Re: Stus-List Cove stripe

[Dennis C. via CnC-List]

I applied 3M Scotchcal striping tape for Touche's (1971 35-1) cove stripe
after repainting.  Specifically 5/8 inch gold metallic, 3M 73403.  It fits
the cove stripe depression very well.  Here's a pic:

https://drive.google.com/file/d/0B_sb5TfIENvsckJWcWNldEFydjg/view?usp=sharing

Dennis C.
Touche' 35-1 #83
Mandeville, LA

On Sat, Jun 6, 2020 at 7:19 PM Lewis Cooke via CnC-List <
cnc-list@cnc-list.com> wrote:

> I am working on an early C&C 30-1 does anyone have a pic of the origanal
> cove stripe. I see that Holland marine sells the stars and diamonds but
> they say the stripes the have are an inch wide half inch with eighth inch
> on either side can anyone confirm this, thank you
> Lewis Cooke
> C&C 30-1 #45
> S/V For Play
> ___
>
> Thanks everyone for supporting this list with your contributions.  Each
> and every one is greatly appreciated.  If you want to support the list -
> use PayPal to send contribution --   https://www.paypal.me/stumurray
>
>

-- 
Dennis C.
Touche' 35-1 #83
Mandeville, LA
___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List Cove stripe

[Joel Delamirande via CnC-List]

I have a 73  30 foot if that helps



On Sat, Jun 6, 2020 at 8:19 PM Lewis Cooke via CnC-List <
cnc-list@cnc-list.com> wrote:

> I am working on an early C&C 30-1 does anyone have a pic of the origanal
> cove stripe. I see that Holland marine sells the stars and diamonds but
> they say the stripes the have are an inch wide half inch with eighth inch
> on either side can anyone confirm this, thank you
> Lewis Cooke
> C&C 30-1 #45
> S/V For Play
> ___
>
> Thanks everyone for supporting this list with your contributions.  Each
> and every one is greatly appreciated.  If you want to support the list -
> use PayPal to send contribution --   https://www.paypal.me/stumurray
>
> --
Joel Delamirande
*www.jdroofing.ca *
___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Stus-List Cove stripe

[Lewis Cooke via CnC-List]

I am working on an early C&C 30-1 does anyone have a pic of the origanal
cove stripe. I see that Holland marine sells the stars and diamonds but
they say the stripes the have are an inch wide half inch with eighth inch
on either side can anyone confirm this, thank you
Lewis Cooke
C&C 30-1 #45
S/V For Play
___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List Cove stripe and symbol

[Neil E. Andersen via CnC-List]

Anyone know of a similar organization in the US for all things C&C?

Neil 

Neil Andersen 
1982 C&C 32 FoxFire

Rock Hall, MD 21661

+++

Save money and the environment.

Use Century Gothic font and save 30% of your ink

 

From: CnC-List  On Behalf Of Ken Heaton via 
CnC-List
Sent: Monday, April 9, 2018 8:36 AM
To: cnc-list 
Cc: Ken Heaton 
Subject: Re: Stus-List Cove stripe and symbol

 

Holland Marine stocks the stars and the stripe tape.  I haven't bought any from 
them so cannot comment on the quality.

 

A link to the page is here: http://www.hollandmarine.com/CCfolder/CC001.html

 

...scroll down a bit

 

Ken H.

 

On 8 April 2018 at 17:46, DAVID R MOCNY via CnC-List mailto:cnc-list@cnc-list.com> > wrote:

I did mine in 2012 and it still looks new.   I still have the leftover and just 
checked. I ordered 3/4 inch. It fit perfectly because it curves in to the 
groove.  I looked and the place is still in business.  Vinalstriping.com.  $34 
for a 150 foot roll.  For the stars, they sell 14 inch wide by the foot for $3 
a foot. I do not remember but probably got four feet. Cut into a foot for each 
star.  Covered the whole star and cut around the edges and had the stars done 
with no seams.   Get the premium vinal not the cheap stuff.  

 

David Mocny

37/40+

Obsession

Flowery Branch, Georgia

 

 

P.S.   Because of health reasons, we are selling our boat.

