Re: [Elecraft] Funky antenna
Kevin, I think he has!! Strange cooking sound heard around 7.033 ! Geoff, GM4ESD Kevin wrote: > Don't try transmitting that way! Ouch!! > Kevin :) KD5ONS > > > On Fri, 22 Apr 2005 23:28:00 -0300, Alan Beck <[EMAIL PROTECTED]> > wrote: > > > Using my pinky finger as an antenna, I heard an LZ1 on 7.033 > > Alan. ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] Elecraft K2 S/n 01432...LIVES.!!
That is the main reason I do not use the S meter to give someone a signal report. I leave the AF gain cranked up and use the RF gain to adjust volume. It gives me a better chance at digging folks out of the noise level. Thus the S meter on my rig just gives me a fun light to watch while I am on the air. I should really turn it off but it is much like watching the needles bounce in my antenna tuner. Keeps me company in the shack :) 73, Kevin. On Fri, 22 Apr 2005 22:58:52 -0400, W3FPR - Don Wilhelm <[EMAIL PROTECTED]> wrote: Yes, the S-meter will climb when the RF Gain is lowered - that is normal behavior. 73, Don W3FPR -- No virus found in this outgoing message. Checked by AVG Anti-Virus. Version: 7.0.308 / Virus Database: 266.10.2 - Release Date: 4/21/2005 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] Funky antenna
Don't try transmitting that way! Ouch!! Kevin :) KD5ONS On Fri, 22 Apr 2005 23:28:00 -0300, Alan Beck <[EMAIL PROTECTED]> wrote: Using my pinky finger as an antenna, I heard an LZ1 on 7.033 Alan. -- No virus found in this outgoing message. Checked by AVG Anti-Virus. Version: 7.0.308 / Virus Database: 266.10.2 - Release Date: 4/21/2005 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
RE: [Elecraft] Elecraft K2 S/n 01432...LIVES.!!
Paul, Andy and all, It is not unusual for the S-meter calibrations to change from those initial settings that were made when you had only the Contol board and the Front Panel boards complete. Now that you have a full receiver, you should re-do the CAL S LO and CAL S-Hi calibration to straighten out the S-meter. The manual does not specifically state it, but those initial settings are at a point where you are becoming accustomed to working with the menu parameters, and may not be the final settings required. Since this question crops up from time to time, it would be a good addition to the manual to put in a step indicating that re-calibration of th S-meter may need to be done after the full receiver is built and all filters aligned. Yes, the S-meter will climb when the RF Gain is lowered - that is normal behavior. 73, Don W3FPR > -Original Message- > > > Still got a couple of problems to sort out,... Like WHY..the S-Meter > > is still sitting at S3 of constant... when there is nothing to be > > heard on the band...or any stations on a particular frequency > > Suppose I'll come across why later in the manual... perhaps a "tweak" > > still to be done...?? > > > I also have that same S meter issue on my #4818 which is in the middle > of its receiver alignment (is it the way it is supposed to be I > wonder??) > > And as I turn down the RF gain, the S meter climbs and climbs until it > is all lit up. I don't know if that is the way it is supposed to be or > not. > > But congratulations on getting to hear stuff on 40m! > > -- No virus found in this outgoing message. Checked by AVG Anti-Virus. Version: 7.0.308 / Virus Database: 266.10.2 - Release Date: 4/21/2005 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
RE: [Elecraft] re: NEW ELECRAFT AMPS ...
Just a rough guess...something about like a K2 delivers. Eric KE6US -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Weymouth Walker Sent: Friday, April 22, 2005 6:44 PM To: Elecraft Reflector Subject: [Elecraft] re: NEW ELECRAFT AMPS ... Importance: High Anyone know what the drive requirements are for these new amplifiers? 72/3, Weymouth Walker K8EAB ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] Elecraft K2 S/n 01432...LIVES.!!
On Apr 22, 2005, at 10:04 PM, Andy GM0NWI wrote: Still got a couple of problems to sort out,... Like WHY..the S-Meter is still sitting at S3 of constant... when there is nothing to be heard on the band...or any stations on a particular frequency Suppose I'll come across why later in the manual... perhaps a "tweak" still to be done...?? Andy, your writing style is very interesting and fun to read and your energy level is inspiring! (and your . key on your keyboard must be tired!) I also have that same S meter issue on my #4818 which is in the middle of its receiver alignment (is it the way it is supposed to be I wonder??) And as I turn down the RF gain, the S meter climbs and climbs until it is all lit up. I don't know if that is the way it is supposed to be or not. But congratulations on getting to hear stuff on 40m! ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] Funky antenna
Using my pinky finger as an antenna, I heard an LZ1 on 7.033 >From the Tungsten C Palm of Alan. ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
RE: [Elecraft] re: NEW ELECRAFT AMPS ...
I haven't seen the specs yet, but I would bet 10 to 1 that it can be driven to full output with 100 watts or less. So --- if you have a K2/100, it will work FB. 73, Don W3FPR > -Original Message- > Anyone know what the drive requirements > are for these new amplifiers? > > -- No virus found in this outgoing message. Checked by AVG Anti-Virus. Version: 7.0.308 / Virus Database: 266.10.2 - Release Date: 4/21/2005 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] Elecraft K2 S/n 01432...LIVES.!!
Yes' Sir'ee! You read that correctly...! As of today 23rd April 2005... "... Elecraft K2 S/n 01432.." LIVES..!! Bhoy's... ! You CANT...even begin to know how I feel today...! This, for me, has been only the 3rd most happiest times in my entire life..! The 1st...passing my driving test in 1983, ...first time aroundwith a "hand controlled" car The 2nd Passing my "Ham Ticket"...after 18 months 12 HOURS A DAY...constant studying of the "Manual"...and all other literature involved.. . and the 3rd... " The Birth Of My Elecraft K2 S/n 01432..."...! Oh..! Yes...! . as the man himself Mr Elvis Aron Presley ...sang about many, many a time in my room at home... "I Got My Mojo Working..." And BOY IT FEELS GOOD..!! Now I KNOW...what all the talk has been about on the reflector, HF Bands, magazinesetc for the last 5 years of my life... What a truly "Monumentous" occassion happened here today...! Some of you guy's will remember earlier in the week, where I posted to the reflector... that there had indeed been a "hiccup" in the construction of my "Baby"... ... with the "Alignment & Test Past II" section of the manual, and I was admittedly strugglin' with the "way of the manual", shall we say, ..not knowing wether I was actually doing the correct proceedure for alignment on the 40M Band...(in and around Page 50)... Well... Once Again... my dear friend, "mentor"...and...close friend John Ross GM1BSG...has again (...keep readin' John..!) "Saved The Day"... From the outset of the beginning of the construction of "K2 S/n 01432" (...yeah..I know..its layen in a cupboard t... long..!)... John has been an absolutley monumentally oustanding "rock" for me throughout all of this... the man is a pure genius...a fantastic friend, shoulder to cry on the whole shootin' match... When others all around me, constantly said, "..you'll never do that Andy...your not good enough..." John... helped me "rise above it all"...with his kind words, determination, and sheer bloody-mindedness,... telling me that he "Knew...! that I could do it.." ...I thought he was lying or just sayin that to help me along,...but today, it all fell into place..and now I beleive him...Without HIM...I CAN say, that I would still be "scratching my head" on this one, with the only thing to do "backtrack" through the manual...which we did to a certain extent, but nothing like I would have needed to do on my own if he were'nt here.. Today, we connected up some "Serious" test equipment, I'll leave John to explain the finer points of that and quickly found the "problem"... What Was I Hear Y'all Say...?? In a word ME... Dumb-%^&*...! here had "forgotten" in my wisdom, to include a couple of very important componants during the last few pages before puttin her together for the "Big Smoke Test"...! R39 and another componant...on the back left-hand-side of the "RF Board"...which of course, allowed me to "tune" the various filters, even for 40m...but was stopping the rig from receiving ...ANYTHING !! on 40m... a quick read of the schematic (by John..!) and a scan of the board, brought this to our attentionWhere I "..hastily made a quick retreat to the kitchen...! " ...and I'm NOT joking...!! How "small" once again did I feel for the 2nd time this week.?? Another "small" problem that I seemed to have had, was with some "switching" of the 40m filter,this turned out to be Toroid "T5" or "T6" which I had "orientated" in the wrong direction..! making it act, kinda like a "choke" or "attenuator" (or so john explained..!) this was b.a.d. ... as you can imagine, attenuating, so to speak the signals on 40m... Must have been one of those moments of madness, ...where I had visited other rooms in the house for a moment and forgotten on returning where I was at...or perhaps what I was "partaking in" at the time... I've learned my lesson for sure... But it did "raise a few eyebrows. and ...temperatures..! " I can tell you, when John found out what had happened infact,..he has made sure that I NEVER apply for a job at his satellite business, where they undertake the fabrication of satalite receivers, LMB's etc etc...EVER..!! (...aye John..?) A quick change around of the toroid, a solder of the 2 componants that I had ommited to install... BANG..! There they weresignals 5-5, 5-7, 5-9 ...all on 40m CW..!! Fanfare Plays In The Background...! Oh..! Joyess Moment...! ...and nearly tears of happiness all around SO..! Glad to say that K2 S/n 01432 is now receiving stations on 40m CW...Boy Its Good..!.. Still got a couple of problems to sort out,... Like WHY..the S-Meter is still sitting at S3 of constant... when there is nothing to be heard on the band...or any stations on a particular frequency Suppose I'll come across why later in the manual... perhaps a "tweak" still to be d
[Elecraft] re: NEW ELECRAFT AMPS ...
Anyone know what the drive requirements are for these new amplifiers? 72/3, Weymouth Walker K8EAB ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] SN 4890
Arrived today in a beautiful white box ready for assembly is K2 #4890. Ken Lotts aa7jc ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] WTD:Manuals...
Guy's...! Anyone got copies, wither .pdf...or photocopies... of the following manuals... I will pay for any postage, or copying costs... Gonna buy a "fully loaded" Norcal Sierra... now that I am well on my way, with the "Fully Loaded K2" (...more in other past later...)... have looked at the "Wilderness Sierra" on the Norcal site, and found the info very interesting... but would be interested in how extensive the manual is, especially as regards the band modules... Also... missed out on the run of the "Cascade" kitnew moto "...Buy n Build Every Kit Available.." (...well atleast the ones I can afford...)... So..! would be very interestd in what this kit was about, ...and if I could possibly replicate it at a future date with some stuff from the "junk box"...! Again... I can pay for any postage, or copying ... but if possible..a .pdf would enable me to view either manual on the pc... Thanks For The Bandwidth Guysheres hopin' that someone can come through for me on this ... Andy [EMAIL PROTECTED] "...I Just See It.!.." John A. Ross (RSD Communications circa 2004) A.R.S. GM0NWI QRP "..It is vain to do with more "A Dis-Orientated Kiwi... "K2 S/n 01432 Soon To Be On-Air"what can be done with less.. In The Northern Hemisphere..." GQRP No.9576 QRP-L No.2165 ARCI No.10561 Central Florida DX Association (CFDXA) Alaska QRP Club No.190 Flying Pigs QRP Club No. FP#-1061 ICQ No.31899603 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
RE: [Elecraft] FT100 knob
1-714-827-7600 or 1-800-283-7839 They have lots of them. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of William E. Twaddell Sent: Friday, April 22, 2005 2:05 PM To: elecraft@mailman.qth.net Subject: [Elecraft] FT100 knob Looking for a Yaesu knob for my K2! Any around? Bill N2DH [EMAIL PROTECTED] ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] FT100 knob
Looking for a Yaesu knob for my K2! Any around? Bill N2DH [EMAIL PROTECTED] ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] When and where can we see pictures of new amp?
Maybe someone took pictures at the ham fest where it was announced (Visalia?) who would be willing to post them. Now that it has been announced by Earl I would like to see and hear more too. Is it going to be compatible with field work? Field Day is coming up and some of those ops love to run maximum legal power. Great way to grill their brats ;) Kevin. KD5ONS On Fri, 22 Apr 2005 13:16:17 -0700 (PDT), Lee Buller <[EMAIL PROTECTED]> wrote: I am very curious as to pictures and info on the new amp from Elecraft. -- No virus found in this outgoing message. Checked by AVG Anti-Virus. Version: 7.0.308 / Virus Database: 266.10.2 - Release Date: 4/21/2005 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] When and where can we see pictures of new amp?
OK, I am very curious as to pictures and info on the new amp from Elecraft. Is it called KPA800 or KPA1500. Or does it have a name like Everest or Ranier or Apache or Mohican ala Heathkit. Does it fit in an EC2? Kit? (Please) Dayton is still so far away! ! When will it be posted and where? Curious Lee (like in George) - K0WA :>) Common sense is in short supply - get some and use it. If you can't find any common sense, ask somebody who owns some. - Lee Buller ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] KX1 battery
I for one would at least like to hear if someone see any remote problem with this type of mod? KI4DGH Chuck > > From: "Dick Harms PA2DW" <[EMAIL PROTECTED]> > Date: 2005/04/22 Fri PM 01:49:12 CDT > To: "'Elecraft Reflector'" > Subject: [Elecraft] KX1 battery > > Hi all, > > Some days ago I posted a message regarding the charging of NiMh battery's. I > got only one reaction, so I guess many are wondering what is a good way! I > decided to go for the experimental way and did the following: > - Measure the supply voltage, we call that U1; > - Measure the battery voltage in charged situation, we call that U2; > - Take U1-U2 and devide that over the charging current you want to use. In > case of my 2400 mA/h cells I decided for a "conservative" 200 mA; > - The result is the resistor value, in my case about 33 Ohm; > - Take the square of U1-U2 and devide over R and you have the power, in my > case between one and 2W. > I had a 33 Ohm resistor of 5W in stock which was only 0,3 inch, so it fits > very nicely. I have mounted it on the component side of the pcb, otherwise > it gets in the way of the battery! > > The result is very positive, it charges nicely. I have mounted a timer in > line with the charging supply, an old Nokia 12V GSM supply, to avoid > overcharging as I read that NiMh cells dont like that. > > Have fun! Oh and by the way; modifying is at your own risk and will probably > violate the warranty. Or perhaps Wayne and Eric find it such a good idea > that they will allow it ;) > > 73, Dick PA2DW > > ___ > Elecraft mailing list > Post to: Elecraft@mailman.qth.net > You must be a subscriber to post to the list. > Subscriber Info (Addr. Change, sub, unsub etc.): > http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/subscribers.htm > Elecraft web page: http://www.elecraft.com > ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] IF Filter Response relatively flat
I am not shure, if my CW-.filter(s) work(s) correctly because I find it/them rather broad regarding the shape factor. If the peak-width is set to approx. 150 Hz (0,20) the -6 db-width is around 200 Hz, but the - 60 db-width is still about 1,6 khz. I don´t have precise measurement tools, so don´t take the stated values as absolute values, but I can´t be too far off. I wonder if I have built in a mistake and - if yes - with what method I can trace ist. Has anybody checked the shapefactor of the CW-filter-chain at different settings? DK4AS Karsten Eppert very happy owner of his K2 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] Belize V31CA/NN4CW
Folks, I'll be in Belize fishing April 23-30. I'll be around the qrp watering holes on my KX1 probably 2300-0100 UTC after fishing. Fishing is the priority. ;) The lodge is located in the heart of permit country on Northeast Caye, which is one of the islands in the Pelican Range, 18 miles Southeast of Dangriga, Belize. I applied for the license by mail on March 17th and it arrived this pm 14 hours before departure. Now that's timing. 73, Gil V31CA/NN4CW ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] KX1 battery
Hi all, Some days ago I posted a message regarding the charging of NiMh battery's. I got only one reaction, so I guess many are wondering what is a good way! I decided to go for the experimental way and did the following: - Measure the supply voltage, we call that U1; - Measure the battery voltage in charged situation, we call that U2; - Take U1-U2 and devide that over the charging current you want to use. In case of my 2400 mA/h cells I decided for a "conservative" 200 mA; - The result is the resistor value, in my case about 33 Ohm; - Take the square of U1-U2 and devide over R and you have the power, in my case between one and 2W. I had a 33 Ohm resistor of 5W in stock which was only 0,3 inch, so it fits very nicely. I have mounted it on the component side of the pcb, otherwise it gets in the way of the battery! The result is very positive, it charges nicely. I have mounted a timer in line with the charging supply, an old Nokia 12V GSM supply, to avoid overcharging as I read that NiMh cells dont like that. Have fun! Oh and by the way; modifying is at your own risk and will probably violate the warranty. Or perhaps Wayne and Eric find it such a good idea that they will allow it ;) 73, Dick PA2DW ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] WTB: MP-1 Antenna and portable case
I am looking for a good used MP-1 Super Antenna for a reasonable price. I am putting together a rapid-deployment station for disaster relief situations. I also need a carrying case that measures about 18"x12"x6", or something close to that. Can anybody help? 73, Mark Baugh W5EZY Grenada MS __ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] WTB K1 filter board
Am still looking for a four band ( 40 30 20 15 ) assembled board or a two band ( 30 15) assembled board for the K1. Contact me off llist. Ken K1DWZ ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] K2 & hamlib
Mike, Filter settings don't work, but Brian Mury has taken on the maintenance of the K2 module (see the hamlib list) and hopes to fix it. Try gMFSK 0.7.1pre1 which includes Olivia from Pawel and also a bandpass-center button (which I wrote and Tomi Manninen incorporated, once he made it work, hi hi). Leigh. Mike Markowski wrote: Now that I have a KPA100 on order which happens to include an rs232 port, I wonder if any linux users on the list have tried hamlib (http://hamlib.org) with the K2. I just noticed it offers a K2 option. Does it work well or are the hamlib-supported features limited? When I use (non-CW) digital modes I enjoy the hamlib/gmfsk/xlog trio and would love to find that the K2 is already fully supported, though I'm definitely willing to contribute software to hamlib if it's not. Thanks, Mike AB3AP ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] Re:Delta Switch & Hexbeam
Steve, Stuart, and Gang: I have a Hexbeam, fed with RG213 into a Delta switch at three locations so far... Stuart is on the right track, RF on the coax, but looking at the wrong Internet source. The Hexbeam group at Yahoo covers it all, and the 'current choke' issue has been such a common thread, that the solution is mentioned in the Home Page of the group. Quote: " 6 Amidon FB-77-1024 beads side over RG-213 and can be held in place with heat shrink" Not mentioned on the home page, is to make sure the coax from the top of the Hexbeam is routed down the 'cold' side of the center support (in the manual), and the beads are located just below the antenna mounting plate. That said, my Hexbeam is totally un-fussy, through the switch, No tuner -- straight into an Ameritron 80B amp (sometimes on--sometimes off :-) Now about that Elecraft amp 73, Bob AB7ST ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] K2 & hamlib
Hello, You might like the combo of Marote and Xlog. It won't need hamlib, although I have used hamlib with K2 and all is fine. I've been using Marote for some time now and it does everything I need. 73, Terry KA9TXE(new call on the way, just got my extra --yippee!) ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] K2 & hamlib
On Fri, April 22, 2005 14:57, Mike Markowski said: > Does it work well or are the hamlib-supported features limited? When I I do not (yet) own a K2, but I'm a rather happy camper as far as hamlib and friends are concerned. My recollections of the mailing-list are that it should work fine, but you're welcome to ask the same question in the other list as well. > love to find that the K2 is already fully supported, though I'm > definitely willing to contribute software to hamlib if it's not. I suppose your contributions would be welcome anyway ;-) B73, Andrea. -- Homepage: http://andrea.borgia.bo.it /Amateur radio: IZ4FHT ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] K2 & hamlib
Now that I have a KPA100 on order which happens to include an rs232 port, I wonder if any linux users on the list have tried hamlib (http://hamlib.org) with the K2. I just noticed it offers a K2 option. Does it work well or are the hamlib-supported features limited? When I use (non-CW) digital modes I enjoy the hamlib/gmfsk/xlog trio and would love to find that the K2 is already fully supported, though I'm definitely willing to contribute software to hamlib if it's not. Thanks, Mike AB3AP ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] KRC-2 6 TRN band Info needed
Hi Elecrafters, I have been using a KRC-2 for about one year, to control microwave transverters and provide seamless interfacing between the K2 and the microwave bands of 903 and up. My question is: When will the KRC-2 be updated to accomodate the six TRN bands that are in the version 2.04 firmware release? I would like to have some way to control more than the three bands available now. I use Writelog to set the operating frequency and change bands. If a station wants to work me on a different band, say 2304.110, I type 2304110 and BINGO I am there. I hit the K2 key paddle or push the mike button. It is very simple and saves much time and confusion. I guess what I need is the software utility that can reconfigure the KRC-2. I keep checking the website and nothing ever appears about it. The summer microwave season is upon us, and I am trying to get everything set up. I really need four TRN bands set up on one K2, and three bands on another. Last year I used three K2s, but reducing that number to two would free up valuable desk space and allow more room for empty beer bottles and pizza boxes. 73 Dave K1WHS ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
RE: [Elecraft] KPA-100 Question
Brent, As long as it is 'sort of' vertical and its feet are securely soldered to the pads, there will be no problem. It is difficult to get it exactly vertical in most cases. I would think that it should not be leaning over so far as to contact the resistors. 73, Don W3FPR > -Original Message- > > I am in the process of building my KPA-100. On page 36 of the manual I am > installing C83. The instruction says "Place C83 in exactly the position > shown..." Now the problem, I don't have the room to get C83 in the vertical > position. While winding T2, one of the turns crossed over the other, and > the windings may be slightly longer because of this. I have C83 mounted but > it is not vertical as shown. It is mounted at a slight angle. > > Question; Do I need to rewind T2 or will I be OK? > > -- No virus found in this outgoing message. Checked by AVG Anti-Virus. Version: 7.0.308 / Virus Database: 266.10.2 - Release Date: 4/21/2005 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] K2 just ordered!
After building both the KX1 and K1, I couldn´t resist ordering the K2. I ordered it without any options (will add on the options I need after operating the rig for a while). I just can´t wait building this one! Wish it was here already! Hans / LA2MOA KX1 #975 K1 #1992 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] K2 #4877 On Air(Thanks)
k2 #4877 On Air last night! Thanks kc4eyf ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] KPA-100 Question
I am in the process of building my KPA-100. On page 36 of the manual I am installing C83. The instruction says "Place C83 in exactly the position shown..." Now the problem, I don't have the room to get C83 in the vertical position. While winding T2, one of the turns crossed over the other, and the windings may be slightly longer because of this. I have C83 mounted but it is not vertical as shown. It is mounted at a slight angle. Question; Do I need to rewind T2 or will I be OK? Thanks Brent WB4X ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] new product
Great ideas. A display showing which of the International Beacon Project stations is transmitting at the time would also be very useful. Also it would be nice for us in Europe to be able to use other LF/VLF Time/Frequency stations to drive the clock other than WWV, for example the German station DCF77 on 77.5 kHz (50kW) which is very strong here (eastern Scotland). 73, Geoff GM4ESD vze3v8dt wrote: > Great idea. Expanding on that idea, have it so that it is expandable > with weather station accessories that can be interfaced to the computer > to get date/time/WX. Could include a wireless/remote WX sensors for > indoor/outdoor temperature, humidity, barometric pressure, wind speed > and direction. Each function could be a separate module but could > integrate fully into the one overall project. > > David wrote: > > >here is an idea for a new elcraft project for all of us hams > >a clock dual time clock with big lcd display > > ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com