-Original Message-
From: Paul Fountain via CnC-List 
To: cnc-list 
Cc: Paul Fountain 
Sent: Tue, Jul 24, 2018 11:19 am
Subject: Re: Stus-List Structural glass work




Think it’s because the link is to amazon.ca not amazon.com.







Paul

 
From: 30031472000n behalf of
Sent: Tuesday, July 24, 2018 11:07 AM
To: cnc-list@cnc-list.com
Cc: bushma...@aol.com
Subject: Re: Stus-List Structural glass work
 

OK this is weird: I tried to order the Fiberglass manual book and Amazon wont 
deliver it to my address!  Does it have something to do with it being published 
in Canada? Does anyone understand this?   Any suggestions on how to get it 
delivered?




Richard
s/v Bushmark4; 1985 C 37 CB; Ohio River, Mile 584
Richard N. Bush 
2950 Breckenridge Lane, Suite Nine
Louisville, Kentucky 40220-1462 
502-584-7255





-Original Message-
From: Sylvain Laplante via CnC-List 
To: C List 
Cc: Sylvain Laplante 
Sent: Tue, Jul 24, 2018 10:57 am
Subject: Re: Stus-List Structural glass work





Hi,

  I read many, and teh Gougeon brothers manuals. By far I would recommend " The 
fiberglass boat repair manual " by Allan H Vaitses , excellent knowledge with 
real life experience and very objective in the subjects covered. He built 
boats, fixed other's mistakes and is a pleasure to read from page one to the 
end. Look at the cover and you can see the extend of knowledge described in 
this book.



https://www.amazon.ca/Fiberglass-Boat-Repair-Manual/dp/0071569146


No, my copy is not for sale!



Sylvain
C MkIII








On Monday, July 23, 2018, 9:22:07 PM EDT, Brent Driedger via CnC-List 
 wrote:





Hi folks.  

I’ve worked with fibreglass for years and have pretty much memorized the West 
epoxy how-to book. I want to learn more about engineering the reinforcements 
and repairs I’m doing.  Can anyone in the know recommend a good text book on 
the subject of marine composites which goes into more depth than your typical 
toilet tank page flipper. 

Thanks. 



Brent Driedger 

s/v Wild Rover

27-5

Lake Winnipeg. 



Sent from my iPhone



___



Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution -- https://www.paypal.me/stumurray






___

Thanks everyone for supporting this list with your contributions. Each and 
every one is greatly appreciated. If you want to support the list - use PayPal 
to send contribution --https://www.paypal.me/stumurray



___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray


___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List Structural glass work

[Sylvain Laplante via CnC-List]

 Oh, maybe do your own search, Google knows so much that my links are for 
canadians ( don't worry, you will probably get many ads  in the coming days )  
:-)

Sylvain
C


On Tuesday, July 24, 2018, 11:06:16 AM EDT,  wrote:  
 
  OK this is weird: I tried to order the Fiberglass manual book and Amazon wont 
deliver it to my address!  Does it have something to do with it being published 
in Canada? Does anyone understand this?   Any suggestions on how to get it 
delivered?
 
Richards/v Bushmark4; 1985 C 37 CB; Ohio River, Mile 584
Richard N. Bush 
2950 Breckenridge Lane, Suite Nine
Louisville, Kentucky 40220-1462 
502-584-7255 
 
-Original Message-
From: Sylvain Laplante via CnC-List 
To: C List 
Cc: Sylvain Laplante 
Sent: Tue, Jul 24, 2018 10:57 am
Subject: Re: Stus-List Structural glass work

 Hi,
  I read many, and teh Gougeon brothers manuals. By far I would recommend " The 
fiberglass boat repair manual " by Allan H Vaitses , excellent knowledge with 
real life experience and very objective in the subjects covered. He built 
boats, fixed other's mistakes and is a pleasure to read from page one to the 
end. Look at the cover and you can see the extend of knowledge described in 
this book.

https://www.amazon.ca/Fiberglass-Boat-Repair-Manual/dp/0071569146

No, my copy is not for sale!

