Re: kernel-2.6.9 config for G5
On Fri, 19 Nov 2004, Eric Deveaud wrote: On 19 Nov 2004, Jens Schmalzing wrote: Eric Deveaud writes: could someone point me to a working 2.6.9 kernel config file for a dual-1.8 g5 You will find one in /boot/config-2.6.9-power4-smp if you install the kernel-image-power4-smp package from unstable. thank's I grab the package OK I'm back for the 2.6.9 compil on the biG5 I finaly ended to set up a 2.6.9 kernel on the box using a tweaked /arch/ppc64/configs/g5_defconfig now it's time to try to set X on this box. just a stupid question, as I'll migrate my workstation from my old bi-G4 to the bi-G5. and given the graphic card of the 2 machine are G4 : ATI Technologies Inc Radeon R250 If [Radeon 9000] (prog-if 00 [VGA]) G5 : nVidia Corporation NV34 [GeForce FX 5200 Ultra] (rev a1) (prog-if 00 [VGA]) and given I have 2 17 apple flat screen, wich card did you recoment to put on the G5 in order to have a dual-screen box ?? Eric -- J : Je vois mal les développeurs commencer à travailler sur des : hypothèses. CS: Ben ça dépend, s'ils sont issus du monde Mac... z'ont l'habitude -+- CS in Guide du Macounet Pervers : Bien développer ses hypothèses -+-
kernel-2.6.9 config for G5
Hi, I'm trying to set up 2.6.9 kernel on a dual-1.8 G5, installed with di using the make pmac_defconfig as bases and setting the smp. the kernel boots fine but hangs on with the following RAMDISK: cramfs filesystem found at bock 0 RAMDISK: image too big! (4728KiB/4096KiB) VFS: Cannot open root device sda4 or unknown-block(0,0) Please append a correct root= boot option Kernel panic: VFS: Unable to mount root fs on unknown-block(0,0) 0Rebooting in 180 seconds... I guess there's something wrong with my settings, could someone point me to a working 2.6.9 kernel config file for a dual-1.8 g5 thank's Eric -- Chalut la foule , ça veut dire regardez ce que je vais répondre à l'autre, déjà c'est une remarque méprisante envers quelqu'un qui ne t'a rien fait -+- Fr in GNU - Ch'est chcandaleux : che me chui fait inchulter ! -+-
Re: kernel-2.6.9 config for G5
On 19 Nov 2004, Jens Schmalzing wrote: Eric Deveaud writes: could someone point me to a working 2.6.9 kernel config file for a dual-1.8 g5 You will find one in /boot/config-2.6.9-power4-smp if you install the kernel-image-power4-smp package from unstable. thank's I grab the package Eric -- GM je sais pas si les filtres sur fr.* existent puisque j'ai vu passer GM un msg sur fr.soc.histoire avec des photos de pièces gauloises... C'est parce qu'il ne faut pas de filtre pour les gauloises. -+- PV in http://le-gnu.net - Fume, c'est du binaire -+-
G5 install media.
Hi, Some times ago I installed sarge on a biG5-1.8GHz with some debian installer tweaking. today I have the same machine kind to install for a workmate, wich installer did you recomend dailly build or the current sarge installer-powerpc thank's Eric -- «Le monochrome, c'est pour ceux qui s'intéressent (encore) au contenu. Usenet dans ces conditions, c'est comme le web avec lynx, on prend trop conscience du vide, c'est déprimant.» -+- JLC in Guide du linuxien pervers : Coup de cafard... -+-
Re: install sarge on dual G5 - quasi-success
On Mon, 31 May 2004, Michal wrote: tip for the fans. modprobe therm_pm72 the modprobe is succesful in the 2.4 kernel, but does nothing to reduce the vacuum-cleaner level of the fans... sorry I could not answer as the G5 is running an home brew self compiled 2.6.4 Eric -- Et je constate que je suis moins seul à la défendre sur quelques cas concrets, par exemple je ne suis pas le seul, loin de là, à avoir critiqué le manque de transparence des listes noires. -+- AB in http://www.le-gnu.net : Opaque, ou à la trinité -+-
Re: install sarge on dual G5 - hang
On Thu, 27 May 2004, Benjamin Herrenschmidt wrote: On Thu, 2004-05-27 at 05:46, Michal wrote: Fill a bug report against debian-installer with this info for start, so it gets fixed. ok, done. Here's hoping for a fix, as otherwise I'm sitting on a useless dual G5... I was abble to tweak the installation using the knoppix-mib CD, don't remember if it was pre10 or pre7. URL:ftp://ftp.crihan.fr/mirrors/knoppix-mib.org/ using the knoppix-mib CD mib CD you will be abble to boot the dual G5 and have a root shell, and run deboostrap by hand. see the concise report I've posted on this list URL:http://lists.debian.org/debian-powerpc/2004/04/msg00012.html tip for the fans. modprobe therm_pm72 Eric -- Le danger si on ne s'en aperçoit pas c'est que le processeur est constamment à 100% de sa capacité, il chauffe donc beaucoup plus et risque de lacher si il est mal ventilé. -+- MZ in le Neuneu Pète un Câble : mon proc est en chaleur -+-
G5 report problematic succes
Hi today was quite work free, please don't repeat it to my boss ;-) I started playing seriously with the G5 booting the k-mib-ppc-beta-pre-10, in single mode and isntalling debian thru debootstrap was quite simple. just to note that debootstraps hangs (at least the one located on the k-mib pre10) while trying to use libacl and libattr fetching those libs from any debian mirror, and using dpkg to install the 2 fautives, solved the problem. yaboot setting was a little bit tricky until I realize that the guilty was df output . yabootconfig fail while trying to get the KERNDEV, KERNDIR, LINKDIR and PARTITION playing with bash man page, allow to understand the echo command and to correct manualy the problem. Eric -- Et tes réflexions virtuelles ne t'ont pas amenées à penser que peut être l'erreur pouvait eventuellement (...), mélé à une conjonction d'Alpha du Centaure et du moulin à café de ma grand-mère que TU t'y prenais mal ? JF in Guide du Macounet Pervers : Ne pas jeter le manche après la cognée
Re: G5 report problematic succes
On Thu, 1 Apr 2004, Sven Luther wrote: On Thu, Apr 01, 2004 at 04:50:33PM +0200, Eric Deveaud wrote: Notice that normally, you should have been able to use the debian-installer for installing debian. I have a power4 config and altough i don't know if the yaboot on the cdrom was fixed to include the power3 and power4 kernels, you should have been able to circumvent that. I tried the dailly buil from 03/28, 03/29, 03/30 and 03/31 none was abble either to boot from cd either to not hangs Could you at least try out the kernel-image-2.4.25-power4-pmac kernel on this G5, to confirm that it works ? I can give a try, I just finished a 2.6.4 build Linux hebus.sis.pasteur.fr 2.6.4 #2 SMP Thu Apr 1 15:51:33 CEST 2004 ppc GNU/Linux but to be honest I don't have any idea about how to use the kernel* debian packages. i've always built the kernel using the prehistoric way ie: make [oldc|menu]config, make ;-) as i don't care for a lot of features built in the prebuild kernels Eric -- Je voudrais savoir s'il existe un compteur de vitesse (?) pour savoir à quelle vitesse on est réellement connecté au FAI et surtout si une telle bête existe... où la trouver. -+- RJ in: Guide du Neuneu d'Usenet - Baisse la tête et pédale -+-
Re: G5 install media
On Fri, 26 Mar 2004, Yves Combe wrote: Eric Deveaud a écrit : OK it work's but just a question before my 3 workmate kills me. is there such news about the fan support ? or should I have to put the machine to the server room ? modprobe therm_pm72 just one word from my workmate: THANK'S Eric -- Les risques du métier: Son menton a soudainement quitté la paume de sa main droite posée grace à un coude et sa tête est venue frapper lourdement le bureau. Une fois de plus, un fonctionnaire s'est tué au travail. (Les Nuls)
G5 install media
Hi, I have a biG5 lying on my desktop, could someone point me to a iso image that will allow me to install debian on this machine thank's -- à mail and news de microsoft, ont pouvait faire un del total de tous messages sur tous les news groupes (c'est l'un des bugs du logiciel) fort heureusement personne ne l'a vu ou utiliser. -+- J0 in http://neuneu.mine.nu : Docteur Follanews -+-
Re: G5 install media
On Fri, 26 Mar 2004, Yves Combe wrote: Eric Deveaud a écrit : Bonjour Eric, Hi, I have a biG5 lying on my desktop, could someone point me to a iso image that will allow me to install debian on this machine thank's Les k-mib-ppc-beta-preX sont des livecd à la knoppix. Tu peux utiliser debootstrap pour installer debian à partir d'elle. Le dernière (k-mib-ppc-beta-pre12) ne marche pas sur les G5. Mais la pre10 si. ftp://ftp.crihan.fr/mirrors/knoppix-mib.org/ La pre7 devrait suffire en fait (pas de X dedans: elle est plus petite). thank's I'll give a try to the pre10 or pre7 as you mentionned the pre12 does not work on the G5. Eric -- Si la connerie était cotée en bourse,tu serais incarcéré pour délit d'initié... -+- EB in: Guide du Cabaliste Usenet - Les initiés ont la cote -+-
Re: G5 install media
On Fri, 26 Mar 2004, Eric Deveaud wrote: Le dernière (k-mib-ppc-beta-pre12) ne marche pas sur les G5. Mais la pre10 si. ftp://ftp.crihan.fr/mirrors/knoppix-mib.org/ thank's I'll give a try to the pre10 or pre7 as you mentionned the pre12 does not work on the G5. hummm OK it work's but just a question before my 3 workmate kills me. is there such news about the fan support ? or should I have to put the machine to the server room ? Eric -- Bonjour, je sais que le site de free.fr a été piraté et que la liste et les mots de passe des utilisateurs ont été diffusés. J'aimerai savoir ou je peux le récupérer ou si quelqu'un pouvait me l'envoyer. -+- Capitaine Crochet in GNU - Je débute poste restante -+-
Re: G5 install media
On Fri, 26 Mar 2004, Yves Combe wrote: Eric Deveaud a écrit : OK it work's but just a question before my 3 workmate kills me. is there such news about the fan support ? or should I have to put the machine to the server room ? modprobe therm_pm72 thank's I'll give it a try (and also to kernel 2.6.3, currently compiling on my g4) monday. Eric -- J'ai un fichier WIN386.SWP de 90 Megas qui vient d'apparaître sur mon lecteur E (partition) et je ne peux pas le faire partir. -+- P in : http://www.le-gnu.net Swappe un peu à ce qu'on te dit -+-
Re: kernel-2.6.0-test9-benh fails to build
On Thu, 20 Nov 2003, Arnaud Vandyck wrote: CPU: G4 - 1.250 Ghz I've rsync'ed the benh 2.6.0-test9 kernel and tried to build it but it fails with these lines just before it stop making it: [...] CPP arch/ppc/kernel/vmlinux.lds.s CC arch/ppc/platforms/pmac_pic.o CC arch/ppc/platforms/pmac_setup.o CC arch/ppc/platforms/pmac_time.o CC arch/ppc/platforms/pmac_feature.o arch/ppc/platforms/pmac_feature.c: In function `probe_motherboard': arch/ppc/platforms/pmac_feature.c:2281: error: `powersave_lowspeed' undeclared (first use in this function) arch/ppc/platforms/pmac_feature.c:2281: error: (Each undeclared identifier is reported only once arch/ppc/platforms/pmac_feature.c:2281: error: for each function it appears in.) make[2]: *** [arch/ppc/platforms/pmac_feature.o] Error 1 make[1]: *** [arch/ppc/platforms] Error 2 make[1]: Leaving directory `/usr/src/kernel-source-2.6.0-test9' make: *** [stamp-build] Error 2 I did use `make defconfig' as read on #debianppc If anyone as an idea... i yes edit arch/ppc/platforms/pmac_feature.c goto line 53 add the following line extern int powersave_lowspeed; for me. this allows the compilation Eric -- Et je constate que je suis moins seul à la défendre sur quelques cas concrets, par exemple je ne suis pas le seul, loin de là, à avoir critiqué le manque de transparence des listes noires. -+- AB in http://www.le-gnu.net : Opaque, ou à la trinité -+-
Re: 2.6.0-test9 kernel on xserv
On Wed, 19 Nov 2003, Adam Done wrote: On Wed, 2003-11-19 at 02:19, Benjamin Herrenschmidt wrote: Tried my tree with a pmac_defconfig ? (then eventually turning on SMP) Yes, I rsync but what do you mean with pmac_defconfig? Was I suposed to turn something off first? just that pmac_config is a make target you can issue make pmac_config, wich will produce a default configured powermac compiled kernel. Eric -- J'aime bien les titres ronflants. Mais si vous proposez la place de Grand Manitou Intranet/Internet, Sommité du HTML, Maître Incontesté du Java, j'envisagerai votre proposition avec plus d'intérêt. -+- MS In http://neuneu.mine.nu : Testons modestes et pondérés -+-
Re: Twin Turbo 128 in PPC 9600/350
On Fri, 21 Feb 2003, Rogério Brito wrote: On Feb 21 2003, David Campillos wrote: I'm trying to configure gdm with a Twin Turbo 128 video card in a PPC 9600/350. (...) I know that lspci can help me, but I have 2.2 kernel, and that command only outputs hex addresses. First of all, you should compile yourself a 2.4 kernel, because kernels from the 2.2 series apparently aren't able to see all devices in the PCI buses. This was one of the first things that I had to get done to get an old 9500/180MP to use an imstt card. correct me if I'm wrong (long time that my 9600 died) but if your booting via BootX, (as some of the material initialisation is performed by MacOS before linux boots up) you also have to play with resolutions modes on MacOS side, check under linux, and so on until you find a correct MacOS setting which will be compatible with Xfree Eric -- dvips -o $@ $ Faut faire gffe de pas te couper avec ton truc, t'as mis des ciseaux ($) partout :)) -+- Dom in Guide du linuxien pervers - J'aime pas les Makefile ! -+-
Re: install MacOSX after Debian GNU/Linux
On Thu, 5 Dec 2002, Charles R.Twardy wrote: Why do we need to put the Apple_Bootstrap partition in 2 (or nearby)? in case something went wrong or in case you wippee the PRAM, the boot process on the Mac is to check the partition in ordered way, to find one partition wich is bootable. if your Apple_Bootstrap, with yaboot and ofboot script is present in position 2 you're sure that the machine will boot on this one. this eliminate some magic and vaudou open firmware incantation. is it possible to use an Apple_Bootstrap partition in any position, but it's easier to hold it on position 2 (or at least as the first one behind all the crappy mac-os9 patch/driver partition) Eric -- GM je sais pas si les filtres sur fr.* existent puisque j'ai vu passer GM un msg sur fr.soc.histoire avec des photos de pièces gauloises... C'est parce qu'il ne faut pas de filtre pour les gauloises. -+- PV in http://le-gnu.net - Fume, c'est du binaire -+-
Re: Quicksilver Install problem
On Mon, 2 Dec 2002, KingOfShadow wrote: On my new G4 Quicksilver 867x2 I cannot install woddy because it cannot find a my hard disk. Probably i think ithe problem si in the bus cose the it has only ATA/66 and ATA/100 ( the disk is a ATA/100). What can I do. either switch the disk on the ATA66 bus, and follow the xavier's instruction for the yaboot config either compile a new benh kernel, and use this one to install woody. on an hfs patition of your disk, copy the new 'home made' kernel, and from the woody CD copy also yaboot, yaboot.conf, ramdisk.tgz edit yaboot.conf to feet your need, (eg use the new kernel, and so on) boot under OF, and point it to yaboot copied on the disk. Eric -- Je tenais a remercier Wanadoo de l'hommage rendu ce jour au roi Hussein récemment disparu. En effet ma connexion est elle aussi cliniquement morte avec un débit de 0,2 Ko par seconde en pointe. -+- PV in: Guide du Neuneu d'Usenet - Le Roi est mort, vive le Roi -+-
Re: Quicksilver Install problem
On Wed, 4 Dec 2002, Yojimbo wrote: can't you exaplain better what should I do? I am a linux linux newbie. in this case switch the disk to the ATA66 bus, and follow the Xavier tips I have read the yaboot configuration manual and i have not understood waht exactly is the Boot Menu, and i need to use MacOS X/9 and linux both. boot on a MacOS install CD, partition your hard-disk in at list 3 pieces. 1 for MacOSX 1 for MacOS 9 1 left as free space for linux install MacOS 9 install MacOS X after this 2 stages, everithing should be OK install linux, reading the doc here URL:http://www.debian.org/releases/stable/powerpc/install set-up yaboot using the Xavier's tips according to your partition scheme. Eric -- RM : (Lance ResEdit ou Resorcerer ...) PC : C'est fini tout ça, ils écrivent leurs trucs en binaire chinois : recompilé en martien. -+- PC in Guide du Macounet Pervers : ResEdit a marche pu -+
[XFree] switch to console ?
Hi, running XFree86 Version 4.2.99.2 on bipro G4 I cannot switch to the console with the key comboe ctrl-alt-F{1-6} eg: ctrl-alt-F1 gives me a P under X the keys are mapped corectlyas xev comfirm it how can I swithc back to the console without killing X Eric PS crtl-alt-backspace is not working too. -- Bonjour, je sais que le site de free.fr a été piraté et que la liste et les mots de passe des utilisateurs ont été diffusés. J'aimerai savoir ou je peux le récupérer ou si quelqu'un pouvait me l'envoyer. -+- Capitaine Crochet in GNU - Je débute poste restante -+-
Re: [XFree] switch to console ?
On 28 Nov 2002, Michel Dänzer wrote: Why on earth do you report this here? ;) mistyping the alias;-( Eric -- «Dès que je clique sur mount, il ne fait rien et le cdrom reste unmount. Quel est le pb ?» -+- Popol in Guide du linuxien pervers : De l'avantage des interfaces... -+-
Re: Debian on iBook issues
On Wed, 20 Nov 2002, Curtis Vaughan wrote: Mouse: Is there a way to make the really stupid one-button mouse do a right click, say, as holding the Ctrl key and clicking? somebody, some times ago post a patch to do this. browse the archives it will be easy to find What do I need to do to have both the built-in mouse working and an external mouse through the USB? Using /dev/input/mice allows you to use the tracpad AND and external mouse, as I'm currently doing MACOSX boot: I don't know what's wrong with my setup, but I went by various instructions and installed OSX and then Debian on 2 separate partitions. Whereas Debian is on hd:4, OSX should be on hd:6. But I have gone through pretty much all options in the yaboot.conf file in setting the parameter macosx=/dev/hdx without ever being able to boot into my OSX installation. check your partitions again, and correct yaboot. don't forget to run ybin, in order to made the modification used. what's the output of sudo mac-fdisk -l /dev/hda ? Eric -- CF: à l'ECN, pour minimum 80% des gens linux=plantage. SR: Vos machines, elles ont été installées par des administrateurs NT ou quoi ? -+- Serge in Guide du Linuxien pervers - Bien configurer ses admins
Re: XFree86 4.2.99.2 / radeon 9000
On 18 Nov 2002, Michel Dänzer wrote: On Mit, 2002-11-13 at 17:26, Eric Deveaud wrote: using the 17' Apple flat monitor hooked on the ADC connector, it always ends with a black screen (I guess signall lost as the flashing power ligth on the flat panel means) the only things /var/log/XFree86.0.log reports is bulgroz:~ grep '^(WW)' /var/log/XFree86.0.log (WW) Open APM failed (/dev/apm_bios) (No such file or directory) (WW) RADEON(0): Video BIOS not detected in PCI space! (WW) RADEON(0): Attempting to read Video BIOS from legacy ISA space! (WW) RADEON(0): Video BIOS not found! (WW) RADEON(0): Video BIOS not detected, using default PLL parameters! These are mostly harmless. Have you played with Option DisplayType? No. But shame on me, I have to confess that I'm stupid. Apparently the problems comes from bad HorizSync an VertRefresh values. just putting something correct solve the problem. As I was experimenting some problems with the radeonfb driver, before BenH solve the problem, I was mind blinded, and was thinking of a radeon related problem. I have now X displaying correctly on the flat pannel. Does this mean radeonfb works? If so, it's strange that it doesn't work with Option UseFBDev. yes it works, and yes I use Option UseFBDev true Thank's Eric -- Entendu sur France Inter : Journaliste : Vous préférez cliquer sur le mulot ou sur la souris ? Jospin : Les deux, je cohabite ! -+- in: Guide du Cabaliste Usenet - Bien cohabiter avec son mulot -+-
Re: XFree86 4.2.99.2 / radeon 9000
On Tue, 19 Nov 2002, Ross Vumbaca wrote: Eric Deveaud wrote: As I was experimenting some problems with the radeonfb driver, before BenH solve the problem, I was mind blinded, and was thinking of a radeon related problem. What's the problem that you were having with the radeonfb driver? While trying to include the radeonfb driver (ie CONFIG_FB_RADEON=y) I lost the console at boot time, it stay definitevely black. it has been corrected by BenH few times ago Eric -- tu as aussi la [MacsBug 6.5.4]a7 qui est apparue recemment et qui supporte le Speech Manager, avec la dcmd spk_st qui permet de faire prononcer au mac la pile des appels ou le contenu des registres du PPC. -+- Ol. in Guide du Macounet Pervers : Tout se perd, ma bonne dame.. -+-
Re: XFree86 4.2.99.2 / radeon 9000
On Mon, 18 Nov 2002, Eric Deveaud wrote: I have now X displaying correctly on the flat pannel. just one note, as some people repoorted on Xpert list, I have also some yellowing problems. most of the colors presents a yellow domminance. it produce some funny effects Eric -- Bonjour, je sais que le site de free.fr a été piraté et que la liste et les mots de passe des utilisateurs ont été diffusés. J'aimerai savoir ou je peux le récupérer ou si quelqu'un pouvait me l'envoyer. -+- Capitaine Crochet in GNU - Je débute poste restante -+-
Re: TiBook 867mHz + ATI Radeon 9000
On Mon, 18 Nov 2002, Raph HP wrote: [OT] could you please set your mailer to wrap lines arond something readable eg 70/75 characters, please Sounds like an endianness problem, but the driver actually attempts to handle that... what depths have you tried? I've tried 8bpp, 16bpp and 24 (default). With 24 it is yellow, with 16 are kind of inverted. same probem here with the radeon9000 on the biG4 it's quite funny Eric -- DV: Depuis que j'ai enregistré MacSoup, il arrête pas de geler. GC: Attends le printemps. -+- GV in Guide du Macounet Pervers : faites chauffer MacSoup ! -+-
Re: Installer doesn't see the drive on a dual 867
On Tue, 12 Nov 2002, Pan wrote: [ONCE AGAIN] please answer UNDER the previous post it's easier to read and please cut what's not usefull Apparently the disk is /dev/hda for the installer, but it's ultra2 for OF. yes I have to reboot the machine, and if I go to the OF prompt, I can type 'boot ultra2:9,yaboot'. yes BUT, on the next screen, when I try to just hit enter (or type Linux and then enter, doesn't matter) it says Can't open device hd:0 hd:11,/vmlinux: Unable to open file, Invalid device Any ideas? because apparently OF uses 'ultra2' and linux uses '/dev/hda' and it's not liking it... yes it sound's a little confusing. while checking the yaboot.conf man page, you will find that you can specify the ofboot and device using the real OF path for those variables. I use the following (you should adjust to your settings) boot=/dev/hda2 ofboot=/[EMAIL PROTECTED]/[EMAIL PROTECTED]/[EMAIL PROTECTED]/[EMAIL PROTECTED]:2 device=/[EMAIL PROTECTED]/[EMAIL PROTECTED]/[EMAIL PROTECTED]/[EMAIL PROTECTED]: Eric -- [Linux] c'est une philosophie un art de vivre, un état intérieur, une sorte de fluide qui nous entoure et nous pénètre. Fais tourner stp ! -+- Guillaume in Guide du linuxien pervers - Tous drogués j'vous dis !
Re: XFree86 4.2.99.2 / radeon 9000
On Sat, 9 Nov 2002, Eric Deveaud wrote: On 8 Nov 2002, Michel Dänzer wrote: On Don, 2002-10-31 at 10:00, Eric Deveaud wrote: I'm trying to set up X with a radeon 9000 with a 17'' Apple flat pannel plugged on ADC Can you try my latest DRI packages from deb http://people.debian.org/~daenzer/dri-trunk/./ OK I'll do some testing on tuesday and tell you the results. well bad news ;-( using fresh benh rsync-ed kernel, using fresh installed dri-trunk and fresh compiled readeon.o from drm-trunk. using a CRT monitor plugged on DVI port X startx OK and I get the display and fvwm shows-up using the 17' Apple flat monitor hooked on the ADC connector, it always ends with a black screen (I guess signall lost as the flashing power ligth on the flat panel means) the only things /var/log/XFree86.0.log reports is bulgroz:~ grep '^(WW)' /var/log/XFree86.0.log (WW) Open APM failed (/dev/apm_bios) (No such file or directory) (WW) RADEON(0): Video BIOS not detected in PCI space! (WW) RADEON(0): Attempting to read Video BIOS from legacy ISA space! (WW) RADEON(0): Video BIOS not found! (WW) RADEON(0): Video BIOS not detected, using default PLL parameters! trying to use Option UseFBDev true I get the same warnings but I also get (EE) RADEON(0): FBIOPAN_DISPLAY: Invalid argument Eric PS if it could matter my XF86Config is visible here URL:http://www-alt.pasteur.fr/~edeveaud/Misc/XF86Config-4 -- Entendu sur France Inter : Journaliste : Vous préférez cliquer sur le mulot ou sur la souris ? Jospin : Les deux, je cohabite ! -+- in: Guide du Cabaliste Usenet - Bien cohabiter avec son mulot -+-
Re: Installer doesn't see the drive on a dual 867
On Tue, 12 Nov 2002, Pan wrote: I tried swaping the drive to the ATA66 bus... but after doing so and being able to install the base system, I get a white screen when I boot up. I can't even get to the Open Firmware prompt... and not even pressing option gives me a list of available drives to boot from... [OT] please answer under the previous post it's easier to read and netiquette compliant you should boot under OF (press option-commande-o-f at boot chime) your disk is located under ultra2 you should use the following command boot ultra2:#,yaboot where # is the number of your Apple_Bootstrap partition alternatively, you can boot on the install CD, execute a shell, mount the partitions and chroot to /target in order to fix your settings. Eric -- Bon, je recherche toujours un mec qui touche sous linux sur rochefort Il m'arrive de toucher, mais dans ces moments la, je pense pas trop a linux. -+- ST in Guide du linuxien pervers : Linux c'est une affaire de doigté
Re: Modem on G4 PowerBook
On Fri, 8 Nov 2002, Gilger.John wrote: The modem on my G4 PowerBook (Ti 550 MHz) seems to be a winmodem. Is there a linux driver for it somewhere? regarding the generation of your tiBook, the modem is either a standard modem hooked on /dev/ttyS0 and stock driver should do the job either a usb modem and yoou should use the mar Bouchier driver see URL:http://www.mbsi.ca/cnxtlindrv/ it's a binary driver with a big shell script wrapper. Eric -- Les gens sérieux et raisonnables n'utilisent pas de kill-file. -+- GM in http://www.le-gnu.net : Soyons ridicule jusqu'au bout -+-
Re: Installer doesn't see the drive on a dual 867
On 9 Nov 2002, Benjamin Herrenschmidt wrote: but BenH recommend to not use the disk for important datas (as the whole system is) So far, I didn't get any report of problems with it though. OK, I'll open the box and try to put the main disk on the ATA100 bus, and tell you the results. as the machine is not fully set-up, I don't mind loosing any datas. Eric -- S Je cherche aussi des adresses de lieux contenant des fossiles dans S la région parisienne http://www.senat.fr/ -+- DP in http://www.le-gnu.net : La dianurette et les fossiles -+-
Re: running debian on a mac laptop
On Sat, 2 Nov 2002, Rogério Brito wrote: On Nov 02 2002, Eric Deveaud wrote: other fact to consider, is that iBook is much more robust than tiBook. I don't know about this. see some news group related to Apple hardware, and you will find lots of reports regarding combo problems, ethh/usb connectors problems (it's really painfull to unplug the eth cable from the connector on the tiBook. but it's only a G3 Yes, and this speaks huge volumes. See the archives for all my struggles trying to get DVD playing on my late 2001 iBook2 (600MHz) under Linux. I agree with this. The lack of vectorial instructions really makes a difference. OTOH, everything else works ok on this machine (besides it being dog slow). The battery life is nice, though. it depends on the use you're planning to do with the machine. ;-) for me the pismo 500 is much than enough. Oh, and do not even attempt to use MacOS X unless you have huge quantities of RAM (the iBook has a limit of only 640MB, which OS X is apparently able to fill quite quickly -- Linux's programs, OTOH, seem to use memory with a lot of parsimony). I also use (dualboot) MacOSX from times to times, on my pismo with 384MB ram, and I can tell it works. but it still slower than linux on the same box. Eric -- Alcotest OUi, mais aussi pour la création des 2 autres ducon, Expliquez moi, pourquoi voulez vous créer deux autres ducon ? Vous vous sentez seul ? -+- FF in Guide du Neuneu sur Usenet - Les deux font l'impair -+-
Re: MountX?
On Sat, 2 Nov 2002, eric wrote: i just can't remember the exact name of my other kernel.. and am not looking forward to starting all over over again. you don't need to install over and over, remember linux is neither MacOS neither windows, ther's always a solution. boot on the installer CD, and go to the console (either execute a shell installer entry, either by pressing option arrow.) console2 gives you a minimalistic but usefull shell. mount your partition fix your settings, and voila ;-) Eric -- Alcotest OUi, mais aussi pour la création des 2 autres ducon, Expliquez moi, pourquoi voulez vous créer deux autres ducon ? Vous vous sentez seul ? -+- FF in Guide du Neuneu sur Usenet - Les deux font l'impair -+-
Re: install MacOSX after Debian GNU/Linux
On 1 Nov 2002, Soeren Dam wrote: Has anyone experience installing MacOS X after Debian GNU/Linux ? yes on my powerbook I am VERY tired of Macos 9.x beeing unstable and reeinstalling it. I've seen on the internet that almost all manuals suggests that you install MacOSX FIRST and Linux afterwards. Why is that ? Has anyone tried to install MacOS X after Linux ? not an answer just a story. I ve done the same thing than you on my dual boot machine, wipped MacOS9, to put Jaguar. Jaguar Instalation was smoth an easy. but after reboting I was surprised by the fact that MacOS X boot directly, I have losed the OF chooser. I was thinking about a pram modification done by MacOS X. And yes MacOSX wipped the OF boot-device and so on (as printenv shows me under OF) Reseted the pram with the magic key combo (option-command-p-r at boot chime) but the problem remains. I finaly found by booting on a debian install disk and switching to the shell, that my partition scheme was altered. When I installed linux, I've reordered my parition in order to have the Apple_Bootstrap in position 2 (it was physicaly the 9th). MacOS X instalation put it back on position 9. just using the mac-fdisk r, to restore the partition order, and running ybin command restored the things Eric -- BJ Certes, la charte autorise de s'éloigner du sujet BJ en cours d'enfilade. Ça ne doit pas être très pratique. -+- MT in http://www.le-gnu.net : J'avance, tu recules -+-
Re: share data with macos
On Fri, 1 Nov 2002, Jean-Christophe Michel wrote: Hi all, I need to put some data on my mac hfs partition on a dual boot pwbk. But i cannot mount partition in writable mode: mount -t hfs -w /dev/hda12 /mac mounts it in read only... no I guess that you don't have the rigths to writte to /mac. what is the output of ls -ld /mac ?? I use an fstab entry to mount the hfs shared partition between MacOS-X and debian. this allow the group 110 members to read-writte on this partition. # the mac-linux sharing space /dev/hda17 /machfs rw,gid=110,user,noauto0 0 we just use mount /mac and umount /mac. (as we just use it from time to times) Eric -- BJ Certes, la charte autorise de s'éloigner du sujet BJ en cours d'enfilade. Ça ne doit pas être très pratique. -+- MT in http://www.le-gnu.net : J'avance, tu recules -+-
XFree86 4.2.99.2 / radeon 9000
Hi, I'm trying to set up X with a radeon 9000 with a 17'' Apple flat pannel plugged on ADC my kernel is a fresh 2.4.20-pre11-ben0 from Tue Oct 29 with # CONFIG_FB_RADEON is not set CONFIG_AGP=y CONFIG_DRM=y CONFIG_DRM_RADEON=y I've got the X sources by CVS-ing it from xfree86.org build was OK, but now I figthing with the configuration. as far as I see on the logs, X starts, detect the card, load the good driver (ati and sub module radeon) that claims to support radeon 9000 but all I get is a black screen and the flat panel power ligth flash 3 times , I have to kill X by ctrl-alt-del but the problem, is that this black-screen remains even after killing X I have to blind type or ssh to the machine or reboot in order to continue ;-( the logs reports no errors, just warnings about APM, DRI (DRI will be the next step) and clomplians about radeon vbios. (WW) RADEON(0): Video BIOS not detected, using default PLL parameters! has anybody succeded on setting X with this combination radeon9000/17'' flat panel. Eric PS log and config are visible here URL:http://www-alt.pasteur.fr/~edeveaud/Misc/XFree86.log URL:http://www-alt.pasteur.fr/~edeveaud/Misc/XF86Config-4 -- on te dit de te bouger les fesses, prend toi en main, Moui , je vois , incitation à l'onanisme. Mais techniquement parlant votre proposition ne tient pas la route. C'est la main qui doit bouger , pas les fesses. -+- DT in fuad: de la relativite de mouvement -+-
Re: XFree86 4.2.99.2 / radeon 9000
On Thu, 31 Oct 2002, Eric Deveaud wrote: I'm trying to set up X with a radeon 9000 with a 17'' Apple flat pannel plugged on ADC not reaaly an answer, but just some new insigth on the problem kernel inclusion of CONFIG_FB_RADEON results on lost signal with the flat panel plugged on ADC but with the same settings, an iiyama CRT plugged on the DVI via a DVI/VGA adaptator shows the console and X is working OK. it seems, that the problem is related to the ADC port. Eric -- Crétin anonyme vous etes un abruti ! Je ne pretends pas le contraire, la preuve je vous parle. -+- SM in http://www.le-gnu.net : Léon est un con -+-
Re: Problems with kernel 2.4.20-pre11-ben0 (worked fine)
On Tue, 29 Oct 2002, José Salavert Torres wrote: Package:kernel Version: 2.4.20-pre11-ben0 No sound, and no net, but drivers load properly, and older versions (pre7) worked okay. Machine: Powermac G4 733Mhz grey-tower. Your Kernel config shows that you are using sungem, for eth. I'm experimenting problems with the couple sungem/dhcp. I suspect the client, but I haven't looked too much, setting eth to static solve the problem. just my poor contribution. for sound, as I don't care for the momment I have no idea. Eric -- Si la connerie était cotée en bourse,tu serais incarcéré pour délit d'initié... -+- EB in: Guide du Cabaliste Usenet - Les initiés ont la cote -+-
Re: Problems with kernel 2.4.20-pre11-ben0 (worked fine)
On Wed, 30 Oct 2002, Vincent Bernat wrote: OoO En cette aube naissante du mercredi 30 octobre 2002, vers 07:24, Eric Deveaud [EMAIL PROTECTED] disait: I'm experimenting problems with the couple sungem/dhcp. I suspect the client, but I haven't looked too much, setting eth to static solve the problem. just my poor contribution. I have experienced many problems with ISC DHCP client. Switching to pump (apt-get it and remove the other one) solved most of them. I haven't tested yet the client, cause I'm diving in the joy of setting X with the radeon9000 ;-( currently I'm hapy enough with the static ip, even if it's not what I wanted, but it works. ;-)) I'll give a look to pump, I added it to my todo list for the machine set-up. Eric -- Je recherche une docmentation sur la fonction pipe et un exemple si possible. -+- D in http://neuneu.mine.nu : Accord parental souhaitable -+-
Re: New at this
On Sun, 20 Oct 2002, S. Wendel P. Schultz wrote: Well, I have an old world PowerPC 8600/250 and want debian on it. I have 160MB of RAM, so I figure I'll have a pretty decent little box. I have downloaded the first installation .iso and cut it; I don't know where to go now. I can't figure how to get it to boot from the CD I made. This machine is of familly OldWorld PowerPC you could not boot it from the debian CD. You should use BootX, in order to boot Eric -- - Papa ! Papa ! PApppa ! - Oui Ben qu'est-ce-qu'il y a ? - Y'a quelqu'un qui a touché à mon kernel ! +BL in Guide du Macounet Pervers : MOSXS est un long fleuve tranquille+
Re: kernel biG4 1.25
On Fri, 18 Oct 2002, Benjamin Herrenschmidt wrote: Ok, since the ATA-100 may be the culprit, you may also try to edit drivers/ide/ide-pmac.c Just before line 995, add a return; statement (that is just before the pci_device_from_OF_node call). I think I THANK'S it does it, it allows to boot. The machine is up and running. Eric -- il y a quatre mots dans votre phrase et si vous ne décelez pas les conséquences rhétoriques de vos propres paroles, c'est facheux et vous conduira sans doute à d'autres difficultés d'ordre communicationnelles! -+- PG in http://www.le-gnu.net : C'est cela, oui. -+-
kernel biG4 1.25
Hi, please help I'm going crazy I've installed the computer using the Debian 3.0 CD set. booting the 2.4.18-newpmac kernel everything went OK, except that just one cpu is recognized. (correct SMP is not compiled in the kernel) after setting up the minimum (ssh, rsync, compil tools) and rsync'ed the benh tree I'm trying to give this machine the ability to see is second cpu. OK I see the 2 penguins, great my 2 cpu are seen. but but, the problem is that all my tryings^Wefforts are ending with the following boot time error quote hand typed, from an other computer ;-(( pmac-ide: enabling IDE bus ID2 pmac-ide: enabling IDE bus ID0 Machine check in kernel mode caused by (from SRR1=149030): Transfer error ack signal Serial port locked ON by debugger /quote I guess there's something wrong ;-)) but i cant figure out. ay hints will be really apreciated Eric -- rominet Entendu chez HSC : il y a tellment de ports ouverts sur le firewall que netstat -an fait coredump -+- HSC in Guide du linuxien pervers - Bien configurer son firewall -+-
Re: bi-G4 1.25Ghz
On Mon, 14 Oct 2002, Benjamin Herrenschmidt wrote: Santa-claus comes today with this new machine. Hrm... This machine isn't yet pefectly supported, it would help if I could have physical access to one of those for a couple of days (btw. I'm in France ;) sure great I'll be very happy to give you access to the machine. If you come in paris I'll give you entire access to this one. feel free to keep in touch with me for more precision. You may have better luck with my kernel than with debian stock though. as usual is a little bit more up-to-date no ?? ;-)) The ata100 isn't yet supported. It might detect the disk with my latest tree, but I don't suggest relying on it too much, I haven't yet figured out the proper timings for this controller. no problem, as I'll plan to use the IDE drive to store some huge flat files, it is not crucial for me to plug the disk on the ATA66 bus instead of the ATA100 Or you can just put the kernel, yaboot yaboot.conf on an HFS or HFSplus partition of your HD and boot that from OF (boot hd:partition,\yaboot). The yaboot.conf would be setup to load the kernel from the HD and the install ramdisk from the CD. that was my meaning, as I've done for the pismo, when it was in the begining of support, it was yet with your kernel tree) Thank's for your answer. and once again if you wish to get hands to play with my new toy, do not hesitate. Eric -- Pentiun /// ... (was Re: pentium III) ... le processeur adidas pour les internautes en pantoufles!-) -+- RM in Guide du Macounet Pervers : Juste fais le! -+-
Re: bi-G4 1.25Ghz
On Tue, 15 Oct 2002, Fred Heitkamp wrote: I have similar problem in that I have a ATTO SCSI card that is not supported in the Debian install kernel as well. I have built working kernels myself though. How hard would it be to edit the CD image a put a kernel that works for me on it? there's a more easy way to perform the installation. copy the kernel yaboot, yaboot.conf and ramdisk on an HFS partition of your IDE drive. eg for yaboot.conf init-message = what you want\n timeout = 50 default = install # replace NUM with the correct value. image=hd:NUM,vmliux label=install initrd=hd:NUM,ramdisk.image.gz initrd-size=8192A boot the machine under OF, and boot the linux installation using boot hd:NUM,\yaboot Eric -- je suis en train de pouffiner ma conf sous SUSE (distrib intéressante :-) et j'envisage de tester ensuite la RH 6.0, juste pour voir... -+- OP in GLP : bien pouffiner sa conf ou le contraire -+-
bi-G4 1.25Ghz
Hi, Santa-claus comes today with this new machine. I've asked him to add a SCSI card and a 73Gb SCSI disk, in order to put linux. the SCSI card is an adaptec 29160N whille trying to boot on the debian-30r0-powerpc-binary-1, bad luck, neither the ata100 drive, neither the SCSI disk are seen. as far as I've understood my google search, I have to switch the drive from the ata100 to the ata66 bus in order to be able to use it under linux. This is the easy part. and for the adaptec card support, I have to compile a fresh kernel 2.4.7 is there an iso of an install disk including such a kernel with the 29160 driver ? if not I'll build a kernel on my pismo, an boot from disk as I will perform a network install. In this case I would like to know which is the magic incantation to boot from the internal IDE drive. More exactly the way to find the device name under OF. I've done this long time ago while installing my pismo, but I don't remember the vaudou OF incantation. thank's Eric -- Bref, me dire que j'ai peut-être contribué, ne serait-ce que d'un epsilon, à la propagation de serveurs compatibles avec FrontPage me flanque des remontées gastriques peu reluisantes. -+- FM in Guide du Macounet Pervers : Bien préparer sa digestion -+-
Re: ieee1394 some problems.
On Wed, 9 Oct 2002, BuG wrote: On (09/10/02 17:45), Eric Deveaud wrote: Did you enable SCSI Support, SCSI disk support and SCSI generic support while compiling the kernel? Yes as the firewire disk are maped as scsi drive I include the SCSI support either as modules either compiled in the kernel, but in both case I have no luck with the Lacie disk. I have a firewire CD-RW and it works perfectly. Initially I used to compile these options as modules and it was a little bit unstable, now I have them compiled in and I can't report any problem. I guess I'm close to succes ;-) but I'm also guessing I miss an obvious point. Eric -- Mettre d'un coté ceux qui nous pompent l'air, de l'autre ceux qui brassent du vent. Nous obtiendrons un Usenet climatisé, c'est ça le génie français. Ca risque même d'être un peu trop ventilé. -+- MP in http://neuneu.mine.nu : Clim et châtiment -+-
ieee1394 some problems.
Hi, for the little introduction story. I'm trying to validate the use of an external firewire harddrive, for one of our scientist here in pasteur. I ask me if it could plug and use his external 30Gb Lacie firewire drive on his PB-G4 under linux. I've tell him, let me try on my PB-G3 before formating your powerbook. Know the problem. I've grabed the last Ben's Kernel sources, compiled the fresh kernel building ieee1394, ohci1394, sbp2 (and related i2c bit-padding interface) as modules. installed everything, rebooted everything went OK yoko:~ uname -a Linux yoko 2.4.20-pre9-ben0 #1 Wed Oct 9 13:25:33 CEST 2002 ppc unknown plugged the disk added ohci1394 and ther is what I got yoko:~ sudo modprobe ohci1394 ohci1394: $Rev: 555 $ Ben Collins [EMAIL PROTECTED] ohci1394_0: Unexpected PCI resource length of 1000! ohci1394_0: OHCI-1394 1.0 (PCI): IRQ=[40] MMIO=[f500-f5000800] Max Packet=[2048] yoko:~ ieee1394: Node 00:1023 has non-standard ROM format (0 quads), cannot parse lsmod gives me yoko:~ lsmod Module Size Used byNot tainted ohci1394 20036 0 (unused) ieee1394 35608 0 [sbp2 ohci1394] when I try to load sbp2, the shell stay stucked whith the following message yoko:~ sudo modprobe sbp2 ieee1394: sbp2: Logged into SBP-2 device Humm I guess I miss something but while RTFMing I did see what what's the buggy point in my howto understanding ?? Eric -- Le neuneu est un con qui débute. C'est une espèce rare mais qui fait beaucoup de bruit. -+- JCD in Guide du Linuxien pervers - Bien configurer son neuneu.
Re: ieee1394 some problems.
On 9 Oct 2002, Claas Langbehn wrote: Hello Try connecting the Firewire drive before booting your Mac. done same problem... Then load the following modules: ieee1394, ohci1394, sbp2, scsi_mod, sd_mod Insmod them in this order or use modprobe. done this way to, but I'm still stuck on ieee1394: sbp2: Logged into SBP-2 device thank's Eric -- Tu as lu les docs. Tu es devenu un informaticien. Que tu le veuilles ou non. Lire la doc, c'est le Premier et Unique Commandement de l'informaticien. -+- TP in: Guide du Linuxien pervers - L'évangile selon St Thomas
Re: ieee1394 some problems.
On Wed, 9 Oct 2002, Philipp Schmidt wrote: the trick iss to load ohci1394 _after_ connecting the device - only then registering the scsi emulation works for the first device, then you can hotplug more devices Hummm pluggin the device while the machine is not booted and trying to load the module is the way I'm working, this means the order you suggest is respected I enjoy my 120GB FireWire HDD on ppc and i386 - works well g ;- my pismo don't want to know nothing Eric -- Je précise que je défends aucunement le contributeur que vous insultez, car vous faites un amalgame entre ses opinions et convictions et le fait qu'il dise donc constamment des conneries. -+- JH in http://neuneu.mine.nu : Bien étaler sa mauvaise foi -+-
Re: Presentation with Free Software
On Wed, 2 Oct 2002, vinai wrote: I've also done this. I used the prosper package (prosper.sf.net) which provides another document class in LaTeX. I've used it also to generate PDF's but for my final presentation, I had to use Acrobat in full screen mode on a PC running XP (double yuk !! :). Using EPS figures from xfig and xmgr resulted in a really clean looking presentation (content not withstanding ;-) ... There's also the magic-point package, that allows to do full scree, animated, and so on presentation apt-get install mgp Eric -- je suis ^?e9tudiant en ^?e9cole d'ing^?e9nieur^?e0Lyon et je suis totalement bloqu^?e9 dansla programmation d'un applicatif qui permettrait dedessiner des sph^?e8res ombr^?e9es. -+- cl^?e9ment in GNU - Tremblement de te^?rre en solde -+-
Re: Yaboot question
On Thu, 19 Sep 2002, Gilger.John wrote: It's a wierd day. I dual boot Debian and MacOSX on my Ti PowerBook. It has been working fine for quite a whiile. Today, I started my laptop and it did not display the usual yaboot screen giving me a choice between OSX and Dabian. It simply booted to OSX (default). have you played with the startup panel on MacOSX ? bye the way if you correctly followed the yaboot-howto eg you've made a Apple_Bootstrap partition in first position (either in position 2 or juste after the crappy Apple[patches|driver]) you'll be abble to solve the prblem, by just resetting the PRAM (hold down comand-option-p-r keys at startup until the machine reboot itself. Has anyone experienced the same or a similar problem? yes because I've played with starttup panel from MacOSX, this will confuse the OF path to the bootloader. Eric -- Le danger si on ne s'en aperçoit pas c'est que le processeur est constamment à 100% de sa capacité, il chauffe donc beaucoup plus et risque de lacher si il est mal ventilé. -+- MZ in le Neuneu Pète un Câble : mon proc est en chaleur -+-
Re: Sleep on desktop system?