It is on sailboatlisting.com <http://sailboatlisting.com>  if anyone is 
interested

 

 

 

On Sun, Apr 8, 2018 at 2:50 PM, David Knecht via CnC-List

mailto:cnc-list@cnc-list.com> > wrote:

I am considering redoing the cove stripe on my boat as it is pretty faded.  I 
found a few old emails about this topic and both used vinyl tape.  One person 
used 1/2” tape and one 5/8” and I can see the logic for both.  Anyone done this 
more recently or have comments on  longevity?  How did you handle the symbol at 
the front (star?).  Dave

 

Aries

1990 C&C 34+

New London, CT




 

___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --  https://www.paypal.me/stumurray


___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray



 

___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List Cove stripe and symbol

[Ken Heaton via CnC-List]

Holland Marine stocks the stars and the stripe tape.  I haven't bought any
from them so cannot comment on the quality.

A link to the page is here: http://www.hollandmarine.com/CCfolder/CC001.html

...scroll down a bit

Ken H.

On 8 April 2018 at 17:46, DAVID R MOCNY via CnC-List 
wrote:

> I did mine in 2012 and it still looks new.   I still have the leftover and
> just checked. I ordered 3/4 inch. It fit perfectly because it curves in to
> the groove.  I looked and the place is still in business.
> Vinalstriping.com.  $34 for a 150 foot roll.  For the stars, they sell 14
> inch wide by the foot for $3 a foot. I do not remember but probably got
> four feet. Cut into a foot for each star.  Covered the whole star and cut
> around the edges and had the stars done with no seams.   Get the premium
> vinal not the cheap stuff.
>
> David Mocny
> 37/40+
> Obsession
> Flowery Branch, Georgia
>
>
> P.S.   Because of health reasons, we are selling our boat.
> It is on sailboatlisting.com if anyone is interested
>
>
>
> On Sun, Apr 8, 2018 at 2:50 PM, David Knecht via CnC-List
>  wrote:
> I am considering redoing the cove stripe on my boat as it is pretty
> faded.  I found a few old emails about this topic and both used vinyl
> tape.  One person used 1/2” tape and one 5/8” and I can see the logic for
> both.  Anyone done this more recently or have comments on  longevity?  How
> did you handle the symbol at the front (star?).  Dave
>
> Aries
> 1990 C&C 34+
> New London, CT
>
>
> ___
>
> Thanks everyone for supporting this list with your contributions.  Each
> and every one is greatly appreciated.  If you want to support the list -
> use PayPal to send contribution --  https://www.paypal.me/stumurray
>
>
> ___
>
> Thanks everyone for supporting this list with your contributions.  Each
> and every one is greatly appreciated.  If you want to support the list -
> use PayPal to send contribution --   https://www.paypal.me/stumurray
>
>
>
___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List Cove stripe and symbol

[DAVID R MOCNY via CnC-List]

I did mine in 2012 and it still looks new.   I still have the leftover and just 
checked. I ordered 3/4 inch. It fit perfectly because it curves in to the 
groove.  I looked and the place is still in business.  Vinalstriping.com.  $34 
for a 150 foot roll.  For the stars, they sell 14 inch wide by the foot for $3 
a foot. I do not remember but probably got four feet. Cut into a foot for each 
star.  Covered the whole star and cut around the edges and had the stars done 
with no seams.   Get the premium vinal not the cheap stuff.  
David Mocny37/40+ObsessionFlowery Branch, Georgia

P.S.   Because of health reasons, we are selling our boat.It is on 
sailboatlisting.com if anyone is interested

 
 
  On Sun, Apr 8, 2018 at 2:50 PM, David Knecht via 
CnC-List wrote:   I am considering redoing the cove 
stripe on my boat as it is pretty faded.  I found a few old emails about this 
topic and both used vinyl tape.  One person used 1/2” tape and one 5/8” and I 
can see the logic for both.  Anyone done this more recently or have comments on 
 longevity?  How did you handle the symbol at the front (star?).  Dave
Aries1990 C&C 34+New London, CT

___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --  https://www.paypal.me/stumurray

  
___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List Cove stripe and symbol

[Dennis C. via CnC-List]

I removed the old tape with a 3M Stripe Off wheel and used 3M 5/8 gold
tape.  I did not add the star.  Looks good.