Sylvain
C MkIII

On Monday, July 23, 2018, 9:22:07 PM EDT, Brent Driedger via CnC-List 
 wrote:  
 
 Hi folks.  
I’ve worked with fibreglass for years and have pretty much memorized the West 
epoxy how-to book. I want to learn more about engineering the reinforcements 
and repairs I’m doing.  Can anyone in the know recommend a good text book on 
the subject of marine composites which goes into more depth than your typical 
toilet tank page flipper.  
Thanks. 

Brent Driedger 
s/v Wild Rover
27-5
Lake Winnipeg. 

Sent from my iPhone

___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --  https://www.paypal.me/stumurray

  ___

Thanks everyone for supporting this list with your contributions. Each and 
every one is greatly appreciated. If you want to support the list - use PayPal 
to send contribution -- https://www.paypal.me/stumurray

  ___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List Structural glass work

[Paul Fountain via CnC-List]

Think it’s because the link is to amazon.ca not amazon.com.



Paul


From: 30031472000n behalf of
Sent: Tuesday, July 24, 2018 11:07 AM
To: cnc-list@cnc-list.com
Cc: bushma...@aol.com
Subject: Re: Stus-List Structural glass work

OK this is weird: I tried to order the Fiberglass manual book and Amazon wont 
deliver it to my address!  Does it have something to do with it being published 
in Canada? Does anyone understand this?   Any suggestions on how to get it 
delivered?

Richard
s/v Bushmark4; 1985 C 37 CB; Ohio River, Mile 584
Richard N. Bush
2950 Breckenridge Lane, Suite Nine
Louisville, Kentucky 40220-1462
502-584-7255


-Original Message-
From: Sylvain Laplante via CnC-List 
To: C List 
Cc: Sylvain Laplante 
Sent: Tue, Jul 24, 2018 10:57 am
Subject: Re: Stus-List Structural glass work

Hi,
  I read many, and teh Gougeon brothers manuals. By far I would recommend " The 
fiberglass boat repair manual " by Allan H Vaitses , excellent knowledge with 
real life experience and very objective in the subjects covered. He built 
boats, fixed other's mistakes and is a pleasure to read from page one to the 
end. Look at the cover and you can see the extend of knowledge described in 
this book.

https://www.amazon.ca/Fiberglass-Boat-Repair-Manual/dp/0071569146

No, my copy is not for sale!

Sylvain
C MkIII

On Monday, July 23, 2018, 9:22:07 PM EDT, Brent Driedger via CnC-List 
 wrote:


Hi folks.
I’ve worked with fibreglass for years and have pretty much memorized the West 
epoxy how-to book. I want to learn more about engineering the reinforcements 
and repairs I’m doing.  Can anyone in the know recommend a good text book on 
the subject of marine composites which goes into more depth than your typical 
toilet tank page flipper.
Thanks.

Brent Driedger
s/v Wild Rover
27-5
Lake Winnipeg.

Sent from my iPhone

___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --  https://www.paypal.me/stumurray

___

Thanks everyone for supporting this list with your contributions. Each and 
every one is greatly appreciated. If you want to support the list - use PayPal 
to send contribution -- https://www.paypal.me/stumurray

___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List Structural glass work

[bushmark4--- via CnC-List]

 OK this is weird: I tried to order the Fiberglass manual book and Amazon wont 
deliver it to my address!  Does it have something to do with it being published 
in Canada? Does anyone understand this?   Any suggestions on how to get it 
delivered?

 


Richard
s/v Bushmark4; 1985 C 37 CB; Ohio River, Mile 584
Richard N. Bush 
2950 Breckenridge Lane, Suite Nine
Louisville, Kentucky 40220-1462 
502-584-7255

 

 

-Original Message-
From: Sylvain Laplante via CnC-List 
To: C List 
Cc: Sylvain Laplante 
Sent: Tue, Jul 24, 2018 10:57 am
Subject: Re: Stus-List Structural glass work





Hi,

  I read many, and teh Gougeon brothers manuals. By far I would recommend " The 
fiberglass boat repair manual " by Allan H Vaitses , excellent knowledge with 
real life experience and very objective in the subjects covered. He built 
boats, fixed other's mistakes and is a pleasure to read from page one to the 
end. Look at the cover and you can see the extend of knowledge described in 
this book.



https://www.amazon.ca/Fiberglass-Boat-Repair-Manual/dp/0071569146


No, my copy is not for sale!



