Re: [development-axapta] Security Key
Hi, There is a security profiler tool which can be used to check the access. You need to get that from Microsoft support. Hemant From: shamika shamik...@yahoo.com To: development-axapta@yahoogroups.com Sent: Thu, March 11, 2010 2:29:07 PM Subject: [development-axapta] Security Key Hello, I wanted to check security key access of logged-in user. Lets say, userId is dev11. Then I want to check whether dev11 has full access for security key, say VendKey (which is maintained in some table as a parameter). Does anybody have an idea about how to do the same? Please let me know. Thanks in advance, Sam [Non-text portions of this message have been removed]
Re: [development-axapta] How do I raise the indent from production department to inventory department
Hi, Following options can be implemented 1. Production order can be split and spread over 3 months or Create on production order but start only partial quantity needed for that month 2. Generate a pick list. Material can be allocated and then issued. Pick list is the only way to communicate to Materials department [Indent]. 3. In case of extra material is needed you can still create the picklist jounral and print out that and issue to the Materials Dept. Hemant K - Original Message From: ranganath_mbs [EMAIL PROTECTED] To: development-axapta@yahoogroups.com Sent: Tuesday, January 15, 2008 11:24:30 PM Subject: [development-axapta] How do I raise the indent from production department to inventory department Hi all Can any one give me brief on how to raise indent the scenario is say( I want to produce 1 tone of finished product in 3 months for this I need raw material for this raw material I need to raise the indent to inventory so that inventory people can allocate the raw material for this indent ) Thanks for any help. Looking for last minute shopping deals? Find them fast with Yahoo! Search. http://tools.search.yahoo.com/newsearch/category.php?category=shopping [Non-text portions of this message have been removed]
Re: [development-axapta] I am having problem in operations (Production - planning)
Hi, Next operartion field in the routing defines which operation steps are one after the other or parallel, also make sure the parameter is set to allow route network. Hemant K. - Original Message From: ranganath_mbs [EMAIL PROTECTED] To: development-axapta@yahoogroups.com Sent: Saturday, March 31, 2007 7:15:58 AM Subject: [development-axapta] I am having problem in operations (Production - planning) Hi all This is Ranganath I am working in ax-4 and 3 but I am having problem in operations where as in SAP or Navision I do have parallel operations but I am not able to identify in ax-4 or 3 versions can any one help in this case Thanks in advance Regards ranganath It's here! Your new message! Get new email alerts with the free Yahoo! Toolbar. http://tools.search.yahoo.com/toolbar/features/mail/ [Non-text portions of this message have been removed]
Re: [development-axapta] ledger settlement
Hi, Try CustTrans or VendTrans Hemant Alejandro Ibarra [EMAIL PROTECTED] wrote: Hi Agus, I had check my LedgerTransSettlement but is empty, do you know how this table is filled Agus Riyadi [EMAIL PROTECTED] escribió: Hi Alex, There is relation of LedgerTrans to LedgerTransSettlement, Then LedgerTrans has relation to customer or vendor invoice journal. I think you can create query based on these relations. Agus On 3/23/06, axapta_soporte [EMAIL PROTECTED] wrote: Hi everybody! Is there a way to know, which ledger settlement corresponds to a specific transaction of the VendTrans table or the Custable table? Alex Yahoo! Groups Links [Non-text portions of this message have been removed] SPONSORED LINKS Computer part Programming languages Microsoft axapta Support exchange - YAHOO! GROUPS LINKS Visit your group development-axapta on the web. To unsubscribe from this group, send an email to: [EMAIL PROTECTED] Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. - - Do You Yahoo!? La mejor conexión a Internet y 2GB extra a tu correo por $100 al mes. http://net.yahoo.com.mx [Non-text portions of this message have been removed] - YAHOO! GROUPS LINKS Visit your group development-axapta on the web. To unsubscribe from this group, send an email to: [EMAIL PROTECTED] Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. - - Yahoo! Messenger with Voice. PC-to-Phone calls for ridiculously low rates. [Non-text portions of this message have been removed] YAHOO! GROUPS LINKS Visit your group "development-axapta" on the web. To unsubscribe from this group, send an email to:[EMAIL PROTECTED] Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
Re: [development-axapta] Problem in Virtual Company
Hi, FIrst thing you never add a table to a virtual Table collection which has records. If you have to have that table first export the table, then go through the process of adding table collection, then imprt the exported table back. When you add the records to any table shared in Virtual Collection the dataareaid is replaced by the Compnay ID of virtual company. The records are now belonging to the companies listed under the Virtual Company. TIPS 1) Implementation of Virtual Company has to be planned ahead and it is not recommended to do any time in between. Then you have to do the task as mentioned above. 2) Transaction tables should never be shared. 3) If you shared a master table remember that all the ancillary tables (groups) should be same in all the companies listed under the Virtual Company. Hemant axpdev [EMAIL PROTECTED] wrote: Hi, I created a New Virtual Company Account say VC1 and added table collection which containes only LedgerTable. I included 2 Company account DAT and DMO both has records in Ledger table. When I open the Chart of Accounts No records has been listed. can any body explain me how to setup virtual Company. Thanks in Advance. SPONSORED LINKS Computer part Programming languages Microsoft axapta Support exchange - YAHOO! GROUPS LINKS Visit your group development-axapta on the web. To unsubscribe from this group, send an email to: [EMAIL PROTECTED] Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. - - Yahoo! Messenger with Voice. Make PC-to-Phone Calls to the US (and 30+ countries) for 2¢/min or less. [Non-text portions of this message have been removed] SPONSORED LINKS Computer part Programming languages Microsoft axapta Support exchange YAHOO! GROUPS LINKS Visit your group "development-axapta" on the web. To unsubscribe from this group, send an email to:[EMAIL PROTECTED] Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
Re: [development-axapta] Re: Intercompany Accounting - PLEASE HELP
