Re: [Dhis2-users] Demo 2.29 Down

[Terence Scott]

I do too.


Terence Scott

Global Alliance for Rabies Control (GARC)
Pan-African Rabies Control Network (PARACON) Steering Committee
terence.sc...@rabiesalliance.org
https://paracon.rabiesalliance.org
Skype: tpscott1987



On Wed, Nov 14, 2018 at 1:40 PM Damien Scarlett <
damien.scarl...@brussels.msf.org> wrote:

> I do as well
>
>
>
> *From:* Dhis2-users  brussels.msf@lists.launchpad.net> *On Behalf Of *kelvin murumba
> *Sent:* Wednesday, 14 November 2018 12:15 PM
> *To:* dhis2-users@lists.launchpad.net
> *Subject:* [Dhis2-users] Demo 2.29 Down
>
>
>
> I am getting a Bad getaway error for the demo server. Any one experiencing
> the same?
>
> --
>
>
>
> Kelvin Murumba
> Software Engineer,
>
> Tel: +254 720 310 436,
>
> Skype: kevmurumba,
> Nairobi, Kenya
> ___
> Mailing list: https://launchpad.net/~dhis2-users
> Post to : dhis2-users@lists.launchpad.net
> Unsubscribe : https://launchpad.net/~dhis2-users
> More help   : https://help.launchpad.net/ListHelp
>
___
Mailing list: https://launchpad.net/~dhis2-users
Post to : dhis2-users@lists.launchpad.net
Unsubscribe : https://launchpad.net/~dhis2-users
More help   : https://help.launchpad.net/ListHelp

Re: [Dhis2-users] [Dhis2-devs] Relationships - relationship link not showing on TE #2

[Terence Scott]

Great, thanks Markus - I have reported it in JIRA: DHIS2-5249
<https://jira.dhis2.org/browse/DHIS2-5249>

I am always just cautious of reporting anything in JIRA before checking to
see if I missed something.

Thanks for the help!

Kind regards,
Terence


Terence Scott

Global Alliance for Rabies Control (GARC)
Pan-African Rabies Control Network (PARACON) Steering Committee
terence.sc...@rabiesalliance.org
https://paracon.rabiesalliance.org
Skype: tpscott1987



On Wed, Nov 14, 2018 at 1:29 PM Markus Bekken  wrote:

> Hey Terence,
> It would be great if you put this into a jira bug. The relationship you
> send a screenshot of below is a TEI-TEI relationship, which should be
> supported. In the preliminary investigation it also seems that nonsupported
> relationship is not always gracefully handled in the tracker.
>
> Thanks for reporting. We will get back to you if we see any possible
> workarounds in the investigation.
>
> Markus
>
> 14. nov. 2018 kl. 11:36 skrev Terence Scott <
> terence.sc...@rabiesalliance.org>:
>
> Dear Markus
>
> Thanks for the response. I will create any new conversations in the
> community forum as mentioned.
>
> Relating to my current issue, we are creating relationships between two
> different enrollments in 2 different programs (One program for a suspect
> animal and the other for an exposed human). I would like to link the
> "exposed animal" to the "exposed human" (each a relationship type).
> Therefore, for the "Exposed person" relationship type, I have the "Exposed
> Animal" linked with the Suspect animal program, followed by the second TE
> type being the exposed person linked with the Exposed human program. The
> "From constraint" is "TE instance".
>
> I tried to do the same with the "Exposed animal" Relationship type, but
> this resulted in some other errors which I thought were attributed to
> redundancy. Therefore, for the moment, I only have the "Exposed person"
> relationship type set up.
>
> Under each of the programs themselves, I have also selected the relevant
> TE type. Under "Related program" I selected the sister program (i.e. for
> the Suspect animal program, I selected exposed human and visa versa).
>
> I hope I managed to explain this clearly. I have attached a screenshot of
> how I set up the relationship type for your reference.
>
> Kind regards,
> Terence
>
>
> Terence Scott
>
> Global Alliance for Rabies Control (GARC)
> Pan-African Rabies Control Network (PARACON) Steering Committee
> terence.sc...@rabiesalliance.org
> https://paracon.rabiesalliance.org
> Skype: tpscott1987
>
>
>
> On Wed, Nov 14, 2018 at 10:56 AM Markus Bekken  wrote:
>
>> Hey Terence,
>> you mention programs are you making relations from one enrollment to
>> another? How is your relationship type set up? The only relationship type
>> that is supported in the tracker clients is tracked entity instance to
>> tracked entity instance. The rich possibilities in the new relationship
>> model is starting to be consumed in the new capture app first, and is per
>> now  not scheduled to be implemented in the current generation of tracker
>> app.
>>
>> Markus
>>
>> P.S. we are moving these topics to the community.dhis2.org - a great
>> tool for collaborating, discussing in threads and building a searchable
>> knowledge base at the same time.
>>
>> 13. nov. 2018 kl. 13:42 skrev Terence Scott <
>> terence.sc...@rabiesalliance.org>:
>>
>> Dear Community
>>
>> I have been working on creating relationships between two programs. I
>> have managed to create a relationship from 1 program to the other. However,
>> on the enrollment screen for the 2nd TE (TE#2), no program is selected. I
>> then select the appropriate program, but the relationship to the original
>> TE (TE#1) is lost.
>>
>> I assume that there is something that I am missing here? I have specified
>> the referred and original programs for the Tracked Entity Type, yet this
>> does not work.
>>
>> I also get the following reference error:
>> 
>>
>>
>> I am running v2.30.
>>
>> Any help or guidance would be appreciated.
>>
>> Kind regards,
>> Terence
>>
>>
>> Terence Scott
>>
>> Global Alliance for Rabies Control (GARC)
>> Pan-African Rabies Control Network (PARACON) Steering Committee
>> terence.sc...@rabiesalliance.org
>> https://paracon.rabiesalliance.org
>> Skype: tpscott1987
>>
>> ___
>> Mailing list: https://launchpad.net/~dhis2-devs
>> Post to : dhis2-d...@lists.launchpad.net
>> Unsubscribe : https://launchpad.net/~dhis2-devs
>> More help   : https://help.launchpad.net/ListHelp
>>
>>
>> 
>
>
>
___
Mailing list: https://launchpad.net/~dhis2-users
Post to : dhis2-users@lists.launchpad.net
Unsubscribe : https://launchpad.net/~dhis2-users
More help   : https://help.launchpad.net/ListHelp

Re: [Dhis2-users] [Dhis2-devs] Relationships - relationship link not showing on TE #2

[Terence Scott]

Dear Markus

Thanks for the response. I will create any new conversations in the
community forum as mentioned.

Relating to my current issue, we are creating relationships between two
different enrollments in 2 different programs (One program for a suspect
animal and the other for an exposed human). I would like to link the
"exposed animal" to the "exposed human" (each a relationship type).
Therefore, for the "Exposed person" relationship type, I have the "Exposed
Animal" linked with the Suspect animal program, followed by the second TE
type being the exposed person linked with the Exposed human program. The
"From constraint" is "TE instance".

I tried to do the same with the "Exposed animal" Relationship type, but
this resulted in some other errors which I thought were attributed to
redundancy. Therefore, for the moment, I only have the "Exposed person"
relationship type set up.

Under each of the programs themselves, I have also selected the relevant TE
type. Under "Related program" I selected the sister program (i.e. for the
Suspect animal program, I selected exposed human and visa versa).

I hope I managed to explain this clearly. I have attached a screenshot of
how I set up the relationship type for your reference.

Kind regards,
Terence


Terence Scott

Global Alliance for Rabies Control (GARC)
Pan-African Rabies Control Network (PARACON) Steering Committee
terence.sc...@rabiesalliance.org
https://paracon.rabiesalliance.org
Skype: tpscott1987



On Wed, Nov 14, 2018 at 10:56 AM Markus Bekken  wrote:

> Hey Terence,
> you mention programs are you making relations from one enrollment to
> another? How is your relationship type set up? The only relationship type
> that is supported in the tracker clients is tracked entity instance to
> tracked entity instance. The rich possibilities in the new relationship
> model is starting to be consumed in the new capture app first, and is per
> now  not scheduled to be implemented in the current generation of tracker
> app.
>
> Markus
>
> P.S. we are moving these topics to the community.dhis2.org - a great tool
> for collaborating, discussing in threads and building a searchable
> knowledge base at the same time.
>
> 13. nov. 2018 kl. 13:42 skrev Terence Scott <
> terence.sc...@rabiesalliance.org>:
>
> Dear Community
>
> I have been working on creating relationships between two programs. I have
> managed to create a relationship from 1 program to the other. However, on
> the enrollment screen for the 2nd TE (TE#2), no program is selected. I then
> select the appropriate program, but the relationship to the original TE
> (TE#1) is lost.
>
> I assume that there is something that I am missing here? I have specified
> the referred and original programs for the Tracked Entity Type, yet this
> does not work.
>
> I also get the following reference error:
> 
>
>
> I am running v2.30.
>
> Any help or guidance would be appreciated.
>
> Kind regards,
> Terence
>
>
> Terence Scott
>
> Global Alliance for Rabies Control (GARC)
> Pan-African Rabies Control Network (PARACON) Steering Committee
> terence.sc...@rabiesalliance.org
> https://paracon.rabiesalliance.org
> Skype: tpscott1987
>
> ___
> Mailing list: https://launchpad.net/~dhis2-devs
> Post to : dhis2-d...@lists.launchpad.net
> Unsubscribe : https://launchpad.net/~dhis2-devs
> More help   : https://help.launchpad.net/ListHelp
>
>
>
___
Mailing list: https://launchpad.net/~dhis2-users
Post to : dhis2-users@lists.launchpad.net
Unsubscribe : https://launchpad.net/~dhis2-users
More help   : https://help.launchpad.net/ListHelp

Re: [Dhis2-users] How to create entity attribute with generated value based on others elements

[Terence Scott]

HI Gerard

Yes, this is possible with Text Pattern as mentioned previously.

One thing I would like to point out is that you create this all in the TE
attribute. Therefore, create an attribute (e.g. Unique ID) and then select
"Automatically generate".

In the pattern, you can then enter the TextPattern that you require. Please
note that to create a string, you separate with - and not with +. This is
an example I created:
CURRENT_DATE(-MM-ww)-"-"-ORG_UNIT_CODE(.)-"-"-"A"-SEQUENTIAL(###)

The "-" creates the dashes between the various variables, while the -
separates the variables.

The number of dots and hashes in the OU code and Sequential relate to the
number of items shown.

I hope this helps.

Kind regards,
Terence

Terence Scott

Global Alliance for Rabies Control (GARC)
Pan-African Rabies Control Network (PARACON) Steering Committee
terence.sc...@rabiesalliance.org
https://paracon.rabiesalliance.org
Skype: tpscott1987



On Wed, Nov 14, 2018 at 8:32 AM Em Le Hong  wrote:

> Hi,
>
> You can use Text Pattern
> https://docs.dhis2.org/2.30/en/user/html/working-with-textpattern.html
>
> Good luck!
>
> On Wed, Nov 14, 2018 at 12:51 PM Gérard Bisama 
> wrote:
>
>> Hi everyone,
>>
>> I am using tracker and I want to create a entity attribute with generated
>> value that depending on other attributes values like :
>> - code of the orgunit assigned to program
>> - value of the field sex
>> - followed by random number of 4 digit.
>> Each of them separated with "-".
>> Do some one have an idea on how to achieve this?
>>
>> Thanks,
>> --
>> Gérard Bisama
>> Tel:+243810890810
>> ___
>> Mailing list: https://launchpad.net/~dhis2-users
>> Post to : dhis2-users@lists.launchpad.net
>> Unsubscribe : https://launchpad.net/~dhis2-users
>> More help   : https://help.launchpad.net/ListHelp
>>
>
>
> --
> *Em Le Hong*
> DHIS2 Implementation| *HISP Vietnam *
> em.hispviet...@gmail.com | *Skype:* em.hispviet...@gmail.com
>
>
>
>
>
> ___
> Mailing list: https://launchpad.net/~dhis2-users
> Post to : dhis2-users@lists.launchpad.net
> Unsubscribe : https://launchpad.net/~dhis2-users
> More help   : https://help.launchpad.net/ListHelp
>
___
Mailing list: https://launchpad.net/~dhis2-users
Post to : dhis2-users@lists.launchpad.net
Unsubscribe : https://launchpad.net/~dhis2-users
More help   : https://help.launchpad.net/ListHelp

[Dhis2-users] Relationships - relationship link not showing on TE #2

[Terence Scott]

Dear Community

I have been working on creating relationships between two programs. I have
managed to create a relationship from 1 program to the other. However, on
the enrollment screen for the 2nd TE (TE#2), no program is selected. I then
select the appropriate program, but the relationship to the original TE
(TE#1) is lost.

I assume that there is something that I am missing here? I have specified
the referred and original programs for the Tracked Entity Type, yet this
does not work.

I also get the following reference error:
[image: Relationship - Reference Error.png]


I am running v2.30.

Any help or guidance would be appreciated.

Kind regards,
Terence


Terence Scott

Global Alliance for Rabies Control (GARC)
Pan-African Rabies Control Network (PARACON) Steering Committee
terence.sc...@rabiesalliance.org
https://paracon.rabiesalliance.org
Skype: tpscott1987
___
Mailing list: https://launchpad.net/~dhis2-users
Post to : dhis2-users@lists.launchpad.net
Unsubscribe : https://launchpad.net/~dhis2-users
More help   : https://help.launchpad.net/ListHelp

Re: [Dhis2-users] Syntax error - Mandatory attributes always required

[Terence Scott]

Dear All

It seems that there was some sort of error with the custom form. I changed
the program to auto-generate a form and this resolved the issue. I am still
not sure what would have caused this problem, as all of the same TEAs were
used. Therefore, I suspect that this could possibly be a bug?

Kind regards,
Terence

Terence Scott

Global Alliance for Rabies Control (GARC)
Pan-African Rabies Control Network (PARACON) Steering Committee
terence.sc...@rabiesalliance.org
https://paracon.rabiesalliance.org
Skype: tpscott1987



On Thu, Nov 8, 2018 at 9:57 AM Terence Scott <
terence.sc...@rabiesalliance.org> wrote:

> Dear All
>
> I am struggling with mandatory attributes in a Tracker program. I have
> ensured that all of the attributes are not mandatory, and that none of the
> attributes defined to a tracked entity are defined. However, the
> registration form continues to show that all of the fields are required
> fields.
>
> I have taken a screenshot of the syntax error that I receive on the
> console, but I do not have the knowledge to understand what it means.
>
> Please see attached screenshot.
>
> *I assume that this is some setting that I have missed or some mistake
> that I have made*, as this does not happen with any of my other tracker
> programs.
>
> Any help or guidance would be much appreciated.
>
> Kind regards,
> Terence
>
>
> Terence Scott
>
> Global Alliance for Rabies Control (GARC)
> Pan-African Rabies Control Network (PARACON) Steering Committee
> terence.sc...@rabiesalliance.org
> https://paracon.rabiesalliance.org
> Skype: tpscott1987
> [image: Mandatory attributes error.png]
>
___
Mailing list: https://launchpad.net/~dhis2-users
Post to : dhis2-users@lists.launchpad.net
Unsubscribe : https://launchpad.net/~dhis2-users
More help   : https://help.launchpad.net/ListHelp

[Dhis2-users] Syntax error - Mandatory attributes always required

[Terence Scott]

Dear All

I am struggling with mandatory attributes in a Tracker program. I have
ensured that all of the attributes are not mandatory, and that none of the
attributes defined to a tracked entity are defined. However, the
registration form continues to show that all of the fields are required
fields.

I have taken a screenshot of the syntax error that I receive on the
console, but I do not have the knowledge to understand what it means.

Please see attached screenshot.

*I assume that this is some setting that I have missed or some mistake that
I have made*, as this does not happen with any of my other tracker programs.

Any help or guidance would be much appreciated.

Kind regards,
Terence


Terence Scott

Global Alliance for Rabies Control (GARC)
Pan-African Rabies Control Network (PARACON) Steering Committee
terence.sc...@rabiesalliance.org
https://paracon.rabiesalliance.org
Skype: tpscott1987
[image: Mandatory attributes error.png]
___
Mailing list: https://launchpad.net/~dhis2-users
Post to : dhis2-users@lists.launchpad.net
Unsubscribe : https://launchpad.net/~dhis2-users
More help   : https://help.launchpad.net/ListHelp

Re: [Dhis2-users] Error while entering event capture

[Terence Scott]

Dear Fahad

This seems to be an issue relating to your user permissions. Are you logged
in as a Superadmin?

Alternatively, try checking the rights attributed to your user group for
that specific program.

Kind regards,
Terence

Terence Scott

Global Alliance for Rabies Control (GARC)
Pan-African Rabies Control Network (PARACON) Steering Committee
terence.sc...@rabiesalliance.org
https://paracon.rabiesalliance.org
Skype: tpscott1987



On Wed, Nov 7, 2018 at 9:27 AM Fahad Siddiqui  wrote:

> Hi!
>
> I am using dhis2 v2.29 deployed over bao hosting. whenever i click to
> event capture then it shows the error attached in the screen shot.
>
>
>
>
>
> Best Regards,
> Fahad Raza
>
> Sent from Outlook <http://aka.ms/weboutlook>
> ___
> Mailing list: https://launchpad.net/~dhis2-users
> Post to : dhis2-users@lists.launchpad.net
> Unsubscribe : https://launchpad.net/~dhis2-users
> More help   : https://help.launchpad.net/ListHelp
>
___
Mailing list: https://launchpad.net/~dhis2-users
Post to : dhis2-users@lists.launchpad.net
Unsubscribe : https://launchpad.net/~dhis2-users
More help   : https://help.launchpad.net/ListHelp

Re: [Dhis2-users] [Dhis2-devs] Generating sequential numbers in program rule

[Terence Scott]

Dear Zubair

Thank you for this recommendation. I have created the JIRA issue as
suggested: DHIS2-5094 <https://jira.dhis2.org/browse/DHIS2-5094>

Kind regards,
Terence

Terence Scott

Global Alliance for Rabies Control (GARC)
Pan-African Rabies Control Network (PARACON) Steering Committee
terence.sc...@rabiesalliance.org
https://paracon.rabiesalliance.org
Skype: tpscott1987



On Thu, Nov 1, 2018 at 10:54 AM Zubair Asghar Raja  wrote:

> Hi Terence,
> Create a JIRA issue for this enhancement (ENROLLMENT_DATE) and we will
> look into it.
>
>
>
>
>
> Den tor. 1. nov. 2018, 9:21 a.m. skrev Terence Scott <
> terence.sc...@rabiesalliance.org:
>
>> Dear Shurajit
>>
>> Thanks for the advice. This worked fantastically - however, the
>> documentation is a little confusing with regards to the required format. Is
>> there somewhere where I can possibly make suggestions for clarification?
>>
>> The string that eventually worked under the Auto-generate section is as
>> follows:
>> CURRENT_DATE(-MM)-"-"-ORG_UNIT_CODE(...)-"-"-SEQUENTIAL()
>>
>> The '+' did not work for me and gave a parse error - this is what is
>> specified in some parts of the documentation, whereas using the '-' worked
>> (as is shown in one example under "SEQUENTIAL(format)".
>>
>> It seems that currently only CURRENT_DATE is supported and not enrollment
>> date? Is there some way to include Enrollment date instead? I tried to
>> simply include ENROLLMENT_DATE(yyyy-MM) and this did not work.
>>
>> Thank you once again for the help! Really appreciate it as I have been
>> struggling with this for a while.
>>
>> Kind regards,
>> Terence
>>
>> Terence Scott
>>
>> Global Alliance for Rabies Control (GARC)
>> Pan-African Rabies Control Network (PARACON) Steering Committee
>> terence.sc...@rabiesalliance.org
>> https://paracon.rabiesalliance.org
>> Skype: tpscott1987
>>
>>
>>
>> On Thu, Nov 1, 2018 at 3:46 AM Shurajit Dutta 
>> wrote:
>>
>>> Hi Terence
>>>
>>> This textpattern applies to generating unique tracked entity attributes.
>>> So if you make the attribute unique and then system generated you can enter
>>> the pattern accordingly:
>>>
>>> [image: image.png]
>>>
>>> On Wed, Oct 31, 2018 at 5:58 PM Terence Scott <
>>> terence.sc...@rabiesalliance.org> wrote:
>>>
>>>> Hi MSP
>>>>
>>>> Thank you for the suggestion. I have also attempted this and was unable
>>>> to have any success. I tried to create a new rule with simply having
>>>> "Sequential(###)" alone, and did not have any success either. Therefore, I
>>>> assumed that there would be some sort of additional text that is required
>>>> to make it work.
>>>>
>>>> Kind regards,
>>>> Terence
>>>>
>>>> Terence Scott
>>>>
>>>> Global Alliance for Rabies Control (GARC)
>>>> Pan-African Rabies Control Network (PARACON) Steering Committee
>>>> terence.sc...@rabiesalliance.org
>>>> https://paracon.rabiesalliance.org
>>>> Skype: tpscott1987
>>>>
>>>>
>>>>
>>>> On Tue, Oct 30, 2018 at 5:49 PM M.Selvaraaj Prabu 
>>>> wrote:
>>>>
>>>>> Hi Terrance,
>>>>>
>>>>> Sometime back I read about this. I think you need to use the
>>>>> expression like
>>>>>
>>>>>-
>>>>>
>>>>>ORG_UNIT_CODE(…) + "-" + CURRENT_DATE(ww) + "-" + SEQUENTIAL(#)
>>>>>
>>>>>
>>>>> Instead of using the function concatenate. Please refer the below link
>>>>> for more details:
>>>>>
>>>>>-
>>>>>
>>>>> https://docs.dhis2.org/master/en/user/html/working-with-textpattern.html
>>>>>
>>>>> Hope this helps.
>>>>>
>>>>> Thanks and regards
>>>>>
>>>>> MSP
>>>>>
>>>>>
>>>>> On Tue, Oct 30, 2018 at 4:56 PM Terence Scott <
>>>>> terence.sc...@rabiesalliance.org> wrote:
>>>>>
>>>>>> Dear Zubair, Nick
>>>>>>
>>>>>> I have upgraded the instance to 2.30 now and am attempting to once
>>>>>> again implement the 

Re: [Dhis2-users] [Dhis2-devs] Generating sequential numbers in program rule

[Terence Scott]

Dear Knut

Thank you - I will update as soon as possible with some of my
recommendations.

Kind regards,
Terence
Terence Scott

Global Alliance for Rabies Control (GARC)
Pan-African Rabies Control Network (PARACON) Steering Committee
terence.sc...@rabiesalliance.org
https://paracon.rabiesalliance.org
Skype: tpscott1987



On Thu, Nov 1, 2018 at 12:14 PM Knut Staring  wrote:

> Hi Terence, great to see it worked out.
>
> Just plugging the collaborative nature of the documentation effort as well
> ;-)
> https://docs.dhis2.org/master/en/implementer/html/doc_guide_chapter.html#
>
> On Thu, Nov 1, 2018 at 9:24 AM Terence Scott <
> terence.sc...@rabiesalliance.org> wrote:
>
>> Dear Shurajit
>>
>> Thanks for the advice. This worked fantastically - however, the
>> documentation is a little confusing with regards to the required format. Is
>> there somewhere where I can possibly make suggestions for clarification?
>>
>> The string that eventually worked under the Auto-generate section is as
>> follows:
>> CURRENT_DATE(-MM)-"-"-ORG_UNIT_CODE(...)-"-"-SEQUENTIAL()
>>
>> The '+' did not work for me and gave a parse error - this is what is
>> specified in some parts of the documentation, whereas using the '-' worked
>> (as is shown in one example under "SEQUENTIAL(format)".
>>
>> It seems that currently only CURRENT_DATE is supported and not enrollment
>> date? Is there some way to include Enrollment date instead? I tried to
>> simply include ENROLLMENT_DATE(-MM) and this did not work.
>>
>> Thank you once again for the help! Really appreciate it as I have been
>> struggling with this for a while.
>>
>> Kind regards,
>> Terence
>>
>> Terence Scott
>>
>> Global Alliance for Rabies Control (GARC)
>> Pan-African Rabies Control Network (PARACON) Steering Committee
>> terence.sc...@rabiesalliance.org
>> https://paracon.rabiesalliance.org
>> Skype: tpscott1987
>>
>>
>>
>> On Thu, Nov 1, 2018 at 3:46 AM Shurajit Dutta 
>> wrote:
>>
>>> Hi Terence
>>>
>>> This textpattern applies to generating unique tracked entity attributes.
>>> So if you make the attribute unique and then system generated you can enter
>>> the pattern accordingly:
>>>
>>> [image: image.png]
>>>
>>> On Wed, Oct 31, 2018 at 5:58 PM Terence Scott <
>>> terence.sc...@rabiesalliance.org> wrote:
>>>
>>>> Hi MSP
>>>>
>>>> Thank you for the suggestion. I have also attempted this and was unable
>>>> to have any success. I tried to create a new rule with simply having
>>>> "Sequential(###)" alone, and did not have any success either. Therefore, I
>>>> assumed that there would be some sort of additional text that is required
>>>> to make it work.
>>>>
>>>> Kind regards,
>>>> Terence
>>>>
>>>> Terence Scott
>>>>
>>>> Global Alliance for Rabies Control (GARC)
>>>> Pan-African Rabies Control Network (PARACON) Steering Committee
>>>> terence.sc...@rabiesalliance.org
>>>> https://paracon.rabiesalliance.org
>>>> Skype: tpscott1987
>>>>
>>>>
>>>>
>>>> On Tue, Oct 30, 2018 at 5:49 PM M.Selvaraaj Prabu 
>>>> wrote:
>>>>
>>>>> Hi Terrance,
>>>>>
>>>>> Sometime back I read about this. I think you need to use the
>>>>> expression like
>>>>>
>>>>>-
>>>>>
>>>>>ORG_UNIT_CODE(…) + "-" + CURRENT_DATE(ww) + "-" + SEQUENTIAL(#)
>>>>>
>>>>>
>>>>> Instead of using the function concatenate. Please refer the below link
>>>>> for more details:
>>>>>
>>>>>-
>>>>>
>>>>> https://docs.dhis2.org/master/en/user/html/working-with-textpattern.html
>>>>>
>>>>> Hope this helps.
>>>>>
>>>>> Thanks and regards
>>>>>
>>>>> MSP
>>>>>
>>>>>
>>>>> On Tue, Oct 30, 2018 at 4:56 PM Terence Scott <
>>>>> terence.sc...@rabiesalliance.org> wrote:
>>>>>
>>>>>> Dear Zubair, Nick
>>>>>>
>>>>>> I have upgraded the instance to 2.30 now and am attempting to once
>>>>>> ag

Re: [Dhis2-users] [Dhis2-devs] Generating sequential numbers in program rule

[Terence Scott]

Dear Shurajit

Thanks for the advice. This worked fantastically - however, the
documentation is a little confusing with regards to the required format. Is
there somewhere where I can possibly make suggestions for clarification?

The string that eventually worked under the Auto-generate section is as
follows:
CURRENT_DATE(-MM)-"-"-ORG_UNIT_CODE(...)-"-"-SEQUENTIAL()

The '+' did not work for me and gave a parse error - this is what is
specified in some parts of the documentation, whereas using the '-' worked
(as is shown in one example under "SEQUENTIAL(format)".

It seems that currently only CURRENT_DATE is supported and not enrollment
date? Is there some way to include Enrollment date instead? I tried to
simply include ENROLLMENT_DATE(-MM) and this did not work.

Thank you once again for the help! Really appreciate it as I have been
struggling with this for a while.

Kind regards,
Terence

Terence Scott

Global Alliance for Rabies Control (GARC)
Pan-African Rabies Control Network (PARACON) Steering Committee
terence.sc...@rabiesalliance.org
https://paracon.rabiesalliance.org
Skype: tpscott1987



On Thu, Nov 1, 2018 at 3:46 AM Shurajit Dutta 
wrote:

> Hi Terence
>
> This textpattern applies to generating unique tracked entity attributes.
> So if you make the attribute unique and then system generated you can enter
> the pattern accordingly:
>
> [image: image.png]
>
> On Wed, Oct 31, 2018 at 5:58 PM Terence Scott <
> terence.sc...@rabiesalliance.org> wrote:
>
>> Hi MSP
>>
>> Thank you for the suggestion. I have also attempted this and was unable
>> to have any success. I tried to create a new rule with simply having
>> "Sequential(###)" alone, and did not have any success either. Therefore, I
>> assumed that there would be some sort of additional text that is required
>> to make it work.
>>
>> Kind regards,
>> Terence
>>
>> Terence Scott
>>
>> Global Alliance for Rabies Control (GARC)
>> Pan-African Rabies Control Network (PARACON) Steering Committee
>> terence.sc...@rabiesalliance.org
>> https://paracon.rabiesalliance.org
>> Skype: tpscott1987
>>
>>
>>
>> On Tue, Oct 30, 2018 at 5:49 PM M.Selvaraaj Prabu 
>> wrote:
>>
>>> Hi Terrance,
>>>
>>> Sometime back I read about this. I think you need to use the expression
>>> like
>>>
>>>-
>>>
>>>ORG_UNIT_CODE(…) + "-" + CURRENT_DATE(ww) + "-" + SEQUENTIAL(#)
>>>
>>>
>>> Instead of using the function concatenate. Please refer the below link
>>> for more details:
>>>
>>>-
>>>https://docs.dhis2.org/master/en/user/html/working-with-textpattern.html
>>>
>>> Hope this helps.
>>>
>>> Thanks and regards
>>>
>>> MSP
>>>
>>>
>>> On Tue, Oct 30, 2018 at 4:56 PM Terence Scott <
>>> terence.sc...@rabiesalliance.org> wrote:
>>>
>>>> Dear Zubair, Nick
>>>>
>>>> I have upgraded the instance to 2.30 now and am attempting to once
>>>> again implement the sequential numbering using the TextPattern option. I am
>>>> using it on a TEAttribute, but have not had any success.
>>>>
>>>> Thus far, my Defined program rule action looks as follows:
>>>>
>>>> d2:concatenate( V{enrollment_date}, '-', V{orgunit_code}, '-')
>>>>
>>>> This is currently working and generating the UID, but of course,
>>>> without the sequential numbers. I have attempted the following combinations
>>>> to try include the sequential numbers to no avail:
>>>> d2:concatenate( V{enrollment_date}, '-', V{orgunit_code}, '-',
>>>> SEQUENTIAL(###))
>>>> d2:concatenate( V{enrollment_date}, '-', V{orgunit_code}, '-',
>>>> Sequential(###))
>>>> d2:concatenate( V{enrollment_date}, '-', V{orgunit_code}, '-',
>>>> V{Sequential(###)})
>>>> d2:concatenate( V{enrollment_date}, '-', V{orgunit_code}, '-',
>>>> V{sequential(###)})
>>>> d2:concatenate( V{enrollment_date}, '-', V{orgunit_code}, '-',
>>>> V{sequential###})
>>>> d2:concatenate( V{enrollment_date}, '-', V{orgunit_code}, '-',
>>>> 'SEQUENTIAL(###)') - this one simply added the text in (as suspected).
>>>> d2:concatenate( V{enrollment_date}, '-', V{orgunit_code}, '-&#x

Re: [Dhis2-users] [Dhis2-devs] Generating sequential numbers in program rule

[Terence Scott]

Hi MSP

Thank you for the suggestion. I have also attempted this and was unable to
have any success. I tried to create a new rule with simply having
"Sequential(###)" alone, and did not have any success either. Therefore, I
assumed that there would be some sort of additional text that is required
to make it work.

Kind regards,
Terence

Terence Scott

Global Alliance for Rabies Control (GARC)
Pan-African Rabies Control Network (PARACON) Steering Committee
terence.sc...@rabiesalliance.org
https://paracon.rabiesalliance.org
Skype: tpscott1987



On Tue, Oct 30, 2018 at 5:49 PM M.Selvaraaj Prabu  wrote:

> Hi Terrance,
>
> Sometime back I read about this. I think you need to use the expression
> like
>
>-
>
>ORG_UNIT_CODE(…) + "-" + CURRENT_DATE(ww) + "-" + SEQUENTIAL(#)
>
>
> Instead of using the function concatenate. Please refer the below link for
> more details:
>
>-
>https://docs.dhis2.org/master/en/user/html/working-with-textpattern.html
>
> Hope this helps.
>
> Thanks and regards
>
> MSP
>
>
> On Tue, Oct 30, 2018 at 4:56 PM Terence Scott <
> terence.sc...@rabiesalliance.org> wrote:
>
>> Dear Zubair, Nick
>>
>> I have upgraded the instance to 2.30 now and am attempting to once again
>> implement the sequential numbering using the TextPattern option. I am using
>> it on a TEAttribute, but have not had any success.
>>
>> Thus far, my Defined program rule action looks as follows:
>>
>> d2:concatenate( V{enrollment_date}, '-', V{orgunit_code}, '-')
>>
>> This is currently working and generating the UID, but of course, without
>> the sequential numbers. I have attempted the following combinations to try
>> include the sequential numbers to no avail:
>> d2:concatenate( V{enrollment_date}, '-', V{orgunit_code}, '-',
>> SEQUENTIAL(###))
>> d2:concatenate( V{enrollment_date}, '-', V{orgunit_code}, '-',
>> Sequential(###))
>> d2:concatenate( V{enrollment_date}, '-', V{orgunit_code}, '-',
>> V{Sequential(###)})
>> d2:concatenate( V{enrollment_date}, '-', V{orgunit_code}, '-',
>> V{sequential(###)})
>> d2:concatenate( V{enrollment_date}, '-', V{orgunit_code}, '-',
>> V{sequential###})
>> d2:concatenate( V{enrollment_date}, '-', V{orgunit_code}, '-',
>> 'SEQUENTIAL(###)') - this one simply added the text in (as suspected).
>> d2:concatenate( V{enrollment_date}, '-', V{orgunit_code}, '-') +
>> SEQUENTIAL(###)
>>
>> None of these combinations have worked thus far. Clearly I am
>> misunderstanding something or missing something and would appreciate any
>> help.
>>
>> Kind regards,
>> Terence
>>
>>
>> Terence Scott
>>
>> Global Alliance for Rabies Control (GARC)
>> Pan-African Rabies Control Network (PARACON) Steering Committee
>> terence.sc...@rabiesalliance.org
>> https://paracon.rabiesalliance.org
>> Skype: tpscott1987
>>
>>
>>
>> On Wed, Oct 10, 2018 at 3:06 PM Zubair Asghar Raja 
>> wrote:
>>
>>> Hi Terence,
>>> There could be many reasons for that.
>>> Have you tried implementing what Nick suggested? The only limitation is
>>> that the TextPattern option is only available for TEAttribute and not to
>>> DataElement.
>>>
>>>
>>> Zubair Asghar
>>> DHIS-2 Developer
>>> University of Oslo
>>> zub...@dhis2.org 
>>> https://www.dhis2.org
>>>
>>>
>>> On Wed, Oct 10, 2018 at 2:48 PM Terence Scott <
>>> terence.sc...@rabiesalliance.org> wrote:
>>>
>>>> Dear Zubair
>>>>
>>>> Thank you for your rapid response. I have attempted to do this without
>>>> success. I think I am misunderstanding.
>>>>
>>>> 1) I created the program variable "auto-increment' as suggested
>>>> 2) In this step - is this a new program rule? I created a program rule
>>>> as follows: "d2:hasValue #UID", Assign "#auto-increment + 1" to field
>>>> "auto-increment". I then set this as priority 2.
>>>> 3) I created my UID program rule as with the following action:
>>>> "d2:concatenate( V{enrollment_date}, '-', A{Closest Health Center},
>>>> #{auto-increment})" assigned to the attribute for UID. This is set as
>>>> priority 1.
>>>>
>>>> Unfortunately, this does not create t

Re: [Dhis2-users] Help needed: Checking a string with single quote in program rule...

