[Desktop-packages] [Bug 1077510] Re: [BlackOps, Realtek ALC889A, Green Line Out, Rear] Underruns, dropouts or crackling sound

[Raymond]

if you can automute on windows 7 without noise, this mean bug in alsa
jack detection

does the Mic at front  panel also has this syndrome ?

did previous version of linux (e.g. 10.04) has this noise ?

do disable auto mute help ?

do it help if you remove [front headphone jack] in pulseaudio mixer
headphone conf?

do you need to disable those jack detection of front audio panel is
enough ?  or jack detecion of rear panel as well

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to alsa-driver in Ubuntu.
https://bugs.launchpad.net/bugs/1077510

Title:
  [BlackOps, Realtek ALC889A, Green Line Out, Rear] Underruns, dropouts
  or crackling sound

Status in “alsa-driver” package in Ubuntu:
  Confirmed

Bug description:
  All audio sources tried produce the same result: stuttering/glitching
  sound when software mixer volume (NOT hardware/speaker volume) is
  turned up, no sound at all when mixer volume is low. Have tried online
  video (YouTube), and opening various audio file formats (wav, mp3,
  flac, ogg) using various applications (Audacious, VLC, Audacity, Movie
  Player) all with the same result.

  I have Ubuntu Studio installed on a multiboot system, alongside Linux
  Mint and Mageia (latest stable release of each as at 1 Nov 2012) - all
  of which are exhibiting the same problem.

  However, I still have my original installation of Windows 7, where the
  audio is working fine.

  I am following the instructions on this wiki page, hence why I'm reporting 
the bug:
  https://wiki.ubuntu.com/DebuggingSoundProblems

  Many thanks in advance! :)

  ProblemType: Bug
  DistroRelease: Ubuntu 12.10
  Package: alsa-base 1.0.25+dfsg-0ubuntu3
  ProcVersionSignature: Ubuntu 3.5.0-18.18-lowlatency 3.5.7
  Uname: Linux 3.5.0-18-lowlatency x86_64
  ApportVersion: 2.6.1-0ubuntu6
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC1:  james  1700 F xfce4-volumed
james  1753 F pulseaudio
   /dev/snd/controlC0:  james  1700 F xfce4-volumed
james  1753 F pulseaudio
  CurrentDmesg:
   [   16.898460] tg3 :04:00.0: eth0: Link is up at 100 Mbps, full duplex
   [   16.898463] tg3 :04:00.0: eth0: Flow control is off for TX and off 
for RX
   [   16.898804] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  Date: Sat Nov 10 22:27:50 2012
  InstallationDate: Installed on 2012-11-09 (1 days ago)
  InstallationMedia: Ubuntu-Studio 12.10 "Quantal Quetzal" - Release amd64 
(20121017.1)
  MarkForUpload: True
  PackageArchitecture: all
  SourcePackage: alsa-driver
  Symptom: audio
  Symptom_AlsaPlaybackTest: ALSA playback test through plughw:Intel failed
  Symptom_Card: Built-in Audio - HDA Intel
  Symptom_Jack: Green Line Out, Rear
  Symptom_Type: Underruns, dropouts, or "crackling" sound
  Title: [BlackOps, Realtek ALC889A, Green Line Out, Rear] Underruns, dropouts 
or crackling sound
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 05/08/2009
  dmi.bios.vendor: Phoenix Technologies, LTD
  dmi.bios.version: 6.00 PG
  dmi.board.name: BlackOps
  dmi.board.vendor: Foxconn
  dmi.board.version: FAB A
  dmi.chassis.type: 3
  dmi.chassis.vendor: OEM
  dmi.chassis.version: OEM
  dmi.modalias: 
dmi:bvnPhoenixTechnologies,LTD:bvr6.00PG:bd05/08/2009:svnFoxconn:pnBlackOps:pvrFABA:rvnFoxconn:rnBlackOps:rvrFABA:cvnOEM:ct3:cvrOEM:
  dmi.product.name: BlackOps
  dmi.product.version: FAB A
  dmi.sys.vendor: Foxconn

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1077510/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 207138] Re: Malayalam: is a pre-processor required?

[Thomas Hotz]

** Changed in: texlive-bin (Ubuntu)
   Status: New => Confirmed

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to texlive-bin in Ubuntu.
https://bugs.launchpad.net/bugs/207138

Title:
  Malayalam: is a pre-processor required?

Status in “texlive-bin” package in Ubuntu:
  Confirmed

Bug description:
  Binary package hint: texlive-lang-indic

  The description for texlive-lang-indic says, "malayalam -- Fonts for
  typesetting Malayalam, with a pre-processor."

  Does this mean that the pre-processor is required?  If so, is it
  included in the package?

  The malayalam package and help file (mm-usr-0.9.6.pdf) over at sarovar
  (http://sarovar.org/frs/?group_id=17&release_id=795) indicate that the
  LaTeX file gets saved as a .mm file.  Then the the script mal is run
  on that .mm file.  The resulting output is a .tex file that can be
  processed with latex or pdftex.  BUT, the mal script and the mlym
  binary that it calls are not packaged with texlive-lang-indic.

  If i grab the latest version malayalam-0.9.6.tar.gz from sarovar and
  install it, then i have the mal script and mlym binary. But I had
  expected them to be installed with texlive-lang-indic since
  /usr/bin/devnag and /usr/bin/ebong are installed as part of texlive-
  lang-indic.

  This is all with Ubuntu 7.10 and texlive-lang-indic 2007-12ubuntu3.1.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/texlive-bin/+bug/207138/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1077577] [NEW] menubar absent

[Hazique Quazi]

Public bug reported:

Whenever i open the libreoffice impress to create a new presentation or open an 
existing presentation with libreoffice impress, there is no menubar present.
Also, if i try to access the menubar items via the HUD, i don't get any results.
This happens only in LibreOffice Impress. The LibreOffice Writer and 
LibreOffice Calc are not showing this anamoly.

ProblemType: Bug
DistroRelease: Ubuntu 12.10
Package: libreoffice (not installed)
ProcVersionSignature: Ubuntu 3.5.0-18.29-generic 3.5.7
Uname: Linux 3.5.0-18-generic x86_64
ApportVersion: 2.6.1-0ubuntu6
Architecture: amd64
Date: Sun Nov 11 13:04:51 2012
InstallationDate: Installed on 2012-10-29 (12 days ago)
InstallationMedia: Ubuntu 12.10 "Quantal Quetzal" - Release amd64 (20121017.5)
MarkForUpload: True
ProcEnviron:
 LANGUAGE=en_IN:en
 PATH=(custom, no user)
 XDG_RUNTIME_DIR=
 LANG=en_IN
 SHELL=/bin/bash
SourcePackage: libreoffice
UpgradeStatus: No upgrade log present (probably fresh install)

** Affects: libreoffice (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: amd64 apport-bug quantal running-unity

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to libreoffice in Ubuntu.
https://bugs.launchpad.net/bugs/1077577

Title:
  menubar absent

Status in “libreoffice” package in Ubuntu:
  New

Bug description:
  Whenever i open the libreoffice impress to create a new presentation or open 
an existing presentation with libreoffice impress, there is no menubar present.
  Also, if i try to access the menubar items via the HUD, i don't get any 
results.
  This happens only in LibreOffice Impress. The LibreOffice Writer and 
LibreOffice Calc are not showing this anamoly.

  ProblemType: Bug
  DistroRelease: Ubuntu 12.10
  Package: libreoffice (not installed)
  ProcVersionSignature: Ubuntu 3.5.0-18.29-generic 3.5.7
  Uname: Linux 3.5.0-18-generic x86_64
  ApportVersion: 2.6.1-0ubuntu6
  Architecture: amd64
  Date: Sun Nov 11 13:04:51 2012
  InstallationDate: Installed on 2012-10-29 (12 days ago)
  InstallationMedia: Ubuntu 12.10 "Quantal Quetzal" - Release amd64 (20121017.5)
  MarkForUpload: True
  ProcEnviron:
   LANGUAGE=en_IN:en
   PATH=(custom, no user)
   XDG_RUNTIME_DIR=
   LANG=en_IN
   SHELL=/bin/bash
  SourcePackage: libreoffice
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/libreoffice/+bug/1077577/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1077561] Re: flash movies won't leave fullscreen mode with esc key

[Chris Coulson]

** Package changed: firefox (Ubuntu) => flashplugin-nonfree (Ubuntu)

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to flashplugin-nonfree in Ubuntu.
https://bugs.launchpad.net/bugs/1077561

Title:
  flash movies won't leave fullscreen mode with esc key

Status in “flashplugin-nonfree” package in Ubuntu:
  New

Bug description:
  When watching flash movies I click on the full screen button it
  displays a message saying to leave full screen hit the escape key,
  however it doesn't immediately to this, it requires clicking on the
  screen, sometimes multiple times, then hitting escape in order to get
  the flash movie to successfully leave full screen mode.

  Ubuntu 12.04 "Precise" 64 bit using Firefox 16.0.2 with Flash Player
  version 11.2.202.251

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/flashplugin-nonfree/+bug/1077561/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1077574] Re: Some elements become unreadable when enabled dark theme for all applications from gnome shell tweak tool

[Rajesh KSV]

More screenshots

** Attachment added: "Gnome contacts"
   
https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1077574/+attachment/3430204/+files/Screenshot%20from%202012-11-11%2012%3A34%3A55.png

** Package changed: network-manager (Ubuntu) => gnome-shell (Ubuntu)

** Summary changed:

- Some elements become unreadable when enabled dark theme for all applications 
from gnome shell tweak tool
+ Some elements become unreadable when enabled "Dark theme for all 
applications" from gnome shell tweak tool

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to network-manager in Ubuntu.
https://bugs.launchpad.net/bugs/1077574

Title:
  Some elements become unreadable when enabled "Dark theme for all
  applications" from gnome shell tweak tool

Status in “gnome-shell” package in Ubuntu:
  New

Bug description:
  I am using Gnome shell 3.6.1 on Ubuntu 12.10

  When selected "Enable dark theme for all applications" option from
  Gnome shell tweak tool, some elements of some applications become
  unreadable - Ubuntu Software Center, Gnome contacts are few among
  them. Please fix it.

  Attached screenshots here.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/gnome-shell/+bug/1077574/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1077574] [NEW] Some elements become unreadable when enabled "Dark theme for all applications" from gnome shell tweak tool

[Rajesh KSV]

Public bug reported:

I am using Gnome shell 3.6.1 on Ubuntu 12.10

When selected "Enable dark theme for all applications" option from Gnome
shell tweak tool, some elements of some applications become unreadable -
Ubuntu Software Center, Gnome contacts are few among them. Please fix
it.

Attached screenshots here.

** Affects: gnome-shell (Ubuntu)
 Importance: Undecided
 Status: New

** Attachment added: "Ubuntu Software center"
   
https://bugs.launchpad.net/bugs/1077574/+attachment/3430203/+files/Screenshot%20from%202012-11-11%2012%3A36%3A06.png

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to network-manager in Ubuntu.
https://bugs.launchpad.net/bugs/1077574

Title:
  Some elements become unreadable when enabled "Dark theme for all
  applications" from gnome shell tweak tool

Status in “gnome-shell” package in Ubuntu:
  New

Bug description:
  I am using Gnome shell 3.6.1 on Ubuntu 12.10

  When selected "Enable dark theme for all applications" option from
  Gnome shell tweak tool, some elements of some applications become
  unreadable - Ubuntu Software Center, Gnome contacts are few among
  them. Please fix it.

  Attached screenshots here.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/gnome-shell/+bug/1077574/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 933308] Re: cupsd failed to create /var/run/cups/cups.sock, skipping automatic printer configuration

[dino99]

Still get that error on RR i386, logged inside /var/log/upstart/cups.log

** Tags added: i386 raring

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to cups in Ubuntu.
https://bugs.launchpad.net/bugs/933308

Title:
  cupsd failed to create /var/run/cups/cups.sock, skipping automatic
  printer configuration

Status in “cups” package in Ubuntu:
  Confirmed

Bug description:
  With upstart logging enabled, the cups upstart job routinely spits the
  following error out to /var/log/upstart/cups.log:

cupsd failed to create /var/run/cups/cups.sock, skipping automatic
  printer configuration

  Indeed, cups seems to get around to creating the socket several
  seconds after the cups post-start script stops waiting for it.

  $ ls -l --full-time /var/log/upstart/cups.log 
  -rw-r- 1 root root 90 2012-02-15 22:23:01.937144478 -0800 
/var/log/upstart/cups.log
  $ ls -l --full-time /var/run/cups/cups.sock 
  srwxrwxrwx 1 root root 0 2012-02-15 22:23:13.261144768 -0800 
/var/run/cups/cups.sock
  $

  So it doesn't look like a 3 second timeout is realistically long
  enough here.

  ProblemType: Bug
  DistroRelease: Ubuntu 12.04
  Package: cups 1.5.2-3
  ProcVersionSignature: Ubuntu 3.2.0-16.25-generic 3.2.6
  Uname: Linux 3.2.0-16-generic x86_64
  ApportVersion: 1.91-0ubuntu1
  Architecture: amd64
  CheckboxSubmission: 017452a27eca3c8b498abbfa5ef91db9
  CheckboxSystem: ecaaad6fa1e0799a0aa1126bf620f39e
  Date: Thu Feb 16 00:03:35 2012
  InstallationMedia: Ubuntu 10.04.1 LTS "Lucid Lynx" - Release amd64 
(20100816.1)
  Lpstat:
   device for davidson-printer: smb://WORKGROUP/EXCALIBUR/Printer2
   device for HP-Color-LaserJet-CM1312-MFP: 
hp:/usb/HP_Color_LaserJet_CM1312_MFP?serial=00CNB882VG58
   device for HP-PSC-750: ipp://207.224.24.210:631/printers/PSC_750
   device for HP-PSC-750-legal: ipp://207.224.24.210:631/printers/PSC_750
  MachineType: LENOVO 3249CTO
  Papersize: letter
  PpdFiles:
   HP-PSC-750: HP PSC 750, hpcups 3.12.2
   davidson-printer: HP Color LaserJet CP3505 Postscript (recommended)
   HP-Color-LaserJet-CM1312-MFP: HP Color LaserJet CM1312 MFP Series Postscript 
(recommended)
   HP-PSC-750-legal: HP PSC 750, hpcups 3.12.2
  ProcEnviron:
   PATH=(custom, user)
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.2.0-16-generic 
root=/dev/mapper/hostname-root ro pcie_aspm=force i915.i915_enable_rc6=1 quiet 
splash vt.handoff=7
  SourcePackage: cups
  UpgradeStatus: Upgraded to precise on 2011-11-08 (99 days ago)
  dmi.bios.date: 08/23/2010
  dmi.bios.vendor: LENOVO
  dmi.bios.version: 6QET52WW (1.22 )
  dmi.board.name: 3249CTO
  dmi.board.vendor: LENOVO
  dmi.board.version: Not Available
  dmi.chassis.asset.tag: No Asset Information
  dmi.chassis.type: 10
  dmi.chassis.vendor: LENOVO
  dmi.chassis.version: Not Available
  dmi.modalias: 
dmi:bvnLENOVO:bvr6QET52WW(1.22):bd08/23/2010:svnLENOVO:pn3249CTO:pvrThinkPadX201:rvnLENOVO:rn3249CTO:rvrNotAvailable:cvnLENOVO:ct10:cvrNotAvailable:
  dmi.product.name: 3249CTO
  dmi.product.version: ThinkPad X201
  dmi.sys.vendor: LENOVO
  modified.conffile..etc.cups.cupsd.conf: [modified]
  modified.conffile..etc.default.cups: [modified]
  mtime.conffile..etc.cups.cupsd.conf: 2011-08-09T08:12:10.630009
  mtime.conffile..etc.default.cups: 2010-09-25T01:44:40.784776

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/cups/+bug/933308/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1077571] [NEW] Unknown username "dnsmasq" in message bus configuration file

[dino99]

Public bug reported:

Get that error logged inside /var/log/upstart/dbus.log

ProblemType: Bug
DistroRelease: Ubuntu 13.04
Package: network-manager 0.9.6.0-0ubuntu7
ProcVersionSignature: Ubuntu 3.7.0-0.5-generic 3.7.0-rc4
Uname: Linux 3.7.0-0-generic i686
ApportVersion: 2.6.2-0ubuntu3
Architecture: i386
CRDA: Error: command ['iw', 'reg', 'get'] failed with exit code 1: nl80211 not 
found.
Date: Sun Nov 11 08:10:33 2012
IpRoute:
 default via 192.168.1.1 dev eth0  proto static 
 169.254.0.0/16 dev eth0  scope link  metric 1000 
 192.168.1.0/24 dev eth0  proto kernel  scope link  src 192.168.1.2  metric 1
IwConfig:
 lono wireless extensions.
 
 eth0  no wireless extensions.
 
 eth1  no wireless extensions.
MarkForUpload: True
NetworkManager.state:
 [main]
 NetworkingEnabled=true
 WirelessEnabled=true
 WWANEnabled=true
 WimaxEnabled=true
RfKill:
 
SourcePackage: network-manager
UpgradeStatus: No upgrade log present (probably fresh install)
WifiSyslog:
 
WpaSupplicantLog:
 
nmcli-con:
 NAME  UUID   TYPE  
TIMESTAMPTIMESTAMP-REAL AUTOCONNECT   READONLY   
DBUS-PATH 
 Connexion filaire 2   f023ceed-00a1-404d-ac10-3211d2834dcc   
802-3-ethernet1352614380   dim. 11 nov. 2012 07:13:00 CET yes   
no /org/freedesktop/NetworkManager/Settings/1
 Connexion filaire 1   72df9ef1-ebe6-4b11-8f73-40f25abdf859   
802-3-ethernet1352617679   dim. 11 nov. 2012 08:07:59 CET yes   
no /org/freedesktop/NetworkManager/Settings/0
nmcli-dev:
 DEVICE TYPE  STATE DBUS-PATH   
   
 eth1   802-3-ethernetunavailable   
/org/freedesktop/NetworkManager/Devices/1  
 eth0   802-3-ethernetconnected 
/org/freedesktop/NetworkManager/Devices/0
nmcli-nm:
 RUNNING VERSIONSTATE   NET-ENABLED   WIFI-HARDWARE   WIFI  
 WWAN-HARDWARE   WWAN  
 running 0.9.6.0connected   enabled   enabled 
enabledenabled disabled

** Affects: network-manager (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: apport-bug i386 raring

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to network-manager in Ubuntu.
https://bugs.launchpad.net/bugs/1077571

Title:
  Unknown username "dnsmasq" in message bus configuration file

Status in “network-manager” package in Ubuntu:
  New

Bug description:
  Get that error logged inside /var/log/upstart/dbus.log

  ProblemType: Bug
  DistroRelease: Ubuntu 13.04
  Package: network-manager 0.9.6.0-0ubuntu7
  ProcVersionSignature: Ubuntu 3.7.0-0.5-generic 3.7.0-rc4
  Uname: Linux 3.7.0-0-generic i686
  ApportVersion: 2.6.2-0ubuntu3
  Architecture: i386
  CRDA: Error: command ['iw', 'reg', 'get'] failed with exit code 1: nl80211 
not found.
  Date: Sun Nov 11 08:10:33 2012
  IpRoute:
   default via 192.168.1.1 dev eth0  proto static 
   169.254.0.0/16 dev eth0  scope link  metric 1000 
   192.168.1.0/24 dev eth0  proto kernel  scope link  src 192.168.1.2  metric 1
  IwConfig:
   lono wireless extensions.
   
   eth0  no wireless extensions.
   
   eth1  no wireless extensions.
  MarkForUpload: True
  NetworkManager.state:
   [main]
   NetworkingEnabled=true
   WirelessEnabled=true
   WWANEnabled=true
   WimaxEnabled=true
  RfKill:
   
  SourcePackage: network-manager
  UpgradeStatus: No upgrade log present (probably fresh install)
  WifiSyslog:
   
  WpaSupplicantLog:
   
  nmcli-con:
   NAME  UUID   TYPE
  TIMESTAMPTIMESTAMP-REAL AUTOCONNECT   READONLY   
DBUS-PATH 
   Connexion filaire 2   f023ceed-00a1-404d-ac10-3211d2834dcc   
802-3-ethernet1352614380   dim. 11 nov. 2012 07:13:00 CET yes   
no /org/freedesktop/NetworkManager/Settings/1
   Connexion filaire 1   72df9ef1-ebe6-4b11-8f73-40f25abdf859   
802-3-ethernet1352617679   dim. 11 nov. 2012 08:07:59 CET yes   
no /org/freedesktop/NetworkManager/Settings/0
  nmcli-dev:
   DEVICE TYPE  STATE DBUS-PATH 
 
   eth1   802-3-ethernetunavailable   
/org/freedesktop/NetworkManager/Devices/1  
   eth0   802-3-ethernetconnected 
/org/freedesktop/NetworkManager/Devices/0
  nmcli-nm:
   RUNNING VERSIONSTATE   NET-ENABLED   WIFI-HARDWARE   
WIFI   WWAN-HARDWARE   WWAN  
   running 0.9.6.0connected   enabled   enabled 
enabledenabled disabled

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1077571/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchp

[Desktop-packages] [Bug 1077569] [NEW] rm: cannot remove `/run/user/oem/gvfs': Is a directory

[dino99]

Public bug reported:

Get that error inside /var/log/upstart/lightdm.log

ProblemType: Bug
DistroRelease: Ubuntu 13.04
Package: lightdm 1.4.0-0ubuntu2
ProcVersionSignature: Ubuntu 3.7.0-0.5-generic 3.7.0-rc4
Uname: Linux 3.7.0-0-generic i686
ApportVersion: 2.6.2-0ubuntu3
Architecture: i386
Date: Sun Nov 11 07:59:13 2012
MarkForUpload: True
SourcePackage: lightdm
UpgradeStatus: No upgrade log present (probably fresh install)

** Affects: lightdm (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: apport-bug i386 raring

** Description changed:

- Get that error inside lightdm.log
+ Get that error inside /var/log/upstart/lightdm.log
  
  ProblemType: Bug
  DistroRelease: Ubuntu 13.04
  Package: lightdm 1.4.0-0ubuntu2
  ProcVersionSignature: Ubuntu 3.7.0-0.5-generic 3.7.0-rc4
  Uname: Linux 3.7.0-0-generic i686
  ApportVersion: 2.6.2-0ubuntu3
  Architecture: i386
  Date: Sun Nov 11 07:59:13 2012
  MarkForUpload: True
  SourcePackage: lightdm
  UpgradeStatus: No upgrade log present (probably fresh install)

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to lightdm in Ubuntu.
https://bugs.launchpad.net/bugs/1077569

Title:
  rm: cannot remove `/run/user/oem/gvfs': Is a directory

Status in “lightdm” package in Ubuntu:
  New

Bug description:
  Get that error inside /var/log/upstart/lightdm.log

  ProblemType: Bug
  DistroRelease: Ubuntu 13.04
  Package: lightdm 1.4.0-0ubuntu2
  ProcVersionSignature: Ubuntu 3.7.0-0.5-generic 3.7.0-rc4
  Uname: Linux 3.7.0-0-generic i686
  ApportVersion: 2.6.2-0ubuntu3
  Architecture: i386
  Date: Sun Nov 11 07:59:13 2012
  MarkForUpload: True
  SourcePackage: lightdm
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/lightdm/+bug/1077569/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1065578] Re: GIMP-Unity-Integration needs to be improved

[Thomas Hotz]

** Also affects: unity
   Importance: Undecided
   Status: New

** No longer affects: unity

** Bug watch added: GNOME Bug Tracker #688080
   https://bugzilla.gnome.org/show_bug.cgi?id=688080

** Also affects: gimp via
   https://bugzilla.gnome.org/show_bug.cgi?id=688080
   Importance: Unknown
   Status: Unknown

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to gimp in Ubuntu.
https://bugs.launchpad.net/bugs/1065578

Title:
  GIMP-Unity-Integration needs to be improved

Status in The GNU Image Manipulation Program (GIMP):
  Unknown
Status in “compiz” package in Ubuntu:
  Confirmed
Status in “gimp” package in Ubuntu:
  Confirmed
Status in “unity” package in Ubuntu:
  Confirmed

Bug description:
  Unlike other applications GIMP don't open maximised if it is closed
  maximised. This happens in the one-window-mode.

  When reopened after being closed maximised, the program window is too
  large for the screen space available and extends below the bottom edge
  of the screen. This was confirmed at least for GIMP.

  This happens at least for me with a monitor resolution of 1366 x 768.

  ProblemType: Bug
  DistroRelease: Ubuntu 12.10
  Package: gimp 2.8.2-1ubuntu1
  ProcVersionSignature: Ubuntu 3.5.0-17.28-generic 3.5.5
  Uname: Linux 3.5.0-17-generic x86_64
  ApportVersion: 2.6.1-0ubuntu3
  Architecture: amd64
  Date: Thu Oct 11 18:30:20 2012
  InstallationMedia: Ubuntu 12.10 "Quantal Quetzal" - Beta amd64 (20121011)
  SourcePackage: gimp
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/gimp/+bug/1065578/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1077415] Re: No recursive search with the simple engine

[Launchpad Bug Tracker]

Status changed to 'Confirmed' because the bug affects multiple users.

** Changed in: nautilus (Ubuntu)
   Status: New => Confirmed

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to nautilus in Ubuntu.
https://bugs.launchpad.net/bugs/1077415

Title:
  No recursive search with the simple engine

Status in “nautilus” package in Ubuntu:
  Confirmed

Bug description:
  Currently nautilus (1:3.6.2-0ubuntu2 in raring only searches current dir.  
The recursive search was re-enabled in git shortly after 3.6.1 was released & 
could be added to the current nautilus build in raring
  (i've been using  3.6.2-0ubuntu2 patched with all 4 commits mentioned here  & 
seen no issues.
  http://bazaar.launchpad.net/~vcs-imports/nautilus/master-git/revision/16734
  I'd also look @ 16733 & 16732 plus possibly 16768

  ProblemType: Bug
  DistroRelease: Ubuntu 13.04
  Package: nautilus 1:3.6.2-0ubuntu2
  ProcVersionSignature: Ubuntu 3.5.0-17.28-generic 3.5.5
  Uname: Linux 3.5.0-17-generic x86_64
  ApportVersion: 2.6.2-0ubuntu3
  Architecture: amd64
  Date: Sat Nov 10 12:26:52 2012
  GsettingsChanges:
   b'org.gnome.nautilus.window-state' b'geometry' b"'1043x520+236+24'"
   b'org.gnome.nautilus.window-state' b'sidebar-width' b'164'
  InstallationDate: Installed on 2012-10-23 (18 days ago)
  InstallationMedia: Ubuntu 12.10 "Quantal Quetzal" - Release amd64 (20121017)
  MarkForUpload: True
  ProcEnviron:
   TERM=xterm
   PATH=(custom, no user)
   XDG_RUNTIME_DIR=
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  SourcePackage: nautilus
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/nautilus/+bug/1077415/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1065578] Re: GIMP-Unity-Integration needs to be improved

[Thomas Hotz]

** Also affects: unity (Ubuntu)
   Importance: Undecided
   Status: New

** Changed in: unity (Ubuntu)
   Status: New => Confirmed

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to gimp in Ubuntu.
https://bugs.launchpad.net/bugs/1065578

Title:
  GIMP-Unity-Integration needs to be improved

Status in “compiz” package in Ubuntu:
  Confirmed
Status in “gimp” package in Ubuntu:
  Confirmed
Status in “unity” package in Ubuntu:
  Confirmed

Bug description:
  Unlike other applications GIMP don't open maximised if it is closed
  maximised. This happens in the one-window-mode.

  When reopened after being closed maximised, the program window is too
  large for the screen space available and extends below the bottom edge
  of the screen. This was confirmed at least for GIMP.

  This happens at least for me with a monitor resolution of 1366 x 768.

  ProblemType: Bug
  DistroRelease: Ubuntu 12.10
  Package: gimp 2.8.2-1ubuntu1
  ProcVersionSignature: Ubuntu 3.5.0-17.28-generic 3.5.5
  Uname: Linux 3.5.0-17-generic x86_64
  ApportVersion: 2.6.1-0ubuntu3
  Architecture: amd64
  Date: Thu Oct 11 18:30:20 2012
  InstallationMedia: Ubuntu 12.10 "Quantal Quetzal" - Beta amd64 (20121011)
  SourcePackage: gimp
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/compiz/+bug/1065578/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1077449] Re: Modem doesn't work in 12.04 3.2.0-32-generic (#51-Ubuntu SMP Wed Sep 26 21:33:09 UTC 2012)

[Roger Davis]

If I understand correctly, wvdial is a PPP intended to connect to an
ISP.

This is not the point of difficulty.  The point of difficulty is the
breakdown of primary communication with the modem, well before the time
of connecting with an ISP.

The modem will simply not respond at all in minicom or Efax-gtk, whereas
it works fine in Windoze.  An "AT" command in minicom gets absolutely no
response.  Efax-gtk simply will not dial at all.  I can't certify even
that initialization is occurring on either of the above, because there
is nothing returned from the modem to indicate that it is or is not
initialized.

This seems to me to point to a fault in the basic communication with the
modem, not higher level communications to an outside connection.

Thanks!

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to wvdial in Ubuntu.
https://bugs.launchpad.net/bugs/1077449

Title:
  Modem doesn't work in 12.04 3.2.0-32-generic (#51-Ubuntu SMP Wed Sep
  26 21:33:09 UTC 2012)

Status in “wvdial” package in Ubuntu:
  New

Bug description:
  Minicom and Efax-gtk will not work.  Both appear to iniatialize, but
  no further function, no response to modem commands given, etc.  I'm
  NOT trying to connect to an ISP right now, I just want to use it with
  eFax-GTK.

  This exact same modem and computer worked together very well until
  recently.  There had been several updates, including Ubuntu before it
  just quit working.

  This modem works fine in Windoze, SAME machine, just switched to
  Ubuntu 12.04 drive by mechanical switch. I can go back and forth,
  always works in Windoze, never in Ubuntu.

  Modem will attempt to answer an incoming call, but can't be sure about
  function since I don't have another modem to call with.

  I have come to the conclusion that there is very likely a problem
  within the updated Ubuntu that prevents proper modem communication.

  IN MINICOM :
  Welcome to minicom 2.5
  OPTIONS: I18n
  Compiled on May 2 2011, 10:05:24.
  Port /dev/ttyS4
  Press CTRL-A Z for help on special keys
  Nothing further will be shown, no matter what keyboard input, etc. - except 
it will respond to CTL-A and Z, which are not modem responses

  IN EFAX-GTK :
  efax-0.9a: 21:27:23 opened /dev/ttyS4
  ( Then try to send and wait 5 minutes - no result, so press "Stop" )
  *** Stopping send/receive session ***
  efax-0.9a: 21:27:46 failed page /home/roger/Documents/Libre Office/Saddleback 
Labs Request.pdf.001

  I am a member of dialout and dip.

  Modem info:
  description: Serial controller product: 56K FaxModem Model 5610
  vendor: 3Com Corp, Modem Division
  physical id: 1 bus info: pci@:04:01.0
  version: 01 width: 32 bits clock: 33MHz
  capabilities: pm 16550 cap_list
  configuration: driver=serial latency=0
  resources: irq:17 ioport:d000(size=8 )

  roger@roger-desktop:~$ sudo wvdialconf
  [sudo] password for roger:
  Editing `/etc/wvdial.conf'.
  Scanning your serial ports for a modem.
  Modem Port Scan<*1>: S0 S1 S2 S3
  ttyS4<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
  ttyS4<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud
  ttyS4<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
  Modem Port Scan<*1>: S5 S6 S7 S8
  Modem Port Scan<*1>: S9 S10 S11 S12 S13 S14 S15 S16
  Modem Port Scan<*1>: S17 S18 S19 S20 S21 S22 S23 S24
  Modem Port Scan<*1>: S25 S26 S27 S28 S29 S30 S31
  Sorry, NO MODEM WAS DETECTED! Is it in use by another program? - ( my caps )
  Did you configure it properly with setserial?

  (  OK, so Ubuntu finds the modem, but doesn't find it !?!?!?  )

  Modem is at   ttyS4

  This is basically an internal US Robotics Sportster modem, NOT a
  Winmodem.

  roger@roger-desktop:~$ cat /var/log/syslog | grep modem
  Nov 9 13:26:47 roger-desktop modem-manager[919]:  ModemManager (version 
0.5.2.0) starting...
  Nov 9 13:26:47 roger-desktop modem-manager[919]:  Loaded plugin SimTech
  Nov 9 13:26:47 roger-desktop modem-manager[919]:  Loaded plugin MotoC
  Nov 9 13:26:47 roger-desktop modem-manager[919]:  Loaded plugin 
Ericsson MBM
  Nov 9 13:26:47 roger-desktop modem-manager[919]:  Loaded plugin ZTE
  Nov 9 13:26:47 roger-desktop modem-manager[919]:  Loaded plugin Linktop
  Nov 9 13:26:47 roger-desktop modem-manager[919]:  Loaded plugin AnyData
  Nov 9 13:26:47 roger-desktop modem-manager[919]:  Loaded plugin Option 
High-Speed
  Nov 9 13:26:47 roger-desktop modem-manager[919]:  Loaded plugin Wavecom
  Nov 9 13:26:47 roger-desktop modem-manager[919]:  Loaded plugin Sierra
  Nov 9 13:26:47 roger-desktop modem-manager[919]:  Loaded plugin Samsung
  Nov 9 13:26:47 roger-desktop modem-manager[919]:  Loaded plugin Novatel
  Nov 9 13:26:47 roger-desktop modem-manager[919]:  Loaded plugin Generic
  Nov 9 13:26:47 roger-desktop modem-manager[919]:  Loaded plugin Huawei
  Nov 9 13:26:47 roger-desktop modem-manager[919]:  Loaded plugin 
Longcheer
  Nov 9 13:26:47 roger-desktop modem-manager[919]:  Loaded plugin X

[Desktop-packages] [Bug 1065578] Re: GIMP-Unity-Integration needs to be improved

[Thomas Hotz]

** Description changed:

  Unlike other applications GIMP don't open maximised if it is closed
- maximised.
+ maximised. This happens in the one-window-mode.
  
  When reopened after being closed maximised, the program window is too
  large for the screen space available and extends below the bottom edge
  of the screen. This was confirmed at least for GIMP.
  
  This happens at least for me with a monitor resolution of 1366 x 768.
  
  ProblemType: Bug
  DistroRelease: Ubuntu 12.10
  Package: gimp 2.8.2-1ubuntu1
  ProcVersionSignature: Ubuntu 3.5.0-17.28-generic 3.5.5
  Uname: Linux 3.5.0-17-generic x86_64
  ApportVersion: 2.6.1-0ubuntu3
  Architecture: amd64
  Date: Thu Oct 11 18:30:20 2012
  InstallationMedia: Ubuntu 12.10 "Quantal Quetzal" - Beta amd64 (20121011)
  SourcePackage: gimp
  UpgradeStatus: No upgrade log present (probably fresh install)

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to gimp in Ubuntu.
https://bugs.launchpad.net/bugs/1065578

Title:
  GIMP-Unity-Integration needs to be improved

Status in “compiz” package in Ubuntu:
  Confirmed
Status in “gimp” package in Ubuntu:
  Confirmed
Status in “unity” package in Ubuntu:
  Confirmed

Bug description:
  Unlike other applications GIMP don't open maximised if it is closed
  maximised. This happens in the one-window-mode.

  When reopened after being closed maximised, the program window is too
  large for the screen space available and extends below the bottom edge
  of the screen. This was confirmed at least for GIMP.

  This happens at least for me with a monitor resolution of 1366 x 768.

  ProblemType: Bug
  DistroRelease: Ubuntu 12.10
  Package: gimp 2.8.2-1ubuntu1
  ProcVersionSignature: Ubuntu 3.5.0-17.28-generic 3.5.5
  Uname: Linux 3.5.0-17-generic x86_64
  ApportVersion: 2.6.1-0ubuntu3
  Architecture: amd64
  Date: Thu Oct 11 18:30:20 2012
  InstallationMedia: Ubuntu 12.10 "Quantal Quetzal" - Beta amd64 (20121011)
  SourcePackage: gimp
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/compiz/+bug/1065578/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 682350] Re: Special characters in notes = unexpected behavior with links

[Alemann Massho]

This is also reported upstream, linking.