Hi, In ICO, One company can link with other company only once. Because the accounts specified work as inter company payables receivables, and you need only one ICO payables and one ICO receivables for any ICO type dealings (Buy / Sell ). I haven't seen any Customer requesting multiple accounts the way you had expressed. Hemant d_rede [EMAIL PROTECTED] wrote: Hi Hemant It seems that in Axapta you can only create one Intercompany Account per other company. General Ledger - Setup - Posting - Intercompany Accounting Meaning that from CompanyA I can only create one intercompany account for CompanyB and CompanyC and so on. But not 2 intercompany accounts for CompanyB? The Error: Cannot create a record in Intercompany Accounting (LedgerInterCompany). Company Accounts: **The company Account**. The record allready exists. Can you please advice?? Thanks in advance. --- In development-axapta@yahoogroups.com, Hemant Kumthekar [EMAIL PROTECTED] wrote: Daniel, The email is too cryptic , can you please rephrase your question. Hemant Daniel J. Redelinghuys [EMAIL PROTECTED] wrote: PLEASE HELP Before I break Axapta - for the Intercompany Accounting, I can only create one entry per company... Example in CompA for *CompB* and CompC. But not possible in CompA for * CompB(1)*, *CompB(2)* and CompC. Can anyone please tell my why this is the case, and why I should not attempt to change this logic in Axpta. Did anyone experience this problem before, what are the possible/ potential pitfalls??? -- Regards ** Niel ** --- D.J. Redelinghuys Give a man a computer program and you give him a headache, but teach him to program computers and you give him the power to create headaches for others for the rest of his life... R. B. Forest Public WebSite: http://gundwale.tripod.com/ [Non-text portions of this message have been removed] SPONSORED LINKS Computer part Programming languages Microsoft axapta Support exchange - YAHOO! GROUPS LINKS Visit your group development-axapta on the web. To unsubscribe from this group, send an email to: [EMAIL PROTECTED] Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. - - Yahoo! Autos. Looking for a sweet ride? Get pricing, reviews, more on new and used cars. [Non-text portions of this message have been removed] SPONSORED LINKS Computer part Programming languages Microsoft axapta Support exchange - YAHOO! GROUPS LINKS Visit your group development-axapta on the web. To unsubscribe from this group, send an email to: [EMAIL PROTECTED] Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. - __ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com [Non-text portions of this message have been removed] SPONSORED LINKS Computer part Programming languages Microsoft axapta Support exchange YAHOO! GROUPS LINKS Visit your group "development-axapta" on the web. To unsubscribe from this group, send an email to:[EMAIL PROTECTED] Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
Re: [development-axapta] Intercompany Accounting - PLEASE HELP
Daniel, The email is too cryptic , can you please rephrase your question. Hemant Daniel J. Redelinghuys [EMAIL PROTECTED] wrote: PLEASE HELP Before I break Axapta - for the Intercompany Accounting, I can only create one entry per company... Example in CompA for *CompB* and CompC. But not possible in CompA for * CompB(1)*, *CompB(2)* and CompC. Can anyone please tell my why this is the case, and why I should not attempt to change this logic in Axpta. Did anyone experience this problem before, what are the possible/ potential pitfalls??? -- Regards ** Niel ** --- D.J. Redelinghuys Give a man a computer program and you give him a headache, but teach him to program computers and you give him the power to create headaches for others for the rest of his life... R. B. Forest Public WebSite: http://gundwale.tripod.com/ [Non-text portions of this message have been removed] SPONSORED LINKS Computer part Programming languages Microsoft axapta Support exchange - YAHOO! GROUPS LINKS Visit your group development-axapta on the web. To unsubscribe from this group, send an email to: [EMAIL PROTECTED] Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. - - Yahoo! Autos. Looking for a sweet ride? Get pricing, reviews, more on new and used cars. [Non-text portions of this message have been removed] SPONSORED LINKS Computer part Programming languages Microsoft axapta Support exchange YAHOO! GROUPS LINKS Visit your group "development-axapta" on the web. To unsubscribe from this group, send an email to:[EMAIL PROTECTED] Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
Re: [development-axapta] Vendor addresses
Joel, I think the Consultant is right. Basically that is the Invoice Account or the Remit To type of vendor. If you have a Vendor who has 4 different Retail offices you purchase items from , but you send Remittance to only the Head Office, then create 5 Vendor accounts and in 4 vendor accounts use the Invoice Account of teh Head Office. Other option you have is to Modify the Check printing program (which I wouldn't recommend anytime) Hemant Joel [EMAIL PROTECTED] wrote: Some of our vendors have an address to where we send purchase ordes and a different address to where we send payments. A consultant told me that the only way that we can have two different addresses is to create two different vendors, one will be used for P.O. and the other to send payments, both vendors are tied together. To me this doesn't make much sense. There is a field where you can specify alternate addresses but they are for invoices and returned items, there is no choice for an alternate address that would print on a check. Apparantely the main address always prints on the check. Is there another good way of doing it? Thank you. SPONSORED LINKS Computer part Programming languages Microsoft axapta Support exchange - YAHOO! GROUPS LINKS Visit your group development-axapta on the web. To unsubscribe from this group, send an email to: [EMAIL PROTECTED] Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. - - Yahoo! Photos Ring in the New Year with Photo Calendars. Add photos, events, holidays, whatever. [Non-text portions of this message have been removed] SPONSORED LINKS Computer part Programming languages Microsoft axapta Support exchange YAHOO! GROUPS LINKS Visit your group "development-axapta" on the web. To unsubscribe from this group, send an email to:[EMAIL PROTECTED] Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
Re: [development-axapta] Number Sequence---blocked
Hi, Have you checked the Number Sequence, and can you let us know in which module/menu option and which number sequence like Voucher Number sequence already used .. Voucher number is most of the time a number sequence which implementers don't take care about and get problems in Live Implementation sites. My suggestion will be to check which Number Sequence is a problem , which you can find out from the Infolog, and have a look at the Sequence and may be your option will be to put a prefix to it. Hemant hilda cabrejos [EMAIL PROTECTED] wrote: Hello everybody When posting any journal AXAPTA is giving my users an error that the number sequence has already been used this happens when they try to register the journal, they have to do the work all over again and the wasted time is enormous. Has anyone experienced this problem and / or any suggestions on how to solve it? Thanks in advance Hilda - Yahoo! Music Unlimited - Access over 1 million songs. Try it free. [Non-text portions of this message have been removed] - YAHOO! GROUPS LINKS Visit your group development-axapta on the web. To unsubscribe from this group, send an email to: [EMAIL PROTECTED] Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. - - Yahoo! Music Unlimited - Access over 1 million songs. Try it free. [Non-text portions of this message have been removed] YAHOO! GROUPS LINKS Visit your group "development-axapta" on the web. To unsubscribe from this group, send an email to:[EMAIL PROTECTED] Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
Re: [development-axapta] item master
Hi Joel, The purchase order prints both internal and vendor Item number one below the other. But I don't see a line number field in the output format until and unless you have a option pack (Country specific layer), or modification. Normally we modify the Purchase order Report to suit certain requirements like this. We print a text description Vendor Part - and then the part number of the vendor in bold so that it is distinctly visible. Hemant Joel Gonzalez [EMAIL PROTECTED] wrote: I did what you told me. I printed some practice Purchase Orders in a test environment. It's working the way I want it to work. The only thing is that in the purchase order, the vendors part number appears under the 'line number' field and our company's internal part number appears under the 'item number' field. This would be very confusing to our vendor. Is this a format problem, or is that the way it works by default? Hemant Kumthekar [EMAIL PROTECTED] wrote:Hi, You can setup Trade agreements for all your vendors for the item, also this will ensure that if you are running Master Planning, then suggest a vendor depending upon Lead Times or Lowest Price. One more thing you can keep a list of approved vendors and their item descriptions by setting up Vendor Items from Item Master Setup Vendor Item Description. Hemant Joel [EMAIL PROTECTED] wrote: How can I enter multiple vendors for one item. We purchase the same item from more than one vendor, depending on the price we decide which vendor to give the order to. What I need to do is to enter that item once in the item master but be able to enter all the vendors that supply us with that item. Thanks SPONSORED LINKS Computer part Programming languages Microsoft axapta Support exchange - YAHOO! GROUPS LINKS Visit your group development-axapta on the web. To unsubscribe from this group, send an email to: [EMAIL PROTECTED] Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. - - Yahoo! FareChase - Search multiple travel sites in one click. [Non-text portions of this message have been removed] - YAHOO! GROUPS LINKS Visit your group development-axapta on the web. To unsubscribe from this group, send an email to: [EMAIL PROTECTED] Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. - [Non-text portions of this message have been removed] SPONSORED LINKS Computer part Programming languages Microsoft axapta Support exchange - YAHOO! GROUPS LINKS Visit your group development-axapta on the web. To unsubscribe from this group, send an email to: [EMAIL PROTECTED] Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. - - Yahoo! FareChase - Search multiple travel sites in one click. [Non-text portions of this message have been removed] SPONSORED LINKS Computer part Programming languages Microsoft axapta Support exchange YAHOO! GROUPS LINKS Visit your group "development-axapta" on the web. To unsubscribe from this group, send an email to:[EMAIL PROTECTED] Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
Re: [development-axapta] item master
Hi, You can setup Trade agreements for all your vendors for the item, also this will ensure that if you are running Master Planning, then suggest a vendor depending upon Lead Times or Lowest Price. One more thing you can keep a list of approved vendors and their item descriptions by setting up Vendor Items from Item Master Setup Vendor Item Description. Hemant Joel [EMAIL PROTECTED] wrote: How can I enter multiple vendors for one item. We purchase the same item from more than one vendor, depending on the price we decide which vendor to give the order to. What I need to do is to enter that item once in the item master but be able to enter all the vendors that supply us with that item. Thanks SPONSORED LINKS Computer part Programming languages Microsoft axapta Support exchange - YAHOO! GROUPS LINKS Visit your group development-axapta on the web. To unsubscribe from this group, send an email to: [EMAIL PROTECTED] Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. - - Yahoo! FareChase - Search multiple travel sites in one click. [Non-text portions of this message have been removed] YAHOO! GROUPS LINKS Visit your group "development-axapta" on the web. To unsubscribe from this group, send an email to:[EMAIL PROTECTED] Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
Re: [development-axapta] Changes between development and test environments
Hi Andew, Can you please expalin what folders are copied and renamed? If you loook at the installation directory , you have a structure something like this Navision Axapta Application Appl and under Appl you can have sub folders which can AXTEST , AXDEV , Standard. So if your developers do development in AXDEV program directory , you can just copy the AXDEV and restore it over AXTEST, also you would like to take a SQL backup of database connected to DEV environment and then restore that SQL backup on TEST Db using SQL Manager. Be careful when you are doing these tasks, in this case you are replicating whatever is in DEV environment on to TEST environment. In case you are trying to just copy certain changes , then you may be better off by exporting with Lables (normally you should have created a Label file) and then import the project in TEST. Take care about the label file in TEST environment. Hemant Andrew Staples [EMAIL PROTECTED] wrote: Sorry for the newb questions, we are migrating from an old RPG-based system to Axapta, so some of my questions probably sound pretty dumb. Our Axapta programmers code in a development environment using fat 3-tier clients. We then copy the folder, rename the folder with the name of the test environment, delete the aoi file, turn back on the aos servers which rebuilds the aoi file; we then recompile and resync. However, we still get forms that in the development environment are different from in the test environment (lable names, or field that don't calculate, for example). In the test environment we use thin 3-tier clients. We've found out that hotfixes just mess everything up, which is why we copy the entire environment. Is there something wrong with this approach that would cause us to have these anomolies? Is there a best-practice method of moving code from development to test environments. Thanks, Andrew SPONSORED LINKS Computer part Programming languages Microsoft axapta Support exchange - YAHOO! GROUPS LINKS Visit your group development-axapta on the web. To unsubscribe from this group, send an email to: [EMAIL PROTECTED] Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. - - Yahoo! FareChase - Search multiple travel sites in one click. [Non-text portions of this message have been removed] SPONSORED LINKS Computer part Programming languages Microsoft axapta Support exchange YAHOO! GROUPS LINKS Visit your group "development-axapta" on the web. To unsubscribe from this group, send an email to:[EMAIL PROTECTED] Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
Re: [development-axapta] Lost BOMS and Routes when re-importing items
