[Elecraft] K3 Hanging on mode switch

[Donald Wines]

My trusty old K3, SN 123 in operation almost daily since late 2007, and has
performed almost flawlessly since. It has been updated regularly with most
options and could be considered “almost K3S”. It has been back to the
mothership once about 10 years ago for a quick fix due to  lightning ESD.

Recently though when changing modes from CW to USB/LSB or from DATA to AM
it hangs in transmit. A quick press of the “XMIT” button clears the problem
and it operates normally after. It doesn’t hang on any other mode switches
but if I change bands from a band on CW to a band on USB/LSB it will hang.
On two occasions going from DATA to AM it froze completely and wouldn’t
respond to any button and had to be powered off at the power supply.

Here’s what I have tried so far:

1. Since the “gold pin” mod hasn’t been done, I pulled the front panel,
cleaned all the pins and replaced it. No change.

2. After it froze completely the second time, I forced an EEINIT, reloaded
a good configuration. No change.

So it appears to be a hardware problem. I haven’t contacted Elecraft yet
because they seem to be in flux right now due to COVID and the push to get
the K4 out the door. Plus, I do have a quick work-around as long as I avoid
the total freeze.

So if anyone has had a similar problem and solution or could tell me where
to look I would appreciate it.
Thanks,
Don, K5DW
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] K3 on motorboat.

[Donald Wines]

Apparently they are a two person company located in Oakwood, TX a small
town of about 3000 good folk located about an 1-1/2 hours southeast of my
QTH in Bullard, TX.
You can check them out here
https://www.corporationwiki.com/p/2s9ylr/advanced-hf-solutions-inc.
The price on this thing is almost $10K.

Don,
K5DW


On Wed, Jun 10, 2020 at 7:19 AM  wrote:

> Where is this company?  I dd not see any information about them on the
> website.
>
> John KK9A
>
>
>
> Michael Chowning N8TTR wrote:
>
> https://advancedhfsolutions.com
>
> Mike, N8TTR
>
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to k5dw...@gmail.com
>
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] KXPA100 Question

[Donald Wines]

Grant,

Something else I've noticed since getting the KXPA100 is the Select knob on
the PX3 gets flaky if it's turned too fast. It seems to work fine if you
turn it slowly. For instance when setting the Ref Level if the Select
control is turned very fast the display just jitters and doesn't change the
level. But when turned at a very slow rate the level changes appropriately.
I didn't notice this behavior before I put the KXPA in line.

You might try that and let me know what happens.

Thanks,
Don, K5DW

On Sun, Aug 18, 2019 at 2:41 PM Grant Youngman  wrote:

> Don …
>
> Thanks.  That answers my question.  You’re right, it’s close enough if
> you’re tuning slowly, but if you try to tune quickly the PX3 cursor doesn’t
> follow so well.
>
> Grant NQ5T
> KX3 (8342)/KXPA100
>
>
>
>
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] KXPA100 Question

[Donald Wines]

Grant,

Don’t know if it’s normal behavior but my setup is exactly like yours and the 
behavior is the same. Especially noticeable at a high tuning rate. I bought the 
KXPA100 from an individual but it had never been used, essentially new.

Don, K5DW

Sent from my iPad

> On Aug 18, 2019, at 1:16 PM, Grant Youngman  wrote:
> 
> Just got a shiny new KXPA100.  
> 
> I’m using “tight” integration with my KX3.  The one downside I’ve observed is 
> that when PA Mode is On, the cursor display on the PX3 gets jerky and doesn’t 
> follow well.  It isn’t terrible, just jerky.  I assume this is the result of 
> the KXPA adding data load through the PX3.
> 
> Can anyone confirm for me if this is normal behavior, or if I should be 
> looking elsewhere?
> 
> Thanks ..
> 
> Grant NQ5T
> KX3 (8342)/KXPA100
> 
> 
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to k5dw...@gmail.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] FS: Navigator Sound Card Modem

[Donald Wines]

Since I no longer am much interested in the digital modes and need to clear
some space, I am offering for sale a US Interface Navigator sound card
modem. This is the older model (silver) before Timewave bought out US
Interface. It works great and is a 9 out 10 cosmetically (some minor rub
marks on the top) and has always lived in a non-smoking environment. It has
Winkey keyer built-in and the firmware has been upgraded to Rev. B. (CD
included.) It includes three (3) sets of cables: 1 each for Elecraft K3,
Elecraft KX3 and Icom 706MKIIG. The K3 cable set is for the older K3's with
the standard RS232 nine pin serial interface. The others should work out of
the box.

Also included is a full set of documentation.

See pictures here: *https://tinyurl.com/yayeqzly
*

Asking $180 for everything listed above shipped to any CONUS location by
USPS Priority Mail.

If interested please reply to my private email address: k5dwdon at gmail
dot com. I'll be glad to answer any questions I can.

Thanks for the BW!

Don Wines
K5DW
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] WTB: KXPA100

[Donald Wines]

Oops. Fat fingered!

To Continue:  Thanks for the BW.

Don, K5DW
k5dwdon at gmail dot com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] WTB: KPXA100

[Donald Wines]

Before I take the leap and order from the mother ship does anyone have a
good used KXPA100 that is excess to their needs or are looking to upgrade?

If so, please contact me off list with price info.

Thanks for the BW,
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] (no subject) (HRD and K3 and VISTA)

[Donald Wines]

Susan, are you running through an interface? What kind of cable are you
using? HRD requires that you use a comm port that is not shared with other
processes.

I'm running Vista on a Dell laptop with HRD v5/DM780 through a Navigator
interface to the K3. Have no problems except as Nick has already noted. HRD
freaks if it loses comm with the radio.

Don
K5DW

 -Original Message-
 From: elecraft-boun...@mailman.qth.net [mailto:elecraft-
 boun...@mailman.qth.net] On Behalf Of Nick-WA5BDU
 Sent: Friday, July 02, 2010 1:01 PM
 To: elecraft@mailman.qth.net
 Subject: Re: [Elecraft] (no subject) (HRD and K3 and VISTA)
 
 I do.  It works pretty well but HRD does lock up if I turn off the K3
 before stopping HRD.  I use the newest HRD version for which the
 logbook
 is separate.  I think this is version 5.
 
 Running Vista on a Dell inspiron 1525 laptop.
 
 73-
 
 Nick, WA5BDU


 -Original Message-
 From: elecraft-boun...@mailman.qth.net [mailto:elecraft-
 boun...@mailman.qth.net] On Behalf Of ussv dharma
 Sent: Friday, July 02, 2010 12:40 PM
 To: Elecraft Reflector; Lee Buller; Ken Roberson
 Subject: [Elecraft] (no subject)
 
 Is anyone using Ham radio Deluxe, Vista, AND  K3I cant get it to
 run over three to four minutes.
 
 Susan
 
 
 If you don't change direction you WILL arrive exactly where you're
 headed!! Susan Meckley, Skipper W7KFI-mm
 AFA9SM USSV DHARMA
 
 
 --- On Fri, 7/2/10, Ken Roberson kwrober...@yahoo.com wrote:
 
  From: Ken Roberson kwrober...@yahoo.com
  Subject: Re: [Elecraft] WJST and the K3
  To: Elecraft Reflector elecraft@mailman.qth.net, Lee Buller
 k...@swbell.net
  Date: Friday, July 2, 2010, 7:36 AM
  Lee,
 
  99% of all digi modes are on USB, However I use the digi
  mode on the K3.
  In WSJT program Go to setup , Option , then select your com
  port.
 
  GL 73 Ken K5DNL
 
  -
 
  --- On Fri, 7/2/10, Lee Buller k...@swbell.net
  wrote:
 
   From: Lee Buller k...@swbell.net
   Subject: [Elecraft] WJST and the K3
   To: Elecraft Reflector elecraft@mailman.qth.net
   Date: Friday, July 2, 2010, 12:14 PM
  
   OK  I got the 6 meter bug...as you all know by
   now
  
   I have been trying to set up WJST for the K3.  Can
   anyone send me some information as to how to do
  this?
   I am under the impression that it needs to be on SSB -
  but
   can't find information on which sideband.  How do
  you
   key the rig on SSB, it does not want to do so because
  I
   think it wants to see DATA.
  
   I have a SignaLink USB - works great on RTTY and
  PSK...but
   seems to not want to deal with WJST.  I've RTFM
  several
   times but am lost.  Anyone can give me a hint...a
  web
   page to read (I've read a lot of them today)..or
   something...
  
   I am missing something somewhere.  Who is the expert
  I
   can communicate off the list!
  
   Lee K0WA
  
  
 
 ===
 ==
  
    Ham Radio Operators:  Kansas QSO Party is
  August
   28-29, 2010.  See www.ksqsoparty.org for details
  
   In our day and age it seems that Common Sense is in
  short
   supply.  If you don't have any Common Sense - get
  some
   Common Sense and use it.  If you can't find any
  Common
   Sense, ask for help from somebody who has some Common
   Sense.  Is Common Sense divine?
  
   Common Sense is the image of the Creator expressing
   revealed truth in my mind. -  J. Wolf
  
  __
   Elecraft mailing list
   Home: http://mailman.qth.net/mailman/listinfo/elecraft
   Help: http://mailman.qth.net/mmfaq.htm
   Post: mailto:Elecraft@mailman.qth.net
  
   This list hosted by: http://www.qsl.net
   Please help support this email list: http://www.qsl.net/donate.html
  
 
 
 
  __
  Elecraft mailing list
  Home: http://mailman.qth.net/mailman/listinfo/elecraft
  Help: http://mailman.qth.net/mmfaq.htm
  Post: mailto:Elecraft@mailman.qth.net
 
  This list hosted by: http://www.qsl.net
  Please help support this email list: http://www.qsl.net/donate.html
 
 
 __
 Elecraft mailing list
 Home: http://mailman.qth.net/mailman/listinfo/elecraft
 Help: http://mailman.qth.net/mmfaq.htm
 Post: mailto:Elecraft@mailman.qth.net
 
 This list hosted by: http://www.qsl.net
 Please help support this email list: http://www.qsl.net/donate.html

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Elecraft] K3: Mike input no longer works.

[Donald Wines]

It was the bias setting. I knew it had to be something simple!

Thanks, gang, is this list great or what??

Don
K5DW

 -Original Message-
 From: George A. Thornton [mailto:gthorn...@thorntonmostullaw.com]
 Sent: Wednesday, March 31, 2010 7:24 PM
 To: Lew Phelps K6LMP; Donald Wines
 Cc: Elecraft
 Subject: RE: [Elecraft] K3: Mike input no longer works.
 
 If I recall correctly that microphone is an electret.  You have to set
 the bias on the mic setting for it to work.
 
 Go to Main:Mic Sel setting.  While in that setting hit 2 to turn bias
 on
 or off.  You may also want to play with sensitivity setting  (hi or lo)
 by hitting 1.  See manual p.20.  These settings are available for front
 and rear mikes.
 
 -Original Message-
 From: elecraft-boun...@mailman.qth.net
 [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Lew Phelps K6LMP
 Sent: Wednesday, March 31, 2010 4:37 PM
 To: Donald Wines
 Cc: 'Elecraft'
 Subject: Re: [Elecraft] K3: Mike input no longer works.
 
 What filter is set? If you have a narrowband filter installed in
 addition to the stock 2.7K filter, and if you have been working
 CW/digital modes with a narrowband filter, and if the settings somehow
 got messed up on the mode-by-mode filter selection, you might be trying
 to transmit SSB through a narrowband filter.  the K3 doesn't like that.
 
 lew K6LMP
 
 On Mar 31, 2010, at 3:49 PM, Donald Wines wrote:
 
  I haven't been on sideband for several months and this past weekend I
  decided to try to pick up a country or three during the contest.
 
  I switched the K3 over to USB on 15M, put the Heil Proset on, turned
 on VOX
  and gave a little whistle and nothing happened. Tried PTT with no
 luck
 there
  either. I didn't have the time to get into the problem too deep at
 the
 time
  but now I have a little time to devote. I can't really remember the
 last
  time I used SSB but it used to work.
 
  I have tried looking at all the appropriate menu settings and can't
 find
  where I have set something weird. The mike won't work on either the
 front or
  rear panel. The Proset mike works on other equipment.
 
  Here's what I have:
   K3 #123 FW: 3.79 D1: 2.54 D2: 0.00 FL: 1.08
   NO SUB RCVR, NO DVR
   All current mods done by Aptos as of 8 or 9 months ago.
   (don't remember exact date and haven't dug out the paper work)
   Heil Proset Headphones/mike purchased from Elecraft
   VOX Delay: Doesn't matter where it's set
 
  Config settings:
   MIC BTN: OFF
   TX INH: OFF
   PTT KEY: OFF-OFF
   TX ALC: ON
 
  Main Menu settings:
  TX EQ: ALL BASE BAND (BUT OTHER SETTING DON'T SEEM TO MATTER)
   VOX GN: TRIED EVERYTHING - NO MATTER
   ANTIVOX: 
   MIC SEL: RPL (FRONT PANEL DOESN'T WORK EITHER)
   MIC+LIN: OFF
 
  I do have a US Interface Navigator sound card interface connected and
 PSK D
  works ok. I haven't tried all the other digimodes yet. I totally
  disconnected the Navigator but it made no difference.
 
  Have looked at all the obvious things, all plugs in the right holes,
 etc.
  Rig works great otherwise!
 
  It's probably something stupid that I did but does anybody have any
 ideas
  where else to look before I go to the guys and gals in Aptos?
 