** Bug watch added: GNOME Bug Tracker #687181
   https://bugzilla.gnome.org/show_bug.cgi?id=687181

** Also affects: tomboy via
   https://bugzilla.gnome.org/show_bug.cgi?id=687181
   Importance: Unknown
   Status: Unknown

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to tomboy in Ubuntu.
https://bugs.launchpad.net/bugs/682350

Title:
  Special characters in notes = unexpected behavior with links

Status in Tomboy:
  Unknown
Status in “tomboy” package in Ubuntu:
  Confirmed

Bug description:
  Binary package hint: tomboy

  Using Tomboy 1.4.2 (but behaviour also present in previous releases)
  on Ubuntu 10.10 32bit.

  When a note contains a special character (such as < > ( ), etc), links in 
other notes become unlinked when text is added after the link.
  To reproduce:

  1. create a new note, name it: new note 1 <
  2. create another note, "new note 2", and in the body write "new note 1 <". 
The link to the first note appears, as expected. However, 
  3. still in "new note 2", write something on the same line, after the entered 
text: the link disappears.

To manage notifications about this bug go to:
https://bugs.launchpad.net/tomboy/+bug/682350/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 402268] Re: package tomboy 0.15.3-1 failed to install/upgrade: subprocess installed post-installation script returned error exit status 139

[Alemann Massho]

** Changed in: tomboy (Ubuntu)
   Status: New => Incomplete

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to tomboy in Ubuntu.
https://bugs.launchpad.net/bugs/402268

Title:
  package tomboy 0.15.3-1 failed to install/upgrade: subprocess
  installed post-installation script returned error exit status 139

Status in “tomboy” package in Ubuntu:
  Incomplete

Bug description:
  Binary package hint: tomboy

  1) Karmic Koala, 10.4

  2) All I did for the package update was sudo apt-get update && sudo
  apt-get upgrade.  That was done in a terminal while I was poking the
  web (facebook, specifically Mafia Wars which requires flash on some
  level or another..) with firefox.

  3) I expected it to install everything and move on.

  4) It didn't.

  ProblemType: Package
  Architecture: amd64
  Date: Tue Jul 21 10:15:17 2009
  DistroRelease: Ubuntu 9.10
  ErrorMessage: subprocess installed post-installation script returned error 
exit status 139
  NonfreeKernelModules: nvidia
  Package: tomboy 0.15.3-1
  ProcVersionSignature: Ubuntu 2.6.31-3.19-generic
  SourcePackage: tomboy
  Title: package tomboy 0.15.3-1 failed to install/upgrade: subprocess 
installed post-installation script returned error exit status 139
  Uname: Linux 2.6.31-3-generic x86_64

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/tomboy/+bug/402268/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 391931] Re: in karmic alpha, clicking and dragging a note to the desktop fails and prints out a weird looking string

[Alemann Massho]

I've never been able to reproduce this (tried on 9.10, 10.0412.10)
so I'm going to mark it invalid. Please reopen it if you disagree and
can still reproduce it.

** Changed in: tomboy (Ubuntu)
   Status: Confirmed => Invalid

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to tomboy in Ubuntu.
https://bugs.launchpad.net/bugs/391931

Title:
  in karmic alpha, clicking and dragging a note to the desktop fails and
  prints out a weird looking string

Status in Tomboy:
  New
Status in “tomboy” package in Ubuntu:
  Invalid

Bug description:
  Binary package hint: tomboy

  the only extra information I can think of is that karmic is
  continueally starting on display:1, due to the virtual box display
  plugin failing to load at boot.

  take a look at the screenshot.

  ProblemType: Bug
  Architecture: i386
  Date: Thu Jun 25 00:19:10 2009
  DistroRelease: Ubuntu 9.10
  Package: tomboy 0.15.0-0ubuntu1
  ProcEnviron:
   LANG=C
   SHELL=/bin/bash
  ProcVersionSignature: Ubuntu 2.6.30-10.12-generic
  SourcePackage: tomboy
  Uname: Linux 2.6.30-10-generic i686

To manage notifications about this bug go to:
https://bugs.launchpad.net/tomboy/+bug/391931/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 546658] Re: Spell Check should ignore acronyms

[Alemann Massho]

This has been released in Tomboy 1.12.

** Changed in: tomboy (Ubuntu)
   Status: Fix Committed => Fix Released

** Changed in: tomboy (Ubuntu)
 Assignee: (unassigned) => Alemann Massho (armistice-con)

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to tomboy in Ubuntu.
https://bugs.launchpad.net/bugs/546658

Title:
  Spell Check should ignore acronyms

Status in Tomboy:
  Fix Released
Status in “tomboy” package in Ubuntu:
  Fix Released

Bug description:
  Binary package hint: tomboy

  The spell checker in Tomboy should ignore ALL UPPERCASE words, since
  these are typically acronyms, and will likely not be present in the
  dictionary.  So many red squiggly underlines in notes on technical
  subjects is very distracting.

  Tomboy 1.0.0-0ubuntu2

  Ubuntu 9.10, 32 bit, up-to-date.

To manage notifications about this bug go to:
https://bugs.launchpad.net/tomboy/+bug/546658/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1011073] Re: NetworkManager submenus sometimes unpopulated

[Aaron Johnson]

This affects me as well. I am using a Acer Aspire 4752. Here is output
of lspci:

00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family 
DRAM Controller (rev 09)
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core 
Processor Family Integrated Graphics Controller (rev 09)
00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series 
Chipset Family MEI Controller #1 (rev 04)
00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family 
USB Enhanced Host Controller #2 (rev 04)
00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family 
High Definition Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI 
Express Root Port 1 (rev b4)
00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI 
Express Root Port 2 (rev b4)
00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI 
Express Root Port 4 (rev b4)
00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family 
USB Enhanced Host Controller #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation HM65 Express Chipset Family LPC 
Controller (rev 04)
00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 
6 port SATA AHCI Controller (rev 04)
00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus 
Controller (rev 04)
02:00.0 Network controller: Atheros Communications Inc. AR9287 Wireless Network 
Adapter (PCI-Express) (rev 01)
03:00.0 Ethernet controller: Broadcom Corporation NetLink BCM57785 Gigabit 
Ethernet PCIe (rev 10)
03:00.1 SD Host controller: Broadcom Corporation NetXtreme BCM57765 Memory Card 
Reader (rev 10)
03:00.2 System peripheral: Broadcom Corporation Device 16be (rev 10)
03:00.3 System peripheral: Broadcom Corporation Device 16bf (rev 10)

killing and relaunching nm-applet is the only way to get it working
again without having to logout... Please fix this soon :(

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to network-manager-applet in Ubuntu.
https://bugs.launchpad.net/bugs/1011073

Title:
  NetworkManager submenus sometimes unpopulated

Status in “network-manager-applet” package in Ubuntu:
  Triaged

Bug description:
  Submenus in Network Manager are sometimes unusable as they are not
  populated.  This happens both with the list of available networks and
  with the VPN list.  When the bug happens, it occurs for *both* the
  wireless submenu and the VPN menu.  I know there are entries for those
  submenus as I can see them with other network UI mechanisms.  The
  issue is intermittent.

  Expected:
  Dropping down the menu then hovering over the submenu trigger-point (example: 
"More networks") shows the additional expected entries (example: more wifi 
networks to choose from).

  Actual:
  Dropping down the menu and hovering over the submenu trigger displays a 
submenu but the submenu has nothing in it and is unusable.

  Ubuntu 12.04
  network-manager 0.9.4.0-0ubuntu4.1
  Apple Macbook Pro 8,1

  03:00.0 Network controller: Broadcom Corporation BCM4331 802.11a/b/g/n (rev 
02)
  02:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM57765 Gigabit 
Ethernet PCIe (rev 10)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/network-manager-applet/+bug/1011073/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 661507] Re: Segmentation fault while seeking flv videos

[Alemann Massho]

I'm not sure if we're ever going to really reproduce this -- the file is
no longer available on the internet. See
http://www.youtube.com/watch?v=xJzVhh4RDm8, the file's origin.
_However_, since the commit that fixed the problem was obviously made
(http://cgit.freedesktop.org/gstreamer/gst-plugins-
good/commit/?id=628816784f3c83e76d01ce558e655d34c2181ae9), and the
release shipped, I think that any person would reasonably conclude that
this bug is no longer extant in 12.10. I'm going ahead and solving this.

** Changed in: pitivi (Ubuntu)
   Status: Incomplete => Fix Released

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to pitivi in Ubuntu.
https://bugs.launchpad.net/bugs/661507

Title:
  Segmentation fault while seeking flv videos

Status in PiTiVi , Non-linear video editor:
  Fix Released
Status in “pitivi” package in Ubuntu:
  Fix Released

Bug description:
  Binary package hint: pitivi

  Hi, I was trying to load a flv video but pitivi crashed with a
  segmentation fault. I've attached the log made using your debug
  options.

  ProblemType: Bug
  DistroRelease: Ubuntu 10.10
  Package: pitivi 0.13.5-1ubuntu2
  ProcVersionSignature: Ubuntu 2.6.35-22.34-generic 2.6.35.4
  Uname: Linux 2.6.35-22-generic x86_64
  NonfreeKernelModules: fglrx wl
  Architecture: amd64
  Date: Sat Oct 16 00:03:33 2010
  InstallationMedia: Ubuntu 10.04 "Lucid Lynx" - Alpha amd64 (20100328)
  PackageArchitecture: all
  ProcEnviron:
   PATH=(custom, user)
   LANG=it_IT.utf8
   SHELL=/bin/bash
  SourcePackage: pitivi

To manage notifications about this bug go to:
https://bugs.launchpad.net/pitivi/+bug/661507/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1077564] [NEW] HUD is not working in LibreOffice Writer when opening a Writer document from Nautilus

[Rafael Jacobo Hidalgo Urbino]

Public bug reported:

Hi everybody. I have recently updated LibreOffice from quantal proposed 
repository. Now Libreoffice global menu works when opening a document file from 
Nautilus, so theses bugs are solved: 
 https://bugs.launchpad.net/bugs/1064962
https://bugs.launchpad.net/ubuntu/+source/libreoffice/+bug/1069736


Now, we have global menu when opening a document(odp, odt) from Nautilus, but 
in this case HUD does not work in LibreOffice Writer. The thing is that if I 
open a presentation in Writer from Nautilus I have global menu and HUD working.

But, if I open a text document from Nautilus in Writer, I hace global
menu, but HUD does not search nothing in Writer.

But, in Writer,  if I open a document from File-->Open..., in this case
I can use HUD, it works very well.

Step to see the bug.
1- Open a Writer document from Nautilus.
2- See that global menu is working.
3- Press ALT  to use HUD, input some search in HUD and you will see that its 
not working with LibreOffice Writer menu.

In LibreOffice Impress HUD works when opening a document from Nautilus.
Sorry about my English.

** Affects: libreoffice (Ubuntu)
 Importance: Undecided
 Status: New

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to libreoffice in Ubuntu.
https://bugs.launchpad.net/bugs/1077564

Title:
  HUD is not working in LibreOffice Writer when opening a Writer
  document from Nautilus

Status in “libreoffice” package in Ubuntu:
  New

Bug description:
  Hi everybody. I have recently updated LibreOffice from quantal proposed 
repository. Now Libreoffice global menu works when opening a document file from 
Nautilus, so theses bugs are solved: 
   https://bugs.launchpad.net/bugs/1064962
  https://bugs.launchpad.net/ubuntu/+source/libreoffice/+bug/1069736

  
  Now, we have global menu when opening a document(odp, odt) from Nautilus, but 
in this case HUD does not work in LibreOffice Writer. The thing is that if I 
open a presentation in Writer from Nautilus I have global menu and HUD working.

  But, if I open a text document from Nautilus in Writer, I hace global
  menu, but HUD does not search nothing in Writer.

  But, in Writer,  if I open a document from File-->Open..., in this
  case I can use HUD, it works very well.

  Step to see the bug.
  1- Open a Writer document from Nautilus.
  2- See that global menu is working.
  3- Press ALT  to use HUD, input some search in HUD and you will see that its 
not working with LibreOffice Writer menu.

  In LibreOffice Impress HUD works when opening a document from Nautilus.
  Sorry about my English.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/libreoffice/+bug/1077564/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1077559] Re: Scroll Bar Width is Too Narrow Uneasily Adjustable

[Lonnie Lee Best]

** Description changed:

  I've been using the Internet since 1993 before and during the first year
  browsers came out. Back then the scroll bars seemed as wide as your
  finger.
  
  As time has gone on, screen resolutions have continue to increase, but
  each time this happens the browsers scroll bar gets more and more narrow
  on the screen. It seems to maintain its pixel width, but at higher
  resolutions its physical width continues to narrow.
  
  At this point, I find myself wanting to enjoy higher resolutions, but at
  the same time, I want things to be bigger at those higher resolutions.
  
  It has finally gotten to the point, that I find the width of scroll bars too 
narrow, requiring too fine-grained of a mouse-control-effort for simple web 
page navigation, such as:
  1) Clicking the scroll-bar's up button
  2) Clicking the scroll-bar's down button
  3) Dragging the scroll-bar's slider.
  
  Although a scroll-wheel is a helpful workaround, it remains an issue
  that the scroll-bar itself continues to require ever increasing fine-
  grained-effort to use. It is finally gotten to the point that I consider
  it a cumbersome control.
  
  I suggest doubling its size by default in future updates and releases of
  Firefox. Or at lease making the scroll-bar easy to scale-adjust its size
  (without the user having to understand CSS style sheet modification).
  Perhaps it would be good to make the scroll-bar right-clickable and
  providing a "Adjust Width" option in its context menu.
  
  Many desktop applications could learn a thing or two from touch screen
  interfaces. Notice how bluntly (widely) they make their buttons and
  selectable options. They do it out of necessity because they know a
  person is going to be using their finger to select that option. However,
  even with a mouse, the bigger something is, the easier it is to select.
  Just because a mouse-cursor comes to a fine point, doesn't mean that
  controls ought to be barely bigger than that point.
  
  I believe we have finally crossed a threshold. While before, we've
  always been trying to maximize the browser's screen real estate, now
  we've got plenty of width at higher resolutions, and it is time to
  increase the width of scrollbars and make them require less fine-
- grained-mouse-control to use.
+ grained-mouse-control-effort to use.
  
  ProblemType: Bug
  DistroRelease: Ubuntu 12.10
  Package: firefox 16.0.2+build1-0ubuntu0.12.10.1
  ProcVersionSignature: Ubuntu 3.5.0-18.29-generic 3.5.7
  Uname: Linux 3.5.0-18-generic x86_64
  AddonCompatCheckDisabled: False
  ApportVersion: 2.6.1-0ubuntu6
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC2:  lonnie 2197 F pulseaudio
   /dev/snd/controlC0:  lonnie 2197 F pulseaudio
  BuildID: 20121025212310
  CRDA: Error: command ['iw', 'reg', 'get'] failed with exit code 1: nl80211 
not found.
  Channel: Unavailable
  Date: Sat Nov 10 22:42:45 2012
  ForcedLayersAccel: False
  IfupdownConfig:
   # interfaces(5) file used by ifup(8) and ifdown(8)
   auto lo
   iface lo inet loopback
  InstallationDate: Installed on 2012-10-19 (23 days ago)
  InstallationMedia: Ubuntu 12.10 "Quantal Quetzal" - Release amd64 (20121017.5)
  IpRoute:
   default via 192.168.77.1 dev eth0  proto static
   169.254.0.0/16 dev eth0  scope link  metric 1000
   192.168.77.0/24 dev eth0  proto kernel  scope link  src 192.168.77.246  
metric 1
  IwConfig:
   eth0  no wireless extensions.
  
   lono wireless extensions.
  MarkForUpload: True
  PrefSources:
   prefs.js
   
[Profile]/extensions/{8f8fe09b-0bd3-4470-bc1b-8cad42b8203a}/defaults/preferences/prefs.js
   
[Profile]/extensions/{b9db16a4-6edc-47ec-a1f4-b86292ed211d}/defaults/preferences/prefs-dwhelper.js
  ProcEnviron:
   TERM=xterm
   PATH=(custom, no user)
   XDG_RUNTIME_DIR=
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  Profiles: Profile0 (Default) - LastVersion=16.0.2/20121025212310 (In use)
  RelatedPackageVersions:
   icedtea-7-plugin  1.3-1ubuntu1.1
   google-talkplugin 3.10.2.0-1
   rhythmbox-mozilla 2.97-1ubuntu5
   totem-mozilla 3.4.3-0ubuntu4
  RfKill:
  
  RunningIncompatibleAddons: False
  SourcePackage: firefox
  UpgradeStatus: No upgrade log present (probably fresh install)
  WifiSyslog:
  
  dmi.bios.date: 11/26/2008
  dmi.bios.vendor: Dell Inc.
  dmi.bios.version: A04
  dmi.board.name: 0P792H
  dmi.board.vendor: Dell Inc.
  dmi.board.version: A04
  dmi.chassis.type: 8
  dmi.chassis.vendor: Dell Inc.
  dmi.chassis.version: A04
  dmi.modalias: 
dmi:bvnDellInc.:bvrA04:bd11/26/2008:svnDellInc.:pnStudio1737:pvrA04:rvnDellInc.:rn0P792H:rvrA04:cvnDellInc.:ct8:cvrA04:
  dmi.product.name: Studio 1737
  dmi.product.version: A04
  dmi.sys.vendor: Dell Inc.

** Summary changed:

- Scroll Bar Width is Too Narrow Uneasily Adjustable
+ Scroll Bar Width is Too Narrow - Uneasily Adjustable

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscrib

[Desktop-packages] [Bug 1077563] [NEW] [nouveau] Screen tearing, graphical flickering with opened Dash

[hadobac]

Public bug reported:

I'm using Ubuntu 12.10 Quantal, on my Vostro 1400 with Nvidia GeForce
8400 GS.

Since installation, I switch to Nvidia driver and it works alright, but
the windows performance is choppy, especially windows animation effects.
Disabling Sync to VBlank and compression make it works a bit smoother,
but still unacceptable. At least there are no screen tearing and stuff.

I decide to give Nouveau driver, holy god the windows compiz effects are
smooth butter.

- What I expect to happen: Dash open normnally and smoothly
- What happened instead: screen tearing, graphical flickering unless I close 
Dash. The libgl1-mesa-dri-experimental package does not help.
http://i.stack.imgur.com/m8Y5H.jpg

http://i.stack.imgur.com/aJ8B0.png

Ubuntu 12.10 Quantal
xserver-xorg-video-nouveau:
  Installed: 1:1.0.2-0ubuntu3
  Candidate: 1:1.0.2-0ubuntu3
  Version table:
 *** 1:1.0.2-0ubuntu3 0
500 http://au.archive.ubuntu.com/ubuntu/ quantal/main amd64 Packages
100 /var/lib/dpkg/status

ProblemType: Bug
DistroRelease: Ubuntu 12.10
Package: xserver-xorg-video-nouveau 1:1.0.2-0ubuntu3
ProcVersionSignature: Ubuntu 3.5.0-17.28-generic 3.5.5
Uname: Linux 3.5.0-17-generic x86_64
NonfreeKernelModules: wl
.tmp.unity.support.test.0:
 
ApportVersion: 2.6.1-0ubuntu6
Architecture: amd64
CompizPlugins: No value set for 
`/apps/compiz-1/general/screen0/options/active_plugins'
CompositorRunning: compiz
Date: Sun Nov 11 12:35:50 2012
DistUpgraded: Fresh install
DistroCodename: quantal
DistroVariant: ubuntu
DkmsStatus: bcmwl, 5.100.82.112+bdcom, 3.5.0-17-generic, x86_64: installed
ExtraDebuggingInterest: Yes, if not too technical
GraphicsCard:
 NVIDIA Corporation G86 [GeForce 8400M GS] [10de:0427] (rev a1) (prog-if 00 
[VGA controller])
   Subsystem: Dell Device [1028:0227]
InstallationDate: Installed on 2012-10-19 (22 days ago)
InstallationMedia: Ubuntu 12.10 "Quantal Quetzal" - Release amd64 (20121017.5)
MachineType: Dell Inc. Vostro 1400
MarkForUpload: True
ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.5.0-17-generic 
root=UUID=d6c4d7b9-b174-46a6-bfa7-842a0ef0fe89 ro quiet splash vt.handoff=7
SourcePackage: xserver-xorg-video-nouveau
UpgradeStatus: No upgrade log present (probably fresh install)
dmi.bios.date: 07/10/2008
dmi.bios.vendor: Dell Inc.
dmi.bios.version: A09
dmi.board.name: 0TT361
dmi.board.vendor: Dell Inc.
dmi.chassis.type: 8
dmi.chassis.vendor: Dell Inc.
dmi.modalias: 
dmi:bvnDellInc.:bvrA09:bd07/10/2008:svnDellInc.:pnVostro1400:pvr:rvnDellInc.:rn0TT361:rvr:cvnDellInc.:ct8:cvr:
dmi.product.name: Vostro 1400
dmi.sys.vendor: Dell Inc.
version.compiz: compiz 1:0.9.8.4+bzr3407-0ubuntu1
version.ia32-libs: ia32-libs 20090808ubuntu36
version.libdrm2: libdrm2 2.4.39-0ubuntu1
version.libgl1-mesa-dri: libgl1-mesa-dri 9.0-0ubuntu1
version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental 9.0-0ubuntu1
version.libgl1-mesa-glx: libgl1-mesa-glx 9.0-0ubuntu1
version.xserver-xorg-core: xserver-xorg-core 2:1.13.0-0ubuntu6
version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.7.3-0ubuntu2
version.xserver-xorg-video-ati: xserver-xorg-video-ati 
1:6.99.99~git20120913.8637f772-0ubuntu1
version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.20.9-0ubuntu2
version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.2-0ubuntu3

** Affects: xserver-xorg-video-nouveau (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: amd64 apport-bug compiz-0.9 quantal running-unity ubuntu

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xserver-xorg-video-nouveau in Ubuntu.
https://bugs.launchpad.net/bugs/1077563

Title:
  [nouveau] Screen tearing, graphical flickering with opened Dash

Status in “xserver-xorg-video-nouveau” package in Ubuntu:
  New

Bug description:
  I'm using Ubuntu 12.10 Quantal, on my Vostro 1400 with Nvidia GeForce
  8400 GS.

  Since installation, I switch to Nvidia driver and it works alright,
  but the windows performance is choppy, especially windows animation
  effects. Disabling Sync to VBlank and compression make it works a bit
  smoother, but still unacceptable. At least there are no screen tearing
  and stuff.

  I decide to give Nouveau driver, holy god the windows compiz effects
  are smooth butter.

  - What I expect to happen: Dash open normnally and smoothly
  - What happened instead: screen tearing, graphical flickering unless I close 
Dash. The libgl1-mesa-dri-experimental package does not help.
  http://i.stack.imgur.com/m8Y5H.jpg

  http://i.stack.imgur.com/aJ8B0.png

  Ubuntu 12.10 Quantal
  xserver-xorg-video-nouveau:
Installed: 1:1.0.2-0ubuntu3
Candidate: 1:1.0.2-0ubuntu3
Version table:
   *** 1:1.0.2-0ubuntu3 0
  500 http://au.archive.ubuntu.com/ubuntu/ quantal/main amd64 Packages
  100 /var/lib/dpkg/status

  ProblemType: Bug
  DistroRelease: Ubuntu 12.10
  Package: xserver-xorg-video-nouveau 1:1.0.2-0ubuntu3
  ProcVersionSignature: Ubuntu 3.5.0-17.28-gen

[Desktop-packages] [Bug 1069736] Re: No Global menu in LibreOffice Impress on 12.10

[Rafael Jacobo Hidalgo Urbino]

*** This bug is a duplicate of bug 1064962 ***
https://bugs.launchpad.net/bugs/1064962

Hi people, this bug has been solved recently and the update is in the quantal 
proposed repository, see this:
https://bugs.launchpad.net/ubuntu/+source/libreoffice/+bug/1064962/comments/108


But now, we have global menu when opening a document(odp, odt) from Nautilus, 
but in this case HUD does not work in LibreOffice Writer.
This is the explanition:

I have updated LibreOffice to the proposed package, now I have global
menu when opening documents from Nautilus, but in this case HUD is not
working in LibreOffice Writer. HUD in this case is not able to search
nothing in LibreOffice menu.

But, if I open Writer, then I open a document from File-->Open..., in
this case I can use HUD, it works very well.

Step to see the bug.
1- Open a Writer document from Nautilus.
2- See that global menu is working.
3- Press ALT  to use HUD, input some search in HUD and yo will see that itś ot 
working with LibreOffice menu.

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to libreoffice in Ubuntu.
https://bugs.launchpad.net/bugs/1069736

Title:
  No Global menu in LibreOffice Impress on 12.10

Status in “libreoffice” package in Ubuntu:
  Confirmed

Bug description:
  Opening LibreOffice impress, there is no globalmenu available in the
  window bar at the top.

  Menu appears fine in LibreOffice Writer and Calc.

  ProblemType: Bug
  DistroRelease: Ubuntu 12.10
  Package: libreoffice-impress 1:3.6.2~rc2-0ubuntu3
  ProcVersionSignature: Ubuntu 3.5.0-17.28-generic 3.5.5
  Uname: Linux 3.5.0-17-generic x86_64
  ApportVersion: 2.6.1-0ubuntu3
  Architecture: amd64
  Date: Mon Oct 22 11:08:20 2012
  InstallationMedia: Ubuntu 12.04.1 LTS "Precise Pangolin" - Release amd64 
(20120823.1)
  ProcEnviron:
   LANGUAGE=en_GB:en
   PATH=(custom, no user)
   XDG_RUNTIME_DIR=
   LANG=en_GB.UTF-8
   SHELL=/bin/bash
  SourcePackage: libreoffice
  UpgradeStatus: Upgraded to quantal on 2012-10-18 (3 days ago)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/libreoffice/+bug/1069736/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1064962] Re: [SRU] Global menubar items do not work when opening a document directly from nautilus with no LibreOffice instance running

[Rafael Jacobo Hidalgo Urbino]

I have updated LibreOffice to the proposed package, now I have global
menu when opening documents from Nautilus, but in this case HUD is not
working in LibreOffice. HUD in this case is not able to search nothing
in LibreOffice menu.

But, if I open Writer, then I open a document from File-->Open..., in
this case I can use HUD, it works very well.

Step to see the bug.
1- Open a document from Nautilus.
2- See that global menu is working.
3- Press ALT  to use HUD, input some search in HUD and yo will see that itś ot 
working with LibreOffice menu.

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to libreoffice in Ubuntu.
https://bugs.launchpad.net/bugs/1064962

Title:
  [SRU] Global menubar items do not work when opening a document
  directly from nautilus with no LibreOffice instance running

Status in BAMF Application Matching Framework:
  Confirmed
Status in LibreOffice Productivity Suite:
  Won't Fix
Status in The Application Menu:
  Confirmed
Status in “bamf” package in Ubuntu:
  Confirmed
Status in “indicator-appmenu” package in Ubuntu:
  Confirmed
Status in “libreoffice” package in Ubuntu:
  Fix Committed
Status in “bamf” source package in Quantal:
  Confirmed
Status in “indicator-appmenu” source package in Quantal:
  Confirmed
Status in “libreoffice” source package in Quantal:
  Fix Committed

Bug description:
  [IMPACT]

   * there is no menu available in some scenarios of opening LibreOffice
   * makes LibreOffice essentially unusable when opening a docuemnt directly

  [TESTCASE]

   * open a existing file from nautilus -> no menu in a unity session

  [Regression Potential]

   * changes are to the menu code integration, possible regressions will be 
there
   * package has been available for user testing 
https://launchpad.net/~bjoern-michaelsen/+archive/libreoffice-quantaltest-20120601
 since 2012-10-26 without any reported regressions
   * see comment 74 for realworld enduser testing

  ---
  pre-SRU description details:

  1) Have no instance of LibreOffice running
  2) open a document by double-clicking it in nautilus
  3) new window has no menu
  4) unfocusing/refocusing (e.g. by pressing F7 to bring up the spelling 
dialog) makes the menu appear

  WORKAROUND: minimize and restore the LibreOffice window
  (more permanent workaround, disable the global menu by removing the package 
"libreoffice-gtk").

  ProblemType: Bug
  DistroRelease: Ubuntu 12.10
  Package: libreoffice-gtk 1:3.6.2~rc2-0ubuntu3
  ProcVersionSignature: Ubuntu 3.5.0-17.28-generic 3.5.5
  Uname: Linux 3.5.0-17-generic x86_64
  NonfreeKernelModules: nvidia
  ApportVersion: 2.6.1-0ubuntu2
  Architecture: amd64
  Date: Wed Oct 10 11:48:20 2012
  InstallationMedia: Ubuntu 11.04 "Natty Narwhal" - Release amd64 (20110427.1)
  SourcePackage: libreoffice
  UpgradeStatus: Upgraded to quantal on 2012-09-30 (9 days ago)

  original description:
  In writer, none of the menubar items appear to work.  Example:

  * Open new document in Writer
  * Type some text and highlight it
  * Try Edit->Cut
  >> Nothing happens
  * Try Format->Change chase->UPPERCASE
  >> Nothing happens!
  workaround: restart your session after update

To manage notifications about this bug go to:
https://bugs.launchpad.net/bamf/+bug/1064962/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1077561] [NEW] flash movies won't leave fullscreen mode with esc key

[Benjamin J Norton]

Public bug reported:

When watching flash movies I click on the full screen button it displays
a message saying to leave full screen hit the escape key, however it
doesn't immediately to this, it requires clicking on the screen,
sometimes multiple times, then hitting escape in order to get the flash
movie to successfully leave full screen mode.

Ubuntu 12.04 "Precise" 64 bit using Firefox 16.0.2 with Flash Player
version 11.2.202.251

** Affects: firefox (Ubuntu)
 Importance: Undecided
 Status: New

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to firefox in Ubuntu.
https://bugs.launchpad.net/bugs/1077561

Title:
  flash movies won't leave fullscreen mode with esc key

Status in “firefox” package in Ubuntu:
  New

Bug description:
  When watching flash movies I click on the full screen button it
  displays a message saying to leave full screen hit the escape key,
  however it doesn't immediately to this, it requires clicking on the
  screen, sometimes multiple times, then hitting escape in order to get
  the flash movie to successfully leave full screen mode.

  Ubuntu 12.04 "Precise" 64 bit using Firefox 16.0.2 with Flash Player
  version 11.2.202.251

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/firefox/+bug/1077561/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1071345] Re: empathy contacts list compact mode is missing in 3.6

[Akila Wajirasena]

Affects me also, and there is another bug on this; 1049598

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to empathy in Ubuntu.
https://bugs.launchpad.net/bugs/1071345

Title:
  empathy contacts list compact mode is missing in 3.6

Status in Chat app, and Telepathy user interface:
  New
Status in “empathy” package in Ubuntu:
  Triaged

Bug description:
  Prior to upgrading to quantal, Empathy had a compact mode for the
  contacts list.  This would show each contact on a single line that was
  just tall enough to display the contact's username.  This way, I would
  be able to use my high resolution monitor to view all of my online
  contacts simultaneously.

  Under Empathy 3.6 on quantal, the option for a compact mode
  disappeared and each contact in the list takes about 3 times the
  vertical space needed to display the contact's username.  Now even
  with my high resolution montor, I can only view about 1/3 of my online
  contacts at a time.

  Please bring back the compact mode.

  ProblemType: Bug
  DistroRelease: Ubuntu 12.10
  Package: empathy 3.6.0.3-0ubuntu1
  ProcVersionSignature: Ubuntu 3.5.0-17.28-generic 3.5.5
  Uname: Linux 3.5.0-17-generic x86_64
  ApportVersion: 2.6.1-0ubuntu6
  Architecture: amd64
  Date: Thu Oct 25 10:43:27 2012
  InstallationDate: Installed on 2011-08-29 (422 days ago)
  InstallationMedia: Ubuntu 11.04 "Natty Narwhal" - Release amd64 (20110427.1)
  MarkForUpload: True
  SourcePackage: empathy
  UpgradeStatus: Upgraded to quantal on 2012-10-22 (2 days ago)

To manage notifications about this bug go to:
https://bugs.launchpad.net/empathy/+bug/1071345/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1077559] Re: Scroll Bar Width is Too Narrow Uneasily Adjustable

[Lonnie Lee Best]

** Description changed:

  I've been using the Internet since 1993 before and during the first year
  browsers came out. Back then the scroll bars seemed as wide as your
  finger.
  
  As time has gone on, screen resolutions have continue to increase, but
  each time this happens the browsers scroll bar gets more and more narrow
  on the screen. It seems to maintain its pixel width, but at higher
  resolutions its physical width continues to narrow.
  
  At this point, I find myself wanting to enjoy higher resolutions, but at
  the same time, I want things to be bigger at those higher resolutions.
  
  It has finally gotten to the point, that I find the width of scroll bars too 
narrow, requiring too fine-grained of a mouse-control-effort for simple web 
page navigation, such as:
  1) Clicking the scroll-bar's up button
  2) Clicking the scroll-bar's down button
  3) Dragging the scroll-bar's slider.
  
  Although a scroll-wheel is a helpful workaround, it remains an issue
  that the scroll-bar itself continues to require ever increasing fine-
  grained-effort to use. It is finally gotten to the point that I consider
  it a cumbersome control.
  
  I suggest doubling its size by default in future updates and releases of
  Firefox. Or at lease making the scroll-bar easy to scale-adjust its size
  (without the user having to understand CSS style sheet modification).
  Perhaps it would be good to make the scroll-bar right-clickable and
  providing a "Adjust Width" option in its context menu.
  
  Many desktop applications could learn a thing or two from touch screen
  interfaces. Notice how bluntly (widely) they make their buttons and
  selectable options. They do it out of necessity because they know a
  person is going to be using their finger to select that option. However,
  even with a mouse, the bigger something is, the easier it is to select.
- Just because a mouse-cursor come to a fine point, doesn't mean that
+ Just because a mouse-cursor comes to a fine point, doesn't mean that
  controls ought to be barely bigger than that point.
  
- I believe we have finally crossed threshold. While before, we've always
- been trying to maximize the browser's screen real estate, now we've got
- plenty of width there, and it is time to increase the width of
- scrollbars and make them require less fine-grained-mouse-control to use.
+ I believe we have finally crossed a threshold. While before, we've
+ always been trying to maximize the browser's screen real estate, now
+ we've got plenty of width at higher resolutions, and it is time to
+ increase the width of scrollbars and make them require less fine-
+ grained-mouse-control to use.
  
