Re: [Elecraft] K3s USB sound card not receiving MMTTY audio
Does the tone in MMTTY match the tone set in the K3? Wes N7WS On 1/8/2022 7:31 PM, Mike Dodd wrote: I have had the built-in SUB sound card in my K3s working with MMTTY in AFSK A mode in the past, but now it does not produce TX tones when MMTTY transmits. MMTTY is set up to use the USB Audio Codec in RX and TX, and can decode RTTY signals. When I click the TX button, the K3s goes into transmit, but produces no output (ALC is zero). If I set MMTTY's Transmission sound card to the PC's built-in speakers, I hear the tones when transmitting, so MMTTY is producing them. It just doesn't send those tones to the K3s USB sound card. What am I missing? Again, this has worked many times in the November 2021 WAE RTTY contest. Thanks. --- Mike N4CF __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] Elecraft CW Net Announcement
Good Evening, The last two weeks here have been dominated by snow of many different types. The Inuit languages have over twenty words for snow. I think that is rather sparse. English uses modifiers independent of the root word snow. It requires a phrase for what can be stated with a single word in Inuit. I dug a little deeper and found a culture very familiar with living in and around snow. The Sami people of Lapland have approximately 200 words to describe snow and ice. That may be a little excessive :) The sun was weaker early in the week. Now it has a large sunspot group growing on the near side, with more active groups on the far side. Flux had dropped to near 80, currently it is over 100 again. Bright aurora forecast noise and QSB. It may be interesting. Stronger signals with louder noise. But you never know what will happen until you call CQ. Please join us on (or near): 14050 kHz at 2300z Sunday (3 PM PST Sunday) 7047 kHz at 0030z Monday (4:30 PM PST Sunday) 73, Kevin. KD5ONS - My time in academia has taught me if you torture data long enough it will confess to anything. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] K3s USB sound card not receiving MMTTY audio
I have had the built-in SUB sound card in my K3s working with MMTTY in AFSK A mode in the past, but now it does not produce TX tones when MMTTY transmits. MMTTY is set up to use the USB Audio Codec in RX and TX, and can decode RTTY signals. When I click the TX button, the K3s goes into transmit, but produces no output (ALC is zero). If I set MMTTY's Transmission sound card to the PC's built-in speakers, I hear the tones when transmitting, so MMTTY is producing them. It just doesn't send those tones to the K3s USB sound card. What am I missing? Again, this has worked many times in the November 2021 WAE RTTY contest. Thanks. --- Mike N4CF __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] SSB Net 1-2-2022
Here is the list of stations checking in to the 1st 2022 Sunday 20M. SSB Net. Thank you to the relay stations for their help in picking up stations. We have the following nets on Sundays: 20 M. Net 1800Z 14.303.5 or 14.310 if 14.303.5 is occupied40 M Net 1900Z 7.280Zoom meeting at 2000Z contact Carl K8NU (email is on QRZ) for the link80 M. Net 0200Z 3.775 or there abouts | Call | Name | State | Radio | Serial # | QRP | Notes | | | | | | | | | | WB9JNZ | Eric | IL | K3 | 4017 | | Net Control | | N6JW | John | CA | K3 | 936 | | Relay Station | | WM6P | Steve | GA | K4D | 436 | | Relay Station | | N2TNQ | Len | NJ | K3 | 5270 | | | | K8NU | Carl | OH | Yaesu FT | DX 101D | | | | AE6JV | Bill | NH | K3 | 6299 | | Relay Station | | NC0JW | Jim | CO | KX3 | 1356 | | | | W7QHD | Kurt | AZ | K2/100 | 1538 | | | | W3SA | John | NC | Kenwood | TS 890 | | | | AB7CE | Roy | MT | K2/100 | 40 | | | | NS7P | Phil | OR | K3 | 1826 | | Relay Station | | K1NW | Brian | RI | K3 | 4974 | | Relay Station | | K3CAQ | Andy | ME | KX3 | 10876 | | | | K7BRR | Bill | AZ | K3 | 2693 | | | | N7YW | Ken | AZ | K3 | 8183 | | | | K6FW | Frank | CA | K3S | 11672 | | | | KO5V | Jim | NM | K2/100 | 7225 | | | | N8SBE | Dave | MI | K3S | 11361 | | | | ZL1PWD | Peter | NZ | K3 | 139 | | | | W4DML | Doug | TN | K3 | 6433 | | | | KB9AVO/KP4 | Paul | PR | K3S | | | | | W9EJB | Ed | IN | K3 | 1593 | | | | K6WDE | David | AZ | KX3 | 4599 | | | | W4TMW | Tom | GA | K4 | 361 | | | | K5PD | Pete | TX | K3 | 545 | | | | KJ7TBR | John | UT | Kenwood | TS 520 | | | | N6PGQ | Bob | CA | K3 | 5891 | | | | K6VWE | Stan | MI | K4D | 193 | | | | K7JG | John | WA | KX3 | 3519 | | | __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] P3 VGA Video Capture Card
Ed: > On Jan 8, 2022, at 10:21 AM, Ed G wrote: > > Hello, > I am investigating ways to be able to see P3 video when linking to a > local computer via a remote desktop type of program. The local computer > would be controlling a K3 using Win4K3 and I would like to also be able to > see the P3 video. So I am considering a VGA capture card to allow the P3 > video to be displayed on the local monitor. One card I looked at: > > https://www.amazon.com/Capture-Streaming-Teaching-Conference-Broadcasting/dp/B08GYXZC3D > > Is anyone on the list doing something similar? Looking for comments and/or > suggestions; thanks! Please keep in mind that VGA is defined as 640 x 480 pixels whereas the P3 with the Display Option provides Super VGA which provides a resolution of 1024 x 760 pixels. The P3 SVGA Display Option can also handle 1280 x 1024, 1440 x 900, and 1920 x 1080 pixels. The device you’re looking at says “VGA” so I presume this means it cannot handle SVGA. Another option would be to use an SDR ‘dongle’ with SDR software running as a panadapter. I have the RF output from the P3 going to a SDRPlay device running SDRuno on the PC in the shack and remotely connect to the PC to view that panadapter running off the K3/P3 receive RF. SDRuno uses Omnirig that allows the SDR to ‘follow’ the K3 frequency so as the K3 changes frequency the panadapter provided by the SDRuno software displays the frequency of the K3. I can also adjust the K3 frequency by changing the frequency on SDRuno. FWIW, Barry Baines, WD4ASW/5 Keller, TX > > --Ed, N3CW— > > > Sent from Mail for Windows > > > > > -- > This email has been checked for viruses by Avast antivirus software. > https://www.avast.com/antivirus > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to bbai...@mac.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] P3 VGA Video Capture Card
I have been using a StarTech.com USB3HDCAP USB 3.0 Video Capture Device with the WIN4K3 panadapter display since 2016. Works great except when a Windows update messes with it and I have to reinit the proper driver. zeke (AL) ab8ou On Sat, Jan 8, 2022 at 11:22 AM Ed G wrote: > Hello, > I am investigating ways to be able to see P3 video when linking to a > local computer via a remote desktop type of program. The local computer > would be controlling a K3 using Win4K3 and I would like to also be able to > see the P3 video. So I am considering a VGA capture card to allow the P3 > video to be displayed on the local monitor. One card I looked at: > > > https://www.amazon.com/Capture-Streaming-Teaching-Conference-Broadcasting/dp/B08GYXZC3D > > Is anyone on the list doing something similar? Looking for comments > and/or suggestions; thanks! > > --Ed, N3CW— > > > Sent from Mail for Windows > > > > > -- > This email has been checked for viruses by Avast antivirus software. > https://www.avast.com/antivirus > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to ajzadir...@gmail.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] P3 VGA Video Capture Card
Hello, I am investigating ways to be able to see P3 video when linking to a local computer via a remote desktop type of program. The local computer would be controlling a K3 using Win4K3 and I would like to also be able to see the P3 video. So I am considering a VGA capture card to allow the P3 video to be displayed on the local monitor. One card I looked at: https://www.amazon.com/Capture-Streaming-Teaching-Conference-Broadcasting/dp/B08GYXZC3D Is anyone on the list doing something similar? Looking for comments and/or suggestions; thanks! --Ed, N3CW— Sent from Mail for Windows -- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
