Re: Stus-List CnC-List Digest, Vol 170, Issue 87
John, I've always drilled out the heads of the screws for any that are stripped and then once the lens is off, you should be able to grab the remainder of the screw with a set of needle nose vice grips to back it out. Use a bit that is the same size as the body of the screw, not the size of the screw head. The head should come off like a ring on the drill bit, and run the drill pretty slowly with good even pressure. James SV Kristy Message: 2 Date: Sat, 21 Mar 2020 21:11:01 + From: John Conklin To: "cnc-list@cnc-list.com" Subject: Re: Stus-List Boat projects again- wire running through rail tube Message-ID: Content-Type: text/plain; charset="utf-8" Following as I cannot remove the lense on my bow light :( small top and bottom Phillips head are stripped. Even hit em with PB blaster This needs to come of to get to 2 bolts the hold casing to pulpit. I have whole new set up But hoping there may be a solution? Before smashing it ! John Conklin S/V Halcyon S/V Heartbeat www.flirtingwithfire.com ___ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
Re: Stus-List CnC-List Digest, Vol 170, Issue 87
Thanks! I will give that a go! I believe this is all original 1982 i was able to get stern, and port but starboard is not budging so hopefully i can turn otherwise will just to change to a new mount and lense John Conklin S/V Halcyon www.flirtingwithfire.net > On Mar 21, 2020, at 5:31 PM, James Nichols via CnC-List > wrote: > > John, > > I've always drilled out the heads of the screws for any that are stripped > and then once the lens is off, you should be able to grab the remainder of > the screw with a set of needle nose vice grips to back it out. > > Use a bit that is the same size as the body of the screw, not the size of > the screw head. The head should come off like a ring on the drill bit, and > run the drill pretty slowly with good even pressure. > > James > SV Kristy > > Message: 2 > Date: Sat, 21 Mar 2020 21:11:01 + > From: John Conklin > To: "cnc-list@cnc-list.com" > Subject: Re: Stus-List Boat projects again- wire running through rail >tube > Message-ID: > > ook.com> > > Content-Type: text/plain; charset="utf-8" > > Following as I cannot remove the lense on my bow light :( small top and > bottom Phillips head are stripped. Even hit em with PB blaster This needs to > come of to get to 2 bolts the hold casing to pulpit. > I have whole new set up > But hoping there may be a solution? Before smashing it ! > > > John Conklin > S/V Halcyon > S/V Heartbeat > www.flirtingwithfire.com > > > ___ > > Thanks everyone for supporting this list with your contributions. Each and > every one is greatly appreciated. If you want to support the list - use > PayPal to send contribution -- https://www.paypal.me/stumurray > ___ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
Re: Stus-List CnC-List Digest, Vol 170, Issue 87
What kind of light? Those s screw or bolts may hard to get if its the combo perko light Sent from my Android. Please forgive typos. Thank you. From: CnC-List on behalf of John Conklin via CnC-List Sent: Saturday, March 21, 2020 5:39:41 PM To: cnc-list@cnc-list.com Cc: John Conklin Subject: Re: Stus-List CnC-List Digest, Vol 170, Issue 87 Thanks! I will give that a go! I believe this is all original 1982 i was able to get stern, and port but starboard is not budging so hopefully i can turn otherwise will just to change to a new mount and lense John Conklin S/V Halcyon www.flirtingwithfire.net<http://www.flirtingwithfire.net> > On Mar 21, 2020, at 5:31 PM, James Nichols via CnC-List > wrote: > > John, > > I've always drilled out the heads of the screws for any that are stripped > and then once the lens is off, you should be able to grab the remainder of > the screw with a set of needle nose vice grips to back it out. > > Use a bit that is the same size as the body of the screw, not the size of > the screw head. The head should come off like a ring on the drill bit, and > run the drill pretty slowly with good even pressure. > > James > SV Kristy > > Message: 2 > Date: Sat, 21 Mar 2020 21:11:01 + > From: John Conklin > To: "cnc-list@cnc-list.com" > Subject: Re: Stus-List Boat projects again- wire running through rail >tube > Message-ID: > > ook.com> > > Content-Type: text/plain; charset="utf-8" > > Following as I cannot remove the lense on my bow light :( small top and > bottom Phillips head are stripped. Even hit em with PB blaster This needs to > come of to get to 2 bolts the hold casing to pulpit. > I have whole new set up > But hoping there may be a solution? Before smashing it ! > > > John Conklin > S/V Halcyon > S/V Heartbeat > www.flirtingwithfire.com<http://www.flirtingwithfire.com> > > > ___ > > Thanks everyone for supporting this list with your contributions. Each and > every one is greatly appreciated. If you want to support the list - use > PayPal to send contribution -- https://www.paypal.me/stumurray > ___ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray ___ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
Re: Stus-List CnC-List Digest, Vol 170, Issue 87
Thinks it’s aquasignal 25 they are separate port and starboard With really limited wire left to connect that’s why I was following Had Same wire issue with the white stern but was able to complete that one and the port lense 1 to go and stripped :( John Conklin S/V Halcyon S/V Heartbeat www.flirtingwithfire.com On Mar 21, 2020, at 6:27 PM, David Risch via CnC-List wrote: What kind of light? Those s screw or bolts may hard to get if its the combo perko light Sent from my Android. Please forgive typos. Thank you. From: CnC-List on behalf of John Conklin via CnC-List Sent: Saturday, March 21, 2020 5:39:41 PM To: cnc-list@cnc-list.com Cc: John Conklin Subject: Re: Stus-List CnC-List Digest, Vol 170, Issue 87 Thanks! I will give that a go! I believe this is all original 1982 i was able to get stern, and port but starboard is not budging so hopefully i can turn otherwise will just to change to a new mount and lense John Conklin S/V Halcyon www.flirtingwithfire.net<http://www.flirtingwithfire.net> > On Mar 21, 2020, at 5:31 PM, James Nichols via CnC-List > wrote: > > John, > > I've always drilled out the heads of the screws for any that are stripped > and then once the lens is off, you should be able to grab the remainder of > the screw with a set of needle nose vice grips to back it out. > > Use a bit that is the same size as the body of the screw, not the size of > the screw head. The head should come off like a ring on the drill bit, and > run the drill pretty slowly with good even pressure. > > James > SV Kristy > > Message: 2 > Date: Sat, 21 Mar 2020 21:11:01 + > From: John Conklin > To: "cnc-list@cnc-list.com" > Subject: Re: Stus-List Boat projects again- wire running through rail >tube > Message-ID: > > ook.com> > > Content-Type: text/plain; charset="utf-8" > > Following as I cannot remove the lense on my bow light :( small top and > bottom Phillips head are stripped. Even hit em with PB blaster This needs to > come of to get to 2 bolts the hold casing to pulpit. > I have whole new set up > But hoping there may be a solution? Before smashing it ! > > > John Conklin > S/V Halcyon > S/V Heartbeat > www.flirtingwithfire.com<http://www.flirtingwithfire.com> > > > ___ > > Thanks everyone for supporting this list with your contributions. Each and > every one is greatly appreciated. If you want to support the list - use > PayPal to send contribution -- https://www.paypal.me/stumurray > ___ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray ___ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray ___ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray