[Dx4win] QSL Printing Directly to Cards
Hi Folks, I need to say Thank You to Paul!!! Of course it was a setting on one of my definitions! Humility is humbling! TNX for the support! Will NA2NA - Original Message - From: "William Liporace - NA2NA" <[EMAIL PROTECTED]> To: "DX4WIN POSTINGS" Sent: Friday, April 11, 2003 7:57 PM Subject: Re: [Dx4win] QSL Printing Directly to Cards > I guess there is still something that I am not expressing or that does not > work. I was told by one person to try print Labels | QSL Labels in Sequence: > This equals 0 > Paul suggested Labels Print QSL Labels | Print | Preview. This will show me > what is there is 154 cards out of all of my QSOs. When I look at one > specific card, I have 61 cards and only 1 is there. I have another that > shows 1 and none print. > So what ever is going on.. it is not right. At this point, I am getting real > frustrated with DX4Win. > > TNX for any suggestions!! Will NA2NA > > - Original Message - > From: "Paul van der Eijk" <[EMAIL PROTECTED]> > To: "William Liporace - NA2NA" <[EMAIL PROTECTED]>; "DX4WIN POSTINGS" > > Sent: Thursday, April 10, 2003 10:54 PM > Subject: Re: [Dx4win] QSL Printing Directly to Cards > > > > Will, > > > > When you do an EDIT | Preview, you get enough to see what is going on > > using dummy data. > > > > When you PRINT, you can also select a preview, which will use all > available > > real data to show what will happen. > > > > Does that explain what you observe? > > > > Paul > > > > At 10:10 PM 4/10/03 -0400, William Liporace - NA2NA wrote: > > >Hi Folks, > > >I have not done much QSLing in a long time. I am home for a few days and > > >wanted to get caught back up. I have used the same QSL Cards and printer > for > > >a long time. I have the same paper definition for the QSL card. When I go > > >into Labels | Print QSL Labels | QSL Method | (Pick a method). I have one > > >that has 61 QSOs listed, but it only prints one card. The one that has 1 > > >does not print the card. I did not want to do my buro list (way too many, > > >but I will print them this weekend..maybe) yet. > > >When I go to Edit | Preview and print, the demo two cards work just fine. > > >The menu on the Top says # of QSOs, but I do not seem to get all of the > > >cards to show up in the print preview. > > >What am I doing wrong?? > > > > > >TNX Will NA2NA > > > > > >___ > > >Dx4win mailing list > > >Dx4win@mailman.qth.net > > >http://mailman.qth.net/mailman/listinfo/dx4win > > > > > > Paul van der Eijk (KK4HD) > > [EMAIL PROTECTED] > > http://www.dx4win.com > > > > ___ > > Dx4win mailing list > > Dx4win@mailman.qth.net > > http://mailman.qth.net/mailman/listinfo/dx4win > > ___ > Dx4win mailing list > Dx4win@mailman.qth.net > http://mailman.qth.net/mailman/listinfo/dx4win
[Dx4win] QSL Printing Directly to Cards
I guess there is still something that I am not expressing or that does not work. I was told by one person to try print Labels | QSL Labels in Sequence: This equals 0 Paul suggested Labels Print QSL Labels | Print | Preview. This will show me what is there is 154 cards out of all of my QSOs. When I look at one specific card, I have 61 cards and only 1 is there. I have another that shows 1 and none print. So what ever is going on.. it is not right. At this point, I am getting real frustrated with DX4Win. TNX for any suggestions!! Will NA2NA - Original Message - From: "Paul van der Eijk" <[EMAIL PROTECTED]> To: "William Liporace - NA2NA" <[EMAIL PROTECTED]>; "DX4WIN POSTINGS" Sent: Thursday, April 10, 2003 10:54 PM Subject: Re: [Dx4win] QSL Printing Directly to Cards > Will, > > When you do an EDIT | Preview, you get enough to see what is going on > using dummy data. > > When you PRINT, you can also select a preview, which will use all available > real data to show what will happen. > > Does that explain what you observe? > > Paul > > At 10:10 PM 4/10/03 -0400, William Liporace - NA2NA wrote: > >Hi Folks, > >I have not done much QSLing in a long time. I am home for a few days and > >wanted to get caught back up. I have used the same QSL Cards and printer for > >a long time. I have the same paper definition for the QSL card. When I go > >into Labels | Print QSL Labels | QSL Method | (Pick a method). I have one > >that has 61 QSOs listed, but it only prints one card. The one that has 1 > >does not print the card. I did not want to do my buro list (way too many, > >but I will print them this weekend..maybe) yet. > >When I go to Edit | Preview and print, the demo two cards work just fine. > >The menu on the Top says # of QSOs, but I do not seem to get all of the > >cards to show up in the print preview. > >What am I doing wrong?? > > > >TNX Will NA2NA > > > >___ > >Dx4win mailing list > >Dx4win@mailman.qth.net > >http://mailman.qth.net/mailman/listinfo/dx4win > > > Paul van der Eijk (KK4HD) > [EMAIL PROTECTED] > http://www.dx4win.com > > ___ > Dx4win mailing list > Dx4win@mailman.qth.net > http://mailman.qth.net/mailman/listinfo/dx4win
[Dx4win] QSL Printing Directly to Cards
But the card counts do not match!! In the Directs I have 61 cards according to the top count, when I preview or print I have only 6. Hell I have more than that stateside When I open Print QSLs and change nothing it shows me 2075 cards, when I do a Print | Preview it only gives me 154... Will - Original Message - From: "Paul van der Eijk" <[EMAIL PROTECTED]> To: "William Liporace - NA2NA" <[EMAIL PROTECTED]>; "DX4WIN POSTINGS" Sent: Thursday, April 10, 2003 10:54 PM Subject: Re: [Dx4win] QSL Printing Directly to Cards > Will, > > When you do an EDIT | Preview, you get enough to see what is going on > using dummy data. > > When you PRINT, you can also select a preview, which will use all available > real data to show what will happen. > > Does that explain what you observe? > > Paul > > At 10:10 PM 4/10/03 -0400, William Liporace - NA2NA wrote: > >Hi Folks, > >I have not done much QSLing in a long time. I am home for a few days and > >wanted to get caught back up. I have used the same QSL Cards and printer for > >a long time. I have the same paper definition for the QSL card. When I go > >into Labels | Print QSL Labels | QSL Method | (Pick a method). I have one > >that has 61 QSOs listed, but it only prints one card. The one that has 1 > >does not print the card. I did not want to do my buro list (way too many, > >but I will print them this weekend..maybe) yet. > >When I go to Edit | Preview and print, the demo two cards work just fine. > >The menu on the Top says # of QSOs, but I do not seem to get all of the > >cards to show up in the print preview. > >What am I doing wrong?? > > > >TNX Will NA2NA > > > >___ > >Dx4win mailing list > >Dx4win@mailman.qth.net > >http://mailman.qth.net/mailman/listinfo/dx4win > > > Paul van der Eijk (KK4HD) > [EMAIL PROTECTED] > http://www.dx4win.com >
[Dx4win] QSL Printing Directly to Cards
Will, When you do an EDIT | Preview, you get enough to see what is going on using dummy data. When you PRINT, you can also select a preview, which will use all available real data to show what will happen. Does that explain what you observe? Paul At 10:10 PM 4/10/03 -0400, William Liporace - NA2NA wrote: >Hi Folks, >I have not done much QSLing in a long time. I am home for a few days and >wanted to get caught back up. I have used the same QSL Cards and printer for >a long time. I have the same paper definition for the QSL card. When I go >into Labels | Print QSL Labels | QSL Method | (Pick a method). I have one >that has 61 QSOs listed, but it only prints one card. The one that has 1 >does not print the card. I did not want to do my buro list (way too many, >but I will print them this weekend..maybe) yet. >When I go to Edit | Preview and print, the demo two cards work just fine. >The menu on the Top says # of QSOs, but I do not seem to get all of the >cards to show up in the print preview. >What am I doing wrong?? > >TNX Will NA2NA > >___ >Dx4win mailing list >Dx4win@mailman.qth.net >http://mailman.qth.net/mailman/listinfo/dx4win Paul van der Eijk (KK4HD) [EMAIL PROTECTED] http://www.dx4win.com
[Dx4win] QSL Printing Directly to Cards
Hi Folks, I have not done much QSLing in a long time. I am home for a few days and wanted to get caught back up. I have used the same QSL Cards and printer for a long time. I have the same paper definition for the QSL card. When I go into Labels | Print QSL Labels | QSL Method | (Pick a method). I have one that has 61 QSOs listed, but it only prints one card. The one that has 1 does not print the card. I did not want to do my buro list (way too many, but I will print them this weekend..maybe) yet. When I go to Edit | Preview and print, the demo two cards work just fine. The menu on the Top says # of QSOs, but I do not seem to get all of the cards to show up in the print preview. What am I doing wrong?? TNX Will NA2NA