Re: [Elecraft] N1MM+ & K3/K3s & Diversity
That is purely an N1MM problem, Gary. The same thing happened to me a few times. It was annoying. I bet I could tell you exactly what button pushes caused it to do that, but I'd have to go think about it some. By the way, the 3 dB loss at that frequency that you incur from the diversity receive setup is totally inconsequential. You do not give up any sensitivity whatsoever. In fact, it's probably desirable to have the ATT on all the time on 160 anyway, in addition to any splitter loss. See a previous post I made concerning this very question: http://elecraft.365791.n2.nabble.com/When-do-I-need-atten-or-preamp-td7616174.html#a7616249 R, Al W6LX From: Gary SmithTo: elecraft@mailman.qth.net Sent: Sunday, December 3, 2017 9:10 PM Subject: [Elecraft] N1MM+ & K3/K3s & Diversity I worked the ARRL 160 this last weekend, ran QRP. I had a couple technical problems that came up, one relates to the K3s. I'm asking here first if someone has experienced this. I prefer running the K3s in Diversity in the contests. I find it is more helpful to take the -3 dB loss (or whatever it is) when using diversity than to hear louder when only using the one Rx. Diversity helps in the tough times to allow me to hear almost undecipherable details when the band condition collapses. During the contest the K3s would slip out of diversity and leave the Rx at a previous point and I would also hear the VFO A frequency. It got confusing when this happened and no, I didn't bump the diversity button accidentally. I was using the Marker A & encoder on the P3 to navigate me through the signals, not the VFO A knob. I never saw it happening, it would be a discovery when I would hearing a call I'd worked earlier while onto a new station to listen to and I'd see the diversity light was not flashing but the sub RX was still engaged. I never looked to see if it was the last station I worked or back farther. The one possible time I might have noticed something happening was when I heard the the effect of listening to the VFO B knob turning on the crowded band while listening to a fixed signal on VFO A. I noticed the effect, looked at the K3s and sure enough the diversity had somehow unlocked. (What I have no idea of is if that sound was someone QSYing or my radio QSYing) This happened 5-6 times in the contest. It never has happened before that I remember. Also using Win4K3Suite (good program) & K1EL's USB winkey at the same time with N1MM. Any idea what might be happening and how to prevent it from doing this again? Thanks & 73, Gary KA1J __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to alor...@sbcglobal.net __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] N1MM+ & K3/K3s & Diversity
I worked the ARRL 160 this last weekend, ran QRP. I had a couple technical problems that came up, one relates to the K3s. I'm asking here first if someone has experienced this. I prefer running the K3s in Diversity in the contests. I find it is more helpful to take the -3 dB loss (or whatever it is) when using diversity than to hear louder when only using the one Rx. Diversity helps in the tough times to allow me to hear almost undecipherable details when the band condition collapses. During the contest the K3s would slip out of diversity and leave the Rx at a previous point and I would also hear the VFO A frequency. It got confusing when this happened and no, I didn't bump the diversity button accidentally. I was using the Marker A & encoder on the P3 to navigate me through the signals, not the VFO A knob. I never saw it happening, it would be a discovery when I would hearing a call I'd worked earlier while onto a new station to listen to and I'd see the diversity light was not flashing but the sub RX was still engaged. I never looked to see if it was the last station I worked or back farther. The one possible time I might have noticed something happening was when I heard the the effect of listening to the VFO B knob turning on the crowded band while listening to a fixed signal on VFO A. I noticed the effect, looked at the K3s and sure enough the diversity had somehow unlocked. (What I have no idea of is if that sound was someone QSYing or my radio QSYing) This happened 5-6 times in the contest. It never has happened before that I remember. Also using Win4K3Suite (good program) & K1EL's USB winkey at the same time with N1MM. Any idea what might be happening and how to prevent it from doing this again? Thanks & 73, Gary KA1J __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] K2 Internal Battery Question
I have a K2 with the internal battery option which I trickle charge with an A Engineering smart charger. I've installed the Smart Charger according the method suggested by Don, W3FPR on his web site. I've had this arrangement for several years and the battery has charged faithfully and I have been served well by the charger. However, now I am noticing that the two lights on the front of the Smart Charger remain on. all of the time. the green LED is labeled "Charging" and the red is "Final Charge" . The K2 meter is showing about 13.4 volts when during this time. Am I to assume that the battery itself is faulty and needs to be replaced (it has been in light service for a good number of years...but connected to the charger the entire time or is the it possible that charger has developed a problem? Any thoughts on this would be very much appreciated. Thanks Tom, WB2QDG K2# 1103 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] 160 meter contest also going on -- LOTS of activity
Another typo: The TX antenna on receive... On 12/3/2017 1:53 PM, Wes Stewart wrote: Even using the RX antenna on receive I hear better than I get out. I need to QRO. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3S New Builder (Tom NB5Q)
Hi Tom, See http://n8ik.net/kitbuilding.php for the build sequence for my K3S. 73, Ian N8IK On Fri, Dec 1, 2017 at 11:11 PM, Tom Norriswrote: > My first post, new builder, old man (74 years young!). I've been inactive > for some time but looking forward to getting back on CW with the new K3S, > P3 kits. I'm sure I will be back here for your valued and experienced > assistance during the build and setup. I have searched for and read a lot > of the posts on the list pertaining to assembling Elecraft kits. Thank you > and I hope to use a lot of the information in those posts. If you have any > up front advice in the assembly or setup of the following parts, I hope you > will share it with me. > > K3S 100W Xcvr. Kit ; P3-K Panadapter Kit; External Speaker; The Elecraft > K3S and P3 by Fred Cady; K3S ATU; K3S Gen. Cov. RX Module; KFL3C-400; 2.8 > for 2.7 kHz swap; KFL3B-FM; P3 Video/FFT Adapt.; P3 TX Monitor Adapt; > 1.8-54 > MHz 200W; incl. P3TXMON > > Thanks a lot, > Tom Norris NB5Q New Mexico > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to iann...@gmail.com > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Yahoo Elecraft KX User Group
Anything that includes the word "Yahoo" is an error message. Jim Rhodes K0XU On Dec 3, 2017 16:28, "Howard Hoyt"wrote: > Jim, > > We are not having any problems with the Yahoo KX3 group, are you sure you > are attempting to log in with the correct email address/Yahoo account? I > have several Yahoo accounts and I have to log out and back in with the > correct one to access a different Yahoo group. > > Send me an email if you continue to have issues. > > Cheers && 73, > > Howie - WA4PSC > Yahoo Elecraft KX Group moderator > > > > Is there something wrong with the KX3 group from > Yahoo? I haven't recieved a digest in days and when I try to get into > the group I get an error message Thanks,Jim W7JHR > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to jimk...@gmail.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] Elecraft CW Net Report
Good Evening, Conditions were not good. Double plus ungood in fact. But I was skunked on neither band. That counts as a win :) I was pushed off the initial net frequency in each case. On 14050.5 kHz at 2300z: W0CZ - Ken - ND N5NF - Watt - TX On 7045.5 kHz at 0100z: K0DTJ - Brian - CA At one point on twenty meters I was chasing an ESP K1J? station but QSB was deep. Deep on both bands. On twenty there was a slow up and down signal overlain by a fast flutter. Forty meters had only the slow QSB but plenty of noise did not help. Maybe the sun will arise from its slumber and hit us with a decent CME late in the week. 73, Kevin. KD5ONS __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Antenna Analyzer (FA-VA4)
Simple. Connect the analyzer output to one antenna, the input to the other. Set the sweep range for that where you want to look at antenna coupling (usually one band for which the antennas are used). Make a sweep and tell the analyzer software to display S21 in dB. S21 is the gain of a device or network. 73, Jim On 12/3/2017 1:16 PM, Dick Green wrote: Jim wrote: Note also that this is a vector NETWORK analyzer. A NETWORK analyzer has input and output ports, so that in addition to impedance and TDR, it can also measure the response of any system. You can, for example, measure the effectiveness of filters, and the coupling between adjacent antennas. Jim, for those of us who haven’t used a network analyzer, how do you use one to measure coupling between antennas? 73, Dick WC1M __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K2 Internal battery question
