Stus-List Re: Recommended Masthead/Deck Light combo replacement [now mast rebuild]
Agreed. I searched. I would have liked a bluenose. Considered the dime but I felt it was more important (just for the sake of it) to have a larger, higher value Canadian coin, minted in 1989. I even half-heartedly looked for gold and platinum options to get the bluenose. Josh Muckley S/V Sea Hawk 1989 C 37+ Solomons, MD On Thu, Mar 18, 2021, 21:06 Marek Dziedzic via CnC-List < cnc-list@cnc-list.com> wrote: > A Bluenose silver dollar would probably be more appropriate, but I don’t > think there is one from 1989. But a Canadian dime for sure is (e.g., > https://www.coinsunlimited.ca/circulation-coins/all-canadian-circulation-coins-lots-rolls/1989-Canadian-10-Cent-Bluenose-Brilliant-Uncirculated > ). > > > > Marek > > Ottawa, ON > > > > *From:* Josh Muckley via CnC-List > *Sent:* March 18, 2021 18:49 > *To:* Stus-List > *Cc:* Josh Muckley > *Subject:* Stus-List Re: Recommended Masthead/Deck Light combo > replacement [now mast rebuild] > > > > Canadian Silver coin with a nautical theme and minted the same year as my > boat was built. > > > > > https://www.ebay.com/itm/Royal-Canadian-Mint-1-Silver-Dollar-MacKenzie-River-Exploration-/333860863439?_trksid=p2349624.m46890.l49292 > <https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ebay.com%2Fitm%2FRoyal-Canadian-Mint-1-Silver-Dollar-MacKenzie-River-Exploration-%2F333860863439%3F_trksid%3Dp2349624.m46890.l49292=04%7C01%7C%7C42e73c098a354db82b9908d8ea601943%7C84df9e7fe9f640afb435%7C1%7C0%7C637517045750264526%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000=FazTtXZYQ37hKaV5gRx3I4y%2FgKZAbnZ%2FbypefQ%2FVazM%3D=0> > > > > No not particularly superstitious but I figured for the relatively low > cost and low effort this little bit of superstition was worth it. > > > > Josh Muckley > > S/V Sea Hawk > > 1989 C 37+ > > Solomons, MD > > > > > > > > > > On Thu, Mar 18, 2021, 16:39 Bill Coleman via CnC-List < > cnc-list@cnc-list.com> wrote: > > Wow, is that a Silver Dollar on your mast step, or just a Looney? You > must be superstitious. > > > > > > Bill Coleman > > Entrada, Erie, PA > > > > > > > > *From:* Josh Muckley via CnC-List [mailto:cnc-list@cnc-list.com] > *Sent:* Thursday, March 18, 2021 10:46 AM > *Cc:* Stus-List; Josh Muckley > *Subject:* Stus-List Re: Recommended Masthead/Deck Light combo > replacement [now mast rebuild] > > > > The yard used awlgrip 2000, pearl gray if I recall correctly. Stripped > all hardware and wiring, welded shut vestigial holes, ground them flat and > then primed and painted. Re-wired, refitted, replaced all rod rigging. > > > > Here is the link to the whole project. > > https://drive.google.com/folderview?id=1eSqX7wZP1r77hD84wDmGAQSI0Tqbn9xm > <https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fdrive.google.com%2Ffolderview%3Fid%3D1eSqX7wZP1r77hD84wDmGAQSI0Tqbn9xm=04%7C01%7C%7C42e73c098a354db82b9908d8ea601943%7C84df9e7fe9f640afb435%7C1%7C0%7C637517045750264526%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000=NDktts%2F8biFhQEV%2BW1W3sb8eloyphFVguDc8ZagV%2Fvc%3D=0> > > > > I pretty sure the next question is going to be "how much?" > > > > ~1k for each rod and hardware. I have 4 shrouds on each side plus head > and back. 10 total > > > > ~3k for the paint job alone > > > > All said and done it came to roughly 20k > > > > Josh Muckley > > S/V Sea Hawk > > 1989 C 37+ > > Solomons, MD > > > > On Thu, Mar 18, 