[Dx4win] ADIF V2.19
Jim found the source of the ADIF problem. It was NOT related to a fault in DX4WIN. The source of the ADIF issue was the pass-thru program I used to automatically populate grid, state, county, address, etc. by looking up the information from QRZ.COM and saving a lot of tedious work. 73, Bud W3LL __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] ADIF V2.19
I would need to see the EXACT message. I've never seen such a message when I uploaded logs to eQSL. I would hope that the error message had more detail about what modes it thought were illegal. 73 - Jim AD1C On Mon, Aug 23, 2010 at 6:54 AM, Bud Governale, W3LL wrote: > The upload modes were a combination of RTTY and SSB. The version of DX4WIN > was 8.04. > > I had no trouble with the upload. It appeared to go well. > > I was just curious about the eQSL upload statement at the bottom of the > results page about the ADIF version spec non > compliance. > > 73, > > Bud W3LL > > - Original Message - > From: "Jim Reisert AD1C" > To: "Bud Governale, W3LL" > Cc: > Sent: Sunday, August 22, 2010 9:49 PM > Subject: Re: [Dx4win] ADIF V2.19 > > > On 8/22/2010 4:40 PM, Bud Governale, W3LL wrote: > >> I saw the following statement when I uploaded QSO's to eQSL. >> Is DX4WIN in compliance with the spec? >> >> "Logger not compliant with ADIF V2.1.9 specs due to invalid mode(s) >> Logger identified as: DX4WIN" > > What was the mode that it complained about, and what version of DX4WIN > were you using? I have had NO trouble uploading to LoTW and eQSL using > 7.07 and 8.0x. Note that "PSK" is *not* an ADIF mode, you must choose > PSK31 (or PSK63 if it's available). This is a common mistake. -- Jim Reisert AD1C, , http://www.ad1c.us __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] ADIF V2.19
The upload modes were a combination of RTTY and SSB. The version of DX4WIN was 8.04. I had no trouble with the upload. It appeared to go well. I was just curious about the eQSL upload statement at the bottom of the results page about the ADIF version spec non compliance. 73, Bud W3LL - Original Message - From: "Jim Reisert AD1C" To: "Bud Governale, W3LL" Cc: Sent: Sunday, August 22, 2010 9:49 PM Subject: Re: [Dx4win] ADIF V2.19 On 8/22/2010 4:40 PM, Bud Governale, W3LL wrote: > I saw the following statement when I uploaded QSO's to eQSL. > Is DX4WIN in compliance with the spec? > > "Logger not compliant with ADIF V2.1.9 specs due to invalid mode(s) > Logger identified as: DX4WIN" What was the mode that it complained about, and what version of DX4WIN were you using? I have had NO trouble uploading to LoTW and eQSL using 7.07 and 8.0x. Note that "PSK" is *not* an ADIF mode, you must choose PSK31 (or PSK63 if it's available). This is a common mistake. 73 - Jim AD1C -- Jim Reisert AD1C, , http://www.ad1c.us __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] ADIF V2.19
On 8/22/2010 7:53 PM, cw...@juno.com wrote: > Jim, are you saying that each PSK QSO has to be manually changed before > uploading? What I am saying is that if you logged QSOs as "PSK" mode, then you will have problems. They have to be PSK31 (or PSK63 or PSK125) for the QSOs to export correctly as ADIF. The "PSK" mode was removed in 8.0x. 73 - Jim AD1C > -- Original Message -- > From: Jim Reisert AD1C > To: "Bud Governale, W3LL" > Cc: dx4win@mailman.qth.net > Subject: Re: [Dx4win] ADIF V2.19 > Date: Sun, 22 Aug 2010 19:49:07 -0600 > > On 8/22/2010 4:40 PM, Bud Governale, W3LL wrote: > > > I saw the following statement when I uploaded QSO's to eQSL. > > Is DX4WIN in compliance with the spec? > > > > "Logger not compliant with ADIF V2.1.9 specs due to invalid mode(s) > > Logger identified as: DX4WIN" > > What was the mode that it complained about, and what version of DX4WIN > were you using? I have had NO trouble uploading to LoTW and eQSL using > 7.07 and 8.0x. Note that "PSK" is *not* an ADIF mode, you must choose > PSK31 (or PSK63 if it's available). This is a common mistake. > > 73 - Jim AD1C -- Jim Reisert AD1C, , http://www.ad1c.us __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] ADIF V2.19
Jim, are you saying that each PSK QSO has to be manually changed before uploading? 73, Fred/NA2U -- CWMAN...I'D RATHER WORK CW!!! Yeah...but it's a DRY heat. "Wretched excess is just barely enough." -- Mario Batali (from Heat by Bill Buford) -- Original Message -- From: Jim Reisert AD1C To: "Bud Governale, W3LL" Cc: dx4win@mailman.qth.net Subject: Re: [Dx4win] ADIF V2.19 Date: Sun, 22 Aug 2010 19:49:07 -0600 On 8/22/2010 4:40 PM, Bud Governale, W3LL wrote: > I saw the following statement when I uploaded QSO's to eQSL. > Is DX4WIN in compliance with the spec? > > "Logger not compliant with ADIF V2.1.9 specs due to invalid mode(s) > Logger identified as: DX4WIN" What was the mode that it complained about, and what version of DX4WIN were you using? I have had NO trouble uploading to LoTW and eQSL using 7.07 and 8.0x. Note that "PSK" is *not* an ADIF mode, you must choose PSK31 (or PSK63 if it's available). This is a common mistake. 73 - Jim AD1C -- Jim Reisert AD1C, , http://www.ad1c.us __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Refinance Now 3.7% FIXED $160,000 Mortgage for $547/mo. FREE. No Obligation. Get 4 Quotes! http://thirdpartyoffers.juno.com/TGL3141/4c71d4ddeaf21818eefst04vuc __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] ADIF V2.19
On 8/22/2010 4:40 PM, Bud Governale, W3LL wrote: > I saw the following statement when I uploaded QSO's to eQSL. > Is DX4WIN in compliance with the spec? > > "Logger not compliant with ADIF V2.1.9 specs due to invalid mode(s) > Logger identified as: DX4WIN" What was the mode that it complained about, and what version of DX4WIN were you using? I have had NO trouble uploading to LoTW and eQSL using 7.07 and 8.0x. Note that "PSK" is *not* an ADIF mode, you must choose PSK31 (or PSK63 if it's available). This is a common mistake. 73 - Jim AD1C -- Jim Reisert AD1C, , http://www.ad1c.us __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] ADIF V2.19
I saw the following statement when I uploaded QSO's to eQSL. Is DX4WIN in compliance with the spec? "Logger not compliant with ADIF V2.1.9 specs due to invalid mode(s) Logger identified as: DX4WIN" __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