On Wed, 11 Sep 2002, Benjamin Herrenschmidt wrote: And like you, I'm still waiting to see if any sleep application has been written for a desktop machine. humm just a stupid question, why to put to deep sleep a linux desktop machine. I assume it should be up and runnig 24/24 7/7 no ? what about cron, waht about long works, what about eth going down, etc etc just a screen sleep, would be enough no ?? Eric -- Tu as lu les docs. Tu es devenu un informaticien. Que tu le veuilles ou non. Lire la doc, c'est le Premier et Unique Commandement de l'informaticien. -+- TP in: Guide du Linuxien pervers - L'évangile selon St Thomas
new G4, radeon9000 support
Hi, my boss told me that christmas is comming now, I can order a new bi G4. with a 17' ADC flat panel I think I will order the following: biG4 1.25GHz 1Gb SDRAM 2 UltraSCSI 72 Gb ATI Radeon 9000 SCSI card I want to now about the Xfree support of the radeon9000 (I don't want a nvidia card) As far as I understood the Xfree documentation, the radeon familly is supported. am I correct, or should I order an other card Thanks for any hint Eric -- Cela n'a rien à voir avec un filtre. Je suis désolé, mais poster un cancel sur son serveur qui est relié à d'autres serveurs est bel et bien un abus. -+- JH in http://www.le-gnu.net - Tu t'es vu quand t'abus ? -+-
Re: new G4, radeon9000 support
On 20 Aug 2002, Michel Dänzer wrote: On Tue, 2002-08-20 at 11:49, Eric Deveaud wrote: my boss told me that christmas is comming now, I can order a new bi G4. with a 17' ADC flat panel You've got a nice boss. :) isn't it ;-)) I want to now about the Xfree support of the radeon9000 (I don't want a nvidia card) As far as I understood the Xfree documentation, the radeon familly is supported. am I correct, or should I order an other card Well, the 9000 series is the third generation of Radeon cores, and AFAIK it might be different enough to the earlier generations for it not to work out of the box. However, ATI has already submitted a patch to XFree86 to add support, it should be in 4.3.0 and could probably be backported if necessary. Well thank's it will remember me the first days fighting with the rage 128 on my (too new) pismo 2 years ago ;-) I'll also can try to refurbish an old pci graphic card if I'm completly unsuccessful in setting X thank's Eric -- GR Qui est le rédacteur en chef de Usenet-fr ? RG Faut regarder dans l'ours (m'est avis qu'il va pas être d'accord). Grmbl ! -+- LC in http://www.le-gnu.net : L'est pas d'accord l'ours -+-
Re: list of packages
On Tue, 16 Jul 2002, Lars Noodén wrote: I would like to do a fresh install, but record all the packages I currently have. How do I get a clean list of packages without truncated package names and without all the crud that dpkg -l produces? man dpkg and take a look at dpkg --get-selections dpkg --set-selections Eric -- Toute non, seul une petite bande de macintoshiens résistent encore et toujours à l'envahisseur ouindoze. Leur force, ils la tirent de leur potion magique : MacOS, préparée par leur druide Steve Jobs. -+- SC in Guide du Macounet Pervers : Ils sont fous ces Beurkistes! -+- -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Why is quik statically linked?
On 15 Apr 2002, Jens Schmalzing wrote: I've been happily using quik for some time, so I'd like to adopt the Debian package. Can anybody give me a reason why the quik binary should be statically linked? just an hypothesis and a guess. hyp: quik allow single boot = minimalistic environment guess: quik staticaly linked is able to do his work on such an environment, quik dynamicaly linked will not. am I wrong ?? Eric -- donc, si tu n'en a rien à foutre tu ne lis pas les mess qui ne te sont pas adressés, c'est le problème de poster sur plusieurs forums, tu parles au charcutier, et c'est la saucisse qui te répond :-) -+- Sandra in GNU : Si six neuneux scient six saucisses -+- -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
wacom palette
Hi, I've just set my kernel to recognise the wacom graphire palette. evrithing is OK. Is there a tool/tip/hack that allow someone to configure the behaviour of the pen-buttons ?? as the comercial wacom tools allows you to configure the behaviour of the palette. I would like to disable, the click on tap on the palette, remap the buttons, etc. thank's in advance. Eric -- Je pensais que seul le corps des messages pouvait être cancellé. J'avais suggéré de mettre le message DANS LES TITRES ! Or, aucune trace des posts n'apparaisse. ON NE PEUT MEME PLUS DEVINER! -+- CS in : Guide du Neuneu d'Usenet - Le régime cancel -+-
Re: Kernel 2.4.17
On Sat, 16 Feb 2002, Ricardo Pardini wrote: I use BootX. Is there some way smarter than this to install new kernel? take a look a quik. Can I somehow mount the MacOS partition and write vmlinuz there? yes, you can use a spare partition (HFS or DOS formated). on my 9600 I use a 500Mb (HFS) shared partition. I mount it when I need to transfer some files from linux to MacOS (vmlinux for example). Just one note, I notice that erasing files on ths one from the linux side is not recomended. I recomend that the wipping stuff to be done on the MacOS side. dunno why... Eric -- CM: Faut-il nommer un modérateur suppléant à Christophe Wolfhugel ? MG: Faudrait savoir ce qu'il en pense ? Va-t-il répondre : « Rien » ? CW: Non. -+- in: Guide du Cabaliste Usenet - Euh... Non, rien. -+-
Re: Beige G3 won't boot
On Wed, 13 Feb 2002, Bertram Bourdrez wrote: Ah, thanks. I still have a few questions remaining... will I need to download the entire Debian CD or can I get away with getting some files into MacOS through sneakernet? no you don't need to download the entire Debian CD, just fetch vmlinux and ramdisk.image.tgz boot with bootx using vmlinux and pointing to the ramdisk.image and perform a network instalation via http, ftp or nfs. Eric -- On dit que seulement dix personnes au monde comprenaient Einstein. Personne ne me comprend. Suis-je un genie ?
[newbie] ram and network problems.
Hi. I'm facing a strange behaviour. and I'm very curious to know/understand more about it. the computer (PowerMac 9600) the RAM (32 Mb) when the ram is plugged on. network become quitte unreachable. ie, ping lost between 75-85% paquets ssh to other mahine fail fpt can't reach any host but in the same time I can perform heavy compilation/calculs/etc... it just affect the networking stuff. NB the problem is not dependant on the slot I plug the ram neither interleaving. NB2 memory tools under MacOS (guru, techToolpro) claims there is no problem with this. when ram is unplugged, everithing is OK I don't complain, I can live without this extra 32Mb, but I would like to know what appens. did it happens to one of you ? what could be the reason ? Eric -- un tentative de penetration (pas de sous entendus) d'un systeme peut etr compare a un viol. Le portscan reviendrait a promener ses doigts pour voir s'il y a une ceinture de chastete ... -+- M in GNU - Petit traité de sexualité informatique appliquée -+-
Re: zip mediume question ?
On Wed, 6 Feb 2002, Michael Schmitz wrote: why the zip drive, removable disk, is tested while there is no medium ?? is there a way to correct/enhance this. The simplest way to tell if there's media in the drive is to try and read the drive's capacity, then figure out what the error message means. IOW: assume it's a fixed media drive until proven wrong. A more complicated way would be OK I see. thank's for the explanation. but may I ask a stupid question, how CD is handled ? it's also a removable media. and I have never seen such a message Eric -- S Supprimons donc ces termes. Car, quelle importance que de savoir qui S fait l'homme ou qui fait la femme dans un couple hétérosexuel ? Je ne sais pas. Généralement je me contente de faire l'andouille. -+- pH in http://www.le-gnu.net : L'andouille de vire sa cuti -+-
adding a keycode to a keymap ?
Hi, as I'm using an apple extended keyboard, I would like to use the 3 separated keys F13 F14 and F15 as mouse button_emulation F13 and F14 are Ok, as they are respectively mapped to keycodes 99 and 70 but unfortunatly F15 under showkey, gives me keyboard: unknown scancode e0 45 is it possible to add a definition for this key. thank's Eric -- TN : Désolé mais cette expression n'a aucun sens ... SP : Il est informaticien, alors, tant que tu compiles pas, ses paroles : n'ont aucun sens... -+ SP in Guide du Macounet Pervers : Bien Compiler Son Informaticien +-
zip mediume question ?
Hi, once again a little help needed... the powermac 9600 I'm setting up, has an internal zip drive located on /dev/sdc (as told by dmesg, see relevant part bellow.) at boot time when there is no zip in the drive, dmesg complains about READ CAPACITY failed and kernel is assuming that lock size assumed to be 512 bytes, disk size 1GB. humm I would like that my zip drive could be used as jaz drives ;-)) why the zip drive, removable disk, is tested while there is no medium ?? is there a way to correct/enhance this. mesh: target 3 synchronous at 5.0 MB/s Vendor: MATSHITA Model: CD-ROM CR-8024Rev: 2.0f Type: CD-ROM ANSI SCSI revision: 02 Vendor: IOMEGAModel: ZIP 100 Rev: J.03 Type: Direct-Access ANSI SCSI revision: 02 scsi2 : 53C94 [SNIP] Attached scsi removable disk sdc at scsi1, channel 0, id 5, lun 0 [SNIP] sdc : READ CAPACITY failed. sdc : status = 1, message = 00, host = 0, driver = 08 Current sd00:00: sense key Not Ready Additional sense indicates Medium not present sdc : block size assumed to be 512 bytes, disk size 1GB. sdc: I/O error: dev 08:20, sector 0 I/O error: dev 08:20, sector 0 unable to read partition table Attached scsi CD-ROM sr0 at scsi1, channel 0, id 3, lun 0 sr0: scsi-1 drive Thank's again Eric -- donc, si tu n'en a rien à foutre tu ne lis pas les mess qui ne te sont pas adressés, c'est le problème de poster sur plusieurs forums, tu parles au charcutier, et c'est la saucisse qui te répond :-) -+- Sandra in GNU : Si six neuneux scient six saucisses -+-
Re: zip mediume question ?
On Tue, 5 Feb 2002, Charles Sebold wrote: On 23 Shevat 5762, Eric Deveaud wrote: Not sure why it says this, but that doesn't affect the usage of the drive. rigth it still useable. why the zip drive, removable disk, is tested while there is no medium ?? is there a way to correct/enhance this. I find it strange, and was surprised by the message, I think it was handed the same way as CDrom. If you put a ZIP cartridge into that drive and mount it appropriately using sdc1 or sdc5 or whatever the partition ends up being on there, it will work just fine, and the computer will realize that it's not a 1GB cartridge and treat it right. yes it mounts perfectly. I have used both 100MB and 250MB ZIPs this way and they just work, whaooo, I'll try a 250M as soon as possible. You can read and write whatever filesystems are supported with your kernel, HFS, FAT, and you can even format the ZIP ext2 and make it Linux-only if you like. it's yet done. zig:~ cat /etc/fstab /dev/zip /zip ext2defaults,user,noauto 0 0 /dev/zip /zip-mac hfs rw,gid=110,user,noauto 0 0 I use it as 1) a share disk between various computers. 2) share zone between MacOS/Linux Thank's -- Chalut la foule , ça veut dire regardez ce que je vais répondre à l'autre, déjà c'est une remarque méprisante envers quelqu'un qui ne t'a rien fait -+- Fr in GNU - Ch'est chcandaleux : che me chui fait inchulter ! -+-
Re: PowerMac 9600 video questions
On 2 Feb 2002, Michel Dänzer wrote: On Mit, 2002-01-30 at 14:01, Eric Deveaud wrote: PowerMac 9600 video card IMS Twin Turbo (IMS,tt128mb8A) booted with BootX kernel 2.4.18-pre7-ben0 with CONFIG_FB_IMSTT=y booted with BootX 1) when giving extra kernel argument video=imsttfb with or without force video setting the machine boots fine, but after the few first kernels messages the screen goes black I don't see any kernel boot messages, I have to type blinkly.. or ssh the machine in order to reboot Anything from imsttfb in the kernel output? Maybe you have to tell it the mode to use? I'll try to pass some mode. 2) setting XF86Config-4 to use Driver imstt VideoRam8192# the 9600/350 comes with 8Mb on card and startx gives me something like uper half screen with a kind of display the other (lower half) black. furthermore, the upper half part is cutted in 2 parts (left rigth) Is this the same for all depths? it vary following deep and screen-size requested. furthermore /var/log/XFree86.log tells me the following (--) imstt(0): probed videoram = 3072k It would be interesting to know what imsttfb thinks about this. :) I would like to know to... I don't know the status of the imstt driver on powerpc; it could be plain broken. You could also try the fbdev driver. fbdev allows me to use 1200*1024 at deep 15. deep 24 hangs, and deep 16 complety screw up the color map. Thank's for your input. Eric -- Pourquoi est ce que France Info nous donne toutes les heures les cours de la bourse et non pas le nombre de chomeurs?
perl5.6.1 and automake1.5
Hi, just a dumy question. my woody box presents some problems with automake-1.5 ig:~ dpkg -l |grep perl ii libperl5.6 5.6.1-7 Shared Perl library. ii perl-5.005-bas 6.3 Transitional package. ii perl-base 5.6.1-7 The Pathologically Eclectic Rubbish Lister. as I need automake-1.5 and woody just provides 1.4 I grabbed automake-1.5.tgz un-tar-zip'ed it ./configure --prefix==/opt make until this point everithing is OK but trouble appens when I try to run make check (145 test of failed) make check VERBOSE=1 point's me to a perl related problem... well I've installed perl-5.6.1 by hand in opt and now make check succeded. what can I do to investigate more precisely this problem in order to help. Eric -- Un detail, je suis sur Unix... Redemarrer un systeme Unix fait generalement apparaitre dans mon bureau entre 1 et 3 ingenieurs systeme a l'humeur agressive voire violente. -+- VS in Guide du linuxien pervers - De l'art de faire apparaître des IS
Re: perl5.6.1 and automake1.5
On Fri, 1 Feb 2002, David Roundy wrote: woody does have automake 1.5. It's called automake1.5. OK but what the perl5.6.1 deb is mising ??? Eric -- netmask: host name lookup failure netmask en short dans le DNS. -+- CB in Guide de linuxien pervers - Réseau en vacances, repassez plus tard
Re: PowerMac 9600 video questions
On Tue, 29 Jan 2002, Eric Deveaud wrote: On 29 Jan 2002, Michel Dänzer wrote: The ati driver only works with ATI chips. ;) Try imstt or fbdev. OK the story is continuing the context PowerMac 9600 video card IMS Twin Turbo (IMS,tt128mb8A) booted with BootX kernel 2.4.18-pre7-ben0 with CONFIG_FB_IMSTT=y booted with BootX 1) when giving extra kernel argument video=imsttfb with or without force video setting the machine boots fine, but after the few first kernels messages the screen goes black I don't see any kernel boot messages, I have to type blinkly.. or ssh the machine in order to reboot I have to boot with video=ofonly in order to get the console screen. 2) setting XF86Config-4 to use Driver imstt VideoRam8192# the 9600/350 comes with 8Mb on card and startx gives me something like uper half screen with a kind of display the other (lower half) black. furthermore, the upper half part is cutted in 2 parts (left rigth) something like that +-+-+ | | | useable quarter | | | like mirrored of the useable | | | quarter +-+-+ | | | Black| | | +-+-+ furthermore /var/log/XFree86.log tells me the following (--) imstt(0): probed videoram = 3072k Thank' for any advice. Eric -- fgu Je reviens sur mon post de 11h27 : Au lieu de :2ème DD en fgu Secondary Master (SM) ce serait plutôt : 2ème DD en Primary fgu Slave (PS) -+-Guide du Neuneu Usenet-La dialectique du maître et de l'esclave-+-
PowerMac 9600 video questions
Hi, I'm setting up a powerMac 9600/350 (currently 128Mb ram but should jump to 512 soon) with 2 HD (2Gb MacOS / 9Go Debian woody) install method was: get Ramdisk.image.tgz vmlinux from potato boot with BootX minimal NFS potato install edited /etc/apt/sources.list to point to woody apt-get dist-upgrade. I was unable to install woody directly, it always fail when looking at Release or basedebs.tgz runs 2.4.18-pre7-ben0 from this morning rsync. currently everything runs fine, except X dmesg gives me the following (selected parts) MacOS display is /bandit/IMS,tt128mb8A Using unsupported 1024x768 IMS,tt128mb8A at 9220, depth=32, pitch=4096 Console: switching to colour frame buffer device 128x48 fb0: Open Firmware frame buffer device on /bandit/IMS,tt128mb8A lspci shows me the following zig:~ lspci -v 01:0b.0 Host bridge: Apple Computer Inc. Bandit PowerPC host bridge (rev 03) Flags: bus master, medium devsel, latency 32 01:0f.0 Display controller: Integrated Micro Solutions Inc. IMS9129 [Twin turbo 128] (rev 01) Flags: bus master, medium devsel, latency 32, IRQ 29 Memory at 9200 (32-bit, prefetchable) [size=16M] Expansion ROM at 9000 [disabled] [size=64K] I have configured /etc/X/XF86Config-4 this way Section Device Identifier hummm Driver ati BusID PCI:1:15:0 Option UseFBDev EndSection BUT cause ther's always a but. ;-)) startx faill and complains this way (taken from /var/log/XFree86.0.log) (EE) No devices detected. Fatal server error: no screens found on other hand /var/log/XFree86.0.log shows me the following (--) PCI: (1:15:0) IMS TwinTurbo 128 rev 1, Mem @ 0x9200/24, BIOS @ 0x9000/16 the card was probed on the expected BusID. I must tell , that I'm going crazy, and have a big headache trying to figure out where's the problem Thank's in advance for any help/input/tip ;-)) Eric PS I can put on a web page the full XFree86.0.log, XFXF86Config-4 and output that could help. -- PM: je pense que comme moi, bcp de gens attendent d'avoir un G4 bo proc CF: C'est vrai que si le proc est assez bô, ce n'est vraiment pas la peine qu'il y en ait deux ;-) -+- CF in GMP - Biproc : t'as beau pas être beauuu... ohohoho -+-
Re: PowerMac 9600 video questions
On 29 Jan 2002, Michel Dänzer wrote: The ati driver only works with ATI chips. ;) Try imstt or fbdev. OK I fix that. Thank's Eric -- Toutes sociétés, macro ou micro necessite son punk... Un vrai regal !!! -+- DeadEnd in NPC : La subversion, un suppo et au lit ! -+-
Re: boot problems after install on Pismo
On Wed, 23 Jan 2002, Rory Campbell-Lange wrote: I've gone through the install procedure of potato on a pismo (a new world powerbook). Is there a way of booting linux from the open firmware command line so that I can then run ybin after configuring it? yes boot on cd (as for installation) at yaboot prompt welcome to yaboot blah boot: type the following command hd:linux_root_partition,/vmlinux where linux_root_partition looks like 11 in your case. the pismo should boot on the installed linux. edit /etc/yaboot.conf to reflect your partition s$ etc run mkofboot, run ybin. My partitions: 1-8 Apple Driver stuff 9 Bootstrap (800K) 10 swap (200M) 11 / (8.4G) Eric -- Un detail, je suis sur Unix... Redemarrer un systeme Unix fait generalement apparaitre dans mon bureau entre 1 et 3 ingenieurs systeme a l'humeur agressive voire violente. -+- VS in Guide du linuxien pervers - De l'art de faire apparaître des IS
pmud core99 shutdown
Hello, As I'm so stupid, I let my pismo run out of battery this nigth (just forgotten to plug it ...) this mornig, I found it stopped. I think, well no problem, (except the cpu time lost, and uptime lost ;-) ) pmud should have notice that battery is going out, and should have cleanly shutdown the machine but when I booted the machine, I read the unexpected /dev/NN not cleanly unmounted check forced. Why the computer was not cleanly shuted-donw while looking at the core99 section of /etc/power/pwrctl I notice that warning just display a message eitheir via wall etheir via xmessage, and that's all shall I add a /sbin/shutdown -h now line ?? Eric -- Les risques du métier: Son menton a soudainement quitté la paume de sa main droite posée grace à un coude et sa tête est venue frapper lourdement le bureau. Une fois de plus, un fonctionnaire s'est tué au travail. (Les Nuls)
Re: pmud core99 shutdown
On Fri, 18 Jan 2002, Michael Schmitz wrote: I think, well no problem, (except the cpu time lost, and uptime lost ;-) ) pmud should have notice that battery is going out, and should have cleanly shutdown the machine Nope, it should have put the machine to sleep mode. After considerable time in sleep mode, the battery may still run out. I guess it's the way it happens last nigth. Do you always want to have the machine shut down instead of sleep, even when closing the lid? If so, just add the shutdown command there. no no, I want to close the lid, to put the PowerBook into sleeping mode, go to the library, wake it up, and use th airport network, and finaly go working If you only want the shutdown on power low, look into /usr/share/doc/pmud for the sample powerfail script, configure pmud to send a signal to init on low battery (man pmud), and set up init to run the powerfail script on power status change (man inittab). OK I'll have to go into deeep RTFM whith thse man pages. Thank's for pointing me to the rigth docs. Eric -- E desole mais je n est pas trop l habitude des groupes de discutions Leçon n° 1 : on répond en haut et on vire le message auquel on répond Cette suppression facilite grandement la lecture !!! -+- DrN in http://neuneu.mine.nu : Le Neuneu par l'exemple -+-
Re: Keyboards on PowerPC....
On Mon, 14 Jan 2002, The Doctor What wrote: You know, I actually did that. I have no idea what I was thinking when I turned on CONFIG_MAC_ADBKEYS. I think I probably read the description and saw it could be turned off via a /proc control Of course, you had to be able to login first it still possible to log even with CONFIG_MAC_ADBKEYS just tell the kernel it does sen linux keycodes, using append keyboard_sends_linux_keycodes=1 Eric -- Le problème c'est que NEXTSTEP sans le framework objet, c'est comme une tarte aux pommes sans les pommes. -+- Ol. in Guide du Macounet Pervers : Y'a pas de la Pomme dedans ?-+-
swiching console?
Hi, since I've updated my config to use the keyboard_send_linux_keycodes. I've lost the ability to switch from one console to an other. 1) under console. pressing ctrl-command-fn-F# (fn cause it's a laptop) just spit some garbages characters. alt-(leftt|rigth) arrow allow me to switch from ttyN to ttyN(-1|+1) that's OK 2) under X I can't switch back to console. is there a way to switch from X(tty7) to console(tty1-6), or even to the MOL sccreen (tty8) thank's Eric -- C'est l'automne sur Cybercable et les routeurs tombent comme des feuilles ...mortes. -+- BD in le Neuneu Pète un Câble : le chant des modems désunis -+-
Re: swiching console?
On 11 Jan 2002, Michel Dänzer wrote: On Fri, 2002-01-11 at 10:50, Eric Deveaud wrote: If you're using an Apple keymap, you have to use the Apple key instead of alt/option. ctrl isn't needed in console but shouldn't hurt either. Thank's that's it. Eric -- N La radio pourrait etre incluse dans ce forum. B Dans un groupe s'appelant TV ? fr.rec.radio parle de quoi ? N j'ai dis une connerie ? -+- in: Guide du Neuneu d'Usenet - C'est juste pour être sur... -+- -- Serait-il possible de créer un groupe à vocation plus commerciale pour permettre à ses partenaires de traiter des offres et demandes d'ordre commercial? Après tout, Internet, c'est surtout un espace business! -+-VG in Guide du Neuneu d'Usenet- Les affaires sont les affaires -+-
Re: MOL and kernel 2.4
On Fri, 4 Jan 2002, Derrik Pates wrote: On Fri, 4 Jan 2002, Eric Deveaud wrote: I can start mol as root (sudo startmol) but not as a lambda user. I bet if you started it once as root, then started it again as a normal user, it'd work. sure, as startmol insmod his module, when quitting MacOS the modules remain in kernel, so far the lambda user does'nt need to insmod then it can run startmol without any special privilege. I don't understand, because while browsing this list archive, I've seen several posts claiming that Mol does not need to patch the kernel 2.4 as it must for 2.2 And it doesn't. It has to load the kernel module to provide its kernel-space services, though. OK I'have confused some information. Already done. Call 'startmol --loadonly' in an init script - that will load the 'mol' module and the 'sheep_net' networking module. OK, but this way you let the mol module sleeping in the kernel... I guess I'll adopt this way Thank's Eric -- WIn95 a même réussi à indiquer des millions de couleurs sur un écran alors que celui-ci n'était qu'en 256... Bon faut dire que c'était sur un moniteur plugplay non reconnu par win -+- LT in Guide du Macounet Pervers : le Plug Play selon Redmond -+-
MOL and kernel 2.4
Hi, today was a compil and setting day, but I'm stumped with a MOL problem. - rsynced BenH kernel tree (2.4.17-ben0) and freshly compiled uname -rv gives me 2.4.17-ben0 #2 Fri Jan 4 13:38:08 CET 2002 2) get and compiled from sources mol-0.9.60 added -DEXPORT_SYMTAB to kernel_module/Makefile to compile. edited /etc/molrc to feet my configuration/needs. 3) start mol this is where is the problem. I can start mol as root (sudo startmol) but not as a lambda user. I don't understand, because while browsing this list archive, I've seen several posts claiming that Mol does not need to patch the kernel 2.4 as it must for 2.2 are the only ways to allow mol for a lambda user 1) create a mol group, and play with sudo ? 2) load sheep_net and mol module at startup ? 3) wrapp the startmol to insmod and rmmod the mol modules 4) or I'm completly stupid and missed something Eric PS please don't answer me the solution is number 4 ;-)) -- Pentiun /// ... (was Re: pentium III) ... le processeur adidas pour les internautes en pantoufles!-) -+- RM in Guide du Macounet Pervers : Juste fais le! -+-
Xfree 4.1.0.1 and GetModeline
Hi, while using Xfree on my pismo, everithing is OK but I notice the following on the /var/log/XFree86.0.log file GetModeLine - hdsp: 1024 hbeg: 1048 hend: 1184 httl: 1344 vdsp: 768 vbeg: 771 vend: 777 vttl: 806 flags: 10 GetModeLine - scrn: 0 clock: 65000 repeated and repeated again and again. Could someone explain me what it means. no errors fond in log, the only Warnings I found in the same file are the following: (WW) R128(0): Video BIOS not detected in PCI space! (WW) R128(0): Attempting to read Video BIOS from legacy ISA space! (WW) R128(0): Video BIOS not found! thank's Eric -- Le neuneu est un con qui débute. C'est une espèce rare mais qui fait beaucoup de bruit. -+- JCD in Guide du Linuxien pervers - Bien configurer son neuneu.
2.4.15-pre7-ben0, console and lost lines
Hi, I'm running 2.4.15-pre7-ben0 on my pismo, and while working pn the console the 5 first lines over the 48 availables are lost I mean, they stay on top of the screen, and never refreshed. did I miss something somewhere Thank's Eric -- «Je suis en train de peaufiner les definitions de locales pour le vietnamien; est-ce que pour l'ordre alphabetique les lettres A(, A^, DD, E^, O^, O+ et U+ sont bien considerées comme des lettres à part ?» Pablo in Guide du linuxien pervers : Les locales ? C'est simple !
Re: 2.4.15-pre7-ben0, console and lost lines
On Fri, 7 Dec 2001, Laurent de Segur wrote: It's in this mailing list archive @ http://lists.debian.org/debian-powerpc/2001/debian- powerpc-200109/msg00110.html Thank's humm, I must confess that either I have not searched enough the archive, either my search criterias were not good Eric -- Il y a effectivement écrit FREE en grosses lettres clignotantes sur la page d'accueil [...] ce qui est suffisant pour rendre méfiant n'importe quel organisme vivant plus évolué que le zooplancton. -+- SB in: Guide du Cabaliste Usenet - Bien configurer son neurone -+-
MacOS/MaxOSX/Debian install order
I'm on the way to give install a new machine. I want it to hold debian and (MacOS / MaxOSX). It seems to me that I recall some problems regarding the installation order caused by MacOSX. could someone remaind me the rigth way did I have to install MacOSX first and debian after, or debian and after MacOSX Thank's Eric -- Yep. Moi j'ai un clavier à une touche. Par contre, ma souris a 102 boutons, c'est pas toujours pratique. -+- OG in: Guide du Cabaliste Usenet - Le mulot contre attaque -+-
Re: MacOS/MaxOSX/Debian install order
On 22 Nov 2001, Michel Dänzer wrote: On Thu, 2001-11-22 at 11:06, Eric Deveaud wrote: could someone remaind me the rigth way did I have to install MacOSX first and debian after, or debian and after MacOSX IME MacOSX messes with existing installations so I recommend installing Debian last. Thank's I'll bring up the powerbook partition the disk format and let's go. PS: Nice way of forcing followups to the list. ;) Isn't it ?? but as i'm suscribed to various lists, I'm stuck with all this CC directed to me. Eric -- PM: je pense que comme moi, bcp de gens attendent d'avoir un G4 bo proc CF: C'est vrai que si le proc est assez bô, ce n'est vraiment pas la peine qu'il y en ait deux ;-) -+- CF in GMP - Biproc : t'as beau pas être beauuu... ohohoho -+-
Re: Of Mice and Modems
On Tue, 9 Oct 2001, mmissett wrote: I finally have things up and running on the G4, but I'm stuck on a couple of snags: pppconfig can't figure out where the modem is and it's asking... me. /dev/Stty0 success. Also, startx is failing, saying cannot open mouse (no such file or directory). The mouse in question is an Apple USB optical mouse. My question is: Is the system looking in all the wrong places for things or have I just given it more wrong answers than it can tolerate? /dev/input/mice Eric -- The last good thing written in C was Franz Schubert's Symphony number 9. Erwin Dieterich
Re: Of Mice and Modems
On Tue, 9 Oct 2001, Michael Schmitz wrote: Thanks. I'll try those (Stty0 as opposed to ttyS0, which I did try) Stty0 is a typo. On the Lombard, the modem is at ttyS0. On Wallstreet it's at ttyS1. Just try both. oops thank's for the correction, yes it's a typo. Eric -- à mail and news de microsoft, ont pouvait faire un del total de tous messages sur tous les news groupes (c'est l'un des bugs du logiciel) fort heureusement personne ne l'a vu ou utiliser. -+- J0 in http://neuneu.mine.nu : Docteur Follanews -+-
Re: strange kernels behavior
On Thu, 6 Sep 2001, Damien GUIHAL wrote: OK thanks, now console is running correctly (even login, why now and not before, that's the question), I almost get X keymap working, but, as I'm a french user, i use a french keyboard, and I do not have special characters : pipe, backslash, tilde, ... is any frech user has any advice to give me? check URL:http://www.linux-france.org/article/materiel/mac/#clavier Eric PS tes lignes sont trop longues... -- Et puis c'est vrai qu'Internet sans Microsoft, Hotmail, MSN, Outlook et Explorer, c'est un peu comme une pomme sans ver, ce ne serait pas naturel. -+- MT in Guide du Macounet pervers : Bill a croqué la pomme -+-
Re: Dual booting?
On Mon, 6 Aug 2001, Patrick Klee wrote: Hi, I have an iMac DVSE with MacOS. But I want MacOS to coexist with Debian PPC? I there a HOWTO on acheiving this on a single12 gig hard drive? first of all see URL:http://www.alaska.net/~erbenson the mac-fdisk tutorial after that check the yaboot/ybin sections. NB man yaboot.conf is very informative. Eric -- TN : Désolé mais cette expression n'a aucun sens ... SP : Il est informaticien, alors, tant que tu compiles pas, ses paroles : n'ont aucun sens... -+ SP in Guide du Macounet Pervers : Bien Compiler Son Informaticien +-
benh kernel 2.4.6 + gpm
Hi, I just finished to rsync and compile benh kernel for my pismo(thank's ben for your work) and I notice a problem wille using gpm, with my usb external 3 buttons mouse as I spend a lot of time in console mode, I eavily use gpm. with 2.2.19 everything is OK with benh kernel, when I mouse select something, all caracters turns as strange hierogliphs. and paste gives the same hierogliphs. furthermore, a single left click on the screen gives me a nice caracter representing a smilly face. what happens, I need 2.4.6 for sleep support and airport support here is my /etc/gpm.conf device=/dev/input/mice responsiveness= repeat_type=ms3 type=ps2 append= -- DV: Depuis que j'ai enregistré MacSoup, il arrête pas de geler. GC: Attends le printemps. -+- GV in Guide du Macounet Pervers : faites chauffer MacSoup ! -+-
Re: benh kernel 2.4.6 + gpm
On Mon, 9 Jul 2001, Benjamin Herrenschmidt wrote: with benh kernel, when I mouse select something, all caracters turns as strange hierogliphs. and paste gives the same hierogliphs. You probably have VGA console enabled. You should disable it and do a clan rebuild of the kernel (backup your .config, make mrproper, restore the .config and rebuild) This is a known bug with the console code, I beleive someone will finally submit the proper patch :) OK let's see. yoko:~ grep CONFIG_VGA_CONSOLE /usr/src/linux/.config CONFIG_VGA_CONSOLE=y ok, I clean rebuild. thank's Eric -- Si maintenant on introduit le concept de normalité des bugs, où va l'informatique ? Chez Microsoft ? Ah oui, pas faux ça. -+- GG in Guide du Macounet Pervers : R i F, you'll be Buggified -+-
Re: benh kernel 2.4.6 + gpm
On Mon, 9 Jul 2001, Eric Deveaud wrote: let's see. yoko:~ grep CONFIG_VGA_CONSOLE /usr/src/linux/.config CONFIG_VGA_CONSOLE=y ok, I clean rebuild. thank's it solve the problem. Eric -- ED : (Intel) ne fait que des circuits electroniques. ALG: et quasiment d'un seul type : des 4004 et leurs divers dérivés. : Accessoirement, c'est aussi un fabricant de chauffage d'appoint. -+- ALG in Guide du Macounet Pervers : Bien choisir son chauffage -+-
Re: mozilla - 5 processes using 149Mb
On Tue, 19 Jun 2001, Sven LUTHER wrote: On Mon, Jun 18, 2001 at 02:46:41PM -0800, Ethan Benson wrote: On Mon, Jun 18, 2001 at 04:30:15PM +0200, Sven LUTHER wrote: there should be a galeon package in non-US any time now that mozilla is packaged. having said that you don't NEED a debian package of galeon, its very clean and well behaved for source installation: ./configure make su -c 'make install' And pollute my clean debian install, on way, ... in this case why not ./configure --prefix=/what/you/want Eric -- Entendu sur France Inter : Journaliste : Vous préférez cliquer sur le mulot ou sur la souris ? Jospin : Les deux, je cohabite ! -+- in: Guide du Cabaliste Usenet - Bien cohabiter avec son mulot -+-
Re: Xfree86-4.0.3 - iMac revA
On Sun, 3 Jun 2001, Michel Dänzer wrote: Eric Deveaud wrote: I'll grab the cvs tree to see how it works. Make sure to get xf-4_1-branch or xf-4_1_0, the trunk might be broken. thank's for the advice. I'll let you know it works. Eric -- L'eleve, comme la riviere, aimerait suivre son cours tout en restant dans son lit [Albert Camus]
Re: Xfree86-4.0.3 - iMac revA
On Sat, 2 Jun 2001, Michel Dänzer wrote: Eric Deveaud wrote: X starts correctly, BUT (yes there's a but) all the text is displayed in a `kind of mirror' mode, ie all letter are reversed. It's a driver bug which will be fixed in 4.1.0 and supposedly in the DRI packages I will make available soon. I'll check that as soon as possible. I'll grab the cvs tree to see how it works. Thank's Eric -- Que pensez vous de l'ajout du repertoire point dans $PATH ? Ma version de troll 18.0.32 beta 3 vient de me faire un core dump. -+- SE in Guide du Linuxien Pervers : Bien développer son troll -+-
Xfree86-4.0.3 - iMac revA
I've just installed woody on an old Imac (one of the first one) just to ask about something strange whith the following Device section in XF86Config-4 Section Device Identifier Card0 Driver ati BusID PCI:0:18:0 EndSection X starts correctly, BUT (yes there's a but) all the text is displayed in a `kind of mirror' mode, ie all letter are reversed. eg: I try to represent it __ __ |\ | |__| | /| |__| | \ | | \ - | / | / | | \| | \ |/ | / | while using the following Device section everything is OK Section Device Identifier Card0 Driver fbdev Option UseFBDev EndSection what I did wrong ?? Eric NB here a some more details about the machine running 2.4.5-pre3 Benh kernel lpsci gives me 00:12.0 VGA compatible controller: ATI Technologies Inc 3D Rage Pro 215GP (rev 5c) part of dmesg atyfb: 3D RAGE PRO (PQFP, PCI) [0x4750 rev 0x7c] 6M SGRAM, 14.31818 MHz XTAL, 230 MHz PLL, 100 Mhz MCLK atyfb: monitor sense=73f, mode 6 Console: switching to colour frame buffer device 128x48 fb0: ATY Mach64 frame buffer device on PCI -- CF : les rouleaux à l'intérieur sont plus larges, j'imagine que ça doit : améliorer le contact avec la boule. JMG: C'est vrai que c'est vachement plus agréable... -+- JMG in Guide du Macounet Pervers : Bien nettoyer ses boules -+-
Re: French Keyboard
On Mon, 28 May 2001, jean-michel jim jm daix wrote: Sorry , I¹m French ! ca arrive a des gens tres bien ... ;-)) Well, my problem is that it seems that the map of the keyboard is wrong. It¹s ok, it¹s AZERTY instead of QWERTY but the french Q give me à A too. I¹ve got 2 [A] and no [Q], and it¹s hard to Quit ! the french keymap is a little broken. for a `working one' see URL:http://www.linux-france.org/article/materiel/mac/#clavier for the missing q just remember that you can use the ascii key-codes q=option-1-1-3 (the number must be typed on the numeric keypad) Eric -- je suis ^?e9tudiant en ^?e9cole d'ing^?e9nieur^?e0Lyon et je suis totalement bloqu^?e9 dansla programmation d'un applicatif qui permettrait dedessiner des sph^?e8res ombr^?e9es. -+- cl^?e9ment in GNU - Tremblement de te^?rre en solde -+-
Re: I sometimes lose 'q' key in profit of 'a' using mac-fr3 keymap... (fwd)
On Wed, 2 May 2001, Geert Uytterhoeven wrote: Let's try to fix this 'q' - 'a' problem. It was a real pain for me when I first installed Debian on a mac with a French keyboard: you need to be able to hit 'q' to get out of the fdisk program, and maybe it comes up in other parts of the installation too. This hassle already came up on the mailing list by the way. this is not a sokution, just a tip, just remember that you can use the ascii code to type a letter. for example. q = command 113. for thet you have to type the ascii value on the numerical keyboard, while pressing the command(apple) key. it saves me some times, while installing debian on various Mac, whith azerty keyboards Eric -- A noter que si on a installé Macsbug, on peut avoir accès à une fenêtre bien plus grande, bourrée d'information passionnantes, en couleur et clickodrome. Et tout pour planter geekement son Mac. -+- Ol. in Guide du Macounet Pervers : Savez-vous planter des choux..-+-
Re: USB Mouse Problem
On Wed, 25 Apr 2001, Matt Barnett wrote: This is a pretty stupid question, given all the discussion of the new input layer in the list, but I still don't know the answer. Here goes: I've just installed debian on my rev. a beige g3. Everything works fine, except, of course, that X (specifically xpmac.rev10) doesn't acknowledge my usb mouse. The usb mouse and my usb card are properly detected by the kernel during boot up, so this just seems to be a case of a debian newbie being hit with the input layer changes. xpmac and new inputlayer could be compatible.. as my pismo tolds me in this momment.(I can't break it ie switch to Xfree4, for the momment. I need it in a stable and working state) did you have the /dev/input/mice is your /dev/usbmouse a symlink to /dev/input/mice Eric -- «Ca te derange ??? Je fait ce que je veut si ca te plait pas tu vas ailleurs gros c,, Mis a part ca si quelqun voulait bien me repondre ce serais sympa.» TOTO in Guide du linuxien pervers : Bien préparer sa peut-on acceder avec xterm sous windows agrave; linux en tant qu'utilisateur root, ou avec un utilisateur diffeacute;rent qui a les mecirc;mes droits -+- FML in Guide du linuxien pervers : Bien configurer son article
Re: french keyboard missing | and \
On Thu, 12 Apr 2001, Bruno Waes wrote: euhm, any solution for the french (belgian) keyboard that doesnt have a | or \ character on the keyboard ? or would i have to look out for a new keyb see URL:http://www.linux-france.org/article/materiel/mac/#clavier Eric -- JdCAh non je ne suis _pas_ bien membré et je m'en tamponne joyeusement JdCd'ailleurs. PA Vous pourriez nous décrire cette manoeuvre plus en détails ? -+-in: Guide du Neuneu d'Usenet - L'insondable sexualité des dinos -+-
Re: report install debian on powerbook G4
On Mon, 12 Mar 2001, Ethan Benson wrote: On Mon, Mar 12, 2001 at 06:53:35PM +0100, Eric Deveaud wrote: 4) get the SystemDisk tool from apple URL:ftp://ftp.apple.com/developer/macosxserver/utilities/ with this one note the number of the partition or the shared partition eg: XX i don't understand why you need this utility? cause it's the easiest way to find the partition number, to use in OF, for a newbie like me ;-)) DON'T do disk bootable instead go to the console, copy the linux-kernel-2.2.18 to your /boot partition, name it vmlinux-2.2.18 there is another step, relink /target/vmlinux to boot/vmlinux-2.2.18, then run: mkofboot -b /dev/hdaNN -m /usr/lib/yaboot/ofboot --root /dev/hdaYY where /dev/hdaNN is your Apple_Bootstrap partition, and /dev/hdaYY is your root partition. this will install a working bootstrap on your bootstrap partition making the disk immediatly bootable. after you boot into debian you still need to write your own /etc/yaboot.conf and rerun ybin. instead of that I boot again under OF, and at boot prompt I use hd:YY,/boot/vmlinux-2.2.18 root=/dev/hdaYY setup apt, perform the minimal installation, setup yaboot.conf and run mkofbot at this momment instead use: image=/boot/vmlinux-2.2.18 # or better point to a symlink partition=YY the rest as you have it. hum... it seem that I haven't read enough man yaboot.conf OK I will correct this, also if you kept macos, add a: macos=/dev/hdaCC which is your macos partition. right I forgive to notice that. thanks for the precision, corection you've pointed Eric -- l [e2fsck] a bien démarré, mais il m'a rendu la main aussitot en me disant houlala, c'est pas beau à voir votre truc, je préfèrerai que vous teniez vous même la tronçonneuse (traduction libre) NC in Guide du linuxien pervers : Bien configurer sa tronçonneuse.
report install debian on powerbook G4
Hello, as promise just a few words explainig how I install debian 2.2r2 on a powerbook G4 this is a short resume on how to install Debian and MacOs on a Titanium powerbook G4 first note that the kernel 2.2.18pre21 on the debian install CD, dosn't allow to boot the Ti 1) boot on the MacOS CD, use the Apple Hard disk tools to create the partition scheme you want on the drive drive eg: X Go for linux (free-space) X Go for the MacOS system (HFS+) X Go for the MacOS apps (HFS+) X Go for the docs (HFS+) X Mo/Go for a sharing MacOS - Linux partition (HFS) 2) install MacOS 3) grab a linux kernel 2.2.18, ramdisk, yaboot, yaboot.conf on the shared partition 4) get the SystemDisk tool from apple URL:ftp://ftp.apple.com/developer/macosxserver/utilities/ with this one note the number of the partition or the shared partition eg: XX 5) edit the yaboot.conf eg: init-message = \nDebian PPC\nhit TAB for boot options\n\n timeout = 50 default = install image=hd:XX,vmlinux-2.2.18 label=install initrd=hd:XX,ramdisk.image.gz initrd-size=8192 append=video=ofonly 6) reboot the Mac under OF (command-option-o-f) at boot-prompt type boot hd:XX,yaboot 7) the debian installer is launched install debian as usual on the free-space partition previously created DON'T forget to create a Apple_Bootstrap partition of small size, in first place see URL:http://www.alaska.net/~erbenson/ mac-fdisk section note the /dev/hdaNN number of the Apple_Bootstrap partition note the /dev/hdaYY number of your / partition eg if you do the way described here, it should be /dev/hda11 (/dev/hda1 to 9 are Mac drivers and /dev/hda10 your bootstrap partition) initialise swap format the linux partitions mount a previously initialized partition, the shared one. install base configure drivers configure base DON'T do disk bootable instead go to the console, copy the linux-kernel-2.2.18 to your /boot partition, name it vmlinux-2.2.18 8) reboot the computer under MacOS depending on the number of linux partition you've created, the previous XX number of the shared partition has changed, use SystemDisk again to get the new one, eg now it's ZZ 9) edit once again the yaboot.conf: modify the old XX to ZZ and insert a linux boot section as following init-message = \nDebian PPC\nhit TAB for boot options\n\n timeout = 50 default = debian image=hd:ZZ,vmlinux-2.2.18 label=install initrd=hd:ZZ,ramdisk.image.gz initrd-size=8192 append=video=ofonly image=hd:YY,/boot/vmlinux-2.2.18 label=debian root=/dev/hdaYY append=video=ofonly 10) reboot under OF once again, at boot prompt boot hd:ZZ, yaboot 11) this time the installed linux boot up - answer the question - set up /etc/apt/sources.list - install what you want, I strongly suggest man first ;-)) - set up the /etc/yaboot.conf eg: # bootstrap partition boot=/dev/hdaNN device=hd: delay=20 timeout=20 # the OF menu to use magicboot=/usr/lib/yaboot/ofboot # the booter to use install=/usr/lib/yaboot/yaboot # enable boot form cdrom enablecdboot # default OS, linux of course defaultos=linux # linux boot options. default=debian image=hd:YY,/boot/vmlinux-2.2.18 label=debian root=/dev/hdaYY append=video=ofonly 12) run mkofboot on /dev/hdaNN --filesystem hfs that's all folks, dual boot Linux/MacOS is set you just have to install what you want: X, compile a fitted kernel for this machine, and so on ;-)) just a note, as I've read on list, eth drivers for the eth card of the TiG4 are not so good. Eric -- l [e2fsck] a bien démarré, mais il m'a rendu la main aussitot en me disant houlala, c'est pas beau à voir votre truc, je préfèrerai que vous teniez vous même la tronçonneuse (traduction libre) NC in Guide du linuxien pervers : Bien configurer sa tronçonneuse.