Dennis C.
Touche' 35-1 #83
Mandeville, LA

On Sun, Apr 8, 2018 at 1:49 PM, David Knecht via CnC-List <
cnc-list@cnc-list.com> wrote:

> I am considering redoing the cove stripe on my boat as it is pretty
> faded.  I found a few old emails about this topic and both used vinyl
> tape.  One person used 1/2” tape and one 5/8” and I can see the logic for
> both.  Anyone done this more recently or have comments on  longevity?  How
> did you handle the symbol at the front (star?).  Dave
>
> Aries
> 1990 C&C 34+
> New London, CT
>
>
>
> ___
>
> Thanks everyone for supporting this list with your contributions.  Each
> and every one is greatly appreciated.  If you want to support the list -
> use PayPal to send contribution --   https://www.paypal.me/stumurray
>
>
>
___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List Cove stripe and symbol

[Rod Stright via CnC-List]

I have a C&C 99 and just measured mine.  1/2” will work best if I use 5/8” the 
edges will protrude out of the mounded cove and it will be much more difficult 
to line up.  Since the edges may be out of cove the edges may wear out quickly.

Rod

Sent from my iPhone

> On Apr 8, 2018, at 3:49 PM, David Knecht via CnC-List  
> wrote:
> 
> I am considering redoing the cove stripe on my boat as it is pretty faded.  I 
> found a few old emails about this topic and both used vinyl tape.  One person 
> used 1/2” tape and one 5/8” and I can see the logic for both.  Anyone done 
> this more recently or have comments on  longevity?  How did you handle the 
> symbol at the front (star?).  Dave
> 
> Aries
> 1990 C&C 34+
> New London, CT
> 
> 
> 
> ___
> 
> Thanks everyone for supporting this list with your contributions.  Each and 
> every one is greatly appreciated.  If you want to support the list - use 
> PayPal to send contribution --   https://www.paypal.me/stumurray
> 
___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Stus-List Cove stripe and symbol

[David Knecht via CnC-List]

I am considering redoing the cove stripe on my boat as it is pretty faded.  I 
found a few old emails about this topic and both used vinyl tape.  One person 
used 1/2” tape and one 5/8” and I can see the logic for both.  Anyone done this 
more recently or have comments on  longevity?  How did you handle the symbol at 
the front (star?).  Dave

Aries
1990 C&C 34+
New London, CT



___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List Cove Stripe Painting

[Dennis C.]

Didn't. I applied the tape after boat was painted. I made a template for 
cutting the ends so they would all be the same. 

Before painting I removed the old tape with a 3M stripe off wheel. Could tell 
if it was tape or paint or tape over a previous painted stripe 

Dennis C.

Sent from my iPhone

On May 2, 2013, at 8:48 AM, Curtis  wrote:

> How did you prep it?
> 
> On 5/2/13, Dennis C.  wrote:
>> I used 5/8 inch tape. The curve adds a bit to the width of tape needed.
>> 
>> Dennis C.
>> 
>> Sent from my iPhone
>> 
>> On May 1, 2013, at 7:43 PM, Rick Taillieu  wrote:
>> 
>>> They are hard to get right.
>>> The first time I painted my boat I taped off the cove stripe right where
>>> the indent meets the hull, it ended up too wide and looked funny.
>>> After painting this time I still haven’t done the cove stripe but I’m
>>> leaning toward ½” tape stripe.
>>> 
>>> Rick Taillieu
>>> Nemesis
>>> '75 C&C 25  #371
>>> Shearwater Yacht Club
>>> Halifax, NS.
>>> 
>>> 
>>> 
>>> From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Bob
>>> Moriarty
>>> Sent: May-01-13 9:27 PM
>>> To: cnc-list@cnc-list.com
>>> Subject: Stus-List Cove Stripe Painting
>>> 
>>> Speaking of boot stripes but a couple of feet higher, has anyone had
>>> difficulty repainting their cove stripe, which on Ox is engraved and has
>>> uneven edges?
>>> 
>>> The first attempt I assigned to my son, hoping he'd become more detail
>>> oriented. For the second attempt I used a 1/4"(?) roll of painters tape
>>> that I circumscribed with a razor into two 1/8" rolls and tried it myself.
>>> 
>>> 
>>> It was difficult to tape a straight edge because it encompassed three
>>> dimensions. I eventually settled on a compromise that is now unpleasant to
>>> the eye.
>>> 
>>> Bob M
>>> Ox 33-1
>>> Jax, FL
>>> No virus found in this message.
>>> Checked by AVG - www.avg.com
>>> Version: 2013.0.3272 / Virus Database: 3162/6287 - Release Date: 04/30/13
>>> ___
>>> This List is provided by the C&C Photo Album
>>> http://www.cncphotoalbum.com
>>> CnC-List@cnc-list.com
>> 
> 
> 
> -- 
> “The pessimist complains about the wind; the optimist expects it to
> change; the realist adjusts the sails.”
> 
> ___
> This List is provided by the C&C Photo Album
> http://www.cncphotoalbum.com
> CnC-List@cnc-list.com

___
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com

Re: Stus-List Cove Stripe Painting

[Curtis]

How did you prep it?