2021, 10:19 David Swensen > wrote: > > Josh, Lets talk about your mast and spreaders. What did you use to paint > them? They look great. > > > > On Thu, Mar 18, 2021 at 9:54 AM Josh Muckley via CnC-List < > cnc-list@cnc-list.com> wrote: > > I replaced my Aqua Signal with the marine beam. Perfect replacement fit. > No problem. Highly recommend. I also did Aqua Signal LEDs on the > spreaders. Very low profile and they work phenomenally - almost too bright! > > > > https://store.marinebeam.com/led-masthead-foredeck-combination-light/ > <https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fstore.marinebeam.com%2Fled-masthead-foredeck-combination-light%2F=04%7C01%7C%7C42e73c098a354db82b9908d8ea601943%7C84df9e7fe9f640afb435%7C1%7C0%7C637517045750274485%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000=T6W54UY7gaotxsAAUaczlBNnR4w1Hf15H%2Fu%2BLzjydxY%3D=0> > > > > > https://drive.google.com/file/d/1CdFzOH89I3fwlZeumTcWlLxQ
Stus-List Re: Recommended Masthead/Deck Light combo replacement [now mast rebuild]
A Bluenose silver dollar would probably be more appropriate, but I don't think there is one from 1989. But a Canadian dime for sure is (e.g., https://www.coinsunlimited.ca/circulation-coins/all-canadian-circulation-coins-lots-rolls/1989-Canadian-10-Cent-Bluenose-Brilliant-Uncirculated). Marek Ottawa, ON From: Josh Muckley via CnC-List Sent: March 18, 2021 18:49 To: Stus-List Cc: Josh Muckley Subject: Stus-List Re: Recommended Masthead/Deck Light combo replacement [now mast rebuild] Canadian Silver coin with a nautical theme and minted the same year as my boat was built. https://www.ebay.com/itm/Royal-Canadian-Mint-1-Silver-Dollar-MacKenzie-River-Exploration-/333860863439?_trksid=p2349624.m46890.l49292<https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ebay.com%2Fitm%2FRoyal-Canadian-Mint-1-Silver-Dollar-MacKenzie-River-Exploration-%2F333860863439%3F_trksid%3Dp2349624.m46890.l49292=04%7C01%7C%7C42e73c098a354db82b9908d8ea601943%7C84df9e7fe9f640afb435%7C1%7C0%7C637517045750264526%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000=FazTtXZYQ37hKaV5gRx3I4y%2FgKZAbnZ%2FbypefQ%2FVazM%3D=0> No not particularly superstitious but I figured for the relatively low cost and low effort this little bit of superstition was worth it. Josh Muckley S/V Sea Hawk 1989 C 37+ Solomons, MD On Thu, Mar 18, 2021, 16:39 Bill Coleman via CnC-List mailto:cnc-list@cnc-list.com>> wrote: Wow, is that a Silver Dollar on your mast step, or just a Looney? You must be superstitious. Bill Coleman Entrada, Erie, PA From: Josh Muckley via CnC-List [mailto:cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com>] Sent: Thursday, March 18, 2021 10:46 AM Cc: Stus-List; Josh Muckley Subject: Stus-List Re: Recommended Masthead/Deck Light combo replacement [now mast rebuild] The yard used awlgrip 2000, pearl gray if I recall correctly. Stripped all hardware and wiring, welded shut vestigial holes, ground them flat and then primed and painted. Re-wired, refitted, replaced all rod rigging. Here is the link to the whole project. https://drive.google.com/folderview?id=1eSqX7wZP1r77hD84wDmGAQSI0Tqbn9xm<https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fdrive.google.com%2Ffolderview%3Fid%3D1eSqX7wZP1r77hD84wDmGAQSI0Tqbn9xm=04%7C01%7C%7C42e73c098a354db82b9908d8ea601943%7C84df9e7fe9f640afb435%7C1%7C0%7C637517045750264526%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000=NDktts%2F8biFhQEV%2BW1W3sb8eloyphFVguDc8ZagV%2Fvc%3D=0> I pretty sure the next question is going to be "how much?" ~1k for each rod and hardware. I have 4 shrouds on each side plus head and back. 10 total ~3k for the paint job alone All said and done it came to roughly 20k Josh Muckley S/V Sea Hawk 1989 C 37+ Solomons, MD On Thu, Mar 18, 2021, 10:19 David Swensen mailto:ka123dswense...