[Desktop-packages] [Bug 339841] Re: Adding alarm to a calendar event in evolution causes wrong time in nokia phone when synced
** Changed in: evolution Status: New => Incomplete -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to evolution in Ubuntu. https://bugs.launchpad.net/bugs/339841 Title: Adding alarm to a calendar event in evolution causes wrong time in nokia phone when synced Status in The Evolution Mail & Calendaring Tool: Incomplete Status in “evolution” package in Ubuntu: Triaged Bug description: Binary package hint: evolution Adding an alert to an appointment or creating an appointment with alarm causes an incorrect appointment time in my mobile phone (3120 classic) How to reproduce: 1. Create a calendar event in evolution (without reminder) 2. Sync with mobile phone, check that the time in phone is correct 3. Add calendar alarm to the event with Evolution, say one hour before the appointment 4. Synchronize again and see the event time in phone shifted by the time zone offset (two hours in my case) Setting the alarm in phone and synchronizing works fine. - Ubuntu 8.10 To manage notifications about this bug go to: https://bugs.launchpad.net/evolution/+bug/339841/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1218890] Re: eps import fails, graphics filter not found
Launchpad has imported 7 comments from the remote bug at https://bugs.gentoo.org/show_bug.cgi?id=478648. If you reply to an imported comment from within Launchpad, your comment will be sent to the remote bug automatically. Read more about Launchpad's inter-bugtracker facilities at https://help.launchpad.net/InterBugTracking. On 2013-07-29T11:59:37+00:00 Tdalman wrote: Created attachment 354498 libreoffice dialog when exporting an ODG to EPS. I recently upgraded libreoffice to 4.1. I remember that exporting an ODG to EPS was no problem (I think imagemagick's convert was used then). However, that does not work. I get 'Graphics filter not found', however I don't know how to fix it. I can't find any use flags or libreoffice extensions. Any idea ? Reply at: https://bugs.launchpad.net/ubuntu/+source/libreoffice/+bug/1218890/comments/0 On 2013-07-29T12:00:07+00:00 Tdalman wrote: Created attachment 354500 emerge --info Reply at: https://bugs.launchpad.net/ubuntu/+source/libreoffice/+bug/1218890/comments/1 On 2013-07-30T22:45:54+00:00 C Michal wrote: I see this too. But (even worse?), it also can't import eps, same error message. Reply at: https://bugs.launchpad.net/ubuntu/+source/libreoffice/+bug/1218890/comments/2 On 2013-08-13T00:58:50+00:00 C Michal wrote: There is an upstream bug: https://bugs.freedesktop.org/show_bug.cgi?id=67602 that makes this sound like a packaging problem. Apparently the Ubuntu PPA version has the same problem and Suse as well: https://bugzilla.novell.com/show_bug.cgi?id=834374 Reply at: https://bugs.launchpad.net/ubuntu/+source/libreoffice/+bug/1218890/comments/12 On 2013-09-01T20:13:53+00:00 Tdalman wrote: Libreoffice 4.1.1.2 still doesn't work (btw, thanks for reporting upstream, Carl). Reply at: https://bugs.launchpad.net/ubuntu/+source/libreoffice/+bug/1218890/comments/17 On 2013-09-03T20:55:27+00:00 C Michal wrote: After rebuilding LO a few times, I've found that removing --enable- mergelibs from the configure command makes this problem go away. I will report it upstream, but is there a good reason not to remove this option from the ebuild? Reply at: https://bugs.launchpad.net/ubuntu/+source/libreoffice/+bug/1218890/comments/21 On 2013-09-04T15:42:31+00:00 Bjoern-michaelsen-e wrote: Should be fixed with upstream fix: https://gerrit.libreoffice.org/#/c/5811/ see also: https://launchpad.net/bugs/1218890 https://bugzilla.novell.com/show_bug.cgi?id=834374 https://bugs.freedesktop.org/show_bug.cgi?id=68210 Reply at: https://bugs.launchpad.net/ubuntu/+source/libreoffice/+bug/1218890/comments/23 ** Changed in: libreoffice (Gentoo Linux) Status: Unknown => New ** Changed in: libreoffice (Gentoo Linux) Importance: Unknown => Medium -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to libreoffice in Ubuntu. https://bugs.launchpad.net/bugs/1218890 Title: eps import fails, graphics filter not found Status in LibreOffice Productivity Suite: Unknown Status in “libreoffice” package in Ubuntu: New Status in “libreoffice” package in Gentoo Linux: New Status in “libreoffice” package in openSUSE: Unknown Bug description: This bug showed up since 4.1.0. I just upgraded to 4.1.1, and its still there. $ lsb_release -rd Description:Ubuntu 12.04.3 LTS Release:12.04 $ apt-cache policy libreoffice libreoffice: Installed: 1:4.1.1~rc2-1ubuntu1~precise1~ppa2 Candidate: 1:4.1.1~rc2-1ubuntu1~precise1~ppa2 Version table: *** 1:4.1.1~rc2-1ubuntu1~precise1~ppa2 0 500 http://ppa.launchpad.net/libreoffice/libreoffice-4-1/ubuntu/ precise/main i386 Packages 100 /var/lib/dpkg/status There is also an Upstream Bug: https://bugs.freedesktop.org/show_bug.cgi?id=67602 But this is clearly an Ubuntu Building/Packaging problem, packages from www.libreoffice.org don't show the bug. To manage notifications about this bug go to: https://bugs.launchpad.net/df-libreoffice/+bug/1218890/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1026847] Re: [MacPro5, 1, Realtek ALC889A, Green Headphone Out, Front] No sound at all
seems like node 19 is the one from front panel and it is working axet@axet-MacPro:~$ sudo hda-jack-sense-test Pin 0x18 (Pink Mic): present = No Pin 0x19 (Green HP Out): present = No Pin 0x1a (Blue Line In): present = No axet@axet-MacPro:~$ sudo hda-jack-sense-test Pin 0x18 (Pink Mic): present = No Pin 0x19 (Green HP Out): present = Yes Pin 0x1a (Blue Line In): present = No axet@axet-MacPro:~$ this machine has on the front panel one jack TRRS connector. on the back: line in, line out, two hd radeon video cards with 2 each mini display ports (which produces 4 sound devices if connected to the apple monitors) + internal speakers which can sound when no headphones are connected. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to alsa-driver in Ubuntu. https://bugs.launchpad.net/bugs/1026847 Title: [MacPro5,1, Realtek ALC889A, Green Headphone Out, Front] No sound at all Status in “alsa-driver” package in Ubuntu: New Bug description: Speaker works fine. The head phones do not work when I plug it in the front headphone jack. I have tried so so so many different things, none of them worked for me. ProblemType: Bug DistroRelease: Ubuntu 12.04 Package: alsa-base 1.0.25+dfsg-0ubuntu1 ProcVersionSignature: Ubuntu 3.2.0-26.41-generic 3.2.19 Uname: Linux 3.2.0-26-generic x86_64 NonfreeKernelModules: wl fglrx AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24. ApportVersion: 2.0.1-0ubuntu11 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: abinash 32605 F pulseaudio /dev/snd/controlC0: abinash 32605 F pulseaudio /dev/snd/controlC2: abinash 32605 F pulseaudio Card0.Amixer.info: Card hw:0 'Intel'/'HDA Intel at 0xa052 irq 67' Mixer name : 'Realtek ALC889A' Components : 'HDA:10ec0885,106b4200,00100103' Controls : 28 Simple ctrls : 10 Card1.Amixer.info: Card hw:1 'Generic'/'HD-Audio Generic at 0xa044 irq 68' Mixer name : 'ATI R6xx HDMI' Components : 'HDA:1002aa01,00aa0100,00100200' Controls : 6 Simple ctrls : 1 Card1.Amixer.values: Simple mixer control 'IEC958',0 Capabilities: pswitch pswitch-joined penum Playback channels: Mono Mono: Playback [on] Card2.Amixer.info: Card hw:2 'U0x46d0x81b'/'USB Device 0x46d:0x81b at usb-:00:1d.7-3, high speed' Mixer name : 'USB Mixer' Components : 'USB046d:081b' Controls : 2 Simple ctrls : 1 Card2.Amixer.values: Simple mixer control 'Mic',0 Capabilities: cvolume cvolume-joined cswitch cswitch-joined penum Capture channels: Mono Limits: Capture 0 - 6144 Mono: Capture 6144 [100%] [30.00dB] [on] Date: Thu Jul 19 12:40:51 2012 InstallationMedia: Ubuntu 11.10 "Oneiric Ocelot" - Release amd64 (20111012) PackageArchitecture: all ProcEnviron: LANGUAGE=en_US:en PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash SourcePackage: alsa-driver Symptom: audio Symptom_AlsaPlaybackTest: ALSA playback test through plughw:Intel failed Symptom_Card: Built-in Audio - HDA Intel Symptom_DevicesInUse: 32605 32605 32605 abinash F pulseaudio /dev/snd/controlC0: abinash F pulseaudio /dev/snd/controlC2: abinash F pulseaudio Symptom_Jack: Green Headphone Out, Rear Symptom_Type: No sound at all Title: [MacPro5,1, Realtek ALC889A, Green Headphone Out, Rear] No sound at all UpgradeStatus: Upgraded to precise on 2012-06-26 (22 days ago) dmi.bios.date: 10/07/10 dmi.bios.vendor: Apple Inc. dmi.bios.version: MP51.88Z.007F.B03.1010071432 dmi.board.asset.tag: 0 dmi.board.name: Mac-F221BEC8 dmi.board.vendor: Apple Inc. dmi.chassis.type: 7 dmi.chassis.vendor: Apple Inc. dmi.chassis.version: Mac-F221BEC8 dmi.modalias: dmi:bvnAppleInc.:bvrMP51.88Z.007F.B03.1010071432:bd10/07/10:svnAppleInc.:pnMacPro5,1:pvr0.0:rvnAppleInc.:rnMac-F221BEC8:rvr:cvnAppleInc.:ct7:cvrMac-F221BEC8: dmi.product.name: MacPro5,1 dmi.product.version: 0.0 dmi.sys.vendor: Apple Inc. mtime.conffile..etc.modprobe.d.alsa.base.conf: 2012-07-17T10:37:08.120965 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1026847/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1026847] Re: [MacPro5, 1, Realtek ALC889A, Green Headphone Out, Front] No sound at all
and on the back two S/PDIF (red eye) connectors -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to alsa-driver in Ubuntu. https://bugs.launchpad.net/bugs/1026847 Title: [MacPro5,1, Realtek ALC889A, Green Headphone Out, Front] No sound at all Status in “alsa-driver” package in Ubuntu: New Bug description: Speaker works fine. The head phones do not work when I plug it in the front headphone jack. I have tried so so so many different things, none of them worked for me. ProblemType: Bug DistroRelease: Ubuntu 12.04 Package: alsa-base 1.0.25+dfsg-0ubuntu1 ProcVersionSignature: Ubuntu 3.2.0-26.41-generic 3.2.19 Uname: Linux 3.2.0-26-generic x86_64 NonfreeKernelModules: wl fglrx AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24. ApportVersion: 2.0.1-0ubuntu11 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: abinash 32605 F pulseaudio /dev/snd/controlC0: abinash 32605 F pulseaudio /dev/snd/controlC2: abinash 32605 F pulseaudio Card0.Amixer.info: Card hw:0 'Intel'/'HDA Intel at 0xa052 irq 67' Mixer name : 'Realtek ALC889A' Components : 'HDA:10ec0885,106b4200,00100103' Controls : 28 Simple ctrls : 10 Card1.Amixer.info: Card hw:1 'Generic'/'HD-Audio Generic at 0xa044 irq 68' Mixer name : 'ATI R6xx HDMI' Components : 'HDA:1002aa01,00aa0100,00100200' Controls : 6 Simple ctrls : 1 Card1.Amixer.values: Simple mixer control 'IEC958',0 Capabilities: pswitch pswitch-joined penum Playback channels: Mono Mono: Playback [on] Card2.Amixer.info: Card hw:2 'U0x46d0x81b'/'USB Device 0x46d:0x81b at usb-:00:1d.7-3, high speed' Mixer name : 'USB Mixer' Components : 'USB046d:081b' Controls : 2 Simple ctrls : 1 Card2.Amixer.values: Simple mixer control 'Mic',0 Capabilities: cvolume cvolume-joined cswitch cswitch-joined penum Capture channels: Mono Limits: Capture 0 - 6144 Mono: Capture 6144 [100%] [30.00dB] [on] Date: Thu Jul 19 12:40:51 2012 InstallationMedia: Ubuntu 11.10 "Oneiric Ocelot" - Release amd64 (20111012) PackageArchitecture: all ProcEnviron: LANGUAGE=en_US:en PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash SourcePackage: alsa-driver Symptom: audio Symptom_AlsaPlaybackTest: ALSA playback test through plughw:Intel failed Symptom_Card: Built-in Audio - HDA Intel Symptom_DevicesInUse: 32605 32605 32605 abinash F pulseaudio /dev/snd/controlC0: abinash F pulseaudio /dev/snd/controlC2: abinash F pulseaudio Symptom_Jack: Green Headphone Out, Rear Symptom_Type: No sound at all Title: [MacPro5,1, Realtek ALC889A, Green Headphone Out, Rear] No sound at all UpgradeStatus: Upgraded to precise on 2012-06-26 (22 days ago) dmi.bios.date: 10/07/10 dmi.bios.vendor: Apple Inc. dmi.bios.version: MP51.88Z.007F.B03.1010071432 dmi.board.asset.tag: 0 dmi.board.name: Mac-F221BEC8 dmi.board.vendor: Apple Inc. dmi.chassis.type: 7 dmi.chassis.vendor: Apple Inc. dmi.chassis.version: Mac-F221BEC8 dmi.modalias: dmi:bvnAppleInc.:bvrMP51.88Z.007F.B03.1010071432:bd10/07/10:svnAppleInc.:pnMacPro5,1:pvr0.0:rvnAppleInc.:rnMac-F221BEC8:rvr:cvnAppleInc.:ct7:cvrMac-F221BEC8: dmi.product.name: MacPro5,1 dmi.product.version: 0.0 dmi.sys.vendor: Apple Inc. mtime.conffile..etc.modprobe.d.alsa.base.conf: 2012-07-17T10:37:08.120965 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1026847/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 261595]
Hi Irving, thanks for the review. For some reason I did not get/read the notification email from Mozilla. I, too, noticed that there are other places which would deserve attention and use of a similar function. However, I would prefer this patch to go through first, and that we make another bug to (1) identify those code segments/files, (2) discuss the appropriate solution for each and, then, (3) write a patch, which I can help with. So I would ask for this patch to go through as is, since you indicated it is ok. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to thunderbird in Ubuntu. https://bugs.launchpad.net/bugs/261595 Title: Thunderbird corrupts Mailbox when hd is full Status in Mozilla Thunderbird Mail and News: Fix Released Status in “thunderbird” package in Ubuntu: Triaged Bug description: Binary package hint: mozilla-thunderbird I fetched the POP3 EMails and the last Message got cut in the middle. Other than in Bug #23302 there was NO warning about little space. Then I got a warning after the error the little space and freed some space up. Now it fetched all allready fetched mails again and added some junk from another email into the unfinished email. In the end this is not so severe, but the check for little space should kick in before and it should not get to corruption of email data. Seen in ubuntu 8.04.1 with thunderbird 2.0.0.16. To manage notifications about this bug go to: https://bugs.launchpad.net/thunderbird/+bug/261595/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 261595]
I have marked the bug so that the patch will be checked in. Johannes, please file the follow-up bug for the remaining work on the other similar places. Please CC me there. I hope you can work on that bug too. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to thunderbird in Ubuntu. https://bugs.launchpad.net/bugs/261595 Title: Thunderbird corrupts Mailbox when hd is full Status in Mozilla Thunderbird Mail and News: Fix Released Status in “thunderbird” package in Ubuntu: Triaged Bug description: Binary package hint: mozilla-thunderbird I fetched the POP3 EMails and the last Message got cut in the middle. Other than in Bug #23302 there was NO warning about little space. Then I got a warning after the error the little space and freed some space up. Now it fetched all allready fetched mails again and added some junk from another email into the unfinished email. In the end this is not so severe, but the check for little space should kick in before and it should not get to corruption of email data. Seen in ubuntu 8.04.1 with thunderbird 2.0.0.16. To manage notifications about this bug go to: https://bugs.launchpad.net/thunderbird/+bug/261595/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 261595]
The follow-up bug is at Bug 912465 (feel free to change the component, etc). Lets continue there. Thank you Irving, Aceman, and Ryan. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to thunderbird in Ubuntu. https://bugs.launchpad.net/bugs/261595 Title: Thunderbird corrupts Mailbox when hd is full Status in Mozilla Thunderbird Mail and News: Fix Released Status in “thunderbird” package in Ubuntu: Triaged Bug description: Binary package hint: mozilla-thunderbird I fetched the POP3 EMails and the last Message got cut in the middle. Other than in Bug #23302 there was NO warning about little space. Then I got a warning after the error the little space and freed some space up. Now it fetched all allready fetched mails again and added some junk from another email into the unfinished email. In the end this is not so severe, but the check for little space should kick in before and it should not get to corruption of email data. Seen in ubuntu 8.04.1 with thunderbird 2.0.0.16. To manage notifications about this bug go to: https://bugs.launchpad.net/thunderbird/+bug/261595/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 261595]
https://hg.mozilla.org/comm-central/rev/92726142b524 -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to thunderbird in Ubuntu. https://bugs.launchpad.net/bugs/261595 Title: Thunderbird corrupts Mailbox when hd is full Status in Mozilla Thunderbird Mail and News: Fix Released Status in “thunderbird” package in Ubuntu: Triaged Bug description: Binary package hint: mozilla-thunderbird I fetched the POP3 EMails and the last Message got cut in the middle. Other than in Bug #23302 there was NO warning about little space. Then I got a warning after the error the little space and freed some space up. Now it fetched all allready fetched mails again and added some junk from another email into the unfinished email. In the end this is not so severe, but the check for little space should kick in before and it should not get to corruption of email data. Seen in ubuntu 8.04.1 with thunderbird 2.0.0.16. To manage notifications about this bug go to: https://bugs.launchpad.net/thunderbird/+bug/261595/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1130857] Re: Some images have a blue tint
Launchpad has imported 15 comments from the remote bug at https://bugzilla.mozilla.org/show_bug.cgi?id=817356. If you reply to an imported comment from within Launchpad, your comment will be sent to the remote bug automatically. Read more about Launchpad's inter-bugtracker facilities at https://help.launchpad.net/InterBugTracking. On 2012-12-02T02:47:58+00:00 Steve-c wrote: Bug 486918 added new image resizers from SKIA. Since this was enabled resized images on my ppc32 machine show up with a blue tint. The convolver code extracts the RGBA bits from each 32 bit pixel but doesn't take the endian order into account. Reply at: https://bugs.launchpad.net/ubuntu/+source/firefox/+bug/1130857/comments/0 On 2012-12-02T02:52:10+00:00 Steve-c wrote: Created attachment 687479 proposed fix. Detect that this is a PPC and set the BENDIAN then use that when extracting the bits Reply at: https://bugs.launchpad.net/ubuntu/+source/firefox/+bug/1130857/comments/1 On 2012-12-03T15:50:36+00:00 Joe-drew wrote: Comment on attachment 687479 proposed fix. Detect that this is a PPC and set the BENDIAN then use that when extracting the bits Review of attachment 687479: - ::: gfx/2d/convolver.cpp @@ +206,3 @@ >if (has_alpha) > +accum[3] += cur_filter * source_data_rows[filter_y][byte_offset + > + A_OFFSET_IDX]; Can you just leave these all on the same line? @@ +231,5 @@ >// >// We only need to do this when generating the final output row (here). > + int max_color_channel = NS_MAX(out_row[byte_offset + R_OFFSET_IDX], > + NS_MAX(out_row[byte_offset + G_OFFSET_IDX], out_row[byte_offset > + + B_OFFSET_IDX])); Same line here too Reply at: https://bugs.launchpad.net/ubuntu/+source/firefox/+bug/1130857/comments/2 On 2012-12-04T04:16:27+00:00 Steve-c wrote: Created attachment 688092 v2 of the patch, all one one line but this exceeds 80 characters Reply at: https://bugs.launchpad.net/ubuntu/+source/firefox/+bug/1130857/comments/3 On 2012-12-04T04:32:56+00:00 Steve-c wrote: Created attachment 688094 v3 has the line break but in a better spot Reply at: https://bugs.launchpad.net/ubuntu/+source/firefox/+bug/1130857/comments/4 On 2012-12-09T20:21:48+00:00 Landry-openbsd wrote: Pushed v3 in https://hg.mozilla.org/integration/mozilla- inbound/rev/69b924c155b0 Reply at: https://bugs.launchpad.net/ubuntu/+source/firefox/+bug/1130857/comments/5 On 2012-12-09T20:28:17+00:00 Matt-woodrow wrote: I would strongly recommend that the change to SkPreConfig.h gets a patch file added to gfx/skia/patches, or that this change be upstreamed to google's skia repo (or both!). Otherwise this change is at risk of being overwritten when we next update skia. Reply at: https://bugs.launchpad.net/ubuntu/+source/firefox/+bug/1130857/comments/6 On 2012-12-10T02:21:03+00:00 Steve-c wrote: submitted for review upstream https://codereview.appspot.com/6900063/ Reply at: https://bugs.launchpad.net/ubuntu/+source/firefox/+bug/1130857/comments/7 On 2012-12-10T02:22:35+00:00 Steve-c wrote: Created attachment 690255 adds the changes to SkPreConfig.h as a patch listed in gfx/skia/patches This patch will add a patch file in gfx/skia/patches to alter SkPreConfig.h the next time we import upstream sources Reply at: https://bugs.launchpad.net/ubuntu/+source/firefox/+bug/1130857/comments/8 On 2012-12-10T02:52:07+00:00 Joe-drew wrote: Sorry! I was confusing SkPreConfig.h with SkUserConfig.h, and incorrectly figured it didn't need to have a separate patch. Reply at: https://bugs.launchpad.net/ubuntu/+source/firefox/+bug/1130857/comments/9 On 2012-12-10T19:06:18+00:00 Ryanvm wrote: https://hg.mozilla.org/mozilla-central/rev/69b924c155b0 Reply at: https://bugs.launchpad.net/ubuntu/+source/firefox/+bug/1130857/comments/10 On 2013-03-09T16:23:53+00:00 Landry-openbsd wrote: Apparently attachment #690255 never went through review in m-c nor commited, and neither up
[Desktop-packages] [Bug 261595] Re: Thunderbird corrupts Mailbox when hd is full
** Changed in: thunderbird Status: In Progress => Fix Released -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to thunderbird in Ubuntu. https://bugs.launchpad.net/bugs/261595 Title: Thunderbird corrupts Mailbox when hd is full Status in Mozilla Thunderbird Mail and News: Fix Released Status in “thunderbird” package in Ubuntu: Triaged Bug description: Binary package hint: mozilla-thunderbird I fetched the POP3 EMails and the last Message got cut in the middle. Other than in Bug #23302 there was NO warning about little space. Then I got a warning after the error the little space and freed some space up. Now it fetched all allready fetched mails again and added some junk from another email into the unfinished email. In the end this is not so severe, but the check for little space should kick in before and it should not get to corruption of email data. Seen in ubuntu 8.04.1 with thunderbird 2.0.0.16. To manage notifications about this bug go to: https://bugs.launchpad.net/thunderbird/+bug/261595/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1220553] Re: [Acer Aspire One 725, ATI R6xx HDMI, Digital Out, HDMI] No sound at all
** Description changed: I had sound working until installing an update on 09.03. -Sound working in guest account. - Can't play test sounds: when clicking the button no window is popping up with the left/right soundtest. + + AFTER an update on 09.05 I restarted the system and there was still no + sound. I started Sound Settings and realized, that the machine tied to + play sound trough HDMI and not the built-in speakers. I clicked on the + Built-in Audio on the right and the sound started working. I consider + this bug fixed. + ProblemType: Bug DistroRelease: Ubuntu 13.10 Package: alsa-base 1.0.25+dfsg-0ubuntu4 ProcVersionSignature: Ubuntu 3.11.0-4.9-generic 3.11.0-rc7 Uname: Linux 3.11.0-4-generic x86_64 ApportVersion: 2.12.1-0ubuntu3 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: norbs 2189 F pulseaudio Date: Wed Sep 4 09:14:27 2013 InstallationDate: Installed on 2013-08-30 (4 days ago) InstallationMedia: Ubuntu 13.10 "Saucy Salamander" - Alpha amd64 (20130829) MarkForUpload: True PackageArchitecture: all SourcePackage: alsa-driver Symptom: audio Symptom_AlsaPlaybackTest: ALSA playback test through plughw:Generic failed Symptom_Card: Built-in Audio - HD-Audio Generic Symptom_DevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: norbs 2189 F pulseaudio Symptom_Jack: Digital Out, HDMI Symptom_Type: No sound at all Title: [AO725, ATI R6xx HDMI, Digital Out, HDMI] No sound at all UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 04/18/2013 dmi.bios.vendor: Insyde Corp. dmi.bios.version: V1.07 dmi.board.asset.tag: Base Board Asset Tag dmi.board.name: ZA10_BZ dmi.board.vendor: Acer dmi.board.version: Base Board Version dmi.chassis.type: 10 dmi.chassis.vendor: Chassis Manufacturer dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnInsydeCorp.:bvrV1.07:bd04/18/2013:svnAcer:pnAO725:pvrV1.07:rvnAcer:rnZA10_BZ:rvrBaseBoardVersion:cvnChassisManufacturer:ct10:cvrChassisVersion: dmi.product.name: AO725 dmi.product.version: V1.07 dmi.sys.vendor: Acer ** Changed in: alsa-driver (Ubuntu) Status: New => Fix Released -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to alsa-driver in Ubuntu. https://bugs.launchpad.net/bugs/1220553 Title: [Acer Aspire One 725, ATI R6xx HDMI, Digital Out, HDMI] No sound at all Status in “alsa-driver” package in Ubuntu: Fix Released Bug description: I had sound working until installing an update on 09.03. -Sound working in guest account. - Can't play test sounds: when clicking the button no window is popping up with the left/right soundtest. AFTER an update on 09.05 I restarted the system and there was still no sound. I started Sound Settings and realized, that the machine tied to play sound trough HDMI and not the built-in speakers. I clicked on the Built-in Audio on the right and the sound started working. I consider this bug fixed. ProblemType: Bug DistroRelease: Ubuntu 13.10 Package: alsa-base 1.0.25+dfsg-0ubuntu4 ProcVersionSignature: Ubuntu 3.11.0-4.9-generic 3.11.0-rc7 Uname: Linux 3.11.0-4-generic x86_64 ApportVersion: 2.12.1-0ubuntu3 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: norbs 2189 F pulseaudio Date: Wed Sep 4 09:14:27 2013 InstallationDate: Installed on 2013-08-30 (4 days ago) InstallationMedia: Ubuntu 13.10 "Saucy Salamander" - Alpha amd64 (20130829) MarkForUpload: True PackageArchitecture: all SourcePackage: alsa-driver Symptom: audio Symptom_AlsaPlaybackTest: ALSA playback test through plughw:Generic failed Symptom_Card: Built-in Audio - HD-Audio Generic Symptom_DevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: norbs 2189 F pulseaudio Symptom_Jack: Digital Out, HDMI Symptom_Type: No sound at all Title: [AO725, ATI R6xx HDMI, Digital Out, HDMI] No sound at all UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 04/18/2013 dmi.bios.vendor: Insyde Corp. dmi.bios.version: V1.07 dmi.board.asset.tag: Base Board Asset Tag dmi.board.name: ZA10_BZ dmi.board.vendor: Acer dmi.board.version: Base Board Version dmi.chassis.type: 10 dmi.chassis.vendor: Chassis Manufacturer dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnInsydeCorp.:bvrV1.07:bd04/18/2013:svnAcer:pnAO725:pvrV1.07:rvnAcer:rnZA10_BZ:rvrBaseBoardVersion:cvnChassisManufacturer:ct10:cvrChassisVersion: dmi.product.name: AO725 dmi.product.version: V1.07 dmi.sys.vendor: Acer To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1220553/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://la
[Desktop-packages] [Bug 1218890] Re: eps import fails, graphics filter not found
Launchpad has imported 4 comments from the remote bug at https://bugzilla.novell.com/show_bug.cgi?id=834374. If you reply to an imported comment from within Launchpad, your comment will be sent to the remote bug automatically. Read more about Launchpad's inter-bugtracker facilities at https://help.launchpad.net/InterBugTracking. On 2013-08-11T19:40:52+00:00 Nv4y-robert wrote: User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:22.0) Gecko/20100101 Firefox/22.0 Open LO, open text-document. Insert → Picture → From File Chose a *.eps-picture. Error occurs: Grapic-filter not found. This works with LO 4.1.0.4 from LO-website. There is a package "grapic- filter". This package is not in the repository of OpenSUSE. Reproducible: Always Steps to Reproduce: 1. 2. 3. Reply at: https://bugs.launchpad.net/ubuntu/+source/libreoffice/+bug/1218890/comments/11 On 2013-08-12T01:50:15+00:00 Whdu wrote: I can see the problem. There is also a report from the upstream: https://bugs.freedesktop.org/show_bug.cgi?id=67602 I think we should investigate the package "libreoffice-filters-optional" Reply at: https://bugs.launchpad.net/ubuntu/+source/libreoffice/+bug/1218890/comments/12 On 2013-09-04T09:11:57+00:00 2-pmladek wrote: It seems to be related to the --enable-mergelibs configure switch. It works when I disable it. We want the mergelib because it causes significant startup speedup. We need to fix it to find the EPS import filter also in this case. Reply at: https://bugs.launchpad.net/ubuntu/+source/libreoffice/+bug/1218890/comments/25 On 2013-09-04T09:13:57+00:00 2-pmladek wrote: Let's solve this in upstream bugzilla. Reply at: https://bugs.launchpad.net/ubuntu/+source/libreoffice/+bug/1218890/comments/26 ** Changed in: libreoffice (openSUSE) Status: Unknown => Won't Fix ** Changed in: libreoffice (openSUSE) Importance: Unknown => Medium -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to libreoffice in Ubuntu. https://bugs.launchpad.net/bugs/1218890 Title: eps import fails, graphics filter not found Status in LibreOffice Productivity Suite: Unknown Status in “libreoffice” package in Ubuntu: New Status in “libreoffice” package in Gentoo Linux: New Status in “libreoffice” package in openSUSE: Won't Fix Bug description: This bug showed up since 4.1.0. I just upgraded to 4.1.1, and its still there. $ lsb_release -rd Description:Ubuntu 12.04.3 LTS Release:12.04 $ apt-cache policy libreoffice libreoffice: Installed: 1:4.1.1~rc2-1ubuntu1~precise1~ppa2 Candidate: 1:4.1.1~rc2-1ubuntu1~precise1~ppa2 Version table: *** 1:4.1.1~rc2-1ubuntu1~precise1~ppa2 0 500 http://ppa.launchpad.net/libreoffice/libreoffice-4-1/ubuntu/ precise/main i386 Packages 100 /var/lib/dpkg/status There is also an Upstream Bug: https://bugs.freedesktop.org/show_bug.cgi?id=67602 But this is clearly an Ubuntu Building/Packaging problem, packages from www.libreoffice.org don't show the bug. To manage notifications about this bug go to: https://bugs.launchpad.net/df-libreoffice/+bug/1218890/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1142511] Re: Calendar Authentication requests password in Ubuntu 12.10 and 13.10
ErrrI don't know why I've kept saying 12.10, I'm actually running 13.04! Sorry for any confusion. Regardless, I still have this problem after trying any other solutions I could come up with tonight -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to evolution in Ubuntu. https://bugs.launchpad.net/bugs/1142511 Title: Calendar Authentication requests password in Ubuntu 12.10 and 13.10 Status in “evolution” package in Ubuntu: Confirmed Bug description: I just upgraded from Ubuntu 12.04 to 12.10. After I restarted with the new version of Ubuntu a window shows up very often asking for a password. The title of the window is "Calendar Authentication Request". The text withing the window says something like "Please enter your password for calendar 'nameofcalendar' user:u...@domain.com host:www.google.com". I don't remember having configured my gmail calendar to work offline. Maybe I did, I want this message to stop showing up as it is EXTREMELY ANNOYING. I have uninstall Evolution. I even removed the directory at ~/.local/share/evolution, but the window still shows up. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/evolution/+bug/1142511/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1166577] Re: Musicbrainz plugin for Rhythmbox
** Changed in: rhythmbox (Ubuntu) Importance: Undecided => Wishlist -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to rhythmbox in Ubuntu. https://bugs.launchpad.net/bugs/1166577 Title: Musicbrainz plugin for Rhythmbox Status in “rhythmbox” package in Ubuntu: Confirmed Bug description: Please bundle musicbrainz plugin with rhythmbox. The most common use case is: I would like to populate the ID3 tag information for the song from the musicbrainz database. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/rhythmbox/+bug/1166577/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1221070] Re: jockey-text crashed with AttributeError in /usr/lib/python2.7/dist-packages/jockey/oslib.py: 'module' object has no attribute 'InstallProgress'
*** This bug is a duplicate of bug 1215615 *** https://bugs.launchpad.net/bugs/1215615 Thank you for taking the time to report this crash and helping to make this software better. This particular crash has already been reported and is a duplicate of bug #1215615, so is being marked as such. Please look at the other bug report to see if there is any missing information that you can provide, or to see if there is a workaround for the bug. Additionally, any further discussion regarding the bug should occur in the other report. Please continue to report any other bugs you may find. ** Tags removed: need-duplicate-check ** Changed in: jockey (Ubuntu) Importance: Undecided => Medium ** Attachment removed: "ProcMaps.txt" https://bugs.launchpad.net/bugs/1221070/+attachment/3803528/+files/ProcMaps.txt ** Attachment removed: "ProcStatus.txt" https://bugs.launchpad.net/bugs/1221070/+attachment/3803530/+files/ProcStatus.txt ** This bug has been marked a duplicate of private bug 1215615 ** Information type changed from Private to Public -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to jockey in Ubuntu. https://bugs.launchpad.net/bugs/1221070 Title: jockey-text crashed with AttributeError in /usr/lib/python2.7/dist- packages/jockey/oslib.py: 'module' object has no attribute 'InstallProgress' Status in “jockey” package in Ubuntu: New Bug description: compiz failed to start and this error popped up subsequently ProblemType: Crash DistroRelease: Ubuntu 13.10 Package: jockey-common 0.9.7-0ubuntu13 ProcVersionSignature: Ubuntu 3.11.0-4.9-generic 3.11.0-rc7 Uname: Linux 3.11.0-4-generic x86_64 NonfreeKernelModules: nvidia .var.log.jockey.log: ApportVersion: 2.12.1-0ubuntu3 Architecture: amd64 CrashCounter: 1 Date: Thu Sep 5 10:12:40 2013 ExecutablePath: /usr/bin/jockey-text InstallationDate: Installed on 2012-10-20 (319 days ago) InstallationMedia: Ubuntu 12.04.1 LTS "Precise Pangolin" - Release amd64 (20120823.1) InterpreterPath: /usr/bin/python2.7 MachineType: Hewlett-Packard HP Compaq 8100 Elite CMT PC MarkForUpload: True PackageArchitecture: all ProcCmdline: /usr/bin/python /usr/bin/jockey-text -l ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-4-generic root=UUID=b6bb5205-cb7b-481b-b9d1-48ac47a08b27 ro drm.debug=0xe plymouth:debug PythonArgs: ['/usr/bin/jockey-text', '-l'] SourcePackage: jockey Title: jockey-text crashed with AttributeError in /usr/lib/python2.7/dist-packages/jockey/oslib.py: 'module' object has no attribute 'InstallProgress' UpgradeStatus: Upgraded to saucy on 2013-07-14 (53 days ago) UserGroups: adm lpadmin sambashare sudo dmi.bios.date: 06/09/2010 dmi.bios.vendor: Hewlett-Packard dmi.bios.version: 786H1 v01.05 dmi.board.asset.tag: CZC1102PLN dmi.board.name: 304Bh dmi.board.vendor: Hewlett-Packard dmi.chassis.asset.tag: CZC1102PLN dmi.chassis.type: 6 dmi.chassis.vendor: Hewlett-Packard dmi.modalias: dmi:bvnHewlett-Packard:bvr786H1v01.05:bd06/09/2010:svnHewlett-Packard:pnHPCompaq8100EliteCMTPC:pvr:rvnHewlett-Packard:rn304Bh:rvr:cvnHewlett-Packard:ct6:cvr: dmi.product.name: HP Compaq 8100 Elite CMT PC dmi.sys.vendor: Hewlett-Packard To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/jockey/+bug/1221070/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1220629] Re: xmir_screen_for_each_damaged_window iterates through all outputs on every frame (including unused ones)
Dropping to Low importance. I haven't seen this cause any issues or have any noticeable performance impact. ** Changed in: xmir Importance: Medium => Low ** Changed in: xorg-server (Ubuntu) Importance: Undecided => Low -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xorg-server in Ubuntu. https://bugs.launchpad.net/bugs/1220629 Title: xmir_screen_for_each_damaged_window iterates through all outputs on every frame (including unused ones) Status in XMir: New Status in “xorg-server” package in Ubuntu: New Bug description: xmir_screen_for_each_damaged_window iterates through all outputs (including unused ones), on every frame. I thought it was a bit odd when debugging xmir_screen_for_each_damaged_window that it iterated through 6-8 different xmir_window's. I only have two outputs plugged in. The number actually grew over time (with display config changes?). I think we should avoid iterating (or even creating) unused xmir_windows. In the very least it's inefficient to process all the damage reports more times than necessary. Furthermore, I suspect the unused xmir_windows are accumulating damage that never gets emptied, which is probably bad. To manage notifications about this bug go to: https://bugs.launchpad.net/xmir/+bug/1220629/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1221085] [NEW] missing services in settings
Public bug reported: Hello, add please configuring of services into settings (list, status, enable (auto start), disable, start, stop). Thanks HG ProblemType: Bug DistroRelease: Ubuntu 13.04 Package: gnome-control-center 1:3.6.3-0ubuntu24.1 ProcVersionSignature: Ubuntu 3.8.0-29.21-lowlatency 3.8.13.5 Uname: Linux 3.8.0-29-lowlatency i686 ApportVersion: 2.9.2-0ubuntu8.3 Architecture: i386 Date: Thu Sep 5 10:29:00 2013 EcryptfsInUse: Yes MarkForUpload: True SourcePackage: gnome-control-center UpgradeStatus: Upgraded to raring on 2013-08-11 (24 days ago) usr_lib_gnome-control-center: activity-log-manager-control-center 0.9.4-0ubuntu6.2 deja-dup26.0-0ubuntu1 gnome-control-center-signon 0.1.6bzr13.04.05-0ubuntu1.1 gnome-control-center-unity 1.3daily13.06.19~13.04-0ubuntu1 indicator-datetime 12.10.3daily13.03.26-0ubuntu1 ** Affects: gnome-control-center (Ubuntu) Importance: Undecided Status: New ** Tags: apport-bug i386 raring third-party-packages -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gnome-control-center in Ubuntu. https://bugs.launchpad.net/bugs/1221085 Title: missing services in settings Status in “gnome-control-center” package in Ubuntu: New Bug description: Hello, add please configuring of services into settings (list, status, enable (auto start), disable, start, stop). Thanks HG ProblemType: Bug DistroRelease: Ubuntu 13.04 Package: gnome-control-center 1:3.6.3-0ubuntu24.1 ProcVersionSignature: Ubuntu 3.8.0-29.21-lowlatency 3.8.13.5 Uname: Linux 3.8.0-29-lowlatency i686 ApportVersion: 2.9.2-0ubuntu8.3 Architecture: i386 Date: Thu Sep 5 10:29:00 2013 EcryptfsInUse: Yes MarkForUpload: True SourcePackage: gnome-control-center UpgradeStatus: Upgraded to raring on 2013-08-11 (24 days ago) usr_lib_gnome-control-center: activity-log-manager-control-center 0.9.4-0ubuntu6.2 deja-dup26.0-0ubuntu1 gnome-control-center-signon 0.1.6bzr13.04.05-0ubuntu1.1 gnome-control-center-unity 1.3daily13.06.19~13.04-0ubuntu1 indicator-datetime 12.10.3daily13.03.26-0ubuntu1 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-control-center/+bug/1221085/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1221085] Re: missing services in settings
Thank you for your bug report, what do you call "services", do you mean init jobs (upstart)? ** Changed in: gnome-control-center (Ubuntu) Importance: Undecided => Wishlist ** Changed in: gnome-control-center (Ubuntu) Status: New => Incomplete -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gnome-control-center in Ubuntu. https://bugs.launchpad.net/bugs/1221085 Title: missing services in settings Status in “gnome-control-center” package in Ubuntu: Incomplete Bug description: Hello, add please configuring of services into settings (list, status, enable (auto start), disable, start, stop). Thanks HG ProblemType: Bug DistroRelease: Ubuntu 13.04 Package: gnome-control-center 1:3.6.3-0ubuntu24.1 ProcVersionSignature: Ubuntu 3.8.0-29.21-lowlatency 3.8.13.5 Uname: Linux 3.8.0-29-lowlatency i686 ApportVersion: 2.9.2-0ubuntu8.3 Architecture: i386 Date: Thu Sep 5 10:29:00 2013 EcryptfsInUse: Yes MarkForUpload: True SourcePackage: gnome-control-center UpgradeStatus: Upgraded to raring on 2013-08-11 (24 days ago) usr_lib_gnome-control-center: activity-log-manager-control-center 0.9.4-0ubuntu6.2 deja-dup26.0-0ubuntu1 gnome-control-center-signon 0.1.6bzr13.04.05-0ubuntu1.1 gnome-control-center-unity 1.3daily13.06.19~13.04-0ubuntu1 indicator-datetime 12.10.3daily13.03.26-0ubuntu1 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-control-center/+bug/1221085/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1221090] [NEW] add settings command
Public bug reported: Hello, add command "settings" as synonym to gnome-control-center. cd /usr/loca/bin ln gnome-control-center settings See http://askubuntu.com/questions/116655/what-is-the-command-to-run- system-settings-from-a-terminal ProblemType: Bug DistroRelease: Ubuntu 13.04 Package: gnome-control-center 1:3.6.3-0ubuntu24.1 ProcVersionSignature: Ubuntu 3.8.0-29.21-lowlatency 3.8.13.5 Uname: Linux 3.8.0-29-lowlatency i686 ApportVersion: 2.9.2-0ubuntu8.3 Architecture: i386 Date: Thu Sep 5 10:38:00 2013 EcryptfsInUse: Yes MarkForUpload: True SourcePackage: gnome-control-center UpgradeStatus: Upgraded to raring on 2013-08-11 (24 days ago) usr_lib_gnome-control-center: activity-log-manager-control-center 0.9.4-0ubuntu6.2 deja-dup26.0-0ubuntu1 gnome-control-center-signon 0.1.6bzr13.04.05-0ubuntu1.1 gnome-control-center-unity 1.3daily13.06.19~13.04-0ubuntu1 indicator-datetime 12.10.3daily13.03.26-0ubuntu1 ** Affects: gnome-control-center (Ubuntu) Importance: Undecided Status: New ** Tags: apport-bug i386 raring third-party-packages -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gnome-control-center in Ubuntu. https://bugs.launchpad.net/bugs/1221090 Title: add settings command Status in “gnome-control-center” package in Ubuntu: New Bug description: Hello, add command "settings" as synonym to gnome-control-center. cd /usr/loca/bin ln gnome-control-center settings See http://askubuntu.com/questions/116655/what-is-the-command-to-run- system-settings-from-a-terminal ProblemType: Bug DistroRelease: Ubuntu 13.04 Package: gnome-control-center 1:3.6.3-0ubuntu24.1 ProcVersionSignature: Ubuntu 3.8.0-29.21-lowlatency 3.8.13.5 Uname: Linux 3.8.0-29-lowlatency i686 ApportVersion: 2.9.2-0ubuntu8.3 Architecture: i386 Date: Thu Sep 5 10:38:00 2013 EcryptfsInUse: Yes MarkForUpload: True SourcePackage: gnome-control-center UpgradeStatus: Upgraded to raring on 2013-08-11 (24 days ago) usr_lib_gnome-control-center: activity-log-manager-control-center 0.9.4-0ubuntu6.2 deja-dup26.0-0ubuntu1 gnome-control-center-signon 0.1.6bzr13.04.05-0ubuntu1.1 gnome-control-center-unity 1.3daily13.06.19~13.04-0ubuntu1 indicator-datetime 12.10.3daily13.03.26-0ubuntu1 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-control-center/+bug/1221090/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1204592] Re: LibreOffice unity menus populate sluggishly the first time
** Changed in: libreoffice (Ubuntu) Status: Triaged => In Progress -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to libreoffice in Ubuntu. https://bugs.launchpad.net/bugs/1204592 Title: LibreOffice unity menus populate sluggishly the first time Status in LibreOffice Productivity Suite: Confirmed Status in “libreoffice” package in Ubuntu: In Progress Bug description: As a side effect of the upstreamed fix for bug 1085169 the unity menu takes some time to be populated. This will be observed with LibreOffice 4.1.0 (or older versions that have the fix backported). To manage notifications about this bug go to: https://bugs.launchpad.net/df-libreoffice/+bug/1204592/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 894124] Re: ModemManager fails to connect using F5521gw
** Changed in: modemmanager (Debian) Status: Fix Released => New -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to modemmanager in Ubuntu. https://bugs.launchpad.net/bugs/894124 Title: ModemManager fails to connect using F5521gw Status in ModemManager (with NetworkManager support): New Status in “modemmanager” package in Ubuntu: Confirmed Status in “modemmanager” package in Debian: New Bug description: Using ModemManager and NetworkManager git version both from 2011-11-23. Distribution is Arch Linux. When trying to start a connection to mobile broadband provider Telia (Sweden), a popup message from NetworManager shows "The network connection has been disconnected". Two unkown errors are shown in ModemManager's debug log: modem-manager[25675]: [1322069289.371795] [mm-modem.c:744] mm_modem_set_state(): Modem /org/freedesktop/ModemManager/Modems/0: state changed (disabled -> enabling) modem-manager[25675]: [1322069289.371941] [mm-at-serial-port.c:298] debug_log(): (ttyACM0): --> 'AT&F E0 V1 X4 &C1 +CMEE=1' modem-manager[25675]: [1322069289.397784] [mm-at-serial-port.c:298] debug_log(): (ttyACM0): <-- 'AT&F *EMRDY: 1E0 V1 X4 &C1 +CMEE=1' modem-manager[25675]: [1322069289.398397] [mm-at-serial-port.c:298] debug_log(): (ttyACM0): <-- '' modem-manager[25675]: [1322069289.402565] [mm-at-serial-port.c:298] debug_log(): (ttyACM0): <-- 'OK' modem-manager[25675]: [1322069289.402719] [mm-at-serial-port.c:298] debug_log(): (ttyACM0): --> 'AT*ENAP=0' modem-manager[25675]: [1322069289.417310] [mm-at-serial-port.c:298] debug_log(): (ttyACM0): <-- '+CME ERROR: 276' modem-manager[25675]: Invalid error code: 276 modem-manager[25675]: [1322069289.417490] [mm-serial-parsers.c:410] mm_serial_parser_v1_parse(): Got failure code 100: Unknown error modem-manager[25675]: [1322069289.417675] [mm-at-serial-port.c:298] debug_log(): (ttyACM0): --> 'AT+CFUN=1' modem-manager[25675]: [1322069289.440664] [mm-at-serial-port.c:298] debug_log(): (ttyACM0): <-- '+CME ERROR: 272' modem-manager[25675]: Invalid error code: 272 modem-manager[25675]: [1322069289.440840] [mm-serial-parsers.c:410] mm_serial_parser_v1_parse(): Got failure code 100: Unknown error See attached log for more. I am not sure what info I should provide so please ask if you need more. I will attach log from NetworkManager too. To manage notifications about this bug go to: https://bugs.launchpad.net/modemmanager/+bug/894124/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 28907]
Should be fixed by now. Please reopen if this still doesn't work right. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xkeyboard-config in Ubuntu. https://bugs.launchpad.net/bugs/28907 Title: Dapper 3: Shift cancels CapLock not OK Status in GNOME Control Center: Unknown Status in central project for keyboard configuration: Fix Released Status in “xkeyboard-config” package in Ubuntu: Fix Released Bug description: I've tried: system > preferences > keyboard layout option (3rd tab) Caplock key behaviour (3rd line) tick button: caplock uses internal capitalization. Shift cancels caplock. (2nd line) BUT shift doesn't cancel caplock, sorry To manage notifications about this bug go to: https://bugs.launchpad.net/gnome-control-center/+bug/28907/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 240133]
I think this is a very useful feature. When you save a webpage with a view to read it outline or later, it is more convenient to have a single file. (In reply to Lance Baker from comment #87) > MHTML is not an approved standard. It is a Microsoft idea that other browser > developers have followed. Among the authors of the RFC2557, only one works for Microsoft. Moreover, it is not like if MHTML is a closed file format: the specification is public and part of IETF's work. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to firefox in Ubuntu. https://bugs.launchpad.net/bugs/240133 Title: MHTML Format - Web Archive Files - Standard not supported in Firefox Status in The Mozilla Firefox Browser: Confirmed Status in “firefox” package in Ubuntu: New Status in “firefox-3.0” package in Ubuntu: Won't Fix Status in “firefox-3.5” package in Ubuntu: Triaged Bug description: Binary package hint: firefox-3.0 this location http://www.militarybadges.org.uk/badget11.mht displays This document is a Web archive file. If you are seeing this message, this means your browser or editor doesn't support Web archive files. For more information on the Web archive format, go to http://officeupdate.microsoft.com/office/webarchive.htm I am using ubuntu 8.04 ProblemType: Bug Architecture: i386 Date: Sun Jun 15 10:28:40 2008 DistroRelease: Ubuntu 8.04 NonfreeKernelModules: nvidia Package: firefox-3.0 3.0~rc1+nobinonly-0ubuntu0.8.04.1 PackageArchitecture: i386 ProcEnviron: PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games LANG=en_GB.UTF-8 SHELL=/bin/bash SourcePackage: firefox-3.0 Uname: Linux 2.6.24-18-generic i686 WORKAROUND : http://www.unmht.org/unmht/en_index.html To manage notifications about this bug go to: https://bugs.launchpad.net/firefox/+bug/240133/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 28907] Re: Dapper 3: Shift cancels CapLock not OK
** Changed in: xkeyboard-config Status: In Progress => Fix Released -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xkeyboard-config in Ubuntu. https://bugs.launchpad.net/bugs/28907 Title: Dapper 3: Shift cancels CapLock not OK Status in GNOME Control Center: Unknown Status in central project for keyboard configuration: Fix Released Status in “xkeyboard-config” package in Ubuntu: Fix Released Bug description: I've tried: system > preferences > keyboard layout option (3rd tab) Caplock key behaviour (3rd line) tick button: caplock uses internal capitalization. Shift cancels caplock. (2nd line) BUT shift doesn't cancel caplock, sorry To manage notifications about this bug go to: https://bugs.launchpad.net/gnome-control-center/+bug/28907/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 240133]
(In reply to Lance Baker from comment #87) > MHTML is not an approved standard. It is a Microsoft idea that other browser > developers have followed. Whether Firefox follows the trend or not is a > choice. If they don't, it is not a bug. We already have Zip to archive web > pages and related objects. Using an add-on to do the archive from within > Firefox is a convenience not a bug fix. It's a specification approved as "proposed standard" by the IETF. Just like many other things the internet runs on. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to firefox in Ubuntu. https://bugs.launchpad.net/bugs/240133 Title: MHTML Format - Web Archive Files - Standard not supported in Firefox Status in The Mozilla Firefox Browser: Confirmed Status in “firefox” package in Ubuntu: New Status in “firefox-3.0” package in Ubuntu: Won't Fix Status in “firefox-3.5” package in Ubuntu: Triaged Bug description: Binary package hint: firefox-3.0 this location http://www.militarybadges.org.uk/badget11.mht displays This document is a Web archive file. If you are seeing this message, this means your browser or editor doesn't support Web archive files. For more information on the Web archive format, go to http://officeupdate.microsoft.com/office/webarchive.htm I am using ubuntu 8.04 ProblemType: Bug Architecture: i386 Date: Sun Jun 15 10:28:40 2008 DistroRelease: Ubuntu 8.04 NonfreeKernelModules: nvidia Package: firefox-3.0 3.0~rc1+nobinonly-0ubuntu0.8.04.1 PackageArchitecture: i386 ProcEnviron: PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games LANG=en_GB.UTF-8 SHELL=/bin/bash SourcePackage: firefox-3.0 Uname: Linux 2.6.24-18-generic i686 WORKAROUND : http://www.unmht.org/unmht/en_index.html To manage notifications about this bug go to: https://bugs.launchpad.net/firefox/+bug/240133/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 425621] Re: evolution hangs when opening multiple notes
** Changed in: evolution Status: New => Won't Fix -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to evolution in Ubuntu. https://bugs.launchpad.net/bugs/425621 Title: evolution hangs when opening multiple notes Status in The Evolution Mail & Calendaring Tool: Won't Fix Status in “evolution” package in Ubuntu: Fix Released Bug description: Binary package hint: evolution Evolution hangs when trying to open multiple notes. Steps to reproduce: 1. start evolution 2. go to "notes" (or whatever that is: I have "Notizen") 3. Ensure you have at least two notes inside. 4. Open the first note via double-click 5. close it again 6. try to open the second note: Evolution stops responding Perhaps I should mention: The notes got into evolution vial gpilot synchronization with my palm os. But when adding a new note from evolution, the same problem occurs. Using ubuntu karmic evolution 2.27.91-0ubuntu1 gnome-pilot 2.0.17-0ubuntu2 gnome-pilot-conduits 2.0.15-1.2 apport doesn't report no crash. I don't know how to use gdb. When starting "gdb evolution" (and then "run"), I get these messages after opening and closing the first note: === [New Thread 0xb36f8b70 (LWP 10824)] (evolution:10798): GLib-GObject-WARNING **: cannot register existing type `CompEditor' (evolution:10798): GLib-CRITICAL **: g_once_init_leave: assertion `initialization_value != 0' failed (evolution:10798): calendar-gui-CRITICAL **: e_comp_editor_registry_add: assertion `IS_COMP_EDITOR (editor)' failed [Thread 0xb36f8b70 (LWP 10824) exited] === And those while trying to open the second note: === [Thread 0xb36f8b70 (LWP 10824) exited] [New Thread 0xb36f8b70 (LWP 10826)] [Thread 0xb36f8b70 (LWP 10826) exited] [Thread 0xb4769b70 (LWP 10819) exited] [Thread 0xb4fabb70 (LWP 10810) exited] [Thread 0xb5bfdb70 (LWP 10809) exited] [Thread 0xb63feb70 (LWP 10808) exited] [Thread 0xb755cb70 (LWP 10806) exited] [Thread 0xb7d5db70 (LWP 10805) exited] [Thread 0xb4f6ab70 (LWP 10817) exited] Program terminated with signal SIGKILL, Killed. The program no longer exists. (gdb) bt No stack. === As you can see, I had to terminate evolution after the second attempt. Gnome grayed it out and informed me evolution was not responding any more. I'd love to add any useful information if you request it. ProblemType: Bug Architecture: i386 Date: Mon Sep 7 12:19:52 2009 DistroRelease: Ubuntu 9.10 ExecutablePath: /usr/bin/evolution Package: evolution 2.27.91-0ubuntu1 ProcEnviron: LANG=de_DE.UTF-8 SHELL=/bin/bash ProcVersionSignature: Ubuntu 2.6.31-9.29-generic SourcePackage: evolution Uname: Linux 2.6.31-9-generic i686 To manage notifications about this bug go to: https://bugs.launchpad.net/evolution/+bug/425621/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1220552] Re: App Armor denies access, despite appropriate security policy groups in manifest
** Changed in: libaccounts-glib (Ubuntu Saucy) Status: Triaged => In Progress -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to libaccounts-glib in Ubuntu. https://bugs.launchpad.net/bugs/1220552 Title: App Armor denies access, despite appropriate security policy groups in manifest Status in Online Accounts: libaccounts-glib: Unknown Status in “apparmor-easyprof-ubuntu” package in Ubuntu: Fix Released Status in “libaccounts-glib” package in Ubuntu: In Progress Status in “apparmor-easyprof-ubuntu” source package in Saucy: Fix Released Status in “libaccounts-glib” source package in Saucy: In Progress Bug description: My application does not play audio or have access to Online Accounts when run under app armor on a N4. Everything works fine if I qmlscene the file located in /opt directly. My manifest has networking, audio, and accounts. System Log: Sep 4 07:07:09 ubuntu-phablet kernel: [30790.164043] type=1400 audit(1378278429.378:2806): apparmor="DENIED" operation="open" parent=716 profile="com.wellsb.blackjack-app_blackjack-app_0.0.1" name="/home/phablet/.gstreamer-0.10/registry.arm.bin" pid=24322 comm="qmlscene" requested_mask="r" denied_mask="r" fsuid=32011 ouid=32011 Sep 4 07:07:09 ubuntu-phablet kernel: [30790.164195] type=1400 audit(1378278429.378:2807): apparmor="DENIED" operation="open" parent=716 profile="com.wellsb.blackjack-app_blackjack-app_0.0.1" name="/home/phablet/.gstreamer-0.10/registry.arm.bin" pid=24322 comm="qmlscene" requested_mask="r" denied_mask="r" fsuid=32011 ouid=32011 Sep 4 07:07:10 ubuntu-phablet kernel: [30791.353025] type=1400 audit(1378278430.559:2808): apparmor="DENIED" operation="mknod" parent=716 profile="com.wellsb.blackjack-app_blackjack-app_0.0.1" name="/home/phablet/.gstreamer-0.10/registry.arm.bin.tmpIL852W" pid=24322 comm="qmlscene" requested_mask="c" denied_mask="c" fsuid=32011 ouid=32011 Sep 4 07:07:10 ubuntu-phablet kernel: [30791.353208] type=1400 audit(1378278430.559:2809): apparmor="DENIED" operation="mknod" parent=716 profile="com.wellsb.blackjack-app_blackjack-app_0.0.1" name="/home/phablet/.gstreamer-0.10/registry.arm.bin.tmpC6652W" pid=24322 comm="qmlscene" requested_mask="c" denied_mask="c" fsuid=32011 ouid=32011 Sep 4 07:07:11 ubuntu-phablet kernel: [30791.811075] type=1400 audit(1378278431.009:2810): apparmor="DENIED" operation="open" parent=716 profile="com.wellsb.blackjack-app_blackjack-app_0.0.1" name="/home/phablet/.config/libaccounts-glib/accounts.db" pid=24322 comm="qmlscene" requested_mask="rwc" denied_mask="rwc" fsuid=32011 ouid=32011 Sep 4 07:07:11 ubuntu-phablet kernel: [30791.811136] type=1400 audit(1378278431.009:2811): apparmor="DENIED" operation="open" parent=716 profile="com.wellsb.blackjack-app_blackjack-app_0.0.1" name="/home/phablet/.config/libaccounts-glib/accounts.db" pid=24322 comm="qmlscene" requested_mask="r" denied_mask="r" fsuid=32011 ouid=32011 Sep 4 07:07:11 ubuntu-phablet kernel: [30791.845685] type=1400 audit(1378278431.049:2812): apparmor="DENIED" operation="open" parent=716 profile="com.wellsb.blackjack-app_blackjack-app_0.0.1" name="/run/shm/" pid=24322 comm="qmlscene" requested_mask="r" denied_mask="r" fsuid=32011 ouid=0 Sep 4 07:07:11 ubuntu-phablet kernel: [30791.846387] type=1400 audit(1378278431.049:2813): apparmor="DENIED" operation="open" parent=716 profile="com.wellsb.blackjack-app_blackjack-app_0.0.1" name="/run/shm/" pid=24322 comm="qmlscene" requested_mask="r" denied_mask="r" fsuid=32011 ouid=0 Sep 4 07:07:11 ubuntu-phablet kernel: [30791.847119] type=1400 audit(1378278431.049:2814): apparmor="DENIED" operation="chown" parent=716 profile="com.wellsb.blackjack-app_blackjack-app_0.0.1" name="/run/user/32011/pulse/" pid=24322 comm="qmlscene" requested_mask="w" denied_mask="w" fsuid=32011 ouid=32011 Sep 4 07:07:11 ubuntu-phablet kernel: [30791.847180] type=1400 audit(1378278431.049:2815): apparmor="DENIED" operation="rmdir" parent=716 profile="com.wellsb.blackjack-app_blackjack-app_0.0.1" name="/run/user/32011/pulse/" pid=24322 comm="qmlscene" requested_mask="d" denied_mask="d" fsuid=32011 ouid=32011 To manage notifications about this bug go to: https://bugs.launchpad.net/libaccounts-glib/+bug/1220552/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1218890] Re: eps import fails, graphics filter not found
** Changed in: libreoffice (Ubuntu) Status: New => In Progress -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to libreoffice in Ubuntu. https://bugs.launchpad.net/bugs/1218890 Title: eps import fails, graphics filter not found Status in LibreOffice Productivity Suite: Unknown Status in “libreoffice” package in Ubuntu: In Progress Status in “libreoffice” package in Gentoo Linux: New Status in “libreoffice” package in openSUSE: Won't Fix Bug description: This bug showed up since 4.1.0. I just upgraded to 4.1.1, and its still there. $ lsb_release -rd Description:Ubuntu 12.04.3 LTS Release:12.04 $ apt-cache policy libreoffice libreoffice: Installed: 1:4.1.1~rc2-1ubuntu1~precise1~ppa2 Candidate: 1:4.1.1~rc2-1ubuntu1~precise1~ppa2 Version table: *** 1:4.1.1~rc2-1ubuntu1~precise1~ppa2 0 500 http://ppa.launchpad.net/libreoffice/libreoffice-4-1/ubuntu/ precise/main i386 Packages 100 /var/lib/dpkg/status There is also an Upstream Bug: https://bugs.freedesktop.org/show_bug.cgi?id=67602 But this is clearly an Ubuntu Building/Packaging problem, packages from www.libreoffice.org don't show the bug. To manage notifications about this bug go to: https://bugs.launchpad.net/df-libreoffice/+bug/1218890/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1020048] Re: after certain time printing to cups stops working
After reading comment #41 and compare the precise version of cups with
upstream HEAD, I was able to (re-) build the prceise package with the
following patch:
Index: cups-1.5.3/cups/request.c
===
--- cups-1.5.3.orig/cups/request.c 2011-09-22 00:09:29.0 +0200
+++ cups-1.5.3/cups/request.c 2013-08-27 18:23:35.0 +0200
@@ -643,11 +643,13 @@
}
else if (http->state != HTTP_WAITING)
{
-DEBUG_printf(("1cupsSendRequest: Unknown HTTP state (%d), bailing.",
- http->state));
-_cupsSetError(IPP_INTERNAL_ERROR, strerror(EINVAL), 0);
-
-return (HTTP_ERROR);
+DEBUG_printf(("1cupsSendRequest: Unknown HTTP state (%d), "
+ "reconnecting.", http->state));
+if (httpReconnect(http))
+{
+ _cupsSetError(IPP_INTERNAL_ERROR, strerror(EINVAL), 0);
+ return (HTTP_ERROR);
+}
}
#ifdef HAVE_SSL
@@ -1004,6 +1006,26 @@
httpClose(cg->http);
cg->http = NULL;
}
+else
+{
+ /*
+ * Same server, see if the connection is still established...
+ */
+
+ char ch; /* Connection check byte */
+ int n;
+
+ if ( (n = recv(cg->http->fd, &ch, 1, MSG_PEEK | MSG_DONTWAIT) == 0) ||
+ ( n < 0 && errno != EWOULDBLOCK ) )
+{
+/*
+* Nope, close the connection...
+*/
+
+httpClose(cg->http);
+cg->http = NULL;
+}
+}
}
/*
This solved the reconnect issue for us.
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to libreoffice in Ubuntu.
https://bugs.launchpad.net/bugs/1020048
Title:
after certain time printing to cups stops working
Status in LibreOffice Productivity Suite:
New
Status in “cups” package in Ubuntu:
Incomplete
Status in “libreoffice” package in Ubuntu:
Confirmed
Bug description:
in our institution we are running only printers through a cups server.
while freshly opened document prints well, after some time (few
minutes) clicking "print file directly" and menu item "print" do not
work any more. after close and open again, thing prints correctly. i
have checked what exactly is going on in such cases and logs on the
cups server don't show any submissions and/or errors so that the thing
is obviously stopped at the level of libreoffice.
ProblemType: Bug
DistroRelease: Ubuntu 12.04
Package: libreoffice 1:3.5.3-0ubuntu1
ProcVersionSignature: Ubuntu 3.2.0-26.41-generic 3.2.19
Uname: Linux 3.2.0-26-generic x86_64
No
[Desktop-packages] [Bug 1218890] Re: eps import fails, graphics filter not found
Launchpad has imported 11 comments from the remote bug at https://bugs.freedesktop.org/show_bug.cgi?id=68210. If you reply to an imported comment from within Launchpad, your comment will be sent to the remote bug automatically. Read more about Launchpad's inter-bugtracker facilities at https://help.launchpad.net/InterBugTracking. On 2013-08-17T06:56:15+00:00 thanasis57 wrote: Using Libreoffice Writer 4.1 (directly from ppa:libreoffice/ppa) on Ubuntu 12.04 64bit. I tried opening an existing .odt text file with tiff images imported as links. The imported images would not show. Instead only an empty and flickering frame showed up. Also, I could not import new tiff files, either embedded in the document, or as links. When I tried (Insert --> Picture --> From file) I would get a "Filter not found" message. However, other image formats (I tried png and jpg) could be correctly imported. I downgraded to version 4.0 from ppa:libreoffice/libreoffice-4-0 and now it all works just fine [Version 4.0.4.2 (Build ID: 400m0(Build:2)]. sudo apt-get remove libreoffice* sudo apt-get autoremove sudo add-apt repository sudo add-apt-repository ppa:libreoffice/libreoffice-4-0 sudo apt-get updatesudo apt-get install libreoffice Reply at: https://bugs.launchpad.net/ubuntu/+source/libreoffice/+bug/1218890/comments/16 On 2013-08-17T10:33:56+00:00 Spam35 wrote: Could you please attach an example tiff file which you can't import? Reply at: https://bugs.launchpad.net/ubuntu/+source/libreoffice/+bug/1218890/comments/17 On 2013-08-17T11:09:20+00:00 thanasis57 wrote: Created attachment 84169 Tiff file that could not be imported Reply at: https://bugs.launchpad.net/ubuntu/+source/libreoffice/+bug/1218890/comments/18 On 2013-08-20T12:03:13+00:00 Barta-c wrote: Tiff import of your test file (Insert --> Picture --> From file) works fine on 4.1.0.4 using Win7 64bit. is there any other Linux user who can test? Reply at: https://bugs.launchpad.net/ubuntu/+source/libreoffice/+bug/1218890/comments/19 On 2013-08-23T08:23:09+00:00 Pje335-lo wrote: Thank you for your bug report, I CAN'T reproduce this bug running Version: 4.1.1.2 Build ID: 7e4286b58adc75a14f6d83f53a03b6c11fa2903 on Mac osx 10.8.4. but version: 4.1.0.4 Build ID: 410m0(Build:4) on Linux Mint 15 So it is a Linux only bug & a regression because you said it was working in version 4.0.x. (with I didn't test) Reply at: https://bugs.launchpad.net/ubuntu/+source/libreoffice/+bug/1218890/comments/20 On 2013-08-26T14:44:56+00:00 Mstahl wrote: works for me on self built 4.1.0.4 and 4.0.4.2 and master versions Bjoern, seems reporter is using Ubuntu PPA - perhaps a packaging bug? Reply at: https://bugs.launchpad.net/ubuntu/+source/libreoffice/+bug/1218890/comments/21 On 2013-09-02T19:50:18+00:00 Björn Michaelsen wrote: A quick check with various versions shows: - 4.1 on saucy: "import filter not found" - 4.0 on raring: works - 4.1 on raring: "import filter not found" Reply at: https://bugs.launchpad.net/ubuntu/+source/libreoffice/+bug/1218890/comments/28 On 2013-09-03T10:22:44+00:00 Björn Michaelsen wrote: Debian is not hit by this in 4.0 and 4.1. Digging further, this seems to be an upstream regression with enable-mergedlibs, which Debian is not using, but Ubuntu does in both 4.0 and 4.1. Suspicious commits: 38e95dc334047dfb9a7ae959deda4e4d2f39b3bf eacf12eeb174e35a301570726bf74434a4dd4b94 by Peter Foley, thus CC'ing as I dont know his IRC nick. Also: https://bugs.freedesktop.org/show_bug.cgi?id=67602 likely has the same root cause. Reply at: https://bugs.launchpad.net/ubuntu/+source/libreoffice/+bug/1218890/comments/29 On 2013-09-04T14:52:13+00:00 Libreoffice-commits wrote: Bjoern Michaelsen committed a patch related to this issue. It has been pushed to "master": http://cgit.freedesktop.org/libreoffice/core/commit/?id=dc86610d16a561ff1a0455d5fef157431f9271e3 fdo#68210: Make tiff import work again with merged-libs The patch should be included in the daily builds available at http://dev-builds.libreoffice.org/daily/ in the next 24-48 hours. More information about daily builds can be found at: http://wiki.documentfoundation.org/Testing_Daily_Builds Affected users are encouraged to test the fix and report feedback. Reply at: https://bugs.launchpad.net/ubuntu/+source/libreoffice/+bug/1218890/comments/35 --
[Desktop-packages] [Bug 1094744] Re: MS Sculpt Touch Mouse needs to be re-paired periodically
** Changed in: gnome-bluetooth Status: Incomplete => Fix Released -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gnome-bluetooth in Ubuntu. https://bugs.launchpad.net/bugs/1094744 Title: MS Sculpt Touch Mouse needs to be re-paired periodically Status in GNOME Bluetooth: Fix Released Status in “bluez” package in Ubuntu: Confirmed Status in “gnome-bluetooth” package in Ubuntu: Fix Released Status in “bluez” source package in Precise: New Status in “gnome-bluetooth” source package in Precise: Fix Committed Status in “bluez” source package in Quantal: New Status in “gnome-bluetooth” source package in Quantal: Fix Committed Status in “bluez” source package in Raring: New Status in “gnome-bluetooth” source package in Raring: Fix Committed Status in “bluez” package in Fedora: Unknown Bug description: [Impact] The patch makes Microsoft Wedge/Sculpt Touch mice stay connected. [Test Case] Get a Microsoft Wedge/Sculpt Touch mouse, pair it, restart session, watch it automatically re-pair. [Regression Potential] Little. The patched piece of XML is only relevant to hardware having the same ID. When you don't use the mouse for a long enough time, the mouse disconnects and won't reconnect. I have to go into bluetooth settings, remove it, and re-pair it. 1) ~ % lsb_release -rd Description: Ubuntu 12.04.1 LTS Release: 12.04 2) ~ % apt-cache policy bluez bluez: Installed: 4.98-2ubuntu7 Candidate: 4.98-2ubuntu7 Version table: *** 4.98-2ubuntu7 0 500 http://us.archive.ubuntu.com/ubuntu/ precise/main amd64 Packages 100 /var/lib/dpkg/status 3) I expected the mouse to reconnect automatically, or at least after I try to reconnect manually through the bluetooth settings. 4) I have to re-pair the mouse in order to use it again. Turning the mouse off and on doesn't work either. To manage notifications about this bug go to: https://bugs.launchpad.net/gnome-bluetooth/+bug/1094744/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 776054] Fw:
http://balanzasvosen.com.ar/_0g7u6e3_on.the.advice.of.friends_5w4q0i6_.html
===
Checked: This Link is Safe
Response content SHA-256
z518jg546o84a45m05684y152q406t29g6031k56k3j61509p80lp15t96y5v81r
Anti-Virus Email Ltd.
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to alsa-driver in Ubuntu.
https://bugs.launchpad.net/bugs/776054
Title:
[HDA-Intel - HDA ATI SB, playback] No sound at all
Status in “alsa-driver” package in Ubuntu:
Expired
Status in “alsa-driver” package in Mandriva:
New
Bug description:
when i installed 10.04 sound was fine every thing worked great when i
installed 10.10 and then 11.04 upgrade it stoped working. this laptop
is a toshiba satelite m115 - S1064 actually it may be a kernal modul
problem
ProblemType: Bug
DistroRelease: Ubuntu 11.04
Package: alsa-base 1.0.24+dfsg-0ubuntu1
ProcVersionSignature: Ubuntu 2.6.38-9.43-generic 2.6.38.4
Uname: Linux 2.6.38-9-generic i686
AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.23.
AplayDevices:
List of PLAYBACK Hardware Devices
card 0: SB [HDA ATI SB], device 0: ALC861-VD Analog [ALC861-VD Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
Architecture: i386
ArecordDevices:
List of CAPTURE Hardware Devices
card 0: SB [HDA ATI SB], device 0: ALC861-VD Analog [ALC861-VD Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
AudioDevicesInUse:
USERPID ACCESS COMMAND
/dev/snd/controlC0: samuel 1489 F pulseaudio
Card0.Amixer.info:
Card hw:0 'SB'/'HDA ATI SB at 0xc050 irq 40'
Mixer name : 'Realtek ALC861-VD'
Components : 'HDA:11c11040,11790001,00100200
HDA:10ec0862,11791105,0011'
Controls : 10
Simple ctrls : 6
Date: Mon May 2 20:41:21 2011
InstallationMedia: Ubuntu 10.10 "Maverick Meerkat" - Release i386 (20101007.1)
PackageArchitecture: all
ProcEnviron:
LANGUAGE=en_US:en
LANG=en_US.UTF-8
SHELL=/bin/bash
SourcePackage: alsa-driver
Symptom: audio
Symptom_AlsaPlaybackTest: ALSA playback test through plughw:SB failed
Symptom_Card: Internal Audio - HDA ATI SB
Symptom_DevicesInUse:
1489 1489 F...m pulseaudio
: samuelF pulseaudio
Symptom_Type: No sound at all
Title: [HDA-Intel - HDA ATI SB, playback] No sound at all
UpgradeStatus: Upgraded to natty on 2011-05-02 (0 days ago)
dmi.bios.date: 03/09/2007
dmi.bios.vendor: Phoenix Technologies LTD
dmi.bios.version: 1.20
dmi.board.name: SB450
dmi.board.vendor: ATI
dmi.board.version: Rev0.4b
dmi.chassis.asset.tag: No Asset Tag
dmi.chassis.type: 1
dmi.chassis.vendor: ATI
dmi.chassis.version: N/A
dmi.modalias:
dmi:bvnPhoenixTechnologiesLTD:bvr1.20:bd03/09/2007:svnTOSHIBA:pnSatelliteM115:pvrPSMB6U-00G00C:rvnATI:rnSB450:rvrRev0.4b:cvnATI:ct1:cvrN/A:
dmi.product.name: Satellite M115
dmi.product.version: PSMB6U-00G00C
dmi.sys.vendor: TOSHIBA
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/776054/+subscriptions
--
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1220972] Re: Upgrade rhythmbox to 3.0
Status changed to 'Confirmed' because the bug affects multiple users. ** Changed in: rhythmbox (Ubuntu) Status: New => Confirmed -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to rhythmbox in Ubuntu. https://bugs.launchpad.net/bugs/1220972 Title: Upgrade rhythmbox to 3.0 Status in “rhythmbox” package in Ubuntu: Confirmed Bug description: https://git.gnome.org/browse/rhythmbox/tree/NEWS There's a soname bump but only packages from the rhythmbox source depend on the library. Rhythmbox has been ported to python3 so the following python plugins will need to be ported: rhythmbox-ubuntuone rhythmbox-ampache rhythmbox-radio-browser tunesviewer (?) And python3-mako will need to be promoted to main (python-mako is already in main). There seems to be too much to do for this to be ready for Ubuntu 13.10 but some of the bug fixes should be backported. ProblemType: Bug DistroRelease: Ubuntu 13.10 Package: rhythmbox 2.99.1-0ubuntu1 ProcVersionSignature: Ubuntu 3.11.0-4.9-generic 3.11.0-rc7 Uname: Linux 3.11.0-4-generic x86_64 ApportVersion: 2.12.1-0ubuntu3 Architecture: amd64 Date: Wed Sep 4 20:59:04 2013 MarkForUpload: True SourcePackage: rhythmbox UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/rhythmbox/+bug/1220972/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1216472] Re: [xmir] [multimonitor] Frames eventually get slightly out of order, look like glitches or typing will feel slow
Further notes... The issue seems to occur on frames where some but not
all of the outputs are dirty. So one output makes it through to callback
(sna_xmir_copy_to_mir), but the other does not:
_X_EXPORT void
xmir_screen_for_each_damaged_window(xmir_screen *xmir, xmir_window_proc
callback)
{
xmir_window *xmir_win, *tmp_win;
xorg_list_for_each_entry_safe(xmir_win, tmp_win, &xmir->damage_list,
link_damage) {
if (xmir_window_has_free_buffer(xmir_win) &&
xmir_window_is_dirty(xmir_win))
(*callback)(xmir_win, xmir_window_get_dirty(xmir_win));
}
}
XMir is intentionally designed to only redraw dirty outputs. So not all
get swapped every frame. I wonder however if that is somehow
incompatible with how the intel DDX works?
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xorg-server in Ubuntu.
https://bugs.launchpad.net/bugs/1216472
Title:
[xmir] [multimonitor] Frames eventually get slightly out of order,
look like glitches or typing will feel slow
Status in Mir:
Invalid
Status in XMir:
In Progress
Status in “mir” package in Ubuntu:
Invalid
Status in “xorg-server” package in Ubuntu:
Confirmed
Bug description:
Using ppa:mir-team/qa-testing and ppa:mir-team/qa-testing2, eventually
the frames you see get slightly out of order and slightly lagged.
I've only ever seen this bug in ppa:mir-team/qa-testing and ppa:mir-
team/qa-testing2 so there's a reasonable chance it's come from one of
the branches being tested there, which are not on trunk yet.
The issue seems more pronounced with bypass (qa-testing) but
eventually appears using qa-testing2 as well (no bypass).
It doesn't seem to happen when using a single monitor. Only with
multiple monitors. But possibly haven't tested enough to be sure.
TEST CASE:
Open a terminal in XMir and hold down a key.
Expected: Key appears to repeat smoothly.
Observed: Key sometimes appears to skip one character/frame ahead, and then
back again.
WORKAROUND (1)
1. sudo apt-get install compizconfig-settings-manager
2. ccsm &
3. CCSM > OpenGL > (untick everything except maybe "Sync To VBlank")
WORKAROUND (2)
Use simpler single buffering desktop environment, like Xfce.
WORKAROUND (3)
Unplug all external monitors. Use a single monitor :(
To manage notifications about this bug go to:
https://bugs.launchpad.net/mir/+bug/1216472/+subscriptions
--
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 586499] Re: Making a search in evolution keep search keywords even after reboot
** Changed in: evolution Status: New => Fix Released -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to evolution in Ubuntu. https://bugs.launchpad.net/bugs/586499 Title: Making a search in evolution keep search keywords even after reboot Status in The Evolution Mail & Calendaring Tool: Fix Released Status in “evolution” package in Ubuntu: Triaged Bug description: Binary package hint: evolution When I search a mail in evolution, I enter keywords to filter my search. The problem is that if I don't suppress this words manually, they kept "saved" even if I close evolution or reboot the computer. And next time I open evolution, it shows me only which correspond to my previous search, until I remender I have to suppress the old keywords. This is not a big problem, but I think it can be proposed as a papercut for maverick, because we don't think about search cases when we don't see our mails! ProblemType: Bug DistroRelease: Ubuntu 10.04 Package: evolution 2.28.3-0ubuntu9 ProcVersionSignature: Ubuntu 2.6.32-22.33-generic 2.6.32.11+drm33.2 Uname: Linux 2.6.32-22-generic x86_64 NonfreeKernelModules: fglrx Architecture: amd64 Date: Thu May 27 21:04:14 2010 InstallationMedia: Ubuntu 10.04 LTS "Lucid Lynx" - Release amd64 (20100429) ProcEnviron: LANGUAGE=fr_FR:fr:en LANG=fr_FR.utf8 SHELL=/bin/bash SourcePackage: evolution To manage notifications about this bug go to: https://bugs.launchpad.net/evolution/+bug/586499/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1217799] Re: can't remove an account from the phone
** No longer affects: signon-ui ** Package changed: signon-ui (Ubuntu) => ubuntu-system-settings-online- accounts ** Changed in: ubuntu-system-settings-online-accounts Status: New => Confirmed ** Branch linked: lp:~mikemc/ubuntu-system-settings-online-accounts/fix- remove-account-button -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to signon-ui in Ubuntu. https://bugs.launchpad.net/bugs/1217799 Title: can't remove an account from the phone Status in Online Accounts setup for Ubuntu Touch: Confirmed Status in Ubuntu UX bugs: Fix Committed Status in “ubuntu-system-settings-online-accounts” package in Ubuntu: New Bug description: You have at least one account connected to online accounts. Open online accounts from within System Settings. Select a connected account, and try to remove it. Nothing happens! :) Desired behaviour: account should be removed and you see the online accounts list with your removed account no longer in the 'connected accounts' list. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu-system-settings-online-accounts/+bug/1217799/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1176903] Re: Chromium browser window opens on startup even though I never configured this
There is an option in the Chromium to keep browser running in the background. See Settings -> Advanced settings -> Continue running background apps when Chromium is closed. It seems to be useful for web- apps. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to chromium-browser in Ubuntu. https://bugs.launchpad.net/bugs/1176903 Title: Chromium browser window opens on startup even though I never configured this Status in “chromium-browser” package in Ubuntu: New Bug description: When I start Xubuntu 13.04, a Chromium window opens after I log in to my session. I have never configured Chromium to open a browser window automatically. This happened even back with 12.10, before I upgraded the instance to 13.04. Note that this is not the same as #1175601. With the other bug report, the problem is two background instances of Chromium are running at the same time. With this report, the problem is not the background instances but that the browser window opens without me having configured it to do so. What should happen is, by default, the Chromium browser window does not open until I manually open it. I also have a 13.04 Xubuntu instance that I built from scratch. It also has chromium-browser installed, same version as on the machine with this problem. Not only does it not show a Chromium background process in the menu bar on the top right, running "ps xfwww" does not show any evidence of a Chromium background process running, so I am seeing inconsistent behaviors here. (Not sure if that informs this bug; I'd be happy to open a different bug report if appropriate.) ProblemType: Bug DistroRelease: Ubuntu 13.04 Package: chromium-browser 25.0.1364.160-0ubuntu3 ProcVersionSignature: Ubuntu 3.8.0-19.30-generic 3.8.8 Uname: Linux 3.8.0-19-generic i686 ApportVersion: 2.9.2-0ubuntu8 Architecture: i386 Date: Mon May 6 08:21:23 2013 Desktop-Session: DESKTOP_SESSION = xubuntu XDG_CONFIG_DIRS = /etc/xdg/xdg-xubuntu:/etc/xdg:/etc/xdg XDG_DATA_DIRS = /usr/share/xubuntu:/usr/local/share/:/usr/share/:/usr/share EcryptfsInUse: Yes Env: MOZ_PLUGIN_PATH = None LD_LIBRARY_PATH = None InstallationDate: Installed on 2013-01-02 (123 days ago) InstallationMedia: Xubuntu 12.10 "Quantal Quetzal" - Release i386 (20121017.1) MarkForUpload: True SourcePackage: chromium-browser UpgradeStatus: Upgraded to raring on 2013-04-30 (5 days ago) chromium-default: CHROMIUM_FLAGS="" gconf-keys: /desktop/gnome/applications/browser/exec = b'firefox\n'/desktop/gnome/url-handlers/https/command = b'sensible-browser %s\n'/desktop/gnome/url-handlers/https/enabled = b'true\n'/desktop/gnome/url-handlers/http/command = b'sensible-browser %s\n'/desktop/gnome/url-handlers/http/enabled = b'true\n'/desktop/gnome/session/required_components/windowmanager = b''/apps/metacity/general/compositing_manager = b''/desktop/gnome/interface/icon_theme = b'elementary-xfce-dark\n'/desktop/gnome/interface/gtk_theme = b'Greybird\n' To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/chromium-browser/+bug/1176903/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1176903] Re: Chromium browser window opens on startup even though I never configured this
And I think that this bug and #1175601 all have the same source. Just uncheck that option from #9. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to chromium-browser in Ubuntu. https://bugs.launchpad.net/bugs/1176903 Title: Chromium browser window opens on startup even though I never configured this Status in “chromium-browser” package in Ubuntu: New Bug description: When I start Xubuntu 13.04, a Chromium window opens after I log in to my session. I have never configured Chromium to open a browser window automatically. This happened even back with 12.10, before I upgraded the instance to 13.04. Note that this is not the same as #1175601. With the other bug report, the problem is two background instances of Chromium are running at the same time. With this report, the problem is not the background instances but that the browser window opens without me having configured it to do so. What should happen is, by default, the Chromium browser window does not open until I manually open it. I also have a 13.04 Xubuntu instance that I built from scratch. It also has chromium-browser installed, same version as on the machine with this problem. Not only does it not show a Chromium background process in the menu bar on the top right, running "ps xfwww" does not show any evidence of a Chromium background process running, so I am seeing inconsistent behaviors here. (Not sure if that informs this bug; I'd be happy to open a different bug report if appropriate.) ProblemType: Bug DistroRelease: Ubuntu 13.04 Package: chromium-browser 25.0.1364.160-0ubuntu3 ProcVersionSignature: Ubuntu 3.8.0-19.30-generic 3.8.8 Uname: Linux 3.8.0-19-generic i686 ApportVersion: 2.9.2-0ubuntu8 Architecture: i386 Date: Mon May 6 08:21:23 2013 Desktop-Session: DESKTOP_SESSION = xubuntu XDG_CONFIG_DIRS = /etc/xdg/xdg-xubuntu:/etc/xdg:/etc/xdg XDG_DATA_DIRS = /usr/share/xubuntu:/usr/local/share/:/usr/share/:/usr/share EcryptfsInUse: Yes Env: MOZ_PLUGIN_PATH = None LD_LIBRARY_PATH = None InstallationDate: Installed on 2013-01-02 (123 days ago) InstallationMedia: Xubuntu 12.10 "Quantal Quetzal" - Release i386 (20121017.1) MarkForUpload: True SourcePackage: chromium-browser UpgradeStatus: Upgraded to raring on 2013-04-30 (5 days ago) chromium-default: CHROMIUM_FLAGS="" gconf-keys: /desktop/gnome/applications/browser/exec = b'firefox\n'/desktop/gnome/url-handlers/https/command = b'sensible-browser %s\n'/desktop/gnome/url-handlers/https/enabled = b'true\n'/desktop/gnome/url-handlers/http/command = b'sensible-browser %s\n'/desktop/gnome/url-handlers/http/enabled = b'true\n'/desktop/gnome/session/required_components/windowmanager = b''/apps/metacity/general/compositing_manager = b''/desktop/gnome/interface/icon_theme = b'elementary-xfce-dark\n'/desktop/gnome/interface/gtk_theme = b'Greybird\n' To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/chromium-browser/+bug/1176903/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1175601] Re: Two Chromium background instances and a browser window open on boot without my permission
I think this and #1176903 are the same. There is an option in the Chromium to keep browser running in the background. See Settings -> Advanced settings -> Continue running background apps when Chromium is closed. Just uncheck it. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to chromium-browser in Ubuntu. https://bugs.launchpad.net/bugs/1175601 Title: Two Chromium background instances and a browser window open on boot without my permission Status in “chromium-browser” package in Ubuntu: Expired Bug description: When I log into my user session (type in my password on the login prompt after boot), Chromium auto-starts, and two instances of its background process automatically open: per the attached image, two Chromium icons appear in the top bar. Also, an instance of the browser appears in the middle of the screen. When this happens, I get an inconsistent browsing experince in Chromium, where it is randomly unable to connect to web sites or download components referenced by web pages (e.g., CSS files, JS files, etc.). I can fix by closing the browser and also both the background sessions, then restarting Chromium. I have never configured Chromium to start up when I log into my session. This has happened without my explicit permission or consent. If I go to Session and Startup's Application Autostart tab, Chromium appears in the list and is checked. I did not configure this. Expected behavior: No part of Chromium opens at all, not even a background process, until I launch the browser for the first time. I am using a copy of Xubuntu 13.04 that was upgraded from Xubuntu 12.10. This problem was happening for several weeks back with Xubuntu 12.10, too. ProblemType: Bug DistroRelease: Ubuntu 13.04 Package: chromium-browser 25.0.1364.160-0ubuntu3 ProcVersionSignature: Ubuntu 3.8.0-19.29-generic 3.8.8 Uname: Linux 3.8.0-19-generic i686 ApportVersion: 2.9.2-0ubuntu8 Architecture: i386 Date: Thu May 2 08:18:13 2013 Desktop-Session: DESKTOP_SESSION = xubuntu XDG_CONFIG_DIRS = /etc/xdg/xdg-xubuntu:/etc/xdg:/etc/xdg XDG_DATA_DIRS = /usr/share/xubuntu:/usr/local/share/:/usr/share/:/usr/share EcryptfsInUse: Yes Env: MOZ_PLUGIN_PATH = None LD_LIBRARY_PATH = None InstallationDate: Installed on 2013-01-02 (119 days ago) InstallationMedia: Xubuntu 12.10 "Quantal Quetzal" - Release i386 (20121017.1) MarkForUpload: True SourcePackage: chromium-browser UpgradeStatus: Upgraded to raring on 2013-04-30 (1 days ago) chromium-default: CHROMIUM_FLAGS="" gconf-keys: /desktop/gnome/applications/browser/exec = b'firefox\n'/desktop/gnome/url-handlers/https/command = b'sensible-browser %s\n'/desktop/gnome/url-handlers/https/enabled = b'true\n'/desktop/gnome/url-handlers/http/command = b'sensible-browser %s\n'/desktop/gnome/url-handlers/http/enabled = b'true\n'/desktop/gnome/session/required_components/windowmanager = b''/apps/metacity/general/compositing_manager = b''/desktop/gnome/interface/icon_theme = b'elementary-xfce-dark\n'/desktop/gnome/interface/gtk_theme = b'Greybird\n' To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/chromium-browser/+bug/1175601/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1218504] Re: Installing application from software center sometimes can cause icon not to fly to correct position
This bug was fixed in the package unity - 7.1.0+13.10.20130903.1-0ubuntu1 --- unity (7.1.0+13.10.20130903.1-0ubuntu1) saucy; urgency=low [ Ted Gould ] * Use libupstart for sending Upstart signals. [ Stephen M. Webb ] * moved to zeitgeist-2.0. (LP: #1197569) [ Marco Trevisan (Treviño) ] * ApplicationLauncherIcon: make sure we unstick an icon, update its URI and resave it in order Also improving a lot the SoftwareCenterLauncherIcon code and the install behaviour. (LP: #1218504, #1217849) [ Chris Townsend ] * Fix the code formatting introduced in revno. 3485. [ Ubuntu daily release ] * Automatic snapshot from revision 3488 -- Ubuntu daily releaseTue, 03 Sep 2013 06:37:05 + ** Changed in: unity (Ubuntu) Status: New => Fix Released -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to unity in Ubuntu. Matching subscriptions: dp-unity https://bugs.launchpad.net/bugs/1218504 Title: Installing application from software center sometimes can cause icon not to fly to correct position Status in Unity: Fix Committed Status in “unity” package in Ubuntu: Fix Released Bug description: When installing applications from software center, sometimes the icons are not flying to their final destination correctly, but they're going to the top-left corner and then appearing in the launcher. To manage notifications about this bug go to: https://bugs.launchpad.net/unity/+bug/1218504/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1217849] Re: Applications installed from software center are removed from launcher after installation
This bug was fixed in the package unity - 7.1.0+13.10.20130903.1-0ubuntu1 --- unity (7.1.0+13.10.20130903.1-0ubuntu1) saucy; urgency=low [ Ted Gould ] * Use libupstart for sending Upstart signals. [ Stephen M. Webb ] * moved to zeitgeist-2.0. (LP: #1197569) [ Marco Trevisan (Treviño) ] * ApplicationLauncherIcon: make sure we unstick an icon, update its URI and resave it in order Also improving a lot the SoftwareCenterLauncherIcon code and the install behaviour. (LP: #1218504, #1217849) [ Chris Townsend ] * Fix the code formatting introduced in revno. 3485. [ Ubuntu daily release ] * Automatic snapshot from revision 3488 -- Ubuntu daily releaseTue, 03 Sep 2013 06:37:05 + ** Changed in: unity (Ubuntu) Status: New => Fix Released -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to unity in Ubuntu. Matching subscriptions: dp-unity https://bugs.launchpad.net/bugs/1217849 Title: Applications installed from software center are removed from launcher after installation Status in Unity: Fix Committed Status in “unity” package in Ubuntu: Fix Released Bug description: - Install a desktop application via Software Center - The icon is added to the launcher showing the installation progress Expected behavior: - At the end of the installation the icon is sticked to the launcher Actual behavior: - At the end of the installation the icon is removed from launcher To manage notifications about this bug go to: https://bugs.launchpad.net/unity/+bug/1217849/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1197569] Re: Move from zeitgeist-1.0 to zeitgeist-2.0
This bug was fixed in the package unity - 7.1.0+13.10.20130903.1-0ubuntu1 --- unity (7.1.0+13.10.20130903.1-0ubuntu1) saucy; urgency=low [ Ted Gould ] * Use libupstart for sending Upstart signals. [ Stephen M. Webb ] * moved to zeitgeist-2.0. (LP: #1197569) [ Marco Trevisan (Treviño) ] * ApplicationLauncherIcon: make sure we unstick an icon, update its URI and resave it in order Also improving a lot the SoftwareCenterLauncherIcon code and the install behaviour. (LP: #1218504, #1217849) [ Chris Townsend ] * Fix the code formatting introduced in revno. 3485. [ Ubuntu daily release ] * Automatic snapshot from revision 3488 -- Ubuntu daily releaseTue, 03 Sep 2013 06:37:05 + ** Changed in: unity (Ubuntu) Status: In Progress => Fix Released -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to activity-log-manager in Ubuntu. Matching subscriptions: dp-unity, dp-unity-lens-files, dp-unity-lens-music https://bugs.launchpad.net/bugs/1197569 Title: Move from zeitgeist-1.0 to zeitgeist-2.0 Status in Bijiben: Fix Released Status in Cairo-Dock: Plug-ins: Fix Committed Status in Diodon - GTK+ Clipboard Manager: Triaged Status in Scratch: Confirmed Status in Totem Movie Player: Fix Released Status in Unity: Fix Committed Status in “activity-log-manager” package in Ubuntu: Fix Released Status in “bijiben” package in Ubuntu: New Status in “cairo-dock-plug-ins” package in Ubuntu: Triaged Status in “diodon” package in Ubuntu: Fix Released Status in “folks” package in Ubuntu: New Status in “nautilus” package in Ubuntu: Confirmed Status in “synapse” package in Ubuntu: New Status in “totem” package in Ubuntu: New Status in “unity” package in Ubuntu: Fix Released Status in “unity-lens-applications” package in Ubuntu: New Status in “unity-lens-files” package in Ubuntu: New Status in “unity-lens-video” package in Ubuntu: New Status in “upstart-app-launch” package in Ubuntu: New Bug description: The older libzeitgeist (http://launchpad.net/libzeitgeist) served its days and will be deprecated soon. All the apps should slowly move to libzeitgeist 2 (zeitgeist-2.0) To manage notifications about this bug go to: https://bugs.launchpad.net/bijiben/+bug/1197569/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1220285] Re: Gio.file_new_for_path is not a constructor
This bug was fixed in the package webapps-applications - 2.4.16+13.10.20130904.2-0ubuntu1 --- webapps-applications (2.4.16+13.10.20130904.2-0ubuntu1) saucy; urgency=low [ Víctor R. Ruiz ] * Fix call to Gio.file_new_for_path. (LP: #1220285) [ Ubuntu daily release ] * Automatic snapshot from revision 558 -- Ubuntu daily releaseWed, 04 Sep 2013 16:01:14 + ** Changed in: webapps-applications (Ubuntu) Status: New => Fix Released -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to webapps-applications in Ubuntu. https://bugs.launchpad.net/bugs/1220285 Title: Gio.file_new_for_path is not a constructor Status in Common Data Shared by WebApps: Fix Committed Status in “webapps-applications” package in Ubuntu: Fix Released Bug description: Test case: Fresh Saucy install. - Grab webapps-applications trunk (revno 557). - Build the sources - Go to ./tests/ - Copy site-credentials.example to site-credentials - Execute ./tests-runner.py -t BBCNews.js Expected result: - The script must download BBCNews.js' sources and perform the site test. Actual result: (gjs:19032): Gjs-WARNING **: JS ERROR: TypeError: Gio.file_new_for_path is not a constructor @./test.js:208 JS_EvaluateScript() failed To manage notifications about this bug go to: https://bugs.launchpad.net/webapps-applications/+bug/1220285/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1220795] Re: gvfsd-gphoto2 crashed with SIGSEGV in g_object_unref()
*** This bug is a duplicate of bug 819310 *** https://bugs.launchpad.net/bugs/819310 ** This bug has been marked a duplicate of bug 819310 gvfsd-gphoto2 crashed with SIGSEGV in g_object_unref() ** Attachment removed: "CoreDump.gz" https://bugs.launchpad.net/ubuntu/+source/gvfs/+bug/1220795/+attachment/3802541/+files/CoreDump.gz ** Information type changed from Private to Public -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gvfs in Ubuntu. https://bugs.launchpad.net/bugs/1220795 Title: gvfsd-gphoto2 crashed with SIGSEGV in g_object_unref() Status in “gvfs” package in Ubuntu: New Bug description: Got this error when connected my Nokia C6-00 to transfer photos and wanted to open shotwell. ProblemType: Crash DistroRelease: Ubuntu 13.10 Package: gvfs-backends 1.17.90-0ubuntu1 ProcVersionSignature: Ubuntu 3.11.0-4.9-generic 3.11.0-rc7 Uname: Linux 3.11.0-4-generic x86_64 ApportVersion: 2.12.1-0ubuntu3 Architecture: amd64 Date: Wed Sep 4 17:51:24 2013 ExecutablePath: /usr/lib/gvfs/gvfsd-gphoto2 InstallationDate: Installed on 2012-10-06 (333 days ago) InstallationMedia: Ubuntu 12.10 "Quantal Quetzal" - Beta amd64 (20120926) MarkForUpload: True ProcCmdline: /usr/lib/gvfs/gvfsd-gphoto2 --spawner :1.5 /org/gtk/gvfs/exec_spaw/4 SegvAnalysis: Segfault happened at: 0x7f69f8aa9b84 :cmpq $0x50,(%rax) PC (0x7f69f8aa9b84) ok source "$0x50" ok destination "(%rax)" (0x) not located in a known VMA region (needed writable region)! Stack memory exhausted (SP below stack segment) SegvReason: writing unknown VMA Signal: 11 SourcePackage: gvfs StacktraceTop: g_object_unref () from /usr/lib/x86_64-linux-gnu/libgobject-2.0.so.0 ?? () ?? () g_object_unref () from /usr/lib/x86_64-linux-gnu/libgobject-2.0.so.0 ?? () from /usr/lib/x86_64-linux-gnu/gvfs/libgvfsdaemon.so Title: gvfsd-gphoto2 crashed with SIGSEGV in g_object_unref() UpgradeStatus: Upgraded to saucy on 2013-08-12 (23 days ago) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gvfs/+bug/1220795/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1221176] Re: lightdm crashed with SIGSEGV in __libc_start_main()
*** This bug is a duplicate of bug 1211770 *** https://bugs.launchpad.net/bugs/1211770 Thank you for taking the time to report this crash and helping to make this software better. This particular crash has already been reported and is a duplicate of bug #1211770, so is being marked as such. Please look at the other bug report to see if there is any missing information that you can provide, or to see if there is a workaround for the bug. Additionally, any further discussion regarding the bug should occur in the other report. Please continue to report any other bugs you may find. ** Attachment removed: "CoreDump.gz" https://bugs.launchpad.net/bugs/1221176/+attachment/3803726/+files/CoreDump.gz ** Attachment removed: "Disassembly.txt" https://bugs.launchpad.net/bugs/1221176/+attachment/3803728/+files/Disassembly.txt ** Attachment removed: "ProcMaps.txt" https://bugs.launchpad.net/bugs/1221176/+attachment/3803734/+files/ProcMaps.txt ** Attachment removed: "ProcStatus.txt" https://bugs.launchpad.net/bugs/1221176/+attachment/3803735/+files/ProcStatus.txt ** Attachment removed: "Registers.txt" https://bugs.launchpad.net/bugs/1221176/+attachment/3803736/+files/Registers.txt ** Attachment removed: "Stacktrace.txt" https://bugs.launchpad.net/bugs/1221176/+attachment/3803737/+files/Stacktrace.txt ** Attachment removed: "ThreadStacktrace.txt" https://bugs.launchpad.net/bugs/1221176/+attachment/3803738/+files/ThreadStacktrace.txt ** This bug has been marked a duplicate of private bug 1211770 ** Information type changed from Private to Public ** Tags removed: need-i386-retrace -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to lightdm in Ubuntu. https://bugs.launchpad.net/bugs/1221176 Title: lightdm crashed with SIGSEGV in __libc_start_main() Status in “lightdm” package in Ubuntu: New Bug description: Errors keep coming up whenever the system attempts to play a login sound. ProblemType: Crash DistroRelease: Ubuntu 13.10 Package: lightdm 1.7.12-0ubuntu1 ProcVersionSignature: Ubuntu 3.11.0-4.9-generic 3.11.0-rc7 Uname: Linux 3.11.0-4-generic i686 ApportVersion: 2.12.1-0ubuntu3 Architecture: i386 Date: Thu Sep 5 21:38:05 2013 ExecutablePath: /usr/sbin/lightdm InstallationDate: Installed on 2013-09-05 (0 days ago) InstallationMedia: Lubuntu 13.10 "Saucy Salamander" - Alpha i386 (20130902.1) LightdmConfig: [SeatDefaults] greeter-session=lightdm-gtk-greeter user-session=Lubuntu MarkForUpload: True ProcCmdline: lightdm ProcEnviron: SHELL=/bin/bash TERM=xterm PATH=(custom, no user) LANG=en_AU.UTF-8 LANGUAGE=en_AU:en SegvAnalysis: Segfault happened at: 0x805029e: mov0x4(%edx),%ecx PC (0x0805029e) ok source "0x4(%edx)" (0xaaae) not located in a known VMA region (needed readable region)! destination "%ecx" ok SegvReason: reading unknown VMA Signal: 11 SourcePackage: lightdm StacktraceTop: ?? () ?? () ?? () ?? () __libc_start_main (main=0x804c7b0, argc=1, ubp_av=0xbf975d24, init=0x80687a0, fini=0x8068810, rtld_fini=0xb77d65f0 <_dl_fini>, stack_end=0xbf975d1c) at libc-start.c:260 Title: lightdm crashed with SIGSEGV in __libc_start_main() UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/lightdm/+bug/1221176/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 473589] Re: GEGL Easter Egg in gnome panel is corrupted
** Changed in: gnome-panel (Ubuntu) Status: Confirmed => Fix Released -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gnome-panel in Ubuntu. https://bugs.launchpad.net/bugs/473589 Title: GEGL Easter Egg in gnome panel is corrupted Status in “gnome-panel” package in Ubuntu: Fix Released Bug description: Binary package hint: gnome-panel Gnome panel has an Easter Egg of the animated GEGL (a 5 legged goat). This animation seems to be corrupted on Karmic. To view the bug, right click on an empty region on the gnome panel and select Properties. Then right click 3 times on either of the General or Background tabs. A new GEGL tab appears with an animated 5 legged goat. However, at least one of the animation frames seems to be corrupted. Not really a critical bug, but it would be interesting to know why it's broken and if it can be fixed. Attached is a screen shot of the corruption ProblemType: Bug Architecture: i386 Date: Wed Nov 4 00:38:35 2009 DistroRelease: Ubuntu 9.10 NonfreeKernelModules: wl Package: gnome-panel 1:2.28.0-0ubuntu6 ProcEnviron: LANG=en_US.UTF-8 SHELL=/bin/bash ProcVersionSignature: Ubuntu 2.6.31-14.48-generic SourcePackage: gnome-panel Uname: Linux 2.6.31-14-generic i686 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-panel/+bug/473589/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 293848] Re: evolution configured with imap doesn't download all gmail emails in their appropriate folder (label)
** Changed in: evolution Status: New => Incomplete -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to evolution in Ubuntu. https://bugs.launchpad.net/bugs/293848 Title: evolution configured with imap doesn't download all gmail emails in their appropriate folder (label) Status in The Evolution Mail & Calendaring Tool: Incomplete Status in “evolution” package in Ubuntu: Triaged Bug description: I realize, after about 6 months of utilization of evolution (version 2.22.3.1 in Hardy Heron x86_64) configured with imap to download/syncronize my gmail account that many emails (correctly labeled and archived via google webmail) aren't downloaded in the appropriate evolution folder (that corresponds to gmail label), but they are only in "All Mail" folder (they should be either in the appropriate folder/label or in "all mail" folder). This is the first issue. If I connect to gmail webmail I see the everything is ok. Now, from evolution, if I try to move the emails that are only in "All Mail" (but in gmail webmail they are correctly labeled) to the right folder (to correct the issue) the email is moved to this folder (this is the second issue as the email shouldn't be never moved from All Mail if not deleted or trashed). This problem also remains if I resend/receive emails from evolution (I expexted to see again the previously moved/labeled email in All Mail, but with no success). To manage notifications about this bug go to: https://bugs.launchpad.net/evolution/+bug/293848/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1201128] Re: .directory files contain references to inappropriate icons
On further investigation it looks like this bug got picked up from Debian by Sebastien Bacher on 2008-06-13. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gnome-menus in Ubuntu. https://bugs.launchpad.net/bugs/1201128 Title: .directory files contain references to inappropriate icons Status in “gnome-menus” package in Ubuntu: New Bug description: Directory files have been shipped with incorrect Icon= fields. For example, ActionGames.directory contains Icon=weather-storm. This should instead read Icons=applications-action (1) which is included in many icon sets (2), leaving this kind of substitution to the theme author using symlinks. Including references to these substitutions directly in the .directory files is an inappropriate and unecessary kludge which breaks themes, including the default one. I've only checked the Games .directory files so far, since that is what I was doing when I encountered the bug, but they all exhibit this problem. I'm using Ubuntu 13.04, but it's the kind of thing that could have been sitting undone for a while. It's probably worth checking whether this bug exists upstream or whether it's been introduced by the Ubuntu team. Upon further checking, Bug #421294 is a particular case of this bug, where the line reads Icon=system-run rather than Icon=applications- puzzles. From this report and Bug #421695 it seems likely that this bug was introduced in Karmic. (1) or similar - I'm not entirely sure on whether this will shake out as applications-action or applications-games-action; Gnome currently goes one way and KDE the other but, either way, symlinks are cheap and it can be sorted out through freedesktop. (2) Ubuntu's own Humanity icon set includes icons of this form, but they are not used because of this bug. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-menus/+bug/1201128/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 801229] Re: xorg GPU freezing
Thank you for reporting this bug to Ubuntu. RELEASE reached EOL on DATE. See this document for currently supported Ubuntu releases: https://wiki.ubuntu.com/Releases Do feel free to report any other bugs you may find. ** Changed in: xorg-server (Ubuntu) Status: New => Invalid -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xorg-server in Ubuntu. https://bugs.launchpad.net/bugs/801229 Title: xorg GPU freezing Status in “xorg-server” package in Ubuntu: Invalid Bug description: Using ubuntu 10.10, intel i7 quad core, Radeon HD 3450. Xorg freezes pretty regularly. Keyboard and mouse completely stop responding. The screen gets corrupted with weird color patterns (I'll attach a screenshot). Xorg uses 100% CPU. Only a kill -9 will kill the process. I can't remember when it started. First it would do it once a week or so. Then it got gradually more frequent. Now it does it several times a day. I have noticed it to be more frequent when I'm using Wine or Crossover Wine, but this particular time I didn't have Wine open. I was using Chrome, Remmina, Terminal, and File Browser. Most recently I disabled the desktop effects (I guess that disables compiz) thinking the problem would go away, but it hasn't. The only thing I can do with the system at this point is a hard power off. ProblemType: Bug DistroRelease: Ubuntu 10.10 Package: xserver-xorg-core 2:1.9.0-0ubuntu7.3 ProcVersionSignature: Ubuntu 2.6.35-28.50-generic 2.6.35.11 Uname: Linux 2.6.35-28-generic x86_64 NonfreeKernelModules: fglrx Architecture: amd64 Date: Thu Jun 23 10:53:49 2011 DkmsStatus: fglrx, 8.780, 2.6.35-28-generic, x86_64: installed ExecutablePath: /usr/bin/Xorg InstallationMedia: Ubuntu 10.10 "Maverick Meerkat" - Release amd64 (20101007) MachineType: Dell Inc. OptiPlex 980 ProcCmdLine: BOOT_IMAGE=/vmlinuz-2.6.35-28-generic root=UUID=491450e8-ace7-4b43-8d05-01aa39a6aa6f ro quiet splash ProcEnviron: LANG=en_US.UTF-8 PATH=(custom, no user) SourcePackage: xorg-server dmi.bios.date: 02/16/2010 dmi.bios.vendor: Dell Inc. dmi.bios.version: A01 dmi.board.name: 0D441T dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 6 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvrA01:bd02/16/2010:svnDellInc.:pnOptiPlex980:pvr:rvnDellInc.:rn0D441T:rvrA00:cvnDellInc.:ct6:cvr: dmi.product.name: OptiPlex 980 dmi.sys.vendor: Dell Inc. system: distro: Ubuntu codename: maverick architecture: x86_64 kernel: 2.6.35-28-generic To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xorg-server/+bug/801229/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1068404] Re: Low graphics mode in muxless hybrid ATI/Intel GPU systems after fglrx upgrade
Filing on AMD's bug tracker is the right thing to do, if you want you can also file here on Launchpad (try using Apport/ubuntu-bug). -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to fglrx-installer in Ubuntu. https://bugs.launchpad.net/bugs/1068404 Title: Low graphics mode in muxless hybrid ATI/Intel GPU systems after fglrx upgrade Status in X.org xf86-video-intel: Won't Fix Status in “fglrx-installer” package in Ubuntu: In Progress Status in “fglrx-installer-updates” package in Ubuntu: Triaged Status in “fglrx-installer” source package in Quantal: Confirmed Status in “fglrx-installer-updates” source package in Quantal: Triaged Status in “xserver-xorg-video-intel” package in openSUSE: In Progress Bug description: [Impact] * Hybrid systems with ATI/intel GPUs using fglrx get a segmentation fault in X when using 12.10. In stock 12.04.1 these systems were working fine. * This bug represents a severe regression from precise to quantal, since is crashing on startup * The proposed patch updates the driver to version 13.2beta3 of upstream which seems to resolve this issue [Test Case] * Get an hybrid ATI/intel system. Install quantal: The system should boot fine Install the proprietary fglrx package and reboot: The X server crashes on startup [Regression Potential] * This solution does not need any change on the intel driver (as a previous workaround needed). * No regressions have been reported so far using this most recent fglrx upstream, by the people affected by this bug == After installing the latest fglrx-updates package on Ubuntu 12.10 (fglrx-updates_9.000-0ubuntu3_amd64) I have the same issue that was present before AMD fixed switchable graphics on PowerXpress 4.0 cards (such as my HD 6470M coupled with the intel HD Graphics 3000 of my intel Core i5-2430M). The X server has a segmentation fault and the low graphics mode is activated. WORKAROUND: fglrx-installer-13 2:13.101~beta-0ubuntu1~xedgers~quantal1 from: https://launchpad.net/~xorg-edgers/+archive/ppa?field.series_filter=quantal WORKAROUND: Follow carefully the instructions here: https://help.ubuntu.com/community/BinaryDriverHowto/ATI#WORKAROUND As per Nick Andrik, this is a version regression of xserver-xorg- video-intel from 2.20.2 (working and in below mentioned PPA) and 2.20.3. The regression commit is http://cgit.freedesktop.org/xorg/driver/xf86-video- intel/commit/?id=05dcc5f1699ba90fc14c50882e8d4be89bc4a4f9 . Upstream fglrx has published a new version (> 13.1 ) of the driver which seems to solve this issue. No need to revert the commit in the Intel driver any more. ATTENTION: 1. If you choose the integrated GPU (via Catalyst or via amdconfig --px-igpu) and your X server crashes on startup, then your are probably affected by this bug: https://bugs.launchpad.net/ubuntu/+source/fglrx-installer/+bug/1088220 2. If your system includes an old ATI GPU card (Radeon HD 2x00 3x00 4x00) which is not supported any more by fglrx drivers, then probably you suffer from this bug: https://bugs.launchpad.net/ubuntu/+source/fglrx-installer/+bug/1058040 Subscribe and comment there please. If the X server loads (so you see no low graphics mode window) but you get no menu bars, window decorations, etc, then press Ctrl+Shift+T to open a terminal, write in there: unity --replace & and post a comment with the result. The logs from the intial bug report follow: Here is the Xorg log: [20.924] X.Org X Server 1.13.0 Release Date: 2012-09-05 [20.924] X Protocol Version 11, Revision 0 [20.924] Build Operating System: Linux 3.2.0-30-generic x86_64 Ubuntu [20.924] Current Operating System: Linux marco-HP-Pavilion-g6-Notebook-PC 3.5.0-17-generic #28-Ubuntu SMP Tue Oct 9 19:31:23 UTC 2012 x86_64 [20.924] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.5.0-17-generic root=UUID=5374f779-2ae8-4842-a390-e21317364c6c ro quiet splash vt.handoff=7 [20.924] Build Date: 08 October 2012 03:34:01PM [20.924] xorg-server 2:1.13.0-0ubuntu6 (For technical support please see http://www.ubuntu.com/support) [20.924] Current version of pixman: 0.26.0 [20.924] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [20.924] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [20.924] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Oct 19 02:42:21 2012 [20.924] (==) Using config file: "/etc/X11/xorg.conf" [20.924] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [20.924] (==) ServerLayout "aticonfig Layout" [20.924] (**) |-->Screen "aticonfig-Screen[0]-0" (0) [20.924] (**) | |-->Monitor "a
[Desktop-packages] [Bug 1066245] Re: Graphics some times runs very slow
** Changed in: xserver-xorg-video-nouveau (Ubuntu) Status: New => Invalid -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xserver-xorg-video-nouveau in Ubuntu. https://bugs.launchpad.net/bugs/1066245 Title: Graphics some times runs very slow Status in “xserver-xorg-video-nouveau” package in Ubuntu: Invalid Bug description: Hi, recently I noticed that the graphical performances of ubuntu have degraded in certain use cases. I play quite often with the game hedgewars and I never had troubles in running it full screen. Since few weeks ago, if I play the game full screen now it runs very sluggishly. This behavior appeared after some package upgrade happened around 1 month ago, I think. If I play the game in windowed mode, it plays fine. ProblemType: Bug DistroRelease: Ubuntu 12.04 Package: xorg 1:7.6+12ubuntu1 ProcVersionSignature: Ubuntu 3.2.0-31.50-generic 3.2.28 Uname: Linux 3.2.0-31-generic x86_64 NonfreeKernelModules: nvidia .proc.driver.nvidia.gpus.0: Error: [Errno 21] È una directory: '/proc/driver/nvidia/gpus/0' .proc.driver.nvidia.registry: Binary: "" .proc.driver.nvidia.version: NVRM version: NVIDIA UNIX x86_64 Kernel Module 295.49 Mon Apr 30 23:46:33 PDT 2012 GCC version: gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) .tmp.unity.support.test.0: ApportVersion: 2.0.1-0ubuntu13 Architecture: amd64 CompizPlugins: [core,composite,opengl,compiztoolbox,decor,vpswitch,snap,mousepoll,resize,place,move,wall,grid,regex,imgpng,session,gnomecompat,animation,fade,unitymtgrabhandles,workarounds,scale,expo,ezoom,unityshell] CompositorRunning: compiz Date: Sat Oct 13 11:05:30 2012 DistUpgraded: 2012-09-30 21:40:16,556 DEBUG enabling apt cron job DistroCodename: precise DistroVariant: ubuntu DkmsStatus: nvidia-current-updates, 295.49, 3.2.0-31-generic, x86_64: installed nvidia-current-updates, 295.49, 3.2.0-32-generic, x86_64: installed vboxhost, 4.2.0, 3.2.0-31-generic, x86_64: installed vboxhost, 4.2.0, 3.2.0-32-generic, x86_64: installed EcryptfsInUse: Yes ExtraDebuggingInterest: Yes, even including gdb or git bisection work if needed GraphicsCard: NVIDIA Corporation GF119 [Quadro NVS 4200M] [10de:1056] (rev a1) (prog-if 00 [VGA controller]) Subsystem: Dell Device [1028:0494] InstallationMedia: Ubuntu 11.10 "Oneiric Ocelot" - Release amd64 (20111012) JockeyStatus: xorg:nvidia_current - Driver grafici accelerati NVIDIA (Proprietario, Disabilitato, Non in uso) xorg:nvidia_current_updates - Driver grafici accelerati NVIDIA (aggiornamenti post-release) (Proprietario, Abilitato, In uso) MachineType: Dell Inc. Latitude E6520 ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.2.0-31-generic root=UUID=6b4a3078-1496-436d-b60f-5dd079920411 ro quiet splash vt.handoff=7 SourcePackage: xorg Symptom: display UpgradeStatus: Upgraded to precise on 2012-09-30 (12 days ago) XorgConf: Section "Device" Identifier "Default Device" Option "NoLogo""True" EndSection dmi.bios.date: 09/15/2011 dmi.bios.vendor: Dell Inc. dmi.bios.version: A07 dmi.board.name: 0J4TFW dmi.board.vendor: Dell Inc. dmi.board.version: A01 dmi.chassis.type: 9 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvrA07:bd09/15/2011:svnDellInc.:pnLatitudeE6520:pvr01:rvnDellInc.:rn0J4TFW:rvrA01:cvnDellInc.:ct9:cvr: dmi.product.name: Latitude E6520 dmi.product.version: 01 dmi.sys.vendor: Dell Inc. version.compiz: compiz 1:0.9.7.8-0ubuntu1.4 version.ia32-libs: ia32-libs 20090808ubuntu36 version.libdrm2: libdrm2 2.4.32-1ubuntu1 version.libgl1-mesa-dri: libgl1-mesa-dri 8.0.3+8.0.2-0ubuntu3.2 version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 8.0.3+8.0.2-0ubuntu3.2 version.nvidia-graphics-drivers: nvidia-graphics-drivers N/A version.xserver-xorg-core: xserver-xorg-core 2:1.11.4-0ubuntu10.8 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.7.0-0ubuntu1.2 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:6.14.99~git20111219.aacbd629-0ubuntu2 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.17.0-1ubuntu4.1 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:0.0.16+git20111201+b5534a1-1build2 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-video-nouveau/+bug/1066245/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 921321] Re: nouveau: dark screen after suspend/resume
This bug report is being closed due to your last comment: "although I am unable to test anymore as my laptop has been replaced" For future reference you can manage the status of your own bugs by clicking on the current status in the yellow line and then choosing a new status in the revealed drop down box. You can learn more about bug statuses at https://wiki.ubuntu.com/Bugs/Status. Thank you again for taking the time to report this bug and helping to make Ubuntu better. Please submit any future bugs you may find. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xserver-xorg-video-nouveau in Ubuntu. https://bugs.launchpad.net/bugs/921321 Title: nouveau: dark screen after suspend/resume Status in Accelerated Xorg driver for nVidia cards: Incomplete Status in “xserver-xorg-video-nouveau” package in Ubuntu: Invalid Bug description: Nouveau works fine with brightness controls working fine after initial boot, but I do S3 suspend, and then resume via power button, and brightness controls don't work at all, and backlight is on, but set at extremely low level. hardware is Quadro 770M on HP 8530w laptop /sys/.../brightness control does nothing when in this state, suspend resume cycles after this first cycle all have the same problem. I'll test if a full hibernate has the issue or not after this and report back. ProblemType: Bug DistroRelease: Ubuntu 11.10 Package: xorg 1:7.6+7ubuntu7 Uname: Linux 3.3.0-rc1+ x86_64 .tmp.unity.support.test.1: ApportVersion: 1.23-0ubuntu4 Architecture: amd64 CompizPlugins: [core,bailer,detection,composite,opengl,decor,move,compiztoolbox,grid,vpswitch,gnomecompat,place,session,snap,mousepoll,regex,resize,imgpng,unitymtgrabhandles,wall,animation,workarounds,expo,fade,ezoom,scale,unityshell] CompositorRunning: None Date: Tue Jan 24 15:57:58 2012 DistUpgraded: Log time: 2011-10-20 21:20:49.957387 DistroCodename: oneiric DistroVariant: ubuntu EcryptfsInUse: Yes ExtraDebuggingInterest: Yes, whatever it takes to get this fixed in Ubuntu GraphicsCard: nVidia Corporation G96M [Quadro FX 770M] [10de:065c] (rev a1) (prog-if 00 [VGA controller]) Subsystem: Hewlett-Packard Company Device [103c:30e7] InstallationMedia: Ubuntu 11.04 "Natty Narwhal" - Release amd64 (20110427.1) MachineType: Hewlett-Packard HP EliteBook 8530w PccardctlIdent: Socket 0: product info: "RICOH", "Bay8Controller", "", "" manfid: 0x, 0x function: 254 (unknown) PccardctlStatus: Socket 0: 3.3V 16-bit PC Card Subdevice 0 (function 0) bound to driver "pata_pcmcia" ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.3.0-rc1+ root=UUID=824346e6-fd2f-4916-a2c9-e883c1fe860c ro splash quiet vga=771 crashkernel=384M-2G:64M,2G-:128M quiet splash vt.handoff=7 SourcePackage: xorg Symptom: display UpgradeStatus: Upgraded to oneiric on 2011-10-21 (95 days ago) Xrandr: Screen 0: minimum 0 x 0, current 3200 x 1200, maximum 4096 x 4096 dmi.bios.date: 12/13/2010 dmi.bios.vendor: Hewlett-Packard dmi.bios.version: 68PDV Ver. F.13 dmi.board.name: 30E7 dmi.board.vendor: Hewlett-Packard dmi.board.version: KBC Version 90.27 dmi.chassis.type: 10 dmi.chassis.vendor: Hewlett-Packard dmi.modalias: dmi:bvnHewlett-Packard:bvr68PDVVer.F.13:bd12/13/2010:svnHewlett-Packard:pnHPEliteBook8530w:pvrF.13:rvnHewlett-Packard:rn30E7:rvrKBCVersion90.27:cvnHewlett-Packard:ct10:cvr: dmi.product.name: HP EliteBook 8530w dmi.product.version: F.13 dmi.sys.vendor: Hewlett-Packard version.compiz: compiz 1:0.9.6+bzr20110929-0ubuntu6 version.ia32-libs: ia32-libs 20090808ubuntu26 version.libdrm2: libdrm2 2.4.26-1ubuntu1 version.libgl1-mesa-dri: libgl1-mesa-dri 7.11-0ubuntu3 version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 7.11-0ubuntu3 version.xserver-xorg: xserver-xorg 1:7.6+7ubuntu7 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.6.0-1ubuntu13 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:6.14.99~git20110811.g93fc084-0ubuntu1 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.15.901-1ubuntu2.1 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:0.0.16+git20110411+8378443-1 To manage notifications about this bug go to: https://bugs.launchpad.net/nouveau/+bug/921321/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 921321] Re: nouveau: dark screen after suspend/resume
Thank you for taking the time to report this bug and helping to make Ubuntu better. Please execute the following command, as it will automatically gather debugging information, in a terminal: $ apport-collect BUGNUMBER When reporting bugs in the future please use apport by using 'ubuntu- bug' and the name of the package affected. You can learn more about this functionality at https://wiki.ubuntu.com/ReportingBugs. ** Changed in: xserver-xorg-video-nouveau (Ubuntu) Status: Confirmed => Invalid -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xserver-xorg-video-nouveau in Ubuntu. https://bugs.launchpad.net/bugs/921321 Title: nouveau: dark screen after suspend/resume Status in Accelerated Xorg driver for nVidia cards: Incomplete Status in “xserver-xorg-video-nouveau” package in Ubuntu: Invalid Bug description: Nouveau works fine with brightness controls working fine after initial boot, but I do S3 suspend, and then resume via power button, and brightness controls don't work at all, and backlight is on, but set at extremely low level. hardware is Quadro 770M on HP 8530w laptop /sys/.../brightness control does nothing when in this state, suspend resume cycles after this first cycle all have the same problem. I'll test if a full hibernate has the issue or not after this and report back. ProblemType: Bug DistroRelease: Ubuntu 11.10 Package: xorg 1:7.6+7ubuntu7 Uname: Linux 3.3.0-rc1+ x86_64 .tmp.unity.support.test.1: ApportVersion: 1.23-0ubuntu4 Architecture: amd64 CompizPlugins: [core,bailer,detection,composite,opengl,decor,move,compiztoolbox,grid,vpswitch,gnomecompat,place,session,snap,mousepoll,regex,resize,imgpng,unitymtgrabhandles,wall,animation,workarounds,expo,fade,ezoom,scale,unityshell] CompositorRunning: None Date: Tue Jan 24 15:57:58 2012 DistUpgraded: Log time: 2011-10-20 21:20:49.957387 DistroCodename: oneiric DistroVariant: ubuntu EcryptfsInUse: Yes ExtraDebuggingInterest: Yes, whatever it takes to get this fixed in Ubuntu GraphicsCard: nVidia Corporation G96M [Quadro FX 770M] [10de:065c] (rev a1) (prog-if 00 [VGA controller]) Subsystem: Hewlett-Packard Company Device [103c:30e7] InstallationMedia: Ubuntu 11.04 "Natty Narwhal" - Release amd64 (20110427.1) MachineType: Hewlett-Packard HP EliteBook 8530w PccardctlIdent: Socket 0: product info: "RICOH", "Bay8Controller", "", "" manfid: 0x, 0x function: 254 (unknown) PccardctlStatus: Socket 0: 3.3V 16-bit PC Card Subdevice 0 (function 0) bound to driver "pata_pcmcia" ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.3.0-rc1+ root=UUID=824346e6-fd2f-4916-a2c9-e883c1fe860c ro splash quiet vga=771 crashkernel=384M-2G:64M,2G-:128M quiet splash vt.handoff=7 SourcePackage: xorg Symptom: display UpgradeStatus: Upgraded to oneiric on 2011-10-21 (95 days ago) Xrandr: Screen 0: minimum 0 x 0, current 3200 x 1200, maximum 4096 x 4096 dmi.bios.date: 12/13/2010 dmi.bios.vendor: Hewlett-Packard dmi.bios.version: 68PDV Ver. F.13 dmi.board.name: 30E7 dmi.board.vendor: Hewlett-Packard dmi.board.version: KBC Version 90.27 dmi.chassis.type: 10 dmi.chassis.vendor: Hewlett-Packard dmi.modalias: dmi:bvnHewlett-Packard:bvr68PDVVer.F.13:bd12/13/2010:svnHewlett-Packard:pnHPEliteBook8530w:pvrF.13:rvnHewlett-Packard:rn30E7:rvrKBCVersion90.27:cvnHewlett-Packard:ct10:cvr: dmi.product.name: HP EliteBook 8530w dmi.product.version: F.13 dmi.sys.vendor: Hewlett-Packard version.compiz: compiz 1:0.9.6+bzr20110929-0ubuntu6 version.ia32-libs: ia32-libs 20090808ubuntu26 version.libdrm2: libdrm2 2.4.26-1ubuntu1 version.libgl1-mesa-dri: libgl1-mesa-dri 7.11-0ubuntu3 version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 7.11-0ubuntu3 version.xserver-xorg: xserver-xorg 1:7.6+7ubuntu7 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.6.0-1ubuntu13 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:6.14.99~git20110811.g93fc084-0ubuntu1 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.15.901-1ubuntu2.1 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:0.0.16+git20110411+8378443-1 To manage notifications about this bug go to: https://bugs.launchpad.net/nouveau/+bug/921321/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 800136] Re: Redesign display settings panel under unity
** Changed in: gnome-control-center Status: Confirmed => Fix Released -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gnome-control-center in Ubuntu. https://bugs.launchpad.net/bugs/800136 Title: Redesign display settings panel under unity Status in Ayatana Design: Fix Committed Status in GNOME Control Center: Fix Released Status in “gnome-control-center” package in Ubuntu: Triaged Bug description: Binary package hint: gnome-control-center in the display manager gnome-control-center, it has a thumbnail image displays. of these miniatures, we have a mini panel. Can we choose the primary display with drag and drop this mini panel ... The Bug Is That Is The mini panel gnome-shell one ... Would it be nice and more clear If You Can replace it with a little Unity or Something Like That. I joined capture;) [Next Action] * [Design] feedback about help label * [andyrock] Link to branch/patch/code * Code review of andyrock's proposed changes Desired Solution: - Implement the new design for 'Display settings' as detailed in section 2.4 of the 'Gnome 3 System Settings changes' specification https://docs.google.com/a/canonical.com/document/d/1ILTJDiDCd25Npt2AmgzF8aOnZZECxTfM0hvsbWT2BxA/edit?hl=en_GB - Note the concept of primary monitor is now removed, and that with a Launcher on every monitor there is no need to select on which monitor the Launcher should be displayed. See http://design.canonical.com /the-toolkit/unity-multi-monitor-interactions/ To manage notifications about this bug go to: https://bugs.launchpad.net/ayatana-design/+bug/800136/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1211920] Re: Low audio output on Vostro 5460 (with Ubuntu pre-loaded)
~$ alsa-info.sh alsa-info.sh: command not found I have no idea why but I guess i do not have this ppa. anyway, here's what i have amended: Pin ID: 0x17 Connectivity: internal Location: Rear Device: Speaker Jack: Unknown Color: Black Jack detection: Not present Channel group: 1 Channel (in group) : Front I hope this helps as this certainly transformed my sound experience. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to alsa-driver in Ubuntu. https://bugs.launchpad.net/bugs/1211920 Title: Low audio output on Vostro 5460 (with Ubuntu pre-loaded) Status in “alsa-driver” package in Ubuntu: Incomplete Bug description: I have been using a Dell Vostro 5460 for a while. It came pre-loaded with Ubuntu 12.04. Also, I could find some customizations in the same. And there's an issue of low audio output that I am facing. I have been using the 12.10 and 13.04 versions currently and the issue affects them too. Also, reportedly Windows users are facing no such issues. Some discussion regarding the same can be found at: http://ubuntuforums.org/showthread.php?t=2152776 http://ubuntuforums.org/showthread.php?t=2159407 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1211920/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1180929] [NEW] macchanger no longer works in 13.04
You have been subscribed to a public bug: After upgrading (fresh install) Lubuntu to 13.04, macchanger will not change the mac address for wlan0 on boot (eth0 works). Adding the lines: pre-up macchanger -e eth0 pre-up macchanger -e wlan0 to /etc/network/interfaces will hang boot times waiting for the network on 13.04. 12.04 will load fine with MACs changed. macchanger changes eth0 fine, and trying wlan0 in terminal reports device or resource busy. Using this startup script in 13.04 works for eth0 but not wlan0: ifconfig wlan0 down iwconfig wlan0 mode monitor /usr/bin/macchanger -e wlan0 ifconfig wlan0 up I am filing this under lubuntu-desktop because I'm not sure if this is an issue with Lubuntu or network-manager, as I do not know how I can test this. I have tried running software update, and the issue still persists. ProblemType: Bug DistroRelease: Ubuntu 13.04 Package: lubuntu-desktop 0.48 ProcVersionSignature: Ubuntu 3.8.0-21.32-generic 3.8.8 Uname: Linux 3.8.0-21-generic x86_64 ApportVersion: 2.9.2-0ubuntu8 Architecture: amd64 Date: Thu May 16 12:33:04 2013 InstallationDate: Installed on 2013-05-16 (0 days ago) InstallationMedia: Lubuntu 13.04 "Raring Ringtail" - Release amd64 (20130423.1) MarkForUpload: True ProcEnviron: TERM=xterm PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash SourcePackage: lubuntu-meta UpgradeStatus: No upgrade log present (probably fresh install) ** Affects: network-manager (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug raring -- macchanger no longer works in 13.04 https://bugs.launchpad.net/bugs/1180929 You received this bug notification because you are a member of Desktop Packages, which is subscribed to network-manager in Ubuntu. -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
Re: [Desktop-packages] [Bug 1221176] Re: lightdm crashed with SIGSEGV in __libc_start_main()
*** This bug is a duplicate of bug 1211770 *** https://bugs.launchpad.net/bugs/1211770 Page doesn't exist, perhaps it is hidden? IF I HAD KNOWN ABOUT THIS EXISTED I WOULDN'T HAVE MADE A DUPLICATE!!! On 05/09/13 22:02, Apport retracing service wrote: > *** This bug is a duplicate of bug 1211770 *** > https://bugs.launchpad.net/bugs/1211770 > > Thank you for taking the time to report this crash and helping to make > this software better. This particular crash has already been reported > and is a duplicate of bug #1211770, so is being marked as such. Please > look at the other bug report to see if there is any missing information > that you can provide, or to see if there is a workaround for the bug. > Additionally, any further discussion regarding the bug should occur in > the other report. Please continue to report any other bugs you may > find. > > ** Attachment removed: "CoreDump.gz" > > https://bugs.launchpad.net/bugs/1221176/+attachment/3803726/+files/CoreDump.gz > > ** Attachment removed: "Disassembly.txt" > > https://bugs.launchpad.net/bugs/1221176/+attachment/3803728/+files/Disassembly.txt > > ** Attachment removed: "ProcMaps.txt" > > https://bugs.launchpad.net/bugs/1221176/+attachment/3803734/+files/ProcMaps.txt > > ** Attachment removed: "ProcStatus.txt" > > https://bugs.launchpad.net/bugs/1221176/+attachment/3803735/+files/ProcStatus.txt > > ** Attachment removed: "Registers.txt" > > https://bugs.launchpad.net/bugs/1221176/+attachment/3803736/+files/Registers.txt > > ** Attachment removed: "Stacktrace.txt" > > https://bugs.launchpad.net/bugs/1221176/+attachment/3803737/+files/Stacktrace.txt > > ** Attachment removed: "ThreadStacktrace.txt" > > https://bugs.launchpad.net/bugs/1221176/+attachment/3803738/+files/ThreadStacktrace.txt > > ** This bug has been marked a duplicate of private bug 1211770 > > ** Information type changed from Private to Public > > ** Tags removed: need-i386-retrace > -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to lightdm in Ubuntu. https://bugs.launchpad.net/bugs/1221176 Title: lightdm crashed with SIGSEGV in __libc_start_main() Status in “lightdm” package in Ubuntu: New Bug description: Errors keep coming up whenever the system attempts to play a login sound. ProblemType: Crash DistroRelease: Ubuntu 13.10 Package: lightdm 1.7.12-0ubuntu1 ProcVersionSignature: Ubuntu 3.11.0-4.9-generic 3.11.0-rc7 Uname: Linux 3.11.0-4-generic i686 ApportVersion: 2.12.1-0ubuntu3 Architecture: i386 Date: Thu Sep 5 21:38:05 2013 ExecutablePath: /usr/sbin/lightdm InstallationDate: Installed on 2013-09-05 (0 days ago) InstallationMedia: Lubuntu 13.10 "Saucy Salamander" - Alpha i386 (20130902.1) LightdmConfig: [SeatDefaults] greeter-session=lightdm-gtk-greeter user-session=Lubuntu MarkForUpload: True ProcCmdline: lightdm ProcEnviron: SHELL=/bin/bash TERM=xterm PATH=(custom, no user) LANG=en_AU.UTF-8 LANGUAGE=en_AU:en SegvAnalysis: Segfault happened at: 0x805029e: mov0x4(%edx),%ecx PC (0x0805029e) ok source "0x4(%edx)" (0xaaae) not located in a known VMA region (needed readable region)! destination "%ecx" ok SegvReason: reading unknown VMA Signal: 11 SourcePackage: lightdm StacktraceTop: ?? () ?? () ?? () ?? () __libc_start_main (main=0x804c7b0, argc=1, ubp_av=0xbf975d24, init=0x80687a0, fini=0x8068810, rtld_fini=0xb77d65f0 <_dl_fini>, stack_end=0xbf975d1c) at libc-start.c:260 Title: lightdm crashed with SIGSEGV in __libc_start_main() UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/lightdm/+bug/1221176/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1211920] Re: Low audio output on Vostro 5460 (with Ubuntu pre-loaded)
https://wiki.ubuntu.com/Audio/AlsaInfo -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to alsa-driver in Ubuntu. https://bugs.launchpad.net/bugs/1211920 Title: Low audio output on Vostro 5460 (with Ubuntu pre-loaded) Status in “alsa-driver” package in Ubuntu: Incomplete Bug description: I have been using a Dell Vostro 5460 for a while. It came pre-loaded with Ubuntu 12.04. Also, I could find some customizations in the same. And there's an issue of low audio output that I am facing. I have been using the 12.10 and 13.04 versions currently and the issue affects them too. Also, reportedly Windows users are facing no such issues. Some discussion regarding the same can be found at: http://ubuntuforums.org/showthread.php?t=2152776 http://ubuntuforums.org/showthread.php?t=2159407 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1211920/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1221219] [NEW] system-config-printer fails to launch. Gives ImportError.
Public bug reported: Xubuntu 13.10 beta 1 development. Settings Manager->Printers does not open Running system-config-printer from terminal gives following error: jack@jack-sb13:~$ system-config-printer ** (system-config-printer.py:1603): WARNING **: Couldn't connect to accessibility bus: Failed to connect to socket /tmp/dbus-iWKUtlwWVF: Connection refused ERROR:root:Could not find any typelib for Notify Traceback (most recent call last): File "/usr/share/system-config-printer/system-config-printer.py", line 73, in import jobviewer File "/usr/share/system-config-printer/jobviewer.py", line 27, in from gi.repository import Notify ImportError: cannot import name Notify ProblemType: Bug DistroRelease: Ubuntu 13.10 Package: system-config-printer-gnome 1.4.2-0ubuntu1 ProcVersionSignature: Ubuntu 3.11.0-4.9-generic 3.11.0-rc7 Uname: Linux 3.11.0-4-generic i686 ApportVersion: 2.12.1-0ubuntu3 Architecture: i386 CupsErrorLog: CurrentDmesg: [4.338652] r8169 :04:00.0 eth0: link up [4.338660] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Date: Thu Sep 5 09:14:54 2013 InstallationDate: Installed on 2013-09-04 (1 days ago) InstallationMedia: Xubuntu 13.10 "Saucy Salamander" - Alpha i386 (20130902.1) Lpstat: device for DESKJET-940C: ipp://jack-xubuntu.local:631/printers/DESKJET-940C device for DESKJET-940C-Test: ipp://192.168.1.2:631/printers/DESKJET-940C-Test MachineType: Dell Inc. Inspiron 660s MarkForUpload: True PackageArchitecture: all Papersize: letter ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-4-generic root=UUID=36996f3e-a233-490c-a5c5-d066ac163c2f ro quiet splash SourcePackage: system-config-printer UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 11/22/2012 dmi.bios.vendor: Dell Inc. dmi.bios.version: A09 dmi.board.name: 0XFWHV dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 3 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvrA09:bd11/22/2012:svnDellInc.:pnInspiron660s:pvr:rvnDellInc.:rn0XFWHV:rvrA00:cvnDellInc.:ct3:cvr: dmi.product.name: Inspiron 660s dmi.sys.vendor: Dell Inc. ** Affects: system-config-printer (Ubuntu) Importance: Undecided Status: New ** Tags: apport-bug i386 saucy -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to system-config-printer in Ubuntu. https://bugs.launchpad.net/bugs/1221219 Title: system-config-printer fails to launch. Gives ImportError. Status in “system-config-printer” package in Ubuntu: New Bug description: Xubuntu 13.10 beta 1 development. Settings Manager->Printers does not open Running system-config-printer from terminal gives following error: jack@jack-sb13:~$ system-config-printer ** (system-config-printer.py:1603): WARNING **: Couldn't connect to accessibility bus: Failed to connect to socket /tmp/dbus-iWKUtlwWVF: Connection refused ERROR:root:Could not find any typelib for Notify Traceback (most recent call last): File "/usr/share/system-config-printer/system-config-printer.py", line 73, in import jobviewer File "/usr/share/system-config-printer/jobviewer.py", line 27, in from gi.repository import Notify ImportError: cannot import name Notify ProblemType: Bug DistroRelease: Ubuntu 13.10 Package: system-config-printer-gnome 1.4.2-0ubuntu1 ProcVersionSignature: Ubuntu 3.11.0-4.9-generic 3.11.0-rc7 Uname: Linux 3.11.0-4-generic i686 ApportVersion: 2.12.1-0ubuntu3 Architecture: i386 CupsErrorLog: CurrentDmesg: [4.338652] r8169 :04:00.0 eth0: link up [4.338660] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Date: Thu Sep 5 09:14:54 2013 InstallationDate: Installed on 2013-09-04 (1 days ago) InstallationMedia: Xubuntu 13.10 "Saucy Salamander" - Alpha i386 (20130902.1) Lpstat: device for DESKJET-940C: ipp://jack-xubuntu.local:631/printers/DESKJET-940C device for DESKJET-940C-Test: ipp://192.168.1.2:631/printers/DESKJET-940C-Test MachineType: Dell Inc. Inspiron 660s MarkForUpload: True PackageArchitecture: all Papersize: letter ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-4-generic root=UUID=36996f3e-a233-490c-a5c5-d066ac163c2f ro quiet splash SourcePackage: system-config-printer UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 11/22/2012 dmi.bios.vendor: Dell Inc. dmi.bios.version: A09 dmi.board.name: 0XFWHV dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 3 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvrA09:bd11/22/2012:svnDellInc.:pnInspiron660s:pvr:rvnDellInc.:rn0XFWHV:rvrA00:cvnDellInc.:ct3:cvr: dmi.product.name: Inspiron 660s dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/system-config-printer/+bug/1221219/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to
Re: [Desktop-packages] [Bug 1221176] Re: lightdm crashed with SIGSEGV in __libc_start_main()
*** This bug is a duplicate of bug 1211770 *** https://bugs.launchpad.net/bugs/1211770 And then the system sends the message to a bug page I can't access, how stupid. Sorry about my previous post. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to lightdm in Ubuntu. https://bugs.launchpad.net/bugs/1221176 Title: lightdm crashed with SIGSEGV in __libc_start_main() Status in “lightdm” package in Ubuntu: New Bug description: Errors keep coming up whenever the system attempts to play a login sound. ProblemType: Crash DistroRelease: Ubuntu 13.10 Package: lightdm 1.7.12-0ubuntu1 ProcVersionSignature: Ubuntu 3.11.0-4.9-generic 3.11.0-rc7 Uname: Linux 3.11.0-4-generic i686 ApportVersion: 2.12.1-0ubuntu3 Architecture: i386 Date: Thu Sep 5 21:38:05 2013 ExecutablePath: /usr/sbin/lightdm InstallationDate: Installed on 2013-09-05 (0 days ago) InstallationMedia: Lubuntu 13.10 "Saucy Salamander" - Alpha i386 (20130902.1) LightdmConfig: [SeatDefaults] greeter-session=lightdm-gtk-greeter user-session=Lubuntu MarkForUpload: True ProcCmdline: lightdm ProcEnviron: SHELL=/bin/bash TERM=xterm PATH=(custom, no user) LANG=en_AU.UTF-8 LANGUAGE=en_AU:en SegvAnalysis: Segfault happened at: 0x805029e: mov0x4(%edx),%ecx PC (0x0805029e) ok source "0x4(%edx)" (0xaaae) not located in a known VMA region (needed readable region)! destination "%ecx" ok SegvReason: reading unknown VMA Signal: 11 SourcePackage: lightdm StacktraceTop: ?? () ?? () ?? () ?? () __libc_start_main (main=0x804c7b0, argc=1, ubp_av=0xbf975d24, init=0x80687a0, fini=0x8068810, rtld_fini=0xb77d65f0 <_dl_fini>, stack_end=0xbf975d1c) at libc-start.c:260 Title: lightdm crashed with SIGSEGV in __libc_start_main() UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/lightdm/+bug/1221176/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1180929] Re: macchanger no longer works in 13.04
** Package changed: lubuntu-meta (Ubuntu) => network-manager (Ubuntu) -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1180929 Title: macchanger no longer works in 13.04 Status in “network-manager” package in Ubuntu: New Bug description: After upgrading (fresh install) Lubuntu to 13.04, macchanger will not change the mac address for wlan0 on boot (eth0 works). Adding the lines: pre-up macchanger -e eth0 pre-up macchanger -e wlan0 to /etc/network/interfaces will hang boot times waiting for the network on 13.04. 12.04 will load fine with MACs changed. macchanger changes eth0 fine, and trying wlan0 in terminal reports device or resource busy. Using this startup script in 13.04 works for eth0 but not wlan0: ifconfig wlan0 down iwconfig wlan0 mode monitor /usr/bin/macchanger -e wlan0 ifconfig wlan0 up I am filing this under lubuntu-desktop because I'm not sure if this is an issue with Lubuntu or network-manager, as I do not know how I can test this. I have tried running software update, and the issue still persists. ProblemType: Bug DistroRelease: Ubuntu 13.04 Package: lubuntu-desktop 0.48 ProcVersionSignature: Ubuntu 3.8.0-21.32-generic 3.8.8 Uname: Linux 3.8.0-21-generic x86_64 ApportVersion: 2.9.2-0ubuntu8 Architecture: amd64 Date: Thu May 16 12:33:04 2013 InstallationDate: Installed on 2013-05-16 (0 days ago) InstallationMedia: Lubuntu 13.04 "Raring Ringtail" - Release amd64 (20130423.1) MarkForUpload: True ProcEnviron: TERM=xterm PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash SourcePackage: lubuntu-meta UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1180929/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1221219] Re: system-config-printer fails to launch. Gives ImportError.
This bug has been reported on the Ubuntu ISO testing tracker. A list of all reports related to this bug can be found here: http://iso.qa.ubuntu.com/qatracker/reports/bugs/1221219 ** Tags added: iso-testing -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to system-config-printer in Ubuntu. https://bugs.launchpad.net/bugs/1221219 Title: system-config-printer fails to launch. Gives ImportError. Status in “system-config-printer” package in Ubuntu: Confirmed Bug description: Xubuntu 13.10 beta 1 development. Settings Manager->Printers does not open Running system-config-printer from terminal gives following error: jack@jack-sb13:~$ system-config-printer ** (system-config-printer.py:1603): WARNING **: Couldn't connect to accessibility bus: Failed to connect to socket /tmp/dbus-iWKUtlwWVF: Connection refused ERROR:root:Could not find any typelib for Notify Traceback (most recent call last): File "/usr/share/system-config-printer/system-config-printer.py", line 73, in import jobviewer File "/usr/share/system-config-printer/jobviewer.py", line 27, in from gi.repository import Notify ImportError: cannot import name Notify ProblemType: Bug DistroRelease: Ubuntu 13.10 Package: system-config-printer-gnome 1.4.2-0ubuntu1 ProcVersionSignature: Ubuntu 3.11.0-4.9-generic 3.11.0-rc7 Uname: Linux 3.11.0-4-generic i686 ApportVersion: 2.12.1-0ubuntu3 Architecture: i386 CupsErrorLog: CurrentDmesg: [4.338652] r8169 :04:00.0 eth0: link up [4.338660] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Date: Thu Sep 5 09:14:54 2013 InstallationDate: Installed on 2013-09-04 (1 days ago) InstallationMedia: Xubuntu 13.10 "Saucy Salamander" - Alpha i386 (20130902.1) Lpstat: device for DESKJET-940C: ipp://jack-xubuntu.local:631/printers/DESKJET-940C device for DESKJET-940C-Test: ipp://192.168.1.2:631/printers/DESKJET-940C-Test MachineType: Dell Inc. Inspiron 660s MarkForUpload: True PackageArchitecture: all Papersize: letter ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-4-generic root=UUID=36996f3e-a233-490c-a5c5-d066ac163c2f ro quiet splash SourcePackage: system-config-printer UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 11/22/2012 dmi.bios.vendor: Dell Inc. dmi.bios.version: A09 dmi.board.name: 0XFWHV dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 3 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvrA09:bd11/22/2012:svnDellInc.:pnInspiron660s:pvr:rvnDellInc.:rn0XFWHV:rvrA00:cvnDellInc.:ct3:cvr: dmi.product.name: Inspiron 660s dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/system-config-printer/+bug/1221219/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1221219] Re: system-config-printer fails to launch. Gives ImportError.
