Re: [Cooker] perl-Magick relocation error

[Abel Cheung]

On 2003-11-18(Tue) 09:24:30 +0100, Giuseppe Ghibà wrote:
> >>/usr/bin/perl: relocation error:
> >>/usr/lib/perl5/site_perl/5.8.1/i386-linux-thread-multi/auto/Image/Magick/Magick.so:
> >>undefined symbol: InitializeMagick
> 
> It's due to change perl 5.8.1 -> perl 5.8.2? Rebuilding the
> package would help?

Looking at the output of ldd, it seems that Magick.so is not linking
with libMagick at all. Sounds like something wrong...

Abel

> 
> Bye.
> Giuseppe.
> 
> 
> 

-- 
Abel Cheung
Linux counter #256983   | http://counter.li.org
GPG Key: (0xC67186FF)   | http://deaddog.org/gpg.asc
Key fingerprint: 671C C7AE EFB5 110C D6D1  41EE 4152 E1F1 C671 86FF


pgp0.pgp
Description: PGP signature

Re: [Cooker] perl-Magick relocation error

[Giuseppe Ghibò]

Thierry Vignaud wrote:

Gary Walsh <[EMAIL PROTECTED]> writes:


I am trying to run the BINS web photo album program and I get the
following perl error:
/usr/bin/perl: relocation error:
/usr/lib/perl5/site_perl/5.8.1/i386-linux-thread-multi/auto/Image/Magick/Magick.so:
undefined symbol: InitializeMagick
What is a relocation error?


the linker cannot relocate symbol => the package needs to be rebuild
and relinked with current version of imagemagick libraries
It's due to change perl 5.8.1 -> perl 5.8.2? Rebuilding the
package would help?
Bye.
Giuseppe.

Re: [Cooker] perl-Magick relocation error

[Gary Walsh]

Guillaume Rousse wrote:
Ainsi parlait Gary Walsh :

Thierry Vignaud wrote:


Gary Walsh <[EMAIL PROTECTED]> writes:




I am trying to run the BINS web photo album program and I get the
following perl error:
/usr/bin/perl: relocation error:
/usr/lib/perl5/site_perl/5.8.1/i386-linux-thread-multi/auto/Image/Magick/
Magick.so:
 undefined symbol: InitializeMagick
Are you sure you're using the mdk build of perl-Magick, and not the plf 
build ? I've seen similar problems already.

Yes, I am using the latest build from cooker.

What is a relocation error?


the linker cannot relocate symbol => the package needs to be rebuild
and relinked with current version of imagemagick libraries


I have the latest rpm from cooker.  There doesn't seem to be an SRPM on 
the cooker mirrors, so I can't rebuild it myself.
It is part of the ImageMagick package.
I finally figured that out, but a recompile on my system didn't change 
anything.

--
Gary Walsh  Kitchener, Ontario, Canada
[EMAIL PROTECTED]   http://www.oeone.net/gwalsh

Re: [Cooker] perl-Magick relocation error

[Guillaume Rousse]

Ainsi parlait Gary Walsh :
> Thierry Vignaud wrote:
>
> > Gary Walsh <[EMAIL PROTECTED]> writes:
> > 
> > 
> >
> >>I am trying to run the BINS web photo album program and I get the
> >>following perl error:
> >>
> >>/usr/bin/perl: relocation error:
> >>/usr/lib/perl5/site_perl/5.8.1/i386-linux-thread-multi/auto/Image/Magick/
> >>Magick.so:
 undefined symbol: InitializeMagick
Are you sure you're using the mdk build of perl-Magick, and not the plf 
build ? I've seen similar problems already.

> >>What is a relocation error?
> >
> > 
> > 
> > the linker cannot relocate symbol => the package needs to be rebuild
> > and relinked with current version of imagemagick libraries
> > 
>
> 
> I have the latest rpm from cooker.  There doesn't seem to be an SRPM on 
> the cooker mirrors, so I can't rebuild it myself.
It is part of the ImageMagick package.
-- 
Any line, wire, or cloth cut to length will be too short
-- Dimensions General Shefields Corollaries n°1

Re: [Cooker] perl-Magick relocation error

[Gary Walsh]

Thierry Vignaud wrote:
Gary Walsh <[EMAIL PROTECTED]> writes:


I am trying to run the BINS web photo album program and I get the
following perl error:
/usr/bin/perl: relocation error:
/usr/lib/perl5/site_perl/5.8.1/i386-linux-thread-multi/auto/Image/Magick/Magick.so:
undefined symbol: InitializeMagick
What is a relocation error?


the linker cannot relocate symbol => the package needs to be rebuild
and relinked with current version of imagemagick libraries
I have the latest rpm from cooker.  There doesn't seem to be an SRPM on 
the cooker mirrors, so I can't rebuild it myself.

--
Gary Walsh  Kitchener, Ontario, Canada
[EMAIL PROTECTED]   http://www.oeone.net/gwalsh

Re: [Cooker] perl-Magick relocation error

[Thierry Vignaud]

Gary Walsh <[EMAIL PROTECTED]> writes:

> I am trying to run the BINS web photo album program and I get the
> following perl error:
> 
> /usr/bin/perl: relocation error:
> /usr/lib/perl5/site_perl/5.8.1/i386-linux-thread-multi/auto/Image/Magick/Magick.so:
> undefined symbol: InitializeMagick
> 
> What is a relocation error?

the linker cannot relocate symbol => the package needs to be rebuild
and relinked with current version of imagemagick libraries

[Cooker] perl-Magick relocation error

[Gary Walsh]

I am trying to run the BINS web photo album program and I get the 
following perl error:

/usr/bin/perl: relocation error: 
/usr/lib/perl5/site_perl/5.8.1/i386-linux-thread-multi/auto/Image/Magick/Magick.so: 
undefined symbol: InitializeMagick

What is a relocation error?

--
Gary Walsh  Kitchener, Ontario, Canada
[EMAIL PROTECTED]   http://www.oeone.net/gwalsh

Re: [Cooker] perl-5.8.2-1mdk broken

[Pixel]

Luca Berra <[EMAIL PROTECTED]> writes:

> On Mon, Nov 10, 2003 at 09:23:37PM +, Stephen Pickering wrote:
> >Installed perl-5.8.2-1mdk & perl-base-5.8.2-1mdk which broke rpmdrake,
> >urpmi, Mandrake Control Center, etc . . .
> >
> >Error was that all mandrake perl scripts could not locate MDK/Common.pm
> >
> >Solution was to re-install perl-5.8.1-1mdk & perl-base-5.8.1-1mdk
> >
> Should we try to install some module in the unversioned perl lib
> directories? there is no way to find them from perl -V, but those are in
> @INC.

my fault :-(

you can have things working again by setting:

  
PERL5LIB=/usr/lib/perl5/vendor_perl/5.8.1:/usr/lib/perl5/vendor_perl/5.8.1/i386-linux-thread-multi
 

(of course adapt to your arch if you're not on i386)


rebuilding a new perl fixing this broken backward compatibility pb.

sorry for the trouble

Re: [Cooker] perl-5.8.2-1mdk broken

[Pixel]

[EMAIL PROTECTED] writes:

> Tried to rebuild perl-MDK-Common, but it breaks:
> 
> make[2]: Entering directory `/usr/src/RPM/BUILD/perl-MDK-Common/perl_checker.src'
> making ._ncdi/parser.di from parser.mli
> making ._ncdi/types.di from types.mli
> making ._d/parser.d from parser.ml
> File "parser.mly", line 480, characters 0-2:
> Syntax error

fixed in CVS (removed a ";;")

OCaml guys don't like backward compatibility, maybe one day...

Re: [Cooker] perl-5.8.2-1mdk broken

[J.A. Magallon]

On 11.10, Stephen Pickering wrote:
> Installed perl-5.8.2-1mdk & perl-base-5.8.2-1mdk which broke rpmdrake,
> urpmi, Mandrake Control Center, etc . . .
> 
> Error was that all mandrake perl scripts could not locate MDK/Common.pm
> 
> Solution was to re-install perl-5.8.1-1mdk & perl-base-5.8.1-1mdk
> 

If you are anxious about urpmi, I rebuilt everything I needed to get urpmi
working under 5.8.2:

http://giga.cps.unizar.es/~magallon/linux/rpm/

Get perl-* , urpmi-* and gurpmi-*

-- 
J.A. Magallon  \ Software is like sex:
werewolf!able!es \   It's better when it's free
Mandrake Linux release 10.0 (Cooker) for i586
Linux 2.4.23-pre9-jam1 (gcc 3.3.1 (Mandrake Linux 9.2 3.3.1-4mdk))

Re: [Cooker] perl-5.8.2-1mdk broken

[Luca Berra]

On Mon, Nov 10, 2003 at 09:23:37PM +, Stephen Pickering wrote:
Installed perl-5.8.2-1mdk & perl-base-5.8.2-1mdk which broke rpmdrake,
urpmi, Mandrake Control Center, etc . . .
Error was that all mandrake perl scripts could not locate MDK/Common.pm

Solution was to re-install perl-5.8.1-1mdk & perl-base-5.8.1-1mdk

Should we try to install some module in the unversioned perl lib
directories? there is no way to find them from perl -V, but those are in
@INC.
L.

--
Luca Berra -- [EMAIL PROTECTED]
   Communication Media & Services S.r.l.
/"\
\ / ASCII RIBBON CAMPAIGN
 XAGAINST HTML MAIL
/ \

Re: [Cooker] perl-5.8.2-1mdk broken

[Stefan van der Eijk]

Tried to rebuild perl-MDK-Common, but it breaks:

make[2]: Entering directory `/usr/src/RPM/BUILD/perl-MDK-Common/perl_checker.src'
making ._ncdi/parser.di from parser.mli
making ._ncdi/types.di from types.mli
making ._d/parser.d from parser.ml
File "parser.mly", line 480, characters 0-2:
Syntax error
make[2]: *** [._d/parser.d] Error 2
make[2]: *** Deleting file `._d/parser.d'
$ rpm -q ocaml
ocaml-3.07-1mdk
-o-
kk1
True, probably unrelated to the new perl as slbd tried to build it on 
07-Nov-2003 03:52:

http://eijk.homelinux.org/build/cooker/i586/problem/perl-MDK-Common-1.1.8-1mdk

Stefan

Installed perl-5.8.2-1mdk & perl-base-5.8.2-1mdk which broke rpmdrake,
urpmi, Mandrake Control Center, etc . . .
Error was that all mandrake perl scripts could not locate MDK/Common.pm

Solution was to re-install perl-5.8.1-1mdk & perl-base-5.8.1-1mdk

--
Rgds,
Steve


smime.p7s
Description: S/MIME Cryptographic Signature

Re: [Cooker] perl-5.8.2-1mdk broken

[kelk1]

Tried to rebuild perl-MDK-Common, but it breaks:

make[2]: Entering directory `/usr/src/RPM/BUILD/perl-MDK-Common/perl_checker.src'
making ._ncdi/parser.di from parser.mli
making ._ncdi/types.di from types.mli
making ._d/parser.d from parser.ml
File "parser.mly", line 480, characters 0-2:
Syntax error
make[2]: *** [._d/parser.d] Error 2
make[2]: *** Deleting file `._d/parser.d'

$ rpm -q ocaml
ocaml-3.07-1mdk
-o-
kk1
> Installed perl-5.8.2-1mdk & perl-base-5.8.2-1mdk which broke rpmdrake,
> urpmi, Mandrake Control Center, etc . . .
> 
> Error was that all mandrake perl scripts could not locate MDK/Common.pm
> 
> Solution was to re-install perl-5.8.1-1mdk & perl-base-5.8.1-1mdk
> 
> -- 
> Rgds,
> Steve
> 
> 

[Cooker] perl-5.8.2-1mdk broken

[Stephen Pickering]

Installed perl-5.8.2-1mdk & perl-base-5.8.2-1mdk which broke rpmdrake,
urpmi, Mandrake Control Center, etc . . .

Error was that all mandrake perl scripts could not locate MDK/Common.pm

Solution was to re-install perl-5.8.1-1mdk & perl-base-5.8.1-1mdk

-- 
Rgds,
Steve

[Cooker] perl-libwww-perl-5.75-1mdk error

[s]

after updating last night I've started getting this error when trying 
to run the perl/libwww module:

syntax error 
at /usr/lib/perl5/vendor_perl/5.8.1/HTTP/Request/Common.pm line 95, 
near "} else"

anyone else seeing this?

perl-Gtk2-0.95-6mdk
perl-Expect-1.15-6mdk
perl-Term-Readline-Gnu-1.14-4mdk
perl-5.8.1-1mdk
perl-HTML-Parser-3.34-1mdk
perl-File-Slurp-2002.1031-3mdk
perl-Glib-0.95-3mdk
perl-Locale-gettext-1.01-9mdk
perl-CGI-3.00-1mdk
perl-MailTools-1.59-2mdk
perl-IO-stringy-2.108-6mdk
perl-MIME-tools-5.411-6mdk
perl-Crypt-SSLeay-0.51-2mdk
perl-MDK-Common-1.1.8-1mdk
perl-URPM-0.94-7mdk
perl-HTML-Tagset-3.03-7mdk
perl-URI-1.25-1mdk
perl-TimeDate-1.16-3mdk
perl-Authen-PAM-0.14-3mdk
perl-base-5.8.1-1mdk
perl-libwww-perl-5.75-1mdk
perl-Net_SSLeay-1.25-1mdk
perl-IO-Tty-1.02-8mdk
perl-devel-5.8.1-1mdk

thanks,
-srlinuxx

[Cooker] perl-MIME-tools-5.411-6mdk breaks sympa (9.2)

[Marc Lijour (Professeur d'Informatique)]

(Before posting here I tried bugzilla, but it bugged me "grave"!
It refuses to post... Anyway.)


perl-MIME-tools-5.411-4mdk is working fine (last version from Bamboo). 
 
After an update to 9.2, sympa breaks. sympa.pl dies immediately. 
 
#sympa -d  
Processing /var/spool/sympa/msg/[EMAIL PROTECTED] with  
priority 1 
DoFile(/var/spool/sympa/msg/[EMAIL PROTECTED]) 
Message::new(/var/spool/sympa/msg/[EMAIL PROTECTED]) 
Can't locate MIME/Decoder/NBit.pm in @INC (@INC contains: /usr/lib/sympa/bin  
/usr/lib/perl5/5.8.1/i386-linux-thread-multi /usr/lib/perl5/5.8.1  
/usr/lib/perl5/site_perl/5.8.1/i386-linux-thread-multi  
/usr/lib/perl5/site_perl/5.8.1 /usr/lib/perl5/site_perl/5.6.1  
/usr/lib/perl5/site_perl/5.6.0 /usr/lib/perl5/site_perl  
/usr/lib/perl5/vendor_perl/5.8.1/i386-linux-thread-multi  
/usr/lib/perl5/vendor_perl/5.8.1  
/usr/lib/perl5/vendor_perl/5.8.0/i386-linux-thread-multi  
/usr/lib/perl5/vendor_perl/5.8.0 /usr/lib/perl5/vendor_perl .) at  
/usr/lib/perl5/vendor_perl/5.8.1/MIME/Decoder.pm line 171,  line 23. 
 
[EMAIL PROTECTED] bin]# ll /usr/lib/perl5/vendor_perl/5.8.1/MIME/Decoder/NBit.pm 
-rw-r--r--1 root root 4563 Nov  4  2000  
/usr/lib/perl5/vendor_perl/5.8.1/MIME/Decoder/NBit.pm 
 
(The package is installed and the file seem to be there). 
Can't do more... 
Regards,  
marc at lijour dot net 

[Cooker] perl-libwww-perl

[Tibor Pittich]

who is maintainer of perl-libwww-perl package ? it needs rebuild for
perl 5.8.1...

-- 
member of Advanced InternetWorks group  -> http://www.ainetworks.sk
professional home page  -> http://tibor.pittich.sk
personal home page  -> http://c0re.phuture.sk


pgp0.pgp
Description: PGP signature

Re: [Cooker] perl automatic provides again

[Luca Berra]

On Sun, Oct 05, 2003 at 04:54:07PM +0200, Luca Berra wrote:
hi,
today i found two packages that provide half of perl.
psad-1.2.3-1mdl from contrib and
wml-2.0.9 from MAIN  <
A fix for this kind of problems could be having perl autoprovides
generated only for files in default @INC, but it would create
problems for packages that require modules in other places.
also modifying the autorequire script not to issue requires for modules
that are provided by files anywhere in the package
i still believe that psad and wml are broken, they should not include
perl modules that are provided in their own package.
Regards,
L.
--
Luca Berra -- [EMAIL PROTECTED]
   Communication Media & Services S.r.l.
/"\
\ / ASCII RIBBON CAMPAIGN
 XAGAINST HTML MAIL
/ \

[Cooker] perl automatic provides again

[Luca Berra]

hi,
today i found two packages that provide half of perl.
psad-1.2.3-1mdl from contrib and
wml-2.0.9 from MAIN  <
RG

psad has perl modules in /usr/lib/psad/i386-linux
wml has perl modules in /usr/lib/wml/perl/lib
so perl.prov finds those, but perl does NOT
grumble!

this is an example of what i found, but the problem is not limited to
this.
perl(Date::Calc) is provided by both perl-Date-Calc and psad (from
contrib)
perl-Date-Calc from main autorequires perl(Bit::Vector) which is
provided by wml, but it won't work anyway
for the perl-Date-Calc i built fixed RPMS which are available at 
http://percy.comedia.it/~bluca/cooker/perl
you need all three of perl-Date-Calc perl-Bit-Vector perl-Carp-Clan,
since Carp::Clan is used by both the other two, and I split it in its own
package
these should go into updates for 9.2!

i'd open a bug on bugzilla, but i do not have the time to check for all
broken packages,
urpmf '\.pm$' |grep -v -e '/usr/lib/perl5/' -e '/usr/share/doc'
will give you an idea of packages that should be checked
regards,
L.
--
Luca Berra -- [EMAIL PROTECTED]
   Communication Media & Services S.r.l.
/"\
\ / ASCII RIBBON CAMPAIGN
 XAGAINST HTML MAIL
/ \

[Cooker] perl-Net-Server-0.85-3mdk

[Luca Berra]

perl-Net-Server-0.85-2mdk -> perl-Net-Server-0.85-3mdk
 * Thu Sep 04 2003 Lenny Cartier <[EMAIL PROTECTED]> 0.85-3mdk
 - requires perl-IO-Multiplex
why?
perl automatic requires already required that in 2mdk
I even provided a perl-IO-Multiplex a couple of weeks ago, which was
promptly ignored :(
regards,
L.
--
Luca Berra -- [EMAIL PROTECTED]
   Communication Media & Services S.r.l.
/"\
\ / ASCII RIBBON CAMPAIGN
 XAGAINST HTML MAIL
/ \

[Cooker] Perl-Base / Postgresql-PL problem

[Digital Wokan]

Installing perl-5.8.1-0.RC4.2mdk.i586 requires removing 
postgresql-pl-7.3.4-1mdk.i586 due to unsatisfied perl-base == 5.8.1

So I'm guessing RPM doesn't see perl-base-5.8.1-0.RC4.2mdk.i586 as 
providing perl-base == 5.8.1 for some reason.

[Cooker] perl-Net-Server requires perl-IO-Multiplex

[Luca Berra]

which is not in contrib, but can be found at
http://percy.comedia.it/~bluca/cooker/perl/
--
Luca Berra -- [EMAIL PROTECTED]
   Communication Media & Services S.r.l.
/"\
\ / ASCII RIBBON CAMPAIGN
 XAGAINST HTML MAIL
/ \

Re: [Cooker] perl-Razor requires perl-Net-DNS - automatic requiresmissing

[Mark Draheim]

On Wed, 30 Jul 2003 23:37:24 +0200
Mark Draheim <[EMAIL PROTECTED]> wrote:

> 
> or maybe the perl-Net-DNS rpm needs a rebuild?

or apparently perl-Razor needs a rebuild because these are the
automatic Requires after rebuild. Maybe it's to early in the morning but
I don't see any reference to the Resolve of Net-DNS. Ah, and the missing
razor check with spamassassin was due to missing perl-Net-DNS.

rpmlib(PayloadFilesHavePrefix) <= 4.0-1
rpmlib(CompressedFileNames) <= 3.0.4-1
rpmlib(VersionedDependencies) <= 3.0.3-1
perl-base >= 2:5.8.0
perl-base
libc.so.6
libc.so.6(GLIBC_2.0)
libc.so.6(GLIBC_2.1.3)
libc.so.6(GLIBC_2.3)
perl(AutoLoader)
perl(base)
perl(Data::Dumper)
perl(Digest::Nilsimsa)
perl(Digest::SHA1)
perl(DynaLoader)
perl(Errno)
perl(Exporter)
perl(File::Copy)
perl(Getopt::Long)
perl(IO::File)
perl(IO::Select)
perl(IO::Socket)
perl(lib)
perl(MIME::QuotedPrint)
perl(POSIX)
perl(Razor2::Client::Agent)
perl(Razor2::Client::Version)
perl(Razor2::Logger)
perl(Razor2::Preproc::deBase64)
perl(Razor2::Preproc::deHTML)
perl(Razor2::Preproc::deHTMLxs)
perl(Razor2::Preproc::deNewline)
perl(Razor2::Preproc::deQP)
perl(Razor2::Preproc::enBase64)
perl(Razor2::Preproc::Manager)
perl(Razor2::Preproc::VR1)
perl(Razor2::Signature::Ephemeral)
perl(Razor2::String)
perl(Razor2::Syslog)
perl(strict)
perl(Time::HiRes)
perl(URI::Escape)
perl(vars)

[Cooker] perl-Razor requires perl-Net-DNS

[Mark Draheim]

or maybe the perl-Net-DNS rpm needs a rebuild?

[EMAIL PROTECTED] markd]$ razor-admin -discover
nextserver: discover0: bootstrap_discovery:

Can't locate Net/DNS/Resolver.pm in @INC 
BEGIN failed--compilation aborted at (eval 12) line 2.

I got curious because spamassassin stopped printing out razor checks.
Don't know if the missing Net-DNS rpm was the problem. Need to wait for
some more spam to arrive. Can only take a few minutes...

Mark

Re: [Cooker] Perl provides system

[Olivier Thauvin]

Le Jeudi 17 Juillet 2003 14:52, Thierry Vignaud a écrit :
> Olivier Thauvin <[EMAIL PROTECTED]> writes:
> > Some perl script contains 'use file.pl;'
> > Those requirement are not automatically provides.
> > So why not automatically filter in perl-findrequires script
> > ^perl(.*\.pl)$ ?
>
> because sometimes we rely on .pl files from other packages ...

And how to know what provides we have to put on a package ?
Take look to requirement to webmin !
Then, a better way is to provides all .pl files find in package:

provides perl(getopt.pl) is containt getopt.pl
requires perl(getopt.pl) is find:  m/use.*/(.*\.pl).*$/; print perl($1);

-- 
Linux pour Mac !? Enfin le moyen de transformer
une pomme en véritable ordinateur. - JL.
Olivier Thauvin - http://nanardon.homelinux.org/

Re: [Cooker] Perl provides system

[Thierry Vignaud]

Olivier Thauvin <[EMAIL PROTECTED]> writes:

> Some perl script contains 'use file.pl;'
> Those requirement are not automatically provides.
> So why not automatically filter in perl-findrequires script
> ^perl(.*\.pl)$ ?

because sometimes we rely on .pl files from other packages ...

[Cooker] Perl provides system

[Olivier Thauvin]

Some perl script contains 'use file.pl;'
Those requirement are not automatically provides.
So why not automatically filter in perl-findrequires script ^perl(.*\.pl)$ ?
-- 
Linux pour Mac !? Enfin le moyen de transformer
une pomme en véritable ordinateur. - JL.
Olivier Thauvin - http://nanardon.homelinux.org/

[Cooker] perl(Gnome2) is needed by drakconf-9.2-0.6mdk

[francesco.melo]

[...]


Installazione fallita:
perl(Gnome2) is needed by drakconf-9.2-0.6mdk
[EMAIL PROTECTED] vete]# 

[Cooker] perl(this) is needed

[Serge Plüss]

Hi

for the last week and a half I have not been able to update my cooker 
installation. The error message I am getting is the following one:

Installation failed:
  perl(this) is needed by MySQL-bench-4.0.13-2mdk

Anyway I can get passed this?

Probably not related to the above I have now noticed much more information 
being displayed when running urpmi and saw the following lines early in the 
process:

The following packages have to be removed for others to be upgraded:

gimp-extras-1.2.0-5mdk.noarch  (due to missing gimp)
gimpprint-4.2.5-18mdk.i586   (due to missing gimp)
xsane-gimp-0.90-3mdk.i586 (due to missing gimp)

Was just wondering why that says "(due to missing gimp)" as gimp is installed 
and is version 1.2.3-21mdk?

Thanks in advance

SP

[Cooker] perl(File::Slurp) is needed by gimp-1.2.5-1mdk --> please move "perl-File-Slurp-2002.1031-1mdk"to main

[Stefan van der Eijk]

# rpm -Fvh gimp-1.2.5-1mdk.i586.rpm libgimp*
error: Failed dependencies:
   perl(File::Slurp) is needed by gimp-1.2.5-1mdk
# urpmq "perl(File::Slurp)"
perl-File-Slurp
perl-File-Slurp is in contrib, but gimp (which is in main) needs it. 
Please move perl-File-Slurp to main.

Thanks you.

Regards,

Stefan


smime.p7s
Description: S/MIME Cryptographic Signature

[Cooker] Perl Getopt modules

[David Walser]

First off, does anybody use the Getopt::Mixed module we have in contrib?  That module 
was written in 1995 and hasn't been updated since 1995 or 1996.  I believe (correct me 
if I'm wrong) that the Getopt::Long module that ships with perl does everything that 
module does.