@gmail.com>> wrote: Josh, Lets talk about your mast and spreaders. What did you use to paint them? They look great. On Thu, Mar 18, 2021 at 9:54 AM Josh Muckley via CnC-List mailto:cnc-list@cnc-list.com>> wrote: I replaced my Aqua Signal with the marine beam. Perfect replacement fit. No problem. Highly recommend. I also did Aqua Signal LEDs on the spreaders. Very low profile and they work phenomenally - almost too bright! https://store.marinebeam.com/led-masthead-foredeck-combination-light/<https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fstore.marinebeam.com%2Fled-masthead-foredeck-combination-light%2F=04%7C01%7C%7C42e73c098a354db82b9908d8ea601943%7C84df9e7fe9f640afb435%7C1%7C0%7C637517045750274485%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000=T6W54UY7gaotxsAAUaczlBNnR4w1Hf15H%2Fu%2BLzjydxY%3D=0> https://drive.google.com/file/d/1CdFzOH89I3fwlZeumTcWlLxQGST9Mn_S/view?usp=drivesdk<https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fdrive.google.com%2Ffile%2Fd%2F1CdFzOH89I3fwlZeumTcWlLxQGST9Mn_S%2Fview%3Fusp%3Ddrivesdk=04%7C01%7C%7C42e73c098a354db82b9908d8ea601943%7C84df9e7fe9f640afb435%7C1%7C0%7C637517045750274485%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000=%2BwW06ZTxAjMWQonasbValZGCDr2boKyZpqwZCdKy42g%3D=0> https://drive.google.com/file/d/1gIzwa9aDe-08QwoXbRkiSKvJpeaHpOkU/view?usp=drivesdk<https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fdrive.google.com%2Ffile%2Fd%2F1gIzwa9aDe-08QwoXbRkiSKvJpeaHpOkU%2Fview%3Fusp%3Ddrivesdk=04%7C01%7C%7C42e73c098a354db82b9908d8ea601943%7C84df9e7fe9f640afb435%7C1%7C0%7C637517045750274485%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000=H6taArNg3R4JZXamPcY452gaDRT0K6WTU%2BgQ9Ob4CWo%3D=0> https://drive.google.com/file/d/1ZQiyoFpaXQ5qMJ82CfCZY1GUoUKmx-MM/view?usp=drivesd
Stus-List Re: Recommended Masthead/Deck Light combo replacement [now mast rebuild]
Canadian Silver coin with a nautical theme and minted the same year as my boat was built. https://www.ebay.com/itm/Royal-Canadian-Mint-1-Silver-Dollar-MacKenzie-River-Exploration-/333860863439?_trksid=p2349624.m46890.l49292 No not particularly superstitious but I figured for the relatively low cost and low effort this little bit of superstition was worth it. Josh Muckley S/V Sea Hawk 1989 C 37+ Solomons, MD On Thu, Mar 18, 2021, 16:39 Bill Coleman via CnC-List wrote: > Wow, is that a Silver Dollar on your mast step, or just a Looney? You > must be superstitious. > > > > > > Bill Coleman > > Entrada, Erie, PA > > > > > > > > *From:* Josh Muckley via CnC-List [mailto:cnc-list@cnc-list.com] > *Sent:* Thursday, March 18, 2021 10:46 AM > *Cc:* Stus-List; Josh Muckley > *Subject:* Stus-List Re: Recommended Masthead/Deck Light combo > replacement [now mast rebuild] > > > > The yard used awlgrip 2000, pearl gray if I recall correctly. Stripped > all hardware and wiring, welded shut vestigial holes, ground them flat and > then primed and painted. Re-wired, refitted, replaced all rod rigging. > > > > Here is the link to the whole project. > > https://drive.google.com/folderview?id=1eSqX7wZP1r77hD84wDmGAQSI0Tqbn9xm > > > > I pretty sure the next question is going to be "how much?" > > > > ~1k for each rod and hardware. I have 4 shrouds on each side plus head > and back. 10 total > > > > ~3k for the paint job alone > > > > All said and done it came to roughly 20k > > > > Josh Muckley > > S/V Sea Hawk > > 1989 C 37+ > > Solomons, MD > > > > On Thu, Mar 18, 2021, 10:19 David Swensen > wrote: > > Josh, Lets talk about your mast and spreaders. What did you use to paint > them? They look great. > > > > On Thu, Mar 18, 2021 at 9:54 AM Josh Muckley via CnC-List < > cnc-list@cnc-list.com> wrote: > > I replaced my Aqua Signal with the marine beam. Perfect replacement fit. > No problem. Highly recommend. I also did Aqua Signal LEDs on the > spreaders. Very low profile and they work phenomenally - almost too bright! > > > > https://store.marinebeam.com/led-masthead-foredeck-combination-light/ > > > > > https://drive.google.com/file/d/1CdFzOH89I3fwlZeumTcWlLxQGST9Mn_S/view?usp=drivesdk > > > > > https://drive.google.com/file/d/1gIzwa9aDe-08QwoXbRkiSKvJpeaHpOkU/view?usp=drivesdk > > > > > https://drive.google.com/file/d/1ZQiyoFpaXQ5qMJ82CfCZY1GUoUKmx-MM/view?usp=drivesdk > > > > > https://drive.google.com/file/d/1C9XMVAymHLr3240v5wFePlXiVGKJG6VS/view?usp=drivesdk > > > > > > All the best, > > > > Josh Muckley > > S/V Sea Hawk > > 1989 C 37+ > > Solomons, MD > > > > > > On Thu, Mar 18, 2021, 08:55 Danny Haughey via CnC-List < > cnc-list@cnc-list.com> wrote: > > Hello all, > > > > I need to replace my masthead (steaming)/Deck Light. The existing Aqua > Signal light doesn't impress me as the deck light lens fell off at some > point and the deck light didn't work. So, Staying away from Aqua Signal. > > > > I've been looking and these light range in price from around $100 all the > way up to well over $500. I've seem Marine Beam, with good reviews, at > about $125 and the Signal Mate, with good reviews at about $450. > > > > I don't want to spend unnecessarily but, I'm leaning toward the Signal > Mate. It was good reputation, been around a while and is supposed to be > well made. Of course the reviews on the Marine beam say they are well > made. There are plenty of bad reviews about the aqua signal. > > > > I was hoping some of you could offer some experiences and advise. > > > > Thanks, > > Danny > > Thanks to all of the subscribers that contributed to the list to help with > the costs involved. If you want to show your support to the list - use > PayPal to send contribution -- https://www.paypal.me/stumurray Thanks > - Stu > > Thanks to all of the subscribers that contributed to the list to help with > the costs involved. If you want to show your support to the list - use > PayPal to send contribution -- https://www.paypal.me/stumurray Thanks > - Stu > > Thanks to all of the subscribers that contributed to the list to help with > the costs involved. If you want to show your support to the list - use > PayPal to send contribution -- https://www.paypal.me/stumurray Thanks > - Stu Thanks to all of the subscribers that contributed to the list to help with the costs involved. If you want to show your support to the list - use PayPal to send contribution -- https://www.paypal.me/stumurray Thanks - Stu
Stus-List Re: Recommended Masthead/Deck Light combo replacement [now mast rebuild]