Hi, I think if you look at the InventTable from AOT Delete Actions the BomVersion , RouteVersion tables are linked so may be when you were prompted to delete the Tables while re-importing they got deleted. Can you check if you have records in BOMVersion and RouteVersion tables ? If you are trying to import these tables in TEST Database, I will suggest that you use SQL statement to clear the tables rather than going through Axapta. Hemant Andrew Staples [EMAIL PROTECTED] wrote: Hello, I exported all my items (inventtable, inventitemlocation, inventtablemodule), imported from a different file during which I deleted the original tables when prompted, and then reimported my original export. Now, my boms and routes are no longer linked to items. Also, the routes no longer are linked with workcenters. (The boms exist in bom and bomtable). Any ideas on what went wrong? Any help on how to sync everything back up (already tried syncronize)? Thanks, Andrew - YAHOO! GROUPS LINKS Visit your group development-axapta on the web. To unsubscribe from this group, send an email to: [EMAIL PROTECTED] Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. - - Yahoo! FareChase - Search multiple travel sites in one click. [Non-text portions of this message have been removed] SPONSORED LINKS Computer part Programming languages Microsoft axapta Support exchange YAHOO! GROUPS LINKS Visit your group "development-axapta" on the web. To unsubscribe from this group, send an email to:[EMAIL PROTECTED] Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
RE: [development-axapta] Form Query
Thank You guys, I will try both the suggestions. Hemant axapta developer [EMAIL PROTECTED] wrote: use: .value(SysQuery::valueNotEmptyString()) ANIL OZAY [EMAIL PROTECTED] wrote: Hi Hemant, You can give SQL criteria for range, but it must be in paranthesis. addRange( '(MyTable.MyField==A) || (MyTable.MyField==)') You must use double quote for range values. This is the solution ;) Regards, Anil -Original Message- From: development-axapta@yahoogroups.com [mailto:[EMAIL PROTECTED] On Behalf Of Askeryd Thomas Sent: Thursday, October 06, 2005 2:40 PM To: development-axapta@yahoogroups.com Subject: SV: [development-axapta] Form Query I'm pretty new to this but it should be possible to set the range value to !(not) or 0 to get it the way you want. Maybe checking out the dev. guide might help you. Thomas. Fr宺 development-axapta@yahoogroups.com [mailto:[EMAIL PROTECTED] F?emant Kumthekar Skickat: den 6 oktober 2005 05:00 Till: Axapta Äshy;ne: [development-axapta] Form Query Hi Guys, I wanted your help on the following problem. I have a customized table, where in there are some records I wanted to filter when I want to display on a form (grid). The main field is having Blanks or Nulls, Need help on this. I had seen some examples using ExecuteQuery in Datasource on Forms but they all seem to have some specific value to be used as filter. In my case I want to eliminate the records where the field has blanks / null. Thanks in advance. - Yahoo! for Good Click here to donate to the Hurricane Katrina relief effort. [Non-text portions of this message have been removed] SPONSORED LINKS Computer part gramming+languagesw3=Microsoft+axaptaw4=Support+exchangec=4s=90.sig=y LpvcLTIDJ5FTkRJGsO11w Programming languages tw2=Programming+languagesw3=Microsoft+axaptaw4=Support+exchangec=4s=9 0.sig=cuhEClK4dU4wapXFmKisbQ Microsoft axapta Programming+languagesw3=Microsoft+axaptaw4=Support+exchangec=4s=90.si g=yfeG_U6QaLfPOZZIud02Fg Support exchange Programming+languagesw3=Microsoft+axaptaw4=Support+exchangec=4s=90.si g=hy8yRGMzrmxdphyITTUeqA YAHOO! GROUPS LINKS * Visit your group development-axapta on the web. * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service . [Non-text portions of this message have been removed] Yahoo! Groups Links Bu e-posta ve muhtemel eklerinde verilen bilgiler kisiye ozel ve gizlidir. Anadolu Bilisim Hizmetleri A.S. bu mesajin icerigi ve ekleri ile ilgili hicbir hukuki sorumluluk kabul etmez. Yetkili alicilardan degilseniz, bu mesajin herhangi bir sekilde ifsa edilmesi, kullanilmasi, kopyalanmasi, yayilmasi veya mesajda yer alan hususlarla ilgili olarak herhangi bir islem yapilmasi kesinlikle yasaktir. Bu durumda hemen mesajin gondericisini bilgilendiriniz ve mesaji sisteminizden siliniz. Elektronik mesajlar uzerinde yapilmis herhangi bir degisiklik veya sonuclari uzerinde Anadolu Bilisim Hizmetleri A.S.'nin sorumlulugu yoktur. Ayrica, e-posta mesajlarindaki hata ve/veya eksiklikten, virus icermesinden ve bilgisayar sisteminize verebilecegi herhangi bir zarardan Sirket olarak sorumluluk kabul etmeyecegimizi de bildiririz. This e-mail and any information included within any attached document are private and confidential and intended solely for the addressee. Anadolu Bilisim Hizmetleri A.S. does not accept any legal responsibility for the contents of this message and any attached documents. If you are not the intended addressee, it is forbidden to disclose, use, copy, or forward any information within the message or engage in any activity regarding the contents of this message. In such case please notify the sender and delete the message from your system immediately. Anadolu Bilisim Hizmetleri A.S. also denounces any legal responsibility for any amendments made on the electronic message and the outcome of these amendments, as well as any error and/or defect, virus content and any damage that may be given to your system. [Non-text portions of this message have been removed] Yahoo! Groups Links - Yahoo! for Good Click here to donate to the Hurricane Katrina relief effort. [Non-text portions of this message have been removed] SPONSORED LINKS Computer part Programming languages Microsoft axapta Support exchange - YAHOO! GROUPS LINKS Visit your group development-axapta on the web. To unsubscribe from this group, send an email to: [EMAIL PROTECTED] Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. - - Yahoo! for Good Click here to donate to the Hurricane Katrina relief effort. [Non-text portions of this
[development-axapta] Form Query
Hi Guys, I wanted your help on the following problem. I have a customized table, where in there are some records I wanted to filter when I want to display on a form (grid). The main field is having Blanks or Nulls, Need help on this. I had seen some examples using ExecuteQuery in Datasource on Forms but they all seem to have some specific value to be used as filter. In my case I want to eliminate the records where the field has blanks / null. Thanks in advance. - Yahoo! for Good Click here to donate to the Hurricane Katrina relief effort. [Non-text portions of this message have been removed] SPONSORED LINKS Computer part Programming languages Microsoft axapta Support exchange YAHOO! GROUPS LINKS Visit your group "development-axapta" on the web. To unsubscribe from this group, send an email to:[EMAIL PROTECTED] Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
[development-axapta] Auto field Advance in Grid
Hi, I wanted to know whether there is any properties on the Grid field we can use to make Axapta jump to next field automatically once the field is filled. I have a Grid with one column, where I have to capture information for an item. The field is in Grid because the number of enteries is based upon the quantity of the Item shipped. So if the Item Quantity to be shipped is 8 , I want the user to scan 8 serial numbers , but after every serial number scanned by the user the cursor should jump to next line in the grid. One way to program the scanner by adding new Line feed in the scanner device after it has scanned the bar code, but I wanted to know if it is possible to do it with in Axapta. - Sell on Yahoo! Auctions - No fees. Bid on great items. [Non-text portions of this message have been removed] YAHOO! GROUPS LINKS Visit your group "development-axapta" on the web. To unsubscribe from this group, send an email to:[EMAIL PROTECTED] Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
[development-axapta] Invoice Consolidation
Hi , We have a requirement may be a special and peculiar too. We would like to consolidate all the Open Invoices for a customer and create one Invoice with total amount equal to the sum of the invoices selected for consolidation. I am trying to look into the possibilities by writting a code to do this automatically. I had identified that there are tables like CustOpenTrans which can be used to display the Invoices on a form , then use the filter selection for customer code , Invoice date range , Payterm code to filter the invoices. The form will allow to mark the invoices to be consolidated and then have a menu button which will execute the consolidation routine. I don't know how should I go ahead with reversing the existing Invoices and creating a consolidated invoice. The thing to remember here is that we are not posting a Cash Payment against the invoices which are to be consolidated and this is to be done using X++ code. I highly appreciate responses and ideas from the forum/group. This is a typical requirement for a customer who deals in Finance and Leasing types aprat from a Sales and Distribution. Regards, HK - Discover Yahoo! Have fun online with music videos, cool games, IM more. Check it out! [Non-text portions of this message have been removed] Yahoo! Groups Links To visit your group on the web, go to:http://groups.yahoo.com/group/development-axapta/ To unsubscribe from this group, send an email to:[EMAIL PROTECTED] Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
[development-axapta] Axapta Invoice copies
Hi Guys, I wanted to print Invoice copies and each copy should be marked as Dealer Copy, File Copy please advise if anybody has done that. Thanks in Advance. HK __ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com [Non-text portions of this message have been removed] Yahoo! Groups Links To visit your group on the web, go to:http://groups.yahoo.com/group/development-axapta/ To unsubscribe from this group, send an email to:[EMAIL PROTECTED] Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
[development-axapta] Failed to Create or Open Session Control File (axdat.UDB)
Hi Guys, We have a 2-tier and 3-tier setup. 3 tier connections work fine. 2-tier works fine on the server. We have Application server which also serves as our AOS. But when we try to login from a client which is configure as 2-tier I'm getting the error about AXDAT.UDB. The application is not opened in exclusive mode , I have checked the ACUs. I tried the possible solution like 1. Log off all Users. 2. Shut down AOS Instance and Server 3. Deleted AXDAT.UDB 4. Logged in from 2-tier on a Client logged off 5. Strated AOS 6. Logged on from another Client 3-tier mode 7. Tried login from the same 2-tier client (step 4) I am still getting the error Failed to Create or Open Session Control File (axdat.UDB) in Shared write mode , insufficient access rights or another application has Locaked the file in exclusive write mode. Thanks in Advance. __ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com [Non-text portions of this message have been removed] Yahoo! Groups Links To visit your group on the web, go to:http://groups.yahoo.com/group/development-axapta/ To unsubscribe from this group, send an email to:[EMAIL PROTECTED] Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
RE: [development-axapta] Product builder, how to execute user entered X++
Hi,
I think you need to look for tables which store the information like for instance PBARule, PBARuleAction etc, and PBA classes. I haven't gone that deep to see what is the sequence of execution of code once you trigger the PB. But I think somebody should have figured out, and it will be interesting to hear from them.
HK
James Flavell [EMAIL PROTECTED] wrote:
Thanks
You say everything gets embedded in the model when you compile, this is the
part I am most interested in looking at. Basically I want to see how/where
the code to turn the user entered X++ (just a memo field at this point from
what I can see in the Product Builder) into actual AOT X++ (actual compiled
code), do you have any idea where I can see this happening?
Thanks again
James
-Original Message-
From: Hemant Kumthekar [mailto:[EMAIL PROTECTED]
Sent: 28 February 2005 03:23
To: development-axapta@yahoogroups.com
Subject: Re: [development-axapta] Product builder, how to execute user
entered X++
Hi James,
There are lot of things you can do in the Product Builder X++ code , like
you can check for the responses entered by user and calculate / manipulate
data based on the input, if you see the nodes you can attache the If / else,
Loop (for While) or X++ code. You can have array elements too. Have a look
at the sample Advance Lamp Model in Demo Data, I hope you find your answers
there.
Everything thing gets embedded in the Model when you compile, and the forms
are loaded, you can control the display of elements on the form by Visible /
invisible properties, the model once compiled runs very well in Rich/ thin
client as well as Web.
But check on one thing that the sales ordered configured on the web using
Product builder doesn't get recorded as what was configured, so when you go
back to the rich client and open up the Sales order and check it you will
not find the configuration. I think this is a known bug not yet addressed.
Regards,
HK
James Flavell [EMAIL PROTECTED] wrote:
Hi I am not a true X++ programmer and need some guideance to see how user
entered X++ logic can be executed (like what can be done in the product
builder).
Is it need into some kind of AOT object or compiled and run on the fly? Is
there performance issue to worry abut?
Thanks
James
-Original Message-
From: Bayliss, Barry [mailto:[EMAIL PROTECTED]
Sent: 25 February 2005 17:00
To: development-axapta@yahoogroups.com
Subject: RE: [development-axapta] Dynamic form changes possible?
Hello James,
>From your original description of what you are trying to do, the
sysSetupFormRun class is unable to do what you want.
As you want the effect to be record based, you need to use the active()
method on the datasource. Alternatively, you can use a lower level
call.
By modifying Docu\reSearch, you can partially achieve what you are
trying to do. I have attached a word document given screen shots
showing the effect in action (using the below code modification to the
Docu class).
This is just a starting point for you. Let me know if you get stuck.
Barry.
void reSearch(FormRun formRun)
{
Common common;
FormDataSource formDataSource;
boolean notePressed;
FormDesign formDesign;
int t;
void disableNoteButton()
{
infolog.formNoteButton(false, false);
}
;
Standard code deleted
// If datasource has no name = not valid
formDataSource = common.dataSource();
if (common.RecId == 12358860) {
if (FormRun.design().controlName(btHide)) {
FormRun.design().controlName(btHide).visible(false);
}
} else {
if (FormRun.design().controlName(btHide)) {
FormRun.design().controlName(btHide).visible(True);
}
}
standard code deleted
}
-Original Message-
From: James Flavell [mailto:[EMAIL PROTECTED]
Sent: Saturday, 19 February 2005 12:51 PM
To: development-axapta@yahoogroups.com
Subject: RE: [development-axapta] Dynamic form changes possible?
Thanks Carsten,
I have been debuggin alot in all these classes but I meant I could not
find
the line(s) of code that change the form layout (like what I managed to
find
for the security) even in the SysSaveSetup class.
I will go back and look some more.
Thanks for the job example I think that will make debugging a little
easier
Thanks a lot
James
-Original Message-
From: Carsten F. Frandsen [mailto:[EMAIL PROTECTED]
Sent: 16 February 2005 18:45
To: development-axapta@yahoogroups.com
Subject: SV: [development-axapta] Dynamic form changes possible?
There is another class SysSaveSetup which are used by the
SysSetupFormRun
class - SysSaveSetup class are used for saving and retrieving a user
defined
design...
Also SysSetupFormRun class are used by any form in Axapta - AFAIR it is
the
SysSetupFormRun class which actually executes the form !
Try entering the follwing job with a break-point - the use the debugger
to
investigate how the form is activated.
static void job1(Args _args)
{
Args args = new Args(formStr(InventItemGroup));
FormRun formRun;
;
form
Re: [development-axapta] Product builder, how to execute user entered X++
Hi James,
There are lot of things you can do in the Product Builder X++ code , like you can check for the responses entered by user and calculate / manipulate data based on the input, if you see the nodes you can attache the If / else, Loop (for While) or X++ code. You can have array elements too. Have a look at the sample Advance Lamp Model in Demo Data, I hope you find your answers there.
Everything thing gets embedded in the Model when you compile, and the forms are loaded, you can control the display of elements on the form by Visible / invisible properties, the model once compiled runs very well in Rich/ thin client as well as Web.
But check on one thing that the sales ordered configured on the web using Product builder doesn't get recorded as what was configured, so when you go back to the rich client and open up the Sales order and check it you will not find the configuration. I think this is a known bug not yet addressed.
Regards,
HK
James Flavell [EMAIL PROTECTED] wrote:
Hi I am not a true X++ programmer and need some guideance to see how user
entered X++ logic can be executed (like what can be done in the product
builder).
Is it need into some kind of AOT object or compiled and run on the fly? Is
there performance issue to worry abut?
Thanks
James
-Original Message-
From: Bayliss, Barry [mailto:[EMAIL PROTECTED]
Sent: 25 February 2005 17:00
To: development-axapta@yahoogroups.com
Subject: RE: [development-axapta] Dynamic form changes possible?
Hello James,
>From your original description of what you are trying to do, the
sysSetupFormRun class is unable to do what you want.
As you want the effect to be record based, you need to use the active()
method on the datasource. Alternatively, you can use a lower level
call.
By modifying Docu\reSearch, you can partially achieve what you are
trying to do. I have attached a word document given screen shots
showing the effect in action (using the below code modification to the
Docu class).
This is just a starting point for you. Let me know if you get stuck.
Barry.
void reSearch(FormRun formRun)
{
Common common;
FormDataSource formDataSource;
boolean notePressed;
FormDesign formDesign;
int t;
void disableNoteButton()
{
infolog.formNoteButton(false, false);
}
;
Standard code deleted
// If datasource has no name = not valid
formDataSource = common.dataSource();
if (common.RecId == 12358860) {
if (FormRun.design().controlName(btHide)) {
FormRun.design().controlName(btHide).visible(false);
}
} else {
if (FormRun.design().controlName(btHide)) {
FormRun.design().controlName(btHide).visible(True);
}
}
standard code deleted
}
-Original Message-
From: James Flavell [mailto:[EMAIL PROTECTED]
Sent: Saturday, 19 February 2005 12:51 PM
To: development-axapta@yahoogroups.com
Subject: RE: [development-axapta] Dynamic form changes possible?
Thanks Carsten,
I have been debuggin alot in all these classes but I meant I could not
find
the line(s) of code that change the form layout (like what I managed to
find
for the security) even in the SysSaveSetup class.
I will go back and look some more.
Thanks for the job example I think that will make debugging a little
easier
Thanks a lot
James
-Original Message-
From: Carsten F. Frandsen [mailto:[EMAIL PROTECTED]
Sent: 16 February 2005 18:45
To: development-axapta@yahoogroups.com
Subject: SV: [development-axapta] Dynamic form changes possible?
There is another class SysSaveSetup which are used by the
SysSetupFormRun
class - SysSaveSetup class are used for saving and retrieving a user
defined
design...
Also SysSetupFormRun class are used by any form in Axapta - AFAIR it is
the
SysSetupFormRun class which actually executes the form !
Try entering the follwing job with a break-point - the use the debugger
to
investigate how the form is activated.
static void job1(Args _args)
{
Args args = new Args(formStr(InventItemGroup));
FormRun formRun;
;
formRun = ClassFactory::formRunClassOnClient(args); //
break-point
on this line.
formRun.init();
formRun.run();
formRun.wait();
}
HTH
Best regards
Carsten F. Frandsen
Fra: James Flavell [mailto:[EMAIL PROTECTED]
Sendt: ti 15-02-2005 14:42
Til: development-axapta@yahoogroups.com
Emne: RE: [development-axapta] Dynamic form changes possible?
Thanks Carsten,
I have been trying to make some sense of the SysSetupFrom classes but
still
dont seem to be able to find where the code for hidding a control the
user
has hidden previously is (i.e. where is it that the users setup gets
applied
to the form), any chance you could give me somewhere where I can see it
in
action?
