Re: [darktable-user] How to un-add/deselect one of two or more masks used by a module?

[KOVÁCS István]

Try the mask manager (left hand side, towards the bottom).
https://www.darktable.org/usermanual/en/mask_manager.html

Kofa


On Sun, 1 Apr 2018, 23:34 Martin,  wrote:

> darktable 2.4.2 on Ubuntu 16.04
>
> I struggle to figure out how to go from multiple masks to only have
> one mask applied to a module.
>


darktable user mailing list
to unsubscribe send a mail to darktable-user+unsubscr...@lists.darktable.org

Re: [darktable-user] The Good Knight

[August Schwerdfeger]

>From the joke screen, you can press "L" to go to the light table.

People complain about this every year. I myself was just using Darktable
today to show some photos on a projector and had to explain the joke to my
audience when the screen came up. Perhaps, since the developers assure us
 that it is not going to be
removed from Darktable, a section should be added to the user manual to
explain how to make the joke screen go away.

--
August Schwerdfeger
aug...@schwerdfeger.name

On Sun, Apr 1, 2018 at 8:03 PM, Charlie Goodwin 
wrote:

> This is incredibly stupid. I cannot get to the program.
>
> On Sun, Apr 1, 2018 at 3:25 PM, J Albrecht  wrote:
>
>>
>> On 01 Apr 2018, at 21:22, Chris  wrote:
>>
>> Hi,
>>
>> What is this 'The Dark Table Team Presents The Good Knight' rubbish that
>> appears when I try to open DarkTable?
>>
>> Some random DOS game? Makes me not trust this app one bit any more!
>>
>> Chris
>>
>> 
>> darktable user mailing list to unsubscribe send a mail to
>> darktable-user+unsubscr...@lists.darktable.org
>> 
>>
>>
>>
>> Long-time users of the program realised right away that this is
>> darktable’s annual April Fool’s joke. Don’t sweat it, it’ll be gone
>> tomorrow!
>>
>
>
> 
> darktable user mailing list to unsubscribe send a mail to
> darktable-user+unsubscr...@lists.darktable.org
>


darktable user mailing list
to unsubscribe send a mail to darktable-user+unsubscr...@lists.darktable.org

Re: [darktable-user] The Good Knight

[Charlie Goodwin]

This is incredibly stupid. I cannot get to the program.

On Sun, Apr 1, 2018 at 3:25 PM, J Albrecht  wrote:

>
> On 01 Apr 2018, at 21:22, Chris  wrote:
>
> Hi,
>
> What is this 'The Dark Table Team Presents The Good Knight' rubbish that
> appears when I try to open DarkTable?
>
> Some random DOS game? Makes me not trust this app one bit any more!
>
> Chris
>
> 
> darktable user mailing list to unsubscribe send a mail to
> darktable-user+unsubscr...@lists.darktable.org
> 
>
>
>
> Long-time users of the program realised right away that this is
> darktable’s annual April Fool’s joke. Don’t sweat it, it’ll be gone
> tomorrow!
>


darktable user mailing list
to unsubscribe send a mail to darktable-user+unsubscr...@lists.darktable.org

Re: [darktable-user] How to un-add/deselect one of two or more masks used by a module?

[darktable]

On Sun, 1 Apr 2018 16:47:18 -0700
David Vincent-Jones  wrote:

>Right click on the mask not wanted and it will be deleted.

I had exactly the problem and I would reset the module to erase the
unwanted masks and redo it again.

Thanks for the info

-- 
sknahT

vyS

darktable user mailing list
to unsubscribe send a mail to darktable-user+unsubscr...@lists.darktable.org

Re: [darktable-user] Printer recommendation / Experience w/ Epson driver and color?

[Howard Helsinger]

I'm happy with my older Canon Pixma Pro, and drivers from
http://www.turboprint.info/
For a small charge Turboprint will profile the printer.

On Sun, Apr 1, 2018 at 4:26 PM, Michael Below  wrote:

> Hi,
>
> I am looking at inkjet printers to print photos from darktable on
> Debian Linux. Any recommendations?
>
> The Epson XP-15000 looks good (A3+, networked, ca. 300 € in DE, main
> drawback probably expensive dye ink, which seems typical for the price
> range). But it seems to be too fresh for CUPS/Openprinting/Turboprint
> support. Epson says it is supported on Linux in its "ESC/P-R Driver 2
> (generic driver)" and the "Epson printer utility".
>
> Any experiences with this generic Epson driver/utility? Are there other
> solutions? Is there support for color profiles, a) for Epson inks and
> papers b) for third party papers, e.g. Canson Baryta?
>
> I would like to avoid having to buy further hardware for profiling,
> sending a few prints off for profiling makes probably more sense for a
> start, if there are no "sensible defaults" available.
>
> Cheers
> Michael
> 
> 
> darktable user mailing list
> to unsubscribe send a mail to darktable-user+unsubscribe@
> lists.darktable.org
>
>


-- 
Howard Helsinger - 5723 S. Kenwood, Chicago, IL 60637


darktable user mailing list
to unsubscribe send a mail to darktable-user+unsubscr...@lists.darktable.org

Re: [darktable-user] Printer recommendation / Experience w/ Epson driver and color?

[David Vincent-Jones]

I use an older Epson R2000 which gives me very good results. For some
time I have used Turboprint on a number of printers, I have found this
to be a better overall driver solution for my Linux needs. Under Linux I
found Epson drivers to be lacking full functionality. Red River paper
provides excellent results at a reasonable price point.

David

On 04/01/2018 04:57 PM, Patrick Shanahan wrote:
> * Michael Below  [04-01-18 16:28]:
>> Hi,
>>
>> I am looking at inkjet printers to print photos from darktable on
>> Debian Linux. Any recommendations?
>>
>> The Epson XP-15000 looks good (A3+, networked, ca. 300 € in DE, main
>> drawback probably expensive dye ink, which seems typical for the price
>> range). But it seems to be too fresh for CUPS/Openprinting/Turboprint
>> support. Epson says it is supported on Linux in its "ESC/P-R Driver 2
>> (generic driver)" and the "Epson printer utility".
>>
>> Any experiences with this generic Epson driver/utility? Are there other
>> solutions? Is there support for color profiles, a) for Epson inks and
>> papers b) for third party papers, e.g. Canson Baryta?
>>
>> I would like to avoid having to buy further hardware for profiling,
>> sending a few prints off for profiling makes probably more sense for a
>> start, if there are no "sensible defaults" available.
> 
> I used epson for quite a while, but hp provides hplip drivers for *most*
> of their printers, and the print heads are part of the ink cartridges. I
> am currently using the 8600 Officejet Pro series and everything works.
> 

darktable user mailing list
to unsubscribe send a mail to darktable-user+unsubscr...@lists.darktable.org

Re: [darktable-user] Printer recommendation / Experience w/ Epson driver and color?

[Patrick Shanahan]

* Michael Below  [04-01-18 16:28]:
> Hi,
> 
> I am looking at inkjet printers to print photos from darktable on
> Debian Linux. Any recommendations?
> 
> The Epson XP-15000 looks good (A3+, networked, ca. 300 € in DE, main
> drawback probably expensive dye ink, which seems typical for the price
> range). But it seems to be too fresh for CUPS/Openprinting/Turboprint
> support. Epson says it is supported on Linux in its "ESC/P-R Driver 2
> (generic driver)" and the "Epson printer utility".
> 
> Any experiences with this generic Epson driver/utility? Are there other
> solutions? Is there support for color profiles, a) for Epson inks and
> papers b) for third party papers, e.g. Canson Baryta?
> 
> I would like to avoid having to buy further hardware for profiling,
> sending a few prints off for profiling makes probably more sense for a
> start, if there are no "sensible defaults" available.

I used epson for quite a while, but hp provides hplip drivers for *most*
of their printers, and the print heads are part of the ink cartridges. I
am currently using the 8600 Officejet Pro series and everything works.

-- 
(paka)Patrick Shanahan   Plainfield, Indiana, USA  @ptilopteri
http://en.opensuse.orgopenSUSE Community Memberfacebook/ptilopteri
Registered Linux User #207535@ http://linuxcounter.net
Photos: http://wahoo.no-ip.org/piwigo   paka @ IRCnet freenode

darktable user mailing list
to unsubscribe send a mail to darktable-user+unsubscr...@lists.darktable.org

Re: [darktable-user] How to un-add/deselect one of two or more masks used by a module?

[David Vincent-Jones]

Right click on the mask not wanted and it will be deleted.

On 04/01/2018 02:33 PM, Martin wrote:
> darktable 2.4.2 on Ubuntu 16.04
> 
> Hello all,
> 
> I struggle to figure out how to go from multiple masks to only have
> one mask applied to a module.
> 
> So lets say I add Path #1 to my module and then select Path #2 as
> well. As expected in my module I see "drawn mask   2 shapes used"
> 
> From there I cannot figure out how to go back to 1 shapes used. Or in
> other words how do I deselect one of the two shapes?
> 
> I obviously tried all sorts of mouse actions but only made it worse. I
> have not found something related in the docs either.
> 
> Best regards,
> Martin
> 
> darktable user mailing list
> to unsubscribe send a mail to darktable-user+unsubscr...@lists.darktable.org
> 

darktable user mailing list
to unsubscribe send a mail to darktable-user+unsubscr...@lists.darktable.org

[darktable-user] How to un-add/deselect one of two or more masks used by a module?

[Martin]

darktable 2.4.2 on Ubuntu 16.04

Hello all,

I struggle to figure out how to go from multiple masks to only have
one mask applied to a module.

So lets say I add Path #1 to my module and then select Path #2 as
well. As expected in my module I see "drawn mask   2 shapes used"

>From there I cannot figure out how to go back to 1 shapes used. Or in
other words how do I deselect one of the two shapes?

I obviously tried all sorts of mouse actions but only made it worse. I
have not found something related in the docs either.

Best regards,
Martin

darktable user mailing list
to unsubscribe send a mail to darktable-user+unsubscr...@lists.darktable.org

[darktable-user] Printer recommendation / Experience w/ Epson driver and color?

[Michael Below]

Hi,

I am looking at inkjet printers to print photos from darktable on
Debian Linux. Any recommendations?

The Epson XP-15000 looks good (A3+, networked, ca. 300 € in DE, main
drawback probably expensive dye ink, which seems typical for the price
range). But it seems to be too fresh for CUPS/Openprinting/Turboprint
support. Epson says it is supported on Linux in its "ESC/P-R Driver 2
(generic driver)" and the "Epson printer utility".

Any experiences with this generic Epson driver/utility? Are there other
solutions? Is there support for color profiles, a) for Epson inks and
papers b) for third party papers, e.g. Canson Baryta?

I would like to avoid having to buy further hardware for profiling,
sending a few prints off for profiling makes probably more sense for a
start, if there are no "sensible defaults" available.

Cheers
Michael

darktable user mailing list
to unsubscribe send a mail to darktable-user+unsubscr...@lists.darktable.org

[darktable-user] The Good Knight

[Chris]

Hi,

What is this 'The Dark Table Team Presents The Good Knight' rubbish that
appears when I try to open DarkTable?

Some random DOS game? Makes me not trust this app one bit any more!

Chris



darktable user mailing list
to unsubscribe send a mail to darktable-user+unsubscr...@lists.darktable.org

[darktable-user] DT & Exif data (ex : Vacations)

[Jean-Luc CECCOLI]

Hello,

 

Merry Eastern to everyone.

 

I am just trying to understand where and how DT retrieves data from the exifs.

After reading the thread, I did a exiv2 -v ad -a -1:00:00 Test.nef.

The photo named Test.nef is one with no importance, so no matter what could 
happen to it.

Before applying the command to it, DT displayed 18:35:15 as shooting time.

After that, although exiv2 told it had modified 3 instances of the time, DT 
still displayed 18:35:15 instead of 17:35:15.

As I re-imported it after removing it frome the database, it can not be a 
matter of persistent data.

So, again, where does DT retrieve this unmodified time ?

 

 

 

> Message du 24/03/18 09:40
> De : "Hervé Sainct" 
> A : darktable-user@lists.darktable.org
> Copie à : 
> Objet : Re: [darktable-user] Vacations
> 
> 
> 
> Le 22/03/2018 à 14:46, darkta...@911networks.com a écrit :
> >> If xnviewmp works fine why not just using it?
> > I want to also do the ratings and labels but somehow I haven't
> > figured a way of importing these from xnviewmp to dt.
> >
> > I'm going for a while, so I'd like to be done with the dam before
> > coming back home.
> >
> FWIW, I use FastPhotoTagger as a quick initial sorter/tagger; it writes 
> directly inside the EXIF data (not creating any sidecar file) -I know 
> from a DT point of view this is a terrible sin, but I find this very 
> helpful : any search engine becomes terribly efficient (e. g. Recoll), 
> people you give your pics get them tagged too...
> The only draback in FastPhotoTagger is actually linked to that : when 
> upgrading the Exifs the filedates are changed.
> This sometimes is a concern, but a ferocious exiv2 rename -T *.* solves 
> it...
> http://fastphototagger.sourceforge.net/
> 
> darktable user mailing list
> to unsubscribe send a mail to darktable-user+unsubscr...@lists.darktable.org
> 
>

darktable user mailing list
to unsubscribe send a mail to darktable-user+unsubscr...@lists.darktable.org