Re: [Dx4win] Communication between DX4WIN and IC7600 does not work
Thanks David, I changed settings according to your suggestions and it worked. You made my evening. 73 de Mel/SM0MPV Den sön 30 juni 2019 kl 21:47 skrev David Kozinn, K2DBK : > Hi Mel, > > I've got the same radio and am running the same version of Windows. > > My setup is similar to yours, though I've slightly modified the > ON4AOI_500Hz to turn the filter off. I'm also using a baud rate of 19200 > instead of 9600, although as long as the settings in DX4WIN match the radio > it should work fine. > > One other difference is that I've got the poll rate set to 1000ms. I'd try > dropping to that to see if it makes a difference. > > If you want, I can send you the .rig file I'm using (I don't think the > list allows attachments). > > One other thing, had this been working at some point but stopped, or is > this your first try at getting it going? > > 73, > David, K2DBK > > -Original Message- > From: dx4win-boun...@mailman.qth.net On > Behalf Of Mel SM0MPV > Sent: Sunday, June 30, 2019 3:00 PM > To: dx4win > Subject: [Dx4win] Communication between DX4WIN and IC7600 does not work > > Communication between DX4WIN and my ICOM 7600 does not work. > > If I would like to grab a station from the Band Map the frequency changes > accordingly in the Frequency field but after approximately 5 seconds it > changes back to the previous frequency and nothing happens on the radio. > > However, information from radio to program works nicely. If I turn the VFO > frequency changes in the Frequency field accordingly. The same is true for > band and mode changes. > > Both N1MM and DXlog works nicely both directions. > I need help with suggestions what to do? > -- > 73 de Mel - SM0MPV > 8S0C - Contest Call > > Radio: ICOM 7600 > Computor: IBM Thinkpad, X230, Processor i7-3250 CPU 2.90 GHz Docking > station: ThinkPad UltraBase Serie > Connection: USB-cable > > Silicon Labs CP210X USB to UART Bridge v. 10.1.8.2466 > ‒ Port settings 9600 Bit/s, 8, N, 1, Flow control: None > > Windows 10 v.1903 > > DX4WIN v. 9.0.6.1228 > Rig settings: > ‒ ICOM 7600_250MHz by ON4AOI > ‒ Address 7A > ‒ Baud rate 9600 > ‒ Poll rate 5000 ms > ‒ Max tries 6 > ‒ DTR high and RTS high both enabled > __ > DX4WIN mailing list > Home: http://mailman.qth.net/mailman/listinfo/dx4win > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:DX4WIN@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > > __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] Communication between DX4WIN and IC7600 does not work
Communication between DX4WIN and my ICOM 7600 does not work. If I would like to grab a station from the Band Map the frequency changes accordingly in the Frequency field but after approximately 5 seconds it changes back to the previous frequency and nothing happens on the radio. However, information from radio to program works nicely. If I turn the VFO frequency changes in the Frequency field accordingly. The same is true for band and mode changes. Both N1MM and DXlog works nicely both directions. I need help with suggestions what to do? -- 73 de Mel - SM0MPV 8S0C - Contest Call Radio: ICOM 7600 Computor: IBM Thinkpad, X230, Processor i7-3250 CPU 2.90 GHz Docking station: ThinkPad UltraBase Serie Connection: USB-cable Silicon Labs CP210X USB to UART Bridge v. 10.1.8.2466 ‒ Port settings 9600 Bit/s, 8, N, 1, Flow control: None Windows 10 v.1903 DX4WIN v. 9.0.6.1228 Rig settings: ‒ ICOM 7600_250MHz by ON4AOI ‒ Address 7A ‒ Baud rate 9600 ‒ Poll rate 5000 ms ‒ Max tries 6 ‒ DTR high and RTS high both enabled __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] Fwd: Why You Should Backup Your Log - NOW!
Just comment; I have my log saved in Dropbox. I can open it direct from DX4WIN and as DX4WIN remember where the log file is it will always open it from Dropbox. Files are stored and backed up in Dropbox. Since Dropboxfiles are reachable from the computer when it is not connected to the net, it is always possible to use the logbook and then when connected it will be saved online. To be 'extra' sure I save the backup files to an external HD directly from DX4WIN. Dropbox keeps track of versions so if something goes wrong it is possible to go back to an earlier version of the log. -- 73 de Mel - SM0MPV 8S0C - Contest Call 2018-09-06 15:12 GMT+02:00 Jim Reisert AD1C : > An article by W8TN, definitely worth reading: > > https://w8tn.blogspot.com/2018/09/why-you-should-backup-your > -log-now.html > > Also read this application note: > > http://dx4win.ad1c.us/appnotes/backup.html > > I wrote this 12 years ago. The points made are timeless, though some > of the information may be out of date. If so, please let me know and > I'll try to update the application note. > > 73 - Jim AD1C > > -- > Jim Reisert AD1C, , http://www.ad1c.us > __ > DX4WIN mailing list > Home: http://mailman.qth.net/mailman/listinfo/dx4win > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:DX4WIN@mailman.qth.net > Message delivered to sm0...@ssa.se > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > -- 73 de Mel - SM0MPV 8S0C - Contest Call Claes 'Mel' Carneheim Sagov. 3 SE-182 47 Enebyberg SWEDEN __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net Message delivered to arch...@mail-archive.com This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] DX4WIN report for LoTW
Hello Isidor A way to do it is to search for all contacts you have confirmed by LOTW. Press F8 and change LoTW Confirm to Y in the QSO window. Then you have selected all your QSOs confirmed by LOTW. Export them by clicking File|Import/Export and select DX4WIN9 in the Import/Export window. Click File|Export. Save the file as e.g. LoTW Exit Import/Export window by clicking File|Exit. Create a new logbook by clicking File|New and name it e.g. LoTW. Then import the file you just exported by clicking File|Import/Export and select DX4WIN9 in the Import/Export window. Click File|Import and select the file you just exported. Click open Now you have a new logbook with just your contacts confirmed in LoTW and you could create a DXCC report for them. -- 73 de Mel - SM0MPV 8S0C - Contest Call 2018-08-27 13:56 GMT+02:00 Isidro Acosta Hernández : > Hello all. Many thanks to SV1DPI and to N7NU for their answers. I had > done what Kostas suggested, but the resulting numbers always included > all QSOs, whatever I clicked only LoTW, only Paper QSL, or both. I > tried deleting (temporarily!) the QSOs confirmed only via paper QSL, but > I guess this method is not the best. > > Well, I keep looking for a way to get a DXCC summary using only the LoTW > confirmations, or using only the paper QSLs. Thanks beforehand for any > idea! > > Best greetings, > > 73 de Isidro, EA8NQ > E-mail: ea...@hotmail.com > > > Visit the EA8NQ's web page (in Spanish): > http://ea8nq.ure.es/ > > __ > DX4WIN mailing list > Home: http://mailman.qth.net/mailman/listinfo/dx4win > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:DX4WIN@mailman.qth.net > Message delivered to sm0...@ssa.se > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net Message delivered to arch...@mail-archive.com This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] IC7600 and DX4WIN hopefully the last time
Hello again, I think I have solved the problem, however I do not understand why. The problem was> When I click on a spot in the band map or in the spot window the frequency changes accordingly in the band map and in the logging window but after 1-2 s the frequency change back to the one seen on the radio. The mode has changed both in the logging window and on the radio. However, if I change the frequency or the mode on the rig it changes in DX4WIN. Thus, it is only the communication of frequency from DX4WIN to the rig that does not work. Then I tested to use ICOM 756 Pro III as rig but changed the address from 6E to 7A, then everything worked nicely. I compared ICOm 756 Pro III and ICOM 7600 rig-files and one of the differences were the ADDR line stating 110 for ICOM 7560 Pro III and 122 for ICOM 7600. All other differences are listed at the very end of all other listings below. I changed the address to 110 in the ICOM 7600 and the default address changed to 6E in the radio setting window in DX4WIN. If running the program as this the connection between radio and program timed out and the connection was disabled. Then I changed the address manually to 7A in the radio setting window in DX4WIN. The result was a fully functional connection between DX4WIN and the rig. It seems like it was the presetting of ADDR=122 that made the problem. This commadnd dit set 7A as default address in DX4WIN, but something must have gone wrong. I write all this in the hope that those who know programming than me should be able to find a more proper solution. I have got two comments from peoples that have had the same problem; one who changed to another port to serial program and the other who used the earlier version of Silicon Labs CP210x USB to UART Bridge, i.e. v. 6.6.0.0. As is it seems to work and I am happy with it. I have once again listed all equipment, settings and program versions below. -- 73 de Mel - SM0MPV 8S0C - Contest Call The Computer is A Dell Optiplex 980 Intel(R) Core(TM) i/ CPU 870 @ 2.93 GHz RAM 12.0 GB (3.43 GB usable) 32-bit Operating system Windows 7 Professional Service Pack 1 DX4WIN v. 9.0.0.4.1176 Rig: ICOM IC-7600 connected to the USB-B port on the back The latest firm ware installed I have the latest driver for the port: Silicon Labs CP210x USB to UART Bridge v. 6.7.0.0 2014-03-19. COM-port Settings: Baud rate: 9600 BPS Data bits: 8 Parity: None Stop bits: 1 Flow control: None Rig settings: CI-V baud rate: 9600 CI-V Address: 7Ah CI-V Tranceive: OFF CI-V OutPut (for ANT): OFF USB Serial Function: CI-V DX4WIN settings: ICOM 7600 _K2DBK, i.e. ON4AOI except the filter. There is no difference if I use IC7600_500Hz or IC7600_250Hz by ON4AOI. Address: 7A Baud Rate: 9600 COM port: COM6 Poll rate (ms): 1000 Max tries: 6 DTR high and RTS high ticked Differences between ICOM 756 Pro III and ICOM 7600 rig- files [GENERAL] [GENERAL] MODEL=ICOM 756 Pro III MODEL=ICOM 7600_500Hz NOTES=Selects narrow filter for CW/SSB NOTES=500Hz_ON4AOI DATE=39982 DATE=40484 FHIGH= 5.20E+0004 FHIGH= 6.00E+0004 ADDR=110 ADDR=122 REVMODEFREQ=0 CNFL=6 CNFL=5 [MODES] [MODES] PSK31=18,19;18,19;N [RF-Clarifier] [RF-Clarifier] CMD=Read Status CMD=No Command POS=0 POS=5 LM=0 LM=1 [RF-Current VFO is B] [RF-Current VFO is B] CMD=Read Status CMD=No Command FMT=Flag FMT=BCD [RF-Write Mode A] CMD=No Command FMT=BCD POS=0 LM=0 __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net Message delivered to arch...@mail-archive.com This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] Problem connecting a IC7600
Thanks for your suggestion Tibor. I think something that the problem is the IC-7600 RIG file. If I use ICOM 756 PRO III rig file and change the address to 7A Hex everything works except if I press PSK on the radio, then the mode in the log-window shows SSB. This is maybe how it should be if the PSK is generated via the sound card in the rig. I am not a programmer and can thus not compare the two RIG files. Below I have added all the tests I have done and once again all settings etc. 73 de Mel/SM0MPV When I click on a spot in the band map or in the spot window the frequency changes accordingly in the band map and in the logging window but after 1-2 s the frequency change back to the one seen on the radio. The mode has changed both in the logging window and on the radio. However, if I change the frequency or the mode on the rig it changes in DX4WIN. Thus, it is only the communication of frequency from DX4WIN to the rig that does not work. Everything works if I use N1MMplus or Ham Radio Delux. I can connect to a Kenwood TS-590 with DX4WIN. The problem remains if I connect another computer, this time with Windows 10 and 64-bit system. N1MMplus works with IC-7600 and DX4WIN connection to the TS-590 works from this computer. I have changed cables and ports without success. The remote jack (CI-V jack) has been both connected and unconnected to my amplifier (SPE Expert 1K-FA) and it did not affect the result. I have restarted the computer and the rig several times, but not in any systematical way. The Computer is A Dell Optiplex 980 Intel(R) Core(TM) i/ CPU 870 @ 2.93 GHz RAM 12.0 GB (3.43 GB usable) 32-bit Operating system Windows 7 Professional Service Pack 1 DX4WIN v. 9.0.0.4.1176 Rig: ICOM IC-7600 connected to the USB-B port on the back The latest firm ware installed I have the latest driver for the port: Silicon Labs CP210x USB to UART Bridge v. 6.7.0.0 2014-03-19. COM-port Settings: Baud rate: 9600 BPS Data bits: 8 Parity: None Stop bits: 1 Flow control: None Rig settings: CI-V baud rate: 9600 CI-V Address: 7Ah CI-V Tranceive: OFF CI-V OutPut (for ANT): OFF USB Serial Function: CI-V DX4WIN settings: ICOM 7600 _K2DBK, i.e. ON4AOI except the filter. There is no difference if I use IC7600_500Hz or IC7600_250Hz by ON4AOI. Address: 7A Baud Rate: 9600 COM port: COM6 Poll rate (ms): 1000 Max tries: 6 DTR high and RTS high ticked Den fre 10 aug. 2018 kl 12:19 skrev Tibor M. Blum - IK2SAI - My scheme is very similar to yours: ic7600 connected via retro USB to PC > and the SPE1.5K-FA connected to the IC7600 remote port. > I have found the solution using the VSPE software. Instead to connect > direct the ic7600 to a real com i conect it to a virtual port. > You have just to switch on the radio as the first thing, than load the > configuration of VSPE and, at this point (after have modified in the > preferences dx4win from the real to the virtual radio port) load the dx4win. > It takes just few second and it works great. > VSPE software is free and it is not necessary at 100% to buy the licence. > I bought the licence because, in this way, i can memorize the configuration > of VSPE and at the start all is easier. > So this is my configuration and it works 100%. > In any case, give a try! > Vy 73 de Tibor, IK2SAI > > - __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net Message delivered to arch...@mail-archive.com This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] Problem connecting a IC7600
No, it doesn't. Thanks for your comments David. I have tried several things but the problems remains When I click on a spot in the band map or in the spot window the frequency changes accordingly in the band map and in the logging window but after 1-2 s the frequency change back to the one seen on the radio. The mode has changed both in the logging window and on the radio. However, if I change the frequency or the mode on the rig it changes in DX4WIN. Thus, it is only the communication of frequency from DX4WIN to the rig that does not work. Everything works if I use N1MMplus or Ham Radio Delux. I can connect to a Kenwood TS-590 with DX4WIN. The problem remains if I connect another computer, this time with Windows 10. N1MMplus and connection to the TS-590 works from this computer. I have changed cables and ports without success. The remote jack (CI-V jack) has been both connected and unconnected to my amplifier (SPE Expert 1K-FA) and it did not affect the result. I have restarted the computer and the rig several times, but not in any systematical way. Do you have any suggestions? 73 de Mel/SM0MPV Rig: ICOM IC-7600 connected to the USB-B port on the back I have the latest driver for the port: Silicon Labs CP210x USB to UART Bridge v. 6.7.0.0 2014-03-19. Windows 7 Professional DX4WIN v. 9.0.0.4.1176 COM-port Settings: Baud rate: 9600 BPS Data bits: 8 Parity: None Stop bits: 1 Flow control: None Rig settings: CI-V baud rate: 9600 CI-V Address: 7Ah CI-V Tranceive: OFF CI-V OutPut (for ANT): OFF USB Serial Function: CI-V DX4WIN settings: ICOM 7600 _K2DBK, i.e. ON4AOI except the filter. There is no difference if I use IC7600_500Hz or IC7600_250Hz by ON4AOI. Address: 7A Baud Rate: 9600 COM port: COM6 Poll rate (ms): 1000 Max tries: 6 DTR high and RTS high ticked Den mån 6 aug. 2018 kl 20:16 skrev David Kozinn, K2DBK : > Hi Mel, > > > > My any chance is there any other software running on your computer that > might be trying to connect to your radio? The fact that it changes but then > changes back seems strange. If it couldn’t connect at all that would be > something to look at, but it looks like it does connect. I have the same > USB to UART bridge as you do, and the only difference I can see is that I > use Windows 10 Pro instead of Windows 7, but I do not believe that could be > causing the problem. > > > > There are ways to trace traffic on a USB connection, but unless you are > comfortable with that sort of thing I’d prefer to save that as a last > resort. > > > > *From:* Mel SM0MPV > *Sent:* Monday, August 06, 2018 11:40 AM > *To:* k2...@arrl.net > *Cc:* dx4win > *Subject:* Re: [Dx4win] Problem connecting a IC7600 > > > > Thanks David, > > > > I have just tested your RIG file too and I got the same result as earlier. > > What I see is that when I click on a spot o the band map the program > changes frequency bet then very soon goes back to the first one. The > callsign for the spoted station remains in the QSO window. When I turn the > dial on the radio the frequency changes in the band map and in the QSO > window in DX4WIN. > > > > I use the Silicon Labs CP210x USB to UART bridge > > > > I have the com port set to: > > Bits per second: 9600 > > Parity: None > > Stop bits: 1 > > Row control: None > > It is Windos 7 Professional I use > > > > The radio settings in DX4WIN are > > ICOM 7600 _K2DBK, i.e. ON4AOI except the filter. > > Address: 7A > > Baud Rate: 9600 > > COM port: COM6 > > Poll rate (ms): 1000 > > Max tries: 6 > > DTR high and RTS high marked > > > > I connect the the computer and the rig via an USB A and B cable > > > > The settings in the radio are: > > CI-V baud rate: 9600 > > CI-V Address: 7Ah > > CI-V Tranceive: OFF > > CI-V OutPut (for ANT): OFF > > USB Serial Function: CI-V > > > > I will later connect my SPE Expert 1K-FA amplifier to the rig. Since it > can just communicate with 9600 baud so I believe I am stucked with this > baud rate. The communication goes between the remote (CI-V) jack on the rig > and the RS 232 connection on the amplifier. > > > > 73 de Mel / SM0MPV > > > > > > > > > > Den lör 4 aug. 2018 kl 18:22 skrev David Kozinn, K2DBK : > > Hi Mel, > > I guess I have a couple of thoughts: Did you install the Icom USB driver? > You're supposed to do that before ever plugging in the radio, although I'm > not sure how important that is. I am guessing that you did since you said > it > works with N1MM. I have my baud rate set to 19200 and the CI-V address set > to 7A. Here are the other settings since maybe this will help: > > CI-V Transceive: Off > CI-V Output (for ANT): Off > US
[Dx4win] Stil problems with my IC-7600
Hello again, I have the following problems: When I click on a spot either on the band plan or in the spot window. The callsign turns up in the Callsign field in the loging window. The frequency and the mode changes but the frequency goes back to the initial, i.e. the one on the radio had at start while the mode changes to the one the station I was clicking on had. Eg. if the radio is on 14040 and cw and I click on SM0XX on 14253 DX4WIN add SM0XX and SSB in respective field, the program also changes the frequency to 14253 but after 2-3 seconds it changes back to 14040. When it jump back the Follow radio box is ticked on the band map. The mode remains on SSB. If I turn the VFO dial on the rig the frequency changes accordingly in DX4WIN and remains on the frequency set. The same goes for changing mode on the rig, DX4WIN follows. I can run my TS-590 over an USB A-B connection. I have it set up as second radio and can start it within the program. So my question is , why is not the frequency added in DX4WIN. What setting have I missed? Here are my settings. Using Windows 7 Professional I use the Silicon Labs CP210x USB to UART bridge I have the com port set to: Bits per second: 9600 Parity: None Stop bits: 1 Row control: None It is Windos 7 Professional I use The radio settings in DX4WIN are ICOM 7600 _K2DBK, i.e. ON4AOI except the filter. Address: 7A Baud Rate: 9600 COM port: COM6 Poll rate (ms): 1000 Max tries: 6 DTR high and RTS high marked I connect the the computer and the rig via an USB A and B cable The settings in the radio are: CI-V baud rate: 9600 CI-V Address: 7Ah CI-V Tranceive: OFF CI-V OutPut (for ANT): OFF USB Serial Function: CI-V 73 de Mel - SM0MPV 8S0C - Contest Call __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net Message delivered to arch...@mail-archive.com This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] Problem connecting a IC7600
Thanks David, I have just tested your RIG file too and I got the same result as earlier. What I see is that when I click on a spot o the band map the program changes frequency bet then very soon goes back to the first one. The callsign for the spoted station remains in the QSO window. When I turn the dial on the radio the frequency changes in the band map and in the QSO window in DX4WIN. I use the Silicon Labs CP210x USB to UART bridge I have the com port set to: Bits per second: 9600 Parity: None Stop bits: 1 Row control: None It is Windos 7 Professional I use The radio settings in DX4WIN are ICOM 7600 _K2DBK, i.e. ON4AOI except the filter. Address: 7A Baud Rate: 9600 COM port: COM6 Poll rate (ms): 1000 Max tries: 6 DTR high and RTS high marked I connect the the computer and the rig via an USB A and B cable The settings in the radio are: CI-V baud rate: 9600 CI-V Address: 7Ah CI-V Tranceive: OFF CI-V OutPut (for ANT): OFF USB Serial Function: CI-V I will later connect my SPE Expert 1K-FA amplifier to the rig. Since it can just communicate with 9600 baud so I believe I am stucked with this baud rate. The communication goes between the remote (CI-V) jack on the rig and the RS 232 connection on the amplifier. 73 de Mel / SM0MPV Den lör 4 aug. 2018 kl 18:22 skrev David Kozinn, K2DBK : > Hi Mel, > > I guess I have a couple of thoughts: Did you install the Icom USB driver? > You're supposed to do that before ever plugging in the radio, although I'm > not sure how important that is. I am guessing that you did since you said > it > works with N1MM. I have my baud rate set to 19200 and the CI-V address set > to 7A. Here are the other settings since maybe this will help: > > CI-V Transceive: Off > CI-V Output (for ANT): Off > USB Serial Function: CI-V > > In DX4WIN, I have the poll rate set to 1000ms and Max tries set to 6. > > I've attached a copy of the RIG file that I use. It's basically the same as > the standard 7600_500 except that I think I changed the filter to default > to > off. > > > -Original Message- > From: dx4win-boun...@mailman.qth.net On > Behalf Of Mel SM0MPV > Sent: Saturday, August 04, 2018 5:53 AM > To: dx4win > Subject: [Dx4win] Problem connecting a IC7600 > > I have just bought an IC 7600 and have been struggling to get the > communication between the computer and the rig to work. > > I us a Dell with XP professional 64 bits, DX4WIN 9.04 and have connected > the > rig with an USB-cable. I have an SPE Expert 1K-FA amplifier connected via > ALC, Send and C-IV. > > All baud rates are set the same 9600 in DX4WIN, the com port, the rig and > amplifier. > > I have tried to use both ICOM 7600_250Hz and the ICOM 7600_500Hz > > The program and rig do not match, when clicking on a spot or a spot from > the > band map. It seems like it is the frequencies that do not match, mode > changes, but I have not tested this so much. > > When using N1MM everything works. > > Any suggestions what to do? > -- > 73 de Mel - SM0MPV > 8S0C - Contest Call > __ > DX4WIN mailing list > Home: http://mailman.qth.net/mailman/listinfo/dx4win > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:DX4WIN@mailman.qth.net > Message delivered to k2...@arrl.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > -- 73 de Mel - SM0MPV 8S0C - Contest Call Claes 'Mel' Carneheim Sagov. 3 SE-182 47 Enebyberg SWEDEN __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net Message delivered to arch...@mail-archive.com This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] Problem connecting a IC7600
I have just bought an IC 7600 and have been struggling to get the communication between the computer and the rig to work. I us a Dell with XP professional 64 bits, DX4WIN 9.04 and have connected the rig with an USB-cable. I have an SPE Expert 1K-FA amplifier connected via ALC, Send and C-IV. All baud rates are set the same 9600 in DX4WIN, the com port, the rig and amplifier. I have tried to use both ICOM 7600_250Hz and the ICOM 7600_500Hz The program and rig do not match, when clicking on a spot or a spot from the band map. It seems like it is the frequencies that do not match, mode changes, but I have not tested this so much. When using N1MM everything works. Any suggestions what to do? -- 73 de Mel - SM0MPV 8S0C - Contest Call __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net Message delivered to arch...@mail-archive.com This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] Mode RTTYM
Hello, Suddenly has RTTY changed to RTTYM in the list of modes. All my old rtty contacts are listed as RTTY, however when adding a new QSO, or since I work AFSK I change the mode after the QSO to RTTY instead of SSB, the only RTTY mode in my list is RTTYM. RTTYM is exported to the adif file for uploadng to various databases. Is this as it should be? I am using DX4WIN 9.02 and a lenovo ThinkPad X230. -- 73 de Mel - SM0MPV 8S0C - Contest Call __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net Message delivered to arch...@mail-archive.com This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] Lost logbook window
Now fixed thanks to Chris DL5NAM. However, the question regarding v8.5 remains Were can I find a safe download of version 8.5? 73 de Mel 2017-10-31 9:36 GMT+01:00 Mel SM0MPV <sm0...@ssa.se>: > Hello, > > I have lost my logbook window in v8.5. I can see the windowbar with the > DX4WIN logo and Report: Logbook but nothing under it, i.e. no QSOs listed. > > Any sugestions how to restor the logbook window? > > Were can I find a safe download of version 8.5? > > 73 de Mel - SM0MPV > 8S0C - Contest Call > __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net Message delivered to arch...@mail-archive.com This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] Lost logbook window
Hello, I have lost my logbook window in v8.5. I can see the windowbar with the DX4WIN logo and Report: Logbook but nothing under it, i.e. no QSOs listed. Any sugestions how to restor the logbook window? Were can I find a safe download of version 8.5? 73 de Mel - SM0MPV 8S0C - Contest Call __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net Message delivered to arch...@mail-archive.com This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] Too long callsigns?
Hello and HNY to you all, Is there any possibility to change the field length of the Callsign field. As is the Canadian calls VE100VIMY/Vxx is not possible to add into the log. I guess it is possible tho change the adif file before loading it to LOTW, but it will not be confimed in my log if the call is too long. Any suggestions? -- 73 de Mel - SM0MPV 8S0C - Contest Call __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] Bug when importing from LOTW
Hello! If stations from Russia has added their oblast in LOTW, those from Moscow (MA) or Moscow region (MO) will in DX4WIN sometimes be added as MA zone 5 or MO zone 4, respectively. Thus it seems like if there is an abrevation that is the same as an US state it will be entered in the state field and the CQ zone of that state will be added, independent of country prefix. This has also true for one VK6 stations (WA) and and one BY4 stations (SD). I have attached a copy of a record from LOTW that afte import to DX4WIN turns up as: Perfix UA State MO Zone 4 It is not all imported records that have this effekt. The second record (R3AG) did not add MA to the State field. I am using DX4WIN 8.05 on a Lenovo Thinkpad X201 with Windows 7. 73 de Mel - SM0MPV 8S0C - Contest Call APP_LoTW_OWNCALL:48S0C STATION_CALLSIGN:48S0C CALL:6UA3DSS BAND:320M FREQ:814.18500 MODE:3SSB APP_LoTW_MODEGROUP:5PHONE QSO_DATE:820120324 TIME_ON:6135257 QSL_RCVD:1Y QSLRDATE:820140922 DXCC:254 COUNTRY:15EUROPEAN RUSSIA APP_LoTW_DXCC_ENTITY_STATUS:7Current PFX:3UA3 APP_LoTW_2xQSL:1Y CQZ:216 ITUZ:229 GRIDSQUARE:6KO85sk STATE:2MO eor APP_LoTW_OWNCALL:48S0C STATION_CALLSIGN:48S0C CALL:4R3AG BAND:320M FREQ:814.17004 MODE:3SSB APP_LoTW_MODEGROUP:5PHONE QSO_DATE:820110514 TIME_ON:6124019 QSL_RCVD:1Y QSLRDATE:820140921 DXCC:254 COUNTRY:15EUROPEAN RUSSIA APP_LoTW_DXCC_ENTITY_STATUS:7Current PFX:2R3 APP_LoTW_2xQSL:1Y CQZ:216 ITUZ:229 GRIDSQUARE:6KO85tt STATE:2MA eor __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] Info request re import log
Hi Bob, The easiest answer is to export your current log as an ADIF file and import the ADIF file into DX4WIN. However, it is depending on how you would like your logbook in DX4WIN to work. If you are working from different QTHs or if you have different callsigns you may consider using the group feature as been suggested by Kostas in another thread above. Then you can combined all calls and QTHs for statistics, DXCC and other diplomas. I suggest that you start with a small portion of your log to see how it works and if the result is satifactory. 73 de Mel - SM0MPV 8S0C - Contest Call 2013/3/5 Robert Crawford bob...@eastlink.ca: Greetings... I am considering import of Amateur Radio Log Database - WB2DND - as this current log has started to give me troubles, like mainly no printing abilities from any platform or requestSo... Would appreciate any and all comments re this import to DX4WIN ... Any references to satisfactory completion/or problems of input Details if any re the filters needed and useage... Sorry for a lot of requests, but hope help is nearby, Thanks Bob VE1REC __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html -- 73 de Mel - SM0MPV 8S0C - Contest Call __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] DX4WIN and IOTA
Hi Alan, You cannot upload any files for IOTA awards unless you have participated in the IOTA contest and submitted an cabrillo file for participating in the contest. Then you can use that file to add the new island you worked and that have been accepted as an valid contact in the contest to your IOTA account. This is possible first when the logs have been checked. The change from submitted to checked If you go in under the report heading in the top menu of the QSO window and click on the Award flags button you can in the Award field select IOTA mixed and in the Action field select Submitted - Checked. Then all contacts you have labeled with a S in the IOTA column and the mixed field will be converted to a C for checked. Good luck in the chasing of IOTAs Mel - SM0MPV 8S0C - Contest Call 2013/2/6 ALAN ZACK k7...@cox.net: I wonder if there are any DX4WIN users out there who also make submissions to their IOTA card checker for IOTA credits. I know I can use the REPORT GENERATOR: IOTA: SUBMISSIONS and get a list of IOTA contacts that I have marked for submission in the bottom of the main logging window. I also know I can download this report as a excel file. Now after I made my submission I have 249 IOTA's confirmed for credit. Now I need to change the status of these 249 contacts from S to C. Is there an easy way to do this other than change each contact individually? Also is there an easy way to export IOTA QSO data from DX4WIN to a file to import to the IOTA webpage submissions page? Presently I use the excel file I generate from DX4WIN and manually type in the data for each QSO into the IOTA submissions page. After my submissions are completed by RSGB IOTA I can download a .csv file of my IOTA credits. Is there any way I can use this .csv file to import to DX4WIN to change my submission status from S to C? Below is an example of the .csv file data that I can get from the IOTA web pages if this info could be used to update DX4WIN other than doing it manually: Ref. No. Callsign Date and UTC Status: AF-001 3B6RF 5/15/2001 3:10 All bands QSL Accepted AF-002 FT5ZH 11/30/1998 23:49 All bands QSL Accepted AF-004 EA8ZS 7/28/2007 22:19 All bands Contest Accepted AF-011 FT5GA 9/16/2009 19:17 All bands QSL Accepted AF-014 CQ9T 7/28/2007 22:21 All bands Contest Accepted DX4WIN works FB for tracking, updating, importing and exporting LOTW data and credits. Is there any way to do the same for IOTA credits? TIA and 73 Alan, K7ACZ __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html -- 73 de Mel - SM0MPV 8S0C - Contest Call __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] How to find what new countries I worked
It would be nice with a report showing stations not worked. -- 73 de Mel - SM0MPV 8S0C - Contest Call 2012/12/4 Jim Reisert AD1C jjreis...@alum.mit.edu: On Mon, Dec 3, 2012 at 8:14 PM, David Kozinn, K2DBK k2...@arrl.net wrote: It seems to me that someone must have figured this out, but I couldn't find any info, so before I re-invent the wheel: The DX4WIN Progress report for DXCC will give you a summary of how you've progressed since a previous date. I'd like a way to get the details for that so that I can see what new entities I've worked over the last year. I can probably massage the data to get this info, but I was wondering if anyone had figured out a simple way to do this. I don't know of a good way to do this. I worked five new countries for the year (CQ Marathon) in the recent CQWW CW contest, but I can't identify three of them without resorting to some crazy searches outside DX4WIN, which I'm too lazy to do. I just wanted to know out of curiosity more than anything else. The only ones I do know are 5H (new all-time from Colorado) and EL, which I knew I wouldn't work before the contest. I had already worked 7P and 5T earlier in the year, so I know those weren't it. - Jim -- Jim Reisert AD1C, jjreis...@alum.mit.edu, http://www.ad1c.us __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] RDA contest and Convert ADIF to DX4WIN
Hi Teijo, You can easily add the missing districts by open the awd file in the save-directory with a text editor, e.g. Notpad. Search City of Moscow (MA) and after MA-10 add the other two in the same way as the other RDs are written. Save 73 de Mel - SM0MPV 8S0C - Contest Call 2012/8/21 teijo.murtova...@netikka.fi: Lainaus Jim Reisert AD1C jjreis...@alum.mit.edu: The RDA (Russian District) contest was this past weekend. The Convert ADIF to DX4WIN program has some ability to populate the Custom Award fields from the RDAs you logged: http://dx4win.ad1c.us/adif2dxq/ It appears N1MM and maybe WriteLog are both supported, but probably not Win-Test. If you used a logger besides N1MM and WriteLog, and want me to add support for RDA, please send me the ADIF file exported from your logging software. 73 - Jim AD1C Hi Jim, I noticed that in DX4Win the districts of MA area (Moscow city) are limited to MA-10 but in the RDA contest there was a station that gave me MA-12 which is also listed in the RDA web page http://rdaward.org/rdac1.htm (link RDA List). So the following districts are missing from the dx4win.awd: MA-11 NOVOMOSKOVSKY MA-12 TROITSKY I tested adif2dxq briefly yesterday with the RDA contest adif file and it seemed to populate the award fields. I have to check again that the populated fields are really the ones that I had in the WinTest log. 73 de Teijo, OH6NIO __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html -- 73 de Mel - SM0MPV 8S0C - Contest Call __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] Continet as report field
Hi all! Is there a way to get Continent included in the reports? I cannot find it as a tag in the report editor. The cty file includes this information. It would be handy to have this information, since I would be easier to create statistics on scout camps and other public activities -- 73 de Mel - SM0MPV 8S0C - Contest Call __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] Reconciling DXCC credits with DX4WIN
Credits received before the computerization of the ARRL DXCC program turns up as the entities prefix i.e. EP2AU worked in 1964 turns up as EP in the list. My suggestion is that if you have contacts from this time and do not know which one actually was used; choose one of the stations you have a QSL card from then you can change that QSO's DXCC award flags to match the DXCC credit shown on LoTW.as Jim suggest in his mail. It is not the actual callsign that is compared in Jim's very useful program. 73 de Mel - SM0MPV 8S0C - Contest Call 2012/4/10 Jim Reisert AD1C jjreis...@alum.mit.edu I'm sure a couple of you have read this application note: DXCC Award Tracking in DX4WIN http://dx4win.ad1c.us/appnotes/dxcc.html and maybe a few have tried this program Compare DX4WIN DXCC Credit Status with LoTW http://dx4win.ad1c.us/lotw/ Here's a tip about how to make DX4WIN match your ARRL DXCC records when you have been awarded DXCC credit, but DX4WIN does not have a record of such. Lot into your Logbook of the World (LoTW) account. Click on the Awards link at the top, then Select DXCC Award Account on the left. You will see a table showing the number of DXCC credits you have been awarded for each award. Notice that the Award names (i.e. CW or 40M) are hyperlinks. Click on one of those links. Next, you'll see another window with some choices. Next to View, select the radio button that says All credits. Then click on Select DXCC Award to View. You will get a listing with two columns -- Entity on the left and the DXCC award name you selected (i.e. 40M) on the right. The callsigns in the right-hand column are all hyperlinks. By clicking on a callsign, you will see the actual QSO data for which you received that DXCC credit, i.e. Palau. You can use this information to identify the matching QSO in DX4WIN, then you can change that QSO's DXCC award flags to match the DXCC credit shown on LoTW. (i.e. set DXCC Band flag to C[hecked]). Repeat for all all DXCC credits until you can run the Compare DX4WIN DXCC Credit Status with LoTW program with no errors. I don't know which QSO comes up for credits that your received before the computerization of the ARRL DXCC program. However, matching ANY confirmed QSO on the same band or mode will give you the same credit. 73 - Jim AD1C -- Jim Reisert AD1C, jjreis...@alum.mit.edu, http://www.ad1c.us __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html -- 73 de Mel - SM0MPV 8S0C - Contest Call __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] Sent RTTY text appears backwards on screen
Hi all, I have tried to configure RTTY and it seems to transmit. However when I try to read the text that is sent it is printed backwards on the screen and nothing is saved. I have not tried to use it in practise but have to ask if I have missed any settings. When using PSK everything looks normal.. -- 73 de Mel - SM0MPV 8S0C - Contest Call __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] Sent RTTY text appears backwards on screen
When I restarted the computer everything worked ... Mel 2011/11/11 sm0mpv sm0...@stockholm.bonet.se Hi all, I have tried to configure RTTY and it seems to transmit. However when I try to read the text that is sent it is printed backwards on the screen and nothing is saved. I have not tried to use it in practise but have to ask if I have missed any settings? When using PSK everything looks normal... -- 73 de Mel - SM0MPV 8S0C - Contest Call -- 73 de Mel - SM0MPV 8S0C - Contest Call __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] Zone conflicts after importing the log from CQWW
Hi, When importing my log from CQWW i got 23 conflicting zones reports. The are all concerning stations within zone 4 and 5. Some might be my error but other not, e.g. K5ZD reported zone 5 but when importing the zone was changed to 4. Is there a way to check these? N1MM, the contest logging program I use, did not report any zine error. However, I do not think check routine is based on callsign and US state. A little comment out of the topic - it was amazing conditions during this weekends contest. I hope they remain. -- 73 de Mel - SM0MPV 8S0C - Contest Call __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] log
Hi Arne, I have no problems doing this. Neiter with going through the menu nor using F9. However, after clicking OK in the NO MATCH FOUND window my logbook entry window still retained the serched call. Am using DX4WIN 8.05 and Widows XP. -- 73 de Mel - SM0MPV 8S0C - Contest Call __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] Application list for custom awards
Hi, In earlier versions of DX4WIN it was possible to get a report for custom awards that contained station call, time, date and if worked, mailed or confirmed. This was very convenient when it was time to apply. Now, it is just possible create a list with acceptable award criteria (entities) and if confirmed. Is it possible in version 8 to make a list for custom awards where award entity, call, date, time, band and if confirmed is shown, as it was in eaerlier versions? 73 de Mel – SM0MPV 8S0C – Contest Call __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] Checking eQSL, LoTW or QSL DXCC
Hello, I was curious and thought I should check my eQSL status. I checked the eQSL box and unchecked QSL card and LotW. When looking at the results all my by ARRL checked contacts gave a checked result. The same happened when I just checked either the LotW or the QSL card box. All accepted contacts were marked. 73 de Mel - SM0MPV 8S0C - Contest Call __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] Thanks Paul and Jim
Thanks for the new updates. It was good to see that now it is possible to track IOTA award by alson including the island just confirmed through IOTA-contest in v.8.05. The use of ziped files made the updates much faster and it worked very nicely. 73 de Mel -SM0MPV 8S0C - Contest Call __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] 3422 70x35 mm Labels
Hello, Dose someone have the settings for a label called 3422 70x35 mm? Mel - SM0MPV 8S0C - Contest Call __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] Labels
Hello, Can someone help me with the label settings for Avery Zweckform 3422 (A4, 3x8, 70x35 mm) 73 de Mel -SM0MPV Contest Call - 8S0C __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] Keep track of IOTA and Russian oblast credits
Hello Kostas HNY and thanks for your answer. I have changed the award flags in IOTA, RDA and Russian oblast contest to both S for submitted and C for checked and neither turns up in the reports as submitted or checked if not the QSL flag is set to Y. I am using DX4WIN 8.04. I tried to uncheck all boxes in Awards|Confirmation without success. So it seems like the problem is consistent for both IOTA and Costume awards. It would be very good for IOTA chasing if it in the IOTA window could bee seen if an Island group has been checked or not. As is it is just the ones that are confirmed with QSL that are seen as C, if not the boxes for LotW or eQSL is marked. However, the latter is of no use since neither confirmations through LotW nor eQSL accounts for IOTA awards. 73 de Mel - SM0MPV 8S0C - Contest Call 2011/1/7 Kostas Stamatis sv1...@otenet.gr: Hello Mel and HNY You can change manually the flags to Checked even a qso is not confirmed. I have not ever run the iota contest as i am in vacations or in a dxpedition and run with other call but i have done the Russian contest many times. Every time i get a report from them, i change manually the custom award flags to C (checked). I am sure that i had checked this in past and i hope still works. Pse try it and tell us if it is still ok. 73 Kostas SV1DPI - Original Message - From: Mel SM0MPV sm0...@stockholm.bonet.se To: dx4win Dx4win@mailman.qth.net Sent: Friday, January 07, 2011 12:55 AM Subject: [Dx4win] Keep track of IOTA and Russian oblast credits Hi, I know that I am back to an old topic but since it has presently been possible to get credits for 2010 IOTA contest by uploading the Cabrillo log I had to bring it up again. Uploading cabrillo logs is a way to get credits for contacts that not have been QSLed. If tagging S or C in the award fields they will not be recognised unless these contacts have a confirmation either from a card or LotW. It is not possible to claim IOTA credits from contacts confirmed through LotW. Since contacts made during the IOTA contest are accepted as credits by RGSB without any cards, if both stations have entered their logs, it is not possible to keep track of the IOTA award in DX4WIN. The same problem is true for Russian oblast award, since contacts made during RDXC could be used to claim credits. I sincerely hope this will be changed in the next version. 73 de Mel – SM0MPV 8S0C – Contest Call __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] Keep track of IOTA and Russian oblast credits
Hi, I know that I am back to an old topic but since it has presently been possible to get credits for 2010 IOTA contest by uploading the Cabrillo log I had to bring it up again. Uploading cabrillo logs is a way to get credits for contacts that not have been QSLed. If tagging S or C in the award fields they will not be recognised unless these contacts have a confirmation either from a card or LotW. It is not possible to claim IOTA credits from contacts confirmed through LotW. Since contacts made during the IOTA contest are accepted as credits by RGSB without any cards, if both stations have entered their logs, it is not possible to keep track of the IOTA award in DX4WIN. The same problem is true for Russian oblast award, since contacts made during RDXC could be used to claim credits. I sincerely hope this will be changed in the next version. 73 de Mel – SM0MPV 8S0C – Contest Call __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] Confirmed or Checked
Hello, I have just started to compile cards for IOTA award. This is one award program where QSL may not be necessary. Island worked during IOTA contest will account, if logs are sent in and match. When checking these contacts submitted (S) they may not turn up as S when examine IOTA worked but as C, M or W. It seems like QSL status overrules award status. This means that a contact could be C and it may either be confirmed or checked. I would prefer the award status overrules the QSL status for those awards accepting contacts made during contests (IOTA, RDA). It would be good if not the same letter is used. 73 de Mel – SM0MPV 8S0C Contest Call __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] Tracking IOTA and RDA
Hi all, I will try to explain my self a little bit better. If I have a QSL card and mark the contact as either submitted (S) or checked (C) in the award box, it turns up in the listing as S or *, respectively. However, if the contact is just confirmed via the contest and no cards are available the program just ignores the settings in the Award box. So a contact that I have made during the IOTA contest and not have had a QSL-card from will turn up as W or M if this was the only contact or if neither of the other contacts with that island have been confirmed with a card. If I have worked another station from this Island and got a card there will be a C for confirmed in the listing. It seems like QSL status overrules Award status. This makes it difficult to track awards like IOTA and RDA where contacts made during the contests are accepted. 73 de Mel - SM0MPV 8S0C Contest Call __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] Confirmed or Checked
Hello, I have just started to compile cards for IOTA award. This is one award program where QSL may not be necessary. Island worked during IOTA contest will account, if logs are sent in and match. When checking these contacts submitted (S) they may not turn up as S when examine IOTA worked but as C, M or W. It seems like QSL status overrules award status. This means that a contact could be C and it may either be confirmed or checked. I would prefer the award status overrules the QSL status for those awards accepting contacts made during contests (IOTA, RDA). It would be good if not the same letter is used. 73 de Mel – SM0MPV 8S0C Contest Call __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] Asiactic Russian stations in European part = UA9
Hi, I checked my logs and found that all (i.e. 3) Asiatic Russian station that operated /3 or /6 in the European part of Russia (RV9FQ/6, RA0CCV/3 and UA0QJE/3) were registered as UA9 in the log. This was the only ones I got . When adding e.g. UA9ABC/4 it was loged as UA9. This was also true for UA9ABC/2, so it seems to be a bug. 73 de Mel - SM0MPV 8S0C Contest Call __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] Problems with F-keys
Hello All, I have a strange problem. It is not possible to use the F.keys in the DX4WIN log program. It is possible in all other programs and in the MMTTY window. Is it possible to turn off the F-keys? This problem started when I tried to configure RTTY and PSK. I am using Windows XP version 2002 SP3 and DX4WIN 8.04 Cheers Mel - SM0MPV 8S0C Contest call __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] Problem with F keys
Hello All, I have a strange problem. It is not possible to use the F.keys in DX4WIN logprogram. It is possuble in all othert programs and in the MMTTY window. Is it possible to turn off the F-keys? This problem started when I tried to configure RTTY and PSK. I am using Windows XP version 2002 SP3 and DX4WIN 8.04 CVheers Mel - SM0MPV 8S0C Contest call __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] F-keys problem
Hello All, I have a strange problem. It is not possible to use the F.keys in DX4WIN log program. It is possible in all other programs and in the MMTTY window. Is it possible to turn off the F-keys? This problem started when I tried to configure RTTY and PSK. I am using Windows XP version 2002 SP3 and DX4WIN 8.04 Cheers Mel - SM0MPV 8S0C Contest call __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] rx frequency in note for this qso field
Greetings to you all, When I import an ADIF file from N1MM after a contes, I always get the frequency in it's field but also rx frequency in the note for this qso field. Is it possible to remove this note in all QSOs in a simple maner? Sometimes I work without the computor connected to the rig. N1MM always keep track of the frequency and needs to have one to work. The frequency will be imported together wit the rest of the information. Is it possible to import QSOs from N1MM and omitt the frequency in the import? Best regards Mel - SM0MPV 8S0C contest call __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] Letter changes
Hi All, I have a strange problem. When I write my log to file, all ö, á, ô and other letters with signs on their top become some strange Chinese signs or questionmark. When I export the log as ADIF and check it all signs are as the should in the ADIF file. However, when importing it to DX4WIN and then again write log to file the strange signs turn up. Even more strange is that this is just true for part of the log, it works very well with the other part. What should I do to correct my file? 73 de Mel - SM0MPV Contest caLL 8S0C __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