  Don
  K5DW
 
  __
  Elecraft mailing list
  Home: http://mailman.qth.net/mailman/listinfo/elecraft
  Help: http://mailman.qth.net/mmfaq.htm
  Post: mailto:Elecraft@mailman.qth.net
 
  This list hosted by: http://www.qsl.net
  Please help support this email list: http://www.qsl.net/donate.html
 
 __
 Elecraft mailing list
 Home: http://mailman.qth.net/mailman/listinfo/elecraft
 Help: http://mailman.qth.net/mmfaq.htm
 Post: mailto:Elecraft@mailman.qth.net
 
 This list hosted by: http://www.qsl.net
 Please help support this email list: http://www.qsl.net/donate.html

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Elecraft] K3: Mike input no longer works.

[Donald Wines]

I haven't been on sideband for several months and this past weekend I
decided to try to pick up a country or three during the contest. 

I switched the K3 over to USB on 15M, put the Heil Proset on, turned on VOX
and gave a little whistle and nothing happened. Tried PTT with no luck there
either. I didn't have the time to get into the problem too deep at the time
but now I have a little time to devote. I can't really remember the last
time I used SSB but it used to work.

I have tried looking at all the appropriate menu settings and can't find
where I have set something weird. The mike won't work on either the front or
rear panel. The Proset mike works on other equipment. 

Here's what I have:
  K3 #123 FW: 3.79 D1: 2.54 D2: 0.00 FL: 1.08
  NO SUB RCVR, NO DVR 
  All current mods done by Aptos as of 8 or 9 months ago.
  (don't remember exact date and haven't dug out the paper work)
  Heil Proset Headphones/mike purchased from Elecraft
  VOX Delay: Doesn't matter where it's set

Config settings:
  MIC BTN: OFF
  TX INH: OFF
  PTT KEY: OFF-OFF
  TX ALC: ON

Main Menu settings:
TX EQ: ALL BASE BAND (BUT OTHER SETTING DON'T SEEM TO MATTER)
  VOX GN: TRIED EVERYTHING - NO MATTER
  ANTIVOX: 
  MIC SEL: RPL (FRONT PANEL DOESN'T WORK EITHER)
  MIC+LIN: OFF

I do have a US Interface Navigator sound card interface connected and PSK D
works ok. I haven't tried all the other digimodes yet. I totally
disconnected the Navigator but it made no difference.

Have looked at all the obvious things, all plugs in the right holes, etc.
Rig works great otherwise!

It's probably something stupid that I did but does anybody have any ideas
where else to look before I go to the guys and gals in Aptos?

Don
K5DW

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Elecraft] K3 owners that have built a K2

[Donald Wines]

Yep.

K2 #789
K1 #123
K3 #123

In that order and wouldn't part with any of 'em!!

BTW: The K1 and K3 serials are correct. Just the luck of the draw!

Don
K5DW

 -Original Message-
 From: elecraft-boun...@mailman.qth.net [mailto:elecraft-
 boun...@mailman.qth.net] On Behalf Of Gary D Krause
 Sent: Tuesday, December 22, 2009 9:26 AM
 To: Elecraft
 Subject: [Elecraft] K3 owners that have built a K2
 
 After seeing a recent post about building a K2, I'm wondering how many
 K3
 owners have actually built a K2?  It would seem that some kind of right
 of
 passage should be given to those people that have built a K2 or even a
 K1,
 before purchasing a K3.  Maybe a sticker that they can put on their K3
 or a
 special certificate to hang on the wall?  Of course, I'm excluding
 those that
 can't build because, of physical dissability.  I'm just thinking of all
 the
 fun that they missed building a K2 and perhaps they would appreciate
 the K3
 even more.  Just trying to stir the pot. ;-)
 
 Gary, N7HTS
 
 
 
 __
 Elecraft mailing list
 Home: http://mailman.qth.net/mailman/listinfo/elecraft
 Help: http://mailman.qth.net/mmfaq.htm
 Post: mailto:Elecraft@mailman.qth.net
 
 This list hosted by: http://www.qsl.net
 Please help support this email list: http://www.qsl.net/donate.html

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Elecraft] K3 on VLF

[Donald Wines]

Jackson Harbor Press has a little converter for 10-300kHz here:
http://home.att.net/~jacksonharbor/lfconv.htm

It can be configured for 80 meters or 30 meters and could probably be
diddled to provide coverage up to 500kHz.

Very inexpensive and works great!

No connection to Jackson Harbor other than a satisfied customer.

