[Elecraft] SOLVED: Need help with K3 vs Win 10

[Don Putnick]

Sorry for the wasted email. Problem with Win 10 drivers.
Final score: NA6Z 1; Win10 0
73 Don NA6Z
K3 #5495

On Sun, Apr 25, 2021 at 4:19 PM Don Putnick  wrote:

> I'm having problems controlling my K3 with applications under Win 10.
> Truth in lending: Win 10 is on the Bootcamp partition of my MacBook Pro
> running Big Sur.
>
> The K3 Utility on the Mac side works just fine, so I know the cable is
> okay. I can send CW via the Utility's terminal window. I can't on the Win
> 10 side, but the connection is established. N1MM is a mixed bag. I can read
> and control the VCOs but I can't get the macros to send CW.
>
> I'd appreciate any suggestions anyone has to offer. Not urgent but
> frustrating. I have until Field Day.
> Don NA6Z
> K3 #5495
>
>
>
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] Elecraft CW Net Report

[kevinr]

Good Evening,

   Conditions were not good.  QSB was moderate while noise was weak.  
Forty meters was stronger than twenty with more QSB.  I thought the CME 
would cause more hiss but I did not hear it. Weather reports were all 
over the place.  Four sites with rain, two with snow, a few sunny.  
Temperatures from 35 to 82 degrees. I expect there is some wind with 
those differences.  Here it is foggy and wet but much more green than 
last week.  The leaves decided it was time.  The ferns have grown a foot 
in the last day.  They needed this rain.



  On 14050.5 kHz at 2200z:

W0CZ - Ken - ND

K6XK - Roy - IA


  On 7047.5 kHz at z:

W0CZ - Ken - ND

K0DTJ - Brian - CA

K6PJV - Dale - CA


   I walked through the house and counted five T-squares hanging on the 
walls.  There is another one, but it's for cutting drywall ;)  Three of 
them are inherited so I can use that in my defense. However, if you need 
to lay out a sign quickly, or cut glass for that matter, they are very 
handy.  Then there are those times when the power is out and I need to 
draw an isometric view of some idea which is bugging me.


   Until next week stay creative & 73,

  Kevin.  KD5ONS


-


The supreme accomplishment is to blur the line between work and play. 
-Arnold J. Toynbee





__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] K3 parts

[Mike K8CN]

Check here - options are half-deposit and full deposit.

https://elecraft.com/pages/k3-k3s-options

73,
Mike, K8CN



--
Sent from: http://elecraft.365791.n2.nabble.com/
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] K3 parts

[Jamie WW3S]

Are parts/boards still available for the K3? Like the I/O USB soundcard 
board?

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] Need help with K3 vs Win 10

[Don Putnick]

I'm having problems controlling my K3 with applications under Win 10. Truth
in lending: Win 10 is on the Bootcamp partition of my MacBook Pro running
Big Sur.

The K3 Utility on the Mac side works just fine, so I know the cable is
okay. I can send CW via the Utility's terminal window. I can't on the Win
10 side, but the connection is established. N1MM is a mixed bag. I can read
and control the VCOs but I can't get the macros to send CW.

I'd appreciate any suggestions anyone has to offer. Not urgent but
frustrating. I have until Field Day.
Don NA6Z
K3 #5495
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] T1 bypass mode and 2M/70CM

[Don - W6CZ]

I know that the T1 can’t be used to tune an antenna above 6 meters, but can
it be used in the bypass mode?



--
Sent from: http://elecraft.365791.n2.nabble.com/
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] Kenwood MC-43S mic for K2

[Aaron K5ATG]

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] OT: High school drafting class,

[Don Wilhelm]

Ted,

Does that mean that you were allowed to "color outside the lines"?
As an engineer, I always had to "stay between the lines" (my creativity 
had to be placed in other directions, not exceeding specs) but that is 
good advice for drivers too - as well as clean side up and dirty side down.


73,
Don W3FPR

On 4/25/2021 9:27 AM, eda...@aya.yale.edu wrote:

I never took a drafting class nor anything like it in high school, yet its
absence never hurt me professionally.  Making a straight line is not a skill
required of a lawyer.

Ted, KN1CBR



__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] OT: High school drafting class,

[Ted Edwards W3TB]

We called it Mechanical Drawing.
I am not in engineering field, but it is handy sometimes.

On Sun, Apr 25, 2021 at 16:21 MIKE ZANE  wrote:

> You bet there is! from retired LE,  Mike
> > On 04/25/2021 8:13 AM Hank via Elecraft 
> wrote:
> >
> >
> > There’s a joke there somewhere!!
> >
> > Hank
> > K4HYJ
> >
> > > On Apr 25, 2021, at 9:28 AM, eda...@aya.yale.edu wrote:
> > >
> > > I never took a drafting class nor anything like it in high school,
> yet its
> > > absence never hurt me professionally.  Making a straight line is not a
> skill
> > > required of a lawyer.
> > >
> > > Ted, KN1CBR
> > >
> > > __
> > > Elecraft mailing list
> > > Home: http://mailman.qth.net/mailman/listinfo/elecraft
> > > Help: http://mailman.qth.net/mmfaq.htm
> > > Post: mailto:Elecraft@mailman.qth.net
> > >
> > > This list hosted by: http://www.qsl.net
> > > Please help support this email list: http://www.qsl.net/donate.html
> > > Message delivered to h...@optilink.us
> >
> > __
> > Elecraft mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/elecraft
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:Elecraft@mailman.qth.net
> >
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
> > Message delivered to n...@comcast.net
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to w3tb@gmail.com

-- 
73 de Ted Edwards, W3TB and GØPWW

and thinking about operating CW:
"Do today what others won't,
so you can do tomorrow what others can't."
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] Drafting

[Wilson Lamb]

"I never took a drafting class nor anything like it in high school, yet its
absence never hurt me professionally. Making a straight line is not a skill
required of a lawyer." 
  
This cries out for several clever and potentially offensive responses, but it's 
a new day and I'm not going to post them. 
Besides, the poster may be a nice guy, making them unfair. 
Most everyone will know them anyway, so I'll just say  
73, 
WL 
    

-Original Message-

From: elecraft-request 
To: elecraft 
Date: Sunday, 25 April 2021 5:24 PM EDT
Subject: Elecraft Digest, Vol 204, Issue 17

Send Elecraft mailing list submissions to 
elecraft@mailman.qth.net 

To subscribe or unsubscribe via the World Wide Web, visit 
http://mailman.qth.net/mailman/listinfo/elecraft 
or, via email, send a message with subject or body 'help' to 
elecraft-requ...@mailman.qth.net 

You can reach the person managing the list at 
elecraft-ow...@mailman.qth.net 

When replying, please edit your Subject line so it is more specific 
than "Re: Contents of Elecraft digest..." 


Today's Topics: 

1. K2 For Sale (Robie Elms) 
2. Re: OT: High school drafting class, ~1975 (Dave Sublette) 
3. Need a tuning knob for K2 (Frank Krozel) 
4. XV432 (Ken Roberson) 
5. OT: High school drafting class, (eda...@aya.yale.edu) 
6. Speaker upgrade (Bob McGraw) 
7. Re: Need a tuning knob for K2 (Don Wilhelm) 
8. Re: Need a tuning knob for K2 (Frank Krozel) 
9. Re: Need a tuning knob for K2 (Don Wilhelm) 
10. Re: Need a tuning knob for K2 (Frank Krozel) 
11. Re: OT: High school drafting class, (Hank) 
12. Re: OT: High school drafting class, (Louandzip) 
13. Re: OT: High school drafting class, (Grant Youngman) 
14. Re: K3/KPA500 question (Bob Wilson, N6TV) 
15. MC-43S Mic for K2 (Aaron K5ATG) 
16. Re: MC-43S Mic for K2 (Julia Tuttle) 
17. FS - unbuilt KAF2 (Tom Ewing) 
18. Re: OT: High school drafting class, ~1975 (Chris R. NW6V) 
19. Re: OT: High school drafting class, (Jim Brown) 
20. Kenwood MC - 43S mic for K2 (Aaron K5ATG) 
21. Re: OT: High school drafting class, (Hal Massey) 
22. K3/KPA500 question (Andy Durbin) 
23. Re: K3/KPA500 question (Lou) 
24. Re: OT: High school drafting class, (MIKE ZANE) 


-- 

Message: 1 
Date: Sun, 25 Apr 2021 06:43:00 -0500 
From: Robie Elms  
To: Elecraft Mail List  
Subject: [Elecraft] K2 For Sale 
Message-ID: 
 
Content-Type: text/plain; charset="UTF-8" 

Here's the info on the K2 

I built it in 2007, Serial No 61XX. It is the 15 w version and includes 
the following: 


- KSB2 SSB Adapter 
 
- KNB2 High Performance Noise Blanker 
 
- K160M 160M and 2nd RX Port 
 
- KIO2 RS-232 Interface and Aux I/0 
 
- KAT2 Automatic Antenna Tuner 
 
- KBT2 Battery 
 

I have used it extensively for several years, but it is in good condition. 
The K2's battery is a SLA unit and my battery became exhausted several 
years ago so it is not included. A new battery can be purchased from 
Elecraft or other sources and installed. I don't recommend replacing it as 
a LiFePO is a much better choice today. 

The K2 is wired for an Icom microphone. 

I purchased a KX3 about 3 yrs ago and since then the K2 has not seen much 
use. 

I'm asking $850 for the package including all manuals, documentation & 
tools. 

Payment Via PayPal 

Please contact me @ rule...@gmail.com if interested. 

Robie - AJ4F 


-- 

Message: 2 
Date: Sun, 25 Apr 2021 08:45:49 -0400 
From: Dave Sublette  
To: Elecraft Discussion List  
Subject: Re: [Elecraft] OT: High school drafting class, ~1975 
Message-ID: 
 
Content-Type: text/plain; charset="UTF-8" 

To clarify, my Dad was not a ham. But he did teach me and the rest of the 
scouts the code. He was my first scoutmaster. When I joined the Navy at 
age 19, he got interested and got his novice ticket as a surprise. I was 
at K6NCG, going to ET'A' school on Treasure Island. He called me on the 
phone, which was a big deal long distance from Indiana to California in 
1962. We met on the 40M Novice band and I was his first QSO. He refused 
to work anyone else until he worked me. When he died in 1999, I found the 
QSL I had sent him from K6NCG, hanging on his bedroom wall. He never got 
his general. 

As I said before, memories are priceless. 

73, 

Dave, K4TO 

On Sat, Apr 24, 2021 at 8:29 AM Dave Sublette  wrote: 

> My relationship with drafting class goes back to before I was born. My 
> Dad, born in 1918, took drafting class in 1936. After he died, I found a 
> pen and ink drawing of his from that class. It was a schematic of two 
> different crystal sets. 

Re: [Elecraft] OT: High school drafting class,

[MIKE ZANE]

You bet there is! from retired LE,  Mike
> On 04/25/2021 8:13 AM Hank via Elecraft  wrote:
> 
>  
> There’s a joke there somewhere!!
> 
> Hank
> K4HYJ
> 
> > On Apr 25, 2021, at 9:28 AM, eda...@aya.yale.edu wrote:
> > 
> > I never took a drafting class nor anything like it in high school, yet its
> > absence never hurt me professionally.  Making a straight line is not a skill
> > required of a lawyer.
> > 
> > Ted, KN1CBR
> > 
> > __
> > Elecraft mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/elecraft
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:Elecraft@mailman.qth.net
> > 
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
> > Message delivered to h...@optilink.us
> 
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to n...@comcast.net
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] K3/KPA500 question

[Lou]

That also controls the KAT500 when connected.

73, Lou KE1F

On 4/25/2021 4:08 PM, Andy Durbin wrote:

"FYI, you can still tap the BAND buttons on the KPA500 to change bands on the K3, 
because that uses the AUXBUS line (ACC Pin 2), not the BAND DATA lines.  Many folks may 
have never discovered this cool feature of the KPA500 and KPA1500."

I had to write code to put the KPA500 back on the correct band if one of these 
band buttons was accidentally pressed.  I wish there was a way to disable them 
completely.  One person's cool feature is another's PITA.

Andy, k3wyc
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to lmecs...@cfl.rr.com

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] K3/KPA500 question

[Andy Durbin]

"FYI, you can still tap the BAND buttons on the KPA500 to change bands on the 
K3, because that uses the AUXBUS line (ACC Pin 2), not the BAND DATA lines.  
Many folks may have never discovered this cool feature of the KPA500 and 
KPA1500."

I had to write code to put the KPA500 back on the correct band if one of these 
band buttons was accidentally pressed.  I wish there was a way to disable them 
completely.  One person's cool feature is another's PITA.

Andy, k3wyc
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] OT: High school drafting class,

[Hal Massey]

This turned out to be a popular subject line. Here goes...

I was too busy with AP classes to take drafting in high school. But I had to 
take it when I went off to the College of Engineering to be an Electrical 
Engineer. And I am glad I did take it. Of course, now it is all CAD systems…

Regards
-Hal WB6NNR

> On Apr 25, 2021, at 9:13 AM, Hank via Elecraft  
> wrote:
> 
> There’s a joke there somewhere!!
> 
> Hank
> K4HYJ
> 
>> On Apr 25, 2021, at 9:28 AM, eda...@aya.yale.edu wrote:
>> 
>> I never took a drafting class nor anything like it in high school, yet its
>> absence never hurt me professionally.  Making a straight line is not a skill
>> required of a lawyer.
>> 
>> Ted, KN1CBR
>> 
>> __
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft@mailman.qth.net
>> 
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to h...@optilink.us
> 
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to haljr.mas...@gmail.com

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] Kenwood MC - 43S mic for K2

[Aaron K5ATG]

I have been using a Kenwood MC-43S microphone for my K2 and the PTT button
broke. Since the mic is still in really good condition I contacted Kenwood
about a replacement PTT button and they said that I have to replace the
entire microphone. So I was just asking the Elecraft community if anyone
has a broken MC-43S mic for parts?

Aaron K5ATG
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] OT: High school drafting class,

[Jim Brown]

On 4/25/2021 6:27 AM, eda...@aya.yale.edu wrote:

I never took a drafting class nor anything like it in high school, yet its
absence never hurt me professionally.  Making a straight line is not a skill
required of a lawyer.


But writing legibly is, and that was a VERY important contribution of my 
technical drawing classes. My script has become pretty flaky with age, 
but my printing is still pretty legible.


73, Jim K9YC
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] OT: High school drafting class, ~1975

[Chris R. NW6V]

>
> Wayne Burdick n6kr at elecraft.com
> 
>  wrote:"Here's to those moments, and to that timeless pursuit: turning
> abstractions into reality."


Indeed. There is nothing so sublime as the moment of clarity when the last
pieces of a jigsaw puzzle align, and the vision in your mind's eye
crystalizes into reality.

Thanks for sharing your visions with us :-)

73 Chris NW6V
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] FS - unbuilt KAF2

[Tom Ewing via Elecraft]

Bought it, didn’t need it. 

$110 shipped CONUS or trade for a new Fluke 107 with matching case. 

Tommy
W0XXX
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] MC-43S Mic for K2

[Julia Tuttle]

What about it?

On Sun, Apr 25, 2021, 14:25 Aaron K5ATG  wrote:

>
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to ju...@juliatuttle.net
>
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] MC-43S Mic for K2

[Aaron K5ATG]

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] K3/KPA500 question

[Bob Wilson, N6TV]

Does your automatic antenna switch use the Unified Microsystems BCD-10 or
BCD-14 band decoders, or is your design similar to the 4O3A Antenna Genius?

These products all use opto-Isolators on the four Band Data lines in the
AUX cable.  Wiring this type of decoder in parallel with the
K3/KAT500/KPA500 AUX cable via a 15-pin Y-cable or similar *will usually
cause automatic band changes on the KPA500 to stop working*, until you
disconnect the antenna switch's band decoder, or send some RF so that the
KPA500 frequency counter takes over.  Not cool.

Opto-isolators draw too much current from the K3 ACC pins, leaving too
little voltage for the KPA500's band decoder to track properly.  This is no
problem for the KPA1500, only the KPA500, with or without the KAT500.

The solution I discovered was to connect four 4.7K pull-up resistors to 12V
to each band data pin in the K3 ACC cable, assuming the band decoder in the
antenna switch can handle 12V instead of 5V (most can).  The KAT500 and
KPA500 will have no problem with 12V on the band data lines.

The Y-BOX v3.0 (not pictured on my website because I have not had time to
update it) includes these four pull-up resistors.  They can conveniently be
wired internally to the band data pins, and band switching should work
again when all the devices are connected in parallel to the K3 ACC via the
Y-BOX.  This assumes your KPA500 "RADIO" menu is set to "K3" or to "BCD" so
it tracks properly when the automatic antenna switch is disconnected from
the ACC/AUX cables.

FYI, you can still tap the BAND buttons on the KPA500 to change bands on
the K3, because that uses the AUXBUS line (ACC Pin 2), not the BAND DATA
lines.  Many folks may have never discovered this cool feature of the
KPA500 and KPA1500.

73,
Bob, N6TV
https://bit.ly/Y-BOX


On Fri, Apr 23, 2021 at 6:18 PM Joe K2UF  wrote:

> I have my K3-KAT500-KPA500 working great.  The amp is off to the left side
> and I can't see the display easily.  while working on building an auto
> antenna switch  I noticed  that the band display on the amp does not synch
> with the K3.  It seems to be random.  If I hit  one dit on the key  the amp
> will synch the band with the K3.  I am not sure if this has been working
> like this right along and just did not  notice.
>
> Any ideas guys.
>
> 73 Joe K2UF
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to n...@arrl.net
>
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] OT: High school drafting class,

[Grant Youngman]

I guess I missed out. Never had a formal course. No drafting in high school, 
and no drafting during undergraduate and graduate EE at Rice in the 60s. A 
straight edge and logic element templates in various sizes, were all the 
drafting skills needed. Board layout and a few other things were picked up as 
exercises for the the student. 

Grant NQ5T

Sent from my iPhone

> On Apr 25, 2021, at 11:34 AM, Louandzip via Elecraft 
>  wrote:
> 
>  Maybe had you known drafting, you wouldn't have had to resort to becoming a 
> lawyer.  HI HI
> 
> Lou W7HV
> 
> 
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] OT: High school drafting class,

[Louandzip via Elecraft]

 Maybe had you known drafting, you wouldn't have had to resort to becoming a 
lawyer.  HI HI

Lou W7HV

On Sunday, April 25, 2021, 7:28:59 AM MDT, eda...@aya.yale.edu 
 wrote:  
 
 I never took a drafting class nor anything like it in high school, yet its
absence never hurt me professionally.  Making a straight line is not a skill
required of a lawyer.

Ted, KN1CBR

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to louand...@yahoo.com 
  
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] OT: High school drafting class,

[Hank via Elecraft]

There’s a joke there somewhere!!

Hank
K4HYJ

> On Apr 25, 2021, at 9:28 AM, eda...@aya.yale.edu wrote:
> 
> I never took a drafting class nor anything like it in high school, yet its
> absence never hurt me professionally.  Making a straight line is not a skill
> required of a lawyer.
> 
> Ted, KN1CBR
> 
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to h...@optilink.us

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] Need a tuning knob for K2

[Frank Krozel]

As usual, Don you have the correct answers, thanks again.

Hope you are doing well!

-73-  FrankKG9H
kg9hfr...@gmail.com




> On Apr 25, 2021, at 9:53 AM, Don Wilhelm  wrote:
> 
> Frank,
> 
> Just take the top cover off and look between the upper 2D connectors and the 
> Front Panel board.
> 
> 73,
> Don W3FPR
> 
> 
> On 4/25/2021 10:34 AM, Frank Krozel wrote:
>> Thanks Don, will check today.
>> 
>> I also need to figure out which K2 need those small 3/8”x3/8” rubber spacers 
>> in-between the PC boards without taking the front panel off.
>> 
>> -73-  FrankKG9H
>> kg9hfr...@gmail.com 
>> 
>> 
>> 
>> 
> 

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] Need a tuning knob for K2

[Don Wilhelm]

Frank,

Just take the top cover off and look between the upper 2D connectors and 
the Front Panel board.


73,
Don W3FPR


On 4/25/2021 10:34 AM, Frank Krozel wrote:

Thanks Don, will check today.

I also need to figure out which K2 need those small 3/8”x3/8” rubber 
spacers in-between the PC boards without taking the front panel off.


-73-  Frank    KG9H
kg9hfr...@gmail.com 






__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] Need a tuning knob for K2

[Frank Krozel]

Thanks Don, will check today.

I also need to figure out which K2 need those small 3/8”x3/8” rubber spacers 
in-between the PC boards without taking the front panel off.

-73-  FrankKG9H
kg9hfr...@gmail.com




> On Apr 25, 2021, at 9:27 AM, Don Wilhelm  wrote:
> 
> Frank,
> 
> Do you have the new encoder?  I don't know which SN they were started.  That 
> is the key to which knob you need.  If the knob is off, lift the fiber 
> washers and check to see if there is a green tab in the hole to the right of 
> the encoder shaft.  If the hole is empty, you have the new encoder.
> Order the new knob from Elecraft - they no longer have the older knob.
> With the new knob, you need 3 fiber washers stacked.
> 
> 73,
> Don W3FPR
> 
> On 4/25/2021 9:00 AM, Frank Krozel wrote:
>> I am looking for a tuning knob for a K2 SN 5630
>> If I recall there were two different sizes of shafts, this would be the 
>> second (maybe current) size.
>> 
>> This is SN
>> -73-  FrankKG9H
>> kg9hfr...@gmail.com
>> 
>> 
>> 
>> 
>> __
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft@mailman.qth.net
>> 
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to d...@w3fpr.com
> 

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] Need a tuning knob for K2

[Don Wilhelm]

Frank,

Do you have the new encoder?  I don't know which SN they were started.  
That is the key to which knob you need.  If the knob is off, lift the 
fiber washers and check to see if there is a green tab in the hole to 
the right of the encoder shaft.  If the hole is empty, you have the new 
encoder.

Order the new knob from Elecraft - they no longer have the older knob.
With the new knob, you need 3 fiber washers stacked.

73,
Don W3FPR

On 4/25/2021 9:00 AM, Frank Krozel wrote:

I am looking for a tuning knob for a K2 SN 5630
If I recall there were two different sizes of shafts, this would be the second 
(maybe current) size.

This is SN
-73-  FrankKG9H
kg9hfr...@gmail.com




__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to d...@w3fpr.com


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] Speaker upgrade

[Bob McGraw]

I have my headset with mike plugged into the rear PHONES and MIC, the 
headphones plugged into the front PHONES jack, and my boom mike 
connected to the MIC connector.  Plus my external speakers plugged into 
the rear SPKRS jack.    The manual explains how to do this so all works 
as expected.    See page 22, 55, and 64 of the manual.


73

Bob, K4TAX



On 4/24/2021 8:50 AM, NJMike wrote:


Since I?m a new K3S owner and still learning the radio, can you also confirm
that those speakers can be hooked up while keeping the headphones plugged
into the rear jack?


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] OT: High school drafting class,

[edauer]

I never took a drafting class nor anything like it in high school, yet its
absence never hurt me professionally.  Making a straight line is not a skill
required of a lawyer.

Ted, KN1CBR

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] XV432

[Ken Roberson via Elecraft]

Hello all,

Is the XV432 stable enough for EME digi modes?

Thanks agn 73 Ken K5DNL

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] Need a tuning knob for K2

[Frank Krozel]

I am looking for a tuning knob for a K2 SN 5630
If I recall there were two different sizes of shafts, this would be the second 
(maybe current) size.

This is SN 
-73-  FrankKG9H
kg9hfr...@gmail.com




__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] OT: High school drafting class, ~1975

[Dave Sublette]

To clarify, my Dad was not a ham.  But he did teach me and the rest of the
scouts the code.  He was my first scoutmaster.  When I joined the Navy at
age 19, he got interested and got his novice ticket as a surprise.  I was
at K6NCG, going to ET'A' school on Treasure Island.  He called me on the
phone, which was a big deal long distance from Indiana to California in
1962.  We met on the 40M Novice band and I was his first QSO.  He refused
to work anyone else until he worked me.  When he died in 1999,  I found the
QSL I had sent him from K6NCG, hanging on his bedroom wall. He never got
his general.

As I said before, memories are priceless.

73,

Dave, K4TO

On Sat, Apr 24, 2021 at 8:29 AM Dave Sublette  wrote:

> My relationship with drafting class goes back to before I was born.   My
> Dad, born in 1918, took drafting class in 1936. After he died, I found a
> pen and ink drawing of his from that class. It was a schematic of two
> different crystal sets.  As a teen, Dad was the neighborhood radio
> technician. He strung wire antennas and repaired headphones for folks.
>
> I had that schematic framed and built one of the sets.  I entered it in
> the antiques section of the county fair(with a note that the radio was not
> the antique).  I won a Blue Ribbon and was considered for the grand
> champion ribbon.  I have the drawing and the set on my mantle.
>
> At almost 80 years of age, my memories are increasing in value.
>
> 73,
>
> Dave, K4TO
>
> On Sat, Apr 24, 2021, 4:00 AM Joe K2UF  wrote:
>
>> In 1955 we were the cool guys with a slide rule in a leather case hanging
>> from your belt and india ink stains on your hands.
>>
>> 73  Joe K2UF
>>
>> -Original Message-
>> From: elecraft-boun...@mailman.qth.net
>> [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Wayne Burdick
>> Sent: Saturday, April 24, 2021 1:09 AM
>> To: Elecraft Reflector
>> Subject: [Elecraft] OT: High school drafting class, ~1975
>>
>> OK, I've really dated myself now.
>>
>> Anyone remember "drafting"? A favorite class in high school: blueprints,
>> mechanical drawings, schematics, straight edges, hand lettering,
>> projections
>> and elevations. We invented things to draw that weren't real, but looked
>> like they should be. Did all the math by hand -- on a slide rule, if
>> necessary. Day-dreamed about what we might one day build.
>>
>> 45 years later, we're using tools we couldn't have imagined. Modeling
>> circuits and objects with millions of parameters and vectors, realizing
>> them
>> in virtual space, manipulating them in real time. Testing finished
>> products
>> before they're even assembled.
>>
>> The transformation is mind boggling. Yet the best part now, as it was
>> then,
>> is the occasional burst of creative energy that propels an idea forward.
>> The
>> feeling of pieces falling into place. Or forcing them into place out of
>> sheer necessity.
>>
>> Most of the time, we think of our new tools and techniques as advances in
>> the state of the art. Things we can't live without. But those same
>> defining
>> moments happened just as often in simpler times.
>>
>> Case in point -- my first real project, a rendition of W7ZOI's
>> Micro-mountaineer. Carefully documenting it took several sheets of
>> 4-squares-per-inch grid paper, which may still be in my cellar, beneath a
>> lifetime of such drawings. With the schematic, I took a lot of pride in
>> making the circuits look well-organized, as if that would somehow improve
>> my
>> odds. On the PC board, I drew large traces and pads with the etch-resist
>> pen, as if that would somehow appease the electrons.
>>
>> I etched the PCB, soldered two dozen parts, and connected a 12 V lantern
>> battery. Thanks to my paranoia about what would happen if I did it wrong,
>> I'd taken my time and done it right.
>>
>> I was rewarded with a hiss of band noise and a few CW signals on 40
>> meters.
>>
>> Here's to those moments, and to that timeless pursuit: turning
>> abstractions
>> into reality.
>>
>> 73,
>> Wayne
>> N6KR
>>
>> __
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft@mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message
>> delivered to j...@k2uf.com
>>
>> __
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft@mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to k...@arrl.net
>>
>
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: 

[Elecraft] K2 For Sale

[Robie Elms]

Here's the info on the K2

I built it in 2007, Serial No 61XX.  It is the 15 w version and includes
the following:


   - KSB2 SSB Adapter
   
   - KNB2 High Performance Noise Blanker
   
   - K160M 160M and 2nd RX Port
   
   - KIO2 RS-232 Interface and Aux I/0
   
   - KAT2 Automatic Antenna Tuner
   
   - KBT2 Battery
   

I have used it extensively for several years, but it is in good condition.
The K2's battery is a SLA unit and my battery became exhausted several
years ago so it is not included.  A new battery can be purchased from
Elecraft or other sources and installed.  I don't recommend replacing it as
a LiFePO is a much better choice today.

The K2 is wired for an Icom microphone.

I purchased a KX3 about 3 yrs ago and since then the K2 has not seen much
use.

I'm asking $850 for the package including all manuals, documentation &
tools.

Payment Via PayPal

Please contact me @ rule...@gmail.com if interested.

Robie - AJ4F
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] OT: High school drafting class

[David Wilcox via Elecraft]

Why is it that these memories start coming back as we age? My two other high 
school nerd buddies correspond with email and each time they bring back very 
clear memories of our radio exploits. I just found my QSL card from my teens 
and also the stamped certificate from my Advanced License test I took in 1983 
at Dayton.  Too bad we had to send back our original license back then. One 
friend sent back a photo copy (not cheap back then) of each license when he 
upgraded and so still has all his original certificates.  What treasure.

Dave K8WPE

David J. Wilcox’s iPad

> On Apr 24, 2021, at 8:32 AM, Dave Sublette  wrote:
> 
> My relationship with drafting class goes back to before I was born.   My
> Dad, born in 1918, took drafting class in 1936. After he died, I found a
> pen and ink drawing of his from that class. It was a schematic of two
> different crystal sets.  As a teen, Dad was the neighborhood radio
> technician. He strung wire antennas and repaired headphones for folks.
> 
> I had that schematic framed and built one of the sets.  I entered it in the
> antiques section of the county fair(with a note that the radio was not the
> antique).  I won a Blue Ribbon and was considered for the grand champion
> ribbon.  I have the drawing and the set on my mantle.
> 
> At almost 80 years of age, my memories are increasing in value.
> 
> 73,
> 
> Dave, K4TO
> 
>> On Sat, Apr 24, 2021, 4:00 AM Joe K2UF  wrote:
>> 
>> In 1955 we were the cool guys with a slide rule in a leather case hanging
>> from your belt and india ink stains on your hands.
>> 
>> 73  Joe K2UF
>> 
>> -Original Message-
>> From: elecraft-boun...@mailman.qth.net
>> [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Wayne Burdick
>> Sent: Saturday, April 24, 2021 1:09 AM
>> To: Elecraft Reflector
>> Subject: [Elecraft] OT: High school drafting class, ~1975
>> 
>> OK, I've really dated myself now.
>> 
>> Anyone remember "drafting"? A favorite class in high school: blueprints,
>> mechanical drawings, schematics, straight edges, hand lettering,
>> projections
>> and elevations. We invented things to draw that weren't real, but looked
>> like they should be. Did all the math by hand -- on a slide rule, if
>> necessary. Day-dreamed about what we might one day build.
>> 
>> 45 years later, we're using tools we couldn't have imagined. Modeling
>> circuits and objects with millions of parameters and vectors, realizing
>> them
>> in virtual space, manipulating them in real time. Testing finished products
>> before they're even assembled.
>> 
>> The transformation is mind boggling. Yet the best part now, as it was then,
>> is the occasional burst of creative energy that propels an idea forward.
>> The
>> feeling of pieces falling into place. Or forcing them into place out of
>> sheer necessity.
>> 
>> Most of the time, we think of our new tools and techniques as advances in
>> the state of the art. Things we can't live without. But those same defining
>> moments happened just as often in simpler times.
>> 
>> Case in point -- my first real project, a rendition of W7ZOI's
>> Micro-mountaineer. Carefully documenting it took several sheets of
>> 4-squares-per-inch grid paper, which may still be in my cellar, beneath a
>> lifetime of such drawings. With the schematic, I took a lot of pride in
>> making the circuits look well-organized, as if that would somehow improve
>> my
>> odds. On the PC board, I drew large traces and pads with the etch-resist
>> pen, as if that would somehow appease the electrons.
>> 
>> I etched the PCB, soldered two dozen parts, and connected a 12 V lantern
>> battery. Thanks to my paranoia about what would happen if I did it wrong,
>> I'd taken my time and done it right.
>> 
>> I was rewarded with a hiss of band noise and a few CW signals on 40 meters.
>> 
>> Here's to those moments, and to that timeless pursuit: turning abstractions
>> into reality.
>> 
>> 73,
>> Wayne
>> N6KR
>> 
>> __
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft@mailman.qth.net
>> 
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message
>> delivered to j...@k2uf.com
>> 
>> __
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft@mailman.qth.net
>> 
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to k...@arrl.net
>> 
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: