[Elecraft] PR6 6 Meter Receive Preamp For Sale

[N8UM]

PR6 6 Meter Receive Preamp For Sale.  $70  I pay shipping CONUS.

 

John B.  N8UM  Oak Ridge, Tennessee

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] Another KIO3 for the cost of shipping

[Bruce Nourish]

It's gone!

On Thu, Aug 25, 2016 at 5:56 PM Bruce Nourish  wrote:

> I swapped out my KIO3 for the new KIO3B. No known problems with the old
> one; I'll ship it anywhere for the cost of postage (TBD based on your
> address). Payment by Paypal.
>
> Bruce
>
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] Another KIO3 for the cost of shipping

[Bruce Nourish]

I swapped out my KIO3 for the new KIO3B. No known problems with the old
one; I'll ship it anywhere for the cost of postage (TBD based on your
address). Payment by Paypal.

Bruce
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] Milliwatt meter calibration for K3

[Don Wilhelm]

Mike,

I am going to assume you are referring to the TX Gain Calibration - 
which can be done using K3 Utility.


If you are instead referring to the Wattmeter calibration, then refer to 
the manual - that cannot be done with K3 Utility.  You can calibrate the 
K3 wattmeter to any wattmeter you have and can trust its readings.  The 
K3 will then be as accurate as your external wattmeter.
If you have an accurate RF Voltmeter, it will be more accurate than the 
external wattmeter.  Adjust as indicated in the K3 manual.


73,
Don W3FPR

On 8/25/2016 5:32 PM, Mike Weir wrote:

Good afternoon all, I have the Elecraft K3 (not K3S) and was wondering if you 
can do the Milliwatt meter calibration with the K3 utility?




__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] WTB - SP3

[pkhjr via Elecraft]

Anyone have an SP3 they would like to sell?  Email me at ka5y at yahoo with
price and condition.

Paul
ka5y



--
View this message in context: 
http://elecraft.365791.n2.nabble.com/WTB-SP3-tp7621812.html
Sent from the Elecraft mailing list archive at Nabble.com.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] Milliwatt meter calibration for K3

[Mike Weir]

Good afternoon all, I have the Elecraft K3 (not K3S) and was wondering if you 
can do the Milliwatt meter calibration with the K3 utility?

Mike

VE3WDM
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] KIO3 available for cost of shipping -SOLD

[mike]

Already gone. Thanks  73  ..mike  AI6II



--
View this message in context: 
http://elecraft.365791.n2.nabble.com/KIO3-available-for-cost-of-shipping-SOLD-tp7621809.html
Sent from the Elecraft mailing list archive at Nabble.com.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] Filter setting

[Chris Kimball]

Dear Joe,

That (the data mode) was it!  Once I set the data mode to DATA A on 40m 
I could do what I wanted.

I have lots to learn here!

Thanks for you quick and on-the-spot reply!

Best wishes,

Chris

NQ8Z






--
View this message in context: 
http://elecraft.365791.n2.nabble.com/Filter-setting-tp7621800p7621808.html
Sent from the Elecraft mailing list archive at Nabble.com.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] Filter setting

[Chris Kimball]

Dear Joe,

Thanks!

I'll bet the DATA X mode is band specific!

I had carefully set DATA A on 80m and on 80m I can set the center 
frequency as I'd like it.  That's where I usually operate in the data mode.

Today, I was on 40m, where I don't normally work data.  I'll bet I 
haven't set DATA A for 40m.

Could that be it? I'll give it a try.

Best wishes,

Chris






--
View this message in context: 
http://elecraft.365791.n2.nabble.com/Filter-setting-tp7621800p7621807.html
Sent from the Elecraft mailing list archive at Nabble.com.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] KIO3 available for cost of shipping

[mike]

Just had Elecraft install the the KIO3B upgrade in my K3 and have the old
KIO3 available for anyone who wants it. I have no reason to believe it won't
work (it was working fine when I had the upgrade done) but sold as is, no
guarantee, no return. Cost is $15 to cover USPS priority mail to CONTUS
only. PayPal only. Thanks  73 ..mike  AI6II



--
View this message in context: 
http://elecraft.365791.n2.nabble.com/KIO3-available-for-cost-of-shipping-tp7621806.html
Sent from the Elecraft mailing list archive at Nabble.com.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] K1 For Sale!

[rfphelps]

I have my carefully constructed K1, with the following features, for sale:

. s/n 0867

. Four-band board (40, 30, 20 & 15 meters) with latest trimmer
capacitor mods installed

. Firmware 1.09E

. Internal antenna tuner

. Noise blanker

. LCD backlight kit installed

. VFO linearization mod installed

. Original 40 / 20 meter two-band board (not installed)

. Hard copies of all documentation

 

Everything is completely functional and in excellent condition!  The rig has
been used recently.

 

Asking $335, including shipping - con US sales only, please!

 

Please contact me off-list at K1SWatARRLdotnet.

 

Regards,

Dick Phelps, K1SW

 

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] Filter setting

[Joe Subich, W4TV]

> When I switch to the data mode, however, the lowest center frequency I
> can obtain is 1.1 kHz.

Which data sub-mode?  In DATA A, although I do not have a 1 KHz IF
filter, I can run the center frequency all the way down to 400 Hz if
I want (not that a center frequency that low is particularly useful).

73,

   ... Joe, W4TV


On 8/25/2016 2:30 PM, Chris Kimball wrote:

I'm having confusion about setting the receive filters.

I'd like to have a 1 kHz wide filter at 1 kHz, that is, with a passband from
500 to 1500 Hz. My rig has a 1 kHz wide roofing filter.  In CW mode I can
manipulate the bandwidth/center frequency controls so that the bandwidth is
1000 Hz and the center frequency is 1000 Hz, and the roofing filter is 1000
Hz.  When I switch to the data mode, however, the lowest center frequency I
can obtain is 1.1 kHz.  The roofing filter is still 1000 Hz.  Even when I
reduce the bandwidth, I can't push it lower.

Must be something obvious!





--
View this message in context: 
http://elecraft.365791.n2.nabble.com/Filter-setting-tp7621800.html
Sent from the Elecraft mailing list archive at Nabble.com.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to li...@subich.com


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] KPod self modifying macros?

[Don Wilhelm]

Jim,

I don't think the MN110 function will work with the K-Pod (at least not 
right now).
My reasoning -- the macros you have written assign the function to a K3 
button, then you reassign that *button* to another macro - so the macro 
assignment will toggle with subsequent presses of *that* button.  The 
macro is not altered, just the K3 button it is assigned to.


With the K-Pod - the buttons are assigned to the *macros* and not to the 
K3 buttons.  Macro1 will always be assigned to K-Pod F1 hold, and Macro2 
will always be assigned to K-Pod F2 hold.


When you use the macro to re-assign the K3 button to another macro, it 
will change the function of the K3 button.  However, the K-Pod buttons 
are not mapped to the K3 buttons, but rather to the Macros directly.


Unless you can work out a way to modify the macro itself, what you want 
to achieve cannot happen.


73,
Don W3FPR


On 8/25/2016 2:44 PM, Jim Miller wrote:

I've been using the MN110 function to assign a new macro to the currently
pressed button to switch to a different macro. That macro then uses the
MN110 function to restore the previous macro to that switch after
performing its functions.  In other words, the macro is not "self modifying", 
it simply reassigns a different macro to the button.

Is there a way to make the macros on the KPOD self modifying in this way?
It is not obvious since the K-Pod buttons always perform the same macros.

In my case a PF1 on the K3 performs macro1 which is split, sub on, up one
and switches to Macro2. A subsequent PF1 on the K3 clears all out and
switches back to Macro1.

On the KPOD a F1-Hold executes Macro1 but the switch to Macro2 never
occurs. A subsequent hold of F1 merely repeats the Macro1. It requires
F2-HOLD to execute the MACRO2.




__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] KPod self modifying macros?

[Jim Miller]

These "self modifying macros" really just assign another macro to a switch
via the MACRO menu command. I don't see any way of identifying the KPOD
switch names to make that possible.

Perhaps the new switch identifiers come along with the new firmware (now in
field test) documentation?

thanks

jim ab3cv

On Thu, Aug 25, 2016 at 2:44 PM, Jim Miller  wrote:

> I've been using the MN110 function to assign a new macro to the currently
> pressed button to switch to a different macro. That macro then uses the
> MN110 function to restore the previous macro to that switch after
> performing its functions.
>
> Is there a way to make the macros on the KPOD self modifying in this way?
> Not obvious since the buttons always perform the same macros.
>
> In my case a PF1 on the K3 performs macro1 which is split, sub on, up one
> and switches to Macro2. A subsequent PF1 on the K3 clears all out and
> switches back to Macro1.
>
> On the KPOD a F1-Hold executes Macro1 but the switch to Macro2 never
> occurs. A subsequent hold of F1 merely repeats the Macro1. It requires
> F2-HOLD to execute the MACRO2.
>
> So how does one do self modifying macros on the KPOD to perform a toggle
> for instance?
>
> Thanks
>
> jim ab3cv
>
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] KPod self modifying macros?

[Jim Miller]

I've been using the MN110 function to assign a new macro to the currently
pressed button to switch to a different macro. That macro then uses the
MN110 function to restore the previous macro to that switch after
performing its functions.

Is there a way to make the macros on the KPOD self modifying in this way?
Not obvious since the buttons always perform the same macros.

In my case a PF1 on the K3 performs macro1 which is split, sub on, up one
and switches to Macro2. A subsequent PF1 on the K3 clears all out and
switches back to Macro1.

On the KPOD a F1-Hold executes Macro1 but the switch to Macro2 never
occurs. A subsequent hold of F1 merely repeats the Macro1. It requires
F2-HOLD to execute the MACRO2.

So how does one do self modifying macros on the KPOD to perform a toggle
for instance?

Thanks

jim ab3cv
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] Filter setting

[Chris Kimball]

I'm having confusion about setting the receive filters.  

I'd like to have a 1 kHz wide filter at 1 kHz, that is, with a passband from
500 to 1500 Hz. My rig has a 1 kHz wide roofing filter.  In CW mode I can
manipulate the bandwidth/center frequency controls so that the bandwidth is
1000 Hz and the center frequency is 1000 Hz, and the roofing filter is 1000
Hz.  When I switch to the data mode, however, the lowest center frequency I
can obtain is 1.1 kHz.  The roofing filter is still 1000 Hz.  Even when I
reduce the bandwidth, I can't push it lower.

Must be something obvious!





--
View this message in context: 
http://elecraft.365791.n2.nabble.com/Filter-setting-tp7621800.html
Sent from the Elecraft mailing list archive at Nabble.com.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] K-POD Macros

[K6CTA via Elecraft]

After seeing that the LED programming functionality for the K-POD was 
available, I received the beta for the utility and the firmware for the POD. 
Very cool. I'm not sure what others are doing, but here is how I have my K-POD 
programmed:

F1 - tap turns on D1, puts radio in split, turns on sub rx and moves xmtr up 2. 
Hold clears all and turns D1 off

F2 - tap turns on D2 and does the same as above but up 5. Hold clears

F3 - tap is Mon on, hold is Mon off

F6 - tap turns on XIT and lights D3; hold turns XIT off and turns off D3

F7 - tap clears RIT

F8 - tap turns on RIT and lights D4; hold turns off RIT and D4.

It's all pretty convenient (for me, at least!)...

73,
Ed K6CTA

Sent from my iPhone



__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] F/S: N8BX Heavy K3/K3S Tuning Knobs

[Robert S. McCuskey]

SOLD: N8BX Heavy Tuning Knobs for K3/K3S have been sold .  Thanks for the
inquiries.   73, Bob  W7BV

 

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] Display Text Decoding on the screen

[j...@kk9a.com]

I think that would be a nice feature for the casual RTTY operator.

John KK9A

>From Wayne Burdick n6kr
Wed Aug 24 20:23:22 EDT 2016

Small matter of programming.

There's plenty of code space, but just one lonely guy--Paul--tackling the
wish-list, working in the bleak silence of the after-hours, armed with a
keyboard and a slice of stale pizza but without so much as a small dog to
keep him company. I can try slipping him an extra can of Jolt, but no
guarantees.

Wayne,
N6KR


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] OT: FS: Vibroplex VibroCube paddles

[Jim Sheldon]

Anybody with a heavy fist like mine and need something that is hard to 
move around on your operating desk when you send CW?  I have for sale an 
excellent condition Vibroplex VibroCube set of paddles.  This is 
actually the Standard, Upgraded model with the jeweled pivot bearings 
and the black crinkle powder coat finish.  It's around 2 years old and I 
don't use it anymore as I was digging through some old stored boxes from 
my military career and I found the old Vibroplex "Vibro Keyer" paddles I 
originally learned to send CW on, way back in 1962 so they are now 
clamped to my desk.


This VibroCube, serial number 404755, is current manufacture and the 
Standard upgraded model sells for $229.95 plus shipping from Vibroplex 
(www.vibroplex.com).  That's what I paid for it when I bought it around 
2 years ago.  I'll let this one go for $160 and you pay the USPS (Medium 
flat rate box) shipping.  I'd prefer to sell this in the U.S. as 
international shipping has gotten almost impossibly high priced.  I'd 
prefer PayPal, but will take USPS money orders.


Please keep any replies off the reflector - email address is 
w...@cox.net  First "I'll take it" (by date/time on the email) gets 
right of first refusal.  Pictures are available via email.


Jim Sheldon, W0EB
Park City, KS

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] [Off topic] RSGB promotional video link

[Doug Turnbull]

Friends,
The following is a link to an RSGB promotional video for amateur radio.
It features youth and also has some nice shots of Elecraft radios in use.
To me it is well done.   

https://www.youtube.com/watch?v=8x6x_6mDVlQ&feature=youtu.be

  73 Doug EI2CN


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to turnb...@net1.ie

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] K-3 Upgrade

[David Robertson]

Louis,
I would strongly recommend testing your K3 after EACH upgrade is installed.
Do not install everything, then test as you could run into problems.
73

-- 
Dave Robertson KD1NA
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] F/S: N8BX Heavy K3/K3S Tuning Knobs

[Robert S. McCuskey]

F/S: N8BX Heavy Tuning Knobs for K3/K3S ,  Black, in excellent condition, no
blemishes, etc., VFO A and B, plus the newer model VFO A with ball bearing
dimple, now excessive to my needs,  pictured in eHam.net listing, asking
$125 for all three shipped USPS Priority CONUS, PayPal preferred or USPS
Money Order, email: w7bv at comcast dot net.  73, Bob

 

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] K3 Utility for Mac

[Tom Morehouse]

Any idea of when the K3 Utility for Mac will be updated?  
Tom K4AEN
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] [PX3SVGA] PX3 Internal SVGA Large Screen Adapter

[Michael Blake]

Joe, don’t forget that the “Win4K3” software offers a large screen pan adapter 
for the KX3 including point and click and other great KX3 stuff.  When at home 
and in need of a pan adapter I use this software.  Works quite well.
 
Michael Blake
k9...@mac.com 






> On Aug 25, 2016, at 12:56 AM, Joe Stone (KF5WBO)  
> wrote:
> 
> 
> Hi Wayne,
> 
> What's the best way to move a PX3 Internal SVGA Large Screen Adapter up the
> priority list?  What's the best way to gauge interest?  I don't imagine you
> want a bunch of "I want one", "Count me in", ... posts to the reflector.  Do
> we have a polling mechanism (other than through the KX-line Yahoo! group)?
> 
> 73's
> 
> Joe
> KF5WBO
> 
>> Hi Joe, 
>> 
>> The hooks are in place, but I can't say for sure that we'll offer one. 
>> 
>> 73, 
>> Wayne 
>> N6KR 
> 
>>> Thank you, Wayne.  On a related topic ... 
>>> 
>>> What's the history of the PX3SVGA (i.e., an internal SVGA large screen 
>>> adapter for the PX3) or lack there of? 
>>> 
>>> 73's 
>>> 
>>> Joe 
>>> KF5WBO
> 
> 
> 
> --
> View this message in context: 
> http://elecraft.365791.n2.nabble.com/PX3SVGA-PX3-Internal-SVGA-Large-Screen-Adapter-tp7621788.html
> Sent from the Elecraft mailing list archive at Nabble.com.
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to k9...@mac.com

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] [PX3SVGA] PX3 Internal SVGA Large Screen Adapter

[Jim Brown]

On Wed,8/24/2016 9:56 PM, Joe Stone (KF5WBO) wrote:

What's the best way to move a PX3 Internal SVGA Large Screen Adapter up the
priority list?


Drag an SVGA monitor a couple of miles up a trail to a mountain peak and 
take a picture of your setup. :)


73, Jim K9YC

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com