RE: [Declude.JunkMail] Address Book Only in Declude?
Tom et al, I really like this approach on the rules.ima. Also been trying to spec out a way to give the end user some control over some simple Spam management. It would be great if a host administrator (and even the end user) could determine which Declude Spam tests we make available from a list they would like to use, as well as the ability to add/edit/delete their own Declude Kill list addresses. However, requires unique global.cfg for each which is not currently possible and sure there are a lot of issues involving same to to this. But it sure would be nice! Don S. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of Tom Baker | Netsmith Inc Sent: Thursday, August 29, 2002 12:36 PM To: '[EMAIL PROTECTED]' Subject: RE: [Declude.JunkMail] Address Book Only in Declude? The same obstacle I have not quite overcome as of yet. We use a size restriction to keep mailbox's from filling up the entire mail server HD (10MB per user). And to ensure their SPAM box does not stop incoming mail if the user is not erasing it we have this little disclaimer... Note: All mailbox's have a 10 megabyte limit, and due to restrictions of our mail server we cannot automatically purge SPAM after a certain amount of time, to ensure your SPAM folder does not fill up your mailbox, if your SPAM folder ever reaches 3 megabytes, it will automatically be completely erased. And to enforce it, I run a nightly search on the entire mail dir D:\mail\*\spam.mbx (recursive serch) Where size > 3084kb And erase any spam.mbx's that I find I'm working on a more creative solution. -Original Message- From: Charles Frolick [mailto:[EMAIL PROTECTED]] Sent: Thursday, August 29, 2002 11:22 AM To: [EMAIL PROTECTED] Subject: RE: [Declude.JunkMail] Address Book Only in Declude? I do have one question, how do you manage the size of the spam folder when they use that option? I would love to use the MAILBOX action, but have no way of cleaning out the spam folder without affecting the other folders, including inbox, as well. We currently do not use aging as a restriction for those who use webmail exclusively, we opted for size limits instead. Chuck Frolick ArgoNet, Inc. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Tom Baker | Netsmith Inc Sent: Thursday, August 29, 2002 11:09 AM To: '[EMAIL PROTECTED]' Subject: RE: [Declude.JunkMail] Address Book Only in Declude? Ok, I will stop posting on this thread after this. For a working-example on how I have achieved this with imail and cold fusion I have setup a test account. Login = [EMAIL PROTECTED] Pass = declude Manager: http://users.bsc.net/ WebMail: http://mail.bsc.net/ >From the manager you can *import* an Outlook Express address book, Or build your own, you can adjust the filter levels, and block individual users. These features just manage the rules.ima, which you can watch by going to the web-mail Interface and clicking "Change Processing Rules" Anyone on this list is welcome to upload dummy address book's and play with this account I just wanted to demonstrate to others how I have creatively achieved this with IMAIL 6 / Cold Fusion. * note: I built this interface before I became aware of the power of WEIGHT, changing the filter-definitions to work with weights instead of individual headers is on my to-do list, so if anyone actually does look at this please don't flame me on how I could improve that. I am already aware :) -Original Message- From: Tom Baker|Netsmith Inc [mailto:[EMAIL PROTECTED]] Sent: Thursday, August 29, 2002 10:44 AM To: '[EMAIL PROTECTED]' Subject: RE: [Declude.JunkMail] Address Book Only in Declude? Excuse the typo everyone, I meant to put a "not (!)" in that long string H!~THIS... -Original Message- From: Tom Baker|Netsmith Inc [mailto:[EMAIL PROTECTED]] Sent: Thursday, August 29, 2002 10:41 AM To: '[EMAIL PROTECTED]' Subject: RE: [Declude.JunkMail] Address Book Only in Declude? Oh, for an "address book only" You must also add one last entry at the bottom of rules.ima H~THISWILLNEVERMATCHBECAUSEITSAREALLYLONGBOGUSSSTRING:NUL That will force anything not matched in the above of rules.ima to be deleted Ex: --rules.ima-- H~[EMAIL PROTECTED]:main F~declude.com:main F~[EMAIL PROTECTED]:main H~THISWILLNEVERMATCHBECAUSEITSAREALLYLONGBOGUSSSTRING:NUL --/rules.ima-- Anything that does not match the first 3 lines will be deleted -Original Message- From: Tom Baker|Netsmith Inc [mailto:[EMAIL PROTECTED]] Sent: Thursday, August 29, 2002 10:38 AM To: '[EMAIL PROTECTED]' Subject: RE: [Declude.JunkMail] Address Book Only in Declude? Yes, this is how I already accomplished this for my users. I have a cold fusion interface which verified login/password, then manages their rules.ima Anyone they want to "allow" it
Re: [Declude.JunkMail] Address Book Only in Declude?
Ya, that is an issue. We are currently working on a solution that will do two things... 1) run clean up code each time the user logs out of webmail, which trims the size of the spam mailbox if it is greater than a certain size. 2) an automated script that checks for spam mailboxes that have exceeded a certain size, since not all users user webmail. We don't use Imail's webmail, we have custom code running on a bunch of Linux boxes which allows us to do things like #1 more easily. Bill -Original Message- From: "Charles Frolick" Sent: Thu, 29 Aug 2002 11:21:30 -0500 Subject: RE: [Declude.JunkMail] Address Book Only in Declude? I do have one question, how do you manage the size of the spam folder when they use that option? I would love to use the MAILBOX action, but have no way of cleaning out the spam folder without affecting the other folders, including inbox, as well. We currently do not use aging as a restriction for those who use webmail exclusively, we opted for size limits instead. Chuck Frolick ArgoNet, Inc. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Tom Baker | Netsmith Inc Sent: Thursday, August 29, 2002 11:09 AM To: '[EMAIL PROTECTED]' Subject: RE: [Declude.JunkMail] Address Book Only in Declude? Ok, I will stop posting on this thread after this. For a working-example on how I have achieved this with imail and cold fusion I have setup a test account. Login = [EMAIL PROTECTED] Pass = declude Manager: http://users.bsc.net/ WebMail: http://mail.bsc.net/ >From the manager you can *import* an Outlook Express address book, Or build your own, you can adjust the filter levels, and block individual users. These features just manage the rules.ima, which you can watch by going to the web-mail Interface and clicking "Change Processing Rules" Anyone on this list is welcome to upload dummy address book's and play with this account I just wanted to demonstrate to others how I have creatively achieved this with IMAIL 6 / Cold Fusion. * note: I built this interface before I became aware of the power of WEIGHT, changing the filter-definitions to work with weights instead of individual headers is on my to-do list, so if anyone actually does look at this please don't flame me on how I could improve that. I am already aware :) -Original Message- From: Tom Baker|Netsmith Inc [mailto:[EMAIL PROTECTED]] Sent: Thursday, August 29, 2002 10:44 AM To: '[EMAIL PROTECTED]' Subject: RE: [Declude.JunkMail] Address Book Only in Declude? Excuse the typo everyone, I meant to put a "not (!)" in that long string H!~THIS... -Original Message- From: Tom Baker|Netsmith Inc [mailto:[EMAIL PROTECTED]] Sent: Thursday, August 29, 2002 10:41 AM To: '[EMAIL PROTECTED]' Subject: RE: [Declude.JunkMail] Address Book Only in Declude? Oh, for an "address book only" You must also add one last entry at the bottom of rules.ima H~THISWILLNEVERMATCHBECAUSEITSAREALLYLONGBOGUSSSTRING:NUL That will force anything not matched in the above of rules.ima to be deleted Ex: --rules.ima-- H~[EMAIL PROTECTED]:main F~declude.com:main F~[EMAIL PROTECTED]:main H~THISWILLNEVERMATCHBECAUSEITSAREALLYLONGBOGUSSSTRING:NUL --/rules.ima-- Anything that does not match the first 3 lines will be deleted -Original Message- From: Tom Baker|Netsmith Inc [mailto:[EMAIL PROTECTED]] Sent: Thursday, August 29, 2002 10:38 AM To: '[EMAIL PROTECTED]' Subject: RE: [Declude.JunkMail] Address Book Only in Declude? Yes, this is how I already accomplished this for my users. I have a cold fusion interface which verified login/password, then manages their rules.ima Anyone they want to "allow" it writes at the top of the rules.ima... F~[EMAIL PROTECTED]:MAIN Any junk-mail they want to block it sends to SPAM folder H~X-RBL-WARNING:SPAM The "problem" with authorization is that IMAIL passwords are stored in registry, so you have to make your script verify their password via POP3, or use the IMAIL/REG password Decryption routine that I wrote. Could easily be replicated in .asp as well -Original Message- From: John Tolmachoff [mailto:[EMAIL PROTECTED]] Sent: Thursday, August 29, 2002 9:53 AM To: [EMAIL PROTECTED] Subject: RE: [Declude.JunkMail] Address Book Only in Declude? Not to be sarcastic, but wouldn't that be done in a rules.ima file that is configurable by the user? John Tolmachoff IT Manager, Network Engineer RelianceSoft, Inc. Fullerton, CA 92835 www.reliancesoft.com -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of Roger Heath Sent: Thursday, August 29, 2002 7:32 AM To: R. Scott Perry Subject: [Declude.JunkMail] Address Book Only in Declude? I just got the following request from one of my users: R> How do I arrange to receive only emails from members of my addr
RE: [Declude.JunkMail] Address Book Only in Declude?
The same obstacle I have not quite overcome as of yet. We use a size restriction to keep mailbox's from filling up the entire mail server HD (10MB per user). And to ensure their SPAM box does not stop incoming mail if the user is not erasing it we have this little disclaimer... Note: All mailbox's have a 10 megabyte limit, and due to restrictions of our mail server we cannot automatically purge SPAM after a certain amount of time, to ensure your SPAM folder does not fill up your mailbox, if your SPAM folder ever reaches 3 megabytes, it will automatically be completely erased. And to enforce it, I run a nightly search on the entire mail dir D:\mail\*\spam.mbx (recursive serch) Where size > 3084kb And erase any spam.mbx's that I find I'm working on a more creative solution. -Original Message- From: Charles Frolick [mailto:[EMAIL PROTECTED]] Sent: Thursday, August 29, 2002 11:22 AM To: [EMAIL PROTECTED] Subject: RE: [Declude.JunkMail] Address Book Only in Declude? I do have one question, how do you manage the size of the spam folder when they use that option? I would love to use the MAILBOX action, but have no way of cleaning out the spam folder without affecting the other folders, including inbox, as well. We currently do not use aging as a restriction for those who use webmail exclusively, we opted for size limits instead. Chuck Frolick ArgoNet, Inc. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Tom Baker | Netsmith Inc Sent: Thursday, August 29, 2002 11:09 AM To: '[EMAIL PROTECTED]' Subject: RE: [Declude.JunkMail] Address Book Only in Declude? Ok, I will stop posting on this thread after this. For a working-example on how I have achieved this with imail and cold fusion I have setup a test account. Login = [EMAIL PROTECTED] Pass = declude Manager: http://users.bsc.net/ WebMail: http://mail.bsc.net/ >From the manager you can *import* an Outlook Express address book, Or build your own, you can adjust the filter levels, and block individual users. These features just manage the rules.ima, which you can watch by going to the web-mail Interface and clicking "Change Processing Rules" Anyone on this list is welcome to upload dummy address book's and play with this account I just wanted to demonstrate to others how I have creatively achieved this with IMAIL 6 / Cold Fusion. * note: I built this interface before I became aware of the power of WEIGHT, changing the filter-definitions to work with weights instead of individual headers is on my to-do list, so if anyone actually does look at this please don't flame me on how I could improve that. I am already aware :) -Original Message- From: Tom Baker|Netsmith Inc [mailto:[EMAIL PROTECTED]] Sent: Thursday, August 29, 2002 10:44 AM To: '[EMAIL PROTECTED]' Subject: RE: [Declude.JunkMail] Address Book Only in Declude? Excuse the typo everyone, I meant to put a "not (!)" in that long string H!~THIS... -Original Message- From: Tom Baker|Netsmith Inc [mailto:[EMAIL PROTECTED]] Sent: Thursday, August 29, 2002 10:41 AM To: '[EMAIL PROTECTED]' Subject: RE: [Declude.JunkMail] Address Book Only in Declude? Oh, for an "address book only" You must also add one last entry at the bottom of rules.ima H~THISWILLNEVERMATCHBECAUSEITSAREALLYLONGBOGUSSSTRING:NUL That will force anything not matched in the above of rules.ima to be deleted Ex: --rules.ima-- H~[EMAIL PROTECTED]:main F~declude.com:main F~[EMAIL PROTECTED]:main H~THISWILLNEVERMATCHBECAUSEITSAREALLYLONGBOGUSSSTRING:NUL --/rules.ima-- Anything that does not match the first 3 lines will be deleted -Original Message- From: Tom Baker|Netsmith Inc [mailto:[EMAIL PROTECTED]] Sent: Thursday, August 29, 2002 10:38 AM To: '[EMAIL PROTECTED]' Subject: RE: [Declude.JunkMail] Address Book Only in Declude? Yes, this is how I already accomplished this for my users. I have a cold fusion interface which verified login/password, then manages their rules.ima Anyone they want to "allow" it writes at the top of the rules.ima... F~[EMAIL PROTECTED]:MAIN Any junk-mail they want to block it sends to SPAM folder H~X-RBL-WARNING:SPAM The "problem" with authorization is that IMAIL passwords are stored in registry, so you have to make your script verify their password via POP3, or use the IMAIL/REG password Decryption routine that I wrote. Could easily be replicated in .asp as well -Original Message- From: John Tolmachoff [mailto:[EMAIL PROTECTED]] Sent: Thursday, August 29, 2002 9:53 AM To: [EMAIL PROTECTED] Subject: RE: [Declude.JunkMail] Address Book Only in Declude? Not to be sarcastic, but wouldn't that be done in a rules.ima file that is configurable by the user? John Tolmachoff IT Manager, Network Engineer RelianceSoft, Inc. Fullerton, CA 92835 www.reliancesoft.com -
RE: [Declude.JunkMail] Address Book Only in Declude?
