Re: Stus-List Harken furling question

[Lee via CnC-List]

Matt,I am pretty sure that later unit 2 torque tubes are the same shape as the 
early ones therefore will fit into your lower housing. I know that Harken 
changed how the sections are connected so if you can find series2 or maybe 
later sections and proper conecters you should be good to go.On the off chance 
that you have to go more modern,you maybe able to swap the lower torque 
housing.A good rigger with 
H arken experience should be able to help. Good luck!  Lee   .Christiansen 1987 
C 35-3
 
-Original Message-
From: Matthew L. Wolford via CnC-List 
To: cnc-list 
Cc: Matthew L. Wolford 
Sent: Fri, Apr 27, 2018 9:04 am
Subject: Stus-List Harken furling question




Listers:
 
Question for you.  I have an ‘80s vintage Harken roller furler -- Mk I, 
Unit 2 – with a damaged torque tube.  Harken no longer supplies replacement 
parts for this unit.  I have done a couple internet searches and looked on 
e-Bay for a used torque tube to no avail.  Do any of you have any idea where I 
might find one?  Thanks in advance for your suggestions.
 
Matt Wolford
C 42 Custom


___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray


___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List Harken furling question

[Matthew L. Wolford via CnC-List]

Thanks, Dennis.  It occurred to me that with all the hurricane damage in the 
past few years I may get lucky.  We’ll see.

From: Dennis C. via CnC-List 
Sent: Friday, April 27, 2018 9:40 AM
To: CnClist 
Cc: Dennis C. 
Subject: Re: Stus-List Harken furling question

Matt, 

That's going to be tough.  My rigger buddy and I faced this situation a couple 
years ago.  Parts for MKI furlers are practically non-existent.

You could call a bunch of rigging shops but my guess is you'll come up empty.  
The best rigging shop on the Gulf Coast is Zern Rigging.  Call Rick at 
850-439-1453.  Touche' is docked near Rick's shop.  If you find one there I can 
try to get it to you.

If some other listers post the contact info for good rigging shops in their 
area, maybe you'll find one hidden away somewhere.

Dennis C.
Touche' 35-1 #83
Mandeville, LA

On Fri, Apr 27, 2018 at 8:03 AM, Matthew L. Wolford via CnC-List 
<cnc-list@cnc-list.com> wrote:

  Listers:
  Question for you.  I have an ‘80s vintage Harken roller furler -- Mk I, 
Unit 2 – with a damaged torque tube.  Harken no longer supplies replacement 
parts for this unit.  I have done a couple internet searches and looked on 
e-Bay for a used torque tube to no avail.  Do any of you have any idea where I 
might find one?  Thanks in advance for your suggestions.
  Matt Wolford
  C 42 Custom

  ___

  Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray







___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List Harken furling question

[Dennis C. via CnC-List]

Matt,

That's going to be tough.  My rigger buddy and I faced this situation a
couple years ago.  Parts for MKI furlers are practically non-existent.

You could call a bunch of rigging shops but my guess is you'll come up
empty.  The best rigging shop on the Gulf Coast is Zern Rigging.  Call Rick
at 850-439-1453.  Touche' is docked near Rick's shop.  If you find one
there I can try to get it to you.

If some other listers post the contact info for good rigging shops in their
area, maybe you'll find one hidden away somewhere.

Dennis C.
Touche' 35-1 #83
Mandeville, LA

On Fri, Apr 27, 2018 at 8:03 AM, Matthew L. Wolford via CnC-List <
cnc-list@cnc-list.com> wrote:

> Listers:
>
> Question for you.  I have an ‘80s vintage Harken roller furler -- Mk
> I, Unit 2 – with a damaged torque tube.  Harken no longer supplies
> replacement parts for this unit.  I have done a couple internet searches
> and looked on e-Bay for a used torque tube to no avail.  Do any of you have
> any idea where I might find one?  Thanks in advance for your suggestions.
>
> Matt Wolford
> C 42 Custom
>
> ___
>
> Thanks everyone for supporting this list with your contributions.  Each
> and every one is greatly appreciated.  If you want to support the list -
> use PayPal to send contribution --   https://www.paypal.me/stumurray
>
>
>
___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray