Bug#309816: zile crashes when started from within Emacs (in GUD-mode)

[Simon Kagstrom]

On 2005-05-20, 01:44, Reuben Thomas wrote:
> On Thu, 19 May 2005, Simon Kågström wrote:
> 
> >zile crashes with a segmentation fault when I start it in GDB in emacs.  It
> >seems like zile lacks some checks for certain terminals. The bug with emacs
> >occurs in term_termcap.c:135 (term_refresh), where tgoto() returns NULL,
> >but that return value is never checked.
> 
> Thanks for this. If tgoto doesn't return a string, there's not much 
> point in Zile continuing, so what I anticipate doing is wrapping tgoto 
> so that its return value is checked, and if NULL, then Zile exits with a 
> fatal error. Does this seem reasonable? If Zile can't do cursor 
> positioning, there doesn't seem to be much point continuing.

Yes, I guess that's reasonable. I just tried vi from within Emacs/GUD (I'll
have the police after me now! ;-)), and vi starts but does not look correct
(does not clear the window). It is possible to quit it normally though and it
doesn't crash but it's very hard to edit anything.

I guess this is because Emacs/GUD doesn't behave like a real terminal, and I
would prefer if zile would just quit with an error message in situations like
this.

// Simon

Bug#309868: man page doesn't document passwords

[Martin Michlmayr]

Package: rss2email
Version: 1:2.54-2
Severity: minor

According to #249648, r2e does simple username/password
authentication.  However, the man page doesn't mention this feature or
how to enable it.


-- System Information:
Debian Release: 3.1
  APT prefers unstable
  APT policy: (500, 'unstable')
Architecture: i386 (i686)
Kernel: Linux 2.6.10-1-686
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)

Versions of packages rss2email depends on:
ii  python2.3.5-2An interactive high-level object-o

-- no debconf information

-- 
Martin Michlmayr
http://www.cyrius.com/


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#309867: fails in an ugly way when you do 'add' without 'new' first

[Martin Michlmayr]

Package: rss2email
Version: 1:2.54-2
Severity: minor

I just installed rss2email on a test machine to check something out
and immediately issued a 'r2e add' command, not remembering that I
have to do a 'r2e new' first.  r2e failed with the following ugly
message.  It would be nice if it would catch the Python exception and
print a message saying something like 'xx doesn't exist.  If you're
using r2e for the first time, you have to run "r2e new"'.


769:[EMAIL PROTECTED]: ~] r2e add xxx
Traceback (most recent call last):
  File "/usr/share/rss2email/rss2email.py", line 474, in ?
elif action == "add": add(*args)
  File "/usr/share/rss2email/rss2email.py", line 267, in add
feeds, feedfileObject = load()
  File "/usr/share/rss2email/rss2email.py", line 243, in load
feedfileObject = open(feedfile, 'r')
IOError: [Errno 2] No such file or directory: 'feeds.dat'
zsh: exit 1 r2e add xx


-- System Information:
Debian Release: 3.1
  APT prefers unstable
  APT policy: (500, 'unstable')
Architecture: i386 (i686)
Kernel: Linux 2.6.10-1-686
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)

Versions of packages rss2email depends on:
ii  python2.3.5-2An interactive high-level object-o

-- no debconf information

-- 
Martin Michlmayr
http://www.cyrius.com/


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#309313: mysql driver cannot retrieve data

[Markus Hoenicka]

Steve Langasek <[EMAIL PROTECTED]> was heard to say:


> Uh, linking libdbd-mysql against mysqlclient14 is not an option for sarge,
> as this is pretty much a guaranteed segfault in a mod_perl environment.
>

libdbd-mysql != libdbd-mysql-perl

I don't think that libdbi0 and libdb-mysql are required for mod_perl.

regards,
Markus

-- 
Markus Hoenicka
[EMAIL PROTECTED]
(Spam-protected email: replace the quadrupeds with "mhoenicka")
http://www.mhoenicka.de



-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#309313: mysql driver cannot retrieve data

[Steve Langasek]

On Fri, May 20, 2005 at 08:37:22AM +0200, Markus Hoenicka wrote:
> Steve Langasek <[EMAIL PROTECTED]> was heard to say:
> > Uh, linking libdbd-mysql against mysqlclient14 is not an option for sarge,
> > as this is pretty much a guaranteed segfault in a mod_perl environment.

> libdbd-mysql != libdbd-mysql-perl

> I don't think that libdbi0 and libdb-mysql are required for mod_perl.

Oh.

And, indeed libdbd-mysql already links against libmysqlclient14 in sarge and
sid.  So then, why are you suggesting a rebuild as a solution to this bug?

-- 
Steve Langasek
postmodern programmer


signature.asc
Description: Digital signature

Bug#309798: More information needed

[Christian Perrier]

Ludovic,

What is the target system ? The bug you report slightly sounds like
#302771, especially if the target is an XP system.

Could you also try to list a directory with less than 32 entries?

If needed please ping either me (bubulle) or Steve (vorlon) on IRC
irc.debian.org.

-- 

Bug#86138: Get your hookup on Tadalafil

[Quinn]

Same day Tadalafil delivery.
http://lxdXey.pq4.net/rx/sevy/benny.html

Quinn


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#309844: libocamlgsl-ocaml-dev: package should depend on libgsl0-dev

[Sylvain LE GALL]

Hello,

On Thu, May 19, 2005 at 07:33:27PM -0700, Steve Langasek wrote:
> On Fri, May 20, 2005 at 01:18:59AM +0200, Sylvain LE GALL wrote:
> > On Thu, May 19, 2005 at 10:26:09PM +0200, Remi Vanicat wrote:
> > > Package: libocamlgsl-ocaml-dev
> > > Version: 0.3.5-2
> > > Severity: grave
> 
> > > there seem to be a missing dependency, making compilation failed when
> > > linking: 
> > > $ cat test.ml
> > > let _ =
> > >  Gsl_error.init () ;
> > >  Gsl_rng.env_setup ()
> > > $ LANG=C ocamlopt -I +gsl bigarray.cmxa gsl.cmxa test.ml
> > > /usr/bin/ld: cannot find -lgsl
> > > collect2: ld returned 1 exit status
> > > Error during linking
> > > 
> > > and after "aptitude install libgsl0-dev"
> > > 
> > > $ LANG=C ocamlopt -I +gsl bigarray.cmxa gsl.cmxa test.ml
> > > $
> 
> > > I could try to write a fix and upload it this week end if you want,
> > > but don't count on it.
> 
> > The fix is trivial : libocamlgsl-ocaml-dev depends on libgsl0-dev. But
> > it needs to be uploaded to unstable AND to testing-proposed-updates
> 
> No, it does not.  Upload to unstable only, please; there's no reason for two
> uploads when libocamlgsl-ocaml-dev is currently at the same version in
> unstable and testing.

OK, i will upload to unstable and ask for a migration to testing.

Kind regard
Sylvain Le Gall


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#309793: 'newt' debconf translation - add lang Punjabi (pa-IN)

[Christian Perrier]

Quoting Amanpreet Singh Alam ([EMAIL PROTECTED]):
> Package: newt
> 
> Translation - debconf translation
> Language - Punjabi (pa_IN)
> 
> Can u please check and add langauge ?


To Alastair : please use pa_IN.po as file name. Punjabi has two
written forms (case similar to zh_TW and zh_CN).

Bug#309865: fails to restart from init.d/hotplug restart, and unable to deal with memory card reader

[John Shin]

Package: hotplug
Version: 0.0.20040329-22
Severity: normal

My problem mainly deals with a PQI high speed usb 2.0
reader (Travel
Flash) which I use to read/write SD cards. This is
with any
brands/capacity of SD cards that I have (from 128mb to
1 gig). When I
boot the pc with the card inserted, it is correctly
recognized and
correct device name is created under /dev/sdd1. Also,
when the computer
is already started, if I plug in the card, it usually
detects and
correct device name is created about 80% of the time.

However, when I remove the card and reinsert it,
correct device name in
/dev/ is not created. It might work the first
(re)insertion, but
afterwards, it will always not work. It might create
/dev/sdd, but this
won't work as memory card needs /dev/sdd1 to be
properly mounted.

DMESG shows that card is detected with correct
capacity, but correct
device name is not created in second+ insertion. This
is true whether I
properly unmount the card or not.

Currently, I run Debian Sarge. Interestingly, when I
used to run Ubuntu
Hoary, I had the same problem. Only way to fix the
problem was
init.d/hotplug restart, which will almost always allow
me to mount the
sd card. I tried this under Sarge, and this seems to
hang hotplug (thus
my mouse as well).

Thanks.


Some dmesg messages:
usb 5-3.4: new high speed USB device using address 6
scsi1 : SCSI emulation for USB Mass Storage devices
  Vendor: Generic   Model: STORAGE DEVICERev: 0119
Type:   Direct-Access  ANSI
SCSI revision: 02
SCSI device sda: 1984000 512-byte hdwr sectors
(1016 MB)
sda: assuming Write Enabled
sda: assuming drive cache: write through
 /dev/scsi/host1/bus0/target0/lun0: p1
 Attached scsi removable disk sda at scsi1,
channel 0, id 0, lun 0
   Vendor: Generic   Model: STORAGE DEVICERev:
0119
 Type:   Direct-Access 
ANSI SCSI revision:
 02
 Attached scsi removable disk sdb at scsi1,
channel 0, id 0, lun
 1
   Vendor: Generic   Model: STORAGE DEVICE   
Rev: 0119
 Type:   Direct-Access
 ANSI SCSI
 revision: 02
 SCSI device sdc: 1984000 512-byte hdwr
sectors (1016 MB)
--More--   

Vendor: Generic   Model: STORAGE DEVICERev: 0119
 Type:   Direct-Access
 ANSI SCSI
 revision: 02
 SCSI device sdc: 1984000 512-byte hdwr
sectors (1016 MB)
 sdc: assuming Write Enabled
 sdc: assuming drive cache: write through
  /dev/scsi/host1/bus0/target0/lun2: p1
  Attached scsi removable disk sdc at
scsi1, channel 0, id
  0, lun 2
Vendor: Generic   Model: STORAGE
DEVICERev: 0119
  Type:   Direct-Access   
  ANSI SCSI
  revision: 02
  Attached scsi removable disk sdd at
scsi1, channel 0,
  id 0, lun 3
  USB Mass Storage device found at 6



-- System Information:
Debian Release: 3.1
  APT prefers testing
  APT policy: (500, 'testing')
Architecture: i386 (i686)
Kernel: Linux 2.6.8-2-k7
Locale: LANG=ko_KR.UTF-8, LC_CTYPE=ko_KR.UTF-8
(charmap=UTF-8)

Versions of packages hotplug depends on:
ii  bash 2.05b-26The GNU
Bourne Again SHell
ii  debconf  1.4.30.13   Debian
configuration management sy
ii  grep 2.5.1.ds1-4 GNU grep,
egrep and fgrep
ii  module-init-tools3.2-pre1-2  tools for
managing Linux kernel mo
ii  modutils 2.4.26-1.2  Linux
module utilities
ii  procps   1:3.2.1-2   The /proc
file system utilities
ii  sed  4.1.2-8 The GNU
sed stream editor

-- debconf information:
  hotplug/ignore_pci_class_display: true
  hotplug/net_agent_policy: hotplug
  hotplug/static_module_list:
  hotplug/x11_usbmice_hack: false

& 
   



__ 
Yahoo! Mail Mobile 
Take Yahoo! Mail with you! Check email on your mobile phone. 
http://mobile.yahoo.com/learn/mail 


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#298899: Can I help get this packaged up?

[Roberto C. Sanchez]

I am very interested in seeing this recipe program get packaged and
into Debian.  I noticed that the ITP was filed 5 months ago.  Is there
anything I can do to help?

-Roberto

-- 
Roberto C. Sanchez
http://familiasanchez.net/~sanchezr


signature.asc
Description: OpenPGP digital signature

Bug#309798: smbclient eats all memory and cpu with a simple ls

[Christian Perrier]

Quoting Ludovic Drolez ([EMAIL PROTECTED]):
> Package: smbclient
> Version: 2.2.3a-14.1
> Severity: grave

Oh nice...seems that the release schedule is triggering RC bug
reports.:-(


> Justification: causes non-serious data loss
> 
> Hi !
> 
> We use smbclient to backup Windows systems with backuppc. Everything
> worked well on a woody until we upgraded to sarge.
> Now backuppc cannot backup anymore some systems and smbclient eats all
> available memory causing random processes to be killed, with a simple 'ls'
> done as a normal user.



> 
> Here's the output of smbclient:


We might need a level 10 debug output in case you have an opportunity
to reproduce this.

I'll try to reproduce it (I bet I won't..:-)).

Could you also check the eaxct version of the samba package? Very
probably 3.0.14a-1


Please also try using the package from sid : 3.0.14a-2. This could
indeed be #309003 (upstream bug #2622).

Bug#309820: sork-vacation

[Ola Lundqvist]

tags 309820 + patch
thanks

Hello

Thanks.

// Ola

On Thu, May 19, 2005 at 10:46:00PM +0300, Riku Valli wrote:
> Package: sork-vacation
> Version: 2.2.2-1
> Severity: important
> 
> >>sork-vacation is broke, you got message Can't parse your email address, 
> >>but you can remove vacation, but not made new one. It seems at 
> >>/usr/share/horde2/vacation/lib/Driver.php is changed ;-) and 
> >>/usr/share/php/Mail/RFC822.php too. I roll back RFC822.php from @version 
> >>$Revision: 1.12 $ to * @version $Revision: 1.11 $ and this gives back 
> >>functionality. I tried latest version 1.2 too, but seems at after 
> >>version 1.12 some think is changed. Forwards work maybe is possible take 
> >>code from Forward Driver.php, but i am not familiar with php.
> 
> quote ola
> >Can you file a separate bug against this package, and if possible a
> >patch? It would be really nice.
> quote end
> 
> and after while /etc/sork-vacation/conf.php
> $conf['vacation']['path'] = '/usr/local/bin/vacation'; should be 
> /usr/bin/vacation
> 
> and of course hash should be $conf['server']['params']['dbtype'] = 'hash3'; 
> not empty which is default. I remembered at this filed and default message 
> by Finnish all rows are in subject line, but this filed too.
> 
> Look more
> 
> http://lists.horde.org/archives/sork/Week-of-Mon-20050502/002166.html
> http://lists.horde.org/archives/sork/Week-of-Mon-20040726/001753.html
> and finally...
> 
> quoted Guillermo Vargas
> I have just changed one line and commented others and it works fine for 
> me. I don't now if this is the best way to do it.
> 
> In the file
> vacation/lib/Driver.php
> 
> change the line 166?
> $domain = ($realm != 'default') ? $realm : '';
> 
> for :
> $domain = ($realm != 'default') ? $realm : $this->params[$realm]['host'];
> 
> and comment the lines 177 178?
> $email .= !empty($parsed_email[$i]->host)
> ? '@' . $parsed_email[$i]->host
> :/ '';
> /
> I have tested this in horde-2.2.5(_make_email_address function) and 
> horde-3.0-ALPHA. (_makeEmailAddress function)
> 
> I also added the next "if " into the _parseForward function of 
> vacation/lib/Driver/forwards.php after the line Can't find
> "$content['forward']['receivers'] = implode(', ', $buffer);"
> if ( empty($content['vacation']) &&
> preg_match('/\|.*vacation\s*(-a\s+(.*))?\s+(.+)/', 
> $content['forward']['receivers'], $matches) ){
> $content['vacation']['alias'] = $matches[2];
> }
> 
> quote end...
> 
> I tried pick line numbers, but 
> I am not yet tested, but maybe tomorrow.
> 
> 
> -- System Information:
> Debian Release: 3.1
>  APT prefers testing
>  APT policy: (500, 'testing')
> Architecture: i386 (i686)
> Kernel: Linux 2.4.27-2-686-smp
> Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968)
> 
> Versions of packages sork-vacation depends on:
> ii  apache2-mpm-prefork [httpd]  2.0.54-3traditional model for Apache2
> ii  gettext  0.14.1-10   GNU Internationalization 
> utilities
> ii  horde2   2.2.8-1 horde web application suite
> ii  make 3.80-9  The GNU version of the 
> "make" util
> ii  php4 4:4.3.10-13 server-side, HTML-embedded 
> scripti
> ii  turba1.2.5-1 A web based contact manager
> 


-- 
 - Ola Lundqvist ---
/  [EMAIL PROTECTED] Annebergsslingan 37  \
|  [EMAIL PROTECTED] 654 65 KARLSTAD  |
|  +46 (0)54-10 14 30  +46 (0)70-332 1551   |
|  http://www.opal.dhs.org UIN/icq: 4912500 |
\  gpg/f.p.: 7090 A92B 18FE 7994 0C36  4FE4 18A1 B1CF 0FE5 3DD9 /
 ---


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#309681: util-vserver: Does not install on Sid

[Ola Lundqvist]

Hello

On Thu, May 19, 2005 at 01:50:23AM -0700, Steve Langasek wrote:
> On Thu, May 19, 2005 at 10:17:59AM +0200, Ola Lundqvist wrote:
> > tags 309681 + sid
> > thanks
> 
> > On Wed, May 18, 2005 at 09:42:52PM +0200, Tom Laermans wrote:
> > > Package: util-vserver
> > > Version: 0.30.204-1
> > > Severity: grave
> > > Justification: renders package unusable
> 
> > > util-vserver does not install on unstable due to dependency on beecrypt2
> > > which seems to have been removed from the debian system (it exists on
> > > woody and on sarge).
> 
> > Is it removed? That is not a good thing!
> 
> > Do you have any information on why it is removed, or if something else
> > can be used?
> 
> beecrypt6, probably.

Ok, thanks. I'll check that out.

Regards,

// Ola

> -- 
> Steve Langasek
> postmodern programmer



-- 
 - Ola Lundqvist ---
/  [EMAIL PROTECTED] Annebergsslingan 37  \
|  [EMAIL PROTECTED] 654 65 KARLSTAD  |
|  +46 (0)54-10 14 30  +46 (0)70-332 1551   |
|  http://www.opal.dhs.org UIN/icq: 4912500 |
\  gpg/f.p.: 7090 A92B 18FE 7994 0C36  4FE4 18A1 B1CF 0FE5 3DD9 /
 ---


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#309591: pmount: DANGEROUS default settings (sync)

[Steve Langasek]

Hi Sjoerd,

On Thu, May 19, 2005 at 12:20:13AM +0200, Sjoerd Simons wrote:
> On Wed, May 18, 2005 at 05:32:34PM +0200, Martin Pitt wrote:

> > Steve Langasek [2005-05-18  4:38 -0700]:
> > > > I read the thread and it convinced me to change the pmount default
> > > > from sync to async (which would be a trivial change) and replace the
> > > > --async option with a --sync option. The advantages (don't destroy
> > > > flash hardware and greatly speed up the writing process) outweigh the
> > > > disadvantages (protect users from corruption if they don't unmount
> > > > their drives) IMHO.

> > > > I will prepare the patch ASAP and send it to this bug. In the
> > > > meantime, would you accept this change for Sarge?

> > > If you think that's the correct course of action for addressing this bug,
> > > then yes.

> > Alright, I uploaded 

> >  pmount (0.8-2) unstable; urgency=high
> >  .
> >* Urgency high since this fixes an RC bug, the fix should reach Sarge.
> >* Added debian/patches/02-async_by_default.patch:
> >  - Mount devices 'async' by default instead of 'sync'. This will avoid
> >physical damage of flash chips due to exaggerated updating of 
> > inode/FAT
> >structures and greatly speed up the write throughput. On the bad side
> >this makes it much less safe to remove devices without proper 
> > umounting.
> >  - Replace option "--async" with option "--sync".
> >  - Document change in the manpages.
> >  - Closes: #309591
> >* debian/control: Correct package priority to optional, to match the 
> > katie
> >  overrides.

> > The applied patch can be seen at [1], it's pretty trivial.

> > I also talked with Sjoerd Simons (hal maintainer). Above pmount upload
> > will fix the issue for command line users of pmount, but for Utopia users
> > (i. e. who use gnome-volume-manager and hal) the policy needs to be
> > fixed in hal; this means nothing more than removing the sync/async
> > policy stanza from the policy XML file, so I kindly ask to approve
> > this as well (Sjoerd will prepare an update soon).

> Just uploaded hal 0.4.7-3sarge1 to testing-proposed-updates. This removes the
> sync option from the default setup and adds a warning to the example fdi 
> config
> file. 

> Please approve for Sarge.

If I'm reading right, this change also disables the noatime setting that was
previously enabled for small drives.  Wouldn't we want that to stay enabled?

Thanks,
-- 
Steve Langasek
postmodern programmer


signature.asc
Description: Digital signature

Bug#291274: openswan in sarge

[Steve Langasek]

On Wed, May 18, 2005 at 04:25:14PM -0600, Bdale Garbee wrote:
> severity 291274 important
> thanks

> I have just confirmed that the openswan package in sid works just fine out
> of the box on a sarge system running a prebuilt 2.6.8-2-686 kernel.  It 
> therefore seems completely inappropriate for this bug to be release-critical.

> Release team, please allow openswan back into sarge.  We had freeswan in 
> woody,
> and it's still in sarge.  Unfortunately, freeswan is no longer maintained 
> upstream, openswan is where development continues.  See www.freeswan.org for
> confirmation of this.  

I'm happy to let openswan 2.3.0-2 in now if the maintainer thinks it's
ready, but IIRC he had some other concerns about 2.3 that were unrelated to
this bug.  Rene?

-- 
Steve Langasek
postmodern programmer


signature.asc
Description: Digital signature

Bug#309863: ITP: xfce4-fsguard-plugin -- filesystem monitor plugin for the Xfce4 panel

[Rudy Godoy]

Package: wnpp
Severity: wishlist
Owner: Debian Xfce Maintainers <[EMAIL PROTECTED]>

* Package name: xfce4-fsguard-plugin
  Version : 0.2.0
  Upstream Author : Andre Lerche <[EMAIL PROTECTED]>
* URL : http://xfce-goodies.berlios.de/
* License : BSD
  Description : filesystem monitor plugin for the Xfce4 panel

 The fsguard plugin checks free space on a chosen mountpoint
 frequently and displays an alarm if free space is less than
 given alarm limit.
 .
 Homepage: http://xfce-goodies.berlios.de/

-- System Information:
Debian Release: 3.1
  APT prefers unstable
  APT policy: (500, 'unstable'), (1, 'experimental')
Architecture: powerpc (ppc)
Kernel: Linux 2.6.10-powerpc
Locale: LANG=es_PE.UTF-8, LC_CTYPE=es_PE.UTF-8 (charmap=UTF-8)


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#309862: ITP: xfce4-cpugraph-plugin -- cpu load grap plugin for the Xfce4 panel

[Rudy Godoy]

Package: wnpp
Severity: wishlist
Owner: Debian Xfce Maintainers <[EMAIL PROTECTED]>

* Package name: xfce4-cpugraph-plugin
  Version : 0.2.2
  Upstream Author : Alexander Nordfelth <[EMAIL PROTECTED]>
* URL : http://xfce-goodies.berlios.de/
* License : BSD
  Description : cpu load grap plugin for the Xfce4 panel

 The cpugraph plugin displays a graph from your latest systemload.
 .
 Homepage: http://xfce-goodies.berlios.de/

-- System Information:
Debian Release: 3.1
  APT prefers unstable
  APT policy: (500, 'unstable'), (1, 'experimental')
Architecture: powerpc (ppc)
Kernel: Linux 2.6.10-powerpc
Locale: LANG=es_PE.UTF-8, LC_CTYPE=es_PE.UTF-8 (charmap=UTF-8)


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#309843: [FTBFS]: makelist: Permission denied

[Pawel Wiecek]

On May 20, 12:21am, "Christian T. Steigies" wrote:
> The package failed to build on all arches, because makelist is not
> executable. In case you added it in your debian patch, and it was executable
> on your system, you have to make it executable in debian/rules, since the

Uhm no, it was broken upstream as I see. I'll add a workaround to
debian/rules...

Pawel

-- 
 (___)  | Pawel Wiecek -- Coven / Svart -- http://www.coven.vmh.net/ |
< o o > |  <[EMAIL PROTECTED]>GPG/PGP info in headers GSM: +48603240006 
 |
 \ ^ /  |*  *   Either throw the windows out of your computer,   *  *|
  (")   |*  *   or throw your computer out the window!   -- RMS  |


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#309839: gnumeric: insertion of chart failed

[J.H.M. Dassen (Ray)]

retitle 309839 goffice path problem broke charts in gnumeric
tags 309839 + sid confirmed
severity 309839 important
reassign 309839 libgoffice-1
close 309839
merge 309839 309608 309636 309656
thanks

On Thu, May 19, 2005 at 22:02:08 +0200, Remi Vanicat wrote:
> ii  libgoffice-1  0.0.1-1Document centric objects library 
> -

Before filing a bug report, please make sure the problem is still repeatable
after you've brought your system up to date.
-- 
Professionele hackers kunnen uw bedrijf veel schade berokkenen.
Snail-mail spam van het Nederlands Normalisatie-Instituut


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#309860: ITP: xfce4-genmon-plugin -- Generic Monitor for the Xfce4 panel

[Rudy Godoy]

Package: wnpp
Severity: wishlist
Owner: Debian Xfce Maintainers <[EMAIL PROTECTED]>

* Package name: xfce4-genmon-plugin
  Version : 1.1
  Upstream Author : Roger Seguin <[EMAIL PROTECTED]>
* URL : http://xfce-goodies.berlios.de
* License : LGPL
  Description : Generic Monitor for the Xfce4 panel

 This plugin cyclically spawn the indicated script/program, displaying
 its output as a string into the panel. It could be useful for
 periodic monitoring of program's status.
 .
 Homepage: http://xfce-goodies.berlios.de/

-- System Information:
Debian Release: 3.1
  APT prefers unstable
  APT policy: (500, 'unstable'), (1, 'experimental')
Architecture: powerpc (ppc)
Kernel: Linux 2.6.10-powerpc
Locale: LANG=es_PE.UTF-8, LC_CTYPE=es_PE.UTF-8 (charmap=UTF-8)


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#309861: ITP: xfce4-quicklauncher-plugin -- rapid launcher plugin for the Xfce4 panel

[Rudy Godoy]

Package: wnpp
Severity: wishlist
Owner: Debian Xfce Maintainers <[EMAIL PROTECTED]>

* Package name: xfce4-quicklauncher-plugin
  Version : 0.8
  Upstream Author : Masse Nicolas <[EMAIL PROTECTED]>
* URL : http://www.example.org/
* License : GPL
  Description : rapid launcher plugin for the Xfce4 panel

 Application launcher plugin for the Xfce panel.
 .
 Main differences from the original Xfce panel:
 .
 - Multiline support
 - Easy and fast configuration
 - Zoom effect
 .
 Homepage: http://xfce-goodies.berlios.de/

-- System Information:
Debian Release: 3.1
  APT prefers unstable
  APT policy: (500, 'unstable'), (1, 'experimental')
Architecture: powerpc (ppc)
Kernel: Linux 2.6.10-powerpc
Locale: LANG=es_PE.UTF-8, LC_CTYPE=es_PE.UTF-8 (charmap=UTF-8)


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#304483: mkinitrd does not create "mdadm -A" record for /boot partition on raid1 when initrd.img is built

[Erik van Konijnenburg]

On Thu, May 19, 2005 at 06:39:35PM -0700, rds wrote:
> 
> --- Erik van Konijnenburg <[EMAIL PROTECTED]> wrote:
> > Oops, there's indeed one other point you'll need to check:
> > you'll also need to make sure AUTOSTART is set correctly
> > in /etc/default/mdadm.
> 
> Tied a couple of changes with the following results (I'm not using udev):
> 
> # cat /etc/default/mdadm 
> # This file is automatically generated.
> # Run 'dpkg-reconfigure mdadm' to modify it.
> START_DAEMON=true
> MAIL_TO="root"
> AUTOSTART=false // or true, tried both

You'll need 'true' here. 

> # cat /etc/mdadm/mdadm.conf
> auto=md

This is Likely to be the problem: add auto=md to every
ARRAY line where you want /dev/mdX to be created,
not as a separate line; see man mdadm.conf(5).

Regards,
Erik


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#309255: nagios-plugins: check_ping segfaults if used for IPv6

[Guido Trotter]

On Fri, May 20, 2005 at 12:01:51AM +0200, Christoph Biedl wrote:

Hi!

> Christoph Biedl wrote...
> 
> > The actual magic should reside in the configure script.
> > The current (and broken) output is:
> > | checking for ICMP ping syntax... /bin/ping -n -U -w %d -c %d %s
> > | checking for ICMPv6 ping syntax... /bin/ping6 -n -U -c %d %s
> 
> Sorry to bother you again but I'd really like to see that fixed in
> sarge. The patch attached adds the test clause in configure, stolen from
> the IPv4 counterpart. Works for me.
> 

I'm sorry but from the last release update I don't think there is any chance to
get another new release in before sarge... :/

You can try asking on debian-release, though, and see if the release team is
willing to provide an exception.

Guido



-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#309859: please add simple patch for automatic lua syntax highlighting

[Greg Orlowski]

Package: vim-common
Version: 6.3-071+1

The current scripts.vim file (/usr/share/vim/vim63/scripts.vim), which
is used to detect a script's filetype when vim is launched, has no
entry for the lua language.

Here's the entry for perl (lines 89,91 in my file):

" Perl
  elseif s:name =~ 'perl'
set ft=perl 

Please add an entry like this for lua. The names are SOMEWHAT
alphabetized, but not really, so you can add it directly before perl
if you want.

"--CLIP (Here's the entry I added, just add the below 3 lines
" Lua
  elseif s:name =~ 'lua'
set ft=lua
"--CLIP

When this entry is added, syntax highlighting is automatically
detected for scripts that have something like:

#!/usr/bin/lua

as the shebang line. The lua.vim syntax highlighting definition file
already exists in the /syntax directory, but without the above entry
in scripts.vim, the filetype has to be set manually in vim for syntax
highlighting to work properly.

Thanks!
-Greg Orlowski

Bug#309313: mysql driver cannot retrieve data

[Steve Langasek]

On Wed, May 18, 2005 at 08:37:06PM +0200, Markus Hoenicka wrote:
>  > > Building libdbi and libdbi-drivers from CVS source cures both problems.

>  > Is the CVS source of a different version?

> Yes, there were a couple of changes to both libdbi and the libdbd-xx
> drivers. But I'm quite sure that it is not these source code changes
> that somehow fixed the problem on Debian. The library and the drivers
> were tested on various systems at release time, among them David
> Parker's Debian box. The driver did work for sure at release time. I
> rather suspect that the driver is incompatible with the current
> version of libmysqlclient.

>  > > I suggest rebuilding the package using recent versions of libmysqlclient.

>  > What version do you mean: of the libmysqlclient12 or the
>  > libmysqlclient14 package?

> I've been testing things on a box that ran MySQL 4.1, therefore I used
> the libmysqlclient14 package. The current CVS code contains a lot of
> functionality related to character encodings. I guess that
> libmysqlclient12 would not work anyway.

Uh, linking libdbd-mysql against mysqlclient14 is not an option for sarge,
as this is pretty much a guaranteed segfault in a mod_perl environment.

-- 
Steve Langasek
postmodern programmer


signature.asc
Description: Digital signature

Bug#309858: prctl_1.4-1(hppa/unstable): Please add hppa to architecture list

[lamont]

Package: prctl
Version: 1.4-1
Severity: normal

hppa is in the process of adding support for prctl, so please add hppa
to the architecture list.

Also, if the syscall returns EINVAL, it would be nice if prctl indicated
that support was probably missing from the kernel, if it doesn't do that
already.

thanks,
lamont


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#309857: ITP: skim -- Smart Common Input Method platform for KDE/QT

[William J Beksi]

-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Package: wnpp
Severity: wishlist
Owner: William J Beksi <[EMAIL PROTECTED]>
* Package name: skim
~  Version : 1.2.2
~  Upstream Author : liuspider <[EMAIL PROTECTED]>
* URL : http://www.scim-im.org/
* License : GPL
~  Description : Smart Common Input Method platform for KDE/QT
skim is an input method platform based upon scim-lib under *NIX systems
(including GNU/Linux and FreeBSD) optimized for KDE. It provides a GUI
panel (named scim-panel-kde), a KConfig config module and setup dialogs
for itself and libscim. It also has its own plugin system which supports
on-demand loadable actions.

-BEGIN PGP SIGNATURE-
Version: GnuPG v1.2.4 (GNU/Linux)
iD8DBQFCjVBcyy8yU+fh2zsRAmslAJsGXWuDSEGf1fFa/oS02f8Ftr3D3wCfYNRd
RudL3q7nHbMn9YV0NXdcO6E=
=l2Mw
-END PGP SIGNATURE-
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#302799: libgtkspell0: workaround for ' parsing

[Jonathan]

Package: libgtkspell0
Version: 2.0.10-1
Followup-For: Bug #302799

I decided to do some testing on this bug today, and I found a way to
make gtkspell handle words with ' in them appropriately.

It has a workaround version of gtk_text_iter_forward_word_end() named
gtkspell_text_iter_forward_word_end() (and another one for the 'back'
version) that is only enabled if the symbol FIXED_PANGO is not defined
in config.h.  The check that the configure script uses is simply if the
version of pango is greater than 1.8.0.

It seems that perhaps this check is somewhat too optimistic.

-- System Information:
Debian Release: 3.1
  APT prefers unstable
  APT policy: (500, 'unstable')
Architecture: i386 (i686)
Shell:  /bin/sh linked to /bin/bash
Kernel: Linux 2.6.10
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)

Versions of packages libgtkspell0 depends on:
ii  libaspell150.60.2+20050121-2 The GNU Aspell spell-checker runti
ii  libatk1.0-01.8.0-4   The ATK accessibility toolkit
ii  libc6  2.3.2.ds1-22  GNU C Library: Shared libraries an
ii  libglib2.0-0   2.6.4-1   The GLib library of C routines
ii  libgtk2.0-02.6.4-3   The GTK+ graphical user interface 
ii  libpango1.0-0  1.8.1-1   Layout and rendering of internatio

-- no debconf information


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#309844: libocamlgsl-ocaml-dev: package should depend on libgsl0-dev

[Steve Langasek]

On Fri, May 20, 2005 at 01:18:59AM +0200, Sylvain LE GALL wrote:
> On Thu, May 19, 2005 at 10:26:09PM +0200, Remi Vanicat wrote:
> > Package: libocamlgsl-ocaml-dev
> > Version: 0.3.5-2
> > Severity: grave

> > there seem to be a missing dependency, making compilation failed when
> > linking: 
> > $ cat test.ml
> > let _ =
> >  Gsl_error.init () ;
> >  Gsl_rng.env_setup ()
> > $ LANG=C ocamlopt -I +gsl bigarray.cmxa gsl.cmxa test.ml
> > /usr/bin/ld: cannot find -lgsl
> > collect2: ld returned 1 exit status
> > Error during linking
> > 
> > and after "aptitude install libgsl0-dev"
> > 
> > $ LANG=C ocamlopt -I +gsl bigarray.cmxa gsl.cmxa test.ml
> > $

> > I could try to write a fix and upload it this week end if you want,
> > but don't count on it.

> The fix is trivial : libocamlgsl-ocaml-dev depends on libgsl0-dev. But
> it needs to be uploaded to unstable AND to testing-proposed-updates

No, it does not.  Upload to unstable only, please; there's no reason for two
uploads when libocamlgsl-ocaml-dev is currently at the same version in
unstable and testing.

-- 
Steve Langasek
postmodern programmer


signature.asc
Description: Digital signature

Bug#294927: This bit me as well

[Roberto C. Sanchez]

I just got bit by this on a package I was preparing to try and get
sponsored.  While I agree that lintian shouldn't be required to
check the .orig.tar.gz, it should at least warn of an empty .diff.gz

That at least indicates that the maintainer screwed something up,
since any non-native package will have a .diff.gz associated with
it, and it being empty ought to set of a flag to lintian.

-Roberto
-- 
Roberto C. Sanchez
http://familiasanchez.net/~sanchezr


signature.asc
Description: OpenPGP digital signature

Bug#309794: cupsys: init-script completes before cupsd is fully running

[Kenshi Muto]

tags 309794 + pending

At Thu, 19 May 2005 17:34:21 +0200,
Martin Kittel wrote:
> Package: cupsys
> Version: 1.1.23-10
> Severity: important

> the init-script for cups /etc/init.d/cupsys simply starts cupsd in the
> background and then finishes immediately, although cupsd is not yet
> accepting requests.

Hmm, I see.

> I tagged this bug important because I think any user of the cups/samba
> (or another combination of cups with a program that is depending on cups
> being available during startup) can potentially run into this problem
> and it can be triggered (as it was in my case) by simply removing some
> packages that stretch the delay between running the cupsys init-script
> and the samba init-script.

It's too late to enter in Sarge (this problem isn't release-critical),
but I'll add "sleep 2" to wait daemon's wakeup in next upload (for
Sid and next testing Etch).

Thanks,
-- 
Kenshi Muto
[EMAIL PROTECTED]


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#309832: liferea: Liferea 0.9.2 Update Available

[David Moreno Garza]

On Thu, 2005-05-19 at 17:19 -0400, Nathan Conrad wrote:
> Liferea 0.9.2 was released on Monday.

I know, I have been experiencing some time troubles with real work and
life. The update will take place, hopefully, this weekend.

Cheers,

--
David Moreno Garza <[EMAIL PROTECTED]> | http://www.damog.net/
 Biologically speaking, if something bites you it's more likely to be
female. 
 GPG: C671257D - 6EF6 C284 C95D 78F6 0B78 FFD3 981C 5FD7 C671 257D



-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#309448: OpenAFS 1.3.81, SMP kernel, make-kpkg

[Russ Allbery]

Sam Hartman <[EMAIL PROTECTED]> writes:

> Just as an FYI, I'm running 1.3.81 on an SMP powermac g5 with no build
> or run problems.

Yeah, likewise we're running 1.3.81 built with make-kpkg on a bunch of x86
systems here, both SMP and otherwise.  Including all of the current
www.stanford.edu web server pool, in fact.

-- 
Russ Allbery ([EMAIL PROTECTED]) 


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#304483: mkinitrd does not create "mdadm -A" record for /boot partition on raid1 when initrd.img is built

[rds]

--- Erik van Konijnenburg <[EMAIL PROTECTED]> wrote:
> Oops, there's indeed one other point you'll need to check:
> you'll also need to make sure AUTOSTART is set correctly
> in /etc/default/mdadm.

Tied a couple of changes with the following results (I'm not using udev):

# cat /etc/default/mdadm 
# This file is automatically generated.
# Run 'dpkg-reconfigure mdadm' to modify it.
START_DAEMON=true
MAIL_TO="root"
AUTOSTART=false // or true, tried both

# cat /etc/mdadm/mdadm.conf
auto=md
ARRAY /dev/md1 level=raid1 num-devices=3
UUID=bdf8a233:fcf6d2af:d7771298:fac716f4
   devices=/dev/sda1,/dev/sdb1,/dev/sdc1
ARRAY /dev/md2 level=raid5 num-devices=3
UUID=2ed78bfb:aed805bf:7cc7e04b:e56f1342
   devices=/dev/sda2,/dev/sdb2,/dev/sdc2
ARRAY /dev/md3 level=raid5 num-devices=3
UUID=3232683c:698319a4:67aa8320:ae8fa7c7
   devices=/dev/sda3,/dev/sdb3,/dev/sdc3


The result is basically the same with "AUTOSTART=false or true" and "auto=md"
present or absent.

Thanks








__
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com 


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#163315: ntp: Using local clock as reference

[Alain Guibert]

Hello Yann,

 On Friday, October 4, 2002 at 3:43:47 PM +0200, Yann Droneaud wrote:

> I usualy use the local clock (RTC) as a fallback synchronization
> source. This source is quite always available on all computers, but
> should only use by ntpd if this clock is not modified by hands and set
> to UTC. (under GNU/Linux, kernel should also be built with /dev/rtc
> support.
>
> example ntp.conf:
> # local clock (cmos,rtc)
> server 127.127.1.0

This local clock driver uses the system clock, not the CMOS/RTC/hardware
clock. The RTC can be set to any timezone, and /dev/rtc is not needed.


Alain.


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#309448: OpenAFS 1.3.81, SMP kernel, make-kpkg

[Sam Hartman]

Hi.  I have not been paying attention to this issue as much as I would
like.

Just as an FYI, I'm running 1.3.81 on an SMP powermac g5 with no build
or run problems.



-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#309790: compiling *.el files should display errors, not just log file name

[Peter S Galbraith]

> install/debian-el: Handling emacs21, logged in /tmp/elc_oXqYUf.log
> install/debian-el: Handling xemacs21, logged in /tmp/elc_dzTAtg.log
> 
> However, this is not enough. dpkg _should_ display all Emacs Lisp
> compiler warnings if there were any during making the *.elc files.
> Now the user does not know form this output if all went ok or not.

Aren't we taking this a little far?

The average users couldn't care less about byte-compiler warnings.  If
the installation fails, he has the log file to send us for debugging.
If it goes well the logs can be deleted.  Showing byte-compilation
warning serves very few people.

Unless there's concensus on this from the debian-emacs mmailing list,
this is not a bug.

-- 
Peter S. Galbraith, Debian Developer  <[EMAIL PROTECTED]>
 http://people.debian.org/~psg
GPG key 1024/D2A913A1 - 97CE 866F F579 96EE  6E68 8170 35FF 799E


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#309855: kmail: GPG message index icon options

[Paul Johnson]

Package: kmail
Version: 4:3.3.2-3
Severity: wishlist

With "Configure|Appearance|Headers|General Options|Show crypto icons" 
enabled, kmail displays crypto icons indicating that kmail doesn't know 
whether or not it was signed or encrypted.  There should be a "...except 
when crypto status is unknown" option to suppress this behavior.

-- System Information:
Debian Release: 3.1
  APT prefers unstable
  APT policy: (500, 'unstable'), (500, 'testing'), (1, 'experimental')
Architecture: i386 (i686)
Shell:  /bin/sh linked to /bin/bash
Kernel: Linux 2.6.10-1-k7
Locale: LANG=en_US, LC_CTYPE=en_US (charmap=ISO-8859-1)

Versions of packages kmail depends on:
ii  kdelibs4 4:3.3.2-6   KDE core libraries
ii  libc62.3.2.ds1-22GNU C Library: Shared libraries an
ii  libgcc1  1:3.4.3-13  GCC support library
ii  libice6  6.8.1-0.4   Inter-Client Exchange library
ii  libkcal2a4:3.3.2-3   KDE calendaring library
ii  libkdenetwork2   4:3.3.2-3   KDE Network library
ii  libkdepim1   4:3.3.2-3   KDE PIM library
ii  libkleopatra0a   4:3.3.2-3   KDE GnuPG interface libraries
ii  libkpimidentities1   4:3.3.2-3   KDE PIM user identity information 
ii  libksieve0   4:3.3.2-3   KDE mail/news message filtering li
ii  libmimelib1a 4:3.3.2-3   KDE mime library
ii  libpng12-0   1.2.8rel-1  PNG library - runtime
ii  libqt3c102-mt3:3.3.4-3   Qt GUI Library (Threaded runtime v
ii  libsm6   6.8.1-0.4   X Window System Session Management
ii  libstdc++5   1:3.3.6-5   The GNU Standard C++ Library v3
ii  libx11-6 4.3.0.dfsg.1-13 X Window System protocol client li
ii  libxext6 6.8.1-0.4   X Window System miscellaneous exte
ii  perl 5.8.4-8 Larry Wall's Practical Extraction 
ii  xlibs6.8.1-0.4   X Window System client libraries m
ii  zlib1g   1:1.2.2-4   compression library - runtime

-- no debconf information


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#309724: sqlite-enabled bogofilter build

[Ben Finney]

On 19-May-2005, Clint Adams wrote:
> > Since 0.93.3, bogofilter has been able to use SQLite (>= 3.0.8) for
> > its database storage. Some problems were fixed in 0.94.2, and now
> > require SQLite (>= 3.2.0).
> 
> For what benefit?  Why not tdb or qdbm?

Ah, now I see what your "For what benefit?" is referring to. You
placed it under a statement of "bogofilter can now use sqlite", so I
thought you were asking me the benefit of that (which I thought was a
strange thing to ask).

Instead, I think you're asking me "for what benefit is a
sqlite-enabled build of bogofilter in Debian?"

In answer to that question, my answer is much the same: bogofilter is
capable of providing that alternative, and I'd like to be able to take
advantage of it in a Debian binary package.

If other backend storage is possible, there's even more reason to have
alternative builds of Debian: to use the capabilities provided by the
upstream software.

-- 
 \   "Pity the meek, for they shall inherit the earth."  -- Donald |
  `\  Robert Perry Marquis |
_o__)  |
Ben Finney <[EMAIL PROTECTED]>


signature.asc
Description: Digital signature

Bug#309724: sqlite-enabled bogofilter build

[Clint Adams]

> > For what benefit?
> 
> To provide an alternative to Berkeley DB.
> 
> > Why not tdb or qdbm?
> 
> I don't know; perhaps only because nobody's submitted the patches yet.

No, bogofilter has supported tdb and qdbm long before.  sqlite was the
last database backend to be added.


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#309854: RM: cantus3 -- RoM; no longer maintained upstream

[Igor Stroh]

Package: ftp.debian.org
Severity: normal
Please remove cantus3 from the archive (testing and unstable).
Justification:
 - the upstream is unresponsive
 - no new version since 2004-04-23
 - functionality is duplicated by other packages
Cheers,
Igor
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#309724: sqlite-enabled bogofilter build

[Clint Adams]

> Since 0.93.3, bogofilter has been able to use SQLite (>= 3.0.8) for
> its database storage. Some problems were fixed in 0.94.2, and now
> require SQLite (>= 3.2.0).

For what benefit?  Why not tdb or qdbm?


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#287985: I am interested

[Igor Stroh]

Hi Youssef,
are you still interested in taking over the maintenance for cantus?
If so, please take appropriate actions[0], otherwise I'll request the
removal of this package from debian archive (testing and unstable). If
you want to adopt cantus, the request for removal would be only with 
respect to testing.

Cheers,
Igor
[0]: http://www.debian.org/devel/wnpp/
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#300312: Reopening 300312

[Nelson A. de Oliveira]

reopen 300312
thanks

Hi

I am still getting missing files on my Apache's error log.

Some examples:

[Thu May 19 13:14:39 2005] [error] [client xxx.xxx.xxx.xxx] File does not
exist: /usr/share/flyspray/htdocs//includes/jscalendar/calendar-setup.js
[Thu May 19 13:14:39 2005] [error] [client xxx.xxx.xxx.xxx] File does not
exist: /usr/share/flyspray/htdocs//includes/jscalendar/calendar_stripped.js
[Thu May 19 13:14:39 2005] [error] [client xxx.xxx.xxx.xxx] File does not
exist: /usr/share/flyspray/htdocs//includes/jscalendar/calendar-win2k-1.css
[Thu May 19 13:14:39 2005] [error] [client xxx.xxx.xxx.xxx] File does not
exist: /usr/share/flyspray/htdocs//includes/jscalendar/lang/calendar-en.js
[Thu May 19 13:14:39 2005] [error] [client xxx.xxx.xxx.xxx] File does not
exist: /usr/share/flyspray/htdocs//themes//percent-10.png
[Thu May 19 21:03:02 2005] [error] [client xxx.xxx.xxx.xxx] File does not
exist: /usr/share/flyspray/htdocs//themes//percent-20.png
[Thu May 19 21:03:12 2005] [error] [client xxx.xxx.xxx.xxx] File does not
exist: /usr/share/flyspray/htdocs//themes//percent-0.png
[Thu May 19 21:03:20 2005] [error] [client xxx.xxx.xxx.xxx] File does not
exist: /usr/share/flyspray/htdocs//themes//percent-30.png

Flyspray version is 0.9.7-3

Thanks

Nelson A. de Oliveira


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#309788: dpkg-dev-el: debian-changelog-mode.el compile error: ** `(fboundp (quote imenu))' called for effect

[Jari Aalto]

| severity 309788 minor
| thanks
| 
| Jari Aalto <[EMAIL PROTECTED]> wrote:
| 
| > Package: dpkg-dev-el
| > Version: 24.10-1
| > Severity: normal
| > While compiling toplevel forms in file 
/usr/share/emacs21/site-lisp/dpkg-dev-el/deb
| > ian-changelog-mode.el:
| >   ** `(fboundp (quote imenu))' called for effect
| 
| You _know_ that's a warning and not an error.  I don't recall the
| details of why that was needed, but it's not an error.
| 
| Have a better suggestion that avoids the compiler warning?

Hi Peter,

I know, but compiler warnings gives me shivers. Howabout this?

Jari

--- debian-changelog-mode.el2005/05/19 23:43:20 1.1
+++ debian-changelog-mode.el2005/05/19 23:45:45 1.2
@@ -1513,9 +1513,8 @@
 ;;; imenu stuff - Peter Galbraith, May 2001
 
 (eval-when-compile
-  (require 'cl))
+  (require 'cl)
 (if (fboundp 'imenu);Make sure auto-load is loaded
-(eval-when-compile
   (require 'imenu)))
 
 (defvar debian-changelog-imenu-doing-closebug nil


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#309853: dh-make: CDBS option not working properly

[Nelson A. de Oliveira]

Package: dh-make
Version: 0.39
Severity: normal


Hi

With the new release supporting CDBS, I found some errors:

$ dh_make -c
Option c is ambiguous (cdbs, copyright)
(...)

But when looking on dh_make --help we see:

  -c, --copyright use  of license in copyright file
(gpl|lgpl|artistic|bsd)
(...)
  -b, --cdbsset package class to cdbs

It's saying that -b is for CDBS, but in fact, it's using -c!

Also, when using the CDBS option, the gererated watch.ex is:

# Example watch control file for uscan
# Rename this file to "watch" and then you can run the "uscan" command
# to check for upstream updates and more.
# Site  Directory   Pattern Version Script
version=2
sunsite.unc.edu /pub/Linux/Incoming gifsicle-(.*)\.tar\.gz  debian  uupdate

This file is different from the file generated without using CDBS.
It should be the same.

Running "fakeroot debian/rules clean" as described on debian/control, generated 
by dh_make, leaves us with a control file with "Architecture:" empty.

Also, "man dh_make" don't have the new option of CDBS.

Sorry if something that I said isn't really a bug.

Thanks
Nelson

-- System Information:
Debian Release: 3.1
  APT prefers unstable
  APT policy: (990, 'unstable'), (500, 'testing'), (1, 'experimental')
Architecture: i386 (i686)
Shell:  /bin/sh linked to /bin/bash
Kernel: Linux 2.6.11-mm1-biolinux1
Locale: LANG=pt_BR, LC_CTYPE=pt_BR (charmap=ISO-8859-1) (ignored: LC_ALL set to 
pt_BR)

Versions of packages dh-make depends on:
ii  debhelper 4.2.36 helper programs for debian/rules
ii  dpkg-dev  1.10.27Package building tools for Debian
ii  make  3.80-9 The GNU version of the "make" util
ii  perl  5.8.4-8Larry Wall's Practical Extraction 

-- no debconf information


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#275546: Possibly isolated bug -- no fix yet

[Lee Azzarello]

/usr/bin/rootstrap is a python script. It defines three kernel options which 
appear to not be used on sid.

'root=/dev/root',
'rootflags=/',
'rootfstype=hostfs',

But then:

# ls -l /dev/root
ls: /dev/root: No such file or directory

Which would imply the script mounts this after it is called. This search 
in /usr/lib/rootstrap feels like it's getting warmer:

# grep -n host *
builder:12:os.system("mount -t hostfs hostfs 
-o /etc/rootstrap /etc/rootstrap")
builder:16:os.mkdir("/tmp/host")
builder:17:os.system("mount -t hostfs hostfs /tmp/host")
builder:28:configfile = '/tmp/host' + 
os.path.expanduser(os.path.join('/tmp/host',os.path.expanduser(argsplit[1])))
builder:30:os.system("mount -t hostfs hostfs -o %s /etc/rootstrap/workdir" % 
workdir)
builder:68:os.system("mount -o remount,ro hostfs /")

This would imply a typo in the rootstrap script. But changing root=/dev/root 
to /tmp/root changes nothing.

The kernel message implies it can't find init, yet init is passed on the 
command line. In order to execute it, the UML kernel would have to aware 
of /usr/bin/python. My diagnosis is it isn't.

Other notable discoveries are that Matt Zimmerman has many bugs approaching or 
over a year old, yet in /usr/share/doc/rootstrap/changelog.Debian.gz says 
he's updated the package in 2004 and mentions Sarge.

-- 
-l[e^2]
-
chmod -R 777 /
chown -R nobody /
imagine true freedom


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#307654: doesn't handle UTF-8

[Martin Michlmayr]

* David Frey <[EMAIL PROTECTED]> [2005-05-17 21:18]:
> > I'll see what the status of UTF-8 in enscript is.
> It does not supprt it (Bug 229595:

That sucks.

> > What I found out in the meantime is that there's a program called
> > uniprint which handles it.
> 
> Interesting. This is useful information. I have not heard about it.

It's part of yudit, an editor.  But maybe it could be split into
separate packages.  Radovan, what do you think?
-- 
Martin Michlmayr
http://www.cyrius.com/


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#309816: zile crashes when started from within Emacs (in GUD-mode)

[Reuben Thomas]

On Thu, 19 May 2005, Simon Kågström wrote:
zile crashes with a segmentation fault when I start it in GDB in emacs.
It seems like zile lacks some checks for certain terminals. The bug with
emacs occurs in term_termcap.c:135 (term_refresh), where tgoto() returns NULL, 
but that
return value is never checked.
Thanks for this. If tgoto doesn't return a string, there's not much 
point in Zile continuing, so what I anticipate doing is wrapping tgoto 
so that its return value is checked, and if NULL, then Zile exits with a 
fatal error. Does this seem reasonable? If Zile can't do cursor 
positioning, there doesn't seem to be much point continuing.

The other obvious alternative, which might arguably be useful for 
debugging, as you were trying to, would be to have an empty string 
returned in this case, which will obviously result in the display being 
incorrect, which could be confusing...

Bug#309847: Acknowledgement (cupsys: Images printes as black boxes)

[Marius Kotsbak]

Reported at cups.org as STR #1187
(http://www.cups.org/str.php?L1187+P0+S-2+C0+I0+E0+QImages+printed+as+black+boxes)


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

debian-bugs-dist@lists.debian.org

[Reuben Thomas]

On Thu, 19 May 2005, Simon Kågström wrote:
Zile crashes with a core dump if I start it suspended (with &). I've
attached the core dump. When looking at it in GDB, the problem is on
line 307 in window.c:
Thanks very much for this report. Fix in CVS will go out with version
2.0.6. Whether there is anything that can be done for Sarge, I don't
know, unless it's considered a security or grave bug.

Bug#309603: dpkg-architecture thinks Linux is the Hurd

[Scott James Remnant]

On Wed, 2005-05-18 at 10:36 +0100, Colin Watson wrote:

> We had some fun with dpkg-architecture in Ubuntu this morning ...
> 
eep

> Turns out that dpkg-architecture iterates through cputable and ostable
> in whatever order the regexes happen to come out of the %cputable_re and
> %ostable_re hashes.
> 
Knew about it, fixed it, forgot to make a release, d'oh!

(It's patch-136)

> I fixed this using the following patch (I can't seem to get to your arch
> archive right now):
> 
Which address where you using?  ADSL router has decided to play dead
this week, so been on dial-up while they "investigate", so
arch.netsplit.com is kinda bouncy ... there's a (hopefully) up-to-date
mirror on people.ubuntu.com

Scott
-- 
Have you ever, ever felt like this?
Had strange things happen?  Are you going round the twist?


signature.asc
Description: This is a digitally signed message part

Bug#309852: electricsheep: electric sheep shows a "please upgrade" message

[Luke Schierer]

Package: electricsheep
Version: 2.5-2
Severity: important


I'm running amd64, but from
http://packages.qa.debian.org/e/electricsheep.html, the same package
version is in debian proper.  As you run this, it displays a blue bar
across the bottom with yellow text telling you that you need to
upgrade this package.  This represents a major detraction from this
package, please upgrade it.

-- System Information:
Debian Release: 3.1
Architecture: amd64 (x86_64)
Shell:  /bin/sh linked to /bin/bash
Kernel: Linux 2.6.11LS1
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)

Versions of packages electricsheep depends on:
ii  curl 7.13.2-2Get a file from an HTTP, HTTPS, FT
ii  debconf  1.4.49  Debian configuration management sy
ii  libc62.3.5-1 GNU C Library: Shared libraries an
ii  libexpat11.95.8-3XML parsing C library - runtime li
ii  libice6  4.3.0.dfsg.1-13 Inter-Client Exchange library
ii  libjpeg-progs6b-10   Programs for manipulating JPEG fil
ii  libjpeg626b-10   The Independent JPEG Group's JPEG 
ii  libpng12-0   1.2.8rel-1  PNG library - runtime
ii  libsm6   4.3.0.dfsg.1-13 X Window System Session Management
ii  libx11-6 4.3.0.dfsg.1-13 X Window System protocol client li
ii  libxext6 4.3.0.dfsg.1-13 X Window System miscellaneous exte
ii  libxv1   4.3.0.dfsg.1-13 X Window System video extension li
ii  xlibs4.3.0.dfsg.1-13 X Keyboard Extension (XKB) configu
ii  xloadimage   4.1-14.2Graphics file viewer under X11
ii  zlib1g   1:1.2.2-4   compression library - runtime

-- no debconf information


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#309850: belocs-locales-bin: new localedef.1 manual page

[Lars Wirzenius]

Package: belocs-locales-bin
Version: 2.3.4-8

See #309846. I updated the manual page for localedef.1. I suspect it is
relevant for belocs-locales-bin as well. If there are suggestions for
improvements, please send mail to #309846 so as to keep all the
information in the same place. Thanks.



-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#309851: madman: continuous play mode (beginnings of solution included)

[Chris Boyle]

Package: madman
Version: 0.93.0-3.1
Severity: wishlist
Tags: patch

When listening to madman for long periods of time, having to click the auto dj
command every so often is annoying. Of course you can click it many times
initially, but then you get repeated selections because it is oblivious to what
it just now added to the queue, and the recently played rules are otherwise
very good. So I thought it ought to be able to add songs to the playlist
whenever it is about to run out, and thus theoretically keep going forever.

Here is a patch which does that all the time, better would be to have a
checkbox just above the rule customisations in prefs, "add 20 more songs when
the last track starts". Probably should be off by default. Or even better,
"always keep at least [ 20] songs ahead of the current one (0 for off)" (number
configurable) so you can bump things up the queue if you want. I'll add such a
thing if I get time, but for now, here is what I'm running, because it works
for me.

diff -Naur madman-0.93.0-clean/ui/mainwin.cpp madman-0.93.0/ui/mainwin.cpp
--- madman-0.93.0-clean/ui/mainwin.cpp  2004-05-20 15:03:14.0 +0100
+++ madman-0.93.0/ui/mainwin.cpp2005-05-20 00:15:56.706493310 +0100
@@ -291,6 +291,8 @@
   this, SLOT(songOrStateChanged()));
   connect(&Preferences.Player, SIGNAL(stateChanged()), 
   this, SLOT(updatePlayerStatus()));
+  connect(&Preferences.Player, SIGNAL(lastSongStarted()), 
+  &SearchViewManager, SLOT(slotAutoDJ()));
 
   realizeSystemTrayIconSettings();
   realizeHttpdSettings();
diff -Naur madman-0.93.0-clean/utility/player.cpp 
madman-0.93.0/utility/player.cpp
--- madman-0.93.0-clean/utility/player.cpp  2004-05-20 15:03:13.0 
+0100
+++ madman-0.93.0/utility/player.cpp2005-05-19 23:54:59.610666975 +0100
@@ -59,6 +59,7 @@
   {
 connect(Backend.get(), SIGNAL(currentSongChanged()), this, 
SLOT(slotCurrentSongChanged()));
 connect(Backend.get(), SIGNAL(stateChanged()), this, 
SLOT(slotStateChanged()));
+connect(Backend.get(), SIGNAL(lastSongStarted()), this, 
SLOT(slotLastSongStarted()));
   }
 }
 
@@ -157,6 +158,10 @@
 {
   emit stateChanged();
 }
+void tPlayerFacade::slotLastSongStarted()
+{
+  emit lastSongStarted();
+}
 
 
 
diff -Naur madman-0.93.0-clean/utility/player.h madman-0.93.0/utility/player.h
--- madman-0.93.0-clean/utility/player.h2004-05-20 15:03:13.0 
+0100
+++ madman-0.93.0/utility/player.h  2005-05-19 23:55:16.002465562 +0100
@@ -60,6 +60,7 @@
   signals:
 void currentSongChanged();
 void stateChanged();
+void lastSongStarted();
 };
 
 
@@ -98,6 +99,7 @@
   protected slots:
 void slotCurrentSongChanged();
 void slotStateChanged();
+void slotLastSongStarted();
 };
 
 
diff -Naur madman-0.93.0-clean/utility/player_xmms.cpp 
madman-0.93.0/utility/player_xmms.cpp
--- madman-0.93.0-clean/utility/player_xmms.cpp 2004-05-20 15:03:13.0 
+0100
+++ madman-0.93.0/utility/player_xmms.cpp   2005-05-20 00:16:20.905810730 
+0100
@@ -237,6 +237,8 @@
   {
 CurrentSongFilename = song_file;
 emit currentSongChanged();
+if (xmms_remote_get_playlist_pos(Session) == 
xmms_remote_get_playlist_length(Session) - 1)
+  emit lastSongStarted();
   }
 }
 

-- System Information:
Debian Release: 3.1
  APT prefers unstable
  APT policy: (500, 'unstable'), (1, 'experimental')
Architecture: i386 (i686)
Shell:  /bin/sh linked to /bin/bash
Kernel: Linux 2.6.12-rc1
Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8)

Versions of packages madman depends on:
ii  libc6   2.3.5-1  GNU C Library: Shared libraries an
ii  libgcc1 1:3.4.3-13   GCC support library
ii  libglib1.2  1.2.10-10The GLib library of C routines
ii  libgtk1.2   1.2.10-17The GIMP Toolkit set of widgets fo
ii  libid3tag0  0.15.1b-6ID3 tag reading library from the M
ii  libogg0 1.1.2-1  Ogg Bitstream Library
ii  libqt3c102-mt   3:3.3.4-3Qt GUI Library (Threaded runtime v
ii  libstdc++5  1:3.3.6-5The GNU Standard C++ Library v3
ii  libvorbis0a 1.1.0-1  The Vorbis General Audio Compressi
ii  libvorbisfile3  1.1.0-1  The Vorbis General Audio Compressi
ii  libx11-64.3.0.dfsg.1-13  X Window System protocol client li
ii  libxext64.3.0.dfsg.1-13  X Window System miscellaneous exte
ii  libxi6  4.3.0.dfsg.1-13  X Window System Input extension li
ii  xlibs   4.3.0.dfsg.1-13  X Keyboard Extension (XKB) configu
ii  xmms1.2.10+cvs20050509-1 Versatile X audio player that look
ii  zlib1g  1:1.2.2-4compression library - runtime

-- no debconf information


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#305238: Fwd: Bug#305238: Installation report: AMD AThlonXP 1800+ / Abit KR7A-RAID133 (with Highpoint Raid controller)

[Ed Shornock]

Lennart Sorensen wrote:
> On Thu, May 19, 2005 at 07:23:44PM +0200, Frans Pop wrote:
> 
>>This installation report has not yet had a reply. As most of the issues 
>>seem amd64 kernel related, could someone from the AMD64 team please 
>>answer this report?
> 
> 
> Athlon XP = k7 = i386.  Athlon 64 = k8 = amd64.  This system can't even
> run amd64 and certainly wouldn't use an amd64 kernel. 

Very true, it would be classified as an i386. I do hope to get a
mobo/cpu that'll use an AMD64 kernel. :)

> It is just a
> plain simple i386 system (although a nice one).

Thanks for the compliment :)

As a follow up, I wiped the gentoo from my system and put on debian
unstable. EVERYTHING went well, AFTER I disabled the highpoint driver...

Edward J. Shornock


> 
>>--  Forwarded Message  --
>>
>>Subject: Bug#305238: Installation report: AMD AThlonXP 1800+ / Abit 
>>KR7A-RAID133 (with Highpoint Raid controller)
>>Date: Monday 18 April 2005 22:34
>>From: "Edward J. Shornock" <[EMAIL PROTECTED]>
>>To: [EMAIL PROTECTED]
>>
>>Package: installation-reports
>>
>>Debian-installer-version:
>>http://cdimage.debian.org/pub/cdimage-testing/sarge_d-i/i386/rc3/sarge-i3
>>86-netinst.iso downloaded on 2005-04-17
>>uname -a: Linux athlonxp 2.6.11-gentoo-r6 #1 Sun Apr 17 20:27:25 EDT
>>2005 i686 AMD Athlon(tm) XP 1800+ AuthenticAMD GNU/Linux Athlon(tm) XP
>>1800+ AuthenticAMD GNU/Linux
>>Date: 2005-04-17 @ 21:00 (approx)
>>How did you install?  Network Install (did not proceed with
>> installation) What did you install?  Sarge
>>  What did you boot off?  sarge-i386-netinst.iso dated 
>> 2005-03-25
>>
>>
>>Machine: Abit KR7A-RAID133, VIA Chipset (hand-built machine),
>>motherboard webpage at
>>http://www.abit-usa.com/products/mb/products.php?categories=1&model=87
>>
>>Processor: AthlonXP 1800+
>>Memory:1024MB PC2100 DDR
>>Root Device: IDE, /dev/hda
>>Root Size/partition table: not applicable
>>Output of lspci and lspci -n:
>>lspci output:
>> $ lspci
>>:00:00.0 Host bridge: VIA Technologies, Inc. VT8366/A/7 [Apollo
>>KT266/A/333]
>>:00:01.0 PCI bridge: VIA Technologies, Inc. VT8366/A/7 [Apollo
>>KT266/A/333 AGP]
>>:00:08.0 Ethernet controller: Lite-On Communications Inc LNE100TX
>>[Linksys EtherFast 10/100] (rev 25)
>>:00:0b.0 Communication controller: Agere Systems (former Lucent
>>Microelectronics) 56k WinModem (rev 01)
>>:00:0f.0 Multimedia audio controller: Cirrus Logic CS 4614/22/24
>>[CrystalClear SoundFusion Audio Accelerator] (rev 01)
>>:00:11.0 ISA bridge: VIA Technologies, Inc. VT8233A ISA Bridge
>>:00:11.1 IDE interface: VIA Technologies, Inc.
>>VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
>>:00:11.2 USB Controller: VIA Technologies, Inc. VT82x UHCI USB
>>1.1 Controller (rev 23)
>>:00:11.3 USB Controller: VIA Technologies, Inc. VT82x UHCI USB
>>1.1 Controller (rev 23)
>>:00:13.0 RAID bus controller: Triones Technologies, Inc.
>>HPT366/368/370/370A/372 (rev 05)
>>:01:00.0 VGA compatible controller: ATI Technologies Inc Radeon
>>RV200 QW [Radeon 7500]
>>
>>$ lspci -n
>>:00:00.0 Class 0600: 1106:3099
>>:00:01.0 Class 0604: 1106:b099
>>:00:08.0 Class 0200: 11ad:c115 (rev 25)
>>:00:0b.0 Class 0780: 11c1:0441 (rev 01)
>>:00:0f.0 Class 0401: 1013:6003 (rev 01)
>>:00:11.0 Class 0601: 1106:3147
>>:00:11.1 Class 0101: 1106:0571 (rev 06)
>>:00:11.2 Class 0c03: 1106:3038 (rev 23)
>>:00:11.3 Class 0c03: 1106:3038 (rev 23)
>>:00:13.0 Class 0104: 1103:0004 (rev 05)
>>:01:00.0 Class 0300: 1002:5157
>>
>>
>>Base System Installation Checklist:
>>[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
>>
>>Initial boot worked:[O]
>>Configure network HW:   [O]
>>Config network: [O]
>>Detect CD:  [E and O]
>>Load installer modules: [O]
>>Detect hard drives: [E and O]
>>Partition hard drives:  [ ]
>>Create file systems:[ ]
>>Mount partitions:   [O]
>>Install base system:[ ]
>>Install boot loader:[ ]
>>Reboot: [O]
>>
>>Comments/Problems:
>>
>>When booting off if the CD without any special parameters, the CD
>>detection process will hang for all eternity at the "IDE-generic"
>>module, with the following in `dmesg` output:
>>
>>HPT372: IDE controller at PCI slot :00:13.0
>>ACPI: PCI interrupt :00:13.0[A] -> GSI 10 (level, low) -> IRQ 10
>>HPT372: chipset revision 5
>>HPT37X: using 33MHz PCI clock
>>HPT372: 100% native mode on irq 10
>>ide2: BM-DMA at 0xc800-0xc807, BIOS settings: hde:DMA, hdf:DMA
>>ide3: BM-DMA at 0xc808-0xc80f, BIOS settings: hdg:pio, hdh:pio
>>hde: MAXTOR 6L080L4, ATA DISK drive
>>hdf: MAXTOR 6L080J4, ATA DISK drive
>>ide2 at 0xb800-0xb807,0xbc02 on irq 10
>>hde: max request size: 128KiB
>>hde: 156355584 sectors (80054 MB) w/1819KiB Cache, CHS=65535/16/63,
>>UDMA(133)
>> /dev/ide/host2/bus0/target0/lun0:<4>hde: dma_timer_expiry: dma status
>>== 0x65
>>hde: DMA inte

Bug#309844: libocamlgsl-ocaml-dev: package should depend on libgsl0-dev

[Sylvain LE GALL]

Hello,

On Thu, May 19, 2005 at 10:26:09PM +0200, Remi Vanicat wrote:
> Package: libocamlgsl-ocaml-dev
> Version: 0.3.5-2
> Severity: grave
> 
> there seem to be a missing dependency, making compilation failed when
> linking: 
> $ cat test.ml
> let _ =
>  Gsl_error.init () ;
>  Gsl_rng.env_setup ()
> $ LANG=C ocamlopt -I +gsl bigarray.cmxa gsl.cmxa test.ml
> /usr/bin/ld: cannot find -lgsl
> collect2: ld returned 1 exit status
> Error during linking
> 
> and after "aptitude install libgsl0-dev"
> 
> $ LANG=C ocamlopt -I +gsl bigarray.cmxa gsl.cmxa test.ml
> $
> 
> I could try to write a fix and upload it this week end if you want,
> but don't count on it.
> 

The fix is trivial : libocamlgsl-ocaml-dev depends on libgsl0-dev. But
it needs to be uploaded to unstable AND to testing-proposed-updates (since 
you submit a grave bug). I probably will do an RFS tomorrow night.

Regard
Sylvain Le Gall


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#309849: shorewall: Add Allow* Deny* rules for SMTP DCC server (Distributed Checksum Clearinghouse)

[Jari Aalto]

Package: shorewall
Version: 2.2.3-1
Severity: wishlist

The Distributed Checksum Clearinghouse or DCC is a cooperative, dis-
tributed system intended to detect "bulk" mail or mail sent to many
peo- ple.  It allows individuals receiving a single mail message to
determine that many other people have received essentially identical
copies of the message and so reject or discard the message.

   http://www.rhyolite.com/anti-spam/dcc/dcc-tree/FAQ.html
   Do I need to run a DCC server?

   ... When normally installed by the included Makefiles, DCC clients
   are configured to use the public DCC servers without any additional
   configuration, except to open firewalls to port 6277 (UDP).

-- System Information:
Debian Release: 3.1
  APT prefers unstable
  APT policy: (500, 'unstable'), (1, 'experimental')
Architecture: i386 (i686)
Shell:  /bin/sh linked to /bin/bash
Kernel: Linux 2.6.11-1-686
Locale: LANG=C, LC_CTYPE=C (charmap=ISO-8859-1) (ignored: LC_ALL set to en_US)

Versions of packages shorewall depends on:
ii  debconf   1.4.49 Debian configuration management sy
ii  iproute   20041019-3 Professional tools to control the 
ii  iptables  1.2.11-10  Linux kernel 2.4+ iptables adminis

-- debconf information excluded


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#309072: Where/how to get help/file a bug? azureus won't start with jdk-1_5_0_03-linux-amd64.bin packaged by java-package 0.24 was: Bug#309072

[Shaun Jackman]

On 5/19/05, gerhard <[EMAIL PROTECTED]> wrote:
> Hello Shaun,
> 
> keep in mind, that I'm more a designer than a programmer.
> 
> $ swingwtdemo
> libgcj failure: Duplicate class registration:
> java.awt.peer.ComponentPeer
> Abgebrochen
> But interesting too, is (Unfortunately , like in most cases, I post the
> whole bunch, because I dont' know the important part):

Grumble. I know I've seen this error message before. For me the
problem was the swingwtdemo binary depended on both libgcj.so.4 and
libgcj.so.5, which won't work. It should only depend on libgcj.so.4
Try...
$ ldd /usr/bin/swingwtdemo
$ ldd /usr/lib/libswt.so.3
$ ldd /usr/lib/libswt.so.4
# apt-get remove libgcj5
$ swingwtdemo

Try installing swingwtdemo from sid instead of hoary. Version 0.86.1-1
uses SWT 3.1, the same version as Azureus. swingwt-demo 0.85.1-1 uses
SWT 3.0.

> $ LANG=en sudo apt-get install swingwt-demo libgcj5-common
> Reading package lists... Done
> Building dependency tree... Done
> The following extra packages will be installed:
>   libgcj-common libgcj4 libgcj5 libswingwt0 libswt-gtk3 libswt-gtk3-jni
> The following NEW packages will be installed:
>   libgcj-common libgcj4 libgcj5 libgcj5-common libswingwt0 libswt-gtk3
>   libswt-gtk3-jni swingwt-demo
> >| What's that? Wasn't that already installed?

No. It was probably libswt-gtk-3.1-jni that was installed before.
libswt-gtk3-jni is an older version of the same library.

> Just an idea, because of the swt-gtk packages installed:
> I tried to start azureus (not from within the /usr/local/Azureus, which
> is not in the searchpath):
> Wow, it start's ?'+)&%$ What's that
> $ which azureus
> /usr/bin/azureus
> 
> There *is* something wrong in the dependencies of the azureus package,
> at least I think so
> Because I *never* *forced* an apt-get!
> Sorry about the rediculous exclamation marks, but this is 
> I'm confused...

Sorry, I'm not sure what's changed and why it suddenly started working
for you. If you think it's related to those packages you just
installed, you could try removing them one by one and see if any of
them cause azureus to stop working.

> $ cat /usr/bin/azureus
> #!/bin/sh
> . /usr/share/java-config/libswt-3.1-java
> if [ ! -d ~/.Azureus ]; then mkdir ~/.Azureus; fi
> cd ~/.Azureus
> exec java -Djava.library.path=/usr/local/jdk1.5.0_03/lib:/usr/lib \
> -classpath $JARS:/usr/share/java/Azureus2.jar \
> org.gudy.azureus2.ui.swt.Main "$@"

Regarding /usr/local/jdk1.5.0_03/lib, are you using the Debian
java-package Java package or one that's been installed by hand?

Cheers,
Shaun

Bug#309848: gcompris: key-events fix backported to sarge

[Yann Dirson]

On Fri, May 20, 2005 at 01:14:22AM +0200, Bruno Coudoin wrote:
> Package: gcompris
> Version: 6.5.2-3
> Severity: grave
> Tags: sarge
> 
> In the gcompris activity anim, draw, melody, click_on_letter there is a
> problem with key entries. For exemple in draw, entering a letter makes
> it apears twice.
> This is a problem in the way key event are handle in several activity.
> The patch fixes all these issues.

Preparing an update for sarge.  Release team: do i have the green
light for upload into testing ?

gcompris (6.5.2-4) testing; urgency=low

  * Backport to testing of RC bugs fixed in the sid package.
  * Changes from 6.5.4-4:
* Added missing dependency on python2.3-gnome2, without which no
  python board can work - that's about 20 boards in the most recent ones
  (Closes: #309838).
* Recommend python2.3-xml to be able to save SVG animations; mention
  it in extended description.
  * Upstream fix for key events being handled twice, breaking all
activities involving keyboard input (Closes: #309848).
  * Upstream patch also fixes the sample rate in SDL_Mixer initialization,
which causes breaks with some sound cards.
  
 -- Yann Dirson <[EMAIL PROTECTED]>  Fri, 20 May 2005 01:26:06 +0200

-- 
Yann Dirson<[EMAIL PROTECTED]> |
Debian-related: <[EMAIL PROTECTED]> |   Support Debian GNU/Linux:
|  Freedom, Power, Stability, Gratis
 http://ydirson.free.fr/| Check 


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#309841: kernel-headers-2.6.11-1-k7 symlinks

[Jurij Smakov]

On Thu, 19 May 2005, Signey John wrote:
Package: kernel-headers-2.6.11-1-k7
Version: 2.6.11-3
no files, all symlinks...
This is not a bug. This package contains only flavour (k7) specific 
header files, creating a bunch of symlinks to the flavour-independent
header files which come from the kernel-headers-2.6.11-1 (which this
package depends on). Are you experiencing any problems with such setup?

Best regards,
Jurij Smakov[EMAIL PROTECTED]
Key: http://www.wooyd.org/pgpkey/   KeyID: C99E03CC

--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#309848: Tags: sarge patch

[Bruno Coudoin]

Package: gcompris
Version: 6.5.2-3
Severity: grave
Tags: sarge

In the gcompris activity anim, draw, melody, click_on_letter there is a
problem with key entries. For exemple in draw, entering a letter makes
it apears twice.
This is a problem in the way key event are handle in several activity.
The patch fixes all these issues.

--- src/boards/algebra.c	2005-05-20 00:19:16.789483121 +0200
+++ ../gcompris/src/boards/algebra.c	2005-05-20 00:11:29.116875202 +0200
@@ -1,6 +1,6 @@
 /* gcompris - algebra.c
  *
- * Time-stamp: <2004/03/10 23:15:42 bcoudoin>
+ * Time-stamp: <2005/03/30 22:01:14 bruno>
  *
  * Copyright (C) 2000 Bruno Coudoin
  *
@@ -223,7 +223,7 @@
   gboolean stop = FALSE;
 
   if(!gcomprisBoard)
-return TRUE;
+return FALSE;
 
   /* Add some filter for control and shift key */
   switch (keyval)
--- src/boards/enumerate.c	2005-05-20 00:19:16.855460495 +0200
+++ ../gcompris/src/boards/enumerate.c	2005-05-20 00:11:29.253828230 +0200
@@ -176,7 +176,7 @@
   GnomeCanvasItem	*item = NULL;
 
   if(!gcomprisBoard)
-return TRUE;
+return FALSE;
 
   /* Add some filter for control and shift key */
   switch (keyval)
--- src/boards/gletters.c	2005-05-20 00:19:16.902444383 +0200
+++ ../gcompris/src/boards/gletters.c	2005-05-20 00:11:29.272821716 +0200
@@ -1,6 +1,6 @@
 /* gcompris - gletters.c
  *
- * Time-stamp: <2004/10/21 22:58:45 bruno>
+ * Time-stamp: <2005/03/30 21:41:45 bruno>
  *
  * Copyright (C) 2000 Bruno Coudoin
  * 
@@ -428,7 +428,7 @@
   g_message("in key_press: %d, %c, %lc",keyval,keyval,keyval);
 
   if(!gcomprisBoard)
-return TRUE;
+return FALSE;
 
   /* Add some filter for control and shift key */
   switch (keyval)
@@ -558,8 +558,6 @@
 
   gcompris_log_set_comment(gcomprisBoard, list_of_letters, str);
 
-  g_message("leaving key_press\n");
-
   return TRUE;
 }
 
--- src/boards/maze.c	2005-05-20 00:19:16.914440269 +0200
+++ ../gcompris/src/boards/maze.c	2005-05-20 00:11:29.311808344 +0200
@@ -881,7 +881,7 @@
   guint richting=0,level=gcomprisBoard->level;
 
   if(board_paused)
-return TRUE;
+return FALSE;
 
   if (threeDactive) return key_press_3D(keyval);
 
--- src/boards/paratrooper.c	2005-05-20 00:19:16.946429299 +0200
+++ ../gcompris/src/boards/paratrooper.c	2005-05-20 00:11:29.392780572 +0200
@@ -1,6 +1,6 @@
 /* gcompris - paratrooper.c
  *
- * Time-stamp: <2005/01/09 02:56:01 bruno>
+ * Time-stamp: <2005/03/30 22:04:44 bruno>
  *
  * Copyright (C) 2000 Bruno Coudoin
  *
@@ -230,7 +230,7 @@
 {
 
   if(!gcomprisBoard)
-return TRUE;
+return FALSE;
 
 
   /* Add some filter for control and shift key */
--- src/boards/planegame.c	2005-05-20 00:19:16.948428613 +0200
+++ ../gcompris/src/boards/planegame.c	2005-05-20 00:11:29.394779887 +0200
@@ -1,6 +1,6 @@
 /* gcompris - planegame.c
  *
- * Time-stamp: <2004/03/08 00:01:15 bcoudoin>
+ * Time-stamp: <2005/03/30 22:05:27 bruno>
  *
  * Copyright (C) 2000 Bruno Coudoin
  *
@@ -190,7 +190,7 @@
 {
 
   if(!gcomprisBoard)
-return TRUE;
+return FALSE;
 
   /* Add some filter for control and shift key */
   switch (keyval)
--- src/boards/shapegame.c	2005-05-20 00:19:17.033399473 +0200
+++ ../gcompris/src/boards/shapegame.c	2005-05-20 00:11:29.561722629 +0200
@@ -1,6 +1,6 @@
 /* gcompris - shapegame.c
  *
- * Time-stamp: <2004/11/09 00:29:43 bruno>
+ * Time-stamp: <2005/03/30 22:06:15 bruno>
  *
  * Copyright (C) 2000 Bruno Coudoin
  *
@@ -335,7 +335,7 @@
   gboolean stop = FALSE;
 
   if(!gcomprisBoard)
-return TRUE;
+return FALSE;
 
   /* Add some filter for control and shift key */
   switch (keyval)
--- src/boards/smallnumbers.c	2005-05-20 00:19:17.035398787 +0200
+++ ../gcompris/src/boards/smallnumbers.c	2005-05-20 00:11:29.563721943 +0200
@@ -1,6 +1,6 @@
 /* gcompris - smallnumbers.c
  *
- * Time-stamp: <2005/02/01 00:39:36 bruno>
+ * Time-stamp: <2005/03/30 22:07:06 bruno>
  *
  * Copyright (C) 2000 Bruno Coudoin
  * 
@@ -194,7 +194,7 @@
   char str[2];
 
   if(!gcomprisBoard || !boardRootItem)
-return TRUE;
+return FALSE;
 
   /* Add some filter for control and shift key */
   switch (keyval)
--- src/boards/target.c	2005-05-20 00:19:17.064388846 +0200
+++ ../gcompris/src/boards/target.c	2005-05-20 00:11:29.571719200 +0200
@@ -231,7 +231,7 @@
   guint c;
 
   if(!gcomprisBoard)
-return TRUE;
+return FALSE;
 
   /* Add some filter for control and shift key */
   switch (keyval)
--- src/boards/wordsgame.c	2005-05-20 00:19:17.068387474 +0200
+++ ../gcompris/src/boards/wordsgame.c	2005-05-20 00:11:29.577717143 +0200
@@ -1,6 +1,6 @@
 /* gcompris - wordsgame.c
  *
- * Time-stamp: <2004/11/14 15:13:11 bruno>
+ * Time-stamp: <2005/03/30 21:40:02 bruno>
  *
  * Copyright (C) 2000 Bruno Coudoin
  * 
@@ -227,10 +227,10 @@
 LettersItem *item;
 
 if(!gcomprisBoard)
-	return TRUE;
+	return FALSE;
 
 if(!g_unichar_isalnum (gdk_keyval_to_unicode (keyval)))
-	return TRUE;
+	return FALSE;
 
 
   /* Add some filter for control and shift key */
@@ -361,7 +361,7 @@
 	}
 
   g_free(let

Bug#309847: cupsys: Images printes as black boxes

[Marius Kotsbak]

Package: cupsys
Version: 1.1.23-10
Severity: normal

The images on page 5 in this pdf:
http://www.imec.be/essderc/papers-97/315.pdf
are printed as black boxes, using whatever pdf reader.

See my bug http://bugs.kde.org/show_bug.cgi?id=105856

And see a related bug: http://bugs.kde.org/show_bug.cgi?id=80704 in
kghostview.

-- System Information:
Debian Release: 3.1
  APT prefers testing
  APT policy: (500, 'testing')
Architecture: i386 (i686)
Kernel: Linux 2.4.26-1-k7
Locale: LANG=no_NO, LC_CTYPE=no_NO (charmap=ISO-8859-1)

Versions of packages cupsys depends on:
ii  adduser 3.63 Add and remove users and groups
ii  debconf 1.4.30.13Debian configuration management sy
ii  libc6   2.3.2.ds1-21 GNU C Library: Shared libraries an
ii  libcupsimage2   1.1.23-10Common UNIX Printing System(tm) - 
ii  libcupsys2-gnutls10 1.1.23-10Common UNIX Printing System(tm) - 
ii  libgnutls11 1.0.16-9 GNU TLS library - runtime library
ii  libpam0g0.76-22  Pluggable Authentication Modules l
ii  libpaper1   1.1.14-3 Library for handling paper charact
ii  libslp1 1.0.11a-2OpenSLP libraries
ii  patch   2.5.9-2  Apply a diff file to an original
ii  perl-modules5.8.4-8  Core Perl modules
ii  xpdf-utils  3.00-13  Portable Document Format (PDF) sui
ii  zlib1g  1:1.2.2-4compression library - runtime

-- debconf information:
* cupsys/raw-print: true
* cupsys/backend: ipp, lpd, parallel, socket, usb


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#211544: ITP: yaws -- Yet Another Web Server

[Will Newton]

retitle 211544 ITP: yaws -- Yet Another Web Server
quit

No packages publicly available just yet, but I'm working on this.



-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#309846: locales: new localedef.1 manual page

[Lars Wirzenius]

Package: locales
Version: 2.3.5-2

Attached is a new version of the localedef.1 manual page
(debian/local/manpages/localedef.1) and a diff against the previous
version (the former is there so that people who want to review it can
more easily get a complete version).

I have added descriptions of options that were missing (presumably added
since the manual page was originally written years ago), and clarified
the behavior in general. I hope it is complete and correct, but it might
not be. I had to read through the source and experiment, and I may have
overlooked or misinterpreted something. Should be better than the
current version, however.

Hopefully this is useful. Happy hacking.

.TH LOCALEDEF 1 "May 20, 2005"
.SH NAME
localedef \- compile locale definition files
.SH SYNOPSIS
.ad l
.nh
.B localedef
.RI [ options ]
.I outputpath
.br
.B "localedef \-\-list\-archive"
.RI [ options ]
.br
.B "localedef \-\-delete\-from\-archive"
.RI [ options ]
.IR localename " ..."
.br
.B "localedef \-\-add\-to\-archive"
.RI [ options ]
.IR compiledpath
.br
.B "localedef \-\-version"
.br
.B "localedef \-\-help"
.br
.B "localedef \-\-usage"
.ad b
.hy
.SH DESCRIPTION
The
.B localedef
program reads the indicated
.I charmap
and
.I input
files, compiles them to a binary form quickly usable by the
.BR locale (7)
functions in the C library, and places the output in 
.IR outputpath .
.PP
If
.I outputpath
contains a slash character ('/'), it is directly the name of the output
directory.
In this case, there is a separate output file for each locale category
(LC_CTIME, LC_NUMERIC, and so on).
.PP
Otherwise, if the 
.B \-\-no\-archive
option is used,
.I outputpath
is the name of a subdirectory in
.B /usr/lib/locale
where per-category compiled files are placed.
.PP
Otherwise, 
.I outputpath
is the name of a locale and the compiled locale data is added to the
archive file 
.BR /usr/lib/locale/locale-archive .
.PP
If no
.I charmapfile
is given, the value
.I POSIX
is used by default.
If no
.I inputfile
is given, or if it is given as a dash
.RB ( \- ),
.B localedef
reads from standard input.
.SH OPTIONS
Most options can have either short or long forms.  If multiple short
options are used, they can be combined in one word (for example,
.B \-cv 
is identical to
.BR "\-c \-v" ).
.PP
If a short option takes an argument, the argument can be given separately
as the next word
.RB ( "\-f foo" ), 
or it can be written together with the option letter
.RB ( \-ffoo ).
If a long option takes an argument, the argument can be given separately
as the next word, or it can be written as option=argument 
.RB ( \-\-charmap=foo ).
.SS "Operation selection options"
A few options direct 
.B localedef
to do something else than compile locale definitions.
Only one of these should be used at a time.
.TP
.B \-\-delete\-from\-archive
Delete the named locales from the locale archive file.
.TP
.B \-\-list\-archive
List the locales contained in the locale archive file.
.TP
.B \-\-add\-to\-archive
Add the 
.I compiledpath
directories to the locale archive file.
The directories should have been created by previous runs of 
.BR localedef ,
using 
.BR \-\-no\-archive .
.SS "Other options"
Some of the following options are only sensible for some operations; hopefully 
it is self-evident which ones.
.TP
.BI \-f " charmapfile" ", \-\-charmap=" charmapfile
Specify the file that defines the symbolic character names that are
used by the input file.  If the file is in the default directory for
character maps, it is not necessary to specify the full pathname.
This default directory is printed by
.BR "localedef \-\-help" .
.TP
.BI \-i " inputfile" ", \-\-inputfile=" inputfile
Specify the locale definition file to compile.  If
.I inputfile
is not absolute,
.B localedef
will also look in the directory specified by the environment variable
.B I18NPATH
and in the default directory for locale definition files.  This default
directory is printed by
.BR "localedef \-\-help" .
.TP
.BI \-u " repertoirefile" ", \-\-repertoire-map=" repertoirefile
Read mappings from sybolic names to Unicode UCS4 value from
.IR repertoirefile .
.TP
.BI \-A " aliasfile" ", \-\-alias\-file=" aliasfile
Use 
.I aliasfile
to look up aliases for locale names.
There is no default aliases file.
.TP
.BI \-\-prefix= pathname
Set prefix to be prepended to the full archive pathname.
By default, the prefix is empty.
Setting the prefix to 
.IR foo ,
the archive would be placed in
.BR foo/usr/lib/locale/locale/locale-archive .
.TP
.B "\-c, \-\-force"
Write the output files even if warnings were generated about the input
file.
.TP
.B \-\-old\-style
Create old-style tables.
.TP
.B "\-v, \-\-verbose"
Generate extra warnings about errors that are normally ignored.
.TP
.B \-\-quiet
Suppress all notifications and warnings, and report only fatal errors.
.TP
.B \-\-posix
Be strictly POSIX conformant.  Implies
.BR \-\-verbose .
This option currently has no other effect.  Posix conformance is
assumed if the environment variable
.B POSIX

Bug#309845: freepops: polling hotmail accounts fails

[Jamie L. Penman-Smithson]

package: freepops
version: 0.0.27-2
severity: important

Starting on Wednesday freepops has been unable to collect mail from any
Hotmail accounts. I've verified that the accounts are still active and
that the username/passwords are correct, accessing the accounts via
www.hotmail.com works fine.

Severity important since this means that freepops can't be used to poll
hotmail accounts, which has a "major affect on usability" IMHO.

Here's the debug output:

---
freepops started with loglevel 2 on a little endian machine.
DBG(popserver.c, 166): [18599] ?? Ip address 0.0.0.0 real port 3000

DBG(popserver.c, 166): [18599] ?? Ip address 127.0.0.1 real port 3000

DBG(popserver.c, 166): [18599] -> +OK FreePOPs/0.0.27 pop3 server ready

DBG(popserver.c, 166): [18599] <- user [EMAIL PROTECTED]

DBG(log_lua.c,  83): (@/usr/share/freepops/lua/hotmail.lua, 1017) :
hotmail.com(0.0.9a) found!

DBG(log_lua.c,  83): (@/usr/share/freepops/lua/hotmail.lua, 1056) :
hotmail.com(0.0.9a) initialized!

DBG(popserver.c, 166): [18599] -> +OK PLEASE ENTER PASSWORD

DBG(popserver.c, 161): [18599] <- PASS *

LUAY: lua error message:
LUAY:/usr/share/freepops/lua/browser.lua:460: bad argument #2 to
`setopt' (string expected, got nil)

LUAY: lua stack traceback:
LUAY:[C]: setopt: -1 (C method)
LUAY:/usr/share/freepops/lua/browser.lua: post_uri: 460 (Lua method)
LUAY:/usr/share/freepops/lua/hotmail.lua: loginHotmail: 249 (Lua
global)

DBG(popserver.c, 166): [18599] -> -ERR UNKNOWN ERROR, PLEASE FIX

UNKNOWN ERROR, PLEASE FIX
DBG(threads.c,  81): thread 0 will die
---

The line in question is this:

---
function Private.post_uri(self,url,post,exhed)
local gl_b,gl_h = {},{}

self.curl:setopt(curl.OPT_POST,1)
=>  self.curl:setopt(curl.OPT_POSTFIELDS,post) <==
self.curl:setopt(curl.OPT_CUSTOMREQUEST,"POST")

Hidden.build_header(self,url,exhed)

local rc,err = Hidden.perform(self,url,gl_h,gl_b)

return Hidden.continue_or_return(rc,err,gl_b,

--Private.post_uri,self,Hidden.mangle_location(self,err),post,exhed)

Private.get_uri,self,Hidden.mangle_location(self,err),exhed)
end
[...]
---

It might have something to do with Hotmail requiring Javascript.
Although I'm not sure if that's new or not, not having a Hotmail account
myself..

---
JavaScript required to sign in

   The Microsoft Passport Network requires JavaScript to sign in. This
web browser either does not support JavaScript, or scripts are
   being blocked.
---

Thanks,

-- 
-Jamie L. Penman-Smithson <[EMAIL PROTECTED]>
 t: +44 1273 424795; f: +44 1273 424795
 PGP: C0A7 955E EED6 A309 23D7 863B C76A 26A3 F0DC FCA8
 never send mail to: [EMAIL PROTECTED]


signature.asc
Description: This is a digitally signed message part

Bug#307332: azureus: Azureus should call update-desktop-database in postinst/postrm

[Shaun Jackman]

package azureus
reopen 307332
thanks

The MimeType entry in azureus.desktop doesn't do anything unless you
call update-desktop-database from the postinst script. dh_desktop can
take care of this for you.

Bug#309448: OpenAFS 1.3.81, SMP kernel, make-kpkg

[Russ Allbery]

Vladimir Konrad <[EMAIL PROTECTED]> writes:

> I have discussed possibility of remote access (ssh) for you to the
> server and it is agreed that you can do it. If you are interested, I can
> e-mail you the IP and the password. There is nothing important on the
> server at the moment.

I should have some time tonight to do this and I'd be glad to take a look.
Please let me know what you're happy to have me do or not do in terms of
building, loading modules, etc.

My GnuPG key is at  if
you want to encrypt the password.

-- 
Russ Allbery ([EMAIL PROTECTED]) 


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#309553: Problem in cups, not xpdf

[Marius Kotsbak]

Package: xpdf-reader
Version: 3.00-13
Followup-For: Bug #309553

This file actually prints correctly using lpr, but fails using cups with
any pdf viewers, so you can close this bug, and I open a new one in
cupsys.

-- System Information:
Debian Release: 3.1
  APT prefers testing
  APT policy: (500, 'testing')
Architecture: i386 (i686)
Kernel: Linux 2.4.26-1-k7
Locale: LANG=no_NO, LC_CTYPE=no_NO (charmap=ISO-8859-1)

Versions of packages xpdf depends on:
ii  xpdf-common   3.00-13Portable Document Format (PDF) sui
ii  xpdf-reader   3.00-13Portable Document Format (PDF) sui
ii  xpdf-utils3.00-13Portable Document Format (PDF) sui

Versions of packages xpdf-reader depends on:
ii  gsfonts  8.14+v8.11+urw-0.2  Fonts for the Ghostscript interpre
ii  lesstif2 1:0.93.94-11.2  OSF/Motif 2.1 implementation relea
ii  libc62.3.2.ds1-21GNU C Library: Shared libraries an
ii  libfreetype6 2.1.7-2.4   FreeType 2 font engine, shared lib
ii  libgcc1  1:3.4.3-12  GCC support library
ii  libice6  4.3.0.dfsg.1-12.0.1 Inter-Client Exchange library
ii  libpaper11.1.14-3Library for handling paper charact
ii  libsm6   4.3.0.dfsg.1-12.0.1 X Window System Session Management
ii  libstdc++5   1:3.3.5-12  The GNU Standard C++ Library v3
ii  libt1-5  5.0.2-3 Type 1 font rasterizer library - r
ii  libx11-6 4.3.0.dfsg.1-12.0.1 X Window System protocol client li
ii  libxext6 4.3.0.dfsg.1-12.0.1 X Window System miscellaneous exte
ii  libxp6   4.3.0.dfsg.1-12.0.1 X Window System printing extension
ii  libxpm4  4.3.0.dfsg.1-12.0.1 X pixmap library
ii  libxt6   4.3.0.dfsg.1-12.0.1 X Toolkit Intrinsics
ii  xlibs4.3.0.dfsg.1-12 X Keyboard Extension (XKB) configu
ii  xpdf-common  3.00-13 Portable Document Format (PDF) sui
ii  zlib1g   1:1.2.2-4   compression library - runtime

-- no debconf information


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#308859: centericq-utf8: Sound settings not saved after changing

[Thomas Skora]

Julien Lemoine <[EMAIL PROTECTED]> writes:

Hello Julien!

> The sound is delegated to the utility /usr/bin/play, if you want
> another tool, you can edit the file (this is
> why upstream author set "don't change" by default, to avoid overwrite
> of user defined parameters)

This was the solution. After a "apt-get dist-upgrade" my 'play'
disappeared. Now I use 'aplay' from alsa.

Thomas


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#148513: Get rid of premature orgasms

[Doreen]

Don't let it go down! Get THE fix.
http://ksMox.da9.net/p/sevy/wisdom.htm

Doreen


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#80878: eSecure Online Pharmacies

[Judith]

Top 10 popular pharmacy drugs
http://usyt.6lrhs7ozlyoeap6.luxfcadh.com

--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#59518: Same Medication - Low Price

[Silvester]

eDrugs Online
http://cgqzvi.1g4c521cgbj9nkj.haetndhaet9.com

--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#145280: eSecure Online Pharmacies

[Sidney]

eBay Pharmacy
http://gvi.b8w4xubmq3tjfct.sophbisoph8.com

--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#309841: kernel-headers-2.6.11-1-k7 symlinks

[Signey John]

Package: kernel-headers-2.6.11-1-k7
Version: 2.6.11-3


no files, all symlinks...


Signey John


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#309842: request-tracker3.4: bad dependencies - insists on installing apache 1.x.x packages

[Mike Edwards]

Package: request-tracker3.4
Version: 3.4.2-4
Severity: normal


Despite having apache2 installed, request-tracker3.4 insists on installing
apache-common and libapache-mod-perl.


-- Package-specific info:
Changed files:
  etc/request-tracker3.4/RT_SiteConfig.pm

-- System Information:
Debian Release: 3.1
  APT prefers unstable
  APT policy: (500, 'unstable'), (500, 'testing')
Architecture: i386 (i686)
Kernel: Linux 2.4.27-2-686-smp
Locale: LANG=en_US, LC_CTYPE=en_US (charmap=ISO-8859-1)

Versions of packages request-tracker3.4 depends on:
ii  apache2-mpm-prefork [apache2 2.0.54-4traditional model for Apache2
ii  libapache-dbi-perl   0.94-2  Connect apache server to database 
ii  libapache-session-perl   1.60-2  Perl modules for keeping persisten
ii  libapache2-mod-fastcgi   2.4.2-6 FastCGI module for Apache2
ii  libcache-cache-perl  1.04-1  Managed caches of persistent infor
ii  libcache-simple-timedexpiry- 0.21-1  Perl module to cache and expire ke
ii  libclass-returnvalue-perl0.52-1  A return-value object that lets yo
ii  libdbd-pg-perl   1.41-1  a PostgreSQL interface for Perl 5 
ii  libdbi-perl  1.46-6  Perl5 database interface by Tim Bu
ii  libdbix-searchbuilder-perl   1.26-1  Encapsulate SQL queries and rows i
ii  libexception-class-perl  1.20-1  a module that allows you to declar
ii  libfcgi-perl 0.67-1  FastCGI Perl module
ii  libfreezethaw-perl   0.43-2  converting Perl structures to stri
ii  libhtml-mason-perl   1:1.26-1HTML::Mason Perl module
ii  libhtml-parser-perl  3.44-1  A collection of modules that parse
ii  libhtml-scrubber-perl0.08-1  Perl extension for scrubbing/sanit
ii  liblocale-maketext-fuzzy-per 0.02-1  Maketext from already interpolated
ii  liblocale-maketext-lexicon-p 0.49-1  Lexicon-handling backends for "Loc
ii  liblog-dispatch-perl 2.10-1  Dispatches messages to multiple Lo
ii  libmailtools-perl1.62-1  Manipulate email in perl programs
ii  libmime-perl 5.417-1 Perl5 modules for MIME-compliant m
ii  libmldbm-perl2.01-1  Store multidimensional hash struct
ii  libmodule-versions-report-pe 1.02-1  Report versions of all modules in 
ii  libparams-validate-perl  0.76-1  validate parameters to Perl method
ii  libregexp-common-perl2.120-1 Provide commonly requested regular
ii  libterm-readkey-perl 2.21-1.3A perl module for simple terminal 
ii  libtest-inline-perl  0.16-1  Embed tests and code examples in P
ii  libtext-autoformat-perl  1.12-3  Perl module for automatic text wra
ii  libtext-quoted-perl  1.8-1   Extract the structure of a quoted 
ii  libtext-template-perl1.44-1.1Text::Template perl module
ii  libtext-wrapper-perl 1.000-2 Simple word wrapping routine
ii  libtime-modules-perl 2003.1126-2 Various Perl modules for time/date
ii  libtree-simple-perl  1.14-1  A simple tree object
ii  libxml-rss-perl  1.05-1  Perl module for managing RSS (RDF 
pn  libxml-simple-perl   Not found.
ii  perl 5.8.4-8 Larry Wall's Practical Extraction 
ii  qmail [mail-transport-agent] 1.03-24 Secure, reliable, efficient, simpl
ii  rt3.4-clients3.4.2-4 Mail gateway and command-line inte
ii  sysklogd [system-log-daemon] 1.4.1-16System Logging Daemon

-- no debconf information


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#309843: [FTBFS]: makelist: Permission denied

[Christian T. Steigies]

Package: libedit
Severity: serious
Justification: FTBFS

Automatic build of libedit_2.9.cvs.20050518-1 on tanda by sbuild/m68k 33
[...]
dh_testdir
cd libedit-20050518 && pmake MKPROFILE=no MKCATPAGES=no MLINKS= MANPAGES= 
SHLIB_SHFLAGS="-Wl,-soname,libedit.so.2" LDADD="*.so -lcurses"
/build/buildd/libedit-2.9.cvs.20050518/libedit-20050518/makelist -h 
/build/buildd/libedit-2.9.cvs.20050518/libedit-20050518/vi.c  > vi.h.tmp &&  mv 
vi.h.tmp vi.h
/bin/sh: /build/buildd/libedit-2.9.cvs.20050518/libedit-20050518/makelist: 
Permission denied
*** Error code 1

See
http://buildd.debian.org/build.php?arch=&pkg=libedit&vers=2.9.cvs.20050518-1

The package failed to build on all arches, because makelist is not
executable. In case you added it in your debian patch, and it was executable
on your system, you have to make it executable in debian/rules, since the
debian patch does not preserve file permissions.

Christian


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#309844: libocamlgsl-ocaml-dev: package should depend on libgsl0-dev

[Remi Vanicat]

Package: libocamlgsl-ocaml-dev
Version: 0.3.5-2
Severity: grave

there seem to be a missing dependency, making compilation failed when
linking: 
$ cat test.ml
let _ =
 Gsl_error.init () ;
 Gsl_rng.env_setup ()
$ LANG=C ocamlopt -I +gsl bigarray.cmxa gsl.cmxa test.ml
/usr/bin/ld: cannot find -lgsl
collect2: ld returned 1 exit status
Error during linking

and after "aptitude install libgsl0-dev"

$ LANG=C ocamlopt -I +gsl bigarray.cmxa gsl.cmxa test.ml
$

I could try to write a fix and upload it this week end if you want,
but don't count on it.

-- System Information:
Debian Release: 3.1
  APT prefers unstable
  APT policy: (500, 'unstable'), (500, 'testing'), (1, 'experimental')
Architecture: i386 (i686)
Shell:  /bin/sh linked to /bin/bash
Kernel: Linux 2.6.10-1-k7
Locale: [EMAIL PROTECTED], [EMAIL PROTECTED] (charmap=ISO-8859-15)

Versions of packages libocamlgsl-ocaml-dev depends on:
ii  libocamlgsl-ocaml 0.3.5-2GNU scientific library for OCaml
ii  ocaml-nox [ocaml-nox-3.08.3]  3.08.3-3   ML language implementation with a 

-- no debconf information

-- 
Rémi Vanicat

Bug#155752: Drug Store

[Laura]

Drug Store
http://tqmvq.nkqg96ny2x5vr6n.bozomkbozo2.com

--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#292337: Processed: Prep for removal of doc++ from sarge

[Roger Leigh]

-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1

Junichi Uekawa <[EMAIL PROTECTED]> writes:

> bug 292337 is fixed, and there is no RC bug pending for doc++.
> Is there any reason you want to remove doc++ now?

Sorry, I wasn't aware it had been fixed when I changed the severities.
I was ensuring that all affected packages were set the same.

However... doc++ is still abandoned upstream, so I would recommend
converting to Doxygen as soon as possible.  If it's no longer
maintained, we should remove it at the earliest opportunity IMHO.


Regards,
Roger

- -- 
Roger Leigh
Printing on GNU/Linux?  http://gimp-print.sourceforge.net/
Debian GNU/Linuxhttp://www.debian.org/
GPG Public Key: 0x25BFB848.  Please sign and encrypt your mail.
-BEGIN PGP SIGNATURE-
Version: GnuPG v1.4.1 (GNU/Linux)
Comment: Processed by Mailcrypt 3.5.8 

iD8DBQFCjRNXVcFcaSW/uEgRAqGRAKDNuofozBjFymlpgnsAGPW0cr5RdQCgtfCc
t61qqZXOYEZHeX3FK4/GJW0=
=lLh7
-END PGP SIGNATURE-


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#306781: more info?

[martin f krafft]

tags 306781 + moreinfo unreproducible
thanks

Please provide more information about the problem. Specifically,
which shell provides /bin/sh?

Thanks,

-- 
 .''`. martin f. krafft <[EMAIL PROTECTED]>
: :'  :proud Debian developer, admin, user, and author
`. `'`
  `-  Debian - when you have better things to do than fixing a system
 
Invalid/expired PGP subkeys? Use subkeys.pgp.net as keyserver!
 
"even a stopped clock gives the right time twice a day."
-- orbital


signature.asc
Description: Digital signature

Bug#309072: Where/how to get help/file a bug? azureus won't start with jdk-1_5_0_03-linux-amd64.bin packaged by java-package 0.24 was: Bug#309072

[gerhard]

Am Donnerstag 19 Mai 2005 22:24 schrieb Shaun Jackman:
> On 5/19/05, gerhard <[EMAIL PROTECTED]> wrote:
> > But it works out of the box with my normal debian java-package
> > build sun-java installation! Yeah! Finally! :-).
>
> Congrats!
>
> > So I assume, that there are some (maybe swt gtk java) classes in
> > the debian system, that either doesn't work with azureus or that
> > are not in the searchpath. Maybe the azureus script of the deb is
> > broken.
>
> It could be that libswt-gtk-3.1-jni is broken for AMD64. You could
> help test this theory by running the utility swingwtdemo in the
> package swingwt-demo. If it crashes too, that would pretty much
> confirm it. Good guess!
>
> Cheers,
> Shaun

Hello Shaun,

keep in mind, that I'm more a designer than a programmer. 

$ swingwtdemo
libgcj failure: Duplicate class registration: 
java.awt.peer.ComponentPeer
Abgebrochen
But interesting too, is (Unfortunately , like in most cases, I post the 
whole bunch, because I dont' know the important part):
$ LANG=en sudo apt-get install swingwt-demo libgcj5-common
Reading package lists... Done
Building dependency tree... Done
The following extra packages will be installed:
  libgcj-common libgcj4 libgcj5 libswingwt0 libswt-gtk3 libswt-gtk3-jni
The following NEW packages will be installed:
  libgcj-common libgcj4 libgcj5 libgcj5-common libswingwt0 libswt-gtk3
  libswt-gtk3-jni swingwt-demo
>| What's that? Wasn't that already installed?
0 upgraded, 8 newly installed, 0 to remove and 5 not upgraded.
Need to get 8002kB/10.9MB of archives.
After unpacking 44.7MB of additional disk space will be used.
Do you want to continue [Y/n]? y
WARNING: The following packages cannot be authenticated!
  libgcj5 libgcj5-common libswt-gtk3-jni libswt-gtk3 libswingwt0 
swingwt-demo
Install these packages without verification [y/N]? y
Media change: please insert the disc labeled
 'Ubuntu 5.04 _Hoary Hedgehog_ - Release amd64 (20050407)'
in the drive '/cdrom/' and press enter

Get:1 http://archive.ubuntu.com hoary/universe libgcj5 3.4.3-9ubuntu4 
[3916kB]
Get:2 http://archive.ubuntu.com hoary/universe libgcj5-common 
3.4.3-9ubuntu4 [2018kB]
Get:3 http://archive.ubuntu.com hoary/universe libswt-gtk3-jni 3.0-6 
[152kB]
Get:4 http://archive.ubuntu.com hoary/universe libswt-gtk3 3.0-6 
[1092kB]
Get:5 http://archive.ubuntu.com hoary/universe libswingwt0 0.85.1-1 
[773kB]
Get:6 http://archive.ubuntu.com hoary/universe swingwt-demo 0.85.1-1 
[51.9kB]
Fetched 8002kB in 26m22s (5057B/s)
Reading package fields... Done
Reading package status... Done
Retrieving bug reports... Done
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = "de_DE:de:en_GB:en",
LC_ALL = (unset),
LC_MESSAGES = "en_GB.UTF-8",
LANG = "en"
are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
locale: Cannot set LC_CTYPE to default locale: No such file or directory
locale: Cannot set LC_ALL to default locale: Datei oder Verzeichnis 
nicht gefunden

Preconfiguring packages ...
Selecting previously deselected package libgcj-common.
(Reading database ... 222975 files and directories currently installed.)
Unpacking libgcj-common 
(from .../libgcj-common_4.0-0pre6ubuntu7_all.deb) ...
Selecting previously deselected package libgcj4.
Unpacking libgcj4 (from .../libgcj4_3.3.5-8ubuntu2_amd64.deb) ...
Selecting previously deselected package libgcj5.
Unpacking libgcj5 (from .../libgcj5_3.4.3-9ubuntu4_amd64.deb) ...
Selecting previously deselected package libgcj5-common.
Unpacking libgcj5-common 
(from .../libgcj5-common_3.4.3-9ubuntu4_all.deb) ...
Selecting previously deselected package libswt-gtk3-jni.
Unpacking libswt-gtk3-jni (from .../libswt-gtk3-jni_3.0-6_amd64.deb) ...
Selecting previously deselected package libswt-gtk3.
Unpacking libswt-gtk3 (from .../libswt-gtk3_3.0-6_amd64.deb) ...
Selecting previously deselected package libswingwt0.
Unpacking libswingwt0 (from .../libswingwt0_0.85.1-1_amd64.deb) ...
Selecting previously deselected package swingwt-demo.
Unpacking swingwt-demo (from .../swingwt-demo_0.85.1-1_amd64.deb) ...
Setting up libgcj-common (4.0-0pre6ubuntu7) ...
Setting up libgcj4 (3.3.5-8ubuntu2) ...
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = "de_DE:de:en_GB:en",
LC_ALL = (unset),
LC_MESSAGES = "en_GB.UTF-8",
LANG = "en"
are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = "de_DE:de:en_GB:en",
LC_ALL = (unset),
LC_MESSAGES = "en_GB.UTF-8",
LANG = "en"
are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").

Setting up libgcj5 (3.4.3-9ubuntu4) ...

Setting up libgcj5-common (3.4.3-9ubuntu4) ...
Setting u

Bug#309723: Packages available

[Roberto C. Sanchez]

I have pacakges for this ITP available here:

deb http://familiasanchez.net/~sanchezr/debian/ sarge main
deb-src http://familiasanchez.net/~sanchezr/debian/ sarge main

I am awaiting sponsorship of this package or completion of the process
to become
a new DD.

-Roberto

-- 
Roberto C. Sanchez
http://familiasanchez.net/~sanchezr


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#309255: nagios-plugins: check_ping segfaults if used for IPv6

[Christoph Biedl]

Christoph Biedl wrote...

> The actual magic should reside in the configure script.
> The current (and broken) output is:
> | checking for ICMP ping syntax... /bin/ping -n -U -w %d -c %d %s
> | checking for ICMPv6 ping syntax... /bin/ping6 -n -U -c %d %s

Sorry to bother you again but I'd really like to see that fixed in
sarge. The patch attached adds the test clause in configure, stolen from
the IPv4 counterpart. Works for me.

Christoph
--- OLD/configure   2005-05-17 23:16:21.0 +0200
+++ NEW/configure   2005-05-19 23:50:39.0 +0200
@@ -14385,6 +14385,13 @@
ac_cv_ping6_packets_first=yes
echo "$as_me:$LINENO: result: $with_ping6_command" >&5
 echo "${ECHO_T}$with_ping6_command" >&6
+   elif $PATH_TO_PING6 -n -U -w 10 -c 1 ::1 2>/dev/null |
+   egrep -i "^round-trip|^rtt" >/dev/null
+   then
+   with_ping6_command="$PATH_TO_PING6 -n -U -w %d -c %d %s"
+   ac_cv_ping6_packets_first=yes
+   echo "$as_me:$LINENO: result: $with_ping6_command" >&5
+echo "${ECHO_T}$with_ping6_command" >&6
 
elif $PATH_TO_PING6 -n -U -c 1 ::1 2>/dev/null | \
egrep -i "^round-trip|^rtt" >/dev/null

Bug#292337: Processed: Prep for removal of doc++ from sarge

[Junichi Uekawa]

Hi,

bug 292337 is fixed, and there is no RC bug pending for doc++.
Is there any reason you want to remove doc++ now?
regards,
junichi


At Thu, 19 May 2005 13:18:08 -0700,
Debian Bug Tracking System wrote:
> 
> Processing commands for [EMAIL PROTECTED]:
> 
> > severity 307559 important
> Bug#307559: dlisp: Build-Depends on obsolete doc++
> Severity set to `important'.
> 
> > severity 307560 important
> Bug#307560: libdshconfig: Build-Depends on obsolete doc++
> Severity set to `important'.
> 
> > severity 307562 important
> Bug#307562: libupnp: Build-Depends on obsolete doc++
> Severity set to `important'.
> 
> > thanks
> Stopping processing here.
> 
> Please contact me if you need assistance.
> 
> Debian bug tracking system administrator
> (administrator, Debian Bugs database)
> 


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#309839: gnumeric: insertion of chart failed

[Remi Vanicat]

Package: gnumeric
Version: 1.5.1-1
Severity: normal

When I click on the "insert a chart" icon, gnumeric complain that 
it can't open the file 
/local/gnome/head/test/share/goffice/0.0.1/glade/gog-guru.glade

recompiling the gnumeric package solve the problem.

-- System Information:
Debian Release: 3.1
  APT prefers unstable
  APT policy: (500, 'unstable'), (500, 'testing'), (1, 'experimental')
Architecture: i386 (i686)
Shell:  /bin/sh linked to /bin/bash
Kernel: Linux 2.6.10-1-k7
Locale: [EMAIL PROTECTED], [EMAIL PROTECTED] (charmap=ISO-8859-15)

Versions of packages gnumeric depends on:
ii  gconf22.8.1-6GNOME configuration database syste
ii  gnumeric-common   1.5.1-1common files for Gnumeric, the GNO
ii  gsfonts   8.14+v8.11+urw-0.2 Fonts for the Ghostscript interpre
ii  libart-2.0-2  2.3.17-1   Library of functions for 2D graphi
ii  libatk1.0-0   1.8.0-4The ATK accessibility toolkit
ii  libbonobo2-0  2.8.1-2Bonobo CORBA interfaces library
ii  libbonoboui2-02.8.1-2The Bonobo UI library
ii  libc6 2.3.2.ds1-22   GNU C Library: Shared libraries an
ii  libgconf2-4   2.8.1-6GNOME configuration database syste
ii  libglade2-0   1:2.4.2-2  library to load .glade files at ru
ii  libglib2.0-0  2.6.4-1The GLib library of C routines
ii  libgnome2-0   2.8.1-2The GNOME 2 library - runtime file
ii  libgnomecanvas2-0 2.8.0-1A powerful object-oriented display
ii  libgnomeprint2.2-02.8.2-1The GNOME 2.2 print architecture -
ii  libgnomeprintui2.2-0  2.8.2-2GNOME 2.2 print architecture User 
ii  libgnomeui-0  2.8.1-3The GNOME 2 libraries (User Interf
ii  libgnomevfs2-02.8.4-4The GNOME virtual file-system libr
ii  libgoffice-1  0.0.1-1Document centric objects library -
ii  libgsf-1  1.12.0-1   Structured File Library - runtime 
ii  libgsf-gnome-11.12.0-1   Structured File Library - runtime 
ii  libgtk2.0-0   2.6.4-3The GTK+ graphical user interface 
ii  libice6   4.3.0.dfsg.1-13Inter-Client Exchange library
ii  liborbit2 1:2.12.2-1 libraries for ORBit2 - a CORBA ORB
ii  libpango1.0-0 1.8.1-1Layout and rendering of internatio
ii  libpopt0  1.7-5  lib for parsing cmdline parameters
ii  libsm64.3.0.dfsg.1-13X Window System Session Management
ii  libxml2   2.6.16-7   GNOME XML library
ii  xlibs 4.3.0.dfsg.1-13X Keyboard Extension (XKB) configu
ii  zlib1g1:1.2.2-4  compression library - runtime

-- no debconf information

-- 
Rémi Vanicat

Bug#309840: Installation Reports

[Michel van der Klei]

Package: installation-reports

Debian-installer-version: 
http://cdimage.debian.org/pub/cdimage-testing/daily/
uname -a:morovigian:~# uname -a
Linux morovigian 2.4.27-2-686 #1 Thu Jan 20 11:10:41 JST 2005 i686 GNU/Linux
Date: May 20st
Method: Network install

Machine: Dell Dimension SPX
Processor: Pentium 4 3.0 Ghz
Memory: 1024 mb
Root Device: SATA
Root Size/partition table: morovigian:~# fdisk /dev/hda -l

Disk /dev/hda: 160.0 GB, 1600 bytes
255 heads, 63 sectors/track, 19452 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

   Device Boot  Start End  Blocks   Id  System
/dev/hda1   1 261 2096451   de  Dell Utility
/dev/hda2   * 262   13009   1023983107  HPFS/NTFS
/dev/hda3   13010   13021   96390   83  Linux
/dev/hda4   13022   1945251657007+   5  Extended
/dev/hda5   13022   13203 1461883+  83  Linux
/dev/hda6   13204   13811 4883728+  83  Linux
/dev/hda7   13812   14054 1951866   83  Linux
/dev/hda8   14055   14176  979933+  82  Linux swap / Solaris
/dev/hda9   14177   1945242379438+  83  Linux

Output of lspci and lspci -n:

morovigian:~# lspci
:00:00.0 Host bridge: Intel Corp. 925X Memory Controller Hub (rev 04)
:00:01.0 PCI bridge: Intel Corp. 925X PCI Express Root Port (rev 04)
:00:1c.0 PCI bridge: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI 
Express Port 1 (rev 03)
:00:1c.1 PCI bridge: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI 
Express Port 2 (rev 03)
:00:1d.0 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) 
USB UHCI #1 (rev 03)
:00:1d.1 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) 
USB UHCI #2 (rev 03)
:00:1d.2 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) 
USB UHCI #3 (rev 03)
:00:1d.3 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) 
USB UHCI #4 (rev 03)
:00:1d.7 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) 
USB2 EHCI Controller (rev 03)
:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev d3)
:00:1f.0 ISA bridge: Intel Corp. 82801FB/FR (ICH6/ICH6R) LPC Interface 
Bridge (rev 03)
:00:1f.2 IDE interface: Intel Corp. 82801FR/FRW (ICH6R/ICH6RW) SATA 
Controller (rev 03)
:00:1f.3 SMBus: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus 
Controller (rev 03)
:01:00.0 VGA compatible controller: nVidia Corporation: Unknown device 00c1 
(rev a2)
:02:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5751 
Gigabit Ethernet PCI Express (rev 01)
:04:00.0 Multimedia audio controller: Creative Labs SB Audigy LS
:04:07.0 FireWire (IEEE 1394): Texas Instruments TSB43AB23 IEEE-1394a-2000 
Controller (PHY/Link)

morovigian:~# lspci -n |sort
:00:00.0 0600: 8086:2584 (rev 04)
:00:01.0 0604: 8086:2585 (rev 04)
:00:1c.0 0604: 8086:2660 (rev 03)
:00:1c.1 0604: 8086:2662 (rev 03)
:00:1d.0 0c03: 8086:2658 (rev 03)
:00:1d.1 0c03: 8086:2659 (rev 03)
:00:1d.2 0c03: 8086:265a (rev 03)
:00:1d.3 0c03: 8086:265b (rev 03)
:00:1d.7 0c03: 8086:265c (rev 03)
:00:1e.0 0604: 8086:244e (rev d3)
:00:1f.0 0601: 8086:2640 (rev 03)
:00:1f.2 0101: 8086:2652 (rev 03)
:00:1f.3 0c05: 8086:266a (rev 03)
:01:00.0 0300: 10de:00c1 (rev a2)
:02:00.0 0200: 14e4:1677 (rev 01)
:04:00.0 0401: 1102:0007
:04:07.0 0c00: 104c:8024

Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] =
didn't try it

Initial boot worked:[O]
Configure network HW:   [O] 
Config network: [O]
Detect CD:  [O]
Load installer modules: [0] 
Detect hard drives: [O]
Partition hard drives:  [0]
Create file systems:[O]
Mount partitions:   [0]
Install base system:[0]
Install boot loader:[0]
Reboot: [0]

Comments/Problems:

No Problems found .. 

Greetz,

Michel van der Klei







-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#309710: kdenetwork: uninstallable on sparc in sarge/sid

[Riku Voipio]

On Wed, May 18, 2005 at 05:04:02PM -0700, Blars Blarson wrote:
> This is the usual arch all/any mismatch, but this has been propigated
> into testing.  The sparc build appears to have succeeded on May 14,
> but has not yet been uploaded.  It also built fine on my sparc
> pbuilder.

There is not much we (as in kde maintainers) can do about that. Why
kdenetwork has been built three times successfully[1] On sparc, yet
never uploaded remains a mystery. As a debian developer and sparc user
, you could test and upload, but AFAIK buildd admins prefer people
would not do that. 

[1] 
http://buildd.debian.org/build.php?&pkg=kdenetwork&ver=4%3A3.3.2-3&arch=sparc&file=log




-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#309837: hmake: New upstream available

[Aaron Denney]

Package: hmake
Version: 3.09-3
Severity: normal

ghc has changed how it presents information on packages, as of 6.4.  This 
version
of hmake doesn't understand it, but the upstream 3.10 does.


-- System Information:
Debian Release: 3.1
  APT prefers unstable
  APT policy: (500, 'unstable'), (1, 'experimental')
Architecture: i386 (i686)
Shell:  /bin/sh linked to /bin/bash
Kernel: Linux 2.6.9
Locale: LANG=C, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)

Versions of packages hmake depends on:
ii  ghc66.4-3GHC - the Glasgow Haskell Compilat
ii  haskell-utils   1.6  Utilities used by the Debian Haske
ii  libc6   2.3.2.ds1-22 GNU C Library: Shared libraries an
ii  libgmp3 4.1.4-6  Multiprecision arithmetic library
ii  libncurses5 5.4-4Shared libraries for terminal hand
ii  libreadline55.0-10   GNU readline and history libraries
ii  nhc98   1.16-15  aNother Haskell Compiler (the nhc9

-- no debconf information


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#309836: samba: MacOSX Tiger cannot connect

[Roman Himmes]

Package: samba
Version: 3.0.14a-1
Severity: important


MacOSX Tiger cannot connect from the Finder to a Debian Testing Samba
installation. The log files show following messages:

rpc_parse/parse_prs.c:prs_mem_get(537)
prs_mem_get: reading data of size 2 would overrun buffer.
rpc_server/srv_pipe.c:api_pipe_bind_req(919)
api_pipe_bind_req: unable to marshall RPC_HDR_RD struct.

Some other mac users have the same problem which have discussed it in
this forum unfortunatly in german:
http://www.macuser.de/forum/showthread.php?t=89869

They claim that with the options
encrypt passwords = true
and
security = user
they can mount shares ob the shell. But I could not, even with the
changes.



-- System Information:
Debian Release: 3.1
  APT prefers testing
  APT policy: (500, 'testing')
Architecture: i386 (i586)
Kernel: Linux 2.6.8-2-386
Locale: [EMAIL PROTECTED], [EMAIL PROTECTED] (charmap=ISO-8859-15)

Versions of packages samba depends on:
ii  debconf [debconf-2.0]   1.4.30.13Debian configuration management sy
ii  libacl1 2.2.23-1 Access control list shared library
ii  libattr12.4.16-1 Extended attribute shared library
ii  libc6   2.3.2.ds1-21 GNU C Library: Shared libraries an
ii  libcomerr2  1.37-2   common error description library
ii  libcupsys2-gnutls10 1.1.23-10Common UNIX Printing System(tm) - 
ii  libkrb531.3.6-2  MIT Kerberos runtime libraries
ii  libldap22.1.30-6 OpenLDAP libraries
ii  libpam-modules  0.76-22  Pluggable Authentication Modules f
ii  libpam-runtime  0.76-22  Runtime support for the PAM librar
ii  libpam0g0.76-22  Pluggable Authentication Modules l
ii  libpopt01.7-5lib for parsing cmdline parameters
ii  logrotate   3.7-2Log rotation utility
ii  netbase 4.21 Basic TCP/IP networking system
ii  samba-common3.0.14a-1Samba common files used by both th

-- debconf information:
  samba/nmbd_from_inetd:
* samba/run_mode: daemons
* samba/log_files_moved:
* samba/tdbsam: true
* samba/generate_smbpasswd: false



-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#309835: RM: linuxsms -- RoM; no upstream activity; NPOASR

[Santiago Garcia Mantinan]

Package: ftp.debian.org
Severity: normal



-- System Information:
Debian Release: 3.1
  APT prefers unstable
  APT policy: (500, 'unstable')
Architecture: i386 (i686)
Shell:  /bin/sh linked to /bin/bash
Kernel: Linux 2.6.12-rc4
Locale: [EMAIL PROTECTED], [EMAIL PROTECTED] (charmap=ISO-8859-15)


signature.asc
Description: Digital signature

Bug#196177: Mktime, -1and PHP && mktime mishandles dates before 1970

[Anthony Awtrey]

This bug is still a problem in 2005 with Sarge frozen...

$ php4 -r 'echo date("F j, Y", mktime(0,0,0,05,01,1950)) . "\n";'
December 31, 1969

Bug 220006 should also be merged with this one:

http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=196177

Sigh... Would someone post what the hold-up is to one of these bugs? It
seems silly to have a bug like this open for so long without some kind
of justification for why it is being kept open. Especially since the guy
who posted bug 196177 even included a test program to illustrate the bug
and a link to exactly where the problem occured in the gnulib cvs.

Tony


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#309838: gcompris: missing dependency on python2.3-gnome2

[Yann Dirson]

Package: gcompris
Version: 6.5.2-3
Severity: serious
Tags: patch

None of the boards written in python work without python-gnome.  Only
this dependency is missing.


-- System Information:
Debian Release: 3.1
  APT prefers testing
  APT policy: (990, 'testing'), (500, 'unstable'), (90, 'experimental')
Architecture: i386 (i686)
Kernel: Linux 2.4.27-smp
Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968)

Versions of packages gcompris depends on:
ii  gcompris-data 6.5.2-3Data files for GCompris
ii  libart-2.0-2  2.3.17-1   Library of functions for 2D graphi
ii  libatk1.0-0   1.8.0-4The ATK accessibility toolkit
ii  libbonobo2-0  2.8.1-2Bonobo CORBA interfaces library
ii  libbonoboui2- 2.8.1-2The Bonobo UI library
ii  libc6 2.3.2.ds1-21   GNU C Library: Shared libraries an
ii  libgcompris-1 6.5.2-3Core gcompris functionality - shar
ii  libgconf2-4   2.8.1-6GNOME configuration database syste
ii  libglib2.0-0  2.6.4-1The GLib library of C routines
ii  libgnome2-0   2.8.1-2The GNOME 2 library - runtime file
ii  libgnomecanva 2.8.0-1A powerful object-oriented display
ii  libgnomeui-0  2.8.1-3The GNOME 2 libraries (User Interf
ii  libgnomevfs2- 2.8.4-3The GNOME virtual file-system libr
ii  libgtk2.0-0   2.6.4-1The GTK+ graphical user interface 
ii  libice6   4.3.0.dfsg.1-12.0.1Inter-Client Exchange library
ii  liborbit2 1:2.12.2-1 libraries for ORBit2 - a CORBA ORB
ii  libpango1.0-0 1.8.1-1Layout and rendering of internatio
ii  libpopt0  1.7-5  lib for parsing cmdline parameters
ii  libsdl-mixer1 1.2.6-1mixer library for Simple DirectMed
ii  libsdl1.2debi 1.2.7+1.2.8cvs20041007-4.1 Simple DirectMedia Layer
ii  libsm64.3.0.dfsg.1-12.0.1X Window System Session Management
ii  libxml2   2.6.16-7   GNOME XML library
ii  python2.3 2.3.5-3An interactive high-level object-o
ii  vorbis-tools  1.0.1-1.3  Several Ogg Vorbis Tools
ii  xlibs 4.3.0.dfsg.1-12X Keyboard Extension (XKB) configu
ii  zlib1g1:1.2.2-4  compression library - runtime

-- no debconf information


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#309822: hal: Firewire disk is not automatically pmounted anymore since 0.4.7-4

[Mourad De Clerck]

> I tried downgrading to 0.4.7-3, which made it work again. I tried to isolate 
> the change that made it break, and noticed that using 0.4.7-4 with the 
> /etc/udev/scripts/device-removable.sh from 0.4.7-3 made it work again.

Disregard the comment about the device-removable.sh script. I believed
it worked again by replacing the file, but I've been unable to confirm
this again later on. Downgrading definately works though.


-- M





-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#307332: azureus: Azureus should call update-desktop-database in postinst/postrm

[Sam Morris]

Shaun Jackman wrote:
> Which desktop environments use update-desktop-database?
> Experimentation shows that KDE does not. update-desktop-database does
> not have a man page (bug: #284831)  so I'm not sure what this utility
> actually accomplishes.
Basically, it indexes the MimeType information from 
$XDG_DATA_DIRS/applications/*.desktop into 
$XDG_DATA_DIRS/applications/mimeinfo.cache.

The freedesktop.org Desktop Entry Specification[0] has more info at 


I assume that anything implementing the Desktop Entry Spec requires, or 
will require in the future, the use of the mimeinfo.cache file. In 
Sarge, this includes Gnome 2.8. On my system, Gnome didn't know that 
Azureus could open application/x-bittorrent files until I ran 
update-desktop-database, hence the bug report. ;)

XFCE 4 and Rox also use the spec, though I don't know if they use 
mimeinfo.cache. I actually though that KDE 3.3 used it; perhaps its 
implementation was incomplete until KDE 3.4 (or later? I haven't used 
KDE for a while so I'm not up to speed on such things).

> Cheers,
> Shaun
--
Sam Morris
http://robots.org.uk/
PGP key id 5EA01078
3412 EA18 1277 354B 991B  C869 B219 7FDB 5EA0 1078.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#308831: Warning: ldap_modify(): Modify: Invalid syntax ...

[Roland Gruber]

Hi Uwe,

Uwe Steinmann schrieb:
> I copied samba.schema into /etc/ldap/schema, included the file
> in /etc/ldap/slapd.conf, set the loglevel to 256 and restarted
> slapd. The result is still the same.
> Here is the contents of the array $attr which is passed as the
> third parameter to the failing ldap_modify()
> 
> Array ( [objectClass] => Array ( [0] => posixAccount [1] =>
> shadowAccount [2] => inetOrgPerson [3] => sambaAccount ) [cn] => steinm
> [...] 
> And here ist the output of slapd from syslog:
> 
> May 19 21:17:28 localhost slapd[7399]: conn=1 op=2 ADD
> dn="uid=steinm,ou=People,dc=steinmann,dc=cx"
> May 19 21:17:28 localhost slapd[7399]: conn=1 op=2 RESULT tag=105 err=21
> text=objectClass: value #3 invalid per syntax

looks like you selected to use the Samba 2 schema in your LAM
configuration (because of sambaAccount instead of sambaSamAccount).
If you just copied the file from the Samba sources then all Samba 2
parts are commented. You have to remove the comments or select the Samba
3 schema in your LAM configuration.


Concerning your other mail:

It is impossible for LAM to depend on Samba or install the schema file
with the package. The first reason is that LAM does not depend on a
local installation of OpenLDAP, you can have your server anywhere in the
network. The other reason is that you might use some other
implementation (e.g. Novell eDirectory).

The package description tells you that the Samba schema is used and
there is also a note in the Readme.Debian.


Greetings,
Roland


signature.asc
Description: OpenPGP digital signature

Bug#309833: ITA: twig -- The Web Information Gateway

[Jose Carlos Medeiros]

Package: wnpp
Severity: wishlist

retitle ITA: twig -- The Web Information Gateway

thanks

I will adopt twig package.

Bug#309832: liferea: Liferea 0.9.2 Update Available

[Nathan Conrad]

Package: liferea
Version: 0.9.1-1
Severity: wishlist

Hi,

Liferea 0.9.2 was released on Monday. Please upload 0.9.2 to
Debian. It fixes a number of bugs that existed in 0.9.1.

It is my opinion that the following bugs do not exist in 0.9.2.

#302102: liferea: Crash when selecting unread item from the unread vfolder 
#302155: liferea: Segfaults
#302058: liferea: crashes while navigating with space
The three of these were related to vfolders and the crashes should
not exist in 0.9.2
#281634: When killed, liferea loses some of its configuration
This was fixed a while ago.
#300452: liferea: exporting OPML kills the appllication
This was also fixed a while ago

-Nathan


-- System Information:
Debian Release: 3.1
  APT prefers unstable
  APT policy: (500, 'unstable'), (500, 'testing'), (1, 'experimental')
Architecture: i386 (i686)
Shell:  /bin/sh linked to /bin/bash
Kernel: Linux 2.6.11.8
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)

Versions of packages liferea depends on:
ii  libatk1.0-0  1.10.1-1The ATK accessibility toolkit
ii  libc62.3.2.ds1-22GNU C Library: Shared libraries an
ii  libgconf2-4  2.10.0-1GNOME configuration database syste
ii  libglib2.0-0 2.6.4-1 The GLib library of C routines
ii  libgtk2.0-0  2.6.7-1 The GTK+ graphical user interface 
ii  libice6  4.3.0.dfsg.1-13 Inter-Client Exchange library
ii  liborbit21:2.12.2-1  libraries for ORBit2 - a CORBA ORB
ii  libpango1.0-01.8.1-1 Layout and rendering of internatio
ii  libsm6   4.3.0.dfsg.1-13 X Window System Session Management
ii  libx11-6 4.3.0.dfsg.1-13 X Window System protocol client li
ii  libxml2  2.6.16-7GNOME XML library
ii  liferea-gtkhtml  0.9.1-1 gtkhtml-based rendering for Lifere
ii  xlibs4.3.0.dfsg.1-13 X Keyboard Extension (XKB) configu
ii  zlib1g   1:1.2.2-4   compression library - runtime

-- no debconf information


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#309831: very long window breaks enlightenment

[Julian T. J. Midgley]

Package: enlightenment
Version: 1:0.16.7.2-1
Severity: important

(For reasons as yet unknown) 'gtimer' was configured to use a window
height of 30672, by the following setting in .gtimer/gtimerrc:

win_height
30672

When gtimer was started up, it tried to create a window of that size.
The left hand enlightenment window border was missing, and the right
hand consisted of random black dots.  Enlightenment was unresponsive
thereafter (I couldn't move/resize any window, switch desktops, or
pull up the enlightenment menu by middle-clicking on the backdrop).
To recover, I had to restart XDM, losing data in windows on other
desktops.

The easiest way to reproduce this will probably be to install gtimer,
run it once, exit, then edit the .gtimer/gtimerrc file to set
win_height as above, and start gtimer again.

My X display is 1400x1050, in case this is relevant, and I run a 3x6
grid of virtual desktops.

See also Bug#309779 (related gtimer bug)


-- System Information:
Debian Release: 3.1
  APT prefers testing
  APT policy: (500, 'testing')
Architecture: i386 (i686)
Kernel: Linux 2.4.30-mh1
Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968) (ignored: LC_ALL set to C)

Versions of packages enlightenment depends on:
ii  enlightenment-data   1:0.16.7.2-1Enlightenment Window Manager Run T
ii  libaudiofile00.2.6-6 Open-source version of SGI's audio
ii  libc62.3.2.ds1-20GNU C Library: Shared libraries an
ii  libesd0  0.2.35-2Enlightened Sound Daemon - Shared 
ii  libice6  4.3.0.dfsg.1-12.0.1 Inter-Client Exchange library
ii  libimlib21.2.0-2.2   powerful image loading and renderi
ii  libsm6   4.3.0.dfsg.1-12.0.1 X Window System Session Management
ii  libx11-6 4.3.0.dfsg.1-12.0.1 X Window System protocol client li
ii  libxext6 4.3.0.dfsg.1-12.0.1 X Window System miscellaneous exte
ii  xlibs4.3.0.dfsg.1-12 X Keyboard Extension (XKB) configu

-- no debconf information


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]