Tom, The life of an SLA battery is normally 3 to 5 years. You can save the cost of shipping from Elecraft if you have a Batteries plus Bulbs store in your area. The may not have the 2.9AH battery in stock (but they will order it), or you can use the 2.3AH battery which has the same form factor. 73, Don W3FPR On 12/3/2017 5:16 PM, Tom McCulloch wrote: I have a K2 with the internal battery option which I trickle charge with an A Engineering smart charger. I've installed the Smart Charger according the method suggested by Don, W3FPR on his web site. I've had this arrangement for several years and the battery has charged faithfully and I have been served well by the charger. However, now I am noticing that the two lights on the front of the Smart Charger remain on. all of the time. the green LED is labeled "Charging" and the red is "Final Charge" . Am I to assume that the battery itself is faulty and needs to be replaced __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] 160 meter contest also going on -- LOTS of activity
You were quite loud here. You should have been calling CQ. Al W6LX Even using the RX antenna on receive I hear better than I get out. I need to QRO. Wes N7WS __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] Yahoo Elecraft KX User Group
Jim, We are not having any problems with the Yahoo KX3 group, are you sure you are attempting to log in with the correct email address/Yahoo account? I have several Yahoo accounts and I have to log out and back in with the correct one to access a different Yahoo group. Send me an email if you continue to have issues. Cheers && 73, Howie - WA4PSC Yahoo Elecraft KX Group moderator Is there something wrong with the KX3 group from Yahoo? I haven't recieved a digest in days and when I try to get into the group I get an error message Thanks,Jim W7JHR __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] K2 Internal battery question
I have a K2 with the internal battery option which I trickle charge with an A Engineering smart charger. I've installed the Smart Charger according the method suggested by Don, W3FPR on his web site. I've had this arrangement for several years and the battery has charged faithfully and I have been served well by the charger. However, now I am noticing that the two lights on the front of the Smart Charger remain on. all of the time. the green LED is labeled "Charging" and the red is "Final Charge" . Am I to assume that the battery itself is faulty and needs to be replaced (it has been in light service for a good number of years...but connected to the charger the entire time or is the it possible that charger has developed a problem? Any thoughts on this would be very much appreciatued. Thanks Tom, WB2QDG K2# 1103 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] FM mode on KX2 ready to test on 10 meters and with transverters
I have field-test firmware ready for those interested in trying FM mode on the KX2. On 10 meters, FM is useful for both repeaters and simplex FM QRP DXing. For external transverter use, there are programmable band displays (up to 7), as well as a keying output. The implementation includes PL tone encode (TX), programmable repeater offsets, and control of both overall deviation and PL tone deviation. FM mode can be turned off in the menu if it’s not needed. If you’d like to test the new release (rev. 2.87), let me know. 73, Wayne N6KR __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Antenna Analyzer (FA-VA4)
In this case think of the network analyzer as a transmitter with a receiver tuned to the same frequency. Before testing you connect the two together and normalize the receiver response to unity at each test frequency. Now connect the transmitter port to one antenna and the receive port to the other antenna. The response will be some fraction of unity, which can be presented as % transmitted, or more often in dB. Wes N7WS On 12/3/2017 2:16 PM, Dick Green wrote: Jim wrote: Note also that this is a vector NETWORK analyzer. A NETWORK analyzer has input and output ports, so that in addition to impedance and TDR, it can also measure the response of any system. You can, for example, measure the effectiveness of filters, and the coupling between adjacent antennas. Jim, for those of us who haven’t used a network analyzer, how do you use one to measure coupling between antennas? 73, Dick WC1M __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] 10 m RTTY contest still going on; three CA stations calling CQ....
Hi Wayne et all, I'm on 28082 and it's an all WA contest so far. You want to move up from 14082?? Dead band around here also. Have 3 WA contacts with the K3 at 98.2 W. Have fun. 73, Rick, W7LKG -Original Message- From: elecraft-boun...@mailman.qth.net [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Wayne Burdick Sent: Sunday, December 3, 2017 11:23 To: Elecraft ReflectorSubject: [Elecraft] 10 m RTTY contest still going on; three CA stations calling CQ The band sounds dead but dxmaps.com shows some F2 activity as well as sporadic-E. There are three of us clustered around 14082 hoping we re not doing an all-CA contest 73, Wayne N6KR __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to w7...@comcast.net __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Antenna Analyzer (FA-VA4)
Hi, That ought to be fairly straightforward. Connect one antenna to the the output port of the analyzer and the other antenna to the input port. Then set the sweep for the frequency range you want to test. AB2TC - Knut wc1m wrote > Jim wrote: > >> Note also that this is a vector NETWORK analyzer. A NETWORK analyzer has >> input and output ports, so that in addition to impedance and TDR, it can >> also measure the response of any system. You can, for example, measure >> the effectiveness of filters, and the coupling between adjacent antennas. > > Jim, for those of us who haven’t used a network analyzer, how do you use > one to measure coupling between antennas? > > 73, Dick WC1M > > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto: > Elecraft@.qth > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to > lists+1215531472858-365791@.nabble -- Sent from: http://elecraft.365791.n2.nabble.com/ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Antenna Analyzer (FA-VA4)
Jim wrote: > Note also that this is a vector NETWORK analyzer. A NETWORK analyzer has > input and output ports, so that in addition to impedance and TDR, it can also > measure the response of any system. You can, for example, measure the > effectiveness of filters, and the coupling between adjacent antennas. Jim, for those of us who haven’t used a network analyzer, how do you use one to measure coupling between antennas? 73, Dick WC1M __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] 160 meter contest also going on -- LOTS of activity
Let me try this again, I tried to correct a typo and hit send instead. With 500W and an inverted-L with a too sparse radial field I managed to work two EUs, F and EA, new ones for me on 160. I heard OH and SM too but getting past the "gentlemen" on the east coast isn't in the cards. I worked a couple of JAs too, but nothing like my friend N7DD, who was running them. He was hearing some that weren't even there for me. I'm not a contest op but a DXer and pretty much hope that some DX will operate in the contests, but they're looking for points and not especially interested in digging out weak (but workable) stations.. Even using the RX antenna on receive I hear better than I get out. I need to QRO. Wes N7WS On 12/3/2017 12:51 PM, Jim Brown wrote: On 12/3/2017 4:21 AM, Mike VE3YF wrote: Maybe just me, but I have yet to hear or see HI, again they elude me on 160CW With 1500W and very good antennas, I worked one KH6, one VK, 3 RA0, 19 JA, and nothing else anywhere in AS or OC. Thanks to contest scoring rules, participants can only work W/VE stations, and the band is open from these locations to W/VE for brief periods of mutual darkness, peaking around sunrise/sunset at either end. While CQing, I was spotted several times in ZL and VK, but only those responses. ARRL 160 is mainly for the east coast of the US and Canada to work EU and the Caribbean, and most of those stations QRT after EU sunrise. A few of the biggest ones stay around to try to work JA. 73, Jim K9YC __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] 160 meter contest also going on -- LOTS of activity
With 500W and an inverted-L with a too sparce On 12/3/2017 12:51 PM, Jim Brown wrote: On 12/3/2017 4:21 AM, Mike VE3YF wrote: Maybe just me, but I have yet to hear or see HI, again they elude me on 160CW With 1500W and very good antennas, I worked one KH6, one VK, 3 RA0, 19 JA, and nothing else anywhere in AS or OC. Thanks to contest scoring rules, participants can only work W/VE stations, and the band is open from these locations to W/VE for brief periods of mutual darkness, peaking around sunrise/sunset at either end. While CQing, I was spotted several times in ZL and VK, but only those responses. ARRL 160 is mainly for the east coast of the US and Canada to work EU and the Caribbean, and most of those stations QRT after EU sunrise. A few of the biggest ones stay around to try to work JA. 73, Jim K9YC __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] 10 m RTTY contest still going on; three CA stations calling CQ....
Nothing but channel Z down here. WB5TUF Original message From: Wes StewartDate: 12/3/17 14:05 (GMT-06:00) To: elecraft@mailman.qth.net Subject: Re: [Elecraft] 10 m RTTY contest still going on; three CA stations calling CQ If ND2T is one of you he has to listen too. N7WS On 12/3/2017 12:26 PM, Wayne Burdick wrote: > Make that 28082! > > Wayne > > >> On Dec 3, 2017, at 11:23 AM, Wayne Burdick wrote: >> >> The band sounds dead but dxmaps.com shows some F2 activity as well as >> sporadic-E. There are three of us clustered around 14082 hoping we’re not >> doing an all-CA contest >> >> 73, >> Wayne >> N6KR >> __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to wb5...@comcast.net __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] K1 Sold
Thanks for your interest everyone, the K1 I have was sold earlier today. Thanks and 73, KenVE3HLS __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Fan noise on FT8?
On 12/3/2017 6:15 AM, Peter Drexel via Elecraft wrote: The mike is disconnected. If the noise is the noise is like what you hear in the room and the computer is a laptop, could be the computer's built-in mic. :) Check Windows settings. 73, Jim K9YC __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] 10 m RTTY contest still going on; three CA stations calling CQ....
If ND2T is one of you he has to listen too. N7WS On 12/3/2017 12:26 PM, Wayne Burdick wrote: Make that 28082! Wayne On Dec 3, 2017, at 11:23 AM, Wayne Burdickwrote: The band sounds dead but dxmaps.com shows some F2 activity as well as sporadic-E. There are three of us clustered around 14082 hoping we’re not doing an all-CA contest 73, Wayne N6KR __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] 160 meter contest also going on -- LOTS of activity
On 12/3/2017 4:21 AM, Mike VE3YF wrote: Maybe just me, but I have yet to hear or see HI, again they elude me on 160CW With 1500W and very good antennas, I worked one KH6, one VK, 3 RA0, 19 JA, and nothing else anywhere in AS or OC. Thanks to contest scoring rules, participants can only work W/VE stations, and the band is open from these locations to W/VE for brief periods of mutual darkness, peaking around sunrise/sunset at either end. While CQing, I was spotted several times in ZL and VK, but only those responses. ARRL 160 is mainly for the east coast of the US and Canada to work EU and the Caribbean, and most of those stations QRT after EU sunrise. A few of the biggest ones stay around to try to work JA. 73, Jim K9YC __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] 10 m RTTY contest still going on; three CA stations calling CQ....
It's pretty quiet down here in Texas...I'm calling on 28081 but only working locals. Glenn WB5TUF Original message From: Wayne BurdickDate: 12/3/17 13:23 (GMT-06:00) To: Elecraft Reflector Subject: [Elecraft] 10 m RTTY contest still going on; three CA stations calling CQ The band sounds dead but dxmaps.com shows some F2 activity as well as sporadic-E. There are three of us clustered around 14082 hoping we’re not doing an all-CA contest 73, Wayne N6KR __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to wb5...@comcast.net __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] 10 m RTTY contest still going on; three CA stations calling CQ....
Make that 28082! Wayne > On Dec 3, 2017, at 11:23 AM, Wayne Burdickwrote: > > The band sounds dead but dxmaps.com shows some F2 activity as well as > sporadic-E. There are three of us clustered around 14082 hoping we’re not > doing an all-CA contest > > 73, > Wayne > N6KR > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] 10 m RTTY contest still going on; three CA stations calling CQ....
The band sounds dead but dxmaps.com shows some F2 activity as well as sporadic-E. There are three of us clustered around 14082 hoping we’re not doing an all-CA contest 73, Wayne N6KR __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Fan noise on FT8?
Peter, Contact Elecraft support. I believe they have a Fan filter cap mod. 73, Don W3FPR On 12/1/2017 3:42 PM, Peter Drexel via Elecraft wrote: It seems that, when the fan starts on my K3, a series of vertical lines appears on the WSJT Wide Graph. Every 60Hz would be kind of obvious. What's causing that? What can I do about it? (other than keeping the power low enough - 8 watts or less - to keep the fan from kicking in) 73 de Peter, AE1TK3 # 3701 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to donw...@embarqmail.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] [K2] KPA100 Temp Cal: Room temp or radio temp?
Bj, You can look at the fan addition designed by N0SS Tom Hammond (SK) at http://www.mmccs.com/mmarc/n0ss/index_k2.html. Scroll down the page to see the fan assembly on top of his K2/100. 73, Don W3FPR On 12/3/2017 9:31 AM, Bj Rollison wrote: Hi John, I am waiting for my K2/100 kit to arrive and start my project as a Christmas present to myself. I operate a few times a year in Vietnam under conditions similar to those you describe. My main QTH is air conditioned, but I also plan to operate from beach locations and some other areas that are not. This past year I used a K2/10 and an RM Italy HLA 305V amp which has external cooling fans without a problem. But now I plan to upgrade my remote 'shack' with the K2/100, my questions are... Would removing the internal speaker and reversing the fan that comes with the K2/100 so it pulls air through the speaker grill and expels it out the back provide a similar solution to the one you proposed? Is it possible to do that? __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] [K2] KIO2 Aux I/O Module Rev B vs. Rev. C
Bj, As far as I know, there have been no changes in the KIO2 since its first production - and certainly there have been no functional changes. Where did you see the "rev C" - was it on the board? Or is it only on the instructions? The Rev designation for the boards does not track the Rev designation for the manuals. Manuals are updated when a part number or part description needs to be modified. The only difference I can see between the KIO2 Rev B manual and the Rev C manual is that the length of the 4 conductor cable supplied in the parts list is 15 feet instead of the previous 10 feet. As a more extreme example, current K2s use the B level boards, but the K2 manual is a revision I. 73, Don W3FPR On 12/3/2017 11:21 AM, Bj Rollison wrote: I purchased a used K2 (S.N. 01215) with a KIO2 rev. B. This K2 also had the Revision B K2ATOBKT installed. What is the difference between the KIO2 Rev. B and Rev C, and should I consider upgrading this to Rev. C? __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] 160 meter contest also going on -- LOTS of activity
Yep had a blast this weekend with 160! It was very busy. Tom KB5RF On Sat, Dec 2, 2017 at 7:08 PM, Wayne Burdickwrote: > The ARRL 160 m contest is in full swing. See: > >http://www.arrl.org/160-meter > > Sounds like Field Day on the band right now, at least in the CW segment. > Give it a listen. > > 73, > Wayne > N6KR > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to tom.par...@gmail.com > -- - Sales and Marketing Strategies Inspire Curiosity Together 512- 497-5046 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] [K2] KIO2 Aux I/O Module Rev B vs. Rev. C
I purchased a used K2 (S.N. 01215) with a KIO2 rev. B. This K2 also had the Revision B K2ATOBKT installed. What is the difference between the KIO2 Rev. B and Rev C, and should I consider upgrading this to Rev. C? - Thanks Bj WA7WJR XV9WJR -- Sent from: http://elecraft.365791.n2.nabble.com/ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] KX3-2M SMA connector issue
James, I ended up pulling out the 2 meter board and the tuner board (that was about all it takes to get back to the SMA connector) and really tightened the inside screw down a lot more torque than I did the first time. I think I was over cautious when I first assembled the SMA connector. Sure didn't want to start gouging out the opening in the case! So it has been fine since then, however I have been a little more carful when moving the KX3 around with the sma right angle and the whip 2m/440 antenna. I think having a right angle connector there is a little futzy. I have used the radio like a handheld and just attached the whip antenna to the sma direct (wo the right angle adapter) and that works fine. It is actually fun! The heaviest biggest 2 meter ht I ever used since my first HT a Motorola brick lol/ Kinda makes me wish I had gone with the KX2 as It has a built in Mic which is cool. But I love my KX3. I did design a little attachment that bolts to the case and that works, but it is rinky dink. but it does make sure the antenna is supported up from the base so that there is no way it can flop over then. I will send a pic of that to you and the group if anyone wants to see it. Sri it took me a while to get back to you! I need to get my list subscription back to individual emails, have not been able to keep up with replies as easy when it is digest form. So Thank You! To anyone else who replied on this issue (which isn't really an issue just a matter of making sure the SMA connector is mounted securely). I did notice that as I tightened it down snug that there was no evidence that the outside flange (the flange/nut that Elecraft somehow made sure would turn around the threads, don't ask me how they did that!) Anyway it seems that the lock washers bite in pretty well and prevents the connector from turning in the opening. The other option is to look for a beefier lock washer... not sure if one of those split ring type lock washers would give more tension? Anyway... I am shopping for some kind of external 2 meter antenna now, so probably won't be using the whip antenna that much eventually. Could make a j-pole. I am below ground here so it is a challenge to get a good signal out on 2 meters. Anyway. thanks again. probably told you way more than you wanted to read hihi. 73 Merry Christmas to you James~! hope you have a great holiday season. I plan on Santa bringing me all kinds of ham test equipment. Signal Generator, Freq counters antennas analyzers you name it. Mike AB7RU On Mon, Nov 27, 2017 at 9:01 AM, James Austinwrote: > Hi Mike, > > Did you get any useful off list replies to this question? I've had the > same problem. > > Jim/KA2RVO > > On Sun, Nov 19, 2017 at 9:49 PM, Mike Parkes wrote: > >> I ordered the *KX3*-*2M for the KX3 and installed it yesterday, seems to >> be >> working great. However... now I have an issue with the SMA connector >> coming >> loose one me after only a few times placing the Elecraft 2m/440 whip >> antenna on and off.* >> >> *I was pretty careful to make sure the SMA antenna connector was mounted >> securely. The instructions warned about overtightening. So I tightened it >> down as much as seemed right. With lock washer compressed, I would have >> thought it would be fine. Apparently not. * >> >> *So now I have to break the thing back down to get to the antenna mount >> and >> retighten. Anyone else have issues with this and how did you resolve? I >> almost wonder if some locktite would help?* >> >> *Thanks! Mike AB7RU* >> __ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:Elecraft@mailman.qth.net >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> Message delivered to ka2...@gmail.com >> > > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] [K2] KPA100 Temp Cal: Room temp or radio temp?
Hi John, I am waiting for my K2/100 kit to arrive and start my project as a Christmas present to myself. I operate a few times a year in Vietnam under conditions similar to those you describe. My main QTH is air conditioned, but I also plan to operate from beach locations and some other areas that are not. This past year I used a K2/10 and an RM Italy HLA 305V amp which has external cooling fans without a problem. But now I plan to upgrade my remote 'shack' with the K2/100, my questions are... Would removing the internal speaker and reversing the fan that comes with the K2/100 so it pulls air through the speaker grill and expels it out the back provide a similar solution to the one you proposed? Is it possible to do that? Did you consider mounting a 4" cooling fan on top of the K2/100 heat sink that would draw air across and away from the cooling fins? (The RM Italy amp uses 2 - 4" fans and I never had a heat or noise issue). Thanks and 73 BJ WA7WJR XV9WJR -- Sent from: http://elecraft.365791.n2.nabble.com/ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Fan noise on FT8?
Hi Joe, The mike is disconnected. Peter, AE1T On Friday, December 1, 2017, 10:16:43 PM EST, Joe Lynchwrote: Dear Peter, Maybe your mic is picking up the fan noise and transmitting it over the air. Try disconnecting your mic and see what happens. Sincerely, Joe Lynch, N6CL On Friday, December 1, 2017 3:44 PM, Peter Drexel via Elecraft wrote: It seems that, when the fan starts on my K3, a series of vertical lines appears on the WSJT Wide Graph. Every 60Hz would be kind of obvious. What's causing that? What can I do about it? (other than keeping the power low enough - 8 watts or less - to keep the fan from kicking in) 73 de Peter, AE1TK3 # 3701 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to n...@sbcglobal.net __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] AUX port gender on KPA1500 different than KPA500
Dan: The initial prototypes used for photos did have a male DE-15. That was changed in a subsequent prototype revision. The KPA1500 prototype here has a male DE-15 AUX connector, just like my KPA500. The K3/K3S to KPA1500 15-pin ACC cable is the same as the cable for KPA500. The KPAK3AUX cable set includes a Y cable expansion adapter and a TX keying line interrupter (see KPAK3AUX in the KPA1500 section of our product list), or the 15-pin cable can be ordered separately without the Y and TX key line interrupter, see the KAT500 section of our order page, P/N E850463. 73 de Dick, K6KR -Original Message- From: elecraft-boun...@mailman.qth.net [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Dan AE9K Sent: Saturday, December 2, 2017 20:26 To: elecraft@mailman.qth.net Subject: [Elecraft] AUX port gender on KPA1500 different than KPA500 The picture of back of the RF deck on the KPA1500 FAQ shows a female DE-15 for the AUX port. The KPA500 has a male DE-15 AUX port. Is the port in the picture correct or just a pre-production mock-up with the wrong gender? I ask because I'm inserting a switch box and am making the associated cables to be able to flip back and forth between the two amps (when the KPA1500 arrives). Dan AE9K -- Sent from: http://elecraft.365791.n2.nabble.com/ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to d...@elecraft.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] 160 meter contest also going on -- LOTS of activity
Wayne: Maybe just me, but I have yet to hear or see HI, again they elude me on 160CW -- *73 De Mike* *VE3YF _/http://www.ve3yf.com/_* __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3 PRE function question
My God - if we had a lake, it would be ~ 1/8 acre per property, if you were lucky - 3-5 people per property. I live in a medium sized town 30 miles from the centre of London, population ~ 250,000 in < 70 sq-mi :-( 73 de David, M0XDF (K3 #174, P3 #108) -- I really hate this damn machine, I wish that they would sell it. It never does just what I want, but only what I tell it! > On 3 Dec 2017, at 06:53, Edward R Colewrote: > > Doug, > > I checked 20m about 5pm and noted S3 noise but also that I had the PRE turned > on. With preamp off 20m noise is running S2. But both 40m and 80m see S6 > noise on my inverted-V hung on the tower under the triband yagi. This high > for usual on these bands for here (yes, PRE is off). > > I looked up your location which is in the mountains near Steamboat in > northern CO. 2000 pop/480 sq miles = 4 people per sq-mi which is way less > density from where I live. 4,200 in a 16x 10 mile strip along the western > shore of the Kenai Peninsula. Density = 4200/160 = 26 people per sq-mi. But > that is not accurate for my nearby density around a lake with average > property size of 2-3 acres and 2.5 persons per property. Probably 200-300 > within a mile. All have wireless devices and consumer electronics galore. > Many are line of sight across the lake. I do have buired utilities in the > near 1/4 mile but overhead wired beyond that. Internet is phone line DSL and > TV by satellite. > > Also we have a refinery, LNG plant, and local gas-trubine generation station > 2-miles to the west. 12 miles south is a city with 7500 people in typical > city density and many stores and businesses (lots of digital cash registers). > Another city of 7500 lies another 11 miles south to the first so in 30-mile > radius we have a pop of about 30,000. > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com