Bug#397556: debian installer
Package: installation-reports Boot method: netinst beta 3 Image version: http://cdimage.debian.org/cdimage/etch_di_beta3/i386/iso-cd/debian-testing-i386-netinst.iso Date: November 7, 2006 Machine: Desktop (ASUS P5W DH Deluxe motherboard) Processor: Intel Core Duo Memory: 4Go Partitions: /, /var, /home and swap Output of lspci -nn and lspci -vnn: Attached Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot: [O] Detect network card:[O] Configure network: [O] Detect CD: [O] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Install base system:[O] Clock/timezone setup: [O] User/password setup:[O] Install tasks: [E] Install boot loader:[E] Overall install:[O] Comments/Problems: 1) The installation was done on a local network, using a local mirror. The access to the security updates mirror of course failed after a lon timeout: The installer should NOT try to access a distant host without explicitely asking for it. In some cases, it even completely breaks the installation process and the reboot is done without call to the tasksel step (which would correctly work without the security updates mirror). 2) Grub installation failed on this box. Lilo worked fine. Grub install finally succeeded after the reboot. 3) Configuration for a standard user should be skipable. 00:00.0 Host bridge [0600]: Intel Corporation 975X Express Memory Controller Hub [8086:277c] (rev c0) 00:01.0 PCI bridge [0604]: Intel Corporation 975X Express PCI Express Root Port [8086:277d] (rev c0) 00:1b.0 Audio device [0403]: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller [8086:27d8] (rev 01) 00:1c.0 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 [8086:27d0] (rev 01) 00:1c.3 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 4 [8086:27d6] (rev 01) 00:1c.4 PCI bridge [0604]: Intel Corporation 82801GR/GH/GHM (ICH7 Family) PCI Express Port 5 [8086:27e0] (rev 01) 00:1c.5 PCI bridge [0604]: Intel Corporation 82801GR/GH/GHM (ICH7 Family) PCI Express Port 6 [8086:27e2] (rev 01) 00:1d.0 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI #1 [8086:27c8] (rev 01) 00:1d.1 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI #2 [8086:27c9] (rev 01) 00:1d.2 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI #3 [8086:27ca] (rev 01) 00:1d.3 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI #4 [8086:27cb] (rev 01) 00:1d.7 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller [8086:27cc] (rev 01) 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev e1) 00:1f.0 ISA bridge [0601]: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge [8086:27b8] (rev 01) 00:1f.1 IDE interface [0101]: Intel Corporation 82801G (ICH7 Family) IDE Controller [8086:27df] (rev 01) 00:1f.2 IDE interface [0101]: Intel Corporation 82801GB/GR/GH (ICH7 Family) Serial ATA Storage Controller IDE [8086:27c0] (rev 01) 00:1f.3 SMBus [0c05]: Intel Corporation 82801G (ICH7 Family) SMBus Controller [8086:27da] (rev 01) 01:03.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link) [104c:8023] 02:00.0 IDE interface [0101]: JMicron Technologies, Inc. JMicron 20360/20363 AHCI Controller [197b:2363] (rev 02) 02:00.1 IDE interface [0101]: JMicron Technologies, Inc. JMicron 20360/20363 AHCI Controller [197b:2363] (rev 02) 03:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8053 PCI-E Gigabit Ethernet Controller [11ab:4362] (rev 20) 04:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8053 PCI-E Gigabit Ethernet Controller [11ab:4362] (rev 20) 06:00.0 VGA compatible controller [0300]: nVidia Corporation G70 [GeForce 7600 GT] [10de:0391] (rev a1) 00:00.0 Host bridge [0600]: Intel Corporation 975X Express Memory Controller Hub [8086:277c] (rev c0) Subsystem: ASUSTeK Computer Inc. Unknown device [1043:8178] Flags: bus master, fast devsel, latency 0 Capabilities: [e0] Vendor Specific Information 00:01.0 PCI bridge [0604]: Intel Corporation 975X Express PCI Express Root Port [8086:277d] (rev c0) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=06, subordinate=06, sec-latency=0 I/O behind bridge: c000-cfff Memory behind bridge: faa0-feaf Prefetchable memory behind bridge: cff0-efef Capabilities: [88] Subsystem: Intel Corporation Unknown device [8086:] Capabilities: [80] Power Management version 2 Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+ Capabilities: [a0] Express Root Port (Slot+) IRQ 0
Bug#387928: Problem located - on my system anyway
I have found the cause of the problem on my test install. (I realise there are other issues involved for other people). After the post install reboot, most of the system had modification times 10 hours in the future. This means the cache files were always outdated and were removed (at least until the clock caught up). Sorry for any inconvienience. Joel -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#397529: slib 3a4-3 broken under Scheme implemenations other than SCM
On Tue, 2006-11-07 at 15:12 -0800, Steve VanDevender wrote: There's really no way this can work in general. Even if it were to be written as something like (if ... (begin (define ...))) to make it valid Scheme, it would produce a definition local to the scope of the 'begin'. Yeah, I knew I was cheating. I didn't realize that it would break this badly. Moreover, this is an RC bug; I've upgraded it to serious. At least in the case of SCM, particular SCM versions are rather closely tied to corresponding SLIB versions (5e2 needs 3a3, 5e3 needs 3a4) partly because SLIB 'require' support is integrated into SCM. You may have noticed that Aubrey Jaffer has tended to release new versions of both SCM and SLIB simultaneously for some time now. Other Schemes should work with various SLIB versions. I agree with your suggestion here; I'll upload a fix. Thomas signature.asc Description: This is a digitally signed message part
Bug#395054: Puzzle: my reopening a closed bug results in closing BTS reply, reportedly from me.
On Fri, 3 Nov 2006 22:05:22 -0800 Don Armstrong [EMAIL PROTECTED] wrote: ...It's a question of how much logging and recording is enough, too much, or too little. I don't know if there's a general answer, but I know how to scratch where it itches... Again, the bug log keeps the original message, and the record of what it did when it parsed the message. The only thing that isn't kept is the output of parsing the entire message to control, because that can affect multiple bugs, and generally isn't terribly informative anyway. Pardon, I couldn't quite follow your second sentence above. Were you saying: That certain output is not publicly recorded because... 1) ...KEEPING it might affect multiple bugs. 2) ...it's prior effect can occasionally be difficult to automatically categorize. 3) ...something else? '1)' seems moot, since a web page copy of a sent email is not active code, and once stored affects nothing but our eyeballs. '2)' seems to support the opposite idea, since the larger the effect, the more interesting and record worthy its cause. As to whether a public html copy of a reopen confirmation email sent to the reopener is tremendously informative, I agree it's not. The data would only needed once in blue moon, but when needed could be a little bit useful. It's like a 'typo' bug. Most of the time nothing very bad happens if a typo remains, yet things are slightly better when it's fixed. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#396980: fixed in mlton 20061107-1
reopen 396980 thanks * new upstream version * Use max-heap 640m instead of fixed-heap 512m. hopefully closes: #396980 Unfortunately, the package still fails to build on powerpc with an error unrelated to the heap size failures on hppa and sparc. -- Steve Langasek Give me a lever long enough and a Free OS Debian Developer to set it on, and I can move the world. [EMAIL PROTECTED] http://www.debian.org/ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#397558: amphetamine: FTBFS: /usr/bin/ld: cannot find -lXt
Package: amphetamine Version: 0.8.10-11 Severity: serious Justification: FTBFS on i386, very likely to fail everywhere else Usertags: grid5000 Hi, During a rebuild of all packages in etch, I discovered that your package failed to build on i386. Relevant parts: g++ -L/usr/lib -L/usr/local/lib -L/usr/X11R6/lib -o amph src/Element.o src/File.o src/Gifload.o src/Graphfil.o src/Gui. o src/Appl.o src/Bullet.o src/Clut.o src/ConstVal.o src/Creeper.o src/Item.o src/Level.o src/Main.o src/Monster.o src/Mo nstrxx.o src/Object.o src/ObjInfo.o src/Player.o src/Pltform.o src/Shape.o src/ShapeLd.o src/Surface.o src/Thing.o src/W eapon.o src/System.o src/SndSys.o src/SoundList.o -lm -L/usr/lib -lSDL -lXpm -lXt /usr/bin/ld: cannot find -lXt collect2: ld returned 1 exit status make[1]: *** [amph] Error 1 The full build log is available from http://ox.blop.info/bazaar/buildlogs/20061107/ About the archive rebuilt: The rebuilt was done on about 30 AMD64 nodes of the Grid'5000 platform, using a chroot containing an etch i386 environment (not unstable). Internet was not accessible from the build nodes. The builds were processed as root, in a clean chroot environment. About Grid'5000: The Grid'5000 project aims at building a highly reconfigurable experimental Grid platform gathering 9 sites and featuring a total of 5000 CPUs. Its main purpose is to serve as an experimental testbed for research in Grid Computing. To learn more about Grid'5000, read https://www.grid5000.fr/ -- | Lucas Nussbaum | [EMAIL PROTECTED] http://www.lucas-nussbaum.net/ | | jabber: [EMAIL PROTECTED] GPG: 1024D/023B3F4F | -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#397557: default output dir is *not* as noted in srg.conf
Package: srg Version: 1.3.4-3 Severity: normal In srg.conf is noted that /var/www/srg_reports are the output dir per default. It's wrong. If no output dir is given, srg writes to ./srg_reports ! Heiko Schlittermann -- System Information: Debian Release: testing/unstable APT prefers testing APT policy: (500, 'testing') Architecture: amd64 (x86_64) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.18 Locale: LANG=C, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8) Versions of packages srg depends on: ii libc62.3.6.ds1-7 GNU C Library: Shared libraries ii libgcc1 1:4.1.1-19 GCC support library ii libstdc++6 4.1.1-19The GNU Standard C++ Library v3 Versions of packages srg recommends: ii apache1.3.34-4 versatile, high-performance HTTP s ii php4 4:4.4.4-3 server-side, HTML-embedded scripti ii squid 2.6.4-2Internet Object Cache (WWW proxy c -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#397513: segmentation fault on 'rm'
Juan Manuel Cardenas Talavera [EMAIL PROTECTED] wrote: Package: coreutils Version: 5.97-5.1 trying to use rm as a normal user or root this is the message: cardenas:~/Desktop# rm Segmentation fault ... I'm using nearly identical tools, yet don't see a problem. One difference: for me, libc6 is slightly newer 2.3.6.ds1-8 Also, my CPU is an AMD: kernel version is 2.6.18-1-amd64 When I strace the same command, I get mmap (not mmap2) calls, and I see no set_thread_area call here. But I believe those differences are irrelevant. What locale are you using? Does it still fail if you run it like this: env LC_ALL=C /bin/rm -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#364838: libxklavier: systematically kills GNOME session during login
Hi Loïc, Loïc Minier wrote: A simple uupdate .../libxklavier-3.1.tar.gz with some minor adjustments in the doc files location does it for me. It's in experimental... with a SONAME change. It would be nice to extract the relevant change as a patch, TIA. Thanks for the note. Unfortunately, I can't confirm the bug as fixed. I missed the SONAME change and libxklavier was just not properly used (and therefore, couldn't make trouble). Sorry, Roland
Bug#396277: Bug 216554 (thttpd) resolved by DSA 1205-1
Hi, Debian Bug #216554 has been resolved with Debian Security Advisory DSA 1205-1 (Debian Bug #396277) - seems that I discovered and reported the problem already 3 years ago but did not realize all security implications. regards, Sebastian -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#376505: arch2darcs FTBFS again
reopen 376505 tag 376505 -sid thanks Hi Steve, I could reproduce this build failure in a etch environment with version 1.0.6 (probably because GHC 6.4.2 now migrated to testing). Thus removing the sid tag. The full build log is available from http://ox.blop.info/bazaar/buildlogs/20061107/ -- | Lucas Nussbaum | [EMAIL PROTECTED] http://www.lucas-nussbaum.net/ | | jabber: [EMAIL PROTECTED] GPG: 1024D/023B3F4F | -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#396441: radvd: New upstream release: 1.0
*** Please type your report below this line *** New upstream 1.0 has been released. This version fixes many existing bugs and errors and is important for IPv6 Ready Logo Phase-2. -- System Information: Debian Release: testing/unstable APT prefers testing APT policy: (500, 'testing') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.17-2-686 Locale: LANG=ja_JP.eucJP, LC_CTYPE=ja_JP.eucJP (charmap=EUC-JP) Versions of packages radvd depends on: ii adduser 3.99Add and remove users and groups ii libc62.3.6.ds1-7 GNU C Library: Shared libraries radvd recommends no packages. -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#397561: beaglefs: FTBFS: Package libbeagle-0.0 was not found in the pkg-config search path.
Package: beaglefs Version: 1.0.3-1 Severity: serious Justification: FTBFS on i386, very likely to fail everywhere else Usertags: grid5000 Hi, During a rebuild of all packages in etch, I discovered that your package failed to build on i386. Relevant parts: make[1]: Entering directory `/build/root/beaglefs-1.0.3' Package libbeagle-0.0 was not found in the pkg-config search path. Perhaps you should add the directory containing `libbeagle-0.0.pc' to the PKG_CONFIG_PATH environment variable No package 'libbeagle-0.0' found Package libbeagle-0.0 was not found in the pkg-config search path. Perhaps you should add the directory containing `libbeagle-0.0.pc' to the PKG_CONFIG_PATH environment variable No package 'libbeagle-0.0' found hit.c:13:27: error: beagle/beagle.h: No such file or directory The full build log is available from http://ox.blop.info/bazaar/buildlogs/20061107/ About the archive rebuilt: The rebuilt was done on about 30 AMD64 nodes of the Grid'5000 platform, using a chroot containing an etch i386 environment (not unstable). Internet was not accessible from the build nodes. The builds were processed as root, in a clean chroot environment. About Grid'5000: The Grid'5000 project aims at building a highly reconfigurable experimental Grid platform gathering 9 sites and featuring a total of 5000 CPUs. Its main purpose is to serve as an experimental testbed for research in Grid Computing. To learn more about Grid'5000, read https://www.grid5000.fr/ -- | Lucas Nussbaum | [EMAIL PROTECTED] http://www.lucas-nussbaum.net/ | | jabber: [EMAIL PROTECTED] GPG: 1024D/023B3F4F | -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#397560: blender: FTBFS: /usr/bin/ld: cannot find -lsh
Package: blender Version: 2.42a-4 Severity: serious Justification: FTBFS on i386, very likely to fail everywhere else Usertags: grid5000 Hi, During a rebuild of all packages in etch, I discovered that your package failed to build on i386. Relevant parts: Compiling == 'buildinfo.c' Linking program == 'blender' /usr/bin/ld: cannot find -lsh: collect2: ld returned 1 exit status The full build log is available from http://ox.blop.info/bazaar/buildlogs/20061107/ About the archive rebuilt: The rebuilt was done on about 30 AMD64 nodes of the Grid'5000 platform, using a chroot containing an etch i386 environment (not unstable). Internet was not accessible from the build nodes. The builds were processed as root, in a clean chroot environment. About Grid'5000: The Grid'5000 project aims at building a highly reconfigurable experimental Grid platform gathering 9 sites and featuring a total of 5000 CPUs. Its main purpose is to serve as an experimental testbed for research in Grid Computing. To learn more about Grid'5000, read https://www.grid5000.fr/ -- | Lucas Nussbaum | [EMAIL PROTECTED] http://www.lucas-nussbaum.net/ | | jabber: [EMAIL PROTECTED] GPG: 1024D/023B3F4F | -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#397562: batik: FTBFS: should use sun-java5-* instead of j2sdk1.4
Package: batik Version: 1.6-3 Severity: important Usertags: grid5000 Hi, During a rebuild of all packages in etch, I discovered that your package failed to build on i386. Relevant parts: Building dependency tree... E: Package j2sdk1.4 has no installation candidate Package j2sdk1.4 is not available, but is referred to by another package. This may mean that the package is missing, has been obsoleted, or is only available from another source You could use sun-java5-sdk so this package would build without nonpackaged software. About the archive rebuilt: The rebuilt was done on about 30 AMD64 nodes of the Grid'5000 platform, using a chroot containing an etch i386 environment (not unstable). Internet was not accessible from the build nodes. The builds were processed as root, in a clean chroot environment. About Grid'5000: The Grid'5000 project aims at building a highly reconfigurable experimental Grid platform gathering 9 sites and featuring a total of 5000 CPUs. Its main purpose is to serve as an experimental testbed for research in Grid Computing. To learn more about Grid'5000, read https://www.grid5000.fr/ -- | Lucas Nussbaum | [EMAIL PROTECTED] http://www.lucas-nussbaum.net/ | | jabber: [EMAIL PROTECTED] GPG: 1024D/023B3F4F | -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#397559: aspectj: FTBFS: should use the sun-java5-* packages instead of j2sdk1.4
Package: aspectj Version: 1.1.1-2 Severity: important Usertags: grid5000 Hi, During a rebuild of all packages in etch, I discovered that your package failed to build on i386. It is using a build-dependency on j2sdk1.4, which could probably be replaced by one on sun-java5-jdk. It would allow the package to build without requiring non-packaged software. About the archive rebuilt: The rebuilt was done on about 30 AMD64 nodes of the Grid'5000 platform, using a chroot containing an etch i386 environment (not unstable). Internet was not accessible from the build nodes. The builds were processed as root, in a clean chroot environment. About Grid'5000: The Grid'5000 project aims at building a highly reconfigurable experimental Grid platform gathering 9 sites and featuring a total of 5000 CPUs. Its main purpose is to serve as an experimental testbed for research in Grid Computing. To learn more about Grid'5000, read https://www.grid5000.fr/ -- | Lucas Nussbaum | [EMAIL PROTECTED] http://www.lucas-nussbaum.net/ | | jabber: [EMAIL PROTECTED] GPG: 1024D/023B3F4F | -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#397563: ITP: remotedesk -- Remote Windows access tool
Package: wnpp Severity: wishlist * Package name: remotedesk.app Version : 0.1 Upstream Authors : Riccardo Mottola * URL : http://gap.nongnu.org/remotedesk/ * License : GNU GPL Description : Remote Windows access tool This is a graphical interface to rdesktop. . Homepage: http://gap.nongnu.org/remotedesk/ -- System Information: Debian Release: testing/unstable Architecture: powerpc Kernel: Linux ibook 2.4.23-ben1 #7 Sat Dec 27 11:20:38 CET 2003 ppc Locale: LANG=POSIX, LC_CTYPE=POSIX -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#351222: Confirm bug
hi some time after I posted that bug, after a major gnome upgrade in etch, my gnome-session crashed and the session was lost ; I had to move away my .gnome dir and create a whole new desktop; in that desktop I did not put a drawer. Now I create a drawer; I will test it for some days and let you know. BTW: I saw a curious bug: when I created the drawer, I opened it, it was empty, so I drag and drop two icons in it (using middle mouse button): they disappeared. I destroyed that drawer and created a second one: in the second one, drag-and-dropped icons do not disappear. a. -- Andrea Mennucc The EULA sounds like it was written by a team of lawyers who want to tell me what I can't do, and the GPL sounds like it was written by a human being who wants me to know what I can do. Anonymous,http://www.securityfocus.com/columnists/420 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#393645: boo still/also fails to build on i386
severity 393645 serious thanks Hi, boo still fails to build as of 2006-11-07, despite the migration of nant 0.85-1 to testing. I'm upgrading the severity of this bug to serious, since it fails to build on both i386 and amd64, so it's very likely to fail to build everywhere. -- | Lucas Nussbaum | [EMAIL PROTECTED] http://www.lucas-nussbaum.net/ | | jabber: [EMAIL PROTECTED] GPG: 1024D/023B3F4F | -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#382458: Please change the default location of socket file.
Hello, I think this bug should be of higher priority since it breaks the transition from sarge to etch if any of installed services use the socket file of slapd daemon. Regards, Dimitri Puzin aka Tristan-777
Bug#397565: cdbs: FTBFS: /usr/share/xml/docbook/stylesheet/dblatex/xsl/legalnotice.xsl line 22 element param: The value '$nodes' of the attribute 'name' is not a valid QName.
Package: cdbs Version: 0.4.47 Severity: serious Justification: FTBFS on i386, very likely to fail everywhere else Usertags: grid5000 Hi, During a rebuild of all packages in etch, I discovered that your package failed to build on i386. Relevant parts: ID recommended on colophon: Thanks dot -Tps2 -o buildcore.eps buildcore.dot -Gsize='6,10' epstopdf --outfile=buildcore.pdf buildcore.eps dot -Tps2 -o depgraph.eps depgraph.dot -Gsize='6,10' epstopdf --outfile=depgraph.pdf depgraph.eps dblatex -b pdftex -T db2latex cdbs-doc.xml make[4]: Entering directory `/tmp/tpub-root-20927' compilation error: file /usr/share/xml/docbook/stylesheet/dblatex/xsl/legalnotice.xsl line 22 element param The value '$nodes' of the attribute 'name' is not a valid QName. make[4]: *** [cdbs-doc.rtex] Error 5 The full build log is available from http://ox.blop.info/bazaar/buildlogs/20061107/ About the archive rebuilt: The rebuilt was done on about 30 AMD64 nodes of the Grid'5000 platform, using a chroot containing an etch i386 environment (not unstable). Internet was not accessible from the build nodes. The builds were processed as root, in a clean chroot environment. About Grid'5000: The Grid'5000 project aims at building a highly reconfigurable experimental Grid platform gathering 9 sites and featuring a total of 5000 CPUs. Its main purpose is to serve as an experimental testbed for research in Grid Computing. To learn more about Grid'5000, read https://www.grid5000.fr/ -- | Lucas Nussbaum | [EMAIL PROTECTED] http://www.lucas-nussbaum.net/ | | jabber: [EMAIL PROTECTED] GPG: 1024D/023B3F4F | -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#384596: xserver-xorg-input-mouse: After upgrade, many problems with Logitech mouse
Drew Parsons wrote: It seems that the support of the serial bus is buggy, in particular when one click with the left boutton. Hi Frederic. we have now upgraded to X11R7.1, with the mouse driver at 1:1.1.1-3. Do you find this new version has improved the situation with your serial mouse or is it still as buggy as before? Hi, I updated my system to xserver-xorg 1:7.1.0-5 and xserver-xorg-input-mouse 1:1.1.1-3. The serial mouse runs perfectly, the bug is corrected. :o) Regards. -- == | FREDERIC MASSOT | | http://www.juliana-multimedia.com | | mailto:[EMAIL PROTECTED] | ===Debian=GNU/Linux=== -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#397147: About handling of bugs and changelog entries
Hello pkg-voip maintainers, I'm a bit astonished on how the bugs 375141 and 397147 have been handled. While recompiling the testing version of asterisk I discovered that I lost ogg support because of the lack of build-depends so I start looking on the bugs and find out #375141 which reports the problem. This bug has been closed with this sentence: - format_ogg_vorbis.so was present in i386, no longer in packages (Closes: #375141) rant Sorry this is NOT a changelog entry, we don't know why it's fixed and how you fixed it or if you simply decided that Ogg support was not worth having. In the mean time the real bug is still here: i386 is the only arch with OGG support because it's compiled by the maintainer on a system with libvorbis-dev installed but the other archs don't have it and any custom recompilation (like mine) may result in a binary without ogg support. The bug is reported again with #397147 and this time the submitter was skilled enough to point out to the real problem and the real fix got integrated but the changelog entry is still as bad: [ Mark Purcell ] * asterisk-classic, asterisk-bristuff: /usr/lib/asterisk/modules/format_ogg_vorbis.so gone missing when rebuilt (Closes: #397147 You describe the problem but a changelog is here to describe the change and in particular the fix made to correct the problem. This is very important if you want to have good feedback from users/testers/bug reporters. I need to know what changed by looking at the changelog so that I can check if the fix is the one that I expected. /rant Please take some more care in the future, and many thanks for your work on asterisk! Cheers, -- Raphaël Hertzog Premier livre français sur Debian GNU/Linux : http://www.ouaza.com/livre/admin-debian/
Bug#397431: libapache2-mod-php4: php4 segfaults apache2.2 childs
On 07.11.06 11:59:25, Andreas Pakulat wrote: today the upgrade of php4 from 4:4.4.4~4 to 4:4.4.4-5 happened and it broke my apache. As long as the php4 module is activated each and every child of apache segfaults. This has been fixed in 4:4.4.4-6 by disabling LFS support. I haven't seen the bug on the php4 package. I'm closing this now. Andreas -- You are magnetic in your bearing. pgpPiUK52Nwc1.pgp Description: PGP signature
Bug#379628: [Linux-NTFS-Dev] CALL FOR HELP: Vista beta compatibility testing (was: Re: Bug#379628: ntfsresize: resizing a Vista NTFS partition leads to corrupted partition)
On Sunday 05 November 2006 23:57, Szakacsits Szabolcs wrote: So, it seems we should plan and implement denial of the resizing for Vista, asap. This is not so bad, because Vista started to include a non-destructive resizer. Well, it is a pity that we will no longer be able to resize partitions from within the Debian installer. However, I guess that this will be a temporary denial until someone has figured out what would need to be changed to make the Vista boot working again. Frans, how do you detect Vista? My idea is to check for the transactional directory. However this won't be enabled by default, so it may not exist at all. We currently check for the presence two files: /bootmgr and /Boot/BCD Cheers, FJP pgp5oxB7yuikz.pgp Description: PGP signature
Bug#397567: commons-io: FTBFS: failed test org.apache.commons.io.DemuxTestCase
Package: commons-io Version: 1.0-3 Severity: serious Justification: FTBFS on i386, very likely to fail everywhere else Usertags: grid5000 Hi, During a rebuild of all packages in etch, I discovered that your package failed to build on i386. Relevant parts: [junit] Testcase: testInputStream took 0.212 sec [junit] Testcase: testOutputStream took 0.184 sec [junit] Internal error: caught an unexpected exception. [junit] Please check your CLASSPATH and your installation. [junit] java/lang/NullPointerException [junit] Test org.apache.commons.io.DemuxTestCase FAILED [junit] Running org.apache.commons.io.EndianUtilsTest [junit] Tests run: 18, Failures: 0, Errors: 0, Time elapsed: 0.137 sec [junit] Testsuite: org.apache.commons.io.EndianUtilsTest [junit] Tests run: 18, Failures: 0, Errors: 0, Time elapsed: 0.137 sec The full build log is available from http://ox.blop.info/bazaar/buildlogs/20061107/ About the archive rebuilt: The rebuilt was done on about 30 AMD64 nodes of the Grid'5000 platform, using a chroot containing an etch i386 environment (not unstable). Internet was not accessible from the build nodes. The builds were processed as root, in a clean chroot environment. About Grid'5000: The Grid'5000 project aims at building a highly reconfigurable experimental Grid platform gathering 9 sites and featuring a total of 5000 CPUs. Its main purpose is to serve as an experimental testbed for research in Grid Computing. To learn more about Grid'5000, read https://www.grid5000.fr/ -- | Lucas Nussbaum | [EMAIL PROTECTED] http://www.lucas-nussbaum.net/ | | jabber: [EMAIL PROTECTED] GPG: 1024D/023B3F4F | -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#397566: classworlds: FTBFS: build-depends on j2sdk1.4
Package: classworlds Version: 1.0.1-1.1 Severity: important Usertags: grid5000 Hi, During a rebuild of all packages in etch, I discovered that your package failed to build on i386. It is using a build-dependency on j2sdk1.4, which could probably be replaced by one on sun-java5-jdk. It would allow the package to build without requiring non-packaged software. About the archive rebuilt: The rebuilt was done on about 30 AMD64 nodes of the Grid'5000 platform, using a chroot containing an etch i386 environment (not unstable). Internet was not accessible from the build nodes. The builds were processed as root, in a clean chroot environment. About Grid'5000: The Grid'5000 project aims at building a highly reconfigurable experimental Grid platform gathering 9 sites and featuring a total of 5000 CPUs. Its main purpose is to serve as an experimental testbed for research in Grid Computing. To learn more about Grid'5000, read https://www.grid5000.fr/ -- | Lucas Nussbaum | [EMAIL PROTECTED] http://www.lucas-nussbaum.net/ | | jabber: [EMAIL PROTECTED] GPG: 1024D/023B3F4F | -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#397572: linux-igd: FTBFS: error: conflicting types for 'parse_port'
Package: linux-igd Version: 0.cvs20060201-1 Severity: serious Hello, There was a problem while autobuilding your package: Automatic build of linux-igd_0.cvs20060201-1 on avidan by sbuild/i386 98 Build started at 20061108-0810 ** ... gcc -Wall -g -I/usr/local/include/upnp -I../include -DHAVE_LIBIPTC -I/usr/include -c pmlist.c gcc -Wall -g -I/usr/local/include/upnp -I../include -DHAVE_LIBIPTC -I/usr/include -c util.c gcc -Wall -g -I/usr/local/include/upnp -I../include -DHAVE_LIBIPTC -I/usr/include -c config.c gcc -Wall -g -I/usr/local/include/upnp -I../include -DHAVE_LIBIPTC -I/usr/include -c iptc.c iptc.c:25: error: conflicting types for 'parse_port' /usr/include/iptables.h:155: error: previous declaration of 'parse_port' was here iptc.c:27: error: conflicting types for 'service_to_port' /usr/include/iptables.h:154: error: previous declaration of 'service_to_port' was here make[1]: *** [iptc.o] Error 1 make[1]: Leaving directory `/build/buildd/linux-igd-0.cvs20060201' make: *** [build-stamp] Error 2 ** Build finished at 20061108-0810 FAILED [dpkg-buildpackage died] -- Julien Danjou .''`. Debian Developer : :' : http://julien.danjou.info `. `' http://people.debian.org/~acid `- 9A0D 5FD9 EB42 22F6 8974 C95C A462 B51E C2FE E5CD signature.asc Description: Digital signature
Bug#397568: darcs-buildpackage: FTBFS: setup: darcs-buildpackage.cabal:10: Parse of field 'extensions' failed:
Package: darcs-buildpackage Version: 0.5.7 Severity: serious Justification: FTBFS on i386, very likely to fail everywhere else Usertags: grid5000 Hi, During a rebuild of all packages in etch, I discovered that your package failed to build on i386. Relevant parts: /usr/bin/make make[1]: Entering directory `/build/root/darcs-buildpackage-0.5.7' ghc -package Cabal Setup.lhs -o setup ./setup configure setup: darcs-buildpackage.cabal:10: Parse of field 'extensions' failed: make[1]: *** [all] Error 1 make[1]: Leaving directory `/build/root/darcs-buildpackage-0.5.7' make: *** [build-stamp] Error 2 The full build log is available from http://ox.blop.info/bazaar/buildlogs/20061107/ About the archive rebuilt: The rebuilt was done on about 30 AMD64 nodes of the Grid'5000 platform, using a chroot containing an etch i386 environment (not unstable). Internet was not accessible from the build nodes. The builds were processed as root, in a clean chroot environment. About Grid'5000: The Grid'5000 project aims at building a highly reconfigurable experimental Grid platform gathering 9 sites and featuring a total of 5000 CPUs. Its main purpose is to serve as an experimental testbed for research in Grid Computing. To learn more about Grid'5000, read https://www.grid5000.fr/ -- | Lucas Nussbaum | [EMAIL PROTECTED] http://www.lucas-nussbaum.net/ | | jabber: [EMAIL PROTECTED] GPG: 1024D/023B3F4F | -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#397574: csmash: FTBFS: configure: error: OpenGL library not found.
Package: csmash Version: 0.6.6-6.2 Severity: serious Justification: FTBFS on i386, very likely to fail everywhere else Usertags: grid5000 Hi, During a rebuild of all packages in etch, I discovered that your package failed to build on i386. Relevant parts: checking for fabs in -lm... no checking for glLoadIdentity in -lGL... no checking for glLoadIdentity in -lMesaGL... no checking for main in -lOpenGL32... no configure: error: OpenGL library not found. make: *** [build-stamp] Error 1 The full build log is available from http://ox.blop.info/bazaar/buildlogs/20061107/ About the archive rebuilt: The rebuilt was done on about 30 AMD64 nodes of the Grid'5000 platform, using a chroot containing an etch i386 environment (not unstable). Internet was not accessible from the build nodes. The builds were processed as root, in a clean chroot environment. About Grid'5000: The Grid'5000 project aims at building a highly reconfigurable experimental Grid platform gathering 9 sites and featuring a total of 5000 CPUs. Its main purpose is to serve as an experimental testbed for research in Grid Computing. To learn more about Grid'5000, read https://www.grid5000.fr/ -- | Lucas Nussbaum | [EMAIL PROTECTED] http://www.lucas-nussbaum.net/ | | jabber: [EMAIL PROTECTED] GPG: 1024D/023B3F4F | -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#376505: arch2darcs FTBFS again
close 376505 1.0.7 quit On Wed, Nov 08, 2006 at 09:39:53AM +0100, Lucas Nussbaum wrote: reopen 376505 tag 376505 -sid thanks I could reproduce this build failure in a etch environment with version 1.0.6 (probably because GHC 6.4.2 now migrated to testing). Thus removing the sid tag. Removing the tag is correct. Reopening the bug is *not*. This bug was fixed in version 1.0.7, which is later than the version you were retesting with. And in any case, version 1.0.8 is now in testing. -- Steve Langasek Give me a lever long enough and a Free OS Debian Developer to set it on, and I can move the world. [EMAIL PROTECTED] http://www.debian.org/ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#397569: lat: FTBFS: error CS0619:`Mono.Unix.Native.Syscall.crypt(string, string)' is obsolete
Package: lat Version: 1.2.0.1-1 Severity: serious Hello, There was a problem while autobuilding your package: Automatic build of lat_1.2.0.1-1 on avidan by sbuild/i386 98 Build started at 20061108-0651 ** ... /usr/bin/gmcs -codepage:utf8-out:lat.exe ./AboutDialog.cs ./AddObjectClassDialog.cs ./AssemblyInfo.cs ./AttributeEditorWidget.cs ./ConnectDialog.cs ./ConnectionManager.cs ./CreateEntryDialog.cs ./Defines.cs ./LDIF.cs ./LdapEntryAnalyzer.cs ./LdapSearch.cs ./LdapServer.cs ./LdapTreeView.cs ./Log.cs ./LoginDialog.cs ./Main.cs ./MassEditDialog.cs ./NewEntryDialog.cs ./PasswordDialog.cs ./Preferences.cs ./ProfileDialog.cs ./RenameEntryDialog.cs ./SMBPassword.cs ./SambaPopulateDialog.cs ./SchemaTreeView.cs ./SearchBuilderDialog.cs ./SearchResultsTreeView.cs ./SelectContainerDialog.cs ./SelectGroupsDialog.cs ./ServerData.cs ./Templates.cs ./TemplatesDialog.cs ./TemplateEditorDialog.cs ./TimeDateDialog.cs ./Util.cs ./ViewDataTreeView.cs ./ViewDialog.cs ./ViewPluginManager.cs ./ViewsTreeView.cs ./Window.cs -r:../gnome-keyring-glue/gnome-keyring-glue.dll -r:Mono.Posix -r:Mono.Security -r:Novell.Directory.Ldap /resource:../resources/lat.glade /resource:../resources/lat.png /resource:../resources/contact-new.png /resource:../resources/contact-new-48x48.png /resource:../resources/edit-find.png /resource:../resources/edit-find-48x48.png /resource:../resources/locked16x16.png /resource:../resources/locked-48x48.png /resource:../resources/stock_person.png /resource:../resources/text-x-generic.png /resource:../resources/unlocked16x16.png /resource:../resources/users.png /resource:../resources/x-directory-normal.png /resource:../resources/x-directory-remote-server.png /resource:../resources/x-directory-remote-workgroup.png /resource:../resources/mail-message-new.png /resource:../resources/document-save.png /resource:../resources/go-home.png /resource:../resources/x-directory-remote-server-48x48.png -r:/usr/lib/pkgconfig/../../lib/mono/gtk-sharp-2.0/pango-sharp.dll -r:/usr/lib/pkgconfig/../../lib/mono/gtk-sharp-2.0/atk-sharp.dll -r:/usr/lib/pkgconfig/../../lib/mono/gtk-sharp-2.0/gdk-sharp.dll -r:/usr/lib/pkgconfig/../../lib/mono/gtk-sharp-2.0/gtk-sharp.dll -r:/usr/lib/pkgconfig/../../lib/mono/gtk-sharp-2.0/glib-sharp.dll -r:/usr/lib/pkgconfig/../../lib/mono/gtk-sharp-2.0/gnome-sharp.dll -r:/usr/lib/pkgconfig/../../lib/mono/gtk-sharp-2.0/art-sharp.dll -r:/usr/lib/pkgconfig/../../lib/mono/gtk-sharp-2.0/gnome-vfs-sharp.dll -r:/usr/lib/pkgconfig/../../lib/mono/gtk-sharp-2.0/gconf-sharp.dll -r:/usr/lib/pkgconfig/../../lib/mono/gtk-sharp-2.0/gconf-sharp-peditors.dll -r:/usr/lib/pkgconfig/../../lib/mono/gtk-sharp-2.0/glade-sharp.dll ./PasswordDialog.cs(182,44): error CS0619: `Mono.Unix.Native.Syscall.crypt(string, string)' is obsolete: `This is insecure and should not be used' Compilation failed: 1 error(s), 0 warnings make[3]: *** [lat.exe] Error 1 make[3]: Leaving directory `/build/buildd/lat-1.2.0.1/lat' make[2]: *** [all-recursive] Error 1 make[2]: Leaving directory `/build/buildd/lat-1.2.0.1/lat' make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory `/build/buildd/lat-1.2.0.1' make: *** [debian/stamp-makefile-build] Error 2 ** Build finished at 20061108-0656 FAILED [dpkg-buildpackage died] -- Julien Danjou .''`. Debian Developer : :' : http://julien.danjou.info `. `' http://people.debian.org/~acid `- 9A0D 5FD9 EB42 22F6 8974 C95C A462 B51E C2FE E5CD signature.asc Description: Digital signature
Bug#394097: libapache2-mod-auth-pam: doesnt work with Apache 2.1
On Tue November 7 2006 13:00, Robbert Kouprie wrote: My complete config is: Directory /var/www/protected AuthType Basic AuthName Please login AuthPAM_Enabled on AuthPAM_FallThrough off AuthBasicAuthoritative off require valid-user /Directory This did not work out of the box for me when I upgraded to apache2 2.2.3-3. After some trial and errors -- apache2 error messages did not ring any bell -- it occurred that for auth_pam with Require valid-user to work, the auth_basic and authz_user modules have to be enabled. HTH, Robin -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#397573: snmpd - ifInOctets and ifOutOctets on x86_64 do not increment or show lo's values
Package: snmpd Version: 5.1.2-6.2 Severity: important Debian-release: 3.1 Debian-architecture: amd64 Kernel-version: Linux www 2.6.8-12-em64t-p4-smp #1 SMP Tue Sep 19 01:32:16 UTC 2006 x86_64 GNU/Linux Libc-version: 2.3.2.ds1-22sarge4 IF-MIB::ifInOctets and ifOutOctets do not increment except for lo or show the same value for all interfaces (the value of the first if). This problem seems to manifest only over the wire. Same problem is reported by several users of net-snmp 5.1.2 on x86_64 platforms.( http://sourceforge.net/mailarchive/message.php?msg_id=36566214 ) Correct output on localhost : www:~# snmpwalk -v2c -c ** localhost 1.3.6.1.2.1.2.2.1.10 IF-MIB::ifInOctets.1 = Counter32: 122904317 IF-MIB::ifInOctets.2 = Counter32: 10431637148 IF-MIB::ifInOctets.3 = Counter32: 0 IF-MIB::ifInOctets.4 = Counter32: 0 Incorrrect output on remote server using same debian release for x86 monitor:~# snmpwalk -v2c -c ** REMOTE_HOST 1.3.6.1.2.1.2.2.1.10 IF-MIB::ifInOctets.1 = Counter32: 122796743 IF-MIB::ifInOctets.2 = Counter32: 122796743 IF-MIB::ifInOctets.3 = Counter32: 0 IF-MIB::ifInOctets.4 = Counter32: 0 (comunity has been replaced by ** for security purposes, same goes for REMOTE_HOST, same problem applies for ifOutOctets) Sugestion would be to upgrade the net-snmp package to version 5.3.1 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#397571: debian-reference: FTBFS: ERROR: reference.zh-tw.pdf could not be generated properly
Package: debian-reference Version: 1.09-3 Severity: serious Justification: FTBFS on i386, very likely to fail everywhere else Usertags: grid5000 Hi, During a rebuild of all packages in etch, I discovered that your package failed to build on i386. Relevant parts: ln -sf zh-tw/hyperref-full.cfg hyperref.cfg debiandoc2latexpdf -s bin/fixlatex -l $(echo zh-tw | bin/getlocale) reference.zh-tw.sgml debiandoc2latexpdf: ERROR: reference.zh-tw.pdf could not be generated properly debiandoc2latexpdf: rerun with the -v option to found out why debiandoc2latexpdf: or check the log file reference.zh-tw.log make[1]: *** [reference.zh-tw.pdf] Error 1 The full build log is available from http://ox.blop.info/bazaar/buildlogs/20061107/ About the archive rebuilt: The rebuilt was done on about 30 AMD64 nodes of the Grid'5000 platform, using a chroot containing an etch i386 environment (not unstable). Internet was not accessible from the build nodes. The builds were processed as root, in a clean chroot environment. About Grid'5000: The Grid'5000 project aims at building a highly reconfigurable experimental Grid platform gathering 9 sites and featuring a total of 5000 CPUs. Its main purpose is to serve as an experimental testbed for research in Grid Computing. To learn more about Grid'5000, read https://www.grid5000.fr/ -- | Lucas Nussbaum | [EMAIL PROTECTED] http://www.lucas-nussbaum.net/ | | jabber: [EMAIL PROTECTED] GPG: 1024D/023B3F4F | -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#397570: kflickr: Crashes when right-clicking photo thumbnail
Package: kflickr Version: 0.6-3 Severity: normal After adding a group of photos to upload to Flickr, I right click on a thumbnail and the application crashes consistently. This is the end of the stacktrace (the only part with symbols): [KCrash handler] #5 0xb6e98f74 in QWidget::testWFlags () from /usr/lib/libqt-mt.so.3 #6 0xb6ed7c5f in QWidget::isPopup () from /usr/lib/libqt-mt.so.3 #7 0xb7092e22 in QPopupMenu::popup () from /usr/lib/libqt-mt.so.3 #8 0xb64eefb8 in PhotoListView::showRMBMenu () from /usr/lib/kde3/libkflickrpart.so #9 0xb64ef0b7 in PhotoListView::qt_invoke () from /usr/lib/kde3/libkflickrpart.so #10 0xb6f6dcb3 in QObject::activate_signal () from /usr/lib/libqt-mt.so.3 #11 0xb730e351 in QListView::rightButtonClicked () from /usr/lib/libqt-mt.so.3 #12 0xb7069a49 in QListView::contentsMouseReleaseEventEx () from /usr/lib/libqt-mt.so.3 #13 0xb7069a76 in QListView::contentsMouseReleaseEvent () from /usr/lib/libqt-mt.so.3 #14 0xb7d88b93 in KListView::contentsMouseReleaseEvent () from /usr/lib/libkdeui.so.4 #15 0xb70a1da9 in QScrollView::viewportMouseReleaseEvent () from /usr/lib/libqt-mt.so.3 #16 0xb70a3336 in QScrollView::eventFilter () from /usr/lib/libqt-mt.so.3 #17 0xb706b396 in QListView::eventFilter () from /usr/lib/libqt-mt.so.3 #18 0xb6f6d266 in QObject::activate_filters () from /usr/lib/libqt-mt.so.3 #19 0xb6f6d2e4 in QObject::event () from /usr/lib/libqt-mt.so.3 #20 0xb6fa4576 in QWidget::event () from /usr/lib/libqt-mt.so.3 #21 0xb6f05bd6 in QApplication::internalNotify () from /usr/lib/libqt-mt.so.3 #22 0xb6f07d79 in QApplication::notify () from /usr/lib/libqt-mt.so.3 #23 0xb762ee6e in KApplication::notify () from /usr/lib/libkdecore.so.4 #24 0xb6e99445 in QApplication::sendSpontaneousEvent () from /usr/lib/libqt-mt.so.3 #25 0xb6e980df in QETWidget::translateMouseEvent () from /usr/lib/libqt-mt.so.3 #26 0xb6e96660 in QApplication::x11ProcessEvent () from /usr/lib/libqt-mt.so.3 #27 0xb6eaccb2 in QEventLoop::processEvents () from /usr/lib/libqt-mt.so.3 #28 0xb6f20129 in QEventLoop::enterLoop () from /usr/lib/libqt-mt.so.3 #29 0xb6f1ff4a in QEventLoop::exec () from /usr/lib/libqt-mt.so.3 #30 0xb6f0776f in QApplication::exec () from /usr/lib/libqt-mt.so.3 #31 0x0804e116 in ?? () #32 0xbfe22780 in ?? () #33 0x0809b7e0 in ?? () #34 0xbfe228b0 in ?? () #35 0x in ?? () -- System Information: Debian Release: 4.0 APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.17.7 Locale: LANG=en_CA, LC_CTYPE=en_CA (charmap=ISO-8859-1) Versions of packages kflickr depends on: ii kdelibs4c2a4:3.5.5a.dfsg.1-3 core libraries and binaries for al ii libc6 2.3.6.ds1-8 GNU C Library: Shared libraries ii libgcc11:4.1.1-19GCC support library ii libqt3-mt 3:3.3.7-1 Qt GUI Library (Threaded runtime v ii libstdc++6 4.1.1-19 The GNU Standard C++ Library v3 kflickr recommends no packages. -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#397575: cmucl: FTBFS: cp: cannot stat `src/docs/cmu-user/index.html': No such file or directory
Package: cmucl Version: 19c-release-20051115-3 Severity: serious Justification: FTBFS on i386, very likely to fail everywhere else Usertags: grid5000 Hi, During a rebuild of all packages in etch, I discovered that your package failed to build on i386. Relevant parts: dh_testdir dh_testroot dh_installchangelogs src/general-info/release-19b.txt dh_installdocs cp: cannot stat `src/docs/cmu-user/index.html': No such file or directory dh_installdocs: command returned error code 256 The full build log is available from http://ox.blop.info/bazaar/buildlogs/20061107/ About the archive rebuilt: The rebuilt was done on about 30 AMD64 nodes of the Grid'5000 platform, using a chroot containing an etch i386 environment (not unstable). Internet was not accessible from the build nodes. The builds were processed as root, in a clean chroot environment. About Grid'5000: The Grid'5000 project aims at building a highly reconfigurable experimental Grid platform gathering 9 sites and featuring a total of 5000 CPUs. Its main purpose is to serve as an experimental testbed for research in Grid Computing. To learn more about Grid'5000, read https://www.grid5000.fr/ -- | Lucas Nussbaum | [EMAIL PROTECTED] http://www.lucas-nussbaum.net/ | | jabber: [EMAIL PROTECTED] GPG: 1024D/023B3F4F | -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#397576: Installation report - file mod times wrong
Package: installation-reports Boot method: cd netinst image Image version: http://cdimage.debian.org/cdimage/daily-builds/daily/arch-latest/i386/iso-cd/debian-testing-i386-netinst.iso Date: 20061105 image Machine: Processor: Athlon Memory: 512 Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot: [O] Detect network card:[O ] Configure network: [O ] Detect CD: [O ] Load installer modules: [O ] Detect hard drives: [O ] Partition hard drives: [O ] Install base system:[O ] Clock/timezone setup: [E ] User/password setup:[ O] Install tasks: [O ] Install boot loader:[O ] Overall install:[ ] Comments/Problems: The file modification times were fine during the install, however after rebooting, most of the system had modification times 10 hours in the future. The system clock is set to local time (checked in bios). I chose the correct timezone in the installer and UTC was set to NO. I have had this problem with installs from the di-beta3 cd and weekly build (20061009). The output of date was correct after reboot eg: ls -l / ... drwxr-xr-x 12 root root 4096 2006-11-09 01:38 usr drwxr-xr-x 14 root root 4096 2006-11-09 01:45 var lrwxrwxrwx 1 root root24 2006-11-09 01:36 vmlinuz - boot/vmlinuz-2.6.16-2-k7 navi:/# date Wed Nov 8 15:53:04 EST 2006 This is a bit of a problem. In the case of weekly(20061009) it prevents fc-cache -ffrom running properly until 10 hours after the install (which prevents ttf-opensymbol from installing, which prevents openoffice from installing). I assume the 10 hours is due to me being at GMT+10. Joel -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#397577: ITP: renrot -- A program to rename and rotate files according to EXIF tags
Package: wnpp Severity: wishlist Owner: Andy Shevchenko [EMAIL PROTECTED] * Package name: renrot Version : 0.25 Upstream Author : Zeus Panchenko [EMAIL PROTECTED], Andy Shevchenko [EMAIL PROTECTED] * URL : http://freshmeat.net/projects/renrot/ * License : GPL or Artistic Programming Lang: Perl Description : A program to rename and rotate files according to EXIF tags Renrot renames files according the DateTimeOriginal and FileModifyDate EXIF tags, if they exist. Otherwise, the name will be set according to the current timestamp. Additionally, it rotates files and their thumbnails, accordingly Orientation EXIF tag. -- System Information: Debian Release: 4.0 APT prefers unstable APT policy: (500, 'unstable'), (500, 'stable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.18.1 Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968) -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#397578: sylpheed-claws-gtk2: exits on validating config dialog
Package: sylpheed-claws-gtk2 Version: 2.5.6-1 Severity: normal Clicking ok on a dialog after selecting an item in a tree view or a list causes sylpheed to crash with this error : ** ERROR **: file gailtreeview.c: line 3604 (garbage_collect_cell_data): assertion failed: (GAIL_IS_TREE_VIEW (data)) aborting... to reproduce : 1) Configuration Plugins... 2) select a plugin in the list at right 3) click Close I look like I'm explaining to someone who never touched a computer and not to a DD :-p but I must explain the EXACT steps to reproduce ;-) Anyway, it just crashes, there is no data loss (this also happens in the account config dialog) -- System Information: Debian Release: testing/unstable APT prefers testing APT policy: (500, 'testing') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.17-2-686 Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8) Versions of packages sylpheed-claws-gtk2 depends on: ii libaspell15 0.60.4-4 GNU Aspell spell-checker runtime l ii libc6 2.3.6.ds1-7 GNU C Library: Shared libraries ii libcompfaceg1 1:1.5.2-3Compress/decompress images for mai ii libetpan8 0.47-1 mail handling library ii libglib2.0-02.12.4-1 The GLib library of C routines ii libgnomeprint2.2-0 2.12.1-6 The GNOME 2.2 print architecture - ii libgnomeprintui2.2-02.12.1-4 GNOME 2.2 print architecture User ii libgtk2.0-0 2.8.20-3 The GTK+ graphical user interface ii libldap22.1.30-13+b1 OpenLDAP libraries ii libpango1.0-0 1.14.7-1 Layout and rendering of internatio ii libpisock9 0.12.1-5 library for communicating with a P ii libssl0.9.8 0.9.8c-3 SSL shared libraries Versions of packages sylpheed-claws-gtk2 recommends: ii aspell-ar [aspell-diction 0.0.20060329-3 Arabic dictionary for aspell ii aspell-fr [aspell-diction 0.50-3-6 French dictionary for aspell ii metamail 2.7-52 implementation of MIME ii sylpheed-claws-gtk2-i18n 2.5.6-1Locale data for Sylpheed-Claws GTK ii sylpheed-claws-scripts1.0.5-5Helper scripts for Sylpheed and Sy ii xfonts-100dpi 1:1.0.0-3 100 dpi fonts for X ii xfonts-75dpi 1:1.0.0-3 75 dpi fonts for X -- no debconf information ___ Découvrez une nouvelle façon d'obtenir des réponses à toutes vos questions ! Profitez des connaissances, des opinions et des expériences des internautes sur Yahoo! Questions/Réponses http://fr.answers.yahoo.com -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#349256: Debian Bug Tracking System [EMAIL PROTECTED]
You have followed up to an installation report that was already closed. In that case it is better to submit a new report. Comments/Problems: The last step kept repeating. It told me that I was done and the computer will reboot over and over again. Finally I had to do this myself... I have no idea what you mean here exactly. I don't understand what the exact problem is you see, and also not how you fixed it. Please give us exact messages or errors you see on the screen. Otherwise it is nearly impossible to identify the problem or to help. Cheers, FJP -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#397583: Please provide the Basque transitional package mozilla-firefox-locale-eu
Package: mozilla-firefox-locale-all Severity: important Hello, When the Basque langpack was added to mozilla-firefox-locale-all, only firefox-locale-eu was created, leaving out mozilla-firefox-locale-eu, which already existed in a separate source package. This results in some cruft in the archive, as the old source package still exists, while it only provides the transitional package. Please upload a new version of mozilla-firefox-locale-all contaning the transitional package so the old source and binary can go away automatically. Jordi -- System Information: Debian Release: 4.0 APT prefers unstable APT policy: (990, 'unstable'), (1, 'experimental') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.18-1-k7 Locale: LANG=ca_ES.UTF-8, LC_CTYPE=ca_ES.UTF-8 (charmap=UTF-8) -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#396898: democracyplayer: no sound when playing flash movie
forwarded 396898 https://develop.participatoryculture.org/democracy/ticket/3927 thanks On Fri, Nov 03, 2006 at 04:30:19PM +0100, Petter Reinholdtsen wrote: When trying the flash movies available via URL:http://www.videobomb.com/rss/posts/front (which I found via democracyplayer), there is no sound. These movies play fine with mplayer. One such example is URL:http://www.youtube.com/v/NvQScRuZj9s. The images show up as they should, but there is no audio at all. This is a known issue, I reported it here: https://develop.participatoryculture.org/democracy/ticket/3927 It looks like a xine issue, though, not necessarily a democracyplayer issue... Cheers, Uwe. -- http://www.hermann-uwe.de | http://www.holsham-traders.de http://www.crazy-hacks.org | http://www.unmaintained-free-software.org signature.asc Description: Digital signature
Bug#397582: icedove: Many many windows opened with Return+Mouse1
Package: icedove Version: 1.5.0.7-3 Severity: normal While trying to select several junk messages for deletion, I clicked on the first of the messages, accidentally hitheld Return insted of shift and then on the last message. This opened a very large number of mail windows -- around twice as many as were in the selection -- all showing the same message. -- System Information: Debian Release: testing/unstable APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.17-1-k7 Locale: LANG=de_DE, LC_CTYPE=de_DE (charmap=ISO-8859-1) (ignored: LC_ALL set to de_DE) Versions of packages icedove depends on: ii debconf [debconf-2.0] 1.5.6 Debian configuration management sy ii libatk1.0-01.12.3-1 The ATK accessibility toolkit ii libc6 2.3.6.ds1-7 GNU C Library: Shared libraries ii libcairo2 1.2.4-4 The Cairo 2D vector graphics libra ii libfontconfig1 2.4.1-2 generic font configuration library ii libgcc11:4.1.1-17GCC support library ii libglib2.0-0 2.12.4-1 The GLib library of C routines ii libgtk2.0-02.8.20-3 The GTK+ graphical user interface ii libjpeg62 6b-13 The Independent JPEG Group's JPEG ii libpango1.0-0 1.14.7-1 Layout and rendering of internatio ii libpng12-0 1.2.8rel-7PNG library - runtime ii libstdc++6 4.1.1-17 The GNU Standard C++ Library v3 ii libx11-6 2:1.0.3-2 X11 client-side library ii libxcursor11.1.7-4 X cursor management library ii libxext6 1:1.0.1-2 X11 miscellaneous extension librar ii libxfixes3 1:4.0.1-4 X11 miscellaneous 'fixes' extensio ii libxft22.1.8.2-8 FreeType-based font drawing librar ii libxi6 1:1.0.1-3 X11 Input extension library ii libxinerama1 1:1.0.1-4.1 X11 Xinerama extension library ii libxrandr2 2:1.1.0.2-4 X11 RandR extension library ii libxrender11:0.9.1-3 X Rendering Extension client libra ii libxt6 1:1.0.2-2 X11 toolkit intrinsics library ii myspell-en-gb [myspell-dic 1:2.0.4~rc1-3 English_british dictionary for mys ii myspell-en-us [myspell-dic 1:2.0.4~rc1-3 English_american dictionary for my ii zlib1g 1:1.2.3-13compression library - runtime icedove recommends no packages. -- debconf information: icedove/browser: Debian -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#397581: Please allow for configuration of the step size in mixer and backlight settings
Package: pbbuttonsd Version: 0.7.9-1 Severity: wishlist Hi, Since a while, I've been annoyed at the 10% step sizes used by pbbuttonsd. They are way too large (on my powerbook, often I find that I can't hear what's going on when sound is at 60%, while 70% is just too loud to be comfortable); OTOH, I agree that using a 1% step size was too small. Now since very recently, backlight settings have also switched to 10% steps. My powerbook has 15 brightness which I found convenient; and 10 does not map very well on 15. Unfortunately, I cannot go back to what I find proper behaviour other than by using an older version of pbbuttons. It would be great if pbbuttons would have a configuration item that would allow me how finely-grained I can increase or decrease brightness or volume. -- System Information: Debian Release: 4.0 Architecture: powerpc (ppc) Shell: /bin/sh linked to /bin/dash Kernel: Linux 2.6.18-1-powerpc Locale: [EMAIL PROTECTED], [EMAIL PROTECTED] (charmap=UTF-8) Versions of packages pbbuttonsd depends on: ii hdparm 6.9-1 tune hard disk parameters for high ii libasound2 1.0.13-1ALSA library ii libc62.3.6.ds1-8 GNU C Library: Shared libraries ii libgcc1 1:4.1.1-19 GCC support library ii libglib2.0-0 2.12.4-1The GLib library of C routines ii libstdc++6 4.1.1-19The GNU Standard C++ Library v3 ii lsb-base 3.1-19 Linux Standard Base 3.1 init scrip ii makedev 2.3.1-83creates device files in /dev Versions of packages pbbuttonsd recommends: ii laptop-mode-tools 1.32-1 Scripts to spin down hard drive an -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#397580: Ignore rule in server profile for kernel related to BANDWITH IN/OUT
Package: logcheck-database Version: 1.2.39 I am trying, but cann't make working ignore rule in ignore.d.server/kernel location so it could discard unneeded data. Following content I am getting from logcheck and I would like to force logcheck to ignore it all. System Events =-=-=-=-=-=-= Nov 8 10:44:06 jupiter kernel: BANDWIDTH_OUT:IN= OUT=eth0 SRC=212.200.101.26 DST=192.168.50.11 LEN=88 TOS=0x00 PREC=0x00 TTL=64 ID=45204 DF PROTO=TCP SPT=1 DPT=2268 WINDOW=6792 RES=0x00 ACK PSH URGP=0 Nov 8 10:44:06 jupiter kernel: BANDWIDTH_OUT:IN= OUT=eth0 SRC=212.200.101.26 DST=192.168.50.11 LEN=455 TOS=0x00 PREC=0x00 TTL=64 ID=45205 DF PROTO=TCP SPT=1 DPT=2268 WINDOW=6792 RES=0x00 ACK PSH FIN URGP=0 Nov 8 10:44:06 jupiter kernel: BANDWIDTH_IN:IN=eth0 OUT= MAC=00:50:8b:ec:95:34:00:50:bf:13:6a:8a:08:00 SRC=192.168.50.11 DST=212.200.101.26 LEN=40 TOS=0x00 PREC=0x00 TTL=127 ID=20817 DF PROTO=TCP SPT=2268 DPT=1 WINDOW=65535 RES=0x00 ACK URGP=0 Nov 8 10:44:06 jupiter kernel: BANDWIDTH_IN:IN=eth0 OUT= MAC=00:50:8b:ec:95:34:00:50:bf:13:6a:8a:08:00 SRC=192.168.50.11 DST=212.200.101.26 LEN=40 TOS=0x00 PREC=0x00 TTL=127 ID=20818 DF PROTO=TCP SPT=2268 DPT=1 WINDOW=65535 RES=0x00 ACK FIN URGP=0 Nov 8 10:44:06 jupiter kernel: BANDWIDTH_OUT:IN= OUT=eth0 SRC=212.200.101.26 DST=192.168.50.11 LEN=40 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=TCP SPT=1 DPT=2268 WINDOW=6792 RES=0x00 ACK URGP=0 Nov 8 10:44:09 jupiter kernel: BANDWIDTH_IN:IN=eth0 OUT= MAC=00:50:8b:ec:95:34:00:50:bf:13:6a:8a:08:00 SRC=192.168.50.11 DST=212.200.101.26 LEN=48 TOS=0x00 PREC=0x00 TTL=127 ID=20819 DF PROTO=TCP SPT=2269 DPT=1 WINDOW=65535 RES=0x00 SYN URGP=0 Nov 8 10:44:09 jupiter kernel: BANDWIDTH_OUT:IN= OUT=eth0 SRC=212.200.101.26 DST=192.168.50.11 LEN=48 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=TCP SPT=1 DPT=2269 WINDOW=5840 RES=0x00 ACK SYN URGP=0 Nov 8 10:44:09 jupiter kernel: BANDWIDTH_IN:IN=eth0 OUT= MAC=00:50:8b:ec:95:34:00:50:bf:13:6a:8a:08:00 SRC=192.168.50.11 DST=212.200.101.26 LEN=40 TOS=0x00 PREC=0x00 TTL=127 ID=20821 DF PROTO=TCP SPT=2269 DPT=1 WINDOW=65535 RES=0x00 ACK URGP=0 Nov 8 10:44:09 jupiter kernel: BANDWIDTH_IN:IN=eth0 OUT= MAC=00:50:8b:ec:95:34:00:50:bf:13:6a:8a:08:00 SRC=192.168.50.11 DST=212.200.101.26 LEN=142 TOS=0x00 PREC=0x00 TTL=127 ID=20822 DF PROTO=TCP SPT=2269 DPT=1 WINDOW=65535 RES=0x00 ACK PSH URGP=0 Nov 8 10:44:09 jupiter kernel: BANDWIDTH_OUT:IN= OUT=eth0 SRC=212.200.101.26 DST=192.168.50.11 LEN=40 TOS=0x00 PREC=0x00 TTL=64 ID=9378 DF PROTO=TCP SPT=1 DPT=2269 WINDOW=5840 RES=0x00 ACK URGP=0 Nov 8 10:44:09 jupiter kernel: BANDWIDTH_OUT:IN= OUT=eth0 SRC=212.200.101.26 DST=192.168.50.11 LEN=846 TOS=0x00 PREC=0x00 TTL=64 ID=9379 DF PROTO=TCP SPT=1 DPT=2269 WINDOW=5840 RES=0x00 ACK PSH URGP=0 Nov 8 10:44:09 jupiter kernel: BANDWIDTH_IN:IN=eth0 OUT= MAC=00:50:8b:ec:95:34:00:50:bf:13:6a:8a:08:00 SRC=192.168.50.11 DST=212.200.101.26 LEN=180 TOS=0x00 PREC=0x00 TTL=127 ID=20824 DF PROTO=TCP SPT=2269 DPT=1 WINDOW=64729 RES=0x00 ACK PSH URGP=0 Nov 8 10:44:09 jupiter kernel: BANDWIDTH_OUT:IN= OUT=eth0 SRC=212.200.101.26 DST=192.168.50.11 LEN=107 TOS=0x00 PREC=0x00 TTL=64 ID=9380 DF PROTO=TCP SPT=1 DPT=2269 WINDOW=5840 RES=0x00 ACK PSH URGP=0 Nov 8 10:44:09 jupiter kernel: BANDWIDTH_IN:IN=eth0 OUT= MAC=00:50:8b:ec:95:34:00:50:bf:13:6a:8a:08:00 SRC=192.168.50.11 DST=212.200.101.26 LEN=596 TOS=0x00 PREC=0x00 TTL=127 ID=20826 DF PROTO=TCP SPT=2269 DPT=1 WINDOW=64662 RES=0x00 ACK PSH URGP=0 Nov 8 10:44:09 jupiter kernel: BANDWIDTH_OUT:IN= OUT=eth0 SRC=212.200.101.26 DST=192.168.50.11 LEN=40 TOS=0x00 PREC=0x00 TTL=64 ID=9381 DF PROTO=TCP SPT=1 DPT=2269 WINDOW=6672 RES=0x00 ACK URGP=0 Nov 8 10:44:09 jupiter kernel: BANDWIDTH_OUT:IN= OUT=eth0 SRC=212.200.101.26 DST=192.168.50.11 LEN=92 TOS=0x00 PREC=0x00 TTL=64 ID=9382 DF PROTO=TCP SPT=1 DPT=2269 WINDOW=6672 RES=0x00 ACK PSH URGP=0 Nov 8 10:44:09 jupiter kernel: BANDWIDTH_IN:IN=eth0 OUT= MAC=00:50:8b:ec:95:34:00:50:bf:13:6a:8a:08:00 SRC=192.168.50.11 DST=212.200.101.26 LEN=40 TOS=0x00 PREC=0x00 TTL=127 ID=20829 DF PROTO=TCP SPT=2269 DPT=1 WINDOW=64610 RES=0x00 ACK URGP=0 Nov 8 10:44:09 jupiter kernel: BANDWIDTH_OUT:IN= OUT=eth0 SRC=212.200.101.26 DST=192.168.50.11 LEN=988 TOS=0x00 PREC=0x00 TTL=64 ID=9383 DF PROTO=TCP SPT=1 DPT=2269 WINDOW=6672 RES=0x00 ACK PSH URGP=0 Nov 8 10:44:09 jupiter kernel: BANDWIDTH_OUT:IN= OUT=eth0 SRC=212.200.101.26 DST=192.168.50.11 LEN=1500 TOS=0x00 PREC=0x00 TTL=64 ID=9384 DF PROTO=TCP SPT=1 DPT=2269 WINDOW=6672 RES=0x00 ACK URGP=0 Nov 8 10:44:09 jupiter kernel: BANDWIDTH_IN:IN=eth0 OUT= MAC=00:50:8b:ec:95:34:00:50:bf:13:6a:8a:08:00 SRC=192.168.50.11 DST=212.200.101.26 LEN=40 TOS=0x00 PREC=0x00 TTL=127 ID=20831 DF PROTO=TCP SPT=2269 DPT=1 WINDOW=65535 RES=0x00 ACK URGP=0 Nov 8 10:44:09 jupiter kernel: BANDWIDTH_OUT:IN= OUT=eth0 SRC=212.200.101.26 DST=192.168.50.11 LEN=343 TOS=0x00 PREC=0x00 TTL=64 ID=9385 DF PROTO=TCP SPT=1 DPT=2269 WINDOW=6672 RES=0x00 ACK PSH
Bug#397579: no sound in freeciv: unrecognized audio file format
Package: freeciv-client-gtk Version: 2.0.1-1sarge2 Sound does not work on freeciv. $ civclient -d 3 -P esd -S stdsounds (...) Audio File Library: '/usr/share/games/freeciv/stdsounds/foot3.ogg': unrecognized audio file format [error 0] 1: Fout bij bufferen fragment -1: confirm value != samples[].id (...) $ file '/usr/share/games/freeciv/stdsounds/foot3.ogg' /usr/share/games/freeciv/stdsounds/foot3.ogg: Ogg data, Vorbis audio, mono, 11025 Hz, ~29000 bps, created by: Xiph.Org libVorbis I (1.1.0 RC1) xmms plays this file without error. What's wrong and how do I get sound in freeciv? Debian 3.1r3 kernel 2.6.8-3-686-smp -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#318340: openoffice.org: broken dependency on amd64
Am Dienstag, 7. November 2006 19:03 schrieb brian jones: i'm having the same problem installing openoffice.org. this is debian-amd64 stable. ^^^ Which doesn't have OOo for amd64. And never will get. etch/sid have it. So this one is completely normal. Hint: openoffice.org was an Arch-indep package in sarge. Regards, Rene -- .''`. René Engelhard -- Debian GNU/Linux Developer : :' : http://www.debian.org | http://people.debian.org/~rene/ `. `' [EMAIL PROTECTED] | GnuPG-Key ID: 248AEB73 `- Fingerprint: 41FA F208 28D4 7CA5 19BB 7AD9 F859 90B0 248A EB73
Bug#349256: Debian Bug Tracking System [EMAIL PROTECTED]
You have followed up to an installation report that was already closed. In that case it is better to submit a new report. I Am sorry, it was my first time ;-) Comments/Problems: The last step kept repeating. It told me that I was done and the computer will reboot over and over again. Finally I had to do this myself... I have no idea what you mean here exactly. I don't understand what the exact problem is you see, and also not how you fixed it. Please give us exact messages or errors you see on the screen. Otherwise it is nearly impossible to identify the problem or to help. Cheers, FJP Well I will try to explain it a little closer. First of all I did an i386 installation afterwards and everything was okay. The problem occured only using the amd64 dist. On the screen it says: Take out your cdrom and press on next to reboot the computer or something like that. Thats what I did. After that it spipped back to the last step and the message appeared again. I was able to do that over and over again... Bottomline: The computer did not restart and I had to do a reset. The installation was fine. Hope that did help. mfg, Frank -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#379628: [Linux-NTFS-Dev] CALL FOR HELP: Vista beta compatibility testing (was: Re: Bug#379628: ntfsresize: resizing a Vista NTFS partition leads to corrupted partition)
Hi, On Wed, 8 Nov 2006, Andree Leidenfrost wrote: Thanks a lot for your response! Thanks for yours too! :) Ok, I've reinstalled and created a 10GB E: drive in Vista after that. Surprisingly enough (at least to me), after reducing the size by 1MB following your original instructions, Vista does not boot anymore either. :-( Interesting. I guess you've seen no error messages? We also shouldn't forget that this was an older beta release, so Vista bugs are expected. It would be nice to reproduce it on the latest Vista too. Unfortunately nobody could do it so far (that is no feedback). As a Debian developer, i.e. looking at things from a distribution angle, As an all time Linux developer, I'm looking at things from all distributions angle ;) I wrote ntfsresize for the purpose to be used in the Linux installers. I never used Windows myself. I do understand your problem ;) I am somewhat more concerned: Installing Linux on a PC should be as easy as possible. To this date, ntfsresize has done an excellent job in resizing an NTFS partition 'on the fly' as part of the Linux installation process. The problem is that Parted still has problems with editing the partition table. Corruptions still happen __sometimes__ in a way that Windows won't be able to boot. Not even when it's reinstalled (the Windows install respects the partition table, so it won't fix it). The Parted code is widely used in QTParted (unmaintained for years), GParted and several other partitioners. It keeps corrupting but isn't getting fixed. Very bad. Another problem is GRUB. It also tends to make Windows unbootable __sometimes__. GRUB seems to be also unmaintained for quite some time. So this repartitioning approach doesn't seem to work reliable, unfortunately. An alternative could be if users would install Linux straight to NTFS. Thus the unreliable partitioning (and hopefully the bootloader) could be eliminated completely. As an extra bonus, users would even have full read-write access to their Linux data, without any additional setup. Though this still needs some work on the NTFS side. It would be really sad to not have this functionality anymore. I think this would be the correct way to proceed: 1) reproduce the problem with the latest Vista Beta (afaik, RC2) 2) submit a bug report to Microsoft and ask for answer and workaround until they fix it 3) if Microsoft ignores or refuses the problem then make it a legal cases against them as anti-competitive practices. 4) try to find a solution until 3) settles down. Best regards, Szaka -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#397096: installation-report: hwclock error on ThinkPad T60
On Sunday 05 November 2006 07:08, Carlos Z.F. Liu wrote: Comments/Problems: My hardware clock was set to localtime (GMT+13). The system clock was always in wrong timezone because of above error. I can fix the problem by adding --directisa option to hwclock. This bug was discussed in debian-devel sometime ago and already have a solution. http://lists.debian.org/debian-devel/2006/07/msg00300.html Sounds like this is a known kernel issue and not something we can fix in the installer. If you want to follow up on this, please check for existing bug reports against the kernel or file a new one. Or possibly even better, check if the bug is already known with the upstream kernel developers. Closing your report as the installation was successful. Thanks for submitting the report. Cheers, FJP -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#364838: libxklavier: systematically kills GNOME session during login
On Wed, Nov 08, 2006, Roland Stigge wrote: Thanks for the note. Unfortunately, I can't confirm the bug as fixed. I missed the SONAME change and libxklavier was just not properly used (and therefore, couldn't make trouble). If you still get the crash, can you please valgrind it? You might want to rebuild libxklavier with debugging symbols. -- Loïc Minier [EMAIL PROTECTED]
Bug#397584: iproute-dev: ip_common.h references unknown symbols RTA_TABLE, RTA_DATA
Package: iproute-dev Version: 20061002-2 Severity: normal /usr/include/iproute/ip_common.h references unknown symbols RTA_TABLE and RTA_DATA, which prevents it from being used in other projects. Looks like it happened as a result of making rtm_get_table function inline. -- System Information: Debian Release: testing/unstable APT prefers testing APT policy: (990, 'testing') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.16-2-686 Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#397506: OpenOffice 2.0.4 (AMD64) dBASE table read not working
Am Dienstag, 7. November 2006 21:09 schrieb Gary Dale: package: OpenOffice.org version: 2.0.4-5 (AMD64) can you please put right stuff in it? a) the package name is openoffice.org, not OpenOffice.org b) (AMD64) doesn't belong in the version, it belongs in the info block, best is when you use reportbug which will insert that for you.. Whether I create a dBASE table (.dbf file) with an old version of dBASE, out of curiosity, which version? export it from Calc or Excel, or whatever, neither Calc nor Base can read it. However, dBASE and Excel can read it. I can also read the tables from OpenOffce v2 on a Windows XP (32 bit) machine. The problem is strictly with the table reading, not the writing. And with 2.0.4-5 on i386? Regards, Rene -- .''`. René Engelhard -- Debian GNU/Linux Developer : :' : http://www.debian.org | http://people.debian.org/~rene/ `. `' [EMAIL PROTECTED] | GnuPG-Key ID: 248AEB73 `- Fingerprint: 41FA F208 28D4 7CA5 19BB 7AD9 F859 90B0 248A EB73
Bug#397562: batik: FTBFS: should use sun-java5-* instead of j2sdk1.4
retitle 397562 batik: FTBFS: should use java-gcj-compat-dev instead of j2sdk1.4 thanks Whoever tries to fix this, please check first if it can be comiled with GCJ. Marcus -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#396869: democracyplayer: Should use less memory
forwarded 396869 https://develop.participatoryculture.org/democracy/ticket/4103 thanks On Fri, Nov 03, 2006 at 01:45:25PM +0100, Petter Reinholdtsen wrote: The democracyplayer application uses a lot of memory. Yes, unfortunately. I have reported this a while ago already. It's slowly getting better with every new release and upstream knows about it. There's work left to do, though... Uwe. -- http://www.hermann-uwe.de | http://www.holsham-traders.de http://www.crazy-hacks.org | http://www.unmaintained-free-software.org signature.asc Description: Digital signature
Bug#397575: cmucl: FTBFS: cp: cannot stat `src/docs/cmu-user/index.html': No such file or directory
On Wed, 8 Nov 2006 10:21:01 +0100, Lucas Nussbaum During a rebuild of all packages in etch, I discovered that your package failed to build on i386. This turns out to be hevea problem: hevea -fix cmu-user.hva cmu-user.tex ./cmu-user.hva:13: Warning: Not (re)-defining environment 'minipage' with \newenvironment ./cmu-user.hva:137: Warning: Unknown counter: footer in \setcounter Giving up command: [EMAIL PROTECTED] Giving up command: [EMAIL PROTECTED] Giving up command: \input Giving up command: \ifthenelse Giving up command: [EMAIL PROTECTED] Giving up command: [EMAIL PROTECTED] Giving up command: \@@iter Giving up command: [EMAIL PROTECTED] Giving up command: [EMAIL PROTECTED] Giving up command: [EMAIL PROTECTED] Giving up command: \usepackage /usr/share/hevea/xspace.hva:2: Fatal error: Command: \xspace defined at initialisation (if input is plain LaTeX, please report to [EMAIL PROTECTED]) Adios make[3]: *** [cmu-user.html] Error 2 I've seen a fix in upstream CVS and will investigate this. Groetjes, Peter -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#396304: libruby1.8: this is a problem of apt-listbugs, not only a libruby problem
Package: libruby1.8 Followup-For: Bug #396304 I think this bug is still related to apt-listbugs. The soap_use_proxy variable is an interface of a library used internally. apt-listbugs does not _have_to_ expose this interface to the user. apt-listbugs even sets or deletes this variable in some cases depending on the settings in apt.conf. This behaviour is inconsistent. IMHO apt-listbugs should behave like other APT tools. The manpage of apt.conf states http HTTP URIs; http::Proxy is the default http proxy to use. It is in the standard form of http://[[user][:[EMAIL PROTECTED]:port]/. Per host proxies can also be specified by using the form http::Proxy::host with the special keyword DIRECT meaning to use no proxies. The http_proxy environment variable will override all settings. So it's expected behaviour that variable http_proxy will be used without any questions or complaints from the programs. I'm aware of two possible security risks: The first is the use of user:password in the proxy URL. This is no problem if http_proxy does not contain a password. The second is the risk to unexpectedly override the settings from apt.conf with an untrusted proxy. I think this should be solved by a common solution for all apt related programs. Using a wrong proxy to list bug reports is a small problem compared to using this proxy to download packages. Please point me to an explanation if there is another security risk. Maybe we need a setting in apt.conf that tells APT to ignore http_proxy and use the settings from apt.conf only. This should apply to apt-listbugs as well. (like wget's --no-proxy option) I have the proxy setting in apt.conf, so aptitude and apt-listbugs work as expected if I dont have http_proxy set. But there are other programs that need the http_proxy environment variable. When I set this variable (in my case to the same proxy as in apt.conf) aptitude and apt-listchanges still work but apt-listbugs complains about the missing soap_use_proxy variable. If you like the idea of the soap_use_proxy variable, I propose to use a setting in apt.conf or a variable specific to apt-listbugs, to select from these possibilities: - use http_proxy (and set soap_use_proxy internally) - complain if http_proxy is set - complain if http_proxy is set and differs from the apt.conf setting (else set soap_use_proxy internally) - ignore http_proxy and use the setting from apt.conf (and set or remove http_proxy and soap_use_proxy internally as required) -- System Information: Debian Release: testing/unstable APT prefers testing APT policy: (900, 'testing'), (300, 'unstable'), (10, 'experimental') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.18-1-686 Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8) Versions of packages libruby1.8 depends on: ii libc62.3.6.ds1-7 GNU C Library: Shared libraries ii libncurses5 5.5-5 Shared libraries for terminal hand ii zlib1g 1:1.2.3-13 compression library - runtime libruby1.8 recommends no packages. -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#397587: hangs during exit
Package: tomboy Version: 0.4.1-2 Severity: important Hello ! I've just found out about tomboy and I wanted to try it. I fire it up, and quit, and it hangs there forever. It's waiting for some X11 reply, and doesn't get it... Here's a backtrace: (gdb) backtrace #0 0x2ae5f5438d06 in poll () from /lib/libc.so.6 #1 0x2ae5f4e695ae in g_main_context_check () from /usr/lib/libglib-2.0.so.0 #2 0x2ae5f4e69a46 in g_main_loop_run () from /usr/lib/libglib-2.0.so.0 #3 0x2be4c6b2 in gtk_main () from /usr/lib/libgtk-x11-2.0.so.0 #4 0x404ed08d in ?? () I set the severity to important as if I kill tomboy, when I start it again, no window is displayed. I need to remove the ~/.tomboy directory to see it again, but then I lose my notes... Pity ! Vincent Fourmond -- System Information: Debian Release: 4.0 APT prefers unstable APT policy: (500, 'unstable'), (500, 'testing') Architecture: amd64 (x86_64) Shell: /bin/sh linked to /bin/dash Kernel: Linux 2.6.18 Locale: LANG=en_GB, LC_CTYPE=en_GB (charmap=ISO-8859-1) (ignored: LC_ALL set to en_GB) Versions of packages tomboy depends on: ii gconf2 2.16.0-2 GNOME configuration database syste ii libart-2.0-2 2.3.17-1 Library of functions for 2D graphi ii libatk1.0-01.12.3-1 The ATK accessibility toolkit ii libc6 2.3.6.ds1-8 GNU C Library: Shared libraries ii libcairo2 1.2.4-4 The Cairo 2D vector graphics libra ii libdbus-1-30.94-1simple interprocess messaging syst ii libdbus-glib-1-2 0.71-2simple interprocess messaging syst ii libfontconfig1 2.4.1-2 generic font configuration library ii libgconf2.0-cil2.8.3-2 CLI binding for GConf 2.12 ii libglib2.0-0 2.12.4-1 The GLib library of C routines ii libglib2.0-cil 2.8.3-2 CLI binding for the GLib utility l ii libgmime2.2-cil2.2.3-1.3 CLI binding for the MIME library, ii libgnome2.0-cil2.8.3-2 CLI binding for GNOME 2.12 ii libgnomecanvas2-0 2.14.0-2 A powerful object-oriented display ii libgnomeprint2.2-0 2.12.1-6 The GNOME 2.2 print architecture - ii libgnomeprintui2.2-0 2.12.1-4 GNOME 2.2 print architecture User ii libgtk2.0-02.8.20-3 The GTK+ graphical user interface ii libgtk2.0-cil 2.8.3-2 CLI binding for the GTK+ toolkit 2 ii libgtkspell0 2.0.10-3+b1 a spell-checking addon for GTK's T ii libmono-corlib1.0-cil 1.1.18-3 Mono core library (1.0) ii libmono-system1.0-cil 1.1.18-3 Mono System libraries (1.0) ii libmono1.0-cil 1.1.18-3 Mono libraries (1.0) ii libpanel-applet2-0 2.14.3-2 library for GNOME 2 panel applets ii libpango1.0-0 1.14.7-1 Layout and rendering of internatio ii libx11-6 2:1.0.3-2 X11 client-side library ii libxcursor11.1.7-4 X cursor management library ii libxext6 1:1.0.1-2 X11 miscellaneous extension librar ii libxfixes3 1:4.0.1-4 X11 miscellaneous 'fixes' extensio ii libxi6 1:1.0.1-3 X11 Input extension library ii libxinerama1 1:1.0.1-4.1 X11 Xinerama extension library ii libxml22.6.27.dfsg-1 GNOME XML library ii libxrandr2 2:1.1.0.2-4 X11 RandR extension library ii libxrender11:0.9.1-3 X Rendering Extension client libra ii mono-runtime 1.1.18-3 Mono runtime ii zlib1g 1:1.2.3-13compression library - runtime tomboy recommends no packages. -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#397590: doesn't support forms
package: poppler version: 0.4.5-5 Hi, to be able to completly replace acrobat reader, poppler needs to support forms. Some example forms are availble at http://www.adobe.com/products/server/readerextensions/indepth.html regards, Holger pgpIDdiHAR596.pgp Description: PGP signature
Bug#364838: libxklavier: systematically kills GNOME session during login
Loïc Minier wrote: On Wed, Nov 08, 2006, Roland Stigge wrote: Thanks for the note. Unfortunately, I can't confirm the bug as fixed. I missed the SONAME change and libxklavier was just not properly used (and therefore, couldn't make trouble). If you still get the crash, can you please valgrind it? You might want to rebuild libxklavier with debugging symbols. Unfortunately, there are some problems with this: 1) It's a production system that I can't use much for debugging 2) It's quite restricted in resources (X server in a small LTSP terminal) 3) It's distributed: The libxklavier under consideration runs on an up to date sid machine while the X server is an older Xorg 6.7 from LTSP on a really small device without valgrind. A colleague of mine says this is related to http://sourceforge.net/tracker/index.php?func=detailaid=1421948group_id=319atid=200319 but I didn't have time to investigate the lengthy referenced bugzilla.g.o debate... :( bye, Roland
Bug#394792: Updating pgf to 1.09-1 breaks latex-beamer blocks
Cedric Blancher [EMAIL PROTECTED] wrote: Thank you for the nice example. I've handed it on to the upstream author. Also, please add \filelist $ latex file.tex [...] ! Undefined control sequence. l.1 \filelist It should have been \listfiles, but that's no longer important now. Regards, Frank -- Dr. Frank Küster Single Molecule Spectroscopy, Protein Folding @ Inst. f. Biochemie, Univ. Zürich Debian Developer (teTeX/TeXLive)
Bug#397588: gnucash: New account druid freezes when selecting currency
Package: gnucash Version: 2.0.2-2 Severity: important After launching the New Account Hierarchy Setup druid and proceeding to the currency selection screen, gnucash freezes when clicking the Forward button. Debug output follows. $ gnucash --debug gnucash: [D] starting up (1). gnucash: [D] handling command line arguments(gnucash) gnucash: [D] files to open: () gnucash: [D] (results (1.11 tsp vwd financecanada yahoo_nz australia usa troweprice amfiindia nasdaq usfedbonds bmonesbittburns aex_options yahoo_asia troweprice_direct tiaacref canada yahoo seb_funds yahoo_brasil fidelity greece dwsfunds yahoo_australia unionfunds asia indiamutual brasil asegr deka nyse canadamutual fidelity_direct asx fool tdwaterhouse trustnet ftportfolios_direct uk_unit_trusts dutch ftportfolios nzx tdefunds za aex_futures fundlibrary aex yahoo_europe nz vanguard europe platinum maninv)) gnucash: [M] Found Finance::Quote version 1.11 *** glibc detected *** double free or corruption (fasttop): 0x080bd8f8 *** -- System Information: Debian Release: 4.0 APT prefers unstable APT policy: (901, 'unstable'), (900, 'testing') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.18-rc4 Locale: LANG=en_GB, LC_CTYPE=en_GB (charmap=ISO-8859-1) Versions of packages gnucash depends on: ii g-wrap 1.9.6-3.1 scripting interface generator for ii gconf2 2.16.0-2 GNOME configuration database syste ii gnucash-common 2.0.2-2 A personal finance tracking progra ii guile-1.6-libs 1.6.8-6 Main Guile libraries ii guile-1.6-slib 1.6.8-6 Guile SLIB support ii guile-g-wrap 1.9.6-3.1 scripting interface generator for ii libart-2.0-2 2.3.17-1 Library of functions for 2D graphi ii libatk1.0-01.12.3-1 The ATK accessibility toolkit ii libaudiofile0 0.2.6-6 Open-source version of SGI's audio ii libavahi-client3 0.6.14-2 Avahi client library ii libavahi-common3 0.6.14-2 Avahi common library ii libavahi-glib1 0.6.14-2 Avahi glib integration library ii libbonobo2-0 2.14.0-2 Bonobo CORBA interfaces library ii libbonoboui2-0 2.14.0-5 The Bonobo UI library ii libc6 2.3.6.ds1-8 GNU C Library: Shared libraries ii libcairo2 1.2.4-4 The Cairo 2D vector graphics libra ii libcrypt-ssleay-perl 0.51-5Support for https protocol in LWP ii libdate-manip-perl 5.44-4a perl library for manipulating da ii libdbus-1-30.94-1simple interprocess messaging syst ii libesd00.2.36-3 Enlightened Sound Daemon - Shared ii libffi44.1.1-19 Foreign Function Interface library ii libfinance-quote-perl 1.11-0.1 Perl module for retrieving stock q ii libfontconfig1 2.4.1-2 generic font configuration library ii libfreetype6 2.2.1-5 FreeType 2 font engine, shared lib ii libgconf2-42.16.0-2 GNOME configuration database syste ii libgcrypt111.2.3-2 LGPL Crypto library - runtime libr ii libglade2-01:2.6.0-2 library to load .glade files at ru ii libglib2.0-0 2.12.4-1 The GLib library of C routines ii libgnome-keyring0 0.6.0-2 GNOME keyring services library ii libgnome2-02.16.0-2 The GNOME 2 library - runtime file ii libgnomecanvas2-0 2.14.0-2 A powerful object-oriented display ii libgnomeprint2.2-0 2.12.1-6 The GNOME 2.2 print architecture - ii libgnomeprintui2.2-0 2.12.1-4 GNOME 2.2 print architecture User ii libgnomeui-0 2.14.1-2 The GNOME 2 libraries (User Interf ii libgnomevfs2-0 2.14.2-3 GNOME virtual file-system (runtime ii libgnutls131.4.4-2 the GNU TLS library - runtime libr ii libgoffice-1-2 0.2.1-4 Document centric objects library - ii libgpg-error0 1.4-1 library for common error values an ii libgsf-1-114 1.14.2-1 Structured File Library - runtime ii libgsf-gnome-1-114 1.14.2-1 Structured File Library - runtime ii libgtk2.0-02.8.20-3 The GTK+ graphical user interface ii libgtkhtml3.8-15 3.12.1-2 HTML rendering/editing library - r ii libguile-ltdl-11.6.8-6 Guile's patched version of libtool ii libgwrap-runtime0 1.9.6-3.1 scripting interface generator for ii libice61:1.0.1-2 X11 Inter-Client Exchange library ii libjpeg62 6b-13 The Independent JPEG Group's JPEG ii libltdl3 1.5.22-4 A system independent dlopen wrappe ii libofx3
Bug#397589: texlive-latex-extra does not contain beamer
Package: texlive-latex-extra Version: 2005.dfsg.2-2 Severity: normal texlive-latex-extra claims to contain beamer, but does not. -- System Information: Debian Release: 4.0 APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.18-1-686 Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8) Versions of packages texlive-latex-extra depends on: ii preview-latex-style11.83-2.1 LaTeX style files for editor embed ii texlive-common 2005.dfsg.2-3 TeX Live: Base component ii texlive-latex-base 2005.dfsg.2-3 TeX Live: Basic LaTeX packages ii texlive-pictures 2005.dfsg.2-3 TeX Live: Drawing and graphing pac Versions of packages texlive-latex-extra recommends: pn texlive-generic-extra none(no description available) ii texlive-latex-recommended 2005.dfsg.2-3 TeX Live: LaTeX recommended packag pn texpower none(no description available) Versions of packages tex-common depends on: ii debconf [debconf-2.0] 1.5.8 Debian configuration management sy ii ucf 2.0016 Update Configuration File: preserv Versions of packages texlive-latex-extra is related to: pn tetex-basenone (no description available) pn tetex-bin none (no description available) pn tetex-extra none (no description available) -- debconf information: tex-common/check_texmf_wrong: tex-common/check_texmf_missing: tex-common/singleuser: false -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#397568: darcs-buildpackage: FTBFS: setup: darcs-buildpackage.cabal:10: Parse of field 'extensions' failed:
forcemerge 376509 397568 thanks On Wed, Nov 08, 2006 at 10:33:47AM +0100, Lucas Nussbaum wrote: Package: darcs-buildpackage Version: 0.5.7 Severity: serious Justification: FTBFS on i386, very likely to fail everywhere else Usertags: grid5000 During a rebuild of all packages in etch, I discovered that your package failed to build on i386. Relevant parts: /usr/bin/make make[1]: Entering directory `/build/root/darcs-buildpackage-0.5.7' ghc -package Cabal Setup.lhs -o setup ./setup configure setup: darcs-buildpackage.cabal:10: Parse of field 'extensions' failed: make[1]: *** [all] Error 1 make[1]: Leaving directory `/build/root/darcs-buildpackage-0.5.7' make: *** [build-stamp] Error 2 Duplicate of bug #376509, fixed in version 0.5.8; version 0.5.10 is in testing as of yesterday. Thanks, -- Steve Langasek Give me a lever long enough and a Free OS Debian Developer to set it on, and I can move the world. [EMAIL PROTECTED] http://www.debian.org/ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#397586: latest-data graphs malfunction after upgrade to 1.1.3
Package: zabbix-mysql-server Version: 1.1.3-1 Severity: Important as in topic, the following error may occur in unpatched version of zabbix. I've noticed zabbix 1.1.3-1 is unpatched and no bug report is filled against it yet. Full explanation and a fix here: http://www.zabbix.com/forum/showthread.php?t=4315highlight=triggers Regards, -- [: Patryk Dawidziuk ~~~ :] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#397494: using apt-cache a bad idea?
On Tue, 07 Nov 2006, Joey Hess wrote: The apt-cache code should only run if /usr/share/python/debian_defaults DNE; it's included in python-minimal. I wonder why Peter's system doesn't have it? python-central depends on python = 2.3. python-minimal was only introduced with python 2.4. Cheers, Peter -- | .''`. ** Debian GNU/Linux ** Peter Palfrader | : :' : The universal http://www.palfrader.org/ | `. `' Operating System | `-http://www.debian.org/ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#397591: problems linking with -lfl option
Subject: problems linking with -lfl option Package: flex-old Version: 2.5.4a-7 Severity: normal I have the following file: %option noyywrap %{ int voc,con; %} %% a|e|i|o|u voc++; [a-z] con++; . ; %% int main(){ yylex(); printf(voc: %3d con: %3d\n,voc,con); } just a simple example... if I do flex file.l; gcc lex.yy.c everything is ok, but if i remove the %option noyywrap directive, and do flex file.l; gcc -lfl lex.yy.c I get these errors: /tmp/ccgksxij.o: In function `main': lex.yy.c:(.text+0xfdd): multiple definition of `main' /usr/lib/gcc/i486-linux-gnu/4.1.2/../../../../lib/libfl.a(libmain.o):/home/srivasta/flex-old-2.5.4a/libmain.c:10: first defined here /usr/bin/ld: Warning: size of symbol `main' changed from 27 in /usr/lib/gcc/i486-linux-gnu/4.1.2/../../../../lib/libfl.a(libmain.o) to 62 in /tmp/ccgksxij.o /tmp/ccgksxij.o: In function `yylex': lex.yy.c:(.text+0x341): undefined reference to `yywrap' /tmp/ccgksxij.o: In function `input': lex.yy.c:(.text+0xaeb): undefined reference to `yywrap' collect2: ld returned 1 exit status I have the same problem with flex package. Greetings Paolo Pantaleo -- System Information: Debian Release: testing/unstable APT prefers testing APT policy: (800, 'testing'), (70, 'stable'), (60, 'unstable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.17-2-k7 Locale: LANG=it_IT.UTF-8, LC_CTYPE=it_IT.UTF-8 (charmap=UTF-8) Versions of packages flex-old depends on: ii libc62.3.6.ds1-7 GNU C Library: Shared libraries Versions of packages flex-old recommends: ii gcc [c-compiler] 4:4.1.1-13 The GNU C compiler ii gcc-4.0 [c-compiler] 4.0.3-3The GNU C compiler ii gcc-4.1 [c-compiler] 4.1.1-19 The GNU C compiler -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#397592: document max. length of boot parameters
Package: debian-installer-manual Section B.2.2 (Using boot parameters to supplement preseeding) notes that current kernels can accept a maximum of 32 command line options, but says nothing about a maximum number of characters on the kernel command line. There appears to be a 255 character maximum for parameters, after which the kernel command line is silently truncated. I have no idea if this is a limitation of the kernel, or of grub, but it should probably be noted along with the 32 parameter limit. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#397574: csmash: FTBFS: configure: error: OpenGL library not found.