  ProblemType: Bug
  DistroRelease: Ubuntu 12.10
  Package: firefox 16.0.2+build1-0ubuntu0.12.10.1
  ProcVersionSignature: Ubuntu 3.5.0-18.29-generic 3.5.7
  Uname: Linux 3.5.0-18-generic x86_64
  AddonCompatCheckDisabled: False
  ApportVersion: 2.6.1-0ubuntu6
  Architecture: amd64
  AudioDevicesInUse:
-  USERPID ACCESS COMMAND
-  /dev/snd/controlC2:  lonnie 2197 F pulseaudio
-  /dev/snd/controlC0:  lonnie 2197 F pulseaudio
+  USERPID ACCESS COMMAND
+  /dev/snd/controlC2:  lonnie 2197 F pulseaudio
+  /dev/snd/controlC0:  lonnie 2197 F pulseaudio
  BuildID: 20121025212310
  CRDA: Error: command ['iw', 'reg', 'get'] failed with exit code 1: nl80211 
not found.
  Channel: Unavailable
  Date: Sat Nov 10 22:42:45 2012
  ForcedLayersAccel: False
  IfupdownConfig:
-  # interfaces(5) file used by ifup(8) and ifdown(8)
-  auto lo
-  iface lo inet loopback
+  # interfaces(5) file used by ifup(8) and ifdown(8)
+  auto lo
+  iface lo inet loopback
  InstallationDate: Installed on 2012-10-19 (23 days ago)
  InstallationMedia: Ubuntu 12.10 "Quantal Quetzal" - Release amd64 (20121017.5)
  IpRoute:
-  default via 192.168.77.1 dev eth0  proto static 
-  169.254.0.0/16 dev eth0  scope link  metric 1000 
-  192.168.77.0/24 dev eth0  proto kernel  scope link  src 192.168.77.246  
metric 1
+  default via 192.168.77.1 dev eth0  proto static
+  169.254.0.0/16 dev eth0  scope link  metric 1000
+  192.168.77.0/24 dev eth0  proto kernel  scope link  src 192.168.77.246  
metric 1
  IwConfig:
-  eth0  no wireless extensions.
-  
-  lono wireless extensions.
+  eth0  no wireless extensions.
+ 
+  lono wireless extensions.
  MarkForUpload: True
  PrefSources:
-  prefs.js
-  
[Profile]/extensions/{8f8fe09b-0bd3-4470-bc1b-8cad42b8203a}/defaults/preferences/prefs.js
-  
[Profile]/extensions/{b9db16a4-6edc-47ec-a1f4-b86292ed211d}/defaults/preferences/prefs-dwhelper.js
+  prefs.js
+  
[Profile]/extensions/{8f8fe09b-0bd3-4470-bc1b-8cad42b8203a}/defaults/preferences/prefs.js
+  
[Profile]/extensions/{b9db16a4-6edc-47ec-a1f4-b86292ed211d}/defaults/preferences/prefs-dwhelper.js
  ProcEnviron:
-  TERM=xterm
-  PATH=(custom, no user)
-  XDG_RUNTIME_DIR=
-  LANG=en_US.UTF-8
-  SHELL=/bin/bash
+  TERM=xterm
+  PATH=(custom, no user)
+  XDG_RUNTIME_DIR=

[Desktop-packages] [Bug 1077559] [NEW] Scroll Bar Width is Too Narrow Uneasily Adjustable

[Lonnie Lee Best]

Public bug reported:

I've been using the Internet since 1993 before and during the first year
browsers came out. Back then the scroll bars seemed as wide as your
finger.

As time has gone on, screen resolutions have continue to increase, but
each time this happens the browsers scroll bar gets more and more narrow
on the screen. It seems to maintain its pixel width, but at higher
resolutions its physical width continues to narrow.

At this point, I find myself wanting to enjoy higher resolutions, but at
the same time, I want things to be bigger at those higher resolutions.

It has finally gotten to the point, that I find the width of scroll bars too 
narrow, requiring too fine-grained of a mouse-control-effort for simple web 
page navigation, such as:
1) Clicking the scroll-bar's up button
2) Clicking the scroll-bar's down button
3) Dragging the scroll-bar's slider.

Although a scroll-wheel is a helpful workaround, it remains an issue
that the scroll-bar itself continues to require ever increasing fine-
grained-effort to use. It is finally gotten to the point that I consider
it a cumbersome control.

I suggest doubling its size by default in future updates and releases of
Firefox. Or at lease making the scroll-bar easy to scale-adjust its size
(without the user having to understand CSS style sheet modification).
Perhaps it would be good to make the scroll-bar right-clickable and
providing a "Adjust Width" option in its context menu.

Many desktop applications could learn a thing or two from touch screen
interfaces. Notice how bluntly (widely) they make their buttons and
selectable options. They do it out of necessity because they know a
person is going to be using their finger to select that option. However,
even with a mouse, the bigger something is, the easier it is to select.
Just because a mouse-cursor comes to a fine point, doesn't mean that
controls ought to be barely bigger than that point.

I believe we have finally crossed a threshold. While before, we've
always been trying to maximize the browser's screen real estate, now
we've got plenty of width at higher resolutions, and it is time to
increase the width of scrollbars and make them require less fine-
grained-mouse-control to use.

ProblemType: Bug
DistroRelease: Ubuntu 12.10
Package: firefox 16.0.2+build1-0ubuntu0.12.10.1
ProcVersionSignature: Ubuntu 3.5.0-18.29-generic 3.5.7
Uname: Linux 3.5.0-18-generic x86_64
AddonCompatCheckDisabled: False
ApportVersion: 2.6.1-0ubuntu6
Architecture: amd64
AudioDevicesInUse:
 USERPID ACCESS COMMAND
 /dev/snd/controlC2:  lonnie 2197 F pulseaudio
 /dev/snd/controlC0:  lonnie 2197 F pulseaudio
BuildID: 20121025212310
CRDA: Error: command ['iw', 'reg', 'get'] failed with exit code 1: nl80211 not 
found.
Channel: Unavailable
Date: Sat Nov 10 22:42:45 2012
ForcedLayersAccel: False
IfupdownConfig:
 # interfaces(5) file used by ifup(8) and ifdown(8)
 auto lo
 iface lo inet loopback
InstallationDate: Installed on 2012-10-19 (23 days ago)
InstallationMedia: Ubuntu 12.10 "Quantal Quetzal" - Release amd64 (20121017.5)
IpRoute:
 default via 192.168.77.1 dev eth0  proto static
 169.254.0.0/16 dev eth0  scope link  metric 1000
 192.168.77.0/24 dev eth0  proto kernel  scope link  src 192.168.77.246  metric 
1
IwConfig:
 eth0  no wireless extensions.

 lono wireless extensions.
MarkForUpload: True
PrefSources:
 prefs.js
 [Profile]/extensions/{8f8fe09b-0bd3-4470-bc1b-8cad42b8203a}/defaults/preferences/prefs.js
 [Profile]/extensions/{b9db16a4-6edc-47ec-a1f4-b86292ed211d}/defaults/preferences/prefs-dwhelper.js
ProcEnviron:
 TERM=xterm
 PATH=(custom, no user)
 XDG_RUNTIME_DIR=
 LANG=en_US.UTF-8
 SHELL=/bin/bash
Profiles: Profile0 (Default) - LastVersion=16.0.2/20121025212310 (In use)
RelatedPackageVersions:
 icedtea-7-plugin  1.3-1ubuntu1.1
 google-talkplugin 3.10.2.0-1
 rhythmbox-mozilla 2.97-1ubuntu5
 totem-mozilla 3.4.3-0ubuntu4
RfKill:

RunningIncompatibleAddons: False
SourcePackage: firefox
UpgradeStatus: No upgrade log present (probably fresh install)
WifiSyslog:

dmi.bios.date: 11/26/2008
dmi.bios.vendor: Dell Inc.
dmi.bios.version: A04
dmi.board.name: 0P792H
dmi.board.vendor: Dell Inc.
dmi.board.version: A04
dmi.chassis.type: 8
dmi.chassis.vendor: Dell Inc.
dmi.chassis.version: A04
dmi.modalias: 
dmi:bvnDellInc.:bvrA04:bd11/26/2008:svnDellInc.:pnStudio1737:pvrA04:rvnDellInc.:rn0P792H:rvrA04:cvnDellInc.:ct8:cvrA04:
dmi.product.name: Studio 1737
dmi.product.version: A04
dmi.sys.vendor: Dell Inc.

** Affects: firefox (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: amd64 apport-bug quantal running-unity

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to firefox in Ubuntu.
https://bugs.launchpad.net/bugs/1077559

Title:
  Scroll Bar Width is Too Narrow Uneasily Adjustable

Status in “firefox” package in Ubuntu:
  New

Bug description:
  I've been using the Internet since 1993 before and during the first
  year

[Desktop-packages] [Bug 1075897] Re: Session log out forced by Ubuntu One

[deadmantfa]

Yes, but when i use default backup program in ubuntu i try logging into
ubuntu one it crashes does the same thing mentioned earlier. So i guess
some how ubuntu one is triggering it

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xorg in Ubuntu.
https://bugs.launchpad.net/bugs/1075897

Title:
  Session log out forced by Ubuntu One

Status in X.Org X server:
  New
Status in “xorg” package in Ubuntu:
  New

Bug description:
  When ever i goto ubuntu one on the system and click on any button, i
  get logged out and all the applications are closed as if i restarted
  the system

  ProblemType: Bug
  DistroRelease: Ubuntu 12.10
  Package: xorg 1:7.7+1ubuntu4
  ProcVersionSignature: Ubuntu 3.5.0-18.29-generic 3.5.7
  Uname: Linux 3.5.0-18-generic x86_64
  NonfreeKernelModules: nvidia
  .proc.driver.nvidia.gpus.0: Error: [Errno 21] Is a directory: 
'/proc/driver/nvidia/gpus/0'
  .proc.driver.nvidia.registry: Binary: ""
  .proc.driver.nvidia.version:
   NVRM version: NVIDIA UNIX x86_64 Kernel Module  304.43  Sun Aug 19 20:14:03 
PDT 2012
   GCC version:  gcc version 4.7.2 (Ubuntu/Linaro 4.7.2-2ubuntu1)
  .tmp.unity.support.test.0:
   
  ApportVersion: 2.6.1-0ubuntu6
  Architecture: amd64
  CompizPlugins: No value set for 
`/apps/compiz-1/general/screen0/options/active_plugins'
  CompositorRunning: compiz
  Date: Wed Nov  7 13:25:38 2012
  DistUpgraded: Fresh install
  DistroCodename: quantal
  DistroVariant: ubuntu
  DkmsStatus:
   nvidia-current, 304.43, 3.5.0-17-generic, x86_64: installed
   nvidia-current, 304.43, 3.5.0-18-generic, x86_64: installed
  ExtraDebuggingInterest: Yes, including running git bisection searches
  GraphicsCard:
   NVIDIA Corporation G98M [GeForce G105M] [10de:0a68] (rev a2) (prog-if 00 
[VGA controller])
 Subsystem: Hewlett-Packard Company Device [103c:3659]
  InstallationDate: Installed on 2012-10-22 (16 days ago)
  InstallationMedia: Ubuntu 12.10 "Quantal Quetzal" - Release amd64 (20121017.5)
  MachineType: Hewlett-Packard HP Pavilion dv6 Notebook PC
  MarkForUpload: True
  ProcEnviron:
   TERM=xterm
   PATH=(custom, no user)
   XDG_RUNTIME_DIR=
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.5.0-18-generic 
root=UUID=94DCE971DCE94E54 loop=/hostname/disks/root.disk ro quiet splash
  SourcePackage: xorg
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 05/17/2010
  dmi.bios.vendor: Hewlett-Packard
  dmi.bios.version: F.1C
  dmi.board.asset.tag: Base Board Asset Tag
  dmi.board.name: 3659
  dmi.board.vendor: Hewlett-Packard
  dmi.board.version: 32.25
  dmi.chassis.type: 10
  dmi.chassis.vendor: Hewlett-Packard
  dmi.chassis.version: N/A
  dmi.modalias: 
dmi:bvnHewlett-Packard:bvrF.1C:bd05/17/2010:svnHewlett-Packard:pnHPPaviliondv6NotebookPC:pvr049D212412102:rvnHewlett-Packard:rn3659:rvr32.25:cvnHewlett-Packard:ct10:cvrN/A:
  dmi.product.name: HP Pavilion dv6 Notebook PC
  dmi.product.version: 049D212412102
  dmi.sys.vendor: Hewlett-Packard
  version.compiz: compiz 1:0.9.8.4+bzr3407-0ubuntu1
  version.ia32-libs: ia32-libs 20090808ubuntu36
  version.libdrm2: libdrm2 2.4.39-0ubuntu1
  version.libgl1-mesa-dri: libgl1-mesa-dri 9.0-0ubuntu1
  version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A
  version.libgl1-mesa-glx: libgl1-mesa-glx 9.0-0ubuntu1
  version.nvidia-graphics-drivers: nvidia-graphics-drivers N/A
  version.xserver-xorg-core: xserver-xorg-core 2:1.13.0-0ubuntu6
  version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.7.3-0ubuntu2
  version.xserver-xorg-video-ati: xserver-xorg-video-ati 
1:6.99.99~git20120913.8637f772-0ubuntu1
  version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.20.9-0ubuntu2
  version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 
1:1.0.2-0ubuntu3

To manage notifications about this bug go to:
https://bugs.launchpad.net/xorg-server/+bug/1075897/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1068773] Re: 3d games can't change resolution when on full screen , and nvidia proprietary driver can't be isntalled ... needs kernel sources ?

[Book 'em Dano]

Thank you for taking the time to report this bug and helping to make
Ubuntu better. Please run the command 'apport-collect 1068773' which
will attach necessary information for debugging this as an Xorg problem.
Thanks in advance.

** Package changed: ubuntu => xorg (Ubuntu)

** Changed in: xorg (Ubuntu)
   Status: New => Incomplete

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xorg in Ubuntu.
https://bugs.launchpad.net/bugs/1068773

Title:
  3d games can't change resolution when on full screen , and nvidia
  proprietary driver can't be isntalled ... needs kernel sources ?

Status in “xorg” package in Ubuntu:
  Incomplete

Bug description:
  I have problems with nvidia driver and repos on ubuntu 12.10 64bit.
  1)
  When i 'm in a 3d game and try to change resolution ingame the game exits.

  I tried to install the proprietary drivers (tested) but after reboot
  couldn't login to ubuntu , it lower the resolution and when i try to
  login i got nothing but the desktop screen no dash no menus no nothing
  

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1068773/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1077427] Re: System randomly hangs. Sometimes when unattended, sometimes using firefox

[Edward Donovan]

** Package changed: unity (Ubuntu) => xorg (Ubuntu)

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xorg in Ubuntu.
https://bugs.launchpad.net/bugs/1077427

Title:
  System randomly hangs.  Sometimes when unattended, sometimes using
  firefox

Status in “xorg” package in Ubuntu:
  New

Bug description:
  version 10.10 was quite stable.  no crashes/hangs.  upgraded to 12.04
  and stablilty suffered.  had about 1 hang/crash a day.  mouse/screen
  would freeze.  ssh from another host proved that the system was
  crashed.  Tried various nvidia drivers, switched to Noveau and host
  crashed more often and display would be slow/jerky.  Currently hangs
  1-2 times a day.  Considering to either load ubuntu 10.[04 10].  The
  system was both stable and awsome prior to upgrading to 12.X.  Use
  this system for work and it's becoming unusable.

  ProblemType: Bug
  DistroRelease: Ubuntu 12.10
  Package: unity 6.10.0-0ubuntu2
  ProcVersionSignature: Ubuntu 3.5.0-18.29-generic 3.5.7
  Uname: Linux 3.5.0-18-generic x86_64
  NonfreeKernelModules: nvidia
  .proc.driver.nvidia.gpus.0: Error: [Errno 21] Is a directory: 
'/proc/driver/nvidia/gpus/0'
  .proc.driver.nvidia.registry: Binary: ""
  .proc.driver.nvidia.version:
   NVRM version: NVIDIA UNIX x86_64 Kernel Module  304.48  Sun Sep  9 20:22:27 
PDT 2012
   GCC version:  gcc version 4.7.2 (Ubuntu/Linaro 4.7.2-2ubuntu1)
  .proc.driver.nvidia.warnings.fbdev:
   Your system is not currently configured to drive a VGA console
   on the primary VGA device. The NVIDIA Linux graphics driver
   requires the use of a text-mode VGA console. Use of other console
   drivers including, but not limited to, vesafb, may result in
   corruption and stability problems, and is not supported.
  .tmp.unity.support.test.0:
   
  ApportVersion: 2.6.1-0ubuntu6
  Architecture: amd64
  CompizPlugins: 
[core,composite,opengl,compiztoolbox,decor,vpswitch,snap,mousepoll,resize,place,move,wall,grid,regex,imgpng,session,gnomecompat,animation,fade,unitymtgrabhandles,workarounds,scale,expo,ezoom,unityshell]
  CompositorRunning: compiz
  Date: Sat Nov 10 12:34:29 2012
  DistUpgraded: 2012-11-01 10:33:51,505 DEBUG enabling apt cron job
  DistroCodename: quantal
  DistroVariant: ubuntu
  DkmsStatus: nvidia-experimental-304, 304.48, 3.5.0-18-generic, x86_64: 
installed
  GraphicsCard:
   NVIDIA Corporation G92 [GeForce 8800 GT] [10de:0611] (rev a2) (prog-if 00 
[VGA controller])
 Subsystem: XFX Pine Group Inc. Device [1682:2333]
  InstallationDate: Installed on 2012-10-06 (34 days ago)
  InstallationMedia: Ubuntu 12.04.1 LTS "Precise Pangolin" - Release amd64 
(20120823.1)
  JockeyStatus:
   kmod:nvidia_current - NVIDIA binary Xorg driver, kernel module and VDPAU 
library (Proprietary, Disabled, Not in use)
   kmod:nvidia_experimental_304 - nvidia_experimental_304 (Proprietary, 
Enabled, Not in use)
   kmod:nvidia_173 - NVIDIA binary Xorg driver, kernel module and VDPAU library 
(Proprietary, Disabled, Not in use)
   kmod:nvidia_173_updates - NVIDIA binary Xorg driver, kernel module and VDPAU 
library (Proprietary, Disabled, Not in use)
   kmod:nvidia_current_updates - NVIDIA binary Xorg driver, kernel module and 
VDPAU library (Proprietary, Disabled, Not in use)
  MachineType: System manufacturer System Product Name
  MarkForUpload: True
  ProcEnviron:
   TERM=xterm
   PATH=(custom, no user)
   XDG_RUNTIME_DIR=
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.5.0-18-generic 
root=UUID=2e4442ae-d71d-4cbb-b928-a089c0921d0e ro quiet splash vt.handoff=7
  SourcePackage: unity
  UpgradeStatus: Upgraded to quantal on 2012-11-01 (9 days ago)
  dmi.bios.date: 05/23/2012
  dmi.bios.vendor: American Megatrends Inc.
  dmi.bios.version: 0404
  dmi.board.asset.tag: To be filled by O.E.M.
  dmi.board.name: P8Z77-V LK
  dmi.board.vendor: ASUSTeK COMPUTER INC.
  dmi.board.version: Rev X.0x
  dmi.chassis.asset.tag: Asset-1234567890
  dmi.chassis.type: 3
  dmi.chassis.vendor: Chassis Manufacture
  dmi.chassis.version: Chassis Version
  dmi.modalias: 
dmi:bvnAmericanMegatrendsInc.:bvr0404:bd05/23/2012:svnSystemmanufacturer:pnSystemProductName:pvrSystemVersion:rvnASUSTeKCOMPUTERINC.:rnP8Z77-VLK:rvrRevX.0x:cvnChassisManufacture:ct3:cvrChassisVersion:
  dmi.product.name: System Product Name
  dmi.product.version: System Version
  dmi.sys.vendor: System manufacturer
  version.compiz: compiz 1:0.9.8.4+bzr3407-0ubuntu1
  version.ia32-libs: ia32-libs N/A
  version.libdrm2: libdrm2 2.4.39-0ubuntu1
  version.libgl1-mesa-dri: libgl1-mesa-dri 9.0-0ubuntu1
  version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A
  version.libgl1-mesa-glx: libgl1-mesa-glx 9.0-0ubuntu1
  version.nvidia-graphics-drivers: nvidia-graphics-drivers N/A
  version.xserver-xorg-core: xserver-xorg-core 2:1.13.0-0ubuntu6
  version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.7.3-0ubuntu2
  version.xserver-xorg-video-ati: xserver-xorg-vide

[Desktop-packages] [Bug 1068773] [NEW] 3d games can't change resolution when on full screen , and nvidia proprietary driver can't be isntalled ... needs kernel sources ?

[Launchpad Bug Tracker]

You have been subscribed to a public bug:

I have problems with nvidia driver and repos on ubuntu 12.10 64bit.
1)
When i 'm in a 3d game and try to change resolution ingame the game exits.

I tried to install the proprietary drivers (tested) but after reboot
couldn't login to ubuntu , it lower the resolution and when i try to
login i got nothing but the desktop screen no dash no menus no nothing


** Affects: xorg (Ubuntu)
 Importance: Undecided
 Status: Incomplete


** Tags: bot-comment
-- 
3d games can't change resolution when on full screen , and nvidia proprietary 
driver can't be isntalled ... needs kernel sources ?
https://bugs.launchpad.net/bugs/1068773
You received this bug notification because you are a member of Desktop 
Packages, which is subscribed to xorg in Ubuntu.

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1069107] [NEW] Unity can't switch to random windows

[Launchpad Bug Tracker]

You have been subscribed to a public bug:

Some windows seems to fall under the radar of Unity. They don't have
small indicator triangles in the Launcher, and you can't tab to them
using alt+tab. Which windows suffer from this seems very random. This
video describes the problem:

http://www.youtube.com/watch?v=lc4mw5l1b2E

my setup: ubuntu 12.04 desktop, 64 bit on a System76 laptop

** Affects: unity
 Importance: Undecided
 Status: New

** Affects: unity-2d (Ubuntu)
 Importance: Undecided
 Status: Incomplete


** Tags: bot-comment unity
-- 
Unity can't switch to random windows
https://bugs.launchpad.net/bugs/1069107
You received this bug notification because you are a member of Desktop 
Packages, which is subscribed to unity-2d in Ubuntu.

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1003080] Re: 10de:03d6 Unreadable screen occurs opening LibreOffice

[Launchpad Bug Tracker]

[Expired for nvidia-graphics-drivers (Ubuntu) because there has been no
activity for 60 days.]

** Changed in: nvidia-graphics-drivers (Ubuntu)
   Status: Incomplete => Expired

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to nvidia-graphics-drivers in Ubuntu.
https://bugs.launchpad.net/bugs/1003080

Title:
  10de:03d6 Unreadable screen occurs opening LibreOffice

Status in “nvidia-graphics-drivers” package in Ubuntu:
  Expired

Bug description:
  Launching LibreOffice in either Unity 3D or Gnome Shell causes the
  entire display to become unreadable. Using 12.04 64-bit with a GeForce
  7025. This behavior is not replicated by any other software. Within
  Libreoffice itself, I have turned off hardware acceleration and anti-
  aliasing; it made no difference.

  WORKAROUND: LibreOffice works normally in Unity 2D.

  ---
  .proc.driver.nvidia.gpus.0: Error: [Errno 21] Is a directory: 
'/proc/driver/nvidia/gpus/0'
  .proc.driver.nvidia.registry: Binary: ""
  .proc.driver.nvidia.version:
   NVRM version: NVIDIA UNIX x86_64 Kernel Module  295.49  Mon Apr 30 23:46:33 
PDT 2012
   GCC version:  gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5)
  .tmp.unity.support.test.0:

  ApportVersion: 2.0.1-0ubuntu7
  Architecture: amd64
  CompizPlugins: 
[core,composite,opengl,decor,grid,compiztoolbox,vpswitch,mousepoll,wall,move,place,gnomecompat,session,imgpng,snap,resize,regex,unitymtgrabhandles,animation,fade,workarounds,expo,scale,ezoom,unityshell]
  CompositorRunning: compiz
  DistUpgraded: Fresh install
  DistroCodename: precise
  DistroRelease: Ubuntu 12.04
  DistroVariant: ubuntu
  DkmsStatus:
   nvidia-current, 295.53, 3.2.0-24-generic, x86_64: installed
   nvidia-current-updates, 295.49, 3.2.0-24-generic, x86_64: installed
   vboxhost, 4.1.14, 3.2.0-24-generic, x86_64: installed
  ExtraDebuggingInterest: Yes, whatever it takes to get this fixed in Ubuntu
  GraphicsCard:
   NVIDIA Corporation C61 [GeForce 7025 / nForce 630a] [10de:03d6] (rev a2) 
(prog-if 00 [VGA controller])
     Subsystem: Biostar Microtech Int'l Corp Device [1565:1405]
  JockeyStatus:
   xorg:nvidia_current - NVIDIA accelerated graphics driver (Proprietary, 
Disabled, Not in use)
   xorg:nvidia_current_updates - NVIDIA accelerated graphics driver 
(post-release updates) (Proprietary, Enabled, In use)
  MachineType: BIOSTAR Group N68S3B
  NonfreeKernelModules: nvidia
  Package: xorg 1:7.6+12ubuntu1
  PackageArchitecture: amd64
  ProcEnviron:
   TERM=xterm
   PATH=(custom, no user)
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.2.0-24-generic 
root=UUID=cd649c8c-6002-444c-874f-5ae7ea6b0ab2 ro quiet splash vt.handoff=7
  ProcVersionSignature: Ubuntu 3.2.0-24.38-generic 3.2.16
  Tags: third-party-packages precise possible-manual-nvidia-install ubuntu 
compiz-0.9
  Uname: Linux 3.2.0-24-generic x86_64
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo
  dmi.bios.date: 11/12/2010
  dmi.bios.vendor: American Megatrends Inc.
  dmi.bios.version: 080015
  dmi.board.asset.tag: To Be Filled By O.E.M.
  dmi.board.name: N68S3B
  dmi.board.vendor: BIOSTAR Group
  dmi.chassis.asset.tag: None
  dmi.chassis.type: 3
  dmi.chassis.vendor: BIOSTAR Group
  dmi.modalias: 
dmi:bvnAmericanMegatrendsInc.:bvr080015:bd11/12/2010:svnBIOSTARGroup:pnN68S3B:pvr:rvnBIOSTARGroup:rnN68S3B:rvr:cvnBIOSTARGroup:ct3:cvr:
  dmi.product.name: N68S3B
  dmi.sys.vendor: BIOSTAR Group
  version.compiz: compiz 1:0.9.7.8-0ubuntu1
  version.ia32-libs: ia32-libs N/A
  version.libdrm2: libdrm2 2.4.32-1ubuntu1
  version.libgl1-mesa-dri: libgl1-mesa-dri 8.0.2-0ubuntu3.1
  version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A
  version.libgl1-mesa-glx: libgl1-mesa-glx 8.0.2-0ubuntu3.1
  version.nvidia-graphics-drivers: nvidia-graphics-drivers N/A
  version.xserver-xorg-core: xserver-xorg-core 2:1.11.4-0ubuntu10.2
  version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.7.0-0ubuntu1
  version.xserver-xorg-video-ati: xserver-xorg-video-ati 
1:6.14.99~git20111219.aacbd629-0ubuntu2
  version.xserver-xorg-video-intel: xserver-xorg-video-intel 
2:2.19.0-0ubuntu1~xup1
  version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 
1:0.0.16+git20111201+b5534a1-1build2

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/nvidia-graphics-drivers/+bug/1003080/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1044136] Re: NM fails to configure wired connection; ifconfig up works -- Atheros AR8152 atl1c

[Launchpad Bug Tracker]

[Expired for network-manager (Ubuntu) because there has been no activity
for 60 days.]

** Changed in: network-manager (Ubuntu)
   Status: Incomplete => Expired

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to network-manager in Ubuntu.
https://bugs.launchpad.net/bugs/1044136

Title:
  NM fails to configure wired connection; ifconfig up works -- Atheros
  AR8152 atl1c

Status in “network-manager” package in Ubuntu:
  Expired

Bug description:
  1) The release of Ubuntu you are using, via 'lsb_release -rd' or System -> 
About Ubuntu
  Description:  Ubuntu 12.04.1 LTS
  Release:  12.04

  2) The version of the package you are using, via 'apt-cache policy pkgname' 
or by checking in Software Center
  network-manager:
Installed: 0.9.4.0-0ubuntu4.1
Candidate: 0.9.4.0-0ubuntu4.1
Version table:
   *** 0.9.4.0-0ubuntu4.1 0
  500 http://us.archive.ubuntu.com/ubuntu/ precise-updates/main amd64 
Packages
  100 /var/lib/dpkg/status
   0.9.4.0-0ubuntu3 0
  500 http://us.archive.ubuntu.com/ubuntu/ precise/main amd64 Packages

  3) What you expected to happen
  plug ethernet in and have internet

  4) What happened instead
  No wired internet connection
  what happened: No wired internet connection

  
  After installing Ubuntu 12.04 using my wireless connection I was unable to 
just plug in my ethernet and have that work. Instead, after some research and 
guessing, I found that it had to be turned on using sudo ifconfig eth0 up. This 
is not user-friendly and must be fixed. Here is the relevant thread: 
http://ubuntuforums.org/showthread.php?t=2050194

  
  08:00.0 Ethernet controller: Atheros Communications Inc. AR8152 v1.1 Fast 
Ethernet (rev c1)
  Subsystem: Toshiba America Info Systems Device fd50
  Flags: bus master, fast devsel, latency 0, IRQ 44
  Memory at f300 (64-bit, non-prefetchable) [size=256K]
  I/O ports at 6000 [size=128]
  Capabilities: [40] Power Management version 3
  Capabilities: [48] MSI: Enable+ Count=1/1 Maskable- 64bit+
  Capabilities: [58] Express Endpoint, MSI 00
  Capabilities: [6c] Vital Product Data
  Capabilities: [100] Advanced Error Reporting
  Capabilities: [180] Device Serial Number ff-3f-b4-bc-60-eb-69-ff
  Kernel driver in use: atl1c
  Kernel modules: atl1c

  If you have any questions please ask.

  ProblemType: Bug
  DistroRelease: Ubuntu 12.04
  Package: network-manager 0.9.4.0-0ubuntu4.1
  ProcVersionSignature: Ubuntu 3.2.0-29.46-generic 3.2.24
  Uname: Linux 3.2.0-29-generic x86_64
  ApportVersion: 2.0.1-0ubuntu12
  Architecture: amd64
  Date: Thu Aug 30 20:17:30 2012
  IfupdownConfig:
   auto lo
   iface lo inet loopback
  InstallationMedia: Ubuntu 12.04 LTS "Precise Pangolin" - Release amd64 
(20120425)
  IpRoute:
   default via 192.168.254.254 dev wlan0  proto static 
   169.254.0.0/16 dev wlan0  scope link  metric 1000 
   192.168.254.0/24 dev wlan0  proto kernel  scope link  src 192.168.254.106  
metric 2
  NetworkManager.state:
   [main]
   NetworkingEnabled=true
   WirelessEnabled=true
   WWANEnabled=true
   WimaxEnabled=true
  ProcEnviron:
   PATH=(custom, user)
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  RfKill:
   0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
  SourcePackage: network-manager
  UpgradeStatus: No upgrade log present (probably fresh install)
  nmcli-dev:
   DEVICE TYPE  STATE DBUS-PATH 
 
   eth0   802-3-ethernetunavailable   
/org/freedesktop/NetworkManager/Devices/1  
   wlan0  802-11-wireless   connected 
/org/freedesktop/NetworkManager/Devices/0
  nmcli-nm:
   RUNNING VERSIONSTATE   NET-ENABLED   WIFI-HARDWARE   
WIFI   WWAN-HARDWARE   WWAN  
   running 0.9.4.0connected   enabled   enabled 
enabledenabled enabled

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1044136/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1049297] Re: Unable to open DBF file with Calc

[Launchpad Bug Tracker]

[Expired for libreoffice (Ubuntu) because there has been no activity for
60 days.]

** Changed in: libreoffice (Ubuntu)
   Status: Incomplete => Expired

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to libreoffice in Ubuntu.
https://bugs.launchpad.net/bugs/1049297

Title:
  Unable to open DBF file with Calc

Status in “libreoffice” package in Ubuntu:
  Expired

Bug description:
  Version: 3.5.4.2 on Ubuntu 12.04LTS

  When I try to open a DBF file a got this error:

  Erreur Générale.
  Erreur d'entrée / Sortie générale.

  This feature was working

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/libreoffice/+bug/1049297/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1077449] Re: Modem doesn't work in 12.04 3.2.0-32-generic (#51-Ubuntu SMP Wed Sep 26 21:33:09 UTC 2012)

[Chow Loong Jin]

I'm not sure where this goes, but nautilus-share definitely has nothing
to do with modems. I'm reassigning this to wvdial for the time being
since it appears to be mentioned.

** Package changed: nautilus-share (Ubuntu) => wvdial (Ubuntu)

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to wvdial in Ubuntu.
https://bugs.launchpad.net/bugs/1077449

Title:
  Modem doesn't work in 12.04 3.2.0-32-generic (#51-Ubuntu SMP Wed Sep
  26 21:33:09 UTC 2012)

Status in “wvdial” package in Ubuntu:
  New

Bug description:
  Minicom and Efax-gtk will not work.  Both appear to iniatialize, but
  no further function, no response to modem commands given, etc.  I'm
  NOT trying to connect to an ISP right now, I just want to use it with
  eFax-GTK.

  This exact same modem and computer worked together very well until
  recently.  There had been several updates, including Ubuntu before it
  just quit working.

  This modem works fine in Windoze, SAME machine, just switched to
  Ubuntu 12.04 drive by mechanical switch. I can go back and forth,
  always works in Windoze, never in Ubuntu.

  Modem will attempt to answer an incoming call, but can't be sure about
  function since I don't have another modem to call with.

  I have come to the conclusion that there is very likely a problem
  within the updated Ubuntu that prevents proper modem communication.

  IN MINICOM :
  Welcome to minicom 2.5
  OPTIONS: I18n
  Compiled on May 2 2011, 10:05:24.
  Port /dev/ttyS4
  Press CTRL-A Z for help on special keys
  Nothing further will be shown, no matter what keyboard input, etc. - except 
it will respond to CTL-A and Z, which are not modem responses

  IN EFAX-GTK :
  efax-0.9a: 21:27:23 opened /dev/ttyS4
  ( Then try to send and wait 5 minutes - no result, so press "Stop" )
  *** Stopping send/receive session ***
  efax-0.9a: 21:27:46 failed page /home/roger/Documents/Libre Office/Saddleback 
Labs Request.pdf.001

  I am a member of dialout and dip.

  Modem info:
  description: Serial controller product: 56K FaxModem Model 5610
  vendor: 3Com Corp, Modem Division
  physical id: 1 bus info: pci@:04:01.0
  version: 01 width: 32 bits clock: 33MHz
  capabilities: pm 16550 cap_list
  configuration: driver=serial latency=0
  resources: irq:17 ioport:d000(size=8 )

  roger@roger-desktop:~$ sudo wvdialconf
  [sudo] password for roger:
  Editing `/etc/wvdial.conf'.
  Scanning your serial ports for a modem.
  Modem Port Scan<*1>: S0 S1 S2 S3
  ttyS4<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
  ttyS4<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud
  ttyS4<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
  Modem Port Scan<*1>: S5 S6 S7 S8
  Modem Port Scan<*1>: S9 S10 S11 S12 S13 S14 S15 S16
  Modem Port Scan<*1>: S17 S18 S19 S20 S21 S22 S23 S24
  Modem Port Scan<*1>: S25 S26 S27 S28 S29 S30 S31
  Sorry, NO MODEM WAS DETECTED! Is it in use by another program? - ( my caps )
  Did you configure it properly with setserial?

  (  OK, so Ubuntu finds the modem, but doesn't find it !?!?!?  )

  Modem is at   ttyS4

  This is basically an internal US Robotics Sportster modem, NOT a
  Winmodem.

  roger@roger-desktop:~$ cat /var/log/syslog | grep modem
  Nov 9 13:26:47 roger-desktop modem-manager[919]:  ModemManager (version 
0.5.2.0) starting...
  Nov 9 13:26:47 roger-desktop modem-manager[919]:  Loaded plugin SimTech
  Nov 9 13:26:47 roger-desktop modem-manager[919]:  Loaded plugin MotoC
  Nov 9 13:26:47 roger-desktop modem-manager[919]:  Loaded plugin 
Ericsson MBM
  Nov 9 13:26:47 roger-desktop modem-manager[919]:  Loaded plugin ZTE
  Nov 9 13:26:47 roger-desktop modem-manager[919]:  Loaded plugin Linktop
  Nov 9 13:26:47 roger-desktop modem-manager[919]:  Loaded plugin AnyData
  Nov 9 13:26:47 roger-desktop modem-manager[919]:  Loaded plugin Option 
High-Speed
  Nov 9 13:26:47 roger-desktop modem-manager[919]:  Loaded plugin Wavecom
  Nov 9 13:26:47 roger-desktop modem-manager[919]:  Loaded plugin Sierra
  Nov 9 13:26:47 roger-desktop modem-manager[919]:  Loaded plugin Samsung
  Nov 9 13:26:47 roger-desktop modem-manager[919]:  Loaded plugin Novatel
  Nov 9 13:26:47 roger-desktop modem-manager[919]:  Loaded plugin Generic
  Nov 9 13:26:47 roger-desktop modem-manager[919]:  Loaded plugin Huawei
  Nov 9 13:26:47 roger-desktop modem-manager[919]:  Loaded plugin 
Longcheer
  Nov 9 13:26:47 roger-desktop modem-manager[919]:  Loaded plugin X22X
  Nov 9 13:26:47 roger-desktop modem-manager[919]:  Loaded plugin Nokia
  Nov 9 13:26:47 roger-desktop modem-manager[919]:  Loaded plugin Option
  Nov 9 13:26:47 roger-desktop modem-manager[919]:  Loaded plugin Gobi
  Nov 9 13:26:47 roger-desktop modem-manager[919]:  (ttyS4) opening 
serial port...
  Nov 9 13:26:47 roger-desktop NetworkManager[932]:  modem-manager is now 
available
  Nov 9 13:26:59 roger-desktop modem-manager[919]:  (ttyS4) closing 
serial port...
  Nov 9 13:26:59 roger-desktop modem-manager[919]

[Desktop-packages] [Bug 1077510] Re: [BlackOps, Realtek ALC889A, Green Line Out, Rear] Underruns, dropouts or crackling sound

[jamesjordin]

It does indeed seem to be a jack detection issue. I connected headphones
to the front panel headphones socket, and sound played through both!
Disconnecting resinstated the previous sound problems.

My quick and dirty hardware workaround has been to open the desktop case
and detach the front panel audio connectors from the soundcard. Not a
long term fix for anyone else using a Blackops X48 with SONAR/Realtek
ALC885, but it's got audio working on my Ubuntu Studio installation,
plus the Linux Mint and Mageia 2 installations as well.

Thanks for your help, Raymond - please feel free to mark as resolved
unless you want the bug report to remain active for dev reasons.

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to alsa-driver in Ubuntu.
https://bugs.launchpad.net/bugs/1077510

Title:
  [BlackOps, Realtek ALC889A, Green Line Out, Rear] Underruns, dropouts
  or crackling sound

Status in “alsa-driver” package in Ubuntu:
  Confirmed

Bug description:
  All audio sources tried produce the same result: stuttering/glitching
  sound when software mixer volume (NOT hardware/speaker volume) is
  turned up, no sound at all when mixer volume is low. Have tried online
  video (YouTube), and opening various audio file formats (wav, mp3,
  flac, ogg) using various applications (Audacious, VLC, Audacity, Movie
  Player) all with the same result.

  I have Ubuntu Studio installed on a multiboot system, alongside Linux
  Mint and Mageia (latest stable release of each as at 1 Nov 2012) - all
  of which are exhibiting the same problem.

  However, I still have my original installation of Windows 7, where the
  audio is working fine.

  I am following the instructions on this wiki page, hence why I'm reporting 
the bug:
  https://wiki.ubuntu.com/DebuggingSoundProblems

  Many thanks in advance! :)

  ProblemType: Bug
  DistroRelease: Ubuntu 12.10
  Package: alsa-base 1.0.25+dfsg-0ubuntu3
  ProcVersionSignature: Ubuntu 3.5.0-18.18-lowlatency 3.5.7
  Uname: Linux 3.5.0-18-lowlatency x86_64
  ApportVersion: 2.6.1-0ubuntu6
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC1:  james  1700 F xfce4-volumed
james  1753 F pulseaudio
   /dev/snd/controlC0:  james  1700 F xfce4-volumed
james  1753 F pulseaudio
  CurrentDmesg:
   [   16.898460] tg3 :04:00.0: eth0: Link is up at 100 Mbps, full duplex
   [   16.898463] tg3 :04:00.0: eth0: Flow control is off for TX and off 
for RX
   [   16.898804] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  Date: Sat Nov 10 22:27:50 2012
  InstallationDate: Installed on 2012-11-09 (1 days ago)
  InstallationMedia: Ubuntu-Studio 12.10 "Quantal Quetzal" - Release amd64 
(20121017.1)
  MarkForUpload: True
  PackageArchitecture: all
  SourcePackage: alsa-driver
  Symptom: audio
  Symptom_AlsaPlaybackTest: ALSA playback test through plughw:Intel failed
  Symptom_Card: Built-in Audio - HDA Intel
  Symptom_Jack: Green Line Out, Rear
  Symptom_Type: Underruns, dropouts, or "crackling" sound
  Title: [BlackOps, Realtek ALC889A, Green Line Out, Rear] Underruns, dropouts 
or crackling sound
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 05/08/2009
  dmi.bios.vendor: Phoenix Technologies, LTD
  dmi.bios.version: 6.00 PG
  dmi.board.name: BlackOps
  dmi.board.vendor: Foxconn
  dmi.board.version: FAB A
  dmi.chassis.type: 3
  dmi.chassis.vendor: OEM
  dmi.chassis.version: OEM
  dmi.modalias: 
dmi:bvnPhoenixTechnologies,LTD:bvr6.00PG:bd05/08/2009:svnFoxconn:pnBlackOps:pvrFABA:rvnFoxconn:rnBlackOps:rvrFABA:cvnOEM:ct3:cvrOEM:
  dmi.product.name: BlackOps
  dmi.product.version: FAB A
  dmi.sys.vendor: Foxconn

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1077510/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1033233] Re: [iMac9, 1, Realtek ALC889A, Speaker, Internal] No sound at all with kernel 3.5.0

[Raymond]

if you think it is a regression, you need to contact the author who
submit the patch

http://git.kernel.org/?p=linux/kernel/git/tiwai/sound.git;a=commitdiff;h=1a97b7f22774b454531f013638b181803fba470f;hp=9155f82a6a26da4a5b8d2d29f1d31836906b4712

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to alsa-driver in Ubuntu.
https://bugs.launchpad.net/bugs/1033233

Title:
  [iMac9,1, Realtek ALC889A, Speaker, Internal] No sound at all with
  kernel 3.5.0

Status in “alsa-driver” package in Ubuntu:
  Confirmed

Bug description:
  This bug is a regression when upgrading from precise to quantal.

  The sound sounds works okay on my Mac with kernel 3.2.0-27, but there
  is no sound at all if I choose a  3.5.0-7 kernel, all other packages
  and all settings being exactly the same. This seems to prove that the
  problem lies within the kernel.

  In case it helps, in /etc/modprobe.d/alsa-base.conf, I have "options
  snd-hda-intel model=imac91".

  $ lsb_release -rd
  Description:Ubuntu quantal (development branch)
  Release:12.10

  $ apt-cache policy linux-image-3.5.0-7-generic
  linux-image-3.5.0-7-generic:
Installé : 3.5.0-7.7
Candidat : 3.5.0-7.7
   Table de version :
   *** 3.5.0-7.7 0
  500 http://us.archive.ubuntu.com/ubuntu/ quantal/main amd64 Packages
  100 /var/lib/dpkg/status

  expected : the sound works
  happened : no sound at all

  ProblemType: Bug
  DistroRelease: Ubuntu 12.10
  Package: alsa-base 1.0.25+dfsg-0ubuntu2
  ProcVersionSignature: Ubuntu 3.5.0-7.7-generic 3.5.0
  Uname: Linux 3.5.0-7-generic x86_64
  NonfreeKernelModules: nvidia wl
  ApportVersion: 2.4-0ubuntu6
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  eric   2011 F pulseaudio
  Date: Sun Aug  5 17:53:32 2012
  InstallationMedia: Kubuntu 10.04 LTS "Lucid Lynx" - Release amd64 (20100427)
  PackageArchitecture: all
  ProcEnviron:
   LANGUAGE=
   TERM=xterm
   PATH=(custom, no user)
   LANG=fr_FR.UTF-8
   SHELL=/bin/bash
  SourcePackage: alsa-driver
  Symptom: audio
  Symptom_AlsaPlaybackTest: ALSA playback test through plughw:NVidia failed
  Symptom_Card: Audio intégré - HDA NVidia
  Symptom_DevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  eric   2011 F pulseaudio
  Symptom_Jack: Speaker, Internal
  Symptom_Type: No sound at all
  Title: [iMac9,1, Realtek ALC889A, Speaker, Internal] No sound at all
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 04/27/09
  dmi.bios.vendor: Apple Inc.
  dmi.bios.version: IM91.88Z.008D.B08.0904271717
  dmi.board.asset.tag: Base Board Asset Tag
  dmi.board.name: Mac-F2218EA9
  dmi.board.vendor: Apple Inc.
  dmi.chassis.asset.tag: Asset Tag#
  dmi.chassis.type: 13
  dmi.chassis.vendor: Apple Inc.
  dmi.chassis.version: Mac-F2218EA9
  dmi.modalias: 
dmi:bvnAppleInc.:bvrIM91.88Z.008D.B08.0904271717:bd04/27/09:svnAppleInc.:pniMac9,1:pvr1.0:rvnAppleInc.:rnMac-F2218EA9:rvr:cvnAppleInc.:ct13:cvrMac-F2218EA9:
  dmi.product.name: iMac9,1
  dmi.product.version: 1.0
  dmi.sys.vendor: Apple Inc.
  mtime.conffile..etc.modprobe.d.alsa.base.conf: 2012-08-05T16:25:01.731390

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1033233/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1077542] [NEW] It is difficult even after installation to set grammar checker.

[ramashish sharma]

Public bug reported:

LibreOffice cannot correct grammatical errors. I wanted to add a
language tool with the help of extension manager. It gives a message
related to java issue.

** Affects: libreoffice (Ubuntu)
 Importance: Undecided
 Status: New

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to libreoffice in Ubuntu.
https://bugs.launchpad.net/bugs/1077542

Title:
  It is difficult even after installation to set grammar checker.

Status in “libreoffice” package in Ubuntu:
  New

Bug description:
  LibreOffice cannot correct grammatical errors. I wanted to add a
  language tool with the help of extension manager. It gives a message
  related to java issue.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/libreoffice/+bug/1077542/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 998198] Re: New window option in Gedit quick list opens a window with two tabs if a Gedit window is already open

[Timothy Arceri]

*** This bug is a duplicate of bug 965510 ***
https://bugs.launchpad.net/bugs/965510

** This bug has been marked a duplicate of bug 965510
   option --new-window not working correctly

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to gedit in Ubuntu.
https://bugs.launchpad.net/bugs/998198

Title:
  New window option in Gedit quick list opens a window with two tabs if
  a Gedit window is already open

Status in “gedit” package in Ubuntu:
  Confirmed

Bug description:
  1) The release of Ubuntu you are using, via 'lsb_release -rd' or
  System -> About Ubuntu

  Ubuntu 12.04 LTS

  2) The version of the package you are using, via 'apt-cache policy
  pkgname' or by checking in Software Center

  3.4.1-0ubuntu1

  3) What you expected to happen

  When selecting the new window option from Gedit quick list a window
  with ONE tab should be opened.

  4) What happened instead

  When selecting the new window option from the Gedit quick list a new
  window with TWO tabs is opened. This happens only when one or more
  Gedit windows is already open. If the option is used when no Gedit
  windows are open the new window has only one tab.

  ProblemType: Bug
  DistroRelease: Ubuntu 12.04
  Package: gedit 3.4.1-0ubuntu1
  ProcVersionSignature: Ubuntu 3.2.0-24.37-generic-pae 3.2.14
  Uname: Linux 3.2.0-24-generic-pae i686
  ApportVersion: 2.0.1-0ubuntu7
  Architecture: i386
  Date: Fri May 11 21:59:42 2012
  InstallationMedia: Ubuntu 12.04 LTS "Precise Pangolin" - Release i386 
(20120423)
  ProcEnviron:
   PATH=(custom, no user)
   LANG=fi_FI.UTF-8
   SHELL=/bin/bash
  SourcePackage: gedit
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/gedit/+bug/998198/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1077541] Re: Simple scan should not just crash when it comes across problems

[Tim Abell]

See these bugs for a flavour of why this is not just me falling over this in 
some obscure situation and why this is a broader issue for the users of ubuntu:
* https://bugs.launchpad.net/simple-scan/+bug/897469
* https://bugs.launchpad.net/ubuntu/+source/simple-scan/+bug/843361
* https://bugs.launchpad.net/ubuntu/+source/simple-scan/+bug/899746
* https://bugs.launchpad.net/ubuntu/+source/simple-scan/+bug/955848

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to simple-scan in Ubuntu.
https://bugs.launchpad.net/bugs/1077541

Title:
  Simple scan should not just crash when it comes across problems

Status in “simple-scan” package in Ubuntu:
  New

Bug description:
  Much as I appreciate the wall of text in
  https://help.ubuntu.com/community/SimpleScanHardwareIssues it still
  sucks from a user perspective that the program just bombs if there is
  a problem.

  Please catch errors and provide useful diagnostics instead.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/simple-scan/+bug/1077541/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1077541] [NEW] Simple scan should not just crash when it comes across problems

[Tim Abell]

Public bug reported:

Much as I appreciate the wall of text in
https://help.ubuntu.com/community/SimpleScanHardwareIssues it still
sucks from a user perspective that the program just bombs if there is a
problem.

Please catch errors and provide useful diagnostics instead.

** Affects: simple-scan (Ubuntu)
 Importance: Undecided
 Status: New

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to simple-scan in Ubuntu.
https://bugs.launchpad.net/bugs/1077541

Title:
  Simple scan should not just crash when it comes across problems

Status in “simple-scan” package in Ubuntu:
  New

Bug description:
  Much as I appreciate the wall of text in
  https://help.ubuntu.com/community/SimpleScanHardwareIssues it still
  sucks from a user perspective that the program just bombs if there is
  a problem.

  Please catch errors and provide useful diagnostics instead.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/simple-scan/+bug/1077541/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1077510] Re: [BlackOps, Realtek ALC889A, Green Line Out, Rear] Underruns, dropouts or crackling sound

[jamesjordin]

Thanks Raymond,

I believe the front audio panel does support jack detection, as I seem
to remember that the Realtek software in Windows 7 did seem to detect
when headphones were connected to the front panel before I disabled that
feature (months/years? ago).

Apologies, I'm quite new to Ubuntu (and Linux) - I tried inputting "hda-
jack-sense" in Terminal, and after inputting "alsamixer", but neither
seemed to do anything. Very sorry, I may need a bit of hand-holding with
this...


When watching alsamixer while an audio file is playing, I see channels 
"Surround", "Center", "LFE" and "Side" rapidly muting and unmuting in time with 
the 'glitches', so it looks to my newbie eyes like your suggestion could be on 
the money!


Incidentally, following these instructions:
https://wiki.ubuntu.com/Audio/UpgradingAlsa
https://wiki.ubuntu.com/Audio/UpgradingAlsa/DKMS
Downloaded "alsa-hda-dkms_0.201211100953~quantal1_all.deb" and installed via 
'right-click > Ubuntu Software Center', rebooted - no effect, so uninstalled 
using "sudo apt-get remove alsa-hda-dkms" and rebooted again.

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to alsa-driver in Ubuntu.
https://bugs.launchpad.net/bugs/1077510

Title:
  [BlackOps, Realtek ALC889A, Green Line Out, Rear] Underruns, dropouts
  or crackling sound

Status in “alsa-driver” package in Ubuntu:
  Confirmed

Bug description:
  All audio sources tried produce the same result: stuttering/glitching
  sound when software mixer volume (NOT hardware/speaker volume) is
  turned up, no sound at all when mixer volume is low. Have tried online
  video (YouTube), and opening various audio file formats (wav, mp3,
  flac, ogg) using various applications (Audacious, VLC, Audacity, Movie
  Player) all with the same result.

  I have Ubuntu Studio installed on a multiboot system, alongside Linux
  Mint and Mageia (latest stable release of each as at 1 Nov 2012) - all
  of which are exhibiting the same problem.

  However, I still have my original installation of Windows 7, where the
  audio is working fine.

  I am following the instructions on this wiki page, hence why I'm reporting 
the bug:
  https://wiki.ubuntu.com/DebuggingSoundProblems

  Many thanks in advance! :)

  ProblemType: Bug
  DistroRelease: Ubuntu 12.10
  Package: alsa-base 1.0.25+dfsg-0ubuntu3
  ProcVersionSignature: Ubuntu 3.5.0-18.18-lowlatency 3.5.7
  Uname: Linux 3.5.0-18-lowlatency x86_64
  ApportVersion: 2.6.1-0ubuntu6
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC1:  james  1700 F xfce4-volumed
james  1753 F pulseaudio
   /dev/snd/controlC0:  james  1700 F xfce4-volumed
james  1753 F pulseaudio
  CurrentDmesg:
   [   16.898460] tg3 :04:00.0: eth0: Link is up at 100 Mbps, full duplex
   [   16.898463] tg3 :04:00.0: eth0: Flow control is off for TX and off 
for RX
   [   16.898804] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  Date: Sat Nov 10 22:27:50 2012
  InstallationDate: Installed on 2012-11-09 (1 days ago)
  InstallationMedia: Ubuntu-Studio 12.10 "Quantal Quetzal" - Release amd64 
(20121017.1)
  MarkForUpload: True
  PackageArchitecture: all
  SourcePackage: alsa-driver
  Symptom: audio
  Symptom_AlsaPlaybackTest: ALSA playback test through plughw:Intel failed
  Symptom_Card: Built-in Audio - HDA Intel
  Symptom_Jack: Green Line Out, Rear
  Symptom_Type: Underruns, dropouts, or "crackling" sound
  Title: [BlackOps, Realtek ALC889A, Green Line Out, Rear] Underruns, dropouts 
or crackling sound
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 05/08/2009
  dmi.bios.vendor: Phoenix Technologies, LTD
  dmi.bios.version: 6.00 PG
  dmi.board.name: BlackOps
  dmi.board.vendor: Foxconn
  dmi.board.version: FAB A
  dmi.chassis.type: 3
  dmi.chassis.vendor: OEM
  dmi.chassis.version: OEM
  dmi.modalias: 
dmi:bvnPhoenixTechnologies,LTD:bvr6.00PG:bd05/08/2009:svnFoxconn:pnBlackOps:pvrFABA:rvnFoxconn:rnBlackOps:rvrFABA:cvnOEM:ct3:cvrOEM:
  dmi.product.name: BlackOps
  dmi.product.version: FAB A
  dmi.sys.vendor: Foxconn

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1077510/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 965510] Re: option --new-window not working correctly

[Timothy Arceri]

Patch submitted upstream

** Changed in: hundredpapercuts
   Status: Triaged => In Progress

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to gedit in Ubuntu.
https://bugs.launchpad.net/bugs/965510

Title:
  option --new-window not working correctly

Status in Light-Weight Text Editor for Gnome:
  New
Status in One Hundred Paper Cuts:
  In Progress
Status in “gedit” package in Ubuntu:
  Triaged

Bug description:
  First, to reproduce, open Gedit (Text Editor). Right click on its icon
  in the Unity Taskbar. Oddly, clicking either of the two new options
  (create a new document or open a new window) opens a new window with
  two tabs, labelled Untitled Document 2 and the other one Untitled
  Document 3. What should happen is one new tab is opened when creating
  a new document, and one new window with one tab is opened for opening
  a new window. However, the aforementioned happens. I will upload a
  screenshot ASAP. I am running Precise Beta with the latest updates,
  and the latest version of Gedit.

  ProblemType: Bug
  DistroRelease: Ubuntu 12.04
  Package: gedit 3.3.8-0ubuntu1
  ProcVersionSignature: Ubuntu 3.2.0-20.32-generic 3.2.12
  Uname: Linux 3.2.0-20-generic x86_64
  ApportVersion: 1.95-0ubuntu1
  Architecture: amd64
  Date: Mon Mar 26 13:02:15 2012
  EcryptfsInUse: Yes
  InstallationMedia: Ubuntu 12.04 LTS "Precise Pangolin" - Alpha amd64 
(20120321)
  ProcEnviron:
   TERM=xterm
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  SourcePackage: gedit
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/gedit/+bug/965510/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1043063] Re: Folder icons do not appear in the bookmarks in nautilus until the user opens them

[Dominic]

My nautilus version is 3.4.2 and the icons i use are located in
/usr/share/icons.

Please tell me if this works for you:
1. Create a link to a mounted hard drive (/mnt/Windows for me)
2. Place the link in a subfolder in your home directory (~/Devices for me)
3. Set an icon on the link using right-click/properties
4. Open the link then add it to places (using the places menu)
5. The device should appear in your places with the right icon
6. Open the terminal then type "killall nautilus" while nautilus is still open
7. Launch nautilus again
The icon in the places should be the default folder icon, it will reappear if 
you click on it or if look in the folder containing the link.

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to nautilus in Ubuntu.
https://bugs.launchpad.net/bugs/1043063

Title:
  Folder icons do not appear in the bookmarks in nautilus until the user
  opens them

Status in One Hundred Paper Cuts:
  Incomplete
Status in Nautilus:
  New
Status in “nautilus” package in Ubuntu:
  Incomplete

Bug description:
  When for example we set a custom icon for a folder and then add this
  folder to the bookmarks, the folder in the left panel will have the
  default "folder" icon, if we click on it the icon is updated but if we
  kill nautilus and reopen it, the icon will be gone again.

To manage notifications about this bug go to:
https://bugs.launchpad.net/hundredpapercuts/+bug/1043063/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1077366] Re: [G31M-ES2L, Realtek ALC883, Green Line Out, Rear] No sound at all

[Raymond]

post the output of alsa-info.sh

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to alsa-driver in Ubuntu.
https://bugs.launchpad.net/bugs/1077366

Title:
  [G31M-ES2L, Realtek ALC883, Green Line Out, Rear] No sound at all

Status in “alsa-driver” package in Ubuntu:
  New

Bug description:
  PLease fix the bug please

  ProblemType: Bug
  DistroRelease: Ubuntu 12.04
  Package: alsa-base 1.0.25+dfsg-0ubuntu1
  ProcVersionSignature: Ubuntu 3.2.0-32.51-generic 3.2.30
  Uname: Linux 3.2.0-32-generic i686
  AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24.
  ApportVersion: 2.0.1-0ubuntu14
  Architecture: i386
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  webwerks   1683 F pulseaudio
  Card0.Amixer.info:
   Card hw:0 'Intel'/'HDA Intel at 0xfdff8000 irq 44'
 Mixer name : 'Realtek ALC883'
 Components : 'HDA:10ec0883,1458c603,0012'
 Controls  : 42
 Simple ctrls  : 22
  CurrentDmesg: [   16.922246] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  Date: Sat Nov 10 20:12:36 2012
  InstallationMedia: Ubuntu 11.04 "Natty Narwhal" - Release i386 (20110427)
  PackageArchitecture: all
  ProcEnviron:
   LANGUAGE=en_IN:en
   TERM=xterm
   PATH=(custom, no user)
   LANG=en_IN
   SHELL=/bin/bash
  SourcePackage: alsa-driver
  Symptom: audio
  Symptom_AlsaPlaybackTest: ALSA playback test through plughw:Intel failed
  Symptom_Card: Built-in Audio - HDA Intel
  Symptom_DevicesInUse:
   1683  webwerks  F pulseaudio
   PID ACCESS COMMAND
  Symptom_Jack: Green Line Out, Rear
  Symptom_Type: No sound at all
  Title: [G31M-ES2L, Realtek ALC883, Green Line Out, Rear] No sound at all
  UpgradeStatus: Upgraded to precise on 2012-10-23 (18 days ago)
  dmi.bios.date: 09/29/2009
  dmi.bios.vendor: Award Software International, Inc.
  dmi.bios.version: F10
  dmi.board.name: G31M-ES2L
  dmi.board.vendor: Gigabyte Technology Co., Ltd.
  dmi.chassis.type: 3
  dmi.chassis.vendor: Gigabyte Technology Co., Ltd.
  dmi.modalias: 
dmi:bvnAwardSoftwareInternational,Inc.:bvrF10:bd09/29/2009:svnGigabyteTechnologyCo.,Ltd.:pnG31M-ES2L:pvr:rvnGigabyteTechnologyCo.,Ltd.:rnG31M-ES2L:rvr:cvnGigabyteTechnologyCo.,Ltd.:ct3:cvr:
  dmi.product.name: G31M-ES2L
  dmi.sys.vendor: Gigabyte Technology Co., Ltd.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1077366/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1074615] Re: Internal microphone don't work on Acer AO722

[Raymond]

try hda-jack-sense and post the result before and after you plug mic
into mic jack

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to alsa-driver in Ubuntu.
https://bugs.launchpad.net/bugs/1074615

Title:
  Internal microphone don't work on Acer AO722

Status in “alsa-driver” package in Ubuntu:
  Confirmed

Bug description:
  Internal microphone of netbook Acer AO722 seems don't work in 12.10.
  In previous releases I mute left channel of microphone in alsamixer and it 
began to work. But in new release this trick don't work anymore.

  ProblemType: Bug
  DistroRelease: Ubuntu 12.10
  Package: alsa-base 1.0.25+dfsg-0ubuntu3
  ProcVersionSignature: Ubuntu 3.5.0-18.29-generic 3.5.7
  Uname: Linux 3.5.0-18-generic i686
  NonfreeKernelModules: fglrx wl
  ApportVersion: 2.6.1-0ubuntu6
  Architecture: i386
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC1:  zws3055 F pulseaudio
   /dev/snd/pcmC1D0p:   zws3055 F...m pulseaudio
   /dev/snd/controlC0:  zws3055 F pulseaudio
  Date: Sat Nov  3 13:09:01 2012
  InstallationDate: Installed on 2012-08-26 (68 days ago)
  InstallationMedia: Ubuntu 12.10 "Quantal Quetzal" - Alpha i386 (20120826)
  MarkForUpload: True
  PackageArchitecture: all
  SourcePackage: alsa-driver
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 09/19/2011
  dmi.bios.vendor: Acer
  dmi.bios.version: V1.07
  dmi.board.asset.tag: Base Board Asset Tag
  dmi.board.name: JE10-BZ
  dmi.board.vendor: Acer
  dmi.board.version: Base Board Version
  dmi.chassis.type: 10
  dmi.chassis.vendor: Acer
  dmi.chassis.version: V1.07
  dmi.modalias: 
dmi:bvnAcer:bvrV1.07:bd09/19/2011:svnAcer:pnAO722:pvrV1.07:rvnAcer:rnJE10-BZ:rvrBaseBoardVersion:cvnAcer:ct10:cvrV1.07:
  dmi.product.name: AO722
  dmi.product.version: V1.07
  dmi.sys.vendor: Acer

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1074615/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1077510] Re: [BlackOps, Realtek ALC889A, Green Line Out, Rear] Underruns, dropouts or crackling sound

[Raymond]

your pulseaudio log show that the jack state of headphone changes from
on to off and off to on

does your on board sound card and front audio panel support jack
detecton ?

try hda-jack-sense

does those play switches in alsamixer changes rapidly ?

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to alsa-driver in Ubuntu.
https://bugs.launchpad.net/bugs/1077510

Title:
  [BlackOps, Realtek ALC889A, Green Line Out, Rear] Underruns, dropouts
  or crackling sound

Status in “alsa-driver” package in Ubuntu:
  Confirmed

Bug description:
  All audio sources tried produce the same result: stuttering/glitching
  sound when software mixer volume (NOT hardware/speaker volume) is
  turned up, no sound at all when mixer volume is low. Have tried online
  video (YouTube), and opening various audio file formats (wav, mp3,
  flac, ogg) using various applications (Audacious, VLC, Audacity, Movie
  Player) all with the same result.

  I have Ubuntu Studio installed on a multiboot system, alongside Linux
  Mint and Mageia (latest stable release of each as at 1 Nov 2012) - all
  of which are exhibiting the same problem.

  However, I still have my original installation of Windows 7, where the
  audio is working fine.

  I am following the instructions on this wiki page, hence why I'm reporting 
the bug:
  https://wiki.ubuntu.com/DebuggingSoundProblems

  Many thanks in advance! :)

  ProblemType: Bug
  DistroRelease: Ubuntu 12.10
  Package: alsa-base 1.0.25+dfsg-0ubuntu3
  ProcVersionSignature: Ubuntu 3.5.0-18.18-lowlatency 3.5.7
  Uname: Linux 3.5.0-18-lowlatency x86_64
  ApportVersion: 2.6.1-0ubuntu6
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC1:  james  1700 F xfce4-volumed
james  1753 F pulseaudio
   /dev/snd/controlC0:  james  1700 F xfce4-volumed
james  1753 F pulseaudio
  CurrentDmesg:
   [   16.898460] tg3 :04:00.0: eth0: Link is up at 100 Mbps, full duplex
   [   16.898463] tg3 :04:00.0: eth0: Flow control is off for TX and off 
for RX
   [   16.898804] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  Date: Sat Nov 10 22:27:50 2012
  InstallationDate: Installed on 2012-11-09 (1 days ago)
  InstallationMedia: Ubuntu-Studio 12.10 "Quantal Quetzal" - Release amd64 
(20121017.1)
  MarkForUpload: True
  PackageArchitecture: all
  SourcePackage: alsa-driver
  Symptom: audio
  Symptom_AlsaPlaybackTest: ALSA playback test through plughw:Intel failed
  Symptom_Card: Built-in Audio - HDA Intel
  Symptom_Jack: Green Line Out, Rear
  Symptom_Type: Underruns, dropouts, or "crackling" sound
  Title: [BlackOps, Realtek ALC889A, Green Line Out, Rear] Underruns, dropouts 
or crackling sound
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 05/08/2009
  dmi.bios.vendor: Phoenix Technologies, LTD
  dmi.bios.version: 6.00 PG
  dmi.board.name: BlackOps
  dmi.board.vendor: Foxconn
  dmi.board.version: FAB A
  dmi.chassis.type: 3
  dmi.chassis.vendor: OEM
  dmi.chassis.version: OEM
  dmi.modalias: 
dmi:bvnPhoenixTechnologies,LTD:bvr6.00PG:bd05/08/2009:svnFoxconn:pnBlackOps:pvrFABA:rvnFoxconn:rnBlackOps:rvrFABA:cvnOEM:ct3:cvrOEM:
  dmi.product.name: BlackOps
  dmi.product.version: FAB A
  dmi.sys.vendor: Foxconn

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1077510/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1077510] Re: [BlackOps, Realtek ALC889A, Green Line Out, Rear] Underruns, dropouts or crackling sound

[jamesjordin]

Just checked alsamixer via terminal, chip is listed as "Realtek ALC889A" - 
Foxconn website lists my audio chip as "SONAR audio card, Realtek® ALC885, 7.1 
channel Audio"
http://www.foxconnchannel.com/ProductDetail.aspx?T=motherboard&U=en-us385

Could this be having an impact?

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to alsa-driver in Ubuntu.
https://bugs.launchpad.net/bugs/1077510

Title:
  [BlackOps, Realtek ALC889A, Green Line Out, Rear] Underruns, dropouts
  or crackling sound

Status in “alsa-driver” package in Ubuntu:
  Confirmed

Bug description:
  All audio sources tried produce the same result: stuttering/glitching
  sound when software mixer volume (NOT hardware/speaker volume) is
  turned up, no sound at all when mixer volume is low. Have tried online
  video (YouTube), and opening various audio file formats (wav, mp3,
  flac, ogg) using various applications (Audacious, VLC, Audacity, Movie
  Player) all with the same result.

  I have Ubuntu Studio installed on a multiboot system, alongside Linux
  Mint and Mageia (latest stable release of each as at 1 Nov 2012) - all
  of which are exhibiting the same problem.

  However, I still have my original installation of Windows 7, where the
  audio is working fine.

  I am following the instructions on this wiki page, hence why I'm reporting 
the bug:
  https://wiki.ubuntu.com/DebuggingSoundProblems

  Many thanks in advance! :)

  ProblemType: Bug
  DistroRelease: Ubuntu 12.10
  Package: alsa-base 1.0.25+dfsg-0ubuntu3
  ProcVersionSignature: Ubuntu 3.5.0-18.18-lowlatency 3.5.7
  Uname: Linux 3.5.0-18-lowlatency x86_64
  ApportVersion: 2.6.1-0ubuntu6
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC1:  james  1700 F xfce4-volumed
james  1753 F pulseaudio
   /dev/snd/controlC0:  james  1700 F xfce4-volumed
james  1753 F pulseaudio
  CurrentDmesg:
   [   16.898460] tg3 :04:00.0: eth0: Link is up at 100 Mbps, full duplex
   [   16.898463] tg3 :04:00.0: eth0: Flow control is off for TX and off 
for RX
   [   16.898804] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  Date: Sat Nov 10 22:27:50 2012
  InstallationDate: Installed on 2012-11-09 (1 days ago)
  InstallationMedia: Ubuntu-Studio 12.10 "Quantal Quetzal" - Release amd64 
(20121017.1)
  MarkForUpload: True
  PackageArchitecture: all
  SourcePackage: alsa-driver
  Symptom: audio
  Symptom_AlsaPlaybackTest: ALSA playback test through plughw:Intel failed
  Symptom_Card: Built-in Audio - HDA Intel
  Symptom_Jack: Green Line Out, Rear
  Symptom_Type: Underruns, dropouts, or "crackling" sound
  Title: [BlackOps, Realtek ALC889A, Green Line Out, Rear] Underruns, dropouts 
or crackling sound
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 05/08/2009
  dmi.bios.vendor: Phoenix Technologies, LTD
  dmi.bios.version: 6.00 PG
  dmi.board.name: BlackOps
  dmi.board.vendor: Foxconn
  dmi.board.version: FAB A
  dmi.chassis.type: 3
  dmi.chassis.vendor: OEM
  dmi.chassis.version: OEM
  dmi.modalias: 
dmi:bvnPhoenixTechnologies,LTD:bvr6.00PG:bd05/08/2009:svnFoxconn:pnBlackOps:pvrFABA:rvnFoxconn:rnBlackOps:rvrFABA:cvnOEM:ct3:cvrOEM:
  dmi.product.name: BlackOps
  dmi.product.version: FAB A
  dmi.sys.vendor: Foxconn

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1077510/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1070207] Re: Trackpoint doesn't work on Thinkpad L530

[Lars Tandle Kyllingstad]

A workaround for the bug is to load the psmouse kernel module with
option proto=bare, but unfortunately, this causes the touchpad to lose
multi-touch functionality.

Check out the "tp-trackpoint-elantech" package at the "thinkpad-extras"
PPA, which implements this workaround, along with a bit of X
configuration that enables scrolling with the middle button.

https://launchpad.net/~linrunner/+archive/thinkpad-extras

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xserver-xorg-input-synaptics in Ubuntu.
https://bugs.launchpad.net/bugs/1070207

Title:
  Trackpoint doesn't work on Thinkpad L530

Status in “xserver-xorg-input-synaptics” package in Ubuntu:
  Confirmed
Status in “xserver-xorg-input-synaptics” package in Debian:
  New

Bug description:
  The trackpoint on my Thinkpad doesn't work. This is rather annoying,
  since I specifically bought it because it had Ubuntu hardware
  certification:

  http://www.ubuntu.com/certification/hardware/201202-10579/

  ProblemType: Bug
  DistroRelease: Ubuntu 12.10
  Package: xserver-xorg-input-synaptics 1.6.2-1ubuntu5
  ProcVersionSignature: Ubuntu 3.5.0-17.28-generic 3.5.5
  Uname: Linux 3.5.0-17-generic x86_64
  ApportVersion: 2.6.1-0ubuntu3
  Architecture: amd64
  Date: Tue Oct 23 07:55:58 2012
  DistUpgraded: 2012-10-19 12:30:38,295 DEBUG enabling apt cron job
  DistroCodename: quantal
  DistroVariant: ubuntu
  EcryptfsInUse: Yes
  InstallationMedia: Ubuntu 12.04 LTS "Precise Pangolin" - Release amd64 
(20120425)
  MachineType: LENOVO 24812TG
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.5.0-17-generic 
root=UUID=a6e4e235-d477-4e04-8f43-0b8a7ca5ed03 ro quiet splash vt.handoff=7
  SourcePackage: xserver-xorg-input-synaptics
  UpgradeStatus: Upgraded to quantal on 2012-10-19 (3 days ago)
  dmi.bios.date: 05/28/2012
  dmi.bios.vendor: LENOVO
  dmi.bios.version: G3ET34WW(1.08)
  dmi.board.asset.tag: Not Available
  dmi.board.name: 24812TG
  dmi.board.vendor: LENOVO
  dmi.board.version: Not Available
  dmi.chassis.asset.tag: No Asset Information
  dmi.chassis.type: 10
  dmi.chassis.vendor: LENOVO
  dmi.chassis.version: Not Available
  dmi.modalias: 
dmi:bvnLENOVO:bvrG3ET34WW(1.08):bd05/28/2012:svnLENOVO:pn24812TG:pvrThinkPadL530:rvnLENOVO:rn24812TG:rvrNotAvailable:cvnLENOVO:ct10:cvrNotAvailable:
  dmi.product.name: 24812TG
  dmi.product.version: ThinkPad L530
  dmi.sys.vendor: LENOVO
  version.compiz: compiz 1:0.9.8.4-0ubuntu3
  version.ia32-libs: ia32-libs 20090808ubuntu36
  version.libdrm2: libdrm2 2.4.39-0ubuntu1
  version.libgl1-mesa-dri: libgl1-mesa-dri 9.0-0ubuntu1
  version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A
  version.libgl1-mesa-glx: libgl1-mesa-glx 9.0-0ubuntu1
  version.xserver-xorg-core: xserver-xorg-core 2:1.13.0-0ubuntu6
  version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.7.3-0ubuntu2
  version.xserver-xorg-video-ati: xserver-xorg-video-ati 
1:6.99.99~git20120913.8637f772-0ubuntu1
  version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.20.9-0ubuntu2
  version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 
1:1.0.2-0ubuntu3

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-input-synaptics/+bug/1070207/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1077510] Re: [BlackOps, Realtek ALC889A, Green Line Out, Rear] Underruns, dropouts or crackling sound

[jamesjordin]

Incidentally, I've reported this bug via Ubuntu Studio, rather than
Linux Mint or Mageia, as I intend moving to Ubuntu for my use - the
other two distributions are installed purely for evaluation by other
members of the family (just in case the bug supervisor assumes the same
bug will be submitted to Linux Mint and Mageia - it won't). Just FYI.

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to alsa-driver in Ubuntu.
https://bugs.launchpad.net/bugs/1077510

Title:
  [BlackOps, Realtek ALC889A, Green Line Out, Rear] Underruns, dropouts
  or crackling sound

Status in “alsa-driver” package in Ubuntu:
  Confirmed

Bug description:
  All audio sources tried produce the same result: stuttering/glitching
  sound when software mixer volume (NOT hardware/speaker volume) is
  turned up, no sound at all when mixer volume is low. Have tried online
  video (YouTube), and opening various audio file formats (wav, mp3,
  flac, ogg) using various applications (Audacious, VLC, Audacity, Movie
  Player) all with the same result.

  I have Ubuntu Studio installed on a multiboot system, alongside Linux
  Mint and Mageia (latest stable release of each as at 1 Nov 2012) - all
  of which are exhibiting the same problem.

  However, I still have my original installation of Windows 7, where the
  audio is working fine.

  I am following the instructions on this wiki page, hence why I'm reporting 
the bug:
  https://wiki.ubuntu.com/DebuggingSoundProblems

  Many thanks in advance! :)

  ProblemType: Bug
  DistroRelease: Ubuntu 12.10
  Package: alsa-base 1.0.25+dfsg-0ubuntu3
  ProcVersionSignature: Ubuntu 3.5.0-18.18-lowlatency 3.5.7
  Uname: Linux 3.5.0-18-lowlatency x86_64
  ApportVersion: 2.6.1-0ubuntu6
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC1:  james  1700 F xfce4-volumed
james  1753 F pulseaudio
   /dev/snd/controlC0:  james  1700 F xfce4-volumed
james  1753 F pulseaudio
  CurrentDmesg:
   [   16.898460] tg3 :04:00.0: eth0: Link is up at 100 Mbps, full duplex
   [   16.898463] tg3 :04:00.0: eth0: Flow control is off for TX and off 
for RX
   [   16.898804] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  Date: Sat Nov 10 22:27:50 2012
  InstallationDate: Installed on 2012-11-09 (1 days ago)
  InstallationMedia: Ubuntu-Studio 12.10 "Quantal Quetzal" - Release amd64 
(20121017.1)
  MarkForUpload: True
  PackageArchitecture: all
  SourcePackage: alsa-driver
  Symptom: audio
  Symptom_AlsaPlaybackTest: ALSA playback test through plughw:Intel failed
  Symptom_Card: Built-in Audio - HDA Intel
  Symptom_Jack: Green Line Out, Rear
  Symptom_Type: Underruns, dropouts, or "crackling" sound
  Title: [BlackOps, Realtek ALC889A, Green Line Out, Rear] Underruns, dropouts 
or crackling sound
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 05/08/2009
  dmi.bios.vendor: Phoenix Technologies, LTD
  dmi.bios.version: 6.00 PG
  dmi.board.name: BlackOps
  dmi.board.vendor: Foxconn
  dmi.board.version: FAB A
  dmi.chassis.type: 3
  dmi.chassis.vendor: OEM
  dmi.chassis.version: OEM
  dmi.modalias: 
dmi:bvnPhoenixTechnologies,LTD:bvr6.00PG:bd05/08/2009:svnFoxconn:pnBlackOps:pvrFABA:rvnFoxconn:rnBlackOps:rvrFABA:cvnOEM:ct3:cvrOEM:
  dmi.product.name: BlackOps
  dmi.product.version: FAB A
  dmi.sys.vendor: Foxconn

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1077510/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1070207] Re: Trackpoint doesn't work on Thinkpad L530

[Launchpad Bug Tracker]

Status changed to 'Confirmed' because the bug affects multiple users.

** Changed in: xserver-xorg-input-synaptics (Ubuntu)
   Status: New => Confirmed

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xserver-xorg-input-synaptics in Ubuntu.
https://bugs.launchpad.net/bugs/1070207

Title:
  Trackpoint doesn't work on Thinkpad L530

Status in “xserver-xorg-input-synaptics” package in Ubuntu:
  Confirmed
Status in “xserver-xorg-input-synaptics” package in Debian:
  New

Bug description:
  The trackpoint on my Thinkpad doesn't work. This is rather annoying,
  since I specifically bought it because it had Ubuntu hardware
  certification:

  http://www.ubuntu.com/certification/hardware/201202-10579/

  ProblemType: Bug
  DistroRelease: Ubuntu 12.10
  Package: xserver-xorg-input-synaptics 1.6.2-1ubuntu5
  ProcVersionSignature: Ubuntu 3.5.0-17.28-generic 3.5.5
  Uname: Linux 3.5.0-17-generic x86_64
  ApportVersion: 2.6.1-0ubuntu3
  Architecture: amd64
  Date: Tue Oct 23 07:55:58 2012
  DistUpgraded: 2012-10-19 12:30:38,295 DEBUG enabling apt cron job
  DistroCodename: quantal
  DistroVariant: ubuntu
  EcryptfsInUse: Yes
  InstallationMedia: Ubuntu 12.04 LTS "Precise Pangolin" - Release amd64 
(20120425)
  MachineType: LENOVO 24812TG
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.5.0-17-generic 
root=UUID=a6e4e235-d477-4e04-8f43-0b8a7ca5ed03 ro quiet splash vt.handoff=7
  SourcePackage: xserver-xorg-input-synaptics
  UpgradeStatus: Upgraded to quantal on 2012-10-19 (3 days ago)
  dmi.bios.date: 05/28/2012
  dmi.bios.vendor: LENOVO
  dmi.bios.version: G3ET34WW(1.08)
  dmi.board.asset.tag: Not Available
  dmi.board.name: 24812TG
  dmi.board.vendor: LENOVO
  dmi.board.version: Not Available
  dmi.chassis.asset.tag: No Asset Information
  dmi.chassis.type: 10
  dmi.chassis.vendor: LENOVO
  dmi.chassis.version: Not Available
  dmi.modalias: 
dmi:bvnLENOVO:bvrG3ET34WW(1.08):bd05/28/2012:svnLENOVO:pn24812TG:pvrThinkPadL530:rvnLENOVO:rn24812TG:rvrNotAvailable:cvnLENOVO:ct10:cvrNotAvailable:
  dmi.product.name: 24812TG
  dmi.product.version: ThinkPad L530
  dmi.sys.vendor: LENOVO
  version.compiz: compiz 1:0.9.8.4-0ubuntu3
  version.ia32-libs: ia32-libs 20090808ubuntu36
  version.libdrm2: libdrm2 2.4.39-0ubuntu1
  version.libgl1-mesa-dri: libgl1-mesa-dri 9.0-0ubuntu1
  version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A
  version.libgl1-mesa-glx: libgl1-mesa-glx 9.0-0ubuntu1
  version.xserver-xorg-core: xserver-xorg-core 2:1.13.0-0ubuntu6
  version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.7.3-0ubuntu2
  version.xserver-xorg-video-ati: xserver-xorg-video-ati 
1:6.99.99~git20120913.8637f772-0ubuntu1
  version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.20.9-0ubuntu2
  version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 
1:1.0.2-0ubuntu3

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-input-synaptics/+bug/1070207/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1076872] Re: [HP Probook 4530s] Unity does not load with fglrx-installer in 12.10 AMD Radeon™ HD 6490M

[Michael Knopp]

Perhaps I was unclear. This is exactly what I attempted. Alien returns
this: "x11-video-fglrxG02-HP-8.905-1.1.i586.rpm is for architecture i386
; the package cannot be built on this system"

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to fglrx-installer in Ubuntu.
https://bugs.launchpad.net/bugs/1076872

Title:
  [HP Probook 4530s] Unity does not load with fglrx-installer in 12.10
  AMD Radeon™ HD 6490M

Status in “fglrx-installer” package in Ubuntu:
  Incomplete

Bug description:
  After installing fglrx-installer, upon reboot Unity did not load.

  Tried
  https://launchpad.net/~andrikos/+archive/ppa?field.series_filter=quantal
  but this did not work.

  HP offers a linux version of fglrx tailored to the HP Probook 4530s
  
http://h2.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=5060882&prodTypeId=321957&prodSeriesId=5060880&swLang=13&taskId=135&swEnvOID=2020#11360
  .

  ProblemType: Bug
  DistroRelease: Ubuntu 12.10
  Package: xorg 1:7.7+1ubuntu4
  ProcVersionSignature: Ubuntu 3.5.0-18.29-generic 3.5.7
  Uname: Linux 3.5.0-18-generic x86_64
  ApportVersion: 2.6.1-0ubuntu6
  Architecture: amd64
  CompizPlugins: No value set for 
`/apps/compiz-1/general/screen0/options/active_plugins'
  Date: Thu Nov  8 21:06:20 2012
  DistUpgraded: Fresh install
  DistroCodename: quantal
  DistroVariant: ubuntu
  DkmsStatus: fglrx, 9.000: added
  ExtraDebuggingInterest: Yes, if not too technical
  GraphicsCard:
   Intel Corporation 2nd Generation Core Processor Family Integrated Graphics 
Controller [8086:0116] (rev 09) (prog-if 00 [VGA controller])
     Subsystem: Hewlett-Packard Company Device [103c:167d]
   Advanced Micro Devices [AMD] nee ATI Caicos [Radeon HD 6400M/7400M Series] 
[1002:6760] (prog-if 00 [VGA controller])
     Subsystem: Hewlett-Packard Company Device [103c:167d]
  InstallationDate: Installed on 2012-11-09 (0 days ago)
  InstallationMedia: Ubuntu 12.10 "Quantal Quetzal" - Release amd64 (20121017.5)
  MachineType: Hewlett-Packard HP ProBook 4530s
  MarkForUpload: True
  ProcEnviron:
   TERM=linux
   PATH=(custom, no user)
   XDG_RUNTIME_DIR=
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.5.0-18-generic 
root=UUID=a36d78b5-4353-4a69-b908-60e66cf5c6f9 ro quiet splash vt.handoff=7
  SourcePackage: xorg
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 03/09/2012
  dmi.bios.vendor: Hewlett-Packard
  dmi.bios.version: 68SRR Ver. F.23
  dmi.board.name: 167C
  dmi.board.vendor: Hewlett-Packard
  dmi.board.version: KBC Version 22.21
  dmi.chassis.asset.tag: CNU12924N7
  dmi.chassis.type: 10
  dmi.chassis.vendor: Hewlett-Packard
  dmi.modalias: 
dmi:bvnHewlett-Packard:bvr68SRRVer.F.23:bd03/09/2012:svnHewlett-Packard:pnHPProBook4530s:pvrA0001D02:rvnHewlett-Packard:rn167C:rvrKBCVersion22.21:cvnHewlett-Packard:ct10:cvr:
  dmi.product.name: HP ProBook 4530s
  dmi.product.version: A0001D02
  dmi.sys.vendor: Hewlett-Packard
  version.compiz: compiz 1:0.9.8.4+bzr3407-0ubuntu1
  version.ia32-libs: ia32-libs N/A
  version.libdrm2: libdrm2 2.4.39-0ubuntu1
  version.libgl1-mesa-dri: libgl1-mesa-dri 9.0-0ubuntu1
  version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A
  version.libgl1-mesa-glx: libgl1-mesa-glx 9.0-0ubuntu1
  version.xserver-xorg-core: xserver-xorg-core 2:1.13.0-0ubuntu6
  version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.7.3-0ubuntu2
  version.xserver-xorg-video-ati: xserver-xorg-video-ati 
1:6.99.99~git20120913.8637f772-0ubuntu1
  version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.20.9-0ubuntu2
  version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 
1:1.0.2-0ubuntu3

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/fglrx-installer/+bug/1076872/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1077490] Re: Input method in Skype on amd64 after 12.04 breaks

[Ubuntu Foundation's Bug Bot]

The attachment "m-a support of ibus-qt4" of this bug report has been
identified as being a patch.  The ubuntu-reviewers team has been
subscribed to the bug report so that they can review the patch.  In the
event that this is in fact not a patch you can resolve this situation by
removing the tag 'patch' from the bug report and editing the attachment
so that it is not flagged as a patch.  Additionally, if you are member
of the ubuntu-reviewers team please also unsubscribe the team from this
bug report.

[This is an automated message performed by a Launchpad user owned by
Brian Murray.  Please contact him regarding any issues with the action
taken in this bug report.]

** Tags added: patch

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to ibus-qt in Ubuntu.
https://bugs.launchpad.net/bugs/1077490

Title:
  Input method in Skype on amd64 after 12.04 breaks

Status in “ibus-qt” package in Ubuntu:
  New

Bug description:
  Skype 4.0.0.8 is  32bit qt application.
  Input method should be done with qt-immodule, ibus-qt and arbitrary ibus 
input method engine.

  It works well with 32bit(i386) environment but there is a issue in
  64bit, amd64 environment.

  ibus-qt4 is not multi-arch supported. There cannot co-exist libibus-qt1 
:amd64, i386. so I cannot install libibus-qt1:i386.
  It make Skype cannot connect with ibus input method engine in amd64 
environment.

  In 12.04, dependent icu48 also don't support multi-arch, but it
  support m-a in 12.10.

  
  An attachment is a patch for ibut-qt4 to suport m-a and co-installable 
i386/amd64 libraries.

  I can use input-method in Skype 4.0.0.8 on amd64 environment with this
  patch and libicu48:i386/amd64  from 12.10.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/ibus-qt/+bug/1077490/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1077491]

[Ubuntu Foundation's Bug Bot]

The attachment "btcflash.8.diff" of this bug report has been identified
as being a patch.  The ubuntu-reviewers team has been subscribed to the
bug report so that they can review the patch.  In the event that this is
in fact not a patch you can resolve this situation by removing the tag
'patch' from the bug report and editing the attachment so that it is not
flagged as a patch.  Additionally, if you are member of the ubuntu-
reviewers team please also unsubscribe the team from this bug report.

[This is an automated message performed by a Launchpad user owned by
Brian Murray.  Please contact him regarding any issues with the action
taken in this bug report.]

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to dvd+rw-tools in Ubuntu.
https://bugs.launchpad.net/bugs/1077491

Title:
  btcflash.8: "\" instead of "\\" in the manual

Status in “dvd+rw-tools” package in Ubuntu:
  New

Bug description:
  Software: dvd+rw-tools
  Version: 7.1-6
  File: btcflash.8
  Patch: Yes

Warnings from "GROFF_ENCODING=utf8 groff -b -ww -mandoc -z ..."

  :17: warning: escape character ignored before `T'
  :17: warning: escape character ignored before `T'

  
  #
Output from "nroff" should (usually) have only the left margin
  adjusted (".ad l").  Otherwise the space between words can be too long.

Output for a manual should (usually) have the right margin ragged
  (".ad l"), as it is not (usually) intended for a book or other
  professional printing medium.

  #
Each sentence should begin in a new line.

  a) The space between sentences is different between formatters.

  b) Changes in one line do then not affect others, and do therefore not
  appear as changed in the output of "diff".

  #
Sometimes a small change in space between a roman and an italic
  character is needed (use ".RI" or ".IR" macros).

  #
Remove spaces at end of lines.

  #
Protect the last full stop (period) in abbreviations or ellipses
  (with \&) if it is not at the end of a sentence.

  #
Protect the full stop (period) at the beginning of text (word) or
  ellipsis.

  #
Protect a single quote (', apostrophe) (with \&) at the start of the
  quoted text.

  ##

  ProblemType: Bug
  Architecture: amd64
  Date: Sat Nov 10 21:42:48 2012
  Dependencies:  
   coreutils 7.4-2ubuntu3
   debconf 1.5.28ubuntu4
   debconf-i18n 1.5.28ubuntu4
   dpkg 1.15.5.6ubuntu4.6
   findutils 4.4.2-1ubuntu1
   gcc-4.4-base 4.4.3-4ubuntu5.1
   genisoimage 9:1.1.10-1ubuntu1
   libacl1 2.2.49-2
   libattr1 1:2.4.44-1
   libbz2-1.0 1.0.5-4ubuntu0.2
   libc-bin 2.11.1-0ubuntu7.11
   libc6 2.11.1-0ubuntu7.11
   libgcc1 1:4.4.3-4ubuntu5.1
   liblocale-gettext-perl 1.05-6
   libmagic1 5.03-5ubuntu1
   libselinux1 2.0.89-4
   libstdc++6 4.4.3-4ubuntu5.1
   libtext-charwidth-perl 0.04-6
   libtext-iconv-perl 1.7-2
   libtext-wrapi18n-perl 0.06-7
   lzma 4.43-14ubuntu2
   perl-base 5.10.1-8ubuntu2.1
   tzdata 2012e-0ubuntu0.10.04
   zlib1g 1:1.2.3.3.dfsg-15ubuntu1
  DistroRelease: Ubuntu 10.04
  Package: dvd+rw-tools 7.1-6
  PackageArchitecture: amd64
  ProcEnviron:
   PATH=(custom, no user)
   LOCPATH=/var/tmp/username/lib/locale
   LANG=is_IS.ISO-8859-1
   SHELL=/bin/csh
  ProcVersionSignature: Ubuntu 2.6.35-25.44~lucid1-generic 2.6.35.10
  SourcePackage: dvd+rw-tools
  Tags: lucid
  Uname: Linux 2.6.35-25-generic x86_64
   
   
Patch is in the attachment

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/dvd+rw-tools/+bug/1077491/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1077523] [NEW] fails to connect to wifi for a while after suspend

[Arild]

Public bug reported:

After wake-up from suspend, I'm not connected automatically to wlan.
Network-manager does automatically attempt to connect but I get a
password dialog (containing the correct password). Upon confirmation it
retries, fails after ~8 s, and shows dialog again. By 3-5 retries it
will succeed.

I'm on Quantal on a Lenovo S205. In Precise I didn't have this problem.
Nothing has been changed in the wlan configuration.

ProblemType: Bug
DistroRelease: Ubuntu 12.10
Package: network-manager 0.9.6.0-0ubuntu7
ProcVersionSignature: Ubuntu 3.5.0-18.29-generic 3.5.7
Uname: Linux 3.5.0-18-generic x86_64
NonfreeKernelModules: fglrx
ApportVersion: 2.6.1-0ubuntu6
Architecture: amd64
CRDA:
 country GB:
(2402 - 2482 @ 40), (N/A, 20)
(5170 - 5250 @ 40), (N/A, 20)
(5250 - 5330 @ 40), (N/A, 20), DFS
(5490 - 5710 @ 40), (N/A, 27), DFS
Date: Sun Nov 11 01:03:17 2012
IfupdownConfig:
 auto lo
 iface lo inet loopback
InstallationDate: Installed on 2012-04-27 (197 days ago)
InstallationMedia: Ubuntu 12.04 LTS "Precise Pangolin" - Release amd64 
(20120425)
IpRoute:
 default via 192.168.0.1 dev wlan0  proto static 
 169.254.0.0/16 dev wlan0  scope link  metric 1000 
 192.168.0.0/24 dev wlan0  proto kernel  scope link  src 192.168.0.105  metric 9
MarkForUpload: True
NetworkManager.state:
 [main]
 NetworkingEnabled=true
 WirelessEnabled=true
 WWANEnabled=true
 WimaxEnabled=true
SourcePackage: network-manager
UpgradeStatus: Upgraded to quantal on 2012-10-25 (16 days ago)
WifiSyslog: Nov 11 00:55:52 hemul wpa_supplicant[1142]: wlan0: WPA: Group 
rekeying completed with 1c:af:f7:2c:06:e8 [GTK=TKIP]
nmcli-dev:
 DEVICE TYPE  STATE DBUS-PATH   
   
 wlan0  802-11-wireless   connected 
/org/freedesktop/NetworkManager/Devices/1  
 eth0   802-3-ethernetunavailable   
/org/freedesktop/NetworkManager/Devices/0
nmcli-nm:
 RUNNING VERSIONSTATE   NET-ENABLED   WIFI-HARDWARE   WIFI  
 WWAN-HARDWARE   WWAN  
 running 0.9.6.0connected   enabled   enabled 
enabledenabled enabled

** Affects: network-manager (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: amd64 apport-bug quantal running-unity

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to network-manager in Ubuntu.
https://bugs.launchpad.net/bugs/1077523

Title:
  fails to connect to wifi for a while after suspend

Status in “network-manager” package in Ubuntu:
  New

Bug description:
  After wake-up from suspend, I'm not connected automatically to wlan.
  Network-manager does automatically attempt to connect but I get a
  password dialog (containing the correct password). Upon confirmation
  it retries, fails after ~8 s, and shows dialog again. By 3-5 retries
  it will succeed.

  I'm on Quantal on a Lenovo S205. In Precise I didn't have this
  problem. Nothing has been changed in the wlan configuration.

  ProblemType: Bug
  DistroRelease: Ubuntu 12.10
  Package: network-manager 0.9.6.0-0ubuntu7
  ProcVersionSignature: Ubuntu 3.5.0-18.29-generic 3.5.7
  Uname: Linux 3.5.0-18-generic x86_64
  NonfreeKernelModules: fglrx
  ApportVersion: 2.6.1-0ubuntu6
  Architecture: amd64
  CRDA:
   country GB:
(2402 - 2482 @ 40), (N/A, 20)
(5170 - 5250 @ 40), (N/A, 20)
(5250 - 5330 @ 40), (N/A, 20), DFS
(5490 - 5710 @ 40), (N/A, 27), DFS
  Date: Sun Nov 11 01:03:17 2012
  IfupdownConfig:
   auto lo
   iface lo inet loopback
  InstallationDate: Installed on 2012-04-27 (197 days ago)
  InstallationMedia: Ubuntu 12.04 LTS "Precise Pangolin" - Release amd64 
(20120425)
  IpRoute:
   default via 192.168.0.1 dev wlan0  proto static 
   169.254.0.0/16 dev wlan0  scope link  metric 1000 
   192.168.0.0/24 dev wlan0  proto kernel  scope link  src 192.168.0.105  
metric 9
  MarkForUpload: True
  NetworkManager.state:
   [main]
   NetworkingEnabled=true
   WirelessEnabled=true
   WWANEnabled=true
   WimaxEnabled=true
  SourcePackage: network-manager
  UpgradeStatus: Upgraded to quantal on 2012-10-25 (16 days ago)
  WifiSyslog: Nov 11 00:55:52 hemul wpa_supplicant[1142]: wlan0: WPA: Group 
rekeying completed with 1c:af:f7:2c:06:e8 [GTK=TKIP]
  nmcli-dev:
   DEVICE TYPE  STATE DBUS-PATH 
 
   wlan0  802-11-wireless   connected 
/org/freedesktop/NetworkManager/Devices/1  
   eth0   802-3-ethernetunavailable   
/org/freedesktop/NetworkManager/Devices/0
  nmcli-nm:
   RUNNING VERSIONSTATE   NET-ENABLED   WIFI-HARDWARE   
WIFI   WWAN-HARDWARE   WWAN  
   running 0.9.6.0connected   enabled   enabled 
enabledenabled enabled

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1077523/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-

[Desktop-packages] [Bug 1077522] [NEW] Wrong PPD (again) for HP LaserJet 5

[Paul Abrahams]

Public bug reported:

The PPD that I get for the HP LaserJet 5 with a fully updated Kubuntu
12.04 is the wrong one.  Twice before I've had the correct one, only to
have an update bring back the wrong one.   The correct one is what I get
when I select the "old" PPD while installing the printer using Kubuntu's
System Settings.  The wrong one goes into duplex mode automatically and
doesn't recognize the request to turn duplexing off.

** Affects: cups (Ubuntu)
 Importance: Undecided
 Status: New

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to cups in Ubuntu.
https://bugs.launchpad.net/bugs/1077522

Title:
  Wrong PPD (again) for HP LaserJet 5

Status in “cups” package in Ubuntu:
  New

Bug description:
  The PPD that I get for the HP LaserJet 5 with a fully updated Kubuntu
  12.04 is the wrong one.  Twice before I've had the correct one, only
  to have an update bring back the wrong one.   The correct one is what
  I get when I select the "old" PPD while installing the printer using
  Kubuntu's System Settings.  The wrong one goes into duplex mode
  automatically and doesn't recognize the request to turn duplexing off.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/cups/+bug/1077522/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 865111] Re: X quits, instead of waiting for kernel module to load

[Russell Sears]

I'm also seeing this in ubuntu 12.04.  As a workaround, I added a "sleep
5" to the top of the "script" section in /etc/init/gdm.conf and
/etc/init/lightdm.conf

Like other posters on duplicate bugs, according to /var/log/Xorg.0.log
and dmesg, X bombs out a bit under 5 seconds after boot (after the
kernel module starts loading), and the kernel module finishes loading at
a bit under 6 seconds.

It looks like X needs to wait for the kernel module to come up.

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to nvidia-graphics-drivers in Ubuntu.
https://bugs.launchpad.net/bugs/865111

Title:
  X quits, instead of waiting for kernel module to load

Status in “nvidia-graphics-drivers” package in Ubuntu:
  Confirmed

Bug description:
  Symptom: I'm left at a text screen listing starting services, instead of 
starting lightdm.
  Workaround: Switch to VT (Ctrl-Alt-F1), and in a root shell execute "stop 
lightdm; start lightdm"
  Relevant Dmesg: http://paste.ubuntu.com/701496/
  Relevant X log: http://paste.ubuntu.com/701490/

   diwic: ok, so it start's loading the module at 3.9s, X barfs at 
4.4s, and then at 5.1s the loading is complete
   an interesting race condition.. maybe a bug in the xserver
   diwic: or in the nvidia driver rather

  ProblemType: Bug
  DistroRelease: Ubuntu 11.10
  Package: nvidia-current 280.13-0ubuntu5
  ProcVersionSignature: Ubuntu 3.0.0-12.19-generic 3.0.4
  Uname: Linux 3.0.0-12-generic x86_64
  NonfreeKernelModules: nvidia
  .proc.driver.nvidia.gpus.0: Error: [Errno 21] Is a directory: 
'/proc/driver/nvidia/gpus/0'
  .proc.driver.nvidia.registry: Binary: ""
  .proc.driver.nvidia.version:
   NVRM version: NVIDIA UNIX x86_64 Kernel Module  280.13  Wed Jul 27 16:53:56 
PDT 2011
   GCC version:  gcc version 4.6.1 (Ubuntu/Linaro 4.6.1-9ubuntu3)
  .tmp.unity.support.test.0:

  ApportVersion: 1.23-0ubuntu2
  Architecture: amd64
  CompizPlugins: 
[core,bailer,detection,composite,opengl,decor,mousepoll,grid,imgpng,vpswitch,unitymtgrabhandles,wall,gnomecompat,resize,snap,move,place,compiztoolbox,regex,animation,session,expo,fade,workarounds,scale,ezoom,unityshell]
  CompositorRunning: compiz
  Date: Mon Oct  3 09:29:01 2011
  DistUpgraded: Fresh install
  DistroCodename: oneiric
  DistroVariant: ubuntu
  DkmsStatus: nvidia-current, 280.13, 3.0.0-12-generic, x86_64: installed
  GraphicsCard:
   nVidia Corporation GF108 [GeForce GT 430] [10de:0de1] (rev a1) (prog-if 00 
[VGA controller])
     Subsystem: nVidia Corporation Device [10de:]
  InstallationMedia: Ubuntu 11.10 "Oneiric Ocelot" - Alpha amd64 (20110802.1)
  JockeyStatus:
   xorg:nvidia_current - NVIDIA accelerated graphics driver (Proprietary, 
Enabled, In use)
   xorg:nvidia_current_updates - NVIDIA accelerated graphics driver 
(post-release updates) (Proprietary, Disabled, Not in use)
  MachineType: Gigabyte Technology Co., Ltd. GA-MA770T-UD3P
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.0.0-12-generic 
root=UUID=20d7bd2d-3fb5-4a38-b8fd-781d352fbe4e ro quiet splash vt.handoff=7
  SourcePackage: nvidia-graphics-drivers
  UpgradeStatus: No upgrade log present (probably fresh install)
  XorgConf:
   Section "Device"
    Identifier  "Default Device"
    Option  "NoLogo""True"
   EndSection
  dmi.bios.date: 06/24/2009
  dmi.bios.vendor: Award Software International, Inc.
  dmi.bios.version: F2
  dmi.board.name: GA-MA770T-UD3P
  dmi.board.vendor: Gigabyte Technology Co., Ltd.
  dmi.board.version: x.x
  dmi.chassis.type: 3
  dmi.chassis.vendor: Gigabyte Technology Co., Ltd.
  dmi.modalias: 
dmi:bvnAwardSoftwareInternational,Inc.:bvrF2:bd06/24/2009:svnGigabyteTechnologyCo.,Ltd.:pnGA-MA770T-UD3P:pvr:rvnGigabyteTechnologyCo.,Ltd.:rnGA-MA770T-UD3P:rvrx.x:cvnGigabyteTechnologyCo.,Ltd.:ct3:cvr:
  dmi.product.name: GA-MA770T-UD3P
  dmi.sys.vendor: Gigabyte Technology Co., Ltd.
  version.compiz: compiz 1:0.9.6+bzr20110929-0ubuntu1
  version.ia32-libs: ia32-libs 20090808ubuntu25
  version.libdrm2: libdrm2 2.4.26-1ubuntu1
  version.libgl1-mesa-dri: libgl1-mesa-dri 7.11-0ubuntu3
  version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A
  version.libgl1-mesa-glx: libgl1-mesa-glx 7.11-0ubuntu3
  version.nvidia-graphics-drivers: nvidia-graphics-drivers N/A
  version.xserver-xorg: xserver-xorg 1:7.6+7ubuntu7
  version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.6.0-1ubuntu13
  version.xserver-xorg-video-ati: xserver-xorg-video-ati 
1:6.14.99~git20110811.g93fc084-0ubuntu1
  version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.15.901-1ubuntu2
  version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 
1:0.0.16+git20110411+8378443-1

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/nvidia-graphics-drivers/+bug/865111/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : 

[Desktop-packages] [Bug 1077516] [NEW] USB read/write errors turns monitor to text only display

[John Brondum]

Public bug reported:

  [Problem]
USB external disk read/writes which the systems reports by turning the monitor 
to text only, but X continues to work

  [Discussion]
Please refer to video, as it is slightly difficult to explain in writing only :)
http://ubuntuone.com/4co3KnLvJXAyryLT3FKWbZ

  [Workarounds]
Appears only to be happening when using a dual monitor setup. And the problem 
can be resolved by disconnecting the external monitor although not a permanent 
fix

  [System Environment]
Ubuntu 12.10 64bit
00:00.0 Host bridge: Intel Corporation 3rd Gen Core processor DRAM Controller 
(rev 09)
00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor 
Graphics Controller (rev 09)
00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family 
USB xHCI Host Controller (rev 04)
00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series 
Chipset Family MEI Controller #1 (rev 04)
00:16.3 Serial controller: Intel Corporation 7 Series/C210 Series Chipset 
Family KT Controller (rev 04)
00:19.0 Ethernet controller: Intel Corporation 82579LM Gigabit Network 
Connection (rev 04)
00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family 
USB Enhanced Host Controller #2 (rev 04)
00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family 
High Definition Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI 
Express Root Port 1 (rev c4)
00:1c.1 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI 
Express Root Port 2 (rev c4)
00:1c.2 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI 
Express Root Port 3 (rev c4)
00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family 
USB Enhanced Host Controller #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation QM77 Express Chipset LPC Controller (rev 
04)
00:1f.2 SATA controller: Intel Corporation 7 Series Chipset Family 6-port SATA 
Controller [AHCI mode] (rev 04)
00:1f.3 SMBus: Intel Corporation 7 Series/C210 Series Chipset Family SMBus 
Controller (rev 04)
02:00.0 System peripheral: Ricoh Co Ltd PCIe SDXC/MMC Host Controller (rev 07)
03:00.0 Network controller: Intel Corporation Centrino Advanced-N 6205 (rev 34)

ProblemType: Bug
DistroRelease: Ubuntu 12.10
Package: xorg 1:7.7+1ubuntu4
ProcVersionSignature: Ubuntu 3.5.0-18.29-generic 3.5.7
Uname: Linux 3.5.0-18-generic x86_64
.tmp.unity.support.test.0:
 
ApportVersion: 2.6.1-0ubuntu6
Architecture: amd64
CompizPlugins: No value set for 
`/apps/compiz-1/general/screen0/options/active_plugins'
CompositorRunning: compiz
Date: Sun Nov 11 10:24:12 2012
DistUpgraded: Fresh install
DistroCodename: quantal
DistroVariant: ubuntu
DkmsStatus: vboxhost, 4.2.4, 3.5.0-18-generic, x86_64: installed
ExtraDebuggingInterest: Yes, if not too technical
GraphicsCard:
 Intel Corporation 3rd Gen Core processor Graphics Controller [8086:0166] (rev 
09) (prog-if 00 [VGA controller])
   Subsystem: Lenovo Device [17aa:21f6]
InstallationDate: Installed on 2012-10-20 (21 days ago)
InstallationMedia: Ubuntu 12.10 "Quantal Quetzal" - Release amd64 (20121017.5)
MachineType: LENOVO 2359CTO
MarkForUpload: True
ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.5.0-18-generic 
root=UUID=58df012a-941b-41a5-81c5-81341f040158 ro quiet splash vt.handoff=7
SourcePackage: xorg
Symptom: display
UpgradeStatus: No upgrade log present (probably fresh install)
dmi.bios.date: 05/29/2012
dmi.bios.vendor: LENOVO
dmi.bios.version: G4ET37WW (1.12 )
dmi.board.asset.tag: Not Available
dmi.board.name: 2359CTO
dmi.board.vendor: LENOVO
dmi.board.version: Not Available
dmi.chassis.asset.tag: No Asset Information
dmi.chassis.type: 10
dmi.chassis.vendor: LENOVO
dmi.chassis.version: Not Available
dmi.modalias: 
dmi:bvnLENOVO:bvrG4ET37WW(1.12):bd05/29/2012:svnLENOVO:pn2359CTO:pvrThinkPadT530:rvnLENOVO:rn2359CTO:rvrNotAvailable:cvnLENOVO:ct10:cvrNotAvailable:
dmi.product.name: 2359CTO
dmi.product.version: ThinkPad T530
dmi.sys.vendor: LENOVO
version.compiz: compiz 1:0.9.8.4+bzr3407-0ubuntu1
version.ia32-libs: ia32-libs 20090808ubuntu36
version.libdrm2: libdrm2 2.4.39-0ubuntu1
version.libgl1-mesa-dri: libgl1-mesa-dri 9.0-0ubuntu1
version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A
version.libgl1-mesa-glx: libgl1-mesa-glx 9.0-0ubuntu1
version.xserver-xorg-core: xserver-xorg-core 2:1.13.0-0ubuntu6
version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.7.3-0ubuntu2
version.xserver-xorg-video-ati: xserver-xorg-video-ati 
1:6.99.99~git20120913.8637f772-0ubuntu1
version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.20.9-0ubuntu2
version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.2-0ubuntu3

** Affects: xorg (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: amd64 apport-bug compiz-0.9 quantal running-unity ubuntu

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xorg in Ubuntu.
https:

[Desktop-packages] [Bug 1040259] Re: FFE: libmessaging-menu transitions for quantal

[bwat47]

I'm going crazy with no pidgin support :(

I wish they didn't up and change the api so late in the cycle :/

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to gwibber in Ubuntu.
https://bugs.launchpad.net/bugs/1040259

Title:
  FFE: libmessaging-menu transitions for quantal

Status in Gmail Watcher:
  Triaged
Status in Lightread:
  New
Status in Quassel Irc Client:
  New
Status in Skype-wrapper:
  In Progress
Status in “evolution-indicator” package in Ubuntu:
  Triaged
Status in “gm-notify” package in Ubuntu:
  Triaged
Status in “gwibber” package in Ubuntu:
  Fix Released
Status in “indicator-messages” package in Ubuntu:
  Fix Released
Status in “kdenetwork” package in Ubuntu:
  New
Status in “kdepim” package in Ubuntu:
  New
Status in “libdbusmenu-qt” package in Ubuntu:
  New
Status in “libunity-webapps” package in Ubuntu:
  Fix Released
Status in “liferea” package in Ubuntu:
  Triaged
Status in “pidgin” package in Ubuntu:
  Confirmed
Status in “pidgin-libnotify” package in Ubuntu:
  Triaged
Status in “quassel” package in Ubuntu:
  New
Status in “smuxi” package in Ubuntu:
  Fix Released
Status in “telepathy-indicator” package in Ubuntu:
  Fix Released
Status in “thunderbird” package in Ubuntu:
  Fix Released
Status in “unity-mail” package in Ubuntu:
  Fix Released
Status in “xchat-indicator” package in Ubuntu:
  Fix Released
Status in “gm-notify” source package in Quantal:
  Triaged
Status in “gwibber” source package in Quantal:
  Fix Released
Status in “indicator-messages” source package in Quantal:
  Fix Released
Status in “kdenetwork” source package in Quantal:
  New
Status in “kdepim” source package in Quantal:
  New
Status in “libdbusmenu-qt” source package in Quantal:
  New
Status in “libunity-webapps” source package in Quantal:
  Fix Released
Status in “liferea” source package in Quantal:
  Triaged
Status in “pidgin” source package in Quantal:
  Confirmed
Status in “pidgin-libnotify” source package in Quantal:
  In Progress
Status in “quassel” source package in Quantal:
  New
Status in “smuxi” source package in Quantal:
  Fix Released
Status in “telepathy-indicator” source package in Quantal:
  Fix Released
Status in “thunderbird” source package in Quantal:
  Fix Released
Status in “unity-mail” source package in Quantal:
  Fix Released
Status in “xchat-indicator” source package in Quantal:
  Fix Released

Bug description:
  indicator-messages got updated, introducing a new libmessaging-menu
  api (deprecating the old libindicate library) which should make
  application developper's life easier.

  The indicator work is done and the library is ready and we started
  porting applications

  The current stack is being tested in https://launchpad.net/~ubuntu-
  desktop/+archive/ppa/

  It includes
  - indicator-messages
  - gwibber
  - indicator-telepathy
  - thunderbird (soon, work is being finished)

  which is what we consider the minimal set for landing the feature

  for quantal we will add those soon:
  - pidgin
  - xchat-indicator
  - evolution-indicator

To manage notifications about this bug go to:
https://bugs.launchpad.net/gmailwatcher/+bug/1040259/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1074615] Re: Internal microphone don't work on Acer AO722

[Sushenjit Bandyopadhyay]

How do I use this code fragment? Thanks.

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to alsa-driver in Ubuntu.
https://bugs.launchpad.net/bugs/1074615

Title:
  Internal microphone don't work on Acer AO722

Status in “alsa-driver” package in Ubuntu:
  Confirmed

Bug description:
  Internal microphone of netbook Acer AO722 seems don't work in 12.10.
  In previous releases I mute left channel of microphone in alsamixer and it 
began to work. But in new release this trick don't work anymore.

  ProblemType: Bug
  DistroRelease: Ubuntu 12.10
  Package: alsa-base 1.0.25+dfsg-0ubuntu3
  ProcVersionSignature: Ubuntu 3.5.0-18.29-generic 3.5.7
  Uname: Linux 3.5.0-18-generic i686
  NonfreeKernelModules: fglrx wl
  ApportVersion: 2.6.1-0ubuntu6
  Architecture: i386
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC1:  zws3055 F pulseaudio
   /dev/snd/pcmC1D0p:   zws3055 F...m pulseaudio
   /dev/snd/controlC0:  zws3055 F pulseaudio
  Date: Sat Nov  3 13:09:01 2012
  InstallationDate: Installed on 2012-08-26 (68 days ago)
  InstallationMedia: Ubuntu 12.10 "Quantal Quetzal" - Alpha i386 (20120826)
  MarkForUpload: True
  PackageArchitecture: all
  SourcePackage: alsa-driver
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 09/19/2011
  dmi.bios.vendor: Acer
  dmi.bios.version: V1.07
  dmi.board.asset.tag: Base Board Asset Tag
  dmi.board.name: JE10-BZ
  dmi.board.vendor: Acer
  dmi.board.version: Base Board Version
  dmi.chassis.type: 10
  dmi.chassis.vendor: Acer
  dmi.chassis.version: V1.07
  dmi.modalias: 
dmi:bvnAcer:bvrV1.07:bd09/19/2011:svnAcer:pnAO722:pvrV1.07:rvnAcer:rnJE10-BZ:rvrBaseBoardVersion:cvnAcer:ct10:cvrV1.07:
  dmi.product.name: AO722
  dmi.product.version: V1.07
  dmi.sys.vendor: Acer

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1074615/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1077510] Re: [BlackOps, Realtek ALC889A, Green Line Out, Rear] Underruns, dropouts or crackling sound

[Launchpad Bug Tracker]

Status changed to 'Confirmed' because the bug affects multiple users.

** Changed in: alsa-driver (Ubuntu)
   Status: New => Confirmed

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to alsa-driver in Ubuntu.
https://bugs.launchpad.net/bugs/1077510

Title:
  [BlackOps, Realtek ALC889A, Green Line Out, Rear] Underruns, dropouts
  or crackling sound

Status in “alsa-driver” package in Ubuntu:
  Confirmed

Bug description:
  All audio sources tried produce the same result: stuttering/glitching
  sound when software mixer volume (NOT hardware/speaker volume) is
  turned up, no sound at all when mixer volume is low. Have tried online
  video (YouTube), and opening various audio file formats (wav, mp3,
  flac, ogg) using various applications (Audacious, VLC, Audacity, Movie
  Player) all with the same result.

  I have Ubuntu Studio installed on a multiboot system, alongside Linux
  Mint and Mageia (latest stable release of each as at 1 Nov 2012) - all
  of which are exhibiting the same problem.

  However, I still have my original installation of Windows 7, where the
  audio is working fine.

  I am following the instructions on this wiki page, hence why I'm reporting 
the bug:
  https://wiki.ubuntu.com/DebuggingSoundProblems

  Many thanks in advance! :)

  ProblemType: Bug
  DistroRelease: Ubuntu 12.10
  Package: alsa-base 1.0.25+dfsg-0ubuntu3
  ProcVersionSignature: Ubuntu 3.5.0-18.18-lowlatency 3.5.7
  Uname: Linux 3.5.0-18-lowlatency x86_64
  ApportVersion: 2.6.1-0ubuntu6
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC1:  james  1700 F xfce4-volumed
james  1753 F pulseaudio
   /dev/snd/controlC0:  james  1700 F xfce4-volumed
james  1753 F pulseaudio
  CurrentDmesg:
   [   16.898460] tg3 :04:00.0: eth0: Link is up at 100 Mbps, full duplex
   [   16.898463] tg3 :04:00.0: eth0: Flow control is off for TX and off 
for RX
   [   16.898804] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  Date: Sat Nov 10 22:27:50 2012
  InstallationDate: Installed on 2012-11-09 (1 days ago)
  InstallationMedia: Ubuntu-Studio 12.10 "Quantal Quetzal" - Release amd64 
(20121017.1)
  MarkForUpload: True
  PackageArchitecture: all
  SourcePackage: alsa-driver
  Symptom: audio
  Symptom_AlsaPlaybackTest: ALSA playback test through plughw:Intel failed
  Symptom_Card: Built-in Audio - HDA Intel
  Symptom_Jack: Green Line Out, Rear
  Symptom_Type: Underruns, dropouts, or "crackling" sound
  Title: [BlackOps, Realtek ALC889A, Green Line Out, Rear] Underruns, dropouts 
or crackling sound
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 05/08/2009
  dmi.bios.vendor: Phoenix Technologies, LTD
  dmi.bios.version: 6.00 PG
  dmi.board.name: BlackOps
  dmi.board.vendor: Foxconn
  dmi.board.version: FAB A
  dmi.chassis.type: 3
  dmi.chassis.vendor: OEM
  dmi.chassis.version: OEM
  dmi.modalias: 
dmi:bvnPhoenixTechnologies,LTD:bvr6.00PG:bd05/08/2009:svnFoxconn:pnBlackOps:pvrFABA:rvnFoxconn:rnBlackOps:rvrFABA:cvnOEM:ct3:cvrOEM:
  dmi.product.name: BlackOps
  dmi.product.version: FAB A
  dmi.sys.vendor: Foxconn

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1077510/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1077366] Re: [G31M-ES2L, Realtek ALC883, Green Line Out, Rear] No sound at all

[Raymond]

Realtek ALC883/888B codec 
High Definition Audio 
2/4/5.1/7.1-channel
 * To configure 7.1-channel audio, you need connect with the port of HD Audio 
standard via front panel and enable the multi-channe l audio feature through 
the audio driver. 
Support for S/PDIF Out 
Support for CD In

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to alsa-driver in Ubuntu.
https://bugs.launchpad.net/bugs/1077366

Title:
  [G31M-ES2L, Realtek ALC883, Green Line Out, Rear] No sound at all

Status in “alsa-driver” package in Ubuntu:
  New

Bug description:
  PLease fix the bug please

  ProblemType: Bug
  DistroRelease: Ubuntu 12.04
  Package: alsa-base 1.0.25+dfsg-0ubuntu1
  ProcVersionSignature: Ubuntu 3.2.0-32.51-generic 3.2.30
  Uname: Linux 3.2.0-32-generic i686
  AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24.
  ApportVersion: 2.0.1-0ubuntu14
  Architecture: i386
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  webwerks   1683 F pulseaudio
  Card0.Amixer.info:
   Card hw:0 'Intel'/'HDA Intel at 0xfdff8000 irq 44'
 Mixer name : 'Realtek ALC883'
 Components : 'HDA:10ec0883,1458c603,0012'
 Controls  : 42
 Simple ctrls  : 22
  CurrentDmesg: [   16.922246] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  Date: Sat Nov 10 20:12:36 2012
  InstallationMedia: Ubuntu 11.04 "Natty Narwhal" - Release i386 (20110427)
  PackageArchitecture: all
  ProcEnviron:
   LANGUAGE=en_IN:en
   TERM=xterm
   PATH=(custom, no user)
   LANG=en_IN
   SHELL=/bin/bash
  SourcePackage: alsa-driver
  Symptom: audio
  Symptom_AlsaPlaybackTest: ALSA playback test through plughw:Intel failed
  Symptom_Card: Built-in Audio - HDA Intel
  Symptom_DevicesInUse:
   1683  webwerks  F pulseaudio
   PID ACCESS COMMAND
  Symptom_Jack: Green Line Out, Rear
  Symptom_Type: No sound at all
  Title: [G31M-ES2L, Realtek ALC883, Green Line Out, Rear] No sound at all
  UpgradeStatus: Upgraded to precise on 2012-10-23 (18 days ago)
  dmi.bios.date: 09/29/2009
  dmi.bios.vendor: Award Software International, Inc.
  dmi.bios.version: F10
  dmi.board.name: G31M-ES2L
  dmi.board.vendor: Gigabyte Technology Co., Ltd.
  dmi.chassis.type: 3
  dmi.chassis.vendor: Gigabyte Technology Co., Ltd.
  dmi.modalias: 
dmi:bvnAwardSoftwareInternational,Inc.:bvrF10:bd09/29/2009:svnGigabyteTechnologyCo.,Ltd.:pnG31M-ES2L:pvr:rvnGigabyteTechnologyCo.,Ltd.:rnG31M-ES2L:rvr:cvnGigabyteTechnologyCo.,Ltd.:ct3:cvr:
  dmi.product.name: G31M-ES2L
  dmi.sys.vendor: Gigabyte Technology Co., Ltd.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1077366/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1077512] Re: xserver-xorg-video-intel regression, video playback not smooth on external display after video driver update

[Mikael Hartzell]

** Attachment added: "lspci.txt"
   
https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-video-intel/+bug/1077512/+attachment/3430005/+files/lspci.txt

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xserver-xorg-video-intel in Ubuntu.
https://bugs.launchpad.net/bugs/1077512

Title:
  xserver-xorg-video-intel regression, video playback not smooth on
  external display after video driver update

Status in “xserver-xorg-video-intel” package in Ubuntu:
  New

Bug description:
  Hardware
  ---
  - HP Probook 4510s Laptop (Dual core Intel Celeron) with Intel internal 
graphics GM45 (Mobile Intel GMA 4500MHD).
  - Sony KDL-32W4000 TV as external display, resolution 1920x1080, connected to 
laptops HDMI - port. The brand of the external display probably has nothing to 
do with the bug.

  Software
  --
  - Ubuntu 12.04.1 LTS

  Description of the bug
  
  - Happens only if external HDMI display is connected to the laptop.
  - Started to happen when Ubuntu 12.04 (x86_64) delivered the first update to 
package xserver-xorg-video-intel, the version that shipped with Ubuntu 12.04 
release did not have this bug.
  - The display updates stops for a brief moment (approximately 5 - 10 frames).
  - Happens continuously repeating every 10 seconds.
  - kworker - process seems to do something modestly intensive always when the 
display glitch happens.
  - If you move the mouse pointer in a circle slowly with a continous speed, 
you can see that even the mouse pointer stops briefly every 10 seconds. 
  - The bug dissapears if I downgrade my xserver-xorg-video-intel driver to the 
version that originally shipped with Ubuntu 12.04 (xserver-xorg-video-intel 
version 2:2.17.0-1ubuntu4)

  
  How to reproduce the bug
  --
  - Attach an external 1920x1080 display to the HDMI - port of the laptop.
  - Install Ubuntu 12.04.1. Note: do not install updates during installation.
  - Install mesa-utils as we need the program glxgears to see the display 
glitch. You can see the buggy behaviour also playing any sort of video, but its 
easiest to see with glxgears.
  - Install synaptic because it can be used to easily force install different 
versions of the video driver.
  - After installation run synaptic and search for the package: 
xserver-xorg-video-intel verify that driver version is 2:2.17.0-1ubuntu4
  - Run glxgears and note that the 3D-gears it displays spin totally smoothly 
all the time.
  - Install all Ubuntu updates and reboot
  - Run glxgears and note that every 10 seconds the gears stops spinning for a 
brief moment and then jump forward a couple of frames. If you have top running 
you can see that every time the display glitch happens kworker jumps up in the 
process list, it does not consume much processor power but this seems to happen 
at approximately the same time as the video glitch.
  - Run synaptic, search for xserver-xorg-driver-intel   and note that the 
version is 2:2.17.0-1ubuntu4.2. Select the driver package and click on the 
"Package" - menu and select option "Force Version", select version 
2:2.17.0-1ubuntu4 and apply.
  - Now that we have the old driver installed, boot and run glxgears to see 
that the video glitch is gone.
  - Install all Ubuntu updates (this updates just the intel video driver as we 
just installed all the other updates) to see that the problem comes back, when 
the intel driver is updated.

  
  Things tested that don't have any affect, the buggy behaviour remains
  
---
  - Selecting a smaller resolution (1280x1024) for the extrenal display instead 
of the native 1920 x 1080.
  - Mirroring laptop internal display to the external display (forces both 
displays to the resolution of the internal display).
  - Using Ubuntu System Settings / Displays to turn of external or laptop 
internal monitor does not help, the display glitch is still there.
  - The bug happens also in Ubuntu 2D.
  - The bug happens also in Gnome Classic (No effects).

  
  Things tested that have an affect, the buggy behaviour goes away
  

  - Starting up the computer without the external monitor. The bug is still 
there but the display glitch is very mild, meaning that the display still stops 
updating every 10 seconds but the stop is very very short, missing just 1 or 2 
frames.
  - Downgrading intel xorg driver to 2:2.17.0-1ubuntu4. After downgrading to 
the version of the driver package that originally shipped with Ubuntu 12.04 the 
display glitch goes away.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-video-intel/+bug/1077512/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-pac

[Desktop-packages] [Bug 991155] Re: [G31M-ES2C, Realtek ALC883, Pink Mic, Front] No sound at all

[Raymond]

http://www.gigabyte.com/products/product-page.aspx?pid=3135#sp


Realtek ALC883 codec 
High Definition Audio 
2/4/5.1/7.1-channel (Note) 
Support for S/PDIF Out 
Support for CD In 
 Note: To configure 7.1-channel audio, you need connect with the port of HD 
Audio standard via front panel and enable the multi-channel audio feature 
through the audio driver.

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to alsa-driver in Ubuntu.
https://bugs.launchpad.net/bugs/991155

Title:
  [G31M-ES2C, Realtek ALC883, Pink Mic, Front] No sound at all

Status in “alsa-driver” package in Ubuntu:
  Confirmed

Bug description:
  Description:  Ubuntu 12.04 LTS
  Release:  12.04

  On 11.10 the microphone works perfectly, before upgrade to 12.04, the
  microphone stopped works.

  ProblemType: Bug
  DistroRelease: Ubuntu 12.04
  Package: alsa-base 1.0.25+dfsg-0ubuntu1
  ProcVersionSignature: Ubuntu 3.2.0-24.37-generic 3.2.14
  Uname: Linux 3.2.0-24-generic x86_64
  NonfreeKernelModules: nvidia
  AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24.
  ApportVersion: 2.0.1-0ubuntu7
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  ivan   2633 F pulseaudio
  Card0.Amixer.info:
   Card hw:0 'Intel'/'HDA Intel at 0xd520 irq 44'
 Mixer name : 'Realtek ALC883'
 Components : 'HDA:10ec0883,1458c603,0012'
 Controls  : 42
 Simple ctrls  : 22
  Date: Sun Apr 29 11:42:51 2012
  InstallationMedia: Ubuntu 11.10 "Oneiric Ocelot" - Beta amd64 (20111004)
  PackageArchitecture: all
  SourcePackage: alsa-driver
  Symptom: audio
  Symptom_AlsaRecordingTest: ALSA recording test through plughw:Intel failed
  Symptom_Card: Áudio embutido - HDA Intel
  Symptom_DevicesInUse:
   2633  ivan  F pulseaudio
   PID ACCESS COMMAND
  Symptom_Jack: Pink Mic, Front
  Symptom_Type: No sound at all
  Title: [G31M-ES2C, Realtek ALC883, Pink Mic, Front] No sound at all
  UpgradeStatus: Upgraded to precise on 2012-04-22 (7 days ago)
  dmi.bios.date: 12/29/2008
  dmi.bios.vendor: Award Software International, Inc.
  dmi.bios.version: F5
  dmi.board.name: G31M-S2C
  dmi.board.vendor: Gigabyte Technology Co., Ltd.
  dmi.board.version: x.x
  dmi.chassis.type: 3
  dmi.chassis.vendor: Gigabyte Technology Co., Ltd.
  dmi.modalias: 
dmi:bvnAwardSoftwareInternational,Inc.:bvrF5:bd12/29/2008:svnGigabyteTechnologyCo.,Ltd.:pnG31M-ES2C:pvr:rvnGigabyteTechnologyCo.,Ltd.:rnG31M-S2C:rvrx.x:cvnGigabyteTechnologyCo.,Ltd.:ct3:cvr:
  dmi.product.name: G31M-ES2C
  dmi.sys.vendor: Gigabyte Technology Co., Ltd.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/991155/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1077512] [NEW] xserver-xorg-video-intel regression, video playback not smooth on external display after video driver update

[Mikael Hartzell]

Public bug reported:

Hardware
---
- HP Probook 4510s Laptop (Dual core Intel Celeron) with Intel internal 
graphics GM45 (Mobile Intel GMA 4500MHD).
- Sony KDL-32W4000 TV as external display, resolution 1920x1080, connected to 
laptops HDMI - port. The brand of the external display probably has nothing to 
do with the bug.

Software
--
- Ubuntu 12.04.1 LTS

Description of the bug

- Happens only if external HDMI display is connected to the laptop.
- Started to happen when Ubuntu 12.04 (x86_64) delivered the first update to 
package xserver-xorg-video-intel, the version that shipped with Ubuntu 12.04 
release did not have this bug.
- The display updates stops for a brief moment (approximately 5 - 10 frames).
- Happens continuously repeating every 10 seconds.
- kworker - process seems to do something modestly intensive always when the 
display glitch happens.
- If you move the mouse pointer in a circle slowly with a continous speed, you 
can see that even the mouse pointer stops briefly every 10 seconds. 
- The bug dissapears if I downgrade my xserver-xorg-video-intel driver to the 
version that originally shipped with Ubuntu 12.04 (xserver-xorg-video-intel 
version 2:2.17.0-1ubuntu4)


How to reproduce the bug
--
- Attach an external 1920x1080 display to the HDMI - port of the laptop.
- Install Ubuntu 12.04.1. Note: do not install updates during installation.
- Install mesa-utils as we need the program glxgears to see the display glitch. 
You can see the buggy behaviour also playing any sort of video, but its easiest 
to see with glxgears.
- Install synaptic because it can be used to easily force install different 
versions of the video driver.
- After installation run synaptic and search for the package: 
xserver-xorg-video-intel verify that driver version is 2:2.17.0-1ubuntu4
- Run glxgears and note that the 3D-gears it displays spin totally smoothly all 
the time.
- Install all Ubuntu updates and reboot
- Run glxgears and note that every 10 seconds the gears stops spinning for a 
brief moment and then jump forward a couple of frames. If you have top running 
you can see that every time the display glitch happens kworker jumps up in the 
process list, it does not consume much processor power but this seems to happen 
at approximately the same time as the video glitch.
- Run synaptic, search for xserver-xorg-driver-intel   and note that the 
version is 2:2.17.0-1ubuntu4.2. Select the driver package and click on the 
"Package" - menu and select option "Force Version", select version 
2:2.17.0-1ubuntu4 and apply.
- Now that we have the old driver installed, boot and run glxgears to see that 
the video glitch is gone.
- Install all Ubuntu updates (this updates just the intel video driver as we 
just installed all the other updates) to see that the problem comes back, when 
the intel driver is updated.


Things tested that don't have any affect, the buggy behaviour remains
---
- Selecting a smaller resolution (1280x1024) for the extrenal display instead 
of the native 1920 x 1080.
- Mirroring laptop internal display to the external display (forces both 
displays to the resolution of the internal display).
- Using Ubuntu System Settings / Displays to turn of external or laptop 
internal monitor does not help, the display glitch is still there.
- The bug happens also in Ubuntu 2D.
- The bug happens also in Gnome Classic (No effects).


Things tested that have an affect, the buggy behaviour goes away

- Starting up the computer without the external monitor. The bug is still there 
but the display glitch is very mild, meaning that the display still stops 
updating every 10 seconds but the stop is very very short, missing just 1 or 2 
frames.
- Downgrading intel xorg driver to 2:2.17.0-1ubuntu4. After downgrading to the 
version of the driver package that originally shipped with Ubuntu 12.04 the 
display glitch goes away.

** Affects: xserver-xorg-video-intel (Ubuntu)
 Importance: Undecided
 Status: New

** Attachment added: "Xorg.0.log"
   https://bugs.launchpad.net/bugs/1077512/+attachment/3430004/+files/Xorg.0.log

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xserver-xorg-video-intel in Ubuntu.
https://bugs.launchpad.net/bugs/1077512

Title:
  xserver-xorg-video-intel regression, video playback not smooth on
  external display after video driver update

Status in “xserver-xorg-video-intel” package in Ubuntu:
  New

Bug description:
  Hardware
  ---
  - HP Probook 4510s Laptop (Dual core Intel Celeron) with Intel internal 
graphics GM45 (Mobile Intel GMA 4500MHD).
  - Sony KDL-32W4000 TV as external display, resolution 1920x1080, connected to 
laptops 

[Desktop-packages] [Bug 658004] Re: brasero dvd capacity estimation is broken

[David Balažic]

Still same in 3.4.1-0ubuntu2  (Ubuntu 12.10)

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to brasero in Ubuntu.
https://bugs.launchpad.net/bugs/658004

Title:
  brasero dvd capacity estimation is broken

Status in A disc burning application for gnome 2:
  New
Status in “brasero” package in Ubuntu:
  Triaged

Bug description:
  Binary package hint: brasero

  ubuntu-10.10-desktop-i386.iso live env.
  GNOME 2.32
  brasero 2.32.0-0ubuntu2
  nautilus 1:2.32.0-0ubuntu1

  Brasero claims an iso file is too large for the disc.
  The inserted disc is a blanked DVD+RW.
  The file is 4,700,372,992 bytes big, which is the official capacity of DVD+RW 
discs (as per wikipedia and other sources).

  What I did:
   - insert a DVD+RW with content
   - cp /dev/sr0 dvd.iso
   - check dvd.iso size to be 4,700,372,992 bytes
   - right click dvd.iso and select Write to Disc...

  Result:
  The brasero/nautilus dialog claims: The data size is too large for the disc 
even with the overburn option.

To manage notifications about this bug go to:
https://bugs.launchpad.net/brasero/+bug/658004/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 931063] Re: [G31M-ES2L, Realtek ALC883, Blue Line In, Rear] No sound at all

[Raymond]

http://www.gigabyte.com/products/product-page.aspx?pid=3598#sp

Realtek ALC883/888B codec 
High Definition Audio 
2/4/5.1/7.1-channel
 * To configure 7.1-channel audio, you need connect with the port of HD Audio 
standard via front panel and enable the multi-channe l audio feature through 
the audio driver.

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to alsa-driver in Ubuntu.
https://bugs.launchpad.net/bugs/931063

Title:
  [G31M-ES2L, Realtek ALC883, Blue Line In, Rear] No sound at all

Status in “alsa-driver” package in Ubuntu:
  New

Bug description:
  Actually what I'd like the line-in jack to do is to play sound when
  the speaker is connected, but it also doesn't record, so I'm guessing
  there's something seriously wrong with it.

  ProblemType: Bug
  DistroRelease: Ubuntu 11.10
  Package: alsa-base 1.0.24+dfsg-0ubuntu2
  ProcVersionSignature: Ubuntu 3.0.0-15.26-generic 3.0.13
  Uname: Linux 3.0.0-15-generic x86_64
  NonfreeKernelModules: fglrx
  AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24.
  ApportVersion: 1.23-0ubuntu4
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  pocike 1418 F pulseaudio
  Card0.Amixer.info:
   Card hw:0 'Intel'/'HDA Intel at 0xfdff8000 irq 43'
 Mixer name : 'Realtek ALC883'
 Components : 'HDA:10ec0883,1458c603,0012'
 Controls  : 40
 Simple ctrls  : 22
  Card1.Amixer.info:
   Card hw:1 'HDMI'/'HDA ATI HDMI at 0xfdcfc000 irq 44'
 Mixer name : 'ATI R6xx HDMI'
 Components : 'HDA:1002aa01,00aa0100,00100100'
 Controls  : 4
 Simple ctrls  : 1
  Card1.Amixer.values:
   Simple mixer control 'IEC958',0
 Capabilities: pswitch pswitch-joined penum
 Playback channels: Mono
 Mono: Playback [on]
  Date: Sun Feb 12 19:39:16 2012
  InstallationMedia: Ubuntu 11.10 "Oneiric Ocelot" - Release amd64 (20111012)
  PackageArchitecture: all
  ProcEnviron:
   PATH=(custom, no user)
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  SourcePackage: alsa-driver
  Symptom: audio
  Symptom_AlsaRecordingTest: ALSA recording test through plughw:Intel failed
  Symptom_Card: Internal Audio - HDA Intel
  Symptom_Jack: Blue Line In, Rear
  Symptom_Type: No sound at all
  Title: [G31M-ES2L, Realtek ALC883, Blue Line In, Rear] No sound at all
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 10/13/2009
  dmi.bios.vendor: Award Software International, Inc.
  dmi.bios.version: FF
  dmi.board.name: G31M-ES2L
  dmi.board.vendor: Gigabyte Technology Co., Ltd.
  dmi.board.version: x.x
  dmi.chassis.type: 3
  dmi.chassis.vendor: Gigabyte Technology Co., Ltd.
  dmi.modalias: 
dmi:bvnAwardSoftwareInternational,Inc.:bvrFF:bd10/13/2009:svnGigabyteTechnologyCo.,Ltd.:pnG31M-ES2L:pvr:rvnGigabyteTechnologyCo.,Ltd.:rnG31M-ES2L:rvrx.x:cvnGigabyteTechnologyCo.,Ltd.:ct3:cvr:
  dmi.product.name: G31M-ES2L
  dmi.sys.vendor: Gigabyte Technology Co., Ltd.
  mtime.conffile..etc.modprobe.d.alsa.base.conf: 2012-02-12T19:01:18.683311

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/931063/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1059633] Re: Emacs 'Ediff' Window Shrinks Horizontally To One Column Wide

[Ian Hutchinson]

Only way I've found to run ediff is to run a text emacs: $ emacs -nw and
Meta-x ediff from that.

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to emacs23 in Ubuntu.
https://bugs.launchpad.net/bugs/1059633

Title:
  Emacs 'Ediff' Window Shrinks Horizontally To One Column Wide

Status in “compiz” package in Ubuntu:
  Confirmed
Status in “emacs23” package in Ubuntu:
  Confirmed
Status in “emacs24” package in Ubuntu:
  Confirmed

Bug description:
  Unlike previously reported bug #941790, this bug involves a horizontal
  shrinkage to one column wide (multiple rows), and is still present in
  GNU Emacs 23.3.1.  Resizing the window isn't a work-around, as the
  window immediately shrinks again.  The behavior is observed as
  follows:

  Run ediff-buffers
  A new window, 'Ediff', opens and contains the text "Type ? for hlep" 
  In the 'Ediff' window, type the character '?',  This is supposed to display 
helpful info on the ediff commands
  Ediff window will expand, then shrink horizontally to one character wide
  Grabbing the frame and reszing will cause the shrinking behavior to repeat

  Releveant packages / versions:
  Ubuntu 12.04.1 LTS
  GNU Emacs 23.3.1
  Unity 5.16.0-0ubuntu1

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/compiz/+bug/1059633/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1077510] [NEW] [BlackOps, Realtek ALC889A, Green Line Out, Rear] Underruns, dropouts or crackling sound

[jamesjordin]

Public bug reported:

All audio sources tried produce the same result: stuttering/glitching
sound when software mixer volume (NOT hardware/speaker volume) is turned
up, no sound at all when mixer volume is low. Have tried online video
(YouTube), and opening various audio file formats (wav, mp3, flac, ogg)
using various applications (Audacious, VLC, Audacity, Movie Player) all
with the same result.

I have Ubuntu Studio installed on a multiboot system, alongside Linux
Mint and Mageia (latest stable release of each as at 1 Nov 2012) - all
of which are exhibiting the same problem.

However, I still have my original installation of Windows 7, where the
audio is working fine.

I am following the instructions on this wiki page, hence why I'm reporting the 
bug:
https://wiki.ubuntu.com/DebuggingSoundProblems

Many thanks in advance! :)

ProblemType: Bug
DistroRelease: Ubuntu 12.10
Package: alsa-base 1.0.25+dfsg-0ubuntu3
ProcVersionSignature: Ubuntu 3.5.0-18.18-lowlatency 3.5.7
Uname: Linux 3.5.0-18-lowlatency x86_64
ApportVersion: 2.6.1-0ubuntu6
Architecture: amd64
AudioDevicesInUse:
 USERPID ACCESS COMMAND
 /dev/snd/controlC1:  james  1700 F xfce4-volumed
  james  1753 F pulseaudio
 /dev/snd/controlC0:  james  1700 F xfce4-volumed
  james  1753 F pulseaudio
CurrentDmesg:
 [   16.898460] tg3 :04:00.0: eth0: Link is up at 100 Mbps, full duplex
 [   16.898463] tg3 :04:00.0: eth0: Flow control is off for TX and off for 
RX
 [   16.898804] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Date: Sat Nov 10 22:27:50 2012
InstallationDate: Installed on 2012-11-09 (1 days ago)
InstallationMedia: Ubuntu-Studio 12.10 "Quantal Quetzal" - Release amd64 
(20121017.1)
MarkForUpload: True
PackageArchitecture: all
SourcePackage: alsa-driver
Symptom: audio
Symptom_AlsaPlaybackTest: ALSA playback test through plughw:Intel failed
Symptom_Card: Built-in Audio - HDA Intel
Symptom_Jack: Green Line Out, Rear
Symptom_Type: Underruns, dropouts, or "crackling" sound
Title: [BlackOps, Realtek ALC889A, Green Line Out, Rear] Underruns, dropouts or 
crackling sound
UpgradeStatus: No upgrade log present (probably fresh install)
dmi.bios.date: 05/08/2009
dmi.bios.vendor: Phoenix Technologies, LTD
dmi.bios.version: 6.00 PG
dmi.board.name: BlackOps
dmi.board.vendor: Foxconn
dmi.board.version: FAB A
dmi.chassis.type: 3
dmi.chassis.vendor: OEM
dmi.chassis.version: OEM
dmi.modalias: 
dmi:bvnPhoenixTechnologies,LTD:bvr6.00PG:bd05/08/2009:svnFoxconn:pnBlackOps:pvrFABA:rvnFoxconn:rnBlackOps:rvrFABA:cvnOEM:ct3:cvrOEM:
dmi.product.name: BlackOps
dmi.product.version: FAB A
dmi.sys.vendor: Foxconn

** Affects: alsa-driver (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: amd64 apport-bug quantal

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to alsa-driver in Ubuntu.
https://bugs.launchpad.net/bugs/1077510

Title:
  [BlackOps, Realtek ALC889A, Green Line Out, Rear] Underruns, dropouts
  or crackling sound

Status in “alsa-driver” package in Ubuntu:
  New

Bug description:
  All audio sources tried produce the same result: stuttering/glitching
  sound when software mixer volume (NOT hardware/speaker volume) is
  turned up, no sound at all when mixer volume is low. Have tried online
  video (YouTube), and opening various audio file formats (wav, mp3,
  flac, ogg) using various applications (Audacious, VLC, Audacity, Movie
  Player) all with the same result.

  I have Ubuntu Studio installed on a multiboot system, alongside Linux
  Mint and Mageia (latest stable release of each as at 1 Nov 2012) - all
  of which are exhibiting the same problem.

  However, I still have my original installation of Windows 7, where the
  audio is working fine.

  I am following the instructions on this wiki page, hence why I'm reporting 
the bug:
  https://wiki.ubuntu.com/DebuggingSoundProblems

  Many thanks in advance! :)

  ProblemType: Bug
  DistroRelease: Ubuntu 12.10
  Package: alsa-base 1.0.25+dfsg-0ubuntu3
  ProcVersionSignature: Ubuntu 3.5.0-18.18-lowlatency 3.5.7
  Uname: Linux 3.5.0-18-lowlatency x86_64
  ApportVersion: 2.6.1-0ubuntu6
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC1:  james  1700 F xfce4-volumed
james  1753 F pulseaudio
   /dev/snd/controlC0:  james  1700 F xfce4-volumed
james  1753 F pulseaudio
  CurrentDmesg:
   [   16.898460] tg3 :04:00.0: eth0: Link is up at 100 Mbps, full duplex
   [   16.898463] tg3 :04:00.0: eth0: Flow control is off for TX and off 
for RX
   [   16.898804] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  Date: Sat Nov 10 22:27:50 2012
  InstallationDate: Installed on 2012-11-09 (1 days ago)
  InstallationMedia: Ubuntu-Studio 12.10 "Quantal Quetzal" - Release amd64 
(20121017.1)
  MarkForUpload: True
  PackageArchi

[Desktop-packages] [Bug 1072162] Re: [AO722, Conexant CX20588, Pink Mic, Left] No sound at all

[Raymond]

do you mean the problem is still not fixed ?


http://git.kernel.org/?p=linux/kernel/git/tiwai/sound.git;a=commitdiff;h=74d3e69728a0dcee8cd0f93da4dc077431d59606;hp=d4f1e48bd11e3df6a26811f7a1f06c4225d92f7d

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to alsa-driver in Ubuntu.
https://bugs.launchpad.net/bugs/1072162

Title:
  [AO722, Conexant CX20588, Pink Mic, Left] No sound at all

Status in “alsa-driver” package in Ubuntu:
  Confirmed

Bug description:
  The mic doesn't work.

  ProblemType: Bug
  DistroRelease: Ubuntu 12.10
  Package: alsa-base 1.0.25+dfsg-0ubuntu3
  ProcVersionSignature: Ubuntu 3.5.0-17.28-generic 3.5.5
  Uname: Linux 3.5.0-17-generic i686
  ApportVersion: 2.6.1-0ubuntu3
  Architecture: i386
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC1:  anderson   1951 F pulseaudio
   /dev/snd/controlC0:  anderson   1951 F pulseaudio
  Date: Sat Oct 27 16:05:56 2012
  InstallationMedia: Ubuntu 12.10 "Quantal Quetzal" - Release i386 (20121017.2)
  PackageArchitecture: all
  SourcePackage: alsa-driver
  Symptom: audio
  Symptom_AlsaRecordingTest: ALSA recording test through plughw:SB failed
  Symptom_Card: Áudio interno - HDA ATI SB
  Symptom_DevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC1:  anderson   1951 F pulseaudio
   /dev/snd/controlC0:  anderson   1951 F pulseaudio
  Symptom_Jack: Pink Mic, Left
  Symptom_Type: No sound at all
  Title: [AO722, Conexant CX20588, Pink Mic, Left] No sound at all
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 06/08/2011
  dmi.bios.vendor: Acer
  dmi.bios.version: V1.04
  dmi.board.asset.tag: Base Board Asset Tag
  dmi.board.name: JE10-BZ
  dmi.board.vendor: Acer
  dmi.board.version: Base Board Version
  dmi.chassis.type: 10
  dmi.chassis.vendor: Acer
  dmi.chassis.version: V1.04
  dmi.modalias: 
dmi:bvnAcer:bvrV1.04:bd06/08/2011:svnAcer:pnAO722:pvrV1.04:rvnAcer:rnJE10-BZ:rvrBaseBoardVersion:cvnAcer:ct10:cvrV1.04:
  dmi.product.name: AO722
  dmi.product.version: V1.04
  dmi.sys.vendor: Acer

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1072162/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 882734] Re: [USB-Audio - C-Media USB Headphone Set, playback] volume slider problem/ No sound on this and lower volume levels

[Raymond]

post the output of alsa-info.sh

"lsusb -" of your usb audio device

and the pulseaudio verbose log when you reduce the volume

https://wiki.ubuntu.com/PulseAudio/Log

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to alsa-driver in Ubuntu.
https://bugs.launchpad.net/bugs/882734

Title:
  [USB-Audio - C-Media USB Headphone Set, playback] volume slider
  problem/ No sound on this and lower volume levels

Status in “alsa-driver” package in Ubuntu:
  Confirmed

Bug description:
  There is no Sound if I set the volume to a level lower than
  approximatelly 25%. If i set it higher than 25% it is already very
  very loud.

  ProblemType: Bug
  DistroRelease: Ubuntu 11.10
  Package: alsa-base 1.0.24+dfsg-0ubuntu2
  ProcVersionSignature: Ubuntu 3.0.0-12.20-generic 3.0.4
  Uname: Linux 3.0.0-12-generic x86_64
  NonfreeKernelModules: nvidia
  AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24.
  ApportVersion: 1.23-0ubuntu3
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC1:  raphael2545 F pulseaudio
   /dev/snd/controlC2:  raphael2545 F pulseaudio
   /dev/snd/pcmC2D0p:   raphael2545 F...m pulseaudio
   /dev/snd/controlC0:  raphael2545 F pulseaudio
  Card0.Amixer.info:
   Card hw:0 'Intel'/'HDA Intel at 0xfcff8000 irq 46'
 Mixer name : 'VIA VT1708S'
 Components : 'HDA:11060397,1043837a,0010'
 Controls  : 37
 Simple ctrls  : 21
  Card1.Amixer.info:
   Card hw:1 'NVidia'/'HDA NVidia at 0xfe9fc000 irq 17'
 Mixer name : 'Nvidia GPU 14 HDMI/DP'
 Components : 'HDA:10de0014,10de0101,00100100'
 Controls  : 16
 Simple ctrls  : 4
  Card2.Amixer.info:
   Card hw:2 'Set'/'C-Media USB Headphone Set at usb-:00:1a.1-2, full speed'
 Mixer name : 'USB Mixer'
 Components : 'USB0d8c:000c'
 Controls  : 7
 Simple ctrls  : 3
  Date: Thu Oct 27 20:54:43 2011
  InstallationMedia: Ubuntu 10.04 LTS "Lucid Lynx" - Release amd64 (20100429)
  PackageArchitecture: all
  ProcEnviron:
   LANGUAGE=en_GB:en
   PATH=(custom, no user)
   LANG=de_DE.UTF-8
   SHELL=/bin/bash
  SourcePackage: alsa-driver
  Symptom: audio
  Symptom_Card: Audio Adapter - C-Media USB Headphone Set
  Symptom_Type: Volume slider, or mixer problems
  Title: [USB-Audio - C-Media USB Headphone Set, playback] volume slider problem
  UpgradeStatus: Upgraded to oneiric on 2011-10-14 (12 days ago)
  dmi.bios.date: 03/31/2010
  dmi.bios.vendor: American Megatrends Inc.
  dmi.bios.version: 0801
  dmi.board.asset.tag: To Be Filled By O.E.M.
  dmi.board.name: P5Q SE2
  dmi.board.vendor: ASUSTeK Computer INC.
  dmi.board.version: Rev X.0x
  dmi.chassis.asset.tag: Asset-1234567890
  dmi.chassis.type: 3
  dmi.chassis.vendor: Chassis Manufacture
  dmi.chassis.version: Chassis Version
  dmi.modalias: 
dmi:bvnAmericanMegatrendsInc.:bvr0801:bd03/31/2010:svnSystemmanufacturer:pnSystemProductName:pvrSystemVersion:rvnASUSTeKComputerINC.:rnP5QSE2:rvrRevX.0x:cvnChassisManufacture:ct3:cvrChassisVersion:
  dmi.product.name: System Product Name
  dmi.product.version: System Version
  dmi.sys.vendor: System manufacturer

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/882734/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1072129] Re: evince crashes after opening certain PDF file

[Matthieu Baerts]

It seems this bug is due to Poppler:
https://bugs.freedesktop.org/show_bug.cgi?id=56463

And this patch should fix this bug:
http://cgit.freedesktop.org/poppler/poppler/commit/?id=ae8fc0cbfc6123189e17b3cf1286e0540f181646

Is it possible to confirm that this new patched version available on my 
ppa:matttbe/ppa fixes this bug? :)
  * Ubuntu Raring 13.04: 
https://launchpad.net/~matttbe/+archive/ppa/+sourcepub/2781218/+listing-archive-extra
  * Ubuntu Quantal 12.10: 
https://launchpad.net/~matttbe/+archive/ppa/+sourcepub/2781220/+listing-archive-extra

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to evince in Ubuntu.
https://bugs.launchpad.net/bugs/1072129

Title:
  evince crashes after opening certain PDF file

Status in Evince document viewer:
  Unknown
Status in Poppler:
  Unknown
Status in “evince” package in Ubuntu:
  Confirmed
Status in “poppler” package in Ubuntu:
  New

Bug description:
  evince crashes after opening the attached PDF file.

  This is printed on the console:

  evince:2460): Gdk-CRITICAL **: gdk_error_trap_pop_internal: assertion `trap 
!= NULL' failed
  failed to look up ��
  failed to look up ��
  failed to look up ��
  failed to look up ��
  failed to look up ��
  failed to look up ��
  failed to look up ��
  failed to look up ��
  failed to look up ��
  failed to look up ��
  failed to look up ��
  failed to look up ��
  evince: GfxState.cc:4159: void GfxGouraudTriangleShading::getTriangle(int, 
double*, double*, GfxColor*, double*, double*, GfxColor*, double*, double*, 
GfxColor*): Zusicherung »!isParameterized()« nicht erfüllt.
  Abgebrochen

To manage notifications about this bug go to:
https://bugs.launchpad.net/evince/+bug/1072129/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1074667] Re: Cairo crashes when loading some svg or pdf files

[Matthieu Baerts]

** Description changed:

+ [ Impact ]
+ 
+ Some apps (which use Cairo) crash when loadgin some svg[1] or pdf[2]
+ files.
+ 
+ [ Test case ]
+ 
+  * Open this file with Evince: 
http://kernsec.org/files/LinuxSecuritySummit2012_rpm.pdf
+  * Open the svg file[1] with this little program compiled with:
+   $ gcc -ggdb test.c -o test `pkg-config --libs --cflags gtk+-3.0`
+ Then, launch it from the same dir of the 'geany.svg' file[1]
+ 
+ ===
+ 
+ #include 
+ #include 
+ 
+ int main (int argc, char **argv)
+ {
+  gtk_init (&argc, &argv);
+  GdkPixbuf *pixbuf = gdk_pixbuf_new_from_file_at_size ("geany.svg", 64, 64, 
NULL);
+  return 0;
+ }
+ 
+ ===
+ 
+ [ Regression Potential ]
+ 
+  * The new proposed version contains a patch from Git upstream repository. It 
is also available in the 1.12.4 version. According to Cairo devs, it should 
have any regression:
+   - 
http://cgit.freedesktop.org/cairo/commit/?id=797441093a8346003552e0cf89aef2a644ff53ab
+   - https://bugs.freedesktop.org/show_bug.cgi?id=54822
+   - https://bugs.freedesktop.org/show_bug.cgi?id=56698 (a duplicated bug)
+ 
+ [ Other Info ]
+ 
+  * This BZR branch should fix this bug: 
lp:~matttbe/ubuntu/quantal/cairo/lp1074667
+  * You can easily test the new version by using these packages on Quantal: 
https://launchpad.net/~matttbe/+archive/experimental-debian-build/+sourcepub/2781148/+listing-archive-extra
+  * Or on Ubuntu Raring: 
https://launchpad.net/~matttbe/+archive/ppa/+sourcepub/2767939/+listing-archive-extra
+ 
+ 
+ [ Original bug report ]
+ 
  Hello,
  
  Cairo (libcairo2 1.12.2-2ubuntu1) crashes when loading some svg[1] or pdf[2] 
files.
  This bug has already been reported to Cairo devs:
    * https://bugs.freedesktop.org/show_bug.cgi?id=54822
    * https://bugs.freedesktop.org/show_bug.cgi?id=56698 (a duplicated bug)
  
  And it's already fixed in the bug-fix version 1.12.4 thanks to this commit by 
Chris Wilson:
    * 
http://cgit.freedesktop.org/cairo/commit/?id=797441093a8346003552e0cf89aef2a644ff53ab
  
  How to reproduce this crash:
   1] Open this file with Evince: 
http://kernsec.org/files/LinuxSecuritySummit2012_rpm.pdf
  
   2] Open the svg file[1] with this little program compiled with:
    $ gcc -ggdb test.c -o test `pkg-config --libs --cflags gtk+-3.0`
  Then, launch it from the same dir of the 'geany.svg' file[1]
  
  ===
  
  #include 
  #include 
  
  int main (int argc, char **argv)
  {
   gtk_init (&argc, &argv);
   GdkPixbuf *pixbuf = gdk_pixbuf_new_from_file_at_size ("geany.svg", 64, 64, 
NULL);
   return 0;
  }
  
  ===
  
  A bzr branch will be linked to this bug report: 
lp:~matttbe/ubuntu/raring/cairo/1074667
  This new version should fix this bug.
  
- 
  How to easily test the new version:
-  You can use the new version of this package available in my ppa:matttbe/ppa
-  
https://launchpad.net/~matttbe/+archive/ppa/+sourcepub/2767939/+listing-archive-extra
- 
+  You can use the new version of this package available in my ppa:matttbe/ppa
+  
https://launchpad.net/~matttbe/+archive/ppa/+sourcepub/2767939/+listing-archive-extra
  
  Is it possible to upload this new package to Raring repos?
  And is it also possible to backport this change to Quantal-update repos?
- 
  
  Thank you for your help! :)
  
  [1] The svg file joined to this bug report: 
https://bugs.launchpad.net/ubuntu/+source/cairo/+bug/1074667/+attachment/3422628/+files/geany.svg
  [2] http://kernsec.org/files/LinuxSecuritySummit2012_rpm.pdf

** Summary changed:

- Cairo crashes when loading some svg or pdf files
+ SRU: Cairo crashes when loading some svg or pdf files

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to cairo in Ubuntu.
https://bugs.launchpad.net/bugs/1074667

Title:
  SRU: Cairo crashes when loading some svg or pdf files

Status in libcairo  -  cairo vector graphics library:
  Fix Released
Status in “cairo” package in Ubuntu:
  Fix Committed

Bug description:
  [ Impact ]

  Some apps (which use Cairo) crash when loadgin some svg[1] or pdf[2]
  files.

  [ Test case ]

   * Open this file with Evince: 
http://kernsec.org/files/LinuxSecuritySummit2012_rpm.pdf
   * Open the svg file[1] with this little program compiled with:
$ gcc -ggdb test.c -o test `pkg-config --libs --cflags gtk+-3.0`
  Then, launch it from the same dir of the 'geany.svg' file[1]

  ===

  #include 
  #include 

  int main (int argc, char **argv)
  {
   gtk_init (&argc, &argv);
   GdkPixbuf *pixbuf = gdk_pixbuf_new_from_file_at_size ("geany.svg", 64, 64, 
NULL);
   return 0;
  }

  ===

  [ Regression Potential ]

   * The new proposed version contains a patch from Git upstream repository. It 
is also available in the 1.12.4 version. According to Cairo devs, it should 
have any regression:
- 
http://cgit.freedesktop.org/cairo/commit/?id=797441093a8346003552e0cf89aef2a644ff53ab
- https://bugs.freedesktop.org/show_bug.cgi?id=54822
- https://bugs.freede

[Desktop-packages] [Bug 1007575] Re: SB Arena USB headset causes X BUG, can't click outside window

[Carlos Gomes]

I have the same issue with a Creative HS-950 headset, should I report a
new bug?

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xorg-server in Ubuntu.
https://bugs.launchpad.net/bugs/1007575

Title:
  SB Arena USB headset causes X BUG, can't click outside window

Status in “xorg-server” package in Ubuntu:
  In Progress
Status in “xorg-server” source package in Precise:
  In Progress
Status in “xorg-server” source package in Quantal:
  In Progress

Bug description:
  When I plug my SB Arena USB headset in, I can't click the mouse in any
  window besides the one with focus. The current window works ok, but
  any other doesn't register the click. Also, I get a BUG in the X logs.

  This on Precise, xserver-xorg-input-evdev  version 1:2.7.0-0ubuntu1

  /var/log/Xorg.0.log:
  on device insert:
  [252903.181] (II) config/udev: Adding input device Creative Technology SB 
Arena Headset (/dev/input/event9)
  [252903.181] (**) Creative Technology SB Arena Headset: Applying InputClass 
"evdev keyboard catchall"
  [252903.181] (II) Using input driver 'evdev' for 'Creative Technology SB 
Arena Headset'
  [252903.181] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
  [252903.181] (**) Creative Technology SB Arena Headset: always reports core 
events
  [252903.181] (**) evdev: Creative Technology SB Arena Headset: Device: 
"/dev/input/event9"
  [252903.181] (--) evdev: Creative Technology SB Arena Headset: Vendor 0x41e 
Product 0x403
  [252903.181] (--) evdev: Creative Technology SB Arena Headset: Found 8 mouse 
buttons
  [252903.181] (--) evdev: Creative Technology SB Arena Headset: Found keys
  [252903.181] (II) evdev: Creative Technology SB Arena Headset: Configuring as 
mouse
  [252903.181] (II) evdev: Creative Technology SB Arena Headset: Configuring as 
keyboard
  [252903.181] (**) evdev: Creative Technology SB Arena Headset: YAxisMapping: 
buttons 4 and 5
  [252903.181] (**) evdev: Creative Technology SB Arena Headset: 
EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
  [252903.181] (**) Option "config_info" 
"udev:/sys/devices/pci:00/:00:1a.1/usb4/4-1/4-1:1.3/input/input18/event9"
  [252903.181] (II) XINPUT: Adding extended input device "Creative Technology 
SB Arena Headset" (type: KEYBOARD, id 15)
  [252903.181] (**) Option "xkb_rules" "evdev"
  [252903.181] (**) Option "xkb_model" "pc105"
  [252903.181] (**) Option "xkb_layout" "us"
  [252903.191] BUG: triggered 'if (!dev->valuator || dev->valuator->numAxes < 
2)'
  BUG: ../../dix/getevents.c:850 in scale_to_desktop()
  [252903.191] 
  Backtrace:
  [252903.192] 0: /usr/bin/X (xorg_backtrace+0x26) [0x7f148e6f3866]
  [252903.192] 1: /usr/bin/X (0x7f148e56b000+0x621fe) [0x7f148e5cd1fe]
  [252903.192] 2: /usr/bin/X (0x7f148e56b000+0x62e6d) [0x7f148e5cde6d]
  [252903.192] 3: /usr/bin/X (GetPointerEvents+0xe2) [0x7f148e5cf202]
  [252903.192] 4: /usr/bin/X (QueuePointerEvents+0x1d) [0x7f148e5cf65d]
  [252903.192] 5: /usr/bin/X (xf86PostButtonEvent+0xdd) [0x7f148e60b5ed]
  [252903.192] 6: /usr/lib/xorg/modules/input/evdev_drv.so 
(0x7f1486989000+0x5f48) [0x7f148698ef48]
  [252903.192] 7: /usr/bin/X (0x7f148e56b000+0x8ae07) [0x7f148e5f5e07]
  [252903.192] 8: /usr/bin/X (0x7f148e56b000+0xb0d4a) [0x7f148e61bd4a]
  [252903.192] 9: /lib/x86_64-linux-gnu/libpthread.so.0 (0x7f148d891000+0xfcb0) 
[0x7f148d8a0cb0]
  [252903.192] 10: /lib/x86_64-linux-gnu/libc.so.6 (__select+0x13) 
[0x7f148c7f0803]
  [252903.192] 11: /usr/bin/X (WaitForSomething+0x19b) [0x7f148e6f0c4b]
  [252903.192] 12: /usr/bin/X (0x7f148e56b000+0x4e4f2) [0x7f148e5b94f2]
  [252903.192] 13: /usr/bin/X (0x7f148e56b000+0x3d6aa) [0x7f148e5a86aa]
  [252903.192] 14: /lib/x86_64-linux-gnu/libc.so.6 (__libc_start_main+0xed) 
[0x7f148c72676d]
  [252903.192] 15: /usr/bin/X (0x7f148e56b000+0x3d99d) [0x7f148e5a899d]

  on removal:
  [252937.048] BUG: triggered 'if (!dev->valuator || dev->valuator->numAxes < 
2)'
  BUG: ../../dix/getevents.c:850 in scale_to_desktop()
  [252937.048] 
  Backtrace:
  [252937.048] 0: /usr/bin/X (xorg_backtrace+0x26) [0x7f148e6f3866]
  [252937.048] 1: /usr/bin/X (0x7f148e56b000+0x621fe) [0x7f148e5cd1fe]
  [252937.048] 2: /usr/bin/X (0x7f148e56b000+0x62e6d) [0x7f148e5cde6d]
  [252937.048] 3: /usr/bin/X (GetPointerEvents+0xe2) [0x7f148e5cf202]
  [252937.048] 4: /usr/bin/X (QueuePointerEvents+0x1d) [0x7f148e5cf65d]
  [252937.048] 5: /usr/bin/X (xf86PostButtonEvent+0xdd) [0x7f148e60b5ed]
  [252937.048] 6: /usr/lib/xorg/modules/input/evdev_drv.so 
(0x7f1486989000+0x5f48) [0x7f148698ef48]
  [252937.048] 7: /usr/bin/X (0x7f148e56b000+0x8ae07) [0x7f148e5f5e07]
  [252937.048] 8: /usr/bin/X (0x7f148e56b000+0xb0d4a) [0x7f148e61bd4a]
  [252937.048] 9: /lib/x86_64-linux-gnu/libpthread.so.0 (0x7f148d891000+0xfcb0) 
[0x7f148d8a0cb0]
  [252937.048] 10: /lib/x86_64-linux-gnu/libc.so.6 (__select+0x13) 
[0x7f148c7f0803]
  [252937.048] 11: /usr/bin/X (WaitForSomething+0x19b) [0x7f148e6f0c4b]
  [252937.049] 12: /usr

[Desktop-packages] [Bug 1077471] Re: after restart NM service we have doubled entries

[Marius Kotsbak]

Please run "apport-collect 1077471" in a terminal.

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to network-manager in Ubuntu.
https://bugs.launchpad.net/bugs/1077471

Title:
  after restart NM service we have doubled entries

Status in “gnome-shell-extensions-netmonitor” package in Ubuntu:
  Invalid
Status in “knetworkmanager” package in Ubuntu:
  Incomplete
Status in “network-manager” package in Ubuntu:
  Incomplete

Bug description:
  Im using raring but this problem also exists in quantal, when
  restarting network-manager service, when clicking in NM plasma icon
  shows wifi network entries two times.

  If i restart NM service again, then it shows wifi network entries one
  time like it should, however when pointing the mouse over the NM icon
  in plasma panel continues showing doubled entries.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/gnome-shell-extensions-netmonitor/+bug/1077471/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1077376] Re: Evince crashes when using the latest version of libgeis1

[Matthieu Baerts]

** Changed in: geis (Ubuntu)
   Importance: Undecided => High

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to evince in Ubuntu.
https://bugs.launchpad.net/bugs/1077376

Title:
  Evince crashes when using the latest version of libgeis1

Status in “evince” package in Ubuntu:
  Confirmed
Status in “geis” package in Ubuntu:
  Confirmed

Bug description:
  Hello,

  With the new version of libgeis1, evince crashes.
  I'll add a backtrace (made without debugging symbols but Evince crashes each 
time)

  ProblemType: Bug
  DistroRelease: Ubuntu 13.04
  Package: evince 3.6.0-0ubuntu2
  ProcVersionSignature: Ubuntu 3.5.0-17.28-generic 3.5.5
  Uname: Linux 3.5.0-17-generic x86_64
  ApportVersion: 2.6.2-0ubuntu3
  Architecture: amd64
  Date: Sat Nov 10 16:04:55 2012
  InstallationDate: Installed on 2011-08-10 (457 days ago)
  InstallationMedia: Ubuntu 11.10 "Oneiric Ocelot" - Alpha amd64 (20110803.1)
  MarkForUpload: True
  SourcePackage: evince
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/evince/+bug/1077376/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1077471] Re: after restart NM service we have doubled entries

[Marius Kotsbak]

Oh, this is in KDE, right?

** Also affects: kubuntu-meta (Ubuntu)
   Importance: Undecided
   Status: New

** Changed in: gnome-shell-extensions-netmonitor (Ubuntu)
   Status: New => Invalid

** Also affects: knetworkmanager (Ubuntu)
   Importance: Undecided
   Status: New

** No longer affects: kubuntu-meta (Ubuntu)

** Changed in: knetworkmanager (Ubuntu)
   Status: New => Incomplete

** Changed in: network-manager (Ubuntu)
   Status: New => Incomplete

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to network-manager in Ubuntu.
https://bugs.launchpad.net/bugs/1077471

Title:
  after restart NM service we have doubled entries

Status in “gnome-shell-extensions-netmonitor” package in Ubuntu:
  Invalid
Status in “knetworkmanager” package in Ubuntu:
  Incomplete
Status in “network-manager” package in Ubuntu:
  Incomplete

Bug description:
  Im using raring but this problem also exists in quantal, when
  restarting network-manager service, when clicking in NM plasma icon
  shows wifi network entries two times.

  If i restart NM service again, then it shows wifi network entries one
  time like it should, however when pointing the mouse over the NM icon
  in plasma panel continues showing doubled entries.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/gnome-shell-extensions-netmonitor/+bug/1077471/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 628710] Re: Brasero burns DVD-R very slow

[alfredo]

Report that it still happens with 12.04.

Burn speed starts off at 3., then rapidly drops to 0.8x.

PC is Toshiba Satellite Pro
> uname -a
Linux blackbox 3.2.0-32-generic-pae #51-Ubuntu SMP Wed Sep 26 21:54:23 UTC 2012 
i686 i686 i386 GNU/Linux

> lscpu 
Architecture:  i686
CPU op-mode(s):32-bit, 64-bit
Byte Order:Little Endian
CPU(s):4
On-line CPU(s) list:   0-3
Thread(s) per core:2
Core(s) per socket:2
Socket(s): 1
Vendor ID: GenuineIntel
CPU family:6
Model: 42
Stepping:  7
CPU MHz:   2300.000
BogoMIPS:  4589.55
Virtualisation:VT-x
L1d cache: 32K
L1i cache: 32K
L2 cache:  256K
L3 cache:  3072K

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to brasero in Ubuntu.
https://bugs.launchpad.net/bugs/628710

Title:
  Brasero burns DVD-R very slow

Status in “brasero” package in Ubuntu:
  Confirmed

Bug description:
  Binary package hint: brasero

  Brasero in Lucid Lynx burns very slow. The DVD is Optiarc AD-7191S
  SATA drive and supports 16x writing. The inserted medium is Verbatim
  DVD-R that also supports 16x speed. The data is written only at
  2.5/2.6x speed average, sometimes it also jumps between 3.0x and 2.0x.
  The data is correctly written (verified with md5 sums).

  My other specs are Dual Core Athlon X2 4850e, 2 GB RAM and 160GB sata
  HDD.

  ProblemType: Bug
  DistroRelease: Ubuntu 10.04
  Package: brasero 2.30.2-0ubuntu1
  ProcVersionSignature: Ubuntu 2.6.32-24.41-generic 2.6.32.15+drm33.5
  Uname: Linux 2.6.32-24-generic i686
  NonfreeKernelModules: fglrx
  Architecture: i386
  Date: Thu Sep  2 11:02:32 2010
  ProcEnviron:
   LANG=sl_SI.utf8
   SHELL=/bin/bash
  SourcePackage: brasero

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/brasero/+bug/628710/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1077495] [NEW] package gvfs-backends 1.12.1-0ubuntu1.1 failed to install/upgrade: subprocesso dpkg-deb --fsys-tarfile retornou erro do status de saída 2

[Pedro António Soares]

Public bug reported:

!

ProblemType: Package
DistroRelease: Ubuntu 12.10
Package: gvfs-backends 1.12.1-0ubuntu1.1
ProcVersionSignature: Ubuntu 3.5.0-18.29-generic 3.5.7
Uname: Linux 3.5.0-18-generic x86_64
ApportVersion: 2.6.1-0ubuntu6
AptOrdering:
 gvfs-backends: Install
 gvfs-backends: Configure
Architecture: amd64
Date: Sat Nov 10 21:57:17 2012
ErrorMessage: subprocesso dpkg-deb --fsys-tarfile retornou erro do status de 
saída 2
InstallationDate: Installed on 2012-09-03 (67 days ago)
InstallationMedia: Ubuntu 12.04 LTS "Precise Pangolin" - Release amd64 
(20120425)
MarkForUpload: True
SourcePackage: gvfs
Title: package gvfs-backends 1.12.1-0ubuntu1.1 failed to install/upgrade: 
subprocesso dpkg-deb --fsys-tarfile retornou erro do status de saída 2
UpgradeStatus: Upgraded to quantal on 2012-11-10 (0 days ago)

** Affects: gvfs (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: amd64 apport-package quantal

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to gvfs in Ubuntu.
https://bugs.launchpad.net/bugs/1077495

Title:
  package gvfs-backends 1.12.1-0ubuntu1.1 failed to install/upgrade:
  subprocesso dpkg-deb --fsys-tarfile retornou erro do status de saída 2

Status in “gvfs” package in Ubuntu:
  New

Bug description:
  !

  ProblemType: Package
  DistroRelease: Ubuntu 12.10
  Package: gvfs-backends 1.12.1-0ubuntu1.1
  ProcVersionSignature: Ubuntu 3.5.0-18.29-generic 3.5.7
  Uname: Linux 3.5.0-18-generic x86_64
  ApportVersion: 2.6.1-0ubuntu6
  AptOrdering:
   gvfs-backends: Install
   gvfs-backends: Configure
  Architecture: amd64
  Date: Sat Nov 10 21:57:17 2012
  ErrorMessage: subprocesso dpkg-deb --fsys-tarfile retornou erro do status de 
saída 2
  InstallationDate: Installed on 2012-09-03 (67 days ago)
  InstallationMedia: Ubuntu 12.04 LTS "Precise Pangolin" - Release amd64 
(20120425)
  MarkForUpload: True
  SourcePackage: gvfs
  Title: package gvfs-backends 1.12.1-0ubuntu1.1 failed to install/upgrade: 
subprocesso dpkg-deb --fsys-tarfile retornou erro do status de saída 2
  UpgradeStatus: Upgraded to quantal on 2012-11-10 (0 days ago)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/gvfs/+bug/1077495/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1077496] [NEW] package gvfs-backends 1.12.1-0ubuntu1.1 failed to install/upgrade: subprocesso dpkg-deb --fsys-tarfile retornou erro do status de saída 2

[Pedro António Soares]

Public bug reported:

!

ProblemType: Package
DistroRelease: Ubuntu 12.10
Package: gvfs-backends 1.12.1-0ubuntu1.1
ProcVersionSignature: Ubuntu 3.5.0-18.29-generic 3.5.7
Uname: Linux 3.5.0-18-generic x86_64
ApportVersion: 2.6.1-0ubuntu6
AptOrdering:
 gvfs-backends: Install
 gvfs-backends: Configure
Architecture: amd64
Date: Sat Nov 10 21:57:17 2012
ErrorMessage: subprocesso dpkg-deb --fsys-tarfile retornou erro do status de 
saída 2
InstallationDate: Installed on 2012-09-03 (67 days ago)
InstallationMedia: Ubuntu 12.04 LTS "Precise Pangolin" - Release amd64 
(20120425)
MarkForUpload: True
SourcePackage: gvfs
Title: package gvfs-backends 1.12.1-0ubuntu1.1 failed to install/upgrade: 
subprocesso dpkg-deb --fsys-tarfile retornou erro do status de saída 2
UpgradeStatus: Upgraded to quantal on 2012-11-10 (0 days ago)

** Affects: gvfs (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: amd64 apport-package quantal

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to gvfs in Ubuntu.
https://bugs.launchpad.net/bugs/1077496

Title:
  package gvfs-backends 1.12.1-0ubuntu1.1 failed to install/upgrade:
  subprocesso dpkg-deb --fsys-tarfile retornou erro do status de saída 2

Status in “gvfs” package in Ubuntu:
  New

Bug description:
  !

  ProblemType: Package
  DistroRelease: Ubuntu 12.10
  Package: gvfs-backends 1.12.1-0ubuntu1.1
  ProcVersionSignature: Ubuntu 3.5.0-18.29-generic 3.5.7
  Uname: Linux 3.5.0-18-generic x86_64
  ApportVersion: 2.6.1-0ubuntu6
  AptOrdering:
   gvfs-backends: Install
   gvfs-backends: Configure
  Architecture: amd64
  Date: Sat Nov 10 21:57:17 2012
  ErrorMessage: subprocesso dpkg-deb --fsys-tarfile retornou erro do status de 
saída 2
  InstallationDate: Installed on 2012-09-03 (67 days ago)
  InstallationMedia: Ubuntu 12.04 LTS "Precise Pangolin" - Release amd64 
(20120425)
  MarkForUpload: True
  SourcePackage: gvfs
  Title: package gvfs-backends 1.12.1-0ubuntu1.1 failed to install/upgrade: 
subprocesso dpkg-deb --fsys-tarfile retornou erro do status de saída 2
  UpgradeStatus: Upgraded to quantal on 2012-11-10 (0 days ago)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/gvfs/+bug/1077496/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1077471] Re: after restart NM service we have doubled entries

[Marius Kotsbak]

** Also affects: gnome-shell-extensions-netmonitor (Ubuntu)
   Importance: Undecided
   Status: New

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to network-manager in Ubuntu.
https://bugs.launchpad.net/bugs/1077471

Title:
  after restart NM service we have doubled entries

Status in “gnome-shell-extensions-netmonitor” package in Ubuntu:
  New
Status in “network-manager” package in Ubuntu:
  New

Bug description:
  Im using raring but this problem also exists in quantal, when
  restarting network-manager service, when clicking in NM plasma icon
  shows wifi network entries two times.

  If i restart NM service again, then it shows wifi network entries one
  time like it should, however when pointing the mouse over the NM icon
  in plasma panel continues showing doubled entries.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/gnome-shell-extensions-netmonitor/+bug/1077471/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1077490] [NEW] Input method in Skype on amd64 after 12.04 breaks

[Hiroshi Miura]

Public bug reported:

Skype 4.0.0.8 is  32bit qt application.
Input method should be done with qt-immodule, ibus-qt and arbitrary ibus input 
method engine.

It works well with 32bit(i386) environment but there is a issue in
64bit, amd64 environment.

ibus-qt4 is not multi-arch supported. There cannot co-exist libibus-qt1 :amd64, 
i386. so I cannot install libibus-qt1:i386.
It make Skype cannot connect with ibus input method engine in amd64 environment.

In 12.04, dependent icu48 also don't support multi-arch, but it support
m-a in 12.10.


An attachment is a patch for ibut-qt4 to suport m-a and co-installable 
i386/amd64 libraries.

I can use input-method in Skype 4.0.0.8 on amd64 environment with this
patch and libicu48:i386/amd64  from 12.10.

** Affects: ibus-qt (Ubuntu)
 Importance: Undecided
 Status: New

** Patch added: "m-a support of ibus-qt4"
   
https://bugs.launchpad.net/bugs/1077490/+attachment/3429922/+files/ibus-qt-multiarch-2.patch

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to ibus-qt in Ubuntu.
https://bugs.launchpad.net/bugs/1077490

Title:
  Input method in Skype on amd64 after 12.04 breaks

Status in “ibus-qt” package in Ubuntu:
  New

Bug description:
  Skype 4.0.0.8 is  32bit qt application.
  Input method should be done with qt-immodule, ibus-qt and arbitrary ibus 
input method engine.