On 5/2/13, Dennis C.  wrote:
> I used 5/8 inch tape. The curve adds a bit to the width of tape needed.
>
> Dennis C.
>
> Sent from my iPhone
>
> On May 1, 2013, at 7:43 PM, Rick Taillieu  wrote:
>
>> They are hard to get right.
>> The first time I painted my boat I taped off the cove stripe right where
>> the indent meets the hull, it ended up too wide and looked funny.
>> After painting this time I still haven’t done the cove stripe but I’m
>> leaning toward ½” tape stripe.
>>
>> Rick Taillieu
>> Nemesis
>> '75 C&C 25  #371
>> Shearwater Yacht Club
>> Halifax, NS.
>>
>>
>>
>> From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Bob
>> Moriarty
>> Sent: May-01-13 9:27 PM
>> To: cnc-list@cnc-list.com
>> Subject: Stus-List Cove Stripe Painting
>>
>> Speaking of boot stripes but a couple of feet higher, has anyone had
>> difficulty repainting their cove stripe, which on Ox is engraved and has
>> uneven edges?
>>
>> The first attempt I assigned to my son, hoping he'd become more detail
>> oriented. For the second attempt I used a 1/4"(?) roll of painters tape
>> that I circumscribed with a razor into two 1/8" rolls and tried it myself.
>>
>>
>> It was difficult to tape a straight edge because it encompassed three
>> dimensions. I eventually settled on a compromise that is now unpleasant to
>> the eye.
>>
>> Bob M
>> Ox 33-1
>> Jax, FL
>> No virus found in this message.
>> Checked by AVG - www.avg.com
>> Version: 2013.0.3272 / Virus Database: 3162/6287 - Release Date: 04/30/13
>> ___
>> This List is provided by the C&C Photo Album
>> http://www.cncphotoalbum.com
>> CnC-List@cnc-list.com
>


-- 
“The pessimist complains about the wind; the optimist expects it to
change; the realist adjusts the sails.”

___
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com

Re: Stus-List Cove Stripe Painting

[Dennis C.]

I used 5/8 inch tape. The curve adds a bit to the width of tape needed. 

Dennis C.

Sent from my iPhone

On May 1, 2013, at 7:43 PM, Rick Taillieu  wrote:

> They are hard to get right.
> The first time I painted my boat I taped off the cove stripe right where the 
> indent meets the hull, it ended up too wide and looked funny.
> After painting this time I still haven’t done the cove stripe but I’m leaning 
> toward ½” tape stripe.
>  
> Rick Taillieu
> Nemesis
> '75 C&C 25  #371
> Shearwater Yacht Club
> Halifax, NS.
>  
>  
>  
> From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Bob 
> Moriarty
> Sent: May-01-13 9:27 PM
> To: cnc-list@cnc-list.com
> Subject: Stus-List Cove Stripe Painting
>  
> Speaking of boot stripes but a couple of feet higher, has anyone had 
> difficulty repainting their cove stripe, which on Ox is engraved and has 
> uneven edges? 
>  
> The first attempt I assigned to my son, hoping he'd become more detail 
> oriented. For the second attempt I used a 1/4"(?) roll of painters tape that 
> I circumscribed with a razor into two 1/8" rolls and tried it myself. 
>  
> It was difficult to tape a straight edge because it encompassed three 
> dimensions. I eventually settled on a compromise that is now unpleasant to 
> the eye.
>  
> Bob M
> Ox 33-1
> Jax, FL
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 2013.0.3272 / Virus Database: 3162/6287 - Release Date: 04/30/13
> ___
> This List is provided by the C&C Photo Album
> http://www.cncphotoalbum.com
> CnC-List@cnc-list.com
___
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com

Re: Stus-List Cove Stripe Painting

[Paul Baker]

I used 1/2" white 3M striping tape.
Nice crisp line, not going to last forever, but it's been on there about 
3 years and still looks good.

Cheers,
Paul.

Tangerine
79 C&C24
Sidney, BC


On 13-05-01 05:43 PM, Rick Taillieu wrote:


They are hard to get right.

The first time I painted my boat I taped off the cove stripe right 
where the indent meets the hull, it ended up too wide and looked funny.


