Re: [Dx4win] Printing labels for newly received Bureau QSL cards.

[k7acz]

Maybe not the best way to do it but when I have that situation I go to
the QSO's that I want to print and place a note in the NOTES FOR THIS
QSO such as Rcvd from BURO 1/2/23. You only need to type this once,
then use CTL+C to copy the note to the rest of the QSL's you want to
print. So what you are doing is to find the QSL's to print (one by
one), In the label box place Y, place BURO in the method box, the do
the CTL+C to put your note in the NOTES FOR THIS QSO box. Then do a F8
search for this note you made (in this example Rcvd from BURO 1/2/23).
The search will only find the QSO's you marked as Rcvd from BURO
1/2/23 and you can now print only those QSL's in question. You also
have a notation of when and how you received the incoming QSL that you
did not have before.
73
Alan K7ACZ

-Original Message-
From: dx4win-boun...@mailman.qth.net 
On Behalf Of Jim Pyle
Sent: Saturday, January 28, 2023 11:25 AM
To: WA7AA 
Cc: dx4win@mailman.qth.net
Subject: Re: [Dx4win] Printing labels for newly received Bureau QSL
cards.

Zoran,

Thanks for the suggestions.  I confirmed Label and Cnfm boxes were
checked "Y" and entered the QSL Date.  I was able to search for the
QSL Date, retrieve the data and print the labels.

73, Jim,  AA8OY

On Fri, Jan 27, 2023 at 8:50 PM WA7AA  wrote:

> On 27-Jan-23 16:48, Jim Pyle wrote:
> > Today I received an envelope of cards of which about 20-30
requested 
> > QSL cards in return.  I went into DX4WIN and changed the N to Y in

> > the Label Cnfm box for the cards in question.  Now, the problem is

> > to print labels for just the cards I entered today.  I don't think
I 
> > can use Selection to create a group of these cards because the log

> > has about 55,000 entries
> and
> > the dates on the cards range from1997 into 2021.
> First make sure you checked the correct checkboxes for confirming a 
> QSO with a QSL card. There is no such thing as a Label Cnfm box - 
> there are two separate checkboxes: the one called Label is used to 
> mark the QSO in order to send out a paper QSL card to the station 
> worked, while the other one, called Cnfm is used to mark a QSO for 
> having received a paper QSL card. I apologize if I'm stating the 
> obvious, but the reason I mention this is due to this:
> > I don't want to erase
> > existing "Y" Cnfm for the 29,000+ QSOs that have it.  Anyone
having 
> > suggestions on how to print labels would be welcomed!
>
> Presumably, you have 29 thousand QSLs i.e. confirmed QSOs and if so,

> they have nothing to do with needing to print QSL labels that are 
> selected by checking the Label box. Don't mess with them or you may 
> wipe out your confirmation statistics and re-confirming 29 thousand 
> entries manually is not something you'd want to attempt. If you
filter 
> by the Label=Y, the Report:Loogbook window will display only the
QSOs 
> marked for label printing.
>
> When I want to print only a select few of the labels marked for 
> printing, I usually set each QSO with Set QSL Date to today's date
one 
> at a time. When you now filter for Label=Y and QSL Date=01-27-2023, 
> the Report:Loogbook window should display only those QSOs you want
to 
> print labels for. Go to QSL and select Print QSL Labels. When done, 
> don't forget to clear Label flags and you're all set.
>
> 73,
>
> Zoran WA7AA

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Printing labels for newly received Bureau QSL cards.

[Jim Pyle]

Zoran,

Thanks for the suggestions.  I confirmed Label and Cnfm boxes were checked
"Y" and entered the QSL Date.  I was able to search for the QSL Date,
retrieve the data and print the labels.

73, Jim,  AA8OY

On Fri, Jan 27, 2023 at 8:50 PM WA7AA  wrote:

> On 27-Jan-23 16:48, Jim Pyle wrote:
> > Today I received an envelope of cards of which about 20-30 requested QSL
> > cards in return.  I went into DX4WIN and changed the N to Y in the Label
> > Cnfm box for the cards in question.  Now, the problem is to print labels
> > for just the cards I entered today.  I don't think I can use Selection to
> > create a group of these cards because the log has about 55,000 entries
> and
> > the dates on the cards range from1997 into 2021.
> First make sure you checked the correct checkboxes for confirming a QSO
> with a QSL card. There is no such thing as a Label Cnfm box - there are
> two separate checkboxes: the one called Label is used to mark the QSO in
> order to send out a paper QSL card to the station worked, while the
> other one, called Cnfm is used to mark a QSO for having received a paper
> QSL card. I apologize if I'm stating the obvious, but the reason I
> mention this is due to this:
> > I don't want to erase
> > existing "Y" Cnfm for the 29,000+ QSOs that have it.  Anyone having
> > suggestions on how to print labels would be welcomed!
>
> Presumably, you have 29 thousand QSLs i.e. confirmed QSOs and if so,
> they have nothing to do with needing to print QSL labels that are
> selected by checking the Label box. Don't mess with them or you may wipe
> out your confirmation statistics and re-confirming 29 thousand entries
> manually is not something you'd want to attempt. If you filter by the
> Label=Y, the Report:Loogbook window will display only the QSOs marked
> for label printing.
>
> When I want to print only a select few of the labels marked for
> printing, I usually set each QSO with Set QSL Date to today's date one
> at a time. When you now filter for Label=Y and QSL Date=01-27-2023, the
> Report:Loogbook window should display only those QSOs you want to print
> labels for. Go to QSL and select Print QSL Labels. When done, don't
> forget to clear Label flags and you're all set.
>
> 73,
>
> Zoran WA7AA
>
> __
> DX4WIN mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:DX4WIN@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Printing labels for newly received Bureau QSL cards.