  It works well with 32bit(i386) environment but there is a issue in
  64bit, amd64 environment.

  ibus-qt4 is not multi-arch supported. There cannot co-exist libibus-qt1 
:amd64, i386. so I cannot install libibus-qt1:i386.
  It make Skype cannot connect with ibus input method engine in amd64 
environment.

  In 12.04, dependent icu48 also don't support multi-arch, but it
  support m-a in 12.10.

  
  An attachment is a patch for ibut-qt4 to suport m-a and co-installable 
i386/amd64 libraries.

  I can use input-method in Skype 4.0.0.8 on amd64 environment with this
  patch and libicu48:i386/amd64  from 12.10.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/ibus-qt/+bug/1077490/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1077491] [NEW] btcflash.8: "\" instead of "\\" in the manual

[Bjarnig Ingi Gislason]

Public bug reported:

Software: dvd+rw-tools
Version: 7.1-6
File: btcflash.8
Patch: Yes

  Warnings from "GROFF_ENCODING=utf8 groff -b -ww -mandoc -z ..."

:17: warning: escape character ignored before `T'
:17: warning: escape character ignored before `T'


#
  Output from "nroff" should (usually) have only the left margin
adjusted (".ad l").  Otherwise the space between words can be too long.

  Output for a manual should (usually) have the right margin ragged
(".ad l"), as it is not (usually) intended for a book or other
professional printing medium.

#
  Each sentence should begin in a new line.

a) The space between sentences is different between formatters.

b) Changes in one line do then not affect others, and do therefore not
appear as changed in the output of "diff".

#
  Sometimes a small change in space between a roman and an italic
character is needed (use ".RI" or ".IR" macros).

#
  Remove spaces at end of lines.

#
  Protect the last full stop (period) in abbreviations or ellipses
(with \&) if it is not at the end of a sentence.

#
  Protect the full stop (period) at the beginning of text (word) or
ellipsis.

#
  Protect a single quote (', apostrophe) (with \&) at the start of the
quoted text.

##

ProblemType: Bug
Architecture: amd64
Date: Sat Nov 10 21:42:48 2012
Dependencies:  
 coreutils 7.4-2ubuntu3
 debconf 1.5.28ubuntu4
 debconf-i18n 1.5.28ubuntu4
 dpkg 1.15.5.6ubuntu4.6
 findutils 4.4.2-1ubuntu1
 gcc-4.4-base 4.4.3-4ubuntu5.1
 genisoimage 9:1.1.10-1ubuntu1
 libacl1 2.2.49-2
 libattr1 1:2.4.44-1
 libbz2-1.0 1.0.5-4ubuntu0.2
 libc-bin 2.11.1-0ubuntu7.11
 libc6 2.11.1-0ubuntu7.11
 libgcc1 1:4.4.3-4ubuntu5.1
 liblocale-gettext-perl 1.05-6
 libmagic1 5.03-5ubuntu1
 libselinux1 2.0.89-4
 libstdc++6 4.4.3-4ubuntu5.1
 libtext-charwidth-perl 0.04-6
 libtext-iconv-perl 1.7-2
 libtext-wrapi18n-perl 0.06-7
 lzma 4.43-14ubuntu2
 perl-base 5.10.1-8ubuntu2.1
 tzdata 2012e-0ubuntu0.10.04
 zlib1g 1:1.2.3.3.dfsg-15ubuntu1
DistroRelease: Ubuntu 10.04
Package: dvd+rw-tools 7.1-6
PackageArchitecture: amd64
ProcEnviron:
 PATH=(custom, no user)
 LOCPATH=/var/tmp/username/lib/locale
 LANG=is_IS.ISO-8859-1
 SHELL=/bin/csh
ProcVersionSignature: Ubuntu 2.6.35-25.44~lucid1-generic 2.6.35.10
SourcePackage: dvd+rw-tools
Tags: lucid
Uname: Linux 2.6.35-25-generic x86_64
 
 
  Patch is in the attachment

** Affects: dvd+rw-tools (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: manpage patch

** Patch added: "btcflash.8.diff"
   
https://bugs.launchpad.net/bugs/1077491/+attachment/3429923/+files/btcflash.8.diff

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to dvd+rw-tools in Ubuntu.
https://bugs.launchpad.net/bugs/1077491

Title:
  btcflash.8: "\" instead of "\\" in the manual

Status in “dvd+rw-tools” package in Ubuntu:
  New

Bug description:
  Software: dvd+rw-tools
  Version: 7.1-6
  File: btcflash.8
  Patch: Yes

Warnings from "GROFF_ENCODING=utf8 groff -b -ww -mandoc -z ..."

  :17: warning: escape character ignored before `T'
  :17: warning: escape character ignored before `T'

  
  #
Output from "nroff" should (usually) have only the left margin
  adjusted (".ad l").  Otherwise the space between words can be too long.

Output for a manual should (usually) have the right margin ragged
  (".ad l"), as it is not (usually) intended for a book or other
  professional printing medium.

  #
Each sentence should begin in a new line.

  a) The space between sentences is different between formatters.

  b) Changes in one line do then not affect others, and do therefore not
  appear as changed in the output of "diff".

  #
Sometimes a small change in space between a roman and an italic
  character is needed (use ".RI" or ".IR" macros).

  #
Remove spaces at end of lines.

  #
Protect the last full stop (period) in abbreviations or ellipses
  (with \&) if it is not at the end of a sentence.

  #
Protect the full stop (period) at the beginning of text (word) or
  ellipsis.

  #
Protect a single quote (', apostrophe) (with \&) at the start of the
  quoted text.

  ##

  ProblemType: Bug
  Architecture: amd64
  Date: Sat Nov 10 21:42:48 2012
  Dependencies:  
   coreutils 7.4-2ubuntu3
   debconf 1.5.28ubuntu4
   debconf-i18n 1.5.28ubuntu4
   dpkg 1.15.5.6ubuntu4.6
   findutils 4.4.2-1ubuntu1
   gcc-4.4-base 4.4.3-4ubuntu5.1
   genisoimage 9:1.1.10-1ubuntu1
   libacl1 2.2.49-2
   libattr1 1:2.4.44-1
   libbz2-1.0 1.0.5-4ubuntu0.2
   libc-bin 2.11.1-0ubuntu7.11
   libc6 2.11.1-0ubuntu7.11
   libgcc1 1:4.4.3-4ubuntu5.1
   liblocale-gettext-perl 1.05-6
   libmagic1 5.03-5ubuntu1
   libselinux1 2.0.89-4
   libstdc++6 4.4.3-4ubuntu5.1
   libtext-charwidth-perl 0.04-6
   libtext-iconv-perl 1.7-2
   libtext-wrapi18n-perl 0.06-7
   lzma 4.43-14ubuntu2
   perl-base 5.10.1-8ubuntu2.1
   tzdata 2012e-0ubuntu0.10.04
   zlib1g 1:1.2.3.3.dfsg-15ubuntu1
  DistroRelease: Ubuntu 10.04
  Package: dvd+rw-tools 7.1-6
  PackageArchi

Re: [Desktop-packages] [Bug 1076985] Re: Don't work in the menu the list

[impierims]

Thank you for your answer, but I'm not using more Unity because went always in 
crash.
I'm using gnome with the old menu. I'm attaching two photos so you can see the 
problem
in the right side of the screen. Do you see that isn't more the calendar, the 
bottom to 
switch off the computer? The menu for the internet and the account etc...
To switch off I must to use always Ctrl+Alt+Canc or if don't work to shut down 
the power!
Thank you for your attention!


Max 




>
> Da: RaduStoica 
>A: impier...@yahoo.it 
>Inviato: Sabato 10 Novembre 2012 19:10
>Oggetto: [Bug 1076985] Re: Don't work in the menu the list
> 
>Hello,
>
>  This seems like a problem with Unity, the Ubuntu window manager.  Try
>reinstalling it.
>
>To do this:
>
>    - Open a terminal: Dash -> search for terminal -> open Terminal
>    - In the terminal window, run: sudo apt-get install --reinstall 
>ubuntu-desktop
>    - You will be asked for your password.
>
>Restart after that. This will not delete any settings or personal data
>and maybe it will reset the indicator displays.
>
>-- 
>You received this bug notification because you are subscribed to the bug
>report.
>https://bugs.launchpad.net/bugs/1076985
>
>Title:
>  Don't work in the menu the list
>
>Status in “xorg” package in Ubuntu:
>  Incomplete
>
>Bug description:
>  Don't work in the menu the list (in the right) where you can shut down
>  the sistem, where there is the calendar
>
>  ProblemType: Bug
>  DistroRelease: Ubuntu 12.10
>  Package: xorg 1:7.7+1ubuntu4
>  ProcVersionSignature: Ubuntu 3.5.0-18.29-generic 3.5.7
>  Uname: Linux 3.5.0-18-generic x86_64
>  NonfreeKernelModules: fglrx
>  .tmp.unity.support.test.0:
>  
>  ApportVersion: 2.6.1-0ubuntu6
>  Architecture: amd64
>  CompizPlugins: No value set for 
>`/apps/compiz-1/general/screen0/options/active_plugins'
>  CompositorRunning: compiz
>  Date: Fri Nov  9 13:56:39 2012
>  DistUpgraded: 2012-10-22 05:42:32,935 DEBUG enabling apt cron job
>  DistroCodename: quantal
>  DistroVariant: ubuntu
>  DkmsStatus:
>   fglrx, 9.000, 3.2.0-33-generic, x86_64: installed
>   fglrx, 9.000, 3.5.0-18-generic, x86_64: installed
>   virtualbox-guest, 4.1.18, 3.2.0-33-generic, x86_64: installed
>   virtualbox-guest, 4.1.18, 3.5.0-18-generic, x86_64: installed
>  ExtraDebuggingInterest: Yes, if not too technical
>  GraphicsCard:
>   Advanced Micro Devices [AMD] nee ATI Cedar PRO [Radeon HD 5450/6350] 
>[1002:68f9] (prog-if 00 [VGA controller])
>     Subsystem: PC Partner Limited Device [174b:e164]
>  InstallationDate: Installed on 2011-03-19 (601 days ago)
>  InstallationMedia: Ubuntu 10.10 "Maverick Meerkat" - Release amd64 (20101007)
>  JockeyStatus:
>   kmod:fglrx - ATI Fire GL (Proprietary, Enabled, In use)
>   kmod:fglrx_updates - Video driver for the AMD graphics accelerators 
>(Proprietary, Disabled, Not in use)
>  MachineType: Gigabyte Technology Co., Ltd. P67A-UD3
>  MarkForUpload: True
>  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.5.0-18-generic 
>root=UUID=b6137a45-5066-4069-914c-69b27a23c916 ro quiet splash vt.handoff=7
>  SourcePackage: xorg
>  UpgradeStatus: Upgraded to quantal on 2012-10-22 (18 days ago)
>  dmi.bios.date: 10/27/2010
>  dmi.bios.vendor: Award Software International, Inc.
>  dmi.bios.version: F3
>  dmi.board.name: P67A-UD3
>  dmi.board.vendor: Gigabyte Technology Co., Ltd.
>  dmi.board.version: x.x
>  dmi.chassis.type: 3
>  dmi.chassis.vendor: Gigabyte Technology Co., Ltd.
>  dmi.modalias: 
>dmi:bvnAwardSoftwareInternational,Inc.:bvrF3:bd10/27/2010:svnGigabyteTechnologyCo.,Ltd.:pnP67A-UD3:pvr:rvnGigabyteTechnologyCo.,Ltd.:rnP67A-UD3:rvrx.x:cvnGigabyteTechnologyCo.,Ltd.:ct3:cvr:
>  dmi.product.name: P67A-UD3
>  dmi.sys.vendor: Gigabyte Technology Co., Ltd.
>  version.compiz: compiz 1:0.9.8.4+bzr3407-0ubuntu1
>  version.fglrx-installer: fglrx-installer N/A
>  version.ia32-libs: ia32-libs 20090808ubuntu36
>  version.libdrm2: libdrm2 2.4.39-0ubuntu1
>  version.libgl1-mesa-dri: libgl1-mesa-dri 9.0-0ubuntu1
>  version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A
>  version.libgl1-mesa-glx: libgl1-mesa-glx 9.0-0ubuntu1
>  version.xserver-xorg-core: xserver-xorg-core 2:1.13.0-0ubuntu6
>  version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.7.3-0ubuntu2
>  version.xserver-xorg-video-ati: xserver-xorg-video-ati 
>1:6.99.99~git20120913.8637f772-0ubuntu1
>  version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.20.9-0ubuntu2
>  version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 
>1:1.0.2-0ubuntu3
>
>To manage notifications about this bug go to:
>https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1076985/+subscriptions
>
>
>

** Attachment added: "My deskop.png"
   
https://bugs.launchpad.net/bugs/1076985/+attachment/3429893/+files/My%20deskop.png

** Attachment added: "Deskop.png"
   https://bugs.launchpad.net/bugs/1076985/+attachment/3429894/+files/Deskop.png

-- 
You received this bug notification because you are a member of Desktop
Packages, w

[Desktop-packages] [Bug 1040885] Re: gnome-terminal auto-restores its size

[David A Sinck]

... and it's back on later upgrade.  Not sure the circumstances but for
a bit at least it *was* good.

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to gnome-terminal in Ubuntu.
https://bugs.launchpad.net/bugs/1040885

Title:
  gnome-terminal auto-restores its size

Status in “gnome-terminal” package in Ubuntu:
  Confirmed

Bug description:
  Occurs on Quantal

  TEST CASE
  1. Press CTRL+ALT+T to launch a terminal
  2. Press CTRL+SHIFT+T to open a new tab
  3. Make sure the second tab is active and resize the window (Alt+Middle mouse 
button or Windows handles)
  4. Click on the desktop

  ACTUAL RESULT
  Size of the terminal is restored to its initial size. It doesn't occur if the 
window is resized while first tab is active.

  EXPECTED RESULT
  The terminal doesn't autoresize with the user clicks on the desktop

  ProblemType: Bug
  DistroRelease: Ubuntu 12.10
  Package: gnome-terminal 3.5.90-0ubuntu1
  ProcVersionSignature: Ubuntu 3.5.0-11.11-generic 3.5.2
  Uname: Linux 3.5.0-11-generic x86_64
  ApportVersion: 2.5.1-0ubuntu1
  Architecture: amd64
  Date: Thu Aug 23 23:21:07 2012
  ProcEnviron:
   TERM=xterm
   PATH=(custom, user)
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  SourcePackage: gnome-terminal
  UpgradeStatus: Upgraded to quantal on 2012-01-31 (204 days ago)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/gnome-terminal/+bug/1040885/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1077478] [NEW] Create archive on FTP

[KEIII]

Public bug reported:

Trying create archive in Ubuntu 12.10 on FTP thought Nautilus right
click Compress I got this message: Could not create the archive. You
don't have permission to create an archive in this folder. In Ubuntu
12.04 it's ok.

ProblemType: Bug
DistroRelease: Ubuntu 12.10
Package: gvfs 1.14.0-0ubuntu6
ProcVersionSignature: Ubuntu 3.5.0-18.29-generic 3.5.7
Uname: Linux 3.5.0-18-generic x86_64
NonfreeKernelModules: nvidia
ApportVersion: 2.6.1-0ubuntu6
Architecture: amd64
Date: Sun Nov 11 01:16:01 2012
InstallationDate: Installed on 2012-10-28 (13 days ago)
InstallationMedia: Ubuntu 12.10 "Quantal Quetzal" - Release amd64 (20121017.5)
MarkForUpload: True
SourcePackage: gvfs
UpgradeStatus: No upgrade log present (probably fresh install)

** Affects: gvfs (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: amd64 apport-bug quantal

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to gvfs in Ubuntu.
https://bugs.launchpad.net/bugs/1077478

Title:
  Create archive on FTP

Status in “gvfs” package in Ubuntu:
  New

Bug description:
  Trying create archive in Ubuntu 12.10 on FTP thought Nautilus right
  click Compress I got this message: Could not create the archive. You
  don't have permission to create an archive in this folder. In Ubuntu
  12.04 it's ok.

  ProblemType: Bug
  DistroRelease: Ubuntu 12.10
  Package: gvfs 1.14.0-0ubuntu6
  ProcVersionSignature: Ubuntu 3.5.0-18.29-generic 3.5.7
  Uname: Linux 3.5.0-18-generic x86_64
  NonfreeKernelModules: nvidia
  ApportVersion: 2.6.1-0ubuntu6
  Architecture: amd64
  Date: Sun Nov 11 01:16:01 2012
  InstallationDate: Installed on 2012-10-28 (13 days ago)
  InstallationMedia: Ubuntu 12.10 "Quantal Quetzal" - Release amd64 (20121017.5)
  MarkForUpload: True
  SourcePackage: gvfs
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/gvfs/+bug/1077478/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1077474] Re: "Top Rated" widget is a few (vertical) pixels too close to the others.

[Michael Hall]

** Description changed:

  Ubuntu Software Center 5.4.1.2, Ubuntu 12.10
  
- On the "All Software" home, the "Top Rated" panel is a tad to close to
- the ones above it; the spacing is not consistent.
+ On the "All Software" home, the vertical spacing between "Recommended
+ For You" and "Top Rated" sections should be the same distance as between
+ "What's New" and "Recommended For You" sections.

** Tags added: pixel-perfect

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to software-center in Ubuntu.
https://bugs.launchpad.net/bugs/1077474

Title:
  "Top Rated" widget is a few (vertical) pixels too close to the others.

Status in “software-center” package in Ubuntu:
  New

Bug description:
  Ubuntu Software Center 5.4.1.2, Ubuntu 12.10

  On the "All Software" home, the vertical spacing between "Recommended
  For You" and "Top Rated" sections should be the same distance as
  between "What's New" and "Recommended For You" sections.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/software-center/+bug/1077474/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1077477] [NEW] Downloading big file from FTP in Nautilus

[KEIII]

Public bug reported:

After several seconds after download starting I have message "Error
while copying file.zip. There was an error copying the file into
/home/user. Timeout was reached". In Ubuntu 12.04 it's ok.

ProblemType: Bug
DistroRelease: Ubuntu 12.10
Package: gvfs 1.14.0-0ubuntu6
ProcVersionSignature: Ubuntu 3.5.0-18.29-generic 3.5.7
Uname: Linux 3.5.0-18-generic x86_64
NonfreeKernelModules: nvidia
ApportVersion: 2.6.1-0ubuntu6
Architecture: amd64
Date: Sun Nov 11 01:12:05 2012
InstallationDate: Installed on 2012-10-28 (13 days ago)
InstallationMedia: Ubuntu 12.10 "Quantal Quetzal" - Release amd64 (20121017.5)
MarkForUpload: True
SourcePackage: gvfs
UpgradeStatus: No upgrade log present (probably fresh install)

** Affects: gvfs (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: amd64 apport-bug gvfs quantal

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to gvfs in Ubuntu.
https://bugs.launchpad.net/bugs/1077477

Title:
  Downloading big file from FTP in Nautilus

Status in “gvfs” package in Ubuntu:
  New

Bug description:
  After several seconds after download starting I have message "Error
  while copying file.zip. There was an error copying the file into
  /home/user. Timeout was reached". In Ubuntu 12.04 it's ok.

  ProblemType: Bug
  DistroRelease: Ubuntu 12.10
  Package: gvfs 1.14.0-0ubuntu6
  ProcVersionSignature: Ubuntu 3.5.0-18.29-generic 3.5.7
  Uname: Linux 3.5.0-18-generic x86_64
  NonfreeKernelModules: nvidia
  ApportVersion: 2.6.1-0ubuntu6
  Architecture: amd64
  Date: Sun Nov 11 01:12:05 2012
  InstallationDate: Installed on 2012-10-28 (13 days ago)
  InstallationMedia: Ubuntu 12.10 "Quantal Quetzal" - Release amd64 (20121017.5)
  MarkForUpload: True
  SourcePackage: gvfs
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/gvfs/+bug/1077477/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1029979] Re: Keyboard Layouts are not picked up from evdev.extras.xml

[Julien]

$ lsb_release -d
Description:Ubuntu 12.04.1 LTS

$ gnome-control-center --version
gnome-control-center 3.4.2

Same workaround test as Jasey:
copy layout from evdev.extras.xml into evdev.xml  and then it works

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to gnome-control-center in Ubuntu.
https://bugs.launchpad.net/bugs/1029979

Title:
  Keyboard Layouts are not picked up from evdev.extras.xml

Status in “gnome-control-center” package in Ubuntu:
  Confirmed

Bug description:
  Running Ubuntu 12.04 LTS

  In /usr/share/X11/xkb/rules there is the following XML Files

  base.xml
  base.extras.xml
  evdev.xml
  evdev.extras.xml

  plus some symbolic links.

  evdev & base are pretty much the same, and Gnome-control-center uses
  evdev files.

  evdev.extras.xml has information on extra language/keyboard layouts,
  including APL, Franch Canadian, Dvorak layouts, and so on. and these
  are not picked up by the keyboard layout in gnome-control-center.

  I copied the layout information from evdev.extras.xml and gnome-
  control-center picked these up, however after updates (to xkb) these
  files are reverted and the options are no longer available.

  gnome-control-center should look in both evdev.xml and
  evdev.extras.xml for these options

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/gnome-control-center/+bug/1029979/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1077474] [NEW] "Top Rated" widget is a few (vertical) pixels too close to the others.

[Sam Hewitt]

Public bug reported:

Ubuntu Software Center 5.4.1.2, Ubuntu 12.10

On the "All Software" home, the "Top Rated" panel is a tad to close to
the ones above it; the spacing is not consistent.

** Affects: software-center (Ubuntu)
 Importance: Undecided
 Status: New

** Attachment added: "Screenshot"
   
https://bugs.launchpad.net/bugs/1077474/+attachment/3429878/+files/usc-pixels.png

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to software-center in Ubuntu.
https://bugs.launchpad.net/bugs/1077474

Title:
  "Top Rated" widget is a few (vertical) pixels too close to the others.

Status in “software-center” package in Ubuntu:
  New

Bug description:
  Ubuntu Software Center 5.4.1.2, Ubuntu 12.10

  On the "All Software" home, the "Top Rated" panel is a tad to close to
  the ones above it; the spacing is not consistent.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/software-center/+bug/1077474/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1069031] Re: intel gma3600: X unable to start

[Козинцев Егор]

>>> Козинцев Егор (ekozincew)
>>> >> fbdev
>>>
>>> And get poor performance with slow interface?

Or this, or nothing! 
(rus: "Или так, или никак!" )

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xorg-server in Ubuntu.
https://bugs.launchpad.net/bugs/1069031

Title:
  intel gma3600: X unable to start

Status in X.Org X server:
  New
Status in “xorg-server” package in Ubuntu:
  Triaged

Bug description:
  X is unable to start on a Acer AOD270 intel atom netbook  with a
  gma3600 chipset when the gma500_gfx kernel driver is loaded.

  (xorg.0.log)

  [41.352] (EE) intel(0): [drm] Failed to detect GEM.  Kernel 2.6.28 
required.
  [41.352] (EE) intel(0): Failed to become DRM master.
  [41.352] (II) UnloadModule: "intel"
  [41.353] (EE) Screen(s) found, but none have a usable configuration.
  [41.353] Fatal server error:

  Workaround is to blacklist  the gma500_glx module, which  allows X to
  start by falling back to the vesa FB driver.

  Applying the patch described here fixes the problem without the need
  to blacklist.

  http://bugzillafiles.novell.org/attachment.cgi?id=499509

  ProblemType: Bug
  DistroRelease: Ubuntu 12.10
  Package: xserver-xorg-video-intel 2:2.20.9-0ubuntu2
  ProcVersionSignature: Ubuntu 3.5.0-17.28-generic 3.5.5
  Uname: Linux 3.5.0-17-generic i686
  NonfreeKernelModules: wl
  ApportVersion: 2.6.1-0ubuntu3
  Architecture: i386
  Date: Sat Oct 20 11:35:10 2012
  InstallationMedia: Xubuntu 12.04 LTS "Precise Pangolin" - Release i386 
(20120423)
  SourcePackage: xserver-xorg-video-intel
  UpgradeStatus: Upgraded to quantal on 2012-10-19 (1 days ago)

To manage notifications about this bug go to:
https://bugs.launchpad.net/xorg-server/+bug/1069031/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1077471] [NEW] after restart NM service we have doubled entries

[Pedro]

Public bug reported:

Im using raring but this problem also exists in quantal, when restarting
network-manager service, when clicking in NM plasma icon shows wifi
network entries two times.

If i restart NM service again, then it shows wifi network entries one
time like it should, however when pointing the mouse over the NM icon in
plasma panel continues showing doubled entries.

** Affects: network-manager (Ubuntu)
 Importance: Undecided
 Status: New

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to network-manager in Ubuntu.
https://bugs.launchpad.net/bugs/1077471

Title:
  after restart NM service we have doubled entries

Status in “network-manager” package in Ubuntu:
  New

Bug description:
  Im using raring but this problem also exists in quantal, when
  restarting network-manager service, when clicking in NM plasma icon
  shows wifi network entries two times.

  If i restart NM service again, then it shows wifi network entries one
  time like it should, however when pointing the mouse over the NM icon
  in plasma panel continues showing doubled entries.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1077471/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1072148] Re: Segfault on SiS 65x/M650/740 card

[Arie Skliarouk]

After reverting kernel from 3.5.0 to 3.2.0-32-generic, the bug went
away.

** Package changed: xserver-xorg-video-sis (Ubuntu) => linux (Ubuntu)

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xserver-xorg-video-sis in Ubuntu.
https://bugs.launchpad.net/bugs/1072148

Title:
  Segfault on SiS 65x/M650/740 card

Status in “linux” package in Ubuntu:
  New

Bug description:
  xserver-xorg-video-sis version 1:0.10.7-0ubuntu1 (as provided by 12.10
  - quantal distro) segfaults on startup.

  In ubuntu 12.04 it worked.
  --- 
  ApportVersion: 2.6.1-0ubuntu6
  Architecture: i386
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  lightdm1726 F pulseaudio
   /dev/snd/seq:timidity   1189 F timidity
  CRDA: Error: command ['iw', 'reg', 'get'] failed with exit code 1: nl80211 
not found.
  DistroRelease: Ubuntu 12.10
  HibernationDevice: RESUME=UUID=f163a672-8e09-4665-84bc-52690d389808
  InstallationDate: Installed on 2012-01-04 (311 days ago)
  InstallationMedia: Ubuntu 11.10 "Oneiric Ocelot" - Release i386 (20111012)
  IwConfig:
   lono wireless extensions.
   
   eth0  no wireless extensions.
  MachineType: System Manufacturer System Name
  MarkForUpload: True
  Package: linux (not installed)
  ProcFB: 0 VESA VGA
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.2.0-32-generic 
root=UUID=7157a823-2975-4071-8cd9-a4ae58f6b38f ro quiet splash vt.handoff=7
  ProcVersionSignature: Ubuntu 3.2.0-32.51-generic 3.2.30
  PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No 
PulseAudio daemon running, or not running as session daemon.
  RelatedPackageVersions:
   linux-restricted-modules-3.2.0-32-generic N/A
   linux-backports-modules-3.2.0-32-generic  N/A
   linux-firmware1.95
  RfKill:
   
  Tags:  quantal
  Uname: Linux 3.2.0-32-generic i686
  UpgradeStatus: Upgraded to quantal on 2012-10-26 (15 days ago)
  UserGroups:
   
  dmi.bios.date: 11/10/2003
  dmi.bios.vendor: Award Software, Inc.
  dmi.bios.version: ASUS P4SQ ACPI BIOS Revision 1004
  dmi.board.name: P4SQ
  dmi.board.vendor: ASUSTeK Computer INC.
  dmi.board.version: REV 1.xx
  dmi.chassis.asset.tag: Asset-1234567890
  dmi.chassis.type: 7
  dmi.chassis.vendor: Chassis Manufacture
  dmi.chassis.version: Chassis Version
  dmi.modalias: 
dmi:bvnAwardSoftware,Inc.:bvrASUSP4SQACPIBIOSRevision1004:bd11/10/2003:svnSystemManufacturer:pnSystemName:pvrSystemVersion:rvnASUSTeKComputerINC.:rnP4SQ:rvrREV1.xx:cvnChassisManufacture:ct7:cvrChassisVersion:
  dmi.product.name: System Name
  dmi.product.version: System Version
  dmi.sys.vendor: System Manufacturer

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1072148/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1076815] Re: Pidgin not in messaging menu

[Launchpad Bug Tracker]

Status changed to 'Confirmed' because the bug affects multiple users.

** Changed in: pidgin (Ubuntu)
   Status: New => Confirmed

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to pidgin in Ubuntu.
https://bugs.launchpad.net/bugs/1076815

Title:
  Pidgin not in messaging menu

Status in “pidgin” package in Ubuntu:
  Confirmed

Bug description:
  There is no pidgin in the messaging menu, only gwibber and unity-mail
  shows.

  ProblemType: Bug
  DistroRelease: Ubuntu 13.04
  Package: pidgin 1:2.10.6-0ubuntu2
  ProcVersionSignature: Ubuntu 3.5.0-17.28-generic 3.5.5
  Uname: Linux 3.5.0-17-generic i686
  ApportVersion: 2.6.2-0ubuntu2
  Architecture: i386
  Date: Fri Nov  9 00:34:10 2012
  InstallationDate: Installed on 2012-11-08 (0 days ago)
  InstallationMedia: Ubuntu 13.04 "Raring Ringtail" - Alpha i386 (20121108.2)
  MarkForUpload: True
  SourcePackage: pidgin
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/pidgin/+bug/1076815/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1077431]

[Ubuntu Foundation's Bug Bot]

The attachment "X.7.diff" of this bug report has been identified as
being a patch.  The ubuntu-reviewers team has been subscribed to the bug
report so that they can review the patch.  In the event that this is in
fact not a patch you can resolve this situation by removing the tag
'patch' from the bug report and editing the attachment so that it is not
flagged as a patch.  Additionally, if you are member of the ubuntu-
reviewers team please also unsubscribe the team from this bug report.

[This is an automated message performed by a Launchpad user owned by
Brian Murray.  Please contact him regarding any issues with the action
taken in this bug report.]

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xorg-docs in Ubuntu.
https://bugs.launchpad.net/bugs/1077431

Title:
  X.7: Unnecessary escape before "+"; some other corrections to the
  manual

Status in “xorg-docs” package in Ubuntu:
  New

Bug description:
  Software: xorg-docs-core
  Version: 1:1.5-1
  File: X.7
  Patch: Yes

Warnings from "GROFF_ENCODING=utf8 groff -b -ww -mandoc -z ..."

  groff: X.7: /usr/share/groff/1.20.1/tmac/an-old.tmac:371: backtrace: macro `B'
  :714: warning: escape character ignored before `+'

Some hyphens changed to minus (dash)

End of sentence punctuation marks (.?) protected with "\&"

Some tab's width shortened.
   
  #
Output from "nroff" should (usually) have only the left margin
  adjusted (".ad l").  Otherwise the space between words can be too long.

Output for a manual should (usually) have the right margin ragged
  (".ad l"), as it is not (usually) intended for a book or other
  professional printing medium.
   
  #
Each sentence should begin in a new line.

  a) The space between sentences is different between formatters.

  b) Changes in one line do then not affect others, and do therefore not
  appear as changed in the output of "diff".
   
  #
Sometimes a small change in space between a roman and an italic
  character is needed (use ".RI" or ".IR" macros).
   
  #
Remove spaces at end of lines.
   
  #
Protect the last full stop (period) in abbreviations or ellipses
  (with \&) if it is not at the end of a sentence.
   
  #
Protect the full stop (period) at the beginning of text (word) or
  ellipsis.
   
  #
Protect a single quote (', apostrophe) (with \&) at the start of the
  quoted text.

  ##

   
  ProblemType: Bug
  Architecture: amd64
  Date: Sat Nov 10 18:27:21 2012
  Dependencies:
  DistroRelease: Ubuntu 10.04
  Package: xorg-docs-core 1:1.5-1
  PackageArchitecture: all
  ProcEnviron:
   PATH=(custom, no user)
   LOCPATH=/var/tmp/username/lib/locale
   LANG=is_IS.ISO-8859-1
   SHELL=/bin/csh
  ProcVersionSignature: Ubuntu 2.6.35-25.44~lucid1-generic 2.6.35.10
  SourcePackage: xorg-docs
  Tags: lucid
  Uname: Linux 2.6.35-25-generic x86_64


Patch is in the attchment

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/xorg-docs/+bug/1077431/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1073794] Re: Free proprietary apps appear as "previously pruchased"

[Chris Wilson]

** Changed in: hundredpapercuts
Milestone: None => raring-round-4

** Changed in: hundredpapercuts
   Status: New => Confirmed

** Also affects: software-center
   Importance: Undecided
   Status: New

** Changed in: hundredpapercuts
   Importance: Undecided => Low

** Changed in: hundredpapercuts
 Assignee: (unassigned) => Papercuts Ninja (papercuts-ninja)

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to software-center in Ubuntu.
https://bugs.launchpad.net/bugs/1073794

Title:
  Free proprietary apps appear as "previously pruchased"

Status in One Hundred Paper Cuts:
  Confirmed
Status in Ubuntu Software Center:
  New
Status in “software-center” package in Ubuntu:
  New

Bug description:
  It is now possible to see apps that were previously purchased in the
  "previous purchases" section.

  However, free (as in "free beer") proprietary apps are also listed as
  "previsouly purchased" even though no transaction was made in the
  first place.

  There are 2 problems with this:
  - It is semantically incorrect to qualify those apps as "previously 
pruchased", which can also be confusing for the user;
  - Free proprietary apps are given more visibility than free open-source apps.

  Free proprietary apps should not be listed as "previously purchased".

  ProblemType: Bug
  DistroRelease: Ubuntu 12.10
  Package: software-center 5.4.1.2
  ProcVersionSignature: Ubuntu 3.5.0-18.29-generic 3.5.7
  Uname: Linux 3.5.0-18-generic i686
  ApportVersion: 2.6.1-0ubuntu6
  Architecture: i386
  Date: Thu Nov  1 13:30:18 2012
  InstallationDate: Installed on 2012-10-21 (10 days ago)
  InstallationMedia: Ubuntu 12.10 "Quantal Quetzal" - Release i386 (20121017.2)
  MarkForUpload: True
  PackageArchitecture: all
  ProcEnviron:
   LANGUAGE=en_AU:en
   PATH=(custom, no user)
   XDG_RUNTIME_DIR=
   LANG=en_AU.UTF-8
   SHELL=/bin/bash
  SourcePackage: software-center
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/hundredpapercuts/+bug/1073794/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1077462] [NEW] graphy interface get very slow nearly stuck after suspend

[John Youi]

Public bug reported:

this problem show up in version from ubuntu 10.10 to ubuntu 12.10 and I
don't know the reason because it's randomly. but I guest it's nvidia
driver's bug because this problem never happen with open source
driver(maybe, but I never met it after upgraded to 12.10)

and today, I install the nvidia offical driver 310.14, the problem show
up again after a long time no see.

Lenvo B460 with Geforece 310M (notebook).

sorry, I'm a first-time bug repoter and no more imformation I can
afford.

** Affects: nvidia-graphics-drivers (Ubuntu)
 Importance: Undecided
 Status: New

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to nvidia-graphics-drivers in Ubuntu.
https://bugs.launchpad.net/bugs/1077462

Title:
  graphy interface get very slow nearly stuck after suspend

Status in “nvidia-graphics-drivers” package in Ubuntu:
  New

Bug description:
  this problem show up in version from ubuntu 10.10 to ubuntu 12.10 and
  I don't know the reason because it's randomly. but I guest it's nvidia
  driver's bug because this problem never happen with open source
  driver(maybe, but I never met it after upgraded to 12.10)

  and today, I install the nvidia offical driver 310.14, the problem
  show up again after a long time no see.

  Lenvo B460 with Geforece 310M (notebook).

  sorry, I'm a first-time bug repoter and no more imformation I can
  afford.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/nvidia-graphics-drivers/+bug/1077462/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp