Re: [Dx4win] Late night question
These are 2 different countries... Le 12/02/2011 08:29, Mark Lunday a écrit : My NEEDED list shows TN as Congo. But I already have 9Q (Zaire) confirmed. Mark Lunday, WD4ELG Greensboro, NC FM06be wd4...@arrl.net http://wd4elg.blogspot.com http://wd4elg.net __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] DX4WIN - Kenwood TS570S Parameters (Repost)
I've been working on computer control for the TS-570S and have it going for N1MM, FLDigi, and HRD but I'm missing something for DX4WIN. The CTRL indication appears on the Kenwood front panel screen for 10 seconds, then disappears and I get an error message: Radio timed out Radio interface has been disabled Here is the setup: DX4WIN 8.04 User Level set to advanced Compaq Presario 1500 laptop Using a Radio Shack Gigaware Serial to USB converter assigned to COM10 Windows XP, SP3 Transceiver: Kenwood TS-570S Preferences: Radio: Kenwood 570S Address 00 Default checked Baud Rate 9600 Default checked RTS checked Kenwood without S meter (However, 570 does have an S meter ) COM port 10 Poll rate (ms) 500 (5000 does not work either) Max Tries 6 Transverter offset 0 Bands None Kenwood Transceiver Menu: 32 Off 33 2 34 6 35 96-1 36 on 37 on If someone is running a similar combination, could you compare your settings and see what I've missed? Thanks, Bill, W4WNT __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] Modes
When I log a QSO, I am required to pick from a list of modes. Most of the time the list is not in a position to display the mode I want. I only use SSB, CW, RTTY and FM. Is there any way to delete the rest of the modes showing on the list?? Thanks, Dean __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] Radio drivers for IC-7600 and IC-7700
Just downloaded the dx4win driver and testing it. The second VFO is continuously checked and the radio goes back to the first VFO after any check. No way to use the Dual Watch, the fast split and many of the standard feature on the second VFO. The driver is useless that way. -- 73 de Max, I8NHJ/NH7CU one of EL2PP, 1A0KM, JT1Y, E30GA, T77V, TT8MM, T32R, K5K, XR0X, S05X, 4O3T, BS7H, K4M, PJ7E on giovedì 10 febbraio 2011 you wrote: JRA Hi Folks, JRA There are new radio drivers (.RIG files) available for the ICOM JRA IC-7600 and IC-7700. These drivers use the v1.10 and v1.20 radio JRA firmware (respectively), and can now tell when the radio is in split JRA mode (instead of transceive) and write the Rx= frequency to the Notes JRA for this QSO field automatically. These radio files are ONLY for JRA DX4WIN 8.05 and later, because DX4WIN needed code changes to support JRA this new ICOM functionality. The IC-7800 was already supported in the JRA DX4WIN 8.05 release. JRA http://dx4win.ad1c.us/radios/ JRA (note: this is a new URL for radio stuff). Each .ZIP file contains JRA two .RIG files - one which sets the CW filter to 250 Hz when going to JRA a DX spots, and the other which sets to the CW filter to 500 Hz. JRA Make sure to go to QSO | Contest Mode and put $$ in the Text to add JRA to QSO note field if you want the Rx= frequency recorded for split JRA frequency operation. You do *not* need to check the Contest Mode JRA Enabled box. JRA You can download the latest ICOM firmware from here: JRA http://www.icom.co.jp/world/support/download/firm/ JRA Note that the v1.10 firmware for the IC-7600 is not currently JRA available from the ICOM web site (the latest is 1.03). If you need a JRA copy of v1.10, let me know. JRA WE ARE NOT RESPONSIBLE FOR ANY PROBLEMS YOU MAY ENCOUNTER WHILE JRA UPGRADING YOUR ICOM's FIRMWARE. PLEASE READ AND FOLLOW ALL OF ICOM's JRA DOCUMENTATION. YOU DO SO AT YOUR OWN RISK. JRA Thanks to Guy ON4AOI for developing the .RIG files, Dick, K7VC for JRA testing the IC-7700 driver, and Jim, AD1C for testing the IC-7600 JRA driver. JRA 73 - Jim AD1C __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] Radio drivers for IC-7600 and IC-7700
Which radio, Max? 7600 or 7700? Dick At 10:39 AM 2/12/2011, Massimo 'Max' MUCCI - I8NHJ wrote: Just downloaded the dx4win driver and testing it. The second VFO is continuously checked and the radio goes back to the first VFO after any check. No way to use the Dual Watch, the fast split and many of the standard feature on the second VFO. The driver is useless that way. -- 73 de Max, I8NHJ/NH7CU one of EL2PP, 1A0KM, JT1Y, E30GA, T77V, TT8MM, T32R, K5K, XR0X, S05X, 4O3T, BS7H, K4M, PJ7E on giovedì 10 febbraio 2011 you wrote: JRA Hi Folks, JRA There are new radio drivers (.RIG files) available for the ICOM JRA IC-7600 and IC-7700. These drivers use the v1.10 and v1.20 radio JRA firmware (respectively), and can now tell when the radio is in split JRA mode (instead of transceive) and write the Rx= frequency to the Notes JRA for this QSO field automatically. These radio files are ONLY for JRA DX4WIN 8.05 and later, because DX4WIN needed code changes to support JRA this new ICOM functionality. The IC-7800 was already supported in the JRA DX4WIN 8.05 release. JRAhttp://dx4win.ad1c.us/radios/ JRA (note: this is a new URL for radio stuff). Each .ZIP file contains JRA two .RIG files - one which sets the CW filter to 250 Hz when going to JRA a DX spots, and the other which sets to the CW filter to 500 Hz. JRA Make sure to go to QSO | Contest Mode and put $$ in the Text to add JRA to QSO note field if you want the Rx= frequency recorded for split JRA frequency operation. You do *not* need to check the Contest Mode JRA Enabled box. JRA You can download the latest ICOM firmware from here: JRAhttp://www.icom.co.jp/world/support/download/firm/ JRA Note that the v1.10 firmware for the IC-7600 is not currently JRA available from the ICOM web site (the latest is 1.03). If you need a JRA copy of v1.10, let me know. JRA WE ARE NOT RESPONSIBLE FOR ANY PROBLEMS YOU MAY ENCOUNTER WHILE JRA UPGRADING YOUR ICOM's FIRMWARE. PLEASE READ AND FOLLOW ALL OF ICOM's JRA DOCUMENTATION. YOU DO SO AT YOUR OWN RISK. JRA Thanks to Guy ON4AOI for developing the .RIG files, Dick, K7VC for JRA testing the IC-7700 driver, and Jim, AD1C for testing the IC-7600 JRA driver. JRA 73 - Jim AD1C __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html -- Dick Flanagan K7VC d...@k7vc.com __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] Radio drivers for IC-7600 and IC-7700
Running a 7700 firmware V1.20 with 8.05 and it doesn't do anything differently than the previous rig file. It doesn't load the split freq into notes with the $$ variable. I tried the radio test mode and itndoesn't read the split mode. Has anyone successfully used the new 7700 driver? Any suggestions? On 2011-02-10 13:33, Jim Reisert AD1C wrote: Hi Folks, There are new radio drivers (.RIG files) available for the ICOM IC-7600 and IC-7700. These drivers use the v1.10 and v1.20 radio firmware (respectively), and can now tell when the radio is in split mode (instead of transceive) and write the Rx= frequency to the Notes for this QSO field automatically. These radio files are ONLY for DX4WIN 8.05 and later, because DX4WIN needed code changes to support this new ICOM functionality. The IC-7800 was already supported in the DX4WIN 8.05 release. http://dx4win.ad1c.us/radios/ (note: this is a new URL for radio stuff). Each .ZIP file contains two .RIG files - one which sets the CW filter to 250 Hz when going to a DX spots, and the other which sets to the CW filter to 500 Hz. Make sure to go to QSO | Contest Mode and put $$ in the Text to add to QSO note field if you want the Rx= frequency recorded for split frequency operation. You do *not* need to check the Contest Mode Enabled box. You can download the latest ICOM firmware from here: http://www.icom.co.jp/world/support/download/firm/ Note that the v1.10 firmware for the IC-7600 is not currently available from the ICOM web site (the latest is 1.03). If you need a copy of v1.10, let me know. WE ARE NOT RESPONSIBLE FOR ANY PROBLEMS YOU MAY ENCOUNTER WHILE UPGRADING YOUR ICOM's FIRMWARE. PLEASE READ AND FOLLOW ALL OF ICOM's DOCUMENTATION. YOU DO SO AT YOUR OWN RISK. Thanks to Dick, K7VC for testing the IC-7700 driver, and Jim, AD1C for testing the IC-7600 driver. 73 - Jim AD1C __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] Radio drivers for IC-7600 and IC-7700
Another bit of useful info. The v1.10 update for the 7600 has been withdrawn. A corrected v1.11 is in the works. On 2011-02-10 13:33, Jim Reisert AD1C wrote: Hi Folks, There are new radio drivers (.RIG files) available for the ICOM IC-7600 and IC-7700. These drivers use the v1.10 and v1.20 radio firmware (respectively), and can now tell when the radio is in split mode (instead of transceive) and write the Rx= frequency to the Notes for this QSO field automatically. These radio files are ONLY for DX4WIN 8.05 and later, because DX4WIN needed code changes to support this new ICOM functionality. The IC-7800 was already supported in the DX4WIN 8.05 release. http://dx4win.ad1c.us/radios/ (note: this is a new URL for radio stuff). Each .ZIP file contains two .RIG files - one which sets the CW filter to 250 Hz when going to a DX spots, and the other which sets to the CW filter to 500 Hz. Make sure to go to QSO | Contest Mode and put $$ in the Text to add to QSO note field if you want the Rx= frequency recorded for split frequency operation. You do *not* need to check the Contest Mode Enabled box. You can download the latest ICOM firmware from here: http://www.icom.co.jp/world/support/download/firm/ Note that the v1.10 firmware for the IC-7600 is not currently available from the ICOM web site (the latest is 1.03). If you need a copy of v1.10, let me know. WE ARE NOT RESPONSIBLE FOR ANY PROBLEMS YOU MAY ENCOUNTER WHILE UPGRADING YOUR ICOM's FIRMWARE. PLEASE READ AND FOLLOW ALL OF ICOM's DOCUMENTATION. YOU DO SO AT YOUR OWN RISK. Thanks to Dick, K7VC for testing the IC-7700 driver, and Jim, AD1C for testing the IC-7600 driver. 73 - Jim AD1C __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] Radio drivers for IC-7600 and IC-7700
Dick, Sorry, I missed to mention the radio indeed. It is the 7600. The split mode is read and set correctly but I suspect that reading the VFO B frequency, the driver issues the commands 'Select VFO B', 'Read Frequency and mode' than 'Select VFO A'. My SteppIr and the K1-Expert connected on the CI-V bus go crazy that way... HI HI HI We just need ICOM makes the Read/set VFO B frequency and mode command available very soon. -- 73 de Max, I8NHJ/NH7CU one of EL2PP, 1A0KM, JT1Y, E30GA, T77V, TT8MM, T32R, K5K, XR0X, S05X, 4O3T, BS7H, K4M, PJ7E on sabato 12 febbraio 2011 you wrote: DF Which radio, Max? 7600 or 7700? DF Dick DF At 10:39 AM 2/12/2011, Massimo 'Max' MUCCI - I8NHJ wrote: Just downloaded the dx4win driver and testing it. The second VFO is continuously checked and the radio goes back to the first VFO after any check. No way to use the Dual Watch, the fast split and many of the standard feature on the second VFO. The driver is useless that way. -- 73 de Max, I8NHJ/NH7CU one of EL2PP, 1A0KM, JT1Y, E30GA, T77V, TT8MM, T32R, K5K, XR0X, S05X, 4O3T, BS7H, K4M, PJ7E on giovedì 10 febbraio 2011 you wrote: JRA Hi Folks, JRA There are new radio drivers (.RIG files) available for the ICOM JRA IC-7600 and IC-7700. These drivers use the v1.10 and v1.20 radio JRA firmware (respectively), and can now tell when the radio is in split JRA mode (instead of transceive) and write the Rx= frequency to the Notes JRA for this QSO field automatically. These radio files are ONLY for JRA DX4WIN 8.05 and later, because DX4WIN needed code changes to support JRA this new ICOM functionality. The IC-7800 was already supported in the JRA DX4WIN 8.05 release. JRAhttp://dx4win.ad1c.us/radios/ JRA (note: this is a new URL for radio stuff). Each .ZIP file contains JRA two .RIG files - one which sets the CW filter to 250 Hz when going to JRA a DX spots, and the other which sets to the CW filter to 500 Hz. JRA Make sure to go to QSO | Contest Mode and put $$ in the Text to add JRA to QSO note field if you want the Rx= frequency recorded for split JRA frequency operation. You do *not* need to check the Contest Mode JRA Enabled box. JRA You can download the latest ICOM firmware from here: JRAhttp://www.icom.co.jp/world/support/download/firm/ JRA Note that the v1.10 firmware for the IC-7600 is not currently JRA available from the ICOM web site (the latest is 1.03). If you need a JRA copy of v1.10, let me know. JRA WE ARE NOT RESPONSIBLE FOR ANY PROBLEMS YOU MAY ENCOUNTER WHILE JRA UPGRADING YOUR ICOM's FIRMWARE. PLEASE READ AND FOLLOW ALL OF ICOM's JRA DOCUMENTATION. YOU DO SO AT YOUR OWN RISK. JRA Thanks to Guy ON4AOI for developing the .RIG files, Dick, K7VC for JRA testing the IC-7700 driver, and Jim, AD1C for testing the IC-7600 JRA driver. JRA 73 - Jim AD1C __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html DF -- DF Dick Flanagan K7VC DF d...@k7vc.com DF __ DF Dx4win mailing list DF Home: http://mailman.qth.net/mailman/listinfo/dx4win DF Help: http://mailman.qth.net/mmfaq.htm DF Post: mailto:Dx4win@mailman.qth.net DF This list hosted by: http://www.qsl.net DF Please help support this email list: http://www.qsl.net/donate.html __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] Modes
Dean, When the cursor is in the Mode window, type the first letter of the mode you want to indicate. If there are several modes starting with the same letter, you may need to repeat the typing. 73, Kjell, PB3SM - SM6CPI -Original Message- From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of Dean Norris Sent: 12 February 2011 19:36 To: dx4win Subject: [Dx4win] Modes When I log a QSO, I am required to pick from a list of modes. Most of the time the list is not in a position to display the mode I want. I only use SSB, CW, RTTY and FM. Is there any way to delete the rest of the modes showing on the list?? Thanks, Dean __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] Modes
Just unselect the modes not used in preferences. They will still appear in the drop down, but the ones you have selected to use appear first so if you enter S, C. R, or F once it will select the right mode. Of course, if your radio is less than 30 years old you can probably read the information automatically. On 2011-02-12 16:12, Kjell W. Strom wrote: Dean, When the cursor is in the Mode window, type the first letter of the mode you want to indicate. If there are several modes starting with the same letter, you may need to repeat the typing. 73, Kjell, PB3SM - SM6CPI -Original Message- From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of Dean Norris Sent: 12 February 2011 19:36 To: dx4win Subject: [Dx4win] Modes When I log a QSO, I am required to pick from a list of modes. Most of the time the list is not in a position to display the mode I want. I only use SSB, CW, RTTY and FM. Is there any way to delete the rest of the modes showing on the list?? Thanks, Dean __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] I want to try this in the spots window
I want to see ONLY the countries which are confirmed on LoTW. So even though I have a card from 3D2, I don't have an LoTW QSO. I want it to show up as an unconfirmed country. Is there a way to do that in 8.03? I tried AWARDS-DXCC-LOTW only. But I did not see a change in the spots windows Mark Lunday, WD4ELG Greensboro, NC FM06be wd4...@arrl.net http://wd4elg.blogspot.com http://wd4elg.net __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html