Sylvain
C MkIII









On Monday, July 23, 2018, 9:22:07 PM EDT, Brent Driedger 
via CnC-List  wrote:







Hi folks.  

I’ve worked with fibreglass for years and have pretty much memorized the West 
epoxy how-to book. I want to learn more about engineering the reinforcements 
and repairs I’m doing.  Can anyone in the know recommend a good text book on 
the subject of marine composites which goes into more depth than your typical 
toilet tank page flipper.  

Thanks. 



Brent Driedger 

s/v Wild Rover

27-5

Lake Winnipeg. 



Sent from my iPhone



___



Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray






___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray


___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List Structural glass work

[Sylvain Laplante via CnC-List]

 Hi,
  I read many, and teh Gougeon brothers manuals. By far I would recommend " The 
fiberglass boat repair manual " by Allan H Vaitses , excellent knowledge with 
real life experience and very objective in the subjects covered. He built 
boats, fixed other's mistakes and is a pleasure to read from page one to the 
end. Look at the cover and you can see the extend of knowledge described in 
this book.

https://www.amazon.ca/Fiberglass-Boat-Repair-Manual/dp/0071569146

No, my copy is not for sale!

Sylvain
C MkIII

On Monday, July 23, 2018, 9:22:07 PM EDT, Brent Driedger via CnC-List 
 wrote:  
 
 Hi folks.  
I’ve worked with fibreglass for years and have pretty much memorized the West 
epoxy how-to book. I want to learn more about engineering the reinforcements 
and repairs I’m doing.  Can anyone in the know recommend a good text book on 
the subject of marine composites which goes into more depth than your typical 
toilet tank page flipper.  
Thanks. 

Brent Driedger 
s/v Wild Rover
27-5
Lake Winnipeg. 

Sent from my iPhone

___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --  https://www.paypal.me/stumurray

  ___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List Standard Horizon CMP23(b or w)

[Josh Muckley via CnC-List]

Sorry guys, Tom decided to take me up on the offer.  As tempting as it is
to start a bidding war... It's only fair to let Tom have it.  If something
goes sideways I'll let you all know.

Thanks,
Josh

On Mon, Jul 23, 2018, 11:20 PM Josh Muckley  wrote:

> I'm waiting on Tom's response and then Jim has dibs.
>
> Josh
>
> On Mon, Jul 23, 2018, 10:58 PM Edd Schillay via CnC-List <
> cnc-list@cnc-list.com> wrote:
>
>> I’m interested. Price?
>>
>> All the best,
>>
>> Edd
>>
>> ---
>> Edd M. Schillay
>> Captain of the Starship Enterprise
>> C 37+ | Sail No: NCC-1701-B
>> City Island, New York
>> www.StarshipSailing.com
>> ---
>> 914.774.9767   | Mobile
>> ---
>> Sent via iPhone X
>> iPhone. iTypos. iApologize
>>
>>
>> On Jul 23, 2018, at 10:49 PM, Joe Della Barba via CnC-List <
>> cnc-list@cnc-list.com> wrote:
>>
>> If no one else wants it I might be interested.
>>
>>
>> Joe
>>
>> Coquina
>>
>> On 7/23/2018 2:09 PM, Josh Muckley via CnC-List wrote:
>>
>> I have one that I'm planning to sell but haven't taken the time.  It's a
>> CMP23w with the uncut extension cord.  Hell you can buy the radio too if
>> you're interested.  SH - INTREPID+
>>
>> Josh Muckley
>> S/V Sea Hawk
>> 1989 C 37+
>> Solomons, MD
>>
>>
>>
>>
>>
>> On Mon, Jul 23, 2018, 1:32 PM Tom Buscaglia via CnC-List <
>> cnc-list@cnc-list.com> wrote:
>>
>>> Does anyone know of a repair place that can fix my RAM mic?  The
>>> microphone is pretty messed up.  Everything else seems fine.  This model
>>> CMP23 is older and no longer supported.  I can’t seem to find one for sale
>>> either.  I hate to replace the whole VHF because of a single bad component.
>>>
>>> Any help is appreciated.
>>>
>>> Tom Buscaglia
>>> S/V Alera
>>> 1990 C 37+/40
>>> Vashon WA
>>> P 206.463.9200
>>> C 305.409.3660
>>>
>>>
>>> On Jul 23, 2018, at 9:00 AM, cnc-list-requ...@cnc-list.com wrote:
>>>
>>> Send CnC-List mailing list submissions to
>>>cnc-list@cnc-list.com
>>>
>>> To subscribe or unsubscribe via the World Wide Web, visit
>>>http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
>>> or, via email, send a message with subject or body 'help' to
>>>cnc-list-requ...@cnc-list.com
>>>
>>> You can reach the person managing the list at
>>>cnc-list-ow...@cnc-list.com
>>>
>>> When replying, please edit your Subject line so it is more specific
>>> than "Re: Contents of CnC-List digest..."
>>>
>>>
>>> Today's Topics:
>>>
>>>   1.  wild B.C.coast (Russ & Melody)
>>>
>>>
>>> --
>>>
>>> Message: 1
>>> Date: Sun, 22 Jul 2018 09:34:39 -0700
>>> From: Russ & Melody 
>>> To: cnc-list@cnc-list.com
>>> Subject: Stus-List wild B.C.coast
>>> Message-ID: <4763e8d23f12d142ecfbf886143f19be@mtlp84>
>>> Content-Type: text/plain; charset="us-ascii"; Format="flowed"
>>>
>>>
>>> Okay. So I don't normally associate our little yacht club as being
>>> part of the wild B.C. coast, except Bathtub Race Weekend and Hell's
>>> Angles bike rides, of course.
>>>
>>> This little story happened on my dock a couple hundred feet from Sweet.
>>>
>>> https://www.cheknews.ca/nanaimo-man-comes-within-meters-of-cougar-before-its-killed-471298/
>>>
>>> That's not to say there aren't regular cougar sightings here. ' just
>>> that the more frequent ones involve bipeds and typically happen on
>>> the weekend when the young lads are sailing. :)
>>>
>>>
>>> oh yeah... and someone lost a canon
>>>
>>> https://www.cheknews.ca/artillery-gun-comes-loose-and-hits-taxi-in-nanaimo-472113/
>>>
>>>
>>> Cheers, Russ
>>> Sweet, 35 mk-1
>>>
>>> ---
>>> This email has been checked for viruses by AVG.
>>> http://www.avg.com
>>> -- next part --
>>> An HTML attachment was scrubbed...
>>> URL: <
>>> http://cnc-list.com/pipermail/cnc-list_cnc-list.com/attachments/20180722/7bb0f23e/attachment-0001.html
>>> >
>>>
>>> --
>>>
>>> Subject: Digest Footer
>>>
>>> ___
>>> CnC-List mailing list
>>> CnC-List@cnc-list.com
>>> http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
>>>
>>>
>>> --
>>>
>>> End of CnC-List Digest, Vol 150, Issue 103
>>> **
>>>
>>> ___
>>>
>>> Thanks everyone for supporting this list with your contributions.  Each
>>> and every one is greatly appreciated.  If you want to support the list -
>>> use PayPal to send contribution --   https://www.paypal.me/stumurray
>>>
>>>
>>
>> ___
>>
>> Thanks everyone for supporting this list with your contributions.  Each and 
>> every one is greatly appreciated.  If you want to support the list - use 
>> PayPal to send contribution --   https://www.paypal.me/stumurray
>>
>>
>> ___
>>
>> Thanks 

Stus-List Vinyl Stripe

[Francois Rivard via CnC-List]

Hi Tom,

 Holland Marine (http://www.hollandmarine.com/) in Toronto has the original
C stars and diamond pattern to add the finished factory look to your
stripe.


I used those on my boat when I re-did the strip 4 years ago, I used a
Bayliner blue stripe (From https://greatlakesskipper.com ) that had the
correct spacing built into the backing.  It came out looking very
professional.

Good Luck with the project.

-Francois Rivard
1990 34+ "Take Five"
Lake Lanier, GA
___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Stus-List Photo Album site

[Stu Murray via CnC-List]

Yes the Photo Album site is down.  I was away for the weekend without internet and found out when we got home.

 

I have contacted my hosting company and am waiting for their reply.  Do not try to email me s...@cncphotoalbum.com -- it does not work either.

 

Will keep everyone posted.

 

Stu

___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List [EXTERNAL] Re: Standard Horizon CMP23(b or w)

[Della Barba, Joe via CnC-List]

Looks like I am number 4 in line or so.


Joe Della Barba
Coquina

From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Josh Muckley 
via CnC-List
Sent: Monday, July 23, 2018 11:20 PM
To: C List
Cc: Josh Muckley
Subject: [EXTERNAL] Re: Stus-List Standard Horizon CMP23(b or w)

I'm waiting on Tom's response and then Jim has dibs.

Josh

On Mon, Jul 23, 2018, 10:58 PM Edd Schillay via CnC-List 
mailto:cnc-list@cnc-list.com>> wrote:
I’m interested. Price?
All the best,

Edd

---
Edd M. Schillay
Captain of the Starship Enterprise
C 37+ | Sail No: NCC-1701-B
City Island, New York
www.StarshipSailing.com
---
914.774.9767   | Mobile
---
Sent via iPhone X
iPhone. iTypos. iApologize


On Jul 23, 2018, at 10:49 PM, Joe Della Barba via CnC-List 
mailto:cnc-list@cnc-list.com>> wrote:

If no one else wants it I might be interested.



Joe

Coquina

On 7/23/2018 2:09 PM, Josh Muckley via CnC-List wrote:
I have one that I'm planning to sell but haven't taken the time.  It's a CMP23w 
with the uncut extension cord.  Hell you can buy the radio too if you're 
interested.  SH - INTREPID+

Josh Muckley
S/V Sea Hawk
1989 C 37+
Solomons, MD




On Mon, Jul 23, 2018, 1:32 PM Tom Buscaglia via CnC-List 
mailto:cnc-list@cnc-list.com>> wrote:
Does anyone know of a repair place that can fix my RAM mic?  The microphone is 
pretty messed up.  Everything else seems fine.  This model CMP23 is older and 
no longer supported.  I can’t seem to find one for sale either.  I hate to 
replace the whole VHF because of a single bad component.

Any help is appreciated.
Tom Buscaglia
S/V Alera
1990 C 37+/40
Vashon WA
P 206.463.9200
C 305.409.3660


On Jul 23, 2018, at 9:00 AM, 
cnc-list-requ...@cnc-list.com wrote:
Send CnC-List mailing list submissions to
   cnc-list@cnc-list.com

To subscribe or unsubscribe via the World Wide Web, visit
   http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
or, via email, send a message with subject or body 'help' to
   cnc-list-requ...@cnc-list.com

You can reach the person managing the list at
   cnc-list-ow...@cnc-list.com

When replying, please edit your Subject line so it is more specific
than "Re: Contents of CnC-List digest..."


Today's Topics:

  1.  wild B.C.coast (Russ & Melody)


--

Message: 1
Date: Sun, 22 Jul 2018 09:34:39 -0700
From: Russ & Melody mailto:russ...@telus.net>>
To: cnc-list@cnc-list.com
Subject: Stus-List wild B.C.coast
Message-ID: <4763e8d23f12d142ecfbf886143f19be@mtlp84>
Content-Type: text/plain; charset="us-ascii"; Format="flowed"


Okay. So I don't normally associate our little yacht club as being
part of the wild B.C. coast, except Bathtub Race Weekend and Hell's
Angles bike rides, of course.

This little story happened on my dock a couple hundred feet from Sweet.
https://www.cheknews.ca/nanaimo-man-comes-within-meters-of-cougar-before-its-killed-471298/

That's not to say there aren't regular cougar sightings here. ' just
that the more frequent ones involve bipeds and typically happen on
the weekend when the young lads are sailing. :)


oh yeah... and someone lost a canon
https://www.cheknews.ca/artillery-gun-comes-loose-and-hits-taxi-in-nanaimo-472113/


Cheers, Russ
Sweet, 35 mk-1

---
This email has been checked for viruses by AVG.
http://www.avg.com
-- next part --
An HTML attachment was scrubbed...
URL: 


--

Subject: Digest Footer

___
CnC-List mailing list
CnC-List@cnc-list.com
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com


--

End of CnC-List Digest, Vol 150, Issue 103
**
___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray


___



Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray



___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray