Re: [Elecraft] propagation
I can mirror your statements. Over here in Pennsylvania, we've been seeing the same occurrence of rather rare Asian DX popping up. I'm a regular member up at K3MJW, the Skyview Radio Society (http://www.skyviewradio.net). Over the past two weeks, we've heard the following countries between 20 and 15 meters (mostly 20): China Hong Kong Asiatic Russia South Korea Vietnam Cambodia India Bangladesh Mauritius Madagascar Lots of Australia New Zealand United Arab Emirates (2 stations) Qatar Kuwait (S9+40dB) Galapagos The Falklands Egypt Libya (not sure if this was a pirate or not HI HI) Taiwan And lots of other 'local' stuff. The bands have really been shaping up lately. I can't wait to see if we get some decent 10 and 6 meter openings mid-summer (Field Day possibly??). Time to work some DX mobile on 6. - Geoffrey Wolf AB3LS Amateur Radio Callsign University of Pittsburgh '14 gr...@pitt.edu liltechd...@me.com (412) 450 - 1310 On 4/16/11 11:15 PM, Tony Estep estept...@gmail.com mailto:estept...@gmail.com wrote: I know this isn't directly elecraft related, but propagation affects everything -- anyway, it's 10 p.m here and I can hear Hawaii, Vietnam, Russia, and South America all within a few Khz on 15 meters! Bring back the good ole days! Tony KT0NY We don't want every single college grad with mathematical aptitude to become a derivatives trader. -- Barack Obama __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] propagation
Tony, AOK on the propagation , worked JT5DX on 40M Phone from Oklahoma, Worked them on cw before , but first time on phone. 73 Ken K5DNL -- --- On Sat, 4/16/11, Tony Estep estept...@gmail.com wrote: From: Tony Estep estept...@gmail.com Subject: [Elecraft] propagation To: Elecraft elecraft@mailman.qth.net Date: Saturday, April 16, 2011, 10:15 PM I know this isn't directly elecraft related, but propagation affects everything -- anyway, it's 10 p.m here and I can hear Hawaii, Vietnam, Russia, and South America all within a few Khz on 15 meters! Bring back the good ole days! Tony KT0NY -- We don't want every single college grad with mathematical aptitude to become a derivatives trader. -- Barack Obama __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] K2 with Icom AH-4?
Any used an Icom ah-4 remote atu successfully with the K2? Nick Marsh WB4SQI Sent from my iPad __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] P3 Manual Updates
Hi I received my P3 on Friday. Almost before the postie managed to wrestle the cheque from my hand, I had it built. I am delighted with it. If I was having any more fun I would be arrested. GRUMPY MODE ON Why on earth did it come with a manual and a list of errata that is supposed to be cut and pasted to bring the manual up to date? Surely, it wouldn’t have been much more time consuming for you to have made the changes to the manual itself. The changes all referred to the opperating part of the manual and none to the assembly part. 8 pages of revision in a 27 page document is way too much. GRUMPY MODE OFF I still think that it's a great piece of kit. Bill GM0VIT -- View this message in context: http://elecraft.365791.n2.nabble.com/P3-Manual-Updates-tp6281092p6281092.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] K3 loss of output power
Hi all, My K3 has recently developed a fault that causes a sudden loss of output power. I can be happily transmitting, then suddenly I hear what sounds like a relay click. The rig remains in TX mode, but the RF power meter drops down to nothing. Turning the rig off and back on again fixes the problem for a short period, before it happens again. My suspicion is that something is causing the KPA100 to trip out; the rig has spent quite a bit of time being bounced around in planes of late, so my first thought was that one of the boards might have been bounced loose. Before I take the whole thing to pieces though, has anyone else experienced a similar fault? Thanks and 73, -- Mike, M0PRL / VP8DMH __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] P3 Manual Updates
Cost. They keep costs down by printing in bulk and only revising when (I assume) stocks are low. I'm happy Elecraft provides a printed manual at all. Many products I buy these days either have the manual on a CD or expect me to download it. Getting a high-quality printed manual is very rare. On Sun, Apr 17, 2011 at 7:42 AM, Bill Henderson b...@brofcally.plus.com wrote: GRUMPY MODE ON Why on earth did it come with a manual and a list of errata that is supposed to be cut and pasted to bring the manual up to date? Surely, it wouldn’t have been much more time consuming for you to have made the changes to the manual itself. The changes all referred to the opperating part of the manual and none to the assembly part. 8 pages of revision in a 27 page document is way too much. 73, Byron N6NUL - Northern California Contest Club - CU in the 2011 Cal QSO Party 1-2 Oct 2011 - www.cqp.org __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3 loss of output power
I should have mentioned in the original mail that I have been watching the rig on a couple of occasions when the problem has occurred, and there is no sign of the HI SWR warning, or any other warning, on the display. 73, -- Mike, M0PRL / VP8DMH On 17/Apr 18:49, Mike Clarke wrote: Hi all, My K3 has recently developed a fault that causes a sudden loss of output power. I can be happily transmitting, then suddenly I hear what sounds like a relay click. The rig remains in TX mode, but the RF power meter drops down to nothing. Turning the rig off and back on again fixes the problem for a short period, before it happens again. My suspicion is that something is causing the KPA100 to trip out; the rig has spent quite a bit of time being bounced around in planes of late, so my first thought was that one of the boards might have been bounced loose. Before I take the whole thing to pieces though, has anyone else experienced a similar fault? Thanks and 73, -- Mike, M0PRL / VP8DMH __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] [K2] 60W temperature controlled iron
Wayne - OK, your solder station is a new OEM model from Circuit Specialists, that has been recently introduced. It is a micro-processor controlled station (temperature controlled) .. at an attractive price. Does it use the same soldering tips as the Hakko 907 pencil ?? -- I am aware of Circuit Specialists in Arizona. They have previously have sold OEM product manufactured in Eastern Asia (Solomon in Taiwan, Aoyue, others), based on Hakko 926 / 936 designs from Japan. Earlier OEM models (no longer offered) were direct copies of Hakko -- which prompted litigation against those firms (China has been slow in protecting or respecting patents, copyrights, etc.) Your soldering iron pencil / iron is modeled after the Hakko 907 iron (ceramic heater) and used by many Eastern mfg. This ceramic heater design perfected by the Japanese (heavy gov't RD for auto industry originally) and the ceramic heater in soldering pencils was first seen with Ungar models made in USA (California) in 1980s. Hakko USA - Hakko 936-12 that uses 907 pencil/handpiece http://www.hakkousa.com/detail.asp?CID=49,112PID=1250Page=1 Hakko recently discontinued the 936 model. List of discontinued Hakko models: http://www.hakko.com/english/discontinue/index.html Greg w9gb IF I remember correctly, many of these are Hakko clones Greg, It's a Circuit Specialists house brand: http://www.circuitspecialists.com/prod.itml/icOid/10369 When I take off the tip and expose the element, it's glowing a dull orange. If I blow on it, it glows brighter. When I stop blowing, it goes back to dull orange. That's the only direct evidence I have that it is temperature controlled. It's no Cadillac, and reprogramming the presets is maddening, but it seems to work. At least, I'm making acceptable joints with it. No cold joints, most joints have the proper concave filet (a few might be just a wee bit convex, but no big balls of solder in any case), and full coverage of the pad. I've got that one to three second temperature dialed in. Wayne Conrad __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] P3 Manual Updates
Bill - If Elecraft had printed off 1000 copies of the manual, it would have been a waste of paper and the rain forest for the manuals to have been pulped and new ones printed when a couple of sheets of updates could be produced instead. OTOH, a new manual could be produced and the price of the P3 could be increased accordingly - I think not. If anyone is able to assemble a P3, surely it's not beyond their capability to make the appropriate changes to the manual. [Grumpy mode off] Enjoy your P3, Bill. 73 de David G4DMP In a recent message, Bill Henderson b...@brofcally.plus.com writes Why on earth did it come with a manual and a list of errata that is supposed to be cut and pasted to bring the manual up to date? Surely, it wouldn’t have been much more time consuming for you to have made the changes to the manual itself. -- + - - - - - - - - - - - - - - - - + | David M Pratt, Kippax, Leeds. | | Website: http://www.g4dmp.co.uk | + - - - - - - - - - - - - - - - - + __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] P3 Manual Updates
On 4/17/2011 7:42 AM, Bill Henderson wrote: 8 pages of revision in a 27 page document is way too much. What you're complaining about is one of Elecraft's greatest strengths. When Yaecomwood upgrades a product, it gets a new model number, and if you already own the older one, you have to buy the new one and sell the old (at a loss, of course) to get the improvements. Elecraft has done it very differently -- they have designed a radio that is both modular and utilizes DSP extensively in a manner that allows major upgrades simply by rewriting firmware that programs the DSP, that we download and install. Those improvements, mostly new features and more flexible use of controls, must be described in the manual operationally, hence the revisions. All that is free to users, but it certainly isn't free for Elecraft. And occasionally upgrades are made to the hardware, some of which can be purchased by owners. Like you, I consider the errata to be a huge PITA -- what is needed is a manual that is continuously updated and downloadable with all the changes integrated in a logical stream. That happens periodically with Elecraft manuals -- I downloaded a new K3 manual a year or two ago then printed out pages with significant changes and stuck them between pages in the manual that had come with the radio. I haven't taken the time to see if a new P3 manual is available, but firmware for the P3 is still evolving, with VERY useful features being added as they are suggested by users and can be implemented. 73, Jim Brown K9YC __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] P3 Manual Updates
Hi I have been shown the instruments of torture. I recant. How about giving the option of being able to download Word versions so that the cutting an pasting can be done on my pc? I'm still recanting so there's no need to duff me up. Bill GM0VIT -- View this message in context: http://elecraft.365791.n2.nabble.com/P3-Manual-Updates-tp6281092p6281307.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] Manual Updates
Dear list: It seems to me that these days the whole idea of a printed manual is somewhat beyond the pale. Elecraft makes these manuals the corresponding errata available in *.pdf form for anyone to download, and we should be thankful that we have access to these files. They were doubtless composed upon a word processor capable of saving (publishing) in *.pdf format, and it is a considerable additional expense for Elecraft to distribute these documents in tree-consuming form. While the original files are not editable in Acrobat, *.pdf file editors are available for free or for nominal cost on the internet, so one can edit the errata directly into the manual without difficulty. This is the way I have managed the errata sheets, but for obvious reasons I have either used a separate color or an ancillary notation to indicate that the additions were made by me upon the original Elecraft document for my own consumption. The editing software insists on changing the name of the file as well, so that anyone can see that it was not the original. John Ragle -- W1ZI = On 4/17/2011 11:38 AM, Someone wrote: Why on earth did it come with a manual and a list of errata that is supposed to be cut and pasted to bring the manual up to date? Surely, it wouldn’t have been much more time consuming for you to have made the changes to the manual itself. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] K2 Ladder Line Run for Dipole
Hi: I have completed assembly of my K2 TX serial 7059, an elecraft balun, the K2 SSB adaptor, 100 W adaptor and elecraft KAT 100 antenna tuner. I also just raised an 80 meter dipole in my yard. I have several hundred feet of ladder line attached to the dipole. I ran some of this ladder line toward my house, with its first stop being attached to our shed. From there it goes underneath a deck that has very little crawl space. It runs 16 feet from one end of the deck to the other. On this other end of the deck, I will need to run it against the house anaother 16 feet, turn a corner and run about 20 feet to a point where it will come into the house. I am taking my information on how to make a spark arrestor from the web site www.athensarc.org/ladder.asp It seems to me the best place to put a ground rod and spark arrestor would be out near the shed, right below the dipole feedpoint. The reason I am thinking so, is that if lightning does strike, it would enter the ground out there, away from the house. If I put the spark arrestor and ground rod near the entry point to the house, then lightning would travel under my deck, onto my house siding and then enter the spark arrestor and ground rod only after running half the perimeter of my house across my nice Canadian cedar siding. So my question is, where would the best place be for the ground rod and lightning arrestor. At the entry point to the house, or out beneath the dipole center feedpoint? 73 de WN2K Paul Agoglia __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] P3 Manual Updates
Our normal standard for errata sheets is *one* page, max, whenever possible. The P3 errata you mentioned is an anomaly. We're going to be integrating all errata as quickly as possible. 73, Wayne N6KR On Apr 17, 2011, at 9:21 AM, Jim Brown wrote: On 4/17/2011 7:42 AM, Bill Henderson wrote: 8 pages of revision in a 27 page document is way too much. What you're complaining about is one of Elecraft's greatest strengths. When Yaecomwood upgrades a product, it gets a new model number, and if you already own the older one, you have to buy the new one and sell the old (at a loss, of course) to get the improvements. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] P3 Manual Updates
Do you have a method of submitting errata? de Fred, AE6QL -Original Message- From: elecraft-boun...@mailman.qth.net [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Wayne Burdick Sent: Sunday, April 17, 2011 10:29 AM To: j...@audiosystemsgroup.com Cc: elecraft@mailman.qth.net Subject: Re: [Elecraft] P3 Manual Updates Our normal standard for errata sheets is *one* page, max, whenever possible. The P3 errata you mentioned is an anomaly. We're going to be integrating all errata as quickly as possible. 73, Wayne N6KR On Apr 17, 2011, at 9:21 AM, Jim Brown wrote: On 4/17/2011 7:42 AM, Bill Henderson wrote: 8 pages of revision in a 27 page document is way too much. What you're complaining about is one of Elecraft's greatest strengths. When Yaecomwood upgrades a product, it gets a new model number, and if you already own the older one, you have to buy the new one and sell the old (at a loss, of course) to get the improvements. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] [K3] Sudden loss of output power
Mike, This was one of the many different symptoms I had as a result of bad contacts on the 4 front panel connectors. Remove the front panel, not forgetting to take out that 3D block screw on the left hand side, give the connectors a good clean and apply a thin film of 'Contralube' or some similar electrical lubricant and replace. 73 Tom G3OLB My K3 has recently developed a fault that causes a sudden loss of output power. ..Mike, M0PRL / VP8DMH __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K2 Ladder Line Run for Dipole
On 4/17/2011 10:15 AM, Paul Agoglia wrote: It seems to me the best place to put a ground rod and spark arrestor would be out near the shed, right below the dipole feedpoint. Paul, This subject has been beat to death here in recent weeks, and not to start it up again, but in the interest of safety: The ground rod, where ever you put it, must be tied to the ground at your service entrance with a very low resistance conductor. The reason is that, in the event of a nearby strike that induces charge in your antenna system, you want it, your radio chassis, the mains safety ground, and everything else to be at the same potential. That can only happen if the grounds for everything are tied back to the single ground at the service entrance. It really is a safety issue. Now, unfortunately, if your antenna takes a direct strike, you're pretty much hosed. 73, Fred K6DGW - Northern California Contest Club - CU in the 2011 Cal QSO Party 1-2 Oct 2011 - www.cqp.org __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] P3 Manual Updates
Sure. If you notice a documentation problem, please email supp...@elecraft.com . 73, Wayne N6KR On Apr 17, 2011, at 11:20 AM, Fred Townsend wrote: Do you have a method of submitting errata? de Fred, AE6QL -Original Message- From: elecraft-boun...@mailman.qth.net [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Wayne Burdick Sent: Sunday, April 17, 2011 10:29 AM To: j...@audiosystemsgroup.com Cc: elecraft@mailman.qth.net Subject: Re: [Elecraft] P3 Manual Updates Our normal standard for errata sheets is *one* page, max, whenever possible. The P3 errata you mentioned is an anomaly. We're going to be integrating all errata as quickly as possible. 73, Wayne N6KR On Apr 17, 2011, at 9:21 AM, Jim Brown wrote: On 4/17/2011 7:42 AM, Bill Henderson wrote: 8 pages of revision in a 27 page document is way too much. What you're complaining about is one of Elecraft's greatest strengths. When Yaecomwood upgrades a product, it gets a new model number, and if you already own the older one, you have to buy the new one and sell the old (at a loss, of course) to get the improvements. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] K3_P3_160_CW
Wayne, While working 160M DX last winter I noticed that when I Switch from RX antenna (Beverage) and back to TX antenna That the base line (Noise floor) on the P3 was about 2 S unites Less than when I changes to the RX antenna. With the default antenna ( TX antenna ) PreAmp = off and ATT = ON Switch to RX antenna (with the preamp off) turn the preamp on and switch back to normal antenna. Now if you switch the preamp on and off, the base line will return to normal. Hard for me to explain. Thanks Ken K5DNL __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] Multi-band (Fan) Dipoles
On a similar vein... I've seen in the past an antenna that used to be a common 'emergency' antenna. I cant remember the name or dimensions, so hopefully someone can understand my description and point me to additional information. The mult-band antenna is similar to a 3 wire fan dipole, but the elements are generally paralleled (not 'fanned out). A dumb ascii art diagram follows with the feedpoint (a), only half of the symmetrical antenna is shown - The middle element is approximately the length of the dipole, - one of the outside elements is only about 70% of the full length, - the last and longest element is folded around the end of the middle wire with a gap (b) between the end of the short wire and the long wire. (generally the guy wire is attached at the fold point (c) dumb ascii art -. (b) -- / \ / \ (a) - |--(c) (guy) \ / \___/ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] Elecraft SSB Net results (4-17-11)
Propagation was OK. Nothing too long however. The frequency (14.316 MHz) was plagued by some type of pulsed QRM - short pulses at about a 2 second interval, about S6 here in Oregon with my antenna pointed east. I was able to copy through it without too much trouble. We had 25 participants over a 21 minute period. Here is the list of participants. Station NameQTH Rig S/N WB6CLZ MikeCA K3 4522 W6CGDickCA K3 3697 N6JWJohnCA K3 936 W0RSR MikeCO K2 5767 K4GCJ Gerry NC K3 1597 KO5YKen NM K3 4442 NF4LMikeFL K3 3935 KE4WY Jim KY K3 4864 KA0NCR Arnie NE K3 185 NT5QDon TX K3 4179 AC0NM Glenn CA K3 2843 W4RKS Jim AL K3 3618 K5OAI Sam TX K3 4123 W2RWA DickNY K3 2603 W4PFM PaulVA K3 1673 W8OVDaveTX K3 3139 N0RIE GeneCA FT100D KG8YT Bruce MI K3 5201 W6GFGeorge CA K3 4452 KK7PLyleWA K3 3036 AB7CE Roy MT K2 40 (QRP) N1JMJohnAZ K3 2555 KD0HII Brian IA K3 3672 KD5ZVE Jimmy OK FT897 NS7PPhilOR K3 1826 73, Phil, NS7P __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] Elecraft SSB Net results (4-17-11)
...The frequency (14.316 MHz) was plagued by some type of pulsed QRM - short pulses at about a 2 second interval, about S6 here in Oregon with my antenna pointed east. I was able to copy through it without too much trouble. I noticed it too, and found that using AutoNotch reduced it enough to hear some weak stations through it. 73, Lyle KK7P __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] 110/120 watts
Thanks to ALL who replied on my now 110 watt K3 ! Rich KC8HMJ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] Elecraft K-3 for sale
Is it sold? Nick -- View this message in context: http://elecraft.365791.n2.nabble.com/Elecraft-K-3-for-sale-tp6099622p6282240.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] View message in context
I see these emails from the Elecraft list quite often, someone responding to another person's earlier post, but no text quoted from the earlier message. There is just the View this message in context text as shown below. I don't care to open another page to see what the previous message was about, so usually just delete these messages. I have checked my subscription options on http://mailman.qth.net/mailman/listinfo/elecraft , but see no way to change this. Is there a way to change options to actually see the previous message without going somewhere else to look at it? I went to nabble.com, but couldn't find Elecraft or any way to make any changes there. Thanks --- 73, Tim - N3XX -- View this message in context: http://elecraft.365791.n2.nabble.com/Elecraft-K-3-for-sale-tp6099622p6282240.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3_P3_160_CW
The P3 keeps track of the preamp/attenuator status reported by the K3 so that the dBm or S-unit display reads accurately. That can lead to some non-intuitive behavior. For example, turning on the K3 preamp typically makes the noise level on the P3 go down rather than up. The reason is that the P3 is turning down its gain to compensate for the increased gain in the K3. However this doesn't always work correctly when switching the RX antenna on the K3. Currently the K3 does not send an update to the P3 if switching antennas causes the preamp or attenuator status to change. This is on Wayne's bug list. Alan N1AL On Sun, 2011-04-17 at 12:21 -0700, Ken Roberson wrote: Wayne, While working 160M DX last winter I noticed that when I Switch from RX antenna (Beverage) and back to TX antenna That the base line (Noise floor) on the P3 was about 2 S unites Less than when I changes to the RX antenna. With the default antenna ( TX antenna ) PreAmp = off and ATT = ON Switch to RX antenna (with the preamp off) turn the preamp on and switch back to normal antenna. Now if you switch the preamp on and off, the base line will return to normal. Hard for me to explain. Thanks Ken K5DNL __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] [K2] 60W temperature controlled iron
On 04/17/2011 08:38 AM, G. Beat wrote: OK, your solder station is a new OEM model from Circuit Specialists, that has been recently introduced. It is a micro-processor controlled station (temperature controlled) .. at an attractive price. Does it use the same soldering tips as the Hakko 907 pencil ?? G., I don't know how to tell. Wayne Conrad __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html