Don
K5DW


 -Original Message-
 From: elecraft-boun...@mailman.qth.net [mailto:elecraft-
 boun...@mailman.qth.net] On Behalf Of W5UN
 Sent: Thursday, December 17, 2009 7:13 PM
 To: elecraft@mailman.qth.net
 Subject: [Elecraft] K3 on VLF
 
 I am a K3 owner and user. I have the KRX3 module installed. What do I
 need in order to hear  below 500 kHz? Or is this even possible for
 the K3? Currently, there is a great signal drop off when I tune below 1
 mHz.
 
 Dave, W5UN
 
 __
 Elecraft mailing list
 Home: http://mailman.qth.net/mailman/listinfo/elecraft
 Help: http://mailman.qth.net/mmfaq.htm
 Post: mailto:Elecraft@mailman.qth.net
 
 This list hosted by: http://www.qsl.net
 Please help support this email list: http://www.qsl.net/donate.html

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Elecraft] OT: Items for Sale - Update

[Donald Wines]

The T1 and the Norcal meter have been sold.

These items are still available for the next couple of days.

 Elecraft KRC2 Band Decoder - $140 
  Assembled and tested but never used
  Includes uninstalled parts for the ACC option 

MFJ-868 Giant SWR/Wattmeter HF(20W,200W,2KW) - $110 
  Less than 1 year old   
  Modified with Power-on indicator and
  switch to turn panel lamps on/off.
  Works great, just too big for my small shack.
  Full description here:
http://www.mfjenterprises.com/Product.php?productid=MFJ-868

ATMEL 8-bit RISC Microcontroller Development Kit - $125
  ATSTK500 - Development board for 8 to 40 pin microprocessors ($79 New)
  ATSTK502 - Expansion Board for 64 pin microprocessors with LCD support
($99 New)
  Includes one AT90S8515 40-pin chip and one ATMEGA169L 64-pin chip
  These boards have had very little use. Will throw in an AVR Butterfly.
($20 New)
  Full descriptions here:
  http://www.atmel.com/dyn/products/tools_card.asp?tool_id=2735
(ATSK500)
  http://www.atmel.com/dyn/products/tools_card.asp?tool_id=2906
(ATSK502)
  http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3146
(AVRBFLY)

All prices shipped USA only.

If interested contact me off list: dwines at suddenlink dot net.

Don,
K5DW
K1 #123, K2 #789, K3 #123

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Elecraft] OT: Items For Sale

[Donald Wines]

I'm doing a little shack cleaning and have a few items that are surplus to
my needs.
I am offering them here before I put them on that auction site.

 Elecraft KRC2 Band Decoder - $140 
  Assembled and tested but never used
  Includes uninstalled parts for the ACC option 

 Elecraft T1 20W Automatic Antenna Tuner - $110 
  Assembled, tested and used twice
  Works great with all those single band QRP rigs

 NorCal QRP Power/SWR Meter Kit - $75
  Unbuilt kit, still in original box
  0 - 9.9 Watts, LCD display plus analog meter
  Full description here: http://www.norcalqrp.org/ncpowermeter.htm

MFJ-868 Giant SWR/Wattmeter HF(20W,200W,2KW) - $110 
  Less than 1 year old   
  Modified with Power-on indicator and
  switch to turn panel lamps on/off.
  Works great, just too big for my small shack.
  Full description here:
http://www.mfjenterprises.com/Product.php?productid=MFJ-868

ATMEL 8-bit RISC Microcontroller Development Kit - $125
  ATSTK500 - Development board for 8 to 40 pin microprocessors ($79 New)
  ATSTK502 - Expansion Board for 64 pin microprocessors with LCD support
($99 New)
  Includes one AT90S8515 40-pin chip and one ATMEGA169L 64-pin chip
  These boards have had very little use. Will throw in an AVR Butterfly.
($20 New)
  Full descriptions here:
  http://www.atmel.com/dyn/products/tools_card.asp?tool_id=2735
(ATSK500)
  http://www.atmel.com/dyn/products/tools_card.asp?tool_id=2906
(ATSK502)
  http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3146
(AVRBFLY)

All prices shipped USA only.

If interested contact me off list: dwines at suddenlink dot net.

Don,
K5DW
K1 #123, K2 #789, K3 #123

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Elecraft] K2 Monitoring outgoing PSK31 Signal

[Donald Wines]

I believe the IMD meter is still available here:
http://usinterface.com/naviusa_002.htm

Don,
K5DW

Julian, G4ILO wrote:

 There used to be a very useful tool called the IMD Meter designed by
 KK7UQ
 which you could buy from US Interface. Sadly it appears to be no longer
 available since the owner of US Interface became a SK. You can still
 find
 information about it if you use Google. If anyone knows where you can
 still
 get these things I'd like to know, because I have one and wrote about
 it on
 my website, and I'm often asked where you can get them from.



__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html