Re: [Cooker] How can I get rid of cups ?
Thanks for the quick reply! Am Montag 13 November 2000 11:38 schrieben Sie: Try one of the following things (I do not know whether all points really work exactly as described here): - Run CUPS and LPD in parallel by letting CUPS as is and installing the lpr and rhs-printfilters packages. Use "printerdrake -expert" or "printerdrake -lpr". In this case the LPD printing commands are "lpr-lpd", "lpq-lpd", "lprm-lpd", and "lpc-lpd". I succeded with this way (CUPS + LPD). Your hint "printerdrake -lpr" helped me to build a seperate lpr-printer with the correspondend rhs-printfilter. - CUPS can emulate LPD, see http://localhost:631/sam.html or http://www.cups.org/sam.html (CUPS-LPD mini-daemon). I did not succeed with the CUPS-MINI-daemon. Maybe I did not set up correctly. But I have it working with the first way. - Run only LPD by removing CUPS, installing lpr and rhs-printfilters and using "printerdrake -expert" or "printerdrake -lpr". I did not try this, it would be the worst solution to my oppinion. - If you want to use the "printtool", it is in the contribs. Till "W.Kasberg" wrote: Mandrake7.2 came up with cups printing system. Under linux it is ok an works fine. But I am using WinNT via vmware (version 2.03) on an existing partition and I cannot print from WInNt to my locally connected printer (lpt1, HPLaserjet1100) neither directly to /dev/lp0 resp. /dev/parport0 or via lpr/lpd printing system. Therefore I want to remove cups from my system and go back to lpr system. But I cannot manage this. Even when I have removed cups from my system, on installing new printer I am asked for cups. How can I manage this? Thanks for any hint. W. Kasberg W. Kasberg -- +- ! Dr.-Ing. Walter Kasberg ! Lehrstuhl fuer Flugdynamik ! ! RWTH Aachen Templergraben 55D-52056 Aachen ! ! Tel. +49-241-80 6812 Fax +49-241-80 99529 ! ! e-mail [EMAIL PROTECTED] +-
RE: [Cooker] CUPS Failure
Title: RE: [Cooker] CUPS Failure Your suggestion was correct, cable where OK just playing with the BIOS setup and setting the PCI card interrupts/wait states fixed the problem. CUPS works fine. Many thanks Paul Godin -Original Message- From: Till Kamppeter [mailto:[EMAIL PROTECTED]] Sent: Sunday, November 12, 2000 10:44 To: [EMAIL PROTECTED]; Godin, Paul Subject: Re: [Cooker] CUPS Failure I have posted your problem on the Canon forum of linuxprinting.org. Here is the answer of Grant Taylor: Hmm. I've observe thee exact effects with my 4200, but the problem then was a bad wire. I'd suggest that he fiddle with tunelp first - change to interrupt-driven, or shorten the poll time, or something like that. This printer really should not suffer from any load or cups-related host problems like this seems to describe. Godin, Paul wrote: Bonjour all, CUPS on Mandrake 7.2 is giving me serious printing problems. I have a CANON BJC-4200 printer. It initially starts printing OK, then stall for a few seconds followed by weird ASCII characters, form feed, more stalling and so on. Essentially I can't print anymore. Never had this problems before with LPR. Is it timing problem, the printer works fine on the other OS. If you recommend replacing CUPS with LPR then how do I do that?. Thanks Paul Godin
Re: [Cooker] CUPS: Back in Cooker again!
Till Kamppeter wrote: Now you can print out of the Cooker version again, and I hope that you will comment on any problem and give many contributions to make the printing system even better in the next release of Mandrake. Till, Lots of CUPS problems to report with 7.2 and an HP 970Cxi printer using the HP Deskjet 970C, Foomatic + cdj970 driver. Worked well until I tried to print from Adobe Acrobat 4 (acroread) - silence. General Question: Why is not Adobe Acrobat installed as standard by Mandrake? Tried also to print from Mandrake's ps and pdf viewer - silence. These all attempt to spool via lpr. I understood CUPS intercepted all such attempts? After this all CUPs became inaccesible, requiring a user name and password to do anything, which it always rejected. Problem disappeared after uninstalling all cups RPMs and reinstalling them from the CDs. -- Regards, Ron. [AU]
Re: [Cooker] PCMCIA thinks ttyS2 is the CD-ROM !!!
OS [EMAIL PROTECTED] writes: Something wrong ? I do hope so, or my system has a strange configuration ! :-) try with supermount disabled. -- MandrakeSoft Inc http://www.chmouel.org --Chmouel
[Cooker] WARNING: CUPS on Cooker
Oi, PLEASE DO NOT INSTALL THE CURRENT COOKER AS YOUR ONLY OPERATING SYSTEM WHEN YOU WANT TO PRINT!!! As most of you already know, the current Cooker uses gcc 2.96 and new standard libraries, so it is not binary-compatible to Linux Mandrake 7.2. Unfortunately, CUPS does not compile in the new environment, and due to some configuration issues which I have to fix for 7.2, I cannot fix the compiling of CUPS soon. Note that Cooker is intended to be a development and testing version of Linux Mandrake and that it is not suitable as a production environment. WE HAVE A LOT OF PROBLEMS WITH GCC 2.96. If you want to help us in the development of printing, please use Mandrake 7.2. Naturally every hint to get CUPS compiled with gcc 2.96 is welcome. Till
[Cooker] KDE and swedish
I have been testing 7.2 and discovered that if I install with Swedish then KDE doesnt work at all. The min, max and close boxes are missing and kde segfaults all the time. Also no Icons are shown on the desktop. Installing with english works fine. kenneth
[Cooker] PCMCIA thinks ttyS2 is the CD-ROM !!!
Hello,
Errrmmm ! It appears that kernel-pcmcia-cs-2.2.17-25mdk thinks that the device
on ttyS2 is the CD !!!
When the system shuts down it performs
/etc/pcmcia/serial check ttyS2
this causes the CD to click and the following output appears at the console:
hdc: packet command error: status=0x51 {DriveReady SeekComplete Error}
hdc: packet command error: error=0x50
ATAPI device hdc:
Error: Illegal request -- (Sense key=0x05)
Invalid field in command packet -- (asc=0x24, ascq=0x00)
The failed "Start/Stop Unit" packet command was:
"1b 00 00 00 03 00 00 00 00 00 00 00 "
Error in command packet byte 4 bit 0
Something wrong ? I do hope so, or my system has a strange configuration ! :-)
Owen
Re: [Cooker] WP2000 and Fonttastic
Oh yes it does. But you need to change the FontPath's for XFree86-4.n. Try putting : FontPath "tcp/127.0.0.1:7102" FontPath "tcp/:7102" into your XF86Config file. (or should that be FontPath "inet/127.0.0.1:7101" FontPath "unix/:7101" I can never remember which is for fonttastic and which is for xfstt !!! ) If you think it's a bit overkill having two lots of each defined, remove them one at a time until it stops working :-) Owen On Tue, 14 Nov 2000, you wrote: WordPerfect 2000 does not function with Mandrake 7.2 The FontTastic daemon is not available, attempted load it with supplied rpm but that failed due to conflict with the initscript shell in /etc. Worked fine under 7.1 before. Corel was contacted and waiting for a reply. Paul Godin Content-Type: text/html; name="unnamed" Content-Transfer-Encoding: 7bit Content-Description:
[Cooker] CUPS: Back in Cooker again!
Oi, with the help of Chmouel I got the CUPS package compiled under the new GCC 2.96. The problem was a "-O2 -O3" (both at the same time!) defined as compiler optimization options by the CUPS authors. This worked with all former gcc's and the compilers of all commercial Unixes, gcc 2.96 is the first having problems with this senseless setting. Because the Makefiles of CUPS hide the compiler command line I didn't see it. Now you can print out of the Cooker version again, and I hope that you will comment on any problem and give many contributions to make the printing system even better in the next release of Mandrake. Till
[Cooker] anacron and msec problem
Anacron tries to email the output of cron.daily and it assumes that sendmail is present on the system. Perhaps it should use procmail or at least have the choice of procmail or sendmail. Also I seem to remember one or more of the msec security scripts having the same problem but I cant prove it right now. -- - Antony Suter ([EMAIL PROTECTED]) "Examiner" openpgp:71ADFC87 - "And how do you store the nuclear equivalent of the universal - solvent?"
Re: [Cooker] old libstdc++ dependancies still?
On Tuesday 14 November 2000 06:50, you wrote: I hate to keep harping on about this but this issue appears to have stagnated. Is there any effort being put into recompiling everything that is still dependant on libstdc++-2.95.2-12mdk? Those of us that want to upgrade our favorite packages that have already been compiled with and are dependant on libstdc++-2.96-0.15mdk can't. Well not without shoehorning them in with a --nodeps and making a symlink anyway. Any progress update would be much appreciated. Thanx, b. don't u c ? there is now only 53 packages that depends on the old lib . there have also a lot of others works like with the new glibc and the most confusing is the new gcc you think peoples @ mandrake are robot ? -o they works , I'm sure ... But I don't know if they sleep enought ;-)
Re: [Cooker] Boot disk for 7.2, patchlevel (pl) 1
Chmouel Boudjnah [EMAIL PROTECTED] writes: [EMAIL PROTECTED] writes: The boot disk stops when it reaches ide2 IRQ 10 which is the interrupt for the Promise card. do you mean that the cd boot (old version) and the floppy disk doen't ? He probably means that nothing works in the 7.2 (install, rescue, new boot disk). Is that right Jud? -- Guillaume Cottenceau -- Distribution Developer for MandrakeSoft http://us.mandrakesoft.com/~gc/
Re: [Cooker] incomplete install - can't set root password
paul [EMAIL PROTECTED] writes: [...] I used Tom's rescue boot disk to get into the system and configure LILO FYI you can boot on the cdrom and type "rescue", this is a rescue system. Pretty good. With reiserfs and local keyboards and whatever. [...] However, upon rebooting the stupid computer wouldn't accept the new passwd when I tried to log in (and no, it ain't a caps problem :o) ). Nor a locale keyboard? Fine. So I booted into single mode again and took out the password from root's entry in the /etc/passwd file. Rebooted the machine. This time when I entered root as the user name it was rejected immediately. No chance to put in the password. Security level issue? -- Guillaume Cottenceau -- Distribution Developer for MandrakeSoft http://us.mandrakesoft.com/~gc/
Re: [Cooker] Menu woes solved by youll never guess....
Armisis Aieoln [EMAIL PROTECTED] writes: I was slowly trying to get my menus setup system wide for all my apps... just cause they released 7.2 support at helixcode, I got it it fixed my menu problem weird huh Sorry? -- Guillaume Cottenceau -- Distribution Developer for MandrakeSoft http://us.mandrakesoft.com/~gc/
[Cooker] Need help: HP Pavilion 5195 Laptop
Has anyone in "cooker-land" gotten the HP Pavilion 5195 or 5100 series laptops to work in X? If so please share your secret? Here's what I can find on the chipset: Monitor is a 15" LCD panel, but the standard SVGA settings should work. The adapter is a S3, Inc. 862270-294 Savage /MX -/IX (DISPAY_VGA Card: S3 Savage (Generic)) Chip ID is: 0x8c12 rev. 11 Clocks: 25.18 I have tried both X 3 and 4 no luck. Can anyone tell me what I can do to even get a generic X 800x600 session running on this machine? I would be happy with the FB server that runs and looks decent on install at this point. Thanks, Chris
[Cooker] small question about XMMS .
Hi all , I wanna tell u about Arts sound problems . By default XMMS doesn't use Arts to output sound (u have to add xmms - aRts plugins) so when for example u use Licq . Licq doesn't get the possibility to play sound so it will queues all sound and play them a moment after XMMs is stoped . could this issue resolved or put the arts plugin fo XMMS ?
Re: [Cooker] small question about XMMS .
Meir Faraj [EMAIL PROTECTED] writes: Hi all , I wanna tell u about Arts sound problems . By default XMMS doesn't use Arts to output sound (u have to add xmms - aRts plugins) so when for example u use Licq . Licq doesn't get the possibility to play sound so it will queues all sound and play them a moment after XMMs is stoped . could this issue resolved or put the arts plugin fo XMMS ? We have it in the contribs. It will be moved to main soon. However please notice that when you use the menu entry it runs "soundwrapper xmms" which expands to "artsdsp xmms" when artsd is running. This way, it works as you want I guess. -- Guillaume Cottenceau -- Distribution Developer for MandrakeSoft http://us.mandrakesoft.com/~gc/
[Cooker] glibwww missing from cooker
What the difference between glibwww and libglibwww1 ? I cant compile gtkhtml without glibwww, but only libglibwww1 is in cooker. -- - Antony Suter ([EMAIL PROTECTED]) "Examiner" openpgp:71ADFC87 - "And how do you store the nuclear equivalent of the universal - solvent?"
Re: [Cooker] Menu woes solved by youll never guess....
On Tuesday 14 November 2000 11:32, you wrote: Armisis Aieoln [EMAIL PROTECTED] writes: I was slowly trying to get my menus setup system wide for all my apps... just cause they released 7.2 support at helixcode, I got it it fixed my menu problem weird huh Sorry? Hey thats what software testing is all about GRIN thats why i am always running test software, cause I love the challange of trying to get it working, and I get overly excited when things do work GRIN... dave -- -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- Linux - Cause I dont do windows or ovens! [EMAIL PROTECTED] [EMAIL PROTECTED] [EMAIL PROTECTED] [EMAIL PROTECTED] [EMAIL PROTECTED] -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- Registered System: 83659
Re: [Cooker] glibwww missing from cooker
Antony Suter [EMAIL PROTECTED] writes: What the difference between glibwww and libglibwww1 ? I cant compile gtkhtml without glibwww, but only libglibwww1 is in cooker. This package was renamed by the maintainer (Fred Crozat) : [daouda@kenobi daouda]$ rpm -qp /RPMS/libglibwww1-0.2-2mdk.i586.rpm --changelog |head -10 * Mon Nov 06 2000 Frederic Crozat [EMAIL PROTECTED] 0.2-2mdk - Add missing dependency of devel on w3c-libwww-devel - Rename packages ^^ * Wed Oct 25 2000 Frederic Crozat [EMAIL PROTECTED] 0.2-1mdk - First Mandrake package [daouda@kenobi daouda]$ so you should pass libglibwww instead of glibwww. -- - Antony Suter ([EMAIL PROTECTED]) "Examiner" openpgp:71ADFC87 - "And how do you store the nuclear equivalent of the universal - solvent?"
Re: [Cooker] small question about XMMS .
On Tuesday 14 November 2000 14:08, you wrote: Meir Faraj [EMAIL PROTECTED] writes: Hi all , I wanna tell u about Arts sound problems . By default XMMS doesn't use Arts to output sound (u have to add xmms - aRts plugins) so when for example u use Licq . Licq doesn't get the possibility to play sound so it will queues all sound and play them a moment after XMMs is stoped . could this issue resolved or put the arts plugin fo XMMS ? We have it in the contribs. It will be moved to main soon. However please notice that when you use the menu entry it runs "soundwrapper xmms" which expands to "artsdsp xmms" when artsd is running. This way, it works as you want I guess. why then when you run Licq it could not got sound ? this is so an Licq problems ;-(
Re: [Cooker] glibwww missing from cooker
Daouda LO wrote: Antony Suter [EMAIL PROTECTED] writes: What the difference between glibwww and libglibwww1 ? I cant compile gtkhtml without glibwww, but only libglibwww1 is in cooker. This package was renamed by the maintainer (Fred Crozat) : [snip] so you should pass libglibwww instead of glibwww. Yes I installed libglibwww1. I had to add --nodeps to my gtkhtml rebuild. -- - Antony Suter ([EMAIL PROTECTED]) "Examiner" openpgp:71ADFC87 - "And how do you store the nuclear equivalent of the universal - solvent?"
Re: [Cooker] small question about XMMS .
Meir Faraj [EMAIL PROTECTED] writes: On Tuesday 14 November 2000 14:08, you wrote: Meir Faraj [EMAIL PROTECTED] writes: Hi all , I wanna tell u about Arts sound problems . By default XMMS doesn't use Arts to output sound (u have to add xmms - aRts plugins) so when for example u use Licq . Licq doesn't get the possibility to play sound so it will queues all sound and play them a moment after XMMs is stoped . could this issue resolved or put the arts plugin fo XMMS ? We have it in the contribs. It will be moved to main soon. However please notice that when you use the menu entry it runs "soundwrapper xmms" which expands to "artsdsp xmms" when artsd is running. This way, it works as you want I guess. why then when you run Licq it could not got sound ? this is so an Licq problems ;-( Geoffrey? -- Guillaume Cottenceau -- Distribution Developer for MandrakeSoft http://us.mandrakesoft.com/~gc/
[Cooker] Another xmms small proposition .
Hi all , I've saw there is an Xmms - avi (0.6a version) that plays other formats like asf , divx.;-),... it will be a good things to see xmms playing more formats it use the libavifile library so u could made it afvaible for it with the utilitities we've spoke a month ago (About playing windows media?(And others)) . it could be nice to have possibility to use xmms with a lot of codecs ;-) it will make a lot of people that use the fact that linux doesn't suport all media to pass to linux. if more people use linux it will I hopes change the mind of a lot of socitie to support linux , that will be a good things ;-) I for my parts , ask with friend to see why they won't use linux , search for solution and try to tell u them ;-) hopes it help. Thanks a lot
[Cooker] Mozilla segfault at install
I just tried to install mozilla-5.0.0-0.M18.4mdk.i586.rpm on a fresh 7.2 I upgraded libstdc++, glibc and rpm, but every installation attempt fails with a core dump message after the last #. Installation scripts only consist of updating menu, so i don't think the problem comes from here. -- Guillaume Rousse Murphy's law : If anything can go wrong, it will. O'Tool's commentary : Murphy was an optimist.
[Cooker] WP2000 and Fonttastic
Title: WP2000 and Fonttastic WordPerfect 2000 does not function with Mandrake 7.2 The FontTastic daemon is not available, attempted load it with supplied rpm but that failed due to conflict with the initscript shell in /etc. Worked fine under 7.1 before. Corel was contacted and waiting for a reply. Paul Godin
Re: [Cooker] Another xmms small proposition .
Meir Faraj [EMAIL PROTECTED] writes: Hi all , I've saw there is an Xmms - avi (0.6a version) that plays other formats like asf , divx.;-),... it will be a good things to see xmms playing more formats it use the libavifile library so u could made it afvaible for it with the utilitities we've spoke a month ago (About playing windows media?(And others)) . Last time I checked, it needed closed-source DLL's. -- Guillaume Cottenceau -- Distribution Developer for MandrakeSoft http://us.mandrakesoft.com/~gc/
Re: [Cooker] WP2000 and Fonttastic
WordPerfect 2000 does not function with Mandrake 7.2 The FontTastic daemon is not available, attempted load it with supplied rpm but that failed due to conflict with the initscript shell in /etc. Worked fine under 7.1 before. Corel was contacted and waiting for a reply. Paul, I'd sure like to hear their solution to this problem. Cheers --- Larry
Re: [Cooker] WP2000 and Fonttastic
You wrote: WordPerfect 2000 does not function with Mandrake 7.2 The FontTastic daemon is not available, attempted load it with supplied rpm but that failed due to conflict with the initscript shell in /etc. Worked fine under 7.1 before. Corel was contacted and waiting for a reply. Paul, I'd sure like to hear their solution to this problem. The solution is to get them to fix their braindead scripts (some of them are even c shell scripts!). Their Word Perfect script (or one of them) is also broken (even though Posix explicitly states that one may not assume that uname returns any particular format, they rely on the kernel version being a number (of course Mandrake appens mdk, so that breaks that)). Anyway rpm -qp --scripts nameof.rpm will show you clearly that their script is broken. Just install rpm -i --force --noscripts, and then from /etc/rc.d/init.d copy into the runlevels (e.g., /etc/rc.d/rc5.d) if you want to run on startup [remember you'll have to rename the copied file in each runlevel to something like S50fontastic]. -- Random fortune Do you know Montana?
Re: [Cooker] Another xmms small proposition .
On Tuesday 14 November 2000 16:10, you wrote: Meir Faraj [EMAIL PROTECTED] writes: Hi all , I've saw there is an Xmms - avi (0.6a version) that plays other formats like asf , divx.;-),... it will be a good things to see xmms playing more formats it use the libavifile library so u could made it afvaible for it with the utilitities we've spoke a month ago (About playing windows media?(And others)) . Last time I checked, it needed closed-source DLL's. but you could like I've said use windows dll's (like u already make for ttf font;-)) and this one is justly to enable support for external proprietary codecs like asf. I think you will never have open sourced dlls or codecs for these one , u know why;-) but , it will be pleasant to use them..
[Cooker] BIG problem for KDE developers on Mandrake 7.2
I've noticed that kdbg-1.1.4-7mdk segfaults immediately after starting, do you? After a little bit investigation I've discovered that: [root@pset40]# ldd /usr/bin/kdbg | grep qt libqt.so.1 = /usr/lib/libqt.so.1 (0x404e3000) libqt.so.2 = /usr/lib/libqt.so.2 (0x409df000) That have no sense! Specifically because kdbg spec file legacy impose use of kde2 and , consequently, qt2 On other and in /usr/lib there is libqt.so which is a symlink to /usr/lib/libqt.so.1 Then I supposed the ld link order was wrong and swapping /usr/lib and /usr/lib/qt2 positions in macro all_libraries in kdbg/Makefile solved the problem. Now I have a full functional kdbg-1.1.7beta1 KDE aware debugger. But the problem remains: 1) installing kde1-compat-1.1.2 ld finds qt 1.1.2 shared object for first. 2) Not installing can't compile old good kde1.1.2 apps 3) Don't know how to impose different ordering for libraries with autoconf automake stuff. Anyway LM7.2 is great, thank you. D.Parodi
Re: [Cooker] Another xmms small proposition .
Yo, On Tue, Nov 14, 2000 at 04:53:12PM +0200, Meir Faraj wrote: On Tuesday 14 November 2000 16:10, you wrote: Meir Faraj [EMAIL PROTECTED] writes: Hi all , I've saw there is an Xmms - avi (0.6a version) that plays other formats like asf , divx.;-),... it will be a good things to see xmms playing more formats it use the libavifile library so u could made it afvaible for it with the utilitities we've spoke a month ago (About playing windows media?(And others)) . Last time I checked, it needed closed-source DLL's. but you could like I've said use windows dll's (like u already make for ttf font;-)) and this one is justly to enable support for external proprietary codecs like asf. I think you will never have open sourced dlls or codecs for these one , u know why;-) but , it will be pleasant to use them.. No. We talked about this before. DrakFont searches for Windows fonts, on your windows partition, that's external. To include something inside a main package would be a different thing. There are vraious problems, see: (1) We do open source. This is the case with say, why don't we have applixware in the main distro, why don't we have nvidia drivers, why don't we have lucent modem drivers ... (2) The license probably would't allow us to do that. We sell the LM product for money too, I'm not sure if the license says that we can do that. In any case the license for those DLLs suck. (IMHO). Of course providing, say, libavifile is one thing, but the DLLs is another. -- Geoffrey Lee [EMAIL PROTECTED] §õªø· ~/.signature ¤¤¤åbig5 compliant. http://www.mandrakesoft.com/~snailtalk ftp://devel.mandrakesoft.com/pub/people/snailtalk "Seven days in a honeymoon makes one whole week."
Re: [Cooker] Need help: HP Pavilion 5195 Laptop
And behold, Christopher Molnar spake these words on Tue, Nov 14, 2000 at 06:37:38AM -0500: Has anyone in "cooker-land" gotten the HP Pavilion 5195 or 5100 series laptops to work in X? If so please share your secret? Can anyone tell me what I can do to even get a generic X 800x600 session running on this machine? I would be happy with the FB server that runs and looks decent on install at this point. Responded privately. If someone else needs information on getting XF86-FBDev working like their graphical install mode because the regular servers don't seem to cut it, the instructions I sent Christopher can be helpful - just let me know. -- _ _ Randy Dees |_| C o l l e c t i v e |_|[EMAIL PROTECTED] Pager: 800-946-4646 |_ technologies _| www.colltech.com Pin: 1433794[] [] "The Power of Many Minds"
Re: [Cooker] Need help: HP Pavilion 5195 Laptop
Thank you for the email and help. Someone from the Mandrake development team also gave me the same information and it worked perfictly. However, I made some changes and was able to get the FBDev working in 1024x768 resolution with a 32bpp depth. I will post directions later as soon as I get some other work done here. Again thanks for your help! -Chris On Tuesday 14 November 2000 10:10, Randy Dees wrote: And behold, Christopher Molnar spake these words on Tue, Nov 14, 2000 at 06:37:38AM -0500: Has anyone in "cooker-land" gotten the HP Pavilion 5195 or 5100 series laptops to work in X? If so please share your secret? Can anyone tell me what I can do to even get a generic X 800x600 session running on this machine? I would be happy with the FB server that runs and looks decent on install at this point. Responded privately. If someone else needs information on getting XF86-FBDev working like their graphical install mode because the regular servers don't seem to cut it, the instructions I sent Christopher can be helpful - just let me know.
[Cooker] locale-probs after update with last glibc
Hi folks,
after update of a 7.2 MDK with the last cooker-stuff (glibc, ...) I
always got
if the update-menu or other perl-stuff is called following error:
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = "en",
LC_ALL = (unset),
LC_MESSAGES = "en_US",
LC_TIME = "en_US",
LC_NUMERIC = "en_US",
LC_CTYPE = "en_US",
LC_MONETARY = "en_US",
LC_COLLATE = "en_US",
LANG = "en"
are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
I know this was discussed in the past but I never saw a solution.
Somebody told that the local-stuff has to be rebuild but this never
happened.
In the last days nobody talked about this prob - silence - so maybe
there is a
circumvention or any other solution.
Maybe I missed something, if so, please tell me again what I have to do.
Thanks in advance for any help
Udo
Re: [Cooker] kde 2.0 resetting with vmware 2.0
On Sábado 11 Noviembre 2000 06:57, Chmouel Boudjnah wrote: Randy Welch [EMAIL PROTECTED] writes: Umm this could be you actually running out of swap space and and the kernel is off killing things as fast as it can. I had this problem for we don't have an OOM killer in our 2.2.x kernel. and I have 520MB of swap for 256MB of ram. -- NEXT MEDIA INTERACTIVE Juan Luis Baptiste Ingeniero de Desarrollo [EMAIL PROTECTED] Dir: Calle 98 9 - 03 P.2 Tel: 57 1 218 Ext. 339 BOGOTA - COLOMBIA
Re: [Cooker] Need help: HP Pavilion 5195 Laptop
On Tuesday 14 November 2000 16:10, you wrote: And behold, Christopher Molnar spake these words on Tue, Nov 14, 2000 at 06:37:38AM -0500: Has anyone in "cooker-land" gotten the HP Pavilion 5195 or 5100 series laptops to work in X? If so please share your secret? Can anyone tell me what I can do to even get a generic X 800x600 session running on this machine? I would be happy with the FB server that runs and looks decent on install at this point. Responded privately. If someone else needs information on getting XF86-FBDev working like their graphical install mode because the regular servers don't seem to cut it, the instructions I sent Christopher can be helpful - just let me know. It would be nice. Regards,
Re: [Cooker] Another xmms small proposition .
(2) The license probably would't allow us to do that. We sell the LM product for money too, I'm not sure if the license says that we can do that. In any case the license for those DLLs suck. (IMHO). I've doesn't tell to include DLL's only the avifiles and the xmms-avi pluginn's and a small perl script to include dll's to the avi . libavifiles is open source without problems , xmms-avi also so not a problems. and a small perlscript is not a problems so it answere you 4 all . Of course providing, say, libavifile is one thing, but the DLLs is another. this is I see the answer ? you are not against to put in main libafile and xmms-avi ?
Re: [Cooker] Another xmms small proposition .
Meir Faraj [EMAIL PROTECTED] writes: [...] Last time I checked, it needed closed-source DLL's. but you could like I've said use windows dll's (like u already make for ttf font;-)) and this one is justly to enable support for external proprietary codecs like asf. I think you will never have open sourced dlls or codecs for these one , u know why;-) Okay, wihtout me then. Not interested in proprietary codecs. -- Guillaume Cottenceau -- Distribution Developer for MandrakeSoft http://us.mandrakesoft.com/~gc/
[Cooker] Help with GeForce2 GTS and XFree 4.0.1 under LM 7.2?
[Spencer Crume] I have installed LM 7.2 without a problem but it does not appear to have 3D support for my graphics card (NVIDIA GeForce2 GTS 64meg DDR). So I installed Xfree86 4.01 and then the drivers from the NVIDIA ftp site and all I get is a blank screen when the Xserver starts. Any suggestions? My Computer is as follows: Dell Dimension XPSb800r PIII 800mhz 128 meg 800mhz RDRAM GeForce2 GTS 64meg DDR Soundblaster Live! IBM 45gig HDD (windows ME) WD 6.4 gig HDD (LM 7.2) Thanks in advance Spencer Crume [EMAIL PROTECTED]
Re: [Cooker] Another xmms small proposition .
On Tuesday 14 November 2000 18:35, you wrote: Meir Faraj [EMAIL PROTECTED] writes: [...] Last time I checked, it needed closed-source DLL's. but you could like I've said use windows dll's (like u already make for ttf font;-)) and this one is justly to enable support for external proprietary codecs like asf. I think you will never have open sourced dlls or codecs for these one , u know why;-) Okay, wihtout me then. Not interested in proprietary codecs. ;-(( ok understand your point will never ask about again
Re: [Cooker] Help with GeForce2 GTS and XFree 4.0.1 under LM 7.2?
On Tuesday 14 November 2000 17:02, you wrote: [Spencer Crume] I have installed LM 7.2 without a problem but it does not appear to have 3D support for my graphics card (NVIDIA GeForce2 GTS 64meg DDR). So I installed Xfree86 4.01 and then the drivers from the NVIDIA ftp site and all I get is a blank screen when the Xserver starts. Any suggestions? I have a viper 550 TNT card, I have had this problem after installing the drivers. It has disappeared after a reboot. I am unable to use kdm though this locks the system or generates a segmentation fault, I am not sure if this is related to the nvidia drivers or kde2. -- Regards Mark
[Cooker] Konqueror
Can anybody give an estimate when an updated Konqueror (with java working) might be available for 7.2? Thanks, --Doug -- == Douglas Roberts, TSA-SA| Los Alamos National Laboratory | All good work is done in defiance [EMAIL PROTECTED] | of management. -- Bob Woodward (505)667-4569 | ==
Re: [Cooker] Another xmms small proposition .
[EMAIL PROTECTED] (Meir Faraj) writes: (2) The license probably would't allow us to do that. We sell the LM product for money too, I'm not sure if the license says that we can do that. In any case the license for those DLLs suck. (IMHO). I've doesn't tell to include DLL's only the avifiles and the xmms-avi pluginn's and a small perl script to include dll's to the avi . libavifiles is open source without problems , xmms-avi also so not a problems. and a small perlscript is not a problems so it answere you 4 all . I'm sad to see that opensource is not the priority or some people, even on cooker. Of course providing, say, libavifile is one thing, but the DLLs is another. this is I see the answer ? you are not against to put in main libafile and xmms-avi ? -- dam's
Re: [Cooker] locale-probs after update with last glibc
I thought I was the only one getting these errors. Since I've seen no one
else mention this problem I thought there might have been a problem with
one of the packages I've installed.
Also, has anyone else been getting the occassional restorekdemimetypes
errors regarding scipts being too long? I've had this error now for about 4
weeks. It seems to be a perl error and it pops up whenever rpm runs
update-menus.
And finally ...
Is konqueror currently working at all?
When in KDE I cannot open anything which calls konqueror. I was getting a
protocol related error but now nothing. Anybody else getting this?
I've gone over to Gnome where things are working fine and I've been
looking forward to seeing some updates for KDE.
Although things are looking pretty good we seem to have hit a low ... Or is
it just my system?
Udo Weber
[EMAIL PROTECTED]To: [EMAIL PROTECTED]
com cc:
Sent by: Subject: [Cooker] locale-probs
after update with last glibc
[EMAIL PROTECTED]
nz.ibm.com
11/14/2000 07:45 AM
Please respond to
cooker
Hi folks,
after update of a 7.2 MDK with the last cooker-stuff (glibc, ...) I
always got
if the update-menu or other perl-stuff is called following error:
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = "en",
LC_ALL = (unset),
LC_MESSAGES = "en_US",
LC_TIME = "en_US",
LC_NUMERIC = "en_US",
LC_CTYPE = "en_US",
LC_MONETARY = "en_US",
LC_COLLATE = "en_US",
LANG = "en"
are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
I know this was discussed in the past but I never saw a solution.
Somebody told that the local-stuff has to be rebuild but this never
happened.
In the last days nobody talked about this prob - silence - so maybe
there is a
circumvention or any other solution.
Maybe I missed something, if so, please tell me again what I have to do.
Thanks in advance for any help
Udo
Re: [Cooker] Another xmms small proposition .
On Tuesday 14 November 2000 21:09, you wrote: I'm sad to see that opensource is not the priority or some people, even on cooker. no , is a priority but sometime you could not get something without some lost , see you've got netscape , why ? you couldn't do anything without it ? konqueror use netscape plugin's , and is not perfect (yet). to be honest , If you think opensource so powerfull to change mind of big society like microsoft to enable people to made avaible (legaly) linux codec I will be glad . but I think it won't happen (not yet) . the problem is that the only ways to use these codecs is to get them and play them with the only open source project (that is present in contrib) libavifiles . I know why you won't do this : netscape is too integrated in linux to put it out (yet) . but if people will have possibility to play with avifiles format not avaible in linux this will froze development of GPL one. (not good) is 4 this reason that in my precedant mail I've changed my mind and tell that I understand u know and I won't use them anymore. thanks and excuse me , I've not see this in this angle ;-)
Re: [Cooker] Konqueror
Doug, I have just shifted some priorities and am trying to get a current KDE build working right now on 7.2. I am hoping that if all goes well I may be able to get something out to everyone this week. If I put together some RPM's are you willing to test for me? -Chris On Tuesday 14 November 2000 13:00, you wrote: Can anybody give an estimate when an updated Konqueror (with java working) might be available for 7.2? Thanks, --Doug
[Cooker] HP 5195 laptop configs
Well a large number of folks sent me email requesting the following information. So, if anyone wants to setup an HP Pavilion 5195 laptop, here is the link to how I got it to work: (1024x768 and 32bpp). http://www.mandrakesoft.com/~molnarc/hp_N5195.html Now, most of this information came from a very excellent page at: http://bowie.mit.edu/~simon/HP_N3330.htm Please give that author credit for this. -Chris
[Cooker] Small question 4 KDE Cooker .
Hi , thanks , a lot 4 your ongoing works . I want to install the cooker and want to know if it's possible to copy all curent user configuration or configuration have changed on the new KDE ? Kmail? if no what I need to do.
Re: [Cooker] Konqueror
You bet, Chris. Thanks, --Doug On Wednesday 15 November 2000 11:58, Christopher Molnar wrote: Doug, I have just shifted some priorities and am trying to get a current KDE build working right now on 7.2. I am hoping that if all goes well I may be able to get something out to everyone this week. If I put together some RPM's are you willing to test for me? -Chris On Tuesday 14 November 2000 13:00, you wrote: Can anybody give an estimate when an updated Konqueror (with java working) might be available for 7.2? Thanks, --Doug -- == Douglas Roberts, TSA-SA| Los Alamos National Laboratory | All good work is done in defiance [EMAIL PROTECTED] | of management. -- Bob Woodward (505)667-4569 | ==
Re: [Cooker] Another xmms small proposition .
Am Dienstag, 14. November 2000 20:09 schrieben Sie: [EMAIL PROTECTED] (Meir Faraj) writes: (2) The license probably would't allow us to do that. We sell the LM product for money too, I'm not sure if the license says that we can do that. In any case the license for those DLLs suck. (IMHO). I've doesn't tell to include DLL's only the avifiles and the xmms-avi pluginn's and a small perl script to include dll's to the avi . libavifiles is open source without problems , xmms-avi also so not a problems. and a small perlscript is not a problems so it answere you 4 all . I'm sad to see that opensource is not the priority or some people, even on cooker. A nod is as good as a wink to a blind horse! Regards Burkhard Zombronner -- Microsoft is not dead, it just smells funny
Re: [Cooker] HP 5195 laptop configs
On 14 Nov 2000, Chmouel Boudjnah wrote: Christopher Molnar [EMAIL PROTECTED] writes: Now, most of this information came from a very excellent page at: what kind of soundcard ? lspcidrake output. == Intel Corporation|440BX/ZX - 82443BX/ZX Host bridge (unknown ignore) Intel Corporation|440BX/ZX - 82443BX/ZX AGP bridge (unknown ignore) Texas Instruments|PCI1420 (unknown unknown) Texas Instruments|PCI1420 (unknown unknown) Intel Corporation|82371AB PIIX4 ISA (unknown unknown) Intel Corporation|82371AB PIIX4 IDE (STORAGE_IDE unknown) Intel Corporation|82371AB PIIX4 USB (SERIAL_USB usb-uhci) Intel Corporation|82371AB PIIX4 ACPI (unknown unknown) ESS Technology|ES1988 Allegro-1 (MULTIMEDIA_AUDIO unknown) SubVendor=0x103c SubDevice=0x0012 ESS Technology|ESS Modem (COMMUNICATION_OTHER unknown) SubVendor=0x103c SubDevice=0x0012 Vendor=0x1113 Device=0x1216 (NETWORK_ETHERNET unknown) SubVendor=0x1113 SubDevice=0x2242 S3 Inc.|86C270-294 Savage/MX-/IX (DISPLAY_VGA Card:S3 Savage (generic)) SubVendor=0x103c SubDevice=0x0014 3Com/Megahertz 3CXEM556 Ethernet/Modem (network 3c589_cs) 3Com/Megahertz 3CXEM556 Ethernet/Modem (serial serial_cs) == and from /proc/pci: == PCI devices found: Bus 0, device 0, function 0: Host bridge: Intel 440BX - 82443BX Host (rev 3). Medium devsel. Master Capable. Latency=64. Prefetchable 32 bit memory at 0xec00 [0xec08]. Bus 0, device 1, function 0: PCI bridge: Intel 440BX - 82443BX AGP (rev 3). Medium devsel. Master Capable. Latency=128. Min Gnt=140. Bus 0, device 4, function 0: CardBus bridge: Texas Instruments Unknown device (rev 0). Vendor id=104c. Device id=ac51. Medium devsel. IRQ 11. Master Capable. Latency=168. Min Gnt=192.Max Lat=7. Bus 0, device 4, function 1: CardBus bridge: Texas Instruments Unknown device (rev 0). Vendor id=104c. Device id=ac51. Medium devsel. IRQ 11. Master Capable. Latency=168. Min Gnt=192.Max Lat=7. Bus 0, device 7, function 0: ISA bridge: Intel 82371AB PIIX4 ISA (rev 2). Medium devsel. Fast back-to-back capable. Master Capable. No bursts. Bus 0, device 7, function 1: IDE interface: Intel 82371AB PIIX4 IDE (rev 1). Medium devsel. Fast back-to-back capable. Master Capable. Latency=64. I/O at 0x1050 [0x1051]. Bus 0, device 7, function 2: USB Controller: Intel 82371AB PIIX4 USB (rev 1). Medium devsel. Fast back-to-back capable. IRQ 5. Master Capable. No bursts. I/O at 0x1060 [0x1061]. Bus 0, device 7, function 3: Bridge: Intel 82371AB PIIX4 ACPI (rev 3). Medium devsel. Fast back-to-back capable. Bus 0, device 8, function 0: Multimedia audio controller: ESS Technologies Unknown device (rev 18). Vendor id=125d. Device id=1988. Medium devsel. Fast back-to-back capable. IRQ 5. Master Capable. Latency=64. Min Gnt=2.Max Lat=24. I/O at 0x1400 [0x1401]. Bus 0, device 8, function 1: Communication controller: ESS Technologies Unknown device (rev 18). Vendor id=125d. Device id=1989. Medium devsel. Fast back-to-back capable. IRQ 5. I/O at 0x1800 [0x1801]. Bus 0, device 16, function 0: Ethernet controller: SMC Unknown device (rev 17). Vendor id=1113. Device id=1216. Medium devsel. Fast back-to-back capable. IRQ 11. Master Capable. Latency=64. Min Gnt=255.Max Lat=255. I/O at 0x1c00 [0x1c01]. Non-prefetchable 32 bit memory at 0xe800 [0xe800]. Bus 1, device 1, function 0: VGA compatible controller: S3 Inc. Unknown device (rev 17). Vendor id=5333. Device id=8c12. Medium devsel. IRQ 11. Master Capable. Latency=64. Min Gnt=4.Max Lat=255. Non-prefetchable 32 bit memory at 0xf000 [0xf000].
Re: [Cooker] Failed Cooker install
On Tuesday 14 November 2000 04:49, Ben Reser wrote: On Tue, Nov 14, 2000 at 12:46:46AM +, Peter Ruskin wrote: Chmouel, how am I supposed to send you a bug report? I went to Console 2 and entered "bug", which generated a 583k file "report.bug", but sympa@tampax keeps rejecting it "we accept only messages shorter than 100kb". I think the obvious answer is to email directly to Chmouel and not to the list, which is what I'm guessing you are doing if you're getting bounces from sympa. Thanks, Ben -- -- Peter Ruskin[EMAIL PROTECTED] Wrexham, UKKDE - the professionals' choice -- Uptime 0 hours 20 minutes --
Re: [Cooker] small question about XMMS .
On Tuesday 14 November 2000 12:37, Meir Faraj wrote:
On Tuesday 14 November 2000 14:08, you wrote:
Meir Faraj [EMAIL PROTECTED] writes:
Hi all ,
I wanna tell u about Arts sound problems .
By default XMMS doesn't use Arts to output sound
...
I have an Arts toggle on my desktop - if any program can't produce
sound when Arts is running, I just toggle Arts off while I run that
program and toggle it back on afterwards...
#!/bin/sh
if [ "$(ps -aux | gawk '{print $11}' | grep artsd)" != "artsd" ];
then
artsd
else
killall artsd
fi
--
--
Peter Ruskin[EMAIL PROTECTED]
Wrexham, UKKDE - the professionals' choice
--
Uptime 0 hours 26 minutes
--
Re: [Cooker] small question about XMMS .
On Tuesday 14 November 2000 22:00, you wrote:
On Tuesday 14 November 2000 12:37, Meir Faraj wrote:
On Tuesday 14 November 2000 14:08, you wrote:
Meir Faraj [EMAIL PROTECTED] writes:
Hi all ,
I wanna tell u about Arts sound problems .
By default XMMS doesn't use Arts to output sound
...
I have an Arts toggle on my desktop - if any program can't produce
sound when Arts is running, I just toggle Arts off while I run that
program and toggle it back on afterwards...
#!/bin/sh
if [ "$(ps -aux | gawk '{print $11}' | grep artsd)" != "artsd" ];
then
artsd
else
killall artsd
fi
but why Arts could not simply catch all sound event from esd and oss drivers
?
Or why don't all of them compatible with Arts ?
Re: [Cooker] Another xmms small proposition .
[EMAIL PROTECTED] (Burkhard Zombronner) writes: Am Dienstag, 14. November 2000 20:09 schrieben Sie: [EMAIL PROTECTED] (Meir Faraj) writes: (2) The license probably would't allow us to do that. We sell the LM product for money too, I'm not sure if the license says that we can do that. In any case the license for those DLLs suck. (IMHO). I've doesn't tell to include DLL's only the avifiles and the xmms-avi pluginn's and a small perl script to include dll's to the avi . libavifiles is open source without problems , xmms-avi also so not a problems. and a small perlscript is not a problems so it answere you 4 all . I'm sad to see that opensource is not the priority or some people, even on cooker. A nod is as good as a wink to a blind horse! gni? don't understand, sorry. -- dam's
[Cooker] Don't you want any bug reports then? Am I wasting my time?
On Tue, 14 Nov 2000 00:46:46 + I wrote: Chmouel, how am I supposed to send you a bug report? I went to Console 2 and entered "bug", which generated a 583k file "report.bug", but sympa@tampax keeps rejecting it "we accept only messages shorter than 100kb". I did an expert developer install from hd.img and it failed in post-install configuration phase. (Locales). Although there were no error messages (on Console 7) during RPM installation, a subsequent (failed) update revealed that many packages had not been installed. Bug report was attached on 2 previous failed postings. On Mon, 13 Nov 2000 20:49:59 -0800 Ben Reser wrote: I think the obvious answer is to email directly to Chmouel and not to the list, which is what I'm guessing you are doing if you're getting bounces from sympa. On 13 Nov 2000 21:00:33 -0800 Chmouel spake: no, Chmouel get more than 200 personal email by day (mean people non mdksoft people or people i know) and Chmouel will never answer if his get a big 100k mail. -- -- Peter Ruskin[EMAIL PROTECTED] Wrexham, UKKDE - the professionals' choice -- Uptime 1 hour 6 minutes --
Re: [Cooker] Don't you want any bug reports then? Am I wasting my time?
On Tuesday 14 November 2000 22:48, you wrote: On Tue, 14 Nov 2000 00:46:46 + I wrote: Chmouel, how am I supposed to send you a bug report? I went to Console 2 and entered "bug", which generated a 583k file "report.bug", but sympa@tampax keeps rejecting it "we accept only messages shorter than 100kb". I did an expert developer install from hd.img and it failed in post-install configuration phase. (Locales). Although there were no error messages (on Console 7) during RPM installation, a subsequent (failed) update revealed that many packages had not been installed. Bug report was attached on 2 previous failed postings. On Mon, 13 Nov 2000 20:49:59 -0800 Ben Reser wrote: I think the obvious answer is to email directly to Chmouel and not to the list, which is what I'm guessing you are doing if you're getting bounces from sympa. On 13 Nov 2000 21:00:33 -0800 Chmouel spake: no, Chmouel get more than 200 personal email by day (mean people non mdksoft people or people i know) and Chmouel will never answer if his get a big 100k mail. You certainly have only tous describe the situation . is too big 583k k-)
Re: [Cooker] Another xmms small proposition .
Am Dienstag, 14. November 2000 22:43 schrieben Sie: [EMAIL PROTECTED] (Burkhard Zombronner) writes: Am Dienstag, 14. November 2000 20:09 schrieben Sie: [EMAIL PROTECTED] (Meir Faraj) writes: (2) The license probably would't allow us to do that. We sell the LM product for money too, I'm not sure if the license says that we can do that. In any case the license for those DLLs suck. (IMHO). I've doesn't tell to include DLL's only the avifiles and the xmms-avi pluginn's and a small perl script to include dll's to the avi . libavifiles is open source without problems , xmms-avi also so not a problems. and a small perlscript is not a problems so it answere you 4 all . I'm sad to see that opensource is not the priority or some people, even on cooker. A nod is as good as a wink to a blind horse! gni? don't understand, sorry. Hi dam's, should simply mean: if somebody does not understand the philosopy, the power and the benefit of open source ( that means he's kind of blind) you can't push him to understand. regards burkhard but it's near to offtopic, I guess -- Microsoft is not dead, it just smells funny
[Cooker] How can I get rid of cups ? (my way)
Hello. Since I couldn't get good print quality with Cups and HP LaserJet 6L, I had to get rid of Cups too, today. I've removed cups-1.1.4-3mdk.i586.rpm cups-drivers-0.3.6-30mdk.i586.rpm and then installed control-panel-3.11-17mdk.i586.rpm lpr-0.50-7mdk.i586.rpm rhs-printfilters-1.76-3mdk.i586.rpm printtool-3.44-3mdk.noarch.rpm The 'printtool' rpm is stolen from Mandrake 7.1 Now my printing is ok and in good quality as before on Mandrake 6.1. Liebe Grüße, Nora. -- [EMAIL PROTECTED]http://www.sappho-net.de/ Lesbian Computer Networks, Finland http://www.sappho.net/ Web for Women (von Frauen, für Frauen) http://www.w4w.net/
Re: [Cooker] HP 5195 laptop configs
On Wednesday 15 November 2000 21:59, Christopher Molnar wrote: | Well a large number of folks sent me email requesting the following |information. So, if anyone wants to setup an HP Pavilion 5195 laptop, | here is the link to how I got it to work: (1024x768 and 32bpp). | |http://www.mandrakesoft.com/~molnarc/hp_N5195.html |Now, most of this information came from a very excellent page at: |http://bowie.mit.edu/~simon/HP_N3330.htm |Please give that author credit for this. | |-Chris Super, both pages are excellent! Simon, have you tried XF 4.0.1 and xf86cfg utility? I encountered several problems re-installing XF 3.3.6 and decided to try Xf 4.0.1 (some time ago). xf86cfg, which is included with it, solved all problems, my X started at 1024x768. It also created very interesting ModeLine, see below. Is it possible to put it in Monitor/Card database so next time [Compaq Presario 1800] users will be able to get this ModeLine immediately? On top of 1024x768, I have also 640x480 mode operational, but was not able to start X at 800x600. LCD panel is 15" 1024x768, 800x600 works in Windows. Section "Monitor" Identifier "Monitor0" VendorName "Monitor Vendor" ModelName"Monitor Model" ModeLine "1024x768@62" 65.1 1024 1040 1136 1312 768 768 771 792 +hsync +vsync EndSection Section "Device" Identifier "Card0" Driver "ati" VendorName "ATI" BoardName "Mach64 LM" ChipSet "ati" ChipId 0x4c4d ChipRev 0x64 BusID "PCI:1:0:0" EndSection -- Vadim Plessky http://kde2.newmail.ru (English) http://kde2.newmail.ru/index_rus.html (Russian) Do you have Arial font installed? Just test it! http://kde2.newmail.ru/font_test_arial.html
[Cooker] Promise Ultra100 card supported by linux
Who said that the Promise Ultra100 card wasn't supported by Linux-Mandrake? It works a treat on my machine, with kernel 2.2.17-0.24mdk and 2.2.17-21mdk. With 2.2.17-0.24mdk, I have to append "ide2=0xd400,0xd802 ide3=0xdc00,0xe002" to lilo, but 2.2.17-21mdk doesn't need it. "Autotune" in lilo will make it hang on partition check during boot. I don't use any drive optimisations. Extract from dmesg ... PDC20267: IDE controller on PCI bus 00 dev 40 PDC20267: chipset revision 2 PDC20267: not 100% native mode: will probe irqs later PDC20267: ROM enabled at 0xea00 PDC20267: (U)DMA Burst Bit ENABLED Primary PCI Mode Secondary PCI Mode. PDC20267: FORCING PRIMARY MODE BIT 0x00 - 0x01 MASTER PDC20267: FORCING SECONDARY MODE BIT 0x00 - 0x01 MASTER ide2: BM-DMA at 0xe400-0xe407, BIOS settings: hde:DMA, hdf:DMA ide3: BM-DMA at 0xe408-0xe40f, BIOS settings: hdg:DMA, hdh:DMA hde: Maxtor 54098H8, ATA DISK drive hdf: Maxtor 54098U8, ATA DISK drive hdg: Maxtor 91020D6, ATA DISK drive hdh: Maxtor 88400D8, ATA DISK drive ide2 at 0xd400-0xd407,0xd802 on irq 15 ide3 at 0xdc00-0xdc07,0xe002 on irq 15 # Actually, 54098H8 is a UDMA100 drive - for some reason kernel thinks # it's a 33 - but it goes pretty fast - not as fast as the 66 though. hde: Maxtor 54098H8, 39082MB w/2048kB Cache, CHS=79406/16/63, UDMA(33) hdf: Maxtor 54098U8, 39082MB w/2048kB Cache, CHS=79406/16/63, UDMA(66) hdg: Maxtor 91020D6, 9728MB w/256kB Cache, CHS=19765/16/63, UDMA(33) hdh: Maxtor 88400D8, 8011MB w/256kB Cache, CHS=16278/16/63, UDMA(33) Test results (/dev/sda is an IBM UttraSCSI) ... # hdparm -t /dev/hde /dev/hde: Timing buffered disk reads: 64 MB in 3.47 seconds = 18.44 MB/sec # hdparm -t /dev/hdf /dev/hdf: Timing buffered disk reads: 64 MB in 2.34 seconds = 27.35 MB/sec # hdparm -t /dev/hdg /dev/hdg: Timing buffered disk reads: 64 MB in 5.22 seconds = 12.26 MB/sec # hdparm -t /dev/hdh /dev/hdh: Timing buffered disk reads: 64 MB in 5.74 seconds = 11.15 MB/sec # hdparm -t /dev/sda /dev/sda: Timing buffered disk reads: 64 MB in 7.76 seconds = 8.25 MB/sec -- -- Peter Ruskin[EMAIL PROTECTED] Wrexham, UKKDE - the professionals' choice -- Uptime 2 hours 12 minutes --
Re: [Cooker] Another xmms small proposition .
On Tuesday 14 November 2000 23:25, you wrote: Am Dienstag, 14. November 2000 22:43 schrieben Sie: [EMAIL PROTECTED] (Burkhard Zombronner) writes: Am Dienstag, 14. November 2000 20:09 schrieben Sie: [EMAIL PROTECTED] (Meir Faraj) writes: (2) The license probably would't allow us to do that. We sell the LM product for money too, I'm not sure if the license says that we can do that. In any case the license for those DLLs suck. (IMHO). I've doesn't tell to include DLL's only the avifiles and the xmms-avi pluginn's and a small perl script to include dll's to the avi . libavifiles is open source without problems , xmms-avi also so not a problems. and a small perlscript is not a problems so it answere you 4 all . I'm sad to see that opensource is not the priority or some people, even on cooker. A nod is as good as a wink to a blind horse! gni? don't understand, sorry. Hi dam's, should simply mean: if somebody does not understand the philosopy, the power and the benefit of open source ( that means he's kind of blind) you can't push him to understand. I understand the powerfull and philosophy of linux since 1995 so I've used a lot of distrib . you're in mistake ;-) I've successfully moved to linux in the last month 29 persons it's not bad . It's simply that I need to make them use it without windows . and they dependson some things (like wma , DVD ) that are ugly in linux for proprietary raison . I want to pass them to linux since the majority learn computers sciences and could them be future programers . at the start is hard to made them change there mind ;-( I doesn't have @ all windows so doesn't matter about the option I said . I spoke only for others friends k-)
Re: [Cooker] Promise Ultra100 card supported by linux
My PDC20265 didn't work. ide2 and ide3 are at different I/O then PDC20267. With the latest ide patch it works, and with 2.4. seb On Tue, 14 Nov 2000, Peter Ruskin wrote: Who said that the Promise Ultra100 card wasn't supported by Linux-Mandrake? It works a treat on my machine, with kernel 2.2.17-0.24mdk and 2.2.17-21mdk. With 2.2.17-0.24mdk, I have to append "ide2=0xd400,0xd802 ide3=0xdc00,0xe002" to lilo, but 2.2.17-21mdk doesn't need it. "Autotune" in lilo will make it hang on partition check during boot. I don't use any drive optimisations. Extract from dmesg ... PDC20267: IDE controller on PCI bus 00 dev 40 PDC20267: chipset revision 2 PDC20267: not 100% native mode: will probe irqs later PDC20267: ROM enabled at 0xea00 PDC20267: (U)DMA Burst Bit ENABLED Primary PCI Mode Secondary PCI Mode. PDC20267: FORCING PRIMARY MODE BIT 0x00 - 0x01 MASTER PDC20267: FORCING SECONDARY MODE BIT 0x00 - 0x01 MASTER ide2: BM-DMA at 0xe400-0xe407, BIOS settings: hde:DMA, hdf:DMA ide3: BM-DMA at 0xe408-0xe40f, BIOS settings: hdg:DMA, hdh:DMA hde: Maxtor 54098H8, ATA DISK drive hdf: Maxtor 54098U8, ATA DISK drive hdg: Maxtor 91020D6, ATA DISK drive hdh: Maxtor 88400D8, ATA DISK drive ide2 at 0xd400-0xd407,0xd802 on irq 15 ide3 at 0xdc00-0xdc07,0xe002 on irq 15 # Actually, 54098H8 is a UDMA100 drive - for some reason kernel thinks # it's a 33 - but it goes pretty fast - not as fast as the 66 though. hde: Maxtor 54098H8, 39082MB w/2048kB Cache, CHS=79406/16/63, UDMA(33) hdf: Maxtor 54098U8, 39082MB w/2048kB Cache, CHS=79406/16/63, UDMA(66) hdg: Maxtor 91020D6, 9728MB w/256kB Cache, CHS=19765/16/63, UDMA(33) hdh: Maxtor 88400D8, 8011MB w/256kB Cache, CHS=16278/16/63, UDMA(33) Test results (/dev/sda is an IBM UttraSCSI) ... # hdparm -t /dev/hde /dev/hde: Timing buffered disk reads: 64 MB in 3.47 seconds = 18.44 MB/sec # hdparm -t /dev/hdf /dev/hdf: Timing buffered disk reads: 64 MB in 2.34 seconds = 27.35 MB/sec # hdparm -t /dev/hdg /dev/hdg: Timing buffered disk reads: 64 MB in 5.22 seconds = 12.26 MB/sec # hdparm -t /dev/hdh /dev/hdh: Timing buffered disk reads: 64 MB in 5.74 seconds = 11.15 MB/sec # hdparm -t /dev/sda /dev/sda: Timing buffered disk reads: 64 MB in 7.76 seconds = 8.25 MB/sec -- -- Peter Ruskin[EMAIL PROTECTED] Wrexham, UKKDE - the professionals' choice -- Uptime 2 hours 12 minutes --
Re: [Cooker] How can I get rid of cups ? (my way)
Once, you can find the printtool under the contribs, and second, I
cannot imagine why you get bad printing quality with your HP LaserJet
6L. All drivers which were available for LPD in 7.1 are also available
for CUPS under 7.2. And under CUPS you can even do a lot of fine-tuning
to raise the printing quality.
The drivers available for your printer are
HP LaserJet 6 series, CUPS+GIMP-Print
HP LaserJet 6, Foomatic + ljet4
HP LaserJet 6, Foomatic + stp-4.0 (GIMP-Print)
HP LaserJet 6L, Foomatic + ljet4
The "Foomatic + ljet4" entries are exactly the same driver as in
Mandrake 7.1. They should give exactly the same quality. Make sure that
you set the default options correctly to get a high quality. Either got
to http://localhost:631/printers/, click the "Configure Printer" button
at the entry of your HP LaserJet 6L or start "kups" and click with the
right button on your printer in the printer list of the main window. In
the pop-up menu choose "Configure Printer". Now you can put the
resolution to 600x600 dpi, try different dithering methods, and so on.
You can even set up options for every individual printout ("Options" in
"xpp", "Properties" in "qtcups".
Till
P. S.: I have a LaserJet 1100 here and it works perfectly with CUPS.
Nora Etukudo wrote:
Hello.
Since I couldn't get good print quality with Cups and HP LaserJet 6L, I
had to get rid of Cups too, today.
I've removed
cups-1.1.4-3mdk.i586.rpm
cups-drivers-0.3.6-30mdk.i586.rpm
and then installed
control-panel-3.11-17mdk.i586.rpm
lpr-0.50-7mdk.i586.rpm
rhs-printfilters-1.76-3mdk.i586.rpm
printtool-3.44-3mdk.noarch.rpm
The 'printtool' rpm is stolen from Mandrake 7.1
Now my printing is ok and in good quality as before on Mandrake 6.1.
Liebe Grüße, Nora.
Re: [Cooker] CUPS: Back in Cooker again!
"Godin, Paul" wrote: Great news. Should I go to the Mandrake site to download this version? Where would it be. This is only important for people who have downloaded the complete Cooker and installed it. This Cooker is not binary-compatible to Mandrake 7.2. So Cooker needs this new CUPS package and this package does not work on 7.2 unless you do an "rpm --rebuild" on the source RPM. One item I notice, if I cancel a job with CUPS WEB manager, the job will go away but the printer, like the energiser bunny, keeps on going and going... The printer has a certain amount of memory and it makes it empty.CUPS does not send a reset signal to the printer. Till
Re: [Cooker] Promise Ultra100 card supported by linux
On Tuesday 14 November 2000 03:43 pm, Peter Ruskin wrote: Who said that the Promise Ultra100 card wasn't supported by Linux-Mandrake? It works a treat on my machine, with kernel 2.2.17-0.24mdk and 2.2.17-21mdk. With 2.2.17-0.24mdk, I have to append "ide2=0xd400,0xd802 ide3=0xdc00,0xe002" to lilo, but 2.2.17-21mdk doesn't need it. "Autotune" in lilo will make it hang on partition check during boot. I don't use any drive optimisations. .. ~ You should /dev/hda: Timing buffer-cache reads: 128 MB in 0.81 seconds =158.02 MB/sec Timing buffered disk reads: 64 MB in 2.88 seconds = 22.22 MB/sec that's an IDE ata/33 drive plugged into a cheap BX board ;p /dev/hda: multcount= 16 (on) I/O support = 1 (32-bit) unmaskirq= 1 (on) using_dma= 1 (on) keepsettings = 1 (on) nowerr = 0 (off) readonly = 0 (off) readahead= 128 (on) -- Tom Brinkman [EMAIL PROTECTED] Galveston Bay Extract from dmesg ... PDC20267: IDE controller on PCI bus 00 dev 40 PDC20267: chipset revision 2 PDC20267: not 100% native mode: will probe irqs later PDC20267: ROM enabled at 0xea00 PDC20267: (U)DMA Burst Bit ENABLED Primary PCI Mode Secondary PCI Mode. PDC20267: FORCING PRIMARY MODE BIT 0x00 - 0x01 MASTER PDC20267: FORCING SECONDARY MODE BIT 0x00 - 0x01 MASTER ide2: BM-DMA at 0xe400-0xe407, BIOS settings: hde:DMA, hdf:DMA ide3: BM-DMA at 0xe408-0xe40f, BIOS settings: hdg:DMA, hdh:DMA hde: Maxtor 54098H8, ATA DISK drive hdf: Maxtor 54098U8, ATA DISK drive hdg: Maxtor 91020D6, ATA DISK drive hdh: Maxtor 88400D8, ATA DISK drive ide2 at 0xd400-0xd407,0xd802 on irq 15 ide3 at 0xdc00-0xdc07,0xe002 on irq 15 # Actually, 54098H8 is a UDMA100 drive - for some reason kernel thinks # it's a 33 - but it goes pretty fast - not as fast as the 66 though. hde: Maxtor 54098H8, 39082MB w/2048kB Cache, CHS=79406/16/63, UDMA(33) hdf: Maxtor 54098U8, 39082MB w/2048kB Cache, CHS=79406/16/63, UDMA(66) hdg: Maxtor 91020D6, 9728MB w/256kB Cache, CHS=19765/16/63, UDMA(33) hdh: Maxtor 88400D8, 8011MB w/256kB Cache, CHS=16278/16/63, UDMA(33) Test results (/dev/sda is an IBM UttraSCSI) ... # hdparm -t /dev/hde /dev/hde: Timing buffered disk reads: 64 MB in 3.47 seconds = 18.44 MB/sec # hdparm -t /dev/hdf /dev/hdf: Timing buffered disk reads: 64 MB in 2.34 seconds = 27.35 MB/sec # hdparm -t /dev/hdg /dev/hdg: Timing buffered disk reads: 64 MB in 5.22 seconds = 12.26 MB/sec # hdparm -t /dev/hdh /dev/hdh: Timing buffered disk reads: 64 MB in 5.74 seconds = 11.15 MB/sec # hdparm -t /dev/sda /dev/sda: Timing buffered disk reads: 64 MB in 7.76 seconds = 8.25 MB/sec
Re: [Cooker] HP 5195 laptop configs
Christopher Molnar [EMAIL PROTECTED] writes: ESS Technology|ES1988 Allegro-1 (MULTIMEDIA_AUDIO unknown) SubVendor=0x103c SubDevice=0x0012 there could be a driver for your card at : http://www.zabbo.net/maestro3/ it say it's experimental. -- MandrakeSoft Inc http://www.chmouel.org --Chmouel
[Cooker] Creating CDs
I am familiar with creating new/updated CDs of RedHat and getting them bootable/installable, from the how-to. Where do I find the FAQ for this mailing list, and the how-to on creating cooker install CDs. Thanks, Steve
Re: [Cooker] HP 5195 laptop configs
On Tuesday 14 November 2000 18:39, Chmouel Boudjnah wrote: Christopher Molnar [EMAIL PROTECTED] writes: ESS Technology|ES1988 Allegro-1 (MULTIMEDIA_AUDIO unknown) SubVendor=0x103c SubDevice=0x0012 there could be a driver for your card at : http://www.zabbo.net/maestro3/ it say it's experimental. Looks like it may work but I do not have a clue on how to get it to compile. I tried the way he said to do it and it did not work. Whole bunch of errors. Any ideas? -Chris
Re: [Cooker] HP 5195 laptop configs
Christopher Molnar [EMAIL PROTECTED] writes:
On Tuesday 14 November 2000 18:39, Chmouel Boudjnah wrote:
Christopher Molnar [EMAIL PROTECTED] writes:
ESS Technology|ES1988 Allegro-1 (MULTIMEDIA_AUDIO unknown)
SubVendor=0x103c SubDevice=0x0012
there could be a driver for your card at :
http://www.zabbo.net/maestro3/
it say it's experimental.
Looks like it may work but I do not have a clue on how to get it to compile.
I tried the way he said to do it and it did not work. Whole bunch of errors.
apply this patch :
--- maestro3.c.chmouTue Nov 14 16:50:59 2000
+++ maestro3.c Tue Nov 14 16:51:02 2000
@@ -104,11 +104,15 @@
#if defined(MODULE) defined(MODVERSIONS)
#include linux/modversions.h
#endif
+#if 0
#define DECLARE_WAITQUEUE(QUEUE,INIT) struct wait_queue QUEUE = {INIT, NULL}
#define wait_queue_head_t struct wait_queue *
+#endif
#define SILLY_PCI_BASE_ADDRESS(PCIDEV) (PCIDEV-base_address[0]
PCI_BASE_ADDRESS_IO_MASK)
#define SILLY_INIT_SEM(SEM) SEM=MUTEX;
+#if 0
#define init_waitqueue_head init_waitqueue
+#endif
#define SILLY_MAKE_INIT(FUNC) __initfunc(FUNC)
#define SILLY_OFFSET(VMA) ((VMA)-vm_offset)
#else
there are already defined in our kernel.
--
MandrakeSoft Inc http://www.chmouel.org
--Chmouel
Re: [Cooker] Menu woes solved by youll never guess....
Where did you get it? It is not listed on their web page. Salane Armisis Aieoln wrote: On Tuesday 14 November 2000 11:32, you wrote: Armisis Aieoln [EMAIL PROTECTED] writes: I was slowly trying to get my menus setup system wide for all my apps... just cause they released 7.2 support at helixcode, I got it it fixed my menu problem weird huh Sorry? Hey thats what software testing is all about GRIN thats why i am always running test software, cause I love the challange of trying to get it working, and I get overly excited when things do work GRIN... dave -- -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- Linux - Cause I dont do windows or ovens! [EMAIL PROTECTED] [EMAIL PROTECTED] [EMAIL PROTECTED] [EMAIL PROTECTED] [EMAIL PROTECTED] -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- Registered System: 83659
Re: [Cooker] WP2000 and Fonttastic
The fix is on: http://home.tampabay.rr.com/jandr/Mandrake.html On Tuesday 14 November 2000 14:08, you wrote: WordPerfect 2000 does not function with Mandrake 7.2 The FontTastic daemon is not available, attempted load it with supplied rpm but that failed due to conflict with the initscript shell in /etc. Worked fine under 7.1 before. Corel was contacted and waiting for a reply. Paul Godin Content-Type: text/html; charset="iso-8859-1"; name="Attachment: 1" Content-Transfer-Encoding: 7bit Content-Description: -- -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- Linux - Cause I dont do windows or ovens! [EMAIL PROTECTED] [EMAIL PROTECTED] [EMAIL PROTECTED] [EMAIL PROTECTED] [EMAIL PROTECTED] -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- Registered System: 83659
[Cooker] kernel-2.4.0
Hi, To be ready to the upcoming kernel-2.4.0 i'll begin the switch soon, there is a lot of issue who need to be resolved, i have beginned some package if you want to test them you can download from : https://kenobi.mandrakesoft.com/~chmou/kernel24/ it based on test11-pre4 (yes i know pre5 is out), let me know if you have problems. There is some architechtural changes, here i list them : --=-=-= alsa is merged into the kernel-??? (when ??? is -smp or normal or other kernel package) as well as alsa-source is merged in kernel-source kernel-headers doen't provide anymore a link to the source kernel but the real headers file, we should recompile the glibc with the last kernel-headers before releasing. --=-=-= [1] soon can be a lot sometime -- MandrakeSoft Inc http://www.chmouel.org --Chmouel
Re: [Cooker] WP2000 and Fonttastic
Armisis Aieoln [EMAIL PROTECTED] writes: The fix is on: http://home.tampabay.rr.com/jandr/Mandrake.html --=-=-= Not Found The requested URL /jandr/Mandrake.html was not found on this server. --=-=-= -- MandrakeSoft Inc http://www.chmouel.org --Chmouel
[Cooker] 7.2 Problem on Dell Laptop
I have installed 7.2 on My Dell Inspiron 7000 laptop and now have the following strange behaviour: Leave the machine alone and it hangs - hard! Need to powercycle. Occasionally X crashes (V4). The machine was previously running 7.1 + Cooker parts perfectly. Any clues? I've made sure apmd is running (I can close the lid, take the machine home and then open the lid and it all comes back to life..). I'm very suspicious that it's a bad interaction with V4 of XFree86 and the power management. Prior to installing 7.1 I was running V4 from Cooker without problems, however. I've also tried to install 3.3.6 from the distribution (via DrakConf) and this hangs the machine when it tries to test the configuration. For completenes, the XFree86 log file from /var/log is attached. When X crashes and re-starts it crashes with a Sig 11, if that is any help - and always when I've just typed a character or moved the rodent. Smells like an input device problem. This is a complete *virgin* install, too - I haven't (yet) futzed with it. /Kevin -- Kevin J. Maciunas [EMAIL PROTECTED] Department of Computer Science PH: +61-8-8303-5586 The University of Adelaide FAX:+61-8-8303-4366 Adelaide 5005 South Australia XFree86 Version 4.0.1 / X Window System (protocol Version 11, revision 0, vendor release 6400) Release Date: 1 July 2000 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (see http://www.XFree86.Org/FAQ) Operating System: Linux 2.2.17-21mdksmp i686 [ELF] Module Loader present (==) Log file: "/var/log/XFree86.0.log", Time: Wed Nov 15 11:39:15 2000 (==) Using config file: "/etc/X11/XF86Config-4" Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (??) unknown. (==) ServerLayout "layout1" (**) |--Screen "screen1" (0) (**) | |--Monitor "Generic|Generic LCD Panel 1024x768" (**) | |--Device "ATI Rage Mobility" (**) |--Input Device "Mouse1" (**) |--Input Device "Keyboard1" (**) Option "AutoRepeat" "250 30" (**) Option "XkbRules" "xfree86" (**) XKB: rules: "xfree86" (**) Option "XkbModel" "pc105" (**) XKB: model: "pc105" (**) Option "XkbLayout" "us" (**) XKB: layout: "us" (**) FontPath set to "unix/:-1" (**) RgbPath set to "/usr/X11R6/lib/X11/rgb" (==) ModulePath set to "/usr/X11R6/lib/modules" (**) Option "AllowMouseOpenFail" (--) using VT number 7 (II) Module ABI versions: XFree86 ANSI C Emulation: 0.1 XFree86 Video Driver: 0.2 XFree86 XInput driver : 0.1 XFree86 Server Extension : 0.1 XFree86 Font Renderer : 0.1 (II) Loader running on linux (II) LoadModule: "bitmap" (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor="The XFree86 Project" compiled for 4.0.1, module version = 1.0.0 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.1 (II) Loading font Bitmap (II) LoadModule: "pcidata" (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor="The XFree86 Project" compiled for 4.0.1, module version = 0.1.0 ABI class: XFree86 Video Driver, version 0.2 (II) PCI: Probing config type using method 1 (II) PCI: Config type is 1 (II) PCI: stages = 0x03, oldVal1 = 0x80002190, mode1Res1 = 0x8000 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 8086,7190 card , rev 03 class 06,00,00 hdr 00 (II) PCI: 00:01:0: chip 8086,7191 card , rev 03 class 06,04,00 hdr 01 (II) PCI: 00:04:0: chip 104c,ac17 card , rev 02 class 06,07,00 hdr 82 (II) PCI: 00:04:1: chip 104c,ac17 card , rev 02 class 06,07,00 hdr 82 (II) PCI: 00:07:0: chip 8086,7110 card , rev 02 class 06,80,00 hdr 80 (II) PCI: 00:07:1: chip 8086,7111 card , rev 01 class 01,01,80 hdr 00 (II) PCI: 00:07:2: chip 8086,7112 card , rev 01 class 0c,03,00 hdr 00 (II) PCI: 00:07:3: chip 8086,7113 card , rev 02 class 06,80,00 hdr 00 (II) PCI: 00:08:0: chip 125d,1968 card 1028,0085 rev 00 class 04,01,00 hdr 00 (II) PCI: 01:00:0: chip 1002,4c4d card 1028,0085 rev 64 class 03,00,00 hdr 00 (II) PCI: End of PCI scan (II) LoadModule: "scanpci" (II) Loading /usr/X11R6/lib/modules/libscanpci.a (II) Module scanpci: vendor="The XFree86 Project" compiled for 4.0.1, module version = 0.1.0 ABI class: XFree86 Video Driver, version 0.2 (II) UnloadModule: "scanpci" (II) Unloading /usr/X11R6/lib/modules/libscanpci.a (II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x8c (VGA_EN is set) (II) Bus 1 I/O range: [0] -1 0xe000 - 0xe0ff (0x100) IXB [1] -1 0xe400 - 0xe4ff (0x100) IXB [2] -1 0xe800 - 0xe8ff (0x100) IXB [3] -1 0xec00 - 0xecff (0x100) IXB (II) Bus 1 non-prefetchable memory range: [0] -1
Re: [Cooker] 7.2 Problem on Dell Laptop
Kevin Maciunas [EMAIL PROTECTED] writes: I have installed 7.2 on My Dell Inspiron 7000 laptop and now have the following strange behaviour: Leave the machine alone and it hangs - hard! Need to powercycle. Occasionally X crashes (V4). do you have the regulator of the CPU actived ? -- MandrakeSoft Inc http://www.chmouel.org --Chmouel
Re: [Cooker] 7.2 Problem on Dell Laptop
Chmouel Boudjnah wrote: Kevin Maciunas [EMAIL PROTECTED] writes: I have installed 7.2 on My Dell Inspiron 7000 laptop and now have the following strange behaviour: Leave the machine alone and it hangs - hard! Need to powercycle. Occasionally X crashes (V4). do you have the regulator of the CPU actived ? Do you mean the BIOS settings to set the thing to automatically suspend after a period of inactivity? No - it's set to "off". I have never wanted my BIOS to take the laptop away! All this worked 100% under 7.0 and 7.1 (and I think 6.1, but can't quite recall). I haven't changed the BIOS and I just checked it :-). Wow, that was a quick response! /Kevin -- Kevin J. Maciunas [EMAIL PROTECTED] Department of Computer Science PH: +61-8-8303-5586 The University of Adelaide FAX:+61-8-8303-4366 Adelaide 5005 South Australia
Re: [Cooker] 7.2 Problem on Dell Laptop
Kevin Maciunas [EMAIL PROTECTED] writes: Do you mean the BIOS settings to set the thing to automatically suspend after a period of inactivity? No - it's set to "off". I have never wanted my BIOS to take the laptop away! All this worked 100% under 7.0 and 7.1 (and I think 6.1, but can't quite recall). I haven't changed the BIOS and I just checked it :-). have you tried with XFree3 ? -- MandrakeSoft Inc http://www.chmouel.org --Chmouel
Re: [Cooker] 7.2 Problem on Dell Laptop
Chmouel Boudjnah wrote: have you tried with XFree3 ? I tried to try :-) I used the DrakConf tool and when it tried to test the configuration, it just hung - screen went black, then the pale whitish screen you get when it's testing the config but the little dialog box (yes/no it works) never came. I did an init 3 and left the thing alone and it's still running - really does look like XFree4! I'll try a manual installation of 3.3.6 and see what happens (but like I said, it *was* running a (June ish) Xfree4 under 7.1 fine). /Kevin -- Kevin J. Maciunas [EMAIL PROTECTED] Department of Computer Science PH: +61-8-8303-5586 The University of Adelaide FAX:+61-8-8303-4366 Adelaide 5005 South Australia
[Cooker] KDE 2.x updates for 7.2
Hello, I have built a full set of kde 2 rpm's for 7.2 (NOT COOKER). Before I put these into MandrakeUpdate (if we do) I would like to let some people test them. I have made these available on one of my own servers at: ftp://nebsllc.com/pub/KDE_UPDATE The purpose of these updates is some rather large bug fixes and enhancements. It pulls the code up to the level of the code in Cooker (post 2.0). These RPM's will not fix all reported bugs and may contain new ones. Please do not re-report bugs if things still aren't fixed. What I need to know is: 1. Are these valid updates? Do they offer you any improvements, look and feel, functionality? 2. Is anything in them now broken, that wasn't broken before? In other words do they break anything. NOTE: Use these at your own risk! They work on my machines, have no idea what will happen on yours. There is also a new dependency for kdepim on libical, the rpm for this is in the same directory. -Chris
Re: [Cooker] Konqueror
Please see my KDE Updates message in cooker. I am not sure these fix your problem but it contains today's CVS code. -Chris On Tuesday 14 November 2000 14:10, you wrote: You bet, Chris. Thanks, --Doug On Wednesday 15 November 2000 11:58, Christopher Molnar wrote: Doug, I have just shifted some priorities and am trying to get a current KDE build working right now on 7.2. I am hoping that if all goes well I may be able to get something out to everyone this week. If I put together some RPM's are you willing to test for me? -Chris On Tuesday 14 November 2000 13:00, you wrote: Can anybody give an estimate when an updated Konqueror (with java working) might be available for 7.2? Thanks, --Doug
Re: [Cooker] HP 5195 laptop configs
Christopher Molnar [EMAIL PROTECTED] writes:
On Tuesday 14 November 2000 18:39, Chmouel Boudjnah wrote:
Christopher Molnar [EMAIL PROTECTED] writes:
ESS Technology|ES1988 Allegro-1 (MULTIMEDIA_AUDIO unknown)
SubVendor=0x103c SubDevice=0x0012
there could be a driver for your card at :
http://www.zabbo.net/maestro3/
it say it's experimental.
Looks like it may work but I do not have a clue on how to get it to compile.
I tried the way he said to do it and it did not work. Whole bunch of errors.
apply this patch :
--- maestro3.c.chmouTue Nov 14 16:50:59 2000
+++ maestro3.c Tue Nov 14 16:51:02 2000
@@ -104,11 +104,15 @@
#if defined(MODULE) defined(MODVERSIONS)
#include linux/modversions.h
#endif
+#if 0
#define DECLARE_WAITQUEUE(QUEUE,INIT) struct wait_queue QUEUE = {INIT, NULL}
#define wait_queue_head_t struct wait_queue *
+#endif
#define SILLY_PCI_BASE_ADDRESS(PCIDEV) (PCIDEV-base_address[0]
PCI_BASE_ADDRESS_IO_MASK)
#define SILLY_INIT_SEM(SEM) SEM=MUTEX;
+#if 0
#define init_waitqueue_head init_waitqueue
+#endif
#define SILLY_MAKE_INIT(FUNC) __initfunc(FUNC)
#define SILLY_OFFSET(VMA) ((VMA)-vm_offset)
#else
there are already defined in our kernel.
--
MandrakeSoft Inc http://www.chmouel.org
--Chmouel
Is this serieus or silly ???
or both ??
[Cooker] chrooted Bind
Hi, Is it possible to perform an installation of chrooted bind?? That is can I do rpm -ivh --prefix=chroot bind? I have a problem with the updated files for bind. It is not able to perform named-xfers... That is: 1. I have the chroot directory install. 2. Modified /etc/init.d/named so that it reads: daemon named -u named -g named -t chroot 3. Added the file /usr/sbin/named-xfer to chroot/usr/sbin/named-xfer with permissions 0755. 4. Restarted the server and got the message: Nov 14 13:11:49 www named[6343]: chrooted to chroot Nov 14 13:11:49 www named[6343]: group = named Nov 14 13:11:49 www named[6343]: user = named Nov 14 13:11:49 www named[6343]: Ready to answer queries. Nov 14 13:11:49 www named[6346]: can't exec /usr/sbin/named-xfer: Permission denied in syslog 5. How?? Ciao ST Lim
RE: [Cooker] WP2000 and Fonttastic
Try this: http://home.tampabay.rr.com/jandr/Mandrake.htm Mike Armisis Aieoln [EMAIL PROTECTED] writes: The fix is on: http://home.tampabay.rr.com/jandr/Mandrake.html --=-=-= Not Found The requested URL /jandr/Mandrake.html was not found on this server. --=-=-= -- MandrakeSoft Inc http://www.chmouel.org --Chmouel
[Cooker] Anyone installed Netscape 6 successfully?
Sorry for an off-topic question. The installer always halt at the middle of download. Do I need to be root to install? I am using LM7.2
Re: [Cooker] HP 5195 laptop configs
[EMAIL PROTECTED] (andre) writes: Is this serieus or silly ??? or both ?? it serious, we have backported the sound API from 2.2.18pre. -- MandrakeSoft Inc http://www.chmouel.org --Chmouel
Re: [Cooker] chrooted Bind
Lim Swee Tat [EMAIL PROTECTED] writes: Hi, Is it possible to perform an installation of chrooted bind?? That is can I do rpm -ivh --prefix=chroot bind? i think philippe libat (the packager of bind) plan to do it for the default package. -- MandrakeSoft Inc http://www.chmouel.org --Chmouel
Re: [Cooker] KDE 2.x updates for 7.2
Hello, I have built a full set of kde 2 rpm's for 7.2 (NOT COOKER). Before I put these into MandrakeUpdate (if we do) I would like to let some people test them. I have made these available on one of my own servers at: ftp://nebsllc.com/pub/KDE_UPDATE The purpose of these updates is some rather large bug fixes and enhancements. It pulls the code up to the level of the code in Cooker (post 2.0). These RPM's will not fix all reported bugs and may contain new ones. Please do not re-report bugs if things still aren't fixed. What I need to know is: 1. Are these valid updates? Do they offer you any improvements, look and feel, functionality? 2. Is anything in them now broken, that wasn't broken before? In other words do they break anything. NOTE: Use these at your own risk! They work on my machines, have no idea what will happen on yours. There is also a new dependency for kdepim on libical, the rpm for this is in the same directory. -Chris Have some trouble installing kdegames. Get this error [root@root]# rpm -Fvh kdegames-2.0-6mdk.i586.rpm error: failed dependencies: libkdegames.so.1 is needed by kdegames-2.0-6mdk Have no installation-trouble with the others(not that they are all installed)
[Cooker] Help
I are new with Linux, I installed Linux Mandrake Ver.7.0 but it doesnt recognize my Modem(US Robotics PCI 56 WIN) my sound card(Sound Blaster PCI 128)my printer (Cannon BJC 1000) and my video card( Nvidia TNT2). Please are there anybody that can help me?? I dont know what to do... I am a teacher of Acountant, and I dont know to much about Linux, but it is my dream, I want to change Windows for Linux. Thanks!! My name is: Jean Valverde My email is: [EMAIL PROTECTED] _ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. Share information about yourself, create your own public profile at http://profiles.msn.com.
Re: [Cooker] locale-probs after update with last glibc
On Tuesday 14 November 2000 12:22, you wrote: Is konqueror currently working at all? When in KDE I cannot open anything which calls konqueror. I was getting a protocol related error but now nothing. Anybody else getting this? Yep, I'm getting this. See my earlier posting about protocol not supported. I've asked for status from the list, but no response yet. Konqueror is not handling any protocols for me at all. KMail isn't able to do pop any more either. .../Ed -- Ed Wilts, Mounds View, MN, USA mailto:[EMAIL PROTECTED]
Re: [Cooker] 7.2 Problem on Dell Laptop
Chmouel Boudjnah wrote: have you tried with XFree3 ? Thanks to Chmouel for his quick turn around on this. I have manually installed configured the version of XFree3 on the 7.2 CD and it appears to cure the problem. It looks like the version of 4 which ships is in some way incompatable with the ATI Rage Mobility P card in the Dell. Since I'm marking exams right now, I can do some testing for you if you have something you want to try to fix it :-) Also, belatedly, I have to report that the intall went almost perfectly - the test of the X config worked OK but when it returned to the installer, the video was messed up (the image on the LCD was broken and rolling). I guess this should have warned me :-). Overall, the 7.2 installer is a big improvement on the previous incarnations (have done 6 machines so far with it). Thanks again, /Kevin -- Kevin J. Maciunas [EMAIL PROTECTED] Department of Computer Science PH: +61-8-8303-5586 The University of Adelaide FAX:+61-8-8303-4366 Adelaide 5005 South Australia
Re: [Cooker] kernel-2.4.0
it based on test11-pre4 (yes i know pre5 is out), let me know if you have problems. --- be still my beating heart! you mean somebody actually is willing to give the correct kernel version? What is the diffs from kernel.org? If you didn't get too wild i may grab yours and try it Robert L Martin
Re: [Cooker] Help
I are new with Linux, I installed Linux Mandrake Ver.7.0 but it doesnt recognize my Modem(US Robotics PCI 56 WIN): its a WinModem aka a Host Controlled Modem yank it for a real modem (anybody know of a good CBM on a PCI bus (i have an ISA US $60.00)) my sound card(Sound Blaster PCI 128): Hit cheapbytes for a 7.2 cd and or install Harddrake my printer (Cannon BJC 1000): Cups folks any comments??? and my video card( Nvidia TNT2).: Binary drivers only from Nvidia Robert L Martin
RE: [Cooker] KDE 2.x updates for 7.2
I've d/l all rpms and I use rpm -Uvh --test *.rpm to test. No error message. However during actual installation, rpms prints ~20 lines of message, "package catalog not listed in file index." Is it because I am -Upgrading some rpms that are not installed (no previous version to upgrade)? -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Christopher Molnar Sent: Thursday, November 16, 2000 10:24 AM To: [EMAIL PROTECTED] Subject: [Cooker] KDE 2.x updates for 7.2 Hello, I have built a full set of kde 2 rpm's for 7.2 (NOT COOKER). Before I put these into MandrakeUpdate (if we do) I would like to let some people test them. I have made these available on one of my own servers at: ftp://nebsllc.com/pub/KDE_UPDATE The purpose of these updates is some rather large bug fixes and enhancements. It pulls the code up to the level of the code in Cooker (post 2.0). These RPM's will not fix all reported bugs and may contain new ones. Please do not re-report bugs if things still aren't fixed. What I need to know is: 1. Are these valid updates? Do they offer you any improvements, look and feel, functionality? 2. Is anything in them now broken, that wasn't broken before? In other words do they break anything. NOTE: Use these at your own risk! They work on my machines, have no idea what will happen on yours. There is also a new dependency for kdepim on libical, the rpm for this is in the same directory. -Chris
Re: [Cooker] Anyone installed Netscape 6 successfully?
Yes try it again Koma Yu wrote: Sorry for an off-topic question. The installer always halt at the middle of download. Do I need to be root to install? I am using LM7.2
Re: [Cooker] KDE 2.x updates for 7.2
My taskbar icons are screwed andre wrote: Hello, I have built a full set of kde 2 rpm's for 7.2 (NOT COOKER). Before I put these into MandrakeUpdate (if we do) I would like to let some people test them. I have made these available on one of my own servers at: ftp://nebsllc.com/pub/KDE_UPDATE The purpose of these updates is some rather large bug fixes and enhancements. It pulls the code up to the level of the code in Cooker (post 2.0). These RPM's will not fix all reported bugs and may contain new ones. Please do not re-report bugs if things still aren't fixed. What I need to know is: 1. Are these valid updates? Do they offer you any improvements, look and feel, functionality? 2. Is anything in them now broken, that wasn't broken before? In other words do they break anything. NOTE: Use these at your own risk! They work on my machines, have no idea what will happen on yours. There is also a new dependency for kdepim on libical, the rpm for this is in the same directory. -Chris Have some trouble installing kdegames. Get this error [root@root]# rpm -Fvh kdegames-2.0-6mdk.i586.rpm error: failed dependencies: libkdegames.so.1 is needed by kdegames-2.0-6mdk Have no installation-trouble with the others(not that they are all installed)
Re: [Cooker] Menu woes solved by youll never guess....
helix-update On Wednesday 15 November 2000 01:03, you wrote: Where did you get it? It is not listed on their web page. Salane Armisis Aieoln wrote: On Tuesday 14 November 2000 11:32, you wrote: Armisis Aieoln [EMAIL PROTECTED] writes: I was slowly trying to get my menus setup system wide for all my apps... just cause they released 7.2 support at helixcode, I got it it fixed my menu problem weird huh Sorry? Hey thats what software testing is all about GRIN thats why i am always running test software, cause I love the challange of trying to get it working, and I get overly excited when things do work GRIN... dave -- -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- Linux - Cause I dont do windows or ovens! [EMAIL PROTECTED] [EMAIL PROTECTED] [EMAIL PROTECTED] [EMAIL PROTECTED] [EMAIL PROTECTED] -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- Registered System: 83659 -- -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- Linux - Cause I dont do windows or ovens! [EMAIL PROTECTED] [EMAIL PROTECTED] [EMAIL PROTECTED] [EMAIL PROTECTED] [EMAIL PROTECTED] -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- Registered System: 83659
Re: [Cooker] WP2000 and Fonttastic
woops itmoved http://home.tampabay.rr.com/jandr/wpo00.htm On Wednesday 15 November 2000 01:14, you wrote: Armisis Aieoln [EMAIL PROTECTED] writes: The fix is on: http://home.tampabay.rr.com/jandr/Mandrake.html --=-=-= Not Found The requested URL /jandr/Mandrake.html was not found on this server. --=-=-= -- -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- Linux - Cause I dont do windows or ovens! [EMAIL PROTECTED] [EMAIL PROTECTED] [EMAIL PROTECTED] [EMAIL PROTECTED] [EMAIL PROTECTED] -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- Registered System: 83659
[Cooker] rpm and wv problems in 7.2
Hi I have big problems with LM7.2, I was about to upgrade gnome to the official helix-gnome to install evolution. However this dont work for me, the problems seems to be in rpm. It just seems to fail during both upgrade and removal of packages. I have tried from a X environment but also from a console. Both attempts failing, the X environment chrashed for me once, the other times rpm just quits with the message 'Killed'. The wv package I have problem with wvText, it doesn't give the correct output. wvHtml however does give a good output, I also cant find wvLatex, wvPs and wvDvi. This might just be an old version, I haven't looked that close. But please help me with the rpm problem!!! Info: Pentium 133 Mem 80M Clean installation of LM7.2 (Hand picked the packages one by one) well that should be all of interest... //Snaggen -- Mattias Eriksson E-mail: [EMAIL PROTECTED] Tvistevägen 26 [EMAIL PROTECTED] 907 36 UMEA Tel:090-198800 SWEDEN 070-5636769 'I don't fight for a cause Hemsida: http://www.acc.umu.se/~snaggen I fight for the fight' PGP: http://www.acc.umu.se/~snaggen/snaggen.asc