After painting this time I still haven't done the cove stripe but I'm 
leaning toward ½" tape stripe.


Rick Taillieu

Nemesis

'75 C&C 25  #371

Shearwater Yacht Club

Halifax, NS.

*From:*CnC-List [mailto:cnc-list-boun...@cnc-list.com] *On Behalf Of 
*Bob Moriarty

*Sent:* May-01-13 9:27 PM
*To:* cnc-list@cnc-list.com
*Subject:* Stus-List Cove Stripe Painting

Speaking of boot stripes but a couple of feet higher, has anyone had 
difficulty repainting their cove stripe, which on Ox is engraved and 
has uneven edges?


The first attempt I assigned to my son, hoping he'd become more detail 
oriented. For the second attempt I used a 1/4"(?) roll of painters 
tape that I circumscribed with a razor into two 1/8" rolls and tried 
it myself.


It was difficult to tape a straight edge because it encompassed three 
dimensions. I eventually settled on a compromise that is now 
unpleasant to the eye.


Bob M

Ox 33-1

Jax, FL



No virus found in this message.
Checked by AVG - www.avg.com <http://www.avg.com>
Version: 2013.0.3272 / Virus Database: 3162/6287 - Release Date: 04/30/13



___
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com


___
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com

Re: Stus-List Cove Stripe Painting

[Dennis C.]

After Touché was reprinted in 2010, I replaced the cove stripe with 3M 
automotive tape. 

Prior to painting, I removed the old stripe with a 3M Stripe Off wheel. It had 
ragged edges but came off easily with the wheel. 

Dennis C.
Touché 35-1 #83
Mandeville, LA

Sent from my iPhone

On May 1, 2013, at 7:27 PM, Bob Moriarty  wrote:

> Speaking of boot stripes but a couple of feet higher, has anyone had 
> difficulty repainting their cove stripe, which on Ox is engraved and has 
> uneven edges? 
> 
> The first attempt I assigned to my son, hoping he'd become more detail 
> oriented. For the second attempt I used a 1/4"(?) roll of painters tape that 
> I circumscribed with a razor into two 1/8" rolls and tried it myself. 
> 
> It was difficult to tape a straight edge because it encompassed three 
> dimensions. I eventually settled on a compromise that is now unpleasant to 
> the eye.
> 
> Bob M
> Ox 33-1
> Jax, FL
> ___
> This List is provided by the C&C Photo Album
> http://www.cncphotoalbum.com
> CnC-List@cnc-list.com

___
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com

Re: Stus-List Cove Stripe Painting

[Rick Taillieu]

They are hard to get right.

The first time I painted my boat I taped off the cove stripe right where the
indent meets the hull, it ended up too wide and looked funny.

After painting this time I still haven’t done the cove stripe but I’m
leaning toward ½” tape stripe.

 

Rick Taillieu

Nemesis

'75 C&C 25  #371

Shearwater Yacht Club

Halifax, NS.

 

 

 

From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Bob
Moriarty
Sent: May-01-13 9:27 PM
To: cnc-list@cnc-list.com
Subject: Stus-List Cove Stripe Painting

 

Speaking of boot stripes but a couple of feet higher, has anyone had
difficulty repainting their cove stripe, which on Ox is engraved and has
uneven edges? 

 

The first attempt I assigned to my son, hoping he'd become more detail
oriented. For the second attempt I used a 1/4"(?) roll of painters tape that
I circumscribed with a razor into two 1/8" rolls and tried it myself. 

 

It was difficult to tape a straight edge because it encompassed three
dimensions. I eventually settled on a compromise that is now unpleasant to
the eye.

 

Bob M

Ox 33-1

Jax, FL

  _  

No virus found in this message.
Checked by AVG - www.avg.com
Version: 2013.0.3272 / Virus Database: 3162/6287 - Release Date: 04/30/13

___
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com

Stus-List Cove Stripe Painting

[Bob Moriarty]

Speaking of boot stripes but a couple of feet higher, has anyone had
difficulty repainting their cove stripe, which on Ox is engraved and has
uneven edges?

The first attempt I assigned to my son, hoping he'd become more detail
oriented. For the second attempt I used a 1/4"(?) roll of painters tape
that I circumscribed with a razor into two 1/8" rolls and tried it myself.

It was difficult to tape a straight edge because it encompassed three
dimensions. I eventually settled on a compromise that is now unpleasant to
the eye.

Bob M
Ox 33-1
Jax, FL
___
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com