I spotted in SysSecurityFormSetup.loadSecurity some examples of the
security
settings being applied, such as:
formControl =
SysSecurityFormSetup::getFormControl(_formRun,
mapIterator.key());
formControl.userSecurityLevel(accessType + 1);
which gives me an idea of how I can
Re: [development-axapta] Isolating Axapta Modifications until Tested
Hi, As a standard installation procedure one should keep Live and Test environment separte. This can be done in Axapta. 1) You can copy the Standard folder under the Axapta Application and rename it as Live , and Test. 2) Create database AXLIVE and AXTEST 3) Create 2 copies of Configuration utility and change the Application directory to point to AXLIVE and AXTEST application folders and also see that your ODBC in case of 2 tier is pointing to correct database. In case of 3-tier , you need to create multiple AOS pointing to the databases. There you go. HK [EMAIL PROTECTED] wrote: Hi All, Does anyone have a scheme for modifying and testing Axapta so that the modifications are kept out of the ?live? Axapta system until they are fully tested? Or could you point me to the Axapta manual(s) or another resource where this is covered best covered? Thank You, Bob Bob Brinker Oakdene Group, Inc. 2625 Butterfield Rd. (Suite 212E) Oak Brook, IL 60523-1261 [EMAIL PROTECTED] [Non-text portions of this message have been removed] Yahoo! Groups SponsorADVERTISEMENT - Yahoo! Groups Links To visit your group on the web, go to: http://groups.yahoo.com/group/development-axapta/ To unsubscribe from this group, send an email to: [EMAIL PROTECTED] Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. - Do you Yahoo!? New and Improved Yahoo! Mail - Send 10MB messages! [Non-text portions of this message have been removed] Yahoo! Groups Sponsor ADVERTISEMENT Yahoo! Groups Links To visit your group on the web, go to:http://groups.yahoo.com/group/development-axapta/ To unsubscribe from this group, send an email to:[EMAIL PROTECTED] Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
Re: [development-axapta] Planned Purch Order Not Being Generated
Hi, Check the Covergae group settings, Negative days especially. HDK tlalor_1973 [EMAIL PROTECTED] wrote: Hi, Has anyone seen this problem ? This is Axapta SP3, thanks in advance: Our Client has 1 Main Warehouse which is used to refill several Remote warehouses. The Refilling logic is done at the Item Coverage Level and not at the warehouse level, (remote warehouse is not set to be always refilled from the main warehouse). Where there is insufficient stock in the Main warehouse, a Planned Purchase Order is created (for main warehouse) and a Planned Transfer Order is created to supply the remote warehouse. This holds true for only 2 remote warehouses, if more than 2 are to be refilled from the main warehouse only the Planned Transfer Order is created. . . .not the Planned Purchase Order to replenish the main warehouse. The problem is not Item Specific as any item will work with the same 2 warehouses. Yahoo! Groups SponsorADVERTISEMENT - Yahoo! Groups Links To visit your group on the web, go to: http://groups.yahoo.com/group/development-axapta/ To unsubscribe from this group, send an email to: [EMAIL PROTECTED] Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. - Do you Yahoo!? Yahoo! Mail Address AutoComplete - You start. We finish. [Non-text portions of this message have been removed] Yahoo! Groups Sponsor ADVERTISEMENT Yahoo! Groups Links To visit your group on the web, go to:http://groups.yahoo.com/group/development-axapta/ To unsubscribe from this group, send an email to:[EMAIL PROTECTED] Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
Re: [development-axapta] Re: Inserting a logo in main menu
Hi, It works only if the .bmp file is a 24 bit. HK manjushree dave [EMAIL PROTECTED] wrote: I tried to insert logo but nothing happens. do we have to do something else before the step described below? Thank you Manjushree --- In [EMAIL PROTECTED], Sonny Wibawa Adi [EMAIL PROTECTED] wrote: Hi Satyanagara, Copy your client's company logo to $AXAPTA_DIR$\Application\Share\Include\ and rename it to CompanyLogo.BMP. It is worked on Axapta 3.0 SP2. Regards, Sonny Wibawa Adi L Manuel [EMAIL PROTECTED] wrote: replace logo.bmp file with the picture you want (should rename it LOGO.BMP in order to work). --- In [EMAIL PROTECTED], Joy Satyanagara [EMAIL PROTECTED] wrote: Hello all, nice to meet you all. I'm new in this group. I want to insert a logo or picture at main menu in axapta. Can it be done in axapta? what should i do? FYI i'm using Axapta 3.0 I'm looking for an or several answers from you all. Thanks = Regards, Joy Satyanagara __ Do you Yahoo!? Friends. Fun. Try the all-new Yahoo! Messenger. http://messenger.yahoo.com/ Yahoo! Groups SponsorADVERTISEMENT - Yahoo! Groups Links To visit your group on the web, go to: http://groups.yahoo.com/group/development-axapta/ To unsubscribe from this group, send an email to: [EMAIL PROTECTED] Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. - Do you Yahoo!? Friends. Fun. Try the all-new Yahoo! Messenger [Non-text portions of this message have been removed] Yahoo! Groups SponsorADVERTISEMENT - Yahoo! Groups Links To visit your group on the web, go to: http://groups.yahoo.com/group/development-axapta/ To unsubscribe from this group, send an email to: [EMAIL PROTECTED] Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. - Do you Yahoo!? Yahoo! Mail - 50x more storage than other providers! [Non-text portions of this message have been removed] Yahoo! Groups Sponsor ADVERTISEMENT Yahoo! Groups Links To visit your group on the web, go to:http://groups.yahoo.com/group/development-axapta/ To unsubscribe from this group, send an email to:[EMAIL PROTECTED] Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
[development-axapta] X++ source in Conversion Tab of Data Import
Hi, I am trying to write a code in the Conversion Tab of Data import for InventTable. I have 2 questions 1. Can I write a X++ code which can validate multiple fields, to be more clear and precise can I have a code to say validate Field1 and then validate Field2 in the same script. 2. Can anyone send me a sample code just as an example. Thanks, HK - Do you Yahoo!? SBC Yahoo! - Internet access at a great low price. [Non-text portions of this message have been removed] Yahoo! Groups Links To visit your group on the web, go to:http://groups.yahoo.com/group/development-axapta/ To unsubscribe from this group, send an email to:[EMAIL PROTECTED] Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
Re: RE : [development-axapta] Can't create document handling note on an invoiced sales order