Status changed to 'Confirmed' because the bug affects multiple users. ** Changed in: system-config-printer (Ubuntu) Status: New => Confirmed -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to system-config-printer in Ubuntu. https://bugs.launchpad.net/bugs/1221219 Title: system-config-printer fails to launch. Gives ImportError. Status in “system-config-printer” package in Ubuntu: Confirmed Bug description: Xubuntu 13.10 beta 1 development. Settings Manager->Printers does not open Running system-config-printer from terminal gives following error: jack@jack-sb13:~$ system-config-printer ** (system-config-printer.py:1603): WARNING **: Couldn't connect to accessibility bus: Failed to connect to socket /tmp/dbus-iWKUtlwWVF: Connection refused ERROR:root:Could not find any typelib for Notify Traceback (most recent call last): File "/usr/share/system-config-printer/system-config-printer.py", line 73, in import jobviewer File "/usr/share/system-config-printer/jobviewer.py", line 27, in from gi.repository import Notify ImportError: cannot import name Notify ProblemType: Bug DistroRelease: Ubuntu 13.10 Package: system-config-printer-gnome 1.4.2-0ubuntu1 ProcVersionSignature: Ubuntu 3.11.0-4.9-generic 3.11.0-rc7 Uname: Linux 3.11.0-4-generic i686 ApportVersion: 2.12.1-0ubuntu3 Architecture: i386 CupsErrorLog: CurrentDmesg: [4.338652] r8169 :04:00.0 eth0: link up [4.338660] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Date: Thu Sep 5 09:14:54 2013 InstallationDate: Installed on 2013-09-04 (1 days ago) InstallationMedia: Xubuntu 13.10 "Saucy Salamander" - Alpha i386 (20130902.1) Lpstat: device for DESKJET-940C: ipp://jack-xubuntu.local:631/printers/DESKJET-940C device for DESKJET-940C-Test: ipp://192.168.1.2:631/printers/DESKJET-940C-Test MachineType: Dell Inc. Inspiron 660s MarkForUpload: True PackageArchitecture: all Papersize: letter ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-4-generic root=UUID=36996f3e-a233-490c-a5c5-d066ac163c2f ro quiet splash SourcePackage: system-config-printer UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 11/22/2012 dmi.bios.vendor: Dell Inc. dmi.bios.version: A09 dmi.board.name: 0XFWHV dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 3 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvrA09:bd11/22/2012:svnDellInc.:pnInspiron660s:pvr:rvnDellInc.:rn0XFWHV:rvrA00:cvnDellInc.:ct3:cvr: dmi.product.name: Inspiron 660s dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/system-config-printer/+bug/1221219/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1220973] Re: Unable to change MAC-address for wireless adapter(s)
** Package changed: gnome-terminal (Ubuntu) => network-manager (Ubuntu) -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1220973 Title: Unable to change MAC-address for wireless adapter(s) Status in “network-manager” package in Ubuntu: New Bug description: Am having no issues making MAC-address changes to a wired adapter, only to the wireless adapters. Have replicated problem on two PCs (Ubuntu 13.04, updated as of Sept 5 2013). On both PCs, have tried two wireless adapters, one internal, the other USB. Same result. On one PC, the internal wireless presents as 'eth1' and the USB as 'wlan0'. On the second, the internal presents as 'wlan0' and the USB as 'wlan1'. But same result. Problem occurs when using either Macchanger (GNU MAC changer v1.5.0) or "sudo ifconfig wlan0 down / sudo ifconfig wlan0 hw ether xx:xx:xx:xx:xx:xx" in Terminal. Macchanger gives error "Can't change MAC: interface up or not permission: Invalid argument", while Terminal gives error "SIOCSIFHWADDR: Invalid argument". Same on both PCs. I note the similarity to Bug #1180929, reported on on 2013-05-16. Reports also appear in Ubuntu forums at: - ubuntuforums.org/showthread.php?t=2158910 - ubuntuforums.org/showthread.php?t=2145828 Network-manager version is 0.9.8.0-0ubuntu6 Many thanks. ProblemType: Bug DistroRelease: Ubuntu 13.04 Package: gnome-terminal 3.6.1-0ubuntu4 ProcVersionSignature: Ubuntu 3.8.0-29.42-generic 3.8.13.5 Uname: Linux 3.8.0-29-generic i686 NonfreeKernelModules: wl ApportVersion: 2.9.2-0ubuntu8.3 Architecture: i386 Date: Thu Sep 5 11:08:26 2013 ExecutablePath: /usr/bin/gnome-terminal InstallationDate: Installed on 2013-08-13 (22 days ago) InstallationMedia: Ubuntu 13.04 "Raring Ringtail" - Release i386 (20130424) MarkForUpload: True SourcePackage: gnome-terminal UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1220973/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1221176] Re: lightdm crashed with SIGSEGV in __libc_start_main()
Apport retraction service, you should engage your brain before opening your mouthm your comment is very stupid because I cannot access the page to determain if it is the same one so therefore I cannot comment on the other bug either. ** This bug is no longer a duplicate of private bug 1211770 -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to lightdm in Ubuntu. https://bugs.launchpad.net/bugs/1221176 Title: lightdm crashed with SIGSEGV in __libc_start_main() Status in “lightdm” package in Ubuntu: New Bug description: Errors keep coming up whenever the system attempts to play a login sound. ProblemType: Crash DistroRelease: Ubuntu 13.10 Package: lightdm 1.7.12-0ubuntu1 ProcVersionSignature: Ubuntu 3.11.0-4.9-generic 3.11.0-rc7 Uname: Linux 3.11.0-4-generic i686 ApportVersion: 2.12.1-0ubuntu3 Architecture: i386 Date: Thu Sep 5 21:38:05 2013 ExecutablePath: /usr/sbin/lightdm InstallationDate: Installed on 2013-09-05 (0 days ago) InstallationMedia: Lubuntu 13.10 "Saucy Salamander" - Alpha i386 (20130902.1) LightdmConfig: [SeatDefaults] greeter-session=lightdm-gtk-greeter user-session=Lubuntu MarkForUpload: True ProcCmdline: lightdm ProcEnviron: SHELL=/bin/bash TERM=xterm PATH=(custom, no user) LANG=en_AU.UTF-8 LANGUAGE=en_AU:en SegvAnalysis: Segfault happened at: 0x805029e: mov0x4(%edx),%ecx PC (0x0805029e) ok source "0x4(%edx)" (0xaaae) not located in a known VMA region (needed readable region)! destination "%ecx" ok SegvReason: reading unknown VMA Signal: 11 SourcePackage: lightdm StacktraceTop: ?? () ?? () ?? () ?? () __libc_start_main (main=0x804c7b0, argc=1, ubp_av=0xbf975d24, init=0x80687a0, fini=0x8068810, rtld_fini=0xb77d65f0 <_dl_fini>, stack_end=0xbf975d1c) at libc-start.c:260 Title: lightdm crashed with SIGSEGV in __libc_start_main() UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/lightdm/+bug/1221176/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1211920] Re: Low audio output on Vostro 5460 (with Ubuntu pre-loaded)
!! !!ALSA Information Script v 0.4.62 !! !!Script ran on: Thu Sep 5 13:32:28 UTC 2013 !!Linux Distribution !!-- Ubuntu 12.04.3 LTS \n \l DISTRIB_ID=Ubuntu DISTRIB_DESCRIPTION="Ubuntu 12.04.3 LTS" NAME="Ubuntu" ID=ubuntu ID_LIKE=debian PRETTY_NAME="Ubuntu precise (12.04.3 LTS)" !!DMI Information !!--- Manufacturer: Dell Inc. Product Name: Vostro 5460 Product Version: Firmware Version: A05 !!Kernel Information !!-- Kernel release:3.2.0-52-generic Operating System: GNU/Linux Architecture: x86_64 Processor: x86_64 SMP Enabled: Yes !!ALSA Version !! Driver version: 1.0.24 Library version:1.0.25 Utilities version: 1.0.25 !!Loaded ALSA modules !!--- snd_hda_intel !!Sound Servers on this system !! Pulseaudio: Installed - Yes (/usr/bin/pulseaudio) Running - Yes !!Soundcards recognised by ALSA !!- 0 [PCH]: HDA-Intel - HDA Intel PCH HDA Intel PCH at 0xf261 irq 47 !!PCI Soundcards installed in the system !!-- 00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04) !!Advanced information - PCI Vendor/Device/Subsystem ID's !!--- 00:1b.0 0403: 8086:1e20 (rev 04) Subsystem: 1028:05da !!Modprobe options (Sound related) !! snd-atiixp-modem: index=-2 snd-intel8x0m: index=-2 snd-via82xx-modem: index=-2 snd-usb-audio: index=-2 snd-usb-caiaq: index=-2 snd-usb-ua101: index=-2 snd-usb-us122l: index=-2 snd-usb-usx2y: index=-2 snd-cmipci: mpu_port=0x330 fm_port=0x388 snd-pcsp: index=-2 snd-usb-audio: index=-2 snd-hda-intel: patch=hda-jack-retask.fw,hda-jack-retask.fw,hda-jack-retask.fw,hda-jack-retask.fw !!Loaded sound module options !!--- !!Module: snd_hda_intel align_buffer_size : -1 bdl_pos_adj : 1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1 beep_mode : N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N enable : Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y enable_msi : -1 id : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null) index : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1 jackpoll_ms : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 model : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null) patch : hda-jack-retask.fw,hda-jack-retask.fw,hda-jack-retask.fw,hda-jack-retask.fw,(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null) position_fix : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1 power_save : 0 power_save_controller : Y probe_mask : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1 probe_only : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 single_cmd : N snoop : Y !!HDA-Intel Codec information !!--- --startcollapse-- Codec: Realtek ALC290 Address: 0 AFG Function Id: 0x1 (unsol 1) Vendor Id: 0x10ec0290 Subsystem Id: 0x102805d9 Revision Id: 0x13 No Modem Function Group found Default PCM: rates [0x5f0]: 32000 44100 48000 88200 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Default Amp-In caps: N/A Default Amp-Out caps: N/A GPIO: io=5, o=0, i=0, unsolicited=1, wake=0 IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[1]: enable=1, dir=1, wake=0, sticky=0, data=1, unsol=0 IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[3]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[4]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 Node 0x02 [Audio Output] wcaps 0x41d: Stereo Amp-Out Amp-Out caps: ofs=0x57, nsteps=0x57, stepsize=0x02, mute=0 Amp-Out vals: [0x4b 0x4b] Converter: stream=8, channel=0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Node 0x03 [Audio Output] wcaps 0x41d: Stereo Amp-Out Contro
[Desktop-packages] [Bug 1214888] Re: Empathy can't connect to Facebook anymore
Status changed to 'Confirmed' because the bug affects multiple users. ** Changed in: empathy (Ubuntu) Status: New => Confirmed -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to empathy in Ubuntu. https://bugs.launchpad.net/bugs/1214888 Title: Empathy can't connect to Facebook anymore Status in “empathy” package in Ubuntu: Confirmed Bug description: I use Ubuntu GNOME with only the GNOME online accounts settings installed. Adding a Facebook account works, but Empathy can't connect to it, giving an error: "Authentication failed" ProblemType: Bug DistroRelease: Ubuntu 13.10 Package: empathy 3.8.3-0ubuntu5 ProcVersionSignature: Ubuntu 3.11.0-3.6-generic 3.11.0-rc6 Uname: Linux 3.11.0-3-generic x86_64 NonfreeKernelModules: nvidia ApportVersion: 2.12.1-0ubuntu2 Architecture: amd64 Date: Wed Aug 21 15:17:02 2013 MarkForUpload: True SourcePackage: empathy UpgradeStatus: Upgraded to saucy on 2013-06-17 (65 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/empathy/+bug/1214888/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1218294] Re: [dialer app] During a live call, there's no volume adjustment available
I'm on Nexus 4. Volume set today is too soft to hear. The same problem occurs for earpiece. Haven't tested with speaker phone yet. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to pulseaudio in Ubuntu. https://bugs.launchpad.net/bugs/1218294 Title: [dialer app] During a live call, there's no volume adjustment available Status in Dialer app for Ubuntu Touch: New Status in Ubuntu UX bugs: Fix Committed Status in “dialer-app” package in Ubuntu: New Status in “ofono” package in Ubuntu: Invalid Status in “pulseaudio” package in Ubuntu: Incomplete Bug description: Current situation: Can't adjust the voice volume during a live call, making it difficult to hear the receiver Desired: Can adjust volume during a live call (Eg using the volume buttons on the device) To manage notifications about this bug go to: https://bugs.launchpad.net/dialer-app/+bug/1218294/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 34058] Re: Selecting SSL/TLS encryption for IMAP account connects to wrong server port
** Changed in: evolution Status: Confirmed => Expired -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to evolution in Ubuntu. https://bugs.launchpad.net/bugs/34058 Title: Selecting SSL/TLS encryption for IMAP account connects to wrong server port Status in The Evolution Mail & Calendaring Tool: Expired Status in “evolution” package in Ubuntu: Triaged Bug description: This report applies to evolution package 2.5.92-0ubuntu1. While editing my IMAP account properties, Evolution lets me select connection encryption type under the "Security" heading on the "Receiving Email" tab. The problem is, if I choose SSL or TLS encryption, Evolution attempts to connect to my mail server on port 143. Many IMAP servers are configured to offer TLS/SSL connections on server port 993 (imaps). Since this version of Evolution does not allow me to specify the IMAP port it should connect to, and since it does not use port 993 when 143 is closed, I cannot check my email. To manage notifications about this bug go to: https://bugs.launchpad.net/evolution/+bug/34058/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1184451] Re: Ubuntu 13.10 random screen freeze while Normal OS activites
Apropos, please write which graphics driver do you use. I use radeon. Below I attach Xorg.0.log when xorg is almost frozen and I need to restart it from terminal. Short peace of it: [1048945.485] [mi] These backtraces from mieqEnqueue may point to a culprit higher up the stack. [1048945.485] [mi] mieq is *NOT* the cause. It is a victim. [1048945.827] [mi] EQ processing has resumed after 43 dropped events. [1048945.827] [mi] This may be caused my a misbehaving driver monopolizing the server's resources. ** Attachment added: "Xorg.0.log_bad_X" https://bugs.launchpad.net/ubuntu/+source/xorg-server/+bug/1184451/+attachment/3803967/+files/Xorg.0.log_bad_X -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xorg-server in Ubuntu. https://bugs.launchpad.net/bugs/1184451 Title: Ubuntu 13.10 random screen freeze while Normal OS activites Status in “xorg-server” package in Ubuntu: Confirmed Bug description: I have recently, re-installed fresh ubuntu 13.10 distribution release. But everything worked fine. until recently i had strange problem of my display screen getting freezed randomly; but no response to either mouse/keyboard. But i want to point it out; it happens randomly and is not specific ? Other day, i had music player playing in background, but screen freezed. but my music was still running. Kindly note, i used multiple monitor setup and same issue of screen freeze also cropped up. I,am not sure, whether it is bug ? thanks for the expertise support. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xorg-server/+bug/1184451/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1149506] Re: telepathy-idle hogs ~25% cpu
The issue has been fixed upstream in git for 0.1.18. Hopefully it will be released soon so it can be included in 13.10 or can we expect an update for 13.04 as well? -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to telepathy-idle in Ubuntu. https://bugs.launchpad.net/bugs/1149506 Title: telepathy-idle hogs ~25% cpu Status in “telepathy-idle” package in Ubuntu: Confirmed Bug description: Start empathy with IRC account. Use for a while. Telepathy-idle begins using large amount of CPU. ProblemType: Bug DistroRelease: Ubuntu 13.04 Package: telepathy-idle 0.1.14-1 ProcVersionSignature: Ubuntu 3.8.0-10.19-generic 3.8.2 Uname: Linux 3.8.0-10-generic x86_64 ApportVersion: 2.9-0ubuntu2 Architecture: amd64 Date: Wed Mar 6 13:21:45 2013 InstallationDate: Installed on 2013-03-02 (4 days ago) InstallationMedia: Ubuntu 13.04 "Raring Ringtail" - Alpha amd64 (20130302) MarkForUpload: True SourcePackage: telepathy-idle UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/telepathy-idle/+bug/1149506/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1010155] Re: keyboard layout switch not represented in the top icon
*** This bug is a duplicate of bug 741869 *** https://bugs.launchpad.net/bugs/741869 ** This bug is no longer a duplicate of bug 950160 Unity blocks other programs from binding globally to Super+* (* = any key) ** This bug has been marked a duplicate of bug 741869 Unity/compiz intercepts Super and Alt keypresses from grabbed windows like VMs. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to unity in Ubuntu. Matching subscriptions: dp-unity https://bugs.launchpad.net/bugs/1010155 Title: keyboard layout switch not represented in the top icon Status in “unity” package in Ubuntu: New Bug description: I switch between 2 keyboard layouts - English and Hebrew. Pressing Alt-Shift switches the keyboard, but the icon in the top of screen doesn't change. Switching back doesn't change it also. Switching again, might change it. The keyboard layout, as far as I can judge, is Ok. The icon doesn't always follow the keyboard. Not consistent, but also not rare. ProblemType: Bug DistroRelease: Ubuntu 12.04 Package: unity 5.12-0ubuntu1.1 ProcVersionSignature: Ubuntu 3.2.0-24.39-generic 3.2.16 Uname: Linux 3.2.0-24-generic x86_64 NonfreeKernelModules: nvidia ApportVersion: 2.0.1-0ubuntu8 Architecture: amd64 CompizPlugins: [core,composite,opengl,compiztoolbox,decor,vpswitch,snap,mousepoll,resize,place,move,wall,grid,regex,imgpng,session,gnomecompat,animation,fade,unitymtgrabhandles,workarounds,scale,expo,ezoom,unityshell] Date: Thu Jun 7 21:42:52 2012 InstallationMedia: Ubuntu 12.04 LTS "Precise Pangolin" - Release amd64 (20120425) ProcEnviron: LANGUAGE=en_US:en PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash SourcePackage: unity UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/unity/+bug/1010155/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 995885] Re: Custom keyboard shortcuts do not work if they use the Super key
*** This bug is a duplicate of bug 741869 *** https://bugs.launchpad.net/bugs/741869 ** This bug is no longer a duplicate of bug 950160 Unity blocks other programs from binding globally to Super+* (* = any key) ** This bug has been marked a duplicate of bug 741869 Unity/compiz intercepts Super and Alt keypresses from grabbed windows like VMs. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gnome-control-center in Ubuntu. https://bugs.launchpad.net/bugs/995885 Title: Custom keyboard shortcuts do not work if they use the Super key Status in “gnome-control-center” package in Ubuntu: Incomplete Bug description: Prior to Precise 12.04, you could use the Super key in shortcuts, for example Ctrl-Super-M. However, with 12.04, if you set a shortcut with Super, it simply does not work. There is no error message; it just doesn't do anything. To duplicate: First, ensure that zenity is installed (it should be, by default). Second, create the shortcut: 1. System Settings > Keyboard > Shortcuts > Custom Shortcuts 2. Press "+". 3. Name: Test 4. Command: zenity --info --title='Test' --text='Testing shortcuts' 5. Apply. 6. Click on "Disabled". 7. Press Ctrl-Alt-M Third, test it: 1. Press Ctrl-Alt-M 2. A dialogue displays. 3. Close the dialogue. Fourth, use the Super key: 1. Click where it says "Ctrl-Alt-M" 2. Press Ctrl-Super-M Fifth, test it again: 1. Press Ctrl-Super-M 2. Nothing happens. What should happen: A dialogue displays. ProblemType: Bug DistroRelease: Ubuntu 12.04 Package: gnome-control-center 1:3.4.1-0ubuntu1 ProcVersionSignature: Ubuntu 3.2.0-24.37-generic 3.2.14 Uname: Linux 3.2.0-24-generic x86_64 ApportVersion: 2.0.1-0ubuntu7 Architecture: amd64 Date: Mon May 7 11:39:23 2012 EcryptfsInUse: Yes ExecutablePath: /usr/bin/gnome-control-center InstallationMedia: Ubuntu 12.04 LTS "Precise Pangolin" - Beta amd64 (20120301) ProcEnviron: LANGUAGE=en_GB:en PATH=(custom, user) LANG=en_GB.UTF-8 SHELL=/bin/bash SourcePackage: gnome-control-center UpgradeStatus: No upgrade log present (probably fresh install) usr_lib_gnome-control-center: activity-log-manager-control-center 0.9.4-0ubuntu3 deja-dup22.0-0ubuntu2 gnome-bluetooth 3.2.2-0ubuntu5 indicator-datetime 0.3.94-0ubuntu2 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-control-center/+bug/995885/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 950160] Re: Unity blocks other programs from binding globally to Super+* (* = any key)
*** This bug is a duplicate of bug 741869 *** https://bugs.launchpad.net/bugs/741869 ** This bug has been marked a duplicate of bug 741869 Unity/compiz intercepts Super and Alt keypresses from grabbed windows like VMs. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gnome-settings-daemon in Ubuntu. https://bugs.launchpad.net/bugs/950160 Title: Unity blocks other programs from binding globally to Super+* (* = any key) Status in Compiz: Fix Released Status in Compiz 0.9.8 series: In Progress Status in Compiz Core: Confirmed Status in Gnome Settings Daemon: Fix Released Status in OEM Priority Project: Won't Fix Status in OEM Priority Project precise series: Won't Fix Status in Unity: Fix Released Status in Unity 5.0 series: Triaged Status in Unity 6.0 series: In Progress Status in “compiz” package in Ubuntu: Fix Released Status in “gnome-settings-daemon” package in Ubuntu: Fix Released Status in “unity” package in Ubuntu: In Progress Status in “compiz” source package in Precise: Triaged Status in “gnome-settings-daemon” source package in Precise: Fix Released Status in “unity” source package in Precise: Triaged Status in “compiz” source package in Quantal: Triaged Status in “gnome-settings-daemon” source package in Quantal: Fix Released Status in “unity” source package in Quantal: In Progress Bug description: WORKAROUND 1: Run CCSM and under "Ubuntu Unity Plugin" change the key binding for "Key to show the launcher" to something else (e.g. Super+U). Then log out and in again. As long as no compiz plugin is bound to the single Super key any more, compiz will no longer block other apps from binding to Super+other_keys. WORKAROUND 2: 1. Write a script or figure out the command to do the action you want. 2. Run ccsm. 3. Enable the "Commands" plugin 4. In the Commands settings, fill in the command line you want and bind it to key Super+P. Now Unity will run your specified command on Super+P, but still handle the Super key as usual. [Precise SRU Justification] [Impact] Any shortcut with Super, Hyper, Meta virtual modifiers does not work [Test Case] Attach an external monitor to the laptop, press Super+P, it should do the video switch as this function is implemented in gnome-settings-daemon. A patch in comment #12 is now accepted upstream and a test package with that patch is available in comment #14. From the test result, the patch at least fixes Unity-2D. [Regression Potential] The patch is accepted upstream and is also cherry-picked in the gnome-3-4 branch of g-s-d git tree. g-s-d version in Precise is 3.4.2. So the risk of regression should be rather low. [Other] I prepare a debdiff in comment #31 for convenience. I hope the patch can be in both Quantal and Precise. ORIGINAL DESCRIPTION: Using : 12.04 Beta 1, updated. and Unity. In 11.10 clicking: - the function key (Fn) + (F1) allowed to switch between the laptop screen and the external monitor. After upgrading to 12.04 this no more works and instead I get an unexpected behavior: see the video. https://www.youtube.com/watch?v=-vEnrV5TwXo System: Dell XPS 15 L502X ProblemType: Bug DistroRelease: Ubuntu 12.04 Package: ubuntu-sso-client 2.99.90-0ubuntu2 ProcVersionSignature: Ubuntu 3.2.0-18.28-generic 3.2.9 Uname: Linux 3.2.0-18-generic x86_64 ApportVersion: 1.94.1-0ubuntu1 Architecture: amd64 Date: Thu Mar 8 19:18:42 2012 InstallationMedia: Ubuntu 11.10 "Oneiric Ocelot" - Release amd64 (20111012) PackageArchitecture: all SourcePackage: ubuntu-sso-client UpgradeStatus: Upgraded to precise on 2012-03-02 (6 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/compiz/+bug/950160/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 780803] Re: Unity prevents synergy from catching 'super' keypresses
*** This bug is a duplicate of bug 741869 *** https://bugs.launchpad.net/bugs/741869 ** This bug is no longer a duplicate of bug 950160 Unity blocks other programs from binding globally to Super+* (* = any key) ** This bug has been marked a duplicate of bug 741869 Unity/compiz intercepts Super and Alt keypresses from grabbed windows like VMs. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to unity in Ubuntu. Matching subscriptions: dp-unity https://bugs.launchpad.net/bugs/780803 Title: Unity prevents synergy from catching 'super' keypresses Status in Synergy: New Status in Unity: Fix Released Status in “unity” package in Ubuntu: Confirmed Bug description: When a computer running Unity is used as a keyboard and mouse host for synergy, Unity catches 'super' keypresses meant for other computers. To manage notifications about this bug go to: https://bugs.launchpad.net/synergy2/+bug/780803/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 997286] Re: Dell's Inspiron n5110 touchpad activity led + Fn+F1 (display switch shortcut) not working on 12.04 precise
*** This bug is a duplicate of bug 741869 *** https://bugs.launchpad.net/bugs/741869 ** This bug is no longer a duplicate of bug 950160 Unity blocks other programs from binding globally to Super+* (* = any key) ** This bug has been marked a duplicate of bug 741869 Unity/compiz intercepts Super and Alt keypresses from grabbed windows like VMs. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to unity in Ubuntu. Matching subscriptions: dp-unity https://bugs.launchpad.net/bugs/997286 Title: Dell's Inspiron n5110 touchpad activity led + Fn+F1 (display switch shortcut) not working on 12.04 precise Status in “unity” package in Ubuntu: Confirmed Bug description: These are 3 bugs that are occurring on my Dell Inspiron n5110 notebook which I believe are related to each other somehow. Just to make it clear I'm currently running Ubuntu 12.04 from an USB live session. 1st) I can't switch monitor output mode using default shortcut keys Fn+F1. Switching them through Displays option available on System Settings work as expected though. 2nd) Shortcut keys for enabling and disabling touchpad (Fn+F3) are actually working but there's this little led light on my notebook that indicates when touchpad is disabled. It works on Windows 7 when I hit those keys they will turn on the little orange led light upon disabling the touchpad, however I have not yet tested this behavior on another linux distro, or any other Windows version for that matter. 3rd) HDMI will always mess up with LightDM display resolution when I boot Ubuntu with HDMI cable connected. Resolution is fine when I boot Ubuntu without HDMI cable connected. However when HDMI cable is connected to the port LightDM will output a "squared" resolution which is no good neither on laptop's main display nor on my widescreen TV. Actually Ubuntu just outputs a mirrored setup for both monitors. Thank you in advance. ProblemType: Bug DistroRelease: Ubuntu 12.04 Package: unity 5.10.0-0ubuntu6 ProcVersionSignature: Ubuntu 3.2.0-23.36-generic 3.2.14 Uname: Linux 3.2.0-23-generic x86_64 ApportVersion: 2.0.1-0ubuntu5 Architecture: amd64 CasperVersion: 1.315 CompizPlugins: [core,composite,opengl,compiztoolbox,decor,vpswitch,snap,mousepoll,resize,place,move,wall,grid,regex,imgpng,session,gnomecompat,animation,fade,unitymtgrabhandles,workarounds,scale,expo,ezoom,unityshell] Date: Wed May 9 18:58:03 2012 LiveMediaBuild: Ubuntu 12.04 LTS "Precise Pangolin" - Release amd64 (20120425) ProcEnviron: TERM=xterm PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash SourcePackage: unity UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/unity/+bug/997286/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 994196] Re: some global user defined shortcuts not working
*** This bug is a duplicate of bug 741869 *** https://bugs.launchpad.net/bugs/741869 ** This bug is no longer a duplicate of bug 950160 Unity blocks other programs from binding globally to Super+* (* = any key) ** This bug has been marked a duplicate of bug 741869 Unity/compiz intercepts Super and Alt keypresses from grabbed windows like VMs. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gnome-control-center in Ubuntu. https://bugs.launchpad.net/bugs/994196 Title: some global user defined shortcuts not working Status in “gnome-control-center” package in Ubuntu: Confirmed Bug description: I've upgraded to 12.04 and my custom global shortcuts for multimedia stopped working. Everything was working great in 11.10. My settings: - previous track - next track - pause/play http://img109.imageshack.us/img109/1838/zrzutekranuz20120503220.png I have Logitech UltraX Premium Keyboard which have few multimedia keys like mute, volume up/down, run default sound player, and play/pause. I have Amarok as my default player in ubuntu and I've set "Launch media player" to the multimedia key and it runs amarok. I've also tried setting "Play (or play/pause)" to my play/pause multimedia key but it didn't work. Don't know if it is problem with control center or with amarok, so I'm putting it here, where somebody could look and move to apropriate package :). I've also tried to look for similar bugs but I'm constantly getting timeout error on lunchpad. Thanks for help. My os: piotrek@piotrek-desktop:~$ lsb_release -rd Description: Ubuntu 12.04 LTS Release: 12.04 Amarok version: 2:2.5.0-0ubuntu6 ProblemType: Bug DistroRelease: Ubuntu 12.04 Package: gnome-control-center 1:3.4.1-0ubuntu2 ProcVersionSignature: Ubuntu 3.2.0-24.38-generic 3.2.16 Uname: Linux 3.2.0-24-generic x86_64 NonfreeKernelModules: nvidia ApportVersion: 2.0.1-0ubuntu7 Architecture: amd64 Date: Thu May 3 21:37:57 2012 ExecutablePath: /usr/bin/gnome-control-center InstallationMedia: Ubuntu 11.10 "Oneiric Ocelot" - Release amd64 (20111012) ProcEnviron: SHELL=/bin/bash PATH=(custom, no user) LANG=pl_PL.UTF-8 SourcePackage: gnome-control-center UpgradeStatus: Upgraded to precise on 2012-04-30 (3 days ago) usr_lib_gnome-control-center: activity-log-manager-control-center 0.9.4-0ubuntu3 deja-dup22.0-0ubuntu2 gnome-bluetooth 3.2.2-0ubuntu5 indicator-datetime 0.3.94-0ubuntu2 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-control-center/+bug/994196/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 994346] Re: Custom Shortcuts with Super Key do not work
*** This bug is a duplicate of bug 741869 *** https://bugs.launchpad.net/bugs/741869 ** This bug is no longer a duplicate of bug 950160 Unity blocks other programs from binding globally to Super+* (* = any key) ** This bug has been marked a duplicate of bug 741869 Unity/compiz intercepts Super and Alt keypresses from grabbed windows like VMs. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gnome-control-center in Ubuntu. https://bugs.launchpad.net/bugs/994346 Title: Custom Shortcuts with Super Key do not work Status in “gnome-control-center” package in Ubuntu: Confirmed Bug description: I created shortcuts including the Super key like Super+C for gcalctool. Now my Custom Shortcuts do not work since the upgrade to Precise. In the keyboard layout view i can see the Super key blink when i press it. I'm using the classic mode gnome-session-fallback. ProblemType: Bug DistroRelease: Ubuntu 12.04 Package: gnome-control-center 1:3.4.1-0ubuntu1 ProcVersionSignature: Ubuntu 3.2.0-24.37-generic 3.2.14 Uname: Linux 3.2.0-24-generic i686 ApportVersion: 2.0.1-0ubuntu7 Architecture: i386 Date: Fri May 4 03:15:46 2012 EcryptfsInUse: Yes ExecutablePath: /usr/bin/gnome-control-center SourcePackage: gnome-control-center UpgradeStatus: Upgraded to precise on 2012-04-26 (7 days ago) usr_lib_gnome-control-center: activity-log-manager-control-center 0.9.4-0ubuntu3 deja-dup22.0-0ubuntu2 gnome-bluetooth 3.2.2-0ubuntu5 indicator-datetime 0.3.94-0ubuntu2 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-control-center/+bug/994346/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 951805] Re: Can't use Super_L in keyboard shortcuts
*** This bug is a duplicate of bug 741869 *** https://bugs.launchpad.net/bugs/741869 ** This bug is no longer a duplicate of bug 950160 Unity blocks other programs from binding globally to Super+* (* = any key) ** This bug has been marked a duplicate of bug 741869 Unity/compiz intercepts Super and Alt keypresses from grabbed windows like VMs. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gnome-control-center in Ubuntu. Matching subscriptions: dp-unity https://bugs.launchpad.net/bugs/951805 Title: Can't use Super_L in keyboard shortcuts Status in “gnome-control-center” package in Ubuntu: Confirmed Status in “unity” package in Ubuntu: Confirmed Bug description: 12.04 Beta1 Super+T seems to be bound to opening the Trash folder, but that doesn't show up as one of the keyboard shortcuts in gnome-control- center. When I try set the 'Launch Terminal' shortcut to Super+T the result is that Super+T still opens the trash folder. Setting other shortcuts to Super+ also doesn't change the behaviour of those key combinations. To reproduce: Launch System Settings (or gnome-control-center), go to 'Keyboard', click on the 'Shortcuts' tab, and set a launcher to Super+. Hitting Super alone opens the Unity search menu as usual. ProblemType: Bug DistroRelease: Ubuntu 12.04 Package: gnome-control-center 1:3.3.90-0ubuntu4 ProcVersionSignature: Ubuntu 3.2.0-17.27-generic 3.2.6 Uname: Linux 3.2.0-17-generic x86_64 ApportVersion: 1.93-0ubuntu2 Architecture: amd64 Date: Sat Mar 10 15:39:55 2012 InstallationMedia: Ubuntu 12.04 LTS "Precise Pangolin" - Beta amd64 (20120301) ProcEnviron: LANGUAGE=en_CA:en PATH=(custom, no user) LANG=en_CA.UTF-8 SHELL=/bin/bash SourcePackage: gnome-control-center UpgradeStatus: No upgrade log present (probably fresh install) usr_lib_gnome-control-center: activity-log-manager-control-center 0.9.2-0ubuntu2 deja-dup21.90-0ubuntu1 gnome-bluetooth 3.2.2-0ubuntu2 indicator-datetime 0.3.90-0ubuntu1 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-control-center/+bug/951805/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 989911] Re: alt tab in vm messes with HUD
*** This bug is a duplicate of bug 741869 *** https://bugs.launchpad.net/bugs/741869 ** This bug is no longer a duplicate of bug 950160 Unity blocks other programs from binding globally to Super+* (* = any key) ** This bug has been marked a duplicate of bug 741869 Unity/compiz intercepts Super and Alt keypresses from grabbed windows like VMs. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to unity-2d in Ubuntu. Matching subscriptions: dp-unity2d https://bugs.launchpad.net/bugs/989911 Title: alt tab in vm messes with HUD Status in “unity-2d” package in Ubuntu: New Bug description: I have a connection remmina open to another desktop, while using that I will alt-tab windows and it is fine. Once I click on something in the launcher Ubuntu will switch to the local app but pops up the HUD search thing as if I had pressed 'alt'. IMO this should not come up as it is a PITA and takes focus instead of the window I clicked on having focus. ProblemType: Bug DistroRelease: Ubuntu 12.04 Package: unity 5.10.0-0ubuntu6 ProcVersionSignature: Ubuntu 3.2.0-23.36-generic 3.2.14 Uname: Linux 3.2.0-23-generic x86_64 NonfreeKernelModules: nvidia ApportVersion: 2.0.1-0ubuntu6 Architecture: amd64 CompizPlugins: [core,composite,opengl,compiztoolbox,decor,vpswitch,snap,mousepoll,resize,place,move,wall,grid,regex,imgpng,session,gnomecompat,animation,fade,unitymtgrabhandles,workarounds,scale,expo,ezoom,unityshell] Date: Fri Apr 27 17:50:33 2012 InstallationMedia: Ubuntu 12.04 LTS "Precise Pangolin" - Beta amd64 (20120328) ProcEnviron: LANGUAGE=en_GB:en TERM=xterm PATH=(custom, no user) LANG=en_GB.UTF-8 SHELL=/bin/bash SourcePackage: unity UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/unity-2d/+bug/989911/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1218294] Re: [dialer app] During a live call, there's no volume adjustment available
That's a little weird - I have tested Nexus 4 today (with an image from a few days ago), and I think the call volume is quite ok. (But it's difficult to verify when you're calling yourself for the testing.) -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to pulseaudio in Ubuntu. https://bugs.launchpad.net/bugs/1218294 Title: [dialer app] During a live call, there's no volume adjustment available Status in Dialer app for Ubuntu Touch: New Status in Ubuntu UX bugs: Fix Committed Status in “dialer-app” package in Ubuntu: New Status in “ofono” package in Ubuntu: Invalid Status in “pulseaudio” package in Ubuntu: Incomplete Bug description: Current situation: Can't adjust the voice volume during a live call, making it difficult to hear the receiver Desired: Can adjust volume during a live call (Eg using the volume buttons on the device) To manage notifications about this bug go to: https://bugs.launchpad.net/dialer-app/+bug/1218294/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1196752] Re: Suspend only works once when using upower with logind -- s-shim needs to call /lib/systemd/system-sleep/*
This bug has been reported on the Ubuntu ISO testing tracker. A list of all reports related to this bug can be found here: http://iso.qa.ubuntu.com/qatracker/reports/bugs/1196752 ** Tags added: iso-testing -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to upower in Ubuntu. https://bugs.launchpad.net/bugs/1196752 Title: Suspend only works once when using upower with logind -- s-shim needs to call /lib/systemd/system-sleep/* Status in “systemd” package in Ubuntu: Invalid Status in “systemd-shim” package in Ubuntu: Confirmed Status in “upower” package in Ubuntu: Fix Released Status in “upower” package in Debian: Fix Released Bug description: On saucy with upower 0.9.20-1ubuntu2, suspending via UPower (or the KDE suspend menu) only works once: dbus-send --print-reply --system --dest=org.freedesktop.UPower /org/freedesktop/UPower org.freedesktop.UPower.Suspend and resuming works the first time. However, calling it again after resume returns: "Sleep has already been requested and is pending" Sleeping directly via logind works every time: dbus-send --print-reply --system --dest=org.freedesktop.login1 /org/freedesktop/login1 org.freedesktop.login1.Manager.Suspend boolean:true Returning FALSE for the LOGIND_AVAILABLE() case in gboolean up_backend_emits_resuming (UpBackend *backend) in src/linux/up- backend.c allows suspending multiple times via UPower (or the KDE suspend menu). UPower is somehow not getting the resume signal from logind. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/systemd/+bug/1196752/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1219983] Re: Sync blt 2.4z-6 (main) from Debian unstable (main)
by now, this has already been synced
** Changed in: blt (Ubuntu)
Status: New => Fix Released
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to blt in Ubuntu.
https://bugs.launchpad.net/bugs/1219983
Title:
Sync blt 2.4z-6 (main) from Debian unstable (main)
Status in “blt” package in Ubuntu:
Fix Released
Bug description:
Please sync blt 2.4z-6 (main) from Debian unstable (main)
Explanation of the Ubuntu delta and why it can be dropped:
* Build using Tk 8.5 installed in a multiarch location.
* Stop building for Tk 8.4. LP: #1155269.
The Tk changes were merged into Debian, so the delta is no longer necessary.
Changelog entries since current saucy version 2.4z-5ubuntu2:
blt (2.4z-6) unstable; urgency=low
* QA upload, orphan the package.
[ Paul E. Johnson ]
* Fix zooming (Closes: #524149)
* Fix crash in wish (Closes: #636629)
* Version 2.4z-6 introduces quilt-3.0 patches.
* Changes in control and rules file to silence lintian warnings.
* 02-debian-all.diff includes all of the changes that were applied
to the source code by previous packager. Almost all of the changes
are corrections in spelling in the blt documentation and examples.
* Apply 3 changes based on revisions developed by the fedora linux team.
+ 03-fedora-patch-2.diff
+ 04-fedora-tk8.5.6.patch.diff
+ 05-tk8.5-zoomstack.diff
* Those patches are required to solve segmentation faults that are observed
when blt is used with tcltk 8.5. We have a substantial amount of
experience using this patched version of blt in the Swarm
Simulation System (www.swarm.org) and have observed no ill-effects.
* new patches for man page cleanups to silence lintian warningss.
* patch configure according to Debian hardening policy.
[ Georges Khaznadar ]
* changed the source format to 3.0 (quilt)
* modified every diff file in debian/patches to comply with the
build tools
* checked that the package is built successfully
* modified Standards-Version -> 3.9.4, comptaibility level -> 9
* added a build-depedency on quilt and ${misc:Depends} clauses
* changed the build-depedency on debhelper (now: >= 9)
* set the urgency flag to low (normal is not allowed)
* removed the leading article in blt-dev's and blt-demo's description lines
[ Matthias Klose ]
* Allow to build using Tcl/Tk 8.5 installed in a multiarch location.
* Stop building for Tk 8.4.
* Allow parallel builds.
-- Matthias Klose Fri, 30 Aug 2013 11:13:17 +0200
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/blt/+bug/1219983/+subscriptions
--
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1221219] Re: system-config-printer fails to launch. Gives ImportError.
Jack, thank you very much. I will make this package a dependency of system-config-printer. ** Changed in: system-config-printer (Ubuntu) Status: Incomplete => Triaged -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to system-config-printer in Ubuntu. https://bugs.launchpad.net/bugs/1221219 Title: system-config-printer fails to launch. Gives ImportError. Status in “system-config-printer” package in Ubuntu: Triaged Bug description: Xubuntu 13.10 beta 1 development. Settings Manager->Printers does not open Running system-config-printer from terminal gives following error: jack@jack-sb13:~$ system-config-printer ** (system-config-printer.py:1603): WARNING **: Couldn't connect to accessibility bus: Failed to connect to socket /tmp/dbus-iWKUtlwWVF: Connection refused ERROR:root:Could not find any typelib for Notify Traceback (most recent call last): File "/usr/share/system-config-printer/system-config-printer.py", line 73, in import jobviewer File "/usr/share/system-config-printer/jobviewer.py", line 27, in from gi.repository import Notify ImportError: cannot import name Notify ProblemType: Bug DistroRelease: Ubuntu 13.10 Package: system-config-printer-gnome 1.4.2-0ubuntu1 ProcVersionSignature: Ubuntu 3.11.0-4.9-generic 3.11.0-rc7 Uname: Linux 3.11.0-4-generic i686 ApportVersion: 2.12.1-0ubuntu3 Architecture: i386 CupsErrorLog: CurrentDmesg: [4.338652] r8169 :04:00.0 eth0: link up [4.338660] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Date: Thu Sep 5 09:14:54 2013 InstallationDate: Installed on 2013-09-04 (1 days ago) InstallationMedia: Xubuntu 13.10 "Saucy Salamander" - Alpha i386 (20130902.1) Lpstat: device for DESKJET-940C: ipp://jack-xubuntu.local:631/printers/DESKJET-940C device for DESKJET-940C-Test: ipp://192.168.1.2:631/printers/DESKJET-940C-Test MachineType: Dell Inc. Inspiron 660s MarkForUpload: True PackageArchitecture: all Papersize: letter ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-4-generic root=UUID=36996f3e-a233-490c-a5c5-d066ac163c2f ro quiet splash SourcePackage: system-config-printer UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 11/22/2012 dmi.bios.vendor: Dell Inc. dmi.bios.version: A09 dmi.board.name: 0XFWHV dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 3 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvrA09:bd11/22/2012:svnDellInc.:pnInspiron660s:pvr:rvnDellInc.:rn0XFWHV:rvrA00:cvnDellInc.:ct3:cvr: dmi.product.name: Inspiron 660s dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/system-config-printer/+bug/1221219/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 713210] Re: texlive-pictures package should depend on ruby
** Changed in: texlive-base (Debian) Status: New => Fix Released -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to texlive-base in Ubuntu. https://bugs.launchpad.net/bugs/713210 Title: texlive-pictures package should depend on ruby Status in “texlive-base” package in Ubuntu: Confirmed Status in “texlive-base” package in Debian: Fix Released Bug description: Binary package hint: texlive-base Hi, Package texlive-pictures does not depends (or recommends) ruby. However, I found that /usr/bin/epspdf and /usr/bin/epspdftk depends on ruby. I do have ruby1.9.1 installed, but both scripts call "ruby" directly and ruby1.9.1 provides the command "ruby1.9.1". Thanks, Daniel ProblemType: Bug DistroRelease: Ubuntu 10.10 Package: texlive-pictures 2009-10 ProcVersionSignature: Ubuntu 2.6.35-26.46-generic 2.6.35.10 Uname: Linux 2.6.35-26-generic i686 NonfreeKernelModules: nvidia Architecture: i386 Date: Fri Feb 4 14:45:20 2011 PackageArchitecture: all ProcEnviron: SHELL=/bin/bash PATH=(custom, user) LANG=pt_BR.utf8 LANGUAGE=pt_BR:en SourcePackage: texlive-base To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/texlive-base/+bug/713210/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1220552] Re: App Armor denies access, despite appropriate security policy groups in manifest
** Attachment removed: "com.wellsb.blackjack-app_0.0.1_all.click" https://bugs.launchpad.net/ubuntu/+source/libaccounts-glib/+bug/1220552/+attachment/3802397/+files/com.wellsb.blackjack-app_0.0.1_all.click -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to libaccounts-glib in Ubuntu. https://bugs.launchpad.net/bugs/1220552 Title: App Armor denies access, despite appropriate security policy groups in manifest Status in Online Accounts: libaccounts-glib: Unknown Status in “apparmor-easyprof-ubuntu” package in Ubuntu: Fix Released Status in “libaccounts-glib” package in Ubuntu: In Progress Status in “apparmor-easyprof-ubuntu” source package in Saucy: Fix Released Status in “libaccounts-glib” source package in Saucy: In Progress Bug description: My application does not play audio or have access to Online Accounts when run under app armor on a N4. Everything works fine if I qmlscene the file located in /opt directly. My manifest has networking, audio, and accounts. System Log: Sep 4 07:07:09 ubuntu-phablet kernel: [30790.164043] type=1400 audit(1378278429.378:2806): apparmor="DENIED" operation="open" parent=716 profile="com.wellsb.blackjack-app_blackjack-app_0.0.1" name="/home/phablet/.gstreamer-0.10/registry.arm.bin" pid=24322 comm="qmlscene" requested_mask="r" denied_mask="r" fsuid=32011 ouid=32011 Sep 4 07:07:09 ubuntu-phablet kernel: [30790.164195] type=1400 audit(1378278429.378:2807): apparmor="DENIED" operation="open" parent=716 profile="com.wellsb.blackjack-app_blackjack-app_0.0.1" name="/home/phablet/.gstreamer-0.10/registry.arm.bin" pid=24322 comm="qmlscene" requested_mask="r" denied_mask="r" fsuid=32011 ouid=32011 Sep 4 07:07:10 ubuntu-phablet kernel: [30791.353025] type=1400 audit(1378278430.559:2808): apparmor="DENIED" operation="mknod" parent=716 profile="com.wellsb.blackjack-app_blackjack-app_0.0.1" name="/home/phablet/.gstreamer-0.10/registry.arm.bin.tmpIL852W" pid=24322 comm="qmlscene" requested_mask="c" denied_mask="c" fsuid=32011 ouid=32011 Sep 4 07:07:10 ubuntu-phablet kernel: [30791.353208] type=1400 audit(1378278430.559:2809): apparmor="DENIED" operation="mknod" parent=716 profile="com.wellsb.blackjack-app_blackjack-app_0.0.1" name="/home/phablet/.gstreamer-0.10/registry.arm.bin.tmpC6652W" pid=24322 comm="qmlscene" requested_mask="c" denied_mask="c" fsuid=32011 ouid=32011 Sep 4 07:07:11 ubuntu-phablet kernel: [30791.811075] type=1400 audit(1378278431.009:2810): apparmor="DENIED" operation="open" parent=716 profile="com.wellsb.blackjack-app_blackjack-app_0.0.1" name="/home/phablet/.config/libaccounts-glib/accounts.db" pid=24322 comm="qmlscene" requested_mask="rwc" denied_mask="rwc" fsuid=32011 ouid=32011 Sep 4 07:07:11 ubuntu-phablet kernel: [30791.811136] type=1400 audit(1378278431.009:2811): apparmor="DENIED" operation="open" parent=716 profile="com.wellsb.blackjack-app_blackjack-app_0.0.1" name="/home/phablet/.config/libaccounts-glib/accounts.db" pid=24322 comm="qmlscene" requested_mask="r" denied_mask="r" fsuid=32011 ouid=32011 Sep 4 07:07:11 ubuntu-phablet kernel: [30791.845685] type=1400 audit(1378278431.049:2812): apparmor="DENIED" operation="open" parent=716 profile="com.wellsb.blackjack-app_blackjack-app_0.0.1" name="/run/shm/" pid=24322 comm="qmlscene" requested_mask="r" denied_mask="r" fsuid=32011 ouid=0 Sep 4 07:07:11 ubuntu-phablet kernel: [30791.846387] type=1400 audit(1378278431.049:2813): apparmor="DENIED" operation="open" parent=716 profile="com.wellsb.blackjack-app_blackjack-app_0.0.1" name="/run/shm/" pid=24322 comm="qmlscene" requested_mask="r" denied_mask="r" fsuid=32011 ouid=0 Sep 4 07:07:11 ubuntu-phablet kernel: [30791.847119] type=1400 audit(1378278431.049:2814): apparmor="DENIED" operation="chown" parent=716 profile="com.wellsb.blackjack-app_blackjack-app_0.0.1" name="/run/user/32011/pulse/" pid=24322 comm="qmlscene" requested_mask="w" denied_mask="w" fsuid=32011 ouid=32011 Sep 4 07:07:11 ubuntu-phablet kernel: [30791.847180] type=1400 audit(1378278431.049:2815): apparmor="DENIED" operation="rmdir" parent=716 profile="com.wellsb.blackjack-app_blackjack-app_0.0.1" name="/run/user/32011/pulse/" pid=24322 comm="qmlscene" requested_mask="d" denied_mask="d" fsuid=32011 ouid=32011 To manage notifications about this bug go to: https://bugs.launchpad.net/libaccounts-glib/+bug/1220552/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1167301] Re: 8086:0166 [ThinkPad Twist S230u 3347] REGRESSION: Mirroring display works only with 1024x768 (4:3) whereas my laptop has 1366x768 (16:9) & external monitor 1920x10
** Tags removed: needs-bisect ** Tags added: performing-bisect -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xorg-server in Ubuntu. https://bugs.launchpad.net/bugs/1167301 Title: 8086:0166 [ThinkPad Twist S230u 3347] REGRESSION: Mirroring display works only with 1024x768 (4:3) whereas my laptop has 1366x768 (16:9) & external monitor 1920x1080 (16:9) Status in “linux” package in Ubuntu: Incomplete Status in “xorg-server” package in Ubuntu: Invalid Bug description: I have a Lenovo Thinkpad Twist with an internal 1366x768 (16:9) display and I have connected and external 1920x1080 (16:9) monitor via HDMI. By default the display gets mirrored with only 1024x768 (4:3) because this is the highest common resolution of the two reported by xrandr. I can switch to a large desktop formed by the two screens with the System Settings (section "Display") with each screen using its native resolution. This is a kernel regression from 3.8.0-7-generic to 3.8.0-19. I can mirror with a higher resolution running the commands: xrandr --addmode HDMI1 1366x768 xrandr --output HDMI1 --mode 1366x768 xrandr --output HDMI1 --mode 1366x768 --same-as LVDS1 This is rather awkward when using a projector. The problem also persists when connecting the external screen to the Mini DisplayPort (with adapter) instead of to the HDMI. I did not test with 12.10 by myself, but according to the comment from Gizmo Chicken below this worked correctly under 12.10, so this is a regression and not a feature request. The output of "xrandr --prop" with both screens connected in large- desktop-over-both-screens mode (no mirroring): Screen 0: minimum 320 x 200, current 3286 x 1080, maximum 32767 x 32767 LVDS1 connected 1366x768+0+0 (normal left inverted right x axis y axis) 277mm x 156mm EDID: 000030e47a03 00160103801c10780adce5975a559227 1d50540001010101010101010101 010101010101241d56d4500016303020 2500159c101b 00fe004c 4720446973706c61790a202000fe 004c503132355748322d534c54310025 BACKLIGHT: 1054 (0x041e) range: (0,1054) Backlight: 1054 (0x041e) range: (0,1054) scaling mode:Full aspect supported: None Full Center Full aspect 1366x768 59.8*+ 1360x768 59.8 60.0 1024x768 60.0 800x600 60.3 56.2 640x480 59.9 VGA1 disconnected (normal left inverted right x axis y axis) HDMI1 connected 1920x1080+1366+0 (normal left inverted right x axis y axis) 510mm x 287mm EDID: 000015c3692001010101 2d14010380331d78eaee95a3544c9926 0f5054a1080081808140b30081c00101 010101010101023a801871382d40582c 4500fe1f111e00ff00353732 32393131300a2020202000fc0045 563233570a202020202000fd 003b3d1f440f000a2020202020200153 02031b41468102031112042309070783 0167030c001300881e8c0ad08a20 e02d10103e9600040300188c0ad0 8a20e02d10103e9600100900188c 0ad090204031200c405500040300 188c0ad090204031200c405500100900 18011d007251d01e206e28550010 09001e5c Broadcast RGB: Automatic supported: Automatic Full Limited 16:2 audio: auto supported: force-dvi off auto on 1920x1080 60.0*+ 1680x1050 59.9 1280x1024 60.0 1280x960 60.0 1280x720 60.0 1024x768 60.0 800x600 60.3 720x576 50.0 720x480 59.9 640x480 60.0 59.9 720x400 70.1 DP1 disconnected (normal left inverted right x axis y axis) Broadcast RGB: Automatic supported: Automatic Full Limited 16:2 audio: auto supported: force-dvi off auto on HDMI2 disconnected (normal left inverted right x axis y axis) Broadcast RGB: Automatic supported: Automatic Full Limited 16:2 audio: auto supported: force-dvi off auto on DP2 disconnected (normal left inverted right x axis y axis) Broadcast RGB: Automatic supported: Automatic Full Limited 16:2 audio: auto supported: force-dvi off auto on --- .tmp.unity.support.test.0: ApportVersion: 2.9.2-0ubuntu5 Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: compiz CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0' CompositorUnredirectFSW: true DistUpgraded: Fresh install DistroCodename: raring DistroRelease: Ubuntu 13.04 DistroVariant: ubuntu ExtraDebuggingInterest: Yes GraphicsCard: Intel Corporation 3rd Gen Core processor Graphics Controller [8086:0166] (rev 09) (prog-if 00 [VGA controller]) Subsystem: Lenovo Device [17aa:2205] InstallationDate: Installed on 2013-03-28 (12 days ago) InstallationMedia: Ubuntu 13.04 "Raring Ringtail" - Alpha amd64 (20130328) MachineType: LENOVO 334729G MarkForUpload: True Package: x
[Desktop-packages] [Bug 1221219] Re: system-config-printer fails to launch. Gives ImportError.
Please run the following command in a terminal window: sudo apt-get install gir1.2-notify-0.7 Then try to start system-config-printer again. Does this solve the problem? ** Changed in: system-config-printer (Ubuntu) Status: Confirmed => Incomplete -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to system-config-printer in Ubuntu. https://bugs.launchpad.net/bugs/1221219 Title: system-config-printer fails to launch. Gives ImportError. Status in “system-config-printer” package in Ubuntu: Incomplete Bug description: Xubuntu 13.10 beta 1 development. Settings Manager->Printers does not open Running system-config-printer from terminal gives following error: jack@jack-sb13:~$ system-config-printer ** (system-config-printer.py:1603): WARNING **: Couldn't connect to accessibility bus: Failed to connect to socket /tmp/dbus-iWKUtlwWVF: Connection refused ERROR:root:Could not find any typelib for Notify Traceback (most recent call last): File "/usr/share/system-config-printer/system-config-printer.py", line 73, in import jobviewer File "/usr/share/system-config-printer/jobviewer.py", line 27, in from gi.repository import Notify ImportError: cannot import name Notify ProblemType: Bug DistroRelease: Ubuntu 13.10 Package: system-config-printer-gnome 1.4.2-0ubuntu1 ProcVersionSignature: Ubuntu 3.11.0-4.9-generic 3.11.0-rc7 Uname: Linux 3.11.0-4-generic i686 ApportVersion: 2.12.1-0ubuntu3 Architecture: i386 CupsErrorLog: CurrentDmesg: [4.338652] r8169 :04:00.0 eth0: link up [4.338660] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Date: Thu Sep 5 09:14:54 2013 InstallationDate: Installed on 2013-09-04 (1 days ago) InstallationMedia: Xubuntu 13.10 "Saucy Salamander" - Alpha i386 (20130902.1) Lpstat: device for DESKJET-940C: ipp://jack-xubuntu.local:631/printers/DESKJET-940C device for DESKJET-940C-Test: ipp://192.168.1.2:631/printers/DESKJET-940C-Test MachineType: Dell Inc. Inspiron 660s MarkForUpload: True PackageArchitecture: all Papersize: letter ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-4-generic root=UUID=36996f3e-a233-490c-a5c5-d066ac163c2f ro quiet splash SourcePackage: system-config-printer UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 11/22/2012 dmi.bios.vendor: Dell Inc. dmi.bios.version: A09 dmi.board.name: 0XFWHV dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 3 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvrA09:bd11/22/2012:svnDellInc.:pnInspiron660s:pvr:rvnDellInc.:rn0XFWHV:rvrA00:cvnDellInc.:ct3:cvr: dmi.product.name: Inspiron 660s dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/system-config-printer/+bug/1221219/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1075923] Re: nautilus hangs copying large directories from a samba share
+1 to the slow PC problem. My loan laptop is a celeron 1.6ghz, 2gb RAM. This is really inconvenient when I am using this laptop at school as I sometimes need to copy large shared folders to our hard drives for use out-of-school, and copying each file induvidually and recreating directory structures is very time consuming -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gvfs in Ubuntu. https://bugs.launchpad.net/bugs/1075923 Title: nautilus hangs copying large directories from a samba share Status in GVFS: Confirmed Status in “gvfs” package in Ubuntu: Triaged Bug description: Problem === Copying files to and from samba shares (this includes Windows shares) is unreliable in Ubuntu 12.10 and Ubuntu 13.04 when using nautilus' integrated samba client (gvfs-smb): The copy randomly hangs after a few files or a few GB. Workaround == Until gvfs-smb is fixed, use the kernel samba client (cifs) that works reliably, is faster, but needs some terminal commands to get going: # sudo -s # mkdir /mnt/cifs # mount -t cifs -o user=YOUR_SAMBA_USER -o uid=YOUR_LINUX_USER "//SAMBA_SERVER/SAMBA_SHARE" /mnt/cifs It will ask for you password, you can then access the shared files at /mnt/cifs. To manage notifications about this bug go to: https://bugs.launchpad.net/gvfs/+bug/1075923/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1221318] [NEW] pidgin crashed with SIGSEGV in g_idle_dispatch()
Public bug reported: I was trying to connect pidging to lync using the sipe plugin when it crashed.The windows closed and it indicate in the console : "core dumped". ProblemType: Crash DistroRelease: Ubuntu 13.10 Package: pidgin 1:2.10.7-0ubuntu4.1 ProcVersionSignature: Ubuntu 3.11.0-4.9-generic 3.11.0-rc7 Uname: Linux 3.11.0-4-generic i686 ApportVersion: 2.12.1-0ubuntu3 Architecture: i386 Date: Thu Sep 5 18:12:43 2013 Disassembly: => 0xb5dc7820: Cannot access memory at address 0xb5dc7820 ExecutablePath: /usr/bin/pidgin InstallationDate: Installed on 2013-08-05 (31 days ago) InstallationMedia: Lubuntu 13.10 "Saucy Salamander" - Alpha i386 (20130804) MarkForUpload: True ProcCmdline: pidgin SegvAnalysis: Segfault happened at: 0xb5dc7820: Cannot access memory at address 0xb5dc7820 PC (0xb5dc7820) not located in a known VMA region (needed executable region)! SegvReason: executing unknown VMA Signal: 11 SourcePackage: pidgin StacktraceTop: ?? () g_idle_dispatch (source=source@entry=0xb808afc8, callback=0xb5dc7820, user_data=0xb8013d78) at /build/buildd/glib2.0-2.37.6/./glib/gmain.c:5250 g_main_dispatch (context=0xb7904538, context@entry=0xb79c0ca0) at /build/buildd/glib2.0-2.37.6/./glib/gmain.c:3065 g_main_context_dispatch (context=context@entry=0xb7904538) at /build/buildd/glib2.0-2.37.6/./glib/gmain.c:3641 g_main_context_iterate (context=0xb7904538, block=block@entry=1, dispatch=dispatch@entry=1, self=) at /build/buildd/glib2.0-2.37.6/./glib/gmain.c:3712 Title: pidgin crashed with SIGSEGV in g_idle_dispatch() UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dialout dip lpadmin plugdev sambashare sudo uucp ** Affects: pidgin (Ubuntu) Importance: Undecided Status: New ** Tags: apport-crash i386 need-i386-retrace saucy ** Information type changed from Private to Public -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to pidgin in Ubuntu. https://bugs.launchpad.net/bugs/1221318 Title: pidgin crashed with SIGSEGV in g_idle_dispatch() Status in “pidgin” package in Ubuntu: New Bug description: I was trying to connect pidging to lync using the sipe plugin when it crashed.The windows closed and it indicate in the console : "core dumped". ProblemType: Crash DistroRelease: Ubuntu 13.10 Package: pidgin 1:2.10.7-0ubuntu4.1 ProcVersionSignature: Ubuntu 3.11.0-4.9-generic 3.11.0-rc7 Uname: Linux 3.11.0-4-generic i686 ApportVersion: 2.12.1-0ubuntu3 Architecture: i386 Date: Thu Sep 5 18:12:43 2013 Disassembly: => 0xb5dc7820: Cannot access memory at address 0xb5dc7820 ExecutablePath: /usr/bin/pidgin InstallationDate: Installed on 2013-08-05 (31 days ago) InstallationMedia: Lubuntu 13.10 "Saucy Salamander" - Alpha i386 (20130804) MarkForUpload: True ProcCmdline: pidgin SegvAnalysis: Segfault happened at: 0xb5dc7820:Cannot access memory at address 0xb5dc7820 PC (0xb5dc7820) not located in a known VMA region (needed executable region)! SegvReason: executing unknown VMA Signal: 11 SourcePackage: pidgin StacktraceTop: ?? () g_idle_dispatch (source=source@entry=0xb808afc8, callback=0xb5dc7820, user_data=0xb8013d78) at /build/buildd/glib2.0-2.37.6/./glib/gmain.c:5250 g_main_dispatch (context=0xb7904538, context@entry=0xb79c0ca0) at /build/buildd/glib2.0-2.37.6/./glib/gmain.c:3065 g_main_context_dispatch (context=context@entry=0xb7904538) at /build/buildd/glib2.0-2.37.6/./glib/gmain.c:3641 g_main_context_iterate (context=0xb7904538, block=block@entry=1, dispatch=dispatch@entry=1, self=) at /build/buildd/glib2.0-2.37.6/./glib/gmain.c:3712 Title: pidgin crashed with SIGSEGV in g_idle_dispatch() UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dialout dip lpadmin plugdev sambashare sudo uucp To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/pidgin/+bug/1221318/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1221317] [NEW] Archive Manager doesn't respond
Public bug reported: Open context menu of a tar.gz and select the Archive Manager. Archive Manager opens but you can't select the file nor extract it. Not possible to close the Archive Manager either. You can maximize an minimize it. Nothing else Ubuntu Saucy Salamanter (development branch) Release 13.10 Archive Manager 3.9.90-ubuntu1 ProblemType: Bug DistroRelease: Ubuntu 13.10 Package: file-roller 3.9.90-0ubuntu1 ProcVersionSignature: Ubuntu 3.11.0-4.9-generic 3.11.0-rc7 Uname: Linux 3.11.0-4-generic i686 ApportVersion: 2.12.1-0ubuntu3 Architecture: i386 Date: Thu Sep 5 17:05:32 2013 ExecutablePath: /usr/bin/file-roller InstallationDate: Installed on 2013-09-05 (0 days ago) InstallationMedia: Lubuntu 13.10 "Saucy Salamander" - Alpha i386 (20130902.1) MarkForUpload: True ProcEnviron: LANGUAGE=en_GB:en PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_GB.UTF-8 SHELL=/bin/bash SourcePackage: file-roller UpgradeStatus: No upgrade log present (probably fresh install) ** Affects: file-roller (Ubuntu) Importance: Undecided Status: New ** Tags: apport-bug i386 saucy -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to file-roller in Ubuntu. https://bugs.launchpad.net/bugs/1221317 Title: Archive Manager doesn't respond Status in “file-roller” package in Ubuntu: New Bug description: Open context menu of a tar.gz and select the Archive Manager. Archive Manager opens but you can't select the file nor extract it. Not possible to close the Archive Manager either. You can maximize an minimize it. Nothing else Ubuntu Saucy Salamanter (development branch) Release 13.10 Archive Manager 3.9.90-ubuntu1 ProblemType: Bug DistroRelease: Ubuntu 13.10 Package: file-roller 3.9.90-0ubuntu1 ProcVersionSignature: Ubuntu 3.11.0-4.9-generic 3.11.0-rc7 Uname: Linux 3.11.0-4-generic i686 ApportVersion: 2.12.1-0ubuntu3 Architecture: i386 Date: Thu Sep 5 17:05:32 2013 ExecutablePath: /usr/bin/file-roller InstallationDate: Installed on 2013-09-05 (0 days ago) InstallationMedia: Lubuntu 13.10 "Saucy Salamander" - Alpha i386 (20130902.1) MarkForUpload: True ProcEnviron: LANGUAGE=en_GB:en PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_GB.UTF-8 SHELL=/bin/bash SourcePackage: file-roller UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/file-roller/+bug/1221317/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1221303] [NEW] Duplicity backup fails with "unknown error"
Public bug reported: Contents of backup window show: Traceback (most recent call last): File "/usr/bin/duplicity", line 1411, in with_tempdir(main) File "/usr/bin/duplicity", line 1404, in with_tempdir fn() File "/usr/bin/duplicity", line 1338, in main restore(col_stats) File "/usr/bin/duplicity", line 632, in restore restore_get_patched_rop_iter(col_stats)): File "/usr/lib/python2.7/dist-packages/duplicity/patchdir.py", line 526, in Write_ROPaths for ropath in rop_iter: File "/usr/lib/python2.7/dist-packages/duplicity/patchdir.py", line 499, in integrate_patch_iters final_ropath = patch_seq2ropath( normalize_ps( patch_seq ) ) File "/usr/lib/python2.7/dist-packages/duplicity/patchdir.py", line 466, in patch_seq2ropath assert len( patch_seq ) == 1, len( patch_seq ) AssertionError: 2 ProblemType: Bug DistroRelease: Ubuntu 13.04 Package: deja-dup 26.0-0ubuntu1 ProcVersionSignature: Ubuntu 3.8.0-29.42-generic 3.8.13.5 Uname: Linux 3.8.0-29-generic x86_64 ApportVersion: 2.9.2-0ubuntu8.3 Architecture: amd64 Date: Thu Sep 5 10:57:18 2013 InstallationDate: Installed on 2013-08-29 (7 days ago) InstallationMedia: Ubuntu 13.04 "Raring Ringtail" - Release amd64 (20130424) MarkForUpload: True ProcEnviron: TERM=xterm PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash SourcePackage: deja-dup UpgradeStatus: No upgrade log present (probably fresh install) ** Affects: deja-dup (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug raring -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to deja-dup in Ubuntu. https://bugs.launchpad.net/bugs/1221303 Title: Duplicity backup fails with "unknown error" Status in “deja-dup” package in Ubuntu: New Bug description: Contents of backup window show: Traceback (most recent call last): File "/usr/bin/duplicity", line 1411, in with_tempdir(main) File "/usr/bin/duplicity", line 1404, in with_tempdir fn() File "/usr/bin/duplicity", line 1338, in main restore(col_stats) File "/usr/bin/duplicity", line 632, in restore restore_get_patched_rop_iter(col_stats)): File "/usr/lib/python2.7/dist-packages/duplicity/patchdir.py", line 526, in Write_ROPaths for ropath in rop_iter: File "/usr/lib/python2.7/dist-packages/duplicity/patchdir.py", line 499, in integrate_patch_iters final_ropath = patch_seq2ropath( normalize_ps( patch_seq ) ) File "/usr/lib/python2.7/dist-packages/duplicity/patchdir.py", line 466, in patch_seq2ropath assert len( patch_seq ) == 1, len( patch_seq ) AssertionError: 2 ProblemType: Bug DistroRelease: Ubuntu 13.04 Package: deja-dup 26.0-0ubuntu1 ProcVersionSignature: Ubuntu 3.8.0-29.42-generic 3.8.13.5 Uname: Linux 3.8.0-29-generic x86_64 ApportVersion: 2.9.2-0ubuntu8.3 Architecture: amd64 Date: Thu Sep 5 10:57:18 2013 InstallationDate: Installed on 2013-08-29 (7 days ago) InstallationMedia: Ubuntu 13.04 "Raring Ringtail" - Release amd64 (20130424) MarkForUpload: True ProcEnviron: TERM=xterm PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash SourcePackage: deja-dup UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/deja-dup/+bug/1221303/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1221219] Re: system-config-printer fails to launch. Gives ImportError.
This bug was fixed in the package system-config-printer - 1.4.2-0ubuntu2 --- system-config-printer (1.4.2-0ubuntu2) saucy; urgency=low * debian/control: Let system-config-printer-gnome depend on gir1.2-notify-0.7 (LP: #1221219). -- Till KamppeterThu, 5 Sep 2013 17:23:59 +0200 ** Changed in: system-config-printer (Ubuntu) Status: Fix Committed => Fix Released -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to system-config-printer in Ubuntu. https://bugs.launchpad.net/bugs/1221219 Title: system-config-printer fails to launch. Gives ImportError. Status in “system-config-printer” package in Ubuntu: Fix Released Bug description: Xubuntu 13.10 beta 1 development. Settings Manager->Printers does not open Running system-config-printer from terminal gives following error: jack@jack-sb13:~$ system-config-printer ** (system-config-printer.py:1603): WARNING **: Couldn't connect to accessibility bus: Failed to connect to socket /tmp/dbus-iWKUtlwWVF: Connection refused ERROR:root:Could not find any typelib for Notify Traceback (most recent call last): File "/usr/share/system-config-printer/system-config-printer.py", line 73, in import jobviewer File "/usr/share/system-config-printer/jobviewer.py", line 27, in from gi.repository import Notify ImportError: cannot import name Notify ProblemType: Bug DistroRelease: Ubuntu 13.10 Package: system-config-printer-gnome 1.4.2-0ubuntu1 ProcVersionSignature: Ubuntu 3.11.0-4.9-generic 3.11.0-rc7 Uname: Linux 3.11.0-4-generic i686 ApportVersion: 2.12.1-0ubuntu3 Architecture: i386 CupsErrorLog: CurrentDmesg: [4.338652] r8169 :04:00.0 eth0: link up [4.338660] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Date: Thu Sep 5 09:14:54 2013 InstallationDate: Installed on 2013-09-04 (1 days ago) InstallationMedia: Xubuntu 13.10 "Saucy Salamander" - Alpha i386 (20130902.1) Lpstat: device for DESKJET-940C: ipp://jack-xubuntu.local:631/printers/DESKJET-940C device for DESKJET-940C-Test: ipp://192.168.1.2:631/printers/DESKJET-940C-Test MachineType: Dell Inc. Inspiron 660s MarkForUpload: True PackageArchitecture: all Papersize: letter ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-4-generic root=UUID=36996f3e-a233-490c-a5c5-d066ac163c2f ro quiet splash SourcePackage: system-config-printer UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 11/22/2012 dmi.bios.vendor: Dell Inc. dmi.bios.version: A09 dmi.board.name: 0XFWHV dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 3 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvrA09:bd11/22/2012:svnDellInc.:pnInspiron660s:pvr:rvnDellInc.:rn0XFWHV:rvrA00:cvnDellInc.:ct3:cvr: dmi.product.name: Inspiron 660s dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/system-config-printer/+bug/1221219/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1211920] Re: Low audio output on Vostro 5460 (with Ubuntu pre-loaded)
you may need patch similar to
http://git.kernel.org/cgit/linux/kernel/git/tiwai/sound.git/commit/sound/pci/hda?id=ac612407932be18697b5ae9da0a80f138b8bea8e
static struct snd_pci_quirk alc269_fixup_tbl[] = {
SND_PCI_QUIRK_VENDOR(0x104d, "Sony VAIO", ALC269_FIXUP_SONY_VAIO),
SND_PCI_QUIRK(0x1028, 0x0470, "Dell M101z", ALC269_FIXUP_DELL_M101Z),
+ SND_PCI_QUIRK(0x1043, 0x1a13, "Dell Vostro 5460",
ALC269_FIXUP_ASUS_G73JW),
SND_PCI_QUIRK(0x17aa, 0x21b8, "Thinkpad Edge 14",
ALC269_FIXUP_LENOVO_EDGE14),
SND_PCI_QUIRK(0x1043, 0x1a13, "Asus G73Jw", ALC269_FIXUP_ASUS_G73JW),
{}
};
or you define a new fixup ALC290_FIXUP_DELL_VOSTRO_5460 instead of using
ALC269_FIXUP_ASUS_G73JW
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to alsa-driver in Ubuntu.
https://bugs.launchpad.net/bugs/1211920
Title:
Low audio output on Vostro 5460 (with Ubuntu pre-loaded)
Status in “alsa-driver” package in Ubuntu:
Incomplete
Bug description:
I have been using a Dell Vostro 5460 for a while. It came pre-loaded
with Ubuntu 12.04. Also, I could find some customizations in the same.
And there's an issue of low audio output that I am facing. I have been using
the 12.10 and 13.04 versions currently and the issue affects them too.
Also, reportedly Windows users are facing no such issues.
Some discussion regarding the same can be found at:
http://ubuntuforums.org/showthread.php?t=2152776
http://ubuntuforums.org/showthread.php?t=2159407
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1211920/+subscriptions
--
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1211920] Re: Low audio output on Vostro 5460 (with Ubuntu pre-loaded)
SND_PCI_QUIRK(0x1028, 0x05da, "Dell Vostro 5460", ALC269_FIXUP_ASUS_G73JW), -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to alsa-driver in Ubuntu. https://bugs.launchpad.net/bugs/1211920 Title: Low audio output on Vostro 5460 (with Ubuntu pre-loaded) Status in “alsa-driver” package in Ubuntu: Incomplete Bug description: I have been using a Dell Vostro 5460 for a while. It came pre-loaded with Ubuntu 12.04. Also, I could find some customizations in the same. And there's an issue of low audio output that I am facing. I have been using the 12.10 and 13.04 versions currently and the issue affects them too. Also, reportedly Windows users are facing no such issues. Some discussion regarding the same can be found at: http://ubuntuforums.org/showthread.php?t=2152776 http://ubuntuforums.org/showthread.php?t=2159407 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1211920/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1221318] StacktraceSource.txt
** Attachment added: "StacktraceSource.txt" https://bugs.launchpad.net/bugs/1221318/+attachment/3804232/+files/StacktraceSource.txt -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to pidgin in Ubuntu. https://bugs.launchpad.net/bugs/1221318 Title: pidgin crashed with SIGSEGV in g_idle_dispatch() Status in “pidgin” package in Ubuntu: New Bug description: I was trying to connect pidging to lync using the sipe plugin when it crashed.The windows closed and it indicate in the console : "core dumped". ProblemType: Crash DistroRelease: Ubuntu 13.10 Package: pidgin 1:2.10.7-0ubuntu4.1 ProcVersionSignature: Ubuntu 3.11.0-4.9-generic 3.11.0-rc7 Uname: Linux 3.11.0-4-generic i686 ApportVersion: 2.12.1-0ubuntu3 Architecture: i386 Date: Thu Sep 5 18:12:43 2013 Disassembly: => 0xb5dc7820: Cannot access memory at address 0xb5dc7820 ExecutablePath: /usr/bin/pidgin InstallationDate: Installed on 2013-08-05 (31 days ago) InstallationMedia: Lubuntu 13.10 "Saucy Salamander" - Alpha i386 (20130804) MarkForUpload: True ProcCmdline: pidgin SegvAnalysis: Segfault happened at: 0xb5dc7820:Cannot access memory at address 0xb5dc7820 PC (0xb5dc7820) not located in a known VMA region (needed executable region)! SegvReason: executing unknown VMA Signal: 11 SourcePackage: pidgin StacktraceTop: ?? () g_idle_dispatch (source=source@entry=0xb808afc8, callback=0xb5dc7820, user_data=0xb8013d78) at /build/buildd/glib2.0-2.37.6/./glib/gmain.c:5250 g_main_dispatch (context=0xb7904538, context@entry=0xb79c0ca0) at /build/buildd/glib2.0-2.37.6/./glib/gmain.c:3065 g_main_context_dispatch (context=context@entry=0xb7904538) at /build/buildd/glib2.0-2.37.6/./glib/gmain.c:3641 g_main_context_iterate (context=0xb7904538, block=block@entry=1, dispatch=dispatch@entry=1, self=) at /build/buildd/glib2.0-2.37.6/./glib/gmain.c:3712 Title: pidgin crashed with SIGSEGV in g_idle_dispatch() UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dialout dip lpadmin plugdev sambashare sudo uucp To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/pidgin/+bug/1221318/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1221318] ThreadStacktrace.txt
** Attachment added: "ThreadStacktrace.txt" https://bugs.launchpad.net/bugs/1221318/+attachment/3804233/+files/ThreadStacktrace.txt ** Attachment removed: "CoreDump.gz" https://bugs.launchpad.net/bugs/1221318/+attachment/3804211/+files/CoreDump.gz ** Changed in: pidgin (Ubuntu) Importance: Undecided => Medium ** Tags removed: need-i386-retrace -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to pidgin in Ubuntu. https://bugs.launchpad.net/bugs/1221318 Title: pidgin crashed with SIGSEGV in g_idle_dispatch() Status in “pidgin” package in Ubuntu: New Bug description: I was trying to connect pidging to lync using the sipe plugin when it crashed.The windows closed and it indicate in the console : "core dumped". ProblemType: Crash DistroRelease: Ubuntu 13.10 Package: pidgin 1:2.10.7-0ubuntu4.1 ProcVersionSignature: Ubuntu 3.11.0-4.9-generic 3.11.0-rc7 Uname: Linux 3.11.0-4-generic i686 ApportVersion: 2.12.1-0ubuntu3 Architecture: i386 Date: Thu Sep 5 18:12:43 2013 Disassembly: => 0xb5dc7820: Cannot access memory at address 0xb5dc7820 ExecutablePath: /usr/bin/pidgin InstallationDate: Installed on 2013-08-05 (31 days ago) InstallationMedia: Lubuntu 13.10 "Saucy Salamander" - Alpha i386 (20130804) MarkForUpload: True ProcCmdline: pidgin SegvAnalysis: Segfault happened at: 0xb5dc7820:Cannot access memory at address 0xb5dc7820 PC (0xb5dc7820) not located in a known VMA region (needed executable region)! SegvReason: executing unknown VMA Signal: 11 SourcePackage: pidgin StacktraceTop: ?? () g_idle_dispatch (source=source@entry=0xb808afc8, callback=0xb5dc7820, user_data=0xb8013d78) at /build/buildd/glib2.0-2.37.6/./glib/gmain.c:5250 g_main_dispatch (context=0xb7904538, context@entry=0xb79c0ca0) at /build/buildd/glib2.0-2.37.6/./glib/gmain.c:3065 g_main_context_dispatch (context=context@entry=0xb7904538) at /build/buildd/glib2.0-2.37.6/./glib/gmain.c:3641 g_main_context_iterate (context=0xb7904538, block=block@entry=1, dispatch=dispatch@entry=1, self=) at /build/buildd/glib2.0-2.37.6/./glib/gmain.c:3712 Title: pidgin crashed with SIGSEGV in g_idle_dispatch() UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dialout dip lpadmin plugdev sambashare sudo uucp To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/pidgin/+bug/1221318/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1221350] [NEW] Remaining issues for gnome-control-center 3.8 update
Public bug reported: Moved remaining issues from https://blueprints.launchpad.net/ubuntu/+spec/desktop-gnome-3-8 Perhaps these should be split into separate bugs: * Consider simplifying the Ubuntu logo patch so that we don't have to wait on Design every cycle and to simplify backporting. LP: #1181442 The Ubuntu logo patch needs to be redone since upstream is now using the new gtk3 resource file * symbol conflicts between gnome datetime panel and libtimezonemap (LP: #1187981) * modemmanager needs to be updated. LP: #1123302 * input-sources-text-entry.patch - The indicator-keyboard patchto the Region panel need to be ported to the new design. * There's support for packagekit to install new language packs but not to uninstall them (since apparently PackageKit can't handle this) * Do we really need sound_nua_panel.patch? These changes should be handled upstream... * Now named "Settings" Should we revert name to "System Settings" ? * 59_install_gcm_components_on_demand.patch: Would need to be rewritten if needed but only saves about 5MB * We should probably just hide the new Sharing panel in Unity for now. - The Sharing panel is useful although it was designed for a Red Hat style of handling services. With that model, services are not automatically run when installed, which allows those distros to include openssh-server by default. It's assumed that distros will install all the useful services by default. - By default Ubuntu will get Screen Sharing (basically replacing vino-preferences) and Bluetooth Sharing (for computers with bluetooth) - If someone adds PackageKit integration, perhaps Media Sharing (rygel) and Remote Login (openssh-server) could be enabled. - However, the code currently requires systemd for the ssh "Remote Login" panel. - Personal File Sharing is the frontend for gnome-user-share now but since it's just webdav sharing, this section is unusable in Ubuntu where gnome-user-share doesn't come with apache2. We could patch to hide this section. ** Affects: gnome-control-center (Ubuntu) Importance: Undecided Status: New ** Tags: upgrade-software-version -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gnome-control-center in Ubuntu. https://bugs.launchpad.net/bugs/1221350 Title: Remaining issues for gnome-control-center 3.8 update Status in “gnome-control-center” package in Ubuntu: New Bug description: Moved remaining issues from https://blueprints.launchpad.net/ubuntu/+spec/desktop-gnome-3-8 Perhaps these should be split into separate bugs: * Consider simplifying the Ubuntu logo patch so that we don't have to wait on Design every cycle and to simplify backporting. LP: #1181442 The Ubuntu logo patch needs to be redone since upstream is now using the new gtk3 resource file * symbol conflicts between gnome datetime panel and libtimezonemap (LP: #1187981) * modemmanager needs to be updated. LP: #1123302 * input-sources-text-entry.patch - The indicator-keyboard patchto the Region panel need to be ported to the new design. * There's support for packagekit to install new language packs but not to uninstall them (since apparently PackageKit can't handle this) * Do we really need sound_nua_panel.patch? These changes should be handled upstream... * Now named "Settings" Should we revert name to "System Settings" ? * 59_install_gcm_components_on_demand.patch: Would need to be rewritten if needed but only saves about 5MB * We should probably just hide the new Sharing panel in Unity for now. - The Sharing panel is useful although it was designed for a Red Hat style of handling services. With that model, services are not automatically run when installed, which allows those distros to include openssh-server by default. It's assumed that distros will install all the useful services by default. - By default Ubuntu will get Screen Sharing (basically replacing vino-preferences) and Bluetooth Sharing (for computers with bluetooth) - If someone adds PackageKit integration, perhaps Media Sharing (rygel) and Remote Login (openssh-server) could be enabled. - However, the code currently requires systemd for the ssh "Remote Login" panel. - Personal File Sharing is the frontend for gnome-user-share now but since it's just webdav sharing, this section is unusable in Ubuntu where gnome-user-share doesn't come with apache2. We could patch to hide this section. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-control-center/+bug/1221350/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1219486] Re: FFe: Update gnome-settings-daemon to 3.8.4
There aren't any known issues with the gnome-settings-daemon update. I just filed bug 1221350 with a rough list of what still needs to be done for gnome-control-center 3.8. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gnome-settings-daemon in Ubuntu. https://bugs.launchpad.net/bugs/1219486 Title: FFe: Update gnome-settings-daemon to 3.8.4 Status in “gnome-settings-daemon” package in Ubuntu: New Bug description: https://bazaar.launchpad.net/~gnome3-team/gnome-settings- daemon/ubuntu/view/head:/debian/changelog https://git.gnome.org/browse/gnome-settings- daemon/tree/NEWS?h=gnome-3-8 Call for testing: https://lists.ubuntu.com/archives/ubuntu- desktop/2013-August/004296.html The Ubuntu GNOME team has been testing gnome-settings-daemon 3.8 with packages available in the GNOME3 Staging PPA (for 13.04 users) since the Saucy cycle opened. We didn't get the upload in by Feature Freeze because we were waiting for indicator-keyboard to land in Saucy to make sure that this upload didn't cause any regressions with the input method support. There are no known remaining regressions with this upload. I can no longer reproduce bug 1201679 with this build. This update is also a prerequisite for updating gnome-disk-utility to 3.8 (bug 1092719). gnome-control-center also needs updating (for moved gsettings keys and similar) and gnome-shell needs a patch to be dropped. I am ready to upload all three of these packages now. ProblemType: Bug DistroRelease: Ubuntu 13.10 Package: gnome-settings-daemon 3.6.4-0ubuntu19 ProcVersionSignature: Ubuntu 3.11.0-4.9-generic 3.11.0-rc7 Uname: Linux 3.11.0-4-generic x86_64 ApportVersion: 2.12.1-0ubuntu3 Architecture: amd64 Date: Sun Sep 1 11:29:05 2013 MarkForUpload: True SourcePackage: gnome-settings-daemon UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-settings-daemon/+bug/1219486/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 370034]
Tomaž Vajngerl committed a patch related to this issue. It has been pushed to "master": http://cgit.freedesktop.org/libreoffice/core/commit/?id=8c8b165f54399aa5a4f1c26f29101d4482eb9339 fdo#38144 more stable ruler actions on tables The patch should be included in the daily builds available at http://dev-builds.libreoffice.org/daily/ in the next 24-48 hours. More information about daily builds can be found at: http://wiki.documentfoundation.org/Testing_Daily_Builds Affected users are encouraged to test the fix and report feedback. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to libreoffice in Ubuntu. https://bugs.launchpad.net/bugs/370034 Title: [Upstream] No horizontal ruler snapping in Writer Status in LibreOffice Productivity Suite: In Progress Status in The OpenOffice.org Suite: Unknown Status in “libreoffice” package in Ubuntu: Triaged Status in “openoffice.org” package in Ubuntu: Won't Fix Bug description: Binary package hint: openoffice.org 1) lsb_release -rd Description: Ubuntu 11.04 Release: 11.04 2) apt-cache policy libreoffice-writer libreoffice-writer: Installed: 1:3.3.2-1ubuntu5 Candidate: 1:3.3.2-1ubuntu5 Version table: *** 1:3.3.2-1ubuntu5 0 500 http://us.archive.ubuntu.com/ubuntu/ natty-updates/main i386 Packages 100 /var/lib/dpkg/status 1:3.3.2-1ubuntu4 0 500 http://us.archive.ubuntu.com/ubuntu/ natty/main i386 Packages 3) What is expected to happen is when one clicks the horizontal ruler in effort to set up consistent margins, tab stops, and paragraph indents, it snaps to the markers. 4) What happens instead is they have complete freedom of movement. WORKAROUND: Click Format -> Paragraph... -> Indent & Spacing tab and choose desired indents. WORKAROUND: Use AbiWord. apt-cache policy abiword abiword: Installed: 2.8.6-0.3build1 Candidate: 2.8.6-0.3build1 Version table: *** 2.8.6-0.3build1 0 500 http://us.archive.ubuntu.com/ubuntu/ natty/universe i386 Packages 100 /var/lib/dpkg/status ProblemType: Bug Architecture: i386 DistroRelease: LinuxMint 6 Package: openoffice.org-core 1:3.0.1-7ubuntu1~intrepid1 ProcEnviron: PATH=/usr/lib/openoffice/program:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games LANG=en_US.UTF-8 SHELL=/bin/bash SourcePackage: openoffice.org Uname: Linux 2.6.27-7-generic i686 UnreportableReason: This is not a genuine LinuxMint package To manage notifications about this bug go to: https://bugs.launchpad.net/df-libreoffice/+bug/370034/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
