[Elecraft] Elecraft P3 For Sale

[Glenn Petri]

For Sale: Elecraft P3 with no add-ons, serial #2615. Excellent condition w/
screen & screen cover excellent as well. I am the 2nd owner, but now excess
to my needs after K4D purchase.
Included:
- CBLP3Y KIO3B RJ45 cable for the connection to the upgraded K3 & K3s
models (those with a USB port).
- short DB9/RS232 cable for a K3 w/o upgrade (no USB port)
- Elecraft power cord/connection
- necessary jumpers for connecting to a K3
- I will email the pdf P3 Manual to the buyer
As 2nd owner, I do not have original box/carton.
Shipping to USA only.
I prefer to ship via USPS Priority Mail & will provide tracking info.
Payment accepted - PayPal, USPS Money Order
$575 shipped (USA only) ($550 if local w/no shipping)
Additional pics on request.
Respond to qrz.com email address please.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] Elecraft gear in CA QSO Party 2023

[Jim Brown]

On 6/19/2024 9:38 AM, Dean Wood wrote:

It's fun to see where Elecraft gear is used.


Since about 2010, our team, usually signing W6BX, sometimes KU6W, has 
always been an all Elecraft team, with two or three stations, each K3, 
P3/SVGA, KPA500, KAT500.


73, Jim K9YC
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] KPA1500 firmware 3.03 beta on Elecraft web site

[Jorge Diez - CX6VM]

hi

couldn´t find last release notes

just this
https://elecraft.com/pages/kpa1500-1500-watt-linear-amplifier-firmware-and-utility

73,
Jorge

El mié, 19 jun 2024 a las 18:55, Dick Dievendorff ()
escribió:

> Navigate thru support, firmware & software, amp firmware, KPA1500
>
> Release notes are on that page, near the bottom.
>
> 73 de Dick, K6KR
>
> > On Jun 19, 2024, at 09:40, Dean Wood  wrote:
> >
> > Hi Elecraft list,
> >
> > It's fun to see where Elecraft gear is used.
> >
> > The California QSO Party (CQP) just went live with 15 videos from CQP
> 2023.
> >
> > Elecraft gear is shown in many of these videos!
> >
> > Check them out at:
> > https://cqp.org/av.html
> >
> > Elecraft K4, K3, P3, KX3, PX3, KXPA100, KPA1500, KPA500, KAT500 seen in
> CQP
> > 2023 Expedition and Mobile video at:
> >
> https://www.youtube.com/watch?v=hJsuPUzIWZ4=PLsXDoeEgG7J24xjIDAbboJ9NGv7dy0R3a=1
> >
> > Elecraft K4:
> > W6P and W6ML CQP 2023 videos
> >
> https://www.youtube.com/watch?v=jL4D348obZw=PLsXDoeEgG7J24xjIDAbboJ9NGv7dy0R3a=5
> >
> https://www.youtube.com/watch?v=uI0c1fAmbqU=PLsXDoeEgG7J24xjIDAbboJ9NGv7dy0R3a=12
> >
> > Elecraft K3, KPA500, KAT500 and K-POD:
> > K6T, W6E, W6COW and N6DE CQP 2023 videos
> >
> https://www.youtube.com/watch?v=vWq1whvPYEw=PLsXDoeEgG7J24xjIDAbboJ9NGv7dy0R3a=2
> >
> https://www.youtube.com/watch?v=GW5qkro0Y5U=PLsXDoeEgG7J24xjIDAbboJ9NGv7dy0R3a=4=iAQB
> >
> https://www.youtube.com/watch?v=xCMbBFDaFfI=PLsXDoeEgG7J24xjIDAbboJ9NGv7dy0R3a=8
> >
> https://www.youtube.com/watch?v=K-k8h2oueaI=PLsXDoeEgG7J24xjIDAbboJ9NGv7dy0R3a=14
> >
> >
> > 73...
> > -Dean - N6DE
> > CQP Chairman
> > __
> > Elecraft mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/elecraft
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:Elecraft@mailman.qth.net
> >
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
> > Message delivered to d...@elecraft.com
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to cx6vm.jo...@gmail.com



-- 
73,
Jorge
CX6VM/CW5W
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] KPA1500 firmware 3.03 beta on Elecraft web site

[Dick Dievendorff]

Navigate thru support, firmware & software, amp firmware, KPA1500

Release notes are on that page, near the bottom. 

73 de Dick, K6KR

> On Jun 19, 2024, at 09:40, Dean Wood  wrote:
> 
> Hi Elecraft list,
> 
> It's fun to see where Elecraft gear is used.
> 
> The California QSO Party (CQP) just went live with 15 videos from CQP 2023.
> 
> Elecraft gear is shown in many of these videos!
> 
> Check them out at:
> https://cqp.org/av.html
> 
> Elecraft K4, K3, P3, KX3, PX3, KXPA100, KPA1500, KPA500, KAT500 seen in CQP
> 2023 Expedition and Mobile video at:
> https://www.youtube.com/watch?v=hJsuPUzIWZ4=PLsXDoeEgG7J24xjIDAbboJ9NGv7dy0R3a=1
> 
> Elecraft K4:
> W6P and W6ML CQP 2023 videos
> https://www.youtube.com/watch?v=jL4D348obZw=PLsXDoeEgG7J24xjIDAbboJ9NGv7dy0R3a=5
> https://www.youtube.com/watch?v=uI0c1fAmbqU=PLsXDoeEgG7J24xjIDAbboJ9NGv7dy0R3a=12
> 
> Elecraft K3, KPA500, KAT500 and K-POD:
> K6T, W6E, W6COW and N6DE CQP 2023 videos
> https://www.youtube.com/watch?v=vWq1whvPYEw=PLsXDoeEgG7J24xjIDAbboJ9NGv7dy0R3a=2
> https://www.youtube.com/watch?v=GW5qkro0Y5U=PLsXDoeEgG7J24xjIDAbboJ9NGv7dy0R3a=4=iAQB
> https://www.youtube.com/watch?v=xCMbBFDaFfI=PLsXDoeEgG7J24xjIDAbboJ9NGv7dy0R3a=8
> https://www.youtube.com/watch?v=K-k8h2oueaI=PLsXDoeEgG7J24xjIDAbboJ9NGv7dy0R3a=14
> 
> 
> 73...
> -Dean - N6DE
> CQP Chairman
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to d...@elecraft.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] Elecraft gear in CA QSO Party 2023

[Dean Wood]

Hi Elecraft list,

It's fun to see where Elecraft gear is used.

The California QSO Party (CQP) just went live with 15 videos from CQP 2023.

Elecraft gear is shown in many of these videos!

Check them out at:
https://cqp.org/av.html

Elecraft K4, K3, P3, KX3, PX3, KXPA100, KPA1500, KPA500, KAT500 seen in CQP
2023 Expedition and Mobile video at:
https://www.youtube.com/watch?v=hJsuPUzIWZ4=PLsXDoeEgG7J24xjIDAbboJ9NGv7dy0R3a=1

Elecraft K4:
W6P and W6ML CQP 2023 videos
https://www.youtube.com/watch?v=jL4D348obZw=PLsXDoeEgG7J24xjIDAbboJ9NGv7dy0R3a=5
https://www.youtube.com/watch?v=uI0c1fAmbqU=PLsXDoeEgG7J24xjIDAbboJ9NGv7dy0R3a=12

Elecraft K3, KPA500, KAT500 and K-POD:
K6T, W6E, W6COW and N6DE CQP 2023 videos
https://www.youtube.com/watch?v=vWq1whvPYEw=PLsXDoeEgG7J24xjIDAbboJ9NGv7dy0R3a=2
https://www.youtube.com/watch?v=GW5qkro0Y5U=PLsXDoeEgG7J24xjIDAbboJ9NGv7dy0R3a=4=iAQB
https://www.youtube.com/watch?v=xCMbBFDaFfI=PLsXDoeEgG7J24xjIDAbboJ9NGv7dy0R3a=8
https://www.youtube.com/watch?v=K-k8h2oueaI=PLsXDoeEgG7J24xjIDAbboJ9NGv7dy0R3a=14


73...
-Dean - N6DE
CQP Chairman
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] KX3 Spur/Birdie on CW Receive

[James Bennett via Elecraft]

OK - mystery solved! I had posted this on the Elecraft reflector and shortly 
thereafter realized it should have gone on the KX groups.io  
list. So, I put it there and THAT is where my answer came from. Now, why it 
took almost a week to get into the Elecraft reflector is another question. But 
anyway, my problem was fixed AND now I know why I’m seeing double! Sorry for 
all the confusion, folks.

BTW - the “birdie” thingy was resolved by the Tech Mode entry RX ISO - turning 
it ON got rid of the “birdie”. Thanks to JPE1HZG for clueing me in to that one.

> On Jun 19, 2024, at 10:00 AM, James Bennett  wrote:
> 
> Wow - this is strange! I posted this last week and got an answer fairly 
> quickly - it was a setting in the tech mode menu that resolved it. Thought it 
> was all done. Then this morning around 08:30 local time I got a couple 
> messages that my post had been accepted from the reflector, and it all 
> started over again!
> 
> Anyway, the “problem” is resolved on my end and now it looks like something 
> funky is going on with the reflector.
> 
> Jim / K7TXA
> 
> 
>> On Jun 19, 2024, at 9:39 AM, Greg  wrote:
>> 
>> Calibration process is in the KXFL3 installation manual.  Let me know if you 
>> need the XG3.
>> 
>> 73
>> Greg
>> 
>> On Wed, Jun 19, 2024 at 9:34 AM Greg > > wrote:
>>> Hi Jim!
>>> 
>>> Do a search in the KX3 manual for IMAGE.  Two things to try.  One is a 
>>> setting in the 160bcb menu.  More likely it is the RX image rejection.  I 
>>> have not looked at the instructions to do it but you will need a 160-6 
>>> signal source.  If you don't have one you can use my XG3.  The instructions 
>>> should be on the elecraft website.
>>> 
>>> 73
>>> Greg
>>> 
>>> 
>>> On Wed, Jun 19, 2024, 8:58 AM James Bennett via Elecraft 
>>> mailto:elecraft@mailman.qth.net>> wrote:
 Folks - 
 
 I’ve got my KX3 connected via an MFJ 178B-SDR switch to my computer 
 running SDR++. This gives me a nice BIG pan adapter display on my monitor. 
 Additional software syncs the KX3 with SDR++ and RumLogNG - a logging 
 program. Anyway, When I have the KX3 in CW mode, I see a birdie or spur 
 (not sure the actual name for it) about 500 Hz up from my zero-beat 
 frequency. As I turn the KX3 dial, the spur mores right along with me. It 
 is showing with a signal strength of about -79 db. Now I know that is a 
 really low signal, but it does show up on the display and is a tad 
 annoying. Actually, as I type this I’m on 10.116 and as I was testing, I 
 find that there was a low level signal there, under the birdie. The fact 
 it was being covered up bugs me a bit, too.
 
 No matter what band I go to, my little “buddy” is there with me. If I 
 switch to USB or LSB, it is gone - it only shows up in CW. And if I do 
 CW-R, it switches to about 500 Hz below my frequency.
 
 Anyone else have this? Is it something worth reporting to Elecraft, or is 
 it a known “thing”.
 
 72, Jim / K7TXA
 __
 Elecraft mailing list
 Home: http://mailman.qth.net/mailman/listinfo/elecraft
 Help: http://mailman.qth.net/mmfaq.htm
 Post: mailto:Elecraft@mailman.qth.net 
 
 This list hosted by: http://www.qsl.net 
 Please help support this email list: http://www.qsl.net/donate.html
 Message delivered to greg.a...@gmail.com 

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] KX3 Spur/Birdie on CW Receive

[James Bennett via Elecraft]

Wow - this is strange! I posted this last week and got an answer fairly quickly 
- it was a setting in the tech mode menu that resolved it. Thought it was all 
done. Then this morning around 08:30 local time I got a couple messages that my 
post had been accepted from the reflector, and it all started over again!

Anyway, the “problem” is resolved on my end and now it looks like something 
funky is going on with the reflector.

Jim / K7TXA


> On Jun 19, 2024, at 9:39 AM, Greg  wrote:
> 
> Calibration process is in the KXFL3 installation manual.  Let me know if you 
> need the XG3.
> 
> 73
> Greg
> 
> On Wed, Jun 19, 2024 at 9:34 AM Greg  > wrote:
>> Hi Jim!
>> 
>> Do a search in the KX3 manual for IMAGE.  Two things to try.  One is a 
>> setting in the 160bcb menu.  More likely it is the RX image rejection.  I 
>> have not looked at the instructions to do it but you will need a 160-6 
>> signal source.  If you don't have one you can use my XG3.  The instructions 
>> should be on the elecraft website.
>> 
>> 73
>> Greg
>> 
>> 
>> On Wed, Jun 19, 2024, 8:58 AM James Bennett via Elecraft 
>> mailto:elecraft@mailman.qth.net>> wrote:
>>> Folks - 
>>> 
>>> I’ve got my KX3 connected via an MFJ 178B-SDR switch to my computer running 
>>> SDR++. This gives me a nice BIG pan adapter display on my monitor. 
>>> Additional software syncs the KX3 with SDR++ and RumLogNG - a logging 
>>> program. Anyway, When I have the KX3 in CW mode, I see a birdie or spur 
>>> (not sure the actual name for it) about 500 Hz up from my zero-beat 
>>> frequency. As I turn the KX3 dial, the spur mores right along with me. It 
>>> is showing with a signal strength of about -79 db. Now I know that is a 
>>> really low signal, but it does show up on the display and is a tad 
>>> annoying. Actually, as I type this I’m on 10.116 and as I was testing, I 
>>> find that there was a low level signal there, under the birdie. The fact it 
>>> was being covered up bugs me a bit, too.
>>> 
>>> No matter what band I go to, my little “buddy” is there with me. If I 
>>> switch to USB or LSB, it is gone - it only shows up in CW. And if I do 
>>> CW-R, it switches to about 500 Hz below my frequency.
>>> 
>>> Anyone else have this? Is it something worth reporting to Elecraft, or is 
>>> it a known “thing”.
>>> 
>>> 72, Jim / K7TXA
>>> __
>>> Elecraft mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>>> Help: http://mailman.qth.net/mmfaq.htm
>>> Post: mailto:Elecraft@mailman.qth.net 
>>> 
>>> This list hosted by: http://www.qsl.net 
>>> Please help support this email list: http://www.qsl.net/donate.html
>>> Message delivered to greg.a...@gmail.com 
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] KX3 Spur/Birdie on CW Receive

[James Bennett via Elecraft]

That should have been MFJ 1708B-SDR.

> On Jun 14, 2024, at 6:50 PM, James Bennett  wrote:
> 
> Folks - 
> 
> I’ve got my KX3 connected via an MFJ 178B-SDR switch to my computer running 
> SDR++. This gives me a nice BIG pan adapter display on my monitor. Additional 
> software syncs the KX3 with SDR++ and RumLogNG - a logging program. Anyway, 
> When I have the KX3 in CW mode, I see a birdie or spur (not sure the actual 
> name for it) about 500 Hz up from my zero-beat frequency. As I turn the KX3 
> dial, the spur mores right along with me. It is showing with a signal 
> strength of about -79 db. Now I know that is a really low signal, but it does 
> show up on the display and is a tad annoying. Actually, as I type this I’m on 
> 10.116 and as I was testing, I find that there was a low level signal there, 
> under the birdie. The fact it was being covered up bugs me a bit, too.
> 
> No matter what band I go to, my little “buddy” is there with me. If I switch 
> to USB or LSB, it is gone - it only shows up in CW. And if I do CW-R, it 
> switches to about 500 Hz below my frequency.
> 
> Anyone else have this? Is it something worth reporting to Elecraft, or is it 
> a known “thing”.
> 
> 72, Jim / K7TXA

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] KX3 Spur/Birdie on CW Receive

[James Bennett via Elecraft]

Folks - 

I’ve got my KX3 connected via an MFJ 178B-SDR switch to my computer running 
SDR++. This gives me a nice BIG pan adapter display on my monitor. Additional 
software syncs the KX3 with SDR++ and RumLogNG - a logging program. Anyway, 
When I have the KX3 in CW mode, I see a birdie or spur (not sure the actual 
name for it) about 500 Hz up from my zero-beat frequency. As I turn the KX3 
dial, the spur mores right along with me. It is showing with a signal strength 
of about -79 db. Now I know that is a really low signal, but it does show up on 
the display and is a tad annoying. Actually, as I type this I’m on 10.116 and 
as I was testing, I find that there was a low level signal there, under the 
birdie. The fact it was being covered up bugs me a bit, too.

No matter what band I go to, my little “buddy” is there with me. If I switch to 
USB or LSB, it is gone - it only shows up in CW. And if I do CW-R, it switches 
to about 500 Hz below my frequency.

Anyone else have this? Is it something worth reporting to Elecraft, or is it a 
known “thing”.

72, Jim / K7TXA
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com