Hi Steeve, Did you check the Document Handling option in Basic SetupDocument Handling The form provides on which Tables you can manage doucments / or attach documents. Since you are abl to attach documents on other options/forms , I think you have security clearance for document Handling as such. HKSteeve Gilbert [EMAIL PROTECTED] wrote: Hmmm... I'm not talking about lookup, or maybe I don't get your answer. I'll put it simple : Why on invoiced sales order I can't create document handling note (Table DocuRef) and on others I can.Steeve... -Message d'origine-De: ax [mailto:[EMAIL PROTECTED] Envoyé: 24 mars 2004 02:47À: [EMAIL PROTECTED]Objet: Re: [development-axapta] Can't create document handling note on an invoiced sales orderIn lookup form try to do this through datasource query and exclude thisvalue... If there is no any lookup form and lookup is through tablegroup,then think if new lookup form is needed.Kuni- Original Message - From: "Steeve Gilbert" [EMAIL PROTECTED]To: [EMAIL PROTECTED]Sent: Tuesday, March 23, 2004 11:24 PMSubject: [development-axapta] Can't create document handling note on aninvoiced sales order Hi All! Simple question but still, I can't solve it. Just wandering where's the condition that checks if the sales order is invoiced to prevent the creation of document handling note on it? I want to enable it even if the sales order is invoiced. Regards, Steeve... Yahoo! Groups LinksYahoo! Groups LinksDo you Yahoo!? Yahoo! Finance Tax Center - File online. File on time. Yahoo! Groups Links To visit your group on the web, go to:http://groups.yahoo.com/group/development-axapta/ To unsubscribe from this group, send an email to:[EMAIL PROTECTED] Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
[development-axapta] Extract Data and Create a delimited Text File
Hi , I want to extract data from Axapta 3.0and output as a Text Delimited file. I want routine to be run by user during month end and pass this data to another application on a different Hardware platform, can anybody give me some idea as to how should start or anybody has any code / routine which I can make use of to start my little project. Thanks for the help in advance. HKDo you Yahoo!? Yahoo! Mail - More reliable, more storage, less spam Yahoo! Groups Sponsor ADVERTISEMENT Yahoo! Groups Links To visit your group on the web, go to:http://groups.yahoo.com/group/development-axapta/ To unsubscribe from this group, send an email to:[EMAIL PROTECTED] Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
[development-axapta] How to Call more than one report in Axapta
Hi , I have developed an auto report and would like to call it from the existing Axapta report. Can anyone please guide me how to do that. I want to call this report from the ProductionReportsProduction PapersRoute Card option. I created an MenuFunction and instantiated sequentially in fetch method, but the results are not as per what I desire. Since I created the Menufunctionand Instantiated in fetch method the Production Route card report runs first then display a range selection screen for running the auto report I created,I would like this report to use the same Query range as entered for the Production Route Card printing , so that the user just enters the range one time and the report is printed. Thanksin advance. HDK Do you Yahoo!? Yahoo! SiteBuilder - Free web site building tool. Try it! Yahoo! Groups Links To visit your group on the web, go to:http://groups.yahoo.com/group/development-axapta/ To unsubscribe from this group, send an email to:[EMAIL PROTECTED] Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
[development-axapta] Automated Email message for New Users
Hi, I am using Axpata 3.0 SP1 and my email client is Micrsoft Outlook , which is configured. I have 2 problems A) How to send an automated email message to newly created Axapta users. During creation of User Id using wizard, I can see a message that Automated Email message will be sent to the user, so specify the correct email id of the user. But I haven't seen any messages being sent thru my email. I have done the following setup 1) created a email message Id and Message under BASIC Email Messages. 2) setup my email paramrters undere Administration Setup Email Parameters. I am able to send Axapta Reports as email attachment, so that proves my MAPI client is working. B) Also when I click Email Broadcast, and select all users , I get a error message No message was sent. Language was not found. Anybody has ideas about setting up this feature or am I missing something. Thanks , Hemant _ Do you Yahoo!? The New Yahoo! Shopping - with improved product search Yahoo! Groups Sponsor ADVERTISEMENT Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
[development-axapta] How to display a field in Grid form
Hi All, I want to display a new field which is added in InventTable on 2 forms. BOMTABLE, BOMCONSISTSOF (in the GRID) I created the field in InventTable and I am able to maintain it on InventTable Form. Also verified by browsing the table to see if the value of field is getting added fro every Item record. So far everthing is nice. Now I added InventTable to datasource of BOMTABLE form and also modified the BOMTABLE form under Group:VersionGrp Grid to display the new field, with property of EDIT set to NO. But I am not able to display the value of the field. When I try to add the field in BOMCONSISTSOF it is giving me the follwoing error during compilation Aplication object Name : BomConsistsOf Method/Property Name : init Error Message : The name inventTable is already used in an outer scope. Can somebody help me. Appreciate your response Hemant _ Do you Yahoo!? The New Yahoo! Shopping - with improved product search Yahoo! Groups Sponsor ADVERTISEMENT click here Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
[development-axapta] Standard Cost Rollup and Revaluation
Hi, I wanted to know whether AXAPTA creates a revaluation entry for posting once the cost roll up is done. Normally most of the ERP packages do the cost roll up and creates a journal entry to be posted to General Ledger as Profit / Loss after cost roll up. I havent seen that happening in Axpata. We are using Standard Cost and Axpata 3.0 SP1 Thanks in advance, Hemant _ Do you Yahoo!? Protect your identity with Yahoo! Mail AddressGuard Yahoo! Groups Sponsor ADVERTISEMENT click here Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
[development-axapta] Display User Defined Fields on Grid
Hi, I have added some new fields to InventTable , and they are supposed to be displayed on BOMConsistof form. These fields are Item Drawing number and Item Revision numbers. I have modified the the BOMConsistsof Form. I have encountered the following problems and don't know how to overcome them , please help me. 1. When I create a new BOM in BOMConsistof form i.e Items BOM Lines I am able to see Item Revision and Drawing number corresponding to the BOM version which were previously defined, but when I create a New BOM Version , I am not able to view the same fields. 2. When I add new BOM lines to the BOM , and I try to save or try to add more lines I get an error for the following fields - Item Group must be defined - Item Type must be defined - Inventory Model Group must be defined These errors seems to be displayed as if I am trying to add new Item to InventTable. I had to define InventTable twice one for displaying Item Revision and Drawin numbers at the BOM version and next for BOM lines. I have defined in data sources InventTable1 InventTable InventTable2 InventTable Can somebody guide me as to how the above errors can be overcome and the form works properly without diplaying any errors. Thanks in advance HDK _ Do you Yahoo!? Protect your identity with Yahoo! Mail AddressGuard Yahoo! Groups Sponsor ADVERTISEMENT click here Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