Wow, is that a Silver Dollar on your mast step, or just a Looney? You must be superstitious. Bill Coleman Entrada, Erie, PA From: Josh Muckley via CnC-List [mailto:cnc-list@cnc-list.com] Sent: Thursday, March 18, 2021 10:46 AM Cc: Stus-List; Josh Muckley Subject: Stus-List Re: Recommended Masthead/Deck Light combo replacement [now mast rebuild] The yard used awlgrip 2000, pearl gray if I recall correctly. Stripped all hardware and wiring, welded shut vestigial holes, ground them flat and then primed and painted. Re-wired, refitted, replaced all rod rigging. Here is the link to the whole project. <https://drive.google.com/folderview?id=1eSqX7wZP1r77hD84wDmGAQSI0Tqbn9xm> https://drive.google.com/folderview?id=1eSqX7wZP1r77hD84wDmGAQSI0Tqbn9xm I pretty sure the next question is going to be "how much?" ~1k for each rod and hardware. I have 4 shrouds on each side plus head and back. 10 total ~3k for the paint job alone All said and done it came to roughly 20k Josh Muckley S/V Sea Hawk 1989 C 37+ Solomons, MD On Thu, Mar 18, 2021, 10:19 David Swensen wrote: Josh, Lets talk about your mast and spreaders. What did you use to paint them? They look great. On Thu, Mar 18, 2021 at 9:54 AM Josh Muckley via CnC-List wrote: I replaced my Aqua Signal with the marine beam. Perfect replacement fit. No problem. Highly recommend. I also did Aqua Signal LEDs on the spreaders. Very low profile and they work phenomenally - almost too bright! https://store.marinebeam.com/led-masthead-foredeck-combination-light/ https://drive.google.com/file/d/1CdFzOH89I3fwlZeumTcWlLxQGST9Mn_S/view?usp=drivesdk https://drive.google.com/file/d/1gIzwa9aDe-08QwoXbRkiSKvJpeaHpOkU/view?usp=drivesdk https://drive.google.com/file/d/1ZQiyoFpaXQ5qMJ82CfCZY1GUoUKmx-MM/view?usp=drivesdk https://drive.google.com/file/d/1C9XMVAymHLr3240v5wFePlXiVGKJG6VS/view?usp=drivesdk All the best, Josh Muckley S/V Sea Hawk 1989 C 37+ Solomons, MD On Thu, Mar 18, 2021, 08:55 Danny Haughey via CnC-List wrote: Hello all, I need to replace my masthead (steaming)/Deck Light. The existing Aqua Signal light doesn't impress me as the deck light lens fell off at some point and the deck light didn't work. So, Staying away from Aqua Signal. I've been looking and these light range in price from around $100 all the way up to well over $500. I've seem Marine Beam, with good reviews, at about $125 and the Signal Mate, with good reviews at about $450. I don't want to spend unnecessarily but, I'm leaning toward the Signal Mate. It was good reputation, been around a while and is supposed to be well made. Of course the reviews on the Marine beam say they are well made. There are plenty of bad reviews about the aqua signal. I was hoping some of you could offer some experiences and advise. Thanks, Danny Thanks to all of the subscribers that contributed to the list to help with the costs involved. If you want to show your support to the list - use PayPal to send contribution -- https://www.paypal.me/stumurray Thanks - Stu Thanks to all of the subscribers that contributed to the list to help with the costs involved. If you want to show your support to the list - use PayPal to send contribution -- https://www.paypal.me/stumurray Thanks - Stu Thanks to all of the subscribers that contributed to the list to help with the costs involved. If you want to show your support to the list - use PayPal to send contribution -- https://www.paypal.me/stumurray Thanks - Stu
Stus-List Re: Recommended Masthead/Deck Light combo replacement [now mast rebuild]
