Re: Re: new Etch install fails to boot
Thank you for your help.
Re: Etch/GDM3/Mate/console: 2 sessions graphiques, est ce normal?
Salut Merci pour vos reponses :D J'ai craint pendant un moment que ce soit probleme de configuration. Je suppose qu'il doit y avoir des raisons techniques a ce choix fait par les developpeurs Debian. Je n'approfondirai pas plus faute de temps et de competences ;-) Cordialement Hugues Le 4 décembre 2017 à 11:53, Jean Bernon <jber...@free.fr> a écrit : > > - Mail original - > > > De: "Hugues MORIN" <mor...@gmail.com> > > À: "Liste Debian" <debian-user-french@lists.debian.org> > > Envoyé: Lundi 4 Décembre 2017 10:21:36 > > Objet: Etch/GDM3/Mate/console: 2 sessions graphiques, est ce normal? > > ... > > > Ca me parait etrange et que je n'ai jamais configure cela > > "volontairement". De plus je ne vois pas trop a quoi cela peut > > servir > > > Je suis sous Etch + Mate 1.16.2 > > > Est ce normal d'avoir GDM3 sur la console n°1? > > Oui c'est normal. Ce n'est pas propre à Mate. Sous Gnome aussi, depuis je > ne sais quelle version, il n'y a plus une seule session graphique en F7, > mais une session GDM en F1 et une session Gnome en F2. > >
Re: Etch/GDM3/Mate/console: 2 sessions graphiques, est ce normal?
- Mail original - > De: "Hugues MORIN" <mor...@gmail.com> > À: "Liste Debian" <debian-user-french@lists.debian.org> > Envoyé: Lundi 4 Décembre 2017 10:21:36 > Objet: Etch/GDM3/Mate/console: 2 sessions graphiques, est ce normal? ... > Ca me parait etrange et que je n'ai jamais configure cela > "volontairement". De plus je ne vois pas trop a quoi cela peut > servir > Je suis sous Etch + Mate 1.16.2 > Est ce normal d'avoir GDM3 sur la console n°1? Oui c'est normal. Ce n'est pas propre à Mate. Sous Gnome aussi, depuis je ne sais quelle version, il n'y a plus une seule session graphique en F7, mais une session GDM en F1 et une session Gnome en F2.
Re: Etch/GDM3/Mate/console: 2 sessions graphiques, est ce normal?
Le 04/12/2017 à 10:21, Hugues MORIN a écrit : > Salut > > > Suite a un bug dans un programme je viens de m'apercevoir que j'avais 2 > sessions graphique qui tourne sur ma machine. > > Je vais essayer de m'expliquer, suite a ce bug pour arreter le programme > en defaut, j'ai eu besoin de passer en console avec Ctrl+Alt+F3. > Jusque la pas de probleme, j'ai pu arreter mon programme. > Mais apres cette operation j'ai voulu verifier les diverses consoles, > juste comme ca > Donc j'ai fait Ctrl+Alt+F4 puis Ctrl+Alt+F5 et Ctrl+Alt+F6, ou j'ai bien > mon prompt en mode texte. > Ctrl+Alt+F2 me ramene sur la session sur laquelle je travaillais. > > Mais surprise quand j'ai fais Ctrl+Alt+F1, je me retrouve sur un ecran > de connexion GDM3 !!! > > Ca me parait etrange et que je n'ai jamais configure cela > "volontairement". De plus je ne vois pas trop a quoi cela peut servir > > Je suis sous Etch + Mate 1.16.2 > > Est ce normal d'avoir GDM3 sur la console n°1? > widevine Oui, MATE ne gère pas le changement d'utilisateur avec GDM. https://github.com/mate-desktop/mate-session-manager/issues/97 -- == | FRÉDÉRIC MASSOT | | http://www.juliana-multimedia.com | | mailto:frede...@juliana-multimedia.com | | +33.(0)2.97.54.77.94 +33.(0)6.67.19.95.69 | ===Debian=GNU/Linux===
Etch/GDM3/Mate/console: 2 sessions graphiques, est ce normal?
Salut Suite a un bug dans un programme je viens de m'apercevoir que j'avais 2 sessions graphique qui tourne sur ma machine. Je vais essayer de m'expliquer, suite a ce bug pour arreter le programme en defaut, j'ai eu besoin de passer en console avec Ctrl+Alt+F3. Jusque la pas de probleme, j'ai pu arreter mon programme. Mais apres cette operation j'ai voulu verifier les diverses consoles, juste comme ca Donc j'ai fait Ctrl+Alt+F4 puis Ctrl+Alt+F5 et Ctrl+Alt+F6, ou j'ai bien mon prompt en mode texte. Ctrl+Alt+F2 me ramene sur la session sur laquelle je travaillais. Mais surprise quand j'ai fais Ctrl+Alt+F1, je me retrouve sur un ecran de connexion GDM3 !!! Ca me parait etrange et que je n'ai jamais configure cela "volontairement". De plus je ne vois pas trop a quoi cela peut servir Je suis sous Etch + Mate 1.16.2 Est ce normal d'avoir GDM3 sur la console n°1? Cordialement Hugues
running etch on AMD Duron 1200 chip
Dear Folks. I am running Debian etch on an old AMD Duron 1200 box. It's so long since I used it I can't remember if it must be running the 32 bit version of Debian ie 64 bit version cannot run on it? uname -m says i686 which makes me think it is 64 bit. Is that correct? Comments appreciated Regards Michael Fothergill
Re: running etch on AMD Duron 1200 chip
On 01/06/2016 08:34 PM, Michael Fothergill wrote: > Dear Folks. > > I am running Debian etch on an old AMD Duron 1200 box. > > It's so long since I used it I can't remember if it must be running the > 32 bit version of Debian ie 64 bit version cannot run on it? > > uname -m says i686 which makes me think it is 64 bit. > No, Duron is 32 bit. Kind regards Georgi
Re: running etch on AMD Duron 1200 chip
On Wed, Jan 6, 2016 at 1:34 PM, Michael Fothergill <michael.fotherg...@googlemail.com> wrote: > Dear Folks. > > I am running Debian etch on an old AMD Duron 1200 box. > > It's so long since I used it I can't remember if it must be running the 32 > bit version of Debian ie 64 bit version cannot run on it? > > uname -m says i686 which makes me think it is 64 bit. > > Is that correct? I Googled that CPU and found this: http://www.cpu-world.com/CPUs/K7/AMD-Duron%201200%20-%20DHD1200AMT1B.html The data width states the CPU is 32 bit. -- Pete Orrall p...@cs1x.com www.peteorrall.com "If there isn't a way, I'll make one."
Re: running etch on AMD Duron 1200 chip
Duron is 32 bit, as is i686. -- John Hasler jhas...@newsguy.com Elmwood, WI USA
Re: running etch on AMD Duron 1200 chip
On 06/01/2016 18:34, Michael Fothergill wrote: Dear Folks. I am running Debian etch on an old AMD Duron 1200 box. It's so long since I used it I can't remember if it must be running the 32 bit version of Debian ie 64 bit version cannot run on it? uname -m says i686 which makes me think it is 64 bit. unlikely, I think Duron's were pre 64 bit chips, but I could be wrong and someone will correct me if that is the case. Is that correct? Comments appreciated Regards Michael Fothergill
Re: running etch on AMD Duron 1200 chip
On 6 January 2016 at 18:47, Martin Smith <li...@rakupottery.org.uk> wrote: > On 06/01/2016 18:34, Michael Fothergill wrote: > >> Dear Folks. >> >> I am running Debian etch on an old AMD Duron 1200 box. >> >> It's so long since I used it I can't remember if it must be running the >> 32 bit version of Debian ie 64 bit version cannot run on it? >> >> uname -m says i686 which makes me think it is 64 bit. >> > unlikely, I think Duron's were pre 64 bit chips, but I could be wrong and > someone will correct me if that is the case. > > Many thanks for the help here. This means that if I want to upgrade to >> Lenny I need to find a repository that is of the x86 32 bit variety. >> > Cheers MF
Re: running etch on AMD Duron 1200 chip
Michael Fothergill composed on 2016-01-06 18:34 (UTC): > I am running Debian etch on an old AMD Duron 1200 box. > It's so long since I used it I can't remember if it must be running the 32 > bit version of Debian ie 64 bit version cannot run on it? > uname -m says i686 which makes me think it is 64 bit. > Is that correct? i686 is 32 bit. http://en.wikipedia.org/wiki/P6_(microarchitecture) > ​Comments appreciated Duron is to Athlon as Celeron is to Pentium 3, that is reduced cache, and for some models, lower bus speed, for lower price point, besides 32 bit. https://en.wikipedia.org/wiki/Duron Because a Duron is a Socket A design, you could replace it with an Athlon or early model Sempron at MHz double or more what you have now, likely for next to free if not entirely free but for shipping and the time it takes to locate and replace. But, Socket A does not support 64 bit chips. -- "The wise are known for their understanding, and pleasant words are persuasive." Proverbs 16:21 (New Living Translation) Team OS/2 ** Reg. Linux User #211409 ** a11y rocks! Felix Miata *** http://fm.no-ip.com/
howto import gpg key (was ... Re: debootstrap etch unknown key)
On Wed, Feb 19, 2014 at 10:38:47AM -0500, Dan Purgert wrote: Tried gpg --keyserver pgp.mit.edu --recv-keys B5D0C804ADB11277 and it pulled down the Etch Stable Release Key debian-rele...@lists.debian.org key. $ gpg --fingerprint ADB11277 pub 1024D/ADB11277 2006-09-17 Key fingerprint = 7EA3 91D7 2477 203B 58C0 4FBC B5D0 C804 ADB1 1277 uid Etch Stable Release Key debian-rele...@lists.debian.org Thanks for that. I keep forgetting the option/values. -- If you're not careful, the newspapers will have you hating the people who are being oppressed, and loving the people who are doing the oppressing. --- Malcolm X -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20140221003932.GD12466@tal
Re: debootstrap etch unknown key
On Tue, Feb 18, 2014 at 08:19:13PM +, Mike Fitzgerald wrote: Hi I've got a Cobalt Raq4 and am trying install etch (that's the most recent version it will take) but when issuing: root@debian:/# debootstrap --arch i386 etch /nfsroot-x86 [1]http://archive.debian.org/debian/ I get the following error messages: I: Retrieving Release I: Retrieving Release.gpg I: Checking Release signature E: Release signed by unknown key (key id B5D0C804ADB11277) Any ideas what is wrong? This is my first foray into this territory Etch, as you know, is old. The key used to sign it is now, in all likelihood, expired. It's probably been expired so long, that it's been cleared out of the debian-keyring package. You should probably try and find a source that you trust that tells you what they key for Etch was and then fetch that manually (it may still be on keyservers etc). signature.asc Description: Digital signature
Re: debootstrap etch unknown key
On 19/02/2014 09:56, Darac Marjal wrote: You should probably try and find a source that you trust that tells you what they key for Etch was and then fetch that manually (it may still be on keyservers etc). I still have a box in the corner running Etch. I had a quick look for what it thinks is the Debian signing key, but I couldn't find it. I'd installed from CDs I'd downloaded from the Debian download site, probably sometime during 2007/2008. If you could suggest where I might check, I could tell the OP what this installation believes the key ID to be. Then we could check the keyservers, and we'd both be able to see if this key is there (something I would be interested to know, also). I still have the discs I downloaded. regards, Ron -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/5304bc90.9010...@tesco.net
Re: debootstrap etch unknown key
On 19/02/2014 09:15, Ron Leach wrote: On 19/02/2014 09:56, Darac Marjal wrote: You should probably try and find a source that you trust that tells you what they key for Etch was and then fetch that manually (it may still be on keyservers etc). I still have a box in the corner running Etch. I had a quick look for what it thinks is the Debian signing key, but I couldn't find it. I'd installed from CDs I'd downloaded from the Debian download site, probably sometime during 2007/2008. If you could suggest where I might check, I could tell the OP what this installation believes the key ID to be. Then we could check the keyservers, and we'd both be able to see if this key is there (something I would be interested to know, also). I still have the discs I downloaded. regards, Ron Tried gpg --keyserver pgp.mit.edu --recv-keys B5D0C804ADB11277 and it pulled down the Etch Stable Release Key debian-rele...@lists.debian.org key. $ gpg --fingerprint ADB11277 pub 1024D/ADB11277 2006-09-17 Key fingerprint = 7EA3 91D7 2477 203B 58C0 4FBC B5D0 C804 ADB1 1277 uid Etch Stable Release Key debian-rele...@lists.debian.org Should be what you're looking for. -Dan -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/5304d007.8060...@djph.net
debootstrap etch unknown key
Hi I've got a Cobalt Raq4 and am trying install etch (that's the most recent version it will take) but when issuing: root@debian:/# debootstrap --arch i386 etch /nfsroot-x86 http://archive.debian.org/debian/ I get the following error messages: I: Retrieving Release I: Retrieving Release.gpg I: Checking Release signature E: Release signed by unknown key (key id B5D0C804ADB11277) Any ideas what is wrong? This is my first foray into this territory Thanks Mike Fitzgerald
Re: [POSSIBLE SPAM] Re: use a 3TB WD Mybook on old etch system kernel 2.6.18-6-486. parted 1.7.1 has bugs. can I use modern parted on other system and move over drive
ok so I will try it tomorrow. Thank you very much I will report back Mitchell And the answer is: The drive was not recognized as partitioned and formated as two ext3 partitions of size 1.5T. even after I partitioned it on a modern sid system. The old debian kernel 2.6-18-2 recognized the gpt identity, but would not mount the drive. Oh well, I will have to take the machine down and update before backup. Thanks -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20130322215938.ga6...@earthlink.net
Re: [POSSIBLE SPAM] Re: use a 3TB WD Mybook on old etch system kernel 2.6.18-6-486. parted 1.7.1 has bugs. can I use modern parted on other system and move over drive
On 23:32 Fri 15 Mar , Amit Uttamchandani wrote: Should work... Looking at the code for 2.6.18.6 it does have support for EFI partition scheme (GPT). To confirm if your kernel has support for it search EFI_PARTITION in /proc/config.gz or /boot/config to see if EFI partition is defined. cat /boot/config-2.6.18-6-486 |grep EFI CONFIG_EFI_VARS=m CONFIG_EFI=y CONFIG_EFI_PARTITION=y A1:~# q ok so I will try it tomorrow. Thank you very much I will report back Mitchell -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20130317033211.ga8...@earthlink.net
use a 3TB WD Mybook on old etch system kernel 2.6.18-6-486. parted 1.7.1 has bugs. can I use modern parted on other system and move over drive
Hi, I need to back up a lot of data from old etch system running kernel 2.6.18-6#1 System is remote from where I am. I had them connect a 3Terabyte mybook from wd. unfortunately I am running into the fdisk doesnt work with 3T drives problem, so i installed parted, and old parted on this legacy system (etch) which is 1.7.1 failed to create the partitions and confessed to me * You found a bug in GNU Parted! Here's what you have to do: Don't panic! The bug has most likely not affected any of your data. Help us to fix this bug by doing the following: Check whether the bug has already been fixed by checking the last version of GNU Parted that you can find at: http://ftp.gnu.org/gnu/parted/ Please check this version prior to bug reporting. If this has not been fixed yet or if you don't know how to check, please visit the GNU Parted website: http://www.gnu.org/software/parted for further information. Your report should contain the version of this release (1.7.1) along with the error message below, the output of parted DEVICE unit co print unit s print and additional information about your setup you consider important. Error: A general SIGSEGV signal was encountered.Aborted *** So I had the remote people take the drive to a more modern sid machine and using parted version 2.3 I was able to create a gpt partition table and partition into two 1.5TB partitions with ext3. So my question is, will the two partitions be mountable and usable on the original ext3 system? I am hoping the answer is yes. It will take a few long drives back and forth to find out :) Thanks Mitchell -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20130315211109.ga26...@earthlink.net
Re: use a 3TB WD Mybook on old etch system kernel 2.6.18-6-486. parted 1.7.1 has bugs. can I use modern parted on other system and move over drive
Should work... Looking at the code for 2.6.18.6 it does have support for EFI partition scheme (GPT). To confirm if your kernel has support for it search EFI_PARTITION in /proc/config.gz or /boot/config to see if EFI partition is defined. -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/loom.20130316t003050-...@post.gmane.org
Re: Debian Etch(Kernel 2.6.24) Can't insatll on Ivy bridge platform
On 10/17/2012 8:18 AM, richie.jf@foxconn.com wrote: First off, I own a couple of your socket AM3 M61PMP-K motherboards. The CPU temp doesn't report correctly, which is not critical. Besides that they work great and I'm pleased with them. When we install Debian Etch(Kernel 2.6.24) on Intel Ivy Bridge platform, it pop out warning message: no mount CD-ROM can be found. If we install this OS with Sandy Bridge platform, it works fine. but now, we need update to Ivy Bridge platform. we are facing this problem now. Any suggestions? Or anybody knows if kernel 2.6.24 support Intel Ivy Bridge platform? Thanks in advance and any suggestions will be highly appreciated! Etch was EOL many years ago. Lenny came next and it is EOL also. Squeeze is current, and Wheezy will be released within 6 months or so. Try the Squeeze and Wheezy installers. 2.6.24 is way too old for Ivy Bridge. A little Googling will tell you that various fixes for Ivy Bridge were still being submitted in Linux 3.5, around June/July 2012 IIRC. Apparently there are significant differences between Sandy and Ivy Bridge. I'm not an Intel hardware engineer so I can't say for sure. Given that Foxconn is an Intel licensee I would think you could contact Intel engineers directly and ask this question. What I can say for sure is that you shouldn't be working with EOL operating systems and kernels on the newest chipset platforms. That's always a recipe for problems. -- Stan -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/508038b2.3050...@hardwarefreak.com
Debian Etch(Kernel 2.6.24) Can't insatll on Ivy bridge platform
Dear, When we install Debian Etch(Kernel 2.6.24) on Intel Ivy Bridge platform, it pop out warning message: no mount CD-ROM can be found. If we install this OS with Sandy Bridge platform, it works fine. but now, we need update to Ivy Bridge platform. we are facing this problem now. Any suggestions? Or anybody knows if kernel 2.6.24 support Intel Ivy Bridge platform? Thanks in advance and any suggestions will be highly appreciated! If there is attached Zip files in the email, the password is 123456. Thanks for your kindly support,any concern,please contact me. Best Regards ! Richie Liu刘江凡 AE/RD/ABD/PCEBG FOXCONN TECHNOLOGY GROUP Tel:+86(755) 27708000 ext 88958 Mobile:137-6030-1861 Mail:richie.jf@mail.foxconn.com 本��子�]件及附件所�d信息均�楸C苄畔�,受合同保�o或依法不得��漏。其�热��H供 指定收件人按限定或特殊目的使用。未��授�嗾呤盏酱诵畔⒕��o�嚅��x、 使用、 �}�u、��漏或散�选H裟�因�檎`�鞫�收到本�]件或者非本�]件之指定收件人,��即刻 回覆�]件或致��Super Notes�]件客服�峋� 560-104,�K永久�h除此�]件及其附件和�N ��所有�}印件。�x�x您的合作! This e-mail message together with any attachments thereto (if any) is confidential, protected under an enforceable non-disclosure agreement, intended only for the use of the named recipient(s) above and may contain information that is privileged, belonging to professional work products or exempt from disclosure under applicable laws.Any unauthorized review, use, copying, disclosure, or distribution of any information contained in or attached to this transmission is STRICTLY PROHIBITED and may be against the laws. If you have received this message in error, or are not the named recipient(s), please immediately notify the sender by e-mail or telephone at Super Notes support hotline 560-104 and delete this e-mail message and any attached documentation from your computer. Receipt by anyone other than the intended recipient(s) is not a waiver of any attorney-client or work product privilege. Thank you! mail from ip--10.141.106.42 mail from pc--APDME099 Version: Super Notes 1.4.1.2B
Re: pasar directamente de etch a squeeze
Juan Manuel Acuña wrote: [...] Cuando salió squeeze me quise ahorrar un rato y pasar directo una máquina de etch a squeeze ...y fue muy muy mala idea, la máquina simplemente se hizo un lio con las configuraciones y no arrancaba bien, todo un problema :( La máquina no era crucial y tenía todo respaldado pero al final le tuve que poner mucho más tiempo para volverla a dejar andando que si hubiera pasado de etch a lenny y de lenny a squeeze. En mi humilde opinión, sin acceso físico a la máquina es muy pero que muy arriesgado. Tal vez me perdí ese correo, pero ¿hay alguna razón en especial para que no quieras/puedas hacer el paso etch - lenny - squeeze ? Saludos! Queria ganar tiempo, pero leyendo lo que escribes parece que el riesgo es perder mucho mas tiempo que el tiempo de pasar de Etch a Lenny y de Lenny a Squeeze. Lo que no sé es si se puede hacer una actualización desde un depósito de archivos como el actual de lenny : deb http://archive.debian.org/debian-archive/debian/ lenny main contrib non-free Si se puede, lo hare en dos etapas. gracias por tu respuesta. -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/k3rsbt$aq6$1...@ger.gmane.org
Re: pasar directamente de etch a squeeze
Camaleón wrote: El Mon, 24 Sep 2012 15:43:21 +0200, Alarc'h escribió: Camaleón wrote: (...) Y Lenny ya no tiene actualizaciones aunque sea oldstable. Por cierto, Wheezy saldrá en unos meses. Por eso es porque quiero actualizar ahora. No quiero tener que actualizar mas tarde para tener Etch Lenny Squeeze Wheezy Me parece ya bastante peligroso. (...) Sí, cierto, a mayor salto mayor será la caída :-) Ahora en serio, lo que yo hago es hacer instalaciones desde cero (limpias) en paralelo para tener siempre un sistema disponible. Es decir, ahora mismo tengo Lenny y cuando salga Wheezy la instalaré en una partición separada para que en el caso de que haya problemas siempre pueda usar el sistema anterior. Lo que se pierde en tiempo (en ir configurando el nuevo sistema) y en espacio de disco duro (aunque con los tamaños actuales eso ya no es ningún problema) se gana en tranquilidad y fiabilidad :-) Saludos, Esto me parece una buena idea. Y me estoy preguntando si no seria mejor hacer una instalción limpia, aprovechando para utilizar LVM que no existe en este servidor, y despues tener mucho mas facilidades par hacer nueva partición, instalaciones paralelas etc. -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/k3rskl$aq6$2...@ger.gmane.org
Re: pasar directamente de etch a squeeze
El mar, 25-09-2012 a las 11:09 +0200, Alarc'h escribió: Juan Manuel Acuña wrote: [...] Cuando salió squeeze me quise ahorrar un rato y pasar directo una máquina de etch a squeeze ...y fue muy muy mala idea, la máquina simplemente se hizo un lio con las configuraciones y no arrancaba bien, todo un problema :( La máquina no era crucial y tenía todo respaldado pero al final le tuve que poner mucho más tiempo para volverla a dejar andando que si hubiera pasado de etch a lenny y de lenny a squeeze. En mi humilde opinión, sin acceso físico a la máquina es muy pero que muy arriesgado. Tal vez me perdí ese correo, pero ¿hay alguna razón en especial para que no quieras/puedas hacer el paso etch - lenny - squeeze ? Saludos! Queria ganar tiempo, pero leyendo lo que escribes parece que el riesgo es perder mucho mas tiempo que el tiempo de pasar de Etch a Lenny y de Lenny a Squeeze. Lo que no sé es si se puede hacer una actualización desde un depósito de archivos como el actual de lenny : deb http://archive.debian.org/debian-archive/debian/ lenny main contrib non-free Si se puede, lo hare en dos etapas. gracias por tu respuesta. Buenos días, NO lo hagas si no deseas encontrar problemas y extender tus horas laborales, Las mejores opciones ya las conoces. saludos, liuber's hdez. -- Este mensaje le ha llegado mediante el servicio de correo electronico que ofrece Infomed para respaldar el cumplimiento de las misiones del Sistema Nacional de Salud. La persona que envia este correo asume el compromiso de usar el servicio a tales fines y cumplir con las regulaciones establecidas Infomed: http://www.sld.cu/ -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/1348552826.1665.9.ca...@infobiblio.fts.local
pasar directamente de etch a squeeze
Hola, Heredo de un servidor que aun esta bajo Debian Etch... su uptime es el siguiente : 13:18:18 up 1342 days, 22:21, 1 user, load average: 0.00, 0.00, 0.00 ¡ Pues podemos decir que Etch funcionaba bien ! Pero claro no hay más actualizaciones etc. ya que Lenny, que siguió a Etch, es el oldstable. Pues quería saber si es posible hacer directamente la actualización de Etch hasta Squeeze sin pasar por la etapa a Lenny (lo que vuelve a saber si se puede actualizar a Debian saltando 1 o x versiones). Preciso que la computadora esta en un data center, que no puedo acceder a esta computadora físicamente y que todo deberá utilizar la línea de commandos vía una conexión ssh a través de Internet. ¿ Sabe alguien si modificar el fichero /etc/apt/sources.list reemplazando etch por squeeze es suficiente para lanzar dist-upgrade ? Gracias si alguien me puede ayudar. -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/k3hf44$hu8$1...@ger.gmane.org
Re: pasar directamente de etch a squeeze
El día 21 de septiembre de 2012 12:21, Alarc'h ala...@alarch.ath.cx escribió: Hola, Heredo de un servidor que aun esta bajo Debian Etch... su uptime es el siguiente : 13:18:18 up 1342 days, 22:21, 1 user, load average: 0.00, 0.00, 0.00 ¡ Pues podemos decir que Etch funcionaba bien ! Pero claro no hay más actualizaciones etc. ya que Lenny, que siguió a Etch, es el oldstable. Pues quería saber si es posible hacer directamente la actualización de Etch hasta Squeeze sin pasar por la etapa a Lenny (lo que vuelve a saber si se puede actualizar a Debian saltando 1 o x versiones). Preciso que la computadora esta en un data center, que no puedo acceder a esta computadora físicamente y que todo deberá utilizar la línea de commandos vía una conexión ssh a través de Internet. ¿ Sabe alguien si modificar el fichero /etc/apt/sources.list reemplazando etch por squeeze es suficiente para lanzar dist-upgrade ? Gracias si alguien me puede ayudar. -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/k3hf44$hu8$1...@ger.gmane.org Triple mortal para atras sin red. Siendo un pc al que no puedes acceder físicamente yo no me arriesgaba tanto. La verdad es que no se por donde puede salir una actualización como la que comentas. -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/ca+fbnvg8ei9f1vgera1+pg81bnpa0jabbouhtnzeqostq2k...@mail.gmail.com
Re: pasar directamente de etch a squeeze
Esteban Torres Rodríguez wrote: [...] Triple mortal para atras sin red. Siendo un pc al que no puedes acceder físicamente yo no me arriesgaba tanto. La verdad es que no se por donde puede salir una actualización como la que comentas. ¡ Y yo tampoco hombre se donde eso puede salir ! Eso es mi problema. Tal vez alguien a intentado eso y puede tener una experiencia, aun sea negativa. Lo que mas me atreve es el problema de udev que al actualizar puede cambiar el nombre de la interfaces. He visto una vez en uno de mis PC en dmesg : udev: renamed network interface eth0 to eth1 lo que corresponde à este fichero : /etc/udev/rules.d/70-persistent-net.rules que contenia : # PCI device 0x8086:0x100f (e1000) SUBSYSTEM==net, DRIVERS==?*, ATTRS{address}==00:0c:29:65:ae:04, NAME=eth0 # PCI device 0x1039:0x0900 (sis900) SUBSYSTEM==net, ACTION==add, DRIVERS==?*, ATTR{address}==00:1c:c0:65:20:06, ATTR{type}==1, KERNEL==eth*, NAME=eth1 y claro el servidor no respondia a los pings porque se habian intervertido eth0 y eth1.. Tuve que editar este fichero para intercambiar el nombre de los devices. Pero podia acceder fisicamente al PC. Sino, solo con ssh, era impossible. Alguien sabe si se puede prevenir eso ? -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/k3pgfo$t9e$1...@ger.gmane.org
Re: pasar directamente de etch a squeeze
El Fri, 21 Sep 2012 12:21:56 +0200, Alarc'h escribió: Heredo de un servidor que aun esta bajo Debian Etch... su uptime es el siguiente : 13:18:18 up 1342 days, 22:21, 1 user, load average: 0.00, 0.00, 0.00 Olé por ese uptime. Supongo que al no haber actualizaciones de paquetes no habrá tenido que reiniciar tras una actualización del kernel :-P ¡ Pues podemos decir que Etch funcionaba bien ! Pero claro no hay más actualizaciones etc. ya que Lenny, que siguió a Etch, es el oldstable. Y Lenny ya no tiene actualizaciones aunque sea oldstable. Por cierto, Wheezy saldrá en unos meses. Pues quería saber si es posible hacer directamente la actualización de Etch hasta Squeeze sin pasar por la etapa a Lenny (lo que vuelve a saber si se puede actualizar a Debian saltando 1 o x versiones). Es posible pero no es un proceso oficialmente soportado ni documentado, es decir, que la actualización corre completamente a cargo del administrador. Preciso que la computadora esta en un data center, que no puedo acceder a esta computadora físicamente y que todo deberá utilizar la línea de commandos vía una conexión ssh a través de Internet. Mal asunto... deberías tener un Plan B en el caso de que el sistema no arranque. ¿ Sabe alguien si modificar el fichero /etc/apt/sources.list reemplazando etch por squeeze es suficiente para lanzar dist-upgrade ? Antes de eso, conviene consultar las notas de la versión, concretamente el capítulo 4 (sí, de ambas versiones): http://www.debian.org/releases/lenny/i386/release-notes/index.en.html http://www.debian.org/releases/stable/i386/release-notes/index.en.html Saludos, -- Camaleón -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/k3pmgl$e50$1...@ger.gmane.org
Re: pasar directamente de etch a squeeze
Camaleón wrote: El Fri, 21 Sep 2012 12:21:56 +0200, Alarc'h escribió: Heredo de un servidor que aun esta bajo Debian Etch... su uptime es el siguiente : 13:18:18 up 1342 days, 22:21, 1 user, load average: 0.00, 0.00, 0.00 Olé por ese uptime. Supongo que al no haber actualizaciones de paquetes no habrá tenido que reiniciar tras una actualización del kernel :-P Exacto, el kernel no fue actualizado. Era otro administrador que atendia a este servidor. Pero en un servidor el material no cambia y no se necesita nuevos pilotos etc. y fuera de alertas de seguridad muy fuertes no es necesarion cambiar el kernel. ¡ Pues podemos decir que Etch funcionaba bien ! Pero claro no hay más actualizaciones etc. ya que Lenny, que siguió a Etch, es el oldstable. Y Lenny ya no tiene actualizaciones aunque sea oldstable. Por cierto, Wheezy saldrá en unos meses. Por eso es porque quiero actualizar ahora. No quiero tener que actualizar mas tarde para tener Etch Lenny Squeeze Wheezy Me parece ya bastante peligroso. Pues quería saber si es posible hacer directamente la actualización de Etch hasta Squeeze sin pasar por la etapa a Lenny (lo que vuelve a saber si se puede actualizar a Debian saltando 1 o x versiones). Es posible pero no es un proceso oficialmente soportado ni documentado, es decir, que la actualización corre completamente a cargo del administrador. Parece que si... Preciso que la computadora esta en un data center, que no puedo acceder a esta computadora físicamente y que todo deberá utilizar la línea de commandos vía una conexión ssh a través de Internet. Mal asunto... deberías tener un Plan B en el caso de que el sistema no arranque. En este caso el plan B sera contactar el data center y pagar una entervención manual... Y me gustaria evitar estos gastos. ¿ Sabe alguien si modificar el fichero /etc/apt/sources.list reemplazando etch por squeeze es suficiente para lanzar dist-upgrade ? Antes de eso, conviene consultar las notas de la versión, concretamente el capítulo 4 (sí, de ambas versiones): http://www.debian.org/releases/lenny/i386/release-notes/index.en.html http://www.debian.org/releases/stable/i386/release-notes/index.en.html Saludos, Voy a leer de nuevo, ya he leido, pero hasta hoy no tuvé el coraje de hecharme en el proceso :-) Gracias por tu respuesta. -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/k3po1o$144$1...@ger.gmane.org
Re: pasar directamente de etch a squeeze
On Viernes, 21 de septiembre de 2012 12:21:56 Alarc'h escribió: Hola, Heredo de un servidor que aun esta bajo Debian Etch... su uptime es el siguiente : 13:18:18 up 1342 days, 22:21, 1 user, load average: 0.00, 0.00, 0.00 esto es una debian menudo uptime Pues quería saber si es posible hacer directamente la actualización de Etch hasta Squeeze sin pasar por la etapa a Lenny (lo que vuelve a saber si se puede actualizar a Debian saltando 1 o x versiones). Por poder se puede Preciso que la computadora esta en un data center, que no puedo acceder a esta computadora físicamente y que todo deberá utilizar la línea de commandos vía una conexión ssh a través de Internet. No te dan un acceso KVM??? aunque solo sea para la migración. Desde ahí controlas la maquina desde que arranca. ¿ Sabe alguien si modificar el fichero /etc/apt/sources.list reemplazando etch por squeeze es suficiente para lanzar dist-upgrade ? Si pero te falta un paso apt-get update despues de cambiar versión. De todas maneras que sepas que puedes liarla, sin acceso físico. Hombre si tienes backups...lo mas que te puede pasar es que te tengan que instalar una squeeze y te cobraran. Mas curro de configuraciones, etc, etc. Si tienes mucho soft y tienes que reinstalar la máquina por que se ha petado en la migración. Mete antes la lista de paquetes en un fichero... algo asi: dpkg --get-selections seleciones_software_maquina_tal despues cuando hayas instalado la maquina pelada dpkg --set-selections seleciones_software_maquina_tal y entonces dselect y ya. Pero esto es muy agorero. La verdad es que yo no he tenido nunca ningun problema. eso si temblando por si pasa algo :=} -- Un saludo / agur bero bat BasaBuru BASATU basatia bihur zaitez ~ -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/201209241851.36022.basab...@basatu.org
Re: pasar directamente de etch a squeeze
BasaBuru wrote: On Viernes, 21 de septiembre de 2012 12:21:56 Alarc'h escribió: Hola, Heredo de un servidor que aun esta bajo Debian Etch... su uptime es el siguiente : 13:18:18 up 1342 days, 22:21, 1 user, load average: 0.00, 0.00, 0.00 esto es una debian menudo uptime Pues quería saber si es posible hacer directamente la actualización de Etch hasta Squeeze sin pasar por la etapa a Lenny (lo que vuelve a saber si se puede actualizar a Debian saltando 1 o x versiones). Por poder se puede Preciso que la computadora esta en un data center, que no puedo acceder a esta computadora físicamente y que todo deberá utilizar la línea de commandos vía una conexión ssh a través de Internet. No te dan un acceso KVM??? aunque solo sea para la migración. Desde ahí controlas la maquina desde que arranca. ¿ Sabe alguien si modificar el fichero /etc/apt/sources.list reemplazando etch por squeeze es suficiente para lanzar dist-upgrade ? Si pero te falta un paso apt-get update despues de cambiar versión. Si claro De todas maneras que sepas que puedes liarla, sin acceso físico. Hombre si tienes backups...lo mas que te puede pasar es que te tengan que instalar una squeeze y te cobraran. Mas curro de configuraciones, etc, etc. Si tal vez se va acabar asi, pero me gustaria lograrlo sin tener que pedir ayuda a la asistencia tecnica. Si tienes mucho soft y tienes que reinstalar la máquina por que se ha petado en la migración. No hay mucho soft, solo Apache y Php, MySQL, Postfix, vsftpd, unos sitios internet en Php, piwik y programas como rsync, ntp, hddtemp que se pueden reinstalar sin problemas y un servidor ssh utilizado con keychain. Para mi lo mas importante es que arranque y que sea posible conectarse con ssh. Despues siempre lograre hacerla funcionar. Mete antes la lista de paquetes en un fichero... algo asi: dpkg --get-selections seleciones_software_maquina_tal despues cuando hayas instalado la maquina pelada dpkg --set-selections seleciones_software_maquina_tal y entonces dselect y ya. Estoy empezando los backups y ya tengo la liste de dpkg como lo dicen en la doc debian. Pero esto es muy agorero. La verdad es que yo no he tenido nunca ningun problema. eso si temblando por si pasa algo :=} exactamente, intentare eso durante la semana. -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/k3q4qa$roc$1...@ger.gmane.org
Re: pasar directamente de etch a squeeze
El Mon, 24 Sep 2012 15:43:21 +0200, Alarc'h escribió: Camaleón wrote: (...) Y Lenny ya no tiene actualizaciones aunque sea oldstable. Por cierto, Wheezy saldrá en unos meses. Por eso es porque quiero actualizar ahora. No quiero tener que actualizar mas tarde para tener Etch Lenny Squeeze Wheezy Me parece ya bastante peligroso. (...) Sí, cierto, a mayor salto mayor será la caída :-) Ahora en serio, lo que yo hago es hacer instalaciones desde cero (limpias) en paralelo para tener siempre un sistema disponible. Es decir, ahora mismo tengo Lenny y cuando salga Wheezy la instalaré en una partición separada para que en el caso de que haya problemas siempre pueda usar el sistema anterior. Lo que se pierde en tiempo (en ir configurando el nuevo sistema) y en espacio de disco duro (aunque con los tamaños actuales eso ya no es ningún problema) se gana en tranquilidad y fiabilidad :-) Saludos, -- Camaleón -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/k3q5ev$e50$1...@ger.gmane.org
Re: pasar directamente de etch a squeeze
El 24/09/12 11:51, BasaBuru escribió: On Viernes, 21 de septiembre de 2012 12:21:56 Alarc'h escribió: Hola, Heredo de un servidor que aun esta bajo Debian Etch... su uptime es el siguiente : 13:18:18 up 1342 days, 22:21, 1 user, load average: 0.00, 0.00, 0.00 esto es una debian menudo uptime Pues quería saber si es posible hacer directamente la actualización de Etch hasta Squeeze sin pasar por la etapa a Lenny (lo que vuelve a saber si se puede actualizar a Debian saltando 1 o x versiones). Por poder se puede Preciso que la computadora esta en un data center, que no puedo acceder a esta computadora físicamente y que todo deberá utilizar la línea de commandos vía una conexión ssh a través de Internet. No te dan un acceso KVM??? aunque solo sea para la migración. Desde ahí controlas la maquina desde que arranca. ¿ Sabe alguien si modificar el fichero /etc/apt/sources.list reemplazando etch por squeeze es suficiente para lanzar dist-upgrade ? Si pero te falta un paso apt-get update despues de cambiar versión. De todas maneras que sepas que puedes liarla, sin acceso físico. Hombre si tienes backups...lo mas que te puede pasar es que te tengan que instalar una squeeze y te cobraran. Mas curro de configuraciones, etc, etc. Si tienes mucho soft y tienes que reinstalar la máquina por que se ha petado en la migración. Mete antes la lista de paquetes en un fichero... algo asi: dpkg --get-selections seleciones_software_maquina_tal despues cuando hayas instalado la maquina pelada dpkg --set-selections seleciones_software_maquina_tal y entonces dselect y ya. Pero esto es muy agorero. La verdad es que yo no he tenido nunca ningun problema. eso si temblando por si pasa algo :=} Cuando salió squeeze me quise ahorrar un rato y pasar directo una máquina de etch a squeeze ...y fue muy muy mala idea, la máquina simplemente se hizo un lio con las configuraciones y no arrancaba bien, todo un problema :( La máquina no era crucial y tenía todo respaldado pero al final le tuve que poner mucho más tiempo para volverla a dejar andando que si hubiera pasado de etch a lenny y de lenny a squeeze. En mi humilde opinión, sin acceso físico a la máquina es muy pero que muy arriesgado. Tal vez me perdí ese correo, pero ¿hay alguna razón en especial para que no quieras/puedas hacer el paso etch - lenny - squeeze ? Saludos! -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/5060e10a.5070...@gmail.com
Error en debian etch kernel panic - not syncing: No init found. Try passing init = option to kernel
Hola muy buenas, al arrancar un debian un pelín antiguo que tenemos un proxy http montado, me ha reportado el siguiente error... Según he leído, puede deberse a que el initrd esté dañado. Alguien ha tenido el mismo error?? Saludos y gracias de antemano. -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/99f246844d11d1bb44bfb7f5fc6a5...@maykel.sytes.net
Re: Re: MySQL 4.0 (sarge) -- MySQL 5.0 (etch) -- Please do REPAIR TABLE
Dera Tech, i m not able to see innodb table on mysql database can you pls help me out Thanks regards Rajeev
Re: Re: MySQL 4.0 (sarge) -- MySQL 5.0 (etch) -- Please do REPAIR TABLE
Hi On Wed, May 09, 2012 at 08:04:11AM +0100, Rajeev tyagi wrote: Dera Tech, i m not able to see innodb table on mysql database can you pls help me out Difficult to help without more details How are you attempting to see the table? (e.g. what SQL statement?) Which error do you get? -- Karl E. Jorgensen IT Operations -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20120509183547.GH8503@hawking
Etch Lenny Squeeze upgrades and sysv-rc
Hi, I don't know if it is because several of my servers started out as Etch then got upgraded to Lenny end then to Squeeze, or if it is something in the Lenny to Squeeze upgrade but During most of my upgrades the sysv-rc upgrade failed at first because of the old libdevmapper1.02 package. The solution was simple as there was already an installed libdevmapper1.02.1 version installed at that time which did not have the problem. So just # aptitude purge libdevmapper1.02 # dpkg-reconfigure sysv-rc and the problem is gone. However, I was unable to find anything about this in the Squeeze upgrade notes. Did I miss something? Or is it because they started out as Etch? I am assuming so but the funny thing is that at the start of the upgrade I did an # apt-get autoremove And that did not remove the old libdevmapper1.02 which had status c at the time of the sysv-rc upgrade. # aptitude search libdevmapper v libdevmapper - p libdevmapper-dev - The Linux Kernel Device Mapper header files c libdevmapper1.02 - The Linux Kernel Device Mapper userspace library i A libdevmapper1.02.1 - The Linux Kernel Device Mapper userspace library Nor did # aptitude purge ~c delete that package when I ran that at the beginning of my upgrade run. So probably the libdevmapper1.02.1 was installed during the upgrade process, which is kinda funny as a default Lenny installation already has the 1.02.1 version. For whoever still needs to upgrade their Lenny system to Squeeze, now you know what it going on. I'm finished as of last week. :-) Bonno Bloksma -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/89d1798a7351d040b4e74e0a043c69d70101c...@hglexch-01.tio.nl
Re: Etch Lenny Squeeze upgrades and sysv-rc
On Lu, 05 mar 12, 12:29:30, Bonno Bloksma wrote: Hi, I don't know if it is because several of my servers started out as Etch then got upgraded to Lenny end then to Squeeze, or if it is something in the Lenny to Squeeze upgrade but ... c libdevmapper1.02 - The Linux Kernel Device Mapper userspace library It looks like that package is pre-lenny (probably from etch), so you missed the step about cleaning your system of obsolete packages before starting the upgrade. For the archives, 'aptitude purge ~o' will purge all packages that are not present in any repositories you have configured. Kind regards, Andrei -- Offtopic discussions among Debian users and developers: http://lists.alioth.debian.org/mailman/listinfo/d-community-offtopic signature.asc Description: Digital signature
Etch den Lenny ye geçiş
Arkadaşlar aranızda debian Etch den Lenny ye upgrade yapan var mı ? şansen ben 2 gündür uğraşıyorum fakat upgrade yaptıktan sonra grub yazıp kalıyor, ne kernel nede menu.list yükleniyor sorunu bir türlü çözemedim, internette araştırdım fakat işime yarayacak bir çözüm bulamadım, problemin çözümünü bilen arkadaşların yardımını rica ediyorum.
Re: Etch den Lenny ye geçiş
Merhaba, Bu cihaz kişisel kullandığınız bir PC mi yoksa sunucu görevi yürüten bir cihaz mı? Eğer kşisel olarak kullandığınız bir PC ise Lenny değil son kararlı sürüm squeeze daha uygun olacaktır. Ayrıca dağıtım yükseltmeler hep sorunlu olduğu için kişisel önerim ev dizininizi çalışan bir CD ile sistemi açıp yedekledikten sonra istediğiniz sürümü sıfırdan kurmanız ve kurulum sırasında ayrı bir bölüm oluşturup ev dizininizi o ayrı bölüme yerleştirmenizdir. Yeni kurduğunuz ev dizininize daha sonra yedeklediğiniz ev dizininizi (sisteme özgü ayar dosyaları hariç - kişisel ayar dosyalarınız dahil [örneğin iceweasel v.b..]) kopyalayarak yeni sisteminizi tamamlamak doğru olur. Veya çalışan CD ile sistemi açıp grubu yeniden yükleyerek sisteminizi kontrol edin. Sorun yoksa devam edersiniz, sorun varsa yukarıdaki yöntem işinizi görür. http://wiki.debian.org/GrubRecover bu linkte işlemin nasıl yapılacağı anlatılıyor. Google size grub recover, grub re-install anahtar sözcükleri ile daha fazla çözüm üretebilir. İyi çalışmalar. 16 12 2011 tarihinde Kazim Karadas karadaska...@yahoo.com yazmış: Arkadaşlar aranızda debian Etch den Lenny ye upgrade yapan var mı ? şansen ben 2 gündür uğraşıyorum fakat upgrade yaptıktan sonra grub yazıp kalıyor, ne kernel nede menu.list yükleniyor sorunu bir türlü çözemedim, internette araştırdım fakat işime yarayacak bir çözüm bulamadım, problemin çözümünü bilen arkadaşların yardımını rica ediyorum. -- Zeki Çatav http://zekicatav.tyih.gov.tr -- To UNSUBSCRIBE, email to debian-user-turkish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/CAP6VsRLTR8G_QhXSCmJF2NuQuu9D+zR=kuehf2i466cnaqr...@mail.gmail.com
Re: domU squeeze dans un xen dom0 etch
Tu es bien en 64 bits sur ton dom0 ? On peux pas faire tourner un domU 64bits sur un dom0 32bits Guy Oui tout est en xen-amd64, dom0 et domU. Mickaël -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/4e97fe8d.4050...@free.fr
Re: domU squeeze dans un xen dom0 etch
Jean-Yves tu m'as mis sur la piste. J'avais déjà essayé de remplacer sda par hda mais sans succès. En insistant j'ai trouvé cette page : http://wiki.debian.org/Xen#DomU_.28guests.29-2 qui semble indiquer que faire tourner un domU 2.6.32 sur un xen etch est possible. Si j'ai bien compris il ne faut plus utiliser sda* mais xvda*. J'ai modifié la configuration 2.6.18 de mon domU en insérant xvda à la place de sda et cela a fonctionné. Mon domU fonctionne correctement et dans ce domU je peux voir les devices /dev/xvda*. Maintenant si je modifie de la même manière mon domU 2.6.32, je tombe sur la même erreur que précédemment. Mais cela n'est pas surprenant, selon le site mentionné ci-dessus utiliser un domU 2.6.32 nécessite de charger des modules : For those who want to test the 2.6.32 kernel domU on an earlier dom0, you have to make sure that the xen-blkfront domU driver is loaded La question que je me pose maintenant c'est comment savoir si ce module est chargé par mon domU 2.6.32 alors qu'il ne se lance pas ? Comment inspecter la configuration d'un noyau ? Si l'absence de ce module dans le noyau de mon domU 2.6.32 est confirmée, comment ajouter ce module à ce noyau ? Je ne suis pas spécialiste du noyau et je suis preneur d'informations sur les commandes et fichiers en relation avec mon problème. Merci pour vos réponses. Mickaël -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/4e980fad.1040...@free.fr
Re: domU squeeze dans un xen dom0 etch
Bonsoir, Pas spécialiste non plus, mais ce que tu peux tenter c'est quelque-chose de ce genre : Dans le domU dans lequel t'as installé le noyau xenifié 2.6.32, tu ajoutes les noms de modules en question dans /etc/initramfs-tools/modules (tu installes initramfs-tools si c'est pas déjà fait) Puis tu créés un nouvel initrd dans le domU avec une commande du genre : mkinitramfs -k 2.6.32-5-xen-amd64 -o /tmp/initrd.img-2.6.32-5-xen-amd64 Tu remplaces l'initrd de ton /boot/squeeze de dom0 par celui que tu viens de créer ... Et tu rédemarres ta vm pour voir so ça va mieux. A l'occasion fait nous voir ton fichier de conf, ça peut aider ;-) Guy Le 14/10/2011 12:32, Vera Mickael a écrit : Jean-Yves tu m'as mis sur la piste. J'avais déjà essayé de remplacer sda par hda mais sans succès. En insistant j'ai trouvé cette page : http://wiki.debian.org/Xen#DomU_.28guests.29-2 qui semble indiquer que faire tourner un domU 2.6.32 sur un xen etch est possible. Si j'ai bien compris il ne faut plus utiliser sda* mais xvda*. J'ai modifié la configuration 2.6.18 de mon domU en insérant xvda à la place de sda et cela a fonctionné. Mon domU fonctionne correctement et dans ce domU je peux voir les devices /dev/xvda*. Maintenant si je modifie de la même manière mon domU 2.6.32, je tombe sur la même erreur que précédemment. Mais cela n'est pas surprenant, selon le site mentionné ci-dessus utiliser un domU 2.6.32 nécessite de charger des modules : For those who want to test the 2.6.32 kernel domU on an earlier dom0, you have to make sure that the xen-blkfront domU driver is loaded La question que je me pose maintenant c'est comment savoir si ce module est chargé par mon domU 2.6.32 alors qu'il ne se lance pas ? Comment inspecter la configuration d'un noyau ? Si l'absence de ce module dans le noyau de mon domU 2.6.32 est confirmée, comment ajouter ce module à ce noyau ? Je ne suis pas spécialiste du noyau et je suis preneur d'informations sur les commandes et fichiers en relation avec mon problème. Merci pour vos réponses. Mickaël -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/4e98536d.6010...@teledetection.fr
Re: domU squeeze dans un xen dom0 etch
On Fri, 14 Oct 2011 12:32:13 +0200 Vera Mickael vera.mick...@free.fr wrote: Jean-Yves tu m'as mis sur la piste. H: en tout bien, tout honneur, hein! -- -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/2011101418.3ba077dc@anubis.defcon1
Repositórios Debian Etch
Um bom dia a todos.. Alguém poderia me dizer onde encontro repositórios do debian etch ainda ativos? Os oficiais não estão funfando mais... *Grato, **Fábio de Sousa * ~ °v° Seja Livre... /( )\ Use Linux... ^ ^
Re: Repositórios Debian Etch
Adicione somente essa linha no seu /etc/apt/sources.list deb http://archive.debian.org/debian/ etch contrib main non-free Em 14-10-2011 10:38, Fábio de Sousa escreveu: Um bom dia a todos.. Alguém poderia me dizer onde encontro repositórios do debian etch ainda ativos? Os oficiais não estão funfando mais... /Grato, //Fábio de Sousa / ~ °v° Seja Livre... /( )\ Use Linux... ^ ^ -- --- SLot UIN: 19596909 Linux User: 124842 Jabber: s...@jabber-br.org Emails: slot...@gmail.com | s...@xen-br.org
Re: Repositórios Debian Etch
Obrigado.. Funcionou perfeitamente.. Abraço, Fábio ~ °v° Seja Livre... /( )\ Use Linux... ^ ^ Em 14 de outubro de 2011 11:33, Gustavo Soares [SLot] slot...@gmail.comescreveu: Adicione somente essa linha no seu /etc/apt/sources.list deb http://archive.debian.org/debian/ etch contrib main non-free Em 14-10-2011 10:38, Fábio de Sousa escreveu: Um bom dia a todos.. Alguém poderia me dizer onde encontro repositórios do debian etch ainda ativos? Os oficiais não estão funfando mais... *Grato, **Fábio de Sousa * ~ °v° Seja Livre... /( )\ Use Linux... ^ ^ -- --- SLot UIN: 19596909 Linux User: 124842 Jabber: s...@jabber-br.org Emails: slot...@gmail.com | s...@xen-br.org
Re: domU squeeze dans un xen dom0 etch
Bonjour, Désolé de casser le thread :-/ Merci pour vos réponses. J'ai essayé la solution de Guy consistant à copier le noyau squeeze sur le dom0 et à modifier la config du domU. J'obtiens l'erreur fournie en fin de mail. A priori mes recherches indiquent que cela proviendrait d'une incompatibilité de mode PAE des noyaux dom0 et domU. J'ai vérifié, les deux noyaux ont bien le PAE activé (dans /proc/cpuinfo) mais pas de trace deans les fichiers de config du noyau ? Est-ce que quelqu'un saurait d'où peut provenir cette erreur ? Je crains qu'il n'y ait un problème d'incompatibilité entre le vieux xen 3.0 et les noyaux récents 2.6.32. Mickaël [2011-10-13 16:54:58 xend.XendDomainInfo 7299] DEBUG (__init__:1072) XendDomainInfo.construct: None [2011-10-13 16:54:58 xend.XendDomainInfo 7299] DEBUG (__init__:1072) XendDomainInfo.initDomain: 6 1.0 [2011-10-13 16:54:58 xend 7299] DEBUG (__init__:1072) Balloon: 2097896 KiB free; need 2097152; done. [2011-10-13 16:54:58 xend 7299] INFO (__init__:1072) buildDomain os=linux dom=6 vcpus=1 [2011-10-13 16:54:58 xend 7299] DEBUG (__init__:1072) dom = 6 [2011-10-13 16:54:58 xend 7299] DEBUG (__init__:1072) image = /boot/squeeze/vmlinuz-2.6.32-5-xen-amd64 [2011-10-13 16:54:58 xend 7299] DEBUG (__init__:1072) store_evtchn = 1 [2011-10-13 16:54:58 xend 7299] DEBUG (__init__:1072) console_evtchn = 2 [2011-10-13 16:54:58 xend 7299] DEBUG (__init__:1072) cmdline= root=/dev/hda ro [2011-10-13 16:54:58 xend 7299] DEBUG (__init__:1072) ramdisk= /boot/squeeze/initrd.img-2.6.32-5-xen-amd64 [2011-10-13 16:54:58 xend 7299] DEBUG (__init__:1072) vcpus = 1 [2011-10-13 16:54:58 xend 7299] DEBUG (__init__:1072) features = [2011-10-13 16:54:58 xend.XendDomainInfo 7299] ERROR (__init__:1072) Domain construction failed Traceback (most recent call last): File /usr/lib/xen-3.0.3-1/lib/python/xen/xend/XendDomainInfo.py, line 195, in create vm.initDomain() File /usr/lib/xen-3.0.3-1/lib/python/xen/xend/XendDomainInfo.py, line 1363, in initDomain raise VmError(str(exn)) VmError: (22, 'Invalid argument') [2011-10-13 16:54:58 xend.XendDomainInfo 7299] DEBUG (__init__:1072) XendDomainInfo.destroy: domid=6 [2011-10-13 16:54:58 xend.XendDomainInfo 7299] DEBUG (__init__:1072) XendDomainInfo.destroyDomain(6) -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/4e9700ee.3050...@free.fr
Re: domU squeeze dans un xen dom0 etch
On Thu, 13 Oct 2011 17:17:02 +0200 Vera Mickael vera.mick...@free.fr wrote: ... /usr/lib/xen-3.0.3-1/lib/python/xen/xend/XendDomainInfo.py, line 195, in create vm.initDomain() File /usr/lib/xen-3.0.3-1/lib/python/xen/xend/XendDomainInfo.py, line 1363, in initDomain raise VmError(str(exn)) Commentaire de béotien (connaissois point personnellement Xen): n'y aurait'il pas un mix up de /dev/hdXY et de /dev/sdXY ? -- Drilling for oil is boring. -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/20111013182259.1fb8d9df@anubis.defcon1
Re: domU squeeze dans un xen dom0 etch
Tu es bien en 64 bits sur ton dom0 ? On peux pas faire tourner un domU 64bits sur un dom0 32bits Guy Désolé de casser le thread :-/ Merci pour vos réponses. J'ai essayé la solution de Guy consistant à copier le noyau squeeze sur le dom0 et à modifier la config du domU. J'obtiens l'erreur fournie en fin de mail. -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/4e97505c.8070...@teledetection.fr
domU squeeze dans un xen dom0 etch
Bonjour, Nous avons un server qui tourne depuis un moment sous etch que nous n'avons jamais migré. Aujourd'hui nous voudrions installer sur ce serveur de nouvelles applications qui nécessiteraient un environnement squeeze. Nous avons choisis d'explorer la voie xen. Nous avons installé xen (la version de etch), le dom0 fait maintenant fonctionner tous nos services. Il n'y a eu qu'une minute ou deux d'interruption le temps du reboot, c'est très appréciable, la machine avait un uptime de presque 500 jours. Nous avons facilement atteint notre premier objectif. Nous avons ensuite créé un domU PV squeeze qui semble fonctionner correctement. Mais quand je me connecte sur ce domU et que je tape uname -a je vois que le noyau utilisé est celui de etch (2.6.18). Je suis aussi surpris quand je tape dans le domU aptitude search linux-image de voir qu'aucun noyau n'est installé. Je devine que la création d'un domU doit être un peu particulière comparée à une installation sur une machine physique et en me documentant j'ai effectivement lu quelques documents traitant du partage des noyaux entre dom0 et domU. Mes questions sont les suivantes : Faut-il faire des efforts pour que notre domU squeeze utilise un noyau 2.6.32 ou notre domU squeeze va-t-il très bien fonctionner avec un noyau 2.6.18 ? Nous n'avons pas de besoins liés à une version particulière du noyau. S'il faut migrer vers un nouveau noyau, quel noyau installer depuis quel environnement ? Installer linux-image-2.6.32-5-xen-amd64 depuis le domU (aptitude install) va-t-il être suffisant et surtout ne pas casser notre dom0 ? Ce que nous voudrions éviter, c'est de migrer toute l'infrastructure xen + dom0 vers squeeze puis de créer un domU etch de déplacer nos applications dans ce domU. Cela impliquerait des manipulations complexes et une interruption de services. Merci d'avance pour toute réponse. Mickaël -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/4e95961b.30...@free.fr
Re: domU squeeze dans un xen dom0 etch
Le 10/12/11 15:28, Vera Mickael a écrit : Bonjour, Bonjour, Nous avons ensuite créé un domU PV squeeze qui semble fonctionner correctement. Mais quand je me connecte sur ce domU et que je tape uname -a je vois que le noyau utilisé est celui de etch (2.6.18). Je suis aussi surpris quand je tape dans le domU aptitude search linux-image de voir qu'aucun noyau n'est installé. Si le domU est en PV c'est donc le dom0 qui lors du lancement du domU 'passe' le noyau a executer (Les puristes de la virtualisation m'excuseront sur ma simplification) La version du noyau est désignée dans le fichier de conf, et ne dépend pas des paquest installés dans le domU Mes questions sont les suivantes : Faut-il faire des efforts pour que notre domU squeeze utilise un noyau 2.6.32 ou notre domU squeeze va-t-il très bien fonctionner avec un noyau 2.6.18 ? Nous n'avons pas de besoins liés à une version particulière du noyau. Pour moi cela a fonctionné avec un 2.6.18 sur un domU Lenny (pas tenté en squeeze) Mais il est facile de deposer (sans installer) dans le dom0 les initrd et vmlinuz d'une autre version de noyau pour tester. Pascal -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/4e959cda.2080...@shom.fr
Re: domU squeeze dans un xen dom0 etch
On Wed, 12 Oct 2011 15:28:59 +0200 Vera Mickael vera.mick...@free.fr wrote: ... fonctionner correctement. Mais quand je me connecte sur ce domU et que je tape uname -a je vois que le noyau utilisé est celui de etch (2.6.18). Je suis aussi surpris quand je tape dans le domU aptitude search linux-image de voir qu'aucun noyau n'est installé. Sans doute pcq les executables sont restés en place mais non-enregistrés dans la DB d'aptitude. ... Faut-il faire des efforts pour que notre domU squeeze utilise un noyau 2.6.32 ou notre domU squeeze va-t-il très bien fonctionner avec un noyau 2.6.18 ? Nous n'avons pas de besoins liés à une version particulière du noyau. Bcp de changements sont intervenus entre les 2 versions; bien que tout fonctionne farpaitement une future migration risque d'être plus épineuse (bien que ça ne soit pas une règle, il est en Gal plus facile de faire A-B-C que A-C). S'il faut migrer vers un nouveau noyau, quel noyau installer depuis quel environnement ? Installer linux-image-2.6.32-5-xen-amd64 depuis le domU (aptitude install) va-t-il être suffisant et surtout ne pas casser notre dom0 ? Le meilleure façon de faire reste le test: tu travailles sur une copie de l'image actuelle, et une fois que tout roule tu bascules l'original. -- Using words to describe magic is like using a screwdriver to cut roast beef. -- Tom Robbins -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/20111012160236.22215771@anubis.defcon1
Re: domU squeeze dans un xen dom0 etch
Le 12/10/2011 15:28, Vera Mickael a écrit : Nous avons ensuite créé un domU PV squeeze qui semble fonctionner correctement. Mais quand je me connecte sur ce domU et que je tape uname -a je vois que le noyau utilisé est celui de etch (2.6.18). Je suis aussi surpris quand je tape dans le domU aptitude search linux-image de voir qu'aucun noyau n'est installé. Bonjour, Effectivement, le DomU, utilise en général le noyau du Dom0. Il est possible de le changer en modifiant les paramètres kernel dans le fichier .cfg du Dom0, mais ce ne serait pas une bonne solution car votre Dom0 resterait sous etch, ce qui compliquerait par exemple les taches de mises à jours du noyau. La solution qui me semble la plus intéressante serait de d'installer directement un noyau 2.6.32 sur le DomU ainsi qu'un grub-legacy. Comme cela, votre machine virtuelle n'utiliserait plus le noyau du Dom0. Cela implique d'utiliser pygrub, en fait, il suffit de ne plus indiquer le noyau dans la conf du DomU et à la place de lui indiquer qu'il doit utiliser pygrub: bootloader = '/usr/lib/xen-default/bin/pygrub' Je procède comme ça pour faire tourner des DomU squeeze sur des machines Dom0 Lenny, je n'ai plus de machine sous Etch, mais il me semble que pygrub fonctionne également pour Etch. smime.p7s Description: S/MIME Cryptographic Signature
Re: domU squeeze dans un xen dom0 etch
Bonsoir, Faire pointer ton fichier de conf sur la version du noyau qui t'intéresse. p.ex. dans /etc/xen/mondomU.cfg on peut avoir ça : kernel = '/boot/squeeze/vmlinuz-2.6.32-5-xen-amd64' ramdisk = '/boot/squeeze/initrd.img-2.6.32-5-xen-amd64' Tu peux récupérer ces 2 fichiers directement dans ton domu en installant : aptitude install linux-image-2.6.32-5-xen-amd64 Tu copies alors les 2 fichiers qui se trouvent dans le /boot de dans ton domU vers ton dom0 dans le dossier /boot/squeeze (dans l'exemple) Note que l'install de ce paquet dans ton domU ne sert à rien, si ce n'est à récupérer ces 2 fichiers. Il faut arrêter le domU puis xm delete mondomU et faire un xm create pour que le changement de noyau soit pris en compte par le domU Chez moi ça marche avec un dom0 lenny. pas testé avec un dom0 etch. Guy Le 12/10/2011 15:28, Vera Mickael a écrit : Bonjour, Nous avons un server qui tourne depuis un moment sous etch que nous n'avons jamais migré. Aujourd'hui nous voudrions installer sur ce serveur de nouvelles applications qui nécessiteraient un environnement squeeze. Nous avons choisis d'explorer la voie xen. Nous avons installé xen (la version de etch), le dom0 fait maintenant fonctionner tous nos services. Il n'y a eu qu'une minute ou deux d'interruption le temps du reboot, c'est très appréciable, la machine avait un uptime de presque 500 jours. Nous avons facilement atteint notre premier objectif. Nous avons ensuite créé un domU PV squeeze qui semble fonctionner correctement. Mais quand je me connecte sur ce domU et que je tape uname -a je vois que le noyau utilisé est celui de etch (2.6.18). Je suis aussi surpris quand je tape dans le domU aptitude search linux-image de voir qu'aucun noyau n'est installé. Je devine que la création d'un domU doit être un peu particulière comparée à une installation sur une machine physique et en me documentant j'ai effectivement lu quelques documents traitant du partage des noyaux entre dom0 et domU. Mes questions sont les suivantes : Faut-il faire des efforts pour que notre domU squeeze utilise un noyau 2.6.32 ou notre domU squeeze va-t-il très bien fonctionner avec un noyau 2.6.18 ? Nous n'avons pas de besoins liés à une version particulière du noyau. S'il faut migrer vers un nouveau noyau, quel noyau installer depuis quel environnement ? Installer linux-image-2.6.32-5-xen-amd64 depuis le domU (aptitude install) va-t-il être suffisant et surtout ne pas casser notre dom0 ? Ce que nous voudrions éviter, c'est de migrer toute l'infrastructure xen + dom0 vers squeeze puis de créer un domU etch de déplacer nos applications dans ce domU. Cela impliquerait des manipulations complexes et une interruption de services. Merci d'avance pour toute réponse. Mickaël -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/4e95ba4e.8090...@teledetection.fr
Problem installing Etch using local mirror
Hi, I'm trying to install Debian Etch from floppy and local mirror. It fails with message: The specified Debian archive mirror is either not available, or does not have a valid Release file on it. Please try a different mirror. Before I get bashed for this question, I'd like to explain that I want to install Debian on a very old laptop (Celeron 300MHz, 64MB RAM), which doesn't have a CD/DVD drive, doesn't boot from network, doesn't boot from USB and I can't remove its HDD. That's why I decided to use Etch, as it still had floppy install images. Before I tried installing it on a real hardware, I decided to test everything on a virtual machine. First I tried a regular mirror over http - failed (I understand that, etch is archived). Then I tried archive.debian.org - failed. Then I created a local mirror on my bigger Debian machine using apt-mirror. The installation failed again with the same message. During several failed attempts, I created symbolic links stable and oldstable to etch. Then I spied a little using wireshark. The installation requests the release file /debian/dists/oldstable/Release - which is returned with HTTP OK. Then it requests /debian/dists/etch/Release, which also finishes with a successful file transfer. Still the same error. No other files are requested from the mirror. I assume it's not a network or file-naming problem. What else can be wrong? Corrupted mirror? Invalid signatures? The beggining of the release file is as follows: Origin: Debian Label: Debian Suite: oldstable Version: 4.0r9 Codename: etch Date: Sat, 22 May 2010 14:22:09 UTC Architectures: alpha amd64 arm hppa i386 ia64 mips mipsel powerpc s390 sparc Components: main contrib non-free Description: Debian 4.0r9 Released 22nd May 2010 MD5Sum: 88e31747739f3ea9445fe543b21061b5 10910068 Contents-powerpc.g I mirrored main contrib and non-free, only i386. The VM is Virtual Box, configured for 32bit Debian with floppy, small HDD, bridged network and 64MB RAM. My mirror machine is 64 bit Debian on Core2Quad processor - Linux StrikeNoir 2.6.32-5-amd64 #1 SMP Tue Jun 14 09:42:28 UTC 2011 x86_64 GNU/Linux The old laptop is Twinhead with Celeron processor. If someone knows how to bypass this and install Linux on this old laptop in a different way, I'll be happy to hear that. Still, I want to know what is wrong with my current procedure. Please help. Best regards, Michal Kurowski -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/1315594657.2806.35.ca...@strikenoir.home
Re: Problem installing Etch using local mirror
Lurker_pas wrote: Then I tried archive.debian.org - failed. I would poke at this more closely. Why is this failing? I have a few obsolete Etch and even Sarge machines still hitting that archive and they are validating the archive okay. Seems to me that part should be working and that problem is probably the root cause of your trouble. If you figure that out you might be golden. You should be able to point your newer machines at the archive. All of the package versions will be older and so nothing will want to install. But updating should validate the release signatures. You may need to add the old key to your apt-key though. But the older installation would already have it. Can you debootstrap Etch? I would think that you could. It might be another way to validate your archive. Not as an install method for your machine but as a way to validate that you could install from your archive. I just tried an Etch debootstrap and it worked okay for me. debootstrap etch etch-chroot http://archive.debian.org/debian If someone knows how to bypass this and install Linux on this old laptop in a different way, I'll be happy to hear that. Still, I want to know what is wrong with my current procedure. Another possibility would be Syslinux. The upstream Syslinux site is down for me at this moment making it hard for me to check docs but as I recall it still supports floppy disk booting and has a process to bootstrap a network boot from a floppy disk boot. And etherboot. The etherboot howtos are available now so I will pass those along. http://etherboot.org/wiki/howtos http://etherboot.org/wiki/removable Note that I haven't tried it yet. I just remember having seen it. But it looks like it might be a way for you to install over the network but bootstrapping yourself entirely from the floppy disk. Bob signature.asc Description: Digital signature
Re: Problem installing Etch using local mirror
Bob Proulx b...@proulx.com writes: […] Another possibility would be Syslinux. The upstream Syslinux site is down for me at this moment making it hard for me to check docs but as I recall it still supports floppy disk booting and has a process to bootstrap a network boot from a floppy disk boot. And etherboot. I vaguely recall that Etherboot has become gPXE some time ago. In my experience, a floppy with gPXE installed instantly brings the network boot capability to older hardware. […] -- FSF associate member #7257 Coming soon: Software Freedom Day http://mail.sf-day.org/lists/listinfo/ planning-ru (ru), sfd-discuss (en) -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/86obyt4ht1@gray.siamics.net
Re: Recuperar o GRUB no Debian 4.0 Etch
Prezados Rodrigo, Rodolfo e Helton, muito obrigado pela ajuda de vcs, consegui fazer o que precisei. Abraços, Moksha tux Em 2 de julho de 2011 19:47, Rodrigo B Brasil rodrigobbra...@gmail.comescreveu: Basta criar uma pasta que será o diretório raiz do teu antigo sistema e montar as partições em seus devidos lugares: mkdir /mnt/sys mount /dev/sda1 /mnt/sys mount /dev/sda2 /mnt/sys/boot Não sei se é necessário montar esses dois abaixo, mas... :-P mount -t proc /proc /mnt/dev/proc mount --bind /dev /mnt/sys/dev E depois modificar o diretório do raiz do sistema: chroot /mnt/sys Depois disso tu podes rodar de cara um: grub-install /dev/sda ou entrar no próprio grub com: grub. Dentro dele tu podes fazer: find /boot/grub/stage1 (pra ter certeza onde tens que instalar mesmo) setup (hdX) Só sair e reiniciar. -- Rodrigo Bezerra Brasil Belém, PA, Brasil 'Software Livre é uma questão de liberdade, não de preço. Para entender o conceito, você deve pensar em liberdade de expressão, não em cerveja grátis.' 2011/7/2 Rodolfo rof20...@gmail.com Posso te da uma dica de como salvar a mbr. Eu sempre faço isso, caso eu perca a MBR e a tabela de partições. dd if=/dev/sda of=backup.mbr bs=512 count=1 onde sda é a mbr do hd que quero salvar, e backup.mbr é a mbr salva em arquivo(lembre de salvar em um pen drive ou etc), depois é só usar um live cd e executar o inverso. dd if=backup.mbr of=/dev/sda isso é só para prevenir algum acidente. Agora recuperar como o Rodrigo falou, eu não sei fazer, mas tenho uma idéia, acho que ele quer ki vc edite o arquivo grub perdido, colocando as informações corretas, daí vc tenta usar alguma comando (update-grub parece) para tentar restaurar as informações na MBR. Eu acho que é isso '-' Abraços. Em 1 de julho de 2011 23:40, Moksha Tux gova...@gmail.com escreveu: Perdão a ignorância... como assim? Moksha Em 1 de julho de 2011 20:04, Rodrigo B Brasil rodrigobbra...@gmail.comescreveu: Não daria pra bootar com o livecd, fazer um chroot e depois rodar o root e setup dentro da interface de linha de comando do GRUB? -- Rodrigo Bezerra Brasil Belém, PA, Brasil 'Software Livre é uma questão de liberdade, não de preço. Para entender o conceito, você deve pensar em liberdade de expressão, não em cerveja grátis.' 2011/7/1 Moksha Tux gova...@gmail.com Boa noite pessoal! Preciso de uma grande ajuda... perdi o grub de um servidor meu que roda o Debian 4.0, eu até tenho um CD do etch ainda mas é o último (RC8) mas acredito que a versão do Kernel do meu sistema não é tão atualizado assim, na internet eu só vejo artigos dizendo que devo usar qualquer live cd do Ubuntu e fazer a recuperação mas o Ubuntu já usa o GRUB 2 e o ETCH não como devo fazer esta recuperação sem perder nada que tenho neste servidor? Abraços, Moksha Tux
Re: recuperar o GRUB no Debian 4.0 Etch
Estas informações para recuperar o grub legacy, ou seja o grub que está dando o lugar para o grub2, estão nestas urls. Eu vi os posts que foram escritos aqui e estão de acordo com a verdade que conheço. Para recuperar o grub2 enconteri um programa, que no meu caso, trabalhou muito bem e me deixou muito satisfeito: É o Grub Customizer, que pode ser instalado no debian e no ubuntu-11.04. Tem como recuperar novamente o Grub? http://www.vivaolinux.com.br/perguntas/verPergunta.php?codigo=5393 [Tutorial] Como restaurar o Grub depois de instalar o Windows http://forum.clubedohardware.com.br/tutorial-como-restaurar/535255 como configurar o grub - gerenciador de inicialização no Linux http://www.linuxnarede.com.br/artigos/fullnews.php?id=147 O gerenciador de boot GRUB http://www.vivaolinux.com.br/dica/Recuperar-gerenciador-de-boot-Grub É a minha contribuição! ramao.mart...@gmail.com -- To UNSUBSCRIBE, email to debian-user-portuguese-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/CAEriZZjvFfAWor=CO7mW+BGsfcqWRYUCcmA8dYWjR0Yjjs+=h...@mail.gmail.com
Re: Recuperar o GRUB no Debian 4.0 Etch
Posso te da uma dica de como salvar a mbr. Eu sempre faço isso, caso eu perca a MBR e a tabela de partições. dd if=/dev/sda of=backup.mbr bs=512 count=1 onde sda é a mbr do hd que quero salvar, e backup.mbr é a mbr salva em arquivo(lembre de salvar em um pen drive ou etc), depois é só usar um live cd e executar o inverso. dd if=backup.mbr of=/dev/sda isso é só para prevenir algum acidente. Agora recuperar como o Rodrigo falou, eu não sei fazer, mas tenho uma idéia, acho que ele quer ki vc edite o arquivo grub perdido, colocando as informações corretas, daí vc tenta usar alguma comando (update-grub parece) para tentar restaurar as informações na MBR. Eu acho que é isso '-' Abraços. Em 1 de julho de 2011 23:40, Moksha Tux gova...@gmail.com escreveu: Perdão a ignorância... como assim? Moksha Em 1 de julho de 2011 20:04, Rodrigo B Brasil rodrigobbra...@gmail.comescreveu: Não daria pra bootar com o livecd, fazer um chroot e depois rodar o root e setup dentro da interface de linha de comando do GRUB? -- Rodrigo Bezerra Brasil Belém, PA, Brasil 'Software Livre é uma questão de liberdade, não de preço. Para entender o conceito, você deve pensar em liberdade de expressão, não em cerveja grátis.' 2011/7/1 Moksha Tux gova...@gmail.com Boa noite pessoal! Preciso de uma grande ajuda... perdi o grub de um servidor meu que roda o Debian 4.0, eu até tenho um CD do etch ainda mas é o último (RC8) mas acredito que a versão do Kernel do meu sistema não é tão atualizado assim, na internet eu só vejo artigos dizendo que devo usar qualquer live cd do Ubuntu e fazer a recuperação mas o Ubuntu já usa o GRUB 2 e o ETCH não como devo fazer esta recuperação sem perder nada que tenho neste servidor? Abraços, Moksha Tux
Re: Recuperar o GRUB no Debian 4.0 Etch
Basta criar uma pasta que será o diretório raiz do teu antigo sistema e montar as partições em seus devidos lugares: mkdir /mnt/sys mount /dev/sda1 /mnt/sys mount /dev/sda2 /mnt/sys/boot Não sei se é necessário montar esses dois abaixo, mas... :-P mount -t proc /proc /mnt/dev/proc mount --bind /dev /mnt/sys/dev E depois modificar o diretório do raiz do sistema: chroot /mnt/sys Depois disso tu podes rodar de cara um: grub-install /dev/sda ou entrar no próprio grub com: grub. Dentro dele tu podes fazer: find /boot/grub/stage1 (pra ter certeza onde tens que instalar mesmo) setup (hdX) Só sair e reiniciar. -- Rodrigo Bezerra Brasil Belém, PA, Brasil 'Software Livre é uma questão de liberdade, não de preço. Para entender o conceito, você deve pensar em liberdade de expressão, não em cerveja grátis.' 2011/7/2 Rodolfo rof20...@gmail.com Posso te da uma dica de como salvar a mbr. Eu sempre faço isso, caso eu perca a MBR e a tabela de partições. dd if=/dev/sda of=backup.mbr bs=512 count=1 onde sda é a mbr do hd que quero salvar, e backup.mbr é a mbr salva em arquivo(lembre de salvar em um pen drive ou etc), depois é só usar um live cd e executar o inverso. dd if=backup.mbr of=/dev/sda isso é só para prevenir algum acidente. Agora recuperar como o Rodrigo falou, eu não sei fazer, mas tenho uma idéia, acho que ele quer ki vc edite o arquivo grub perdido, colocando as informações corretas, daí vc tenta usar alguma comando (update-grub parece) para tentar restaurar as informações na MBR. Eu acho que é isso '-' Abraços. Em 1 de julho de 2011 23:40, Moksha Tux gova...@gmail.com escreveu: Perdão a ignorância... como assim? Moksha Em 1 de julho de 2011 20:04, Rodrigo B Brasil rodrigobbra...@gmail.comescreveu: Não daria pra bootar com o livecd, fazer um chroot e depois rodar o root e setup dentro da interface de linha de comando do GRUB? -- Rodrigo Bezerra Brasil Belém, PA, Brasil 'Software Livre é uma questão de liberdade, não de preço. Para entender o conceito, você deve pensar em liberdade de expressão, não em cerveja grátis.' 2011/7/1 Moksha Tux gova...@gmail.com Boa noite pessoal! Preciso de uma grande ajuda... perdi o grub de um servidor meu que roda o Debian 4.0, eu até tenho um CD do etch ainda mas é o último (RC8) mas acredito que a versão do Kernel do meu sistema não é tão atualizado assim, na internet eu só vejo artigos dizendo que devo usar qualquer live cd do Ubuntu e fazer a recuperação mas o Ubuntu já usa o GRUB 2 e o ETCH não como devo fazer esta recuperação sem perder nada que tenho neste servidor? Abraços, Moksha Tux
Recuperar o GRUB no Debian 4.0 Etch
Boa noite pessoal! Preciso de uma grande ajuda... perdi o grub de um servidor meu que roda o Debian 4.0, eu até tenho um CD do etch ainda mas é o último (RC8) mas acredito que a versão do Kernel do meu sistema não é tão atualizado assim, na internet eu só vejo artigos dizendo que devo usar qualquer live cd do Ubuntu e fazer a recuperação mas o Ubuntu já usa o GRUB 2 e o ETCH não como devo fazer esta recuperação sem perder nada que tenho neste servidor? Abraços, Moksha Tux
Re: Recuperar o GRUB no Debian 4.0 Etch
Não daria pra bootar com o livecd, fazer um chroot e depois rodar o root e setup dentro da interface de linha de comando do GRUB? -- Rodrigo Bezerra Brasil Belém, PA, Brasil 'Software Livre é uma questão de liberdade, não de preço. Para entender o conceito, você deve pensar em liberdade de expressão, não em cerveja grátis.' 2011/7/1 Moksha Tux gova...@gmail.com Boa noite pessoal! Preciso de uma grande ajuda... perdi o grub de um servidor meu que roda o Debian 4.0, eu até tenho um CD do etch ainda mas é o último (RC8) mas acredito que a versão do Kernel do meu sistema não é tão atualizado assim, na internet eu só vejo artigos dizendo que devo usar qualquer live cd do Ubuntu e fazer a recuperação mas o Ubuntu já usa o GRUB 2 e o ETCH não como devo fazer esta recuperação sem perder nada que tenho neste servidor? Abraços, Moksha Tux
Re: Recuperar o GRUB no Debian 4.0 Etch
Perdão a ignorância... como assim? Moksha Em 1 de julho de 2011 20:04, Rodrigo B Brasil rodrigobbra...@gmail.comescreveu: Não daria pra bootar com o livecd, fazer um chroot e depois rodar o root e setup dentro da interface de linha de comando do GRUB? -- Rodrigo Bezerra Brasil Belém, PA, Brasil 'Software Livre é uma questão de liberdade, não de preço. Para entender o conceito, você deve pensar em liberdade de expressão, não em cerveja grátis.' 2011/7/1 Moksha Tux gova...@gmail.com Boa noite pessoal! Preciso de uma grande ajuda... perdi o grub de um servidor meu que roda o Debian 4.0, eu até tenho um CD do etch ainda mas é o último (RC8) mas acredito que a versão do Kernel do meu sistema não é tão atualizado assim, na internet eu só vejo artigos dizendo que devo usar qualquer live cd do Ubuntu e fazer a recuperação mas o Ubuntu já usa o GRUB 2 e o ETCH não como devo fazer esta recuperação sem perder nada que tenho neste servidor? Abraços, Moksha Tux
Re: Dépot pour etch
Bonjour, J'ai donc installé le système de base sans problème, et je suis donc parti modifié mon sources.list mais je n'y arrive pas. J'ai bien vu les dépots ici : http://archive.debian.org/debian/dists/Debian-4.0/ j'ai essayé différent truc mais y arrive po je cherche. Merci pour votre aide -- Nahliel -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/20110525085603.ga30...@srvdebian.info-cr.fr
Re: Dépot pour etch
C'est bon j'ai trouvé ça à l'air de fonctionner par contre j'ai un problème de clé. -- Nahliel -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/20110525090739.ga31...@srvdebian.info-cr.fr
Re: Dépot pour etch
Le Wed, 25 May 2011 10:56:03 +0200, Nahliel Steinberg nahliel.steinb...@gmail.com a écrit : Bonjour, J'ai donc installé le système de base sans problème, et je suis donc parti modifié mon sources.list mais je n'y arrive pas. J'ai bien vu les dépots ici : http://archive.debian.org/debian/dists/Debian-4.0/ j'ai essayé différent truc mais y arrive po je cherche. Merci pour votre aide bonjour, voici le mode opératoire : cat /usr/share/doc/apt/examples/sources.list |grep deb |sed -e 's/stable/oldstable/g' ~/sources.list-1 mode root : cd /etc/apt/ mv sources.list sources.list-Origin cat /home/user/sources.list-1 sources.list apt-get update apt-get upgrade reste à appliquer slt bernard -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/20110525111614.33d6d40e.bernard.schoenac...@free.fr
Re: Dépot pour etch
J'ai pu me dépatouiller tout seul. j'avais testé le gpg --keserver etc mais rien non plus j'eu lu ailleurs qu'il fallait simplement installer le apt-keyring qui règle mon pb Merci encore de votre aide. Le 25/05/11 at 11:23, Bernard Schoenacker a ecrit: Le Wed, 25 May 2011 11:07:39 +0200, Nahliel Steinberg nahliel.steinb...@gmail.com a écrit : C'est bon j'ai trouvé ça à l'air de fonctionner par contre j'ai un problème de clé. bonjour, voici comment j'ai résolu le problème : script de base permettant de télécharger les clefs. # nohup apt-get update --fix-missing ## la clef est en position à la 23° colonne # for elt in `cat nohup.out |grep NO_PUBKEY |awk '{print $23}'|xargs` ## la clef est en position à la 21° colonne # for elt in `cat nohup.out |grep NO_PUBKEY |awk '{print $21}'|xargs` ### ajouter les clefs gnupg # do # gpg --keyserver wwwkeys.eu.pgp.net --recv-key $elt # gpg --keyserver pgpkeys.mit.edu --recv-key $elt # gpg --fingerprint $elt # gpg -a --export $elt | apt-key add - # done pour l'activer il suffit simplement de décommenter les lignes ... slt bernard fin du message de Bernard Schoenacker -- Nahliel -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/20110525142103.gb31...@srvdebian.info-cr.fr
Dépot pour etch
Je suis en train de monter un vieille etch, pour un besoin particulier, est-ce qu'il existe encore un mirroir pour cette version 4.0 de debian ?
Re: Dépot pour etch
Hello, Le mardi 24 mai 2011 à 12:47 +0200, Nahliel Steinberg a écrit : Je suis en train de monter un vieille etch, pour un besoin particulier, est-ce qu'il existe encore un mirroir pour cette version 4.0 de debian ? Tu n'as pas du chercher longtemps... http://www.debian.org/distrib/archive Bruno -- MODE M : Fumer des pétards, c'est un moyen pour les humains de faire jeune, cool, rebelle... P : C'est complètement con ! M : Bof... pas plus que de voter Cohn-Bendit pour faire de gauche... signature.asc Description: This is a digitally signed message part
Re: Dépot pour etch
Le Tue, 24 May 2011 12:47:09 +0200, Nahliel Steinberg nahliel.steinb...@gmail.com a écrit : Je suis en train de monter un vieille etch, pour un besoin particulier, est-ce qu'il existe encore un mirroir pour cette version 4.0 de debian ? bonjour, voici les différents liens pour la partie oldstable : http://wiki.debian.org/DebianOldStable http://archive.debian.org/README http://archive.debian.org/debian/dists/ slt bernard -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/20110524130844.4b2ca192.bernard.schoenac...@free.fr
Re: Dépot pour etch
bonjour, voici les différents liens pour la partie oldstable : http://wiki.debian.org/DebianOldStable http://archive.debian.org/README http://archive.debian.org/debian/dists/ slt Merci beaucoup, j'ai une question, lorsque je suis en pleine installation avec la netinstall comment puis-je lui indiqué les dépots ? ctrl+alt+f1 pour allez éditer le sources.list ? -- Nahliel -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/20110524121255.gb9...@srvdebian.info-cr.fr
Re: Dépot pour etch
Le Tue, 24 May 2011 14:12:55 +0200, Nahliel Steinberg nahliel.steinb...@gmail.com a écrit : bonjour, voici les différents liens pour la partie oldstable : http://wiki.debian.org/DebianOldStable http://archive.debian.org/README http://archive.debian.org/debian/dists/ slt Merci beaucoup, j'ai une question, lorsque je suis en pleine installation avec la netinstall comment puis-je lui indiqué les dépots ? ctrl+alt+f1 pour allez éditer le sources.list ? bonjour, pour le fichier sources.list il sufira de finir la première install de base et à la fin tu met en place le fichier sources.list slt bernard -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/20110524152423.099c58ff.bernard.schoenac...@free.fr
Re: Iso Debian ETCH
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On 23-05-2011 13:32, Sinval Júnior wrote: Senhores, estou precisando instalar o Etch para fazer uns testes contudo não encontro a iso para download. Aguem sabe onde tem? http://cdimage.debian.org/cdimage/archive/ Abraço, - -- Felipe Augusto van de Wiel (faw) Debian. Freedom to code. Code to freedom! -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.11 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/ iEYEARECAAYFAk3bS0cACgkQCjAO0JDlykZw2QCfZ/U1m/ui/UI7wYqUETQe/tet 9rwAnR/a3TqITtk+DMHi7K8s0QsavUer =v6WG -END PGP SIGNATURE- -- To UNSUBSCRIBE, email to debian-user-portuguese-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4ddb4b48.5050...@funlabs.org
Re: Iso Debian ETCH
Valeu, galera. Obrigado. Tive que mudar o source.list deb http://archive.debian.org/debian/ etch contrib main non-free 2011/5/24 Felipe Augusto van de Wiel (faw) f...@funlabs.org -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On 23-05-2011 13:32, Sinval Júnior wrote: Senhores, estou precisando instalar o Etch para fazer uns testes contudo não encontro a iso para download. Aguem sabe onde tem? http://cdimage.debian.org/cdimage/archive/ Abraço, - -- Felipe Augusto van de Wiel (faw) Debian. Freedom to code. Code to freedom! -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.11 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/ iEYEARECAAYFAk3bS0cACgkQCjAO0JDlykZw2QCfZ/U1m/ui/UI7wYqUETQe/tet 9rwAnR/a3TqITtk+DMHi7K8s0QsavUer =v6WG -END PGP SIGNATURE- -- To UNSUBSCRIBE, email to debian-user-portuguese-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4ddb4b48.5050...@funlabs.org -- Ao encaminhar esta mensagem, por favor: 1 - Apague meu endereço eletrônico; 2 - Apague também os endereços dos amigos que receberam juntamente com você a mensagem, antes de enviar; 3 - Encaminhe como Cópia Oculta (Cco ou BCc) aos seus destinatários. Dificulte assim a disseminação de vírus, spams e banners. #=+ #!/usr/bin/env python nome = 'Sinval Júnior' email = 'sinvalju arroba gmail ponto com' print nome print email #==+
Iso Debian ETCH
Senhores, estou precisando instalar o Etch para fazer uns testes contudo não encontro a iso para download. Aguem sabe onde tem? -- Ao encaminhar esta mensagem, por favor: 1 - Apague meu endereço eletrônico; 2 - Apague também os endereços dos amigos que receberam juntamente com você a mensagem, antes de enviar; 3 - Encaminhe como Cópia Oculta (Cco ou BCc) aos seus destinatários. Dificulte assim a disseminação de vírus, spams e banners. #=+ #!/usr/bin/env python nome = 'Sinval Júnior' email = 'sinvalju arroba gmail ponto com' print nome print email #==+
Re: Iso Debian ETCH
Olá Sinval, Voce pode baixar essa iso que é o mesmo Debian Etch http://livre.wiki.br/jsite/index.php?option=com_contentview=articleid=61Itemid=68 -- Marcos João Botucatu - SP http://solucoeslinux.webnode.com.br Em Seg, 2011-05-23 às 13:32 -0300, Sinval Júnior escreveu: Senhores, estou precisando instalar o Etch para fazer uns testes contudo não encontro a iso para download. Aguem sabe onde tem? -- Ao encaminhar esta mensagem, por favor: 1 - Apague meu endereço eletrônico; 2 - Apague também os endereços dos amigos que receberam juntamente com você a mensagem, antes de enviar; 3 - Encaminhe como Cópia Oculta (Cco ou BCc) aos seus destinatários. Dificulte assim a disseminação de vírus, spams e banners. #=+ #!/usr/bin/env python nome = 'Sinval Júnior' email = 'sinvalju arroba gmail ponto com' print nome print email #==+ -- To UNSUBSCRIBE, email to debian-user-portuguese-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/1306177163.2780.3.camel@livre
Re: experiencias con upgrade de etch a Lenny
On Miércoles 27 Abril 2011 03:33:44 Alvaro Flores escribió: Estimados, Necesito upgradear un servidor con debian etch a lenny (o squeeze da igual), ya que ni repositorio encuentro para esta distro... El servidor tiene una intranet montada con apache, base de datos en mysql y varios escripts en perl... el tema es que me da miedo hacer el upgrade de esta guia ( http://www.cyberciti.biz/tips/howto-upgrade-debian-linux-4etch-to-5lenny-se rver.html ), quedará algo jodido o lo puedo hacer confiado ? Confiado no, siempre te puede sugir alguna incidencia. Pero yo creo que será resoluble. ¿Alguna experiencia personal y sus respectivos peros o cuidados a tener con respecto a los upgrades de distros? Saludos, Álvaro.S Puestos a squeeze Yo me saltaría varios pasos del howto, pero si te quedas mas tranquilo (el howto te salta a stable (squeeze). Y no usaría aptitude tiene ideas particulares sobre las dependencias a mi me ha dado algun susto, yo usaria apt-get O será que le tengo paquete. actualizas la etch #apt-get upgrade cambias el sources.list para que apunten a la stable (squeeze) # apt-get update # apt-get dist-upgrade y ya. Y si se atasca apt-get -f install Pero te digo que estos días he saltado a sid para meter kde 4.6.2 y sin problemas luego un downgrade a squeeze y punto. Pero hablas de un server. hay que tener mucho cuidado. Pero si es apache, mysql no deberías tener problemas. Si tienes autentificación con ldap tiene mas miga. Y tal vez tengas que reescribir algun script Tendrás que reconfigurar algun servicio el salto de dos distros es grande. Y hay cosas que han cambiado como ldap por ejemplo. Y udev, etc, etc. Pero no te olvides de hacer un backup de todos los datos, antes por si acaso 8=} murphy es un cabrón ya sabes si puede ir mal irá mal Y si sale mal, haces una instalación limpia de squeeze bonita aventura. un Saludo BasaBuru -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/201104271218.59215.basab...@basatu.org
Re: experiencias con upgrade de etch a Lenny
El día 27 de abril de 2011 12:18, BasaBuru basab...@basatu.org escribió: On Miércoles 27 Abril 2011 03:33:44 Alvaro Flores escribió: Estimados, Necesito upgradear un servidor con debian etch a lenny (o squeeze da igual), ya que ni repositorio encuentro para esta distro... El servidor tiene una intranet montada con apache, base de datos en mysql y varios escripts en perl... el tema es que me da miedo hacer el upgrade de esta guia ( http://www.cyberciti.biz/tips/howto-upgrade-debian-linux-4etch-to-5lenny-se rver.html ), quedará algo jodido o lo puedo hacer confiado ? Confiado no, siempre te puede sugir alguna incidencia. Pero yo creo que será resoluble. ¿Alguna experiencia personal y sus respectivos peros o cuidados a tener con respecto a los upgrades de distros? Saludos, Álvaro.S Puestos a squeeze Yo me saltaría varios pasos del howto, pero si te quedas mas tranquilo (el howto te salta a stable (squeeze). Y no usaría aptitude tiene ideas particulares sobre las dependencias a mi me ha dado algun susto, yo usaria apt-get O será que le tengo paquete. actualizas la etch #apt-get upgrade cambias el sources.list para que apunten a la stable (squeeze) # apt-get update # apt-get dist-upgrade y ya. Y si se atasca apt-get -f install Pero te digo que estos días he saltado a sid para meter kde 4.6.2 y sin problemas luego un downgrade a squeeze y punto. Pero hablas de un server. hay que tener mucho cuidado. Pero si es apache, mysql no deberías tener problemas. Si tienes autentificación con ldap tiene mas miga. Y tal vez tengas que reescribir algun script Tendrás que reconfigurar algun servicio el salto de dos distros es grande. Y hay cosas que han cambiado como ldap por ejemplo. Y udev, etc, etc. Pero no te olvides de hacer un backup de todos los datos, antes por si acaso 8=} murphy es un cabrón ya sabes si puede ir mal irá mal Y si sale mal, haces una instalación limpia de squeeze bonita aventura. un Saludo BasaBuru Yo no recomendaría un salto como ese, saltándose una versión :-/ Hay demasiadas diferencias como para intentarlo de un paso, además creo recordar que de lenny a squeeze el paso es: apt-get update y juego apt-get upgrade antes del dist-upgrade, pero no me hagas mucho caso, lee el manual. En tu caso yo me decantaría por una instalación limpia de todo y luego migrar los datos. Saludos. -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/BANLkTikGz2¶g_bqrdnhkauqu8rt+s...@mail.gmail.com
Re: experiencias con upgrade de etch a Lenny
El 27/04/2011 3:33, Alvaro Flores escribió: Estimados, Necesito upgradear un servidor con debian etch a lenny (o squeeze da igual), ya que ni repositorio encuentro para esta distro... El servidor tiene una intranet montada con apache, base de datos en mysql y varios escripts en perl... el tema es que me da miedo hacer el upgrade de esta guia ( http://www.cyberciti.biz/tips/howto-upgrade-debian-linux-4etch-to-5lenny-server.html ), quedará algo jodido o lo puedo hacer confiado ? ¿Alguna experiencia personal y sus respectivos peros o cuidados a tener con respecto a los upgrades de distros? Saludos, Álvaro. Yo hice una actualización de etch a lenny en un server con samba, hylafax, dhcpserver y poco más y fue muy bien, algunos problemillas con hylafax y poco más. En mi server casero también la hice sin problema, en esta actualmente lo migre a squeeze y si me dio bastante más trabajo, por lo que mi recomendación es que pases a lenny, si con el te funciona todo y tienes tiempo después pasar a squeeze. Si la máquina es crítica yo nunca me saltaría una versión. Un saludo. -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4db7f91c.5080...@yahoo.es
Re: experiencias con upgrade de etch a Lenny
El Tue, 26 Apr 2011 22:33:44 -0300, Alvaro Flores escribió: Necesito upgradear un servidor con debian etch a lenny (o squeeze da igual), ya que ni repositorio encuentro para esta distro... El servidor tiene una intranet montada con apache, base de datos en mysql y varios escripts en perl... el tema es que me da miedo hacer el upgrade de esta guia ( http://www.cyberciti.biz/tips/howto-upgrade-debian-linux-4etch- to-5lenny-server.html ), quedará algo jodido o lo puedo hacer confiado ? ¿Alguna experiencia personal y sus respectivos peros o cuidados a tener con respecto a los upgrades de distros? Yo te recomendaría que leyeras la guía de actualización oficial (Notas de la versión), sobre todo el apartado 4. Actualizaciones desde versiones anteriores: http://www.debian.org/releases/lenny/i386/release-notes/index.es.html Ya sabes que oficialmente sólo está soportado actualizar desde una versión a otra (p. ej., etch → lenny). Saludos, -- Camaleón -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/pan.2011.04.27.12.07...@gmail.com
Re: experiencias con upgrade de etch a Lenny
Yo no recomendaría un salto como ese, saltándose una versión :-/ Hay demasiadas diferencias como para intentarlo de un paso, además creo recordar que de lenny a squeeze el paso es: apt-get update y juego apt-get upgrade antes del dist-upgrade, pero no me hagas mucho caso, lee el manual. No he sabido de alguien que tenga problemas de actualización al saltarse una versión que este entremedio, es decir, si me paso de etch a equeeze en vez de hacerlo a lenny primero, creo que si te pasas de etch a equeeze no debieras presentar problema más que los que otros ya te han mencionado y que son solucionables. Además tampoco tiene mucho sentido hacer un apt-get upgrade antes de un apt-get dist-upgrade si en la migración de debian no te piden versiones especificas de algun paquete, ¿o si?. Por lo menos es lo que yo entiendo. En tu caso yo me decantaría por una instalación limpia de todo y luego migrar los datos. Saludos. Saludos Cordiales -- Roberto Quiñones Owner - Service Manager and System ACShell.NET – Internet Services robe...@acshell.net - www.acshell.net San Martin #311 Santiago – CL (Chile) +560981361713 -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/banlktimohbekcvsav_8yqqengou-t88...@mail.gmail.com
Re: experiencias con upgrade de etch a Lenny
El día 27 de abril de 2011 14:42, Roberto Quiñones robe...@acshell.net escribió: Yo no recomendaría un salto como ese, saltándose una versión :-/ Hay demasiadas diferencias como para intentarlo de un paso, además creo recordar que de lenny a squeeze el paso es: apt-get update y juego apt-get upgrade antes del dist-upgrade, pero no me hagas mucho caso, lee el manual. No he sabido de alguien que tenga problemas de actualización al saltarse una versión que este entremedio, es decir, si me paso de etch a equeeze en vez de hacerlo a lenny primero, creo que si te pasas de etch a equeeze no debieras presentar problema más que los que otros ya te han mencionado y que son solucionables. Además tampoco tiene mucho sentido hacer un apt-get upgrade antes de un apt-get dist-upgrade si en la migración de debian no te piden versiones especificas de algun paquete, ¿o si?. Por lo menos es lo que yo entiendo. En tu caso yo me decantaría por una instalación limpia de todo y luego migrar los datos. Saludos. Saludos Cordiales -- No se tu, pero a mi, incluso en las migraciones estándar encuentro algunos problemas... El manual (bastante largo por cierto... por algo será :-) ) aconseja: 4.4.4. Minimal system upgrade In some cases, doing the full upgrade (as described below) directly might remove large numbers of packages that you will want to keep. We therefore recommend a two-part upgrade process, first a minimal upgrade to overcome these conflicts, then a full upgrade as described in Section 4.4.6, “Upgrading the system”. No quiero imaginar los dolores de cabeza que pueda dar una migración saltando una versión (Como ves hablo por hablar, porque nunca lo he hecho...) Saludos. -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/banlktikz8u89kxafv7dwhzyos7r+0ru...@mail.gmail.com
Re: experiencias con upgrade de etch a Lenny
-- No se tu, pero a mi, incluso en las migraciones estándar encuentro algunos problemas... Pero yo no dije que no se encontraria con problema, yo dije que como otros ya mencionaron, podria tener problemas que son solucionables como en cualquier migración de version de debian independiente si te saltas de versiones entre medio. El manual (bastante largo por cierto... por algo será :-) ) aconseja: 4.4.4. Minimal system upgrade In some cases, doing the full upgrade (as described below) directly might remove large numbers of packages that you will want to keep. We therefore recommend a two-part upgrade process, first a minimal upgrade to overcome these conflicts, then a full upgrade as described in Section 4.4.6, “Upgrading the system”. Eso esta bien y no lo contradigo es más es una manera correcta de hacerlo si quieres mantener paquetes y no quieres perderlos, pero tampoco te dice que no tendras problemas de otra indole en la migración si lo hace indistintamente como lo dice, puesto que ahi lo que menciona es que si no quieres perder paquetes debes hacerlo de tal manera. Por lo menos es lo que entiendo del texto. No quiero imaginar los dolores de cabeza que pueda dar una migración saltando una versión (Como ves hablo por hablar, porque nunca lo he hecho...) Saludos. Mismos dolores pero distintos a los que podes tener con una migración de versión respetando la modalidad que sigue a cada versión. Saludos Cordiales -- Roberto Quiñones Owner - Service Manager and System ACShell.NET – Internet Services robe...@acshell.net - www.acshell.net San Martin #311 Santiago – CL (Chile) +560981361713 -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/banlktimnettfad2ykuejevvy-fn9cee...@mail.gmail.com
Fwd: experiencias con upgrade de etch a Lenny
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Inicio del mensaje reenviado: De: Juan Manuel Acuña Barrera gps...@gmail.com Fecha: 27 de abril de 2011 18:19:55 CDT Para: Roberto Quiñones robe...@acshell.net Asunto: Re: experiencias con upgrade de etch a Lenny -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 El 27/04/2011, a las 09:09, Roberto Quiñones escribió: -- No se tu, pero a mi, incluso en las migraciones estándar encuentro algunos problemas... Pero yo no dije que no se encontraria con problema, yo dije que como otros ya mencionaron, podria tener problemas que son solucionables como en cualquier migración de version de debian independiente si te saltas de versiones entre medio. El manual (bastante largo por cierto... por algo será :-) ) aconseja: 4.4.4. Minimal system upgrade In some cases, doing the full upgrade (as described below) directly might remove large numbers of packages that you will want to keep. We therefore recommend a two-part upgrade process, first a minimal upgrade to overcome these conflicts, then a full upgrade as described in Section 4.4.6, “Upgrading the system”. Eso esta bien y no lo contradigo es más es una manera correcta de hacerlo si quieres mantener paquetes y no quieres perderlos, pero tampoco te dice que no tendras problemas de otra indole en la migración si lo hace indistintamente como lo dice, puesto que ahi lo que menciona es que si no quieres perder paquetes debes hacerlo de tal manera. Por lo menos es lo que entiendo del texto. No quiero imaginar los dolores de cabeza que pueda dar una migración saltando una versión (Como ves hablo por hablar, porque nunca lo he hecho...) Saludos. Mismos dolores pero distintos a los que podes tener con una migración de versión respetando la modalidad que sigue a cada versión. Saludos Cordiales -- Roberto Quiñones Owner - Service Manager and System ACShell.NET – Internet Services robe...@acshell.net - www.acshell.net San Martin #311 Santiago – CL (Chile) +560981361713 -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/banlktimnettfad2ykuejevvy-fn9cee...@mail.gmail.com Personalmente yo iría de etch a lenny y luego de lenny a squeeze. En cuanto a recomendaciones, respalda todo /etc/, respalda tus scripts de perl y tu /var/lib/mysql que es donde tienes lo de mysql, además de tu carpeta personal. En cuanto al método coincido completamente con BasaBuru, usa apt-get, _no_ uses aptitude, a mi ya me ha dado algún susto el aptitude en los upgrades, y apt-get va como seda. Suerte! -BEGIN PGP SIGNATURE- Version: GnuPG/MacGPG2 v2.0.14 (Darwin) iEYEARECAAYFAk24pKIACgkQTc4QiYN6hDe/+QCfWw2l+UqfxXeb7SmDMAyZqyEQ +NMAoIYTVU+7LUU78jl9sUkpBzF+fCgk =tfhc -END PGP SIGNATURE- Una disculpa Roberto, por error se me fue a tu correo personal en lugar de ir a la lista. Suerte! -BEGIN PGP SIGNATURE- Version: GnuPG/MacGPG2 v2.0.14 (Darwin) iEYEARECAAYFAk24pP4ACgkQTc4QiYN6hDcYxACfa61HuuFvAMdNlg16JXz+B7Y7 5HYAnjzQZld0IJRDX8DGJWPU6pYBRlVa =ZZte -END PGP SIGNATURE- -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/c53472e7-b821-423a-a1ac-3e2449b98...@gmail.com
experiencias con upgrade de etch a Lenny
Estimados, Necesito upgradear un servidor con debian etch a lenny (o squeeze da igual), ya que ni repositorio encuentro para esta distro... El servidor tiene una intranet montada con apache, base de datos en mysql y varios escripts en perl... el tema es que me da miedo hacer el upgrade de esta guia ( http://www.cyberciti.biz/tips/howto-upgrade-debian-linux-4etch-to-5lenny-server.html ), quedará algo jodido o lo puedo hacer confiado ? ¿Alguna experiencia personal y sus respectivos peros o cuidados a tener con respecto a los upgrades de distros? Saludos, Álvaro. -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4db77278.2050...@gmail.com
Installing Etch
I need to install Etch (or Etch-and-a-half). I have CD 1. In order to install a fully working Etch I need more than that. So, how can I get: a full set of DVDs, a full set of CDs (ouch) or a working sources list? I have googled, but can get nothing about installing Etch, now it is already off the cliff. I try to time limit, but Google brings up things, that it claims were posted only 3 days ago, that talk about the change from Sarge to Etch. :-/ I did myself ask a related question on this list a while ago, but I can't find that either. My Google-foo has clearly gone AWOL. So, again: how can I get one or all of: a full set of DVDs, a full set of CDs, or a funtioning sources.list? Lisi -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/201103281228.55756.lisi.re...@gmail.com
Re: Installing Etch
Hi, here is repository: deb http://http.us.debian.org/debian etch main contrib non-free I guess, if you have CD1 this will be enough, just install it and then extend with above repository. Regards --- Roman On Mon, Mar 28, 2011 at 3:28 PM, Lisi lisi.re...@gmail.com wrote: I need to install Etch (or Etch-and-a-half). I have CD 1. In order to install a fully working Etch I need more than that. So, how can I get: a full set of DVDs, a full set of CDs (ouch) or a working sources list? I have googled, but can get nothing about installing Etch, now it is already off the cliff. I try to time limit, but Google brings up things, that it claims were posted only 3 days ago, that talk about the change from Sarge to Etch. :-/ I did myself ask a related question on this list a while ago, but I can't find that either. My Google-foo has clearly gone AWOL. So, again: how can I get one or all of: a full set of DVDs, a full set of CDs, or a funtioning sources.list? Lisi -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/201103281228.55756.lisi.re...@gmail.com
Re: Installing Etch
On Monday 28 March 2011 12:37:41 Roman Khomasuridze wrote: On Mon, Mar 28, 2011 at 3:28 PM, Lisi lisi.re...@gmail.com wrote: I need to install Etch (or Etch-and-a-half). I have CD 1. In order to install a fully working Etch I need more than that. So, how can I get: a full set of DVDs, a full set of CDs (ouch) or a working sources list? here is repository: deb http://http.us.debian.org/debian etch main contrib non-free I guess, if you have CD1 this will be enough, just install it and then extend with above repository. Many thanks, Roman! Just what I needed. :-)) I did not expect it to be that simple!! (My own one attempt to install was frankly a mess!) Lisi -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/201103281241.55213.lisi.re...@gmail.com
Re: Installing Etch
you're welcome! Yeah, but haven't found CD-s archive, just for curiosity, where they might be?... hmm. Regards Roman On Mon, Mar 28, 2011 at 3:41 PM, Lisi lisi.re...@gmail.com wrote: On Monday 28 March 2011 12:37:41 Roman Khomasuridze wrote: On Mon, Mar 28, 2011 at 3:28 PM, Lisi lisi.re...@gmail.com wrote: I need to install Etch (or Etch-and-a-half). I have CD 1. In order to install a fully working Etch I need more than that. So, how can I get: a full set of DVDs, a full set of CDs (ouch) or a working sources list? here is repository: deb http://http.us.debian.org/debian etch main contrib non-free I guess, if you have CD1 this will be enough, just install it and then extend with above repository. Many thanks, Roman! Just what I needed. :-)) I did not expect it to be that simple!! (My own one attempt to install was frankly a mess!) Lisi -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/201103281241.55213.lisi.re...@gmail.com
Re: Installing Etch
ahaa, found it: http://www.debian.org/releases/etch/debian-installer/ On Mon, Mar 28, 2011 at 3:44 PM, Roman Khomasuridze khomasuri...@gmail.comwrote: you're welcome! Yeah, but haven't found CD-s archive, just for curiosity, where they might be?... hmm. Regards Roman On Mon, Mar 28, 2011 at 3:41 PM, Lisi lisi.re...@gmail.com wrote: On Monday 28 March 2011 12:37:41 Roman Khomasuridze wrote: On Mon, Mar 28, 2011 at 3:28 PM, Lisi lisi.re...@gmail.com wrote: I need to install Etch (or Etch-and-a-half). I have CD 1. In order to install a fully working Etch I need more than that. So, how can I get: a full set of DVDs, a full set of CDs (ouch) or a working sources list? here is repository: deb http://http.us.debian.org/debian etch main contrib non-free I guess, if you have CD1 this will be enough, just install it and then extend with above repository. Many thanks, Roman! Just what I needed. :-)) I did not expect it to be that simple!! (My own one attempt to install was frankly a mess!) Lisi -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/201103281241.55213.lisi.re...@gmail.com
Re: Installing Etch
Roman wrote: you're welcome! Yeah, but haven't found CD-s archive, just for curiosity, where they might be?... hmm. http://www.debian.org/CD/faq/#old points at http://cdimage.debian.org/cdimage/archive/ -- Steve McIntyre, Cambridge, UK.st...@einval.com There's no sensation to compare with this Suspended animation, A state of bliss -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/e1q4crg-0004ev...@jack.mossbank.org.uk
Re: Installing Etch
On Monday 28 March 2011 12:37:41 Roman Khomasuridze wrote: Hi, here is repository: deb http://http.us.debian.org/debian etch main contrib non-free I guess, if you have CD1 this will be enough, just install it and then extend with above repository. That repository appears to be non-existent. I couldn't even ping it. :-( I tried a fair number of other repositories. They existed, but said that the requested files didn't. Plan B (the DVDs). Lisi -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/201103281511.37331.lisi.re...@gmail.com
Re: Installing Etch
On Lu, 28 mar 11, 15:11:37, Lisi wrote: On Monday 28 March 2011 12:37:41 Roman Khomasuridze wrote: Hi, here is repository: deb http://http.us.debian.org/debian etch main contrib non-free That's not going to work, since etch is archived. I guess, if you have CD1 this will be enough, just install it and then extend with above repository. That repository appears to be non-existent. I couldn't even ping it. :-( I tried a fair number of other repositories. They existed, but said that the requested files didn't. Plan B (the DVDs). Lisi, you need archive.debian.org. Not sure exactly how the sources.list line should look like though, but it shouldn't be hard to figure out. Regards, Andrei -- Offtopic discussions among Debian users and developers: http://lists.alioth.debian.org/mailman/listinfo/d-community-offtopic signature.asc Description: Digital signature
Re: Installing Etch
On 2011-03-28 09:18:31 Andrei Popescu wrote: On Lu, 28 mar 11, 15:11:37, Lisi wrote: On Monday 28 March 2011 12:37:41 Roman Khomasuridze wrote: deb http://http.us.debian.org/debian etch main contrib non-free That repository appears to be non-existent. I couldn't even ping it. :-( I tried a fair number of other repositories. They existed, but said that the requested files didn't. Plan B (the DVDs). Lisi, you need archive.debian.org. Not sure exactly how the sources.list line should look like though, but it shouldn't be hard to figure out. For Free Software: deb http://archive.debian.org/debian etch main For Sources deb-src http://archive.debian.org/debian etch main Getting contrib, non-free, and their corresponding sources is left as an exercise for the reader. Note that Etch has a number of known, unpatched security vulnerabilities and receives no real support from the Debian project. Moving to Lenny should be made a priority; any time spend working with Etch should be (at least) matched with the same amount of time pursuing an upgrade to Lenny. (Even Lenny is oldstable, but at least you should get 10+ months of security support on that and it's the first step in upgrading to Squeeze anyway.) -- Boyd Stephen Smith Jr. ,= ,-_-. =. b...@iguanasuicide.net ((_/)o o(\_)) ICQ: 514984 YM/AIM: DaTwinkDaddy `-'(. .)`-' http://iguanasuicide.net/\_/ signature.asc Description: This is a digitally signed message part.
Thanks! was Re: Installing Etch
On Monday 28 March 2011 16:20:18 Boyd Stephen Smith Jr. wrote: Note that Etch has a number of known, unpatched security vulnerabilities and receives no real support from the Debian project. Moving to Lenny should be made a priority; any time spend working with Etch should be (at least) matched with the same amount of time pursuing an upgrade to Lenny. Thanks for the warning, Boyd. But this is for an assessment question in a course I am doing, not for a machine in use. The questions centre on X and Etch, and given how much methods of dealing with X have changed between Etch and Squeeze, I thought that it might be nice to do at least some of it on the right version. Then I got pig-headed when I was failing. I can be quite stubborn about not giving up. Using the DVDs would presumably also work. Thanks all of you for all the help. Lisi -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/201103281715.24278.lisi.re...@gmail.com
Migrate debian etch to virtual machine (vmware)
Hi People Physically I'm running a debian server 4 for the e-mail, but I'm having problems to use the tool to perform VM virtualization. I wonder if there is another way to virtualize this machine, do some kind of backup so you can import it in vmware. Does anyone have any tips that might help? -- Márcio Luciano Donada Aurora Alimentos - T.I. Matriz Coop. Central Oeste Catarinense