[WA7AA]

On 27-Jan-23 16:48, Jim Pyle wrote:

Today I received an envelope of cards of which about 20-30 requested QSL
cards in return.  I went into DX4WIN and changed the N to Y in the Label
Cnfm box for the cards in question.  Now, the problem is to print labels
for just the cards I entered today.  I don't think I can use Selection to
create a group of these cards because the log has about 55,000 entries and
the dates on the cards range from1997 into 2021.
First make sure you checked the correct checkboxes for confirming a QSO 
with a QSL card. There is no such thing as a Label Cnfm box - there are 
two separate checkboxes: the one called Label is used to mark the QSO in 
order to send out a paper QSL card to the station worked, while the 
other one, called Cnfm is used to mark a QSO for having received a paper 
QSL card. I apologize if I'm stating the obvious, but the reason I 
mention this is due to this:

I don't want to erase
existing "Y" Cnfm for the 29,000+ QSOs that have it.  Anyone having
suggestions on how to print labels would be welcomed!


Presumably, you have 29 thousand QSLs i.e. confirmed QSOs and if so, 
they have nothing to do with needing to print QSL labels that are 
selected by checking the Label box. Don't mess with them or you may wipe 
out your confirmation statistics and re-confirming 29 thousand entries 
manually is not something you'd want to attempt. If you filter by the 
Label=Y, the Report:Loogbook window will display only the QSOs marked 
for label printing.


When I want to print only a select few of the labels marked for 
printing, I usually set each QSO with Set QSL Date to today's date one 
at a time. When you now filter for Label=Y and QSL Date=01-27-2023, the 
Report:Loogbook window should display only those QSOs you want to print 
labels for. Go to QSL and select Print QSL Labels. When done, don't 
forget to clear Label flags and you're all set.


73,

Zoran WA7AA

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Printing labels

[Wayne M]

Eric,

Do you have an older copy of DX4W like 8.05? Using that got labels to 
edit and print properly.


73

Wayne

On 3/24/2020 1:13 PM, Eric Rosenberg wrote:

I've had the same problem.

I use a Brother  QL-550 printer.

The labels I use are DK-1201 (1-7/8" x 3 ½” / (29mm x 90.3mm) and 
DK-1209 (1/-1/7" 2-3/7" - 28.9mm x 62mm).


I can't get DX4Win to print correctly. I worked with Paul with no 
success.


Any suggestions? An outboard driver or separate program for printing 
these labels (BV)?


73,
Eric W3DQ



--

Message: 3
Date: Tue, 24 Mar 2020 08:22:25 -0400
From: Wayne M 
To: dx4win@mailman.qth.net
Subject: [Dx4win] Printing labels
Message-ID: <64498887-a812-cf29-f097-7ea3385d5...@gmail.com>
Content-Type: text/plain; charset=utf-8; format=flowed

Hi All,

I now have a Dymo 450 Turbo LabelWriter. I've been try to print labels
from DX4W as I have in the past with Avery labels.

After a lot of experimenting I've come to the conclusion the label
editing for size is not working. No matter what I put in the editor the
report box is still to long for the standard 2 1/4 x 1 1/4 Dymo label.
On Jim's web site there is an app note for Dymo printing which I've been
trying to work with and brought me to this conclusion.

Has anyone else found this out and have you found a work around?

Is there a way to print labels to a CSV file that could be imported to
LabelWriter?

Thanks,

Wayne?? WA1PMA


__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Printing labels

[Eric Rosenberg]

I've had the same problem.

I use a Brother  QL-550 printer.

The labels I use are DK-1201 (1-7/8" x 3 ½” / (29mm x 90.3mm) and 
DK-1209 (1/-1/7" 2-3/7" - 28.9mm x 62mm).


I can't get DX4Win to print correctly. I worked with Paul with no 
success.


Any suggestions? An outboard driver or separate program for printing 
these labels (BV)?


73,
Eric W3DQ



--

Message: 3
Date: Tue, 24 Mar 2020 08:22:25 -0400
From: Wayne M 
To: dx4win@mailman.qth.net
Subject: [Dx4win] Printing labels
Message-ID: <64498887-a812-cf29-f097-7ea3385d5...@gmail.com>
Content-Type: text/plain; charset=utf-8; format=flowed

Hi All,

I now have a Dymo 450 Turbo LabelWriter. I've been try to print labels
from DX4W as I have in the past with Avery labels.

After a lot of experimenting I've come to the conclusion the label
editing for size is not working. No matter what I put in the editor the
report box is still to long for the standard 2 1/4 x 1 1/4 Dymo label.
On Jim's web site there is an app note for Dymo printing which I've been
trying to work with and brought me to this conclusion.

Has anyone else found this out and have you found a work around?

Is there a way to print labels to a CSV file that could be imported to
LabelWriter?

Thanks,

Wayne?? WA1PMA


__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Printing Labels

[Wayne M]

Hi Guy,

This converts to the same size label I'm using ref number 30334 which is 
2 1/4 x 1 1/4 inches. I'm guessing you made this custom label in an 
earlier version of DX4W? I may try reloading an older version of DX4WIN 
and see if the editor works there.


73

Wayne   WA1PMA

On 3/24/2020 9:37 AM, ON4AOI wrote:


Wayne,

I have a Labelwriter Duo from Dymo for years now printing the labels 
perfect.


My guess is that something is not setup correct in the label editor

Below is my setup

I made Custom5 for the Labels I have in stock now,

these units are in mm now but you can switch in Units and this would

be very close to what you have for labels (dymo reference = 11354)

A screenshot of a cell phone Description automatically generated

Guy ON4AOI – OT7K


__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Printing labels

[Kostas SV1DPI]

Please visit my notes in the following page

https://www.qsl.net/sv1dpi/en/dx4win/printqsos.html

Try and print on a blank sheet first. Put it under the light with the 
labels sheet, see and correct the differences.


73 Kostas SV1DPI

Στις 24/3/2020 14:22, ο Wayne M έγραψε:

Hi All,

I now have a Dymo 450 Turbo LabelWriter. I've been try to print labels 
from DX4W as I have in the past with Avery labels.


After a lot of experimenting I've come to the conclusion the label 
editing for size is not working. No matter what I put in the editor 
the report box is still to long for the standard 2 1/4 x 1 1/4 Dymo 
label. On Jim's web site there is an app note for Dymo printing which 
I've been trying to work with and brought me to this conclusion.


Has anyone else found this out and have you found a work around?

Is there a way to print labels to a CSV file that could be imported to 
LabelWriter?


Thanks,

Wayne   WA1PMA

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Printing Labels in Sequence

[Eric Rosenberg]

Kostas - 

 

No, they're all unconfirmed. And no, they're all use the same outgoing
method.

 

We're all speculating and no one other than Paul knows how this can be done.
I cannot get "Print In Sequence Order" (that's not the exact working of the
button) to work. 

 

This is very frustrating, and disappointing. 

 

Eric 

 

--

Date: Sat, 3 Mar 2018 22:47:05 +0200

From: kostas sv1dpi mailto:sv1...@otenet.gr> >

To: dx4win@mailman.qth.net <mailto:dx4win@mailman.qth.net> 

Subject: Re: [Dx4win] Printing Labels in Sequence?

 

Have in mind that if some of the QSOs are confirmed will be printed with a
tnx and the rest (not confirmed) with a pse. Also if in some of the QSOs the
method (buro, direct, etc) is different, will be printed in different
labels. Is this the case?

 

73 Kostas SV1DPI

 

 3/3/2018 22:20, ? Eric Rosenberg ??:

> Dave,

> 

> Thanks, but this isn't what I'm looking to do.

> 

> I want to the QSOs to be printed in chronological order from the first 

> QSO on the first label to the last (most recent) as the last QSO on 

> the last label.

> 

> As things stand, the printing order is somewhat arbitrary.

> 

> In one case of 7 QSOs to the same callsign, there are three labels -- 

> one label has one QSO, another has two and the third has four. The 

> QSOs on both the second and third label are not in order.

> 

> How do I remedy that?

> 

> 73,

> Eric W3DQ

> 

 

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to arch...@mail-archive.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Printing Labels in Sequence?

[kostas sv1dpi]

Have in mind that if some of the QSOs are confirmed will be printed with 
a tnx and the rest (not confirmed) with a pse. Also if in some of the 
QSOs the method (buro, direct, etc) is different, will be printed in 
different labels. Is this the case?


73 Kostas SV1DPI

Στις 3/3/2018 22:20, ο Eric Rosenberg έγραψε:

Dave,

Thanks, but this isn't what I'm looking to do.

I want to the QSOs to be printed in chronological order from the first QSO
on the first label to the last (most recent) as the last QSO on the last
label.

As things stand, the printing oprder is somewhat arbitrary.

In one case of 7 QSOs to the same callsign, there are three labels -- one
label has one QSO, another has two and the third has four. The QSOs on both
the second and third label are not in order.

How do I remedy that?

73,
Eric W3DQ

-Original Message-
From: N4QS, Dave Perry 
Sent: Saturday, March 03, 2018 7:21 AM
To: 'Eric Rosenberg' ; 'DX4Win Reflector'

Subject: RE: [Dx4win] Printing Labels in Sequence?

Eric,

Click F8, type in station call sign, hit enter All QSOs with that station
will be displayed in logbook window Click QSLs tab, Set QSL Label flag,
follow prompts Click Print QSL labels under same QSLs tab Select the custom
label that you would like to use Uncheck most Print options (Group Names,
Method Labels, etc.)  I only use Print Via Manager Click on Edit and review
format Multiple QSOs should be showing in the preview You can uncheck
Commercial to free up more space for QSOs Go back to main Print QSL labels
pop up window Click on Print, follow prompts Labels should print

I can normally get up to 4 QSOs to print on one label.

Hope this helps.

Trying to work 3D2ER on 160M while I type this!

73,

Dave





-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of Eric Rosenberg
Sent: Saturday, March 03, 2018 12:53 AM
To: DX4Win Reflector 
Subject: [Dx4win] Printing Labels in Sequence?

I can't get this to work.

I have multiple QSOs with a single station, and would like to print labels,
each with multiple QSOs in chronological order.

How do I do that?

73,
Eric W3DQ
__


__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to sv1...@otenet.gr

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html


__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to arch...@mail-archive.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Printing Labels in Sequence?

[Eric Rosenberg]

Dave,

Thanks, but this isn't what I'm looking to do. 

I want to the QSOs to be printed in chronological order from the first QSO
on the first label to the last (most recent) as the last QSO on the last
label.  

As things stand, the printing oprder is somewhat arbitrary. 

In one case of 7 QSOs to the same callsign, there are three labels -- one
label has one QSO, another has two and the third has four. The QSOs on both
the second and third label are not in order.

How do I remedy that? 

73,
Eric W3DQ  

-Original Message-
From: N4QS, Dave Perry  
Sent: Saturday, March 03, 2018 7:21 AM
To: 'Eric Rosenberg' ; 'DX4Win Reflector'

Subject: RE: [Dx4win] Printing Labels in Sequence?

Eric,

Click F8, type in station call sign, hit enter All QSOs with that station
will be displayed in logbook window Click QSLs tab, Set QSL Label flag,
follow prompts Click Print QSL labels under same QSLs tab Select the custom
label that you would like to use Uncheck most Print options (Group Names,
Method Labels, etc.)  I only use Print Via Manager Click on Edit and review
format Multiple QSOs should be showing in the preview You can uncheck
Commercial to free up more space for QSOs Go back to main Print QSL labels
pop up window Click on Print, follow prompts Labels should print

I can normally get up to 4 QSOs to print on one label.

Hope this helps.

Trying to work 3D2ER on 160M while I type this!

73,

Dave





-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of Eric Rosenberg
Sent: Saturday, March 03, 2018 12:53 AM
To: DX4Win Reflector 
Subject: [Dx4win] Printing Labels in Sequence?

I can't get this to work.

I have multiple QSOs with a single station, and would like to print labels,
each with multiple QSOs in chronological order.

How do I do that?

73,
Eric W3DQ
__


__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to arch...@mail-archive.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Printing Labels in Sequence?

[N4QS, Dave Perry]

Eric,

Click F8, type in station call sign, hit enter
All QSOs with that station will be displayed in logbook window
Click QSLs tab, Set QSL Label flag, follow prompts
Click Print QSL labels under same QSLs tab
Select the custom label that you would like to use
Uncheck most Print options (Group Names, Method Labels, etc.)  I only use
Print Via Manager
Click on Edit and review format
Multiple QSOs should be showing in the preview
You can uncheck Commercial to free up more space for QSOs
Go back to main Print QSL labels pop up window
Click on Print, follow prompts
Labels should print

I can normally get up to 4 QSOs to print on one label.

Hope this helps.

Trying to work 3D2ER on 160M while I type this!

73,

Dave





-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of Eric Rosenberg
Sent: Saturday, March 03, 2018 12:53 AM
To: DX4Win Reflector 
Subject: [Dx4win] Printing Labels in Sequence?

I can't get this to work.

I have multiple QSOs with a single station, and would like to print labels,
each with multiple QSOs in chronological order.

How do I do that?

73,
Eric W3DQ
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to n...@vci.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to arch...@mail-archive.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] printing labels

[Kostas SV1DPI]

make your printing fonts smaller.

...73 de Kostas SV1DPI
  (One of SZ1A-EP6T)

Στις 11/1/2018 2:27 μμ, ο ROBERT GARCEAU έγραψε:

Is the latest version of DX4WIN 9.0.4.1176?
I thought I saw a note on the reflector that the label printing had been fixed.
I noticed some improvement. The mode portion of the label is printing better.I 
was printing just a sliver of the mode, now for example I print FT and can't 
see the 8
Bob, W1EQ
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to sv1...@otenet.gr

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html


__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to arch...@mail-archive.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] printing labels still again..

[bob]

One other thing I really like that Mike pointed out is the setup of 
preferences

go to F2 setup. He told me to set "QSO selection after F2 key"
Selected "Specify new QSO Filter"
NOW no more F8 after the F2

All verified label printing working good now.

de Kr4da Bob

On 3/18/2015 2:11 PM, Mike Cizek wrote:
Glad it works!!!  FB!!  Now, go work some big DX and have a beer (or, 
have a beer and then work some DX, just no Bud light $#!t, make sure 
it's a real beer).  Glad I could help.


73,
Mike W0VTT

On 18-Mar-15 13:08, bob wrote:

Well at this time I can not find the .ini file.

BUT I downloaded DX4WIN again. Moved a log over and the F2 F8 
sequence pattern
I am so used to now works. YES the hitting F2 now sets the flag NOW 
to Y from N.


Thanks to you all. and special thanks to Mike W0VTT for helping try 
and get this
resolved over the phone. He took my log and it worked fine so as 
suggested I

reinstalled DX4WIN and it appears to be good for now.

I now need to reset preferences etc. I'll let you know.

WOW...after all these years this is the first real issue I have ever 
had with DX4WIN and thanks for all

great help out there.

de KR4DA Bob


On 3/18/2015 1:27 PM, SM5DJZ Jan/John wrote:
When You are ready for label-printing, You hit F8 (to clear window) 
and You add a letter Y in the
label box and enter. Now You can see all the QSO's You want in 
label. Then go to "QSLs" and "Print QSL's"


That's what I do, and it works for me...
73 Jan SM5DJZ


At 17:53 2015-03-18, bob wrote:

I set modified in preferences to zero. So that's fixed as before.
But I swear when doing QSL's it was always F8 enter call F2 then F8 
enter call F2

Then select print QSL's in SEQ. What am I doing wrong.
There are no filters.
I even hit ALT-s after each one.



On 3/18/2015 12:42 PM, bob wrote:

OK I want to print a label.
I hit F8 I enter Lu1arv the call comes up I hit F2 I then tried ALT-S
I then hit F8 enters 51Z the call comes up I hit F2 then tried ALT-S
I then hit F8 entern6wdk the call comes up I hit F2 then ALT-S
There ARE ZERO LABELS TO PRINT. Any ideas.

NOW if I bring up the cluster click on a call it populates my 
dx4win I hit F2 AND
I click on another call it populates the window I hit F2 and for 
ten of these NEW entries

I NOW HAVE 10 QSL lables to print.
I don't understand how do I print a new label for EXISTING log 
book entries.


Also when I hit F2 the modified comes on in RED and it counts down 
from 120

I don't remember it being that long.

Thanks KR4DA  Bob

---
This email has been checked for viruses by Avast antivirus software.
http://www.avast.com 

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win 

Help: http://mailman.qth.net/mmfaq.htm 


Post: mailto:DX4WIN@mailman.qth.net 

This list hosted by: http://www.qsl.net 
Please help support this email list: 
http://www.qsl.net/donate.html 



---
This email has been checked for viruses by Avast antivirus software.
http://www.avast.com 

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win 

Help: http://mailman.qth.net/mmfaq.htm 


Post: mailto:DX4WIN@mailman.qth.net 

This list hosted by: http://www.qsl.net 
Please help support this email list: http://www.qsl.net/donate.html 





---
This email has been checked for viruses by Avast antivirus software.
http://www.avast.com
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html








---
This email has been checked for viruses by Avast antivirus software.
http://www.avast.com

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] printing labels still again..

[bob]

Well at this time I can not find the .ini file.

BUT I downloaded DX4WIN again. Moved a log over and the F2 F8 sequence 
pattern
I am so used to now works. YES the hitting F2 now sets the flag NOW to Y 
from N.


Thanks to you all. and special thanks to Mike W0VTT for helping try and 
get this
resolved over the phone. He took my log and it worked fine so as 
suggested I

reinstalled DX4WIN and it appears to be good for now.

I now need to reset preferences etc. I'll let you know.

WOW...after all these years this is the first real issue I have ever had 
with DX4WIN and thanks for all

great help out there.

de KR4DA Bob


On 3/18/2015 1:27 PM, SM5DJZ Jan/John wrote:
When You are ready for label-printing, You hit F8 (to clear window) 
and You add a letter Y in the
label box and enter. Now You can see all the QSO's You want in label. 
Then go to "QSLs" and "Print QSL's"


That's what I do, and it works for me...
73 Jan SM5DJZ


At 17:53 2015-03-18, bob wrote:

I set modified in preferences to zero. So that's fixed as before.
But I swear when doing QSL's it was always F8 enter call F2 then F8 
enter call F2

Then select print QSL's in SEQ. What am I doing wrong.
There are no filters.
I even hit ALT-s after each one.



On 3/18/2015 12:42 PM, bob wrote:

OK I want to print a label.
I hit F8 I enter Lu1arv the call comes up I hit F2 I then tried ALT-S
I then hit F8 enters 51Z the call comes up I hit F2 then tried ALT-S
I then hit F8 entern6wdk the call comes up I hit F2 then ALT-S
There ARE ZERO LABELS TO PRINT. Any ideas.

NOW if I bring up the cluster click on a call it populates my dx4win 
I hit F2 AND
I click on another call it populates the window I hit F2 and for ten 
of these NEW entries

I NOW HAVE 10 QSL lables to print.
I don't understand how do I print a new label for EXISTING log book 
entries.


Also when I hit F2 the modified comes on in RED and it counts down 
from 120

I don't remember it being that long.

Thanks KR4DA  Bob

---
This email has been checked for viruses by Avast antivirus software.
http://www.avast.com 

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win 

Help: http://mailman.qth.net/mmfaq.htm 


Post: mailto:DX4WIN@mailman.qth.net 

This list hosted by: http://www.qsl.net 
Please help support this email list: http://www.qsl.net/donate.html 




---
This email has been checked for viruses by Avast antivirus software.
http://www.avast.com 

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win 


Help: http://mailman.qth.net/mmfaq.htm 
Post: mailto:DX4WIN@mailman.qth.net 

This list hosted by: http://www.qsl.net 
Please help support this email list: http://www.qsl.net/donate.html 





---
This email has been checked for viruses by Avast antivirus software.
http://www.avast.com
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] printing labels still again..

[SM5DJZ Jan/John]

When You are ready for label-printing, You hit F8 (to clear window) and You add 
a letter Y in the 
label box and enter. Now You can see all the QSO's You want in label. Then go 
to "QSLs" and "Print QSL's"

That's what I do, and it works for me...
73 Jan SM5DJZ


At 17:53 2015-03-18, bob wrote:
>I set modified in preferences to zero. So that's fixed as before.
>But I swear when doing QSL's it was always F8 enter call F2 then F8 enter call 
>F2
>Then select print QSL's in SEQ. What am I doing wrong.
>There are no filters.
>I even hit ALT-s after each one.
>
>
>
>On 3/18/2015 12:42 PM, bob wrote:
>>OK I want to print a label.
>>I hit F8 I enter Lu1arv the call comes up I hit F2 I then tried ALT-S
>>I then hit F8 enters 51Z the call comes up I hit F2 then tried ALT-S
>>I then hit F8 entern6wdk the call comes up I hit F2 then ALT-S
>>There ARE ZERO LABELS TO PRINT. Any ideas.
>>
>>NOW if I bring up the cluster click on a call it populates my dx4win I hit F2 
>>AND
>>I click on another call it populates the window I hit F2 and for ten of these 
>>NEW entries
>>I NOW HAVE 10 QSL lables to print.
>>I don't understand how do I print a new label for EXISTING log book entries.
>>
>>Also when I hit F2 the modified comes on in RED and it counts down from 120
>>I don't remember it being that long.
>>
>>Thanks KR4DA  Bob
>>
>>---
>>This email has been checked for viruses by Avast antivirus software.
>>http://www.avast.com
>>
>>__
>>DX4WIN mailing list
>>Home: http://mailman.qth.net/mailman/listinfo/dx4win
>>Help: http://mailman.qth.net/mmfaq.htm
>>Post: mailto:DX4WIN@mailman.qth.net
>>
>>This list hosted by: http://www.qsl.net
>>Please help support this email list: http://www.qsl.net/donate.html
>
>
>---
>This email has been checked for viruses by Avast antivirus software.
>http://www.avast.com
>
>__
>DX4WIN mailing list
>Home: http://mailman.qth.net/mailman/listinfo/dx4win
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:DX4WIN@mailman.qth.net
>
>This list hosted by: http://www.qsl.net
>Please help support this email list: http://www.qsl.net/donate.html
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] printing labels still again..

[WA7AA]

On 18-Mar-15 9:53 AM, bob wrote:

I set modified in preferences to zero. So that's fixed as before.
But I swear when doing QSL's it was always F8 enter call F2 then F8 
enter call F2

Then select print QSL's in SEQ. What am I doing wrong.
There are no filters.
I even hit ALT-s after each one.


Well, when you press F2, does the Label field in the QSO data window 
change from N to Y? This would be good to know. If you don't see that, 
make sure you're in Expert mode, then F5 until you can see it.


If not, then pressing F2 is not set to change it, possibly because your 
DX4Win.ini file got hosed up. You say you set the F2 in preferences to 
"Mark for printing a label". Open the DX4Win.ini with a text editor and 
check to see that the flag called "F_F2_Label" is set to 1 and not 0.


You can also go to QSLs -> Set QSL Label Flag and see if this makes any 
difference (i.e. change Label to Y).


And finally, when you go to print, do you select Print QSL Labels or 
Print Labels in Sequence? Try both and see if there is a difference. I 
never use Sequence so I can't help you there...


Good luck.

WA7AA
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] printing labels still again..

[bob]

I set modified in preferences to zero. So that's fixed as before.
But I swear when doing QSL's it was always F8 enter call F2 then F8 
enter call F2

Then select print QSL's in SEQ. What am I doing wrong.
There are no filters.
I even hit ALT-s after each one.



On 3/18/2015 12:42 PM, bob wrote:

OK I want to print a label.
I hit F8 I enter Lu1arv the call comes up I hit F2 I then tried ALT-S
I then hit F8 enters 51Z the call comes up I hit F2 then tried ALT-S
I then hit F8 entern6wdk the call comes up I hit F2 then ALT-S
There ARE ZERO LABELS TO PRINT. Any ideas.

NOW if I bring up the cluster click on a call it populates my dx4win I 
hit F2 AND
I click on another call it populates the window I hit F2 and for ten 
of these NEW entries

I NOW HAVE 10 QSL lables to print.
I don't understand how do I print a new label for EXISTING log book 
entries.


Also when I hit F2 the modified comes on in RED and it counts down 
from 120

I don't remember it being that long.

Thanks KR4DA  Bob

---
This email has been checked for viruses by Avast antivirus software.
http://www.avast.com

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html




---
This email has been checked for viruses by Avast antivirus software.
http://www.avast.com

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Printing labels

[bob.janet]

Sounds like you have a filter selected so you are only getting a label for the 
last QSO you looked at.  Before you print the labels go into - Filter - Cancel 
Filter.


73 Bob VP8LP






From: WA7AA
Sent: ‎Tuesday‎, ‎17‎ ‎March‎ ‎2015 ‎18‎:‎14
To: bob, dx4win@mailman.qth.net





On 17-Mar-15 2:00 PM, bob wrote:
> Well...I'm pulling my hair out. I have tried several different things.
> Here is my problem.
>
> I look up a QSO (F8) to cfm I hit  F2 update hit F8 to loo for next 
> qso hit enter YES.
> enters blank look up enter next call.. to cfm hit enter hit F2 cfm 
> update then F8 on and on.
>
> When I try to print the labels there only shows ONE label to be printed.
>
> So how do I look up the QSO cfm it and get it to set the print label 
> flag then go to the next one.
> Also if I enter the qsdo to print it will print one at a time. BUt 
> when I enter the next qso only that qso will print not the one that 
> would of before.
> Its like I can only print one at at time.
>
> I have done this a thousand times back in the day.
> BUT I am just now getting back after three years to doing my qsling 
> requests.
>
> I can print them out one at a time but I want to get them in a print 
> list like it used to work.
> And OH I can not view a print label preview either. it comes up but it 
> does'nt show the ONE qsl that will print.
>

You have to go to Preferences -> F2 Key and check the box "Mark for 
printing a label", then save.

73  Zoran WA7AA
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Printing labels

[WA7AA]

On 17-Mar-15 2:00 PM, bob wrote:

Well...I'm pulling my hair out. I have tried several different things.
Here is my problem.

I look up a QSO (F8) to cfm I hit  F2 update hit F8 to loo for next 
qso hit enter YES.
enters blank look up enter next call.. to cfm hit enter hit F2 cfm 
update then F8 on and on.


When I try to print the labels there only shows ONE label to be printed.

So how do I look up the QSO cfm it and get it to set the print label 
flag then go to the next one.
Also if I enter the qsdo to print it will print one at a time. BUt 
when I enter the next qso only that qso will print not the one that 
would of before.

Its like I can only print one at at time.

I have done this a thousand times back in the day.
BUT I am just now getting back after three years to doing my qsling 
requests.


I can print them out one at a time but I want to get them in a print 
list like it used to work.
And OH I can not view a print label preview either. it comes up but it 
does'nt show the ONE qsl that will print.




You have to go to Preferences -> F2 Key and check the box "Mark for 
printing a label", then save.


73  Zoran WA7AA
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Printing labels

[bob]

I went to my log added to calls off the cluster
I opened the LOG window clicked on each one at a time
hit F2 and the print QSL showed 10 to print.

Huh?

Any help thanks.

Bob KR4DA


On 3/17/2015 5:00 PM, bob wrote:

Well...I'm pulling my hair out. I have tried several different things.
Here is my problem.

I look up a QSO (F8) to cfm I hit  F2 update hit F8 to loo for next 
qso hit enter YES.
enters blank look up enter next call.. to cfm hit enter hit F2 cfm 
update then F8 on and on.


When I try to print the labels there only shows ONE label to be printed.

So how do I look up the QSO cfm it and get it to set the print label 
flag then go to the next one.
Also if I enter the qsdo to print it will print one at a time. BUt 
when I enter the next qso only that qso will print not the one that 
would of before.

Its like I can only print one at at time.

I have done this a thousand times back in the day.
BUT I am just now getting back after three years to doing my qsling 
requests.


I can print them out one at a time but I want to get them in a print 
list like it used to work.
And OH I can not view a print label preview either. it comes up but it 
does'nt show the ONE qsl that will print.


BTW any one using a FT991. I have one coming this week.

KR4dA Bob

---
This email has been checked for viruses by Avast antivirus software.
http://www.avast.com

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html




---
This email has been checked for viruses by Avast antivirus software.
http://www.avast.com

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Printing labels

[Kostas SV1DPI]

Maybe my notes can help you...
http://users.otenet.gr/~sv1dpi/en/dx4win/printqsos.html 


73 Kostas sv1dpi


Στις 29/10/2012 6:41 πμ, ο/η W9RPM έγραψε:
> Hi, Asked about this about a year ago, and I lost my Info that I was
> sent by someone. I am having trouble with the Labels not lining up
> right. I am using Avery 5160. If anyone can tell me there settings I
> would appreciate it. Thanks, John
>

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] printing labels

[Ned Stearns]

On 2/6/2012 3:47 AM, Dick Flanagan wrote:
> QSO Window ->  QSLs ->  Print QSL Labels ->  Edit ->  Double-Click in Body
> font window.
Another option is to uncheck the "Commercial" box on the Edit window. 
Then you get three lines.

Ned
AA7A
> --
> Dick Flanagan K7VC
> d...@k7vc.com
>
> On 2/5/2012 4:29 PM, Steve K7AWB wrote:
>> I print my QSL labels on a HP LaserJet 1200.  Each label is on a Avery 5160. 
>>  I can only get two QSOs on each label.  My previous logging program 
>> (WinEQF) put three QSOs on the same label.  Where can I go to change the 
>> font to something smaller so three QSOs fit on the label?
>>
>> 73
>> Steve Sala
>> K7AWB
>> DN17es
>> Nine Mile Falls, WA
>> 468  ARRL approved grids on 6-meters
>> 294 active entities ARRL confirmed-DXCC
>> __
>>

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] printing labels

[Dick Flanagan]

QSO Window -> QSLs -> Print QSL Labels -> Edit -> Double-Click in Body 
font window.

--
Dick Flanagan K7VC
d...@k7vc.com

On 2/5/2012 4:29 PM, Steve K7AWB wrote:
> I print my QSL labels on a HP LaserJet 1200.  Each label is on a Avery 5160.  
> I can only get two QSOs on each label.  My previous logging program (WinEQF) 
> put three QSOs on the same label.  Where can I go to change the font to 
> something smaller so three QSOs fit on the label?
>
> 73
> Steve Sala
> K7AWB
> DN17es
> Nine Mile Falls, WA
> 468  ARRL approved grids on 6-meters
> 294 active entities ARRL confirmed-DXCC
> __
> DX4WIN mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:DX4WIN@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>
>
>
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Printing Labels

[Art - W6KY]

Be sure from the DX4WIN 'file' dropdown,  save, exit DX4WIN and restart
That might do the trick...
73, Art  W6KY

 .


