[Elecraft] K3 Frequency Memory Editor Software bug
Can anyone confirm a problem I seem to be having with the K3 Frequency Memory Editor software? If I try to set memory frequencies for transverters in the XVn memories above 2.3GHz I get an error message, and if I set a memory directly on the K3 and then read it back with the utility it shows up as a frequency that has no obvious relationship to that set on the K3. This seems to be the case for any band above 2.3GHz. A previous version of the utility worked OK on 2.3 and 3.4GHz but failed on 5.7GHz and above, and the error message with that version makes me think its an overflow in a 32 bit integer variable used to represent the frequency. 73 John G3XDY K3 #00689 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3/KX3 Operating Tip: APF (audio peaking, filter) for weak-signal CW work
I find the K3 APF invaluable for weak signal work on the microwaves. In the microwave NAC contest last night I worked three stations over 600km on 2.3 and 3.4GHz by aircraft reflection, and the APF really helped pull the weak signals out of the noise. I generally use 1kHz width for CW and my ears for the rest of the filtering, but the APF makes a really big difference on those signals that seem just too weak to copy. The only disadvantage is the hold rather than tap to switch it on/off - I often find I end up having to reset the filter width when I try to cancel the APF . -- 73 John G3XDY K3 #0689 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] K3 External Reference Locking Progress?
Some months back Wayne posted details of how the external reference locking would work for the K3, and I recollect that field test was imminent. Since then it has been very quiet. Having just finished GPS locking my 23cm transverter it would be nice to get the K3 tied into the system too. Does anyone know of progress on this option? 73 John G3XDY K3 #689 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] P3 with a Transverter
I get exactly the same symptoms as Graham G3TCT. I understand that Alan has this issue high on his P3 bug list! 73 John G3XDY K3 #689 P3 #514 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] P3 Beta 0050 - Transverter issue
I have downloaded the new Beta for the K3 and P3, all seems to be working OK on the HF bands, but I seem to have a problem with the P3 when using my 23cm transverter on Xvtr Band 4 (converting to 28MHz). On all the other bands I can get the usual panadaptor and waterfall displays, but on 23cm there is no spectrum display on the panadapter (for any signal level or ref level) but the waterfall turns bright red across the screen. When first powered on I can see what looks like a correct display for a second or two, then it disappears. The P3 transverter gain calibration setting does not appear to do anything, having selected band 4, pressing the knob again gives an onscreen display of nan and turning/pressing the select knob has no effect. Anyone seen similar symptoms? 73 John G3XDY K3 #689 P3 #514 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] P3 Beta 0050 - Transverter issue
Thanks Alan, a Parameter Initialization seems to have sorted it out OK. By the way its on P26 of the current manual on the website. The new fixed tune mode is exactly what I was waiting for, thanks to all at Elecraft for the continuing evolution. 73 John G3XDY - Original Message - From: Alan Bloom a...@elecraft.com To: G3XDY g3...@btinternet.com Cc: elecraft@mailman.qth.net Sent: Sunday, January 16, 2011 4:50 PM Subject: Re: [Elecraft] P3 Beta 0050 - Transverter issue John, That's a strange one. The transverter gain is supposed to default to 25 dB. If you can't adjust it with MENU:XV Gain, then you might try the Parameter Initialization procedure on page 24 of the manual. Alan N1AL On Sun, 2011-01-16 at 16:17 +, G3XDY wrote: I have downloaded the new Beta for the K3 and P3, all seems to be working OK on the HF bands, but I seem to have a problem with the P3 when using my 23cm transverter on Xvtr Band 4 (converting to 28MHz). On all the other bands I can get the usual panadaptor and waterfall displays, but on 23cm there is no spectrum display on the panadapter (for any signal level or ref level) but the waterfall turns bright red across the screen. When first powered on I can see what looks like a correct display for a second or two, then it disappears. The P3 transverter gain calibration setting does not appear to do anything, having selected band 4, pressing the knob again gives an onscreen display of nan and turning/pressing the select knob has no effect. Anyone seen similar symptoms? 73 John G3XDY K3 #689 P3 #514 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] Softrock based panadapter for K3 for sale
Following the arrival of my P3 I have a Softrock based panadater system for the K3 for sale. It consists of a 8.192MHz centred Softrock with transformer coupled audio output, a Z1 buffer amp and Z10010 IF filter from K8ZOA, an EMU1212M PCI Card for the PC, and includes interconnecting cables. The panadapter is built into a diecast case. Photos are available, please contact me off-list if interested. I'm asking £150 plus postage. 73 John G3XDY __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] K3 - Linking the VFOs for CW - SSB switching
Like a few other VHF and up types I'm patiently waiting for the Auto CW capability on the K3, where it sends on CW if you press the key and on SSB if you use the Mic PTT, with a frequency offset between the two equal to the sidetone frequency. I have found a useful work around for now is to link the two VFOs with an offset equal to the sidetone pitch, with the higher frequency one set to CW REV and the lower on USB. Toggling the VFO A/B button then gives instant changeover from SSB to CW without having to retune. I hope to give this a work out in the European VHF/UHF/SHF contest this weekend. 73 John G3XDY K2 #4713 K3 #689 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] Re: Auto CW function
I think this was covered in the FAQ on 6m topics: Is it possible to have automatic VFO offset when switching from SSB to CW to SSB? The VFO offset should be the same as the selected transmit/spotting sidetone frequency. For example, if you are on 50125.00 kHz USB and you switch to CW mode, the VFO automatically switches to 50125.70 kHz (if the specified sidetone frequency is 700 Hz). This puts the audible CW signal in the USB passband. AND Can the K3 be configured to automatically change to CW mode when the key is activated and to SSB when a PTT line is keyed? These features will not be in the initial firmware release, but should be available in the second release. Exact functionality TBD. That was one reason I decided to order a K3 late last year, primarily for UHF and above contesting. I'm not very clear what the second release might mean, but I guess we are talking about V 2.xx rather than an evolution of the current V1.69 code? 73 John G3XDY K2 #4713, K3 ??? - Original Message - From: [EMAIL PROTECTED] To: elecraft@mailman.qth.net Sent: Saturday, February 23, 2008 6:46 PM Subject: Elecraft Digest, Vol 46, Issue 43 Message: 6 Date: Sat, 23 Feb 2008 12:41:47 +0100 From: Alexandr Kobranov [EMAIL PROTECTED] Subject: [Elecraft] Auto CW function To: elecraft@mailman.qth.net Message-ID: [EMAIL PROTECTED] Content-Type: text/plain; charset=ISO-8859-1; format=flowed Hello all, is there some support for request for AUTO CW ON/OFF firmware function as some rigs are having (FT-897)? It means SSB mode choosed, RX in SSB mode normally but when Key is activated (touched for CW sending) there is automatic shift of carrier and CW is transmitted (as in standard CW mode, SEMI or FULL-BK etc.) then going back to SSB mode for RX. Hope you understand :-) This is very useful during UHF/SHF contests (with transverters) when calling CW CQ but takers are calling in SSB (mostly or very often). No need for switching mode (you have SSB all the time) and to touch dial knob to reply etc. Very comfortable and (I hope) not so serious for firmware. I know this is very special and on HF bands there is probably no reason for such function, my experience is based on serious contesting on higher bands (1296 and up). If this is already somewhere inside and I missed something and my sorry for this Q. 73! Lexa, ok1dst K3 *** ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] Re: Improvement changes to K2 and K1 transceivers
I have not seen anyone ask yet for the way the frequency changes when switching from SSB to CW to be changed. I want to be able to call CQ on SSB, hear a weak station calling on CW and switch to CW to return the call without having to retune. This is a fairly common scenario when using the K2 for weak signal microwave work via transverters. I hope the K3 does have this capability, I will seriously consider changing my IC756 if that is the case (and if the noise blanker suppresses radar signals better than the K2 manages). 73 John G3XDY ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] Re: Elecraft K2 IF for EME
I don't use my K2 for EME but it is my main rig for microwave weak signal work, largely on CW. I tend to use the SSB filter for CW and rely on my ears for filtering, and have not found filter ripple to be a significant problem. On the plus side it is nice to have direct read out of frequencies on the microwave bands (though truncated), and the ability to offset the display to take out the microwave LO offsets is very nice. The ability to set different power levels for each transverter band is also very handy. On the negative side, my noise blanker won't touch radar QRM, whereas my IC756 is very good at removing it, so I stick with the 756 on 23cm where radar is prevalent in Europe. The other problem is the level of birdies on receive in the European beacon band in particular (28.8 - 29.0 after transverting). This makes beacon searching a rather tedious process as it takes a while to hear the keying to decide if the signals are real or not. 73 John G3XDY ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] Re: Installing the K2 Tilt Bail
I found an easy way to fix the tilt bail was to tie a few turns of string or thin cord around the bail and tighten it up with a rod looped through the cord and twisted a few turns - just adjust the tension until the bail fits easily between the feet, fix the feet and then release the cord. 73 John G3XDY K2 #4713 I've posted this method several times over the past several years, but it appears that another posting might be in order. One of the true TESTS of the Elecraft builder's good nature is the installation of one of those (damned) tilt bails!!! They are terribly stiff and will try anyone's patience. After a couple years of periodic frustration, here's how I now do it... One of the worst parts of installing the front feet and tilt bail on is trying to fight the bail while having such a small amount of working distance between the bottom cover of the radio and the feet. So... Initially, DO NOT use the 4-40 x 7/16 screws specified in the assembly manual. Find (somewhere) four (4) 4-40 x 1 screws and use them to install the feet AND the bail... this extra length gives you MORE than ample 'fighting room' when you are installing the bail. Once the long screws have been snugged down, and the feet and bail have been properly seated, replace (one-at-a-time) each of the longer 4-40 screws with the 4-40 x 7/16 screws specified in the manual. Since the feet and bail will be held securely in place by the remaining (already tightened) screws, replacement will be a snap and you won't have that overwhelming urge to heave the radio (or at least the bottom cover) up against the wall. Works fer me! 73, Tom Hammond N0SS ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com