Second off, I just reported a bug in Getopt::Long to the author, and he's going to fix 
it.  Since it's part of the perl package itself, would it be possible when he fixes it 
and releases the next version (I guess it'll hit CPAN) to update it in our Perl 
package?

Thanks.

[Cooker] perl-XML-LibXML

[dams]

hello

in 9.1, and possibly in cooker, perl-XML-LibXML is packaged to work with the
libxml2 of the distribution, version libxml2-2.5.4.

The problem is that this version of libxml2 is known to not work correctly with
the perl binding. If you try to install perl-XML-LibXML from cpan, it will say
that you have no libxml2 installed, because in fact, the Makefile.PL has a
blacklist of know libxml2 version that don't work. 2.5.4 is one of them.

the resulting perl-XML-LibXML (and common, and possibly other perl binding)
doesn't work in many cases, and the errors are not obvious ( most of the times
segfaults of the libxml2 lib).

The solutions could be to provide a libxml2 that is know to work, and package
the perl binding against it. Maybe have 2 version of libxml2 : one for C, and
another for perl binding. I'm convinced that this problem is not restricted to
libxml2. We could try to maintain a library blacklist as they do in the CPAN
perl-XML-LibXml Makefile.PL.

By the way, if you don't have time to repackage the whole thing, I can try to
do it, but I think it has t be decided what to be done : don't change anything,
put an older libxml2 in the distro, or have 2 libxml2, one for C, one for perl.

my 2 cents

-- 
dams

Re: [Cooker] perl(the) & MySQL-client-4.0.13-1mdk

[Oden Eriksson]

torsdagen den 5 juni 2003 13.29 skrev Warly:
> Oden Eriksson <[EMAIL PROTECTED]> writes:
> > Hi
> >
> > I think I've found what is triggering /usr/lib/rpm/perl.req to think a
> > perl(the) module is needed..., and the answer is "use the".
> >
> > rpm -qp --qf "[%{requirename}\n]" MySQL-client-4.0.13-1mdk.i586.rpm |
> > grep the perl(the)
> >
> > grep "use the" /usr/bin/mysqlaccess
> > use the option --old_server.
> > #When matching, use the first found match.
> >
> >
> > I tried this hack but it didn't work:
> >
> > %global __perl_requires /usr/lib/rpm/perl.req $* | sed -e '/perl(the)/d'
> >
> > It's currently impossible to install mysql on klama because of this...
>
> Put
>
> %define _requires_exceptions perl(the)
>
> in the spec.

Awesome!

-- 
Regards // Oden Eriksson, Deserve-IT.com

Re: [Cooker] perl(the) & MySQL-client-4.0.13-1mdk

[Warly]

Oden Eriksson <[EMAIL PROTECTED]> writes:

> Hi
>
> I think I've found what is triggering /usr/lib/rpm/perl.req to think a 
> perl(the) module is needed..., and the answer is "use the".
>
> rpm -qp --qf "[%{requirename}\n]" MySQL-client-4.0.13-1mdk.i586.rpm | grep the
> perl(the)
>
> grep "use the" /usr/bin/mysqlaccess
> use the option --old_server.
> #When matching, use the first found match.
>
>
> I tried this hack but it didn't work:
>
> %global __perl_requires /usr/lib/rpm/perl.req $* | sed -e '/perl(the)/d'
>
> It's currently impossible to install mysql on klama because of this...

Put

%define _requires_exceptions perl(the)

in the spec.

-- 
Warly

Re: [Cooker] perl-base = 5.8.0 is needed by (installed)gaim-0.62-2mdk

[Thibaut Fernagut]

On Wed, 4 Jun 2003 09:25:45 -0700
Serge Plüss <[EMAIL PROTECTED]> wrote:

> 
> On Tuesday 03 June 2003 06:20, Robert Kulagowski wrote:
> > -BEGIN PGP SIGNED MESSAGE-
> > Hash: SHA1
> >
> > 
> >
> > Installation failed:
> > perl-base = 5.8.0 is needed by (installed) gaim-0.62-2mdk
> > perl-base = 5.8.0 is needed by (installed) gaim-0.62-2mdk
> > [EMAIL PROTECTED] root]# urpmi gaim
> > Everything already installed
> > [EMAIL PROTECTED] root]# urpmi perl-base
> > To satisfy dependencies, the following packages are going to be
> > installed (20 MB):
> > perl-5.8.0-24mdk.i586
> > perl-base-5.8.0-24mdk.i586
> > perl-devel-5.8.0-24mdk.i586
> > Is this OK? (Y/n) y
> > The following packages have bad signatures:
> > /var/cooker/mirror.mcs.anl.gov/pub/Mandrake-devel/cooker/i586/Mandrake
> > /RPMS/perl-5.8.0-24mdk.i586.rpm
> > /var/cooker/mirror.mcs.anl.gov/pub/Mandrake-devel/cooker/i586/Mandrake
> > /RPMS/perl-devel-5.8.0-24mdk.i586.rpm
> > /var/cooker/mirror.mcs.anl.gov/pub/Mandrake-devel/cooker/i586/Mandrake
> > /RPMS/perl-base-5.8.0-24mdk.i586.rpm
> > Do you want to continue installation ? (y/N) y
> > installing
> > /var/cooker/mirror.mcs.anl.gov/pub/Mandrake-devel/cooker/i586/Mandrake
> > /RPMS/perl-5.8.0-24mdk.i586.rpm
> > /var/cooker/mirror.mcs.anl.gov/pub/Mandrake-devel/cooker/i586/Mandrake
> > /RPMS/perl-devel-5.8.0-24mdk.i586.rpm
> > /var/cooker/mirror.mcs.anl.gov/pub/Mandrake-devel/cooker/i586/Mandrake
> > /RPMS/perl-base-5.8.0-24mdk.i586.rpm
> >
> > Installation failed:
> > perl-base = 5.8.0 is needed by (installed) gaim-0.62-2mdk
> > perl-base = 5.8.0 is needed by (installed) gaim-0.62-2mdk
> > [EMAIL PROTECTED] root]# rpm -qa|grep perl-base
> > perl-base-5.8.0-23mdk
> >
> > -BEGIN PGP SIGNATURE-
> > Version: PGPfreeware 7.0.3 for non-commercial use 
> >
> > iQA/AwUBPtygsPc1NpCTlP0JEQInwQCeNf+A1LPXGA3fOeGRSe8hQASt+SsAnjJk
> > ksXhQkEv4RwsbCvD6Iwlb0O1
> > =TxRG
> > -END PGP SIGNATURE-
> 
> Hi
> 
> as for the third day in a row this is still happening for urpmi --auto-select 
> --auto. Last successful update I was able to do was last friday:
> 
> Installation failed:
> perl = 5.8.0 is needed by (installed) mod_perl-common-1.3.27_1.27-7mdk
> perl-base = 5.8.0 is needed by (installed) gaim-0.62-2mdk
> perl-base = 5.8.0 is needed by (installed) gaim-0.62-2mdk
> 
> Serge
> 

And for irssi

Installation failed:
perl-base = 5.8.0 is needed by (installed) irssi-0.8.6-2mdk


Cheers

-- 
Thibaut Fernagut, Director of Security
 
Burning Frog  - I.T. Services To Set Your World On Fire
Doornstraat 32, B-8970, Poperinge, Belgium
Tel: +32 (0)57 332967 Fax: +32 (0)57 332967 Mobile: +32 (0)473 774334
Email : [EMAIL PROTECTED]   Web: http://www.burningfrog.be

Re: [Cooker] perl-base = 5.8.0 is needed by (installed) gaim-0.62-2mdk

[Buchan Milne]

-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1

Serge Plüss wrote:
>
> as for the third day in a row this is still happening for urpmi
- --auto-select
> --auto. Last successful update I was able to do was last friday:
>
> Installation failed:
> perl = 5.8.0 is needed by (installed)
mod_perl-common-1.3.27_1.27-7mdk
> perl-base = 5.8.0 is needed by (installed) gaim-0.62-2mdk
> perl-base = 5.8.0 is needed by (installed) gaim-0.62-2mdk

# urpme gaim mod_perl-common --auto
# urpmi perl
# urpmi gaim mod_perl-common

Some wierd issue no-one has found the cause of ..

- --
|--Another happy Mandrake Club member--|
Buchan MilneMechanical Engineer, Network Manager
Cellphone * Work+27 82 472 2231 * +27 21 8828820x202
Stellenbosch Automotive Engineering http://www.cae.co.za
GPG Key   http://ranger.dnsalias.com/bgmilne.asc
1024D/60D204A7 2919 E232 5610 A038 87B1 72D6 AC92 BA50 60D2 04A7
-BEGIN PGP SIGNATURE-
Version: GnuPG v1.2.2 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org

iD8DBQE+3jCxrJK6UGDSBKcRAouxAKCje8Ay7Jyh7KUXPcIQONxy4pc/CgCeOs8P
VvIdVklbznz3E9ZqeTsv3fg=
=4+Se
-END PGP SIGNATURE-

**
Please click on http://www.cae.co.za/disclaimer.htm to read our
e-mail disclaimer or send an e-mail to [EMAIL PROTECTED] for a copy.
**

Re: [Cooker] perl(the) & MySQL-client-4.0.13-1mdk

[Oden Eriksson]

tisdagen den 3 juni 2003 21.29 skrev R.I.P. Deaddog:
> On 2003-06-03(Tue) 21:09:31 +0200, Oden Eriksson wrote:
> > I think I've found what is triggering /usr/lib/rpm/perl.req to think a
> > perl(the) module is needed..., and the answer is "use the".
> >
> > rpm -qp --qf "[%{requirename}\n]" MySQL-client-4.0.13-1mdk.i586.rpm |
> > grep the perl(the)
> >
> > grep "use the" /usr/bin/mysqlaccess
> > use the option --old_server.
> > #When matching, use the first found match.
> >
> >
> > I tried this hack but it didn't work:
>
> Yup, probably you're true; the regex matching of "use ." is not
> perfect. Can you try the attached patch on perl.req, and check perl dep
> again?

No I can't if not installing cooker to be root.

Have you tried this and it worked on cooker?

-- 
Regards // Oden Eriksson, Deserve-IT.com

Re: [Cooker] perl-base = 5.8.0 is needed by (installed) gaim-0.62-2mdk

[Serge Plüss]

On Tuesday 03 June 2003 06:20, Robert Kulagowski wrote:
> -BEGIN PGP SIGNED MESSAGE-
> Hash: SHA1
>
> 
>
> Installation failed:
> perl-base = 5.8.0 is needed by (installed) gaim-0.62-2mdk
> perl-base = 5.8.0 is needed by (installed) gaim-0.62-2mdk
> [EMAIL PROTECTED] root]# urpmi gaim
> Everything already installed
> [EMAIL PROTECTED] root]# urpmi perl-base
> To satisfy dependencies, the following packages are going to be
> installed (20 MB):
> perl-5.8.0-24mdk.i586
> perl-base-5.8.0-24mdk.i586
> perl-devel-5.8.0-24mdk.i586
> Is this OK? (Y/n) y
> The following packages have bad signatures:
> /var/cooker/mirror.mcs.anl.gov/pub/Mandrake-devel/cooker/i586/Mandrake
> /RPMS/perl-5.8.0-24mdk.i586.rpm
> /var/cooker/mirror.mcs.anl.gov/pub/Mandrake-devel/cooker/i586/Mandrake
> /RPMS/perl-devel-5.8.0-24mdk.i586.rpm
> /var/cooker/mirror.mcs.anl.gov/pub/Mandrake-devel/cooker/i586/Mandrake
> /RPMS/perl-base-5.8.0-24mdk.i586.rpm
> Do you want to continue installation ? (y/N) y
> installing
> /var/cooker/mirror.mcs.anl.gov/pub/Mandrake-devel/cooker/i586/Mandrake
> /RPMS/perl-5.8.0-24mdk.i586.rpm
> /var/cooker/mirror.mcs.anl.gov/pub/Mandrake-devel/cooker/i586/Mandrake
> /RPMS/perl-devel-5.8.0-24mdk.i586.rpm
> /var/cooker/mirror.mcs.anl.gov/pub/Mandrake-devel/cooker/i586/Mandrake
> /RPMS/perl-base-5.8.0-24mdk.i586.rpm
>
> Installation failed:
> perl-base = 5.8.0 is needed by (installed) gaim-0.62-2mdk
> perl-base = 5.8.0 is needed by (installed) gaim-0.62-2mdk
> [EMAIL PROTECTED] root]# rpm -qa|grep perl-base
> perl-base-5.8.0-23mdk
>
> -BEGIN PGP SIGNATURE-
> Version: PGPfreeware 7.0.3 for non-commercial use 
>
> iQA/AwUBPtygsPc1NpCTlP0JEQInwQCeNf+A1LPXGA3fOeGRSe8hQASt+SsAnjJk
> ksXhQkEv4RwsbCvD6Iwlb0O1
> =TxRG
> -END PGP SIGNATURE-

Hi

as for the third day in a row this is still happening for urpmi --auto-select 
--auto. Last successful update I was able to do was last friday:

Installation failed:
perl = 5.8.0 is needed by (installed) mod_perl-common-1.3.27_1.27-7mdk
perl-base = 5.8.0 is needed by (installed) gaim-0.62-2mdk
perl-base = 5.8.0 is needed by (installed) gaim-0.62-2mdk

Serge

Re: [Cooker] perl(the) & MySQL-client-4.0.13-1mdk

[Luca Berra]

On Wed, Jun 04, 2003 at 03:29:42AM +0800, R.I.P. Deaddog wrote:
Yup, probably you're true; the regex matching of "use ." is not
perfect. Can you try the attached patch on perl.req, and check perl dep
again?
what about skipping here-docs as we skip documentation?
(yes, that's messy but since perl allows you to nest heredocs)
rgrds,
L.
--- /usr/lib/rpm/perl.req   2003-05-13 17:07:19.0 +0200
+++ perl.req2003-06-03 22:46:07.0 +0200
@@ -93,6 +93,13 @@
if ( (m/^=(over)/) .. (m/^=(back)/) ) {
  next;
}
+
+# skip heredocs
+if ( (m/.*<<\s*[\"\']?(\w+)[\"\']?\s*[,\);]/) .. (m/^$tarocco$/) ) {
+  if (m/.*<<\s*[\"\']?(\w+)[\"\']?\s*[,\);]/) { $tarocco=$1 }
+  next;
+}
+$tarocco="";
# skip the data section
if (m/^__(DATA|END)__$/) {
--
Luca Berra -- [EMAIL PROTECTED]
   Communication Media & Services S.r.l.
/"\
\ / ASCII RIBBON CAMPAIGN
 XAGAINST HTML MAIL
/ \

Re: [Cooker] perl(the) & MySQL-client-4.0.13-1mdk

[R.I.P. Deaddog]

On 2003-06-03(Tue) 21:09:31 +0200, Oden Eriksson wrote:
> I think I've found what is triggering /usr/lib/rpm/perl.req to think a 
> perl(the) module is needed..., and the answer is "use the".
> 
> rpm -qp --qf "[%{requirename}\n]" MySQL-client-4.0.13-1mdk.i586.rpm | grep the
> perl(the)
> 
> grep "use the" /usr/bin/mysqlaccess
> use the option --old_server.
> #When matching, use the first found match.
> 
> 
> I tried this hack but it didn't work:

Yup, probably you're true; the regex matching of "use ." is not
perfect. Can you try the attached patch on perl.req, and check perl dep
again?

Abel



> %global __perl_requires /usr/lib/rpm/perl.req $* | sed -e '/perl(the)/d'
> 
> It's currently impossible to install mysql on klama because of this...
> 
> 
> -- 
> Regards // Oden Eriksson, Deserve-IT.com
> 

-- 
Abel Cheung
Linux counter #256983   | http://counter.li.org
GPG Key: (0xC67186FF)   | http://deaddog.org/gpg.asc
Key fingerprint: 671C C7AE EFB5 110C D6D1  41EE 4152 E1F1 C671 86FF
--- /usr/lib/rpm/perl.req.bak   2003-05-13 23:07:19.0 +0800
+++ /usr/lib/rpm/perl.req   2003-06-04 03:26:29.0 +0800
@@ -122,9 +122,9 @@
(m/^(\s*) # we hope the inclusion starts the line
 (require|use)\s+(?!\{) # do not want 'do {' loops
 # quotes around name are always legal
-[\'\"]?([^\;\ \'\"\t]*)[\'\"]?[\t\;\ ]
+[\'\"]?([^\;\ \'\"\t]*)[\'\"]?[\t\ ]
 # the syntax for 'use' allows version requirements
-\s*([.0-9]*)
+\s*([.0-9]*)\s*\;
 /x)
) {
   my ($whitespace, $statement, $module, $version) = ($1, $2, $3,$4);


pgp0.pgp
Description: PGP signature

[Cooker] perl(the) & MySQL-client-4.0.13-1mdk

[Oden Eriksson]

Hi

I think I've found what is triggering /usr/lib/rpm/perl.req to think a 
perl(the) module is needed..., and the answer is "use the".

rpm -qp --qf "[%{requirename}\n]" MySQL-client-4.0.13-1mdk.i586.rpm | grep the
perl(the)

grep "use the" /usr/bin/mysqlaccess
use the option --old_server.
#When matching, use the first found match.


I tried this hack but it didn't work:

%global __perl_requires /usr/lib/rpm/perl.req $* | sed -e '/perl(the)/d'

It's currently impossible to install mysql on klama because of this...


-- 
Regards // Oden Eriksson, Deserve-IT.com

[Cooker] perl-base = 5.8.0 is needed by (installed) gaim-0.62-2mdk

[Robert Kulagowski]

 
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1



Installation failed:
perl-base = 5.8.0 is needed by (installed) gaim-0.62-2mdk
perl-base = 5.8.0 is needed by (installed) gaim-0.62-2mdk
[EMAIL PROTECTED] root]# urpmi gaim
Everything already installed
[EMAIL PROTECTED] root]# urpmi perl-base
To satisfy dependencies, the following packages are going to be
installed (20 MB):
perl-5.8.0-24mdk.i586
perl-base-5.8.0-24mdk.i586
perl-devel-5.8.0-24mdk.i586
Is this OK? (Y/n) y
The following packages have bad signatures:
/var/cooker/mirror.mcs.anl.gov/pub/Mandrake-devel/cooker/i586/Mandrake
/RPMS/perl-5.8.0-24mdk.i586.rpm
/var/cooker/mirror.mcs.anl.gov/pub/Mandrake-devel/cooker/i586/Mandrake
/RPMS/perl-devel-5.8.0-24mdk.i586.rpm
/var/cooker/mirror.mcs.anl.gov/pub/Mandrake-devel/cooker/i586/Mandrake
/RPMS/perl-base-5.8.0-24mdk.i586.rpm
Do you want to continue installation ? (y/N) y
installing
/var/cooker/mirror.mcs.anl.gov/pub/Mandrake-devel/cooker/i586/Mandrake
/RPMS/perl-5.8.0-24mdk.i586.rpm
/var/cooker/mirror.mcs.anl.gov/pub/Mandrake-devel/cooker/i586/Mandrake
/RPMS/perl-devel-5.8.0-24mdk.i586.rpm
/var/cooker/mirror.mcs.anl.gov/pub/Mandrake-devel/cooker/i586/Mandrake
/RPMS/perl-base-5.8.0-24mdk.i586.rpm

Installation failed:
perl-base = 5.8.0 is needed by (installed) gaim-0.62-2mdk
perl-base = 5.8.0 is needed by (installed) gaim-0.62-2mdk
[EMAIL PROTECTED] root]# rpm -qa|grep perl-base
perl-base-5.8.0-23mdk

-BEGIN PGP SIGNATURE-
Version: PGPfreeware 7.0.3 for non-commercial use 

iQA/AwUBPtygsPc1NpCTlP0JEQInwQCeNf+A1LPXGA3fOeGRSe8hQASt+SsAnjJk
ksXhQkEv4RwsbCvD6Iwlb0O1
=TxRG
-END PGP SIGNATURE-

Re: [Cooker] perl(the)

[Jason Straight]

On Saturday 31 May 2003 09:57 am, Oden Eriksson wrote:
> Installation failed:
> perl(the) is needed by MySQL-client-4.0.13-1mdk
>
> What's "perl(the)"?

Yeah, I got that too just a few mins ago.


-- 
Jason Straight
[EMAIL PROTECTED]
icq: 1796276
pgp: http://www.JeetKuneDoMaster.net/~jason/pubkey.asc

[Cooker] perl(the)

[Oden Eriksson]

Installation failed:
perl(the) is needed by MySQL-client-4.0.13-1mdk

What's "perl(the)"?

-- 
Regards // Oden Eriksson, Deserve-IT.com

[Cooker] perl-base and gaim

[Liam Quin]

Installation failed:
perl-base = 5.8.0 is needed by (installed) gnome-db-0.2.96-6mdk
perl-base = 5.8.0 is needed by (installed) gaim-0.62-2mdk
perl-base = 5.8.0 is needed by (installed) gaim-0.62-2mdk
# urpmq --sources gaim
ftp://ftp.mirror.ac.uk/sites/sunsite.uio.no/pub/unix/Linux/Mandrake/Mandrake-devel/cooker/i586/Mandrake/RPMS/gaim-0.62-2mdk.i586.rpm

Liam

-- 
Liam Quin, W3C XML Activity Lead, [EMAIL PROTECTED], http://www.w3.org/People/Quin/
http://www.holoweb.net/~liam/
Ankh's list of IRC clients: http://www.valinor.sorcery.net/clients/

[Cooker] Perl-Net-Finger needs to be rebuilt

[MEISCH,CORY (HP-Vancouver,ex1)]

Title: Message



 

[Cooker] perl-Net::IRC-0.73-1mdk.noarch may be is better change name to perl-Net-IRC-0.73-1mdk.noarch (mkcd --check errors)

[Franco Silvestro]

-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1

There is again contrib/i586/perl-Net::IRC-0.73-1mdk.noarch
if I remember time ago it was renamed...
mkcd --check errors:

mkcd: Checking the hdlists, depslist and RPMs consistency
checkDiscs: depslist /mnt/hd/Mandrake-devel/cooker/i586//Mandrake/base/depslist.ordered
checkDiscs: duplicate version in 
/mnt/hd/Mandrake-devel/cooker/i586//Mandrake/base/depslist.ordered: OK

checkDiscs: duplicate version in hdlists:ERROR checkDiscs: inconsistency in position 
between hdlist 2 rpm perl-Net and depslist.ordered
 OK

checkDiscs: in depslist, not on discs:
perl-Net::IRC-0.73-1mdk.noarch
FAILED

checkDiscs: in depslist, not in hdlists: FAILED
perl-Net::IRC-0.73-1mdk.noarch

checkDiscs: in hdlists, not on discs: FAILED
hdlist 2 rpm

checkDiscs: in hdlists, not in depslist: FAILED
perl-Net

checkDiscs: in hdlists, not see with parsehdlist: FAILED
perl-Net

checkDiscs: see with parsehdlist, not with packdrake: FAILED
perl-Net::IRC-0.73-1mdk.noarch

checkDiscs: on discs, not in hdlist: WARNING
hdlist 2 rpm perl-Net::IRC-0.73-1mdk.noarch

checkDiscs: on discs, not in depslist: WARNING
hdlist 2 cd 2 rep Mandrake/RPMS2 missing rpm perl-Net::IRC-0.73-1mdk.noarch

checkDiscs: duplicate version on discs: OK
ERROR: Checking the hdlists, depslist and RPMs consistency

- -- 
Franco Silvestro - Servizio di Sicurezza reti e dati
c/o CeSIA - Alma Mater Studiorum - Universita' di Bologna
'lynx -source http://www.reti.unibo.it/FrancoSilvestro.asc | gpg --import'
Key fingerprint = 3145 1309 C5D8 7B3F 2582  44D2 91BB ACAB E010 ABF9

Current Linux uptime: 0 hours 44 minutes.
Linux Version 2.4.21-0.13mdk, Compiled #1 Fri Mar 7 06:31:12 CET 2003
/proc/acpi/thermal_zone/THRM/temperature: 70 C
- -
Sat Mar  8 16:42:24 CET 2003
- -
Mandrake Linux Cooker-i586 20030308 0:04
One 650MHzIntelPentium III Processor, 512M RAM
-BEGIN PGP SIGNATURE-
Version: GnuPG v1.2.1 (GNU/Linux)

iD8DBQE+ahFxkbusq+AQq/kRAr/iAJ4+VWdT6bQ+RVIAzRZ08vySYVENTgCdHltZ
buiL9tmMhw+HAu6FJIBZRtk=
=JrB8
-END PGP SIGNATURE-

Re: [Cooker] perl-mysql is REQUIRED by MySQL-4.0.10-1mdk

[Guillaume Rousse]

Le Mardi 25 Février 2003 14:18, Pascal Cavy a écrit :
> it seems that perl-mysql is REQUIRED by  MySQL-4.0.10-1mdk.
Actually, only a part of perl-mysql is required by MySQL, the one 
corresponding to perl API of MySQL. The remnant is the DBD driver, which 
should be splitted in a distinct package, as already explained in this 
thread:
http://www.mail-archive.com/[EMAIL PROTECTED]/msg81531.html
-- 
If a program actually fits in memory and has enough disk space, it is 
guaranteed to crash. 
-- Murphy's Computer Laws n°5

[Cooker] perl-mysql is REQUIRED by MySQL-4.0.10-1mdk

[Pascal Cavy]

# mysql_setpermission
Password for user  to connect to MySQL:
install_driver(mysql) failed: Can't locate DBD/mysql.pm in @INC (@INC 
contains: /usr/lib/perl5/5.8.0/i386-linux-thread-multi /usr/lib/perl5/5.8.0 
/usr/lib/perl5/site_perl/5.8.0/i386-linux-thread-multi 
/usr/lib/perl5/site_perl/5.8.0 /usr/lib/perl5/site_perl 
/usr/lib/perl5/vendor_perl/5.8.0/i386-linux-thread-multi 
/usr/lib/perl5/vendor_perl/5.8.0 /usr/lib/perl5/vendor_perl .) at (eval 7) 
line 3,  line 1.
Perhaps the DBD::mysql perl module hasn't been fully installed,
or perhaps the capitalisation of 'mysql' isn't right.
Available drivers: ExampleP, Proxy.
 at /usr/bin/mysql_setpermission line 65

# urpmi perl-mysql

ftp://sunsite.uio.no//pub/linux/Mandrake/Mandrake-devel/cooker/i586/Mandrake/RPMS/perl-Mysql-1.22_19-6mdk.i586.rpm
installing /var/cache/urpmi/rpms/perl-Mysql-1.22_19-6mdk.i586.rpm

Preparing...##
   1:perl-Mysql ##
[EMAIL PROTECTED] root]# mysql_setpermission
Password for user  to connect to MySQL:
##
## Welcome to the permission setter 1.2 for MySQL.
## made by Luuk de Boer
##
What would you like to do:
  1. Set password for a user.
  2. Add a database + user privilege for that database.
 - user can do all except all admin functions
  3. Add user privilege for an existing database.
 - user can do all except all admin functions
  4. Add user privilege for an existing database.
 - user can do all except all admin functions + no create/drop
  5. Add user privilege for an existing database.
 - user can do only selects (no update/delete/insert etc.)
  0. exit this program

Make your choice [1,2,3,4,5,0]:

it seems that perl-mysql is REQUIRED by  MySQL-4.0.10-1mdk.


-- 
Pascal Cavy - VMF
__
Running  2:31,  5 users,  load average: 0.33, 0.13, 0.20
(gcc version 3.2.1 (Mandrake Linux 9.1 3.2.1-7mdk))
Kernel Linux version 2.4.21pre4-6mdkenterprise

Re: [Cooker] perl--> help me

[aacton]

Quoting Luca Olivetti <[EMAIL PROTECTED]>:

> That happens if you install modules under site_perl (the correct path 
> pre 9.0) instead of vendor_perl (starting from 9.0). I don't understand 
> much of perl, but I had to fix my cyrus-imapd package to install under 
> vendor_perl in 9.0, i.e. instead of
> 

Cool, thanks.  At least I can build my package now.
A fix would be better than a workaround though
Austin

Re: [Cooker] perl--> help me

[Pixel]

Todd Lyons <[EMAIL PROTECTED]> writes:

> When you build you "own" perl based rpm it read the site config version 
> as 5.8.00 but then writes the requires as 5.800 which breaks perl
> builds...
> [...]
> This is a bug in rpm (rpm-build to be exact). find.requires is the   
> problem, located in /usr/lib/rpm. look at line 165.

it always mean you don't use vendor_perl as should be. I use this to
cleanup perl spec file:

http://people.mandrakesoft.com/~prigaux/Spec_perl_clean.pl

Anyway, fred, can you fix find.requires?

Re: [Cooker] perl--> help me

[Luca Olivetti]

Todd Lyons wrote:


When you build you "own" perl based rpm it read the site config version 
as 5.8.00 but then writes the requires as 5.800 which breaks perl
builds...

That happens if you install modules under site_perl (the correct path 
pre 9.0) instead of vendor_perl (starting from 9.0). I don't understand 
much of perl, but I had to fix my cyrus-imapd package to install under 
vendor_perl in 9.0, i.e. instead of

perl Makefile.PL PREFIX=$(prefix)

I had to issue

perl Makefile.PL PREFIX=$(prefix) INSTALLDIRS=vendor

Don't ask me the cause of this change, I don't grok perl and don't 
follow its development.

Bye
--
Luca Olivetti
Note.- This message reached you today, it may not tomorrow if you
are using MAPS or other RBL. They arbitrarily IP addresses not
related in any way to spam, disrupting Internet connectivity.
See http://slashdot.org/article.pl?sid=01/05/21/1944247 and
http://theory.whirlycott.com/~phil/antispam/rbl-bad/rbl-bad.html


msg93226/pgp0.pgp
Description: PGP signature

Re: [Cooker] perl--> help me

[Quel Qun]

On Tue, 2003-02-18 at 15:51, Todd Lyons wrote:
> -BEGIN PGP SIGNED MESSAGE-
> Hash: SHA1
> 
> Austin Acton wrote on Tue, Feb 18, 2003 at 06:39:21PM -0500 :
> > 
> > First, it wants to install a file called perllocal.pod in
> > %perl_sitearch.  It just contains info about the package, but the name
> > seems wrong.  In SuSe, they seem to pipe .pod files to /var/adm, but
> > it's all greek to me.  Can I just delete the file?
> 
> Dunno the answer to that one.
> 
> > Also, rpm seems to add requires:perl-base >= 5.800 to the package. 
> > Since we're using perl 5.8.0, it won't install.  I grepped the source,
> > and there is no reference to '5.800' in the code.  Where is rpm getting
> > this?  Not from the spec file.
> 
> Bryan Whitehead answered this a couple days ago:
> 
> This is a bug in rpm (rpm-build to be exact). find.requires is the   
> problem, located in /usr/lib/rpm. look at line 165.
> 
> When you build you "own" perl based rpm it read the site config version 
> as 5.8.00 but then writes the requires as 5.800 which breaks perl
> builds...
> 
> Pain in the ass I've been dealing with for my perl modules I build at
> JPL.
> 
So Is there a solution? Is there anyone looking at that problem that has
annoyed many of us for long enough?
-- 
Quel Qun <[EMAIL PROTECTED]>



signature.asc
Description: This is a digitally signed message part

Re: [Cooker] perl--> help me

[Todd Lyons]

-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1

Austin Acton wrote on Tue, Feb 18, 2003 at 06:39:21PM -0500 :
> 
> First, it wants to install a file called perllocal.pod in
> %perl_sitearch.  It just contains info about the package, but the name
> seems wrong.  In SuSe, they seem to pipe .pod files to /var/adm, but
> it's all greek to me.  Can I just delete the file?

Dunno the answer to that one.

> Also, rpm seems to add requires:perl-base >= 5.800 to the package. 
> Since we're using perl 5.8.0, it won't install.  I grepped the source,
> and there is no reference to '5.800' in the code.  Where is rpm getting
> this?  Not from the spec file.

Bryan Whitehead answered this a couple days ago:

This is a bug in rpm (rpm-build to be exact). find.requires is the   
problem, located in /usr/lib/rpm. look at line 165.

When you build you "own" perl based rpm it read the site config version 
as 5.8.00 but then writes the requires as 5.800 which breaks perl
builds...

Pain in the ass I've been dealing with for my perl modules I build at
JPL.

Blue skies...   Todd
- -- 
  Todd Lyons -- MandrakeSoft, Inc.   http://www.mandrakesoft.com/
UNIX was not designed to stop you from doing stupid things, because 
  that would also stop you from doing clever things. -- Doug Gwyn
  Mandrake Cooker Devel Version, Kernel 2.4.21pre4-5mdk
-BEGIN PGP SIGNATURE-
Version: GnuPG v1.2.1 (GNU/Linux)

iD8DBQE+Usb6lp7v05cW2woRAqt0AJsGvHBBjygb2UiVwMrbiTeyfQaUYQCeM1yt
Wh6SzTdeqlGVXrLzITk79dw=
=ckXn
-END PGP SIGNATURE-

[Cooker] perl--> help me

[Austin Acton]

Any Perl experts...

I've got problems building a package that comes with perl bindings.

First, it wants to install a file called perllocal.pod in
%perl_sitearch.  It just contains info about the package, but the name
seems wrong.  In SuSe, they seem to pipe .pod files to /var/adm, but
it's all greek to me.  Can I just delete the file?

Also, rpm seems to add requires:perl-base >= 5.800 to the package. 
Since we're using perl 5.8.0, it won't install.  I grepped the source,
and there is no reference to '5.800' in the code.  Where is rpm getting
this?  Not from the spec file.

Any suggestions are appreciated.

Austin

-- 
Austin Acton Hon.B.Sc.
 Synthetic Organic Chemist, Teaching Assistant
   Department of Chemistry, York University, Toronto
 MandrakeClub Volunteer (www.mandrakeclub.com)
 homepage: www.groundstate.ca

=head2 Tue Feb 18 18:36:26 2003: C L

=over 4

=item *

C

=item *

C

=item *

C

=item *

C

=back

Re: [Cooker] Perl module build on klama

[Lenny Cartier]

Hello

On Tue, Feb 04, 2003 at 01:33:18PM +0100, Per Øyvind Karlsen wrote:
> hmm, I ran into that one here the other day too, sure, I'm not helping much now, but 
>at least you won't feel alone;)

> > I just try to build a perl-module on klama, but I can't install perl-POE:
> > Requires perl-base >= 5.800

I think it will be fixed with the package I've just uploaded.

lenny

Re: [Cooker] Perl module build on klama

[Per Øyvind Karlsen]

hmm, I ran into that one here the other day too, sure, I'm not helping much now, but 
at least you won't feel alone;)
- Original Message - 
From: "Olivier Thauvin" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Cc: <[EMAIL PROTECTED]>
Sent: Tuesday, February 04, 2003 1:06 PM
Subject: [Cooker] Perl module build on klama


> I just try to build a perl-module on klama, but I can't install perl-POE:
> Requires perl-base >= 5.800
> 
> I don't see in spec this dependency, else a require on perl-base without 
> version.
> 
> After rebuilding for test I see:
> [nanardon@klama SPECS]$ rpm -qp --queryformat "[%{REQUIRENAME} 
> %{REQUIREVERSION}\n]" 
> /home/nanardon/rpm/RPMS/noarch/perl-POE-0.23-3mdk.noarch.rpm
> perl
> perl-base
> perl-Filter 1.28
> rpmlib(PayloadFilesHavePrefix) 4.0-1
> rpmlib(CompressedFileNames) 3.0.4-1
> perl-base 5.800
> 
> Where does come from the latest requires on perl-base 5.800 ?
> 
> In spec:
> Requires:   perl, perl-base, perl-Filter >= 1.28
> BuildRequires:  perl-devel
> 
> -- 
> Linux pour Mac !? Enfin le moyen de transformer
> une pomme en véritable ordinateur. - JL.
> Olivier Thauvin - http://nanardon.homelinux.org/
>

[Cooker] Perl module build on klama

[Olivier Thauvin]

I just try to build a perl-module on klama, but I can't install perl-POE:
Requires perl-base >= 5.800

I don't see in spec this dependency, else a require on perl-base without 
version.

After rebuilding for test I see:
[nanardon@klama SPECS]$ rpm -qp --queryformat "[%{REQUIRENAME} 
%{REQUIREVERSION}\n]" 
/home/nanardon/rpm/RPMS/noarch/perl-POE-0.23-3mdk.noarch.rpm
perl
perl-base
perl-Filter 1.28
rpmlib(PayloadFilesHavePrefix) 4.0-1
rpmlib(CompressedFileNames) 3.0.4-1
perl-base 5.800

Where does come from the latest requires on perl-base 5.800 ?

In spec:
Requires:   perl, perl-base, perl-Filter >= 1.28
BuildRequires:  perl-devel

-- 
Linux pour Mac !? Enfin le moyen de transformer
une pomme en véritable ordinateur. - JL.
Olivier Thauvin - http://nanardon.homelinux.org/

[Cooker] perl-Net::IRC-0.73-1mdk seems broke gendistrib and mkcd --check behaviour

[Franco Silvestro]

-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1

this name:
perl-Net::IRC-0.73-1mdk
seems broke gendistrib and mkcd --check behaviour.
why not :
perl-Net-IRC-0.73-1mdk
??
cu...;o)
- -- 
Franco Silvestro
c/o CeSIA - Alma Mater Studiorum - Universita' di Bologna
'lynx -source http://www.reti.unibo.it/FrancoSilvestro.asc | gpg --import'
Key fingerprint = 3145 1309 C5D8 7B3F 2582  44D2 91BB ACAB E010 ABF9

Current Linux uptime: 2 hours 29 minutes.
Linux Version 2.4.21pre4-1mdk, Compiled #1 Wed Jan 29 20:02:53 CET 2003
/proc/acpi/thermal_zone/THRM/temperature: 54 C
- -
Mon Feb  3 11:00:35 CET 2003
- -
Mandrake Linux Cooker-i586 20030203 10:32
One 650MHzIntelPentium III Processor, 512M RAM
-BEGIN PGP SIGNATURE-
Version: GnuPG v1.2.1 (GNU/Linux)

iD8DBQE+Pj7skbusq+AQq/kRAiP5AKCo7iqlZ8itV9FXrDDoERN75b29WwCeKyG9
mXF/YHGLLLJ70rNkxzb8wao=
=KbEn
-END PGP SIGNATURE-

[Cooker] perl-POE patch

[Todd Lyons]

The attached fixes the following errors during build of perl-POE

Checking for unpackaged file(s): /usr/lib/rpm/check-files
/home/todd/RPM/tmp/perl-POE-buildroot
error: Installed (but unpackaged) file(s) found:
   /usr/lib/perl5/site_perl/5.8.0/POE/Component/Client/TCP.pm
   /usr/lib/perl5/site_perl/5.8.0/POE/Component/Server/TCP.pm
   /usr/lib/perl5/site_perl/5.8.0/i386-linux-thread-multi/perllocal.pod


RPM build errors:
Installed (but unpackaged) file(s) found:
   /usr/lib/perl5/site_perl/5.8.0/POE/Component/Client/TCP.pm
   /usr/lib/perl5/site_perl/5.8.0/POE/Component/Server/TCP.pm
   /usr/lib/perl5/site_perl/5.8.0/i386-linux-thread-multi/perllocal.pod

Blue skies...   Todd
-- 
Never take no as an answer from someone who's not authorized to say yes.
--Ben Reser on Cooker ML
   Cooker Version mandrake-release-9.1-0.1mdk Kernel 2.4.20-1mdk

--- perl-POE.spec.orig  2002-10-03 05:57:52.0 -0700
+++ perl-POE.spec   2002-12-10 19:23:21.0 -0800
@@ -52,6 +52,8 @@
 %dir %{_libdir}/perl5/site_perl/*/POE/Pipe
 %dir %{_libdir}/perl5/site_perl/*/POE/Wheel
 %{_libdir}/perl5/site_perl/*/POE/*/*.pm
+%{_libdir}/perl5/site_perl/*/POE/*/*/*.pm
+%{_libdir}/perl5/site_perl/*/i386-linux-thread-multi/*
 %dir %{_libdir}/perl5/site_perl/*/POE/Component/Server
 %dir %{_libdir}/perl5/site_perl/*/POE/Component/Client
 %{_mandir}/man3pm/*



msg83576/pgp0.pgp
Description: PGP signature

[Cooker] perl-ldap missing dependency?

[Steve Fox]

I believe that perl-ldap is missing a dependency on perl-Convert-ASN1.

[drfickle@tp st-perl]$ perl -e 'use Net::LDAP;'
Can't locate Convert/ASN1.pm in @INC (@INC contains:
/usr/lib/perl5/5.8.0/i386-linux-thread-multi /usr/lib/perl5/5.8.0
/usr/lib/perl5/site_perl/5.8.0/i386-linux-thread-multi
/usr/lib/perl5/site_perl/5.8.0 /usr/lib/perl5/site_perl
/usr/lib/perl5/vendor_perl/5.8.0/i386-linux-thread-multi
/usr/lib/perl5/vendor_perl/5.8.0 /usr/lib/perl5/vendor_perl .) at
/usr/lib/perl5/vendor_perl/5.8.0/Net/LDAP.pm line 11.

This is an issue for Cooker, 9.0, and 8.2 at least.

Thanks.

-- 

Steve Fox
http://k-lug.org

[Cooker] perl module updates?

[Lonnie Borntreger]

What is the schedule to update the perl modules, and to add new ones? 
Specifically:
XML::Twig >= 3.09 (currently at 3.05)
Tk::TableMatrix (non-existent)
Term::ProgressBar (non-existent)

Or should I just install/update them on my own?

TTFN, 
Lonnie Borntreger

Re: [Cooker] perl dependencies

[Pixel]

"Michal 'hramrach' Suchanek" <[EMAIL PROTECTED]> writes:

> There was some change in packaging perl
> (I think the -4mdk was before change, I have -14mdk, no logs as
> urpmi was broken by the change), and this is not recorded in
> dependencies of packages that use libperl or perl modules (perl-URPM, 
> httpd-perl, vim, etc). The change is incompatible in both ways.
> 
> Upgrading httpd-perl and urpmi made them unusable, after perl upgrade
> vim was unusable. Upgrading everything at once should be fine.

i changed in cooker from 5.8 no thread to 5.8 multi-thread without
adding all the needed dependencies. upgrading from 8.2 to 9.0 or to
cooker should be no pb.

[Cooker] perl dependencies

[Michal 'hramrach' Suchanek]

There was some change in packaging perl
(I think the -4mdk was before change, I have -14mdk, no logs as
urpmi was broken by the change), and this is not recorded in
dependencies of packages that use libperl or perl modules (perl-URPM, 
httpd-perl, vim, etc). The change is incompatible in both ways.

Upgrading httpd-perl and urpmi made them unusable, after perl upgrade
vim was unusable. Upgrading everything at once should be fine.
-- 
Michal Suchanek
[EMAIL PROTECTED]

Re: [Cooker] Perl 5.8.0

[Kim Schulz]

On Sun, 3 Nov 2002 19:26:49 +0100
Oden Eriksson <[EMAIL PROTECTED]> wrote:
> söndagen den 3 november 2002 19.04 skrev Kim Schulz:
> > hi
> > Is there a perl 5.8.0 package availble for MDK9.0/cooker?
> 
> huh?
> 
> it's in there... did you mean 5.6.1?

oh sorry! I was testing the version on the wrong terminal which was a
remote box.  


-- 
Kim Schulz - Freelance Development | Etiquette is for those with no
Email  : kim @ schulz.dk   | breeding; fashion for those with
Tlf: 51904262  | no taste. 

Re: [Cooker] Perl 5.8.0

[Oden Eriksson]

söndagen den 3 november 2002 19.04 skrev Kim Schulz:
> hi
> Is there a perl 5.8.0 package availble for MDK9.0/cooker?

huh?

it's in there... did you mean 5.6.1?

-- 
Regards // Oden Eriksson - Deserve-IT Networks http://d-srv.com

Check the "Modules For Apache2" status page at: 
http://d-srv.com/modules_for_apache2.html

[Cooker] Perl 5.8.0

[Kim Schulz]

hi
Is there a perl 5.8.0 package availble for MDK9.0/cooker?


-- 
Kim Schulz - Freelance Development | Sometimes even to live is an act
Email  : kim @ schulz.dk   | of courage.   -- Seneca 
Tlf: 51904262  | 

[Cooker] perl-XML-LibXML 1.53 is out

[Guillaume Rousse]

Please upgrade cooker package, thanks.
-- 
When you finally buy enough memory, you will not have enough disk space. 
-- Murphy's Computer Laws n°3

[Cooker] perl-HTML-Template-Expr-0.04 Uploaded

[Peter Chen]

FYI, I have uploaded perl-HTML-Template-Expr-0.04.

HTML-Template-Expr provides an extension to HTML::Template which allows
expressions in the template syntax.  This is purely an addition - all
the normal HTML::Template options, syntax and behaviors will still work.

Pete <[EMAIL PROTECTED]>

[Cooker] perl-HTML-Template-2.6 and perl-CGI-Application-2.6 uploaded

[Peter Chen]

FYI, I have uploaded perl-HTML-Template-2.6 and
perl-CGI-Application-2.6.


HTML-Template attempts make using HTML templates simple and natural.  It
extends standard HTML with a few new HTML-esque tags - ,
, ,  and .  The file
written with HTML and these new tags is called a template.  It is
usually saved separate from your script - possibly even created by
someone else!  Using this module you fill in the values for the
variables, loops and branches declared in the template.  This allows
you to separate design - the HTML - from the data, which you generate
in the Perl script.


CGI-Application is intended to make it easier to create sophisticated,
reusable web-based applications. This module implements a methodology
which, if followed, will make your web software easier to design,
easier to document, easier to write, and easier to evolve.


Pete <[EMAIL PROTECTED]>

Re: [Cooker] perl-AppConfig-1.52-3mdk

[Pixel]

"Quel Qun" <[EMAIL PROTECTED]> writes:

[...]

> >> > > Require in spec is listed as perl-base>=5.800
> >> > > It should be perl-base >=5.8.0
> >> > 
> >> > Actually it should be perl-base >= 2:5.8.0
> >> > Otherwise the Requires will let it install on older 5.6
> versions that
> >> > used 5.600 as the version.
> >> > 
> >> This does not work either. I am also trying to build and
> install a perl
> >> module, but an automatic dependency of perl-base >= 5.800 is
> always
> >> added automatically.
> >
> >rpm is doing this. Upgrade rpm
> >
> 
> Well, do you mean when a new version is available? I currently
> use the cooker version: rpm-4.0.4-19mdk.

on the box used to build the package?? mdk 8.2's "rpm-build" package
had a special rule to add an automatic dependency perl-base >= 5.601.
With new perl, it adds perl-base >= 5.800 which is no good. It is
find-requires which does this. This was changed in rpm-build
4.0.4-12mdk

[Cooker] perl-bignum-0.13, perl-Math-BigRat-0.09, and perl-Math-BigInt-1.63uploaded

[Peter Chen]

FYI, I have uploaded perl-bignum-0.13, perl-Math-BigRat-0.09, and
perl-Math-BigInt-1.63:

perl-bignum-0.13
bignum attempts to make it easier to write scripts that use
BigInts/BigFloats in a transparent way. They use the rewritten
versiosn of Math::BigInt and Math::BigFloat, Math::BigRat (for bigrat)
and optionally Math::BigInt::Lite.

perl-Math-BigRat-0.09
Math-BigRat is an arbitrary size rational math package.

perl-Math-BigInt-1.63
Math-BigInt is an arbitrary size integer math package.

Pete

[Cooker] perl-POE-0.23 uploaded

[Peter Chen]

FYI, I have uploaded perl-POE-0.23.  This is an update from 0.22.

POE module for perl.  POE is a mature framework for creating
multitasking programs in Perl.  It has been in active development
since 1998.  It has been used in mission-critical systems such as
internetworked financial markets, file systems, commerce and
application servers.

Pete <[EMAIL PROTECTED]>

Re: [Cooker] perl rpm from cvs?

[Buchan Milne]

Oden Eriksson wrote:
> On onsdagen den 25 september 2002 12.07 Buchan Milne wrote:

>>Which problem? AFAIK, all of them are solveable ...
> 
> 
> Ok thanks, yes I just realized that.
> 
> Would you mind sharing your woodoo magic?
> 

It's not really woodoo (voodoo?) magic, a bit of bash with a few weird 
rpm queries, and it doesn't totally work, but you can find my current 
version here:

http://ranger.dnsalias.com/mandrake/scripts/build_from_cvs

Actually, it's so small, I have atteched it (but more current one may 
always be on my site).

It still needs a few features to make it really useful:
1)Specify version (for orignal source)
2)Specify release tag for samba cvs
3)Specify release tag for original source
4)Be able to both source and packaging for release tags
5)GUI


Only problem is, I am having trouble extracting the name of the source 
tarball that we need to check for / create from CVS (but it works right 
if you have a tarball in your `rpm --eval %_sourcedir`):


[bgmilne@bgmilne bgmilne]$ rpm -q --specfile 
/home/bgmilne/downloads/source/cvs/mandrake/SPECS/samba/samba.spec --qf 
"%{SOURCE}\n"|head -n1
(none)

Why does this not work??

[bgmilne@bgmilne bgmilne]$ rpm -q --specfile 
/home/bgmilne/downloads/source/cvs/mandrake/SPECS/samba/samba.spec --qf 
"%{NAME}\n"|head -n1
samba
[bgmilne@bgmilne bgmilne]$ rpm -q --specfile 
/home/bgmilne/downloads/source/cvs/mandrake/SPECS/samba/samba.spec --qf 
"%{VERSION}\n"|head -n1
2.2.6
[bgmilne@bgmilne bgmilne]$ rpm -q --specfile 
/home/bgmilne/downloads/source/cvs/mandrake/SPECS/samba/samba.spec --qf 
"%{RELEASE}\n"|head -n1
1.0.pre2.2mdk

Only problem here, is that I actually need samba-2.2.6pre2.tar.bz2, 
which I have no way of constructing from the variables/macros that do 
work. For a stable release, it should (normally, unless they have a 
weird naming convention, which some people do) work:

[bgmilne@bgmilne bgmilne]$ rpm -q --specfile 
/home/bgmilne/downloads/source/cvs/mandrake/SPECS/samba/samba.spec --qf 
"%{NAME}-%{VERSION}\n"|head -n1
samba-2.2.6

Buchan

-- 
|Registered Linux User #182071-|
Buchan MilneMechanical Engineer, Network Manager
Cellphone * Work+27 82 472 2231 * +27 21 8828820x121
Stellenbosch Automotive Engineering http://www.cae.co.za
GPG Key   http://ranger.dnsalias.com/bgmilne.asc
1024D/60D204A7 2919 E232 5610 A038 87B1 72D6 AC92 BA50 60D2 04A7



build_from_cvs
Description: application/java-vm

Re: [Cooker] perl rpm from cvs?

[Oden Eriksson]

On onsdagen den 25 september 2002 12.07 Buchan Milne wrote:
> Oden Eriksson wrote:
> > On onsdagen den 25 september 2002 11.13 Buchan Milne wrote:
> >>IMHO, something like this would totally waste the Gentoo crowd (who keep
> >>saying how good it is to build from source).
> >
> > Oh, shit! I see the problem.
>
> Which problem? AFAIK, all of them are solveable ...

Ok thanks, yes I just realized that.

Would you mind sharing your woodoo magic?

-- 
Regards // Oden Eriksson
Deserve-IT Networks -> http://d-srv.com

Re: [Cooker] perl rpm from cvs?

[Buchan Milne]

Oden Eriksson wrote:
> On onsdagen den 25 september 2002 11.13 Buchan Milne wrote:

>>IMHO, something like this would totally waste the Gentoo crowd (who keep
>>saying how good it is to build from source).
> 
> 
> Oh, shit! I see the problem. 

Which problem? AFAIK, all of them are solveable ...

> Hmm..., what is the point of using CVS in this 
> case then when you cannot use it fully? Is it only for viewing spec file 
> diffs or what?

No, I think if you can get the original source tarball, then in most 
cases (ie the package maintainter ensured everything besides sources 
went into cvs), it should be possible by:

$ cvs co  -r 
$ build_from_cvs 

(where build_from_cvs is my bash script that put all the stuff in cvs in 
the right place in the right form, ie bzip2'ed or not, and then runs rpm 
-ba .spec).

Buchan

-- 
|Registered Linux User #182071-|
Buchan MilneMechanical Engineer, Network Manager
Cellphone * Work+27 82 472 2231 * +27 21 8828820x121
Stellenbosch Automotive Engineering http://www.cae.co.za
GPG Key   http://ranger.dnsalias.com/bgmilne.asc
1024D/60D204A7 2919 E232 5610 A038 87B1 72D6 AC92 BA50 60D2 04A7

Re: [Cooker] perl rpm from cvs?

[Oden Eriksson]

On onsdagen den 25 september 2002 11.13 Buchan Milne wrote:
> Oden Eriksson wrote:
> > On tisdagen den 24 september 2002 23.37 Guillaume Rousse wrote:
> >>Le Mardi 24 Septembre 2002 23:30, Oden Eriksson a écrit :
> >>>Hi.
> >>>
> >>>How do I get perl-5.601-14mdk.src.rpm from CVS?
> >>
> >>rpm itself, no way, but spec file and patches are available here:
> >>http://cvs.mandrakesoft.com/cgi-bin/cvsweb.cgi/SPECS/perl/
> >
> > I think I meant if some guru had made a script allready that could do
> > this, fetch the files from CVS and then make the src.rpm?

(i was pretty "just-woke-up" when i wrote this, i should at least have my 
morning coffey before i speak;))

> IMHO, someone should make a perl GUI for this, where you can browse the
> CVS, and choose to build an RPM from it.
>
> It would of course require:
> 1)*ALL* patches be in CVS. I have tried building kernel RPMS from CVS,
> but some of the patches in CVS don't match the patches in the SRPM.
>
> 2)All sources be 'find-able'. For example, some of the mozilla sources
> (i18n stuff) is hard to find.
>
> But, in the case where the source URL is not complete, it would be
> feasible to lookup the package on Freshmeat (they have an xml-ized
> service available, where one can get the source location:
>
> http://freshmeat.net/projects-xml/samba/samba.xml
> (but this record is old, 2.0.10!).
>
> I have a script that does the real basics of this, just bzip2'ing all
> the patches, copying them to your `rpm --eval %_sourcedir`, and then
> running rpm -ba. It is also appropriate for building from a cvs snapshot
> of the original source, but doesn't help in locating old source (unless
> I can hack it to get an older release from the source cvs). I still need
> to fix it so it will check the package out  of CVS, but it would
> probably be better to rewrite it in perl, with a GUI. There is a
> slightly different and slightly improved version of the script in samba
> cvs (under package/Mandrake).
>
> IMHO, something like this would totally waste the Gentoo crowd (who keep
> saying how good it is to build from source).

Oh, shit! I see the problem. Hmm..., what is the point of using CVS in this 
case then when you cannot use it fully? Is it only for viewing spec file 
diffs or what?

-- 
Regards // Oden Eriksson
Deserve-IT Networks -> http://d-srv.com

Re: [Cooker] perl rpm from cvs?

[Buchan Milne]

Oden Eriksson wrote:
> On tisdagen den 24 september 2002 23.37 Guillaume Rousse wrote:
> 
>>Le Mardi 24 Septembre 2002 23:30, Oden Eriksson a écrit :
>>
>>>Hi.
>>>
>>>How do I get perl-5.601-14mdk.src.rpm from CVS?
>>
>>rpm itself, no way, but spec file and patches are available here:
>>http://cvs.mandrakesoft.com/cgi-bin/cvsweb.cgi/SPECS/perl/
> 
> 
> I think I meant if some guru had made a script allready that could do this, 
> fetch the files from CVS and then make the src.rpm?
> 

IMHO, someone should make a perl GUI for this, where you can browse the 
CVS, and choose to build an RPM from it.

It would of course require:
1)*ALL* patches be in CVS. I have tried building kernel RPMS from CVS, 
but some of the patches in CVS don't match the patches in the SRPM.

2)All sources be 'find-able'. For example, some of the mozilla sources 
(i18n stuff) is hard to find.

But, in the case where the source URL is not complete, it would be 
feasible to lookup the package on Freshmeat (they have an xml-ized 
service available, where one can get the source location:

http://freshmeat.net/projects-xml/samba/samba.xml
(but this record is old, 2.0.10!).

I have a script that does the real basics of this, just bzip2'ing all 
the patches, copying them to your `rpm --eval %_sourcedir`, and then 
running rpm -ba. It is also appropriate for building from a cvs snapshot 
of the original source, but doesn't help in locating old source (unless 
I can hack it to get an older release from the source cvs). I still need 
to fix it so it will check the package out  of CVS, but it would 
probably be better to rewrite it in perl, with a GUI. There is a 
slightly different and slightly improved version of the script in samba 
cvs (under package/Mandrake).

IMHO, something like this would totally waste the Gentoo crowd (who keep 
saying how good it is to build from source).

-- 
|Registered Linux User #182071-|
Buchan MilneMechanical Engineer, Network Manager
Cellphone * Work+27 82 472 2231 * +27 21 8828820x121
Stellenbosch Automotive Engineering http://www.cae.co.za
GPG Key   http://ranger.dnsalias.com/bgmilne.asc
1024D/60D204A7 2919 E232 5610 A038 87B1 72D6 AC92 BA50 60D2 04A7

Re: [Cooker] perl rpm from cvs?

[Oden Eriksson]

On tisdagen den 24 september 2002 23.37 Guillaume Rousse wrote:
> Le Mardi 24 Septembre 2002 23:30, Oden Eriksson a écrit :
> > Hi.
> >
> > How do I get perl-5.601-14mdk.src.rpm from CVS?
>
> rpm itself, no way, but spec file and patches are available here:
> http://cvs.mandrakesoft.com/cgi-bin/cvsweb.cgi/SPECS/perl/

I think I meant if some guru had made a script allready that could do this, 
fetch the files from CVS and then make the src.rpm?

-- 
Regards // Oden Eriksson
Deserve-IT Networks -> http://d-srv.com

Re: [Cooker] perl rpm from cvs?

[Guillaume Rousse]

Le Mardi 24 Septembre 2002 23:30, Oden Eriksson a écrit :
> Hi.
>
> How do I get perl-5.601-14mdk.src.rpm from CVS?
rpm itself, no way, but spec file and patches are available here:
http://cvs.mandrakesoft.com/cgi-bin/cvsweb.cgi/SPECS/perl/
-- 
Guillaume Rousse <[EMAIL PROTECTED]>
GPG key http://lis.snv.jussieu.fr/~rousse/gpgkey.html

[Cooker] perl rpm from cvs?

[Oden Eriksson]

Hi.

How do I get perl-5.601-14mdk.src.rpm from CVS?

-- 
Regards // Oden Eriksson
Deserve-IT Networks -> http://d-srv.com

Re: [Cooker] perl-Net_SSLeay

[Sebastian Dransfeld]

On Mon, 2002-09-23 at 16:28, François Pons wrote:
> [EMAIL PROTECTED] (François Pons) writes:
> 
> > Sebastian Dransfeld <[EMAIL PROTECTED]> writes:
> > 
> > > This seems like a bad idea (from .spec):
> > > 
> > > find $RPM_BUILD_ROOT/%{prefix} -name "*.al" | xargs rm -f
> > > 
> > > Running the examples demand that the .al files are there!
> > 
> > This is more problably a problem loading method which sounds like a problem of
> > missing module.
> > 
> > I take a look on this.
> 
> There seems to be strange vision of this, this package looks like to have
> problems.
> 
> It is problably used only by other module and not directly.
> 
> I invistigate more on the topic, but it seems to be unable to work without
> modifications (at least from some examples files).

If I remove the line with "rm" from the spec the package and examples
work.

Sebastian

Re: [Cooker] perl-Net_SSLeay

[François Pons]

[EMAIL PROTECTED] (François Pons) writes:

> Sebastian Dransfeld <[EMAIL PROTECTED]> writes:
> 
> > This seems like a bad idea (from .spec):
> > 
> > find $RPM_BUILD_ROOT/%{prefix} -name "*.al" | xargs rm -f
> > 
> > Running the examples demand that the .al files are there!
> 
> This is more problably a problem loading method which sounds like a problem of
> missing module.
> 
> I take a look on this.

There seems to be strange vision of this, this package looks like to have
problems.

It is problably used only by other module and not directly.

I invistigate more on the topic, but it seems to be unable to work without
modifications (at least from some examples files).

François.

Re: [Cooker] perl-Net_SSLeay

[François Pons]

Sebastian Dransfeld <[EMAIL PROTECTED]> writes:

> This seems like a bad idea (from .spec):
> 
> find $RPM_BUILD_ROOT/%{prefix} -name "*.al" | xargs rm -f
> 
> Running the examples demand that the .al files are there!

This is more problably a problem loading method which sounds like a problem of
missing module.

I take a look on this.

François.

[Cooker] perl-Net_SSLeay

[Sebastian Dransfeld]

This seems like a bad idea (from .spec):

find $RPM_BUILD_ROOT/%{prefix} -name "*.al" | xargs rm -f

Running the examples demand that the .al files are there!

Sebastian

[Cooker] perl-XML-Twig problems

[David Walser]

Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.56074
+ umask 022
+ cd /usr/src/RPM/BUILD
+ cd XML-Twig-3.05
+ rm -rf /var/tmp/perl-XML-Twig-buildroot
+ make PREFIX=/var/tmp/perl-XML-Twig-buildroot/usr
install
make: *** No rule to make target
`pure_vendor_install', needed by `pure_install'.

building on an 8.x machine (someone else is doing
this, passing this along).  If anybody knows what's
up, lemme know.

__
Do You Yahoo!?
Yahoo! Finance - Get real-time stock quotes
http://finance.yahoo.com

Re: [Cooker] perl-Digest-Nilsimsa

[Ben Reser]

On Thu, Sep 05, 2002 at 10:22:02AM +0200, Tibor Pittich wrote:
> On 30. aug 2002  21:00, Ben Reser wrote:
> 
> > Needs to be rebuit for multithreaded perl...
> > razor in cooker is broken because of this...
> 
> hm, i have installed perl-Digest-Nilsimsa-0.06-3mdk and razor works
> great for me..

That's because 3mdk fixed my report:
http://www.mandrake.com/en/archives/changelog/2002-09/msg00012.php

Note the date of the email and the date of the build of 3mdk.

Looks like the list is sending old emails.  Or you're just really behind
in replying.

-- 
Ben Reser <[EMAIL PROTECTED]>
http://ben.reser.org

Never take no as an answer from someone who isn't authorized to say yes.

Re: [Cooker] perl-Digest-Nilsimsa

[Tibor Pittich]

On 30. aug 2002  21:00, Ben Reser wrote:

> Needs to be rebuit for multithreaded perl...
> razor in cooker is broken because of this...

hm, i have installed perl-Digest-Nilsimsa-0.06-3mdk and razor works
great for me..


-- 
Linux 2.4.19-3mdk 
Mandrake Linux release 9.0 (Cooker) for i586 
10:12am up 19 days, 16:24, 7 users, load average: 0.20, 0.08, 0.02 



msg73746/pgp0.pgp
Description: PGP signature

[Cooker] perl-Digest-Nilsimsa

[Ben Reser]

Needs to be rebuit for multithreaded perl...
razor in cooker is broken because of this...

-- 
Ben Reser <[EMAIL PROTECTED]>
http://ben.reser.org

If your love has no hope of being welcomed do not voice it; for if it 
be silent it can endure, a guarded flame, within you.
- The Wisdom of the Sands

[Cooker] Perl related problem in INND

[Jerome Whelan]

SUMMARY: Perl related problem in INND

INND cannot be started as installed because a shared library cannot be
located.

I have observed this problem in
upgrade 8.1 to 9.0b2 ,
fresh install on  9.0b4 ,
fresh install on 9.0RC1 .

Here is the command line dialog in which I start innd and then check its
status:

[root@jerryAthlon root]# /etc/rc.d/init.d/innd start
Starting INND system:   [  OK  ]

[root@jerryAthlon root]# /etc/rc.d/init.d/innd status
innd dead but subsys locked
[root@jerryAthlon root]#

I looked in the /var/log/syslog and found the following lines related to the
innd start:

Sep  3 16:27:01 athlon rc.news: Starting innd.
Sep  3 16:27:01 athlon inndstart: Reading config from /etc/news/inn.conf
Sep  3 16:27:01 athlon rc.news: /usr/bin/innd: error while loading shared
libraries: libperl.so: cannot open shared object file: No such file or
directory
Sep  3 16:27:01 athlon sh: rc.news startup succeeded

I figured that I could update the list of library file locations, this
problem might be solved so I did the following:

[root@jerryAthlon etc]# locate libperl.so
/usr/lib/perl5/5.8.0/i386-linux-thread-multi/CORE/libperl.so

So, I added this path to the end of the /etc/ld.so.conf file and executed
the command:

/sbin/ldconfig -v

Now when I try to start INND the results are different, the library is
located, but the system still is unusable. Here are the related lines from
the /var/log/syslog file:

Sep  3 16:48:34 athlon rc.news: Starting innd.
Sep  3 16:48:34 athlon inndstart: Reading config from /etc/news/inn.conf
Sep  3 16:48:34 athlon rc.news: /usr/bin/innd: relocation error:
/usr/bin/innd: undefined symbol: PL_markstack_ptr
Sep  3 16:48:34 athlon sh: rc.news startup succeeded

but the innd system is still not working, as seen below:

[root@jerryAthlon etc]# /etc/rc.d/init.d/innd status
innd dead but subsys locked



Has anyone else seen this problem, or a related issue?  Any suggestions ?
Did I do the right thing when the initial "libperl.so not found" error
occurred?
Jerry Whelan

Re: [Cooker] perl-URPM require problem

[Pixel]

Pascal <[EMAIL PROTECTED]> writes:

> I have a system with:
> perl-5.8.0-1mdk
> 
> 
> I could install without error :
> urpmi-4.0-3mdk
> perl-URPM-0.70-1mdk
> 
> BUT urpmi using perl-URPM now complains with :
> Can't locate URPM.pm in @INC (@INC contains: /usr/lib/perl5/5.8.0/i386-linux 
> /usr/lib/perl5/5.8.0 /usr/lib/perl5/site_perl/5.8.0/i386-linux 

won't fix. cf archive

[Cooker] perl-URPM require problem

[Pascal]

I have a system with:
perl-5.8.0-1mdk


I could install without error :
urpmi-4.0-3mdk
perl-URPM-0.70-1mdk

BUT urpmi using perl-URPM now complains with :
Can't locate URPM.pm in @INC (@INC contains: /usr/lib/perl5/5.8.0/i386-linux 
/usr/lib/perl5/5.8.0 /usr/lib/perl5/site_perl/5.8.0/i386-linux 
/usr/lib/perl5/site_perl/5.8.0 /usr/lib/perl5/site_perl/5.6.1 
/usr/lib/perl5/site_perl /usr/lib/perl5/vendor_perl/5.8.0/i386-linux 
/usr/lib/perl5/vendor_perl/5.8.0 /usr/lib/perl5/vendor_perl .) at 
/usr/lib/perl5/vendor_perl/5.8.0/urpm.pm line 96.
BEGIN failed--compilation aborted at /usr/lib/perl5/vendor_perl/5.8.0/urpm.pm 
line 96.
Compilation failed in require at /usr/sbin/urpmi line 20.
BEGIN failed--compilation aborted at /usr/sbin/urpmi line 20.

because the files it wants is in:
/usr/lib/perl5/vendor_perl/5.8.0/i386-linux-thread-multi/URPM.pm


In fact: perl-URPM requires a level of perl > 5.8.0-1mdk (i dont know at what 
level was introduced 
/usr/lib/perl5/vendor_perl/5.8.0/i386-linux-thread-multi/ directory)

Pascal

Re: [Cooker] perl-install/network/tools.pm / about new cooker kernel

[Florent BERANGER]

up !

Le Lundi 19 Août 2002 14:07, Florent BERANGER a écrit :
> Modem connection isn't immediate -> "internet connection
> failed, please..." message but graph and connection time
> starts all the time.
>
> -> incoherence -> must retry to find www.mandrakedoft 10s
> later and don't start connection graphs and time until the
> flag isn't at 1 !
>
> Thanks to take a look at it,
>   Florent
>
> PS : There is 2 functions : connected and connected2. Why
> 2 functions ?



Le Lundi 19 Août 2002 14:16, Florent BERANGER a écrit :
> Are ov511_decomp, ov518_decomp & DC10 modules in new
> cooker kernel ?
>
> Thanks
--
EXCEPTIONNEL!
Tiscali lance les forfaits Internet Illimités,
à partir de 15,95EUR / mois.
Pour en profiter,cliquez ici: http://register.tiscali.fr/forfaits/
Offres soumises à conditions.

Re: [Cooker] perl-install/network/tools.pm / about new cooker kernel

[Florent BERANGER]

up !

Le Lundi 19 Août 2002 14:07, Florent BERANGER a écrit :
> Modem connection isn't immediate -> "internet connection
> failed, please..." message but graph and connection time
> starts all the time.
>
> -> incoherence -> must retry to find www.mandrakedoft 10s
> later and don't start connection graphs and time until the
> flag isn't at 1 !
>
> Thanks to take a look at it,
>   Florent
>
> PS : There is 2 functions : connected and connected2. Why
> 2 functions ?



Le Lundi 19 Août 2002 14:16, Florent BERANGER a écrit :
> Are ov511_decomp, ov518_decomp & DC10 modules in new
> cooker kernel ?
>
> Thanks
--
EXCEPTIONNEL!
Tiscali lance les forfaits Internet Illimités,
à partir de 15,95EUR / mois.
Pour en profiter,cliquez ici: http://register.tiscali.fr/forfaits/
Offres soumises à conditions.

Re: [Cooker] perl-Digest-MD5

[Gueorgui Mihaylov]

That's what I want to say - there is no solution for
this problem into the current cooker. I expect someone
to say that it will be fixed later.
--- Todd Lyons <[EMAIL PROTECTED]> wrote:
> Gueorgui Mihaylov wrote on Wed, Jul 31, 2002 at
> 08:42:58PM -0700 :
> > I reported a problem with MD5 perl extension a
> couple
> > of days ago.
> > I hope, this time  mdk packager will respond.
> > Installing perl-Digest-MD5-2.20-1.1mdk over the
> > previous perl5.6 package gives no errors,but it
> just
> > doesn't solve the MD5 problem.
> 
> perl-Digest-MD5 is no longer a valid cooker package.
> 
> > I'll  mention again, source  install  of perl &
> MD5
> > works fine. For testing purposes :
> > http://neomail.sourceforge.net/  use setup.pl
> script
> > > perl >= 5.600 is needed by
> > > perl-Digest-MD5-2.20-1.1mdk
> > > perl-base >= 5.601 is needed by
> > > perl-Digest-MD5-2.20-1.1mdk
> > > and package perl-Digest-MD5 isn't listed on
> cooker
> > > mirrors..
> 
> There's your problem.  Cooker is now running perl
> 5.8.0.  You are
> running old programs.  
> 
> Blue skies... Todd
> -- 
>   Todd Lyons -- MandrakeSoft, Inc.  
> http://www.mandrakesoft.com/
> UNIX was not designed to stop you from doing stupid
> things, because 
>   that would also stop you from doing clever things.
> -- Doug Gwyn
>Cooker Version mandrake-release-9.0-0.2mdk Kernel
> 2.4.18-21mdk
> 

> ATTACHMENT part 2 application/pgp-signature 



__
Do You Yahoo!?
Yahoo! Health - Feel better, live better
http://health.yahoo.com

Re: [Cooker] perl-Digest-MD5

[Todd Lyons]

Gueorgui Mihaylov wrote on Wed, Jul 31, 2002 at 08:42:58PM -0700 :
> I reported a problem with MD5 perl extension a couple
> of days ago.
> I hope, this time  mdk packager will respond.
> Installing perl-Digest-MD5-2.20-1.1mdk over the
> previous perl5.6 package gives no errors,but it just
> doesn't solve the MD5 problem.

perl-Digest-MD5 is no longer a valid cooker package.

> I'll  mention again, source  install  of perl & MD5
> works fine. For testing purposes :
> http://neomail.sourceforge.net/  use setup.pl script
> > perl >= 5.600 is needed by
> > perl-Digest-MD5-2.20-1.1mdk
> > perl-base >= 5.601 is needed by
> > perl-Digest-MD5-2.20-1.1mdk
> > and package perl-Digest-MD5 isn't listed on cooker
> > mirrors..

There's your problem.  Cooker is now running perl 5.8.0.  You are
running old programs.  

Blue skies...   Todd
-- 
  Todd Lyons -- MandrakeSoft, Inc.   http://www.mandrakesoft.com/
UNIX was not designed to stop you from doing stupid things, because 
  that would also stop you from doing clever things. -- Doug Gwyn
   Cooker Version mandrake-release-9.0-0.2mdk Kernel 2.4.18-21mdk



msg69435/pgp0.pgp
Description: PGP signature

[Cooker] perl-Locale-Codes

[Michal 'hramrach' Suchanek]

perl 5.8 conflicts with the perl-Locale-Codes. Locale-Codes are probably
no longer needed and should be uninstalled automagically.

file /usr/share/man/man3pm/Locale::Constants.3pm.bz2 from
install of perl-Locale-Codes-2.01-2mdk conflicts with file from package
perl-5.8.0-4mdk
file /usr/share/man/man3pm/Locale::Country.3pm.bz2 from install
of perl-Locale-Codes-2.01-2mdk conflicts with file from package
perl-5.8.0-4mdk
file /usr/share/man/man3pm/Locale::Currency.3pm.bz2 from install
of perl-Locale-Codes-2.01-2mdk conflicts with file from package
perl-5.8.0-4mdk
file /usr/share/man/man3pm/Locale::Language.3pm.bz2 from install
of perl-Locale-Codes-2.01-2mdk conflicts with file from package
perl-5.8.0-4mdk
file /usr/share/man/man3pm/Locale::Script.3pm.bz2 from install
of perl-Locale-Codes-2.01-2mdk conflicts with file from package
perl-5.8.0-4mdk

-- 
Michal Suchanek
[EMAIL PROTECTED]

Re: [Cooker] perl-Digest-MD5

[Gueorgui Mihaylov]

I reported a problem with MD5 perl extension a couple
of days ago.
I hope, this time  mdk packager will respond.
Installing perl-Digest-MD5-2.20-1.1mdk over the
previous perl5.6 package gives no errors,but it just
doesn't solve the MD5 problem.
I'll  mention again, source  install  of perl & MD5
works fine. For testing purposes :
http://neomail.sourceforge.net/  use setup.pl script

> perl >= 5.600 is needed by
> perl-Digest-MD5-2.20-1.1mdk
> perl-base >= 5.601 is needed by
> perl-Digest-MD5-2.20-1.1mdk
> 
> and package perl-Digest-MD5 isn't listed on cooker
> mirrors..
> 
> -- 
> Linux 2.4.18-21mdk
> Mandrake Linux release 9.0 (Cooker) for i586 
> 1:02am up 2 days, 15:01, 6 users, load average:
> 0.00, 0.09, 0.12 
> 

> ATTACHMENT part 2 application/pgp-signature 



__
Do You Yahoo!?
Yahoo! Health - Feel better, live better
http://health.yahoo.com

[Cooker] perl-Digest-MD5

[Tibor Pittich]

if i want update perl packages, i get this strange situation:

perl >= 5.600 is needed by perl-Digest-MD5-2.20-1.1mdk
perl-base >= 5.601 is needed by perl-Digest-MD5-2.20-1.1mdk

and package perl-Digest-MD5 isn't listed on cooker mirrors..

-- 
Linux 2.4.18-21mdk
Mandrake Linux release 9.0 (Cooker) for i586 
1:02am up 2 days, 15:01, 6 users, load average: 0.00, 0.09, 0.12 



msg69140/pgp0.pgp
Description: PGP signature

Re: [Cooker] Perl MD5

[Stew Benedict]

On Tue, 30 Jul 2002, Gueorgui Mihaylov wrote:

> I didn't mention, my install is on pentium 3 machine.
> Please, no references to rpm packages, without
> testing.
>  I'm afraid, that if overlooked this problem will
> appear into the final 9.0 .
> 

???  I didn't "test" it as I have no occasion to use it at the moment.  I
was just trying to point you to the fact it is included, in contribs or at
least the description looks like what you are looking for:

"The perl-MD5 package provides the MD5 module for the Perl
programming language."

I was working on a ppc machine at the time.

> > > Perl scripts that require MD5 module are just
> > stuck if
> > > I install perl only with mdk packages, so I have
> > to
> > > download  from CPAN.  Source install works, but it
> > is
> > > much more time consuming, than having a ready rpm.
> > > 
> > > Gueorgui
> > > 
> > 
> > ls /RPMS-contrib/perl-MD5-1.7-12mdk.ppc.rpm
> > 
> > x86 version is available also of course
> > 
> > Stew Benedict
> > 

Stew Benedict