I used to be indecisive. Now I’m not sure



- Original Message 
From: Larry ( Jim ) Willingham 
To: dx4win@mailman.qth.net
Sent: Sun, April 17, 2011 3:08:01 PM
Subject: [Dx4win] Printing Labels

I am just starting to use the Label feature on DX4WIN  (V: 7.07.02)

I want to use  Andale Mono Font for the Call Signs and
use  Arial for the Body Font.  I set it up that way, but
everything prints in Arial even the call.  Is there a trick
to getting it to work.Thanks
__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Printing labels of one "group"

[Kostas Stamatis]

Also don't forget that you can write %% under lab/rep (file>preferences).
This will print groupname.
If i print labels and not direct on cards I don't make selections at all.
I have written
&& @@...73 de %%
under lab/rep
My groups are like 1=sv1dpi, 2=sx2004d 3=sx25dpi, etc.
So dx4win will print something like this
Jim Pse QSL... 73 de SX25DPI
73 and GL Kostas SV1DPI...
and for the next 2 months SX25DPI also... celebrating 25 anniversary of 
RAWWG(SZ1A) club.
See http://www.qrz.com/db/sx25a/ for details

- Original Message - 
From: "Jim Reisert AD1C" 
To: "J. C. Mc Laughlin" 
Cc: 
Sent: Thursday, August 26, 2010 2:46 AM
Subject: Re: [Dx4win] Printing labels of one "group"


> On Wed, Aug 25, 2010 at 5:27 PM, J. C. Mc Laughlin  
> wrote:
>
>> Goal is to print labels corresponding to QSOs having one group number and
>> only that group number.
>>
>> Please indicate, step-by-step how one in v8.03 causes the following to
>> happen:
>>
>> How does one get dx4win ONLY to print labels for QSOs having a Y in the
>> label box and having a particular group number?
>
>
> Create a Selection for the group:
>
> In the QSO window, Filter | Selection
>
> In the box that says "Current selection" type the name of the group,
> or something else you can remember.  Then click the Add button.
>
> Scroll down where it says "Group name" and double-click on the group 
> number.
>
> Click on the Update button
>
> This should filter your log to ONLY QSOs with that group.
>
> When you are done, make sure to set Current selection to "All QSOs"
>
> 73 - Jim AD1C
>
>
> -- 
> Jim Reisert AD1C, , http://www.ad1c.us
> __
> Dx4win mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Dx4win@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> 

__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Printing labels of one "group"

[J. C. Mc Laughlin]

Dear Group:  With a couple of helpful suggestions from Jim AD1C, I was 
eventually able to print labels just for one Group.  It is not a simple 
procedure.  Here is a copy of what I think eventually worked.

-
Steps needed to effect printing labels for QSOs of one group that has Y in 
Label:

1. File | Preferences

Personal tab

Set User Level = Expert

File | Save Changes and Exit

2. Filter | Edit Group Names

cycle Add to get the numbers of all groups that might be of interest to show

OK

3. Filter | Selection

In Current Selection type a name for the group of interest

Add

In Group Name find the number of the group of interest and double-click

Check the Group Filter box

Click Update

OK

4. QSLs | Print QSL Labels

only QSOs in the desired group that have Y in Label will have labels printed

5. Filter | Selection

Select:  All QSOs

--
It is expected that this will help others.  73,  Mac  N8TT

J. McLaughlin;  Michigan, USA
Home:  j...@power-net.net
- Original Message - 
From: "J. C. Mc Laughlin" 
To: 
Sent: Wednesday, August 25, 2010 7:27 PM
Subject: Printing labels of one "group"


> Goal is to print labels corresponding to QSOs having one group number and 
> only that group number.
>
> Please indicate, step-by-step how one in v8.03 causes the following to 
> happen:
>
> How does one get dx4win ONLY to print labels for QSOs having a Y in the 
> label box and having a particular group number?
>
> Lots of time was spent in experimenting and reading Help to no avail.
>
> Thanks,MacN8TT
>
> J. McLaughlin;  Michigan, USA
> Home:  j...@power-net.net 

__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Printing labels of one "group"

[Jim Reisert AD1C]

On Wed, Aug 25, 2010 at 5:27 PM, J. C. Mc Laughlin  wrote:

> Goal is to print labels corresponding to QSOs having one group number and
> only that group number.
>
> Please indicate, step-by-step how one in v8.03 causes the following to
> happen:
>
> How does one get dx4win ONLY to print labels for QSOs having a Y in the
> label box and having a particular group number?


Create a Selection for the group:

In the QSO window, Filter | Selection

In the box that says "Current selection" type the name of the group,
or something else you can remember.  Then click the Add button.

Scroll down where it says "Group name" and double-click on the group number.

Click on the Update button

This should filter your log to ONLY QSOs with that group.

When you are done, make sure to set Current selection to "All QSOs"

73 - Jim AD1C


-- 
Jim Reisert AD1C, , http://www.ad1c.us
__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html