Re: [Dx4win] Update QSO Button

[Paul van der Eijk]

Hamad,

Thanks for reporting this; its fixed.

--Paul

PS I'm picking the 'easy' ones first :)


Hamad 9K2HN wrote:
> Hi,
>
>I have just found that when you click on "Update QSO" Button located in
> external data window (RAC 2009 Summer) the name goes to the notes (like the
> earlier versions) instead of the name field. I use this button a lot during
> US pile-up's.
>
> de 9k2hn
> Hamad
> __
> Dx4win mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Dx4win@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> 
>
>
> No virus found in this incoming message.
> Checked by AVG - www.avg.com 
> Version: 8.5.392 / Virus Database: 270.13.47/2290 - Release Date: 08/08/09 
> 06:10:00
>
>   
__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] WPX window and WAS window

[Jim Reisert AD1C]

Yes, I correct my message as well.  The "box" does move in 7.07, but
DX4WIN can't determine the state.  I tried spotting both a previous
QSO from my log (so DX4WIN would already know the state), and putting
the state in the comments field.  In either case, the title bar of the
window did not name the state.

Perhaps an improvement for some future version would be to cross-check
the spotted station against the log, and try to determine the state,
county, grid and IOTA, even if those are not in the spot itself.

- Jim

On Sat, Aug 8, 2009 at 10:39 PM, Paul van der Eijk wrote:
> My previous message may have been misleading; the WAS cannot update
> based on packet info, but should adjust the location of the band/mode
> selector.
>
> --Paul
>
> Matt Cassarino wrote:
>> Hello all
>>
>> Does anyone use the WPX window or WAS window ? I haven't seen any posts on
>> this about 8.01.
>>
>> I find that
>>
>> 1.the band box is no longer changing with incoming spots in the WAS window
>> and data is not appearing as to what Ive worked. Also WAS = shows nothing in
>> the title bar.
>>
>> 2. the WPX data is not appearing either though the band box does shift
>> around with spots coming in. Also WPX= shows nothing in the title bar.
>>
>> A new spot comes in and where 6 and 7  automatically looked up where I had
>> it worked and confirmed, it shows all the boxes for band and mode with
>> nothing in them.
>>
>> I reinstalled 7.07.02 and it works properly.
>>
>> While this is going on, DXCC , WAZ and Field windows are working fine.
>>
>> The WPX colors in the spot window are fine in 8.01.
>>
>> Thanks

-- 
Jim Reisert AD1C, , http://www.ad1c.us
__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] WPX window and WAS window

[Paul van der Eijk]

My previous message may have been misleading; the WAS cannot update
based on packet info, but should adjust the location of the band/mode
selector.

--Paul

Matt Cassarino wrote:
> Hello all
>
> Does anyone use the WPX window or WAS window ? I haven't seen any posts on
> this about 8.01.
>
> I find that
>
> 1.the band box is no longer changing with incoming spots in the WAS window
> and data is not appearing as to what Ive worked. Also WAS = shows nothing in
> the title bar.
>
> 2. the WPX data is not appearing either though the band box does shift
> around with spots coming in. Also WPX= shows nothing in the title bar.
>
> A new spot comes in and where 6 and 7  automatically looked up where I had
> it worked and confirmed, it shows all the boxes for band and mode with
> nothing in them.
>
> I reinstalled 7.07.02 and it works properly.
>
> While this is going on, DXCC , WAZ and Field windows are working fine.
>
> The WPX colors in the spot window are fine in 8.01.
>
> Thanks
>
>
>   
> 
>
>
> No virus found in this incoming message.
> Checked by AVG - www.avg.com 
> Version: 8.5.392 / Virus Database: 270.13.47/2290 - Release Date: 08/08/09 
> 06:10:00
>
>   
__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Minor skin bug

[Paul van der Eijk]

Mel,

Found and fixed,

--Paul

Mel wrote:
> Follow radio checkbox text not readable with MacOS and ITunes skins...
>
> Vista -- 96 dpi (default) - 1920x1200 resolution.
>
> mel, VE2DC
> __
> Dx4win mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Dx4win@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> 
>
>
> No virus found in this incoming message.
> Checked by AVG - www.avg.com 
> Version: 8.5.392 / Virus Database: 270.13.47/2290 - Release Date: 08/08/09 
> 06:10:00
>
>   
__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] WPX window and WAS window

[Paul van der Eijk]

Matt,

Found and fixed the WPX update problem; thanks for sending me the screen
shots etc.

--Paul

Matt Cassarino wrote:
> Hello all
>
> Does anyone use the WPX window or WAS window ? I haven't seen any posts on
> this about 8.01.
>
> I find that
>
> 1.the band box is no longer changing with incoming spots in the WAS window
> and data is not appearing as to what Ive worked. Also WAS = shows nothing in
> the title bar.
>
> 2. the WPX data is not appearing either though the band box does shift
> around with spots coming in. Also WPX= shows nothing in the title bar.
>
> A new spot comes in and where 6 and 7  automatically looked up where I had
> it worked and confirmed, it shows all the boxes for band and mode with
> nothing in them.
>
> I reinstalled 7.07.02 and it works properly.
>
> While this is going on, DXCC , WAZ and Field windows are working fine.
>
> The WPX colors in the spot window are fine in 8.01.
>
> Thanks
>
>
>   
> 
>
>
> No virus found in this incoming message.
> Checked by AVG - www.avg.com 
> Version: 8.5.392 / Virus Database: 270.13.47/2290 - Release Date: 08/08/09 
> 06:10:00
>
>   
__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] WPX window and WAS window

[Jim Reisert AD1C]

How can DX4WIN determine states from incoming spots, when there is no
indication as to the state of the spotted station?

I can confirm that WPX is not being updated.

73 - Jim AD1C

On Sat, Aug 8, 2009 at 7:00 PM, Matt Cassarino wrote:
> Hello all
>
> Does anyone use the WPX window or WAS window ? I haven't seen any posts on
> this about 8.01.
>
> I find that
>
> 1.the band box is no longer changing with incoming spots in the WAS window
> and data is not appearing as to what Ive worked. Also WAS = shows nothing in
> the title bar.
>
> 2. the WPX data is not appearing either though the band box does shift
> around with spots coming in. Also WPX= shows nothing in the title bar.
>
> A new spot comes in and where 6 and 7  automatically looked up where I had
> it worked and confirmed, it shows all the boxes for band and mode with
> nothing in them.
>
> I reinstalled 7.07.02 and it works properly.
>
> While this is going on, DXCC , WAZ and Field windows are working fine.
>
> The WPX colors in the spot window are fine in 8.01.
>
> Thanks
>
>
> --
> Matt
> __
> Dx4win mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Dx4win@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>



-- 
Jim Reisert AD1C, , http://www.ad1c.us
__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] Update QSO Button

[Hamad 9K2HN]

Hi,

   I have just found that when you click on "Update QSO" Button located in
external data window (RAC 2009 Summer) the name goes to the notes (like the
earlier versions) instead of the name field. I use this button a lot during
US pile-up's.

de 9k2hn
Hamad
__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] Minor skin bug

[Mel]

Follow radio checkbox text not readable with MacOS and ITunes skins...

Vista -- 96 dpi (default) - 1920x1200 resolution.

mel, VE2DC
__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] 60 Meters in Version 8.01

[Paul van der Eijk]

Larry,

60M is disabled in the awrds (File | Awards | Select WAZ tab)
(I don't think you can submit 60M for WAZ)

--Paul

Larry Burke wrote:
> Finally got around to installing v 8.01 today. A bit more painful than most
> upgrades of DX4WIN for some reason. Guess I will need to look through the
> archives for some of my issues, but one I do not recall being mentioned so
> far:  is anyone else having problems displaying 60 meter status in the WAZ
> and Country windows? It's also not in the Reports. I have 60m checked in the
> Station tab of the Preferences. Not sure what I am missing. 
>
> Some strange things with the CW totals, too, but I haven't dug into that
> enough to ask an intelligent question. 
>
>
>
> Larry Burke K5RK  
> Brazoria County Texas
>
>
> __
> Dx4win mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Dx4win@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> 
>
>
> No virus found in this incoming message.
> Checked by AVG - www.avg.com 
> Version: 8.5.392 / Virus Database: 270.13.47/2290 - Release Date: 08/08/09 
> 06:10:00
>
>   
__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] WPX window and WAS window

[Mel]

Normally I just display DXCC, Zone and VUCC and they work fine.

I checked it here and I confirm what you have noted... WPX and State 
don't display based on Spot info.

Mel



Matt Cassarino wrote:
> Hello all
> 
> Does anyone use the WPX window or WAS window ? I haven't seen any posts on
> this about 8.01.
> 
> I find that
> 
> 1.the band box is no longer changing with incoming spots in the WAS window
> and data is not appearing as to what Ive worked. Also WAS = shows nothing in
> the title bar.
> 
> 2. the WPX data is not appearing either though the band box does shift
> around with spots coming in. Also WPX= shows nothing in the title bar.
> 
> A new spot comes in and where 6 and 7  automatically looked up where I had
> it worked and confirmed, it shows all the boxes for band and mode with
> nothing in them.
> 
> I reinstalled 7.07.02 and it works properly.
> 
> While this is going on, DXCC , WAZ and Field windows are working fine.
> 
> The WPX colors in the spot window are fine in 8.01.
> 
> Thanks
> 
> 
__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] DX cluster hookup?

[Howard K2HK]

I run a simple macro that requires one click to log into a cluster. It would be 
more elegant for DX4Win to do it.

Howard..K2HK
HK



 

>> 
> There is no way to do an automatic connect. You still have to enter 
> your call. Please see the section called "Tips" here:
> 
> http://dx4win.ad1c.us/cluster/index.htm#tips
> 
> 73 - Jim AD1C
> 
__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] WPX window and WAS window

[Matt Cassarino]

Hello all

Does anyone use the WPX window or WAS window ? I haven't seen any posts on
this about 8.01.

I find that

1.the band box is no longer changing with incoming spots in the WAS window
and data is not appearing as to what Ive worked. Also WAS = shows nothing in
the title bar.

2. the WPX data is not appearing either though the band box does shift
around with spots coming in. Also WPX= shows nothing in the title bar.

A new spot comes in and where 6 and 7  automatically looked up where I had
it worked and confirmed, it shows all the boxes for band and mode with
nothing in them.

I reinstalled 7.07.02 and it works properly.

While this is going on, DXCC , WAZ and Field windows are working fine.

The WPX colors in the spot window are fine in 8.01.

Thanks


-- 
Matt
__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] 60 Meters in Version 8.01

[Larry Burke]

Finally got around to installing v 8.01 today. A bit more painful than most
upgrades of DX4WIN for some reason. Guess I will need to look through the
archives for some of my issues, but one I do not recall being mentioned so
far:  is anyone else having problems displaying 60 meter status in the WAZ
and Country windows? It's also not in the Reports. I have 60m checked in the
Station tab of the Preferences. Not sure what I am missing. 

Some strange things with the CW totals, too, but I haven't dug into that
enough to ask an intelligent question. 



Larry Burke K5RK  
Brazoria County Texas


__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] DX cluster hookup?

[Dennis Petrich]

Jim,  your last paragraph has been true but its not working these days on my 
V7 these days  Thats right, the VE7CC pregram can auto connect

Dennis



- Original Message - 
From: "Jim Reisert AD1C" 
To: "N8NN" 
Cc: "DX4WIN" 
Sent: Saturday, August 08, 2009 3:53 PM
Subject: Re: [Dx4win] DX cluster hookup?


On Sat, Aug 8, 2009 at 12:15 PM, N8NN wrote:

> Starting the cluster in DX4WIN is a chore that shouldn't have remained for 
> so many years. Apparently the DX cluster facility in DX4WIN is a very low 
> priority.


Paul tried to do something shortly before 8.01 was released, but ran
into a programming issue he could not solve.

If you use the VE7CC user program between DX4WIN and your cluster
node, then you don't even have to type in the callsign when connecting
DX4WIN to the cluster.  Plus the VE7CC program will do auto-reconnect
if the connection is lost.

-- 
Jim Reisert AD1C, , http://www.ad1c.us
__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__ Information from ESET NOD32 Antivirus, version of virus signature 
database 4317 (20090808) __

The message was checked by ESET NOD32 Antivirus.

http://www.eset.com




__ Information from ESET NOD32 Antivirus, version of virus signature 
database 4317 (20090808) __

The message was checked by ESET NOD32 Antivirus.

http://www.eset.com



__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Same station different operators and changed QTH

[sm0mpv]

I agree with you Mel, that it is excellent that changes in
Notes for this call update all. I use the ctrl E and add
several lines for those stations that have been working with
several operators and at different QTHs. As you I often
indicat several operators as multi. It is not possible to
use ctrl E in the Name and QTH field.

However, now when there is a new possibility with the Name
and QTH fields i think it would be nice if those could stay
with the QSO and the latest ones will be sugested in those
fields. If I got a QSL card and add the information from
that I suggest that all contacts with that station with
empty fields after that time wil be filled with the
information added. If there is any informetion in any of
these two fields in contacts made after the time you have
got confirmed by a QSL it should not be overwritten. The
program should not change any field prior to the one added.
You could then use the Notes for this call field to
summarize all changes for the station. So every time you
have contact with the station you can see the history in
that field. I hope this make some sence

73's de Mel - SM0MPV

> I can't speak for Paul... but the "problem" you identify
> is actually one
> of DX4Win's strengths... All the information is in one
> place. If you
> correct one occurrence, you correct them all. I would hate
> him to change
> that.
>
> What I do... and it works for me...
>
> If it is just a matter of recording the operator... I put
> Club or DXped
> or Spcl Envt in name depending on what is most
> appropriate...
>
> I put Op-name in the QSO Notes (Not Call Notes)
>
> In the situation where QTH is also variable... I think
> that's less
> common... also put QTH-location in the QSO notes.
>
> Just to review... Call notes (and now Name and QTH) are
> linked to a
> unique callsign... you change one and you have changed
> them all. QSO
> notes are unique to each Contact.
>
> Also, don't forget Ctrl-E opens up both notes into a
> multi-line memo...
> so you can store a lot of info.
>
> Mel
>
>
>
> The other situation I encounter... since I've been at this
> a while is
> the re-assigned call problem. In this case I put the
> Historical info
> into the CALL Notes (Not QSO Notes) and the new name and
> QTH in the
> appropriate fields. This instantly update ALL references
> to the same call.
>
>
> Claes "Mel" Carneheim wrote:
> > I have a problem and it is not new for version 8.01.
> >
> > I am QSL manager for a scout station and we work a lot
> of scout stations.
> > They could have different operators and change QTH from
> year to year.
> >
> > For example, SK0XA.
> >
> > 1969 Lasse Stockholm
> >
> > 1972 Bengt Farsta
> >
> > 1975 Sten Huddinge
> >
> > 1984 Marie Farsta
> >
> > Operator changes are common with other club stations too
> and there are some
> > examples of reissued old call signs. People move and
> change QTH but keep
> > their callsign.
> >
> > If I add a new operator and a new QTH to an existing the
> new one overwrites
> > the old.
> >
> > Is it possible to make the program suggest the old Name
> and QTH but if
> > changed the old is still kept with the old contacts and
> the new is saved
> > with the new name and QTH? If then the station is worked
> again the new
> > operator and QTH will be suggested.
> >
> > Thanks for a very interesting update
> >
> > Mel - SM0MPV
> >
> > 8S0C - Contest Call
> >
> >
> >   _
> >
> > Jag använder en gratisversion av SPAMfighter för
privata
> användare.
> > 367 spam har blivit blockerade hittills.
> > Betalande användare har inte detta meddelande i sin
> e-post.
> > Hämta gratis SPAMfighter
>   idag!
> >
> >
> __
> 
> > Dx4win mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/dx4win
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:Dx4win@mailman.qth.net
> >
> > This list hosted by: http://www.qsl.net
> > Please help support this email list:
> http://www.qsl.net/donate.html
> >
__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] 8.01 Group Selection - Date Filter

[Mel]

BTW... you are right. There does seem to be a problem creating permanent 
reusable filters.

Steve GW4BLE wrote:
> Mel,
> 
> Could you just explain that please. I haven't changed anything in my
> Ini file from version 7 - i guess that's what you refer to ?
> 
> Thanks.
> 
> 
> 
> -Original Message-
> From: Mel [mailto:ve...@videotron.ca] 
> Sent: 08 August 2009 23:44
> To: Steve GW4BLE
> Cc: dx4win@mailman.qth.net
> Subject: Re: [Dx4win] 8.01 Group Selection - Date Filter
> 
> Same as ver 7. You have to set "Range" in Preferences - QSO - Searching- 
> QSO Date
> 
> Steve GW4BLE wrote:
>> Under version 7 the Group Selection for a specific date range worked as:
>>
>> Group Selection
>> Filter -> Selection
>> Click on the Add button, change the name, enter the start/end dates, click
>> the
>> Date Filter box, then Update, then OK.
>>
>> Now, under version 8.01, I can't get any further than 'change the name', I
>> am 
>> Unable to enter start/end dates.
>>
>> Anyone else experience this?
>>
>> What I am ultimately trying to do is just export part of the log as ADIF
> for
>> a specific date period.
>>
>>
>> Steve
>> GW4BLE
>>
>> __
>> Dx4win mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/dx4win
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Dx4win@mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>>
> 
> 
__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] 8.01 Group Selection - Date Filter

[Steve GW4BLE]

Mel,

Could you just explain that please. I haven't changed anything in my
Ini file from version 7 - i guess that's what you refer to ?

Thanks.



-Original Message-
From: Mel [mailto:ve...@videotron.ca] 
Sent: 08 August 2009 23:44
To: Steve GW4BLE
Cc: dx4win@mailman.qth.net
Subject: Re: [Dx4win] 8.01 Group Selection - Date Filter

Same as ver 7. You have to set "Range" in Preferences - QSO - Searching- 
QSO Date

Steve GW4BLE wrote:
> Under version 7 the Group Selection for a specific date range worked as:
> 
> Group Selection
> Filter -> Selection
> Click on the Add button, change the name, enter the start/end dates, click
> the
> Date Filter box, then Update, then OK.
> 
> Now, under version 8.01, I can't get any further than 'change the name', I
> am 
> Unable to enter start/end dates.
> 
> Anyone else experience this?
> 
> What I am ultimately trying to do is just export part of the log as ADIF
for
> a specific date period.
> 
> 
> Steve
> GW4BLE
> 
> __
> Dx4win mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Dx4win@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> 

__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] 8.01 Group Selection - Date Filter

[Mel]

Same as ver 7. You have to set "Range" in Preferences - QSO - Searching- 
QSO Date

Steve GW4BLE wrote:
> Under version 7 the Group Selection for a specific date range worked as:
> 
> Group Selection
> Filter -> Selection
> Click on the Add button, change the name, enter the start/end dates, click
> the
> Date Filter box, then Update, then OK.
> 
> Now, under version 8.01, I can't get any further than 'change the name', I
> am 
> Unable to enter start/end dates.
> 
> Anyone else experience this?
> 
> What I am ultimately trying to do is just export part of the log as ADIF for
> a specific date period.
> 
> 
> Steve
> GW4BLE
> 
> __
> Dx4win mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Dx4win@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> 
__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] 8.01 Group Selection - Date Filter

[Steve GW4BLE]

Under version 7 the Group Selection for a specific date range worked as:

Group Selection
Filter -> Selection
Click on the Add button, change the name, enter the start/end dates, click
the
Date Filter box, then Update, then OK.

Now, under version 8.01, I can't get any further than 'change the name', I
am 
Unable to enter start/end dates.

Anyone else experience this?

What I am ultimately trying to do is just export part of the log as ADIF for
a specific date period.


Steve
GW4BLE

__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Ver 8.01 issues

[Mel]

That's about 195 more than I had... I see your problem ;-)

For now... just convert your existing file and take care of the 
extracting names and frequencies when Paul has had a chance to refine 
the extraction process.

...Mel, VE2DC

Tonno Vahk wrote:
> I have ca 200 groups:) for every contest.
> 
> Looks like we have to wait indeed:)
> 
> tonno
> 
> -Original Message-
> From: Mel [mailto:ve...@videotron.ca] 
> Sent: Sunday, August 09, 2009 12:31 AM
> To: Tonno Vahk
> Cc: dx4win@mailman.qth.net
> Subject: Re: [Dx4win] Ver 8.01 issues
> 
> Can you re-assign the groups? I was able to do that because I only a few 
> groups that I could re-select and set by date. Perhaps your situation is 
> more complex.
> 
> I also ran into Cesar'a issue of Invalid QSOs not being flagged after 
> conversion... might another small thing Paul overlooked. Again, in my 
> case, I just listed them in V7 and set them manually. Just a few dozen.
> 
> The smart thing to do is wait about a month to upgrade... but who wants 
> to wait ;-)
> 
> Tonno Vahk wrote:
>> Mel, that is what I am saying - in that case it does not double but I
> cannot
>> use it because importing into new empty log file does not bring the Groups
>> along. All the Groups are missing and I don't know how to get them to come
>> along from the old file. They are the same kind of "hidden" info like
> Notes
>> for This Call. You have both or you have neither it seems...
>>
>> -Original Message-
>> From: dx4win-boun...@mailman.qth.net
> [mailto:dx4win-boun...@mailman.qth.net]
>> On Behalf Of Mel
>> Sent: Saturday, August 08, 2009 11:19 PM
>> Cc: dx4win@mailman.qth.net
>> Subject: Re: [Dx4win] Ver 8.01 issues
>>
>> When you re-import you log into an empty file from a DXQ/DXN set... it
>> should not double up...
>>
>> I tried Guy's solution also. I had been using | as a separator... but I
>> also had many records with 3 fields... result was a 6 solid hours of
>> "fixup"... not something I ever want to do again!
>>
>>
>> Tonno Vahk wrote:
>>> It does not work this way Guy!
>>>
>>> I am also in trouble with the delimiter as I have used space between name
>>> and QTH.
>>>
>>> I have been trying to find way to export the log to change the delimiter
>> but
>>> it is impossible with DXQ-QXN export-import because the Notes for This
>> Call
>>> gets doubled! Meaning the old values are not replaced whatever you do but
>>> anything you import on top of them are added with "/".
>>>
>>> Even if you export your log, delete ALL QSOs after that and import all
> the
>>> QSOs back then your Notes for This Call get multiplied by two with "/" in
>>> between. Crazy.
>>>
>>> And it is not possible to open a new log file (thus getting rid of the
> old
>>> Notes... data) and import all QSOs there because then you also lose all
>> the
>>> Groups list.
>>>
>>> Thus as far as I have no idea how do change delimiter automatically in
>> ADIF
>>> file with my domestic tools like excel etc I don't see any way to
>> accomplish
>>> this task without the program being modified to let the user choose the
>>> delimiter, better yet logic similar to Excel Text to Columns.
>>>
>>> What I really need is to be able to split at the first space. As there
> are
>>> often spaces in QTH description (like near Rome or alike).
>>>
>>> 73
>>> Tonno
>>> ES5TV
>>>
>>> -Original Message-
>>> From: dx4win-boun...@mailman.qth.net
>> [mailto:dx4win-boun...@mailman.qth.net]
>>> On Behalf Of ON4AOI
>>> Sent: Tuesday, August 04, 2009 6:27 PM
>>> To: 'Mel'
>>> Cc: dx4win@mailman.qth.net
>>> Subject: Re: [Dx4win] Ver 8.01 issues
>>>
>>> Thats normally fixed in a few minutes
>>> In version 7
>>> Export your log >>> DX4WIN6
>>> THE *.DXN file contains the name and qth, change the delimiter with
>> textpad
>>> or similar to IN
>>> Save and import
>>>
>>> Guy ON4AOI
>>>
 -Oorspronkelijk bericht-
 Van: Mel [mailto:ve...@videotron.ca]
 Verzonden: dinsdag 4 augustus 2009 17:18
 Aan: ON4AOI
 Onderwerp: Re: [Dx4win] Ver 8.01 issues

 very nice... but I have 25,000 QSOs not formatted that way Guy ;-)

 ON4AOI wrote:
> Mel and others
>
> The delimiter in or IN works perfect
>
> So MEL IN STE-MARTINE works 100 %
>
> And will populate Name = MEL and QTH= STE-MARTINE
>
> When you do multiple QSO´s operations - Set Name and Qth
>
> Guy ON4AOI
>
>
>
>> -Oorspronkelijk bericht-
>> Van: dx4win-boun...@mailman.qth.net [mailto:dx4win-
>> boun...@mailman.qth.net] Namens Mel
>> Verzonden: dinsdag 4 augustus 2009 17:07
>> Aan: David, K2DBK
>> CC: DX4WIN
>> Onderwerp: Re: [Dx4win] Ver 8.01 issues
>>
>> I would suggest that you not use DX4Win to populate the name and QTH
>> fields then. If Paul doesn't allow a specified delimiter ("," or "|"
 or
>> "in") then either Jim will modify one of his programs or I will
 write a
>> new one. I already have a program than could 

Re: [Dx4win] Same station different operators and changed QTH

[Mel]

I can't speak for Paul... but the "problem" you identify is actually one 
of DX4Win's strengths... All the information is in one place. If you 
correct one occurrence, you correct them all. I would hate him to change 
that.

What I do... and it works for me...

If it is just a matter of recording the operator... I put Club or DXped 
or Spcl Envt in name depending on what is most appropriate...

I put Op-name in the QSO Notes (Not Call Notes)

In the situation where QTH is also variable... I think that's less 
common... also put QTH-location in the QSO notes.

Just to review... Call notes (and now Name and QTH) are linked to a 
unique callsign... you change one and you have changed them all. QSO 
notes are unique to each Contact.

Also, don't forget Ctrl-E opens up both notes into a multi-line memo... 
so you can store a lot of info.

...Mel



The other situation I encounter... since I've been at this a while is 
the re-assigned call problem. In this case I put the Historical info 
into the CALL Notes (Not QSO Notes) and the new name and QTH in the 
appropriate fields. This instantly update ALL references to the same call.


Claes "Mel" Carneheim wrote:
> I have a problem and it is not new for version 8.01. 
> 
> I am QSL manager for a scout station and we work a lot of scout stations.
> They could have different operators and change QTH from year to year. 
> 
> For example, SK0XA. 
> 
> 1969 Lasse Stockholm 
> 
> 1972 Bengt Farsta 
> 
> 1975 Sten Huddinge 
> 
> 1984 Marie Farsta 
> 
> Operator changes are common with other club stations too and there are some
> examples of reissued old call signs. People move and change QTH but keep
> their callsign. 
> 
> If I add a new operator and a new QTH to an existing the new one overwrites
> the old. 
> 
> Is it possible to make the program suggest the old Name and QTH but if
> changed the old is still kept with the old contacts and the new is saved
> with the new name and QTH? If then the station is worked again the new
> operator and QTH will be suggested. 
> 
> Thanks for a very interesting update 
> 
> Mel - SM0MPV 
> 
> 8S0C - Contest Call 
> 
> 
>   _  
> 
> Jag använder en gratisversion av SPAMfighter för privata användare.
> 367 spam har blivit blockerade hittills.
> Betalande användare har inte detta meddelande i sin e-post.
> Hämta gratis SPAMfighter   idag! 
> 
> __
> Dx4win mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Dx4win@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> 
__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Ver 8.01 issues

[Tonno Vahk]

I have ca 200 groups:) for every contest.

Looks like we have to wait indeed:)

tonno

-Original Message-
From: Mel [mailto:ve...@videotron.ca] 
Sent: Sunday, August 09, 2009 12:31 AM
To: Tonno Vahk
Cc: dx4win@mailman.qth.net
Subject: Re: [Dx4win] Ver 8.01 issues

Can you re-assign the groups? I was able to do that because I only a few 
groups that I could re-select and set by date. Perhaps your situation is 
more complex.

I also ran into Cesar'a issue of Invalid QSOs not being flagged after 
conversion... might another small thing Paul overlooked. Again, in my 
case, I just listed them in V7 and set them manually. Just a few dozen.

The smart thing to do is wait about a month to upgrade... but who wants 
to wait ;-)

Tonno Vahk wrote:
> Mel, that is what I am saying - in that case it does not double but I
cannot
> use it because importing into new empty log file does not bring the Groups
> along. All the Groups are missing and I don't know how to get them to come
> along from the old file. They are the same kind of "hidden" info like
Notes
> for This Call. You have both or you have neither it seems...
> 
> -Original Message-
> From: dx4win-boun...@mailman.qth.net
[mailto:dx4win-boun...@mailman.qth.net]
> On Behalf Of Mel
> Sent: Saturday, August 08, 2009 11:19 PM
> Cc: dx4win@mailman.qth.net
> Subject: Re: [Dx4win] Ver 8.01 issues
> 
> When you re-import you log into an empty file from a DXQ/DXN set... it
> should not double up...
> 
> I tried Guy's solution also. I had been using | as a separator... but I
> also had many records with 3 fields... result was a 6 solid hours of
> "fixup"... not something I ever want to do again!
> 
> 
> Tonno Vahk wrote:
>> It does not work this way Guy!
>>
>> I am also in trouble with the delimiter as I have used space between name
>> and QTH.
>>
>> I have been trying to find way to export the log to change the delimiter
> but
>> it is impossible with DXQ-QXN export-import because the Notes for This
> Call
>> gets doubled! Meaning the old values are not replaced whatever you do but
>> anything you import on top of them are added with "/".
>>
>> Even if you export your log, delete ALL QSOs after that and import all
the
>> QSOs back then your Notes for This Call get multiplied by two with "/" in
>> between. Crazy.
>>
>> And it is not possible to open a new log file (thus getting rid of the
old
>> Notes... data) and import all QSOs there because then you also lose all
> the
>> Groups list.
>>
>> Thus as far as I have no idea how do change delimiter automatically in
> ADIF
>> file with my domestic tools like excel etc I don't see any way to
> accomplish
>> this task without the program being modified to let the user choose the
>> delimiter, better yet logic similar to Excel Text to Columns.
>>
>> What I really need is to be able to split at the first space. As there
are
>> often spaces in QTH description (like near Rome or alike).
>>
>> 73
>> Tonno
>> ES5TV
>>
>> -Original Message-
>> From: dx4win-boun...@mailman.qth.net
> [mailto:dx4win-boun...@mailman.qth.net]
>> On Behalf Of ON4AOI
>> Sent: Tuesday, August 04, 2009 6:27 PM
>> To: 'Mel'
>> Cc: dx4win@mailman.qth.net
>> Subject: Re: [Dx4win] Ver 8.01 issues
>>
>> Thats normally fixed in a few minutes
>> In version 7
>> Export your log >>> DX4WIN6
>> THE *.DXN file contains the name and qth, change the delimiter with
> textpad
>> or similar to IN
>> Save and import
>>
>> Guy ON4AOI
>>
>>> -Oorspronkelijk bericht-
>>> Van: Mel [mailto:ve...@videotron.ca]
>>> Verzonden: dinsdag 4 augustus 2009 17:18
>>> Aan: ON4AOI
>>> Onderwerp: Re: [Dx4win] Ver 8.01 issues
>>>
>>> very nice... but I have 25,000 QSOs not formatted that way Guy ;-)
>>>
>>> ON4AOI wrote:
 Mel and others

 The delimiter in or IN works perfect

 So MEL IN STE-MARTINE works 100 %

 And will populate Name = MEL and QTH= STE-MARTINE

 When you do multiple QSO´s operations - Set Name and Qth

 Guy ON4AOI



> -Oorspronkelijk bericht-
> Van: dx4win-boun...@mailman.qth.net [mailto:dx4win-
> boun...@mailman.qth.net] Namens Mel
> Verzonden: dinsdag 4 augustus 2009 17:07
> Aan: David, K2DBK
> CC: DX4WIN
> Onderwerp: Re: [Dx4win] Ver 8.01 issues
>
> I would suggest that you not use DX4Win to populate the name and QTH
> fields then. If Paul doesn't allow a specified delimiter ("," or "|"
>>> or
> "in") then either Jim will modify one of his programs or I will
>>> write a
> new one. I already have a program than could do this (To recognize a
> ","
> as well as "|" is a one line change) but it works with ADIF which
> doesn't preserve LotW status for example. I used it to transfer
>>> DX4Win
> data to another logger I was testing (D4W was better). Jim's
>>> programs
> work with DXQ which is preferable... so I'm hoping that he might
>>> hack
> one of his programs if we ask him really nicely ;-)
>
> Mel...V

Re: [Dx4win] Ver 8.01 issues

[Mel]

Can you re-assign the groups? I was able to do that because I only a few 
groups that I could re-select and set by date. Perhaps your situation is 
more complex.

I also ran into Cesar'a issue of Invalid QSOs not being flagged after 
conversion... might another small thing Paul overlooked. Again, in my 
case, I just listed them in V7 and set them manually. Just a few dozen.

The smart thing to do is wait about a month to upgrade... but who wants 
to wait ;-)

Tonno Vahk wrote:
> Mel, that is what I am saying - in that case it does not double but I cannot
> use it because importing into new empty log file does not bring the Groups
> along. All the Groups are missing and I don't know how to get them to come
> along from the old file. They are the same kind of "hidden" info like Notes
> for This Call. You have both or you have neither it seems...
> 
> -Original Message-
> From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
> On Behalf Of Mel
> Sent: Saturday, August 08, 2009 11:19 PM
> Cc: dx4win@mailman.qth.net
> Subject: Re: [Dx4win] Ver 8.01 issues
> 
> When you re-import you log into an empty file from a DXQ/DXN set... it
> should not double up...
> 
> I tried Guy's solution also. I had been using | as a separator... but I
> also had many records with 3 fields... result was a 6 solid hours of
> "fixup"... not something I ever want to do again!
> 
> 
> Tonno Vahk wrote:
>> It does not work this way Guy!
>>
>> I am also in trouble with the delimiter as I have used space between name
>> and QTH.
>>
>> I have been trying to find way to export the log to change the delimiter
> but
>> it is impossible with DXQ-QXN export-import because the Notes for This
> Call
>> gets doubled! Meaning the old values are not replaced whatever you do but
>> anything you import on top of them are added with "/".
>>
>> Even if you export your log, delete ALL QSOs after that and import all the
>> QSOs back then your Notes for This Call get multiplied by two with "/" in
>> between. Crazy.
>>
>> And it is not possible to open a new log file (thus getting rid of the old
>> Notes... data) and import all QSOs there because then you also lose all
> the
>> Groups list.
>>
>> Thus as far as I have no idea how do change delimiter automatically in
> ADIF
>> file with my domestic tools like excel etc I don't see any way to
> accomplish
>> this task without the program being modified to let the user choose the
>> delimiter, better yet logic similar to Excel Text to Columns.
>>
>> What I really need is to be able to split at the first space. As there are
>> often spaces in QTH description (like near Rome or alike).
>>
>> 73
>> Tonno
>> ES5TV
>>
>> -Original Message-
>> From: dx4win-boun...@mailman.qth.net
> [mailto:dx4win-boun...@mailman.qth.net]
>> On Behalf Of ON4AOI
>> Sent: Tuesday, August 04, 2009 6:27 PM
>> To: 'Mel'
>> Cc: dx4win@mailman.qth.net
>> Subject: Re: [Dx4win] Ver 8.01 issues
>>
>> Thats normally fixed in a few minutes
>> In version 7
>> Export your log >>> DX4WIN6
>> THE *.DXN file contains the name and qth, change the delimiter with
> textpad
>> or similar to IN
>> Save and import
>>
>> Guy ON4AOI
>>
>>> -Oorspronkelijk bericht-
>>> Van: Mel [mailto:ve...@videotron.ca]
>>> Verzonden: dinsdag 4 augustus 2009 17:18
>>> Aan: ON4AOI
>>> Onderwerp: Re: [Dx4win] Ver 8.01 issues
>>>
>>> very nice... but I have 25,000 QSOs not formatted that way Guy ;-)
>>>
>>> ON4AOI wrote:
 Mel and others

 The delimiter in or IN works perfect

 So MEL IN STE-MARTINE works 100 %

 And will populate Name = MEL and QTH= STE-MARTINE

 When you do multiple QSO´s operations - Set Name and Qth

 Guy ON4AOI



> -Oorspronkelijk bericht-
> Van: dx4win-boun...@mailman.qth.net [mailto:dx4win-
> boun...@mailman.qth.net] Namens Mel
> Verzonden: dinsdag 4 augustus 2009 17:07
> Aan: David, K2DBK
> CC: DX4WIN
> Onderwerp: Re: [Dx4win] Ver 8.01 issues
>
> I would suggest that you not use DX4Win to populate the name and QTH
> fields then. If Paul doesn't allow a specified delimiter ("," or "|"
>>> or
> "in") then either Jim will modify one of his programs or I will
>>> write a
> new one. I already have a program than could do this (To recognize a
> ","
> as well as "|" is a one line change) but it works with ADIF which
> doesn't preserve LotW status for example. I used it to transfer
>>> DX4Win
> data to another logger I was testing (D4W was better). Jim's
>>> programs
> work with DXQ which is preferable... so I'm hoping that he might
>>> hack
> one of his programs if we ask him really nicely ;-)
>
> Mel...VE2DC
>
> David, K2DBK wrote:
>> I'd been using ","  (such as   "David, River Vale") but I can live
> with
>> it. I suppose the optimal solution would be to have the user
>>> specify
> the
>> delimiter, but if I really feel the need I can export 

Re: [Dx4win] DX cluster hookup?

[Dave Sharred]

One workaround could be to integrate the VE7CC module into DX4Win ?

I imagine the same way that you call up Buckmaster or whatever - fire up an
executable that is VE7CC ?? Just automate the workaround !

73

Dave
G3NKC

-Original Message-
From: dx4win-boun...@mailman.qth.net
[mailto:dx4win-boun...@mailman.qth.net]on Behalf Of Jim Reisert AD1C
Sent: 08 August 2009 21:54
To: N8NN
Cc: DX4WIN
Subject: Re: [Dx4win] DX cluster hookup?


On Sat, Aug 8, 2009 at 12:15 PM, N8NN wrote:

> Starting the cluster in DX4WIN is a chore that shouldn't have remained for
so many years.  Apparently the DX cluster facility in DX4WIN is a very low
priority.


Paul tried to do something shortly before 8.01 was released, but ran
into a programming issue he could not solve.

If you use the VE7CC user program between DX4WIN and your cluster
node, then you don't even have to type in the callsign when connecting
DX4WIN to the cluster.  Plus the VE7CC program will do auto-reconnect
if the connection is lost.

--
Jim Reisert AD1C, , http://www.ad1c.us
__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] Same station different operators and changed QTH

[Claes "Mel" Carneheim]

I have a problem and it is not new for version 8.01. 

I am QSL manager for a scout station and we work a lot of scout stations.
They could have different operators and change QTH from year to year. 

For example, SK0XA. 

1969 Lasse Stockholm 

1972 Bengt Farsta 

1975 Sten Huddinge 

1984 Marie Farsta 

Operator changes are common with other club stations too and there are some
examples of reissued old call signs. People move and change QTH but keep
their callsign. 

If I add a new operator and a new QTH to an existing the new one overwrites
the old. 

Is it possible to make the program suggest the old Name and QTH but if
changed the old is still kept with the old contacts and the new is saved
with the new name and QTH? If then the station is worked again the new
operator and QTH will be suggested. 

Thanks for a very interesting update 

Mel - SM0MPV 

8S0C - Contest Call 


  _  

Jag använder en gratisversion av SPAMfighter för privata användare.
367 spam har blivit blockerade hittills.
Betalande användare har inte detta meddelande i sin e-post.
Hämta gratis SPAMfighter   idag! 

__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Use of F8 problem.

[Ing . Miloš Prostecký]

Dear Mel,

that problem is given as in our setting in the number notation is comma and
not a separator as informed me Paul KK4HD.

Milos, OK1MP


??? F8 works fine with the new version. There is no difference between a 
"new" QSO and an "old" QSO. Did you open the correct file?

Ing. Milo? Prosteck? wrote:
> After upgrading to 8.01 it is not possible to find new calls by F8 key
which
> was add to log. What is wrong? All old contact are correct.
> 
> 73, 
> 
> Milos, OK1MP
> 

No virus found in this outgoing message.
Checked by AVG - www.avg.com 
Version: 8.5.406 / Virus Database: 270.13.47/2289 - Release Date: 08/07/09
18:37:00

__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Ver 8.01 issues

[Tonno Vahk]

Mel, that is what I am saying - in that case it does not double but I cannot
use it because importing into new empty log file does not bring the Groups
along. All the Groups are missing and I don't know how to get them to come
along from the old file. They are the same kind of "hidden" info like Notes
for This Call. You have both or you have neither it seems...

-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of Mel
Sent: Saturday, August 08, 2009 11:19 PM
Cc: dx4win@mailman.qth.net
Subject: Re: [Dx4win] Ver 8.01 issues

When you re-import you log into an empty file from a DXQ/DXN set... it
should not double up...

I tried Guy's solution also. I had been using | as a separator... but I
also had many records with 3 fields... result was a 6 solid hours of
"fixup"... not something I ever want to do again!


Tonno Vahk wrote:
> It does not work this way Guy!
> 
> I am also in trouble with the delimiter as I have used space between name
> and QTH.
> 
> I have been trying to find way to export the log to change the delimiter
but
> it is impossible with DXQ-QXN export-import because the Notes for This
Call
> gets doubled! Meaning the old values are not replaced whatever you do but
> anything you import on top of them are added with "/".
> 
> Even if you export your log, delete ALL QSOs after that and import all the
> QSOs back then your Notes for This Call get multiplied by two with "/" in
> between. Crazy.
> 
> And it is not possible to open a new log file (thus getting rid of the old
> Notes... data) and import all QSOs there because then you also lose all
the
> Groups list.
> 
> Thus as far as I have no idea how do change delimiter automatically in
ADIF
> file with my domestic tools like excel etc I don't see any way to
accomplish
> this task without the program being modified to let the user choose the
> delimiter, better yet logic similar to Excel Text to Columns.
> 
> What I really need is to be able to split at the first space. As there are
> often spaces in QTH description (like near Rome or alike).
> 
> 73
> Tonno
> ES5TV
> 
> -Original Message-
> From: dx4win-boun...@mailman.qth.net
[mailto:dx4win-boun...@mailman.qth.net]
> On Behalf Of ON4AOI
> Sent: Tuesday, August 04, 2009 6:27 PM
> To: 'Mel'
> Cc: dx4win@mailman.qth.net
> Subject: Re: [Dx4win] Ver 8.01 issues
> 
> Thats normally fixed in a few minutes
> In version 7
> Export your log >>> DX4WIN6
> THE *.DXN file contains the name and qth, change the delimiter with
textpad
> or similar to IN
> Save and import
> 
> Guy ON4AOI
> 
>> -Oorspronkelijk bericht-
>> Van: Mel [mailto:ve...@videotron.ca]
>> Verzonden: dinsdag 4 augustus 2009 17:18
>> Aan: ON4AOI
>> Onderwerp: Re: [Dx4win] Ver 8.01 issues
>>
>> very nice... but I have 25,000 QSOs not formatted that way Guy ;-)
>>
>> ON4AOI wrote:
>>> Mel and others
>>>
>>> The delimiter in or IN works perfect
>>>
>>> So MEL IN STE-MARTINE works 100 %
>>>
>>> And will populate Name = MEL and QTH= STE-MARTINE
>>>
>>> When you do multiple QSO´s operations - Set Name and Qth
>>>
>>> Guy ON4AOI
>>>
>>>
>>>
 -Oorspronkelijk bericht-
 Van: dx4win-boun...@mailman.qth.net [mailto:dx4win-
 boun...@mailman.qth.net] Namens Mel
 Verzonden: dinsdag 4 augustus 2009 17:07
 Aan: David, K2DBK
 CC: DX4WIN
 Onderwerp: Re: [Dx4win] Ver 8.01 issues

 I would suggest that you not use DX4Win to populate the name and QTH
 fields then. If Paul doesn't allow a specified delimiter ("," or "|"
>> or
 "in") then either Jim will modify one of his programs or I will
>> write a
 new one. I already have a program than could do this (To recognize a
 ","
 as well as "|" is a one line change) but it works with ADIF which
 doesn't preserve LotW status for example. I used it to transfer
>> DX4Win
 data to another logger I was testing (D4W was better). Jim's
>> programs
 work with DXQ which is preferable... so I'm hoping that he might
>> hack
 one of his programs if we ask him really nicely ;-)

 Mel...VE2DC

 David, K2DBK wrote:
> I'd been using ","  (such as   "David, River Vale") but I can live
 with
> it. I suppose the optimal solution would be to have the user
>> specify
 the
> delimiter, but if I really feel the need I can export my log,
>> massage
> the data, and re-import it. I'm just happy to have the new version
 out,
> and am anxiously awaiting my version 8 key. :-)
>
> Mel wrote:
>> Perhaps he could also delimit on "|"... I don't believe I am the
 only
>> one using this convention.
>>
>> re MFSK ... conversion to MFSK16 should be OK as I don't think
>> MFSK8
>> is used a lot not really an issue here as I can change the few
>> QSOS involved manually in less time than it took me to complain
 about
>> it ;-)
>>
>> I exported in DX4Win ver 6.03 format. I'll send you the file if
>> 

[Dx4win] Invalid value

[PY2YP]

I know that is not needed to import the DXL file from the version 7, 
just copy it to the SAVE directory and it is done, but... I exported the 
DXL file using the 7 version, opened the 8 version, created a brand new 
log file and imported the log from DXQ & DXN files. Using the version 7

I need 3 countries in 20 meters, say: P5, FT5W and KP1. The version 8.01 
said that I only need FT5 and KP1. I carefull checked the differences to 
find out that the "I" flag in the DXCC fields (Mixed, band and mode) 
were not flagged. Somehow, the importation procedure ignored the invalid 
value in the ValidDX field in the 7 version.

To be sure about that I did generate a report, using the 7 version, 
producing 51 invalid QSOs; none of them does appear in the version 8. Of 
course I can manually enter the "I" value in the proper fields, which I 
will do, but I think there is a little problem to be fixed.
-- 
73 DX de PY2YP - Cesar
__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] PSK31 Won't Key K3

[Bud Governale, W3LL]

Version 7.07.02

If both CW and Radio ports in DX4WIN Preferences are changed to None,
then PSK31 can be set to Com 5 (the K3 port) and it will key the K3.

However, this leaves no control of the radio (K3) and is not a viable solution.

It test just proves, I think, that DX4WIN is not allowing itself and PSK31 to 
use
the same radio port.

Does anybody have PSK31 working with the K3 radio?
If so, what am I doing wrong.
Help please from anybody.

73,

Bud W3LL
w...@arrl.net

 
- Original Message - 
From: "Bud Governale, W3LL" 
To: 
Sent: Saturday, August 08, 2009 11:54 AM
Subject: [Dx4win] PSK31 Won't Key K3


1. The radio is a K3. The DX4WIN radio selection in preferences is "Elecraft K3 
X4".

DX4WIN in radio preferences has Com 5 set for the radio. Both DTR and RTS 
are checked.

2. I unchecked DX4WIN Radio Preference DTR and RTS and selected PSK31 PTT 
control setting.
Still not keying the transmitter.

3. DX4WIN CW is set for COM 5, DTR Line CW Keying, RTS Line PTT Control.
This setting works for sending CW.

In PSK31 Settings I have keying line set to DTR and PTT set to PTT control.
No transmitter keying with this setup.

If I change PSK31 PTT to Com 5 I get the "device already open" error.
I think this produces a conflict with DX4WIN claiming Com 5 and PSK31 also 
trying to claim Com 5. This is just a guess 
by
me.

I still don't know how to key the K3 transmitter in PSK31.

Bud W3LL
w...@arrl.net




- Original Message - 
From: "ON4AOI" 
To: "'Bud Governale, W3LL'" 
Sent: Saturday, August 08, 2009 10:11 AM
Subject: RE: [Dx4win] PSK31 Won't Key K3


1 what radio do you have ?
If not needed uncheck DTR and RTS
Select ptt control in psk31 setting
Setup dx4win-cw via same port like radio is
With correct setting of keyline and ptt for dtr and rts

Guy


> -Oorspronkelijk bericht-
> Van: Bud Governale, W3LL [mailto:w...@arrl.net]
> Verzonden: zaterdag 8 augustus 2009 15:58
> Aan: ON4AOI
> Onderwerp: Re: [Dx4win] PSK31 Won't Key K3
>
> Guy,
>
> Thanks for the suggestion.
>
> The PSK31 com port was set on VOX. I changed it to the radio com port
> which is com 5.
>
> When I did this I get the following message:
>
> "An exception occurred device is already open".
>
> DX4WIN in radio preferences has Com 5 set for the radio. Both DTR and
> RTS are checked.
>
> I think we now have a conflict with DX4WIN claiming Com 5 and PSK31
> also trying to claim Com 5. This is just a guess by
> me.
>
> What do I do to fix this?
>
> 73,
>
> Bud W3LL
> w...@arrl.net
>
>
> - Original Message -
> From: "ON4AOI" 
> To: "'Bud Governale, W3LL'" 
> Cc: 
> Sent: Saturday, August 08, 2009 1:26 AM
> Subject: RE: [Dx4win] PSK31 Won't Key K3
>
>
> Make sure you set the correct comport for PSK31
> Right click in psk31 window next to the shortcuts
> and there you can change the settings
>
> Guy ON4AOI
>
> > -Oorspronkelijk bericht-
> > Van: dx4win-boun...@mailman.qth.net [mailto:dx4win-
> > boun...@mailman.qth.net] Namens Bud Governale, W3LL
> > Verzonden: zaterdag 8 augustus 2009 3:03
> > Aan: dx4win@mailman.qth.net
> > Onderwerp: [Dx4win] PSK31 Won't Key K3
> >
> > I'm trying to setup PSK31 using DX4WIN Version 7.07.02.
> >
> > When I hit the TX button I hear the tones but the K3 does not go into
> > transmit.
> >
> > DX4WIN works perfectly in both MMTTY and CW. It keys and sends in
> both
> > of those modes.
> >
> > What do I need to do to get DX4WIN PSK31 to key the K3?
> >
> > 73,
> >
> > Bud W3LL
> > w...@arrl.net
> >
> > __
> > Dx4win mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/dx4win
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:Dx4win@mailman.qth.net
> >
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
>




__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] DX4WIN.MAS2

[Jim Reisert AD1C]

Tony, those are instructions for the MAS1, or master callsign database.

John is asking about the MAS2 file, the list of "members" which is new
to DX4WIN 8.

It's not a typo.

73 - Jim AD1C

On Sat, Aug 8, 2009 at 12:45 PM, Tony McClenny wrote:
> John,
>
> Place the downloaded master file list into your DX4WIN folder.  Load DX4win
> and click on "Window" then "Master Calls".  Right click on the "Master
> Lookup" window and select "Convert".  The "Open" window will display your
> DX4win folder.  Select the file "MASTER.DTA" by double clicking on it and
> DX4win will open the file, convert it for use with DX4win and display
> another window, "Information", which will indicate "Conversion finished
> 44927 Calls".  The first time you enter a "Callsign" you will see the
> "MasterLookup" window display a list of similar callsigns.  Hope this helps
> you.
>
> - Tony, N3ME -
>
>
> -Original Message-
> From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
> On Behalf Of W9RPM
> Sent: Saturday, August 08, 2009 15:41 PM
> To: DX4WIN
> Subject: [Dx4win] DX4WIN.MAS2
>
> Hey, I am trying to ad this file, and I am not getting it to stick. I must
> be doing something dumb with it. I believe I am following the directions in
> the help file, but something isn't working. Thanks from Brain Dead here.  73
>
> John W9RPM
> EMAIL: j...@w9rpm.com
> WEBPAGE: http://www.w9rpm.com/
> DX and CONTEST CLUB: http://www.w9idx.com/
> AOL IM: W9RPM
> YAHOO: W9RPM


-- 
Jim Reisert AD1C, , http://www.ad1c.us
__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] DX cluster hookup?

[Jim Reisert AD1C]

On Sat, Aug 8, 2009 at 12:15 PM, N8NN wrote:

> Starting the cluster in DX4WIN is a chore that shouldn't have remained for so 
> many years.  Apparently the DX cluster facility in DX4WIN is a very low 
> priority.


Paul tried to do something shortly before 8.01 was released, but ran
into a programming issue he could not solve.

If you use the VE7CC user program between DX4WIN and your cluster
node, then you don't even have to type in the callsign when connecting
DX4WIN to the cluster.  Plus the VE7CC program will do auto-reconnect
if the connection is lost.

-- 
Jim Reisert AD1C, , http://www.ad1c.us
__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] PSK31 Won't Key K3

[Tony McClenny]

Bud,

If someone helps your or you finally master the problem, please share as I
am experiencing the same and cannot figure it out.  I have tried to
suggested software, which supposedly supports multiple software programs all
using the same COM port with no success thus far.  

Previously, (Kenwood 570D) I used a Rigblaster pro and that allowed
everything to work with a single COM port (CW, PSK, SSB and RTTY).  Thus far
I am making slow progress with K3 (wonderful radio).

- Tony , N3ME -

-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of Bud Governale, W3LL
Sent: Saturday, August 08, 2009 16:55 PM
To: dx4win@mailman.qth.net
Subject: [Dx4win] PSK31 Won't Key K3

1. The radio is a K3. The DX4WIN radio selection in preferences is "Elecraft
K3 X4".

DX4WIN in radio preferences has Com 5 set for the radio. Both DTR and
RTS are checked.

2. I unchecked DX4WIN Radio Preference DTR and RTS and selected PSK31 PTT
control setting.
Still not keying the transmitter.

3. DX4WIN CW is set for COM 5, DTR Line CW Keying, RTS Line PTT Control.
This setting works for sending CW.

In PSK31 Settings I have keying line set to DTR and PTT set to PTT control.
No transmitter keying with this setup.

If I change PSK31 PTT to Com 5 I get the "device already open" error.
I think this produces a conflict with DX4WIN claiming Com 5 and PSK31 also
trying to claim Com 5. This is just a guess 
by
me.

I still don't know how to key the K3 transmitter in PSK31.

Bud W3LL
w...@arrl.net




- Original Message - 
From: "ON4AOI" 
To: "'Bud Governale, W3LL'" 
Sent: Saturday, August 08, 2009 10:11 AM
Subject: RE: [Dx4win] PSK31 Won't Key K3


1 what radio do you have ?
If not needed uncheck DTR and RTS
Select ptt control in psk31 setting
Setup dx4win-cw via same port like radio is
With correct setting of keyline and ptt for dtr and rts

Guy


> -Oorspronkelijk bericht-
> Van: Bud Governale, W3LL [mailto:w...@arrl.net]
> Verzonden: zaterdag 8 augustus 2009 15:58
> Aan: ON4AOI
> Onderwerp: Re: [Dx4win] PSK31 Won't Key K3
>
> Guy,
>
> Thanks for the suggestion.
>
> The PSK31 com port was set on VOX. I changed it to the radio com port
> which is com 5.
>
> When I did this I get the following message:
>
> "An exception occurred device is already open".
>
> DX4WIN in radio preferences has Com 5 set for the radio. Both DTR and
> RTS are checked.
>
> I think we now have a conflict with DX4WIN claiming Com 5 and PSK31
> also trying to claim Com 5. This is just a guess by
> me.
>
> What do I do to fix this?
>
> 73,
>
> Bud W3LL
> w...@arrl.net
>
>
> - Original Message -
> From: "ON4AOI" 
> To: "'Bud Governale, W3LL'" 
> Cc: 
> Sent: Saturday, August 08, 2009 1:26 AM
> Subject: RE: [Dx4win] PSK31 Won't Key K3
>
>
> Make sure you set the correct comport for PSK31
> Right click in psk31 window next to the shortcuts
> and there you can change the settings
>
> Guy ON4AOI
>
> > -Oorspronkelijk bericht-
> > Van: dx4win-boun...@mailman.qth.net [mailto:dx4win-
> > boun...@mailman.qth.net] Namens Bud Governale, W3LL
> > Verzonden: zaterdag 8 augustus 2009 3:03
> > Aan: dx4win@mailman.qth.net
> > Onderwerp: [Dx4win] PSK31 Won't Key K3
> >
> > I'm trying to setup PSK31 using DX4WIN Version 7.07.02.
> >
> > When I hit the TX button I hear the tones but the K3 does not go into
> > transmit.
> >
> > DX4WIN works perfectly in both MMTTY and CW. It keys and sends in
> both
> > of those modes.
> >
> > What do I need to do to get DX4WIN PSK31 to key the K3?
> >
> > 73,
> >
> > Bud W3LL
> > w...@arrl.net
> >
> > __
> > Dx4win mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/dx4win
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:Dx4win@mailman.qth.net
> >
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
>




__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

No virus found in this incoming message.
Checked by AVG - www.avg.com 
Version: 8.5.406 / Virus Database: 270.13.47/2290 - Release Date: 08/08/09
06:10:00

__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Ver 8.01 issues

[Paul van der Eijk]

Mel (and others)

Or you can wait doing this until I come up with a smarter algorithm!

--Paul, KK4HD


Mel wrote:
> When you re-import you log into an empty file from a DXQ/DXN set... it
> should not double up...
>
> I tried Guy's solution also. I had been using | as a separator... but I
> also had many records with 3 fields... result was a 6 solid hours of
> "fixup"... not something I ever want to do again!
>
>
> Tonno Vahk wrote:
>   
>> It does not work this way Guy!
>>
>> I am also in trouble with the delimiter as I have used space between name
>> and QTH.
>>
>> I have been trying to find way to export the log to change the delimiter but
>> it is impossible with DXQ-QXN export-import because the Notes for This Call
>> gets doubled! Meaning the old values are not replaced whatever you do but
>> anything you import on top of them are added with "/".
>>
>> Even if you export your log, delete ALL QSOs after that and import all the
>> QSOs back then your Notes for This Call get multiplied by two with "/" in
>> between. Crazy.
>>
>> And it is not possible to open a new log file (thus getting rid of the old
>> Notes... data) and import all QSOs there because then you also lose all the
>> Groups list.
>>
>> Thus as far as I have no idea how do change delimiter automatically in ADIF
>> file with my domestic tools like excel etc I don't see any way to accomplish
>> this task without the program being modified to let the user choose the
>> delimiter, better yet logic similar to Excel Text to Columns.
>>
>> What I really need is to be able to split at the first space. As there are
>> often spaces in QTH description (like near Rome or alike).
>>
>> 73
>> Tonno
>> ES5TV
>>
>> -Original Message-
>> From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
>> On Behalf Of ON4AOI
>> Sent: Tuesday, August 04, 2009 6:27 PM
>> To: 'Mel'
>> Cc: dx4win@mailman.qth.net
>> Subject: Re: [Dx4win] Ver 8.01 issues
>>
>> Thats normally fixed in a few minutes
>> In version 7
>> Export your log >>> DX4WIN6
>> THE *.DXN file contains the name and qth, change the delimiter with textpad
>> or similar to IN
>> Save and import
>>
>> Guy ON4AOI
>>
>> 
>>> -Oorspronkelijk bericht-
>>> Van: Mel [mailto:ve...@videotron.ca]
>>> Verzonden: dinsdag 4 augustus 2009 17:18
>>> Aan: ON4AOI
>>> Onderwerp: Re: [Dx4win] Ver 8.01 issues
>>>
>>> very nice... but I have 25,000 QSOs not formatted that way Guy ;-)
>>>
>>> ON4AOI wrote:
>>>   
 Mel and others

 The delimiter in or IN works perfect

 So MEL IN STE-MARTINE works 100 %

 And will populate Name = MEL and QTH= STE-MARTINE

 When you do multiple QSO´s operations - Set Name and Qth

 Guy ON4AOI



 
> -Oorspronkelijk bericht-
> Van: dx4win-boun...@mailman.qth.net [mailto:dx4win-
> boun...@mailman.qth.net] Namens Mel
> Verzonden: dinsdag 4 augustus 2009 17:07
> Aan: David, K2DBK
> CC: DX4WIN
> Onderwerp: Re: [Dx4win] Ver 8.01 issues
>
> I would suggest that you not use DX4Win to populate the name and QTH
> fields then. If Paul doesn't allow a specified delimiter ("," or "|"
>   
>>> or
>>>   
> "in") then either Jim will modify one of his programs or I will
>   
>>> write a
>>>   
> new one. I already have a program than could do this (To recognize a
> ","
> as well as "|" is a one line change) but it works with ADIF which
> doesn't preserve LotW status for example. I used it to transfer
>   
>>> DX4Win
>>>   
> data to another logger I was testing (D4W was better). Jim's
>   
>>> programs
>>>   
> work with DXQ which is preferable... so I'm hoping that he might
>   
>>> hack
>>>   
> one of his programs if we ask him really nicely ;-)
>
> Mel...VE2DC
>
> David, K2DBK wrote:
>   
>> I'd been using ","  (such as   "David, River Vale") but I can live
>> 
> with
>   
>> it. I suppose the optimal solution would be to have the user
>> 
>>> specify
>>>   
> the
>   
>> delimiter, but if I really feel the need I can export my log,
>> 
>>> massage
>>>   
>> the data, and re-import it. I'm just happy to have the new version
>> 
> out,
>   
>> and am anxiously awaiting my version 8 key. :-)
>>
>> Mel wrote:
>> 
>>> Perhaps he could also delimit on "|"... I don't believe I am the
>>>   
> only
>   
>>> one using this convention.
>>>
>>> re MFSK ... conversion to MFSK16 should be OK as I don't think
>>>   
>>> MFSK8
>>>   
>>> is used a lot not really an issue here as I can change the few
>>> QSOS involved manually in less time than it took me to complain
>>>  

Re: [Dx4win] Use of F8 problem.

[Paul van der Eijk]

Milos,

I think (I'm guessing) that it has to do with the number notation.

When you start a filter, and do not want to enter a value for the
frequency, the field shows up as 0.0 and is therefore ignored. This also
means you cannot search for the value 0.0 either, but that is another
problem.

When your international setup is for the period as the separator, the F8
works fine. When it is a comma (in your case I guess) the 0,0 is not
seen as zero and becomes part of the search value(s) making the search fail.

Another thing todo!

--73, Paul, KK4HD


Ing. Miloš Prostecký wrote:
> After upgrading to 8.01 it is not possible to find new calls by F8 key which
> was add to log. What is wrong? All old contact are correct.
>
> 73, 
>
> Milos, OK1MP
>
> No virus found in this outgoing message.
> Checked by AVG - www.avg.com 
> Version: 8.5.406 / Virus Database: 270.13.47/2289 - Release Date: 08/07/09
> 18:37:00
>
> __
> Dx4win mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Dx4win@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> 
>
>
> No virus found in this incoming message.
> Checked by AVG - www.avg.com 
> Version: 8.5.392 / Virus Database: 270.13.47/2290 - Release Date: 08/08/09 
> 06:10:00
>
>   
__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Ver 8.01 issues

[Mel]

When you re-import you log into an empty file from a DXQ/DXN set... it
should not double up...

I tried Guy's solution also. I had been using | as a separator... but I
also had many records with 3 fields... result was a 6 solid hours of
"fixup"... not something I ever want to do again!


Tonno Vahk wrote:
> It does not work this way Guy!
> 
> I am also in trouble with the delimiter as I have used space between name
> and QTH.
> 
> I have been trying to find way to export the log to change the delimiter but
> it is impossible with DXQ-QXN export-import because the Notes for This Call
> gets doubled! Meaning the old values are not replaced whatever you do but
> anything you import on top of them are added with "/".
> 
> Even if you export your log, delete ALL QSOs after that and import all the
> QSOs back then your Notes for This Call get multiplied by two with "/" in
> between. Crazy.
> 
> And it is not possible to open a new log file (thus getting rid of the old
> Notes... data) and import all QSOs there because then you also lose all the
> Groups list.
> 
> Thus as far as I have no idea how do change delimiter automatically in ADIF
> file with my domestic tools like excel etc I don't see any way to accomplish
> this task without the program being modified to let the user choose the
> delimiter, better yet logic similar to Excel Text to Columns.
> 
> What I really need is to be able to split at the first space. As there are
> often spaces in QTH description (like near Rome or alike).
> 
> 73
> Tonno
> ES5TV
> 
> -Original Message-
> From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
> On Behalf Of ON4AOI
> Sent: Tuesday, August 04, 2009 6:27 PM
> To: 'Mel'
> Cc: dx4win@mailman.qth.net
> Subject: Re: [Dx4win] Ver 8.01 issues
> 
> Thats normally fixed in a few minutes
> In version 7
> Export your log >>> DX4WIN6
> THE *.DXN file contains the name and qth, change the delimiter with textpad
> or similar to IN
> Save and import
> 
> Guy ON4AOI
> 
>> -Oorspronkelijk bericht-
>> Van: Mel [mailto:ve...@videotron.ca]
>> Verzonden: dinsdag 4 augustus 2009 17:18
>> Aan: ON4AOI
>> Onderwerp: Re: [Dx4win] Ver 8.01 issues
>>
>> very nice... but I have 25,000 QSOs not formatted that way Guy ;-)
>>
>> ON4AOI wrote:
>>> Mel and others
>>>
>>> The delimiter in or IN works perfect
>>>
>>> So MEL IN STE-MARTINE works 100 %
>>>
>>> And will populate Name = MEL and QTH= STE-MARTINE
>>>
>>> When you do multiple QSO´s operations - Set Name and Qth
>>>
>>> Guy ON4AOI
>>>
>>>
>>>
 -Oorspronkelijk bericht-
 Van: dx4win-boun...@mailman.qth.net [mailto:dx4win-
 boun...@mailman.qth.net] Namens Mel
 Verzonden: dinsdag 4 augustus 2009 17:07
 Aan: David, K2DBK
 CC: DX4WIN
 Onderwerp: Re: [Dx4win] Ver 8.01 issues

 I would suggest that you not use DX4Win to populate the name and QTH
 fields then. If Paul doesn't allow a specified delimiter ("," or "|"
>> or
 "in") then either Jim will modify one of his programs or I will
>> write a
 new one. I already have a program than could do this (To recognize a
 ","
 as well as "|" is a one line change) but it works with ADIF which
 doesn't preserve LotW status for example. I used it to transfer
>> DX4Win
 data to another logger I was testing (D4W was better). Jim's
>> programs
 work with DXQ which is preferable... so I'm hoping that he might
>> hack
 one of his programs if we ask him really nicely ;-)

 Mel...VE2DC

 David, K2DBK wrote:
> I'd been using ","  (such as   "David, River Vale") but I can live
 with
> it. I suppose the optimal solution would be to have the user
>> specify
 the
> delimiter, but if I really feel the need I can export my log,
>> massage
> the data, and re-import it. I'm just happy to have the new version
 out,
> and am anxiously awaiting my version 8 key. :-)
>
> Mel wrote:
>> Perhaps he could also delimit on "|"... I don't believe I am the
 only
>> one using this convention.
>>
>> re MFSK ... conversion to MFSK16 should be OK as I don't think
>> MFSK8
>> is used a lot not really an issue here as I can change the few
>> QSOS involved manually in less time than it took me to complain
 about
>> it ;-)
>>
>> I exported in DX4Win ver 6.03 format. I'll send you the file if
>> you
>> like Jim.
>>
>> Maybe you could make your program QSX & Name fix... I already
>> wrote
 a
>> program to do this and it works fine... but it works on the ADIF
 file.
>> If I export/import ADIF I will lose information.
>>
>> I will send file direct.
>>
>> Jim Reisert AD1C wrote:
>>
>>> Regarding name, etc.
>>>
>>> If you read the on-line help, you'll see that DX4WIN looks for:
>>>
>>>in 
>>>
>>> MFSK is not a real mode.  Neither is PSK.  PSK was removed from
 this
>>> release, QSOs should automa

Re: [Dx4win] Use of F8 problem.

[Mel]

??? F8 works fine with the new version. There is no difference between a 
"new" QSO and an "old" QSO. Did you open the correct file?

Ing. Miloš Prostecký wrote:
> After upgrading to 8.01 it is not possible to find new calls by F8 key which
> was add to log. What is wrong? All old contact are correct.
> 
> 73, 
> 
> Milos, OK1MP
> 
> No virus found in this outgoing message.
> Checked by AVG - www.avg.com 
> Version: 8.5.406 / Virus Database: 270.13.47/2289 - Release Date: 08/07/09
> 18:37:00
> 
> __
> Dx4win mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Dx4win@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> 
__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] Use of F8 problem.

[Ing . Miloš Prostecký]

After upgrading to 8.01 it is not possible to find new calls by F8 key which
was add to log. What is wrong? All old contact are correct.

73, 

Milos, OK1MP

No virus found in this outgoing message.
Checked by AVG - www.avg.com 
Version: 8.5.406 / Virus Database: 270.13.47/2289 - Release Date: 08/07/09
18:37:00

__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] DX4WIN.MAS2

[Tony McClenny]

John,

Place the downloaded master file list into your DX4WIN folder.  Load DX4win
and click on "Window" then "Master Calls".  Right click on the "Master
Lookup" window and select "Convert".  The "Open" window will display your
DX4win folder.  Select the file "MASTER.DTA" by double clicking on it and
DX4win will open the file, convert it for use with DX4win and display
another window, "Information", which will indicate "Conversion finished
44927 Calls".  The first time you enter a "Callsign" you will see the
"MasterLookup" window display a list of similar callsigns.  Hope this helps
you.

- Tony, N3ME -


-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of W9RPM
Sent: Saturday, August 08, 2009 15:41 PM
To: DX4WIN
Subject: [Dx4win] DX4WIN.MAS2

Hey, I am trying to ad this file, and I am not getting it to stick. I must 
be doing something dumb with it. I believe I am following the directions in 
the help file, but something isn't working. Thanks from Brain Dead here.  73

John W9RPM
EMAIL: j...@w9rpm.com
WEBPAGE: http://www.w9rpm.com/
DX and CONTEST CLUB: http://www.w9idx.com/
AOL IM: W9RPM
YAHOO: W9RPM


__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

No virus found in this incoming message.
Checked by AVG - www.avg.com 
Version: 8.5.406 / Virus Database: 270.13.47/2290 - Release Date: 08/08/09
06:10:00

__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] DX cluster hookup?

[Dave Sharred]

Here Here Mel !

There are many features that if you analysed it you could do with "just a
few mouse clicks"; and they all add up.

- rig control / mode selection - is a nice to have in a logging programme;
but we accept that the user is not lazy for wanting it (I bet someone used
Erkki's argument 15 years ago !

- Rotator control
- entering time automatically

What about in DX4WIN "operator preferences" - they save you having to
configure the programme every time you use it; for your laziness!

We accept these niceties; and the same should be true of other features that
would enhance the programme!

In Win Test, which was the example I used, the choice of which cluster to
use etc is still down to the user; it is merely anther preference that he
sets up.


I think about it as "operator convenience"; rather than laziness. I have
enough things to do with my PC before I want to operate!

73

Dave
G3NKC


-Original Message-
From: Mel [mailto:ve...@videotron.ca]
Sent: 08 August 2009 20:08
To: Erkki Heikkinen
Cc: 'N8NN'; 'Dave Sharred'; 'Jim Reisert AD1C'; 'Dennis Petrich';
'DX4WIN'
Subject: Re: [Dx4win] DX cluster hookup?


Oh for crying out loud! It's NOT a lot of work to connect. But after you
have done it many thousands of times it DOES get irritating.

Every other logging program I have used takes care of this little
detail... why can't DX4Win?

It's not something that needs to be done right now... but it is a small
detail that Paul should look at... and I suspect its somewhere on his list.

Erkki Heikkinen wrote:
> Hmmm,
>
> It takes three clicks with the mouse to connect to your favorite
> cluster.
>
> I cannot see any big human energy savings if it is done automatically.
> And then it will be much more difficult to choose another cluster.
>
> I am lazy, too, but not THAT lazy.
>
> 73 Erkki OH2BF
>
>

__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Ver 8.01 issues

[Tonno Vahk]

It does not work this way Guy!

I am also in trouble with the delimiter as I have used space between name
and QTH.

I have been trying to find way to export the log to change the delimiter but
it is impossible with DXQ-QXN export-import because the Notes for This Call
gets doubled! Meaning the old values are not replaced whatever you do but
anything you import on top of them are added with "/".

Even if you export your log, delete ALL QSOs after that and import all the
QSOs back then your Notes for This Call get multiplied by two with "/" in
between. Crazy.

And it is not possible to open a new log file (thus getting rid of the old
Notes... data) and import all QSOs there because then you also lose all the
Groups list.

Thus as far as I have no idea how do change delimiter automatically in ADIF
file with my domestic tools like excel etc I don't see any way to accomplish
this task without the program being modified to let the user choose the
delimiter, better yet logic similar to Excel Text to Columns.

What I really need is to be able to split at the first space. As there are
often spaces in QTH description (like near Rome or alike).

73
Tonno
ES5TV

-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of ON4AOI
Sent: Tuesday, August 04, 2009 6:27 PM
To: 'Mel'
Cc: dx4win@mailman.qth.net
Subject: Re: [Dx4win] Ver 8.01 issues

Thats normally fixed in a few minutes
In version 7
Export your log >>> DX4WIN6
THE *.DXN file contains the name and qth, change the delimiter with textpad
or similar to IN
Save and import

Guy ON4AOI

> -Oorspronkelijk bericht-
> Van: Mel [mailto:ve...@videotron.ca]
> Verzonden: dinsdag 4 augustus 2009 17:18
> Aan: ON4AOI
> Onderwerp: Re: [Dx4win] Ver 8.01 issues
> 
> very nice... but I have 25,000 QSOs not formatted that way Guy ;-)
> 
> ON4AOI wrote:
> > Mel and others
> >
> > The delimiter in or IN works perfect
> >
> > So MEL IN STE-MARTINE works 100 %
> >
> > And will populate Name = MEL and QTH= STE-MARTINE
> >
> > When you do multiple QSO´s operations - Set Name and Qth
> >
> > Guy ON4AOI
> >
> >
> >
> >> -Oorspronkelijk bericht-
> >> Van: dx4win-boun...@mailman.qth.net [mailto:dx4win-
> >> boun...@mailman.qth.net] Namens Mel
> >> Verzonden: dinsdag 4 augustus 2009 17:07
> >> Aan: David, K2DBK
> >> CC: DX4WIN
> >> Onderwerp: Re: [Dx4win] Ver 8.01 issues
> >>
> >> I would suggest that you not use DX4Win to populate the name and QTH
> >> fields then. If Paul doesn't allow a specified delimiter ("," or "|"
> or
> >> "in") then either Jim will modify one of his programs or I will
> write a
> >> new one. I already have a program than could do this (To recognize a
> >> ","
> >> as well as "|" is a one line change) but it works with ADIF which
> >> doesn't preserve LotW status for example. I used it to transfer
> DX4Win
> >> data to another logger I was testing (D4W was better). Jim's
> programs
> >> work with DXQ which is preferable... so I'm hoping that he might
> hack
> >> one of his programs if we ask him really nicely ;-)
> >>
> >> Mel...VE2DC
> >>
> >> David, K2DBK wrote:
> >>> I'd been using ","  (such as   "David, River Vale") but I can live
> >> with
> >>> it. I suppose the optimal solution would be to have the user
> specify
> >> the
> >>> delimiter, but if I really feel the need I can export my log,
> massage
> >>> the data, and re-import it. I'm just happy to have the new version
> >> out,
> >>> and am anxiously awaiting my version 8 key. :-)
> >>>
> >>> Mel wrote:
>  Perhaps he could also delimit on "|"... I don't believe I am the
> >> only
>  one using this convention.
> 
>  re MFSK ... conversion to MFSK16 should be OK as I don't think
> MFSK8
>  is used a lot not really an issue here as I can change the few
>  QSOS involved manually in less time than it took me to complain
> >> about
>  it ;-)
> 
>  I exported in DX4Win ver 6.03 format. I'll send you the file if
> you
>  like Jim.
> 
>  Maybe you could make your program QSX & Name fix... I already
> wrote
> >> a
>  program to do this and it works fine... but it works on the ADIF
> >> file.
>  If I export/import ADIF I will lose information.
> 
>  I will send file direct.
> 
>  Jim Reisert AD1C wrote:
> 
> > Regarding name, etc.
> >
> > If you read the on-line help, you'll see that DX4WIN looks for:
> >
> >in 
> >
> > MFSK is not a real mode.  Neither is PSK.  PSK was removed from
> >> this
> > release, QSOs should automatically convert to PSK31.
> >
> >
> >> For QSOs where the Frequency string was "Frequency=N,NNNKHz) the
> >> "Frequency=" was left in the notes field instead of being
> >> supressed.
> > Since that's from an import, Paul can (hopefully) fix this.  I
> can
> > modify my "qsxfix" program to deal with this.
> >
> > I'm curious about the Satellite QSOs.  What export/import format
> >> di

Re: [Dx4win] DX cluster hookup?

[Mel]

Oh for crying out loud! It's NOT a lot of work to connect. But after you 
have done it many thousands of times it DOES get irritating.

Every other logging program I have used takes care of this little 
detail... why can't DX4Win?

It's not something that needs to be done right now... but it is a small 
detail that Paul should look at... and I suspect its somewhere on his list.

Erkki Heikkinen wrote:
> Hmmm,
> 
> It takes three clicks with the mouse to connect to your favorite
> cluster.
> 
> I cannot see any big human energy savings if it is done automatically.
> And then it will be much more difficult to choose another cluster.
> 
> I am lazy, too, but not THAT lazy.
> 
> 73 Erkki OH2BF
> 
> 
>> -Alkuperäinen viesti-
>> Lähettäjä: dx4win-boun...@mailman.qth.net 
>> [mailto:dx4win-boun...@mailman.qth.net] Puolesta N8NN
>> Lähetetty: 8. elokuuta 2009 21:16
>> Vastaanottaja: Dave Sharred; Jim Reisert AD1C; Dennis Petrich
>> Kopio: DX4WIN
>> Aihe: Re: [Dx4win] DX cluster hookup?
>>
>>
>> I raised this issue several years ago and got a nasty 
>> rejection from the DX4WIN email support.  Soured me on DX4WIN 
>> for years.  In my opinion it is programming not worthy of a 
>> commercial product.  The BandMap and moving the last used 
>> cluster to the top of the list are improvements.  Starting 
>> the cluster in DX4WIN is a chore that shouldn't have remained 
>> for so many years.  Apparently the DX cluster facility in 
>> DX4WIN is a very low priority.
>>
>> There are free DX Cluster programs available with more 
>> features and a better interface.  And yes, I do use other 
>> programs for the DX Cluster.
>>
>> Bert N8NN
>>
>> -Original Message-
>>> From: Dave Sharred 
>>> Sent: Aug 8, 2009 1:48 PM
>>> To: Jim Reisert AD1C , Dennis Petrich 
>>> 
>>> Cc: DX4WIN 
>>> Subject: Re: [Dx4win] DX cluster hookup?
>>>
>>> Hi Dennis, Jim & all;
>>>
>>> I raised this point a while ago (again!!); and am happily 
>> hooked up top 
>>> AR Cluster, which I have configured to my home node.
>>>
>>> I still think that this is too many key strokes and ops; and 
>> my opinion 
>>> is still that it should be automated, just like running Win Test.  
>>> Here; once set up, it can be forgotten about; it just runs 
>> in a Telnet 
>>> window.
>>>
>>> Mine is just an opinion, I am not the software writer; guess I know 
>>> what I like and what I find a bit of a drag...
>>>
>>> Still to get round to updating to V8; been very busy, so am happy to 
>>> let the dust settle for the moment. and then jump in..
>>>
>>> 73
>>>
>>> Dave
>>> G3NKC
>>>
>>>
>>> -Original Message-
>>> From: dx4win-boun...@mailman.qth.net 
>>> [mailto:dx4win-boun...@mailman.qth.net]on Behalf Of Jim Reisert AD1C
>>> Sent: 08 August 2009 16:17
>>> To: Dennis Petrich
>>> Cc: DX4WIN
>>> Subject: Re: [Dx4win] DX cluster hookup?
>>>
>>>
>>> In 8.01, whatever node you select gets moved to the top of 
>> the list for 
>>> next time.
>>>
>>> There is no way to do an automatic connect.  You still have to enter 
>>> your call.  Please see the section called "Tips" here:
>>>
>>> http://dx4win.ad1c.us/cluster/index.htm#tips
>>>
>>> 73 - Jim AD1C
>>>
>>> On 8/8/2009 9:01 AM, Dennis Petrich wrote:
 Hello all,

 This questions is regarding automatic hookup to a DX 
>> cluster like AR 
 User
>>> by
 VE7CC?  Right now when I bring up dx4win I have to click 
>> the connect
>>> button
 at the bottom of some window and then select which dx 
>> cluster I want 
 to
>>> look
 at from a very long list and then enter my call, hit enter 
>> then click 
 on SH/DX to see the DX.  dx4win knows my call sign, my 
>> name, my qth, 
 I can
>>> tell
 it what cluster I want, but maybe it already do this and I 
>> just don't 
 know how to use this feature??

 So is there an automatic way to just bring up dx4win and have it 
 automatically connect to VE7CC ( or what ever dx cluster I 
>> previously 
 select)??

 Thanks in advance for any help.

 Dennis, k0eoo
>>> --
>>> Jim Reisert AD1C, , http://www.ad1c.us 
>>> __
>>> Dx4win mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/dx4win
>>> Help: http://mailman.qth.net/mmfaq.htm
>>> Post: mailto:Dx4win@mailman.qth.net
>>>
>>> This list hosted by: http://www.qsl.net
>>> Please help support this email list: http://www.qsl.net/donate.html
>>>
>>> __
>>> Dx4win mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/dx4win
>>> Help: http://mailman.qth.net/mmfaq.htm
>>> Post: mailto:Dx4win@mailman.qth.net
>>>
>>> This list hosted by: http://www.qsl.net
>>> Please help support this email list: http://www.qsl.net/donate.html
>> __
>> Dx4win mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/dx4win
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mai

Re: [Dx4win] DX cluster hookup?

[ON4AOI]

Erkki you can spare some energy when you use both hands  ..
click with left hand in packetscreen and enter enter with right hand

Guy
 

> -Oorspronkelijk bericht-
> Van: dx4win-boun...@mailman.qth.net [mailto:dx4win-
> boun...@mailman.qth.net] Namens Erkki Heikkinen
> Verzonden: zaterdag 8 augustus 2009 20:31
> Aan: 'N8NN'; 'Dave Sharred'; 'Jim Reisert AD1C'; 'Dennis Petrich'
> CC: 'DX4WIN'
> Onderwerp: Re: [Dx4win] DX cluster hookup?
> 
> Hmmm,
> 
> It takes three clicks with the mouse to connect to your favorite
> cluster.
> 
> I cannot see any big human energy savings if it is done automatically.
> And then it will be much more difficult to choose another cluster.
> 
> I am lazy, too, but not THAT lazy.
> 
> 73 Erkki OH2BF
> 
> 
> > -Alkuperäinen viesti-
> > Lähettäjä: dx4win-boun...@mailman.qth.net
> > [mailto:dx4win-boun...@mailman.qth.net] Puolesta N8NN
> > Lähetetty: 8. elokuuta 2009 21:16
> > Vastaanottaja: Dave Sharred; Jim Reisert AD1C; Dennis Petrich
> > Kopio: DX4WIN
> > Aihe: Re: [Dx4win] DX cluster hookup?
> >
> >
> > I raised this issue several years ago and got a nasty
> > rejection from the DX4WIN email support.  Soured me on DX4WIN
> > for years.  In my opinion it is programming not worthy of a
> > commercial product.  The BandMap and moving the last used
> > cluster to the top of the list are improvements.  Starting
> > the cluster in DX4WIN is a chore that shouldn't have remained
> > for so many years.  Apparently the DX cluster facility in
> > DX4WIN is a very low priority.
> >
> > There are free DX Cluster programs available with more
> > features and a better interface.  And yes, I do use other
> > programs for the DX Cluster.
> >
> > Bert N8NN
> >
> > -Original Message-
> > >From: Dave Sharred 
> > >Sent: Aug 8, 2009 1:48 PM
> > >To: Jim Reisert AD1C , Dennis Petrich
> > >
> > >Cc: DX4WIN 
> > >Subject: Re: [Dx4win] DX cluster hookup?
> > >
> > >Hi Dennis, Jim & all;
> > >
> > >I raised this point a while ago (again!!); and am happily
> > hooked up top
> > >AR Cluster, which I have configured to my home node.
> > >
> > >I still think that this is too many key strokes and ops; and
> > my opinion
> > >is still that it should be automated, just like running Win Test.
> > >Here; once set up, it can be forgotten about; it just runs
> > in a Telnet
> > >window.
> > >
> > >Mine is just an opinion, I am not the software writer; guess I know
> > >what I like and what I find a bit of a drag...
> > >
> > >Still to get round to updating to V8; been very busy, so am happy to
> > >let the dust settle for the moment. and then jump in..
> > >
> > >73
> > >
> > >Dave
> > >G3NKC
> > >
> > >
> > >-Original Message-
> > >From: dx4win-boun...@mailman.qth.net
> > >[mailto:dx4win-boun...@mailman.qth.net]on Behalf Of Jim Reisert AD1C
> > >Sent: 08 August 2009 16:17
> > >To: Dennis Petrich
> > >Cc: DX4WIN
> > >Subject: Re: [Dx4win] DX cluster hookup?
> > >
> > >
> > >In 8.01, whatever node you select gets moved to the top of
> > the list for
> > >next time.
> > >
> > >There is no way to do an automatic connect.  You still have to enter
> > >your call.  Please see the section called "Tips" here:
> > >
> > > http://dx4win.ad1c.us/cluster/index.htm#tips
> > >
> > >73 - Jim AD1C
> > >
> > >On 8/8/2009 9:01 AM, Dennis Petrich wrote:
> > >> Hello all,
> > >>
> > >> This questions is regarding automatic hookup to a DX
> > cluster like AR
> > >> User
> > >by
> > >> VE7CC?  Right now when I bring up dx4win I have to click
> > the connect
> > >button
> > >> at the bottom of some window and then select which dx
> > cluster I want
> > >> to
> > >look
> > >> at from a very long list and then enter my call, hit enter
> > then click
> > >> on SH/DX to see the DX.  dx4win knows my call sign, my
> > name, my qth,
> > >> I can
> > >tell
> > >> it what cluster I want, but maybe it already do this and I
> > just don't
> > >> know how to use this feature??
> > >>
> > >> So is there an automatic way to just bring up dx4win and have it
> > >> automatically connect to VE7CC ( or what ever dx cluster I
> > previously
> > >> select)??
> > >>
> > >> Thanks in advance for any help.
> > >>
> > >> Dennis, k0eoo
> > >
> > >--
> > >Jim Reisert AD1C, , http://www.ad1c.us
> > >__
> > >Dx4win mailing list
> > >Home: http://mailman.qth.net/mailman/listinfo/dx4win
> > >Help: http://mailman.qth.net/mmfaq.htm
> > >Post: mailto:Dx4win@mailman.qth.net
> > >
> > >This list hosted by: http://www.qsl.net
> > >Please help support this email list: http://www.qsl.net/donate.html
> > >
> > >__
> > >Dx4win mailing list
> > >Home: http://mailman.qth.net/mailman/listinfo/dx4win
> > >Help: http://mailman.qth.net/mmfaq.htm
> > >Post: mailto:Dx4win@mailman.qth.net
> > >
> > >This list hosted by: http://www.qsl.net
> > >Please help support this email list: http://www.qsl.net/donate.html
> >
> > 

Re: [Dx4win] DX cluster hookup?

[Erkki Heikkinen]

Hmmm,

It takes three clicks with the mouse to connect to your favorite
cluster.

I cannot see any big human energy savings if it is done automatically.
And then it will be much more difficult to choose another cluster.

I am lazy, too, but not THAT lazy.

73 Erkki OH2BF


> -Alkuperäinen viesti-
> Lähettäjä: dx4win-boun...@mailman.qth.net 
> [mailto:dx4win-boun...@mailman.qth.net] Puolesta N8NN
> Lähetetty: 8. elokuuta 2009 21:16
> Vastaanottaja: Dave Sharred; Jim Reisert AD1C; Dennis Petrich
> Kopio: DX4WIN
> Aihe: Re: [Dx4win] DX cluster hookup?
> 
> 
> I raised this issue several years ago and got a nasty 
> rejection from the DX4WIN email support.  Soured me on DX4WIN 
> for years.  In my opinion it is programming not worthy of a 
> commercial product.  The BandMap and moving the last used 
> cluster to the top of the list are improvements.  Starting 
> the cluster in DX4WIN is a chore that shouldn't have remained 
> for so many years.  Apparently the DX cluster facility in 
> DX4WIN is a very low priority.
> 
> There are free DX Cluster programs available with more 
> features and a better interface.  And yes, I do use other 
> programs for the DX Cluster.
> 
> Bert N8NN
> 
> -Original Message-
> >From: Dave Sharred 
> >Sent: Aug 8, 2009 1:48 PM
> >To: Jim Reisert AD1C , Dennis Petrich 
> >
> >Cc: DX4WIN 
> >Subject: Re: [Dx4win] DX cluster hookup?
> >
> >Hi Dennis, Jim & all;
> >
> >I raised this point a while ago (again!!); and am happily 
> hooked up top 
> >AR Cluster, which I have configured to my home node.
> >
> >I still think that this is too many key strokes and ops; and 
> my opinion 
> >is still that it should be automated, just like running Win Test.  
> >Here; once set up, it can be forgotten about; it just runs 
> in a Telnet 
> >window.
> >
> >Mine is just an opinion, I am not the software writer; guess I know 
> >what I like and what I find a bit of a drag...
> >
> >Still to get round to updating to V8; been very busy, so am happy to 
> >let the dust settle for the moment. and then jump in..
> >
> >73
> >
> >Dave
> >G3NKC
> >
> >
> >-Original Message-
> >From: dx4win-boun...@mailman.qth.net 
> >[mailto:dx4win-boun...@mailman.qth.net]on Behalf Of Jim Reisert AD1C
> >Sent: 08 August 2009 16:17
> >To: Dennis Petrich
> >Cc: DX4WIN
> >Subject: Re: [Dx4win] DX cluster hookup?
> >
> >
> >In 8.01, whatever node you select gets moved to the top of 
> the list for 
> >next time.
> >
> >There is no way to do an automatic connect.  You still have to enter 
> >your call.  Please see the section called "Tips" here:
> >
> > http://dx4win.ad1c.us/cluster/index.htm#tips
> >
> >73 - Jim AD1C
> >
> >On 8/8/2009 9:01 AM, Dennis Petrich wrote:
> >> Hello all,
> >>
> >> This questions is regarding automatic hookup to a DX 
> cluster like AR 
> >> User
> >by
> >> VE7CC?  Right now when I bring up dx4win I have to click 
> the connect
> >button
> >> at the bottom of some window and then select which dx 
> cluster I want 
> >> to
> >look
> >> at from a very long list and then enter my call, hit enter 
> then click 
> >> on SH/DX to see the DX.  dx4win knows my call sign, my 
> name, my qth, 
> >> I can
> >tell
> >> it what cluster I want, but maybe it already do this and I 
> just don't 
> >> know how to use this feature??
> >>
> >> So is there an automatic way to just bring up dx4win and have it 
> >> automatically connect to VE7CC ( or what ever dx cluster I 
> previously 
> >> select)??
> >>
> >> Thanks in advance for any help.
> >>
> >> Dennis, k0eoo
> >
> >--
> >Jim Reisert AD1C, , http://www.ad1c.us 
> >__
> >Dx4win mailing list
> >Home: http://mailman.qth.net/mailman/listinfo/dx4win
> >Help: http://mailman.qth.net/mmfaq.htm
> >Post: mailto:Dx4win@mailman.qth.net
> >
> >This list hosted by: http://www.qsl.net
> >Please help support this email list: http://www.qsl.net/donate.html
> >
> >__
> >Dx4win mailing list
> >Home: http://mailman.qth.net/mailman/listinfo/dx4win
> >Help: http://mailman.qth.net/mmfaq.htm
> >Post: mailto:Dx4win@mailman.qth.net
> >
> >This list hosted by: http://www.qsl.net
> >Please help support this email list: http://www.qsl.net/donate.html
> 
> __
> Dx4win mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Dx4win@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> 

__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] DX cluster hookup?

[N8NN]

I raised this issue several years ago and got a nasty rejection from the DX4WIN 
email support.  Soured me on DX4WIN for years.  In my opinion it is programming 
not worthy of a commercial product.  The BandMap and moving the last used 
cluster to the top of the list are improvements.  Starting the cluster in 
DX4WIN is a chore that shouldn't have remained for so many years.  Apparently 
the DX cluster facility in DX4WIN is a very low priority.

There are free DX Cluster programs available with more features and a better 
interface.  And yes, I do use other programs for the DX Cluster.

Bert N8NN

-Original Message-
>From: Dave Sharred 
>Sent: Aug 8, 2009 1:48 PM
>To: Jim Reisert AD1C , Dennis Petrich 
>
>Cc: DX4WIN 
>Subject: Re: [Dx4win] DX cluster hookup?
>
>Hi Dennis, Jim & all;
>
>I raised this point a while ago (again!!); and am happily hooked up top AR
>Cluster, which I have configured to my home node.
>
>I still think that this is too many key strokes and ops; and my opinion is
>still that it should be automated, just like running Win Test.  Here; once
>set up, it can be forgotten about; it just runs in a Telnet window.
>
>Mine is just an opinion, I am not the software writer; guess I know what I
>like and what I find a bit of a drag...
>
>Still to get round to updating to V8; been very busy, so am happy to let the
>dust settle for the moment. and then jump in..
>
>73
>
>Dave
>G3NKC
>
>
>-Original Message-
>From: dx4win-boun...@mailman.qth.net
>[mailto:dx4win-boun...@mailman.qth.net]on Behalf Of Jim Reisert AD1C
>Sent: 08 August 2009 16:17
>To: Dennis Petrich
>Cc: DX4WIN
>Subject: Re: [Dx4win] DX cluster hookup?
>
>
>In 8.01, whatever node you select gets moved to the top of the list for
>next time.
>
>There is no way to do an automatic connect.  You still have to enter
>your call.  Please see the section called "Tips" here:
>
> http://dx4win.ad1c.us/cluster/index.htm#tips
>
>73 - Jim AD1C
>
>On 8/8/2009 9:01 AM, Dennis Petrich wrote:
>> Hello all,
>>
>> This questions is regarding automatic hookup to a DX cluster like AR User
>by
>> VE7CC?  Right now when I bring up dx4win I have to click the connect
>button
>> at the bottom of some window and then select which dx cluster I want to
>look
>> at from a very long list and then enter my call, hit enter then click on
>> SH/DX to see the DX.  dx4win knows my call sign, my name, my qth, I can
>tell
>> it what cluster I want, but maybe it already do this and I just don't know
>> how to use this feature??
>>
>> So is there an automatic way to just bring up dx4win and have it
>> automatically connect to VE7CC ( or what ever dx cluster I previously
>> select)??
>>
>> Thanks in advance for any help.
>>
>> Dennis, k0eoo
>
>--
>Jim Reisert AD1C, , http://www.ad1c.us
>__
>Dx4win mailing list
>Home: http://mailman.qth.net/mailman/listinfo/dx4win
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:Dx4win@mailman.qth.net
>
>This list hosted by: http://www.qsl.net
>Please help support this email list: http://www.qsl.net/donate.html
>
>__
>Dx4win mailing list
>Home: http://mailman.qth.net/mailman/listinfo/dx4win
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:Dx4win@mailman.qth.net
>
>This list hosted by: http://www.qsl.net
>Please help support this email list: http://www.qsl.net/donate.html

__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] DX cluster hookup?

[Dave Sharred]

Hi Dennis, Jim & all;

I raised this point a while ago (again!!); and am happily hooked up top AR
Cluster, which I have configured to my home node.

I still think that this is too many key strokes and ops; and my opinion is
still that it should be automated, just like running Win Test.  Here; once
set up, it can be forgotten about; it just runs in a Telnet window.

Mine is just an opinion, I am not the software writer; guess I know what I
like and what I find a bit of a drag...

Still to get round to updating to V8; been very busy, so am happy to let the
dust settle for the moment. and then jump in..

73

Dave
G3NKC


-Original Message-
From: dx4win-boun...@mailman.qth.net
[mailto:dx4win-boun...@mailman.qth.net]on Behalf Of Jim Reisert AD1C
Sent: 08 August 2009 16:17
To: Dennis Petrich
Cc: DX4WIN
Subject: Re: [Dx4win] DX cluster hookup?


In 8.01, whatever node you select gets moved to the top of the list for
next time.

There is no way to do an automatic connect.  You still have to enter
your call.  Please see the section called "Tips" here:

 http://dx4win.ad1c.us/cluster/index.htm#tips

73 - Jim AD1C

On 8/8/2009 9:01 AM, Dennis Petrich wrote:
> Hello all,
>
> This questions is regarding automatic hookup to a DX cluster like AR User
by
> VE7CC?  Right now when I bring up dx4win I have to click the connect
button
> at the bottom of some window and then select which dx cluster I want to
look
> at from a very long list and then enter my call, hit enter then click on
> SH/DX to see the DX.  dx4win knows my call sign, my name, my qth, I can
tell
> it what cluster I want, but maybe it already do this and I just don't know
> how to use this feature??
>
> So is there an automatic way to just bring up dx4win and have it
> automatically connect to VE7CC ( or what ever dx cluster I previously
> select)??
>
> Thanks in advance for any help.
>
> Dennis, k0eoo

--
Jim Reisert AD1C, , http://www.ad1c.us
__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Bandmap radio frequency update speed v8.01

[Art - W6KY]

The radio shouldn't have anything to do with the updating of the bandmap. 
It all comes from the cluster connection.
I have a PC in my office, no radio, bandmap works fine. Keeps me
updated on that pesky DX!
73, Art  W6KY



- Original Message 
From: Olli Tuppurainen 
To: dx4win@mailman.qth.net
Sent: Saturday, August 8, 2009 5:50:34 AM
Subject: [Dx4win] Bandmap radio frequency update speed  v8.01

Any solution to speed up the bandmap ? 

I am Using IC-756PROIII with 19200bd and com port poll rate 1ms with
microham microkeyer. Bandmap seems to be quite slow compared to ones I am
used to ( win-test and N1MM )

Otherwise this bandmap is excellent update for DX4WIN, very readable and
informative with colour coding 

B.R

Olli
OH6CT


__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] PSK31 Won't Key K3

[Bud Governale, W3LL]

1. The radio is a K3. The DX4WIN radio selection in preferences is "Elecraft K3 
X4".

DX4WIN in radio preferences has Com 5 set for the radio. Both DTR and RTS 
are checked.

2. I unchecked DX4WIN Radio Preference DTR and RTS and selected PSK31 PTT 
control setting.
Still not keying the transmitter.

3. DX4WIN CW is set for COM 5, DTR Line CW Keying, RTS Line PTT Control.
This setting works for sending CW.

In PSK31 Settings I have keying line set to DTR and PTT set to PTT control.
No transmitter keying with this setup.

If I change PSK31 PTT to Com 5 I get the "device already open" error.
I think this produces a conflict with DX4WIN claiming Com 5 and PSK31 also 
trying to claim Com 5. This is just a guess 
by
me.

I still don't know how to key the K3 transmitter in PSK31.

Bud W3LL
w...@arrl.net




- Original Message - 
From: "ON4AOI" 
To: "'Bud Governale, W3LL'" 
Sent: Saturday, August 08, 2009 10:11 AM
Subject: RE: [Dx4win] PSK31 Won't Key K3


1 what radio do you have ?
If not needed uncheck DTR and RTS
Select ptt control in psk31 setting
Setup dx4win-cw via same port like radio is
With correct setting of keyline and ptt for dtr and rts

Guy


> -Oorspronkelijk bericht-
> Van: Bud Governale, W3LL [mailto:w...@arrl.net]
> Verzonden: zaterdag 8 augustus 2009 15:58
> Aan: ON4AOI
> Onderwerp: Re: [Dx4win] PSK31 Won't Key K3
>
> Guy,
>
> Thanks for the suggestion.
>
> The PSK31 com port was set on VOX. I changed it to the radio com port
> which is com 5.
>
> When I did this I get the following message:
>
> "An exception occurred device is already open".
>
> DX4WIN in radio preferences has Com 5 set for the radio. Both DTR and
> RTS are checked.
>
> I think we now have a conflict with DX4WIN claiming Com 5 and PSK31
> also trying to claim Com 5. This is just a guess by
> me.
>
> What do I do to fix this?
>
> 73,
>
> Bud W3LL
> w...@arrl.net
>
>
> - Original Message -
> From: "ON4AOI" 
> To: "'Bud Governale, W3LL'" 
> Cc: 
> Sent: Saturday, August 08, 2009 1:26 AM
> Subject: RE: [Dx4win] PSK31 Won't Key K3
>
>
> Make sure you set the correct comport for PSK31
> Right click in psk31 window next to the shortcuts
> and there you can change the settings
>
> Guy ON4AOI
>
> > -Oorspronkelijk bericht-
> > Van: dx4win-boun...@mailman.qth.net [mailto:dx4win-
> > boun...@mailman.qth.net] Namens Bud Governale, W3LL
> > Verzonden: zaterdag 8 augustus 2009 3:03
> > Aan: dx4win@mailman.qth.net
> > Onderwerp: [Dx4win] PSK31 Won't Key K3
> >
> > I'm trying to setup PSK31 using DX4WIN Version 7.07.02.
> >
> > When I hit the TX button I hear the tones but the K3 does not go into
> > transmit.
> >
> > DX4WIN works perfectly in both MMTTY and CW. It keys and sends in
> both
> > of those modes.
> >
> > What do I need to do to get DX4WIN PSK31 to key the K3?
> >
> > 73,
> >
> > Bud W3LL
> > w...@arrl.net
> >
> > __
> > Dx4win mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/dx4win
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:Dx4win@mailman.qth.net
> >
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
>




__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Bandmap radio frequency update speed v8.01

[Mel]

No. D4W requires polling and 1ms is impossible... an Icom radio cannot 
respond that quickly. About 500ms - 1000 ms seems to be ideal for most 
Icoms. Older radios should be even slower. Also I notice that there are 
issues with invalid data being picked up by the band-map if C-IV 
transceive is on. You must turn it off.

Perhaps one day Paul will support asynchronous updates with Icom 
allowing the use of C-IV transceive... but for now we have to poll. With 
Async communications, bandmap updates could be much quicker... though 
I'm not really sure why it's important.

Mel, VE2DC

Olli Tuppurainen wrote:
> Any solution to speed up the bandmap ? 
> 
> I am Using IC-756PROIII with 19200bd and com port poll rate 1ms with
> microham microkeyer. Bandmap seems to be quite slow compared to ones I am
> used to ( win-test and N1MM )
> 
> Otherwise this bandmap is excellent update for DX4WIN, very readable and
> informative with colour coding 
> 
> B.R
> 
> Olli
> OH6CT
> 
> 
> __
> Dx4win mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Dx4win@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> 
__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] DXCC summary report

[Jim Reisert AD1C]

It's a bug, Paul will fix it.

73 - Jim AD1C

On 8/8/2009 9:07 AM, Dick Grolleman wrote:

> Hello All
>
> I do have version 8 working, and I'm very pleased.
> But I do have one problem. First thing I did,  see if my DXCC totals are 
> correct.
> In Mixed it looks ok. But  doing a check on
> Reports|DXCC|Summary and then mode PHO or CW, it gives the result for Mixed, 
> not the mode I selected.
>
> Is this a bug? or do I miss something?
>
> 73 de Dick PA3FQA


-- 
Jim Reisert AD1C, , http://www.ad1c.us
__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] DX cluster hookup?

[Jim Reisert AD1C]

In 8.01, whatever node you select gets moved to the top of the list for 
next time.

There is no way to do an automatic connect.  You still have to enter 
your call.  Please see the section called "Tips" here:

 http://dx4win.ad1c.us/cluster/index.htm#tips

73 - Jim AD1C

On 8/8/2009 9:01 AM, Dennis Petrich wrote:
> Hello all,
>
> This questions is regarding automatic hookup to a DX cluster like AR User by
> VE7CC?  Right now when I bring up dx4win I have to click the connect button
> at the bottom of some window and then select which dx cluster I want to look
> at from a very long list and then enter my call, hit enter then click on
> SH/DX to see the DX.  dx4win knows my call sign, my name, my qth, I can tell
> it what cluster I want, but maybe it already do this and I just don't know
> how to use this feature??
>
> So is there an automatic way to just bring up dx4win and have it
> automatically connect to VE7CC ( or what ever dx cluster I previously
> select)??
>
> Thanks in advance for any help.
>
> Dennis, k0eoo

-- 
Jim Reisert AD1C, , http://www.ad1c.us
__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] DXCC summary report

[Dick Grolleman]

Hello All

I do have version 8 working, and I'm very pleased.
But I do have one problem. First thing I did,  see if my DXCC totals are 
correct.
In Mixed it looks ok. But  doing a check on 
Reports|DXCC|Summary and then mode PHO or CW, it gives the result for Mixed, 
not the mode I selected.

Is this a bug? or do I miss something?

73 de Dick PA3FQA

__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] DX cluster hookup?

[Dennis Petrich]

Hello all,

This questions is regarding automatic hookup to a DX cluster like AR User by 
VE7CC?  Right now when I bring up dx4win I have to click the connect button 
at the bottom of some window and then select which dx cluster I want to look 
at from a very long list and then enter my call, hit enter then click on 
SH/DX to see the DX.  dx4win knows my call sign, my name, my qth, I can tell 
it what cluster I want, but maybe it already do this and I just don't know 
how to use this feature??

So is there an automatic way to just bring up dx4win and have it 
automatically connect to VE7CC ( or what ever dx cluster I previously 
select)??

Thanks in advance for any help.

Dennis, k0eoo 


__ Information from ESET NOD32 Antivirus, version of virus signature 
database 4317 (20090808) __

The message was checked by ESET NOD32 Antivirus.

http://www.eset.com



__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] DX4WIN.MAS2

[W9RPM]

Hey, I am trying to ad this file, and I am not getting it to stick. I must 
be doing something dumb with it. I believe I am following the directions in 
the help file, but something isn't working. Thanks from Brain Dead here.  73 
John W9RPM
EMAIL: j...@w9rpm.com
WEBPAGE: http://www.w9rpm.com/
DX and CONTEST CLUB: http://www.w9idx.com/
AOL IM: W9RPM
YAHOO: W9RPM


__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Bandmap radio frequency update speed v8.01

[Ernie]

Speaking of the band map.

After I saw it mentioned, I searched around trying to activate the band 
map. After an extended period, I finally figured out that I had to right 
click on the packet spots window to find the band map menu item.

Ernie W8EH


__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] Bandmap radio frequency update speed v8.01

[Olli Tuppurainen]

Any solution to speed up the bandmap ? 

I am Using IC-756PROIII with 19200bd and com port poll rate 1ms with
microham microkeyer. Bandmap seems to be quite slow compared to ones I am
used to ( win-test and N1MM )

Otherwise this bandmap is excellent update for DX4WIN, very readable and
informative with colour coding 

B.R

Olli
OH6CT


__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] DX4WIN8-MAS2 files

[ON4AOI]

Hi All,

I updated my webpage with different MAS2 files.
I made a few that I think are good starters for the moment.
Don´t ask me to make more or tell me that there are a few calls
Missing because everyday these listings grow... 

After everybody has read the manual about how to create there
Own Specific members list they will be removed from my page
And replaced with listings that can be used to create your own.
Users that have member-lists (preferable in standard TXT format)
That can be used by ALL DX4WIN USERS can always send them to me.

Available MAS2 files
LoTW members only
LoTW & eQSL members
LoTW & eQSL & DIG members
LoTW & eQSL & DIG & HSCW members
LoTW & DIG & FOC & HSCW members
LoTW & eQSL & FOC & HSCW members

Guy ON4AOI

http://www.on4aoi.be
  

__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html