[Terence Scott]

Hi MSP

I am not sure how to rectify the problem directly, but several easy
solutions would be to simply reword the response to: 'Unsure', 'unknown',
'not known' or similar.

Kind regards,
Terence

Terence Scott

Global Alliance for Rabies Control (GARC)
Pan-African Rabies Control Network (PARACON) Steering Committee
terence.sc...@rabiesalliance.org
https://paracon.rabiesalliance.org
Skype: tpscott1987



On Tue, Oct 30, 2018 at 10:26 PM M.Selvaraaj Prabu 
wrote:

> Hi all.
>
> Kindly assist me to resolve this issue.
>
> I want to check a single quoted string in a program rule such as "variable
> == 'Don't know'". I tried using two single quotes (Don''t know) and escaped
> with a backward slash (Don\'t know) but it doesn't work.
>
> Any suggestions? Your help is very much appreciated.
>
> Thanks and regards.
>
> MSP
> ___
> Mailing list: https://launchpad.net/~dhis2-users
> Post to : dhis2-users@lists.launchpad.net
> Unsubscribe : https://launchpad.net/~dhis2-users
> More help   : https://help.launchpad.net/ListHelp
>
___
Mailing list: https://launchpad.net/~dhis2-users
Post to : dhis2-users@lists.launchpad.net
Unsubscribe : https://launchpad.net/~dhis2-users
More help   : https://help.launchpad.net/ListHelp

Re: [Dhis2-users] [Dhis2-devs] Generating sequential numbers in program rule

[Terence Scott]

Dear Zubair, Nick

I have upgraded the instance to 2.30 now and am attempting to once again
implement the sequential numbering using the TextPattern option. I am using
it on a TEAttribute, but have not had any success.

Thus far, my Defined program rule action looks as follows:

d2:concatenate( V{enrollment_date}, '-', V{orgunit_code}, '-')

This is currently working and generating the UID, but of course, without
the sequential numbers. I have attempted the following combinations to try
include the sequential numbers to no avail:
d2:concatenate( V{enrollment_date}, '-', V{orgunit_code}, '-',
SEQUENTIAL(###))
d2:concatenate( V{enrollment_date}, '-', V{orgunit_code}, '-',
Sequential(###))
d2:concatenate( V{enrollment_date}, '-', V{orgunit_code}, '-',
V{Sequential(###)})
d2:concatenate( V{enrollment_date}, '-', V{orgunit_code}, '-',
V{sequential(###)})
d2:concatenate( V{enrollment_date}, '-', V{orgunit_code}, '-',
V{sequential###})
d2:concatenate( V{enrollment_date}, '-', V{orgunit_code}, '-',
'SEQUENTIAL(###)') - this one simply added the text in (as suspected).
d2:concatenate( V{enrollment_date}, '-', V{orgunit_code}, '-') +
SEQUENTIAL(###)

None of these combinations have worked thus far. Clearly I am
misunderstanding something or missing something and would appreciate any
help.

Kind regards,
Terence


Terence Scott

Global Alliance for Rabies Control (GARC)
Pan-African Rabies Control Network (PARACON) Steering Committee
terence.sc...@rabiesalliance.org
https://paracon.rabiesalliance.org
Skype: tpscott1987



On Wed, Oct 10, 2018 at 3:06 PM Zubair Asghar Raja  wrote:

> Hi Terence,
> There could be many reasons for that.
> Have you tried implementing what Nick suggested? The only limitation is
> that the TextPattern option is only available for TEAttribute and not to
> DataElement.
>
>
> Zubair Asghar
> DHIS-2 Developer
> University of Oslo
> zub...@dhis2.org 
> https://www.dhis2.org
>
>
> On Wed, Oct 10, 2018 at 2:48 PM Terence Scott <
> terence.sc...@rabiesalliance.org> wrote:
>
>> Dear Zubair
>>
>> Thank you for your rapid response. I have attempted to do this without
>> success. I think I am misunderstanding.
>>
>> 1) I created the program variable "auto-increment' as suggested
>> 2) In this step - is this a new program rule? I created a program rule as
>> follows: "d2:hasValue #UID", Assign "#auto-increment + 1" to field
>> "auto-increment". I then set this as priority 2.
>> 3) I created my UID program rule as with the following action:
>> "d2:concatenate( V{enrollment_date}, '-', A{Closest Health Center},
>> #{auto-increment})" assigned to the attribute for UID. This is set as
>> priority 1.
>>
>> Unfortunately, this does not create the sequential number, but the
>> concatenated sequence is showing in the UID Attribute.
>>
>> Do I have my priorities incorrect or have I done something else
>> incorrectly?
>>
>> Kind regards,
>> Terence
>>
>> Terence Scott
>>
>> Global Alliance for Rabies Control (GARC)
>> Pan-African Rabies Control Network (PARACON) Steering Committee
>> terence.sc...@rabiesalliance.org
>> https://paracon.rabiesalliance.org
>> Skype: tpscott1987
>>
>>
>>
>> On Wed, Oct 10, 2018 at 2:01 PM Zubair Asghar Raja 
>> wrote:
>>
>>> Hi Terence,
>>> Should be possible using CALCULATED_VALUE.
>>> Program rule variable having source type as CALCULATED_VALUE will get
>>> its value assigned by some other program rule. Try these steps
>>> 1. create program rule variable of source type CALCULATED_VALUE // Let
>>> say "auto-increment"
>>> 2. create program rule with Program Rule Action as Assign Value and
>>> select variable created in step 1 and assign it "#{auto-increment} + 1"
>>> 3. Use it in your program rule where ever needed for example
>>> v{current-date}-#{orgunit}-#{auto-increment}
>>>
>>> In order to use CALCULATED_CALUE make sure you are correctly setting
>>> rule *priority*.
>>>
>>> Zubair Asghar
>>> DHIS-2 Developer
>>> University of Oslo
>>> zub...@dhis2.org 
>>> https://www.dhis2.org
>>>
>>>
>>> On Wed, Oct 10, 2018 at 1:25 PM Terence Scott <
>>> terence.sc...@rabiesalliance.org> wrote:
>>>
>>>> Dear All
>>>>
>>>> I am creating a program rule to develop a UID for the patient. I have
>>>> currently 

Re: [Dhis2-users] Help needed: Assigning current date to a data element...

[Terence Scott]

Glad to hear it!


Terence Scott

Global Alliance for Rabies Control (GARC)
Pan-African Rabies Control Network (PARACON) Steering Committee
terence.sc...@rabiesalliance.org
https://paracon.rabiesalliance.org
Skype: tpscott1987



On Tue, Oct 30, 2018 at 1:03 PM M.Selvaraaj Prabu  wrote:

> Thank you very much Mr.Terence🙏 for pointing to the right direction. It
> worked.😁
>
> Thanks and regards
>
> MSP
>
>
> On Tue, Oct 30, 2018 at 12:39 PM Terence Scott <
> terence.sc...@rabiesalliance.org> wrote:
>
>> Dear MSP
>>
>> I am not sure if you are aware, but see the following documentation for
>> the codes used to create the "current date" in the program rule.
>>
>> https://docs.dhis2.org/2.30/en/user/html/configure_program_rule.html
>>
>> Please see *Table 21.14. Standard variables to use in program rule
>> expressions  *
>>
>> From what I am aware, these variables are applicable to past versions
>> also (therefore should work for 2.29 and 2.28 as I have used them in 2.28).
>>
>> I hope this helps.
>>
>> Kind regards,
>> Terence
>>
>> Terence Scott
>>
>> Global Alliance for Rabies Control (GARC)
>> Pan-African Rabies Control Network (PARACON) Steering Committee
>> terence.sc...@rabiesalliance.org
>> https://paracon.rabiesalliance.org
>> Skype: tpscott1987
>>
>>
>>
>> On Tue, Oct 30, 2018 at 12:11 PM M.Selvaraaj Prabu 
>> wrote:
>>
>>> Hi all,
>>>
>>> I am Selvaraj Muthusamy from PCI, Botswana. We have customised DHIS2
>>> (2.29) to manage our OVC database. We are using Tracker App to capture the
>>> individual case management.
>>>
>>> We have a field (data element) called "Data entered on" and this has to
>>> be the current date and time. I created a data element "Data entered on" as
>>> "Date" type. Now I want to assign the current date and time automatically
>>> to this field when the form is opened. Unfortunately, I am failing to set
>>> this up through a program rule. I could not find a function or system
>>> variable to use for this purpose.
>>>
>>> Any help is highly appreciated.
>>>
>>> Thanks and regards
>>>
>>> MSP
>>> ___
>>> Mailing list: https://launchpad.net/~dhis2-users
>>> Post to : dhis2-users@lists.launchpad.net
>>> Unsubscribe : https://launchpad.net/~dhis2-users
>>> More help   : https://help.launchpad.net/ListHelp
>>>
>>
___
Mailing list: https://launchpad.net/~dhis2-users
Post to : dhis2-users@lists.launchpad.net
Unsubscribe : https://launchpad.net/~dhis2-users
More help   : https://help.launchpad.net/ListHelp

Re: [Dhis2-users] Help needed: Assigning current date to a data element...

[Terence Scott]

Dear MSP

I am not sure if you are aware, but see the following documentation for the
codes used to create the "current date" in the program rule.

https://docs.dhis2.org/2.30/en/user/html/configure_program_rule.html

Please see *Table 21.14. Standard variables to use in program rule
expressions  *

>From what I am aware, these variables are applicable to past versions also
(therefore should work for 2.29 and 2.28 as I have used them in 2.28).

I hope this helps.

Kind regards,
Terence

Terence Scott

Global Alliance for Rabies Control (GARC)
Pan-African Rabies Control Network (PARACON) Steering Committee
terence.sc...@rabiesalliance.org
https://paracon.rabiesalliance.org
Skype: tpscott1987



On Tue, Oct 30, 2018 at 12:11 PM M.Selvaraaj Prabu 
wrote:

> Hi all,
>
> I am Selvaraj Muthusamy from PCI, Botswana. We have customised DHIS2
> (2.29) to manage our OVC database. We are using Tracker App to capture the
> individual case management.
>
> We have a field (data element) called "Data entered on" and this has to be
> the current date and time. I created a data element "Data entered on" as
> "Date" type. Now I want to assign the current date and time automatically
> to this field when the form is opened. Unfortunately, I am failing to set
> this up through a program rule. I could not find a function or system
> variable to use for this purpose.
>
> Any help is highly appreciated.
>
> Thanks and regards
>
> MSP
> ___
> Mailing list: https://launchpad.net/~dhis2-users
> Post to : dhis2-users@lists.launchpad.net
> Unsubscribe : https://launchpad.net/~dhis2-users
> More help   : https://help.launchpad.net/ListHelp
>
___
Mailing list: https://launchpad.net/~dhis2-users
Post to : dhis2-users@lists.launchpad.net
Unsubscribe : https://launchpad.net/~dhis2-users
More help   : https://help.launchpad.net/ListHelp

Re: [Dhis2-users] [Dhis2-devs] Mandatory attributes can not be made optional

[Terence Scott]

Dear Neeraj

I have recently upgraded to 2.30 and I am also experiencing similar. The
attributes that are requested at the beginning of the data entry are all
mandatory (when none of them were mandatory previously). Therefore, the
user cannot progress as mentioned. I will vote on your Jira issue.

Kind regards,
Terence


Terence Scott

Global Alliance for Rabies Control (GARC)
Pan-African Rabies Control Network (PARACON) Steering Committee
terence.sc...@rabiesalliance.org
https://paracon.rabiesalliance.org
Skype: tpscott1987



On Wed, Oct 24, 2018 at 1:53 PM Neeraj Gupta  wrote:

> Yes Calle,
> I have reported this on JIRA DHIS2-5026
> <https://jira.dhis2.org/browse/DHIS2-5026>
>
> On Wed, Oct 24, 2018 at 4:55 PM Calle Hedberg 
> wrote:
>
>> Neeraj,
>>
>> if correct, then it is an obvious BUG. Have you written a JIRA bug report
>> for it?
>>
>> Regards
>> Calle
>>
>> On Wed, 24 Oct 2018 at 09:34, Neeraj Gupta  wrote:
>>
>>> Dear All,
>>>
>>> Once the attribute is made mandatory and if at a later stage it is
>>> considered to be optional then we are able to go to attributes of the
>>> program and uncheck the mandatory field but this is not reflected in the
>>> registration page.
>>> It always treats the attribute as mandatory, the user cannot move
>>> forward without entering data for those attributes.
>>>
>>> Version: 2.30
>>> Build revision: bd6e33e
>>> Build date: 2018-10-23 02:06
>>>
>>> --
>>> Thanks,
>>> Neeraj Gupta
>>> ___
>>> Mailing list: https://launchpad.net/~dhis2-devs
>>> Post to : dhis2-d...@lists.launchpad.net
>>> Unsubscribe : https://launchpad.net/~dhis2-devs
>>> More help   : https://help.launchpad.net/ListHelp
>>>
>>
>>
>> --
>>
>> ***
>>
>> Calle Hedberg
>>
>> 46D Alma Road, 7700 Rosebank, SOUTH AFRICA
>>
>> Tel/fax (home): +27-21-685-6472
>>
>> Cell: +27-82-853-5352
>>
>> Iridium SatPhone: +8816-315-19119
>>
>> Email: calle.hedb...@gmail.com
>>
>> Skype: calle_hedberg
>>
>> ***
>>
>>
>
> --
> Thanks,
> Neeraj Gupta
> ___
> Mailing list: https://launchpad.net/~dhis2-users
> Post to : dhis2-users@lists.launchpad.net
> Unsubscribe : https://launchpad.net/~dhis2-users
> More help   : https://help.launchpad.net/ListHelp
>
___
Mailing list: https://launchpad.net/~dhis2-users
Post to : dhis2-users@lists.launchpad.net
Unsubscribe : https://launchpad.net/~dhis2-users
More help   : https://help.launchpad.net/ListHelp

Re: [Dhis2-users] Unable to create event layer in maps app in 2.30

[Terence Scott]

Hi Nick

We have also just upgraded to 2.30 and are experiencing similar issues. We
had various maps using event data that was working in 2.28, but now when I
look into the event data itself, it seems that the coordinates have all
been lost. The name of the field has changed from "Coordinates" to
"Geometry". I am not sure if this may be part of the issue?

When I tried to update the event data with some coordinates, I select
coordinates, update the event entry and then ran analytics to see if this
would rectify the problem. This did not seem to work. I then entered a new
event entry and subsequently ran analytics again and it seems that it is
still not depicting on the map. When going back to that same event entry, I
see that the coordinates once again are not available and the field is
blanked. Interestingly, all of the graphs attributed to the event data
(e.g. sex distribution etc.) are still working - therefore I suspect that
this has to do with the event coordinates only and not the actual event
data entry.

I have cleared cache and tried to create an entirely new map (using both
GIS and the new Maps app) and none of this has helped either.

Any help would be appreciated, as we have lost all of our maps.

Kind regards,
Terence


Terence Scott

Global Alliance for Rabies Control (GARC)
Pan-African Rabies Control Network (PARACON) Steering Committee
terence.sc...@rabiesalliance.org
https://paracon.rabiesalliance.org
Skype: tpscott1987



On Tue, Oct 16, 2018 at 3:00 PM Shurajit Dutta 
wrote:

> Hi all
>
> I am trying to create an event layer map in 2.30. I know there is data as
> this was working previously in 2.29. I notice in the log when I try to add
> the event layer I receive the following error message:
>
>  ERROR: column ax.geom does not exist
>
> I have installed postgis and ran the upgrade script, but perhaps I am
> missing something else here? Has anyone encountered this before?
>
> Thanks
> Nick
>
> --
> Shurajit Dutta (MPH, MHI)
> Health Information Systems Adviser
> ___
> Mailing list: https://launchpad.net/~dhis2-users
> Post to : dhis2-users@lists.launchpad.net
> Unsubscribe : https://launchpad.net/~dhis2-users
> More help   : https://help.launchpad.net/ListHelp
>
___
Mailing list: https://launchpad.net/~dhis2-users
Post to : dhis2-users@lists.launchpad.net
Unsubscribe : https://launchpad.net/~dhis2-users
More help   : https://help.launchpad.net/ListHelp

Re: [Dhis2-users] Android - Tracker Capture org unit on program rules not working

[Terence Scott]

Once the jira ticket has been created, I would appreciate if you could
share the link so that we could vote on it - I am also interested in
addressing this issue.

Kind regards,
Terence


Terence Scott

Global Alliance for Rabies Control (GARC)
Pan-African Rabies Control Network (PARACON) Steering Committee
terence.sc...@rabiesalliance.org
https://paracon.rabiesalliance.org
Skype: tpscott1987



On Thu, Oct 18, 2018 at 9:23 PM Sarah Searle  wrote:

> We have a similar use case for which we use program rules based on OU
> codes, and as far as I can tell, I can confirm that it does not appear to
> work in the new Android app.
>
> I've been working on a Jira ticket but it's quite an undertaking to
> re-create something similar using the Play demo.
>
> Best,
> Sarah
>
>
> On Thu, Oct 18, 2018 at 2:58 PM Warancha Tumtaweetikul 
> wrote:
>
>> Hi,
>>
>>
>>
>> Does organization unit work on Android Tracker Capture App as a condition
>> for program rules?
>>
>> For example, we have a program rule condition d2:left(V{orgunit_code},3)
>> != '258' so that the data element will show up only for a specific
>> organization unit.
>>
>> This works on web application, but it isn’t working on Android.
>>
>>
>>
>> Thank you.
>>
>>
>>
>> Sincerely,
>>
>> Cha
>>
>>
>> ___
>> Mailing list: https://launchpad.net/~dhis2-users
>> Post to : dhis2-users@lists.launchpad.net
>> Unsubscribe : https://launchpad.net/~dhis2-users
>> More help   : https://help.launchpad.net/ListHelp
>>
>
>
> --
>
>
>
> *Sarah Searle*
> Project Implementation Manager, BAO Systems
> +1 202-536-1541 | ssea...@baosystems.com  |
> http://www.baosystems.comSkype: searle.sarah | 2900 K Street, Suite 507,
> Washington D.C. 20007
>
> ___
> Mailing list: https://launchpad.net/~dhis2-users
> Post to : dhis2-users@lists.launchpad.net
> Unsubscribe : https://launchpad.net/~dhis2-users
> More help   : https://help.launchpad.net/ListHelp
>
___
Mailing list: https://launchpad.net/~dhis2-users
Post to : dhis2-users@lists.launchpad.net
Unsubscribe : https://launchpad.net/~dhis2-users
More help   : https://help.launchpad.net/ListHelp

Re: [Dhis2-users] [Dhis2-devs] SMS/Mobile configuration

[Terence Scott]

Dear Samuel

I am on 2.28 and I just set up the SMS configuration and gateway by
following the steps that you laid out in your descriptive email. I used
Clickatell also and have the + and country code included into the number. I
used my Clickatell username (not the email address). The clickatell
username for me was all lower case (despite initially entering it into
their system as uppercase). I am not sure if that may be an issue, but as
mentioned, I have managed to set up the SMS function from scratch using
what you supplied.

One thing you may check is whether your in your "User settings" in your
profile, you are over-riding the system settings for "Enabling message SMS
notifications".

Kind regards,
Terence

Terence Scott

Global Alliance for Rabies Control (GARC)
Pan-African Rabies Control Network (PARACON) Steering Committee
terence.sc...@rabiesalliance.org
https://paracon.rabiesalliance.org
Skype: tpscott1987



On Tue, Oct 2, 2018 at 4:34 PM Zubair Asghar Raja  wrote:

> Yes. Share the key and i will take a look into it.
>
>
> Zubair Asghar
> DHIS-2 Developer
> University of Oslo
> zub...@dhis2.org 
> https://www.dhis2.org
>
>
> On Tue, Oct 2, 2018 at 4:10 PM Sam Johnson 
> wrote:
>
>> Hi Zubair,
>>
>>
>>
>> Thanks for the quick response.  ☺  Yes, I’ve already tried both with and
>> without the leading ‘+’, and without any country identifier at all.
>> Looking at the format of the Clickatell API call, I assume the ‘+’ should
>> be left off, but my guess is that if the user leaves it on, the DHIS2
>> interface trims it off anyway.
>>
>>
>>
>> I’ve noticed that the Clickatell API defaults to HTTP, whereas I’m
>> guessing DHIS2 uses REST?  (I’ve tried both API configurations anyway,
>> without success.)  If I email you a temporary Clickatell API key, would you
>> have time to quickly test it, to see if the API call that DHIS2 2.30
>> generates still matches the one that Clickatell is expecting?
>>
>>
>>
>> Cheers, Sam.
>>
>>
>>
>>
>>
>> *From: *Zubair Asghar Raja 
>> *Date: *Tuesday, 2 October 2018 at 15:21
>> *To: *Sam Johnson 
>> *Cc: *Shurajit Dutta , "jahidsha...@gmail.com" <
>> jahidsha...@gmail.com>, DHIS 2 Users List <
>> dhis2-users@lists.launchpad.net>, "skaly...@gmail.com" <
>> skaly...@gmail.com>, DHIS2 Developers 
>> *Subject: *Re: [Dhis2-devs] [Dhis2-users] SMS/Mobile configuration
>>
>>
>>
>> Hi Samuel,
>>
>> Have you tried different number formats? For instance with + and without +
>>
>>
>>
>>
>>
>>
>>
>>
>> Zubair Asghar
>>
>> DHIS-2 Developer
>>
>> University of Oslo
>>
>> zub...@dhis2.org 
>>
>> https://www.dhis2.org
>>
>>
>>
>>
>>
>> On Tue, Oct 2, 2018 at 2:31 PM Sam Johnson 
>> wrote:
>>
>> Hi all,
>>
>>
>>
>> I’ve created an account with Clickatell, but despite following the
>> documentation listed below, I’m struggling to configure it in my DHIS2
>> instance (v2.30).
>>
>>
>>
>> In the ‘Mobile Configuration’ module, I’ve selected ‘Add gateway’, and
>> entered the following:
>>
>>- ‘Auth Token’ is my Clickatell API key (ending in ==)
>>- For ‘Login’ I’ve tried both my Clickatell username (samueldjohnson)
>>and my email address (which is what Clickatell actually asks for when I 
>> log
>>into their portal)
>>- In DHIS2, I’ve made sure that ‘Enable message SMS notifications’ is
>>ticked in Settings | Messaging.
>>- I’m doing all testing as superuser (so roles/authorities aren’t an
>>issue).
>>
>>
>>
>> (Note that despite the DHIS2 documentation
>> <https://docs.dhis2.org/2.30/en/user/html/mobile_sms_service.html>
>> saying that only login+password *or* API key need to be set up, I’ve had
>> to enter *both* into the DHIS2 ‘Mobile Configuration’ module, as the
>> screen enforces all three fields as mandatory.)
>>
>>
>>
>> However, whenever I use the ‘Mobile Configuration’ module’s ‘Send SMS’
>> feature to send a test SMS message, it fails.  (In the ‘List of sent SMS’,
>> it shows the correct number, but has [unknown] as recipient, and ‘FAILED’
>> as status.)  I’ve configured the correct countries in Clickatell, and have
>> successfully sent test messages to the same phone with API calls (using
>> curl).  Am I missing something in my DHIS2 configuration?
>>
>>
>>
>> Many thanks for any tips/enlightenment that anyo

Re: [Dhis2-users] [Dhis2-devs] Generating sequential numbers in program rule

[Terence Scott]

Hi Zubair

Unfortunately, I am running 2.28 at the moment and therefore cannot do what
Nick suggested.

I will have to look into upgrading in any case, so I think that may be the
best option for now.

Thank you again for both of your help - I really appreciate it!

Kind regards,
Terence

Terence Scott

Global Alliance for Rabies Control (GARC)
Pan-African Rabies Control Network (PARACON) Steering Committee
terence.sc...@rabiesalliance.org
https://paracon.rabiesalliance.org
Skype: tpscott1987



On Wed, Oct 10, 2018 at 3:06 PM Zubair Asghar Raja  wrote:

> Hi Terence,
> There could be many reasons for that.
> Have you tried implementing what Nick suggested? The only limitation is
> that the TextPattern option is only available for TEAttribute and not to
> DataElement.
>
>
> Zubair Asghar
> DHIS-2 Developer
> University of Oslo
> zub...@dhis2.org 
> https://www.dhis2.org
>
>
> On Wed, Oct 10, 2018 at 2:48 PM Terence Scott <
> terence.sc...@rabiesalliance.org> wrote:
>
>> Dear Zubair
>>
>> Thank you for your rapid response. I have attempted to do this without
>> success. I think I am misunderstanding.
>>
>> 1) I created the program variable "auto-increment' as suggested
>> 2) In this step - is this a new program rule? I created a program rule as
>> follows: "d2:hasValue #UID", Assign "#auto-increment + 1" to field
>> "auto-increment". I then set this as priority 2.
>> 3) I created my UID program rule as with the following action:
>> "d2:concatenate( V{enrollment_date}, '-', A{Closest Health Center},
>> #{auto-increment})" assigned to the attribute for UID. This is set as
>> priority 1.
>>
>> Unfortunately, this does not create the sequential number, but the
>> concatenated sequence is showing in the UID Attribute.
>>
>> Do I have my priorities incorrect or have I done something else
>> incorrectly?
>>
>> Kind regards,
>> Terence
>>
>> Terence Scott
>>
>> Global Alliance for Rabies Control (GARC)
>> Pan-African Rabies Control Network (PARACON) Steering Committee
>> terence.sc...@rabiesalliance.org
>> https://paracon.rabiesalliance.org
>> Skype: tpscott1987
>>
>>
>>
>> On Wed, Oct 10, 2018 at 2:01 PM Zubair Asghar Raja 
>> wrote:
>>
>>> Hi Terence,
>>> Should be possible using CALCULATED_VALUE.
>>> Program rule variable having source type as CALCULATED_VALUE will get
>>> its value assigned by some other program rule. Try these steps
>>> 1. create program rule variable of source type CALCULATED_VALUE // Let
>>> say "auto-increment"
>>> 2. create program rule with Program Rule Action as Assign Value and
>>> select variable created in step 1 and assign it "#{auto-increment} + 1"
>>> 3. Use it in your program rule where ever needed for example
>>> v{current-date}-#{orgunit}-#{auto-increment}
>>>
>>> In order to use CALCULATED_CALUE make sure you are correctly setting
>>> rule *priority*.
>>>
>>> Zubair Asghar
>>> DHIS-2 Developer
>>> University of Oslo
>>> zub...@dhis2.org 
>>> https://www.dhis2.org
>>>
>>>
>>> On Wed, Oct 10, 2018 at 1:25 PM Terence Scott <
>>> terence.sc...@rabiesalliance.org> wrote:
>>>
>>>> Dear All
>>>>
>>>> I am creating a program rule to develop a UID for the patient. I have
>>>> currently created a program rule using d2:concatenate to bring various
>>>> attributes and DEs together into the Unique ID (such as date and OrgUnit
>>>> code). However, I would also like to include sequential numbering after
>>>> this to ensure that more than 1 case can be registered on a single day.
>>>>
>>>> I have looked through all of the documentation and am unable to find
>>>> anything along these lines. Is it possible?
>>>>
>>>> Example:
>>>> 2018-10-10-OrgUnit code-1;
>>>> 2018-10-10-OrgUnit code-2;
>>>> 2018-10-10-OrgUnit code-3; etc.  (where 1,2 and 3 are the sequential
>>>> numbers generated).
>>>>
>>>> I have also looked at Program Rule variables and am unsure as to what
>>>> the "Calculated value" source type is, as in the documentation it is listed
>>>> as "TBA" with no further information.
>>>>
>>>> I would appreciate any help or advise.
>>>>
>>>> Kind regards,
>>>> Terence
>>>>
>>>>
>>>>
>>>>
>>>> Terence Scott
>>>>
>>>> Global Alliance for Rabies Control (GARC)
>>>> Pan-African Rabies Control Network (PARACON) Steering Committee
>>>> terence.sc...@rabiesalliance.org
>>>> https://paracon.rabiesalliance.org
>>>> Skype: tpscott1987
>>>>
>>>> ___
>>>> Mailing list: https://launchpad.net/~dhis2-devs
>>>> Post to : dhis2-d...@lists.launchpad.net
>>>> Unsubscribe : https://launchpad.net/~dhis2-devs
>>>> More help   : https://help.launchpad.net/ListHelp
>>>>
>>>
___
Mailing list: https://launchpad.net/~dhis2-users
Post to : dhis2-users@lists.launchpad.net
Unsubscribe : https://launchpad.net/~dhis2-users
More help   : https://help.launchpad.net/ListHelp

Re: [Dhis2-users] [Dhis2-devs] Generating sequential numbers in program rule

[Terence Scott]

Dear Zubair

Thank you for your rapid response. I have attempted to do this without
success. I think I am misunderstanding.

1) I created the program variable "auto-increment' as suggested
2) In this step - is this a new program rule? I created a program rule as
follows: "d2:hasValue #UID", Assign "#auto-increment + 1" to field
"auto-increment". I then set this as priority 2.
3) I created my UID program rule as with the following action:
"d2:concatenate( V{enrollment_date}, '-', A{Closest Health Center},
#{auto-increment})" assigned to the attribute for UID. This is set as
priority 1.

Unfortunately, this does not create the sequential number, but the
concatenated sequence is showing in the UID Attribute.

Do I have my priorities incorrect or have I done something else incorrectly?

Kind regards,
Terence

Terence Scott

Global Alliance for Rabies Control (GARC)
Pan-African Rabies Control Network (PARACON) Steering Committee
terence.sc...@rabiesalliance.org
https://paracon.rabiesalliance.org
Skype: tpscott1987



On Wed, Oct 10, 2018 at 2:01 PM Zubair Asghar Raja  wrote:

> Hi Terence,
> Should be possible using CALCULATED_VALUE.
> Program rule variable having source type as CALCULATED_VALUE will get its
> value assigned by some other program rule. Try these steps
> 1. create program rule variable of source type CALCULATED_VALUE // Let say
> "auto-increment"
> 2. create program rule with Program Rule Action as Assign Value and select
> variable created in step 1 and assign it "#{auto-increment} + 1"
> 3. Use it in your program rule where ever needed for example
> v{current-date}-#{orgunit}-#{auto-increment}
>
> In order to use CALCULATED_CALUE make sure you are correctly setting rule
> *priority*.
>
> Zubair Asghar
> DHIS-2 Developer
> University of Oslo
> zub...@dhis2.org 
> https://www.dhis2.org
>
>
> On Wed, Oct 10, 2018 at 1:25 PM Terence Scott <
> terence.sc...@rabiesalliance.org> wrote:
>
>> Dear All
>>
>> I am creating a program rule to develop a UID for the patient. I have
>> currently created a program rule using d2:concatenate to bring various
>> attributes and DEs together into the Unique ID (such as date and OrgUnit
>> code). However, I would also like to include sequential numbering after
>> this to ensure that more than 1 case can be registered on a single day.
>>
>> I have looked through all of the documentation and am unable to find
>> anything along these lines. Is it possible?
>>
>> Example:
>> 2018-10-10-OrgUnit code-1;
>> 2018-10-10-OrgUnit code-2;
>> 2018-10-10-OrgUnit code-3; etc.  (where 1,2 and 3 are the sequential
>> numbers generated).
>>
>> I have also looked at Program Rule variables and am unsure as to what the
>> "Calculated value" source type is, as in the documentation it is listed as
>> "TBA" with no further information.
>>
>> I would appreciate any help or advise.
>>
>> Kind regards,
>> Terence
>>
>>
>>
>>
>> Terence Scott
>>
>> Global Alliance for Rabies Control (GARC)
>> Pan-African Rabies Control Network (PARACON) Steering Committee
>> terence.sc...@rabiesalliance.org
>> https://paracon.rabiesalliance.org
>> Skype: tpscott1987
>>
>> ___
>> Mailing list: https://launchpad.net/~dhis2-devs
>> Post to : dhis2-d...@lists.launchpad.net
>> Unsubscribe : https://launchpad.net/~dhis2-devs
>> More help   : https://help.launchpad.net/ListHelp
>>
>
___
Mailing list: https://launchpad.net/~dhis2-users
Post to : dhis2-users@lists.launchpad.net
Unsubscribe : https://launchpad.net/~dhis2-users
More help   : https://help.launchpad.net/ListHelp

[Dhis2-users] Generating sequential numbers in program rule

[Terence Scott]

Dear All

I am creating a program rule to develop a UID for the patient. I have
currently created a program rule using d2:concatenate to bring various
attributes and DEs together into the Unique ID (such as date and OrgUnit
code). However, I would also like to include sequential numbering after
this to ensure that more than 1 case can be registered on a single day.

I have looked through all of the documentation and am unable to find
anything along these lines. Is it possible?

Example:
2018-10-10-OrgUnit code-1;
2018-10-10-OrgUnit code-2;
2018-10-10-OrgUnit code-3; etc.  (where 1,2 and 3 are the sequential
numbers generated).

I have also looked at Program Rule variables and am unsure as to what the
"Calculated value" source type is, as in the documentation it is listed as
"TBA" with no further information.

I would appreciate any help or advise.

Kind regards,
Terence




Terence Scott

Global Alliance for Rabies Control (GARC)
Pan-African Rabies Control Network (PARACON) Steering Committee
terence.sc...@rabiesalliance.org
https://paracon.rabiesalliance.org
Skype: tpscott1987
___
Mailing list: https://launchpad.net/~dhis2-users
Post to : dhis2-users@lists.launchpad.net
Unsubscribe : https://launchpad.net/~dhis2-users
More help   : https://help.launchpad.net/ListHelp

[Dhis2-users] Specifications within a Data Element (Tracker)

[Terence Scott]

Dear All

I am interested in placing criteria/specifications within a specific data
element. For instance, I have created a DE for a unique ID number to be
entered. However, there are specific codes that I would like to have
entered into this DE (text type DE). For example, the UID should be 1
letter (either 'A', 'D' or 'E') followed by 4 numbers. The user would input
the letter depending on the outcome of the patient and then the numbers.

e.g. I am looking for a code as follows: A0001

Is it possible to put into place a programme rule or any other option (this
is for Tracker) that restricts user input to one of the 3 letters followed
by 4 numbers? Is this at all possible?

I considered creating a DE with Cat options that has the 3 letter code
options available for selection and then a separate DE for the 4 numbers,
but hoped there was a better and more elegant solution.

Thanking you in advance for your help.

Kind regards,
Terence

Terence Scott

Global Alliance for Rabies Control (GARC)
Pan-African Rabies Control Network (PARACON) Steering Committee
terence.sc...@rabiesalliance.org
https://paracon.rabiesalliance.org
Skype: tpscott1987



Register your World Rabies Day event here
<https://rabiesalliance.org/world-rabies-day/register>
Nominate an individual or organisation in the World Rabies Day Awards here
<https://rabiesalliance.org/world-rabies-day/awards>
Find our event and awareness resources here
<https://rabiesalliance.org/world-rabies-day/event-resources>
*World Rabies Day, Sept 28, is a global day of action and awareness for
rabies prevention*
___
Mailing list: https://launchpad.net/~dhis2-users
Post to : dhis2-users@lists.launchpad.net
Unsubscribe : https://launchpad.net/~dhis2-users
More help   : https://help.launchpad.net/ListHelp

Re: [Dhis2-users] [Dhis2-devs] dhis version 2.29 is released

[Terence Scott]

Thanks to the DHIS2 team for some fantastic new features and a great new
look too!

Terence Scott

Global Alliance for Rabies Control (GARC)
Pan-African Rabies Control Network (PARACON) Steering Committee
terence.sc...@rabiesalliance.org
https://paracon.rabiesalliance.org
Skype: tpscott1987





On Thu, Mar 8, 2018 at 6:41 AM, Ocaya Stephen  wrote:

> Great work DHIS2 dev team. I see interesting features.
>
> Regards
>
> On Mar 8, 2018 5:30 AM, "channara rin"  wrote:
>
>> Many helpful features,
>>
>> thank you all teams...
>>
>> best regards,
>> channara
>>
>> On Thu, Mar 8, 2018 at 7:55 AM, Pamod Amarakoon  wrote:
>>
>>> Thank you and great job !
>>>
>>> On Thu, Mar 8, 2018, 3:53 AM DJIBRIL Hakim  wrote:
>>>
>>>> Congratulations Guys!
>>>>
>>>> 2018-03-07 21:55 GMT+00:00 John Mukulu :
>>>>
>>>>> Great Job
>>>>>
>>>>> Congratulations for major milestones on this release.
>>>>>
>>>>> John Francis Mukulu
>>>>> Software Architect, HISPTZ
>>>>> http://hisptanzania.org/
>>>>>
>>>>> On Mar 8, 2018 00:40, "Lars Helge Øverland"  wrote:
>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> *Hi all,DHIS version 2.29 is out with many new features, apps and
>>>>>> improvements.Login with admin/district on the demo
>>>>>> <http://play.dhis2.org/2.29/> system to try it out.ANALYTICS
>>>>>> FEATURES---Dashboard app: A new dashboard app is now available which lets
>>>>>> you arrange the dashboard items in a completely flexible way. It features
>>>>>> better dashboard search, allows you to create shortcuts by marking
>>>>>> dashboards as favorites, switch between visualization types such as 
>>>>>> pivot,
>>>>>> chart and map and insert free-text items. Dashboards can be shared,
>>>>>> translated and filtered.Screenshot 1
>>>>>> <https://s3-eu-west-1.amazonaws.com/content.dhis2.org/releases/screenshots/29/dashboard-view.png>
>>>>>> | 2
>>>>>> <https://s3-eu-west-1.amazonaws.com/content.dhis2.org/releases/screenshots/29/dashboard-edit-mode.png>
>>>>>> | Demo <https://play.dhis2.org/2.29/dhis-web-dashboard/index.html> | Docs
>>>>>> <https://docs.dhis2.org/2.29/en/user/html/dashboard.html>Maps app: A new
>>>>

[Dhis2-users] Unidirectional relationships - tracker

[Terence Scott]

Dear All

I was wondering whether anyone could assist me.

I am looking to create a unidirectional relationship in tracker capture.
For our example, I am looking to have a suspect animal linked to a specific
patient that is being treated. Therefore, the health professional treating
the patient can determine the necessary treatment based on the outcome of
the investigation into the animal. However, we do not want the people
working in the veterinary sector (those dealing with the animal) to be able
to see the confidential human patient information.

Is there a way to link two programmes without having a relationship? Or
alternatively, is there a way to have a unidirectional relationship?

I understand that automated notifications could be a simple remedy to this,
but this would remove the appealing 'automation' of the system, as one
would need a data capturer in both the clinic and at the vet offices to
capture and record the information from the notifications and match that to
the relevant case.

Any assistance or advice would be appreciated.

Kind regards,
Terence


Terence Scott

Global Alliance for Rabies Control (GARC)
Pan-African Rabies Control Network (PARACON) Steering Committee
terence.sc...@rabiesalliance.org
https://paracon.rabiesalliance.org
Skype: tpscott1987
___
Mailing list: https://launchpad.net/~dhis2-users
Post to : dhis2-users@lists.launchpad.net
Unsubscribe : https://launchpad.net/~dhis2-users
More help   : https://help.launchpad.net/ListHelp

Re: [Dhis2-users] HELP NEEDED: Interpretations module

[Terence Scott]

Hi Georgi

We are experiencing the same issues, as we are also working between
multiple countries with data that should not be shared between different
countries. As you mentioned, all of the other permissions restrict other
countries from seeing country-specific data, but the interpretations (and
that associated charts/tables etc.) are shared publicly.

Have you managed to find a means to prevent this?

I did a quick search on JIRA and could not find anything relevant. Have you
opened an issue there that I could possibly vote on?

Kind regards,
Terence

Terence Scott

Global Alliance for Rabies Control (GARC)
Pan-African Rabies Control Network (PARACON) Steering Committee
terence.sc...@rabiesalliance.org
https://paracon.rabiesalliance.org
Skype: tpscott1987





On Wed, Jan 24, 2018 at 10:12 PM, Georgi Chakarov <
geo...@logicaloutcomes.net> wrote:

> Hi all,
>
>
>
> We are using DHIS2 2.28 and have a small trouble with Interpretations. We
> have several parties using DHIS2. All of them have individual reports
> (pivot tables and charts) that cannot be seen by the other parties (managed
> through reports sharing options).
>
> The report sharing work and we get only users that need to see certain
> reports to actually see them. However this is not the case with
> interpretations. When a user writes an interpretation on a report they are
> allowed to see, *all other users see that interpretation.*
>
> I would expect that user would be able to see interpretations only for the
> reports that have been shared with them, but this is not the case. All
> users can see all interpretations. Do you have an idea how to fix this? If
> not, is there a way to disable interpretations module?
>
>
>
> Looking forward to your comments!
>
>
>
> Regards,
>
> Georgi
>
>
>
>
> Georgi Chakarov, CIA | geo...@logicaloutcomes.net | +1-647-478-5634 x 104
> <(647)%20478-5634> | LogicalOutcomes c/o Centre for Social Innovation,
> 720 Bathurst Street, Toronto Canada M5S 2R4 | *You may unsubscribe from
> receiving commercial electronic messages from LogicalOutcomes by emailing *
> *i...@logicaloutcomes.net* 
>
>
>
> ___
> Mailing list: https://launchpad.net/~dhis2-users
> Post to : dhis2-users@lists.launchpad.net
> Unsubscribe : https://launchpad.net/~dhis2-users
> More help   : https://help.launchpad.net/ListHelp
>
>
___
Mailing list: https://launchpad.net/~dhis2-users
Post to : dhis2-users@lists.launchpad.net
Unsubscribe : https://launchpad.net/~dhis2-users
More help   : https://help.launchpad.net/ListHelp

Re: [Dhis2-users] [Dhis2-devs] Import of a new event (not from another instance)

[Terence Scott]

Hi Calle

Thank you for the advice. The way in which we plan on using it would be for
regular import in the system from the devices that we have made. Therefore,
small datasets (a few hundred records at most) would be imported on a daily
or weekly basis.

Kind regards,
Terence

Terence Scott

Global Alliance for Rabies Control (GARC)
Pan-African Rabies Control Network (PARACON) Steering Committee
terence.sc...@rabiesalliance.org
https://paracon.rabiesalliance.org
Skype: tpscott1987




On Thu, Oct 12, 2017 at 3:27 PM, Calle Hedberg 
wrote:

> Terence,
>
> It definitely works to generate event UIDs using one of the methods above
> - just be aware that the import is very slow for larger record sets.
>
> I just imported around 2.4 mill events from 2001-2012 (with around 12
> values each), and ended up having to import year by year - it still took 3
> full days to import (i.e. around 40 hours). So the smart thing would be to
> (a) ensure you have a lot of ram allocated to the instance (~16GB is
> probably optimal), but also to limit the import file to not more than 2
> mill rows.
>
> Regards
> Calle
>
> On 12 October 2017 at 10:47, Terence Scott  org> wrote:
>
>> Hi Morten
>>
>> Thank you for the help! I will try these and see whether I can get it to
>> work!
>>
>> Kind regards,
>> Terence
>>
>> Terence Scott
>>
>> Global Alliance for Rabies Control (GARC)
>> Pan-African Rabies Control Network (PARACON) Steering Committee
>> terence.sc...@rabiesalliance.org
>> https://paracon.rabiesalliance.org
>> Skype: tpscott1987
>>
>>
>>
>>
>> On Wed, Oct 11, 2017 at 1:32 PM, Morten Olav Hansen 
>> wrote:
>>
>>> Hi there
>>>
>>> Sending in event IDs is not required, but its definitely recommended if
>>> you want do repeated imports (good to have a unique id connected to your
>>> event so that you don't end up with duplicates)
>>>
>>> We offer a few options to generate UIDs:
>>>
>>> 1) Using the web-api /api/system/id (you can add limit=X to adjust how
>>> many you need)
>>> 2) Install the dhis2 cli (npm -g install dhis2-cli) and then just do
>>> "dhis2 uid", or "dhis2 uid -h" to get more help
>>> 3) if you are nodejs directly you can also use the dhis2-uid lib for
>>> generating uids (npm --save install dhis2-uid)
>>>
>>> https://www.npmjs.com/package/dhis2-cli
>>> https://www.npmjs.com/package/dhis2-uid
>>>
>>> --
>>> Morten Olav Hansen
>>> Senior Engineer, DHIS 2
>>> University of Oslo
>>> http://www.dhis2.org
>>>
>>> On Wed, Oct 11, 2017 at 1:21 PM, Terence Scott <
>>> terence.sc...@rabiesalliance.org> wrote:
>>>
>>>> Dear All
>>>>
>>>> We have collected animal vaccination data (including GPS coordinates,
>>>> time, date, species etc.) in a custom developed program and have a CSV
>>>> output for this program. We are looking to try to import the data from the
>>>> custom-built programme into our DHIS2 instance via Event import. I have
>>>> gotten the import to work on Event export files that I have edited with new
>>>> animal data (e.g. by changing the species) and this works, as it simply
>>>> updates the old event (based on the event ID). However, we would like to
>>>> import these data as new events as opposed to simply replacing existing
>>>> events currently on the system.
>>>>
>>>> Therefore, I would like to please find out as to whether it is possible
>>>> to do one of the following:
>>>>
>>>> 1) Do an event import without an Event ID (i.e. register a new event on
>>>> the DHIS2 instance via Event import)
>>>> - I have looked through the documentation but am unable to find out
>>>> whetherthis is possible
>>>> - In the Developer Docs, it seems to mention that import using XML
>>>> does notrequire an Event ID, but I have not managed to
>>>> determine whether I am  misinterpreting this or whether I
>>>> simply do not know how to do it.
>>>>
>>>> 2) Generate our own Event IDs in our custom-built programme that will
>>>> be recognised by the DHIS2 instance.
>>>> - Is there some way by which the Event IDs could be automatically
>>>> generated  outside of the DHIS2 instance (in our programme) so that
>>>> new events can be  imported into the instance?
>&g

Re: [Dhis2-users] Import of a new event (not from another instance)

[Terence Scott]

Hi Morten

Thank you for the help! I will try these and see whether I can get it to
work!

Kind regards,
Terence

Terence Scott

Global Alliance for Rabies Control (GARC)
Pan-African Rabies Control Network (PARACON) Steering Committee
terence.sc...@rabiesalliance.org
https://paracon.rabiesalliance.org
Skype: tpscott1987




On Wed, Oct 11, 2017 at 1:32 PM, Morten Olav Hansen 
wrote:

> Hi there
>
> Sending in event IDs is not required, but its definitely recommended if
> you want do repeated imports (good to have a unique id connected to your
> event so that you don't end up with duplicates)
>
> We offer a few options to generate UIDs:
>
> 1) Using the web-api /api/system/id (you can add limit=X to adjust how
> many you need)
> 2) Install the dhis2 cli (npm -g install dhis2-cli) and then just do
> "dhis2 uid", or "dhis2 uid -h" to get more help
> 3) if you are nodejs directly you can also use the dhis2-uid lib for
> generating uids (npm --save install dhis2-uid)
>
> https://www.npmjs.com/package/dhis2-cli
> https://www.npmjs.com/package/dhis2-uid
>
> --
> Morten Olav Hansen
> Senior Engineer, DHIS 2
> University of Oslo
> http://www.dhis2.org
>
> On Wed, Oct 11, 2017 at 1:21 PM, Terence Scott <
> terence.sc...@rabiesalliance.org> wrote:
>
>> Dear All
>>
>> We have collected animal vaccination data (including GPS coordinates,
>> time, date, species etc.) in a custom developed program and have a CSV
>> output for this program. We are looking to try to import the data from the
>> custom-built programme into our DHIS2 instance via Event import. I have
>> gotten the import to work on Event export files that I have edited with new
>> animal data (e.g. by changing the species) and this works, as it simply
>> updates the old event (based on the event ID). However, we would like to
>> import these data as new events as opposed to simply replacing existing
>> events currently on the system.
>>
>> Therefore, I would like to please find out as to whether it is possible
>> to do one of the following:
>>
>> 1) Do an event import without an Event ID (i.e. register a new event on
>> the DHIS2 instance via Event import)
>> - I have looked through the documentation but am unable to find out
>> whetherthis is possible
>> - In the Developer Docs, it seems to mention that import using XML
>> does notrequire an Event ID, but I have not managed to
>> determine whether I am  misinterpreting this or whether I
>> simply do not know how to do it.
>>
>> 2) Generate our own Event IDs in our custom-built programme that will be
>> recognised by the DHIS2 instance.
>> - Is there some way by which the Event IDs could be automatically
>> generated  outside of the DHIS2 instance (in our programme) so that
>> new events can be  imported into the instance?
>>
>> Please let me know if you need any further clarification. I would really
>> appreciate any help that you could provide!
>>
>> Kind regards,
>> Terence
>>
>>
>> Terence Scott
>>
>> Global Alliance for Rabies Control (GARC)
>> Pan-African Rabies Control Network (PARACON) Steering Committee
>> terence.sc...@rabiesalliance.org
>> https://paracon.rabiesalliance.org
>> Skype: tpscott1987
>>
>>
>>
>>
>> ___
>> Mailing list: https://launchpad.net/~dhis2-users
>> Post to : dhis2-users@lists.launchpad.net
>> Unsubscribe : https://launchpad.net/~dhis2-users
>> More help   : https://help.launchpad.net/ListHelp
>>
>>
>
___
Mailing list: https://launchpad.net/~dhis2-users
Post to : dhis2-users@lists.launchpad.net
Unsubscribe : https://launchpad.net/~dhis2-users
More help   : https://help.launchpad.net/ListHelp

[Dhis2-users] Import of a new event (not from another instance)

[Terence Scott]

Dear All

We have collected animal vaccination data (including GPS coordinates, time,
date, species etc.) in a custom developed program and have a CSV output for
this program. We are looking to try to import the data from the
custom-built programme into our DHIS2 instance via Event import. I have
gotten the import to work on Event export files that I have edited with new
animal data (e.g. by changing the species) and this works, as it simply
updates the old event (based on the event ID). However, we would like to
import these data as new events as opposed to simply replacing existing
events currently on the system.

Therefore, I would like to please find out as to whether it is possible to
do one of the following:

1) Do an event import without an Event ID (i.e. register a new event on the
DHIS2 instance via Event import)
- I have looked through the documentation but am unable to find out
whetherthis is possible
- In the Developer Docs, it seems to mention that import using XML does
notrequire an Event ID, but I have not managed to determine
whether I am  misinterpreting this or whether I simply do
not know how to do it.

2) Generate our own Event IDs in our custom-built programme that will be
recognised by the DHIS2 instance.
- Is there some way by which the Event IDs could be automatically
generated  outside of the DHIS2 instance (in our programme) so that
new events can be  imported into the instance?

Please let me know if you need any further clarification. I would really
appreciate any help that you could provide!

Kind regards,
Terence


Terence Scott

Global Alliance for Rabies Control (GARC)
Pan-African Rabies Control Network (PARACON) Steering Committee
terence.sc...@rabiesalliance.org
https://paracon.rabiesalliance.org
Skype: tpscott1987
___
Mailing list: https://launchpad.net/~dhis2-users
Post to : dhis2-users@lists.launchpad.net
Unsubscribe : https://launchpad.net/~dhis2-users
More help   : https://help.launchpad.net/ListHelp

Re: [Dhis2-users] [App] Web portal App [WISCENTDs]

[Terence Scott]

Hi Lise

We have been using the embed function on the webpage and it has been
working great for us. You can see the interactive map that we have made at
the following link: https://rabiesalliance.org/networks/paracon/bulletin

It is really easy to use and is not cumbersome - it only takes a few
seconds per visual once the webpage had been set up on our side.

We have not tried the web portal, but through the embed process, the
visuals all remain interactive and update automatically when new data is
added.

Kind regards,
Terence

Terence Scott

Global Alliance for Rabies Control (GARC)
Pan-African Rabies Control Network (PARACON) Steering Committee
terence.sc...@rabiesalliance.org
https://paracon.rabiesalliance.org
Skype: tpscott1987

*World Rabies Day *is on* September 28th 2017*



Take action: you can register your World Rabies Day event, access logos in
your language, download useful resources and find out more here
<https://rabiesalliance.org/world-rabies-day/>
Don't forget to tweet us using #worldrabiesday



On Thu, Sep 28, 2017 at 2:44 PM, GROUT, Lise  wrote:

> Dear DHIS2 users,
>
>
>
> We would like to publish some of our dashboard publicly on our webpage. We
> installed the “Web portal” App few months ago, but when we click, the
> window remains blank and we can’t find any documentation on it.
>
>
>
> Is anyone using this “Web portal” App successfully and could share some
> documentation/Experience with us?
>
>
>
> If this App is outdated, is there an easy way to publish a dashboard on
> the web, or should we embed each table/chart/map in the webpage?
>
>
>
> Best
>
> Lise
>
>
>
>
>
>
>
> Dr. Lise Grout
>
> *Epidemiologist*
>
>
>
> *World Health Organization*
>
> *Department of Neglected Tropical Diseases (HTM/NTD/IDM)*
> *Innovative and Intensified Disease Management Unit*
> *20, Avenue Appia; CH-1211 Geneva 27*
> *Tel. **+41 22 791 2341 <+41%2022%20791%2023%2041>*
>
> *Mobile +41 79 290 68 61 <+41%2079%20290%2068%2061>*
>
> *Skype: tigrouveto*
>
> http://www.who.int/neglected_diseases
>
>
>
> ___
> Mailing list: https://launchpad.net/~dhis2-users
> Post to : dhis2-users@lists.launchpad.net
> Unsubscribe : https://launchpad.net/~dhis2-users
> More help   : https://help.launchpad.net/ListHelp
>
>
___
Mailing list: https://launchpad.net/~dhis2-users
Post to : dhis2-users@lists.launchpad.net
Unsubscribe : https://launchpad.net/~dhis2-users
More help   : https://help.launchpad.net/ListHelp

Re: [Dhis2-users] User permissions - view visuals specific Org unit and not children

[Terence Scott]

Dear Prosper

Thank you very much for the response. Unfortunately, we cannot create the
user roles to view Dashboards alone as the users will still need to be able
to make their own visuals for their country.

Our solution to this issue will therefore be to have an external webpage
where the selected visuals from each of the dashboards are then embedded
into the page for public view, and the dashboards within the DHIS2 instance
remain confidential to each country with user roles per Org Unit only.

Thank you for your help!

Kind regards,
Terence

Terence Scott

Global Alliance for Rabies Control (GARC)
Pan-African Rabies Control Network (PARACON) Steering Committee
terence.sc...@rabiesalliance.org
https://paracon.rabiesalliance.org
Skype: tpscott1987

*World Rabies Day *is on* September 28th 2017*



Take action: you can register your World Rabies Day event, nominate someone
for the WRD Awards and find out more here
<https://rabiesalliance.org/world-rabies-day/>
Don't forget to tweet us using #worldrabiesday


On Thu, Sep 7, 2017 at 6:26 PM, Prosper BT  wrote:

> Dear Scott,
>
> The only workaround is if the users have access to dashboards only and not
> access to analytics tools where the objects are created so as not to be
> able to drill down.
>
> Otherwise once you grant access to the parent orgunit then they will have
> access to children orgunits and this is the power of DHIS2 that you can
> drill down especially when conducting data error and issues checks.
>
> Regards
>
> Prosper Behumbiize, MPH
> DHIS2 Implementation| HISP Uganda
> pros...@hispuganda.org  | pros...@dhis2.org | Skype:
> prospertb
>
> On Thu, Sep 7, 2017 at 6:44 PM, Terence Scott <
> terence.sc...@rabiesalliance.org> wrote:
>
>> Dear All
>>
>> We have created a dashboard for every country that we are working in.
>> Some of these countries have granted us permission to share their data
>> publicly, but only the aggregated data collected at the national level
>> (i.e. not the children such as provinces/districts as this must remain
>> confidential for the country).
>>
>> We have created users by Org unit and assigned the relevant users to
>> their own org unit. In addition, on the dashboards, we have enabled "Public
>> access" option with a view only status so that all users can see that
>> dashboard. However, the data on the dashboard of other countries is not
>> viewable as permission has not been granted in their user status.
>>
>> The problem comes in when you grant permission under User - if you enable
>> access to the other countries under the "Data output and analysis
>> organisation units" section, then all of the children of those Org units
>> are selected with no option to only select a certain Org Unit level.
>>
>> Is there some sort of way around this so that other countries can only
>> see the visuals on each other's dashboards? (All of the visuals on the
>> country dashboards are aggregated national level data).
>>
>> I hope that this makes sense.
>>
>> Your help would be appreciated.
>>
>> Kind regards,
>> Terence
>>
>>
>> Terence Scott
>>
>> Global Alliance for Rabies Control (GARC)
>> Pan-African Rabies Control Network (PARACON) Steering Committee
>> terence.sc...@rabiesalliance.org
>> https://paracon.rabiesalliance.org
>> Skype: tpscott1987
>>
>> *World Rabies Day *is on* September 28th 2017*
>>
>>
>>
>> Take action: you can register your World Rabies Day event, nominate
>> someone for the WRD Awards and find out more here
>> <https://rabiesalliance.org/world-rabies-day/>
>> Don't forget to tweet us using #worldrabiesday
>>
>>
>> ___
>> Mailing list: https://launchpad.net/~dhis2-users
>> Post to : dhis2-users@lists.launchpad.net
>> Unsubscribe : https://launchpad.net/~dhis2-users
>> More help   : https://help.launchpad.net/ListHelp
>>
>>
>
___
Mailing list: https://launchpad.net/~dhis2-users
Post to : dhis2-users@lists.launchpad.net
Unsubscribe : https://launchpad.net/~dhis2-users
More help   : https://help.launchpad.net/ListHelp

[Dhis2-users] User permissions - view visuals specific Org unit and not children

[Terence Scott]

Dear All

We have created a dashboard for every country that we are working in. Some
of these countries have granted us permission to share their data publicly,
but only the aggregated data collected at the national level (i.e. not the
children such as provinces/districts as this must remain confidential for
the country).

We have created users by Org unit and assigned the relevant users to their
own org unit. In addition, on the dashboards, we have enabled "Public
access" option with a view only status so that all users can see that
dashboard. However, the data on the dashboard of other countries is not
viewable as permission has not been granted in their user status.

The problem comes in when you grant permission under User - if you enable
access to the other countries under the "Data output and analysis
organisation units" section, then all of the children of those Org units
are selected with no option to only select a certain Org Unit level.

Is there some sort of way around this so that other countries can only see
the visuals on each other's dashboards? (All of the visuals on the country
dashboards are aggregated national level data).

I hope that this makes sense.

Your help would be appreciated.

Kind regards,
Terence


Terence Scott

Global Alliance for Rabies Control (GARC)
Pan-African Rabies Control Network (PARACON) Steering Committee
terence.sc...@rabiesalliance.org
https://paracon.rabiesalliance.org
Skype: tpscott1987

*World Rabies Day *is on* September 28th 2017*



Take action: you can register your World Rabies Day event, nominate someone
for the WRD Awards and find out more here
<https://rabiesalliance.org/world-rabies-day/>
Don't forget to tweet us using #worldrabiesday
___
Mailing list: https://launchpad.net/~dhis2-users
Post to : dhis2-users@lists.launchpad.net
Unsubscribe : https://launchpad.net/~dhis2-users
More help   : https://help.launchpad.net/ListHelp

Re: [Dhis2-users] Options not showing in tracker data entry (version 2.26; build revision 7db3ef8)

[Terence Scott]

Dear All

I have had a similar problem in the past and have simply cleared cache,
worked in 'incognito mode' and run analytics. This has solved the problem
as all has been correct with the build side, but it did not reflect.

I hope this helps.

Kind regards,
Terence

Terence Scott

Global Alliance for Rabies Control (GARC)
Pan-African Rabies Control Network (PARACON) Steering Committee
terence.sc...@rabiesalliance.org
https://paracon.rabiesalliance.org
Skype: tpscott1987

*World Rabies Day *is on* September 28th 2017*



Take action: you can register your World Rabies Day event, nominate someone
for the WRD Awards and find out more here
<https://rabiesalliance.org/world-rabies-day/>
Don't forget to tweet us using #worldrabiesday


On Mon, Aug 28, 2017 at 12:15 PM, Georgi Chakarov <
geo...@logicaloutcomes.net> wrote:

> Update to the latest build to 2.26 or 2.27. This is how it worked for me.
>
>
>
> *From:* Dhis2-users [mailto:dhis2-users-bounces+georgi=
> logicaloutcomes@lists.launchpad.net] *On Behalf Of *Stanley Kalyati
> *Sent:* Monday, August 28, 2017 1:12 PM
> *To:* Nayeem Al Mifthah 
> *Cc:* DHIS Users ; DHIS 2 Developers
> list 
> *Subject:* Re: [Dhis2-users] Options not showing in tracker data entry
> (version 2.26; build revision 7db3ef8)
>
>
>
> Has anybody really responded to this? I am also facing the same challenge.
>
>
>
> Regards
>
>
>
> On Wed, Aug 2, 2017 at 3:07 PM, Nayeem Al Mifthah 
> wrote:
>
> Dear Mithilesh
>
> It is working fine on my instance with 2.26. I have faced same after first
> upgradation. But after re upgrading with clearing server cache and browser
> cache, the problem has solved.
>
>
>
> On 2 Aug 2017 6:10 pm, "Mithilesh Kumar Thakur" 
> wrote:
>
> Hi all,
>
> I am also facing this issue in 2-3 instances after updating to latest 2.26
> war file.
>
> @ Georgi, Do you also have any program rules defined as we think this is
> related to program rules?
>
>
>
> On Tue, Aug 1, 2017 at 10:08 PM, Absolom MURAMIRA 
> wrote:
>
> This happened to my instance a few weeks ago after updating the war file
> and when i restored to old one it worked well. May be it could be a problem
> with the latest 2.26 war file.
>
>
>
> On Tuesday, August 1, 2017 6:31 PM, Georgi Chakarov <
> geo...@logicaloutcomes.net> wrote:
>
>
>
> Hello,
>
>
>
> I have this funny issue, where I cannot see the options in tracker data
> entry. I have created an option set and the related options. All options
> are unit and have codes (see screenshot 1).
>
> The option set has been assigned to the data element. When I go to tracker
> capture, the dropdown is empty and I cannot see any of the options (see
> screenshot 2). Any idea?
>
>
>
> Screenshot 1 – Option set
>
>
>
>
>
>
>
> Screenshot 2 – Tracker data entry, options now displaying
>
>
>
>
>
>
> Georgi Chakarov, CIA | geo...@logicaloutcomes.net | +1-647-478-5634 x 104
> <+1%20647-478-5634> | LogicalOutcomes c/o Centre for Social Innovation,
> 720 Bathurst Street, Toronto Canada M5S 2R4 | *You may unsubscribe from
> receiving commercial electronic messages from LogicalOutcomes by emailing 
> **i...@logicaloutcomes.net
> *
>
>
>
> ___
> Mailing list: https://launchpad.net/~dhis2-users
> Post to: dhis2-users@lists.launchpad.net
> Unsubscribe : https://launchpad.net/~dhis2-users
> More help  : https://help.launchpad.net/ListHelp
>
>
> ___
> Mailing list: https://launchpad.net/~dhis2-users
> Post to : dhis2-users@lists.launchpad.net
> Unsubscribe : https://launchpad.net/~dhis2-users
> More help   : https://help.launchpad.net/ListHelp
>
>
>
>
> --
>
>
> Thanks and Regards
>
> Mithilesh Kumar Thakur
>
>
> ___
> Mailing list: https://launchpad.net/~dhis2-users
> Post to : dhis2-users@lists.launchpad.net
> Unsubscribe : https://launchpad.net/~dhis2-users
> More help   : https://help.launchpad.net/ListHelp
>
>
> ___
> Mailing list: https://launchpad.net/~dhis2-users
> Post to : dhis2-users@lists.launchpad.net
> Unsubscribe : https://launchpad.net/~dhis2-users
> More help   : https://help.launchpad.net/ListHelp
>
>
>
> ___
> Mailing list: https://launchpad.net/~dhis2-users
> Post to : dhis2-users@lists.launchpad.net
> Unsubscribe : https://launchpad.net/~dhis2-users
> More help   : https://help.launchpad.net/ListHelp
>
>
___
Mailing list: https://launchpad.net/~dhis2-users
Post to : dhis2-users@lists.launchpad.net
Unsubscribe : https://launchpad.net/~dhis2-users
More help   : https://help.launchpad.net/ListHelp

Re: [Dhis2-users] Programme indicator - Days between

[Terence Scott]

Dear All

To share how I resolved the issue:

I had created an attribute that was "date of incident" instead of using the
default tickbox when creating the programme. Therefore, once I used the
programme default of "date of incident" the calculation worked correctly.

Kind regards,
Terence

Terence Scott

Global Alliance for Rabies Control (GARC)
Pan-African Rabies Control Network (PARACON) Steering Committee
terence.sc...@rabiesalliance.org
https://paracon.rabiesalliance.org
Skype: tpscott1987

*World Rabies Day *is on* September 28th 2017*



Take action: you can register your World Rabies Day event, nominate someone
for the WRD Awards and find out more here
<https://rabiesalliance.org/world-rabies-day/>
Don't forget to tweet us using #worldrabiesday


On Fri, Aug 25, 2017 at 4:54 PM, Terence Scott <
terence.sc...@rabiesalliance.org> wrote:

> Nevermind, I managed to figure it out!
>
> Terence Scott
>
> Global Alliance for Rabies Control (GARC)
> Pan-African Rabies Control Network (PARACON) Steering Committee
> terence.sc...@rabiesalliance.org
> https://paracon.rabiesalliance.org
> Skype: tpscott1987
>
> *World Rabies Day *is on* September 28th 2017*
>
>
>
> Take action: you can register your World Rabies Day event, nominate
> someone for the WRD Awards and find out more here
> <https://rabiesalliance.org/world-rabies-day/>
> Don't forget to tweet us using #worldrabiesday
>
>
> On Fri, Aug 25, 2017 at 3:08 PM, Terence Scott <
> terence.sc...@rabiesalliance.org> wrote:
>
>> Dear All
>>
>> I have been attempting to create a programme indicator for a tracker with
>> registration that calculates the number of days since the incident (i.e.
>> the current date - the incident date).
>>
>> I have tried the following:
>>
>> d2:daysBetween(V{incident_date},V{current_date})
>>
>> I have also switched around the incident date and the current date as I
>> thought I may have gotten this wrong. The indicator shows up in the
>> programme under the indicators widget but the output is always "0". Clearly
>> I have done something wrong, but I just can't seem to identify what it is.
>>
>> Any help would be appreciated.
>>
>> Kind regards,
>> Terence
>>
>>
>> Terence Scott
>>
>> Global Alliance for Rabies Control (GARC)
>> Pan-African Rabies Control Network (PARACON) Steering Committee
>> terence.sc...@rabiesalliance.org
>> https://paracon.rabiesalliance.org
>> Skype: tpscott1987
>>
>> *World Rabies Day *is on* September 28th 2017*
>>
>>
>>
>> Take action: you can register your World Rabies Day event, nominate
>> someone for the WRD Awards and find out more here
>> <https://rabiesalliance.org/world-rabies-day/>
>> Don't forget to tweet us using #worldrabiesday
>>
>>
>
___
Mailing list: https://launchpad.net/~dhis2-users
Post to : dhis2-users@lists.launchpad.net
Unsubscribe : https://launchpad.net/~dhis2-users
More help   : https://help.launchpad.net/ListHelp

Re: [Dhis2-users] Programme indicator - Days between

[Terence Scott]

Nevermind, I managed to figure it out!

Terence Scott

Global Alliance for Rabies Control (GARC)
Pan-African Rabies Control Network (PARACON) Steering Committee
terence.sc...@rabiesalliance.org
https://paracon.rabiesalliance.org
Skype: tpscott1987

*World Rabies Day *is on* September 28th 2017*



Take action: you can register your World Rabies Day event, nominate someone
for the WRD Awards and find out more here
<https://rabiesalliance.org/world-rabies-day/>
Don't forget to tweet us using #worldrabiesday


On Fri, Aug 25, 2017 at 3:08 PM, Terence Scott <
terence.sc...@rabiesalliance.org> wrote:

> Dear All
>
> I have been attempting to create a programme indicator for a tracker with
> registration that calculates the number of days since the incident (i.e.
> the current date - the incident date).
>
> I have tried the following:
>
> d2:daysBetween(V{incident_date},V{current_date})
>
> I have also switched around the incident date and the current date as I
> thought I may have gotten this wrong. The indicator shows up in the
> programme under the indicators widget but the output is always "0". Clearly
> I have done something wrong, but I just can't seem to identify what it is.
>
> Any help would be appreciated.
>
> Kind regards,
> Terence
>
>
> Terence Scott
>
> Global Alliance for Rabies Control (GARC)
> Pan-African Rabies Control Network (PARACON) Steering Committee
> terence.sc...@rabiesalliance.org
> https://paracon.rabiesalliance.org
> Skype: tpscott1987
>
> *World Rabies Day *is on* September 28th 2017*
>
>
>
> Take action: you can register your World Rabies Day event, nominate
> someone for the WRD Awards and find out more here
> <https://rabiesalliance.org/world-rabies-day/>
> Don't forget to tweet us using #worldrabiesday
>
>
___
Mailing list: https://launchpad.net/~dhis2-users
Post to : dhis2-users@lists.launchpad.net
Unsubscribe : https://launchpad.net/~dhis2-users
More help   : https://help.launchpad.net/ListHelp

[Dhis2-users] Programme indicator - Days between

[Terence Scott]

Dear All

I have been attempting to create a programme indicator for a tracker with
registration that calculates the number of days since the incident (i.e.
the current date - the incident date).

I have tried the following:

d2:daysBetween(V{incident_date},V{current_date})

I have also switched around the incident date and the current date as I
thought I may have gotten this wrong. The indicator shows up in the
programme under the indicators widget but the output is always "0". Clearly
I have done something wrong, but I just can't seem to identify what it is.

Any help would be appreciated.

Kind regards,
Terence


Terence Scott

Global Alliance for Rabies Control (GARC)
Pan-African Rabies Control Network (PARACON) Steering Committee
terence.sc...@rabiesalliance.org
https://paracon.rabiesalliance.org
Skype: tpscott1987

*World Rabies Day *is on* September 28th 2017*



Take action: you can register your World Rabies Day event, nominate someone
for the WRD Awards and find out more here
<https://rabiesalliance.org/world-rabies-day/>
Don't forget to tweet us using #worldrabiesday
___
Mailing list: https://launchpad.net/~dhis2-users
Post to : dhis2-users@lists.launchpad.net
Unsubscribe : https://launchpad.net/~dhis2-users
More help   : https://help.launchpad.net/ListHelp

Re: [Dhis2-users] Betr: Import of coordinates fails in v2.27(DHIS2)

[Terence Scott]

Hi Kristiyan

I have experienced the same problems with import using the import tool. The
UI has a bug and the issue is currently open in Jira. Please vote for the
issue so that it can be prioritised and the bug can be fixed.

The Jira issue can be found here: https://jira.dhis2.org/browse/DHIS2-2069

If you are not on Jira, it takes a few seconds to register an account and
then vote for the issue.

I hope this helps.

Kind regards,
Terence

Terence Scott

Global Alliance for Rabies Control (GARC)
Pan-African Rabies Control Network (PARACON) Steering Committee
terence.sc...@rabiesalliance.org
https://paracon.rabiesalliance.org
Skype: tpscott1987

*World Rabies Day *is on* September 28th 2017*



Take action: you can register your World Rabies Day event, nominate someone
for the WRD Awards and find out more here
<https://rabiesalliance.org/world-rabies-day/>
Don't forget to tweet us using #worldrabiesday


On Mon, Aug 21, 2017 at 11:12 AM, Kristiyan Panayotov <
kristi...@logicaloutcomes.net> wrote:

> Hello all,
>
>
> Thanks for taking time to answer my question.
>
>
>
> I tried changing column names and did not get an error. Although, I still
> do not see the coordinates in the GIS app. DHIS2 is telling me that there
> are “No coordinates”. This works fine with manual entry of latitude and
> longitude but Not through a csv import.
>
>
>
> Jesus Solano-Roman – I will be happy to support you for a ticket on JIRA.
> Building a XML file is not an option as I have over 2000 units (points) for
> my OrgUnits.
>
>
>
> Kind Regards,
>
> Kris
>
>
>
> *From:* Jesus Solano-Roman [mailto:asol...@broadinstitute.org]
> *Sent:* 17 August 2017 14:42
> *To:* Gijsbert OOMS ; Kristiyan Panayotov <
> kristi...@logicaloutcomes.net>
> *Cc:* Solomon Kununga ;
> dhis2-d...@lists.launchpad.net; dhis2-users@lists.launchpad.net
> *Subject:* Re: [Dhis2-users] Betr: Import of coordinates fails in
> v2.27(DHIS2)
>
>
>
> Hello all.
>
>
>
> I have yet to submit an issue regarding this. In my case it was impossible
> to upload coordinates in CSV for event data. I tried with header, without
> header, using square brackets for the coordinates, using quotation marks,
> etc.
>
>
>
> If you have a comma without quotation marks the parser will think the
> second value belongs to the next column. If you have quotation marks it
> will not interpret the value as type coordinate and the import will fail.
>
>
>
> The only way I got around the problem was to import the data using XML.
>
>
>
> It would be nice to know if you can't make it work. That way I'd have more
> confidence submitting a ticket on JIRA.
>
>
>
>
>
>
>
> On Thu, Aug 17, 2017 at 6:32 AM Gijsbert OOMS 
> wrote:
>
> Hi Kristiyan,
>
>
> Would it be possible that you have one extra column somewhere (maybe a
> double comma) ?
>
> The way I understood csv-imports, DHIS2 doesn't read the column names in
> your csv but just counts the colums (see list of colums here
> <https://docs.dhis2.org/2.26/en/developer/html/webapi_csv_metadata_import.html>,
> Table 1.17). Coordinates should be in column nr 12, url should be in nr 13.
> From the log, it seems that DHIS2 thinks that you try to import a url. This
> probably means that your coordinates are in column nr 13 or "M", while they
> should be in column nr 12 or "N".
>
>
> *GIJSBERT OOMS*
> EXPERT D4D - Digitalisation for Development
>
> BELGIAN DEVELOPMENT AGENCY
> RUE HAUTE 147
> 1000 BRUSSELS
> T +32 (0)2 505 18 44 <+32%202%20505%2018%2044>
> F +32 (0)2 502 98 62 <+32%202%20502%2098%2062>
> M +32 (0)477 300 770
> WWW.BTCCTB.ORG <http://www.btcctb.org/>
>
> *Save paper! Think before you print*
>
>
>
> Van:Kristiyan Panayotov 
> Aan:"dhis2-d...@lists.launchpad.net"  net>, "dhis2-users@lists.launchpad.net" 
> Cc:Solomon Kununga 
> Datum:16/08/2017 10:23
> Onderwerp:[Dhis2-users] Import of coordinates fails in
> v2.27(DHIS2)
> Verzonden door:"Dhis2-users"  btcctb@lists.launchpad.net>
> --
>
>
>
>
> Dear all,
>
> My case is regarding the following: *DHIS->Import->CSV->Organizational
> Units->Coordinates.* I am not sure whether this is a bug or not well
> described in the documentation but import of coordinates does not work
> properly DHIS2 v.2.27.
>
> I have tried numerous combinations of arranging the latitude and longitude
> in my .CSV file and none of that worked when import in DHIS2. My feature
> type is “POINT”. This is the "Conflict" I get:
>
> ~
>

Re: [Dhis2-users] Programme Rule for a Yes/No DE

[Terence Scott]

Dear Saurabh

Thank you for your assistance. I tested this and it worked!

Kind regards,
Terence

Terence Scott

Global Alliance for Rabies Control (GARC)
Pan-African Rabies Control Network (PARACON) Steering Committee
terence.sc...@rabiesalliance.org
https://paracon.rabiesalliance.org
Skype: tpscott1987


On Tue, Jun 6, 2017 at 11:15 AM, Saurabh  wrote:

> Hi Terence
>
> Please use true/false (without braces '') instead of Yes/No in the program
> rule expression.
>
> The program rule expression #{AEFV} == false should work.
>
>
>
> On Tue, Jun 6, 2017 at 2:31 PM Terence Scott <
> terence.sc...@rabiesalliance.org> wrote:
>
>> Dear All
>>
>> I have attempted to create a programme rule that specifies that if "no
>> adverse effects following vaccination (AEFV) are experienced, then all of
>> the possible AEFV symptoms should be hidden."
>>
>> The DE for vaccine administered is a Yes/No DE. I have tried to create
>> the Expression as follows:
>> #{AEFV} == 'No'
>>
>> The actions are "Hide Field" for each of the symptoms (which are each a
>> DE themselves).
>>
>> I have then tested this in the tracker capture and it does not hide those
>> fields when entering data. I am sure that I am missing something, but I
>> can't seem to figure it out. I have also attached a screenshot of the
>> programme rule.
>>
>> I have made other programme rules that do work, but never for a Yes/No
>> data element.
>>
>> Any assistance would be appreciated.
>>
>> Kind regards,
>> Terence
>>
>>
>> Terence Scott
>>
>> Global Alliance for Rabies Control (GARC)
>> Pan-African Rabies Control Network (PARACON) Steering Committee
>> terence.sc...@rabiesalliance.org
>> https://paracon.rabiesalliance.org
>> Skype: tpscott1987
>>
>> ___
>> Mailing list: https://launchpad.net/~dhis2-users
>> Post to : dhis2-users@lists.launchpad.net
>> Unsubscribe : https://launchpad.net/~dhis2-users
>> More help   : https://help.launchpad.net/ListHelp
>>
> --
> Saurabh
> HISP India
>
___
Mailing list: https://launchpad.net/~dhis2-users
Post to : dhis2-users@lists.launchpad.net
Unsubscribe : https://launchpad.net/~dhis2-users
More help   : https://help.launchpad.net/ListHelp

[Dhis2-users] Programme Rule for a Yes/No DE

[Terence Scott]

Dear All

I have attempted to create a programme rule that specifies that if "no
adverse effects following vaccination (AEFV) are experienced, then all of
the possible AEFV symptoms should be hidden."

The DE for vaccine administered is a Yes/No DE. I have tried to create the
Expression as follows:
#{AEFV} == 'No'

The actions are "Hide Field" for each of the symptoms (which are each a DE
themselves).

I have then tested this in the tracker capture and it does not hide those
fields when entering data. I am sure that I am missing something, but I
can't seem to figure it out. I have also attached a screenshot of the
programme rule.

I have made other programme rules that do work, but never for a Yes/No data
element.

Any assistance would be appreciated.

Kind regards,
Terence


Terence Scott

Global Alliance for Rabies Control (GARC)
Pan-African Rabies Control Network (PARACON) Steering Committee
terence.sc...@rabiesalliance.org
https://paracon.rabiesalliance.org
Skype: tpscott1987
___
Mailing list: https://launchpad.net/~dhis2-users
Post to : dhis2-users@lists.launchpad.net
Unsubscribe : https://launchpad.net/~dhis2-users
More help   : https://help.launchpad.net/ListHelp

Re: [Dhis2-users] [Dhis2-devs] QR code scanner or barcode scanner for mobile inputs

[Terence Scott]

Dear Erling

Thank you for the information. I will look into it further and log a
request if needed. I just wanted to see whether there was anything
available in the short-term for DHIS2 so that we can plan any possible
projects around this information. If the projects are accepted, we will
certainly log the issue on the JIRA issue tracker as mentioned.

Thank you for your help!

Kind regards,
Terence

Terence Scott

Global Alliance for Rabies Control (GARC)
Pan-African Rabies Control Network (PARACON) Steering Committee
terence.sc...@rabiesalliance.org
https://paracon.rabiesalliance.org
Skype: tpscott1987


On Tue, Mar 28, 2017 at 3:57 PM, Erling Fjelstad  wrote:

> Helli Terence,
> Yes, it is feasible to include a QR/barcode scanner in the Android apps.
> It is not in the short-term plan to include such functionality. If you
> create an issue on our JIRA issue tracker then we can evaluate it when we
> plan for next development iteration.
> You can create an account and report the issue here: jira.dhis2.org -
> please report for the Android project.
>
> Regards,
> Erling - DHIS2 Android Team
>
> On Tue, Mar 28, 2017 at 3:48 PM Terence Scott <
> terence.sc...@rabiesalliance.org> wrote:
>
> Dear All
>
> I found a similar thread on the Launchpad forum (
> https://lists.launchpad.net/dhis2-users/msg06812.html) and was wondering
> whether there had been any further thought or progress into this idea?
>
> Would this be a feasible option to follow for the mobile apps (Android) by
> any chance or through any other path?
>
> Kind regards,
> Terence
>
>
> Terence Scott
>
> Global Alliance for Rabies Control (GARC)
> Pan-African Rabies Control Network (PARACON) Steering Committee
> terence.sc...@rabiesalliance.org
> https://paracon.rabiesalliance.org
> Skype: tpscott1987
>
> ___
> Mailing list: https://launchpad.net/~dhis2-devs
> Post to : dhis2-d...@lists.launchpad.net
> Unsubscribe : https://launchpad.net/~dhis2-devs
> More help   : https://help.launchpad.net/ListHelp
>
>
___
Mailing list: https://launchpad.net/~dhis2-users
Post to : dhis2-users@lists.launchpad.net
Unsubscribe : https://launchpad.net/~dhis2-users
More help   : https://help.launchpad.net/ListHelp

[Dhis2-users] QR code scanner or barcode scanner for mobile inputs

[Terence Scott]

Dear All

I found a similar thread on the Launchpad forum (
https://lists.launchpad.net/dhis2-users/msg06812.html) and was wondering
whether there had been any further thought or progress into this idea?

Would this be a feasible option to follow for the mobile apps (Android) by
any chance or through any other path?

Kind regards,
Terence


Terence Scott

Global Alliance for Rabies Control (GARC)
Pan-African Rabies Control Network (PARACON) Steering Committee
terence.sc...@rabiesalliance.org
https://paracon.rabiesalliance.org
Skype: tpscott1987
___
Mailing list: https://launchpad.net/~dhis2-users
Post to : dhis2-users@lists.launchpad.net
Unsubscribe : https://launchpad.net/~dhis2-users
More help   : https://help.launchpad.net/ListHelp

Re: [Dhis2-users] Interoperating 2 DHIS2 instances to pull data from one to other.

[Terence Scott]

Hi David

Thank you so much for the help! I will look into this and try it out with
the instances we are looking to mirror.

Kind regards,
Terence

Terence Scott

Global Alliance for Rabies Control (GARC)
Pan-African Rabies Control Network (PARACON) Steering Committee
terence.sc...@rabiesalliance.org
https://paracon.rabiesalliance.org
Skype: tpscott1987


On Tue, Feb 28, 2017 at 12:59 PM, David Huser  wrote:

> Hi Vunda and Terence
>
> Ideally you have an identical set of metadata for indicators, dataElements
> and dataSets (or dataElements and Programs). You can then pull dataValues
> (or events) via API of the source instance (1) and then post them again (2)
> to the API of the target instance. To routinely do this, install a cronjob
> which calls your script e.g. once a day.
>
> (1) https://docs.dhis2.org/2.22/en/developer/html/dhis2_
> developer_manual_full.html#d5274e1642
> https://docs.dhis2.org/2.22/en/developer/html/dhis2_
> developer_manual_full.html#d5274e1994
>
> (2) https://docs.dhis2.org/2.22/en/developer/html/dhis2_
> developer_manual_full.html#d5274e1316
> https://docs.dhis2.org/2.22/en/developer/html/dhis2_
> developer_manual_full.html#d5274e1788
>
> Best
> David
>
>
>
> On Tue, Feb 28, 2017 at 10:11 AM, Terence Scott <
> terence.sc...@rabiesalliance.org> wrote:
>
>> Hi Vunda
>>
>> We are also interested in interoperating two instances and would also
>> like to have data mirrored between the two instances automatically. Any
>> advice would be welcome as to how to proceed with this - we are
>> specifically interested in mirroring a tracker programme.
>>
>> Kind regards,
>> Terence
>>
>>
>> Terence Scott
>>
>> Global Alliance for Rabies Control (GARC)
>> Pan-African Rabies Control Network (PARACON) Steering Committee
>> terence.sc...@rabiesalliance.org
>> https://paracon.rabiesalliance.org
>> Skype: tpscott1987
>>
>>
>> On Wed, Feb 22, 2017 at 5:17 PM, vunda limbe  wrote:
>>
>>> Hi Every body,
>>>
>>> I want to interoperate two instance. the first is running version 2.22
>>> and the second is running v.2.23. I have a specific data elements,
>>> indicators that I want them pull automatically monthly data to the second
>>> Instance.
>>> I'm looking for a script or something else that can make its possible
>>> and the way  and where to set up.
>>> Your help is welcome,
>>>
>>>
>>> Thanks.
>>>
>>> ___
>>> Mailing list: https://launchpad.net/~dhis2-users
>>> Post to : dhis2-users@lists.launchpad.net
>>> Unsubscribe : https://launchpad.net/~dhis2-users
>>> More help   : https://help.launchpad.net/ListHelp
>>>
>>>
>>
>> ___
>> Mailing list: https://launchpad.net/~dhis2-users
>> Post to : dhis2-users@lists.launchpad.net
>> Unsubscribe : https://launchpad.net/~dhis2-users
>> More help   : https://help.launchpad.net/ListHelp
>>
>>
>
>
> --
>
>
> *David Huser*
> DHIS2 Support Specialist
> dhu...@baosystems.com | https://baosystems.com | Skype: dafhus | 2900 K
> Street, Suite 406, Washington D.C. 20007
>
___
Mailing list: https://launchpad.net/~dhis2-users
Post to : dhis2-users@lists.launchpad.net
Unsubscribe : https://launchpad.net/~dhis2-users
More help   : https://help.launchpad.net/ListHelp

Re: [Dhis2-users] Interoperating 2 DHIS2 instances to pull data from one to other.

[Terence Scott]

Hi Vunda

We are also interested in interoperating two instances and would also like
to have data mirrored between the two instances automatically. Any advice
would be welcome as to how to proceed with this - we are specifically
interested in mirroring a tracker programme.

Kind regards,
Terence


Terence Scott

Global Alliance for Rabies Control (GARC)
Pan-African Rabies Control Network (PARACON) Steering Committee
terence.sc...@rabiesalliance.org
https://paracon.rabiesalliance.org
Skype: tpscott1987


On Wed, Feb 22, 2017 at 5:17 PM, vunda limbe  wrote:

> Hi Every body,
>
> I want to interoperate two instance. the first is running version 2.22 and
> the second is running v.2.23. I have a specific data elements, indicators
> that I want them pull automatically monthly data to the second Instance.
> I'm looking for a script or something else that can make its possible and
> the way  and where to set up.
> Your help is welcome,
>
>
> Thanks.
>
> ___
> Mailing list: https://launchpad.net/~dhis2-users
> Post to : dhis2-users@lists.launchpad.net
> Unsubscribe : https://launchpad.net/~dhis2-users
> More help   : https://help.launchpad.net/ListHelp
>
>
___
Mailing list: https://launchpad.net/~dhis2-users
Post to : dhis2-users@lists.launchpad.net
Unsubscribe : https://launchpad.net/~dhis2-users
More help   : https://help.launchpad.net/ListHelp

Re: [Dhis2-users] Data not displaying in Pivot tables and Data Set reports

[Terence Scott]

Hi Lars

Thanks very much for the advice. We checked all of the points that you
mentioned and altered them as suggested for future reference also. It
seemed to be the problem with forgetting to regenerate the analytics tables
after data entry. We have thus set this as a scheduled event now!

Thanks again for all of the help and responses.

Kind regards,
Terence

Terence Scott

Global Alliance for Rabies Control (GARC)
Pan-African Rabies Control Network (PARACON) Steering Committee
terence.sc...@rabiesalliance.org
https://paracon.rabiesalliance.org
Skype: tpscott1987

#Rabies is 99.9% fatal, 100% preventable. Together, we can #EndRabiesNow.
Visit EndRabiesNow.org & sign the pledge
<https://endrabiesnow.org/take-action>.

On Mon, May 16, 2016 at 10:16 AM, Lars Helge Øverland 
wrote:

> Hi Terence
>
> 1. Did you forget to regenerate the analytics tables after data entry?
>
> It can be done ad-hoc
> <https://play.dhis2.org/demo/dhis-web-reporting/displayDataMartForm.action>
> or through scheduling
> <https://play.dhis2.org/demo/dhis-web-maintenance-dataadmin/viewScheduledTasks.action>
> .
>
> 2. Have you enabled the "hide unapproved data in analytics" under settings
> > approval ?
>
> 3. Have you set any "dimension restrictions for data analysis" for your
> users?
>
>
> If "no" to all above, can you please share a login to your system
> privately?
>
> regards,
>
> Lars
>
>
>
>
>
>
> On Mon, May 16, 2016 at 9:59 AM, Terence Scott <
> terence.sc...@rabiesalliance.org> wrote:
>
>> Dear All
>>
>> I found this thread on the LaunchPad (
>> https://lists.launchpad.net/dhis2-users/msg07859.html) and we are
>> experiencing similar problems with our data. We are able to have various
>> different users entering data into datasets, but as soon as you look to
>> generate a report or use data visualiser/pivot tables etc. then no data is
>> available.
>>
>> If you generate a report, the entire report format comes out clearly and
>> as it should be, but none of the entered data appears. So it is not
>> something to do with the creation of the data sets.
>>
>> Could anyone please provide any assistance?
>>
>> Kind regards,
>> Terence Scott
>>
>> Global Alliance for Rabies Control (GARC)
>> Pan-African Rabies Control Network (PARACON) Steering Committee
>> terence.sc...@rabiesalliance.org
>> https://paracon.rabiesalliance.org
>> Skype: tpscott1987
>>
>> #Rabies is 99.9% fatal, 100% preventable. Together, we can
>> #EndRabiesNow. Visit EndRabiesNow.org & sign the pledge
>> <https://endrabiesnow.org/take-action>.
>>
>> ___
>> Mailing list: https://launchpad.net/~dhis2-users
>> Post to : dhis2-users@lists.launchpad.net
>> Unsubscribe : https://launchpad.net/~dhis2-users
>> More help   : https://help.launchpad.net/ListHelp
>>
>>
>
>
> --
> Lars Helge Øverland
> Lead developer, DHIS 2
> University of Oslo
> Skype: larshelgeoverland
> l...@dhis2.org
> http://www.dhis2.org <https://www.dhis2.org/>
>
>
___
Mailing list: https://launchpad.net/~dhis2-users
Post to : dhis2-users@lists.launchpad.net
Unsubscribe : https://launchpad.net/~dhis2-users
More help   : https://help.launchpad.net/ListHelp

[Dhis2-users] Data not displaying in Pivot tables and Data Set reports

[Terence Scott]

Dear All

I found this thread on the LaunchPad (
https://lists.launchpad.net/dhis2-users/msg07859.html) and we are
experiencing similar problems with our data. We are able to have various
different users entering data into datasets, but as soon as you look to
generate a report or use data visualiser/pivot tables etc. then no data is
available.

If you generate a report, the entire report format comes out clearly and as
it should be, but none of the entered data appears. So it is not something
to do with the creation of the data sets.

Could anyone please provide any assistance?

Kind regards,
Terence Scott

Global Alliance for Rabies Control (GARC)
Pan-African Rabies Control Network (PARACON) Steering Committee
terence.sc...@rabiesalliance.org
https://paracon.rabiesalliance.org
Skype: tpscott1987

#Rabies is 99.9% fatal, 100% preventable. Together, we can #EndRabiesNow.
Visit EndRabiesNow.org & sign the pledge
<https://endrabiesnow.org/take-action>.
___
Mailing list: https://launchpad.net/~dhis2-users
Post to : dhis2-users@lists.launchpad.net
Unsubscribe : https://launchpad.net/~dhis2-users
More help   : https://help.launchpad.net/ListHelp

Re: [Dhis2-users] Longer frequency on Data Sets

[Terence Scott]

Dear Uwe

Thank you for your rapid response. This would be great if it could be done.

Kind regards,
Terence

Terence Scott

Global Alliance for Rabies Control (GARC)
Pan-African Rabies Control Network (PARACON) Steering Committee
terence.sc...@rabiesalliance.org
https://paracon.rabiesalliance.org
Skype: tpscott1987

#Rabies is 99.9% fatal, 100% preventable. Together, we can #EndRabiesNow.
Visit EndRabiesNow.org & sign the pledge
<https://endrabiesnow.org/take-action>.

On Thu, May 12, 2016 at 10:13 AM, Uwe Wahser  wrote:

> Dear Terence & DEVs,
>
> maybe this can be merged into a blueprint I filed a while ago with
> encouragement
> from  Lars?
>
> https://blueprints.launchpad.net/dhis2/+spec/enhance-date-filter
>
> Regards, Uwe
>
> ---
>
> > Terence Scott  hat am 12. Mai 2016 um
> 10:48
> > geschrieben:
> >
> >
> > Dear All
> >
> > I am currently working to develop several datasets that will be used for
> > the reporting of data. We have developed some data sets for 6 monthly
> > reports, but are also looking to have datasets that are only reported
> every
> > 3 years. On the frequency dropdown menu, there are only options for
> > "Annual" reporting.
> >
> > Is it possible to change this somehow, or to find another means to have a
> > 3-year reporting period?
> >
> > Kind regards,
> > Terence
> >
> >
> > Terence Scott
> >
> > Global Alliance for Rabies Control (GARC)
> > Pan-African Rabies Control Network (PARACON) Steering Committee
> > terence.sc...@rabiesalliance.org
> > https://paracon.rabiesalliance.org
> > Skype: tpscott1987
> >
> > #Rabies is 99.9% fatal, 100% preventable. Together, we can #EndRabiesNow.
> > Visit EndRabiesNow.org & sign the pledge
> > <https://endrabiesnow.org/take-action>.
> > ___
> > Mailing list: https://launchpad.net/~dhis2-users
> > Post to : dhis2-users@lists.launchpad.net
> > Unsubscribe : https://launchpad.net/~dhis2-users
> > More help   : https://help.launchpad.net/ListHelp
>
___
Mailing list: https://launchpad.net/~dhis2-users
Post to : dhis2-users@lists.launchpad.net
Unsubscribe : https://launchpad.net/~dhis2-users
More help   : https://help.launchpad.net/ListHelp

[Dhis2-users] Longer frequency on Data Sets

[Terence Scott]

Dear All

I am currently working to develop several datasets that will be used for
the reporting of data. We have developed some data sets for 6 monthly
reports, but are also looking to have datasets that are only reported every
3 years. On the frequency dropdown menu, there are only options for
"Annual" reporting.

Is it possible to change this somehow, or to find another means to have a
3-year reporting period?

Kind regards,
Terence


Terence Scott

Global Alliance for Rabies Control (GARC)
Pan-African Rabies Control Network (PARACON) Steering Committee
terence.sc...@rabiesalliance.org
https://paracon.rabiesalliance.org
Skype: tpscott1987

#Rabies is 99.9% fatal, 100% preventable. Together, we can #EndRabiesNow.
Visit EndRabiesNow.org & sign the pledge
<https://endrabiesnow.org/take-action>.
___
Mailing list: https://launchpad.net/~dhis2-users
Post to : dhis2-users@lists.launchpad.net
Unsubscribe : https://launchpad.net/~dhis2-users
More help   : https://help.launchpad.net/ListHelp

Re: [Dhis2-users] Data elements not showing when creating custom form

[Terence Scott]

Dear Abyot

Thank you for the suggestion. It seemed that there was a minor bug as we
upgraded DHIS 2 from 2.22 revision 21785 to revision 21901 and this
resolved the issue.

Kind regards,
Terence

Terence Scott

Global Alliance for Rabies Control (GARC)
Pan-African Rabies Control Network (PARACON) Steering Committee
terence.sc...@rabiesalliance.org
https://paracon.rabiesalliance.org
Skype: tpscott1987

#Rabies is 99.9% fatal, 100% preventable. Together, we can #EndRabiesNow.
Visit EndRabiesNow.org & sign the pledge
<https://endrabiesnow.org/take-action>.

On Thu, Mar 10, 2016 at 12:30 PM, Abyot Asalefew Gizaw 
wrote:

> Hello Terence,
>
> All data elements assigned to a data set should appear under the "Data
> elements" tab. Depending on category combination assigned to a data
> element, the rows in "Data element" tab could be more.
>
> For those data elements of value type yes/no, you should see three
> checkboxes (No value, Yes, No) when your custom form is rendered for data
> entry.
>
> ---
> Thank you,
> Abyot.
>
> On Mon, Mar 7, 2016 at 1:49 PM, Terence Scott <
> terence.sc...@rabiesalliance.org> wrote:
>
>> Dear DHIS2 users.
>>
>> We are currently working on version 2.22 of DHIS2.
>>
>> I am creating a data entry form and have several Yes/No questions that I
>> have built as data elements. When building these data elements, I have
>> stipulated that the "Value Type" should be 'Yes/No' and the "Aggregation
>> Operator" should be 'none'.
>>
>> When I go to design the data entry form (under Data Sets), some of the
>> data elements only appear under the "Totals" tab in the "insert data
>> elements, totals and indicators" box.
>>
>> When testing the data entry by inputting random data on the data entry
>> form, these boxes appear with a '0' in them already and dont have the
>> option of changing to either a 'Yes' or a 'No'.
>>
>> How do I change these data elements to appear under the "data elements"
>> tab in the "insert data elements, totals and indicators" box, and make them
>> into simple 'Yes/No' selection box questions?
>>
>>
>> Any help would be appreciated.
>>
>> Kind regards,
>> Terence Scott
>>
>> Global Alliance for Rabies Control (GARC)
>> Pan-African Rabies Control Network (PARACON) Steering Committee
>> terence.sc...@rabiesalliance.org
>> https://paracon.rabiesalliance.org
>> Skype: tpscott1987
>>
>> #Rabies is 99.9% fatal, 100% preventable. Together, we can
>> #EndRabiesNow. Visit EndRabiesNow.org & sign the pledge
>> <https://endrabiesnow.org/take-action>.
>>
>> ___
>> Mailing list: https://launchpad.net/~dhis2-users
>> Post to : dhis2-users@lists.launchpad.net
>> Unsubscribe : https://launchpad.net/~dhis2-users
>> More help   : https://help.launchpad.net/ListHelp
>>
>>
>
___
Mailing list: https://launchpad.net/~dhis2-users
Post to : dhis2-users@lists.launchpad.net
Unsubscribe : https://launchpad.net/~dhis2-users
More help   : https://help.launchpad.net/ListHelp

[Dhis2-users] Data elements not showing when creating custom form

[Terence Scott]

Dear DHIS2 users.

We are currently working on version 2.22 of DHIS2.

I am creating a data entry form and have several Yes/No questions that I
have built as data elements. When building these data elements, I have
stipulated that the "Value Type" should be 'Yes/No' and the "Aggregation
Operator" should be 'none'.

When I go to design the data entry form (under Data Sets), some of the data
elements only appear under the "Totals" tab in the "insert data elements,
totals and indicators" box.

When testing the data entry by inputting random data on the data entry
form, these boxes appear with a '0' in them already and dont have the
option of changing to either a 'Yes' or a 'No'.

How do I change these data elements to appear under the "data elements" tab
in the "insert data elements, totals and indicators" box, and make them
into simple 'Yes/No' selection box questions?


Any help would be appreciated.

Kind regards,
Terence Scott

Global Alliance for Rabies Control (GARC)
Pan-African Rabies Control Network (PARACON) Steering Committee
terence.sc...@rabiesalliance.org
https://paracon.rabiesalliance.org
Skype: tpscott1987

#Rabies is 99.9% fatal, 100% preventable. Together, we can #EndRabiesNow.
Visit EndRabiesNow.org & sign the pledge
<https://endrabiesnow.org/take-action>.
___
Mailing list: https://launchpad.net/~dhis2-users
Post to : dhis2-users@lists.launchpad.net
Unsubscribe : https://launchpad.net/~dhis2-users
More help   : https://help.launchpad.net/ListHelp