Josh, Great Jobmy next question is what was the process for measuring and procuring the replacement rod materials? Did the Yard do it, or a rigger in teharea, or other? Thanks, Ron C. Impromptu 38MKIIC ‘77 From: Josh Muckley via CnC-List Sent: Thursday, March 18, 2021 10:46 AM Cc: Stus-List ; Josh Muckley Subject: Stus-List Re: Recommended Masthead/Deck Light combo replacement [now mast rebuild] The yard used awlgrip 2000, pearl gray if I recall correctly. Stripped all hardware and wiring, welded shut vestigial holes, ground them flat and then primed and painted. Re-wired, refitted, replaced all rod rigging. Here is the link to the whole project. <https://drive.google.com/folderview?id=1eSqX7wZP1r77hD84wDmGAQSI0Tqbn9xm> https://drive.google.com/folderview?id=1eSqX7wZP1r77hD84wDmGAQSI0Tqbn9xm I pretty sure the next question is going to be "how much?" ~1k for each rod and hardware. I have 4 shrouds on each side plus head and back. 10 total ~3k for the paint job alone All said and done it came to roughly 20k Josh Muckley S/V Sea Hawk 1989 C 37+ Solomons, MD On Thu, Mar 18, 2021, 10:19 David Swensen mailto:ka123dswense...@gmail.com> > wrote: Josh, Lets talk about your mast and spreaders. What did you use to paint them? They look great. On Thu, Mar 18, 2021 at 9:54 AM Josh Muckley via CnC-List mailto:cnc-list@cnc-list.com> > wrote: I replaced my Aqua Signal with the marine beam. Perfect replacement fit. No problem. Highly recommend. I also did Aqua Signal LEDs on the spreaders. Very low profile and they work phenomenally - almost too bright! https://store.marinebeam.com/led-masthead-foredeck-combination-light/ https://drive.google.com/file/d/1CdFzOH89I3fwlZeumTcWlLxQGST9Mn_S/view?usp=drivesdk https://drive.google.com/file/d/1gIzwa9aDe-08QwoXbRkiSKvJpeaHpOkU/view?usp=drivesdk https://drive.google.com/file/d/1ZQiyoFpaXQ5qMJ82CfCZY1GUoUKmx-MM/view?usp=drivesdk https://drive.google.com/file/d/1C9XMVAymHLr3240v5wFePlXiVGKJG6VS/view?usp=drivesdk All the best, Josh Muckley S/V Sea Hawk 1989 C 37+ Solomons, MD On Thu, Mar 18, 2021, 08:55 Danny Haughey via CnC-List mailto:cnc-list@cnc-list.com> > wrote: Hello all, I need to replace my masthead (steaming)/Deck Light. The existing Aqua Signal light doesn't impress me as the deck light lens fell off at some point and the deck light didn't work. So, Staying away from Aqua Signal. I've been looking and these light range in price from around $100 all the way up to well over $500. I've seem Marine Beam, with good reviews, at about $125 and the Signal Mate, with good reviews at about $450. I don't want to spend unnecessarily but, I'm leaning toward the Signal Mate. It was good reputation, been around a while and is supposed to be well made. Of course the reviews on the Marine beam say they are well made. There are plenty of bad reviews about the aqua signal. I was hoping some of you could offer some experiences and advise. Thanks, Danny Thanks to all of the subscribers that contributed to the list to help with the costs involved. If you want to show your support to the list - use PayPal to send contribution -- https://www.paypal.me/stumurray Thanks - Stu Thanks to all of the subscribers that contributed to the list to help with the costs involved. If you want to show your support to the list - use PayPal to send contribution -- https://www.paypal.me/stumurray Thanks - Stu Thanks to all of the subscribers that contributed to the list to help with the costs involved. If you want to show your support to the list - use PayPal to send contribution -- https://www.paypal.me/stumurray Thanks - Stu
Stus-List Re: Recommended Masthead/Deck Light combo replacement [now mast rebuild]
The yard used awlgrip 2000, pearl gray if I recall correctly. Stripped all hardware and wiring, welded shut vestigial holes, ground them flat and then primed and painted. Re-wired, refitted, replaced all rod rigging. Here is the link to the whole project. https://drive.google.com/folderview?id=1eSqX7wZP1r77hD84wDmGAQSI0Tqbn9xm I pretty sure the next question is going to be "how much?" ~1k for each rod and hardware. I have 4 shrouds on each side plus head and back. 10 total ~3k for the paint job alone All said and done it came to roughly 20k Josh Muckley S/V Sea Hawk 1989 C 37+ Solomons, MD On Thu, Mar 18, 2021, 10:19 David Swensen wrote: > Josh, Lets talk about your mast and spreaders. What did you use to paint > them? They look great. > > On Thu, Mar 18, 2021 at 9:54 AM Josh Muckley via CnC-List < > cnc-list@cnc-list.com> wrote: > >> I replaced my Aqua Signal with the marine beam. Perfect replacement >> fit. No problem. Highly recommend. I also did Aqua Signal LEDs on the >> spreaders. Very low profile and they work phenomenally - almost too bright! >> >> https://store.marinebeam.com/led-masthead-foredeck-combination-light/ >> >> >> https://drive.google.com/file/d/1CdFzOH89I3fwlZeumTcWlLxQGST9Mn_S/view?usp=drivesdk >> >> >> https://drive.google.com/file/d/1gIzwa9aDe-08QwoXbRkiSKvJpeaHpOkU/view?usp=drivesdk >> >> >> https://drive.google.com/file/d/1ZQiyoFpaXQ5qMJ82CfCZY1GUoUKmx-MM/view?usp=drivesdk >> >> >> https://drive.google.com/file/d/1C9XMVAymHLr3240v5wFePlXiVGKJG6VS/view?usp=drivesdk >> >> >> All the best, >> >> Josh Muckley >> S/V Sea Hawk >> 1989 C 37+ >> Solomons, MD >> >> >> On Thu, Mar 18, 2021, 08:55 Danny Haughey via CnC-List < >> cnc-list@cnc-list.com> wrote: >> >>> Hello all, >>> >>> I need to replace my masthead (steaming)/Deck Light. The existing Aqua >>> Signal light doesn't impress me as the deck light lens fell off at some >>> point and the deck light didn't work. So, Staying away from Aqua Signal. >>> >>> I've been looking and these light range in price from around $100 all >>> the way up to well over $500. I've seem Marine Beam, with good reviews, at >>> about $125 and the Signal Mate, with good reviews at about $450. >>> >>> I don't want to spend unnecessarily but, I'm leaning toward the Signal >>> Mate. It was good reputation, been around a while and is supposed to be >>> well made. Of course the reviews on the Marine beam say they are well >>> made. There are plenty of bad reviews about the aqua signal. >>> >>> I was hoping some of you could offer some experiences and advise. >>> >>> Thanks, >>> Danny >>> Thanks to all of the subscribers that contributed to the list to help >>> with the costs involved. If you want to show your support to the list - >>> use PayPal to send contribution -- https://www.paypal.me/stumurray >>> Thanks - Stu >> >> Thanks to all of the subscribers that contributed to the list to help >> with the costs involved. If you want to show your support to the list - >> use PayPal to send contribution -- https://www.paypal.me/stumurray >> Thanks - Stu > > Thanks to all of the subscribers that contributed to the list to help with the costs involved. If you want to show your support to the list - use PayPal to send contribution -- https://www.paypal.me/stumurray Thanks - Stu