On Wed, Nov 08, 2006 at 10:30:23AM +0100, Lucas Nussbaum wrote: During a rebuild of all packages in etch, I discovered that your package failed to build on i386. Relevant parts: checking for fabs in -lm... no checking for glLoadIdentity in -lGL... no checking for glLoadIdentity in -lMesaGL... no checking for main in -lOpenGL32... no configure: error: OpenGL library not found. make: *** [build-stamp] Error 1 This is fixed by adding a build-dependency on libxt-dev. (Lack of libxt-dev causes X detection to fail, which results in broken CFLAGS options being added to the compiler commandline.) Cheers, -- Steve Langasek Give me a lever long enough and a Free OS Debian Developer to set it on, and I can move the world. [EMAIL PROTECTED] http://www.debian.org/ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#397368: tuxguitar: tuxguitar fails to start
Hi Guitar Afficionados, Thanks for help, I'm posting again because everything is not fixed/clear yet. With the fixes below it works (at least in my environment). Here my resulting /usr/bin/tuxguitar and the reasoning for changes: * JAVA=... # As suggested by Julian * export CLASSPATH=... # As suggested by Philippe # N.B.: /usr/share/tuxguitar is important, # otherwise icons langs are not found. * removed `cd /usr/share/tuxguitar' which I didn't like anyway (the tool should honour my CWD) * changed $* to $@ for better quoting results (e.g. in files) Best regards and thanks again, Klaus /usr/bin/tuxguitar #! /bin/sh # Hardcode the JAVA version - should be reflected in the package # dependencies list JAVA=/usr/lib/jvm/java-1.5.0-sun/jre/bin/java # Setup classpath # !!! always add /usr/share/tuxguitar to find icons languages export CLASSPATH=/usr/share/tuxguitar/TuxGuitar.jar:/usr/share/java//swt-gtk-3.2.1.jar:/usr/share/java//itext.jar:/usr/share/java//gtk2.6.jar:/usr/share/tuxguitar $JAVA -Xms128m -Xmx128m \ -Djava.library.path=/usr/lib/jni \ -cp ${CLASSPATH} org.herac.tuxguitar.gui.TuxGuitar $@ /usr/bin/tuxguitar -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#397593: gaim crashes on irc when using cp1251 encoding (possibly other non-utf encodings too)
Package: gaim Version: 2.0.0+beta4-4 Severity: serious Gaim/IRC works just fine with Utf-8 encoding... But when I change encoding to cp1251 it crashes on topic change or writing text. Backtrace: 0xa74eb093 in writev () from /lib/tls/libc.so.6 (gdb) bt #0 0xa74eb093 in writev () from /lib/tls/libc.so.6 #1 0xa7f8311e in dbus_malloc () from /usr/lib/libdbus-1.so.3 #2 0xa7f83187 in dbus_malloc () from /usr/lib/libdbus-1.so.3 #3 0xa7f7b61b in dbus_threads_init_default () from /usr/lib/libdbus-1.so.3 #4 0xa7f7b891 in dbus_threads_init_default () from /usr/lib/libdbus-1.so.3 #5 0xa7f79e6c in dbus_threads_init_default () from /usr/lib/libdbus-1.so.3 #6 0xa7f655db in dbus_connection_set_watch_functions () from /usr/lib/libdbus-1.so.3 #7 0xa7f6569b in dbus_connection_set_watch_functions () from /usr/lib/libdbus-1.so.3 #8 0xa7f66f86 in dbus_connection_send_with_reply_and_block () from /usr/lib/libdbus-1.so.3 #9 0xa7f66fd7 in dbus_connection_send_with_reply_and_block () from /usr/lib/libdbus-1.so.3 #10 0xa7f6705a in dbus_connection_send () from /usr/lib/libdbus-1.so.3 #11 0xa76163b4 in gaim_dbus_signal_emit_gaim () from /usr/lib/libgaim.so.0 #12 0xa75e9bdb in gaim_signal_emit_vargs () from /usr/lib/libgaim.so.0 #13 0xa75e9cec in gaim_signal_emit () from /usr/lib/libgaim.so.0 #14 0xa75e806a in serv_got_chat_in () from /usr/lib/libgaim.so.0 #15 0xa6fbe7c1 in ?? () from /usr/lib/gaim/libirc.so #16 0x083b9098 in ?? () #17 0x0001 in ?? () #18 0x083b8f30 in ?? () #19 0x in ?? () -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#394792: Updating pgf to 1.09-1 breaks latex-beamer blocks
Le mercredi 08 novembre 2006 à 11:49 +0100, Frank Küster a écrit : It should have been \listfiles, but that's no longer important now. Oups. However, here it is with pgf 1.01.dfsg.1-1: *File List* beamer.cls2005/10/23 cvs version 3.06 A class for typesetting presentations (rcs-revision 1.67) beamerbasercs.sty2004/10/07 (rcs-revision 1.3) beamerbasemodes.sty2004/12/09 (rcs-revision 1.21) beamerbasedecode.sty2005/05/09 (rcs-revision 1.18) beamerbaseoptions.sty2004/11/15 (rcs-revision 1.7) keyval.sty1999/03/16 v1.13 key=value parser (DPC) pgfcore.sty2005/10/25 v1.01 (rcs-revision 1.3) graphicx.sty1999/02/16 v1.0f Enhanced LaTeX Graphics (DPC,SPQR) graphics.sty2001/07/07 v1.0n Standard LaTeX Graphics (DPC,SPQR) trig.sty1999/03/16 v1.09 sin cos tan (DPC) graphics.cfg2005/02/03 v1.3 graphics configuration of teTeX/TeXLive dvips.def1999/02/16 v3.0i Driver-dependant file (DPC,SPQR) pgfsys.sty2005/10/18 v1.01 (rcs-revision 1.9) pgfrcs.sty2005/11/14 v1.01 (rcs-revision 1.8) pgfrcs.code.tex pgfsys.code.tex pgfsys-dvips.def2005/10/25 (rcs-revision 1.10) pgfsyssoftpath.code.tex2005/06/29 (rcs-revision 1.1.1.1) pgfsysprotocol.code.tex2005/06/29 (rcs-revision 1.1.1.1) xcolor.sty2005/12/21 v2.09 LaTeX color extensions (UK) color.cfg2005/02/03 v1.3 color configuration of teTeX/TeXLive pgfcore.code.tex pgfbaseimage.sty2005/07/06 v1.01 (rcs-revision 1.2) pgfbaseimage.code.tex xxcolor.sty2003/10/24 ver 0.1 amssymb.sty2002/01/22 v2.2d amsfonts.sty2001/10/25 v2.2f geometry.sty2002/07/08 v3.2 Page Geometry geometry.cfg hyperref.sty2003/11/30 v6.74m Hypertext links for LaTeX pd1enc.def2003/11/30 v6.74m Hyperref: PDFDocEncoding definition (HO) hyperref.cfg2002/06/06 v1.2 hyperref configuration of TeXLive and teTeX url.sty2004/03/15 ver 3.1 Verb mode for urls, etc. hdvips.def2003/11/30 v6.74m Hyperref driver for dvips pdfmark.def2003/11/30 v6.74m Hyperref definitions for pdfmark specials size11.clo2004/02/16 v1.4f Standard LaTeX file (size option) beamerbasecompatibility.sty2005/01/25 (rcs-revision 1.60) beamerbasefont.sty2005/05/17 (rcs-revision 1.15) beamerbasemisc.sty2005/05/17 (rcs-revision 1.23) beamerbasetwoscreens.sty2005/10/14 (rcs-revision 1.6) beamerbaseoverlay.sty2005/05/18 (rcs-revision 1.49) beamerbasetitle.sty2005/10/23 (rcs-revision 1.23) beamerbasesection.sty2005/04/20 (rcs-revision 1.18) beamerbaseframe.sty2005/06/02 (rcs-revision 1.58) beamerbaseverbatim.sty2005/04/12 (rcs-revision 1.6) beamerbaseframesize.sty2005/06/09 (rcs-revision 1.17) beamerbaseframecomponents.sty2004/11/08 (rcs-revision 1.40) beamerbasecolor.sty2005/01/25 (rcs-revision 1.41) beamerbasenotes.sty2005/10/14 (rcs-revision 1.22) beamerbasetoc.sty2004/12/09 (rcs-revision 1.20) beamerbasetemplates.sty2004/10/07 (rcs-revision 1.50) beamerbaseauxtemplates.sty2005/06/09 (rcs-revision 1.27) beamerbaseboxes.sty2005/06/09 (rcs-revision 1.28) beamerbaselocalstructure.sty2005/04/20 (rcs-revision 1.51) enumerate.sty1999/03/05 v3.00 enumerate extensions (DPC) beamerbasenavigation.sty2005/06/01 (rcs-revision 1.34) beamerbasetheorems.sty2005/04/04 (rcs-revision 1.7) amsmath.sty2000/07/18 v2.13 AMS math features amstext.sty2000/06/29 v2.01 amsgen.sty1999/11/30 v2.0 amsbsy.sty1999/11/29 v1.2d amsopn.sty1999/12/14 v2.01 operator names amsthm.sty2004/08/06 v2.20 beamerbasethemes.sty2004/10/07 (rcs-revision 1.9) beamerthemedefault.sty2004/10/07 (rcs-revision 1.6) beamerfontthemedefault.sty2005/03/15 (rcs-revision 1.12) beamercolorthemedefault.sty2005/03/15 (rcs-revision 1.27) beamerinnerthemedefault.sty2005/06/17 (rcs-revision 1.19) beamerouterthemedefault.sty2005/06/09 (rcs-revision 1.13) beamerthemeWarsaw.sty2004/10/07 (rcs-revision 1.8) beamerinnerthemerounded.sty2004/10/07 (rcs-revision 1.4) beamerouterthemeshadow.sty2005/06/01 (rcs-revision 1.8) beamerouterthemesplit.sty2004/10/07 (rcs-revision 1.4) beamercolorthemeorchid.sty2004/10/07 (rcs-revision 1.2) beamercolorthemewhale.sty2004/10/07 (rcs-revision 1.3) nameref.sty2003/12/03 v2.21 Cross-referencing by name of section *** and with pgf 1.09-1: *File List* beamer.cls2005/10/23 cvs version 3.06 A class for typesetting presentations (rcs-revision 1.67) beamerbasercs.sty2004/10/07 (rcs-revision 1.3) beamerbasemodes.sty2004/12/09 (rcs-revision 1.21) beamerbasedecode.sty2005/05/09 (rcs-revision 1.18) beamerbaseoptions.sty2004/11/15 (rcs-revision 1.7) keyval.sty1999/03/16 v1.13 key=value parser (DPC) pgfcore.sty2006/10/11 v1.09 (rcs-revision 1.4) graphicx.sty1999/02/16 v1.0f Enhanced LaTeX Graphics (DPC,SPQR) graphics.sty2001/07/07 v1.0n Standard LaTeX Graphics (DPC,SPQR) trig.sty
Bug#394097: libapache2-mod-auth-pam: doesnt work with Apache 2.1
Hallo, Robbert! On Tue, 7 Nov 2006 13:00:14 +0100 (CET) Robbert Kouprie [EMAIL PROTECTED] wrote: Please try adding AuthBasicAuthoritative Off to your configuration. My complete config is: Directory /var/www/protected AuthType Basic AuthName Please login AuthPAM_Enabled on AuthPAM_FallThrough off AuthBasicAuthoritative off require valid-user /Directory Does not work for me. I get: [Wed Nov 08 12:34:20 2006] [error] [client 192.168.250.2] No Authn provider configured [Wed Nov 08 12:34:20 2006] [crit] [client 192.168.250.2] configuration error: couldn't check access. No groups file?: / As I understand the documentation this is the expected behaviour, as libapache2-auth-pam does not include an Apache2.2-style authn provider. I only wonder how you still have it working... :-) Mit schönem Gruß - Thomas -- Mit der Rückkehr völliger Geistesabwesenheit ist wohl die absolute Genesung garantiert. - Lawrence Durrell, Nunquam /* PGP key auf Wunsch per e-mail || PGP key sent on request */
Bug#397594: dia: Dia not on KDE Graphics menu
Package: dia Version: 0.95.0-4.1+b1 Severity: normal Dia should appear on the KDE Graphics menu, but it is not there. -- System Information: Debian Release: testing/unstable APT prefers testing APT policy: (990, 'testing'), (500, 'unstable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.17-2-686 Locale: LANG=en_US, LC_CTYPE=en_US (charmap=ISO-8859-1) Versions of packages dia depends on: ii dia-common 0.95.0-4.1Diagram editor (common files) ii dia-libs 0.95.0-4.1+b1 Diagram editor (library files) ii libart-2.0-2 2.3.17-1 Library of functions for 2D graphi ii libatk1.0-01.12.3-1 The ATK accessibility toolkit ii libc6 2.3.6.ds1-7 GNU C Library: Shared libraries ii libcairo2 1.2.4-4 The Cairo 2D vector graphics libra ii libfontconfig1 2.4.1-2 generic font configuration library ii libfreetype6 2.2.1-5 FreeType 2 font engine, shared lib ii libglib2.0-0 2.12.4-1 The GLib library of C routines ii libgtk2.0-02.8.20-3 The GTK+ graphical user interface ii libice61:1.0.1-2 X11 Inter-Client Exchange library ii libpango1.0-0 1.14.7-1 Layout and rendering of internatio ii libpng12-0 1.2.8rel-7PNG library - runtime ii libpopt0 1.10-3lib for parsing cmdline parameters ii libsm6 1:1.0.1-3 X11 Session Management library ii libx11-6 2:1.0.3-2 X11 client-side library ii libxcursor11.1.7-4 X cursor management library ii libxext6 1:1.0.1-2 X11 miscellaneous extension librar ii libxfixes3 1:4.0.1-4 X11 miscellaneous 'fixes' extensio ii libxi6 1:1.0.1-3 X11 Input extension library ii libxinerama1 1:1.0.1-4.1 X11 Xinerama extension library ii libxml22.6.27.dfsg-1 GNOME XML library ii libxrandr2 2:1.1.0.2-4 X11 RandR extension library ii libxrender11:0.9.1-3 X Rendering Extension client libra ii zlib1g 1:1.2.3-13compression library - runtime Versions of packages dia recommends: ii gsfonts-x11 0.20 Make Ghostscript fonts available t -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#379628: [Linux-NTFS-Dev] CALL FOR HELP: Vista beta compatibility testing (was: Re: Bug#379628: ntfsresize: resizing a Vista NTFS partition leads to corrupted partition)
On Wed, 8 Nov 2006, Frans Pop wrote: On Sunday 05 November 2006 23:57, Szakacsits Szabolcs wrote: So, it seems we should plan and implement denial of the resizing for Vista, asap. This is not so bad, because Vista started to include a non-destructive resizer. Well, it is a pity that we will no longer be able to resize partitions from within the Debian installer. However, I guess that this will be a temporary denial until someone has figured out what would need to be changed to make the Vista boot working again. Yes. Microsoft could, well, should answer this, unless they fix or already fixed their boot process. Frans, how do you detect Vista? My idea is to check for the transactional directory. However this won't be enabled by default, so it may not exist at all. We currently check for the presence two files: /bootmgr and /Boot/BCD I'm afraid this is not ok for data partitions, which seemingly also have the same problem. I suppose data partitions don't have the above two files, do they? Regards, Szaka -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#397595: gpm crashed by start
Package: gpm Version: 1.19.6-19sarge1 Severity: normal -- System Information Debian Release: 3.1 Kernel Version: Linux michelle1.private 2.4.27-2-386 #1 Wed Aug 17 09:33:35 UTC 2005 i686 GNU/Linux Versions of the packages gpm depends on: ii debconf1.4.30.13 Debian configuration management system ii debianutils2.8.4 Miscellaneous utilities specific to Debian ii libc6 2.3.2.ds1-22 GNU C Library: Shared libraries and Timezone ii libncurses55.4-4 Shared libraries for terminal handling ii ucf1.17 Update Configuration File: preserves user ch debconf Version: 1.4.30.13 (Provides virtual package debconf-2.0) ii debconf1.4.30.13 Debian configuration management system ^^^ (Provides virtual package debconf-2.0) Hello, since I have gotten no respons from the BTS I send this bugreport again. I have started gpm with /etc/init.d/gpm strace and gotten execve(/usr/sbin/gpm, [/usr/sbin/gpm, -V, -D, -e, -m, /dev/psaux, -t, ps2, -Rraw], [/* 14 vars */]) = 0 uname({sys=Linux, node=tp570.private, ...}) = 0 0.21 brk(0) = 0x805c9e0 0.14 old_mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x40017000 0.21 access(/etc/ld.so.nohwcap, F_OK) = -1 ENOENT (No such file or directory) 0.29 open(/etc/ld.so.preload, O_RDONLY)= -1 ENOENT (No such file or directory) 0.27 open(/etc/ld.so.cache, O_RDONLY) = 3 0.29 fstat64(3, {st_mode=S_IFREG|0644, st_size=19157, ...}) = 0 0.15 old_mmap(NULL, 19157, PROT_READ, MAP_PRIVATE, 3, 0) = 0x40018000 0.34 close(3)= 0 0.14 access(/etc/ld.so.nohwcap, F_OK) = -1 ENOENT (No such file or directory) 0.22 open(/lib/libncurses.so.5, O_RDONLY) = 3 0.49 read(3, ELFF??..., 512) = 512 0.36 fstat64(3, {st_mode=S_IFREG|0644, st_size=252592, ...}) = 0 0.14 old_mmap(NULL, 257868, PROT_READ|PROT_EXEC, MAP_PRIVATE, 3, 0) = 0x4001d000 0.21 old_mmap(0x40053000, 36864, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED, 3, 0x35000) = 0x40053000 0.29 close(3)= 0 0.14 access(/etc/ld.so.nohwcap, F_OK) = -1 ENOENT (No such file or directory) 0.23 open(/lib/libc.so.6, O_RDONLY)= 3 0.43 read(3, ELFL?^?..., 512) = 512 0.31 fstat64(3, {st_mode=S_IFREG|0755, st_size=1244752, ...}) = 0 0.14 old_mmap(NULL, 1254916, PROT_READ|PROT_EXEC, MAP_PRIVATE, 3, 0) = 0x4005c000 0.18 old_mmap(0x40184000, 32768, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED, 3, 0x127000) = 0x40184000 0.25 old_mmap(0x4018c000, 9732, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x4018c000 0.25 close(3)= 0 0.13 munmap(0x40018000, 19157) = 0 0.37 stat64(/dev/vc/0, 0xbb5c) = -1 ENOENT (No such file or directory) 0.33 stat64(/dev/tty0, {st_mode=S_IFCHR|0600, st_rdev=makedev(4, 0), ...}) = 0 0.25 brk(0) = 0x805c9e0 0.14 brk(0x807d9e0) = 0x807d9e0 0.20 brk(0) = 0x807d9e0 0.12 brk(0x807e000) = 0x807e000 0.13 open(/var/run/gpm.pid, O_RDONLY) = -1 ENOENT (No such file or directory) 0.30 brk(0) = 0x807e000 0.13 brk(0) = 0x807e000 0.12 brk(0x807d000) = 0x807d000 0.23 brk(0) = 0x807d000 0.13 open(/dev/tty0, O_WRONLY) = 3 0.50 ioctl(3, TIOCLINUX, 0x8059240) = 0 0.22 close(3)= 0 0.25 mknod(/dev/gpmdata, S_IFIFO|0666) = -1 EEXIST (File exists) 0.25 open(/dev/gpmdata, O_RDWR|O_NONBLOCK) = 3 0.33 geteuid32() = 0 0.12 open(/dev/psaux, O_RDWR|O_NONBLOCK) = 4 0.007055 fcntl64(4, F_GETFL) = 0x802 (flags O_RDWR|O_NONBLOCK) 0.15 fcntl64(4, F_SETFL, O_RDWR) = 0 0.14 ioctl(4, TCFLSH, 0x2) = -1 ENOTTY (Inappropriate ioctl for device) 0.13 alarm(5)= 0 0.17 write(4, ?, 1) = 1 0.001022 alarm(0)= 5 0.15 nanosleep({0, 5000}, NULL) = 0 0.050200 alarm(5)= 0 0.14 read(4, 0xba30, 1) = ? ERESTARTSYS (To be restarted) 4.999781 --- SIGALRM (Alarm clock) @ 0 (0) --- +++ killed by SIGALRM +++ [ '/etc/gpm.conf' ]- device=/dev/psaux responsiveness= repeat_type=raw type=ps2 append='' sample_rate= The Version from Woody is working perfectly. Thanks, Greetings
Bug#383738: ppscsi-source: Patch for this and new 2.6.18 problem
tags 383738 +patch thanks Hi, First I ran into a problem that scsi_request is no longer available in 2.6.18. Fortunately it isn't used in the module, so just removing types from the header files fixed that. Than I ran into the problem of this bug, so I patched that as well. Attached is the resulting .tar.bz2 file, which works when it is put in /usr/src. The package source looked a bit too complicated to see at a glance where to change it, but I suppose that should be easy for the maintainer. The changes I made are in modules/ppscsi/{scsi,scsi_typedefs,ppscsi}.h (which can of course be easily seen with diff -urp on the unpacked original and modified tarballs.) Thanks, Bas -- I encourage people to send encrypted e-mail (see http://www.gnupg.org). If you have problems reading my e-mail, use a better reader. Please send the central message of e-mails as plain text in the message body, not as HTML and definitely not as MS Word. Please do not use the MS Word format for attachments either. For more information, see http://pcbcn10.phys.rug.nl/e-mail.html signature.asc Description: Digital signature
Bug#397586: latest-data graphs malfunction after upgrade to 1.1.3
hi Patryk, On Wed, Nov 08, 2006 at 11:34:04AM +0100, Patryk Dawidziuk wrote: Package: zabbix-mysql-server Version: 1.1.3-1 Severity: Important as in topic, the following error may occur in unpatched version of zabbix. I've noticed zabbix 1.1.3-1 is unpatched and no bug report is filled against it yet. Full explanation and a fix here: http://www.zabbix.com/forum/showthread.php?t=4315highlight=triggers the debian does contain a fix for this issue, are you sure this bug is present in latest 1.1.3 packages in unstable? debian/patches/07_zabbix-delta.dpatch: #! /bin/sh /usr/share/dpatch/dpatch-run ## 99-unnamed.dpatch by [EMAIL PROTECTED] ## Fix delta problem, see: http://www.zabbix.com/forum/showthread.php?t=4315 @DPATCH@ diff -ruN zabbix-1.1.3.orig/src/zabbix_server/functions.c zabbix-1.1.3/src/zabbix_server/functions.c --- zabbix-1.1.3.orig/src/zabbix_server/functions.c 2006-10-24 14:11:18.237095056 +0600 +++ zabbix-1.1.3/src/zabbix_server/functions.c 2006-10-24 14:13:38.901710784 +0600 @@ -678,7 +678,7 @@ value_double= 0; /* Required for nodata() */ - item-lastclock = now; + /* item-lastclock = now; */ if(value-type AR_UINT64) { @@ -803,6 +803,8 @@ DBexecute(sql); } + item-lastclock = now; + return ret; } bye, - michael -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#397589: texlive-latex-extra does not contain beamer
Michael Piefel [EMAIL PROTECTED] wrote: Package: texlive-latex-extra Version: 2005.dfsg.2-2 Severity: normal texlive-latex-extra claims to contain beamer, but does not. Ah, interesting. It's texlive-latex-recommended that Recommends: latex-beamer. One part of the fix is going to be: --- tpm2deb.cfg (Revision 1941) +++ tpm2deb.cfg (Arbeitskopie) @@ -529,7 +529,7 @@ blacklist;tpm;pgf;* depends;texlive-full;pgf (= 1.01.dfsg.1-1), latex-beamer (= 3.06.dfsg.1-0.1), latex-xcolor (= 2.09-1) recommends;texlive-pictures;pgf (= 1.01.dfsg.1-1) -recommends;texlive-latex-recommended;latex-beamer (= 3.06.dfsg.1-0.1) +recommends;texlive-latex-extra;latex-beamer (= 3.06.dfsg.1-0.1) recommends;texlive-latex-recommended;latex-xcolor (= 2.09-1) # # rcs-latex However, this won't solve the real problem. xcolor is in collection-latexrecommended.tpm, blacklisted, and texlive-latex-recommended Recommends: latex-xcolor. Still, the description of texlive-latex-recommended mentions xcolor. This requires a fix to tpm2deb.pl, I'll have a look. Thanks for reporting, Frank -- Dr. Frank Küster Single Molecule Spectroscopy, Protein Folding @ Inst. f. Biochemie, Univ. Zürich Debian Developer (teTeX/TeXLive)
Bug#289514: Announce of the upcoming NMU for the zope-zwiki package
Christian Perrier skrev: Dear maintainer of zope-zwiki and Debian translators, On 31 Oct 2006 I sent a notice to the maintainer of the zope-zwiki Debian package, mentioning the status of at least one old po-debconf translation update in the BTS (bug #289514). Here is the updated Swedish translation for zope-zwiki Regards, Daniel # #Translators, if you are not familiar with the PO format, gettext #documentation is worth reading, especially sections dedicated to #this format, e.g. by running: # info -n '(gettext)PO Files' # info -n '(gettext)Header Entry' # #Some information specific to po-debconf are available at #/usr/share/doc/po-debconf/README-trans # or http://www.debian.org/intl/l10n/po-debconf/README-trans # #Developers do not need to manually edit POT or PO files. # msgid msgstr Project-Id-Version: zope-zwiki\n Report-Msgid-Bugs-To: \n POT-Creation-Date: 2006-11-07 18:48+0100\n PO-Revision-Date: 2006-11-08 13:02+0100\n Last-Translator: Daniel Nylander [EMAIL PROTECTED]\n Language-Team: Swedish [EMAIL PROTECTED]\n MIME-Version: 1.0\n Content-Type: text/plain; charset=utf-8\n Content-Transfer-Encoding: 8bit\n #. Type: select #. Choices #: ../zope-zwiki.templates:1001 msgid configuring, end, manually msgstr konfigurering, slutet, manuellt #. Type: select #. Description #: ../zope-zwiki.templates:1002 msgid When do you like to restart Zope? msgstr När vill du starta om Zope? #. Type: select #. Description #: ../zope-zwiki.templates:1002 msgid Zope has an extensible, object oriented structure that allows you to easily add extra components (products) or features. Each product or feature can usually be found in packages whose name starts with `zope-' prefix. Unfortunately, Zope needs to restart to use any new add-on. Here you can choose a common way to restart Zope:\n * configuring: each product will restart Zope while configuring.\n * end: Zope will restart only once at the end of the whole\n installation/upgrading process.\n * manually: You will have to restart Zope. msgstr Zope har en utökningsbar, objektorienterad struktur som enkelt låter dig lägga till extra komponenter (produkter) eller funktioner. Varje produkt eller funktion kan hittas i paket vars namn börjar med \zope-\. Tyvärr, behöver Zope startas om för att använda de nya tilläggen. Här kan du välja ett standardsätt att starta om Zope på:\n * konfigurering: varje produkt kommer att starta om Zope vid konfiguring.\n * slutet: Zope kommer endast att startas om vid slutet av hela\n installations-/uppgraderingsprocessen.\n * manuellt: Du behöver starta om Zope manuellt.
Bug#387658: bittornado: Still affects non-curses btlaunchmany
Package: bittornado Version: 0.3.15-4 Followup-For: Bug #387658 -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 This bug seems to be affecting the non-curses version of btlaunchmany (i.e. /usr/bin/btlaunchmany). The only way to exit this application seems to be a SIGTERM, which apparently doesn't let the shutdown call be reached. I don't use the curses version, as the whole point for me of using bittornado is that I can leave it running unattended on a headless server. Unfortunately I'm not versed in Python system programming to the level where I can suggest a solution or supply a patch. Maybe it can trap the signal and start a clean cleanup? - -- System Information: Debian Release: 4.0 APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.18.1-ck1 Locale: LANG=es_AR.UTF-8, LC_CTYPE=es_AR.UTF-8 (charmap=UTF-8) -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.5 (GNU/Linux) iD8DBQFFUcrI823633cP2P8RAibBAKCQjjtAPA/pUzVa8aWzRuqYAlmmLQCfVi/r ylKMygf95LYKc3SyYOXOc9U= =ANR/ -END PGP SIGNATURE- -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#397596: posh: $POSH_VERSION contains 0.3.18 for version 0.5
Package: posh Version: 0.5 Severity: minor $ env -i posh -c set | grep -i VER POSH_VERSION=0.3.18 BTW, the man page talks about $SH_VERSION, not $POSH_VERSION. -- System Information: Debian Release: 4.0 APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.19-rc4 Locale: LANG=en_GB.ISO-8859-15, LC_CTYPE=en_GB.ISO-8859-15 (charmap=ISO-8859-15) Versions of packages posh depends on: ii debconf [debconf-2.0]1.5.8 Debian configuration management sy ii libc62.3.6.ds1-7 GNU C Library: Shared libraries posh recommends no packages. -- debconf information: posh/sh: false -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#397310: apache2.2 breaks working authentication
Hi, Been bit by this as well. The solution was to enable authz_user module. apache2.2 postinst should take in account the breaking^Wrefactoring of authentication and load equilavent modules for apahe2.2. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#397598: (no subject)
Package: installation-reports Boot method: How did you boot the installer? CD? floppy? network? CD Image version: Full URL to image you downloaded is best Debian GNU/Linux testing Etch - Official Snapshot i386 Binary-1 (20061102) Date: Date and time of the install Machine: Description of machine (eg, IBM Thinkpad R32) Acer Aspire 1362LC Processor: model : 8 model name : Mobile AMD Sempron(tm) Processor 2800+ stepping: 2 cpu MHz : 1600.924 cache size : 256 KB Memory:256(+512) Partitions: df -Tl will do; the raw partition table is preferred Tied.järj. Tyyppi 1K-lohkot Käytetty Vapaana Käy% Liitospiste /dev/hda1 ext336859272 5255960 29730940 16% / udev tmpfs 1024056 10184 1% /dev devshm tmpfs 355492 0355492 0% /dev/shm /dev/hdc iso9660 130864130864 0 100% /media/cdrom0 Output of lspci -nn and lspci -vnn: 00:00.0 Host bridge [0600]: VIA Technologies, Inc. K8M800 Host Bridge [1106:0204] 00:00.1 Host bridge [0600]: VIA Technologies, Inc. K8M800 Host Bridge [1106:1204] 00:00.2 Host bridge [0600]: VIA Technologies, Inc. K8M800 Host Bridge [1106:2204] 00:00.3 Host bridge [0600]: VIA Technologies, Inc. K8M800 Host Bridge [1106:3204] 00:00.4 Host bridge [0600]: VIA Technologies, Inc. K8M800 Host Bridge [1106:4204] 00:00.7 Host bridge [0600]: VIA Technologies, Inc. K8M800 Host Bridge [1106:7204] 00:01.0 PCI bridge [0604]: VIA Technologies, Inc. VT8237 PCI bridge [K8T800/K8T890 South] [1106:b188] 00:0b.0 CardBus bridge [0607]: Texas Instruments PCI7420 CardBus Controller [104c:ac8e] 00:0b.1 CardBus bridge [0607]: Texas Instruments PCI7420 CardBus Controller [104c:ac8e] 00:0b.2 FireWire (IEEE 1394) [0c00]: Texas Instruments PCI7x20 1394a-2000 OHCI Two-Port PHY/Link-Layer Controller [104c:802e] 00:10.0 USB Controller [0c03]: VIA Technologies, Inc. VT82x UHCI USB 1.1 Controller [1106:3038] (rev 80) 00:10.1 USB Controller [0c03]: VIA Technologies, Inc. VT82x UHCI USB 1.1 Controller [1106:3038] (rev 80) 00:10.2 USB Controller [0c03]: VIA Technologies, Inc. VT82x UHCI USB 1.1 Controller [1106:3038] (rev 80) 00:10.3 USB Controller [0c03]: VIA Technologies, Inc. USB 2.0 [1106:3104] (rev 82) 00:11.0 ISA bridge [0601]: VIA Technologies, Inc. VT8235 ISA Bridge [1106:3177] 00:11.1 IDE interface [0101]: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE [1106:0571] (rev 06) 00:11.5 Multimedia audio controller [0401]: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller [1106:3059] (rev 50) 00:11.6 Communication controller [0780]: VIA Technologies, Inc. AC'97 Modem Controller [1106:3068] (rev 80) 00:12.0 Ethernet controller [0200]: VIA Technologies, Inc. VT6102 [Rhine-II] [1106:3065] (rev 74) 00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100] 00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101] 00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102] 00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103] 01:00.0 VGA compatible controller [0300]: VIA Technologies, Inc. S3 Unichrome Pro VGA Adapter [1106:3108] (rev 01) 00:00.0 Host bridge [0600]: VIA Technologies, Inc. K8M800 Host Bridge [1106:0204] Subsystem: Acer Incorporated [ALI] Unknown device [1025:006e] Flags: bus master, 66MHz, medium devsel, latency 8 Memory at e000 (32-bit, prefetchable) [size=256M] Capabilities: [80] AGP version 3.0 Capabilities: [50] Power Management version 2 Capabilities: [60] HyperTransport: Slave or Primary Interface Capabilities: [58] HyperTransport: Interrupt Discovery and Configuration 00:00.1 Host bridge [0600]: VIA Technologies, Inc. K8M800 Host Bridge [1106:1204] Flags: bus master, medium devsel, latency 0 00:00.2 Host bridge [0600]: VIA Technologies, Inc. K8M800 Host Bridge [1106:2204] Flags: bus master, medium devsel, latency 0 00:00.3 Host bridge [0600]: VIA Technologies, Inc. K8M800 Host Bridge [1106:3204] Flags: bus master, medium devsel, latency 0 00:00.4 Host bridge [0600]: VIA Technologies, Inc. K8M800 Host Bridge [1106:4204] Flags: bus master, medium devsel, latency 0 00:00.7 Host bridge [0600]: VIA Technologies, Inc. K8M800 Host Bridge [1106:7204] Flags: bus master, medium devsel, latency 0 00:01.0 PCI bridge [0604]: VIA Technologies, Inc. VT8237 PCI bridge [K8T800/K8T890 South] [1106:b188] (prog-if 00 [Normal decode]) Flags: bus master, 66MHz, medium devsel, latency 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 Memory behind bridge: d100-d1ff Prefetchable memory behind bridge: f000-f3ff Capabilities: [80] Power
Bug#397600: deskbar-applet: fails to start: ImportError: No module named gtkexcepthook
Package: deskbar-applet Version: 2.14.2-4.1 Severity: grave Justification: renders package unusable Hi, the latest upgrade has entirely broken deskbar-applet. Downgrading to the version in testing brings things back to normal. Console output: /[EMAIL PROTECTED]:~$ /usr/lib/deskbar-applet/deskbar-applet -w Running installed deskbar, using [/usr/lib/python2.4/site-packages/deskbar:$PYTHONPATH] Data Dir: /usr/share/deskbar-applet Handlers Dir: ['/home/jr/.gnome2/deskbar-applet/handlers', '/usr/lib/deskbar-applet/handlers'] Binding Global shortcut AltF3 to focus the deskbar Traceback (most recent call last): File /usr/lib/deskbar-applet/deskbar-applet, line 50, in ? import gtkexcepthook ImportError: No module named gtkexcepthook [EMAIL PROTECTED]:~$ Thanks, Johannes -- System Information: Debian Release: 4.0 APT prefers unstable APT policy: (500, 'unstable'), (500, 'testing'), (1, 'experimental') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.18-1-k7 Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8) Versions of packages deskbar-applet depends on: ii gconf2 2.16.0-2 GNOME configuration database syste ii libart-2.0-2 2.3.17-1 Library of functions for 2D graphi ii libatk1.0-01.12.3-1 The ATK accessibility toolkit ii libbonobo2-0 2.14.0-2 Bonobo CORBA interfaces library ii libbonoboui2-0 2.14.0-5 The Bonobo UI library ii libc6 2.3.6.ds1-8 GNU C Library: Shared libraries ii libcairo2 1.2.4-4 The Cairo 2D vector graphics libra ii libebook1.2-5 1.6.3-2 Client library for evolution addre ii libedataserver1.2-71.6.3-2 Utility library for evolution data ii libfontconfig1 2.4.1-2 generic font configuration library ii libgconf2-42.16.0-2 GNOME configuration database syste ii libglib2.0-0 2.12.4-1 The GLib library of C routines ii libgnome-desktop-2 2.14.3-1 Utility library for loading .deskt ii libgnome-keyring0 0.6.0-2 GNOME keyring services library ii libgnome2-02.16.0-2 The GNOME 2 library - runtime file ii libgnomecanvas2-0 2.14.0-2 A powerful object-oriented display ii libgnomeui-0 2.14.1-2 The GNOME 2 libraries (User Interf ii libgnomevfs2-0 2.14.2-3 GNOME virtual file-system (runtime ii libgtk2.0-02.8.20-3 The GTK+ graphical user interface ii libice61:1.0.1-2 X11 Inter-Client Exchange library ii liborbit2 1:2.14.3-0.1 libraries for ORBit2 - a CORBA ORB ii libpango1.0-0 1.14.7-1 Layout and rendering of internatio ii libpopt0 1.10-3lib for parsing cmdline parameters ii libsm6 1:1.0.1-3 X11 Session Management library ii libstartup-notification0 0.8-2 library for program launch feedbac ii libx11-6 2:1.0.3-2 X11 client-side library ii libxcursor11.1.7-4 X cursor management library ii libxext6 1:1.0.1-2 X11 miscellaneous extension librar ii libxfixes3 1:4.0.1-4 X11 miscellaneous 'fixes' extensio ii libxi6 1:1.0.1-3 X11 Input extension library ii libxinerama1 1:1.0.1-4.1 X11 Xinerama extension library ii libxml22.6.27.dfsg-1 GNOME XML library ii libxrandr2 2:1.1.0.2-4 X11 RandR extension library ii libxrender11:0.9.1-3 X Rendering Extension client libra ii python 2.4.4-1 An interactive high-level object-o ii python-glade2 2.8.6-6 GTK+ bindings: Glade support ii python-gnome2 2.12.4-5 Python bindings for the GNOME desk ii python-gnome2-desktop 2.14.0-3 Python bindings for the GNOME desk ii python-gtk22.8.6-6 Python bindings for the GTK+ widge ii python-support 0.5.4 automated rebuilding support for p ii python2.4 2.4.4-1 An interactive high-level object-o Versions of packages deskbar-applet recommends: ii gnome-utils 2.16.0-1 GNOME desktop utilities ii python-beagle 0.2.12-1 python bindings for beagle ii python-soappy 0.11.3-1.6 SOAP Support for Python (SOAP.py) -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#397599: exult: FTBFS: missing build dependency
Package: exult Version: 1.2-10 Severity: serious Justification: FTBFS on i386, very likely to fail everywhere else Usertags: grid5000 Hi, During a rebuild of all packages in etch, I discovered that your package failed to build on i386. Relevant parts: g++ -O2 -Wno-long-long -O2 -Wl,--as-needed -o exult actions.o actorio.o actors.o alloc.o args.o bggame.o brow ser.o cheat.o cheat_screen.o combat.o delobjs.o devgame.o dir.o drag.o effects.o exult.o exultmenu.o game.o g ameclk.o gamedat.o gamemap.o gamerend.o gamewin.o keys.o keyactions.o menulist.o monsters.o mouse.o npcnear.o npctime.o palette.o party.o paths.o readnpcs.o schedule.o segfile.o shapeid.o sigame.o tqueue.o txtscroll.o version.o xdrag.o pathfinder/.libs/libpathfinder.a audio/.libs/libaudio.a audio/midi_drivers/.libs/libmididr v.a flic/.libs/libflic.a conf/.libs/libconf.a imagewin/.libs/libimagewin.a server/.libs/libserver.a usecode/. libs/libusecode.a shapes/.libs/libshapes.a objs/.libs/libobjs.a gumps/.libs/libgumps.a files/.libs/libu7file. a files/zip/.libs/libminizip.a -L/usr/lib /usr/lib/libSDL_mixer.so /usr/lib/libvorbisfile.so /usr/lib/libvorb is.so /usr/lib/libogg.so /usr/lib/libsmpeg.so -lstdc++ -lm /usr/lib/libSDL.so -lz xdrag.o: In function `Get_window_coords(_XDisplay*, unsigned long, int, int)': xdrag.cc:(.text+0xf0): undefined reference to `XQueryTree' xdrag.cc:(.text+0xff): undefined reference to `XFree' xdrag.cc:(.text+0x13e): undefined reference to `XGetWindowAttributes' The full build log is available from http://ox.blop.info/bazaar/buildlogs/20061107/ About the archive rebuilt: The rebuilt was done on about 30 AMD64 nodes of the Grid'5000 platform, using a chroot containing an etch i386 environment (not unstable). Internet was not accessible from the build nodes. The builds were processed as root, in a clean chroot environment. About Grid'5000: The Grid'5000 project aims at building a highly reconfigurable experimental Grid platform gathering 9 sites and featuring a total of 5000 CPUs. Its main purpose is to serve as an experimental testbed for research in Grid Computing. To learn more about Grid'5000, read https://www.grid5000.fr/ -- | Lucas Nussbaum | [EMAIL PROTECTED] http://www.lucas-nussbaum.net/ | | jabber: [EMAIL PROTECTED] GPG: 1024D/023B3F4F | -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#397597: select query incorrectly returns empty dataset if order by is present, but works after dumping and restoring the database
Package: mysql-server-5.0 Version: 5.0.26-2 Severity: normal Hello, thanks for maintaining mysql. This one is weird, but I can regularly reproduce it in my machine. Here is how: 1. Create the database test, on InnoDB 2. zcat intial-build.gz | mysql test 3. mysql test 4. SELECT pa.lat, pa.lon, pa.ident, c.ltype, c.l1, c.l2, c.ptype, c.p1, c.p2, c.datetime, c.id_report, d.id_var, d.value, pa.id, c.id FROM context AS c JOIN pseudoana AS pa ON c.id_ana = pa.id JOIN data AS d ON d.id_context=c.id WHERE c.id_report=1 AND c.datetime='1001-01-01 00:00:00' ORDER BY c.id_ana, c.datetime, c.ltype, c.l1, c.l2, c.ptype, c.p1, c.p2; will return an empty result 5. SELECT pa.lat, pa.lon, pa.ident, c.ltype, c.l1, c.l2, c.ptype, c.p1, c.p2, c.datetime, c.id_report, d.id_var, d.value, pa.id, c.id FROM context AS c JOIN pseudoana AS pa ON c.id_ana = pa.id JOIN data AS d ON d.id_context=c.id WHERE c.id_report=1 AND c.datetime='1001-01-01 00:00:00'; will return a non-empty result 6. mysqldump test /tmp/dump 7. mysql test /tmp/dump 8. SELECT pa.lat, pa.lon, pa.ident, c.ltype, c.l1, c.l2, c.ptype, c.p1, c.p2, c.datetime, c.id_report, d.id_var, d.value, pa.id, c.id FROM context AS c JOIN pseudoana AS pa ON c.id_ana = pa.id JOIN data AS d ON d.id_context=c.id WHERE c.id_report=1 AND c.datetime='1001-01-01 00:00:00' ORDER BY c.id_ana, c.datetime, c.ltype, c.l1, c.l2, c.ptype, c.p1, c.p2; will return a non-empty result I'm attaching initial-build.gz to this bug report. Ciao, Enrico -- System Information: Debian Release: 4.0 APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.18-1-686 Locale: LANG=it_IT.UTF-8, LC_CTYPE=it_IT.UTF-8 (charmap=UTF-8) Versions of packages mysql-server-5.0 depends on: ii adduser 3.99 Add and remove users and groups ii debconf [debconf-2.0] 1.5.8Debian configuration management sy ii libc6 2.3.6.ds1-8 GNU C Library: Shared libraries ii libdbi-perl 1.52-1 Perl5 database interface by Tim Bu ii libgcc1 1:4.1.1-19 GCC support library ii libmysqlclient15off 5.0.26-2 mysql database client library ii libncurses5 5.5-5Shared libraries for terminal hand ii libreadline55.2-1GNU readline and history libraries ii libstdc++6 4.1.1-19 The GNU Standard C++ Library v3 ii libwrap07.6.dbs-11 Wietse Venema's TCP wrappers libra ii lsb-base3.1-19 Linux Standard Base 3.1 init scrip ii mysql-client-5.05.0.26-2 mysql database client binaries ii mysql-common5.0.26-2 mysql database common files (e.g. ii passwd 1:4.0.18.1-5 change and administer password and ii perl5.8.8-6.1Larry Wall's Practical Extraction ii psmisc 22.3-1 Utilities that use the proc filesy ii zlib1g 1:1.2.3-13 compression library - runtime Versions of packages mysql-server-5.0 recommends: ii mailx1:8.1.2-0.20050715cvs-1 A simple mail user agent -- debconf information: mysql-server-5.0/really_downgrade: false mysql-server-5.0/start_on_boot: true mysql-server/error_setting_password: mysql-server-5.0/mysql_update_hints1: mysql-server-5.0/nis_warning: mysql-server-5.0/postrm_remove_databases: false mysql-server-5.0/no_upgrade_with_isam_tables: * mysql-server-5.0/mysql_install_db_notes: initial-build.gz Description: Binary data
Bug#397604: freemind: FTBFS: should use the sun-java5-* packages instead of j2sdk1.4
Package: freemind Version: 0.7.1-6 Severity: important Usertags: grid5000 Hi, During a rebuild of all packages in etch, I discovered that your package failed to build on i386. It is using a build-dependency on j2sdk1.4, which could probably be replaced by one on sun-java5-jdk. It would allow the package to build without requiring non-packaged software. About the archive rebuilt: The rebuilt was done on about 30 AMD64 nodes of the Grid'5000 platform, using a chroot containing an etch i386 environment (not unstable). Internet was not accessible from the build nodes. The builds were processed as root, in a clean chroot environment. About Grid'5000: The Grid'5000 project aims at building a highly reconfigurable experimental Grid platform gathering 9 sites and featuring a total of 5000 CPUs. Its main purpose is to serve as an experimental testbed for research in Grid Computing. To learn more about Grid'5000, read https://www.grid5000.fr/ -- | Lucas Nussbaum | [EMAIL PROTECTED] http://www.lucas-nussbaum.net/ | | jabber: [EMAIL PROTECTED] GPG: 1024D/023B3F4F | -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#397603: cyrus-sasl2: FTBFS on amd64 (PIC linking issue)
Package: cyrus-sasl2 Version: 2.1.22-1 Severity: serious cyrus-sasl2 fails to build from source on amd64 because autotools generates non-PIC static libraries which are then used to create a PIC shared library. This works on i386 but not on amd64. A build log fragment [0]: --8-- Making all in plugins make[3]: Entering directory `/build/buildd/cyrus-sasl2-2.1.22/plugins' /bin/sh ../libtool --tag=CC --mode=link x86_64-linux-gnu-gcc -Wall -W -Wall -g -O2 -Wl,-z,defs -module -export-dynamic -rpath /usr/lib/sasl2 -o libsasldb.la -version-info 2:22:0 sasldb.lo sasldb_init.lo plugin_common.lo ../sasldb/libsasldb.la -ldb-4.2 -lresolv x86_64-linux-gnu-gcc -shared .libs/sasldb.o .libs/sasldb_init.o .libs/plugin_common.o -Wl,--whole-archive ../sasldb/.libs/libsasldb.a -Wl,--no-whole-archive /usr/lib/libdb-4.2.so -lresolv -Wl,-z -Wl,defs -Wl,-soname -Wl,libsasldb.so.2 -o .libs/libsasldb.so.2.0.22 /usr/bin/ld: ../sasldb/.libs/libsasldb.a(allockey.o): relocation R_X86_64_32 against `a local symbol' can not be used when making a shared object; recompile with -fPIC ../sasldb/.libs/libsasldb.a(allockey.o): could not read symbols: Bad value collect2: ld returned 1 exit status make[3]: *** [libsasldb.la] Error 1 make[3]: Leaving directory `/build/buildd/cyrus-sasl2-2.1.22/plugins' make[2]: *** [all-recursive] Error 1 make[2]: Leaving directory `/build/buildd/cyrus-sasl2-2.1.22' make[1]: *** [all] Error 2 make[1]: Leaving directory `/build/buildd/cyrus-sasl2-2.1.22' make: *** [build-arch-stamp] Error 2 ** Build finished at 20061108-0430 FAILED [dpkg-buildpackage died] --8-- [0] http://buildd.debian.org/fetch.cgi?pkg=cyrus-sasl2;ver=2.1.22-1;arch=amd64;stamp=1162960218 -- System Information: Debian Release: testing/unstable APT prefers testing APT policy: (500, 'testing') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.17-1-686 Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#397602: fop: FTBFS: should use the sun-java5-* packages instead of j2sdk1.4
Package: fop Version: 1:0.20.5-8 Severity: important Usertags: grid5000 Hi, During a rebuild of all packages in etch, I discovered that your package failed to build on i386. It is using a build-dependency on j2sdk1.4, which could probably be replaced by one on sun-java5-jdk. It would allow the package to build without requiring non-packaged software. About the archive rebuilt: The rebuilt was done on about 30 AMD64 nodes of the Grid'5000 platform, using a chroot containing an etch i386 environment (not unstable). Internet was not accessible from the build nodes. The builds were processed as root, in a clean chroot environment. About Grid'5000: The Grid'5000 project aims at building a highly reconfigurable experimental Grid platform gathering 9 sites and featuring a total of 5000 CPUs. Its main purpose is to serve as an experimental testbed for research in Grid Computing. To learn more about Grid'5000, read https://www.grid5000.fr/ -- | Lucas Nussbaum | [EMAIL PROTECTED] http://www.lucas-nussbaum.net/ | | jabber: [EMAIL PROTECTED] GPG: 1024D/023B3F4F | -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#356853: License of your contribution to the ae package
Hi, Rolf Niepraschk [EMAIL PROTECTED] wrote: My account has been changed: [EMAIL PROTECTED] It would be nice if you can change this also in ae.sty. This address is the one I tried previously. So, you mean we should use the @gmx.de one instead, right? From a pratical point of view, I think I'll put your name and that of Gilbert Ritschard in the Copyright line of ae.sty (as hinted by ae's README), and will inlude the names along with the email addresses in an AUTHORS file, so that there is only one place to update when an email address changes. Of course you can change it. All my packages have LPPL license. Great, thank you very much. We now have the permission from all copyright holders I could identify for ae. :-) When I have some time, I'll submit an updated package to Lars with the LPPL license applied to all files, which he can review and upload to CTAN. Thanks to all who made this possible. Regards, -- Florent -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#397608: gabber: really suitable for a release ?
Package: gabber Version: 0.8.8-7 Severity: serious Hi, Gabber is unmaintained upstream since 2003, and many other good alternatives exist (gossip for the lightweight gnome client, gajim for the feature complete gnome client) and are packaged in Debian. Do we really want to release with gabber ? Not to mention that it has 1 serious and 5 important bugs, not counting this one. -- | Lucas Nussbaum | [EMAIL PROTECTED] http://www.lucas-nussbaum.net/ | | jabber: [EMAIL PROTECTED] GPG: 1024D/023B3F4F | -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#393030: bug #393030 still here in fextremes 240.10068-1
reassign 393030 r-cran-fseries found 393030 221.10065-3 close 393030 240.10068-1 thanks On Wed, Nov 08, 2006 at 01:17:06PM +0100, Lucas Nussbaum wrote: I just reproduced the same failure as the one described by Martin, but with the version which is supposed to fix it. Because this was never a bug in fextremes, it was a bug in the build dependency fseries. -- Steve Langasek Give me a lever long enough and a Free OS Debian Developer to set it on, and I can move the world. [EMAIL PROTECTED] http://www.debian.org/ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#397589: texlive-latex-extra does not contain beamer
Frank Küster [EMAIL PROTECTED] wrote: This requires a fix to tpm2deb.pl, I'll have a look. I guess this will do: --- tpm2deb.pl (Revision 1941) +++ tpm2deb.pl (Arbeitskopie) @@ -948,6 +948,7 @@ } print CONTROL .\n This package includes the following CTAN packages:\n; foreach $p (@foo) { + next if is_blacklisted($p,); $tit = $TeXLive{$p}{'title'}; if (defined($Title{$p})) { $tit = $Title{$p}; but I haven't checked yet. Regards, Frank -- Dr. Frank Küster Single Molecule Spectroscopy, Protein Folding @ Inst. f. Biochemie, Univ. Zürich Debian Developer (teTeX/TeXLive)
Bug#397605: cyrus-sasl2: FTBFS on hppa (PIC linking issue)
Package: cyrus-sasl2 Version: 2.1.22-1 Severity: serious cyrus-sasl2 fails to build from source on hppa: --8-- Making all in plugins make[3]: Entering directory `/build/buildd/cyrus-sasl2-2.1.22/plugins' /bin/sh ../libtool --tag=CC --mode=link hppa-linux-gnu-gcc -Wall -W -Wall -g -O2 -Wl,-z,defs -module -export-dynamic -rpath /usr/lib/sasl2 -o libsasldb.la -version-info 2:22:0 sasldb.lo sasldb_init.lo plugin_common.lo ../sasldb/libsasldb.la -ldb-4.2 -lresolv -lresolv hppa-linux-gnu-gcc -shared .libs/sasldb.o .libs/sasldb_init.o .libs/plugin_common.o -Wl,--whole-archive ../sasldb/.libs/libsasldb.a -Wl,--no-whole-archive /usr/lib/libdb-4.2.so -lresolv -Wl,-z -Wl,defs -Wl,-soname -Wl,libsasldb.so.2 -o .libs/libsasldb.so.2.0.22 /usr/bin/ld: ../sasldb/.libs/libsasldb.a(db_berkeley.o): relocation R_PARISC_DPREL21L can not be used when making a shared object; recompile with -fPIC ../sasldb/.libs/libsasldb.a(db_berkeley.o): could not read symbols: Bad value collect2: ld returned 1 exit status make[3]: *** [libsasldb.la] Error 1 make[3]: Leaving directory `/build/buildd/cyrus-sasl2-2.1.22/plugins' make[2]: *** [all-recursive] Error 1 make[2]: Leaving directory `/build/buildd/cyrus-sasl2-2.1.22' make[1]: *** [all] Error 2 make[1]: Leaving directory `/build/buildd/cyrus-sasl2-2.1.22' make: *** [build-arch-stamp] Error 2 ** Build finished at 20061107-1558 FAILED [dpkg-buildpackage died] --8-- http://buildd.debian.org/fetch.cgi?pkg=cyrus-sasl2;ver=2.1.22-1;arch=hppa;stamp=1162940348 The cause is apparently that autotools creates non-PIC static libraries which are then used to create a PIC shared library, which doesn't work on hppa. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#397606: scilab: 1-1E-16 displayed as 0.
Package: scilab Version: 4.0-7 Severity: important Hello Torsten, In a new scilex session: --a=1-1E-16 a = 0. --10*a ans = 10. a is incorrectly displayed as 0. This is very confusing. Cheers, -- Bill. [EMAIL PROTECTED] Imagine a large blue swirl here. -- System Information: Debian Release: 4.0 APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.18 Locale: LANG=fr_FR, LC_CTYPE=fr_FR (charmap=ISO-8859-1) Versions of packages scilab depends on: ii scilab-bin4.0-7 Matrix-based scientific software p ii tk8.4 [wish] 8.4.12-1 Tk toolkit for Tcl and X11, v8.4 - Versions of packages scilab recommends: ii scilab-doc4.0-7 Matrix-based scientific software p -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#397607: Segmentation fault when running nfs-kernel-server
Package: nfs-kernel-server Version: 1:1.0.10-4 Severity: grave Justification: renders package unusable sh -x /etc/init.d/nfs-kernel-server start + DESC='NFS kernel daemon' + PREFIX=/usr + '[' -x /usr/sbin/rpc.nfsd ']' + '[' -x /usr/sbin/rpc.mountd ']' + '[' -x /usr/sbin/exportfs ']' + DEFAULTFILE=/etc/default/nfs-kernel-server + RPCNFSDCOUNT=8 + RPCNFSDPRIORITY=0 + RPCMOUNTDOPTS= + NEED_SVCGSSD=no + RPCSVCGSSDOPTS= + PROCNFSD_MOUNTPOINT=/proc/fs/nfsd + '[' -f /etc/default/nfs-kernel-server ']' + . /etc/default/nfs-kernel-server ++ RPCNFSDCOUNT=8 ++ RPCNFSDPRIORITY=0 ++ RPCMOUNTDOPTS= ++ NEED_SVCGSSD= ++ RPCSVCGSSDOPTS= + . /lib/lsb/init-functions ++ FANCYTTY= ++ '[' -e /etc/lsb-base-logging.sh ']' ++ true + case $1 in + '[' -f /etc/exports ']' + do_modprobe nfsd + '[' -x /sbin/modprobe -a -f /proc/modules ']' + modprobe -q nfsd + true + '[' -f /proc/kallsyms ']' + grep -qE 'init_nf(sd| )' /proc/kallsyms + do_mount nfsd /proc/fs/nfsd + grep -E -qs 'nfsd$' /proc/filesystems + mountpoint -q /proc/fs/nfsd + return 0 + log_begin_msg 'Exporting directories for NFS kernel daemon...' + '[' -z 'Exporting directories for NFS kernel daemon...' ']' + echo -n 'Exporting directories for NFS kernel daemon...' Exporting directories for NFS kernel daemon...+ /usr/sbin/exportfs -r + '[' 0 '!=' 0 ']' + log_end_msg 0 + '[' -z 0 ']' + log_use_fancy_output + TPUT=/usr/bin/tput + EXPR=/usr/bin/expr + '[' xxterm '!=' xdumb ']' + '[' -x /usr/bin/tput ']' + '[' -x /usr/bin/expr ']' + /usr/bin/tput hpa 60 + /usr/bin/tput setaf 1 + '[' -z ']' + FANCYTTY=1 + case $FANCYTTY in + true ++ /usr/bin/tput setaf 1 + RED='' ++ /usr/bin/tput op + NORMAL='' + '[' 0 -eq 0 ']' + echo . . + return 0 + log_daemon_msg 'Starting NFS kernel daemon' + '[' -z 'Starting NFS kernel daemon' ']' + '[' -z '' ']' + echo -n 'Starting NFS kernel daemon:' Starting NFS kernel daemon:+ return + log_progress_msg nfsd + '[' -z nfsd ']' + echo -n ' nfsd' nfsd+ start-stop-daemon --start --oknodo --quiet --nicelevel 0 --exec /usr/sbin/rpc.nfsd -- 8 + '[' 0 '!=' 0 ']' + ClearAddr= + '[' -f /proc/net/rpc/auth.unix.ip/channel ']' + fgrep -qs 127.0.0.1 /proc/net/rpc/auth.unix.ip/content + echo 'nfsd 127.0.0.1 2147483647 localhost' + ClearAddr=yes + /usr/bin/rpcinfo -u localhost nfs 3 + '[' -z yes ']' + echo 'nfsd 127.0.0.1 1' Segmentation fault -- System Information: Debian Release: 4.0 APT prefers unstable APT policy: (500, 'unstable'), (500, 'testing') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.19-rc4-git10 Locale: [EMAIL PROTECTED], [EMAIL PROTECTED] (charmap=ISO-8859-15) (ignored: LC_ALL set to [EMAIL PROTECTED]) Versions of packages nfs-kernel-server depends on: ii libc62.3.6.ds1-8 GNU C Library: Shared libraries ii libcomer 1.39+1.40-WIP-2006.10.02+dfsg-2 common error description library ii libgssap 0.10-4 A mechanism-switch gssapi library ii libkrb53 1.4.4-3 MIT Kerberos runtime libraries ii libnfsid 0.17-3 An nfs idmapping library ii librpcse 0.14-2 allows secure rpc communication us ii lsb-base 3.1-19 Linux Standard Base 3.1 init scrip ii nfs-comm 1:1.0.10-4 NFS support files common to client ii ucf 2.0016 Update Configuration File: preserv nfs-kernel-server recommends no packages. -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#397589: texlive-latex-extra does not contain beamer
Frank Küster wrote: Michael Piefel [EMAIL PROTECTED] wrote: Package: texlive-latex-extra Version: 2005.dfsg.2-2 Severity: normal texlive-latex-extra claims to contain beamer, but does not. Ah, interesting. It's texlive-latex-recommended that Recommends: latex-beamer. One part of the fix is going to be: Wait a second. IIRC moving beamer from texlive-latex-extra to texlive-latex-recommended was part of the TPM reorganisation done some time ago. It simply does not make sense to have the (old) prosper in texlive-latex-recommended while the currently used beamer or powerdot are in texlive-latex-extra. Hence I think it is only the description that has to be fixed. cheerio ralf
Bug#147416: The program will begin
Earlier this year we wrote to you about our Knowledge Based Degree Program (KBDP). We thought we would follow up and see if there is any reason why you have not called our registrars office. Most people don't realize that these degrees are completely valid, and only our staff and yourself know that they are based on knowledge of the subject. If you are still interested in obtaining a degree then please give our counselors a call at anytime during the week. Counselor Office: 1-206-984-1705 Regards Nancy Parker Aetherius 0nline University -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]