I do have one question, how do you manage the size of the spam folder when they use that option? I would love to use the MAILBOX action, but have no way of cleaning out the spam folder without affecting the other folders, including inbox, as well. We currently do not use aging as a restriction for those who use webmail exclusively, we opted for size limits instead. Chuck Frolick ArgoNet, Inc. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Tom Baker | Netsmith Inc Sent: Thursday, August 29, 2002 11:09 AM To: '[EMAIL PROTECTED]' Subject: RE: [Declude.JunkMail] Address Book Only in Declude? Ok, I will stop posting on this thread after this. For a working-example on how I have achieved this with imail and cold fusion I have setup a test account. Login = [EMAIL PROTECTED] Pass = declude Manager: http://users.bsc.net/ WebMail: http://mail.bsc.net/ >From the manager you can *import* an Outlook Express address book, Or build your own, you can adjust the filter levels, and block individual users. These features just manage the rules.ima, which you can watch by going to the web-mail Interface and clicking "Change Processing Rules" Anyone on this list is welcome to upload dummy address book's and play with this account I just wanted to demonstrate to others how I have creatively achieved this with IMAIL 6 / Cold Fusion. * note: I built this interface before I became aware of the power of WEIGHT, changing the filter-definitions to work with weights instead of individual headers is on my to-do list, so if anyone actually does look at this please don't flame me on how I could improve that. I am already aware :) -Original Message- From: Tom Baker|Netsmith Inc [mailto:[EMAIL PROTECTED]] Sent: Thursday, August 29, 2002 10:44 AM To: '[EMAIL PROTECTED]' Subject: RE: [Declude.JunkMail] Address Book Only in Declude? Excuse the typo everyone, I meant to put a "not (!)" in that long string H!~THIS... -Original Message- From: Tom Baker|Netsmith Inc [mailto:[EMAIL PROTECTED]] Sent: Thursday, August 29, 2002 10:41 AM To: '[EMAIL PROTECTED]' Subject: RE: [Declude.JunkMail] Address Book Only in Declude? Oh, for an "address book only" You must also add one last entry at the bottom of rules.ima H~THISWILLNEVERMATCHBECAUSEITSAREALLYLONGBOGUSSSTRING:NUL That will force anything not matched in the above of rules.ima to be deleted Ex: --rules.ima-- H~[EMAIL PROTECTED]:main F~declude.com:main F~[EMAIL PROTECTED]:main H~THISWILLNEVERMATCHBECAUSEITSAREALLYLONGBOGUSSSTRING:NUL --/rules.ima-- Anything that does not match the first 3 lines will be deleted -Original Message- From: Tom Baker|Netsmith Inc [mailto:[EMAIL PROTECTED]] Sent: Thursday, August 29, 2002 10:38 AM To: '[EMAIL PROTECTED]' Subject: RE: [Declude.JunkMail] Address Book Only in Declude? Yes, this is how I already accomplished this for my users. I have a cold fusion interface which verified login/password, then manages their rules.ima Anyone they want to "allow" it writes at the top of the rules.ima... F~[EMAIL PROTECTED]:MAIN Any junk-mail they want to block it sends to SPAM folder H~X-RBL-WARNING:SPAM The "problem" with authorization is that IMAIL passwords are stored in registry, so you have to make your script verify their password via POP3, or use the IMAIL/REG password Decryption routine that I wrote. Could easily be replicated in .asp as well -Original Message- From: John Tolmachoff [mailto:[EMAIL PROTECTED]] Sent: Thursday, August 29, 2002 9:53 AM To: [EMAIL PROTECTED] Subject: RE: [Declude.JunkMail] Address Book Only in Declude? Not to be sarcastic, but wouldn't that be done in a rules.ima file that is configurable by the user? John Tolmachoff IT Manager, Network Engineer RelianceSoft, Inc. Fullerton, CA 92835 www.reliancesoft.com -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of Roger Heath Sent: Thursday, August 29, 2002 7:32 AM To: R. Scott Perry Subject: [Declude.JunkMail] Address Book Only in Declude? I just got the following request from one of my users: R> How do I arrange to receive only emails from members of my address book? In my opinion this could be the biggest feature added to Declude at this time. Here's how I'd like it to work: Declude looks at a text cfg file to see if this feature is turned on for a select domain or e-mail account... for example, if in ADDR.CFG email address or domain wyndows.com or [EMAIL PROTECTED] then Look at c:\Imail\Wyndows\users\heath\aliases.txt MAILFROM exists then pass the e-mail to this account, else delete...or return e-mail as rejected.. How soon can I get this, Scott? -- Roger Heath [EMAIL PROTECTED] www.rleeheath.com -- ActivatorMail(tm) ver.082302 Scanned for all viruses by www.activatormail.com in
RE: [Declude.JunkMail] Address Book Only in Declude?
Ok, I will stop posting on this thread after this. For a working-example on how I have achieved this with imail and cold fusion I have setup a test account. Login = [EMAIL PROTECTED] Pass = declude Manager: http://users.bsc.net/ WebMail: http://mail.bsc.net/ >From the manager you can *import* an Outlook Express address book, Or build your own, you can adjust the filter levels, and block individual users. These features just manage the rules.ima, which you can watch by going to the web-mail Interface and clicking "Change Processing Rules" Anyone on this list is welcome to upload dummy address book's and play with this account I just wanted to demonstrate to others how I have creatively achieved this with IMAIL 6 / Cold Fusion. * note: I built this interface before I became aware of the power of WEIGHT, changing the filter-definitions to work with weights instead of individual headers is on my to-do list, so if anyone actually does look at this please don't flame me on how I could improve that. I am already aware :) -Original Message- From: Tom Baker|Netsmith Inc [mailto:[EMAIL PROTECTED]] Sent: Thursday, August 29, 2002 10:44 AM To: '[EMAIL PROTECTED]' Subject: RE: [Declude.JunkMail] Address Book Only in Declude? Excuse the typo everyone, I meant to put a "not (!)" in that long string H!~THIS... -Original Message- From: Tom Baker|Netsmith Inc [mailto:[EMAIL PROTECTED]] Sent: Thursday, August 29, 2002 10:41 AM To: '[EMAIL PROTECTED]' Subject: RE: [Declude.JunkMail] Address Book Only in Declude? Oh, for an "address book only" You must also add one last entry at the bottom of rules.ima H~THISWILLNEVERMATCHBECAUSEITSAREALLYLONGBOGUSSSTRING:NUL That will force anything not matched in the above of rules.ima to be deleted Ex: --rules.ima-- H~[EMAIL PROTECTED]:main F~declude.com:main F~[EMAIL PROTECTED]:main H~THISWILLNEVERMATCHBECAUSEITSAREALLYLONGBOGUSSSTRING:NUL --/rules.ima-- Anything that does not match the first 3 lines will be deleted -Original Message- From: Tom Baker|Netsmith Inc [mailto:[EMAIL PROTECTED]] Sent: Thursday, August 29, 2002 10:38 AM To: '[EMAIL PROTECTED]' Subject: RE: [Declude.JunkMail] Address Book Only in Declude? Yes, this is how I already accomplished this for my users. I have a cold fusion interface which verified login/password, then manages their rules.ima Anyone they want to "allow" it writes at the top of the rules.ima... F~[EMAIL PROTECTED]:MAIN Any junk-mail they want to block it sends to SPAM folder H~X-RBL-WARNING:SPAM The "problem" with authorization is that IMAIL passwords are stored in registry, so you have to make your script verify their password via POP3, or use the IMAIL/REG password Decryption routine that I wrote. Could easily be replicated in .asp as well -Original Message- From: John Tolmachoff [mailto:[EMAIL PROTECTED]] Sent: Thursday, August 29, 2002 9:53 AM To: [EMAIL PROTECTED] Subject: RE: [Declude.JunkMail] Address Book Only in Declude? Not to be sarcastic, but wouldn't that be done in a rules.ima file that is configurable by the user? John Tolmachoff IT Manager, Network Engineer RelianceSoft, Inc. Fullerton, CA 92835 www.reliancesoft.com -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of Roger Heath Sent: Thursday, August 29, 2002 7:32 AM To: R. Scott Perry Subject: [Declude.JunkMail] Address Book Only in Declude? I just got the following request from one of my users: R> How do I arrange to receive only emails from members of my address book? In my opinion this could be the biggest feature added to Declude at this time. Here's how I'd like it to work: Declude looks at a text cfg file to see if this feature is turned on for a select domain or e-mail account... for example, if in ADDR.CFG email address or domain wyndows.com or [EMAIL PROTECTED] then Look at c:\Imail\Wyndows\users\heath\aliases.txt MAILFROM exists then pass the e-mail to this account, else delete...or return e-mail as rejected.. How soon can I get this, Scott? -- Roger Heath [EMAIL PROTECTED] www.rleeheath.com -- ActivatorMail(tm) ver.082302 Scanned for all viruses by www.activatormail.com intelligent anti-virus anti-spam service --- [This E-mail was scanned for viruses by Declude Virus (http://www.declude.com)] --- This E-mail came from the Declude.JunkMail mailing list. To unsubscribe, just send an E-mail to [EMAIL PROTECTED], and type "unsubscribe Declude.JunkMail". The archives can be found at http://www.mail-archive.com. --- [This E-mail was scanned for viruses by Declude Virus (http://www.declude.com)] --- This E-mail came from the Declude.JunkMail mailing list. To unsubscribe, just send an E-mail to [EMAIL PROTECTED], and type "unsubscribe Declude.JunkMail". The archives can be found at http://www.m
RE: [Declude.JunkMail] Address Book Only in Declude?
Excuse the typo everyone, I meant to put a "not (!)" in that long string H!~THIS... -Original Message- From: Tom Baker|Netsmith Inc [mailto:[EMAIL PROTECTED]] Sent: Thursday, August 29, 2002 10:41 AM To: '[EMAIL PROTECTED]' Subject: RE: [Declude.JunkMail] Address Book Only in Declude? Oh, for an "address book only" You must also add one last entry at the bottom of rules.ima H~THISWILLNEVERMATCHBECAUSEITSAREALLYLONGBOGUSSSTRING:NUL That will force anything not matched in the above of rules.ima to be deleted Ex: --rules.ima-- H~[EMAIL PROTECTED]:main F~declude.com:main F~[EMAIL PROTECTED]:main H~THISWILLNEVERMATCHBECAUSEITSAREALLYLONGBOGUSSSTRING:NUL --/rules.ima-- Anything that does not match the first 3 lines will be deleted -Original Message- From: Tom Baker|Netsmith Inc [mailto:[EMAIL PROTECTED]] Sent: Thursday, August 29, 2002 10:38 AM To: '[EMAIL PROTECTED]' Subject: RE: [Declude.JunkMail] Address Book Only in Declude? Yes, this is how I already accomplished this for my users. I have a cold fusion interface which verified login/password, then manages their rules.ima Anyone they want to "allow" it writes at the top of the rules.ima... F~[EMAIL PROTECTED]:MAIN Any junk-mail they want to block it sends to SPAM folder H~X-RBL-WARNING:SPAM The "problem" with authorization is that IMAIL passwords are stored in registry, so you have to make your script verify their password via POP3, or use the IMAIL/REG password Decryption routine that I wrote. Could easily be replicated in .asp as well -Original Message- From: John Tolmachoff [mailto:[EMAIL PROTECTED]] Sent: Thursday, August 29, 2002 9:53 AM To: [EMAIL PROTECTED] Subject: RE: [Declude.JunkMail] Address Book Only in Declude? Not to be sarcastic, but wouldn't that be done in a rules.ima file that is configurable by the user? John Tolmachoff IT Manager, Network Engineer RelianceSoft, Inc. Fullerton, CA 92835 www.reliancesoft.com -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of Roger Heath Sent: Thursday, August 29, 2002 7:32 AM To: R. Scott Perry Subject: [Declude.JunkMail] Address Book Only in Declude? I just got the following request from one of my users: R> How do I arrange to receive only emails from members of my address book? In my opinion this could be the biggest feature added to Declude at this time. Here's how I'd like it to work: Declude looks at a text cfg file to see if this feature is turned on for a select domain or e-mail account... for example, if in ADDR.CFG email address or domain wyndows.com or [EMAIL PROTECTED] then Look at c:\Imail\Wyndows\users\heath\aliases.txt MAILFROM exists then pass the e-mail to this account, else delete...or return e-mail as rejected.. How soon can I get this, Scott? -- Roger Heath [EMAIL PROTECTED] www.rleeheath.com -- ActivatorMail(tm) ver.082302 Scanned for all viruses by www.activatormail.com intelligent anti-virus anti-spam service --- [This E-mail was scanned for viruses by Declude Virus (http://www.declude.com)] --- This E-mail came from the Declude.JunkMail mailing list. To unsubscribe, just send an E-mail to [EMAIL PROTECTED], and type "unsubscribe Declude.JunkMail". The archives can be found at http://www.mail-archive.com. --- [This E-mail was scanned for viruses by Declude Virus (http://www.declude.com)] --- This E-mail came from the Declude.JunkMail mailing list. To unsubscribe, just send an E-mail to [EMAIL PROTECTED], and type "unsubscribe Declude.JunkMail". The archives can be found at http://www.mail-archive.com. --- [This E-mail was scanned for viruses by Declude Virus (http://www.declude.com)] --- This E-mail came from the Declude.JunkMail mailing list. To unsubscribe, just send an E-mail to [EMAIL PROTECTED], and type "unsubscribe Declude.JunkMail". The archives can be found at http://www.mail-archive.com. --- [This E-mail was scanned for viruses by Declude Virus (http://www.declude.com)] --- This E-mail came from the Declude.JunkMail mailing list. To unsubscribe, just send an E-mail to [EMAIL PROTECTED], and type "unsubscribe Declude.JunkMail". The archives can be found at http://www.mail-archive.com. --- [This E-mail was scanned for viruses by Declude Virus (http://www.declude.com)] --- This E-mail came from the Declude.JunkMail mailing list. To unsubscribe, just send an E-mail to [EMAIL PROTECTED], and type "unsubscribe Declude.JunkMail". The archives can be found at http://www.mail-archive.com.
RE: [Declude.JunkMail] Address Book Only in Declude?
Oh, for an "address book only" You must also add one last entry at the bottom of rules.ima H~THISWILLNEVERMATCHBECAUSEITSAREALLYLONGBOGUSSSTRING:NUL That will force anything not matched in the above of rules.ima to be deleted Ex: --rules.ima-- H~[EMAIL PROTECTED]:main F~declude.com:main F~[EMAIL PROTECTED]:main H~THISWILLNEVERMATCHBECAUSEITSAREALLYLONGBOGUSSSTRING:NUL --/rules.ima-- Anything that does not match the first 3 lines will be deleted -Original Message- From: Tom Baker|Netsmith Inc [mailto:[EMAIL PROTECTED]] Sent: Thursday, August 29, 2002 10:38 AM To: '[EMAIL PROTECTED]' Subject: RE: [Declude.JunkMail] Address Book Only in Declude? Yes, this is how I already accomplished this for my users. I have a cold fusion interface which verified login/password, then manages their rules.ima Anyone they want to "allow" it writes at the top of the rules.ima... F~[EMAIL PROTECTED]:MAIN Any junk-mail they want to block it sends to SPAM folder H~X-RBL-WARNING:SPAM The "problem" with authorization is that IMAIL passwords are stored in registry, so you have to make your script verify their password via POP3, or use the IMAIL/REG password Decryption routine that I wrote. Could easily be replicated in .asp as well -Original Message- From: John Tolmachoff [mailto:[EMAIL PROTECTED]] Sent: Thursday, August 29, 2002 9:53 AM To: [EMAIL PROTECTED] Subject: RE: [Declude.JunkMail] Address Book Only in Declude? Not to be sarcastic, but wouldn't that be done in a rules.ima file that is configurable by the user? John Tolmachoff IT Manager, Network Engineer RelianceSoft, Inc. Fullerton, CA 92835 www.reliancesoft.com -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of Roger Heath Sent: Thursday, August 29, 2002 7:32 AM To: R. Scott Perry Subject: [Declude.JunkMail] Address Book Only in Declude? I just got the following request from one of my users: R> How do I arrange to receive only emails from members of my address book? In my opinion this could be the biggest feature added to Declude at this time. Here's how I'd like it to work: Declude looks at a text cfg file to see if this feature is turned on for a select domain or e-mail account... for example, if in ADDR.CFG email address or domain wyndows.com or [EMAIL PROTECTED] then Look at c:\Imail\Wyndows\users\heath\aliases.txt MAILFROM exists then pass the e-mail to this account, else delete...or return e-mail as rejected.. How soon can I get this, Scott? -- Roger Heath [EMAIL PROTECTED] www.rleeheath.com -- ActivatorMail(tm) ver.082302 Scanned for all viruses by www.activatormail.com intelligent anti-virus anti-spam service --- [This E-mail was scanned for viruses by Declude Virus (http://www.declude.com)] --- This E-mail came from the Declude.JunkMail mailing list. To unsubscribe, just send an E-mail to [EMAIL PROTECTED], and type "unsubscribe Declude.JunkMail". The archives can be found at http://www.mail-archive.com. --- [This E-mail was scanned for viruses by Declude Virus (http://www.declude.com)] --- This E-mail came from the Declude.JunkMail mailing list. To unsubscribe, just send an E-mail to [EMAIL PROTECTED], and type "unsubscribe Declude.JunkMail". The archives can be found at http://www.mail-archive.com. --- [This E-mail was scanned for viruses by Declude Virus (http://www.declude.com)] --- This E-mail came from the Declude.JunkMail mailing list. To unsubscribe, just send an E-mail to [EMAIL PROTECTED], and type "unsubscribe Declude.JunkMail". The archives can be found at http://www.mail-archive.com. --- [This E-mail was scanned for viruses by Declude Virus (http://www.declude.com)] --- This E-mail came from the Declude.JunkMail mailing list. To unsubscribe, just send an E-mail to [EMAIL PROTECTED], and type "unsubscribe Declude.JunkMail". The archives can be found at http://www.mail-archive.com.
RE: [Declude.JunkMail] Address Book Only in Declude?
Yes, this is how I already accomplished this for my users. I have a cold fusion interface which verified login/password, then manages their rules.ima Anyone they want to "allow" it writes at the top of the rules.ima... F~[EMAIL PROTECTED]:MAIN Any junk-mail they want to block it sends to SPAM folder H~X-RBL-WARNING:SPAM The "problem" with authorization is that IMAIL passwords are stored in registry, so you have to make your script verify their password via POP3, or use the IMAIL/REG password Decryption routine that I wrote. Could easily be replicated in .asp as well -Original Message- From: John Tolmachoff [mailto:[EMAIL PROTECTED]] Sent: Thursday, August 29, 2002 9:53 AM To: [EMAIL PROTECTED] Subject: RE: [Declude.JunkMail] Address Book Only in Declude? Not to be sarcastic, but wouldn't that be done in a rules.ima file that is configurable by the user? John Tolmachoff IT Manager, Network Engineer RelianceSoft, Inc. Fullerton, CA 92835 www.reliancesoft.com -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of Roger Heath Sent: Thursday, August 29, 2002 7:32 AM To: R. Scott Perry Subject: [Declude.JunkMail] Address Book Only in Declude? I just got the following request from one of my users: R> How do I arrange to receive only emails from members of my address book? In my opinion this could be the biggest feature added to Declude at this time. Here's how I'd like it to work: Declude looks at a text cfg file to see if this feature is turned on for a select domain or e-mail account... for example, if in ADDR.CFG email address or domain wyndows.com or [EMAIL PROTECTED] then Look at c:\Imail\Wyndows\users\heath\aliases.txt MAILFROM exists then pass the e-mail to this account, else delete...or return e-mail as rejected.. How soon can I get this, Scott? -- Roger Heath [EMAIL PROTECTED] www.rleeheath.com -- ActivatorMail(tm) ver.082302 Scanned for all viruses by www.activatormail.com intelligent anti-virus anti-spam service --- [This E-mail was scanned for viruses by Declude Virus (http://www.declude.com)] --- This E-mail came from the Declude.JunkMail mailing list. To unsubscribe, just send an E-mail to [EMAIL PROTECTED], and type "unsubscribe Declude.JunkMail". The archives can be found at http://www.mail-archive.com. --- [This E-mail was scanned for viruses by Declude Virus (http://www.declude.com)] --- This E-mail came from the Declude.JunkMail mailing list. To unsubscribe, just send an E-mail to [EMAIL PROTECTED], and type "unsubscribe Declude.JunkMail". The archives can be found at http://www.mail-archive.com. --- [This E-mail was scanned for viruses by Declude Virus (http://www.declude.com)] --- This E-mail came from the Declude.JunkMail mailing list. To unsubscribe, just send an E-mail to [EMAIL PROTECTED], and type "unsubscribe Declude.JunkMail". The archives can be found at http://www.mail-archive.com.
Re[3]: [Declude.JunkMail] Address Book Only in Declude?
Reply to: R. Scott Perry Re: [Declude.JunkMail] Address Book Only in Declude? on Thursday 10:19:03 AM The only problem I see with this is whitelisting... perhaps it should even disregard the whitelist too? Looks like a bounce would be preferable on a feature like this. It would be a great feature. If a user wants to receive e-mails from a select source he or she could just log into web mail and enter the address. It would be nice if they could make a 'CONTAINS' rule by say entering an address like [EMAIL PROTECTED], Then if internet.com was in the HEADERS, it would pass the mail.. Others have suggested making whitelists into separate lists so you can per user or per domain them. Perhaps if you do this all these things can be 'matched up'? -- Roger Heath [EMAIL PROTECTED] www.rleeheath.com - Copy of Original Message(s): - >>Personally we'd like to have this as an add-on and not a standard >>feature. So we'd like only administrator control over this. It >>could be easily misunderstood by users as well. The ability to >>set a whole domain or individual users, like the Pro version of >>Declude is what we really need. R> If something like this does get added, it would likely best fit into R> Declude JunkMail as a test and an action (such as a test "NOTINADDRESSBOOK" R> with an action of BOUNCE or HOLD). That way, it could be applied R> per-domain or per-user, and end users wouldn't have any direct control over it. R>-Scott R> --- R> [This E-mail was scanned for viruses by Declude Virus (http://www.declude.com)] R> --- R> This E-mail came from the Declude.JunkMail mailing list. To R> unsubscribe, just send an E-mail to [EMAIL PROTECTED], and R> type "unsubscribe Declude.JunkMail". The archives can be found R> at http://www.mail-archive.com. R> -- R> ActivatorMail(tm) ver.082302 Scanned for all viruses by R> www.activatormail.com intelligent anti-virus anti-spam service -- ActivatorMail(tm) ver.082302 Scanned for all viruses by www.activatormail.com intelligent anti-virus anti-spam service --- [This E-mail was scanned for viruses by Declude Virus (http://www.declude.com)] --- This E-mail came from the Declude.JunkMail mailing list. To unsubscribe, just send an E-mail to [EMAIL PROTECTED], and type "unsubscribe Declude.JunkMail". The archives can be found at http://www.mail-archive.com.
Re[2]: [Declude.JunkMail] Address Book Only in Declude?
>Personally we'd like to have this as an add-on and not a standard >feature. So we'd like only administrator control over this. It >could be easily misunderstood by users as well. The ability to >set a whole domain or individual users, like the Pro version of >Declude is what we really need. If something like this does get added, it would likely best fit into Declude JunkMail as a test and an action (such as a test "NOTINADDRESSBOOK" with an action of BOUNCE or HOLD). That way, it could be applied per-domain or per-user, and end users wouldn't have any direct control over it. -Scott --- [This E-mail was scanned for viruses by Declude Virus (http://www.declude.com)] --- This E-mail came from the Declude.JunkMail mailing list. To unsubscribe, just send an E-mail to [EMAIL PROTECTED], and type "unsubscribe Declude.JunkMail". The archives can be found at http://www.mail-archive.com.
RE: [Declude.JunkMail] Address Book Only in Declude?
>Unless, of course, Declude were to add a web interface to provide user >self-administration... This is something we would love to do, but would be difficult for a number of reasons. The biggest problem is that IMail doesn't have an interface to web messaging. It would be easy for them to do, so there is hope -- but, I don't know if they will see the demand for it. If they do add one (and it isn't as complex as new Microsoft technologies, which it doesn't need to be), we would certainly add support for it. Assuming that no interface for web messaging occurs, there are many other problems: [1] We would need to write and maintain our own webserver, [2] It would require opening yet another port on firewalls, [3] It would either require minimal security, or would require a huge amount of work authenticating users against multiple data sources or the log files Ideally, Ipswitch will add support for third-party addons to web messaging. It could be done fairly easily -- they could have a URL in the format "http://mail.example.com/X.../addons/filename?data=data...";. If they see the "/addons/", they then parse out "filename" and run \IMail\addons\filename.exe (placed in a separate directory for security reasons), with the username and "data=data" as the parameters passed to it. It should be possible in about 10-20 lines of code. The "data=data" bit would allow data from forms to be sent to the program. If people can come up with other uses for that (besides just for managing Declude), it might be possible to persuade Ipswitch to add the web messaging interface. One thought would be a tool users could use that would search the log file for E-mails that they had sent/received that day. -Scott --- Declude: Anti-virus, Anti-spam and Anti-hijacking solutions for IMail. http://www.declude.com --- [This E-mail was scanned for viruses by Declude Virus (http://www.declude.com)] --- This E-mail came from the Declude.JunkMail mailing list. To unsubscribe, just send an E-mail to [EMAIL PROTECTED], and type "unsubscribe Declude.JunkMail". The archives can be found at http://www.mail-archive.com.
Re[2]: [Declude.JunkMail] Address Book Only in Declude?
Reply to: John Tolmachoff Re: [Declude.JunkMail] Address Book Only in Declude? on Thursday 9:53:27 AM Not to be sarcastic, but how? -- Roger Heath [EMAIL PROTECTED] www.rleeheath.com - Copy of Original Message(s): - J> Not to be sarcastic, but wouldn't that be done in a rules.ima file that J> is configurable by the user? J> John Tolmachoff J> IT Manager, Network Engineer J> RelianceSoft, Inc. J> Fullerton, CA 92835 J> www.reliancesoft.com J> -Original Message- J> From: [EMAIL PROTECTED] J> [mailto:[EMAIL PROTECTED]] On Behalf Of Roger Heath J> Sent: Thursday, August 29, 2002 7:32 AM J> To: R. Scott Perry J> Subject: [Declude.JunkMail] Address Book Only in Declude? J> I just got the following request from one of my users: R>> How do I arrange to receive only emails from members of my address J> book? J> In my opinion this could be the biggest feature added to Declude J> at this time. Here's how I'd like it to work: J> Declude looks at a text cfg file to see if this feature is turned J> on for a select domain or e-mail account... for example, J> if in ADDR.CFG email address or domain wyndows.com or J> [EMAIL PROTECTED] then J> Look at c:\Imail\Wyndows\users\heath\aliases.txt MAILFROM exists J> then pass the e-mail to this account, else delete...or return J> e-mail as rejected.. J> How soon can I get this, Scott? J> -- J> Roger Heath J> [EMAIL PROTECTED] J> www.rleeheath.com J> -- J> ActivatorMail(tm) ver.082302 Scanned for all viruses by J> www.activatormail.com intelligent anti-virus anti-spam service J> --- J> [This E-mail was scanned for viruses by Declude Virus J> (http://www.declude.com)] J> --- J> This E-mail came from the Declude.JunkMail mailing list. To J> unsubscribe, just send an E-mail to [EMAIL PROTECTED], and J> type "unsubscribe Declude.JunkMail". The archives can be found J> at http://www.mail-archive.com. J> --- J> [This E-mail was scanned for viruses by Declude Virus (http://www.declude.com)] J> --- J> This E-mail came from the Declude.JunkMail mailing list. To J> unsubscribe, just send an E-mail to [EMAIL PROTECTED], and J> type "unsubscribe Declude.JunkMail". The archives can be found J> at http://www.mail-archive.com. J> -- J> ActivatorMail(tm) ver.082302 Scanned for all viruses by J> www.activatormail.com intelligent anti-virus anti-spam service -- ActivatorMail(tm) ver.082302 Scanned for all viruses by www.activatormail.com intelligent anti-virus anti-spam service --- [This E-mail was scanned for viruses by Declude Virus (http://www.declude.com)] --- This E-mail came from the Declude.JunkMail mailing list. To unsubscribe, just send an E-mail to [EMAIL PROTECTED], and type "unsubscribe Declude.JunkMail". The archives can be found at http://www.mail-archive.com.
Re[2]: [Declude.JunkMail] Address Book Only in Declude?
Reply to: Kami Razvan Re: [Declude.JunkMail] Address Book Only in Declude? on Thursday 9:48:16 AM Personally we'd like to have this as an add-on and not a standard feature. So we'd like only administrator control over this. It could be easily misunderstood by users as well. The ability to set a whole domain or individual users, like the Pro version of Declude is what we really need. -- Roger Heath [EMAIL PROTECTED] www.rleeheath.com - Copy of Original Message(s): - K> Hi; K> The idea is a good one but I think it truly belongs at the IMail level. K> This way, using the web manager, every user can decide what level of K> mail they want to accept. K> It is sort of like what the JunkMail setting is with Hotmail. Strict, K> allowing only those in the address book to send, or Loose so anyone can K> send. K> If Declude adds this then it is up to the Admin to add this for every K> user upon request. This is a lot of work! K> Just a thought. K> Kami K> -Original Message- K> From: [EMAIL PROTECTED] K> [mailto:[EMAIL PROTECTED]] On Behalf Of Roger Heath K> Sent: Thursday, August 29, 2002 10:32 AM K> To: R. Scott Perry K> Subject: [Declude.JunkMail] Address Book Only in Declude? K> I just got the following request from one of my users: R>> How do I arrange to receive only emails from members of my address R>> book? K> In my opinion this could be the biggest feature added to Declude at K> this time. Here's how I'd like it to work: K> Declude looks at a text cfg file to see if this feature is turned on for K> a select domain or e-mail account... for example, K> if in ADDR.CFG email address or domain wyndows.com or K> [EMAIL PROTECTED] then K> Look at c:\Imail\Wyndows\users\heath\aliases.txt MAILFROM exists then K> pass the e-mail to this account, else delete...or return e-mail as K> rejected.. K> How soon can I get this, Scott? K> -- K> Roger Heath K> [EMAIL PROTECTED] K> www.rleeheath.com K> --- K> [This E-mail was scanned for viruses by Declude Virus (http://www.declude.com)] K> --- K> This E-mail came from the Declude.JunkMail mailing list. To K> unsubscribe, just send an E-mail to [EMAIL PROTECTED], and K> type "unsubscribe Declude.JunkMail". The archives can be found K> at http://www.mail-archive.com. K> -- K> ActivatorMail(tm) ver.082302 Scanned for all viruses by K> www.activatormail.com intelligent anti-virus anti-spam service -- ActivatorMail(tm) ver.082302 Scanned for all viruses by www.activatormail.com intelligent anti-virus anti-spam service --- [This E-mail was scanned for viruses by Declude Virus (http://www.declude.com)] --- This E-mail came from the Declude.JunkMail mailing list. To unsubscribe, just send an E-mail to [EMAIL PROTECTED], and type "unsubscribe Declude.JunkMail". The archives can be found at http://www.mail-archive.com.
RE: [Declude.JunkMail] Address Book Only in Declude?
Unless, of course, Declude were to add a web interface to provide user self-administration... Bill -Original Message- From: Kami Razvan [mailto:[EMAIL PROTECTED]] Sent: Thursday, August 29, 2002 7:48 AM To: [EMAIL PROTECTED] Subject: RE: [Declude.JunkMail] Address Book Only in Declude? Hi; The idea is a good one but I think it truly belongs at the IMail level. This way, using the web manager, every user can decide what level of mail they want to accept. It is sort of like what the JunkMail setting is with Hotmail. Strict, allowing only those in the address book to send, or Loose so anyone can send. If Declude adds this then it is up to the Admin to add this for every user upon request. This is a lot of work! Just a thought. Kami -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of Roger Heath Sent: Thursday, August 29, 2002 10:32 AM To: R. Scott Perry Subject: [Declude.JunkMail] Address Book Only in Declude? I just got the following request from one of my users: R> How do I arrange to receive only emails from members of my address R> book? In my opinion this could be the biggest feature added to Declude at this time. Here's how I'd like it to work: Declude looks at a text cfg file to see if this feature is turned on for a select domain or e-mail account... for example, if in ADDR.CFG email address or domain wyndows.com or [EMAIL PROTECTED] then Look at c:\Imail\Wyndows\users\heath\aliases.txt MAILFROM exists then pass the e-mail to this account, else delete...or return e-mail as rejected.. How soon can I get this, Scott? -- Roger Heath [EMAIL PROTECTED] www.rleeheath.com --- [This E-mail was scanned for viruses by Declude Virus (http://www.declude.com)] --- This E-mail came from the Declude.JunkMail mailing list. To unsubscribe, just send an E-mail to [EMAIL PROTECTED], and type "unsubscribe Declude.JunkMail". The archives can be found at http://www.mail-archive.com. --- [This e-mail was scanned for viruses by Pointshare's Virus Scanning Service] --- [This E-mail was scanned for viruses by Declude Virus (http://www.declude.com)] --- This E-mail came from the Declude.JunkMail mailing list. To unsubscribe, just send an E-mail to [EMAIL PROTECTED], and type "unsubscribe Declude.JunkMail". The archives can be found at http://www.mail-archive.com.
RE: [Declude.JunkMail] Address Book Only in Declude?
Not to be sarcastic, but wouldn't that be done in a rules.ima file that is configurable by the user? John Tolmachoff IT Manager, Network Engineer RelianceSoft, Inc. Fullerton, CA 92835 www.reliancesoft.com -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of Roger Heath Sent: Thursday, August 29, 2002 7:32 AM To: R. Scott Perry Subject: [Declude.JunkMail] Address Book Only in Declude? I just got the following request from one of my users: R> How do I arrange to receive only emails from members of my address book? In my opinion this could be the biggest feature added to Declude at this time. Here's how I'd like it to work: Declude looks at a text cfg file to see if this feature is turned on for a select domain or e-mail account... for example, if in ADDR.CFG email address or domain wyndows.com or [EMAIL PROTECTED] then Look at c:\Imail\Wyndows\users\heath\aliases.txt MAILFROM exists then pass the e-mail to this account, else delete...or return e-mail as rejected.. How soon can I get this, Scott? -- Roger Heath [EMAIL PROTECTED] www.rleeheath.com -- ActivatorMail(tm) ver.082302 Scanned for all viruses by www.activatormail.com intelligent anti-virus anti-spam service --- [This E-mail was scanned for viruses by Declude Virus (http://www.declude.com)] --- This E-mail came from the Declude.JunkMail mailing list. To unsubscribe, just send an E-mail to [EMAIL PROTECTED], and type "unsubscribe Declude.JunkMail". The archives can be found at http://www.mail-archive.com. --- [This E-mail was scanned for viruses by Declude Virus (http://www.declude.com)] --- This E-mail came from the Declude.JunkMail mailing list. To unsubscribe, just send an E-mail to [EMAIL PROTECTED], and type "unsubscribe Declude.JunkMail". The archives can be found at http://www.mail-archive.com.
RE: [Declude.JunkMail] Address Book Only in Declude?
Hi; The idea is a good one but I think it truly belongs at the IMail level. This way, using the web manager, every user can decide what level of mail they want to accept. It is sort of like what the JunkMail setting is with Hotmail. Strict, allowing only those in the address book to send, or Loose so anyone can send. If Declude adds this then it is up to the Admin to add this for every user upon request. This is a lot of work! Just a thought. Kami -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of Roger Heath Sent: Thursday, August 29, 2002 10:32 AM To: R. Scott Perry Subject: [Declude.JunkMail] Address Book Only in Declude? I just got the following request from one of my users: R> How do I arrange to receive only emails from members of my address R> book? In my opinion this could be the biggest feature added to Declude at this time. Here's how I'd like it to work: Declude looks at a text cfg file to see if this feature is turned on for a select domain or e-mail account... for example, if in ADDR.CFG email address or domain wyndows.com or [EMAIL PROTECTED] then Look at c:\Imail\Wyndows\users\heath\aliases.txt MAILFROM exists then pass the e-mail to this account, else delete...or return e-mail as rejected.. How soon can I get this, Scott? -- Roger Heath [EMAIL PROTECTED] www.rleeheath.com --- [This E-mail was scanned for viruses by Declude Virus (http://www.declude.com)] --- This E-mail came from the Declude.JunkMail mailing list. To unsubscribe, just send an E-mail to [EMAIL PROTECTED], and type "unsubscribe Declude.JunkMail". The archives can be found at http://www.mail-archive.com.
[Declude.JunkMail] Address Book Only in Declude?
I just got the following request from one of my users: R> How do I arrange to receive only emails from members of my address book? In my opinion this could be the biggest feature added to Declude at this time. Here's how I'd like it to work: Declude looks at a text cfg file to see if this feature is turned on for a select domain or e-mail account... for example, if in ADDR.CFG email address or domain wyndows.com or [EMAIL PROTECTED] then Look at c:\Imail\Wyndows\users\heath\aliases.txt MAILFROM exists then pass the e-mail to this account, else delete...or return e-mail as rejected.. How soon can I get this, Scott? -- Roger Heath [EMAIL PROTECTED] www.rleeheath.com -- ActivatorMail(tm) ver.082302 Scanned for all viruses by www.activatormail.com intelligent anti-virus anti-spam service --- [This E-mail was scanned for viruses by Declude Virus (http://www.declude.com)] --- This E-mail came from the Declude.JunkMail mailing list. To unsubscribe, just send an E-mail to [EMAIL PROTECTED], and type "unsubscribe Declude.JunkMail". The archives can be found at http://www.mail-archive.com.
