I have tested Securepoint firewall, and even though I messaged the service
staff there, I did not get any good answer from them about how to set this
up.
The only configuration I was able to see was the internal net - 1 ip
adress. It could be that I am totally ignorant here, but I must say that
setting up Windows2000 server after 10 minutes.. Everything I ever wanted
was up and running :)
I know this can be done using Linux.. Of course, but my problem is HOW? :)
The typical helping hand in the Linux community is to direct someone to a
howto document that contains nothing but old examples for like 2.0.36
kernel.. With lots of links to files that no longer excists.. That will not
do me any good when running e.g. Mandrake 8.0 with 2.4.x kernel.. Right? :)
Remember.. All what I do here has to be documented as seen from an Network
Admin role.. And not something that is impossible to reproduce... It's not
that simple to document patching odd .c files to get the kernel to compile
without errors you know.. :) Should be easier than that...
Sveinar Søpler
Tech Computers AS
Tlf : 22896022
Mail : [EMAIL PROTECTED] mailto:[EMAIL PROTECTED]
-Original Message-
From: John Johnson [mailto:[EMAIL PROTECTED]]
Sent: 3. mai 2001 17:47
To: [EMAIL PROTECTED]
Subject: Re: [Cooker-firewall] CookFire and NAT
IF Mandrake Firewall can't do the job there is a FREE Firewall software that
will, I must say it's not as Nice as mandrake firewall ( I don't think
anything is) but it will do what you want. It's called Securepoint firewall
and they have a freeware version. http://www.securepoint.cc, but don't give
up on mandrake firewall yet I would keep on that because of the ease of use
and how nice it is.
-John
- Original Message -
From: Sveinar Søpler [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Thursday, May 03, 2001 12:27 AM
Subject: [Cooker-firewall] CookFire and NAT
Is it possible to do nat'ing like this :
I have 128 public ip adresses from my ISP. I want to run several servers++
and want all my machines to use the public ip's i have from my ISP. Also
when i connect out from one of my machines to external source, like an FTP
server or IRC server, i want this to be connected from my real ip, and
not the firewall ip.
E.g. My inside box has ip adress : 192.168.0.100 My external adress should
the be nat'ed to 193.212.1.100 (masking away 192.168.0 for 193.212.1) The
next machine 192.168.0.154 should be 193.212.1.154 and so on..
Is this possible? I have been searching the net for such a solution, but the
only usable i get, is let's say you have one ip... .. But i have 128!
I want to be able to connect to 1 ip adress for my WEB server, another for
my FTP server+++, and NOT use Port mapping at all.. But the real
adress..
Could someone help me out? Is this a possibility in CookFire?
Sveinar Søpler
Servicekoordinator
Tech Computers
Tlf : 22896022
Mail : [EMAIL PROTECTED] mailto:[EMAIL PROTECTED]
